aboutsummaryrefslogtreecommitdiff
path: root/scripts/kconfig
AgeCommit message (Collapse)Author
2009-08-18kconfig: enable CONFIG_IKCONFIG from streamline_config.plSteven Rostedt
Ingo Molnar suggested that the streamline_config.pl should enable CONFIG_IKCONFIG to keep the current config in the kernel. Then we can use scripts/extract-ikconfig to find the current modules. This patch changes streamline_config.pl to check if CONFIG_IKCONFIG is not set, and if it is not, it enables it to be a module. [ Impact: make current config options easier to find ] Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: do not warn about modules built inSteven Rostedt
The streamline_config.pl finds all the configs that are needed to compile the currently loaded modules. After it creates the .config file, it tests to make sure all the configs that are needed were set. It only looks at the configs that are modules, it does not look at the builtin configs. This causes unnecessary warnings about modules not being covered. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: streamline_config.pl do not stop with no dependsSteven Rostedt
If a config does not have a prompt, it must be selected. streamline_config.pl keeps track of all configs that select other configs. If a config that does not have a prompt needs to be set to enable a current module, it will include all configs that select it. Note, streamline_config.pl does not enable modules that are not already enabled. It only keeps enabled those that were enabled and might be needed to compile the current modules. The code to find the selects of a config is after the code that adds the depends. But if a config needed selects but had no dependencies, it would not be set. Because the code would stop before getting to the select. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: add make localyesconfig optionSteven Rostedt
This adds the option localyesconfig to make. This is similar to localmodconfig, but after it removes unnecessary modules it runs sed -i s/=m/=y/ on the .config file. It then runs "make silentoldconfig" to fix any wholes that were created by the conversion of modules to core. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: make localmodconfig to run streamline_config.plSteven Rostedt
Running the streamline_config.pl script manually can still be confusing for some users. This patch adds the localmodconfig option. This will automatically run streamline_config.pl on the current .config and then run "make silentoldconfig" to fix any wholes that might have been created. $ make localmodconfig This will remove any module configurations in .config that are not needed to compile the modules that are loaded. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: add streamline_config.pl to scriptsSteven Rostedt
streamline_config.pl is a very powerful tool. For those that install a kernel to a new box using the config file from the distribution know that it can take forever to compile the kernel. Making a custom config file that will still boot your box, but bring down the compile time of the kernel can be quit painful, and to ask someone that reported a bug to do this can be a large burdon since that person may not even know how to build a kernel. This script will perform "lsmod" to find all the modules loaded on the current running system. It will read all the Makefiles to map which CONFIG enables a module. It will read the Kconfig files to find the dependencies and selects that may be needed to support a CONFIG. Finally, it reads the .config file and removes any module "=m" that is not needed to enable the currently loaded modules. The output goes to standard out. Here's a way to run the script. From the Linux directory that holds a distribution .config. $ scripts/kconfig/streamline_config.pl arch/x86/Kconfig > config-sl $ mv .config config-save $ mv config-sl .config $ make oldconfig Now you have a .config that will still build all your modules, but also take much less time to build the kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-07-17kconfig: initialize the screen before using curses(3) functionsArnaud Lacombe
This is needed on non ncurses based implementation to get a properly initialized `stdscr' in main(). Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-07-17kconfig: variable argument lists needs `stdarg.h'Arnaud Lacombe
Fix build on non GNU based platforms. Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kconfig: do not hardcode "include/config/auto.conf" filenameMarkus Heidelberg
Regardless of KCONFIG_AUTOCONFIG, the filename written as a Make target into "include/config/auto.conf.cmd" was always the default one. Of course this doesn't make it work for the Kernel kbuild system, since there the filename is hardcoded at several places in the Makefiles. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kconfig: do not hardcode ".config" filenameMarkus Heidelberg
