aboutsummaryrefslogtreecommitdiff
path: root/sound/firewire/dice
AgeCommit message (Collapse)Author
2019-02-06ALSA: firewire: Remove superfluous snd_info_register() callsTakashi Iwai
The calls of snd_info_register() are superfluous and should be avoided at the procfs creation time. They are called at the end of the whole initialization via snd_card_register(). This patch drops such superfluous calls. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-28ALSA: dice: add support for Solid State Logic Duende Classic/MiniTakashi Sakamoto
Duende Classic was produced by Solid State Logic in 2006, as a first model of Duende DSP series. The following model, Duende Mini was produced in 2008. They are designed to receive isochronous packets for PCM frames via IEEE 1394 bus, perform signal processing by downloaded program, then transfer isochronous packets for converted PCM frames. These two models includes the same embedded board, consists of several ICs below: - Texus Instruments Inc, TSB41AB3 for physical layer of IEEE 1394 bus - WaveFront semiconductor, DICE II STD ASIC for link/protocol layer - Altera MAX 3000A CPLD for programs - Analog devices, SHARC ADSP-21363 for signal processing (4 chips) This commit adds support for the two models to ALSA dice driver. Like support for the other devices, packet streaming is just available. Userspace applications should be developed if full features became available; e.g. program uploader and parameter controller. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': False, 'chip_ID': 349771402425, 'cmc': True, 'cyc_clk_acc': 255, 'generation': 1, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 20674, 'pmc': False}, 'root-directory': [ ['VENDOR', 20674], ['DESCRIPTOR', 'Solid State Logic'], ['MODEL', 112], ['DESCRIPTOR', 'Duende board'], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': True}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], [ 'UNIT', [ ['SPECIFIER_ID', 20674], ['VERSION', 1], ['MODEL', 112], ['DESCRIPTOR', 'Duende board']]]]} Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-27ALSA: dice: fix to wait for releases of all ALSA character devicesTakashi Sakamoto
In a development period for Linux kernel v4.20, drivers in ALSA firewire stack were changed to wait for releases of all ALSA character devices at .remove callback of bus driver. However, ALSA dice driver is partly out of this change. This bug can bring fault to user process which holds the last of character device in unplugging. This commit fixes the driver to wait in the callback. Fixes: 61ccc6f6b27c ('ALSA: firewire: block .remove callback of bus driver till all of ALSA character devices are released') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-10ALSA: firewire: simplify cleanup process when failing to register sound cardTakashi Sakamoto
In former commits, .private_free callback releases resources just for data transmission. This release function can be called without the resources are actually allocated in error paths. This commit applies a small refactoring to clean up codes in error paths. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-10ALSA: firewire: release reference count of firewire unit in .remove callback ↵Takashi Sakamoto
of bus driver In a previous commit, drivers in ALSA firewire stack blocks .remove callback of bus driver. This enables to release members of private data in the callback after releasing device of sound card. This commit simplifies codes to release the members. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04ALSA: firewire: use managed-resource of fw unit device for private dataTakashi Sakamoto
At present, private data of each driver in ALSA firewire stack is allocated/freed by kernel slab allocator for corresponding unit on IEEE 1394 bus. In this case, resource-managed slab allocator is available to release memory object automatically just before releasing device structure for the unit. This idea can prevent runtime from memory leak due to programming mistakes. This commit uses the allocator for the private data. These drivers already use reference counter to maintain lifetime of device structure for the unit by a pair of fw_unit_get()/fw_unit_put(). The private data is safely released in a callback of 'struct snd_card.private_free(). Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-12Merge branch 'for-next' into for-linusTakashi Iwai
Preparation for 4.19 merge material. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-06ALSA: dice: fix wrong copy to rx parameters for Alesis iO26Takashi Sakamoto
A commit 28b208f600a3 ('ALSA: dice: add parameters of stream formats for models produced by Alesis') adds wrong copy to rx parameters instead of tx parameters for Alesis iO26. This commit fixes the bug for v4.18-rc8. Fixes: 28b208f600a3 ('ALSA: dice: add parameters of stream formats for models produced by Alesis') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # v4.18 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-18ALSA: pcm: Nuke snd_pcm_lib_mmap_vmalloc()Takashi Iwai
