aboutsummaryrefslogtreecommitdiff
path: root/tools/perf/builtin-report.c
AgeCommit message (Collapse)Author
2009-08-13perf report: Don't show unresolved DSOs and symbols when -S/-d is usedArnaldo Carvalho de Melo
We're interested in just those symbols/DSOs, so filter out the unresolved ones. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20090812211957.GE3495@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-12perf report: Show the tid too in -DArnaldo Carvalho de Melo
This made it easier to find the firefox threading related bug. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090811192138.GE18061@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf tools: callchain: Fix sum of percentages to be 100% by displaying ↵Frederic Weisbecker
amount of ignored chains in fractal mode When we filter the callchains below a given percentage, we ignore them and the end result only shows entries that have an upper percentage than the filter threshold. It seems to users then that we have an imbalance in the percentage, as if the sum inside a profiled branch doesn't reach 100%. Since in the past there have been real perf report bugs that showed the same sypmtom, it would be nice to assure the user that the data is perfect and trustable and it all sums up to 100.00%. So fix this by displaying the remaining hits that have been filtered but without more detail than their amount in each branches. Example while filtering below 50%: 7.73% [k] delay_tsc | |--98.22%-- __const_udelay | | | |--86.37%-- ath5k_hw_register_timeout | | ath5k_hw_noise_floor_calibration | | ath5k_hw_reset | | ath5k_reset | | ath5k_config | | ieee80211_hw_config | | | | | |--88.53%-- ieee80211_scan_work | | | worker_thread | | | kthread | | | child_rip | | --11.47%-- [...] | --13.63%-- [...] --1.78%-- [...] Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1249690585-9145-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf tools: callchain: Fix 'perf report' display to be callchain by defaultFrederic Weisbecker
If we recorded with -g option to record the callchain, right now we require a -g option to perf report as well - and people reported this as unnecessary complication: the user already specified -g once, no need to require it a second time. So if the recording includes call-chains, display the callchain by default from perf report. ( The user can override this default using "-g none" option from perf report. ) Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1249690585-9145-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf report: Add debug help for the finding of symbol bugs - show the symtab ↵Arnaldo Carvalho de Melo
origin (DSO, build-id, kernel, etc) Used with perf report --verbose: [acme@doppio linux-2.6-tip]$ perf report -v | head -16 5.17% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005d8eee f [.] imgContainer::DrawFrameTo(gfxIImageFrame*, gfxIImageFrame*, nsRect&) 2.56% firefox /lib64/libpthread-2.10.1.so 0x0000000000008e02 d [.] __pthread_mutex_lock_internal 1.94% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x0000000000d0af8f f [.] SearchTable 1.75% firefox [kernel] 0xffffffffff60013b k [.] vread_hpet 1.63% firefox /lib64/libpthread-2.10.1.so 0x000000000000a404 d [.] __pthread_mutex_unlock 1.47% firefox /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000482ea f [.] js_Interpret 1.42% firefox /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x000000000003eda3 f [.] JS_CallTracer 1.24% firefox [kernel] 0xffffffff8102ca4a k [k] read_hpet 1.16% firefox [kernel] 0xffffffff810f3dd4 k [k] fget_light 1.11% firefox /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000567ff f [.] js_TraceObject 0.98% firefox /usr/lib64/firefox-3.5.2/firefox 0x000000000000dd23 b [.] arena_ralloc [acme@doppio linux-2.6-tip]$ The new field is just after the symbol address. To help in figuring out symbol resolution bugs. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf report: Fix per task mult-counter stat reportingPeter Zijlstra
Brice Goglin reported: > I can easily sort them by thread id, but I don't know how to match > my 4 events with each group of 4 lines. Also report the counter id and the time running/enabled stats (in case the counter got time-shared). Reported-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf tools: Fix call-chain cumul hit based sub-total (fractal mode)Frederic Weisbecker
The callchain fractal mode builds each new total hits in a new branch of profiling by using the parent's hits of the current branch plus the hits of the children. This is wrong, the total hits of a branch should be made of the sum of every children hits, we must ignore the parent hits in this scope. This patch also fixes another mistake with the hit counting. Now the rates are correct. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-05perf report: Make --sort comm,dso,symbol the defaultPekka Enberg
