| Age | Commit message (Collapse) | Author |
|---|
|
Currently, the asan-stack parameter is only passed along if
CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
be defined in Kconfig so that the value can be checked. In RISC-V's
case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
is disabled, resulting in large stack warnings with allmodconfig:
drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12: error: stack frame size (14400) exceeds limit (2048) in function 'lb035q02_connect' [-Werror,-Wframe-larger-than]
static int lb035q02_connect(struct omap_dss_device *dssdev)
^
1 error generated.
Ensure that the value of CONFIG_KASAN_STACK is always passed along to
the compiler so that these warnings do not happen when
CONFIG_KASAN_STACK is disabled.
Link: https://github.com/ClangBuiltLinux/linux/issues/1453
References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier")
Link: https://lkml.kernel.org/r/20210922205525.570068-1-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix the following build failure reported in [1] by adding a conditional
definition of EM_RISCV in order to allow cross-compilation on machines
which do not have EM_RISCV definition in their host.
scripts/sorttable.c:352:7: error: use of undeclared identifier 'EM_RISCV'
EM_RISCV was added to <elf.h> in glibc 2.24 so builds on systems with
glibc headers < 2.24 should show this error.
[mkubecek@suse.cz: changelog addition]
Link: https://lore.kernel.org/lkml/e8965b25-f15b-c7b4-748c-d207dda9c8e8@i2se.com/ [1]
Link: https://lkml.kernel.org/r/20210913030625.4525-1-miles.chen@mediatek.com
Fixes: 54fed35fd393 ("riscv: Enable BUILDTIME_TABLE_SORT")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Cc: Michal Kubecek <mkubecek@suse.cz>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix bugs in checkkconfigsymbols.py
- Fix missing sys import in gen_compile_commands.py
- Fix missing FORCE warning for ARCH=sh builds
- Fix -Wignored-optimization-argument warnings for Clang builds
- Turn -Wignored-optimization-argument into an error in order to stop
building instead of sprinkling warnings
* tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS
x86/build: Do not add -falign flags unconditionally for clang
kbuild: Fix comment typo in scripts/Makefile.modpost
sh: Add missing FORCE prerequisites in Makefile
gen_compile_commands: fix missing 'sys' package
checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file
checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit
|
|
Similar to commit 589834b3a009 ("kbuild: Add
-Werror=unknown-warning-option to CLANG_FLAGS").
Clang ignores certain GCC flags that it has not implemented, only
emitting a warning:
$ echo | clang -fsyntax-only -falign-jumps -x c -
clang-14: warning: optimization flag '-falign-jumps' is not supported
[-Wignored-optimization-argument]
When one of these flags gets added to KBUILD_CFLAGS unconditionally, all
subsequent cc-{disable-warning,option} calls fail because -Werror was
added to these invocations to turn the above warning and the equivalent
-W flag warning into errors.
To catch the presence of these flags earlier, turn
-Wignored-optimization-argument into an error so that the flags can
either be implemented or ignored via cc-option and there are no more
weird errors.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Change comment "create one <module>.mod.c file pr. module"
to "create one <module>.mod.c file per module"
Signed-off-by: Ramji Jiyani <ramjiyani@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
We need to import the 'sys' package since the script has called
sys.exit() method.
Fixes: 6ad7cbc01527 ("Makefile: Add clang-tidy and static analyzer support to makefile")
Signed-off-by: Kortan <kortanzh@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When parsing Kconfig files to find symbol definitions and references,
lines after a 'help' line are skipped until a new config definition
starts.
However, Kconfig statements can actually be after a help section, as
long as these have shallower indentation. These are skipped by the
parser.
This means that symbols referenced in this kind of statements are
ignored by this function and thus are not considered undefined
references in case the symbol is not defined.
Remove the 'skip' logic entirely, as it is not needed if we just use the
STMT regex to find the end of help lines.
However, this means that keywords that appear as part of the help
message (i.e. with the same indentation as the help lines) it will be
considered as a reference/definition. This can happen now as well, but
only with REGEX_KCONFIG_DEF lines. Also, the keyword must have a SYMBOL
after it, which probably means that someone referenced a config in the
help so it seems like a bonus :)
The real solution is to keep track of the indentation when a the first
help line in encountered and then handle DEF and STMT lines only if the
indentation is shallower.
Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
As opposed to the --diff option, --commit can get ref names instead of
commit hashes.
When using the --commit option, the script resets the working directory
to the commit before the given ref, by adding '~' to the end of the ref.
However, the 'HEAD' ref is relative, and so when the working directory
is reset to 'HEAD~', 'HEAD' points to what was 'HEAD~'. Then when the
script resets to 'HEAD' it actually stays in the same commit. In this
case, the script won't report any cases because there is no diff between
the cases of the two refs.
Prevent the user from using HEAD refs.
A better solution might be to resolve the refs before doing the
reset, but for now just disallow such refs.
Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Merge patch series from Nick Desaulniers to update the minimum gcc
version to 5.1.
This is some of the left-overs from the merge window that I didn't want
to deal with yesterday, so it comes in after -rc1 but was sent before.
Gcc-4.9 support has been an annoyance for some time, and with -Werror I
had the choice of applying a fairly big patch from Kees Cook to remove a
fair number of initializer warnings (still leaving some), or this patch
series from Nick that just removes the source of the problem.
The initializer cleanups might still be worth it regardless, but
honestly, I preferred just tackling the problem with gcc-4.9 head-on.
We've been more aggressiuve about no longer having to care about
compilers that were released a long time ago, and I think it's been a
good thing.
I added a couple of patches on top to sort out a few left-overs now that
we no longer support gcc-4.x.
As noted by Arnd, as a result of this minimum compiler version upgrade
we can probably change our use of '--std=gnu89' to '--std=gnu11', and
finally start using local loop declarations etc. But this series does
_not_ yet do that.
Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/
Link: https://lore.kernel.org/lkml/CAK7LNASs6dvU6D3jL2GG3jW58fXfaj6VNOe55NJnTB8UPuk2pA@mail.gmail.com/
Link: https://github.com/ClangBuiltLinux/linux/issues/1438
* emailed patches from Nick Desaulniers <ndesaulniers@google.com>:
Drop some straggling mentions of gcc-4.9 as being stale
compiler_attributes.h: drop __has_attribute() support for gcc4
vmlinux.lds.h: remove old check for GCC 4.9
compiler-gcc.h: drop checks for older GCC versions
Makefile: drop GCC < 5 -fno-var-tracking-assignments workaround
arm64: remove GCC version check for ARCH_SUPPORTS_INT128
powerpc: remove GCC version check for UPD_CONSTR
riscv: remove Kconfig check for GCC version for ARCH_RV64I
Kconfig.debug: drop GCC 5+ version check for DWARF5
mm/ksm: remove old GCC 4.9+ check
compiler.h: drop fallback overflow checkers
Documentation: raise minimum supported version of GCC to 5.1
|
|
commit fad7cd3310db ("nbd: add the check to prevent overflow in
__nbd_ioctl()") raised an issue from the fallback helpers added in
commit f0907827a8a9 ("compiler.h: enable builtin overflow checkers and
add fallback code")
Specifically, the helpers for checking whether the results of a
multiplication overflowed (__unsigned_mul_overflow,
__signed_add_overflow) use the division operator when
!COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW. This is problematic for 64b
operands on 32b hosts.
Also, because the macro is type agnostic, it is very difficult to write
a similarly type generic macro that dispatches to one of:
* div64_s64
* div64_u64
* div_s64
* div_u64
Raising the minimum supported versions allows us to remove all of the
fallback helpers for !COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW, instead
dispatching the compiler builtins.
arm64 has already raised the minimum supported GCC version to 5.1, do
this for all targets now. See the link below for the previous
discussion.
Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/
Link: https://lore.kernel.org/lkml/CAK7LNASs6dvU6D3jL2GG3jW58fXfaj6VNOe55NJnTB8UPuk2pA@mail.gmail.com/
Link: https://github.com/ClangBuiltLinux/linux/issues/1438
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- A pair of defconfig additions, for NVMe and the EFI filesystem
localization options.
- A larger address space for stack randomization.
- A cleanup to our install rules.
- A DTS update for the Microchip Icicle board, to fix the serial
console.
