aboutsummaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2022-01-19kvm: selftests: conditionally build vm_xsave_req_perm()Wei Wang
vm_xsave_req_perm() is currently defined and used by x86_64 only. Make it compiled into vm_create_with_vcpus() only when on x86_64 machines. Otherwise, it would cause linkage errors, e.g. on s390x. Fixes: 415a3c33e8 ("kvm: selftests: Add support for KVM_CAP_XSAVE2") Reported-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Tested-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Message-Id: <20220118014817.30910-1-wei.w.wang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-17KVM: selftests: Test KVM_SET_CPUID2 after KVM_RUNVitaly Kuznetsov
KVM forbids KVM_SET_CPUID2 after KVM_RUN was performed on a vCPU unless the supplied CPUID data is equal to what was previously set. Test this. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220117150542.2176196-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-17KVM: selftests: Rename 'get_cpuid_test' to 'cpuid_test'Vitaly Kuznetsov
In preparation to reusing the existing 'get_cpuid_test' for testing "KVM_SET_CPUID{,2} after KVM_RUN" rename it to 'cpuid_test' to avoid the confusion. No functional change intended. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220117150542.2176196-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-14selftest: kvm: Add amx selftestYang Zhong
This selftest covers two aspects of AMX. The first is triggering #NM exception and checking the MSR XFD_ERR value. The second case is loading tile config and tile data into guest registers and trapping to the host side for a complete save/load of the guest state. TMM0 is also checked against memory data after save/restore. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20211223145322.2914028-4-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-14selftest: kvm: Move struct kvm_x86_state to headerYang Zhong
Those changes can avoid dereferencing pointer compile issue when amx_test.c reference state->xsave. Move struct kvm_x86_state definition to processor.h. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20211223145322.2914028-3-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-14selftest: kvm: Reorder vcpu_load_state steps for AMXPaolo Bonzini
For AMX support it is recommended to load XCR0 after XFD, so that KVM does not see XFD=0, XCR=1 for a save state that will eventually be disabled (which would lead to premature allocation of the space required for that save state). It is also required to load XSAVE data after XCR0 and XFD, so that KVM can trigger allocation of the extra space required to store AMX state. Adjust vcpu_load_state to obey these new requirements. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20211223145322.2914028-2-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-14kvm: selftests: Add support for KVM_CAP_XSAVE2Wei Wang
When KVM_CAP_XSAVE2 is supported, userspace is expected to allocate buffer for KVM_GET_XSAVE2 and KVM_SET_XSAVE using the size returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2). Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Guang Zeng <guang.zeng@intel.com> Signed-off-by: Jing Liu <jing2.liu@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-20-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07kvm: selftests: move ucall declarations into ucall_common.hMichael Roth
Now that core kvm_util declarations have special home in kvm_util_base.h, move ucall-related declarations out into a separate header. Signed-off-by: Michael Roth <michael.roth@amd.com> Message-Id: <20211210164620.11636-3-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07kvm: selftests: move base kvm_util.h declarations to kvm_util_base.hMichael Roth
Between helper macros and interfaces that will be introduced in subsequent patches, much of kvm_util.h would end up being declarations specific to ucall. Ideally these could be separated out into a separate header since they are not strictly required for writing guest tests and are mostly self-contained interfaces other than a reliance on a few core declarations like struct kvm_vm. This doesn't make a big difference as far as how tests will be compiled/written since all these interfaces will still be packaged up into a single/common libkvm.a used by all tests, but it is still nice to be able to compartmentalize to improve readabilty and reduce merge conflicts in the future for common tasks like adding new interfaces to kvm_util.h. Furthermore, some of the ucall declarations will be arch-specific, requiring various #ifdef'ery in kvm_util.h. Ideally these declarations could live in separate arch-specific headers, e.g. include/<arch>/ucall.h, which would handle arch-specific