| Age | Commit message (Collapse) | Author |
|---|
|
Commit 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular
percpu variable") modified the stackprotector check on 32-bit x86 to check
if gcc supports using %fs as canary. Adjust dummy-tools gcc script to pass
this new test by returning "%fs" rather than "%gs" if it detects
-mstack-protector-guard-reg=fs on command line.
Fixes: 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular percpu variable")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config
is really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang
as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
kbuild: Don't remove link-vmlinux temporary files on exit/signal
kbuild: remove the unneeded comments for external module builds
kbuild: make distclean remove tag files in sub-directories
kbuild: make distclean work against $(objtree) instead of $(srctree)
kbuild: refactor modname-multi by using suffix-search
kbuild: refactor fdtoverlay rule
kbuild: parameterize the .o part of suffix-search
arch: use cross_compiling to check whether it is a cross build or not
kbuild: remove ARCH=sh64 support from top Makefile
.gitignore: prefix local generated files with a slash
kbuild: replace LANG=C with LC_ALL=C
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
kbuild: add a script to remove stale generated files
kbuild: update config_data.gz only when the content of .config is changed
.gitignore: ignore only top-level modules.builtin
.gitignore: move tags and TAGS close to other tag files
kernel/.gitgnore: remove stale timeconst.h and hz.bc
usr/include: refactor .gitignore
genksyms: fix stale comment
...
|
|
Merge yet more updates from Andrew Morton:
"This is everything else from -mm for this merge window.
90 patches.
Subsystems affected by this patch series: mm (cleanups and slub),
alpha, procfs, sysctl, misc, core-kernel, bitmap, lib, compat,
checkpatch, epoll, isofs, nilfs2, hpfs, exit, fork, kexec, gcov,
panic, delayacct, gdb, resource, selftests, async, initramfs, ipc,
drivers/char, and spelling"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (90 commits)
mm: fix typos in comments
mm: fix typos in comments
treewide: remove editor modelines and cruft
ipc/sem.c: spelling fix
fs: fat: fix spelling typo of values
kernel/sys.c: fix typo
kernel/up.c: fix typo
kernel/user_namespace.c: fix typos
kernel/umh.c: fix some spelling mistakes
include/linux/pgtable.h: few spelling fixes
mm/slab.c: fix spelling mistake "disired" -> "desired"
scripts/spelling.txt: add "overflw"
scripts/spelling.txt: Add "diabled" typo
scripts/spelling.txt: add "overlfow"
arm: print alloc free paths for address in registers
mm/vmalloc: remove vwrite()
mm: remove xlate_dev_kmem_ptr()
drivers/char: remove /dev/kmem for good
mm: fix some typos and code style problems
ipc/sem.c: mundane typo fixes
...
|
|
Add typo "overflw" for "overflow". This typo was found and fixed in
drivers/clocksource/timer-pistachio.c.
Link: https://lore.kernel.org/lkml/20210305090315.384547-1-drew@beagleboard.org/
Link: https://lkml.kernel.org/r/20210305095151.388182-1-drew@beagleboard.org
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Increase "diabled" spelling error check.
Link: https://lkml.kernel.org/r/20210304070106.2313-1-zuoqilin1@163.com
Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add typo "overlfow" for "overflow". This typo was found and fixed in
net/sctp/tsnmap.c.
Link: https://lore.kernel.org/netdev/20210304055548.56829-1-drew@beagleboard.org/
Link: https://lkml.kernel.org/r/20210304072657.64577-1-drew@beagleboard.org
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
arm64 uses SP_EL0 to save the current task_struct address. While running
in EL0, SP_EL0 is clobbered by userspace. So if the upper bit is not 1
(not TTBR1), the current address is invalid. This patch checks the upper
bit of SP_EL0, if the upper bit is 1, lx_current() of arm64 will return
the derefrence of current task. Otherwise, lx_current() will tell users
they are running in userspace(EL0).
While arm64 is running in EL0, it is actually pointless to print current
task as the memory of kernel space is not accessible in EL0.
Link: https://lkml.kernel.org/r/20210314203444.15188-3-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "scripts/gdb: clarify the platforms supporting lx_current and add arm64 support", v2.
lx_current depends on per_cpu current_task variable which exists on x86
only. so it actually works on x86 only. the 1st patch documents this
clearly; the 2nd patch adds support for arm64.
This patch (of 2):
x86 is the only architecture which has per_cpu current_task:
arch$ git grep current_task | grep -i per_cpu
x86/include/asm/current.h:DECLARE_PER_CPU(struct task_struct *, current_task);
x86/kernel/cpu/common.c:DEFINE_PER_CPU(struct task_struct *, current_task) ____cacheline_aligned =
x86/kernel/cpu/common.c:EXPORT_PER_CPU_SYMBOL(current_task);
x86/kernel/cpu/common.c:DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
x86/kernel/cpu/common.c:EXPORT_PER_CPU_SYMBOL(current_task);
x86/kernel/smpboot.c: per_cpu(current_task, cpu) = idle;
On other architectures, lx_current() will lead to a python exception:
(gdb) p $lx_current().pid
Python Exception <class 'gdb.error'> No symbol "current_task" in current context.:
Error occurred in Python: No symbol "current_task" in current context.
