aboutsummaryrefslogtreecommitdiff
path: root/tools/firewire
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-02tools/firewire: nosy-dump: check for allocation failureStefan Richter
Behavior of null pointer dereference is undefined in the C language. Portably implement the desired behavior. Reported-by: Yang Yeping <yangyeping_666@hotmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-27tools/firewire: nosy-dump: increment program versionStefan Richter
Since version 0.3 from Kristian's repository, there should actually be no change in functionality except for the x86-64 fix. Nevertheless, make it distinct from the original nosy-dump --- just in case and also because of potential future changes. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-27tools/firewire: nosy-dump: remove unused codeStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-27tools/firewire: nosy-dump: use linux/firewire-constants.hStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-27tools/firewire: nosy-dump: break up a deeply nested functionStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-27tools/firewire: nosy-dump: make some symbols static or constStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-27tools/firewire: nosy-dump: change to kernel coding styleStefan Richter
This changes only - whitespace - C99 initializers - comment style - order of #includes - if { } else { } bracing Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-27tools/firewire: nosy-dump: work around segfault in decode_fcpStefan Richter
If I run "nosy-dump --view=transaction" with my camcorder on battery instead of mains, it segfaults very quickly because of !t->request. Perhaps this is because of increased likelyhood of incomplete transactions (ack_busy when host writes to camcorder's FCP_Request) and a bug deeper in nosy-dump's transaction housekeeping. This is a quick workaround to get me going. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-27tools/firewire: nosy-dump: fix it on x86-64Stefan Richter
Replace 'unsigned long' and the (unaffected) 'unsigned int' by uint32_t if they represent quadlets. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-27tools/firewire: add userspace front-end of nosyStefan Richter
This adds nosy-dump, the userspace part of nosy, the IEEE 1394 traffic sniffer for Texas Instruments PCILynx/ PCILynx2 based cards. Author is Kristian Høgsberg. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Parts pertaining to the kernel module removed from Makefile. - dist target removed from the Makefile. - Mentioned nosy-dump in the Kconfig help to nosy's kernel component. - Add copyright notice to nosy-dump.c. This is a duplicate of the respective notice in the kernel component nosy.c except for a time span of 2002 - 2006, according to Kristian's git log. "git shortlog decode-fcp.c list.h nosy-dump.[ch]" from nosy's git repository: Jonathan Woithe (1): Save logs on Ctrl-C Kristian Høgsberg (11): Pull over nosy from mercurial repo. Remove some fields from default view, add logging feature. Use infinite time out for poll(), mark more detail fields. Fix byte ordering macro. Add decoding of iso data and lock packets. Add flag to indicate data length field. Add cycle start packet decoding, add --iso and --cycle-start flags. Distinguish between phy-packets and 0-length iso data. Fix transaction and stats view. Add simple AV/C decoder. Don't break down on big payloads. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>