declarations as well as pulling in common ucall-related declarations shared by all archs. One simple way to do this would be to #include ucall.h at the bottom of kvm_util.h, after declarations it relies upon like struct kvm_vm. This is brittle however, and doesn't scale easily to other sets of interfaces that may be added in the future. Instead, move all declarations currently in kvm_util.h into kvm_util_base.h, then have kvm_util.h #include it. With this change, non-base declarations can be selectively moved/introduced into separate headers, which can then be included in kvm_util.h so that individual tests don't need to be touched. Subsequent patches will then move ucall-related declarations into a separate header to meet the above goals. Signed-off-by: Michael Roth <michael.roth@amd.com> Message-Id: <20211210164620.11636-2-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07KVM: x86/xen: Add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel deliveryDavid Woodhouse
This adds basic support for delivering 2 level event channels to a guest. Initially, it only supports delivery via the IRQ routing table, triggered by an eventfd. In order to do so, it has a kvm_xen_set_evtchn_fast() function which will use the pre-mapped shared_info page if it already exists and is still valid, while the slow path through the irqfd_inject workqueue will remap the shared_info page if necessary. It sets the bits in the shared_info page but not the vcpu_info; that is deferred to __kvm_xen_has_interrupt() which raises the vector to the appropriate vCPU. Add a 'verbose' mode to xen_shinfo_test while adding test cases for this. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-5-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07selftests: KVM: sev_migrate_tests: Add mirror command testsPeter Gonda
Add tests to confirm mirror vms can only run correct subset of commands. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by: Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-4-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07selftests: KVM: sev_migrate_tests: Fix sev_ioctl()Peter Gonda
TEST_ASSERT in SEV ioctl was allowing errors because it checked return value was good OR the FW error code was OK. This TEST_ASSERT should require both (aka. AND) values are OK. Removes the LAUNCH_START from the mirror VM because this call correctly fails because mirror VMs cannot call this command. Currently issues with the PSP driver functions mean the firmware error is not always reset to SEV_RET_SUCCESS when a call is successful. Mainly sev_platform_init() doesn't correctly set the fw error if the platform has already been initialized. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by: Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-3-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07selftests: KVM: sev_migrate_tests: Fix test_sev_mirror()Peter Gonda
Mirrors should not be able to call LAUNCH_START. Remove the call on the mirror to correct the test before fixing sev_ioctl() to correctly assert on this failed ioctl. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by: Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-2-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07Merge tag 'kvm-riscv-5.17-1' of https://github.com/kvm-riscv/linux into HEADPaolo Bonzini
KVM/riscv changes for 5.17, take #1 - Use common KVM implementation of MMU memory caches - SBI v0.2 support for Guest - Initial KVM selftests support - Fix to avoid spurious virtual interrupts after clearing hideleg CSR - Update email address for Anup and Atish
2022-01-07Merge tag 'kvmarm-5.17' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.16 - Simplification of the 'vcpu first run' by integrating it into KVM's 'pid change' flow - Refactoring of the FP and SVE state tracking, also leading to a simpler state and less shared data between EL1 and EL2 in the nVHE case - Tidy up the header file usage for the nvhe hyp object - New HYP unsharing mechanism, finally allowing pages to be unmapped from the Stage-1 EL2 page-tables - Various pKVM cleanups around refcounting and sharing - A couple of vgic fixes for bugs that would trigger once the vcpu xarray rework is merged, but not sooner - Add minimal support for ARMv8.7's PMU extension - Rework kvm_pgtable initialisation ahead of the NV work - New selftest for IRQ injection - Teach selftests about the lack of default IPA space and page sizes - Expand sysreg selftest to deal with Pointer Authentication - The usual bunch of cleanups and doc update
2022-01-06KVM: selftests: Add initial support for RISC-V 64-bitAnup Patel