To avoid more people struggling and wasting time in other architectures,
document it.
Link: https://lkml.kernel.org/r/20210314203444.15188-1-song.bao.hua@hisilicon.com
Link: https://lkml.kernel.org/r/20210314203444.15188-2-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If we store the relative path, the user might later cd to a different
directory, and that would break the automatic symbol resolving that
happens when a module is loaded into the target kernel. Fix this by
storing the abspath() of each path given, just like we already do for the
cwd (os.getcwd() is absolute.)
Link: https://lkml.kernel.org/r/20201217091747.bf4332cf2b35.I10ebbdb7e9b80ab1a5cddebf53d073be8232d656@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The devm_ variant of 'kcalloc()' and 'kmalloc_array()' are not tested
Add the corresponding check.
Link: https://lkml.kernel.org/r/205fc4847972fb6779abcc8818f39c14d1b45af1.1618595794.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__must_be_array, offsetof, sizeof_field and __stringify are all
preprocessor macros and do not evaluate their arguments. As such, it is
safe not to warn when arguments are being reused in those four
sub-expressions.
Exclude those so that they can pass checkpatch.
Link: https://lkml.kernel.org/r/20210407105042.25380-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
return sysfs_emit() uses should include a newline.
Suggest adding a newline when one is missing.
Add one using --fix too.
Link: https://lkml.kernel.org/r/aa1819fa5faf786573df298e5e2e7d357ba7d4ad.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the memtest= kernel command-line argument.
- Support for building the kernel with FORTIFY_SOURCE.
- Support for generic clockevent broadcasts.
- Support for the buildtar build target.
- Some build system cleanups to pass more LLVM-friendly arguments.
- Support for kprobes.
- A rearranged kernel memory map, the first part of supporting sv48
systems.
- Improvements to kexec, along with support for kdump and crash
kernels.
- An alternatives-based errata framework, along with support for
handling a pair of errata that manifest on some SiFive designs
(including the HiFive Unmatched).
- Support for XIP.
- A device tree for the Microchip PolarFire ICICLE SoC and associated
dev board.
... along with a bunch of cleanups. There are already a handful of fixes
on the list so there will likely be a part 2.
* tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (45 commits)
RISC-V: Always define XIP_FIXUP
riscv: Remove 32b kernel mapping from page table dump
riscv: Fix 32b kernel build with CONFIG_DEBUG_VIRTUAL=y
RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
RISC-V: Enable Microchip PolarFire ICICLE SoC
RISC-V: Initial DTS for Microchip ICICLE board
dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC
RISC-V: Add Microchip PolarFire SoC kconfig option
RISC-V: enable XIP
RISC-V: Add crash kernel support
RISC-V: Add kdump support
RISC-V: Improve init_resources()
RISC-V: Add kexec support
RISC-V: Add EM_RISCV to kexec UAPI header
riscv: vdso: fix and clean-up Makefile
riscv/mm: Use BUG_ON instead of if condition followed by BUG.
riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe
riscv: Set ARCH_HAS_STRICT_MODULE_RWX if MMU
riscv: module: Create module allocations without exec permissions
riscv: bpf: Avoid breaking W^X
...
|
|
Pull documentation fixes from Jonathan Corbet:
"A few late-arriving documentation fixes, including some oprofile
cleanup, a kernel-doc fix, some regression-reporting updates, and the
usual minor fixes"
* tag 'docs-5.13-2' of git://git.lwn.net/linux:
Enlisted oprofile version line removed
oprofiled version output line removed from the list
Removed the oprofiled version option
docs: reporting-issues.rst: CC subsystem and maintainers on regressions
docs: correct URL to bios and kernel developer's guide
docs/core-api: Consistent code style
docs/zh_CN: Adjust order and content of zh_CN/index.rst
Documentation: input: joydev file corrections
docs: Fix typo in Documentation/x86/x86_64/5level-paging.rst
kernel-doc: Add support for __deprecated
|
|
Keep them around until they are cleaned up by make clean. This
uses a bit more disk space, but makes it easier to debug any
problems with the kernel link process.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Improve the readability slightly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Rename overlay-y to multi-dtb-y, which is a consistent name with
multi-obj-y. Also, use multi-search to avoid code duplication.
Introduce real-dtb-y, which is a consistent name with real-obj-y,
to contain primitive blobs compiled from *.dts. This is used to
calculate the list of *.dt.yaml files.