- Support for build-time table sorting, which allows us to have
__ex_table read-only.
* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Move EXCEPTION_TABLE to RO_DATA segment
riscv: Enable BUILDTIME_TABLE_SORT
riscv: dts: microchip: mpfs-icicle: Fix serial console
riscv: move the (z)install rules to arch/riscv/Makefile
riscv: Improve stack randomisation on RV64
riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
riscv: defconfig: enable BLK_DEV_NVME
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"These changes update some existing semantic patches with
respect to some recent changes in the kernel.
Specifically, the change to kvmalloc.cocci searches for
kfree_sensitive rather than kzfree, and the change to
use_after_iter.cocci adds list_entry_is_head as a valid
use of a list iterator index variable after the end of
the loop"
* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccinelle: allow list_entry_is_head() to use pos
coccinelle: api: rename kzfree to kfree_sensitive
|
|
Enable BUILDTIME_TABLE_SORT to sort the exception table at build time
rather than during boot.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"The only main change I have for this round of updates is the modules
MAINTAINERS update.
As I find myself with less time to devote to upstream these days, Luis
has kindly agreed to help maintain the module loader, to eventually
transition to being the primary maintainer. Since Luis is already very
involved upstream with experience maintaining various areas of the
kernel including the kmod usermode helper, I think he is a great fit
for this area of the kernel.
Summary:
- Add Luis Chamberlain as modules maintainer
- Fix for .ctors sections in module linker script"
* tag 'modules-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
MAINTAINERS: Add Luis Chamberlain as modules maintainer
module: combine constructors in module linker script
|
|
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
|
|
Fix typo ("and" should be "an") in an error message.
Link: https://lkml.kernel.org/r/20210727002943.29774-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The preferred git commit id reference has the form
commit <SHA-1> ("Title line")
where SHA-1 is the commit hex hash with a minimum lenth of 12 and ("Title
line") is the complete title line of the commit with a (" prefix and ")
suffix.
The current tests fail when the "Title line" has one or more embedded
double quotes.
Improve the test that finds the commit SHA-1 hex hash then ("Title line")
by using $balanced_parens for a maximum of 3 consecutive lines.
[akpm@linux-foundation.org: add missing &&]
Link: https://lkml.kernel.org/r/976c6cdd680db4b55ae31b5fc2d1779da5c0dc66.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Denis Efremov <efremov@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Instead of checkpatch requiring the patch author to exactly match the
signed-off-by tag, commit 48ca2d8ac8a1 ("checkpatch: add new warnings to
author signoff checks.") safely relaxed this requirement.
Although the local-part of an email address (local-part@domain), may be
case sensitive, exploiting the case sensitivity of mailbox local-parts
impedes interoperability and is discouraged. Mailbox domains follow
normal DNS rules and are hence not case sensitive. (Refer to
https://datatracker.ietf.org/doc/html/rfc5321#section-2.4.)
Further relax the patch author and signed-off-by tag comparison by making
the email address check case insensitive.
Link: https://lkml.kernel.org/r/20210816112725.173206-1-zohar@linux.ibm.com
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Allow prefixing typical strings with L for wide strings and u for unicode
strings.
Link: https://lkml.kernel.org/r/20210801170733.1.I3f9784fd3c1007d08ec2e70b151d137687575495@changeid
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and
later re-added, are given a CPU number on the same node as
previously, when possible.
- Add support for a new more flexible device-tree format for specifying
NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.
* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
powerpc/bug: Cast to unsigned long before passing to inline asm
powerpc/ptdump: Fix generic ptdump for 64-bit
KVM: PPC: Fix clearing never mapped TCEs in realmode
powerpc/pseries/iommu: Rename "direct window" to "dma window"
powerpc/pseries/iommu: Make use of DDW for indirect mapping
powerpc/pseries/iommu: Find existing DDW with given property name
powerpc/pseries/iommu: Update remove_dma_window() to accept property name
powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
powerpc/pseries/iommu: Allow DDW windows starting at 0x00
powerpc/pseries/iommu: Add ddw_list_new_entry() helper
powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
powerpc/kernel/iommu: Add new iommu_table_in_use() helper
powerpc/pseries/iommu: Replace hard-coded page shift
powerpc/numa: Update cpu_cpu_map on CPU online/offline
powerpc/numa: Print debug statements only when required
powerpc/numa: convert printk to pr_xxx
powerpc/numa: Drop dbg in favour of pr_debug
powerpc/smp: Enable CACHE domain for shared processor
powerpc/smp: Update cpu_core_map on all PowerPc systems
...
|
|
Commit 0e0345b77ac4 ("kbuild: redo fake deps at include/config/*.h")
simplified the Kconfig/fixdep interaction a lot.