We add initial support for RISC-V 64-bit in KVM selftests using which we can cross-compile and run arch independent tests such as: demand_paging_test dirty_log_test kvm_create_max_vcpus, kvm_page_table_test set_memory_region_test kvm_binary_stats_test All VM guest modes defined in kvm_util.h require at least 48-bit guest virtual address so to use KVM RISC-V selftests hardware need to support at least Sv48 MMU for guest (i.e. VS-mode). Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
2022-01-06KVM: selftests: Add EXTRA_CFLAGS in top-level MakefileAnup Patel
We add EXTRA_CFLAGS to the common CFLAGS of top-level Makefile which will allow users to pass additional compile-time flags such as "-static". Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com> Reviewed-and-tested-by: Sean Christopherson <seanjc@google.com>
2022-01-04Merge branch kvm-arm64/misc-5.17 into kvmarm-master/nextMarc Zyngier
* kvm-arm64/misc-5.17: : . : Misc fixes and improvements: : - Add minimal support for ARMv8.7's PMU extension : - Constify kvm_io_gic_ops : - Drop kvm_is_transparent_hugepage() prototype : - Drop unused workaround_flags field : - Rework kvm_pgtable initialisation : - Documentation fixes : - Replace open-coded SCTLR_EL1.EE useage with its defined macro : - Sysreg list selftest update to handle PAuth : - Include cleanups : . KVM: arm64: vgic: Replace kernel.h with the necessary inclusions KVM: arm64: Fix comment typo in kvm_vcpu_finalize_sve() KVM: arm64: selftests: get-reg-list: Add pauth configuration KVM: arm64: Fix comment on barrier in kvm_psci_vcpu_on() KVM: arm64: Fix comment for kvm_reset_vcpu() KVM: arm64: Use defined value for SCTLR_ELx_EE KVM: arm64: Rework kvm_pgtable initialisation KVM: arm64: Drop unused workaround_flags vcpu field Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-01-04Merge branch kvm-arm64/selftest/irq-injection into kvmarm-master/nextMarc Zyngier
* kvm-arm64/selftest/irq-injection: : . : New tests from Ricardo Koller: : "This series adds a new test, aarch64/vgic-irq, that validates the injection of : different types of IRQs from userspace using various methods and configurations" : . KVM: selftests: aarch64: Add test for restoring active IRQs KVM: selftests: aarch64: Add ISPENDR write tests in vgic_irq KVM: selftests: aarch64: Add tests for IRQFD in vgic_irq KVM: selftests: Add IRQ GSI routing library functions KVM: selftests: aarch64: Add test_inject_fail to vgic_irq KVM: selftests: aarch64: Add tests for LEVEL_INFO in vgic_irq KVM: selftests: aarch64: Level-sensitive interrupts tests in vgic_irq KVM: selftests: aarch64: Add preemption tests in vgic_irq KVM: selftests: aarch64: Cmdline arg to set EOI mode in vgic_irq KVM: selftests: aarch64: Cmdline arg to set number of IRQs in vgic_irq test KVM: selftests: aarch64: Abstract the injection functions in vgic_irq KVM: selftests: aarch64: Add vgic_irq to test userspace IRQ injection KVM: selftests: aarch64: Add vGIC library functions to deal with vIRQ state KVM: selftests: Add kvm_irq_line library function KVM: selftests: aarch64: Add GICv3 register accessor library functions KVM: selftests: aarch64: Add function for accessing GICv3 dist and redist registers KVM: selftests: aarch64: Move gic_v3.h to shared headers Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-01-04KVM: arm64: selftests: get-reg-list: Add pauth configurationMarc Zyngier
The get-reg-list test ignores the Pointer Authentication features, which is a shame now that we have relatively common HW with this feature. Define two new configurations (with and without PMU) that exercise the KVM capabilities. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Link: https://lore.kernel.org/r/20211228121414.1013250-1-maz@kernel.org
2021-12-28KVM: selftests: aarch64: Add test for restoring active IRQsRicardo Koller
Add a test that restores multiple IRQs in active state, it does it by writing into ISACTIVER from the guest and using KVM ioctls. This test tries to emulate what would happen during a live migration: restore active IRQs. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-18-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Add ISPENDR write tests in vgic_irqRicardo Koller
Add injection tests that use writing into the ISPENDR register (to mark IRQs as pending). This is typically used by migration code. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-17-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Add tests for IRQFD in vgic_irqRicardo Koller
Add injection tests for the KVM_IRQFD ioctl into vgic_irq. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-16-ricarkol@google.com
2021-12-28KVM: selftests: Add IRQ GSI routing library functionsRicardo Koller
Add an architecture independent wrapper function for creating and writing IRQ GSI routing tables. Also add a function to add irqchip entries. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-15-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Add test_inject_fail to vgic_irqRicardo Koller