If you're doing performance testing, you're interested in the symbols anyway so lets make "--sort comm,dso,symbol" the default sort option. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com LKML-Reference: <1249467921-10450-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04perf: Fix read buffer overflowRoel Kluin
Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: a.p.zijlstra@chello.nl Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A757BCF.40101@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02perf report: Update for the new FORK/EXIT eventsPeter Zijlstra
Since FORK is now also issued for threads, detect those by comparing the parent and child PID. Teach it about EXIT events and ignore them. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22perf_counter: PERF_SAMPLE_ID and inherited countersPeter Zijlstra
Anton noted that for inherited counters the counter-id as provided by PERF_SAMPLE_ID isn't mappable to the id found through PERF_RECORD_ID because each inherited counter gets its own id. His suggestion was to always return the parent counter id, since that is the primary counter id as exposed. However, these inherited counters have a unique identifier so that events like PERF_EVENT_PERIOD and PERF_EVENT_THROTTLE can be specific about which counter gets modified, which is important when trying to normalize the sample streams. This patch removes PERF_EVENT_PERIOD in favour of PERF_SAMPLE_PERIOD, which is more useful anyway, since changing periods became a lot more common than initially thought -- rendering PERF_EVENT_PERIOD the less useful solution (also, PERF_SAMPLE_PERIOD reports the more accurate value, since it reports the value used to trigger the overflow, whereas PERF_EVENT_PERIOD simply reports the requested period changed, which might only take effect on the next cycle). This still leaves us PERF_EVENT_THROTTLE to consider, but since that _should_ be a rare occurrence, and linking it to a primary id is the most useful bit to diagnose the problem, we introduce a PERF_SAMPLE_STREAM_ID, for those few cases where the full reconstruction is important. [Does change the ABI a little, but I see no other way out] Suggested-by: Anton Blanchard <anton@samba.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1248095846.15751.8781.camel@twins>
2009-07-22Merge commit 'tip/perfcounters/core' into perf-counters-for-linusPeter Zijlstra
2009-07-18perf_counter: Make call graph option consistentAnton Blanchard
perf record uses -g for logging call graph data but perf report uses -c to print call graph data. Be consistent and use -g everywhere for call graph data. Also update the help text to reflect the current default - fractal,0.5 Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090716104817.803604373@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11perf report: Introduce -n/--show-nr-samplesArnaldo Carvalho de Melo
[acme@doppio pahole]$ perf report -ns comm,dso,symbol -d /lib64/libc-2.10.1.so -C pahole | head -17 21.94% 32101 [.] _int_malloc 20.10% 29402 [.] __GI_strcmp 16.77% 24533 [.] __tsearch 12.61% 18450 [.] malloc_consolidate 6.42% 9394 [.] _int_free 6.28% 9191 [.] __tfind 4.56% 6678 [.] __GI___libc_free 4.46% 6520 [.] _IO_vfprintf_internal 2.59% 3786 [.] __malloc 1.17% 1716 [.] __GI_memcpy [acme@doppio pahole]$ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1247325517-12272-5-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11perf report: Make the output more compactArnaldo Carvalho de Melo
When we filter by column content we may end up with a column that has the same value for all the lines. So remove that column and tell its unique value on the top, as a comment. Example: [acme@doppio pahole]$ perf report --sort comm,dso,symbol -d ./build/libdwarves.so.1.0.0 -C pahole | head -15 # dso: ./build/libdwarves.so.1.0.0 # comm: pahole # Samples: 58409 # # Overhead Symbol # ........ ...... # 20.93% [.] tag__recode_dwarf_type 14.94% [.] namespace__recode_dwarf_types 10.38% [.] cu__table_add_tag 6.69% [.] __die__process_tag 5.05% [.] die__process_function 4.70% [.] list__for_all_tags 3.68% [.] tag__init 3.48% [.] die__create_new_parameter [acme@doppio pahole]$ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1247325517-12272-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11perf report: Tidy up reporting of symbols not foundArnaldo Carvalho de Melo
Always printing the level info about if it is in the kernel, hypervisor or userspace as that is in the hist_entry. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1247325517-12272-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11perf report: Adjust column width to the values sampledArnaldo Carvalho de Melo