For CONFIG_FOO_BAR_BAZ, Kconfig now touches include/config/FOO_BAR_BAZ
instead of the previous include/config/foo/bar/baz.h .
This commit simplifies the TRIM_UNUSED_KSYMS feature in a similar way:
- delete .h suffix
- delete tolower()
- put everything in 1 directory
For EXPORT_SYMBOL(FOO_BAR_BAZ), scripts/adjust_autoksyms.sh now touches
include/ksym/FOO_BAR_BAZ instead of include/ksym/foo/bar/baz.h .
This is more precise, avoiding possibly unnecessary rebuilds.
EXPORT_SYMBOL(FOO_BAR_BAZ)
EXPORT_SYMBOL(_FOO_BAR_BAZ)
EXPORT_SYMBOL(__FOO_BAR_BAZ)
were previously mapped to the same header, include/ksym/foo/bar/baz.h
but now are handled separately.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The code:
$(if $(or $(CONFIG_GCOV_KERNEL),$(CONFIG_LTO_CLANG)), ...)
... can be simpled to:
$(if $(CONFIG_GCOV_KERNEL)$(CONFIG_LTO_CLANG), ...)
Also, remove meaningless commas at the end of $(if ...).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
get_src_version() strips 'o' or 'lto.o' from the end of the object file
path (so, postfixlen is 1 or 5), then adds 'mod'.
If you look at the code closely, mod->name already holds the base path
with the extension stripped.
Most of the code changes made by commit 7ac204b545f2 ("modpost: lto:
strip .lto from module names") was actually unneeded.
sumversion.c does not need strends(), so it can get back local in
modpost.c again.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
It seems like the implementation of the --ignore option is broken.
In check_symbols_helper, when going through the list of files, a file is
added to the list of source files to check if it matches the ignore
pattern. Instead, as stated in the comment below this condition, the
file should be added if it doesn't match the pattern.
This means that when providing an ignore pattern, the only files that
will be checked will be the ones we want the ignore, in addition to the
Kconfig files that don't match the pattern (the check in
parse_kconfig_files is done right)
Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
For ARCH=um, ${CC} is used as the linker driver. Hence, the linker
options are prefixed with -Wl, .
Merge the similar code.
I replaced the -T option with the long option --script= so that it
works well with/without ${wl}.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
arch/um/Makefile passes the -f option to the ln command:
linux: vmlinux
@echo ' LINK $@'
$(Q)ln -f $< $@
So, the hard link is always re-created, and the old one is removed
anyway.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
When Clang LTO is enabled, vmlinux_link() reuses vmlinux.o instead of
re-linking ${KBUILD_VMLINUX_OBJS} and ${KBUILD_VMLINUX_LIBS}.
That is the only difference here, so merge the similar code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
cmd_update_lto_symversions merges all the existing *.symversions, but
some of them might be stale.
If the last EXPORT_SYMBOL is removed from a C file, the *.symversions
file is not deleted or updated. It contains stale CRCs, but still they
will be used for linking the vmlinux or modules.
It is not a big deal when the EXPORT_SYMBOL is really removed. However,
when the EXPORT_SYMBOL is moved to another file, the same __crc_<symbol>
will appear twice in the merged *.symversions, possibly with different
CRCs if the function argument is changed at the same time. It would
confuse module versioning.
If no EXPORT_SYMBOL is found, let's remove *.symversions explicitly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
This is not used anywhere because the short log is displayed when
it is used through a $(call cmd,...) invocation.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
The current gen_compile_commands.py assumes that objects are always
built by a single command.
