aboutsummaryrefslogtreecommitdiff
path: root/tools/perf/Makefile
AgeCommit message (Collapse)Author
2018-08-20perf tools: Disable parallelism for 'make clean'Rasmus Villemoes
The Yocto build system does a 'make clean' when rebuilding due to changed dependencies, and that consistently fails for me (causing the whole BSP build to fail) with errors such as | find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory | find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory | find: find: '[...]/perf/1.0-r9/perf-1.0/libtraceevent.a''[...]/perf/1.0-r9/perf-1.0/libtraceevent.a': No such file or directory: No such file or directory | [...] | find: cannot delete '/mnt/xfs/devel/pil/yocto/tmp-glibc/work/wandboard-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/util/.pstack.o.cmd': No such file or directory Apparently (despite the comment), 'make clean' ends up launching multiple sub-makes that all want to remove the same things - perhaps this only happens in combination with a O=... parameter. In any case, we don't lose much by explicitly disabling the parallelism for the clean target, and it makes automated builds much more reliable. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180705131527.19749-1-linux@rasmusvillemoes.dk Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04perf build tests: Do parallell builds with 'build-test'Arnaldo Carvalho de Melo
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-jhmnf9g7y9ryqcjql00unk5y@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-04perf tools: Fix parallel build including 'clean' targetJiri Olsa
Do not parallelize 'clean' with other targets, figure out if it is present and do it first, then the other targets. Noticed with: tools/perf> make -j24 clean all LD arch/libperf-in.o LD plugin_xen-in.o arch//libperf-in.o: file not recognized: File truncated make[3]: *** [arch/libperf-in.o] Error 1 make[2]: *** [arch] Error 2 make[2]: *** Waiting for unfinished jobs.... AR libapi.a Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-kb0qs29zbz7hxn32mc5zbsoz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29perf tools: Speed up build-tests by reducing the number of builds testedArnaldo Carvalho de Melo
The 'tools/perf/test/make' makefile has in its default, 'all' target builds that will pollute the source code directory, i.e. that will not use O= variable. The 'build-test' should be run as often as possible, preferrably after each non strictly non-code commit, so speed it up by selecting just the O= targets. Furthermore it tests both the Makefile.perf file, that is normally driven by the main Makefile, and the Makefile, reduce the time in half by having just MK=Makefile, the most usual, tested by 'build-test'. Please run: make -C tools/perf -f tests/make from time to time for testing also the in-place build tests. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-jrt9utscsiqkmjy3ccufostd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29perf build: Use feature dump file for build-testWang Nan
To prevent the feature check tests to run repeately, one time per 'tests/make' target/test, this patch utilizes the previously introduced 'feature-dump' make target and FEATURES_DUMP variable, making sure that the feature checkers run only once when doing build-test for normal test cases. However, since standard users doesn't reuse features dump result, we'd better give an option to check their behaviors. The above feature should be used to make build-test faster only. Only utilize it for build-test. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1454068269-235999-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-05perf tools: Allow shuffling the build testsArnaldo Carvalho de Melo
Those tests take a long time and sometimes we stop it, so allow randomly shuffling the tests so that we have a better chance of running more of them in partial 'make build-test' runs. Using it just on the 'build-test' target, i.e.: make -C tools/perf build-test Is equivalent to: make SHUF=1 -C tools/perf -f tests/make Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ey7461i9q4k8u0987j8guun6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-22perf build: Fix single target build dependency checkJiri Olsa
Currently if we build a single target like: $ touch util/map.c && make util/map.o It will not rebuild util/map.o if it already exists and util/map.c is modified. The reason is that the top-level 'Makefile' processes util/map.o as an implicit rule and if util/map.o exists make considers the 'util/map.o' target as done and will not nest into Makefile.perf. Adding FORCE for '%', because that's what we want to nest into Makefile.perf for any target. Adding Makefile into phony targets, because make tries to rebuild it and it's also resolved as '%' target. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1434977452-32520-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-04perf tools: Use getconf to determine number of online CPUsWill Deacon