Add tests for failed injections to vgic_irq. This tests that KVM can handle bogus IRQ numbers. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-14-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Add tests for LEVEL_INFO in vgic_irqRicardo Koller
Add injection tests for the LEVEL_INFO ioctl (level-sensitive specific) into vgic_irq. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-13-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Level-sensitive interrupts tests in vgic_irqRicardo Koller
Add a cmdline arg for using level-sensitive interrupts (vs the default edge-triggered). Then move the handler into a generic handler function that takes the type of interrupt (level vs. edge) as an arg. When handling line-sensitive interrupts it sets the line to low after acknowledging the IRQ. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-12-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Add preemption tests in vgic_irqRicardo Koller
Add tests for IRQ preemption (having more than one activated IRQ at the same time). This test injects multiple concurrent IRQs and handles them without handling the actual exceptions. This is done by masking interrupts for the whole test. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-11-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Cmdline arg to set EOI mode in vgic_irqRicardo Koller
Add a new cmdline arg to set the EOI mode for all vgic_irq tests. This specifies whether a write to EOIR will deactivate IRQs or not. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-10-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Cmdline arg to set number of IRQs in vgic_irq testRicardo Koller
Add the ability to specify the number of vIRQs exposed by KVM (arg defaults to 64). Then extend the KVM_IRQ_LINE test by injecting all available SPIs at once (specified by the nr-irqs arg). As a bonus, inject all SGIs at once as well. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-9-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Abstract the injection functions in vgic_irqRicardo Koller
Build an abstraction around the injection functions, so the preparation and checking around the actual injection can be shared between tests. All functions are stored as pointers in arrays of kvm_inject_desc's which include the pointer and what kind of interrupts they can inject. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-8-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Add vgic_irq to test userspace IRQ injectionRicardo Koller
Add a new KVM selftest, vgic_irq, for testing userspace IRQ injection. This particular test injects an SPI using KVM_IRQ_LINE on GICv3 and verifies that the IRQ is handled in the guest. The next commits will add more types of IRQs and different modes. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-7-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Add vGIC library functions to deal with vIRQ stateRicardo Koller
Add a set of library functions for userspace code in selftests to deal with vIRQ state (i.e., ioctl wrappers). Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-6-ricarkol@google.com
2021-12-28KVM: selftests: Add kvm_irq_line library functionRicardo Koller
Add an architecture independent wrapper function for the KVM_IRQ_LINE ioctl. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-5-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Add GICv3 register accessor library functionsRicardo Koller
Add library functions for accessing GICv3 registers: DIR, PMR, CTLR, ISACTIVER, ISPENDR. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-4-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Add function for accessing GICv3 dist and redist ↵Ricardo Koller
registers Add a generic library function for reading and writing GICv3 distributor and redistributor registers. Then adapt some functions to use it; more will come and use it in the next commit. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-3-ricarkol@google.com
2021-12-28KVM: selftests: aarch64: Move gic_v3.h to shared headersRicardo Koller
Move gic_v3.h to the shared headers location. There are some definitions that will be used in the vgic-irq test. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-2-ricarkol@google.com
2021-12-28KVM: selftests: arm64: Add support for various modes with 16kB page sizeMarc Zyngier
The 16kB page size is not a popular choice, due to only a few CPUs actually implementing support for it. However, it can lead to some interesting performance improvements given the right uarch choices. Add support for this page size for various PA/VA combinations. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Link: https://lore.kernel.org/r/20211227124809.1335409-7-maz@kernel.org
