| Age | Commit message (Collapse) | Author |
|---|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- New bootctl driver for Mellanox BlueField SoC.
- New driver to support System76 laptops.
- Temperature monitoring and fan control on Acer Aspire 7551 is now
supported.
- Previously the Huawei driver handled only hotkeys. After the
conversion to WMI it has been expanded to support newer laptop
models.
- Big refactoring of intel-speed-select tools allows to use it on Intel
CascadeLake-N systems.
- Touchscreen support for ezpad 6 m4 and Schneider SCT101CTM tablets
- Miscellaneous clean ups and fixes here and there.
* tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86: (59 commits)
platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size
platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer
platform/x86: intel_pmc_core: Add Comet Lake (CML) platform support to intel_pmc_core driver
platform/x86: intel_pmc_core: Fix the SoC naming inconsistency
platform/mellanox: Fix Kconfig indentation
tools/power/x86/intel-speed-select: Display TRL buckets for just base config level
tools/power/x86/intel-speed-select: Ignore missing config level
platform/x86: touchscreen_dmi: Add info for the ezpad 6 m4 tablet
tools/power/x86/intel-speed-select: Increment version
tools/power/x86/intel-speed-select: Use core count for base-freq mask
tools/power/x86/intel-speed-select: Support platform with limited Intel(R) Speed Select
tools/power/x86/intel-speed-select: Use Frequency weight for CLOS
tools/power/x86/intel-speed-select: Make CLOS frequency in MHz
tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG
tools/power/x86/intel-speed-select: Auto mode for CLX
tools/power/x86/intel-speed-select: Correct CLX-N frequency units
tools/power/x86/intel-speed-select: Change display of "avx" to "avx2"
tools/power/x86/intel-speed-select: Extend command set for perf-profile
Add touchscreen platform data for the Schneider SCT101CTM tablet
platform/x86: intel_int0002_vgpio: Pass irqchip when adding gpiochip
...
|
|
level
When only base config level is present, this tool is displaying TRL
(Turbo-ratio-limits) by reading legacy MSR. In this case, also present
core count for TRL by reading MSR 0x1AE.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
It is possible that certain config levels are not available, even
if the max level includes the level. There can be missing levels in
some platforms. So ignore the level when called for information dump
for all levels and fail if specifically ask for the missing level.
Here the changes is to continue reading information about other levels
even if we fail to get information for the current level. But use the
"processed" flag to indicate the failure. When the "processed" flag is
not set, don't dump information about that level.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Since the tool now adds support for another Intel SST implementation,
increment version number.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Some firmware implementation gives error when a command is sent get mask
for core count 32-61. So use core count to decide.
But there is no function to get core count. So introduce one function to
get core count.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Speed Select
There are some platforms, where there limited support of Intel(R) SST
features. Here perf-profile has only one base configuration and limited
support of commands. But still has support for discovery of base-freq and
turbo-freq features. So it is important to show minimum features to use
base-freq and turbo-freq features.
Here the change are:
- When there is no support of CONFIG_TDP_GET_LEVELS_INFO, then instead
of treating this as fatal error, treat this with number of config levels
= 0, that means only base level 0 is present.
- There is no support of mail box commands to get base frequencies or
turbo frequencies. Here present base frequency by reading cpufreq
base freq and turbo frequency by reading MSR 0x1AD.
- Don't display any field, which has value == 0.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Use different frequency weights for CLOS 0 and and CLOS1-3, to define
relative priority for power budgeting. This will be used for --auto
mode to enable base-freq and turbo-freq feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
To be consistant with the other frequency units, change the CLOS
unit to MHz instead of ratios.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Use mailbox to read/write CLOS_PM_QOS_CONFIG instead of read/write to
MMIO offset.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
There is an expectation in the CLX platform for SST base-freq feature that
Scaling min frequency be different for high and low priority cores.
This is the way the firmware will understand the priority.
So this change will look at high priority and low priority cores, and set
scaling_min_freq to P1High for high priority cores and P1Low to low
priority cores.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
In CLX_N base_frequency is read from cpufreq sysfs, where units are in
KHz. The internal units in the code matches the real ratios which are
in 100MHz scale. So when storing units for CLX-N frequencies, convert
to 100MHz scale.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Make the avx level display consistent. Except for "turbo-ratio-limits-avx",
everywhere else it is avx2. So change "turbo-ratio-limits-avx"
to "turbo-ratio-limits-avx2".