Rather than hardcoding ".config" use conf_get_configname(), which also respects the environment variable KCONFIG_CONFIG. This fixes "make silentoldconfig" when KCONFIG_CONFIG is used and also suggests the given filename for "Load" and "Save as" in qconf. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kconfig qconf: fix the type of the desktop widgetMarkus Heidelberg
QApplication::desktop() returns a pointer to QDesktopWidget, not to QWidget. Fixes the following compiler error after a quick conversion with 'qt3to4', which occured with g++ 3.4.6 and 4.1.2, but not anymore with 4.3.2. scripts/kconfig/qconf.cc: In constructor 'ConfigMainWindow::ConfigMainWindow()': scripts/kconfig/qconf.cc:1289: error: cannot convert 'QDesktopWidget*' to 'QWidget*' in initialization Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kconfig qconf: add namespace for use of Key_ enum valuesMarkus Heidelberg
They are defined in the 'Qt' namespace. Fixes the following compiler errors after a quick conversion with 'qt3to4', which occured with g++ 3.4.6 and 4.1.2, but not anymore with 4.3.2. scripts/kconfig/qconf.cc: In member function 'virtual void ConfigLineEdit::keyPressEvent(QKeyEvent*)': scripts/kconfig/qconf.cc:311: error: 'Key_Escape' was not declared in this scope scripts/kconfig/qconf.cc:313: error: 'Key_Return' was not declared in this scope scripts/kconfig/qconf.cc:314: error: 'Key_Enter' was not declared in this scope scripts/kconfig/qconf.cc: In member function 'virtual void ConfigList::keyPressEvent(QKeyEvent*)': scripts/kconfig/qconf.cc:653: error: 'Key_Escape' was not declared in this scope scripts/kconfig/qconf.cc:666: error: 'Key_Return' was not declared in this scope scripts/kconfig/qconf.cc:667: error: 'Key_Enter' was not declared in this scope scripts/kconfig/qconf.cc:681: error: 'Key_Space' was not declared in this scope scripts/kconfig/qconf.cc:684: error: 'Key_N' was not declared in this scope scripts/kconfig/qconf.cc:687: error: 'Key_M' was not declared in this scope scripts/kconfig/qconf.cc:690: error: 'Key_Y' was not declared in this scope scripts/kconfig/qconf.cc: In constructor 'ConfigMainWindow::ConfigMainWindow()': scripts/kconfig/qconf.cc:1329: error: 'CTRL' was not declared in this scope scripts/kconfig/qconf.cc:1329: error: 'Key_Q' was not declared in this scope scripts/kconfig/qconf.cc:1331: error: 'Key_L' was not declared in this scope scripts/kconfig/qconf.cc:1333: error: 'Key_S' was not declared in this scope scripts/kconfig/qconf.cc:1340: error: 'Key_F' was not declared in this scope Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kconfig qconf: fix namespace for Horizontal and Vertical enum valuesMarkus Heidelberg
They were used as QSplitter::Horizontal resp. QSplitter::Vertical, but are defined in the 'Qt' namespace. Fixes the following compiler errors after a quick conversion with 'qt3to4', which occured with g++ 3.4.6 and 4.1.2, but not anymore with 4.3.2. scripts/kconfig/qconf.cc: In constructor 'ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow*, const char*)': scripts/kconfig/qconf.cc:1213: error: 'Vertical' is not a member of 'QSplitter' scripts/kconfig/qconf.cc: In constructor 'ConfigMainWindow::ConfigMainWindow()': scripts/kconfig/qconf.cc:1304: error: 'Horizontal' is not a member of 'QSplitter' scripts/kconfig/qconf.cc:1311: error: 'Vertical' is not a member of 'QSplitter' Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kconfig qconf: fix -Wall compiler warningsMarkus Heidelberg
These compiler warnings occure when adding -Wall to HOSTCXXFLAGS in /Makefile scripts/kconfig/qconf.h: In constructor ‘ConfigInfoView::ConfigInfoView(QWidget*, const char*)’: scripts/kconfig/qconf.h:274: warning: ‘ConfigInfoView::menu’ will be initialized after scripts/kconfig/qconf.h:273: warning: ‘symbol* ConfigInfoView::sym’ scripts/kconfig/qconf.cc:922: warning: when initialized here scripts/kconfig/qconf.cc: In member function ‘void ConfigMainWindow::setMenuLink(menu*)’: scripts/kconfig/qconf.cc:1498: warning: enumeration value ‘menuMode’ not handled in switch scripts/kconfig/qconf.cc:1498: warning: enumeration value ‘listMode’ not handled in switch scripts/kconfig/qconf.cc: In member function ‘void ConfigMainWindow::saveSettings()’: scripts/kconfig/qconf.cc:1664: warning: enumeration value ‘menuMode’ not handled in switch scripts/kconfig/qconf.cc:1664: warning: enumeration value ‘listMode’ not handled in switch Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09gitignore: ignore Kconfig i18n filesMarkus Heidelberg
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kconfig: add a note about the deps to the 'silentoldconfig' helpMarkus Heidelberg
