aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2015-11-23ASoC: davinci-mcasp: Fix master capture only modePeter Ujfalusi
When McASP is used as TX/RX synchronous (TX side generating clocks for RX side also) and only capture is used we need to configure the number of TX slots in order McASP to be able to generate the Frame sync. Fixes: 9273de1940d9e ("ASoC: davinci-mcasp: Add set_tdm_slots() support") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10ASoC: davinci-mcasp: Fix TDM slot rx/tx mask associationsAndreas Dannenberg
Fixes the associations between the tx_mask and rx_mask and the associated playback / capture streams during setting of the TDM slot. With this patch in place it is now possible for example to only populate tx_mask (leaving rx_mask as 0) for output-only codecs to control the TDM slot(s) the McASP serial port uses for transmit. Before that, this scenario would incorrectly rely on the rx_mask for this. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-26Merge remote-tracking branches 'asoc/topic/wm8904', 'asoc/topic/wm8955' and ↵Mark Brown
'asoc/topic/wm8960' into asoc-next
2015-10-26Merge remote-tracking branches 'asoc/topic/topology', 'asoc/topic/wm2000', ↵Mark Brown
'asoc/topic/wm8731' and 'asoc/topic/wm8903' into asoc-next
2015-10-26Merge remote-tracking branches 'asoc/topic/ssm2518' and 'asoc/topic/sunxi' ↵Mark Brown
into asoc-next
2015-10-26Merge remote-tracking branches 'asoc/topic/rt298', 'asoc/topic/rt5640', ↵Mark Brown
'asoc/topic/samsung' and 'asoc/topic/sh' into asoc-next
2015-10-26Merge remote-tracking branches 'asoc/topic/rcar', 'asoc/topic/rl6347a', ↵Mark Brown
'asoc/topic/rockchip' and 'asoc/topic/rt286' into asoc-next
2015-10-26Merge remote-tracking branches 'asoc/topic/nau8825' and 'asoc/topic/pxa' ↵Mark Brown
into asoc-next
2015-10-26Merge remote-tracking branches 'asoc/topic/imx' and 'asoc/topic/intel' into ↵Mark Brown
asoc-next
2015-10-26Merge remote-tracking branches 'asoc/topic/dwc', 'asoc/topic/es8328', ↵Mark Brown
'asoc/topic/fsl' and 'asoc/topic/fsl-card' into asoc-next
2015-10-26Merge remote-tracking branch 'asoc/topic/da7219' into asoc-nextMark Brown
2015-10-26Merge remote-tracking branches 'asoc/topic/atmel-classd' and ↵Mark Brown
'asoc/topic/da7213' into asoc-next
2015-10-26Merge remote-tracking branches 'asoc/topic/ad193x' and 'asoc/topic/arizona' ↵Mark Brown
into asoc-next
2015-10-26Merge remote-tracking branch 'asoc/topic/rt5645' into asoc-nextMark Brown
2015-10-26Merge remote-tracking branch 'asoc/topic/dapm' into asoc-nextMark Brown
2015-10-26Merge remote-tracking branch 'asoc/topic/core' into asoc-nextMark Brown
2015-10-26Merge tag 'asoc-v4.3-rc2' into asoc-nextMark Brown
ASoC: Updates for v4.4 A first batch of updates targetted at v4.4. There are no substantial core fixes here, the biggest block of changes is updates to the rcar drivers and the addition of a CODEC driver for the AK4613. # gpg: Signature made Fri 25 Sep 2015 05:37:06 KST using RSA key ID 5D5487D0 # gpg: key CD7BEEBC: no public key for trusted key - skipped # gpg: key CD7BEEBC marked as ultimately trusted # gpg: key AF88CD16: no public key for trusted key - skipped # gpg: key AF88CD16 marked as ultimately trusted # gpg: key 16005C11: no public key for trusted key - skipped # gpg: key 16005C11 marked as ultimately trusted # gpg: key 5621E907: no public key for trusted key - skipped # gpg: key 5621E907 marked as ultimately trusted # gpg: key 5C6153AD: no public key for trusted key - skipped # gpg: key 5C6153AD marked as ultimately trusted # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
2015-10-26ASoC: fsl: Use #ifdef instead of #if for CONFIG_PM_SLEEPNicolin Chen
Change them to #ifdef as CONFIG_PM_SLEEP might not be defined at all. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-26Merge branch 'topic/fsl-mega-fast' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-fsl
2015-10-26ASoC: rt5645: Sort the order for register bit definesAxel Lin