Set -@ to base DTB without using $(eval ).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The suffix-search macro hard-codes the suffix, '.o'.
Make it a parameter so that the multi-search and real-search macros
can be reused for foo-dtbs syntax introduced by commit 15d16d6dadf6
("kbuild: Add generic rule to apply fdtoverlay").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Removed the oprofiled version option
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/c98fa38b74bdd8ab16d35862895dac5f5a535f94.1619181632.git.unixbhaskar@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New feature:
- A new "func-no-repeats" option in tracefs/options directory.
When set the function tracer will detect if the current function
being traced is the same as the previous one, and instead of
recording it, it will keep track of the number of times that the
function is repeated in a row. And when another function is
recorded, it will write a new event that shows the function that
repeated, the number of times it repeated and the time stamp of
when the last repeated function occurred.
Enhancements:
- In order to implement the above "func-no-repeats" option, the ring
buffer timestamp can now give the accurate timestamp of the event
as it is being recorded, instead of having to record an absolute
timestamp for all events. This helps the histogram code which no
longer needs to waste ring buffer space.
- New validation logic to make sure all trace events that access
dereferenced pointers do so in a safe way, and will warn otherwise.
Fixes:
- No longer limit the PIDs of tasks that are recorded for
"saved_cmdlines" to PID_MAX_DEFAULT (32768), as systemd now allows
for a much larger range. This caused the mapping of PIDs to the
task names to be dropped for all tasks with a PID greater than
32768.
- Change trace_clock_global() to never block. This caused a deadlock.
Clean ups:
- Typos, prototype fixes, and removing of duplicate or unused code.
- Better management of ftrace_page allocations"
* tag 'trace-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (32 commits)
tracing: Restructure trace_clock_global() to never block
tracing: Map all PIDs to command lines
ftrace: Reuse the output of the function tracer for func_repeats
tracing: Add "func_no_repeats" option for function tracing
tracing: Unify the logic for function tracing options
tracing: Add method for recording "func_repeats" events
tracing: Add "last_func_repeats" to struct trace_array
tracing: Define new ftrace event "func_repeats"
tracing: Define static void trace_print_time()
ftrace: Simplify the calculation of page number for ftrace_page->records some more
ftrace: Store the order of pages allocated in ftrace_page
tracing: Remove unused argument from "ring_buffer_time_stamp()
tracing: Remove duplicate struct declaration in trace_events.h
tracing: Update create_system_filter() kernel-doc comment
tracing: A minor cleanup for create_system_filter()
kernel: trace: Mundane typo fixes in the file trace_events_filter.c
tracing: Fix various typos in comments
scripts/recordmcount.pl: Make vim and emacs indent the same
scripts/recordmcount.pl: Make indent spacing consistent
tracing: Add a verifier to check string pointers for trace events
...
|
|
The pattern prefixed with '/' matches files in the same directory,
but not ones in sub-directories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Andra Paraschiv <andraprs@amazon.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Gabriel Krisman Bertazi <krisman@collabora.com>
|
|
LANG gives a weak default to each LC_* in case it is not explicitly
defined. LC_ALL, if set, overrides all other LC_* variables.
LANG < LC_CTYPE, LC_COLLATE, LC_MONETARY, LC_NUMERIC, ... < LC_ALL
This is why documentation such as [1] suggests to set LC_ALL in build
scripts to get the deterministic result.
LANG=C is not strong enough to override LC_* that may be set by end
users.
[1]: https://reproducible-builds.org/docs/locales/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Matthias Maennich <maennich@google.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> (mptcp)
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We maintain .gitignore and Makefiles so build artifacts are properly
ignored by Git, and cleaned up by 'make clean'. However, the code is
always changing; generated files are often moved to another directory,
or removed when they become unnecessary. Such garbage files tend to be
left over in the source tree because people usually git-pull without
cleaning the tree.
This is not only the noise for 'git status', but also a build issue
in some cases.
One solution is to remove a stale file like commit 223c24a7dba9 ("kbuild:
Automatically remove stale <linux/version.h> file") did. Such workaround
should be removed after a while, but we forget about that if we scatter
the workaround code in random places.
So, this commit adds a new script to collect cleanings of stale files.
As a start point, move the code in arch/arm/boot/compressed/Makefile
into this script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
(shipped source) is a stale comment.
Since commit 833e62245943 ("genksyms: generate lexer and parser during
build instead of shipping"), there is no source file to be shipped in
this directory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
cmd_shipped uses 'cat' instead of 'cp' for copying a file. The reason
is explained in the commit [1], but it was in the pre-git era.
$ touch a
$ chmod -w a
$ cp a b
$ cp a b
cp: cannot create regular file 'b': Permission denied
Add comments so that you can see the reason without looking into
the history.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=a70dba8086160449cc94c5bdaff78419b6b8e3c8
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
checkdeclares: find struct declared more than once. Inspired by
checkincludes.pl.