Auto-adjust column width of perf report output to the longest occuring string length. Example: [acme@doppio pahole]$ perf report --sort comm,dso,symbol | head -13 12.79% pahole /usr/lib64/libdw-0.141.so [.] __libdw_find_attr 8.90% pahole /lib64/libc-2.10.1.so [.] _int_malloc 8.68% pahole /usr/lib64/libdw-0.141.so [.] __libdw_form_val_len 8.15% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp 6.80% pahole /lib64/libc-2.10.1.so [.] __tsearch 5.54% pahole ./build/libdwarves.so.1.0.0 [.] tag__recode_dwarf_type [acme@doppio pahole]$ [acme@doppio pahole]$ perf report --sort comm,dso,symbol -d /lib64/libc-2.10.1.so | head -10 21.92% pahole /lib64/libc-2.10.1.so [.] _int_malloc 20.08% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp 16.75% pahole /lib64/libc-2.10.1.so [.] __tsearch [acme@doppio pahole]$ Also add these extra options to control the new behaviour: -w, --field-width Force each column width to the provided list, for large terminal readability. -t, --field-separator: Use a special separator character and don't pad with spaces, replacing all occurances of this separator in symbol names (and other output) with a '.' character, that thus it's the only non valid separator. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090711014728.GH3452@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-05perf report: Add "Fractal" mode output - support callchains with relative ↵Frederic Weisbecker
overhead rate The current callchain displays the overhead rates as absolute: relative to the total overhead. This patch provides relative overhead percentage, in which each branch of the callchain tree is a independant instrumentated object. This provides a 'fractal' view of the call-chain profile: each sub-graph looks like a profile in itself - relative to its parent. You can produce such output by using the "fractal" mode that you can abbreviate via f, fr, fra, frac, etc... ./perf report -s sym -c fractal Example: 8.46% [k] copy_user_generic_string | |--52.01%-- generic_file_aio_read | do_sync_read | vfs_read | | | |--97.20%-- sys_pread64 | | system_call_fastpath | | pread64 | | | --2.81%-- sys_read | system_call_fastpath | __read | |--39.85%-- generic_file_buffered_write | __generic_file_aio_write_nolock | generic_file_aio_write | do_sync_write | reiserfs_file_write | vfs_write | | | |--97.05%-- sys_pwrite64 | | system_call_fastpath | | __pwrite64 | | | --2.95%-- sys_write | system_call_fastpath | __write_nocancel [...] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246772361-9960-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-05perf report: Change default callchain parametersFrederic Weisbecker
The default callchain parameters are set to use the flat mode and never filter any overhead threshold of backtrace. But flat mode is boring compared to graph mode. Also the number of callchains may be very high if none is filtered. Let's change this to set the graph view and a minimum overhead of 0.5% as default parameters. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246772361-9960-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-05perf report: Use a modifiable string for default callchain optionsFrederic Weisbecker
If the user doesn't provide options to tune his callchain output (ie: if he uses -c without arguments) then the default value passed in the OPT_CALLBACK_DEFAULT() macro is used. But it's parsed later by strtok() which will replace comma separators to a zero. This may segfault as we are using a read-only string. Use a modifiable one instead, and also fix the "100%" default minimum threshold value by turning it into a 0 (output every callchains) as it was intended in the origin. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246772361-9960-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-05perf report: Warn on callchain output request from non-callchain fileFrederic Weisbecker
perf report segfaults while trying to handle callchains from a non callchain data file. Instead of a segfault, print a useful message to the user. Reported-by: Jens Axboe <jens.axboe@oracle.com> Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246772361-9960-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-03perf report: Annotate variable initializationIngo Molnar
Certain versions of GCC dont see the initialization that is done here: builtin-report.c: In function ‘__cmd_report’: builtin-report.c:1038: warning: ‘syms’ may be used uninitialized in this function So annotate it with a NULL initialization. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02perf_counter tools: Display percents of hits in callchain with overhead colorsFrederic Weisbecker
This adds the use of colors to signal at a glance the important overhead thresholds in callchains hit rates. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246558475-10624-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02perf_counter tools: Provide helper to print percents colorFrederic Weisbecker