So we have consistent order for register bit defines. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24ASoC: dwc: add check for master/slave formatMaruthi Srinivas Bayyavarapu
DW i2s controller's master/slave config can be read from a read-only register. Machine driver can try to set a master/slave format on cpu-dai using 'set_fmt' of dai ops. A check is added to verify codec is master when dwc is slave and vice-versa. Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24ASoC: rt5645: Add the HWEQ for the speaker outputOder Chiou
The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24ASoC: Intel: Skylake: Add support to topology for module static pinJeeja KP
Some module pin connection are static and defined by the topology. This patch adds support for static pin definitions in topology widget private data Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24ASoC: Intel: Skylake: Fix to set Non gateway copier cfgJeeja KP
If copier instance is connected to a DMA gateway then driver needs to configure the gateway configuration otherwise set it to invalid. This patch sets the non gateway copier node value to invalid. Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24ASoC: Intel: Skylake: Fix to check return value of dsp initJeeja KP
If DSP initialization fails, ipc to disable notification will cause NULL ptr exception as ipc is not initialized. This patch returns error if dsp init fails before sending disable notification ipc. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24ASoC: Intel: Skylake: Add support to disable module notificationsJeeja KP
Each FW modules can report underrun/overrun notification from all modules. This patch disables underrun/overrun notification after firmware is loaded. This will be supportted for debug mode only thru debugfs Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24ASoC: Intel: Skylake: Update for ssp node index in copier cfgJeeja KP
DSP firmware has interface change for SSP node index structure. New FW interface removes the dual_mono field and adds 4 bits for TDM slot group index. This patch updates the ssp dma to align with the DSP firmware structure. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24ASoC: Intel: Skylake: Fix to fill all sink/source pipe paramsSubhransu S. Prusty
Currently params only for first copier widget identified in the source/sink path is queried from NHLT. In the dapm route the playback/capture widget may be connected to more than one copier widget. This patch adds return check to return only for any error case. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24ASoC: Intel: Skylake: Fix to use correct macros for the path iterationSubhransu S. Prusty
In case of playback, for the BE dai source path should be iterated to find the pipe params. With sink path iterated, this resulted in a loop and kernel panic with page request failure. Similar are the cases for Capture and FE dais. Using correct macros to fix the panic Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24ASoC: Intel: Skylake: Remove BE copier blob memcpyJeeja KP
The BE copier private data allowed endpoint configuration blobs, now these are queried from BIOS, we don't need to copy the blob, but only capability. Removing the blob from private data will not allocate memory for module specific config in which case memcpy will fail. Fix is to assign the ptr queried from the NHLT table for the endpoint configuration. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24ASoC: Intel: Skylake: Fix return for pm_runtime_get_sync()Jeeja KP
pm_runtime_get_sync() will return a negative value in case of error and can return postive value for success. The return check for pm_runtime_get_sync() must be less than 0, so fix it Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23Merge tag 'asoc-fix-v4.3-rc6' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.3 A bunch of driver fixes plus one core fix which fixes problems with misreporting values from _SX controls following a recent refactoring. This had gone unnoticed as such controls are quite rare.