This script checks for duplicate struct declares. Note that this will not
take into consideration macros, so you should run this only if you know
you do have real dups and do not have them under #ifdef's. You could also
just review the results.
[akpm@linux-foundation.org: fix usage message, grammar]
Link: https://lkml.kernel.org/r/20210401110943.1010796-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a few entries for recent spelling fixes found.
Opportunistically de-dupe:
exeeds||exceeds
Link: https://lore.kernel.org/lkml/31acb3239b7ab8989db0c9951e8740050aef0205.1616727528.git.tom.saeger@oracle.com/
Link: https://lore.kernel.org/lkml/fa193b3c9e346ff3fc157b54802c29b25f79c402.1615597995.git.tom.saeger@oracle.com/
Link: https://lkml.kernel.org/r/4a594a9e1536b1d9e5ba57f684c1e41457dd383b.1616861645.git.tom.saeger@oracle.com
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- Change 'option defconfig' to the environment variable
KCONFIG_DEFCONFIG_LIST
- Refactor tinyconfig without using allnoconfig_y
- Remove 'option allnoconfig_y' syntax
- Change 'option modules' to 'modules'
- Do not use /boot/config-* etc. as base config for cross-compilation
- Fix a search bug in nconf
- Various code cleanups
* tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kconfig: refactor .gitignore
kconfig: highlight xconfig 'comment' lines with '***'
kconfig: highlight gconfig 'comment' lines with '***'
kconfig: gconf: remove unused code
kconfig: remove unused PACKAGE definition
kconfig: nconf: stop endless search loops
kconfig: split menu.c out of parser.y
kconfig: nconf: refactor in print_in_middle()
kconfig: nconf: remove meaningless wattrset() call from show_menu()
kconfig: nconf: change set_config_filename() to void function
kconfig: nconf: refactor attributes setup code
kconfig: nconf: remove unneeded default for menu prompt
kconfig: nconf: get rid of (void) casts from wattrset() calls
kconfig: nconf: fix NORMAL attributes
kconfig: mconf,nconf: remove unneeded '\0' termination after snprintf()
kconfig: use /boot/config-* etc. as DEFCONFIG_LIST only for native build
kconfig: change sym_change_count to a boolean flag
kconfig: nconf: fix core dump when searching in empty menu
kconfig: lxdialog: A spello fix and a punctuation added
kconfig: streamline_config.pl: Couple of typo fixes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Evaluate $(call cc-option,...) etc. only for build targets
- Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux
- Remove unnecessary --gcc-toolchains Clang flag because the --prefix
flag finds the toolchains
- Do not pass Clang's --prefix flag when using the integrated as
- Check the assembler version in Kconfig time
- Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
some dependencies in Kconfig
- Fix invalid Module.symvers creation when building only modules
without vmlinux
- Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
set, but there is no module to build
- Refactor module installation Makefile
- Support zstd for module compression
- Convert alpha and ia64 to use generic shell scripts to generate the
syscall headers
- Add a new elfnote to indicate if the kernel was built with LTO, which
will be used by pahole
- Flatten the directory structure under include/config/ so CONFIG
options and filenames match
- Change the deb source package name from linux-$(KERNELRELEASE) to
linux-upstream
* tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits)
kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test
kbuild: deb-pkg: change the source package name to linux-upstream
tools: do not include scripts/Kbuild.include
kbuild: redo fake deps at include/config/*.h
kbuild: remove TMPO from try-run
MAINTAINERS: add pattern for dummy-tools
kbuild: add an elfnote for whether vmlinux is built with lto
ia64: syscalls: switch to generic syscallhdr.sh
ia64: syscalls: switch to generic syscalltbl.sh
alpha: syscalls: switch to generic syscallhdr.sh
alpha: syscalls: switch to generic syscalltbl.sh
sysctl: use min() helper for namecmp()
kbuild: add support for zstd compressed modules
kbuild: remove CONFIG_MODULE_COMPRESS
kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst
kbuild: move module strip/compression code into scripts/Makefile.modinst
kbuild: refactor scripts/Makefile.modinst
kbuild: rename extmod-prefix to extmod_prefix
kbuild: check module name conflict for external modules as well
kbuild: show the target directory for depmod log
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Refactor powerpc and arm64 kexec DT handling to common code. This
enables IMA on arm64.
- Add kbuild support for applying DT overlays at build time. The first
user are the DT unittests.
- Fix kerneldoc formatting and W=1 warnings in drivers/of/
- Fix handling 64-bit flag on PCI resources
- Bump dtschema version required to v2021.2.1
- Enable undocumented compatible checks for dtbs_check. This allows
tracking of missing binding schemas.
- DT docs improvements. Regroup the DT docs and add the example schema
and DT kernel ABI docs to the doc build.
