aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2023-11-28cxl/region: Fix x1 root-decoder granularity calculationsJim Harris
[ Upstream commit 98a04c7aced2b43b3ac4befe216c4eecc7257d4b ] Root decoder granularity must match value from CFWMS, which may not be the region's granularity for non-interleaved root decoders. So when calculating granularities for host bridge decoders, use the region's granularity instead of the root decoder's granularity to ensure the correct granularities are set for the host bridge decoders and any downstream switch decoders. Test configuration is 1 host bridge * 2 switches * 2 endpoints per switch. Region created with 2048 granularity using following command line: cxl create-region -m -d decoder0.0 -w 4 mem0 mem2 mem1 mem3 \ -g 2048 -s 2048M Use "cxl list -PDE | grep granularity" to get a view of the granularity set at each level of the topology. Before this patch: "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":512, "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":512, "interleave_granularity":256, After: "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":4096, "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":4096, "interleave_granularity":2048, Fixes: 27b3f8d13830 ("cxl/region: Program target lists") Cc: <stable@vger.kernel.org> Signed-off-by: Jim Harris <jim.harris@samsung.com> Link: https://lore.kernel.org/r/169824893473.1403938.16110924262989774582.stgit@bgt-140510-bm03.eng.stellus.in [djbw: fixup the prebuilt cxl_test region] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28tools/testing/cxl: Define a fixed volatile configuration to parseDan Williams
[ Upstream commit 3d8f7ccaa611a743ae3a1e6f605346993d37c513 ] Take two endpoints attached to the first switch on the first host-bridge in the cxl_test topology and define a pre-initialized region. This is a x2 interleave underneath a x1 CXL Window. $ modprobe cxl_test $ # cxl list -Ru { "region":"region3", "resource":"0xf010000000", "size":"512.00 MiB (536.87 MB)", "interleave_ways":2, "interleave_granularity":4096, "decode_state":"commit" } Tested-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/167602000547.1924368.11613151863880268868.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Stable-dep-of: 98a04c7aced2 ("cxl/region: Fix x1 root-decoder granularity calculations") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28selftests/resctrl: Reduce failures due to outliers in MBA/MBM testsIlpo Järvinen
commit ef43c30858754d99373a63dff33280a9969b49bc upstream. The initial value of 5% chosen for the maximum allowed percentage difference between resctrl mbm value and IMC mbm value in commit 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format") was "randomly chosen value" (as admitted by the changelog). When running tests in our lab across a large number platforms, 5% difference upper bound for success seems a bit on the low side for the MBA and MBM tests. Some platforms produce outliers that are slightly above that, typically 6-7%, which leads MBA/MBM test frequently failing. Replace the "randomly chosen value" with a success bound that is based on those measurements across large number of platforms by relaxing the MBA/MBM success bound to 8%. The relaxed bound removes the failures due the frequent outliers. Fixed commit description style error during merge: Shuah Khan <skhan@linuxfoundation.org> Fixes: 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28selftests/resctrl: Move _GNU_SOURCE define into MakefileIlpo Järvinen
commit 3a1e4a91aa454a1c589a9824d54179fdbfccde45 upstream. _GNU_SOURCE is defined in resctrl.h. Defining _GNU_SOURCE has a large impact on what gets defined when including headers either before or after it. This can result in compile failures if .c file decides to include a standard header file before resctrl.h. It is safer to define _GNU_SOURCE in Makefile so it is always defined regardless of in which order includes are done. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28selftests/resctrl: Remove duplicate feature check from CMT testIlpo Järvinen
commit 030b48fb2cf045dead8ee2c5ead560930044c029 upstream. The test runner run_cmt_test() in resctrl_tests.c checks for CMT feature and does not run cmt_resctrl_val() if CMT is not supported. Then cmt_resctrl_val() also check is CMT is supported. Remove the duplicated feature check for CMT from cmt_resctrl_val(). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28perf intel-pt: Fix async branch flagsAdrian Hunter
commit f2d87895cbc4af80649850dcf5da36de6b2ed3dd upstream. Ensure PERF_IP_FLAG_ASYNC is set always for asynchronous branches (i.e. interrupts etc). Fixes: 90e457f7be08 ("perf tools: Add Intel PT support") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20230928072953.19369-1-adrian.hunter@intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28tools/power/turbostat: Enable the C-state Pre-wake printingChen Yu
