aboutsummaryrefslogtreecommitdiff
path: root/tools/perf/util/probe-file.h
AgeCommit message (Collapse)Author
2019-11-18perf probe: Support DW_AT_const_value constant valueMasami Hiramatsu
Support DW_AT_const_value for variable assignment instead of location. Note that this requires ftrace supporting immediate value. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Link: http://lore.kernel.org/lkml/157406476012.24476.16096289871757175775.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-18perf probe: Support multiprobe eventMasami Hiramatsu
Support multiprobe event if the event is based on function and lines and kernel supports it. In this case, perf probe creates the first probe with an event, and tries to append following probes on that event, since those probes must be on the same source code line. Before this patch; # perf probe -a vfs_read:18 Added new events: probe:vfs_read_L18 (on vfs_read:18) probe:vfs_read_L18_1 (on vfs_read:18) You can now use it in all perf tools, such as: perf record -e probe:vfs_read_L18_1 -aR sleep 1 # After this patch (on multiprobe supported kernel) # perf probe -a vfs_read:18 Added new events: probe:vfs_read_L18 (on vfs_read:18) probe:vfs_read_L18 (on vfs_read:18) You can now use it in all perf tools, such as: perf record -e probe:vfs_read_L18 -aR sleep 1 # Committer testing: On a kernel that doesn't support multiprobe events, after this patch: # uname -a Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux # grep append /sys/kernel/debug/tracing/README be modified by appending '.descending' or '.ascending' to a can be modified by appending any of the following modifiers # # perf probe -a vfs_read:18 Added new events: probe:vfs_read_L18 (on vfs_read:18) probe:vfs_read_L18_1 (on vfs_read:18) You can now use it in all perf tools, such as: perf record -e probe:vfs_read_L18_1 -aR sleep 1 # perf probe -l probe:vfs_read_L18 (on vfs_read:18@fs/read_write.c) probe:vfs_read_L18_1 (on vfs_read:18@fs/read_write.c) # Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Link: http://lore.kernel.org/lkml/157406475010.24476.586290752591512351.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-25perf-probe: Add user memory access attribute supportMasami Hiramatsu
Add user memory access attribute for kprobe event arguments. If a given 'local variable' is in user-space, User can specify memory access method by '@user' suffix. This is not only for string but also for data structure. If we access a field of data structure in user memory from kernel on some arch, it will fail. e.g. perf probe -a "sched_setscheduler param->sched_priority" This will fail to access the "param->sched_priority" because the param is __user pointer. Instead, we can now specify @user suffix for such argument. perf probe -a "sched_setscheduler param->sched_priority@user" Note that kernel memory access with "@user" must always fail on any arch. Link: http://lkml.kernel.org/r/155789874562.26965.10836126971405890891.stgit@devnote2 Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-09-24perf probe: Support SDT markers having reference counter (semaphore)Ravi Bangoria
With this, perf buildid-cache will save SDT markers with reference counter in probe cache. Perf probe will be able to probe markers having reference counter. Ex, # readelf -n /tmp/tick | grep -A1 loop2 Name: loop2 ... Semaphore: 0x0000000010020036 # ./perf buildid-cache --add /tmp/tick # ./perf probe sdt_tick:loop2 # ./perf stat -e sdt_tick:loop2 /tmp/tick hi: 0 hi: 1 hi: 2 ^C Performance counter stats for '/tmp/tick': 3 sdt_tick:loop2 2.561851452 seconds time elapsed Link: http://lkml.kernel.org/r/20180820044250.11659-5-ravi.bangoria@linux.ibm.com Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-18perf buildid-cache: Support binary objects from other namespacesKrister Johansen
Teach buildid-cache how to add, remove, and update binary objects from other mount namespaces. Allow probe events tracing binaries in different namespaces to add their objects to the probe and build-id caches too. As a handy side effect, this also lets us access SDT probes in binaries from alternate mount namespaces. Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1499305693-1599-5-git-send-email-kjlx@templeofstupid.com [ Add util/namespaces.c to tools/perf/util/python-ext-sources, to fix the python binding 'perf test' ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf str{filter,list}: Disentangle headersArnaldo Carvalho de Melo
There are places where we just need a forward declaration, and others were we need to include strlist.h and/or strfilter.h, reducing the impact of changes in headers on the build time, do it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-zab42gbiki88y9k0csorxekb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-14perf kretprobes: Offset from reloc_sym if kernel supports itNaveen N. Rao
