| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit ac96a15a0f0c8812a3aaa587b871cd5527f6d736 ]
When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{6A19CC4B-D760-4DE3-B14D-F25EBD0FBCD9}");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{BD0FBCD9-F25E-B14D-4DE3-D7606A19CC4B}");
This issue has been unnoticed because the x86 kernel is most likely built
natively on an x86 host.
The guid field must not be reversed because guid_t is an array of __u8.
Fixes: fa443bc3c1e4 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f54e00e5842663c2cea501bbbdfa572c94348a3 ]
When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*");
The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.
This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).
The uuid field must not be reversed because uuid_t is an array of __u8.
Fixes: 0fc1db9d1059 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbc3d00cf88fda95dbcafee3b38655b7a8f2650a ]
Without this 'else' statement, an "usb" name goes into two handlers:
the first/previous 'if' statement _AND_ the for-loop over 'devtable',
but the latter is useless as it has no 'usb' device_id entry anyway.
Tested with allmodconfig before/after patch; no changes to *.mod.c:
git checkout v6.6-rc3
make -j$(nproc) allmodconfig
make -j$(nproc) olddefconfig
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/before
# apply patch
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/after
diff -r /tmp/before/ /tmp/after/
# no difference
Fixes: acbef7b76629 ("modpost: fix module autoloading for OF devices with generic compatible property")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3a3f1e573a105328a2cca45a7cfbebabbf5e3192 ]
The > comparison should be >= to prevent an out of bounds array
access.
Fixes: 52dc0595d540 ("modpost: handle relocations mismatch in __ex_table.")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56a24b8ce6a7f9c4a21b2276a8644f6f3d8fc14d ]
addend_arm_rel() processes R_ARM_PC24, R_ARM_CALL, R_ARM_JUMP24 in a
wrong way.
Here, test code.
[test code for R_ARM_JUMP24]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
b bar
[test code for R_ARM_CALL]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
push {lr}
bl bar
pop {pc}
If you compile it with ARM multi_v7_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: foo (section: .text) -> (unknown) (section: .init.text)
(You need to use GNU linker instead of LLD to reproduce it.)
Fix the code to make modpost show the correct symbol name.
I imported (with adjustment) sign_extend32() from include/linux/bitops.h.
The '+8' is the compensation for pc-relative instruction. It is
documented in "ELF for the Arm Architecture" [1].
"If the relocation is pc-relative then compensation for the PC bias
(the PC value is 8 bytes ahead of the executing instruction in Arm
state and 4 bytes in Thumb state) must be encoded in the relocation
by the object producer."
[1]: https://github.com/ARM-software/abi-aa/blob/main/aaelf32/aaelf32.rst
Fixes: 56a974fa2d59 ("kbuild: make better section mismatch reports on arm")
Fixes: 6e2e340b59d2 ("ARM: 7324/1: modpost: Fix section warnings for ARM for many compilers")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7c63520f6703a25eebb4f8138fed764fcae1c6f ]
addend_arm_rel() processes R_ARM_ABS32 in a wrong way.
Here, test code.
[test code 1]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
If you compile it with ARM versatile_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> (unknown) (section: .init.data)
(You need to use GNU linker instead of LLD to reproduce it.)
If you compile it for other architectures, modpost will show the correct
symbol name.
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
For R_ARM_ABS32, addend_arm_rel() sets r->r_addend to a wrong value.
I just mimicked the code in arch/arm/kernel/module.c.
However, there is more difficulty for ARM.
Here, test code.
[test code 2]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
int __initdata bar;
int get_bar(void) { return bar; }
With this commit applied, modpost will show the following messages
for ARM versatile_defconfig:
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: get_bar (section: .text) -> foo (section: .init.data)
The reference from 'get_bar' to 'foo' seems wrong.
I have no solution for this because it is true in assembly level.
In the following output, relocation at 0x1c is no longer associated
with 'bar'. The two relocation entries point to the same symbol, and
the offset to 'bar' is encoded in the instruction 'r0, [r3, #4]'.