[ Upstream commit b61b7d8c4c22c4298a50ae5d0ee88facb85ce665 ] Currently the C-state Pre-wake will not be printed due to the probe has not been invoked. Invoke the probe function accordingly. Fixes: aeb01e6d71ff ("tools/power turbostat: Print the C-state Pre-wake settings") Signed-off-by: Chen Yu <yu.c.chen@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28tools/power/turbostat: Fix a knl bugZhang Rui
[ Upstream commit 137f01b3529d292a68d22e9681e2f903c768f790 ] MSR_KNL_CORE_C6_RESIDENCY should be evaluated only if 1. this is KNL platform AND 2. need to get C6 residency or need to calculate C1 residency Fix the broken logic introduced by commit 1e9042b9c8d4 ("tools/power turbostat: Fix CPU%C1 display value"). Fixes: 1e9042b9c8d4 ("tools/power turbostat: Fix CPU%C1 display value") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28selftests/efivarfs: create-read: fix a resource leakzhujun2
[ Upstream commit 3f6f8a8c5e11a9b384a36df4f40f0c9a653b6975 ] The opened file should be closed in main(), otherwise resource leak will occur that this problem was discovered by code reading Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28selftests/lkdtm: Disable CONFIG_UBSAN_TRAP in test configRicardo Cañuelo
[ Upstream commit cf77bf698887c3b9ebed76dea492b07a3c2c7632 ] The lkdtm selftest config fragment enables CONFIG_UBSAN_TRAP to make the ARRAY_BOUNDS test kill the calling process when an out-of-bound access is detected by UBSAN. However, after this [1] commit, UBSAN is triggered under many new scenarios that weren't detected before, such as in struct definitions with fixed-size trailing arrays used as flexible arrays. As a result, CONFIG_UBSAN_TRAP=y has become a very aggressive option to enable except for specific situations. `make kselftest-merge` applies CONFIG_UBSAN_TRAP=y to the kernel config for all selftests, which makes many of them fail because of system hangs during boot. This change removes the config option from the lkdtm kselftest and configures the ARRAY_BOUNDS test to look for UBSAN reports rather than relying on the calling process being killed. [1] commit 2d47c6956ab3 ("ubsan: Tighten UBSAN_BOUNDS on GCC")' Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230802063252.1917997-1-ricardo.canuelo@collabora.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20selftests: pmtu.sh: fix result checkingHangbin Liu
[ Upstream commit 63e201916b27260218e528a2f8758be47f99bbf4 ] In the PMTU test, when all previous tests are skipped and the new test passes, the exit code is set to 0. However, the current check mistakenly treats this as an assignment, causing the check to pass every time. Consequently, regardless of how many tests have failed, if the latest test passes, the PMTU test will report a pass. Fixes: 2a9d3716b810 ("selftests: pmtu.sh: improve the test result processing") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20perf hist: Add missing puts to hist__account_cyclesIan Rogers
[ Upstream commit c1149037f65bcf0334886180ebe3d5efcf214912 ] Caught using reference count checking on perf top with "--call-graph=lbr". After this no memory leaks were detected. Fixes: 57849998e2cd ("perf report: Add processing for cycle histograms") Signed-off-by: Ian Rogers <irogers@google.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: Nick Terrell <terrelln@fb.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: liuwenyu <liuwenyu7@huawei.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20231024222353.3024098-6-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20perf machine: Avoid out of bounds LBR memory readIan Rogers
[ Upstream commit ab8ce150781d326c6bfbe1e09f175ffde1186f80 ] Running perf top with address sanitizer and "--call-graph=lbr" fails due to reading sample 0 when no samples exist. Add a guard to prevent this. Fixes: e2b23483eb1d ("perf machine: Factor out lbr_callchain_add_lbr_ip()") Signed-off-by: Ian Rogers <irogers@google.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: Nick Terrell <terrelln@fb.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: liuwenyu <liuwenyu7@huawei.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20231024222353.3024098-3-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20tools: iio: iio_generic_buffer ensure alignmentMatti Vaittinen
[ Upstream commit 2d3dff577dd0ea8fe9637a13822f7603c4a881c8 ] The iio_generic_buffer can return garbage values when the total size of scan data is not a multiple of the largest element in the scan. This can be demonstrated by reading a scan, consisting, for example of one 4-byte and one 2-byte element, where the 4-byte element is first in the buffer. The IIO generic buffer code does not take into account the last two padding bytes that are needed to ensure that the 4-byte data for next scan is correctly aligned. Add the padding bytes required to align the next sample with the scan size. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: e58537ccce73 ("staging: iio: update example application.") Link: https://lore.kernel.org/r/ZRvlm4ktNLu+qmlf@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20perf record: Fix BTF type checks in the off-cpu profilingNamhyung Kim