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add support for uncore P0, uncore P1, P1 for base and AVX levels and
memory frequency. These commands are optional, so continue on
failure.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Based on Thomas Renninger's feedback/ideas. Re-structure the code
to better handle the per_cpu_schedule mechanism which was introduced
when adding support for AMD Zen based processors.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
AMD Zen 2 introduces the RDPRU instruction which can be used to access some
processor registers which are typically only accessible in privilege level
0. ECX specifies the register to read and EDX:EAX will contain the value read.
ECX: 0 - Register MPERF
1 - Register APERF
This has the added advantage of not having to use the msr module, since the
userspace to kernel transitions which occur during each read_msr() might
cause APERF and MPERF to go out of sync.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The per_cpu_schedule flag is used to move the cpupower process to the cpu
on which we are looking to read the APERF/MPERF registers.
This prevents IPIs from being generated by read_msr()s as we are already
on the cpu of interest.
Ex: If cpupower is running on CPU 0 and we execute
read_msr(20, MSR_APERF, val) then,
read_msr(20, MSR_MPERF, val)
the msr module will generate an IPI from CPU 0 to CPU 20 to query
for the MSR_APERF and then the MSR_MPERF in separate IPIs.
This delay, caused by IPI latency, between reading the APERF and MPERF
registers may cause both of them to go out of sync.
The use of the per_cpu_schedule flag reduces the probability of this
from happening. It comes at the cost of a negligible increase in cpu
consumption caused by the migration of cpupower across each of the
cpus of the system.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Move the needs_root variable into a sub-struct. This is in preparation
for adding a new flag for cpuidle_monitor.
Update all uses of the needs_root variable to reflect this change.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Cpupower tool has set and info options which are being used only by
x86 machines. This patch removes support for these two subcommands
from cpupower utility for POWER. Thus, these two subcommands will now be
available only for intel.
This removes the ambiguous error message while using set option in case
of using non-intel systems.
Without this patch on a POWER system:
root@ubuntu:~# cpupower info
System does not support Intel's performance bias setting
root@ubuntu:~# cpupower set -b 10
Error setting perf-bias value on CPU
With this patch on a POWER box:
root@ubuntu:~# cpupower info
Subcommand not supported on POWER
Same result for set subcommand.
This patch does not affect results on a intel box.
Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
CascadeLake-N
Add functionality for base-freq info|enable|disable info on CascadeLake-N.
Sample output:
Intel(R) Speed Select Technology
Executing on CPU model:85[0x55]
package-0
die-0
cpu-0
speed-select-base-freq
high-priority-base-frequency(MHz):2700000
high-priority-cpu-mask:00000000,0000e8c0
high-priority-cpu-list:6,7,11,13,14,15
low-priority-base-frequency(MHz):2100000
package-1
die-0
cpu-20
speed-select-base-freq
high-priority-base-frequency(MHz):2700000
high-priority-cpu-mask:0000000e,8c000000
high-priority-cpu-list:26,27,31,33,34,35
low-priority-base-frequency(MHz):2100000
The enable command always returns success, and the disable command always
returns failed because SST-BF cannot be enabled or disabled from the OS on
CascadeLake-N.
Enable command also have support for --auto|-a option, which sets cpufreq
scaling_min to max, so that the high priority base frequency can be the
required minimum for high priority cores. Disable command with -a/--auto
option reset the setting back to the min frequency.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
CascadeLake-N
Add functionality for "perf-profile info" on CascadeLake-N.
Sample output:
intel-speed-select perf-profile info
Intel(R) Speed Select Technology
Executing on CPU model:85[0x55]
package-0
die-0
cpu-0
perf-profile-level-0
cpu-count:20
enable-cpu-mask:00000000,000fffff
enable-cpu-list:0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
thermal-design-power-ratio:23
base-frequency(MHz):2300
speed-select-turbo-freq:unsupported
speed-select-base-freq:enabled
speed-select-base-freq
high-priority-base-frequency(MHz):2700000
high-priority-cpu-mask:00000000,0000e8c0
high-priority-cpu-list:6,7,11,13,14,15
low-priority-base-frequency(MHz):2100000
package-1
die-0
cpu-20
perf-profile-level-0
cpu-count:20
enable-cpu-mask:000000ff,fff00000
enable-cpu-list:20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39
thermal-design-power-ratio:23
base-frequency(MHz):2300
speed-select-turbo-freq:unsupported
speed-select-base-freq:enabled
speed-select-base-freq
high-priority-base-frequency(MHz):2700000
high-priority-cpu-mask:0000000e,8c000000
high-priority-cpu-list:26,27,31,33,34,35
low-priority-base-frequency(MHz):2100000
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
functions structures
CascadeLake-N only supports SST-BF and needs some of the perf-profile
commands, and the base-freq commands.