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kconfig: fix typo "mconfig" to "menuconfig" in a commentMarkus Heidelberg
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kconfig: handle comment entries within choice/endchoicePeter Korsgaard
Implement support for comment entries within choice groups. Comment entries are displayed visually distinct from normal configs, and selecting them is a no-op. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11kconfig: fix update-po-config to accect backslash in inputSam Ravnborg
Massimo Maiurana reported (slightly edited): ===== In latest 2.6.29 "make update-po-config" fails at msguniq invocation with an "invalid control sequence" error. The offending string is the following, and it's located in drivers/staging/panel/Kconfig:72: "'\e[L' which are specific to the LCD, and a few ANSI codes. The" looks to me like gettext expects strings in printf format, so in this case it thinks "\e" is a control sequence but doesn't recognise it as a valid one. A valid solution would be to tell kxgettext to automatically escape this kind of strings in the */config.pot he produces, so that msguniq would not complain. ===== This patch implements the suggested escaping. Reported-by: Massimo Maiurana <maiurana@gmail.com> Tested-by: Massimo Maiurana <maiurana@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-03-15kconfig: improve seed in randconfigIngo Molnar
'make randconfig' uses glibc's rand function, and the seed of that PRNG is set via: srand(time(NULL)); But 'time()' only increases once every second - freezing the randconfig result within a single second. My Nehalem testbox does randconfig much faster than 1 second and i have a few scripts that do 'randconfig until condition X' loops. Those scripts currently waste a lot of CPU time due to randconfig changing its seed only once per second currently. Change the seed to be micrseconds based. (I checked the statistical spread of the seed - the now.tv_sec*now.tv_usec multiplication there further improves it.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Roman Zippel <zippel@linux-m68k.org> [sam: fix for systems where usec is zero - noticed by Geert Uytterhoeven] Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-03-15kconfig: fix randconfig for choice blocksSam Ravnborg
Ingo Molnar reported that 'make randconfig' was not covering choice blocks properly, resulting in certain config options being left out of randconfig testing altogether. With the following patch we: - properly randomize choice value for normal choice blocks - properly randomize for multi choice blocks - added several comments to explain what is going on The root cause of the bug was that SYMBOL_VALID was set on the symbol representing the choice block so clearing this did the trick initially. But testign revealed a few more issues that is now fixed. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-01-02kconfig: improve error messages for bad source statementsSam Ravnborg
We now say where we detect the second source of a file, and where we detect a recursively source of the same file. This makes it easier to fix such errors. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2009-01-02kconfig: struct property commentedSam Ravnborg
No functional changes Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-01-02kconfig: add comments to symbol flagsSam Ravnborg
No functional changes - only comments. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-01-02kconfig: explain symbol value defaultsSam Ravnborg
Added a few comments - no functional change. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03kconfig: fix options to check-lxdialog.shSam Ravnborg
As noted by Bernhard - fix it up. Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-10-26fix allmodconfig breakageAl Viro
If you use KCONFIG_ALLCONFIG (even with empty file) you get broken allmodconfig/allyesconfig; CONFIG_MODULES gets turned off, with obvious massive fallout. Breakage had been introduced when conf_set_all_new_symbols() got used for allmodconfig et.al. What happens is that sym_calc_value(modules_sym) done in conf_read_simple() sets SYMBOL_VALID on both modules_sym and MODULES. When we get to conf_set_all_new_symbols(), we set sym->def[S_DEF_USER] on everything, but it has no effect on sym->curr for the symbols that already have SYMBOL_VALID - these are stuck. Solution: use sym_clear_all_valid() in there. Note that it makes reevaluation of modules_sym redundant - sym_clear_all_valid() will do that itself. [ Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11512, says Alexey ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-22x86, um: get rid of arch/um/Kconfig.archAl Viro