[ Upstream commit 0e501a65d35bf72414379fed0e31a0b6b81ab57d ] The BTF func proto for a tracepoint has one more argument than the actual tracepoint function since it has a context argument at the begining. So it should compare to 5 when the tracepoint has 4 arguments. typedef void (*btf_trace_sched_switch)(void *, bool, struct task_struct *, struct task_struct *, unsigned int); Also, recent change in the perf tool would use a hand-written minimal vmlinux.h to generate BTF in the skeleton. So it won't have the info of the tracepoint. Anyway it should use the kernel's vmlinux BTF to check the type in the kernel. Fixes: b36888f71c85 ("perf record: Handle argument change in sched_switch") Reviewed-by: Ian Rogers <irogers@google.com> Acked-by: Song Liu <song@kernel.org> Cc: Hao Luo <haoluo@google.com> CC: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20230922234444.3115821-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20perf kwork: Set ordered_events to true in 'struct perf_tool'Yang Jihong
[ Upstream commit 0c526579a4b2b6ecd540472f2e34c2850cf70f76 ] 'perf kwork' processes data based on timestamps and needs to sort events. Fixes: f98919ec4fccdacf ("perf kwork: Implement 'report' subcommand") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Yang Jihong <yangjihong1@huawei.com> Link: https://lore.kernel.org/r/20230812084917.169338-4-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20perf kwork: Add the supported subcommands to the documentYang Jihong
[ Upstream commit 76e0d8c821bbd952730799cc7af841f9de67b7f7 ] Add missing report, latency and timehist subcommands to the document. Fixes: f98919ec4fccdacf ("perf kwork: Implement 'report' subcommand") Fixes: ad3d9f7a929ab2df ("perf kwork: Implement perf kwork latency") Fixes: bcc8b3e88d6fa1a3 ("perf kwork: Implement perf kwork timehist") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Link: https://lore.kernel.org/r/20230812084917.169338-3-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20perf kwork: Fix incorrect and missing free atom in work_push_atom()Yang Jihong
[ Upstream commit d39710088d82ef100b33cdf4a9de3546fb0bb5df ] 1. Atoms are managed in page mode and should be released using atom_free() instead of free(). 2. When the event does not match, the atom needs to free. Fixes: f98919ec4fccdacf ("perf kwork: Implement 'report' subcommand") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Yang Jihong <yangjihong1@huawei.com> Link: https://lore.kernel.org/r/20230812084917.169338-2-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20perf stat: Fix aggr mode initializationIan Rogers
[ Upstream commit a84fbf205609313594b86065c67e823f09ebe29b ] Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 #12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f454f5668572 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230906003912.3317462-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20selftests/resctrl: Ensure the benchmark commands fits to its arrayIlpo Järvinen
[ Upstream commit 4a28c7665c2a1ac0400864eabb0c641e135f61aa ] Benchmark command is copied into an array in the stack. The array is BENCHMARK_ARGS items long but the command line could try to provide a longer command. Argument size is also fixed by BENCHMARK_ARG_SIZE (63 bytes of space after fitting the terminating \0 character) and user could have inputted argument longer than that. Return error in case the benchmark command does not fit to the space allocated for it. Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20selftests/pidfd: Fix ksft print formatsMaciej Wieczor-Retman
[ Upstream commit 4d7f4e8158b62f63031510cdc24acc520956c091 ] Compiling pidfd selftest after adding a __printf() attribute to ksft_print_msg() and ksft_test_result_pass() exposes -Wformat warnings in error_report(), test_pidfd_poll_exec_thread(), child_poll_exec_test(), test_pidfd_poll_leader_exit_thread(), child_poll_leader_exit_test(). The ksft_test_result_pass() in error_report() expects a string but doesn't provide any argument after the format string. All the other calls to ksft_print_msg() in the functions mentioned above have format strings that don't match with other passed arguments. Fix format specifiers so they match the passed variables. Add a missing variable to ksft_test_result_pass() inside error_report() so it matches other cases in the switch statement. Fixes: 2def297ec7fb ("pidfd: add tests for NSpid info in fdinfo") Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20net: skb_find_text: Ignore patterns extending past 'to'Phil Sutter