Add help functions, and create an empty command structures (the functions
will be implemented later in this patchset). Call these functions
when running on CascadeLake-N.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Three CascadeLake-N models (6252N, 6230N, and 5218N) have SST-PBF support.
Return an error if the CascadeLake processor is not one of these specific
models.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Make the process_command take any help command and command list. This
will make it easier to help commands and a command list for CascadeLake-N.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The current code structure has similar but separate command functions for
the enable and disable operations. This can be improved by adding an int
argument to the command function structure, and interpreting 1 as enable
and 0 as disable. This change results in the removal of the disable
command functions.
Add int argument to the command function structure.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
getting used
The turbo-freq feature is dependent on the core-power feature. If the
core-power feature is disabled while the turbo-freq feature is enabled,
this will break the turbo-freq feature. This is a firmware limitation,
where they can't return error under this scenario.
So when trying to disable core-power, make sure that the turbo-freq
feature is not enabled. If it enabled, return error if user is trying to
disable the core-power feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Introduce --auto|-a option to turbo-freq enable feature, so that it
does in one step for users who are OK by setting all passed target cores
as high priority and set in CLOS 0 and remaining in CLOS 3. In this way,
users don't have to take multiple steps to enable turbo-freq feature. For
users who want more fine grain control, they can always use core-power
feature to set custom CLOS configuration and assignment.
While here also print the error to output when clos configuration fails.
For example
intel-speed-select -c 0-4 turbo-freq enable --auto
The above command will enable turbo-freq and core-power feature. Also
mark CPU 0 to CPU 4 as high priority.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Introduce --auto|-a option to base-freq enable feature, so that it
does in one step for users who are OK by setting all cores with higher
base frequency to be set in CLOS 0 and remaining in CLOS 3. This option
also sets corresponding clos.min to CLOS 0 and CLOS3. In this way, users
don't have to take multiple steps to enable base-freq feature. For users
who want more fine grain control, they can always use core-power feature
to set custom CLOS configuration and assignment.
Also adjust cpufreq/scaling_min_freq for higher and lower priority cores.
For example user can use:
intel-speed-select base-freq enable --auto
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Fix warning for:
isst-config.c: In function ‘set_cpu_online_offline’:
isst-config.c:221:3: warning: ignoring return value of ‘write’,
declared with attribute warn_unused_result [-Wunused-result]
write(fd, "1\n", 2);
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When building cpupower with clang, the following warning appears:
utils/idle_monitor/hsw_ext_idle.c:42:16: warning: initializer overrides
prior initialization of this subobject [-Winitializer-overrides]
.desc = N_("Processor Package C2"),
^~~~~~~~~~~~~~~~~~~~~~
./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
#define N_(String) gettext_noop(String)
^~~~~~
./utils/helpers/helpers.h:23:30: note: expanded from macro
'gettext_noop'
#define gettext_noop(String) String
^~~~~~
utils/idle_monitor/hsw_ext_idle.c:41:16: note: previous initialization
is here
.desc = N_("Processor Package C9"),
^~~~~~~~~~~~~~~~~~~~~~
./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
#define N_(String) gettext_noop(String)
^~~~~~
./utils/helpers/helpers.h:23:30: note: expanded from macro
'gettext_noop'
#define gettext_noop(String) String
^~~~~~
1 warning generated.
This appears to be a copy and paste or merge mistake because the name
and id fields both have PC9 in them, not PC2. Remove the second
assignment to fix the warning.