2015-10-23ASoC: fsl_sai: Constify rate constraintsLars-Peter Clausen
The rate constraints in this driver are shared between all device instances. It should not be (and is not) modified at runtime, so make them const. While we are at it also change the type of the rates array from u32 to unsigned int. While both resolve to the same type, u32 is usually used to empathize that the value is for a 32-bit hardware register or similar which makes it slightly confusing in this context. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: rx1950_uda1380: Constify rate constraintsLars-Peter Clausen
The rate constraints in this board driver are not modified at runtime, so make them const. While we are at it also remove the unnecessary 0 initializer for the mask field. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: h1940_uda1380: Constify rate constraintsLars-Peter Clausen
The rate constraints in this board driver are not modified at runtime, so make them const. While we are at it also remove the unnecessary 0 initializer for the mask field. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23Merge remote-tracking branches 'asoc/fix/rt298', 'asoc/fix/sx', ↵Mark Brown
'asoc/fix/wm8904' and 'asoc/fix/wm8962' into asoc-linus
2015-10-23ASoC: Intel: Skylake: Convert to devm_snd_soc_register_cardAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: rockchip: i2s: share tx/rx lrck when symmetric_rates enabledSugar Zhang
share lrck_tx to lrck_rx when symmetric_rates enabled. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: rockchip: i2s: add 8 channels capture supportSugar Zhang
support max 8 channels capture, please add property 'rockchip,capture-channels' in dts to enable this, if not, support 2 channels capture default. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: atmel-classd: add the Audio Class D AmplifierSongjun Wu
Add driver for the digital imput to PWM output stereo class D amplifier. It comes with filter, digitally controlled gain, an equalizer and a dmphase filter. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: rt5645: Add dmi "Google Reks" for chromeJohn Lin
Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: fsl-asoc-card: add AC'97 supportMaciej S. Szmigiero
Add AC'97 support to fsl-asoc-card using generic ASoC AC'97 CODEC. The SSI controller will silently enable any TX AC'97 slots that have their bits set in SLOTREQ received from CODEC and then will redirect some of playback samples there. That's why it is important to make sure that any of CODEC playback slots that can pull samples are set to slots 3/4 (standard PCM playback slots). Currently, this applies to S/PDIF slots as they were seen to pull samples sometimes even with S/PDIF output being disabled. Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: nau8825: Show device propertiesBen Zhang
The codec device properties are printed for debugging. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: nau8825: Add FLL configurationBen Zhang
snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-22ASoC: dapm: Add snd_soc_dapm_kcontrol_widget()Mythri P K
Given a kcontrol, we may want to access the parent widget and it's associated data. So export function to return it. Signed-off-by: Mythri P K <mythri.p.k@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-22ASoC: dapm: Add startup & shutdown for dai_linksJeeja KP
For DAI link events, DSPs would like to get notified for startup and shutdown event as well apart for existing hw_params. This helps managing DSP resource allocation and freeup on these events So add support for startup and shutdown for snd_soc_dai_link_event() Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-22ASoC: dapm: Add kcontrol support for PGAsJeeja KP
For DSPs we can define processing blocks as DAPM PGA widgets. Some of these proceesing blocks can be configured by usermode like EQ etc. So we need to add support of kcontrol for PGA widgets. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mythri P K <mythri.p.k@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-22ASoC: Intel: switch from ioremap_cache to memremapDan Williams
In preparation for deprecating ioremap_cache() convert its usage in skl-nhlt to memremap. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-22ASoC: Intel: sst: only use sst-firmware when DW DMAC is availableJie Yang
Currentlly, we use Synopsys DesignWare DMA Controller for baytrail/haswell/broadwell ADSP firmware loading, but for skylake, we don't use it, compiling sst-firmware.c may introduce error when CONFIG_DW_DMAC_CORE is not enabled: sound/built-in.o: In function `sst_dma_new': (.text+0xd7b38): undefined reference to `dw_dma_probe' sound/built-in.o: In function `sst_dma_free': (.text+0xd7c0a): undefined reference to `dw_dma_remove' Here we only compile sst-firmware when CONFIG_DW_DMAC_CORE is selected, to fix the linking error issue. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-22ASoC: wm2000: a couple harmless underflowsDan Carpenter
We want these to be zero or one, but by mistake we also accept negative values. It's harmless but we should still clean it up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 03:49:04 +0000