Parsing /proc/cpuinfo is a fiddly, arch-dependent business and a recent change to get it working for Sparc broke arm and arm64 platforms. Use sysconf to determine the number of online CPUs only parsing /proc/cpuinfo when sysconf is not available. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Mark Rutland <Mark.Rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20150423140454.GJ1652@arm.com [ Made it fall back to parsing /proc when getconf not found ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-26perf tools: Set JOBS based on CPU or processorDavid Ahern
Number of JOBS to use is set automatically to the number of processors found in /proc/cpuinfo. SPARC uses 'CPU' lines rather than 'processor'. Update the check in perf's Makefile to work for SPARC. Signed-off-by: David Ahern <david.ahern@oracle.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1427213455-127249-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-02perf tools: Compare JOBS to 0 after grepDavid Ahern
If JOBS is not by user perf tries to autodetect the number by grepping the number of CPUs from /proc/cpuinfo. 'grep -c' will always return an integer so after this command JOBS should be compared to 0, not "". Signed-off-by: David Ahern <david.ahern@oracle.com> Link: http://lkml.kernel.org/r/1424303971-91904-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-16perf tools: Add 'build-test' make targetNamhyung Kim
Currently various build test can be performed using a Makefile named tests/make, so one needs to remember and specify it with -f option on command line. Add the 'build-test' target in the main Makefile as a shortcut. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1389837173-3632-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-27perf tools: Fix tags/TAGS targets rebuildingJiri Olsa
Once the tags/TAGS file is generated it's never rebuilt until it's removed by hand. The reason is that the Makefile does not treat tags/TAGS as targets but as files and thus won't rebuilt them once they are in place. Adding PHONY tags/TAGS targets into Makefile. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20131126125412.GJ1267@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14tools/perf/build: Pass through DEBUG parameterIngo Molnar
Arnaldo reported that 'make DEBUG=1' does not work anymore. The reason is that 'Makefile' only passes it through to 'Makefile.perf' via the environment, but 'Makefile.perf' checks that it's a command line option: ifeq ("$(origin DEBUG)", "command line") PERF_DEBUG = $(DEBUG) endif So pass it through properly, and also clean up DEBUG parameter handling while at it and fix a couple of annoyances: - DEBUG=0 used to be interpreted as 'debugging on'. Turn it into 'debugging off' instead. - Same was the case for 'DEBUG=' - turn that into debug-off as well. - Pass in just a clean, sanitized 'DEBUG' value and get rid of the intermediate, unnecessary PERF_DEBUG variable. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14tools/perf/build: Fix non-existent build directory handlingIngo Molnar
Arnaldo reported that non-existent build directories were not recognized properly. The reason is readlink failure causing 'O' to become empty. Solve it by passing through the 'O' variable unmodified if readlink fails. Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20131009150023.GA10167@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11tools: Harmonize the various build messages in perf, lib-traceevent, lib-lkIngo Molnar
The various build lines from libtraceevent and perf mix up during a parallel build and produce unaligned output like: CC builtin-buildid-list.o CC builtin-buildid-cache.o CC builtin-list.o CC FPIC trace-seq.o CC builtin-record.o CC FPIC parse-filter.o CC builtin-report.o CC builtin-stat.o CC FPIC parse-utils.o CC FPIC kbuffer-parse.o CC builtin-timechart.o CC builtin-top.o CC builtin-script.o BUILD STATIC LIB libtraceevent.a CC builtin-probe.o CC builtin-kmem.o CC builtin-lock.o To solve this, harmonize all the build message alignments to be similar to the kernel's kbuild output: prefixed by two spaces and 11-char wide. After the patch the output looks pretty tidy, even if output lines get mixed up: CC builtin-annotate.o FLAGS: * new build flags or cross compiler CC builtin-bench.o AR liblk.a CC bench/sched-messaging.o CC FPIC event-parse.o CC bench/sched-pipe.o CC FPIC trace-seq.o CC bench/mem-memcpy.o CC bench/mem-memset.o CC FPIC parse-filter.o CC builtin-diff.o CC builtin-evlist.o CC builtin-help.o Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1381312169-17354-3-git-send-email-mingo@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-09tools/perf/build: Fix non-canonical directory names in O=Ingo Molnar
This was a long-standing bug, relative pathnames like O=dir did not fully work in the build system: $ make O=localdir clean SUBDIR Documentation ../../scripts/Makefile.include:3: *** O=localdir does not exist. Stop. make[1]: *** [clean] Error 2 make: *** [clean] Error 2 Fix this by canonizing the directory before passing it to Makefile.perf. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-hchMp1hozn9tqgswWcooxcru@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09tools/perf/build: Exclude MAKEFLAGS from nested invocationIngo Molnar