Fixes: 7ee767b69b68 ("cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states")
Link: https://github.com/ClangBuiltLinux/linux/issues/718
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform-drivers fixes from Andy Shevchenko:
- Fix compilation error of ASUS WMI driver when CONFIG_ACPI_BATTERY=n
- Fix I²C multi-instantiate driver to work with several USB PD devices
- Fix boot issue on Siemens SIMATIC IPC277E when PMC critical clock is
being disabled
- Plenty of fixes to Intel Speed-Select Technology tools
* tag 'platform-drivers-x86-v5.4-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: i2c-multi-instantiate: Derive the device name from parent
platform/x86: pmc_atom: Add Siemens SIMATIC IPC277E to critclk_systems DMI table
tools/power/x86/intel-speed-select: Fix perf-profile command output
tools/power/x86/intel-speed-select: Extend core-power command set
tools/power/x86/intel-speed-select: Fix some debug prints
tools/power/x86/intel-speed-select: Format get-assoc information
tools/power/x86/intel-speed-select: Allow online/offline based on tdp
tools/power/x86/intel-speed-select: Fix high priority core mask over count
platform/x86: asus-wmi: Make it depend on ACPI battery API
|
|
commit "c016ae8f9fa04d361efc8629de49ad3af12b5262
"tools/power/x86/intel-speed-select: Output success/failed for command
output" introduced a regression in perf-profile outputs. With this
the result field is changed to string interpreting every non zero
value as errors. But these commands display on zero (>0) result.
For example before this commit the display was:
package-1
die-0
cpu-14
get-config-levels:4
Here the get-config-levels is interpreted as error and displayed
as error with the above commit:
package-1
die-0
cpu-14
get-config-levels:failed(error 4)
Fix this issue by not using isst_display_result() to display such results,
but define a new function which formats this data and prints.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add additional command to get the clos enable and priority type. The
current info option is actually dumping per clos QOS config, so name
the command appropriately to get-config.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Fix wrong debug print for cpu, which is displayed as CLOS. Also
avoid printing clos id, when user is specify clos as parameter.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Format the get-assoc command output consistant with other commands.
For example:
Intel(R) Speed Select Technology
Executing on CPU model:142[0x8e]
package-0
die-0
cpu-0
get-assoc
clos:0
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Using enable core mask, do online offline CPUs. There is a new option
--online|-o for set-config-level.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
If the CPU package has the less logical CPU than topo_max_cpus, but un-present
CPU's punit_cpu_core will be initiated to 0 and they will be count to core 0
Like below, there are only 10 high priority cores (20 logical CPUs) in the CPU
package, but it count to 27 logic CPUs.
./intel-speed-select base-freq info -l 0 | grep mask
high-priority-cpu-mask:7f000179,f000179f
With the fix patch:
./intel-speed-select base-freq info -l 0
high-priority-cpu-mask:00000179,f000179f
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include an ACPICA update (to upstream revision 20190816),
improvements of support for memory hot-add in the HMAT handling code
and some assorted fixes and cleanups.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20190816
including:
* Internal limits change to support larger systems (Bob Moore).
* Macros clean up (Bob Moore).
* printf format string fixes (Bob Moore).
* Full deployment of the ACPI_PRINTF_LIKE macro (Bob Moore).
* Tools improvements (Bob Moore, Colin Ian King).
* Windows _OSI support fixes (Jung-uk Kim).
- Improve memory hot-add support in the ACPI HMAT handling code (Dan
Williams, Keith Busch).
- Fix the ACPI LPSS (Low-Power Subsystem) driver for Intel SoCs to
save and restore private registers during system-wide suspend and
resume on systems with the Lynxpoint PCH (Jarkko Nikula).
- Convert the ACPI documentation related to LEDs to ReST (Sakari
Ailus).
- Fix assorted issues and make assorted minor improvements in the
ACPI-related code (Al Stone, Andy Shevchenko, Jiri Slaby, Kelsey
Skunberg, Krzysztof Wilczynski, Liguang Zhang, Wenwen Wang,
YueHaibing)"
* tag 'acpi-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
ACPI / PCI: fix acpi_pci_irq_enable() memory leak
ACPI: custom_method: fix memory leaks
ACPI: thermal: Remove redundant acpi_has_method() calls
ACPI / CPPC: do not require the _PSD method
ACPI: SBS: remove unused const variable 'SMBUS_PEC'
ACPI / LPSS: Save/restore LPSS private registers also on Lynxpoint
ACPI/PCI: Remove surplus parentheses from a return statement
ACPICA: Update version to 20190816.