Teach scripts/kconfig/Makefile and top-level Makefile that arch/*/Makefile is allowed to say Kconfig := <whatever I want instead of arch/blah/Kconfig>. Rewrite arch/um/Kconfig and arch/um/Kconfig.<subarch> so that the latter would be top-level one (and include the pieces of the former). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-29kconfig: readd lost change countzippel@linux-m68k.org
Commit f072181e6403b0fe2e2aa800a005497b748fd284 ("kconfig: drop the ""trying to assign nonexistent symbol" warning") simply dropped the warnings, but it does a little more than that, it also marks the current .config as needed saving, so add this back. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-29kconfig: fix silentoldconfigzippel@linux-m68k.org
Recent changes to oldconfig have mixed up the silentoldconfig handling, so this fixes that by clearly separating that special mode, e.g. KCONFIG_NOSILENTUPDATE is only relevant here, the .config is written as needed. This will also properly close Bug 11230. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-04kconfig: drop the ""trying to assign nonexistent symbol" warningSam Ravnborg
They really stand out now that make *config is less chatty - and they are generally ignored - so drop them. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Adrian Bunk <bunk@kernel.org>
2008-08-04kconfig: always write out .configSam Ravnborg
Always write out .config also in the case where config did not change. This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11230 Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Cc: Adrian Bunk <bunk@kernel.org>
2008-07-30kconfig: scripts/kconfig/zconf.l: add %option noinputAdrian Bunk
gcc 4.3 correctly determines that input() is unused and gives the following warning: <-- snip --> ... HOSTCC scripts/kconfig/zconf.tab.o scripts/kconfig/lex.zconf.c:1628: warning: ‘input’ defined but not used ... <-- snip --> Fix it by adding %option noinput to scripts/kconfig/zconf.l and regeneration of scripts/kconfig/lex.zconf.c_shipped. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25kconfig: make defconfig is no longer chattySam Ravnborg
make defconfig generated a lot of output then noone actually read. Use conf_set_all_new_symbols() to generate the default configuration and avoid the chatty output. A typical run now looks like this: $ make defconfig *** Default configuration is based on 'i386_defconfig' arch/x86/configs/i386_defconfig:13:warning: trying to assign nonexistent symbol SEMAPHORE_SLEEPERS arch/x86/configs/i386_defconfig:176:warning: trying to assign nonexistent symbol PREEMPT_BKL ... arch/x86/configs/i386_defconfig:1386:warning: trying to assign nonexistent symbol INSTRUMENTATION $ As an added benefit we now clearly see the warnings generated in the start of the process. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-07-25kconfig: make oldconfig is now less chattySam Ravnborg
Previously when running "make oldconfig" we saw all the propmt lines from kconfig and noone actully read this. With this patch the user will only see output if there is new symbols. This will be seen as "make oldconfig" runs which does not generate any output. A typical run now looks like this: $ make oldconfig scripts/kconfig/conf -o arch/x86/Kconfig $ If a new symbol is found then we restart the config process like this: $ make oldconfig scripts/kconfig/conf -o arch/x86/Kconfig * * Restart config... * * * General setup * Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y Local version - append to kernel release (LOCALVERSION) [] ... The bahaviour is similar to what we know when running the implicit oldconfig target "make silentoldconfig". "make silentoldconfig" are run as part of the kernel build process if the configuration has changed. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-07-25kconfig: speed up all*config + randconfigSam Ravnborg
Drop the chatty mode when we generate the all*config, randconfig configurations. Ths speeds up the process considerably and noone looked at the output anyway. This patch uses the conf_set_all_new_symbols() function just added to kconfig. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-07-25kconfig: set all new symbols automaticallyRoman Zippel
Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-19kconfig: incorrect 'len' field initialisation ?Christophe Jaillet
1) The field 'len' of the 'gstr' structure seems to track the size of the memory already allocated for the "growable string". So the value of this field should be the same as the 'malloc()' just above, shouldn't it ? Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-04kconfig: fix MAC OS X warnings in menuconfigSam Ravnborg
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Timur Tabi <timur@freescale.com>