It makes sense to support cases where objects are built by a series of
commands:
cmd_<object> := <command1> ; <command2>
One use-case is that <command1> is a compiler command, and <command2>
an objtool command.
It allows *.cmd files to contain an objtool command so that any change
in it triggers object rebuilds.
If ; appears after the C source file, take the first command.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
When CONFIG_TRIM_UNUSED_KSYMS is enabled, I see some warnings like this:
nm: arch/x86/entry/vdso/vdso32/note.o: no symbols
$NM (both GNU nm and llvm-nm) warns when no symbol is found in the
object. Suppress the stderr.
Fangrui Song mentioned binutils>=2.37 `nm -q` can be used to suppress
"no symbols" [1], and llvm-nm>=13.0.0 supports -q as well.
We cannot use it for now, but note it as a TODO.
[1]: https://sourceware.org/bugzilla/show_bug.cgi?id=27408
Fixes: bbda5ec671d3 ("kbuild: simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
It has been brought up a few times in various code reviews that clang
3.5 introduced -f{,no-}integrated-as as the preferred way to enable and
disable the integrated assembler, mentioning that -{no-,}integrated-as
are now considered legacy flags.
Switch the kernel over to using those variants in case there is ever a
time where clang decides to remove the non-'f' variants of the flag.
Also, fix a typo in a comment ("intergrated" -> "integrated").
Link: https://releases.llvm.org/3.5.0/tools/clang/docs/ReleaseNotes.html#new-compiler-flags
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
if_changed, if_changed_dep, and if_changed_rule must have FORCE as a
prerequisite so the command line change is detected.
Documentation/kbuild/makefiles.rst clearly explains it:
Note: It is a typical mistake to forget the FORCE prerequisite.
However, not all people follow the document.
This mistake occurred again and again, so a compelling force is needed.
Show a warning if FORCE is missing in the prerequisite of if_changed
and friends. Same for filechk.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <n.schier@avm.de>
|
|
Add a new macro that expands into $(newer-prereqs)$(cmd-check).
It makes it easier to add common code for if_changed, if_changed_dep,
and if_changed_rule.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
With CONFIG_LTO_CLANG, we currently link modules into native
code just before modpost, which means with TRIM_UNUSED_KSYMS
enabled, we still look at the LLVM bitcode in the .o files when
generating the list of used symbols. As the bitcode doesn't
yet have calls to compiler intrinsics and llvm-nm doesn't see
function references that only exist in function-level inline
assembly, we currently need a whitelist for TRIM_UNUSED_KSYMS to
work with LTO.
This change moves module LTO linking to happen earlier, and
thus avoids the issue with LLVM bitcode and TRIM_UNUSED_KSYMS
entirely, allowing us to also drop the whitelist from
gen_autoksyms.sh.
Link: https://github.com/ClangBuiltLinux/linux/issues/1369
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Tested-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Pull VFIO updates from Alex Williamson:
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
support future vendor provided vfio-pci variants (Yishai Hadas, Max
Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first open,
last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
vfio/pci: Introduce vfio_pci_core.ko
vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
vfio: Use select for eventfd
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
PCI: Add 'override_only' field to struct pci_device_id
vfio/pci: Move module parameters to vfio_pci.c
vfio/pci: Move igd initialization to vfio_pci.c
vfio/pci: Split the pci_driver code out of vfio_pci_core.c
vfio/pci: Include vfio header in vfio_pci_core.h
vfio/pci: Rename ops functions to fit core namings
vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
vfio/ap_ops: Convert to use vfio_register_group_dev()
s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
s390/vfio-ap: r/w lock for PQAP interception handler function pointer
vfio/type1: Fix vfio_find_dma_valid return
vfio-pci/zdev: Remove repeated verbose license text
vfio: platform: reset: Convert to SPDX identifier
vfio: Remove struct vfio_device_ops open/release
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- Fix a kernel crash when a signal is delivered to bad userspace stack
- Fix fall-through warnings in math-emu code
- Increase size of gcc stack frame check
- Switch coding from 'pci_' to 'dma_' API
- Make struct parisc_driver::remove() return void
- Some parisc related Makefile changes
- Minor cleanups, e.g. change to octal permissions, fix macro
collisions, fix PMD_ORDER collision, replace spaces with tabs
* tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: math-emu: Fix fall-through warnings
parisc: fix crash with signals and alloca
parisc: Fix compile failure when building 64-bit kernel natively
parisc: ccio-dma.c: Added tab instead of spaces
parisc/parport_gsc: switch from 'pci_' to 'dma_' API
parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild
parisc: switch from 'pci_' to 'dma_' API
parisc: Make struct parisc_driver::remove() return void
parisc: remove unused arch/parisc/boot/install.sh and its phony target
parisc: Rename PMD_ORDER to PMD_TABLE_ORDER
parisc: math-emu: Avoid "fmt" macro collision
parisc: Increase size of gcc stack frame check
parisc: Replace symbolic permissions with octal permissions
|
|
Pull documentation updates from Jonathan Corbet:
"Yet another set of documentation changes:
- A reworking of PDF generation to yield better results for documents
using CJK fonts in particular.