Disassembly of section .text:
00000000 <get_foo>:
0: e59f3004 ldr r3, [pc, #4] @ c <get_foo+0xc>
4: e5930000 ldr r0, [r3]
8: e12fff1e bx lr
c: 00000000 .word 0x00000000
00000010 <get_bar>:
10: e59f3004 ldr r3, [pc, #4] @ 1c <get_bar+0xc>
14: e5930004 ldr r0, [r3, #4]
18: e12fff1e bx lr
1c: 00000000 .word 0x00000000
Relocation section '.rel.text' at offset 0x244 contains 2 entries:
Offset Info Type Sym.Value Sym. Name
0000000c 00000c02 R_ARM_ABS32 00000000 .init.data
0000001c 00000c02 R_ARM_ABS32 00000000 .init.data
When find_elf_symbol() gets into a situation where relsym->st_name is
zero, there is no guarantee to get the symbol name as written in C.
I am keeping the current logic because it is useful in many architectures,
but the symbol name is not always correct depending on the optimization.
I left some comments in find_tosym().
Fixes: 56a974fa2d59 ("kbuild: make better section mismatch reports on arm")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d0acc76a49aa917c1a455d11d32d34a01e8b2835 ]
find_extable_entry_size() is completely broken. It has awesome comments
about how to calculate sizeof(struct exception_table_entry).
It was based on these assumptions:
- struct exception_table_entry has two fields
- both of the fields have the same size
Then, we came up with this equation:
(offset of the second field) * 2 == (size of struct)
It was true for all architectures when commit 52dc0595d540 ("modpost:
handle relocations mismatch in __ex_table.") was applied.
Our mathematics broke when commit 548acf19234d ("x86/mm: Expand the
exception table logic to allow new handling options") introduced the
third field.
Now, the definition of exception_table_entry is highly arch-dependent.
For x86, sizeof(struct exception_table_entry) is apparently 12, but
find_extable_entry_size() sets extable_entry_size to 8.
I could fix it, but I do not see much value in this code.
extable_entry_size is used just for selecting a slightly different
error message.
If the first field ("insn") references to a non-executable section,
The relocation at %s+0x%lx references
section "%s" which is not executable, IOW
it is not possible for the kernel to fault
at that address. Something is seriously wrong
and should be fixed.
If the second field ("fixup") references to a non-executable section,
The relocation at %s+0x%lx references
section "%s" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
Merge the two error messages rather than adding even more complexity.
Change fatal() to error() to make it continue running and catch more
possible errors.
Fixes: 548acf19234d ("x86/mm: Expand the exception table logic to allow new handling options")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fb27e70f6e408dee5d22b083e7a38a59e6118253 upstream.
modpost now reads CRCs from .*.cmd files, parsing them using strtol().
This is inconsistent with its parsing of Module.symvers and with their
definition as *unsigned* 32-bit values.
strtol() clamps values to [LONG_MIN, LONG_MAX], and when building on a
32-bit system this changes all CRCs >= 0x80000000 to be 0x7fffffff.
Change extract_crcs_for_object() to use strtoul() instead.
Cc: stable@vger.kernel.org
Fixes: f292d875d0dc ("modpost: extract symbol versions from *.cmd files")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 7b4537199a4a ("kbuild: link symbol CRCs at final link,
removing CONFIG_MODULE_REL_CRCS"), module versioning is broken on
some architectures. Loading a module fails with "disagrees about
version of symbol module_layout".
On such architectures (e.g. ARCH=sparc build with sparc64_defconfig),
modpost shows a warning, like follows:
WARNING: modpost: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
Is "_mcount" prototyped in <asm/asm-prototypes.h>?
Previously, it was a harmless warning (CRC check was just skipped),
but now wrong CRCs are used for comparison because invalid CRCs are
just skipped.
$ sparc64-linux-gnu-nm -n vmlinux
[snip]
0000000000c2cea0 r __ksymtab__kstrtol
0000000000c2ceb8 r __ksymtab__kstrtoul
0000000000c2ced0 r __ksymtab__local_bh_enable
0000000000c2cee8 r __ksymtab__mcount
0000000000c2cf00 r __ksymtab__printk
0000000000c2cf18 r __ksymtab__raw_read_lock
0000000000c2cf30 r __ksymtab__raw_read_lock_bh
[snip]
0000000000c53b34 D __crc__kstrtol
0000000000c53b38 D __crc__kstrtoul
0000000000c53b3c D __crc__local_bh_enable
0000000000c53b40 D __crc__printk
0000000000c53b44 D __crc__raw_read_lock
0000000000c53b48 D __crc__raw_read_lock_bh
Please notice __crc__mcount is missing here.