snd_pcm_lib_mmap_vmalloc() was supposed to be implemented with somewhat special for vmalloc handling, but in the end, this turned to just the default handler, i.e. NULL. As the situation has never changed over decades, let's rip it off. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-28sound: Use octal not symbolic permissionsJoe Perches
Convert the S_<FOO> symbolic permissions to their octal equivalents as using octal and not symbolic permissions is preferred by many as more readable. see: https://lkml.org/lkml/2016/8/2/1945 Done with automated conversion via: $ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...> Miscellanea: o Wrapped one multi-line call to a single line Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-27ALSA: dice: unuse second stream for MIDI conformant data channel for TC ↵Takashi Sakamoto
Electronic models At present, all of models produced by TC Electronic except for Konnekt Live are supported with hard-coded their stream formats. Studio Konnekt 48 is sore model to support dual streams for both directions. The second stream has no MIDI conformant data channel in its data block. But current implementation transfers the second stream with MIDI conformant data channel. This commit fixes this issue. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-27ALSA: dice: fix stream format parameters for TC Electronic Studio Konnekt 48Takashi Sakamoto
TC Electronic Studio Konnekt 48 is an application of combination of WaveFront Dice II STD and TC Applied Technologies (TCAT) TCD2210 (Dice Mini). The latter is on a board with BNC and optical interfaces, thus used for signal processing for word clock, S/PDIF and ADAT. This model doesn't support TCAT extended application protocol. For such devices, ALSA dice driver needs to have hard-coded parameters for stream formats. This commit fixes stream format parameters for this model. Unfortunately, at sampling transmission frequencies over 48.0kHz, I confirmed that current ALSA dice driver doesn't drive the device appropriately to generate sounds (silence). I guess that this comes from timestamping quirk of Dice-based devices, which I reported. [alsa-devel] Dice packet sequence quirk and ALSA firewire stack in Linux 4.6 http://mailman.alsa-project.org/pipermail/alsa-devel/2016-May/107715.html $ cd linux-firewire-utils/src $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04044a26 bus_info_length 4, crc_length 4, crc 18982 404 31333934 bus_name "1394" 408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255, max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400) 40c 00016604 company_id 000166 | 410 08a65810 device_id 0408a65810 | EUI-64 0001660408a65810 root directory ----------------------------------------------------------------- 414 00062ab9 directory_length 6, crc 10937 418 03000166 vendor 41c 8100000a --> descriptor leaf at 444 420 17000022 model 424 8100000f --> descriptor leaf at 460 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ----------------------------------------------------------------- 430 0004d5c5 directory_length 4, crc 54725 434 12000166 specifier id 438 13000001 version 43c 17000022 model 440 8100000f --> descriptor leaf at 47c descriptor leaf at 444 ----------------------------------------------------------------- 444 0006c490 leaf_length 6, crc 50320 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 54432045 "TC E" 454 6c656374 "lect" 458 726f6e69 "roni" 45c 63000000 "c" descriptor leaf at 460 ----------------------------------------------------------------- 460 0006e08e leaf_length 6, crc 57486 464 00000000 textual descriptor 468 00000000 minimal ASCII 46c 53747564 "Stud" 470 696f4b6f "ioKo" 474 6e6e656b "nnek" 478 74343800 "t48" descriptor leaf at 47c ----------------------------------------------------------------- 47c 0006e08e leaf_length 6, crc 57486 480 00000000 textual descriptor 484 00000000 minimal ASCII 488 53747564 "Stud" 48c 696f4b6f "ioKo" 490 6e6e656b "nnek" 494 74343800 "t48" Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-21ALSA: dice: add stream format parameters for TC Electronic Digital Konnekt x32Takashi Sakamoto