2008-05-01kconfig: made check-lxdialog more portableSam Ravnborg
OS-X shell did not like 'echo -e' so implement suggestion from Al Viro to use a more portable construct. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Acked-By: Timur Tabi <timur@freescale.com>
2008-04-28kconfig: add named choice groupRoman Zippel
As choice dependency are now fully checked, it's quite easy to add support for named choices. This lifts the restriction that a choice value can only appear once, although it still has to be within the same group, but multiple choices can be joined by giving them a name. While at it I cleaned up a little the choice type logic to simplify it a bit. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28kconfig: fix choice dependency checkRoman Zippel
Properly check the dependency of choices as a group. Also fix that sym_check_deps() correctly terminates the dependency loop error check (otherwise it would continue printing the dependency chain). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28kconfig: reversed borderlines in inputboxRoel Kluin
Fix reversal of dlg.border.atr and dlg.dialog.atr for draw_box() Makes the inputbox look like expected Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-25kconfig: fix broken target update-po-configSam Ravnborg
Massimo Maiurana reported: In the latest kernel "make update-po-config" fails because it tries to open arch/Kconfig/Kconfig, since the ls command doesn't distinguish between files and directories. Cc: Massimo Maiurana <maiurana@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-13kconfig: fix select in combination with defaultRoman Zippel
> The attached .config (with current -git) results in a compile > error since it contains: > > CONFIG_X86=y > # CONFIG_EMBEDDED is not set > CONFIG_SERIO=m > CONFIG_SERIO_I8042=y > > Looking at drivers/input/serio/Kconfig I simply don't get how this > can happen. You've hit the rather subtle rules of select vs default. What happened is that SERIO is selected to m, but SERIO_I8042 isn't selected so the default of y is used instead. We already had the problem in the past that select and default don't work well together, so this patch cleans this up and makes the rule hopefully more straightforward. Basically now the value is calculated like this: (value && dependency) || select where the value is the user choice (if available and the symbol is visible) or default. In this case it means SERIO and SERIO_I8042 are both set to y due to their default and if SERIO didn't had the default, then the SERIO_I8042 value would be limited to m due to the dependency. I tested this patch with more 10000 random configs and above case is the only the difference that showed up, so I hope there is nothing that depended on the old more complex and subtle rules. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Tested-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03kconfig: ignore select of unknown symbolSam Ravnborg
We have had warnings for a long time about select of unknow symbol but the warnings does not really makes sense since we may select a symbol that is relevant and defined in one arch but not in another arch. And as long as we do not use a common set of Kconfig files for all archs lets just ignore this case. Previously we have used this to find bad uses of select but we need a more relaible method to do so. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-02-03kconfig: mark config as changed when loading an alternate configSam Ravnborg
Michal Zachar <mgzachar@mail.t-com.sk> reported that menuconfig did not save the new config when loading an alternate config unless he altered it manually. Mark config as changed upon load of alternate config fixed this. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: tristate choices with mixed tristate and boolean valuesJan Beulich
Change kconfig behavior so that mixing bool and tristate config settings in a choice is possible and has the desired effect of offering just the tristate options individually if the choice gets set to M, and a normal boolean selection if the choice gets set to Y. Also fix scripts/kconfig/conf's handling of children of choice values - there may be more than one immediate child, and all of them need to be processed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: "Roman Zippel" <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kconfig: remove "enable"Adrian Bunk
Kconfig had a synonym "enable" for "select" that was neither documented nor used. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kconfig: use environment optionRoman Zippel
Use the environment option to provide the ARCH symbol and the KERNELVERSION symbol. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 10:21:46 +0000