We indicate support for accepting sym+offset with kretprobes through a line in ftrace README. Parse the same to identify support and choose the appropriate format for kprobe_events. As an example, without this perf patch, but with the ftrace changes: naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/tracing/README | grep kretprobe place (kretprobe): [<module>:]<symbol>[+<offset>]|<memaddr> naveen@ubuntu:~/linux/tools/perf$ naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d8] Probe point found: do_open+0 Matched function: do_open [35d76b5] found inline addr: 0xc0000000004ba984 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open do_open+0 Writing event: r:probe/do_open_1 do_open+0 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004433d0 r do_open+0x0 [DISABLED] c0000000004433d0 r do_open+0x0 [DISABLED] And after this patch (and the subsequent powerpc patch): naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d8] Probe point found: do_open+0 Matched function: do_open [35d76b5] found inline addr: 0xc0000000004ba984 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469712 Writing event: r:probe/do_open_1 _text+4956248 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004433d0 r do_open+0x0 [DISABLED] c0000000004ba058 r do_open+0x8 [DISABLED] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/496ef9f33c1ab16286ece9dd62aa672807aef91c.1488961018.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-03perf probe: Generalize probe event file open routineNaveen N. Rao
Generalize probe event file open routine into a generic function for opening trace files. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/b580465c7a4dcd5d3b40fdf8568e6be45d0a6333.1487849577.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf probe: Add supported for type casting by the running kernelMasami Hiramatsu
Add a checking routine what types are supported by the running kernel by finding the pattern in <debugfs>/tracing/README. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Naohiro Aota <naohiro.aota@hgst.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/147151071172.12957.3340095690753291085.stgit@devbox [ 'enum probe_type' has no negative entries, so ends up as 'unsigned', remove '< 0' test to fix the build on at least centos:5, debian:7 & ubuntu:12.04.5 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13perf list: Show SDT and pre-cached eventsMasami Hiramatsu
Show SDT and pre-cached events by perf-list with "sdt". This also shows the binary and build-id where the events are placed only when there are same name events on different binaries. e.g.: # perf list sdt List of pre-defined events (to be used in -e): sdt_libc:lll_futex_wake [SDT event] sdt_libc:lll_lock_wait_private [SDT event] sdt_libc:longjmp [SDT event] sdt_libc:longjmp_target [SDT event] ... sdt_libstdcxx:rethrow@/usr/bin/gcc(0cc207fc4b27) [SDT event] sdt_libstdcxx:rethrow@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49) sdt_libstdcxx:throw@/usr/bin/gcc(0cc207fc4b27) [SDT event] sdt_libstdcxx:throw@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49) The binary path and build-id are shown in below format; <GROUP>:<EVENT>@<PATH>(<BUILD-ID>) Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160624090646.25421.44225.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13perf probe: Allow wildcard for cached eventsMasami Hiramatsu
Allo glob wildcard for reusing cached/SDT events. E.g. # perf probe -x /usr/lib64/libc-2.20.so -a %sdt_libc:\* This example adds probes for all SDT in libc. Note that the SDTs must have been scanned by perf buildid-cache. Committer note: Using it to check what of those SDT probes would take place when doing a cargo run (rust): # trace --no-sys --event sdt_libc:* cargo run 0.000 sdt_libc:setjmp:(7f326b69c4d1)) 28.423 sdt_libc:setjmp:(7f4b0a5364d1)) 29.000 sdt_libc:setjmp:(7f4b0a5364d1)) 88.597 sdt_libc:setjmp:(7fc01fd414d1)) 89.220 sdt_libc:setjmp:(7fc01fd414d1)) 95.501 sdt_libc:setjmp:(7f326b69c4d1)) Running `target/debug/hello_world` 97.110 sdt_libc:setjmp:(7f95e09234d1)) Hello, world! # Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146831791813.17065.17846564230840594888.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13perf probe-cache: Add for_each_probe_cache_entry() wrapperMasami Hiramatsu
Add for_each_probe_cache_entry() wrapper macro for hiding list in probe_cache. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146831790386.17065.15082256697569419710.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04perf buildid-cache: Scan and import user SDT events to probe cacheMasami Hiramatsu