TC Electronic Digital Konnekt x32 is an application of WaveFront DiceII STD and doesn't support TCAT extended application protocol. For such devices, ALSA dice driver needs to have hard-coded parameters for stream formats. This commit adds stream format parameters for this model. Unfortunately, at sampling transmission frequencies of 88.2/96.0kHz, I confirmed that current ALSA dice driver doesn't drive the device appropriately due to detecting packet discontinuities. $ journalctl kernel: snd_dice fw1.0: Detect discontinuity of CIP: 90 80 At the frequencies, the device transfers 16 data blocks per packet and 16 data channels per data block, as a result one packet includes 1032 bytes if it's not NODATA. However, as long as I checked, the device often postpone packet transmission and continue with truncated payload than metadata in isochronous packet header. Below is a sample of sequence I got. sec cycle bytes CIP1 CIP2 37 3314 1032 0x01100090 0x900449E2 37 3315 8 0x011000A0 0x9004FFFF 37 3316 1032 0x011000A0 0x900461E2 37 3317 1032 0x011000B0 0x900475E2 37 3318 1032 0x011000C0 0x900489E2 37 3319 8 0x011000D0 0x9004FFFF 37 3320 1032 0x011000D0 0x9004A1E2 37 3321 1032 0x011000E0 0x9004B5E2 37 3322 1032 0x011000F0 0x9004C9E2 37 3323 8 0x01100000 0x9004FFFF 37 3324 1032 0x01100000 0x9004E1E2 37 3325 1032 0x01100010 0x9004F5E2 37 3326 1032 0x01100020 0x900409E2 37 3327 8 0x01100030 0x9004FFFF 37 3328 1032 0x01100030 0x900421E2 37 3329 1032 0x01100040 0x900435E2 37 3330 (skip) 37 3331 (skip) 37 3332 (skip) 37 3333 (skip) 37 3334 (skip) 37 3335 (skip) 37 3336 (skip) 37 3337 (skip) 37 3338 (skip) 37 3339 (skip) 37 3340 (skip) 37 3341 (skip) 37 3342 (skip) 37 3343 (skip) 37 3344 (skip) 37 3345 (skip) 37 3346 (skip) 37 3347 (skip) 37 3348 (skip) 37 3349 (skip) 37 3350 (skip) 37 3351 (skip) 37 3352 (skip) 37 3353 (skip) 37 3354 (skip) 37 3355 (skip) 37 3356 (skip) 37 3357 (skip) 37 3358 (skip) 37 3359 (skip) 37 3360 (skip) 37 3361 (skip) 37 3362 (skip) 37 3363 (skip) 37 3364 (skip) 37 3365 (skip) 37 3366 (skip) 37 3367 1032 0x01100050 0x900461E1 37 3368 1032 0x01100060 0x900475E1 37 3369 1032 0x01100070 0x9004A1E1 37 3370 1032 0x01100080 0x9004A1E1 but content of payload is truncated. 37 3371 (skip) 37 3371 1032 0x01100080 0x9004B5E0 detect discontinuity 37 3372 1032 0x01100090 0x9004C9E0 37 3373 1032 0x011000A0 0x9004E1E0 37 3374 1032 0x011000B0 0x9004F5E0 37 3375 1032 0x011000C0 0x900409E0 37 3376 1032 0x011000D0 0x900421E0 37 3377 1032 0x011000E0 0x900435E0 37 3378 1032 0x011000F0 0x900449DF 37 3379 8 0x01100000 0x9004FFFF 37 3380 1032 0x01100000 0x900461DF 37 3381 1032 0x01100010 0x900475DF 37 3382 1032 0x01100020 0x900489DF 37 3383 8 0x01100030 0x9004FFFF 37 3384 1032 0x01100030 0x9004A1DF 37 3385 1032 0x01100040 0x9004B5DF 37 3386 1032 0x01100050 0x9004C9DF 37 3387 8 0x01100060 0x9004FFFF I cannot confirm this quirks with Windows driver. ALSA dice driver has a cause if assumed differences between these two drivers are ways of timestampling to RX packets from the drivers to the device. I've already reported timestamping quirk of Dice-based devices and this might bring this issue. [alsa-devel] Dice packet sequence quirk and ALSA firewire stack in Linux 4.6 http://mailman.alsa-project.org/pipermail/alsa-devel/2016-May/107715.html Well, nevertheless, I enable ALSA dice driver to work at the frequencies. This may brings inconvenience to users but I expect developers and users to fix it. $ cd linux-firewire-utils/src $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 040423bb bus_info_length 4, crc_length 4, crc 9147 404 31333934 bus_name "1394" 408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255, max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400) 40c 00016604 company_id 000166 | 410 0c232c28 device_id 040c232c28 | EUI-64 000166040c232c28 root directory ----------------------------------------------------------------- 414 0006b6cb directory_length 6, crc 46795 418 03000166 vendor 41c 8100000a --> descriptor leaf at 444 420 17000030 model 424 8100000f --> descriptor leaf at 460 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ----------------------------------------------------------------- 430 000476c2 directory_length 4, crc 30402 434 12000166 specifier id 438 13000001 version 43c 17000030 model 440 81000010 --> descriptor leaf at 480 descriptor leaf at 444 ----------------------------------------------------------------- 444 0006c490 leaf_length 6, crc 50320 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 54432045 "TC E" 454 6c656374 "lect" 458 726f6e69 "roni" 45c 63000000 "c" descriptor leaf at 460 ----------------------------------------------------------------- 460 000772b4 leaf_length 7, crc 29364 464 00000000 textual descriptor 468 00000000 minimal ASCII 46c 44696769 "Digi" 470 74616c4b "talK" 474 6f6e6e65 "onne" 478 6b747833 "ktx3" 47c 32000000 "2" descriptor leaf at 480 ----------------------------------------------------------------- 480 000772b4 leaf_length 7, crc 29364 484 00000000 textual descriptor 488 00000000 minimal ASCII 48c 44696769 "Digi" 490 74616c4b "talK" 494 6f6e6e65 "onne" 498 6b747833 "ktx3" 49c 32000000 "2" Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-18ALSA: dice: fix a bounds check in snd_dice_detect_tcelectronic_formats()Dan Carpenter
The "entry" pointer is always non-NULL so this test for out of bounds won't work. Fixes: f1f0f330b1d0 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-18ALSA: dice: add stream format parameters for Mytek devicesMelvin Vermeeren