[ Upstream commit c4eee56e14fe001e1cff54f0b438a5e2d0dd7454 ] Assume that caller's 'to' offset really represents an upper boundary for the pattern search, so patterns extending past this offset are to be rejected. The old behaviour also was kind of inconsistent when it comes to fragmentation (or otherwise non-linear skbs): If the pattern started in between 'to' and 'from' offsets but extended to the next fragment, it was not found if 'to' offset was still within the current fragment. Test the new behaviour in a kselftest using iptables' string match. Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org> Fixes: f72b948dcbb8 ("[NET]: skb_find_text ignores to argument") Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Florian Westphal <fw@strlen.de> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20selftests: netfilter: test for sctp collision processing in nf_conntrackXin Long
[ Upstream commit cf791b22bef7d9352ff730a8727d3871942d6001 ] This patch adds a test case to reproduce the SCTP DATA chunk retransmission timeout issue caused by the improper SCTP collision processing in netfilter nf_conntrack_proto_sctp. In this test, client sends a INIT chunk, but the INIT_ACK replied from server is delayed until the server sends a INIT chunk to start a new connection from its side. After the connection is complete from server side, the delayed INIT_ACK arrives in nf_conntrack_proto_sctp. The delayed INIT_ACK should be dropped in nf_conntrack_proto_sctp instead of updating the vtag with the out-of-date init_tag, otherwise, the vtag in DATA chunks later sent by client don't match the vtag in the conntrack entry and the DATA chunks get dropped. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Stable-dep-of: c4eee56e14fe ("net: skb_find_text: Ignore patterns extending past 'to'") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20selftests/bpf: Correct map_fd to data_fd in tailcallsLeon Hwang
[ Upstream commit 96daa9874211d5497aa70fa409b67afc29f0cb86 ] Get and check data_fd. It should not check map_fd again. Meanwhile, correct some 'return' to 'goto out'. Thank the suggestion from Maciej in "bpf, x64: Fix tailcall infinite loop"[0] discussions. [0] https://lore.kernel.org/bpf/e496aef8-1f80-0f8e-dcdd-25a8c300319a@gmail.com/T/#m7d3b601066ba66400d436b7e7579b2df4a101033 Fixes: 79d49ba048ec ("bpf, testing: Add various tail call test cases") Fixes: 3b0379111197 ("selftests/bpf: Add tailcall_bpf2bpf tests") Fixes: 5e0b0a4c52d3 ("selftests/bpf: Test tail call counting with bpf2bpf and data on stack") Signed-off-by: Leon Hwang <hffilwlqm@gmail.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230906154256.95461-1-hffilwlqm@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20objtool: Propagate early errorsAaron Plattner
[ Upstream commit e959c279d391c10b35ce300fb4b0fe3b98e86bd2 ] If objtool runs into a problem that causes it to exit early, the overall tool still returns a status code of 0, which causes the build to continue as if nothing went wrong. Note this only affects early errors, as later errors are still ignored by check(). Fixes: b51277eb9775 ("objtool: Ditch subcommands") Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Link: https://lore.kernel.org/r/cb6a28832d24b2ebfafd26da9abb95f874c83045.1696355111.git.aplattner@nvidia.com Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08perf evlist: Avoid frequency mode for the dummy eventIan Rogers
[ Upstream commit f9cdeb58a9cf46c09b56f5f661ea8da24b6458c3 ] Dummy events are created with an attribute where the period and freq are zero. evsel__config will then see the uninitialized values and initialize them in evsel__default_freq_period. As fequency mode is used by default the dummy event would be set to use frequency mode. However, this has no effect on the dummy event but does cause unnecessary timers/interrupts. Avoid this overhead by setting the period to 1 for dummy events. evlist__add_aux_dummy calls evlist__add_dummy then sets freq=0 and period=1. This isn't necessary after this change and so the setting is removed. From Stephane: The dummy event is not counting anything. It is used to collect mmap records and avoid a race condition during the synthesize mmap phase of perf record. As such, it should not cause any overhead during active profiling. Yet, it did. Because of a bug the dummy event was programmed as a sampling event in frequency mode. Events in that mode incur more kernel overheads because on timer tick, the kernel has to look at the number of samples for each event and potentially adjust the sampling period to achieve the desired frequency. The dummy event was therefore adding a frequency event to task and ctx contexts we may otherwise not have any, e.g., perf record -a -e cpu/event=0x3c,period=10000000/. On each timer tick the perf_adjust_freq_unthr_context() is invoked and if ctx->nr_freq is non-zero, then the kernel will loop over ALL the events of the context looking for frequency mode ones. In doing, so it locks the context, and enable/disable the PMU of each hw event. If all the events of the context are in period mode, the kernel will have to traverse the list for nothing incurring overhead. The overhead is multiplied by a very large factor when this happens in a guest kernel. There is no need for the dummy event to be in frequency mode, it does not count anything and therefore should not cause extra overhead for no reason. Fixes: 5bae0250237f ("perf evlist: Introduce perf_evlist__new_dummy constructor") Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230916035640.1074422-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08netfilter: nf_tables: audit log object reset once per tablePhil Sutter