- A new set of translations into traditional Chinese, a dialect for
which I am assured there is a community of interested readers.
- A lot more regular Chinese translation work as well.
... plus the usual assortment of updates, fixes, typo tweaks, etc"
* tag 'docs-5.15' of git://git.lwn.net/linux: (55 commits)
docs: sphinx-requirements: Move sphinx_rtd_theme to top
docs: pdfdocs: Enable language-specific font choice of zh_TW translations
docs: pdfdocs: Teach xeCJK about character classes of quotation marks
docs: pdfdocs: Permit AutoFakeSlant for CJK fonts
docs: pdfdocs: One-half spacing for CJK translations
docs: pdfdocs: Add conf.py local to translations for ascii-art alignment
docs: pdfdocs: Preserve inter-phrase space in Korean translations
docs: pdfdocs: Choose Serif font as CJK mainfont if possible
docs: pdfdocs: Add CJK-language-specific font settings
docs: pdfdocs: Refactor config for CJK document
scripts/kernel-doc: Override -Werror from KCFLAGS with KDOC_WERROR
docs/zh_CN: Add zh_CN/accounting/psi.rst
doc: align Italian translation
Documentation/features/vm: riscv supports THP now
docs/zh_CN: add infiniband user_verbs translation
docs/zh_CN: add infiniband user_mad translation
docs/zh_CN: add infiniband tag_matching translation
docs/zh_CN: add infiniband sysfs translation
docs/zh_CN: add infiniband opa_vnic translation
docs/zh_CN: add infiniband ipoib translation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Refactor arch kdump DT related code to a common implementation
- Add fw_devlink tracking for 'phy-handle', 'leds', 'backlight',
'resets', and 'pwm' properties
- Various clean-ups to DT FDT code
- Fix a runtime error for !CONFIG_SYSFS
- Convert Synopsys DW PCI and derivative binding docs to schemas. Add
Toshiba Visconti PCIe binding.
- Convert a bunch of memory controller bindings to schemas
- Covert eeprom-93xx46, Samsung Exynos TRNG, Samsung Exynos IRQ
combiner, arm-charlcd, img-ascii-lcd, UniPhier eFuse, Xilinx Zynq
MPSoC FPGA, Xilinx Zynq MPSoC reset, Mediatek mmsys, Gemini boards,
brcm,iproc-i2c, faraday,ftpci100, and ks8851 net to DT schema.
- Extend nvmem bindings to handle bit offsets in unit-addresses
- Add DT schemas for HiKey 970 PCIe PHY
- Remove unused ZTE, energymicro,efm32-timer, and Exynos SATA bindings
- Enable dtc pci_device_reg warning by default
- Fixes for handling 'unevaluatedProperties' in preparation to enable
pending support in the tooling for jsonschema 2020-12 draft
* tag 'devicetree-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
dt-bindings: display: remove zte,vou.txt binding doc
dt-bindings: hwmon: merge max1619 into trivial devices
dt-bindings: mtd-physmap: Add 'arm,vexpress-flash' compatible
dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema
dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries
dt-bindings: Add vendor prefix for Topic Embedded Systems
of: fdt: Rename reserve_elfcorehdr() to fdt_reserve_elfcorehdr()
arm64: kdump: Remove custom linux,usable-memory-range handling
arm64: kdump: Remove custom linux,elfcorehdr handling
riscv: Remove non-standard linux,elfcorehdr handling
of: fdt: Use IS_ENABLED(CONFIG_BLK_DEV_INITRD) instead of #ifdef
of: fdt: Add generic support for handling usable memory range property
of: fdt: Add generic support for handling elf core headers property
crash_dump: Make elfcorehdr address/size symbols always visible
dt-bindings: memory: convert Samsung Exynos DMC to dtschema
dt-bindings: devfreq: event: convert Samsung Exynos PPMU to dtschema
dt-bindings: devfreq: event: convert Samsung Exynos NoCP to dtschema
kbuild: Enable dtc 'pci_device_reg' warning by default
dt-bindings: soc: remove obsolete zte zx header
dt-bindings: clock: remove obsolete zte zx header
...