When the module subsystem looks up a CRC that comes after, it results
in reading out a wrong address. For example, when __crc__printk is
needed, the module subsystem reads 0xc53b44 instead of 0xc53b40.
All CRC entries must be output for correct index accessing. Invalid
CRCs will be unused, but are needed to keep the one-to-one mapping
between __ksymtab_* and __crc_*.
The best is to fix all modpost warnings, but several warnings are still
remaining on less popular architectures.
Fixes: 7b4537199a4a ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS")
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the support for -O3 (CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3)
- Fix error of rpm-pkg cross-builds
- Support riscv for checkstack tool
- Re-enable -Wformwat warnings for Clang
- Clean up modpost, Makefiles, and misc scripts
* tag 'kbuild-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
modpost: remove .symbol_white_list field entirely
modpost: remove unneeded .symbol_white_list initializers
modpost: add PATTERNS() helper macro
modpost: shorten warning messages in report_sec_mismatch()
Revert "Kbuild, lto, workaround: Don't warn for initcall_reference in modpost"
modpost: use more reliable way to get fromsec in section_rel(a)()
modpost: add array range check to sec_name()
modpost: refactor get_secindex()
kbuild: set EXIT trap before creating temporary directory
modpost: remove unused Elf_Sword macro
Makefile.extrawarn: re-enable -Wformat for clang
kbuild: add dtbs_prepare target
kconfig: Qt5: tell the user which packages are required
modpost: use sym_get_data() to get module device_table data
modpost: drop executable ELF support
checkstack: add riscv support for scripts/checkstack.pl
kconfig: shorten the temporary directory name for cc-option
scripts: headers_install.sh: Update config leak ignore entries
kbuild: error out if $(INSTALL_MOD_PATH) contains % or :
kbuild: error out if $(KBUILD_EXTMOD) contains % or :
...
|
|
It is not so useful to have symbol whitelists in arrays. With this
over-engineering, the code is difficult to follow.
Let's do it more directly, and collect the relevant code to one place.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The ->symbol_white_list field is referenced in secref_whitelist(),
only when 'fromsec' is data_sections.
/* Check for pattern 2 */
if (match(tosec, init_exit_sections) &&
match(fromsec, data_sections) &&
match(fromsym, mismatch->symbol_white_list))
return 0;
If .fromsec is not data sections, the .symbol_white_list member is
not used by anyone.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This will be useful to define a NULL-terminated array inside a function
call.
Currently, string arrays passed to match() are defined in separate
places:
static const char *const init_sections[] = { ALL_INIT_SECTIONS, NULL };
static const char *const text_sections[] = { ALL_TEXT_SECTIONS, NULL };
static const char *const optim_symbols[] = { "*.constprop.*", NULL };
...
/* Check for pattern 5 */
if (match(fromsec, text_sections) &&
match(tosec, init_sections) &&
match(fromsym, optim_symbols))
return 0;
With the new helper macro, you can list the patterns directly in the
function call, like this:
/* Check for pattern 5 */
if (match(fromsec, PATTERNS(ALL_TEXT_SECTIONS)) &&
match(tosec, PATTERNS(ALL_INIT_SECTIONS)) &&
match(fromsym, PATTERNS("*.contprop.*")))
return 0;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Each section mismatch results in long warning messages. Too much.
Make each warning fit in one line, and remove a lot of messy code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This reverts commit 77ab21adae509c5540956729e2d03bc1a59bc82a.
Even after 8 years later, GCC LTO has not been upstreamed. Also, it said
"This is a workaround". If this is needed in the future, it should be
added in a proper way.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
|
|
The section name of Rel and Rela starts with ".rel" and ".rela"
respectively (but, I do not know whether this is specification or
convention).
For example, ".rela.text" holds relocation entries applied to the
".text" section.
So, the code chops the ".rel" or ".rela" prefix to get the name of
the section to which the relocation applies.
However, I do not like to skip 4 or 5 bytes blindly because it is
potential memory overrun.
The ELF specification provides a more reliable way to do this.
- The sh_info field holds extra information, whose interpretation
depends on the section type
- If the section type is SHT_REL or SHT_RELA, the sh_info field holds
the section header index of the section to which the relocation
applies.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The section index is always positive, so the argument, secindex, should
be unsigned.