Among perf annotate, perf report and perf top, we can find the common colored printing of percents according to the following rules: High overhead = > 5%, colored in red Mid overhead = > 0.5%, colored in green Low overhead = < 0.5%, default color Factorize these multiple checks in a single function named percent_color_fprintf() and also provide a get_percent_color() for sites which print percentages and other things at the same time. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246558475-10624-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02perf_counter tools: Set the minimum percent for callchains to be displayedFrederic Weisbecker
Callchains output may become a burden on a trace because even rarely hit site are exposed. This can be too much information. Let the user set a threshold as a minimum percent of hits using the new pattern for the -c option: -c mode,min_percent Example: $ perf report -s sym -c flat,4 8.25% [k] copy_user_generic_string 4.19% copy_user_generic_string generic_file_aio_read do_sync_read vfs_read sys_pread64 system_call_fastpath pread64 5.39% [k] search_by_key 4.63% 0x00000000009e0a 2.36% [k] memcpy_c [...] $ perf report -s sym -c graph,2 8.25% [k] copy_user_generic_string | |--4.31%-- generic_file_aio_read | do_sync_read | vfs_read | | | --4.19%-- sys_pread64 | system_call_fastpath | pread64 | --3.24%-- generic_file_buffered_write __generic_file_aio_write_nolock generic_file_aio_write do_sync_write reiserfs_file_write vfs_write | --3.14%-- sys_pwrite64 system_call_fastpath __pwrite64 5.39% [k] search_by_key | --2.23%-- reiserfs_update_sd_size 4.63% 0x00000000009e0a 2.36% [k] memcpy_c [...] You can also omit it and it will default to 0. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246558475-10624-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02perf report: Add support for callchain graph outputFrederic Weisbecker
Currently, the printing of callchains is done in a single vertical level, this is the "flat" mode: 8.25% [k] copy_user_generic_string 4.19% copy_user_generic_string generic_file_aio_read do_sync_read vfs_read sys_pread64 system_call_fastpath pread64 This patch introduces a new "graph" mode which provides a hierarchical output of factorized paths recursively sorted: 8.25% [k] copy_user_generic_string | |--4.31%-- generic_file_aio_read | do_sync_read | vfs_read | | | |--4.19%-- sys_pread64 | | system_call_fastpath | | pread64 | | | --0.12%-- sys_read | system_call_fastpath | __read | |--3.24%-- generic_file_buffered_write | __generic_file_aio_write_nolock | generic_file_aio_write | do_sync_write | reiserfs_file_write | vfs_write | | | |--3.14%-- sys_pwrite64 | | system_call_fastpath | | __pwrite64 | | | --0.10%-- sys_write [...] The command line has then changed. By providing the -c option, the callchain will output in the flat mode by default. But you can override it: perf report -c graph or perf report -c flat You can also pass the abreviated mode: perf report -c g or perf report -c gra will both make use of the graph mode. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246550301-8954-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02perf_counter tools: Enable kernel module symbol loading in toolsMike Galbraith
Add the -m/--modules option to perf report and perf annotate, which enables live module symbol/image loading. To be used with -k/--vmlinux. (Also give perf annotate a -P/--full-paths option.) Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246514986.13293.48.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02perf_counter tools: Connect module support infrastructure to symbol loading ↵Mike Galbraith
infrastructure Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246514916.13293.46.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02perf_counter tools: Make symbol loading consistently return number of loaded ↵Mike Galbraith
symbols perf_counter tools: Make symbol loading consistently return number of loaded symbols. Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246514758.13293.42.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf_counter tools: Share list.h with the kernelArnaldo Carvalho de Melo
The copy we were using came from another copy I did for the dwarves (pahole) package, that came from the kernel years ago. The only function that is used by the perf tools and that isn't in the kernel is list_del_range, that I'm leaving in the perf tools only for now. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090701174608.GA5823@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf_counter tools: Share rbtree.with the kernelArnaldo Carvalho de Melo