|
|
Commit 23243c1ace9f ("arch: use cross_compiling to check whether it is
a cross build or not") broke 64-bit parisc builds on 32-bit parisc
systems.
Helge mentioned:
- 64-bit parisc userspace is not supported yet [1]
- hppa gcc does not support "-m64" flag [2]
That means, parisc developers working on a 32-bit parisc machine need
to use hppa64-linux-gnu-gcc (cross compiler) for building the 64-bit
parisc kernel.
After the offending commit, gcc is used in such a case because
both $(SRCARCH) and $(SUBARCH) are 'parisc', hence cross_compiling is
unset.
A correct way is to introduce ARCH=parisc64 because building the 64-bit
parisc kernel on a 32-bit parisc system is not exactly a native build,
but rather a semi-cross build.
[1]: https://lore.kernel.org/linux-parisc/5dfd81eb-c8ca-b7f5-e80e-8632767c022d@gmx.de/#t
[2]: https://lore.kernel.org/linux-parisc/89515325-fc21-31da-d238-6f7a9abbf9a0@gmx.de/
Fixes: 23243c1ace9f ("arch: use cross_compiling to check whether it is a cross build or not")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
|
|
Expose an 'override_only' helper macro (i.e.
PCI_DRIVER_OVERRIDE_DEVICE_VFIO) for VFIO PCI sub system and add the
required code to prefix its matching entries with "vfio_" in
modules.alias file.
It allows VFIO device drivers to include match entries in the
modules.alias file produced by kbuild that are not used for normal
driver autoprobing and module autoloading. Drivers using these match
entries can be connected to the PCI device manually, by userspace, using
the existing driver_override sysfs.
For example the resulting modules.alias may have:
alias pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_core
alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci
alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci
In this example mlx5_core and mlx5_vfio_pci match to the same PCI
device. The kernel will autoload and autobind to mlx5_core but the
kernel and udev mechanisms will ignore mlx5_vfio_pci.
When userspace wants to change a device to the VFIO subsystem it can
implement a generic algorithm:
1) Identify the sysfs path to the device:
/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0
2) Get the modalias string from the kernel:
$ cat /sys/bus/pci/devices/0000:01:00.0/modalias
pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00
3) Prefix it with vfio_:
vfio_pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00
4) Search modules.alias for the above string and select the entry that
has the fewest *'s:
alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci
5) modprobe the matched module name:
$ modprobe mlx5_vfio_pci
6) cat the matched module name to driver_override:
echo mlx5_vfio_pci > /sys/bus/pci/devices/0000:01:00.0/driver_override
7) unbind device from original module
echo 0000:01:00.0 > /sys/bus/pci/devices/0000:01:00.0/driver/unbind
8) probe PCI drivers (or explicitly bind to mlx5_vfio_pci)
echo 0000:01:00.0 > /sys/bus/pci/drivers_probe
The algorithm is independent of bus type. In future the other buses with
VFIO device drivers, like platform and ACPI, can use this algorithm as
well.
This patch is the infrastructure to provide the information in the
modules.alias to userspace. Convert the only VFIO pci_driver which results
in one new line in the modules.alias:
alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci
Later series introduce additional HW specific VFIO PCI drivers, such as
mlx5_vfio_pci.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # for pci.h
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-11-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
There's only a couple of instances of the 'pci_device_reg' warnings left
and they look legit, so let's enable the warning by default.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: soc@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210820165011.3257112-1-robh@kernel.org/
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using asm goto in __WARN_FLAGS() and WARN_ON() allows more
flexibility to GCC.