ACPICA: Add "Windows 2019" string to _OSI support.
ACPICA: Differentiate Windows 8.1 from Windows 8.
ACPICA: Fully deploy ACPI_PRINTF_LIKE macro
ACPICA: iASL,acpi_dump: Improve y/n query
ACPICA: Fix issues with arg types within printf format strings
ACPICA: Macros: remove pointer math on a null pointer
ACPICA: Increase total number of possible Owner IDs
ACPICA: Debugger: remove redundant assignment on obj_desc
Documentation: ACPI: DSD: Convert LED documentation to ReST
ACPI / APEI: Release resources if gen_pool_add() fails
HMAT: Skip publishing target info for nodes with no online memory
HMAT: Register attributes for memory hot add
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include a rework of the main suspend-to-idle code flow (related
to the handling of spurious wakeups), a switch over of several users
of cpufreq notifiers to QoS-based limits, a new devfreq driver for
Tegra20, a new cpuidle driver and governor for virtualized guests, an
extension of the wakeup sources framework to expose wakeup sources as
device objects in sysfs, and more.
Specifics:
- Rework the main suspend-to-idle control flow to avoid repeating
"noirq" device resume and suspend operations in case of spurious
wakeups from the ACPI EC and decouple the ACPI EC wakeups support
from the LPS0 _DSM support (Rafael Wysocki).
- Extend the wakeup sources framework to expose wakeup sources as
device objects in sysfs (Tri Vo, Stephen Boyd).
- Expose system suspend statistics in sysfs (Kalesh Singh).
- Introduce a new haltpoll cpuidle driver and a new matching governor
for virtualized guests wanting to do guest-side polling in the idle
loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell).
- Fix the menu and teo cpuidle governors to allow the scheduler tick
to be stopped if PM QoS is used to limit the CPU idle state exit
latency in some cases (Rafael Wysocki).
- Increase the resolution of the play_idle() argument to microseconds
for more fine-grained injection of CPU idle cycles (Daniel
Lezcano).
- Switch over some users of cpuidle notifiers to the new QoS-based
frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
policy notifier events (Viresh Kumar).
- Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
- Add support for MT8183 and MT8516 to the mediatek cpufreq driver
(Andrew-sh.Cheng, Fabien Parent).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang).
- Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
- Update the qcom cpufreq driver (among other things, to make it
easier to extend and to use kryo cpufreq for other nvmem-based
SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
RAILLARD, Sibi Sankar, Sricharan R).
- Fix assorted issues and make assorted minor improvements in the
cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
Gustavo Silva, Hariprasad Kelam).
- Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
Bergmann).
- Add new Exynos PPMU events to devfreq events and extend that
mechanism (Lukasz Luba).
- Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
- Improve devfreq documentation and governor code, fix spelling typos
in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez,
MyungJoo Ham, Gaël PORTAY).
- Add regulators enable and disable to the OPP (operating performance
points) framework (Kamil Konieczny).
- Update the OPP framework to support multiple opp-suspend properties
(Anson Huang).
- Fix assorted issues and make assorted minor improvements in the OPP
code (Niklas Cassel, Viresh Kumar, Yue Hu).
- Clean up the generic power domains (genpd) framework (Ulf Hansson).
- Clean up assorted pieces of power management code and documentation
(Akinobu Mita, Amit Kucheria, Chuhong Yuan).
- Update the pm-graph tool to version 5.5 including multiple fixes
and improvements (Todd Brandt).
- Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
Sébastien Szymanski)"
* tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits)
cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
cpuidle-haltpoll: do not set an owner to allow modunload
cpuidle-haltpoll: return -ENODEV on modinit failure
cpuidle-haltpoll: set haltpoll as preferred governor
cpuidle: allow governor switch on cpuidle_register_driver()
PM: runtime: Documentation: add runtime_status ABI document
pm-graph: make setVal unbuffered again for python2 and python3
powercap: idle_inject: Use higher resolution for idle injection
cpuidle: play_idle: Increase the resolution to usec
cpuidle-haltpoll: vcpu hotplug support
cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
cpufreq: qcom: Add support for qcs404 on nvmem driver
cpufreq: qcom: Refactor the driver to make it easier to extend
cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
Documentation: cpufreq: Update policy notifier documentation
cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
PM / Domains: Simplify genpd_lookup_dev()
...