--nextPart3916812.EicPReet6m Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Mytek manufactures some equipment with DICE-based firewire ports. These devices contain old versions of DICE firmware which lacks detailed stream format reporting for all sampling clock modes. Building upon the recent work by Takashi Sakamoto, hard-coded parameters are added for the Stereo 192 DSD-DAC. When the device vendor and model match the coded parameters are copied into the stream format cache. Signed-off-by: Melvin Vermeeren <mail@mel.vin> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-15Merge branch 'for-linus' into for-nextTakashi Iwai
Back-merge of UAC3 fixes for applying further enhancements. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: remove local frag of force_two_pcmsTakashi Sakamoto
At present, to add PCM substreams for each of available tx/rx streams, this driver uses a condition based on model-name. This is not enough to support unknown models. In former commits, this driver gains cache of stream formats. For models which support protocol extension, all of available steam formats are cached. For known models, hard-coded stream formats are used to generate the cache. For unknown models, stream formats at current mode of sampling transmission frequency is cached. Anyway, at least, the cached formats are used to expose constrains of PCM substreams for userspace applications. Thus, The cached data can be also used to add PCM substreams themselves, instead of the name-based conditions. This commit obsoletes local frag of force_two_pcms. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: use cache for PCM constraints and rulesTakashi Sakamoto
In former commits, proxy structure gets members for cache of stream formats. The cache allows to apply correct constraints and rules to runtime of PCM substream. They allows userspace applications to change current sampling transmission frequency. This commit uses the cacher for the PCM constraints and rules. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: use stream formats to add MIDI substreamsTakashi Sakamoto
In former commits, proxy structure gets members for cache of stream formats. The cache can be used to count the number of MIDI substreams to add. This commit uses the cache for this purpose. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: enable to change current sampling transmission frequencyTakashi Sakamoto
This is a preparation for userspace applications to change current sampling transmission frequency via ALSA PCM interface. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: add a helper function to restart all of available streamsTakashi Sakamoto
This commit is a small refactoring for better readability. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: use cache of stream format to check running streamTakashi Sakamoto
At present, to check running stream, available stream formats are used at current sampling transmission frequency (stf). But when changing stf, it's convenient to use cache of stream formats. This commit applies this idea. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: use extended protocol to detect available stream formatsTakashi Sakamoto
TC Applied Technologies (TCAT) have added extension to DICE protocol. This protocol extension is called as Extended Application Protocol, a.k.a. EAP. In this protocol extension, units get additional 9 address spaces. One of it is for current configuration. In this address space, a pair of router and stream formats are exposed per mode of three sampling transmission frequencies. This commit adds support the protocol extension for address space of the current configuration to generate cache of stream formats. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: add parameters of stream formats for models produced by AlesisTakashi Sakamoto
Alesis shipped some models with DICE ASICs. All of them just support DICE original protocol and drivers can't retrieve all of available stream formats without changing status of sampling transmission frequency actually. This commit puts some hard-coded parameters for the models. When detecting the models, the corresponding parameters are copied as cache of stream formats. I note that each of pair of iO14/iO26 and MultiMix 8/12/16 has the same model ID on their configuration ROM. The MultiMix 8/12/16 just support one mode for sampling transmission frequency and ALSA dice driver already handles them correctly. The iO14/iO26 support three modes and need hard-coded parameters. To distinguish these two models, this commit let the driver to retrieve current stream formats and compare it to known parameters, then decide it. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: add parameters of stream formats for models produced by TC ↵Takashi Sakamoto