[ Upstream commit 1baf0152f7707c6c7e4ea815dcc1f431c0e603f9 ] When resetting multiple objects at once (via dump request), emit a log message per table (or filled skb) and resurrect the 'entries' parameter to contain the number of objects being logged for. To test the skb exhaustion path, perform some bulk counter and quota adds in the kselftest. Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> (Audit) Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-02objtool/x86: add missing embedded_insn checkJohn Sperbeck
When dbf460087755 ("objtool/x86: Fixup frame-pointer vs rethunk") was backported to some stable branches, the check for dest->embedded_insn in is_special_call() was missed. The result is that the warning it was intended to suppress still appears. For example on 6.1 (on kernels before 6.1, the '-s' argument would instead be 'check'): $ tools/objtool/objtool -s arch/x86/lib/retpoline.o arch/x86/lib/retpoline.o: warning: objtool: srso_untrain_ret+0xd: call without frame pointer save/setup With this patch, the warning is correctly suppressed, and the kernel still passes the normal Google kernel developer tests. Signed-off-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-02maple_tree: add GFP_KERNEL to allocations in mas_expected_entries()Liam R. Howlett
commit 099d7439ce03d0e7bc8f0c3d7878b562f3a48d3d upstream. Users complained about OOM errors during fork without triggering compaction. This can be fixed by modifying the flags used in mas_expected_entries() so that the compaction will be triggered in low memory situations. Since mas_expected_entries() is only used during fork, the extra argument does not need to be passed through. Additionally, the two test_maple_tree test cases and one benchmark test were altered to use the correct locking type so that allocations would not trigger sleeping and thus fail. Testing was completed with lockdep atomic sleep detection. The additional locking change requires rwsem support additions to the tools/ directory through the use of pthreads pthread_rwlock_t. With this change test_maple_tree works in userspace, as a module, and in-kernel. Users may notice that the system gave up early on attempting to start new processes instead of attempting to reclaim memory. Link: https://lkml.kernel.org/r/20230915093243epcms1p46fa00bbac1ab7b7dca94acb66c44c456@epcms1p4 Link: https://lkml.kernel.org/r/20231012155233.2272446-1-Liam.Howlett@oracle.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Peng Zhang <zhangpeng.00@bytedance.com> Cc: <jason.sim@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25selftests: mptcp: join: no RST when rm subflow/addrMatthieu Baerts
commit 2cfaa8b3b7aece3c7b13dd10db20dcea65875692 upstream. Recently, we noticed that some RST were wrongly generated when removing the initial subflow. This patch makes sure RST are not sent when removing any subflows or any addresses. Fixes: c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25selftests: mptcp: join: correctly check for no RSTMatthieu Baerts
commit b134a5805455d1886662a6516c965cdb9df9fbcc upstream. The commit mentioned below was more tolerant with the number of RST seen during a test because in some uncontrollable situations, multiple RST can be generated. But it was not taking into account the case where no RST are expected: this validation was then no longer reporting issues for the 0 RST case because it is not possible to have less than 0 RST in the counter. This patch fixes the issue by adding a specific condition. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25selftests/ftrace: Add new test case which checks non unique symbolFrancis Laniel
commit 03b80ff8023adae6780e491f66e932df8165e3a0 upstream. If name_show() is non unique, this test will try to install a kprobe on this function which should fail returning EADDRNOTAVAIL. On kernel where name_show() is not unique, this test is skipped. Link: https://lore.kernel.org/all/20231020104250.9537-3-flaniel@linux.microsoft.com/ Cc: stable@vger.kernel.org Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25selftests: openvswitch: Add version check for pyroute2Aaron Conole