- Convert Broadcom Bluetooth and video-mux bindings to schema
- Add QCom sm8250 Venus video codec binding schema
- Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
Technologies Inc.
- Cleanup of DT schema type references on common properties and
standard unit properties
* tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
powerpc: If kexec_build_elf_info() fails return immediately from elf64_load()
powerpc: Free fdt on error in elf64_load()
of: overlay: Fix kerneldoc warning in of_overlay_remove()
of: linux/of.h: fix kernel-doc warnings
of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses
dt-bindings: bcm4329-fmac: add optional brcm,ccode-map
docs: dt: update writing-schema.rst references
dt-bindings: media: venus: Add sm8250 dt schema
of: base: Fix spelling issue with function param 'prop'
docs: dt: Add DT API documentation
of: Add missing 'Return' section in kerneldoc comments
of: Fix kerneldoc output formatting
docs: dt: Group DT docs into relevant sub-sections
docs: dt: Make 'Devicetree' wording more consistent
docs: dt: writing-schema: Include the example schema in the doc build
docs: dt: writing-schema: Remove spurious indentation
dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc
dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3
dt-bindings: media: video-interfaces: Drop the example
devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt
...
|
|
Pull drm updates from Dave Airlie:
"The usual lots of work all over the place.
i915 has gotten some Alderlake work and prelim DG1 code, along with a
major locking rework over the GEM code, and brings back the property
of timing out long running jobs using a watchdog. amdgpu has some
Alderbran support (new GPU), freesync HDMI support along with a lot
other fixes.
Outside of the drm, there is a new printf specifier added which should
have all the correct acks/sobs:
- printk fourcc modifier support added %p4cc
Summary:
core:
- drm_crtc_commit_wait
- atomic plane state helpers reworked for full state
- dma-buf heaps API rework
- edid: rework and improvements for displayid
dp-mst:
- better topology logging
bridge:
- Chipone ICN6211
- Lontium LT8912B
- anx7625 regulator support
panel:
- fix lt9611 4k panels handling
simple-kms:
- add plane state helpers
ttm:
- debugfs support
- removal of unused sysfs
- ignore signaled moved fences
- ioremap buffer according to mem caching
i915:
- Alderlake S enablement
- Conversion to dma_resv_locking
- Bring back watchdog timeout support
- legacy ioctl cleanups
- add GEM TDDO and RFC process
- DG1 LMEM preparation work
- intel_display.c refactoring
- Gen9/TGL PCH combination support
- eDP MSO Support
- multiple PSR instance support
- Link training debug updates
- Disable PSR2 support on JSL/EHL
- DDR5/LPDDR5 support for bw calcs
- LSPCON limited to gen9/10 platforms
- HSW/BDW async flip/VTd corruption workaround
- SAGV watermark fixes
- SNB hard hang on ring resume fix
- Limit imported dma-buf size
- move to use new tasklet API
- refactor KBL/TGL/ADL-S display/gt steppings
- refactoring legacy DP/HDMI, FB plane code out
amdgpu:
- uapi: add ioctl to query video capabilities
- Iniital AMD Freesync HDMI support
- Initial Adebaran support
- 10bpc dithering improvements
- DCN secure display support
- Drop legacy IO BAR requirements
- PCIE/S0ix/RAS/Prime/Reset fixes
- Display ASSR support
- SMU gfx busy queues for RV/PCO
- Initial LTTPR display work
amdkfd:
- MMU notifier fixes
- APU fixes
radeon:
- debugfs cleanps
- fw error handling ifix
- Flexible array cleanups
msm:
- big DSI phy/pll cleanup
- sc7280 initial support
- commong bandwidth scaling path
- shrinker locking contention fixes
- unpin/swap support for GEM objcets
ast:
- cursor plane handling reworked
tegra:
- don't register DP AUX channels before connectors
zynqmp:
- fix OOB struct padding memset
gma500:
- drop ttm and medfield support
exynos:
- request_irq cleanup function
mediatek:
- fine tune line time for EOTp
- MT8192 dpi support
- atomic crtc config updates
- don't support HDMI connector creation
mxsdb:
- imx8mm support
panfrost:
- MMU IRQ handling rework
qxl:
- locking fixes
- resource deallocation changes
sun4i:
- add alpha properties to UI/VI layers
vc4:
- RPi4 CEC support
vmwgfx:
- doc cleanups
arc:
- moved to drm/tiny"
* tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm: (1390 commits)
drm/ttm: Don't count pages in SG BOs against pages_limit
drm/ttm: fix return value check
drm/bridge: lt8912b: fix incorrect handling of of_* return values
drm: bridge: fix LONTIUM use of mipi_dsi_() functions
drm: bridge: fix ANX7625 use of mipi_dsi_() functions
drm/amdgpu: page retire over debugfs mechanism
drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
drm/amd/display: Fix the Wunused-function warning
drm/radeon/r600: Fix variables that are not used after assignment
drm/amdgpu/smu7: fix CAC setting on TOPAZ
drm/amd/display: Update DCN302 SR Exit Latency
drm/amdgpu: enable ras eeprom on aldebaran
drm/amdgpu: RAS harvest on driver load
drm/amdgpu: add ras aldebaran ras eeprom driver
drm/amd/pm: increase time out value when sending msg to SMU
drm/amdgpu: add DMUB outbox event IRQ source define/complete/debug flag
drm/amd/pm: add the callback to get vbios bootup values for vangogh
drm/radeon: Fix size overflow
drm/amdgpu: Fix size overflow
drm/amdgpu: move mmhub ras_func init to ip specific file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 updates from Borislav Petkov:
- Turn the stack canary into a normal __percpu variable on 32-bit which
gets rid of the LAZY_GS stuff and a lot of code.