perf buildid-cache --add <binary> scans given binary and add the SDT events to probe cache. "sdt_" prefix is appended for all SDT providers to avoid event-name clash with other pre-defined events. It is possible to use the cached SDT events as other cached events, via perf probe --add "sdt_<provider>:<event>=<event>". e.g. ---- # perf buildid-cache --add /lib/libc-2.17.so # perf probe --cache --list | head -n 5 /usr/lib/libc-2.17.so (a6fb821bdf53660eb2c29f778757aef294d3d392): sdt_libc:setjmp=setjmp sdt_libc:longjmp=longjmp sdt_libc:longjmp_target=longjmp_target sdt_libc:memory_heap_new=memory_heap_new # perf probe -x /usr/lib/libc-2.17.so \ -a sdt_libc:memory_heap_new=memory_heap_new Added new event: sdt_libc:memory_heap_new (on memory_heap_new in /usr/lib/libc-2.17.so) You can now use it in all perf tools, such as: perf record -e sdt_libc:memory_heap_new -aR sleep 1 # perf probe -l sdt_libc:memory_heap_new (on new_heap+183 in /usr/lib/libc-2.17.so) ---- Note that SDT event entries in probe-cache file is somewhat different from normal cached events. Normal one starts with "#", but SDTs are starting with "%". Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146736025058.27797.13043265488541434502.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-01perf probe: Remove caches when --cache is givenMasami Hiramatsu
'perf probe --del' removes caches when '--cache' is given. Note that the delete pattern is not the same as for normal events. If you cached probes with event name, --del "eventname" works as expected. However, if you skipped it, the cached probes doesn't have actual event name. In that case --del "probe-desc" is required (wildcard is acceptable). For example a cache entry has the probe-desc "vfs_read $params", you can remove it with --del 'vfs_read*'. ----- # perf probe --cache --list /[kernel.kallsyms] (1466a0a250b5d0070c6d0f03c5fed30b237970a1): vfs_read $params /usr/lib64/libc-2.17.so (c31ffe7942bfd77b2fca8f9bd5709d387a86d3bc): getaddrinfo $params # perf probe --cache --del vfs_read\* Removed cached event: probe:vfs_read # perf probe --cache --list /[kernel.kallsyms] (1466a0a250b5d0070c6d0f03c5fed30b237970a1): /usr/lib64/libc-2.17.so (c31ffe7942bfd77b2fca8f9bd5709d387a86d3bc): getaddrinfo $params ----- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146736021651.27797.10250879847070772920.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-01perf probe: Show all cached probesMasami Hiramatsu
perf probe --list shows all cached probes when --cache is given. Each caches are shown with on which binary that probed. E.g.: ----- # perf probe --cache vfs_read \$params # perf probe --cache -x /lib64/libc-2.17.so getaddrinfo \$params # perf probe --cache --list [kernel.kallsyms] (1466a0a250b5d0070c6d0f03c5fed30b237970a1): vfs_read $params /usr/lib64/libc-2.17.so (c31ffe7942bfd77b2fca8f9bd5709d387a86d3bc): getaddrinfo $params ----- Note that $params requires debuginfo. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146736020674.27797.13488316780383460180.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-01perf probe: Use cache entry if possibleMasami Hiramatsu
Before analyzing debuginfo, try to find a corresponding entry from probe cache always. This does not depend on --cache, the --cache enables to store/update cache, but looking up the cache is always enabled. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146736019226.27797.16366402884098398857.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15perf probe: Introduce perf_cache interfacesMasami Hiramatsu
Introduce perf_cache object and interfaces to create, add entries, commit, and delete the object. perf_cache represents a file for the cached "perf probe" definitions on one binary file or vmlinux which has its own build id. The probe cache file is located under the build-id cache directory of the target binary, as below; <perf-debug-dir>/.build-id/<BU>/<ILDID>/probe Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160615032830.31330.84998.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-04perf probe: Print deleted events in cmd_probe()Namhyung Kim
Showing actual trace event when deleteing perf events is only needed in perf probe command. But the add functionality itself can be used by other places. So move the printing code into the cmd_probe(). The output is not changed. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1441368963-11565-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20perf probe: Move ftrace probe-event operations to probe-file.cMasami Hiramatsu
Move ftrace probe-event operations to probe-file.c from probe-event.c. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150715091407.8915.14316.stgit@localhost.localdomain [ Fixed up strlist__new() calls wrt 4a77e2183fc0 ("perf strlist: Make dupstr be the...") ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>