| Age | Commit message (Collapse) | Author |
|---|
|
After further investigation, I find out some mistakes for 896 about its
register. This commit fixes it.
Fixes: b431f16f1685 ("ALSA: firewire-motu: add support for MOTU 896")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-10-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After further investigation, I find out some mistakes for 828 about its
register. This commit fixes it.
Fixes: d13d6b284d8b ("ALSA: firewire-motu: add support for MOTU 828")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This
model consists of three chips:
* Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus)
* Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and
packet processing layer)
* QuickLogic QuickRAM QL4016 (Data block processing layer and digital
signal processing)
This commit adds a support for the model, with its unique protocol as
version 1. The features of this protocol are:
* no MIDI support.
* Rx packets have no data chunks for control and status messages.
* Tx packets have 2 bytes for control and status messages in the end of
each data block.
* The most of settings are represented in bit flag in one quadlet address
(0x'ffff'f000'0b14).
* It's selectable to use signal on optical interface, however the device
has no register specific to it. The state has effect just to whether
to exclude differed data chunks.
* The internal multiplexer is not configured by software.
Just after powering on, the device has a quirk to fail handling
transaction. I recommend users to connect the device enough after powering
on.
$ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04102814 bus_info_length 4, crc_length 16, crc 10260
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 0003ab34 directory_length 3, crc 43828
42c 120001f2 specifier id
430 13000002 version
434 17102801 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002057d leaf_length 2, crc 1405
43c 0001f200 company_id 0001f2 |
440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This
model consists of three chips:
* Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus)
* Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and
packet processing layer)
* QuickLogic QuickRAM QL4016 (Data block processing layer and digital
signal processing)
This commit adds a support for this model, with its unique protocol as
version 1. The features of this protocol are:
* no MIDI support.
* Rx packets have no data chunks for control and status messages.
* Tx packets have 2 data chunks for control and status messages in the
end of each data block. The chunks consist of data block counter
(4 byte) and message (2 byte).
* All of settings are represented in bit flag in one quadlet address
(0x'ffff'f000'0b00).
* When optical interface is configured as S/PDIF, signals of the interface
is multiplexed for packets, instead of signals of coaxial interface.
* The internal multiplexer is not configured by software.
I note that the device has a quirk to mute output voluntarily during
receiving batch of packets in the beginning of packet streaming. The
operation to unmute should be done by software enough after the device
shifts the state, however it's not deterministic. Furthermore, just
after switching rate of sampling clock, the device keeps the state longer.
This patch manages to sleep 100 msec before unmute operation, but it may
fail to release the mute in the case that the rate is changed. As a
workaround, users can restart packet streaming at the same rate, or write
to specific register from userspace.
$ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04105c54 bus_info_length 4, crc_length 16, crc 23636
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 00005015 device_id 0000005015 | EUI-64 0001f20000005015
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 00035052 directory_length 3, crc 20562
42c 120001f2 specifier id
430 13000001 version
434 17101800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002eeb6 leaf_length 2, crc 61110
43c 0001f200 company_id 0001f2 |
440 00005015 device_id 0000005015 | EUI-64 0001f20000005015
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