In case the user specifies MAKEFLAGS as an environment variable, or uses 'make -jN' explicitly, the options can conflict and result in: BUILD: Doing 'make -j8' parallel build make[1]: warning: -jN forced in submake: disabling jobserver mode. GEN common-cmds.h make[1]: *** write jobserver: Bad file descriptor. Stop. Make sure we invoke the main makefile in a pristine state. Users who want to do something non-standard can use the: make -f Makefile.perf method to invoke the makefile. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-uen6hzTvkqqngqwjma9yoEgw@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09tools/perf/build: Pass through all targets to Makefile.perfIngo Molnar
Jiri reported that 'make .o' stopped working: > [jolsa@krava perf]$ make -f Makefile perf.o > cc -c -o perf.o perf.c > In file included from builtin.h:4:0, > from perf.c:9: > util/util.h:74:24: fatal error: lk/debugfs.h: No such file or directory > compilation terminated. > make: *** [perf.o] Error 1 This is due to GNU make having built-in rules for popular targets such as *.o. Clear them out so that all targets as passed through to Makefile.perf. Reported-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/n/tip-5wkuvmlaaxtfgepKcvRij8sh@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09tools/perf/build: Standardize the various messages output by parallel makeIngo Molnar
Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-mky0rtpwxi3ivxsvdjoOEmhr@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09tools/perf/build: Flip Makefile.parallel and Makefile.perfIngo Molnar
To make it more apparent that there is not change in functionality we introduced Makefile.parallel separately and now flip it with the main Makefile, which moves into Makefile.perf. The renames are: Makefile.parallel => Makefile Makefile => Makefile.perf Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-igRfuw9ugbnnpixLd6wpptzl@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09tools/perf/build: Invoke feature-checks 'clean' target from the main MakefileIngo Molnar
config/Makefile is not included for the 'clean' target, so invoke the config/feature-checks/Makefile 'clean' target from Makefile.perf. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-sh2cGvmsjbrazarlqre7pVwt@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09tools/perf/build: Speed up the final linkIngo Molnar
libtraceevent.a and liblk.a rules have always-missed dependencies, which causes python.so to be relinked at every build attempt - even if none of the affected code changes. This slows down re-builds unnecessarily, by adding more than a second to the build time: comet:~/tip/tools/perf> time make ... SUBDIR /fast/mingo/tip/tools/lib/lk/ make[1]: `liblk.a' is up to date. SUBDIR /fast/mingo/tip/tools/lib/traceevent/ LINK perf GEN python/perf.so real 0m1.701s user 0m1.338s sys 0m0.301s Add the (trivial) dependencies to not force a re-link. This speeds up an empty re-build enormously: comet:~/tip/tools/perf> time make ... real 0m0.207s user 0m0.134s sys 0m0.028s [ This adds some coupling between the build dependencies of libtraceevent and liblk - but until those stay relatively simple this should not be an issue. ] Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-wvmlrurufuk6mo1ovtNigguT@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09tools/perf/build: Speed up git-version test on re-makeIngo Molnar
util/PERF-VERSION-GEN is currently executed on every build attempt, and this script can take a lot of time on trees that are at a significant git-distance from Linus's tree: $ time util/PERF-VERSION-GEN real 0m4.343s user 0m4.176s sys 0m0.140s It also takes a lot of time if the Git repository is network attached, etc., because the commands it uses: TAG=$(git describe --abbrev=0 --match "v[0-9].[0-9]*" 2>/dev/null ) has to count commits from the nearest tag and thus has to access (and decompress) every git commit blob on the relevant version path. Even on Linus's tree it takes 0.28 seconds on a fast box to count all the commits and get the git version string: $ time util/PERF-VERSION-GEN real 0m0.279s user 0m0.247s sys 0m0.025s But the version string only has to be regenerated if the git repository's head commit changes. So add a dependency of ../../.git/HEAD and touch the file every time it's regenerated, so that Make's build rules can pick it up and cache the result: make: `PERF-VERSION-FILE' is up to date. real 0m0.184s user 0m0.117s sys 0m0.026s Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-wvmlrurufuk6mo1ovtNigguT@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-04perf tools: Fix installation of libexec componentsArnaldo Carvalho de Melo
Doing a fresh install on a user home directory needs to first make sure that the ~/libexec/perf-core/ directory is present so that 'perf-archive' like scripts, 'perf test' attr config files and 'perf script' scripts can be installed. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-z7ryi3r1b9dn9smbfnab0fdc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-09-05perf tools: Add test for parsing with no sample_id_all bitAdrian Hunter
Add a test for parsing a non-sample event when there is more than one selected event but no sample_id_all bit set. The test fails because of a bug in the evlist logic. That is fixed in a separate patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1378325897-3840-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-09-02perf tests: Add 'keep tracking' testAdrian Hunter