2021-12-28KVM: selftests: arm64: Add support for VM_MODE_P36V48_{4K,64K}Marc Zyngier
Some of the arm64 systems out there have an IPA space that is positively tiny. Nonetheless, they make great KVM hosts. Add support for 36bit IPA support with 4kB pages, which makes some of the fruity machines happy. Whilst we're at it, add support for 64kB pages as well, though these boxes have no support for it. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211227124809.1335409-6-maz@kernel.org
2021-12-28KVM: selftests: arm64: Rework TCR_EL1 configurationMarc Zyngier
The current way we initialise TCR_EL1 is a bit cumbersome, as we mix setting TG0 and IPS in the same swtch statement. Split it into two statements (one for the base granule size, and another for the IPA size), allowing new modes to be added in a more elegant way. No functional change intended. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Link: https://lore.kernel.org/r/20211227124809.1335409-5-maz@kernel.org
2021-12-28KVM: selftests: arm64: Check for supported page sizesMarc Zyngier
Just as arm64 implemenations don't necessary support all IPA ranges, they don't all support the same page sizes either. Fun. Create a dummy VM to snapshot the page sizes supported by the host, and filter the supported modes. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Link: https://lore.kernel.org/r/20211227124809.1335409-4-maz@kernel.org
2021-12-28KVM: selftests: arm64: Introduce a variable default IPA sizeMarc Zyngier
Contrary to popular belief, there is no such thing as a default IPA size on arm64. Anything goes, and implementations are the usual Wild West. The selftest infrastructure default to 40bit IPA, which obviously doesn't work for some systems out there. Turn VM_MODE_DEFAULT from a constant into a variable, and let guest_modes_append_default() populate it, depending on what the HW can do. In order to preserve the current behaviour, we still pick 40bits IPA as the default if it is available, and the largest supported IPA space otherwise. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Link: https://lore.kernel.org/r/20211227124809.1335409-3-maz@kernel.org
2021-12-28KVM: selftests: arm64: Initialise default guest mode at test startup timeMarc Zyngier
As we are going to add support for a variable default mode on arm64, let's make sure it is setup first by using a constructor that gets called before the actual test runs. Suggested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Link: https://lore.kernel.org/r/20211227124809.1335409-2-maz@kernel.org
2021-12-20KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest stateSean Christopherson
Add a selftest to attempt to enter L2 with invalid guests state by exiting to userspace via I/O from L2, and then using KVM_SET_SREGS to set invalid guest state (marking TR unusable is arbitrary chosen for its relative simplicity). This is a regression test for a bug introduced by commit c8607e4a086f ("KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry"), which incorrectly set vmx->fail=true when L2 had invalid guest state and ultimately triggered a WARN due to nested_vmx_vmexit() seeing vmx->fail==true while attempting to synthesize a nested VM-Exit. The is also a functional test to verify that KVM sythesizes TRIPLE_FAULT for L2, which is somewhat arbitrary behavior, instead of emulating L2. KVM should never emulate L2 due to invalid guest state, as it's architecturally impossible for L1 to run an L2 guest with invalid state as nested VM-Enter should always fail, i.e. L1 needs to do the emulation. Stuffing state via KVM ioctl() is a non-architctural, out-of-band case, hence the TRIPLE_FAULT being rather arbitrary. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211207193006.120997-5-seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-20selftests: KVM: Fix non-x86 compilingAndrew Jones
Attempting to compile on a non-x86 architecture fails with include/kvm_util.h: In function ‘vm_compute_max_gfn’: include/kvm_util.h:79:21: error: dereferencing pointer to incomplete type ‘struct kvm_vm’ return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1; ^~ This is because the declaration of struct kvm_vm is in lib/kvm_util_internal.h as an effort to make it private to the test lib code. We can still provide arch specific functions, though, by making the generic function symbols weak. Do that to fix the compile error. Fixes: c8cc43c1eae2 ("selftests: KVM: avoid failures due to reserved HyperTransport region") Cc: stable@vger.kernel.org Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20211214151842.848314-1-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-19KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDsVitaly Kuznetsov
Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend on guest visible CPUIDs and (incorrect) KVM logic implementing it is about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden and causes test to fail. Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: feb627e8d6f6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20211216165213.338923-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-10selftests: KVM: Add test to verify KVM doesn't explode on "bad" I/OSean Christopherson
Add an x86 selftest to verify that KVM doesn't WARN or otherwise explode if userspace modifies RCX during a userspace exit to handle string I/O. This is a regression test for a user-triggerable WARN introduced by commit 3b27de271839 ("KVM: x86: split the two parts of emulator_pio_in"). Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211025201311.1881846-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-10selftests: KVM: avoid failures due to reserved HyperTransport regionPaolo Bonzini
AMD proceessors define an address range that is reserved by HyperTransport and causes a failure if used for guest physical addresses. Avoid selftests failures by reserving those guest physical addresses; the rules are: - On parts with <40 bits, its fully hidden from software. - Before Fam17h, it was always 12G just below 1T, even if there was more RAM above this location. In this case we just not use any RAM above 1T. - On Fam17h and later, it is variable based on SME, and is either just below 2^48 (no encryption) or 2^43 (encryption). Fixes: ef4c9f4f6546 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()") Cc: stable@vger.kernel.org Cc: David Matlack <dmatlack@google.com> Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210805105423.412878-1-pbonzini@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Tested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-09KVM: x86: selftests: svm_int_ctl_test: fix intercept calculationMaciej S. Szmigiero
INTERCEPT_x are bit positions, but the code was using the raw value of INTERCEPT_VINTR (4) instead of BIT(INTERCEPT_VINTR). This resulted in masking of bit 2 - that is, SMI instead of VINTR. Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <49b9571d25588870db5380b0be1a41df4bbaaf93.1638486479.git.maciej.szmigiero@oracle.com>
2021-12-02Merge tag 'net-5.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, and wireguard. Mostly scattered driver changes this week, with one big clump in mv88e6xxx. Nothing of note, really. Current release - regressions: - smc: keep smc_close_final()'s error code during active close Current release - new code bugs: - iwlwifi: various static checker fixes (int overflow, leaks, missing error codes) - rtw89: fix size of firmware header before transfer, avoid crash - mt76: fix timestamp check in tx_status; fix pktid leak; - mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set() Previous releases - regressions: - smc: fix list corruption in smc_lgr_cleanup_early - ipv4: convert fib_num_tclassid_users to atomic_t Previous releases - always broken: - tls: fix authentication failure in CCM mode - vrf: reset IPCB/IP6CB when processing outbound pkts, prevent incorrect processing - dsa: mv88e6xxx: fixes for various device errata - rds: correct socket tunable error in rds_tcp_tune() - ipv6: fix memory leak in fib6_rule_suppress - wireguard: reset peer src endpoint when netns exits - wireguard: improve resilience to DoS around incoming handshakes - tcp: fix page frag corruption on page fault which involves TCP - mpls: fix missing attributes in delete notifications - mt7915: fix NULL pointer dereference with ad-hoc mode Misc: - rt2x00: be more lenient about EPROTO errors during start - mlx4_en: update reported link modes for 1/10G" * tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: dsa: b53: Add SPI ID table gro: Fix inconsistent indenting selftests: net: Correct case name net/rds: correct socket tunable error in rds_tcp_tune() mctp: Don't let RTM_DELROUTE delete local routes net/smc: Keep smc_close_final rc during active close ibmvnic: drop bad optimization in reuse_tx_pools() ibmvnic: drop bad optimization in reuse_rx_pools() net/smc: fix wrong list_del in smc_lgr_cleanup_early Fix Comment of ETH_P_802_3_MIN ethernet: aquantia: Try MAC address from device tree ipv4: convert fib_num_tclassid_users to atomic_t net: avoid uninit-value from tcp_conn_request net: annotate data-races on txq->xmit_lock_owner octeontx2-af: Fix a memleak bug in rvu_mbox_init() net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 13:44:45 +0000