Also, inserted the array range check.
If sym->st_shndx is a special section index (between SHN_LORESERVE and
SHN_HIRESERVE), there is no corresponding section header.
For example, if a symbol specifies an absolute value, sym->st_shndx is
SHN_ABS (=0xfff1).
The current users do not cause the out-of-range access of
info->sechddrs[], but it is better to avoid such a pitfall.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
SPECIAL() is only used in get_secindex(). Squash it.
Make the code more readable with more comments.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 9ad21c3f3ecf ("kbuild: try harder to find symbol names in
modpost") added Elf_Sword (in a wrong way), but did not use it at all.
BTW, the current code looks weird.
The fix for the 32-bit part would be:
Elf64_Sword --> Elf32_Sword
(inconsistet prefix, Elf32_ vs Elf64_)
The fix for the 64-bit part would be:
Elf64_Sxword --> Elf64_Sword
(the size is different between Sword and Sxword)
Note:
Elf32_Sword == Elf64_Sword == int32_t
Elf32_Sxword == Elf64_Sxword == int64_t
Anyway, let's drop unused code instead of fixing it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This consists of several fixes and an important feature to discourage
running KUnit tests on production systems. Running tests on a
production system could leave the system in a bad state.
Summary:
- Add a new taint type, TAINT_TEST to signal that a test has been
run.
This should discourage people from running these tests on
production systems, and to make it easier to tell if tests have
been run accidentally (by loading the wrong configuration, etc)
- Several documentation and tool enhancements and fixes"
* tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
Documentation: KUnit: Fix example with compilation error
Documentation: kunit: Add CLI args for kunit_tool
kcsan: test: Add a .kunitconfig to run KCSAN tests
kunit: executor: Fix a memory leak on failure in kunit_filter_tests
clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig
mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro
nitro_enclaves: test: Use kunit_test_suite() macro
thunderbolt: test: Use kunit_test_suite() macro
kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites
kunit: unify module and builtin suite definitions
selftest: Taint kernel when test module loaded
module: panic: Taint the kernel when selftest modules load
Documentation: kunit: fix example run_kunit func to allow spaces in args
Documentation: kunit: Cleanup run_wrapper, fix x-ref
kunit: test.h: fix a kernel-doc markup
kunit: tool: Enable virtio/PCI by default on UML
kunit: tool: make --kunitconfig repeatable, blindly concat
kunit: add coverage_uml.config to enable GCOV on UML
kunit: tool: refactor internal kconfig handling, allow overriding
kunit: tool: introduce --qemu_args
...
|
|
Use sym_get_data() to replace the long code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Since commit 269a535ca931 ("modpost: generate vmlinux.symvers and
reuse it for the second modpost"), modpost only parses relocatable
files (ET_REL).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
This reverts commit 4d10c223baab8be8f717df3625cfece5be26dead.
Commit 37744feebc08 ("sh: remove sh5 support") removed the sh64 support
entirely.
Note:
.cranges was only used for sh64 ever.
Commit 211dc24b8744 ("Remove sh5 and sh64 support") in binutils-gdb
already removed the relevant code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Taint the kernel with TAINT_TEST whenever a test module loads, by adding
a new "TEST" module property, and setting it for all modules in the
tools/testing directory. This property can also be set manually, for
tests which live outside the tools/testing directory with:
MODULE_INFO(test, "Y");
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since commit f02e8a6596b7 ("module: Sort exported symbols"),
EXPORT_SYMBOL* is placed in the individual section ___ksymtab(_gpl)+<sym>
(3 leading underscores instead of 2).
Since then, modpost cannot detect the bad combination of EXPORT_SYMBOL
and __init/__exit.
Fix the .fromsec field.
Fixes: f02e8a6596b7 ("module: Sort exported symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old
tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: Allow to select bash in a modified environment
scripts: kconfig: nconf: make nconfig accept jk keybindings
modpost: use fnmatch() to simplify match()
modpost: simplify mod->name allocation
kbuild: factor out the common objtool arguments
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
kbuild: clean .tmp_* pattern by make clean
kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
kbuild: rebuild multi-object modules when objtool is updated
kbuild: add cmd_and_savecmd macro
kbuild: make *.mod rule robust against too long argument error
kbuild: make built-in.a rule robust against too long argument error
kbuild: check static EXPORT_SYMBOL* by script instead of modpost
parisc: remove arch/parisc/nm
kbuild: do not create *.prelink.o for Clang LTO or IBT
kbuild: replace $(linked-object) with CONFIG options
kbuild: do not try to parse *.cmd files for objects provided by compiler
kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
modpost: squash if...else-if in find_elf_symbol2()
modpost: reuse ARRAY_SIZE() macro for section_mismatch()
...
|
|
Replace the own implementation for wildcard (glob) matching with
a function call to fnmatch().