Add a test for the newly added PERF_COUNT_SW_DUMMY event. The test checks that tracking events continue when an event is disabled but a dummy software event is not disabled. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1377975053-3811-4-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-29perf tests: Add a sample parsing testAdrian Hunter
Add a test that checks that sample parsing is correctly implemented. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1377591794-30553-12-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-29perf evlist: Move perf_evlist__config() to a new source fileAdrian Hunter
perf_evlist__config() must be moved to a separate source file to avoid Python link errors when adding support for PERF_SAMPLE_IDENTIFIER. It is appropriate to do this because perf_evlist__config() is a helper function for event recording. It is used by tools to apply recording options to perf_evlist. It is not used by the Python API. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1377591794-30553-7-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf tools: Don't install scripting files files when disabledArnaldo Carvalho de Melo
No need to install perl or python files when the respective NO_LIBP{YTHON,ERL} define is set. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-c69d4jz08gb1zm2vpervva2q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-07perf tests: Add test for reading object codeAdrian Hunter
Using the information in mmap events, perf tools can read object code associated with sampled addresses. A test is added that compares bytes read by perf with the same bytes read using objdump. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1375875537-4509-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-07-23perf tools: Add test for converting perf time to/from TSCAdrian Hunter
The test uses the newly added cap_usr_time_zero and time_zero of perf_event_mmap_page. TSC from rdtsc is compared with the time from 2 perf events. The test passes if the calculated times are all in the correct order. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1372425741-1676-4-git-send-email-adrian.hunter@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-22perf tools: Fix build with perl 5.18Kirill A. Shutemov
perl.h from new Perl release doesn't like -Wundef and -Wswitch-default: /usr/lib/perl5/core_perl/CORE/perl.h:548:5: error: "SILENT_NO_TAINT_SUPPORT" is not defined [-Werror=undef] #if SILENT_NO_TAINT_SUPPORT && !defined(NO_TAINT_SUPPORT) ^ /usr/lib/perl5/core_perl/CORE/perl.h:556:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef] #if NO_TAINT_SUPPORT ^ In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3471:0, from util/scripting-engines/trace-event-perl.c:30: /usr/lib/perl5/core_perl/CORE/sv.h:1455:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef] #if NO_TAINT_SUPPORT ^ In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3472:0, from util/scripting-engines/trace-event-perl.c:30: /usr/lib/perl5/core_perl/CORE/regexp.h:436:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef] #if NO_TAINT_SUPPORT ^ In file included from /usr/lib/perl5/core_perl/CORE/hv.h:592:0, from /usr/lib/perl5/core_perl/CORE/perl.h:3480, from util/scripting-engines/trace-event-perl.c:30: /usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_siphash_2_4’: /usr/lib/perl5/core_perl/CORE/hv_func.h:222:3: error: switch missing default case [-Werror=switch-default] switch( left ) ^ /usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_superfast’: /usr/lib/perl5/core_perl/CORE/hv_func.h:274:5: error: switch missing default case [-Werror=switch-default] switch (rem) { \ ^ /usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_murmur3’: /usr/lib/perl5/core_perl/CORE/hv_func.h:398:5: error: switch missing default case [-Werror=switch-default] switch(bytes_in_carry) { /* how many bytes in carry */ ^ Let's disable the warnings for code which uses perl.h. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1372063394-20126-1-git-send-email-kirill@shutemov.name Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-07-17perf tools: Fix 'make tools/perf'Robert Richter
Boris just raised another variant of building perf tools which is broken: $ make tools/perf ... LINK /home/robert/cx/linux/tools/perf/perf gcc: error: ../linux/tools/lib/lk/liblk.a: No such file or directory The variant wasn't considered by: 107de37 perf tools: Fix build errors with O and DESTDIR make vars set There are other variant of building perf too: $ make -C tools perf $ make -C tools/perf Plus variants with O= and DESTDIR set. This patch fixes the above and was tested with the following: $ make O=... DESTDIR=... tools/perf $ make O=... DESTDIR=... -C tools/ perf $ make O=... DESTDIR=... -C tools/perf $ make tools/perf $ make -C tools/ perf $ make -C tools/perf Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Robert Richter <robert.richter@linaro.org> Signed-off-by: Robert Richter <rric@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-tip-commits@vger.kernel.org Link: http://lkml.kernel.org/r/20130716145036.GH8731@rric.localhost Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-07-12perf tools: Use default include path notation for libtraceevent headersRobert Richter