The tools/perf/util/rbtree.c copy already drifted by three csets: 4b324126e0c6c3a5080ca3ec0981e8766ed6f1ee 4c60117811171d867d4f27f17ea07d7419d45dae 16c047add3ceaf0ab882e3e094d1ec904d02312d So remove the copy and use the lib/rbtree.c directly, sharing the source code while still generating a separate object file, since tools/perf uses a far more agressive -O6 switch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090701152837.GG15682@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf_counter tools: Add more warnings and fix/annotate themIngo Molnar
Enable -Wextra. This found a few real bugs plus a number of signed/unsigned type mismatches/uncleanlinesses. It also required a few annotations All things considered it was still worth it so lets try with this enabled for now. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf report: Fix HV bit mismergeIngo Molnar
Fix: builtin-report.c: In function ‘hist_entry__add’: builtin-report.c:1015: error: case label not within a switch statement builtin-report.c:1017: error: break statement not within loop or switch Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf_counter tools: Resolve symbols in callchainsFrederic Weisbecker
This patch resolves the names, when possible, of each ip present in the callchains while using the -c option with perf report. Example: 5.40% [k] __d_lookup 5.37% perf_callchain perf_counter_overflow intel_pmu_handle_irq perf_counter_nmi_handler notifier_call_chain atomic_notifier_call_chain notify_die do_nmi nmi do_lookup __link_path_walk path_walk do_path_lookup user_path_at sys_faccessat sys_access system_call_fastpath 0x7fb609846f77 0.01% perf_callchain perf_counter_overflow intel_pmu_handle_irq perf_counter_nmi_handler notifier_call_chain atomic_notifier_call_chain notify_die do_nmi nmi do_lookup __link_path_walk path_walk do_path_lookup user_path_at sys_faccessat Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246419315-9968-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf report: Add hypervisor dsoAnton Blanchard
Add a dso for hypervisor samples. We don't get any symbol information on the ppc64 hypervisor but this at least gives us a high level summary of the time spent in there. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org LKML-Reference: <20090630230141.182536873@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf report: Fix reporting of hypervisorAnton Blanchard
PERF_EVENT_MISC_* is not a bitmask, so we have to mask and compare. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org LKML-Reference: <20090630230141.088394681@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf report: Add --symbols parameterArnaldo Carvalho de Melo
So that we can filter by symbol name. The 'pfunct' utility in the 'dwarves' package can be used to create a file with the functions one wants. Example: [acme@doppio pahole]$ pfunct /usr/lib/debug/usr/lib64/libdw-0.141.so.debug | grep dwarf > /tmp/dwarf.symbols [acme@doppio pahole]$ wc -l /tmp/dwarf.symbols 93 /tmp/dwarf.symbols [acme@doppio pahole]$ head -3 /tmp/dwarf.symbols dwfl_addrdwarf dwfl_module_getdwarf dwfl_getdwarf [acme@doppio pahole]$ perf report --sort comm,dso,symbol --comms pahole --dsos /usr/lib64/libdw-0.141.so --symbols file:///tmp/dwarf.symbols 33.99% pahole /usr/lib64/libdw-0.141.so [.] dwarf_tag 29.07% pahole /usr/lib64/libdw-0.141.so [.] dwarf_decl_file 27.71% pahole /usr/lib64/libdw-0.141.so [.] dwarf_getsrclines 4.54% pahole /usr/lib64/libdw-0.141.so 0x00000000007400 3.93% pahole /usr/lib64/libdw-0.141.so [.] dwarf_decl_line 0.46% pahole /usr/lib64/libdw-0.141.so [.] dwarf_getlocation 0.18% pahole /usr/lib64/libdw-0.141.so [.] __libdwarf_next_prime 0.13% pahole /usr/lib64/libdw-0.141.so [.] dwarf_diecu [acme@doppio pahole]$ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1246399282-20934-4-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf report: Add --comms parameterArnaldo Carvalho de Melo
So that we can filter by comm. Symbols in other comms won't be accounted for. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1246399282-20934-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf report: Add --dsos parameterArnaldo Carvalho de Melo
So that we can filter by dso. Symbols in other dsos won't be accounted for. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1246399282-20934-2-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-26perf report: Print sorted callchains per histogram entriesFrederic Weisbecker
Use the newly created callchains radix tree to gather the chains stats from the recorded events and then print the callchains for all of them, sorted by hits, using the "-c" parameter with perf report. Example: 66.15% [k] atm_clip_exit 63.08% 0xffffffffffffff80 0xffffffff810196a8 0xffffffff810c14c8 0xffffffff8101a79c 0xffffffff810194f3 0xffffffff8106ab7f 0xffffffff8106abe5 0xffffffff8106acde 0xffffffff8100d94b 0xffffffff8153e7ea [...] 1.54% 0xffffffffffffff80 0xffffffff810196a8 0xffffffff810c14c8 0xffffffff8101a79c [...] Symbols are not yet resolved. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1246026481-8314-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-26perf_counter tools: Prepare a small callchain frameworkFrederic Weisbecker