Also, change the return type to 'bool'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
mod->name is set to the ELF filename with the suffix ".o" stripped.
The current code calls strdup() and free() to manipulate the string,
but a simpler approach is to pass new_module() with the name length
subtracted by 2.
Also, check if the passed filename ends with ".o" before stripping it.
The current code blindly chops the suffix:
tmp[strlen(tmp) - 2] = '\0'
It will cause buffer under-run if strlen(tmp) < 2;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
|
|
The 'static' specifier and EXPORT_SYMBOL() are an odd combination.
Commit 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL*
functions") tried to detect it, but this check has false negatives.
Here is the sample code.
Makefile:
obj-y += foo1.o foo2.o
foo1.c:
#include <linux/export.h>
static void foo(void) {}
EXPORT_SYMBOL(foo);
foo2.c:
void foo(void) {}
foo1.c exports the static symbol 'foo', but modpost cannot catch it
because it is fooled by foo2.c, which has a global symbol with the
same name.
s->is_static is cleared if a global symbol with the same name is found
somewhere, but EXPORT_SYMBOL() and the global symbol do not necessarily
belong to the same compilation unit.
This check should be done per compilation unit, but I do not know how
to do it in modpost. modpost runs against vmlinux.o or modules, which
merges multiple objects, then forgets their origin.
modpost cannot parse individual objects because they may not be ELF but
LLVM IR when CONFIG_LTO_CLANG=y.
Add a simple bash script to parse the output from ${NM}. This works for
CONFIG_LTO_CLANG=y because llvm-nm can dump symbols of LLVM IR files.
Revert 15bfc2348d54.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
When CONFIG_LTO_CLANG=y, additional intermediate *.prelink.o is created
for each module. Also, objtool is postponed until LLVM IR is converted
to ELF.
CONFIG_X86_KERNEL_IBT works in a similar way to postpone objtool until
objects are merged together.
This commit stops generating *.prelink.o, so the build flow will look
similar with/without LTO.
The following figures show how the LTO build currently works, and
how this commit is changing it.
Current build flow
==================
[1] single-object module
$(LD)
$(CC) +objtool $(LD)
foo.c --------------------> foo.o -----> foo.prelink.o -----> foo.ko
(LLVM IR) (ELF) | (ELF)
|
foo.mod.o --/
(LLVM IR)
[2] multi-object module
$(LD)
$(CC) $(AR) +objtool $(LD)
foo1.c -----> foo1.o -----> foo.o -----> foo.prelink.o -----> foo.ko
| (archive) (ELF) | (ELF)
foo2.c -----> foo2.o --/ |
(LLVM IR) foo.mod.o --/
(LLVM IR)
One confusion is that foo.o in multi-object module is an archive
despite of its suffix.
New build flow
==============
[1] single-object module
Since there is only one object, there is no need to keep the LLVM IR.
Use $(CC)+$(LD) to generate an ELF object in one build rule. When LTO
is disabled, $(LD) is unneeded because $(CC) produces an ELF object.
$(CC)+$(LD)+objtool $(LD)
foo.c ----------------------------> foo.o ---------> foo.ko
(ELF) | (ELF)
|
foo.mod.o --/
(LLVM IR)
[2] multi-object module
Previously, $(AR) was used to combine LLVM IR files into an archive,
but there was no technical reason to do so. Use $(LD) to merge them
into a single ELF object.
$(LD)
$(CC) +objtool $(LD)
foo1.c ---------> foo1.o ---------> foo.o ---------> foo.ko
| (ELF) | (ELF)
foo2.c ---------> foo2.o ----/ |
(LLVM IR) foo.mod.o --/
(LLVM IR)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
if ((addr - sym->st_value) < distance) {
distance = addr - sym->st_value;
near = sym;
} else if ((addr - sym->st_value) == distance) {
near = sym;
}
is equivalent to:
if (addr - sym->st_value <= distance) {
distance = addr - sym->st_value;
near = sym;
}
(The else-if block can overwrite 'distance' with the same value).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Move ARRAY_SIZE() from file2alias.c to modpost.h to reuse it in
section_mismatch().