Header files of libtraceevent or no longer local headers. Thus, use default path notation for them. Also removing extra traceevent include path and instead handle this similar to liblk. Signed-off-by: Robert Richter <robert.richter@linaro.org> Signed-off-by: Robert Richter <rric@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Robert Richter <rric@kernel.org> Link: http://lkml.kernel.org/r/1370964558-8599-1-git-send-email-rric@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-07-08perf tools: Fix build errors with O and DESTDIR make vars setRobert Richter
Fixing build errors with O and DESTDIR make vars set: $ make prefix=/usr/local O=$builddir DESTDIR=$destdir -C tools/ perf ... make[1]: Entering directory `.../.source/perf/tools/perf' CC .../.build/perf/perf/util/parse-events.o util/parse-events.c:14:32: fatal error: parse-events-bison.h: No such file or directory compilation terminated. make[1]: *** [.../.build/perf/perf/util/parse-events.o] Error 1 ... and: LINK /.../.build/perf/perf/perf gcc: error: /.../.build/perf/perf//.../.source/perf/tools/lib/lk/liblk.a: No such file or directory Signed-off-by: Robert Richter <robert.richter@linaro.org> Signed-off-by: Robert Richter <rric@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Robert Richter <rric@kernel.org> Link: http://lkml.kernel.org/r/1370964158-4135-1-git-send-email-rric@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-30perf tools: Add missing liblk.a dependency for python/perf.soJiri Olsa
Adding missing liblk.a dependency for python/perf.so. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-26-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-30perf tools: Remove '?=' Makefile STRIP assignmentJiri Olsa
No need to use '?=' assignment for STRIP variable, the standard '=' does the same job without creating confusion. Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Stephane Eranian <eranian@google.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: http://lkml.kernel.org/r/1369398928-9809-25-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-30perf tools: Replace tabs with spaces for all non-commands statementsJiri Olsa
Replacing tabs with spaces for all non-commands statements in 'Makefile' and 'config/Makefile' files. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-23-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-30perf tools: Add NO_BIONIC variable to confiure bionic setupJiri Olsa
Adding NO_BIONIC variable to confiure bionic setup Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-22-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-30perf tools: Switch to full path C include directoriesJiri Olsa
Switching to full path C include directories, to make the includes clear. Plus little include cleanup. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-21-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-30perf tools: Merge all *LDFLAGS* make variable into LDFLAGSJiri Olsa
Merging all *LDFLAGS* make variable into LDFLAGS to eliminate all special *LDFLAGS* variables and make the setup clear. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-20-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-30perf tools: Merge all *CFLAGS* make variable into CFLAGSJiri Olsa
Merging all *CFLAGS* make variable into CFLAGS to eliminate all special *_CFLAGS_* variables and make the setup clear. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-19-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-29perf tools: Final touches for CHK config moveJiri Olsa
Removing no longer needed ifdefs. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-18-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-29perf tools: Move paths config into config/MakefileJiri Olsa
Moving paths config into config/Makefile. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-17-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-29perf tools: Move libnuma check config into config/MakefileJiri Olsa
Moving libnuma check config into config/Makefile Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-16-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-29perf tools: Move stdlib check config into config/MakefileJiri Olsa
Moving stdlib check config into config/Makefile. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-15-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-29perf tools: Move libbfd check config into config/MakefileJiri Olsa
Moving libbfd check config into config/Makefile. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-14-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-29perf tools: Move libpython check config into config/MakefileJiri Olsa
Moving libpython check config into config/Makefile. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-13-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-29perf tools: Move libperl check config into config/MakefileJiri Olsa
Moving libperl check config into config/Makefile. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1369398928-9809-12-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>