Electronic TC Electronic shipped some models with DICE ASICs. All of them just support DICE original protocol and drivers can't retrieve all of available stream formats without changing status of sampling transmission frequency actually. This commit puts some hard-coded parameters for the models. When detecting the models, the corresponding parameters are copied as cache of stream formats. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: cache stream formats at current mode of sampling transmission ↵Takashi Sakamoto
frequency In former commits, proxy structure get members for cache of stream formats. This commit fills the cache with stream formats at current mode of sampling transmission frequency. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: add proc node for stream formationTakashi Sakamoto
Products with DICE interface in market can support variable stream formats for three levels of sampling transmission frequencies. To record these formats, a proxy structure got several fields in former commit. This commit adds a proc node to output the stream formats for debugging purpose. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: add 'firewire' directory for proc nodesTakashi Sakamoto
Unlike the other drivers in ALSA firewire stack, ALSA dice driver does't create 'firewire' directory for proc nodes because it has 'dice' node only. But this is inconvenient because I have a plan to add another proc node to output available stream formats from cache. This commit let the driver to create the directory and put 'dice' node into it. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: dice: add cache of stream formatsTakashi Sakamoto
A previous commit 6f688268b3f4 ('ALSA: dice: purge generating channel cache') purged cache of stream formats. DICE interface originally has no feature to assist drivers to retrieve available formats for all of supported sampling transmission frequencies, without changing the frequency actually. For later release of Dice ASICs such as TCD2210, Dice interface has extended protocol and can support the feature. This assists drivers to retrieve available stream formats. This commit is a first step to regain the cache to generate PCM rules for all of supported sampling transmission frequencies. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-26ALSA: dice: fix error path to destroy initialized stream dataTakashi Sakamoto
In error path of snd_dice_stream_init_duplex(), stream data for incoming packet can be left to be initialized. This commit fixes it. Fixes: 436b5abe2224 ('ALSA: dice: handle whole available isochronous streams') Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-25Merge branch 'for-linus' into for-nextTakashi Iwai
Back-merge 4.17-rc3 fixes for further development. This will bump the base to 4.17-rc2, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-24ALSA: dice: improve support for ancient firmware for DICETakashi Sakamoto
In early stage of firmware SDK, DICE seems to lose its backward compatibility due to some registers on global address section. I found this with Alesis Multimix 12 FireWire with ancient firmware (approx. shipped version). According to retrieved log from the unit, global section has 96 byte space. On the other hand, current version of ALSA dice driver assumes that all of supported unit has at least 100 byte space. $ ./firewire-request /dev/fw1 read 0xffffe0000000 28 result: 000: 00 00 00 0a 00 00 00 18 00 00 00 22 00 00 00 8a result: 010: 00 00 00 ac 00 00 01 12 00 00 00 00 00 00 00 00 result: 020: 00 00 00 00 00 00 00 00 This commit adds support for the ancient firmware. Check of global section is loosened to accept the smaller space. The lack of information is already compensated by hard-coded parameters. I experienced that the latest version of Windows driver for this model can't handle this unit, too. This means that TCAT releases firmware SDK without backward compatibility for the ancient firmware. Below list is a early history of driver/firmware package released by Alesis. I investigated on wayback machine on Internet Archive: * Unknown: PAL v1.0.41.2, firmware v1.0.3 * Mar 2006: PAL v1.54.0, firmware v1.0.4 * Dec 2006: PAL v2.0.0.2, firmware v2.0 * Jun 2007: PAL v3.0.41.5, firmware v2.0 * Jul 2007: PAL v3.0.56.2. firmware v2.0 * Jan 2008: PAL v3.0.81.1080, firmware v2.0 If I can assume that firmware version is the same as DICE version, DICE version for the issued firmware may be v1.0.3. According to code base of userspace driver project (FFADO), I can read DICE v1.0.4 supports global space larger than 100 byte. I guess the smaller space of global section is a feature of DICE v1.0.3. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-24ALSA: dice: fix OUI for TC groupTakashi Sakamoto