For that add an entry to the exception table so that
program_check_exception() knowns where to resume execution
after a WARNING.
Here are two exemples. The first one is done on PPC32 (which
benefits from the previous patch), the second is on PPC64.
unsigned long test(struct pt_regs *regs)
{
int ret;
WARN_ON(regs->msr & MSR_PR);
return regs->gpr[3];
}
unsigned long test9w(unsigned long a, unsigned long b)
{
if (WARN_ON(!b))
return 0;
return a / b;
}
Before the patch:
000003a8 <test>:
3a8: 81 23 00 84 lwz r9,132(r3)
3ac: 71 29 40 00 andi. r9,r9,16384
3b0: 40 82 00 0c bne 3bc <test+0x14>
3b4: 80 63 00 0c lwz r3,12(r3)
3b8: 4e 80 00 20 blr
3bc: 0f e0 00 00 twui r0,0
3c0: 80 63 00 0c lwz r3,12(r3)
3c4: 4e 80 00 20 blr
0000000000000bf0 <.test9w>:
bf0: 7c 89 00 74 cntlzd r9,r4
bf4: 79 29 d1 82 rldicl r9,r9,58,6
bf8: 0b 09 00 00 tdnei r9,0
bfc: 2c 24 00 00 cmpdi r4,0
c00: 41 82 00 0c beq c0c <.test9w+0x1c>
c04: 7c 63 23 92 divdu r3,r3,r4
c08: 4e 80 00 20 blr
c0c: 38 60 00 00 li r3,0
c10: 4e 80 00 20 blr
After the patch:
000003a8 <test>:
3a8: 81 23 00 84 lwz r9,132(r3)
3ac: 71 29 40 00 andi. r9,r9,16384
3b0: 40 82 00 0c bne 3bc <test+0x14>
3b4: 80 63 00 0c lwz r3,12(r3)
3b8: 4e 80 00 20 blr
3bc: 0f e0 00 00 twui r0,0
0000000000000c50 <.test9w>:
c50: 7c 89 00 74 cntlzd r9,r4
c54: 79 29 d1 82 rldicl r9,r9,58,6
c58: 0b 09 00 00 tdnei r9,0
c5c: 7c 63 23 92 divdu r3,r3,r4
c60: 4e 80 00 20 blr
c70: 38 60 00 00 li r3,0
c74: 4e 80 00 20 blr
In the first exemple, we see GCC doesn't need to duplicate what
happens after the trap.
In the second exemple, we see that GCC doesn't need to emit a test
and a branch in the likely path in addition to the trap.
We've got some WARN_ON() in .softirqentry.text section so it needs
to be added in the OTHER_TEXT_SECTIONS in modpost.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/389962b1b702e3c78d169e59bcfac56282889173.1618331882.git.christophe.leroy@csgroup.eu
|
|
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h
9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp")
9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins")
099fdeda659d ("bnxt_en: Event handler for PPS events")
kernel/bpf/helpers.c
include/linux/bpf-cgroup.h
a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()")
c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current")
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray")
2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer")
MAINTAINERS
7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo")
7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 2c12c8103d8f ("scripts/kernel-doc: optionally treat
warnings as errors"), the kernel-doc script will treat warnings as
errors when one of the following conditions is true:
- The KDOC_WERROR environment variable is non-zero
- The KCFLAGS environment variable contains -Werror
- The -Werror parameter is passed to kernel-doc
Checking KCFLAGS for -Werror allows piggy-backing on the C compiler
error handling. However, unlike the C compiler, kernel-doc has no
provision for -Wno-error. This makes compiling the kernel with -Werror
(to catch regressions) and W=1 (to enable more checks) always fail,
without the same possibility as offered by the C compiler to treating
some selected warnings as warnings despite the global -Werror setting.
To fix this, evaluate KDOC_WERROR after KCFLAGS, which allows disabling
the warnings-as-errors behaviour of kernel-doc selectively by setting
KDOC_WERROR=0.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20210730225401.4401-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