Also, move the variable 'check' inside the for-loop.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
check_sec_ref() does not use the first parameter 'mod'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
The return value of is_arm_mapping_symbol() is unpredictable when "$"
is passed in.
strchr(3) says:
The strchr() and strrchr() functions return a pointer to the matched
character or NULL if the character is not found. The terminating null
byte is considered part of the string, so that if c is specified as
'\0', these functions return a pointer to the terminator.
When str[1] is '\0', strchr("axtd", str[1]) is not NULL, and str[2] is
referenced (i.e. buffer overrun).
Test code
---------
char str1[] = "abc";
char str2[] = "ab";
strcpy(str1, "$");
strcpy(str2, "$");
printf("test1: %d\n", is_arm_mapping_symbol(str1));
printf("test2: %d\n", is_arm_mapping_symbol(str2));
Result
------
test1: 0
test2: 1
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
With the `-z unique-symbol` linker flag or any similar mechanism,
it is possible to trigger the following:
ERROR: modpost: "param_set_uint.0" [vmlinux] is a static EXPORT_SYMBOL
The reason is that for now the condition from remove_dot():
if (m && (s[n + m] == '.' || s[n + m] == 0))
which was designed to test if it's a dot or a '\0' after the suffix
is never satisfied.
This is due to that `s[n + m]` always points to the last digit of a
numeric suffix, not on the symbol next to it (from a custom debug
print added to modpost):
param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0'
So it's off-by-one and was like that since 2014.
Fix this for the sake of any potential upcoming features, but don't
bother stable-backporting, as it's well hidden -- apart from that
LD flag, it can be triggered only with GCC LTO which never landed
upstream.
Fixes: fcd38ed0ff26 ("scripts: modpost: fix compilation warning")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
include/{linux,asm-generic}/export.h defines a weak symbol, __crc_*
as a placeholder.
Genksyms writes the version CRCs into the linker script, which will be
used for filling the __crc_* symbols. The linker script format depends
on CONFIG_MODULE_REL_CRCS. If it is enabled, __crc_* holds the offset
to the reference of CRC.
It is time to get rid of this complexity.
Now that modpost parses text files (.*.cmd) to collect all the CRCs,
it can generate C code that will be linked to the vmlinux or modules.
Generate a new C file, .vmlinux.export.c, which contains the CRCs of
symbols exported by vmlinux. It is compiled and linked to vmlinux in
scripts/link-vmlinux.sh.
Put the CRCs of symbols exported by modules into the existing *.mod.c
files. No additional build step is needed for modules. As before,
*.mod.c are compiled and linked to *.ko in scripts/Makefile.modfinal.
No linker magic is used here. The new C implementation works in the
same way, whether CONFIG_RELOCATABLE is enabled or not.
CONFIG_MODULE_REL_CRCS is no longer needed.
Previously, Kbuild invoked additional $(LD) to update the CRCs in
objects, but this step is unneeded too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
Currently, CONFIG_MODVERSIONS needs extra link to embed the symbol
versions into ELF objects. Then, modpost extracts the version CRCs
from them.
The following figures show how it currently works, and how I am trying
to change it.
Current implementation
======================
|----------|
embed CRC -------------------------->| final |
$(CC) $(LD) / |---------| | link for |
-----> *.o -------> *.o -->| modpost | | vmlinux |
/ / | |-- *.mod.c -->| or |
/ genksyms / |---------| | module |
*.c ------> *.symversions |----------|
Genksyms outputs the calculated CRCs in the form of linker script
(*.symversions), which is used by $(LD) to update the object.
If CONFIG_LTO_CLANG=y, the build process is much more complex. Embedding
the CRCs is postponed until the LLVM bitcode is converted into ELF,
creating another intermediate *.prelink.o.
However, this complexity is unneeded. There is no reason why we must
embed version CRCs in objects so early.
There is final link stage for vmlinux (scripts/link-vmlinux.sh) and
modules (scripts/Makefile.modfinal). We can link CRCs at the very last
moment.