OUI for TC Electronic is 0x000166, for TC GROUP A/S. 0x001486 is for Echo Digital Audio Corporation. Fixes: 7cafc65b3aa1 ('ALSA: dice: force to add two pcm devices for listed models') Cc: <stable@vger.kernel.org> # v4.6+ Reference: http://standards-oui.ieee.org/oui/oui.txt Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27sound: annotate ->poll() instancesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-22ALSA: firewire: add const qualifier to identifiers for read-only symbolsTakashi Sakamoto
Drivers in ALSA firewire stack still includes some symbols which can be moved to a section for read-only symbols. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-08ALSA: firewire: arrange common PCM info/constraints for AMDTP engine ↵Takashi Sakamoto
applications In ALSA firewire stack, 8 drivers uses IEC 61883-1/6 engine for data transmission. They have common PCM info/constraints and duplicated codes. This commit unifies the codes into fireiwre-lib. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-07ALSA: firewire: process packets in 'struct snd_pcm_ops.ack' callbackTakashi Sakamoto
In recent commit for ALSA PCM core, some arrangement is done for 'struct snd_pcm_ops.ack' callback. This is called when appl_ptr is explicitly moved in intermediate buffer for PCM frames, except for some cases described later. For drivers in ALSA firewire stack, usage of this callback has a merit to reduce latency between time of PCM frame queueing and handling actual packets in recent isochronous cycle, because no need to wait for software IRQ context from isochronous context of OHCI 1394. If this works well in a case that mapped page frame is used for the intermediate buffer, user process should execute some commands for ioctl(2) to tell the number of handled PCM frames in the intermediate buffer just after handling them. Therefore, at present, with a combination of below conditions, this doesn't work as expected and user process should wait for the software IRQ context as usual: - when ALSA PCM core judges page frame mapping is available for status data (struct snd_pcm_mmap_status) and control data (struct snd_pcm_mmap_control). - user process handles PCM frames by loop just with 'snd_pcm_mmap_begin()' and 'snd_pcm_mmap_commit()'. - user process uses PCM hw plugin in alsa-lib to operate I/O without 'sync_ptr_ioctl' option. Unfortunately, major use case include these three conditions. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-22ALSA: firewire: remove support for 16 bit PCM samples in playback substreamTakashi Sakamoto
In IEC 61883-6, AM824 is described as format of data block. In this format, one data block consists of several data channels, which is aligned to 32 bit. One data channel has 8 bit label field and 24 bit data field. PCM frames are transferred in Multi Bit Linear Audio (MBLA) data channel. This channel can include 16/20/24 bit PCM sample. As long as I know, models which support IEC 61883-1/6 doesn't allow to switch bit length of PCM sample in MBLA data channel. They always transmit/receive PCM frames of 24 bit length. This can be seen for the other models which support protocols similar to IEC 61883-1/6. On the other hand, current drivers for these protocols supports 16 bit length PCM sample in playback substream. In this case, PCM sample is put into the MBLA data channel with 8 bit padding in LSB side. Although 16 bit PCM sample is major because it's in CD format, this doesn't represent device capability as is. This commit removes support for 16 bit PCM samples in playback substream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-12ALSA: firewire: Constify snd_rawmidi_opsTakashi Iwai
Now snd_rawmidi_ops is maintained as a const pointer in snd_rawmidi, we can constify the definitions. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05ALSA: dice: enclose identifiers referred by single functionTakashi Sakamoto
Some identifiers are referred just by one functions. In this case, they can be put into the function definition. This brings two merits; readers can easily follow codes related to the identifiers, developers are free from name conflict. This commit moves such identifiers to each function definition. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-03ALSA: dice: ensure transmission speed for transmitted packetsTakashi Sakamoto
As of kernel 4.10, ALSA dice driver is expected to be used in default speed. In most cases, it's S400. While, IEEE 1394 specification describes the other speed such as S800. According to 'TCD30XX User Guide', its link layer controller supports several transmission speed up to S800[0]. In Dice software interface, transmission speed in output direction can be configured by asynchronous transaction to 'TX_SPEED' offset in its address space. S800 may be available. This commit improves configuration of transmission unit before starting packet streaming for this purpose. The value of 'max_speed' in 'fw_device' data structure has available maximum speed decided in bus arbitration, thus it's within capacity of the unit. [0] TCD3xx User Guide - TCAT 1394 LLC, Revision 0.9.0-41360 (TC Applied Technologies, May 6 2015) http://www.tctechnologies.tc/index.php/support/support-hardware/dice-iii-detailed-documentation Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-02ALSA: firewire: constify snd_pcm_ops structuresJulia Lawall