- Add an insn_decode() API which all users of the instruction decoder
should preferrably use. Its goal is to keep the details of the
instruction decoder away from its users and simplify and streamline
how one decodes insns in the kernel. Convert its users to it.
- kprobes improvements and fixes
- Set the maximum DIE per package variable on Hygon
- Rip out the dynamic NOP selection and simplify all the machinery
around selecting NOPs. Use the simplified NOPs in objtool now too.
- Add Xeon Sapphire Rapids to list of CPUs that support PPIN
- Simplify the retpolines by folding the entire thing into an
alternative now that objtool can handle alternatives with stack ops.
Then, have objtool rewrite the call to the retpoline with the
alternative which then will get patched at boot time.
- Document Intel uarch per models in intel-family.h
- Make Sub-NUMA Clustering topology the default and Cluster-on-Die the
exception on Intel.
* tag 'x86_core_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
x86, sched: Treat Intel SNC topology as default, COD as exception
x86/cpu: Comment Skylake server stepping too
x86/cpu: Resort and comment Intel models
objtool/x86: Rewrite retpoline thunk calls
objtool: Skip magical retpoline .altinstr_replacement
objtool: Cache instruction relocs
objtool: Keep track of retpoline call sites
objtool: Add elf_create_undef_symbol()
objtool: Extract elf_symbol_add()
objtool: Extract elf_strtab_concat()
objtool: Create reloc sections implicitly
objtool: Add elf_create_reloc() helper
objtool: Rework the elf_rebuild_reloc_section() logic
objtool: Fix static_call list generation
objtool: Handle per arch retpoline naming
objtool: Correctly handle retpoline thunk calls
x86/retpoline: Simplify retpolines
x86/alternatives: Optimize optimize_nops()
x86: Add insn_decode_kernel()
x86/kprobes: Move 'inline' to the beginning of the kprobe_is_ss() declaration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
|
|
The current linux-next tree has a new error:
./Documentation/gpu/drm-mm:445: ./drivers/gpu/drm/drm_prime.c:994: WARNING: Error in declarator or parameters
Invalid C declaration: Expecting "(" in parameters. [error at 17]
int __deprecated drm_prime_sg_to_page_array (struct sg_table *sgt, struct page **pages, int max_entries)
-----------------^
While we might consider that documenting a deprecated interface is not
necessarily best practice, removing the error is easy.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20210427114828.GY235567@casper.infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull documentation updates from Jonathan Corbet:
"It's been a relatively busy cycle in docsland, though more than
usually well contained to Documentation/ itself. Highlights include:
- The Chinese translators have been busy and show no signs of
stopping anytime soon. Italian has also caught up.
- Aditya Srivastava has been working on improvements to the
kernel-doc script.
- Thorsten continues his work on reporting-issues.rst and related
documentation around regression reporting.
- Lots of documentation updates, typo fixes, etc. as usual"
* tag 'docs-5.13' of git://git.lwn.net/linux: (139 commits)
docs/zh_CN: add openrisc translation to zh_CN index
docs/zh_CN: add openrisc index.rst translation
docs/zh_CN: add openrisc todo.rst translation
docs/zh_CN: add openrisc openrisc_port.rst translation
docs/zh_CN: add core api translation to zh_CN index
docs/zh_CN: add core-api index.rst translation
docs/zh_CN: add core-api irq index.rst translation
docs/zh_CN: add core-api irq irqflags-tracing.rst translation
docs/zh_CN: add core-api irq irq-domain.rst translation
docs/zh_CN: add core-api irq irq-affinity.rst translation
docs/zh_CN: add core-api irq concepts.rst translation
docs: sphinx-pre-install: don't barf on beta Sphinx releases
scripts: kernel-doc: improve parsing for kernel-doc comments syntax
docs/zh_CN: two minor fixes in zh_CN/doc-guide/
Documentation: dev-tools: Add Testing Overview
docs/zh_CN: add translations in zh_CN/dev-tools/gcov
docs: reporting-issues: make people CC the regressions list
MAINTAINERS: add regressions mailing list
doc:it_IT: align Italian documentation
docs/zh_CN: sync reporting-issues.rst
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of various smaller driver subsystem updates for
5.13-rc1.