New implementation
==================
|----------|
--------------------------------------->| final |
$(CC) / |---------| | link for |
-----> *.o ---->| | | vmlinux |
/ | modpost |--- .vmlinux.export.c -->| or |
/ genksyms | |--- *.mod.c ------------>| module |
*.c ------> *.cmd -->|---------| |----------|
Pass the symbol versions to modpost as separate text data, which are
available in *.cmd files.
This commit changes modpost to extract CRCs from *.cmd files instead of
from ELF objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
find_symbol() returns the first symbol found in the hash table. This
table is global, so it may return a symbol from an unexpected module.
There is a case where we want to search for a symbol with a given name
in a specified module.
Add sym_find_with_module(), which receives the module pointer as the
second argument. It is equivalent to find_module() if NULL is passed
as the module pointer.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
There were more EXPORT_SYMBOL types in the past. The following commits
removed unused ones.
- f1c3d73e973c ("module: remove EXPORT_SYMBOL_GPL_FUTURE")
- 367948220fce ("module: remove EXPORT_UNUSED_SYMBOL*")
There are 3 remaining in enum export, but export_unknown does not make
any sense because we never expect such a situation like "we do not know
how it was exported".
If the symbol name starts with "__ksymtab_", but the section name
does not start with "___ksymtab+" or "___ksymtab_gpl+", it is not an
exported symbol.
It occurs when a variable starting with "__ksymtab_" is directly defined:
int __ksymtab_foo;
Presumably, there is no practical issue for using such a weird variable
name (but there is no good reason for doing so, either).
Anyway, that is not an exported symbol. Setting export_unknown is not
the right thing to do. Do not call sym_add_exported() in this case.
With pointless export_unknown removed, the export type finally becomes
boolean (either EXPORT_SYMBOL or EXPORT_SYMBOL_GPL).
I renamed the field name to is_gpl_only. EXPORT_SYMBOL_GPL sets it true.
Only GPL-compatible modules can use it.
I removed the orphan comment, "How a symbol is exported", which is
unrelated to sec_mismatch_count. It is about enum export.
See commit bd5cbcedf446 ("kbuild: export-type enhancement to modpost.c")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
|
|
This is a remnant of commit 6543becf26ff ("mod/file2alias: make
modalias generation safe for cross compiling").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
A later commit will add more code to this list_for_each_entry loop.
Before that, move the loop body into a separate helper function.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
|
|
add_intree_flag(), add_retpoline(), and add_staging_flag() are small
enough to be merged into add_header().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
|
|
new_symbol() does two things; allocate a new symbol and register it
to the hash table.
Using a separate function for each is easier to understand.
Replace new_symbol() with hash_add_symbol(). Remove the second parameter
of alloc_symbol().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Currently, sym_add_exported() does not allocate a symbol if the same
name symbol already exists in the hash table.
This does not reflect the real use cases. You can let an external
module override the in-tree one. In this case, the external module
will export the same name symbols as the in-tree one. However,
modpost simply ignores those symbols, then Module.symvers for the
external module loses its symbols.
sym_add_exported() should allocate a new symbol.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
This is currently a warning, but I think modpost should stop building
in this case.
If the same symbol is exported multiple times and we let it keep going,
the sanity check becomes difficult.
Only the legitimate case is that an external module overrides the
corresponding in-tree module to provide a different implementation
with the same interface.
Also, there exists an upstream example that exploits this feature.
$ make M=tools/testing/nvdimm
... builds tools/testing/nvdimm/libnvdimm.ko. This is a mocked module
that overrides the symbols from drivers/nvdimm/libnvdimm.ko.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
modpost dumps the exported symbols into Module.symvers, but currently
in random order because it iterates in the hash table.
Add a linked list of exported symbols in struct module, so we can
iterate on symbols per module.
This commit makes Module.symvers much more readable; the outer loop in
write_dump() iterates over the modules in the order of modules.order,
and the inner loop dumps symbols in each module.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Use the doubly linked list to traverse the list in the added order.
This makes the code more consistent.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
This looks easier to understand (just because this is a pattern in
the kernel code). No functional change is intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Currently, modpost manages unresolved in a singly linked list; it adds
a new node to the head, and traverses the list from new to old.
Use a doubly linked list to keep the order in the symbol table in the
ELF file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