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform-drivers updates from Andy Shevchenko:
- ASUS WMI driver got a couple of updates, i.e. support of FAN is fixed
for recent products and the charge threshold support has been added
- Two uknown key events for Dell laptops are being ignored now to avoid
spamming users with harmless messages
- HP ZBook 17 G5 and ASUS Zenbook UX430UNR got accelerometer support.
- Intel CherryTrail platforms had a regression with wake up. Now it's
fixed
- Intel PMC driver got fixed in order to work nicely in Xen
environment
- Intel Speed Select driver provides bucket vs core count relationship.
Besides that the tools has been updated for better output
- The PrivacyGuard is enabled on Lenovo ThinkPad laptops
- Three tablets - Trekstor Primebook C11B 2-in-1, Irbis TW90 and Chuwi
Surbook Mini - got touchscreen support
* tag 'platform-drivers-x86-v5.4-1' of git://git.infradead.org/linux-platform-drivers-x86: (53 commits)
MAINTAINERS: Switch PDx86 subsystem status to Odd Fixes
platform/x86: asus-wmi: Refactor charge threshold to use the battery hooking API
platform/x86: asus-wmi: Rename CHARGE_THRESHOLD to RSOC
platform/x86: asus-wmi: Reorder ASUS_WMI_CHARGE_THRESHOLD
tools/power/x86/intel-speed-select: Display core count for bucket
platform/x86: ISST: Allow additional TRL MSRs
tools/power/x86/intel-speed-select: Fix memory leak
tools/power/x86/intel-speed-select: Output success/failed for command output
tools/power/x86/intel-speed-select: Output human readable CPU list
tools/power/x86/intel-speed-select: Change turbo ratio output to maximum turbo frequency
tools/power/x86/intel-speed-select: Switch output to MHz
tools/power/x86/intel-speed-select: Simplify output for turbo-freq and base-freq
tools/power/x86/intel-speed-select: Fix cpu-count output
tools/power/x86/intel-speed-select: Fix help option typo
tools/power/x86/intel-speed-select: Fix package typo
tools/power/x86/intel-speed-select: Fix a read overflow in isst_set_tdp_level_msr()
platform/x86: intel_int0002_vgpio: Use device_init_wakeup
platform/x86: intel_int0002_vgpio: Fix wakeups not working on Cherry Trail
platform/x86: compal-laptop: Initialize "value" in ec_read_u8()
platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11B 2-in-1
...
|
|
Read the bucket and core count relationship via MSR and display
when displaying turbo ratio limits.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for v5.4 from Shuah Khan:
"This cpupower update for Linux 5.4-rc1 consists of bug fixes and
German translation updates from Benjamin Weis."
* tag 'linux-cpupower-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: update German translation
tools/power/cpupower: fix 64bit detection when cross-compiling
cpupower: Add missing newline at end of file
|
|
cpumasks are allocated by calling the alloc_cpu_mask() function and are
never free'd. They should be free'd after the commands have run.
Fix the memory leaks by calling free_cpu_set().
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Command output has confusing data, returning "0" on success. For example
|# ./intel-speed-select -c 14 turbo-freq enable
Intel(R) Speed Select Technology
Executing on CPU model:106[0x6a]
package-1
die-0
cpu-14
turbo-freq
enable:0
To avoid confusion change the command output to 'success' or 'failed'.
v2: Remove help output line.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The intel-speed-select tool currently only outputs a hexidecimal CPU mask,
which requires translation for use with kernel parameters such as
isolcpus.
Along with the CPU mask, output a human readable CPU list.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
turbo frequency
The intel-speed-select tool currently outputs the turbo ratio for every
bucket. Make the output more user-friendly by changing the output to the
maximum turbo frequency.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
These features are introduced on new processors that will never operate
in the KHz range.
Save some zeros and switch the output to MHz.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The current output of 'intel-speed-select -c 53 perf-profile info -l 0'
shows
speed-select-turbo-freq-support:1
speed-select-base-freq-support:1
speed-select-base-freq-enabled:0
speed-select-turbo-freq-enabled:0
Simplify the output to single lines displaying status of disabled,
enabled, and unsupported.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
I have a system with 28 threads/socket but intel-speed-select reports
a cpu-count of 29.
Fix an off-by-one error in the cpu_count() function.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Help is -h, not --h.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