Major bits in here are:
- habanalabs driver updates
- hwtracing driver updates
- interconnect driver updates
- mhi driver updates
- extcon driver updates
- fpga driver updates
- new binder features added
- nvmem driver updates
- phy driver updates
- soundwire driver updates
- smaller misc and char driver fixes and updates.
- bluetooth driver bugfix that maintainer wanted to go through this
tree.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
bluetooth: eliminate the potential race condition when removing the HCI controller
coresight: etm-perf: Fix define build issue when built as module
phy: Revert "phy: ti: j721e-wiz: add missing of_node_put"
phy: ti: j721e-wiz: Add missing include linux/slab.h
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
stm class: Use correct UUID APIs
intel_th: pci: Add Alder Lake-M support
intel_th: pci: Add Rocket Lake CPU support
intel_th: Consistency and off-by-one fix
intel_th: Constify attribute_group structs
intel_th: Constify all drvdata references
stm class: Remove an unused function
habanalabs/gaudi: Fix uninitialized return code rc when read size is zero
greybus: es2: fix kernel-doc warnings
mei: me: add Alder Lake P device id.
dw-xdata-pcie: Update outdated info and improve text format
dw-xdata-pcie: Fix documentation build warns
fbdev: zero-fill colormap in fbcmap.c
firmware: qcom-scm: Fix QCOM_SCM configuration
speakup: i18n: Switch to kmemdup_nul() in spk_msg_set()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull x509 dbx/mokx UEFI support from David Howells:
"Here's a set of patches from Eric Snowberg[1] that add support for
EFI_CERT_X509_GUID entries in the dbx and mokx UEFI tables (such
entries cause matching certificates to be rejected).
These are currently ignored and only the hash entries are made use of.
Additionally Eric included his patches to allow such certificates to
be preloaded.
These patches deal with CVE-2020-26541.
To quote Eric:
'This is the fifth patch series for adding support for
EFI_CERT_X509_GUID entries [2]. It has been expanded to not only
include dbx entries but also entries in the mokx. Additionally
my series to preload these certificate [3] has also been
included'"
Link: https://lore.kernel.org/r/20210122181054.32635-1-eric.snowberg@oracle.com [1]
Link: https://patchwork.kernel.org/project/linux-security-module/patch/20200916004927.64276-1-eric.snowberg@oracle.com/ [2]
Link: https://lore.kernel.org/patchwork/cover/1315485/ [3]
* tag 'keys-cve-2020-26541-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
integrity: Load mokx variables into the blacklist keyring
certs: Add ability to preload revocation certs
certs: Move load_system_certificate_list to a common function
certs: Add EFI_CERT_X509_GUID support for dbx entries
|
|
Prior to clang 13.0.0, the RISC-V name for the mcount symbol was
"mcount", which differs from the GCC version of "_mcount", which results
in the following errors:
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_level':
main.c:(.text+0xe): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_start':
main.c:(.text+0x4e): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_finish':
main.c:(.text+0x92): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `.LBB32_28':
main.c:(.text+0x30c): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `free_initmem':
main.c:(.text+0x54c): undefined reference to `mcount'
This has been corrected in https://reviews.llvm.org/D98881 but the
minimum supported clang version is 10.0.1. To avoid build errors and to
gain a working function tracer, adjust the name of the mcount symbol for
older versions of clang in mount.S and recordmcount.pl.
Link: https://github.com/ClangBuiltLinux/linux/issues/1331
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Clang can generate R_RISCV_CALL_PLT relocations to _mcount:
$ llvm-objdump -dr build/riscv/init/main.o | rg mcount
000000000000000e: R_RISCV_CALL_PLT _mcount
000000000000004e: R_RISCV_CALL_PLT _mcount
After this, the __start_mcount_loc section is properly generated and
function tracing still works.
Link: https://github.com/ClangBuiltLinux/linux/issues/1331
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 69 non-merge commits during the last 22 day(s) which contain
a total of 69 files changed, 3141 insertions(+), 866 deletions(-).
The main changes are:
1) Add BPF static linker support for extern resolution of global, from Andrii.
2) Refine retval for bpf_get_task_stack helper, from Dave.
3) Add a bpf_snprintf helper, from Florent.
4) A bunch of miscellaneous improvements from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add '/' prefix to clarify that the generated files exist right under
scripts/kconfig/, but not in any sub-directory.
Replace '*conf-cfg' with '[gmnq]conf-cfg' to make it explicit, and
still short enough.