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-08ALSA: dice: add support for M-Audio Profire 610 and perhaps 2626Takashi Sakamoto
M-Audio Profire 610 has an unexpected value in version field of its config ROM, thus ALSA dice driver is not assigned to the model due to a mismatch of modalias. This commit adds an entry to support the model. I expect the entry is also for Profire 2626. I note that Profire 610 uses TCD2220 (so-called Dice Jr.), and supports a part of Extended Application Protocol (EAP). $ cd linux-firewire-utils/src $ ./crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ------------------------------------------------------------ 400 04047689 bus_info_length 4, crc_length 4, crc 30345 404 31333934 bus_name "1394" 408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255, max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400) 40c 000d6c04 company_id 000d6c | 410 04400002 device_id 0404400002 | EUI-64 000d6c0404400002 root directory ------------------------------------------------------------ 414 000695fe directory_length 6, crc 38398 418 03000d6c vendor 41c 8100000a --> descriptor leaf at 444 420 17000011 model 424 8100000d --> descriptor leaf at 458 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ------------------------------------------------------------ 430 0004fb14 directory_length 4, crc 64276 434 12000d6c specifier id 438 130100d1 version 43c 17000011 model 440 8100000c --> descriptor leaf at 470 descriptor leaf at 444 ------------------------------------------------------------ 444 0004b8e4 leaf_length 4, crc 47332 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 4d2d4175 "M-Au" 454 64696f00 "dio" descriptor leaf at 458 ------------------------------------------------------------ 458 00053128 leaf_length 5, crc 12584 45c 00000000 textual descriptor 460 00000000 minimal ASCII 464 50726f46 "ProF" 468 69726520 "ire " 46c 36313000 "610" descriptor leaf at 470 ------------------------------------------------------------ 470 00053128 leaf_length 5, crc 12584 474 00000000 textual descriptor 478 00000000 minimal ASCII 47c 50726f46 "ProF" 480 69726520 "ire " 484 36313000 "610" $ cat /proc/asound/card1/dice sections: global: offset 10, size 90 tx: offset 100, size 142 rx: offset 242, size 282 ext_sync: offset 524, size 4 unused2: offset 0, size 0 global: owner: ffc0:000100000000 notification: 00000040 nick name: FW610 clock select: internal 48000 enable: 1 status: locked 48000 ext status: 00000040 sample rate: 48000 version: 1.0.4.0 clock caps: 32000 44100 48000 88200 96000 176400 192000 aes1 aes4 aes adat tdif wc arx1 arx2 internal clock source names: SPDIF\AES34\AES56\TOS\AES_ANY\ADAT\ADAT_AUX\Word Clock\Unused\Unused\Unused\Unused\Internal\\ ... Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-31ALSA: firewire-lib: add new function to schedule a work for sound card ↵Takashi Sakamoto
registration In former commit, ALSA dice driver postpone sound card registration after IEEE 1394 bus is calm. This idea has advantages for the other drivers. This commit adds a helper function for it to firewire-lib module. The function is really for the specific purpose. Callers should initialize delayed work structure with callback function. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-31ALSA: dice: simplify unit probe processingTakashi Sakamoto
In former commit, ALSA dice driver doesn't generate kernel warnings when unplugging units before initializing stream data. This commit moves the initialization to delayed registration of sound card, to simplify unit probe processing. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-28ALSA: dice: fix memory leak when unpluggingTakashi Sakamoto
When sound card is going to be released, dice private data is also released. Then all of data should be released. However, stream data is not released. This causes memory leak when unplugging dice unit. This commit fixes the bug. Fixes: 4bdc495c87b3('ALSA: dice: handle several PCM substreams when any isochronous streams are available') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-10ALSA: dice: use structure to represent register parameters instead of array ↵Takashi Sakamoto
with basic type element In dice interface, two blocks of register are accessible via IEEE 1394 asynchronous transaction to represent the number of supported isochronous streams and the number of quadlets for stream information. Current ALSA dice driver uses array with 'unsigned int' element for temporary cache of these information. But using structure is preferable for begin easily comprehensible. This commit applies a local structure for this aim. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 19:11:43 +0000