We plan to display the callchains depending on some user-configurable parameters. To gather the callchains stats from the recorded stream in a fast way, this patch introduces an ad hoc radix tree adapted for callchains and also a rbtree to sort these callchains once we have gathered every events from the stream. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1246026481-8314-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25perf-report: Add bare minimum PERF_EVENT_READ parsingPeter Zijlstra
Provide the basic infrastructure to provide per task stats. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25perf_counter: Rework the sample ABIPeter Zijlstra
The PERF_EVENT_READ implementation made me realize we don't actually need the sample_type int the output sample, since we already have that in the perf_counter_attr information. Therefore, remove the PERF_EVENT_MISC_OVERFLOW bit and the event->type overloading, and imply put counter overflow samples in a PERF_EVENT_SAMPLE type. This also fixes the issue that event->type was only 32-bit and sample_type had 64 usable bits. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25perf_counter tools: Rework the file formatPeter Zijlstra
Create a structured file format that includes the full perf_counter_attr and all its relevant counter IDs so that the reporting program has full information. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-23perf_counter tools: Handle overlapping MMAP eventsPeter Zijlstra
Martin Schwidefsky reported "perf report" symbol resolution problems on S390. Since we only report MMAP, not MUNMAP, we have to deal with overlapping maps. We used to simply throw out the old map on the assumption whole maps got unmapped. This obviously doesn't deal with partial unmaps. However it appears some dynamic linkers do fancy partial unmaps (s390), so do something more elaborate and truncate the old maps, only removing them when they've been fully covered. This resolves (part of) the S390 symbol resolution problems. Reported-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Tested-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-22perf report: Output more symbol related debug dataPeter Zijlstra
Print more symbol relocation related info under -vv. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-20perfcounter: Handle some IO return valuesFrederic Weisbecker
Building perfcounter tools raises the following warnings: builtin-record.c: In function ‘atexit_header’: builtin-record.c:464: erreur: ignoring return value of ‘pwrite’, declared with attribute warn_unused_result builtin-record.c: In function ‘__cmd_record’: builtin-record.c:503: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result builtin-report.c: In function ‘__cmd_report’: builtin-report.c:1403: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result This patch handles these IO return values. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1245456100-5477-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19perf_counter tools: Define and use our own u64, s64 etc. definitionsPaul Mackerras
On 64-bit powerpc, __u64 is defined to be unsigned long rather than unsigned long long. This causes compiler warnings every time we print a __u64 value with %Lx. Rather than changing __u64, we define our own u64 to be unsigned long long on all architectures, and similarly s64 as signed long long. For consistency we also define u32, s32, u16, s16, u8 and s8. These definitions are put in a new header, types.h, because these definitions are needed in util/string.h and util/symbol.h. The main change here is the mechanical change of __[us]{64,32,16,8} to remove the "__". The other changes are: * Create types.h * Include types.h in perf.h, util/string.h and util/symbol.h * Add types.h to the LIB_H definition in Makefile * Added (u64) casts in process_overflow_event() and print_sym_table() to kill two remaining warnings. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: benh@kernel.crashing.org LKML-Reference: <19003.33494.495844.956580@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19perf_counter tools: Add a data file headerPeter Zijlstra
Add a data file header so we can transfer data between record and report. LKML-Reference: <new-submission> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19perf_counter: Update userspace callchain sampling usesPeter Zijlstra
Update the tools to reflect the new callchain sampling format. LKML-Reference: <new-submission> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 20:53:33 +0000