Use '[gmnq]conf' to combine gconf, mconf, nconf, and qconf.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Change the source package name from 'linux-$(KERNELRELEASE)' to
'linux-upstream'.
Initially, I tried to use 'linux' to be aligned with the Debian
kernel package, but Ben suggested 'linux-upstream' so that it is
clearly distinguished from distribution packages. [1]
The filenames will be changed as follows:
[Before]
linux-5.12.0-rc3+_5.12.0-rc3+-1.dsc
linux-5.12.0-rc3+_5.12.0-rc3+.orig.tar.gz
linux-5.12.0-rc3+_5.12.0-rc3+-1.diff.gz
[After]
linux-upstream_5.12.0-rc3+-1.dsc
linux-upstream_5.12.0-rc3+.orig.tar.gz
linux-upstream_5.12.0-rc3+-1.diff.gz
Commit 3716001bcb7f ("deb-pkg: add source package") introduced
KDEB_SOURCENAME. If you are unhappy with the default name, you can
override it via KDEB_SOURCENAME.
[1]: https://lore.kernel.org/linux-kbuild/06ffa2a690d57f867b4bc1b42f0026917b1dd3cd.camel@decadent.org.uk/T/#m2c4afa0eca5ced5e57795b002f2dbcb05d7a4a44
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Make include/config/foo/bar.h fake deps files generation simpler.
* delete .h suffix
those aren't header files, shorten filenames,
* delete tolower()
Linux filesystems can deal with both upper and lowercase
filenames very well,
* put everything in 1 directory
Presumably 'mkdir -p' split is from dark times when filesystems
handled huge directories badly, disks were round adding to
seek times.
x86_64 allmodconfig lists 12364 files in include/config.
../obj/include/config/
├── 104_QUAD_8
├── 60XX_WDT
├── 64BIT
...
├── ZSWAP_DEFAULT_ON
├── ZSWAP_ZPOOL_DEFAULT
└── ZSWAP_ZPOOL_DEFAULT_ZBUD
0 directories, 12364 files
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
TMPO is only used by arch/x86/Makefile.
Change arch/x86/Makefile to use $$TMPO.o and remove TMPO from
scripts/Makefile.compiler.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently, clang LTO built vmlinux won't work with pahole.
LTO introduced cross-cu dwarf tag references and broke
current pahole model which handles one cu as a time.
The solution is to merge all cu's as one pahole cu as in [1].
We would like to do this merging only if cross-cu dwarf
references happens. The LTO build mode is a pretty good
indication for that.
In earlier version of this patch ([2]), clang flag
-grecord-gcc-switches is proposed to add to compilation flags
so pahole could detect "-flto" and then merging cu's.
This will increate the binary size of 1% without LTO though.
Arnaldo suggested to use a note to indicate the vmlinux
is built with LTO. Such a cheap way to get whether the vmlinux
is built with LTO or not helps pahole but is also useful
for tracing as LTO may inline/delete/demote global functions,
promote static functions, etc.
So this patch added an elfnote with a new type LINUX_ELFNOTE_LTO_INFO.
The owner of the note is "Linux".
With gcc 8.4.1 and clang trunk, without LTO, I got
$ readelf -n vmlinux
Displaying notes found in: .notes
Owner Data size Description
...
Linux 0x00000004 func
description data: 00 00 00 00
...
With "readelf -x ".notes" vmlinux", I can verify the above "func"
with type code 0x101.
With clang thin-LTO, I got the same as above except the following:
description data: 01 00 00 00
which indicates the vmlinux is built with LTO.
[1] https://lore.kernel.org/bpf/20210325065316.3121287-1-yhs@fb.com/
[2] https://lore.kernel.org/bpf/20210331001623.2778934-1-yhs@fb.com/
Suggested-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc4 (x86-64)
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
kmod 28 supports modules compressed in zstd format so let's add this
possibility to kernel.
Signed-off-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
scripts/Makefile.modsign is a subset of scripts/Makefile.modinst,
and duplicates the code. Let's merge them.
By the way, you do not need to run 'make modules_sign' explicitly
because modules are signed as a part of 'make modules_install' when
CONFIG_MODULE_SIG_ALL=y. If CONFIG_MODULE_SIG_ALL=n, mod_sign_cmd is
set to 'true', so 'make modules_sign' is not functional.
In my understanding, the reason of still keeping this is to handle
corner cases like commit 64178cb62c32 ("builddeb: fix stripped module
signatures if CONFIG_DEBUG_INFO and CONFIG_MODULE_SIG_ALL are set").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Both mod_strip_cmd and mod_compress_cmd are only used in
scripts/Makefile.modinst, hence there is no good reason to define them
in the top Makefile. Move the relevant code to scripts/Makefile.modinst.
Also, show separate log messages for each of install, strip, sign, and
compress.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