[ Upstream commit 92e37f20f20a23fec4626ae72eda50f127acb130 ] Paolo Abeni reports that on some systems the pyroute2 version isn't new enough to run the test suite. Ensure that we support a minimum version of 0.6 for all cases (which does include the existing ones). The 0.6.1 version was released in May of 2021, so should be propagated to most installations at this point. The alternative that Paolo proposed was to only skip when the add-flow is being run. This would be okay for most cases, except if a future test case is added that needs to do flow dump without an associated add (just guessing). In that case, it could also be broken and we would need additional skip logic anyway. Just draw a line in the sand now. Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite") Reported-by: Paolo Abeni <pabeni@redhat.com> Closes: https://lore.kernel.org/lkml/8470c431e0930d2ea204a9363a60937289b7fdbe.camel@redhat.com/ Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and ↵Juntong Deng
hugetlb_reparenting_test.sh that may cause error [ Upstream commit bbe246f875d064ecfb872fe4f66152e743dfd22d ] According to the awk manual, the -e option does not need to be specified in front of 'program' (unless you need to mix program-file). The redundant -e option can cause error when users use awk tools other than gawk (for example, mawk does not support the -e option). Error Example: awk: not an option: -e Link: https://lkml.kernel.org/r/VI1P193MB075228810591AF2FDD7D42C599C3A@VI1P193MB0752.EURP193.PROD.OUTLOOK.COM Signed-off-by: Juntong Deng <juntong.deng@outlook.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25selftests: netfilter: Run nft_audit.sh in its own netnsPhil Sutter
commit 2e2d9c7d4d37d74873583d7b0c94eac8b6869486 upstream. Don't mess with the host's firewall ruleset. Since audit logging is not per-netns, add an initial delay of a second so other selftests' netns cleanups have a chance to finish. Fixes: e8dbde59ca3f ("selftests: netfilter: Test nf_tables audit logging") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25selftests: openvswitch: Catch cases where the tests are killedAaron Conole
commit af846afad5ca1c1a24d320adf9e48255e97db84e upstream. In case of fatal signal, or early abort at least cleanup the current test case. Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite") Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10netfilter: nf_tables: Deduplicate nft_register_obj audit logsPhil Sutter
[ Upstream commit 0d880dc6f032e0b541520e9926f398a77d3d433c ] When adding/updating an object, the transaction handler emits suitable audit log entries already, the one in nft_obj_notify() is redundant. To fix that (and retain the audit logging from objects' 'update' callback), Introduce an "audit log free" variant for internal use. Fixes: c520292f29b8 ("audit: log nftables configuration change events once per table") Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> (Audit) Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10selftests: netfilter: Extend nft_audit.shPhil Sutter
[ Upstream commit 203bb9d39866d3c5a8135433ce3742fe4f9d5741 ] Add tests for sets and elements and deletion of all kinds. Also reorder rule reset tests: By moving the bulk rule add command up, the two 'reset rules' tests become identical. While at it, fix for a failing bulk rule add test's error status getting lost due to its use in a pipe. Avoid this by using a temporary file. Headings in diff output for failing tests contain no useful data, strip them. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Florian Westphal <fw@strlen.de> Stable-dep-of: 0d880dc6f032 ("netfilter: nf_tables: Deduplicate nft_register_obj audit logs") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10selftests: netfilter: Test nf_tables audit loggingPhil Sutter
[ Upstream commit e8dbde59ca3fe925d0105bfb380e8429928b16dd ] Compare NETFILTER_CFG type audit logs emitted from kernel upon ruleset modifications against expected output. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Stable-dep-of: 0d880dc6f032 ("netfilter: nf_tables: Deduplicate nft_register_obj audit logs") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookupMartin KaFai Lau
[ Upstream commit 31de4105f00d64570139bc5494a201b0bd57349f ] The bpf_fib_lookup() also looks up the neigh table. This was done before bpf_redirect_neigh() was added. In the use case that does not manage the neigh table and requires bpf_fib_lookup() to lookup a fib to decide if it needs to redirect or not, the bpf prog can depend only on using bpf_redirect_neigh() to lookup the neigh. It also keeps the neigh entries fresh and connected. This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid the double neigh lookup when the bpf prog always call bpf_redirect_neigh() to do the neigh lookup. The params->smac output is skipped together when SKIP_NEIGH is set because bpf_redirect_neigh() will figure out the smac also. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev Stable-dep-of: 5baa0433a15e ("neighbour: fix data-races around n->output") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06bpf: Fix BTF_ID symbol generation collision in tools/Nick Desaulniers
commit c0bb9fb0e52a64601d38b3739b729d9138d4c8a1 upstream. Marcus and Satya reported an issue where BTF_ID macro generates same symbol in separate objects and that breaks final vmlinux link. ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol '__BTF_ID__struct__cgroup__624' is already defined This can be triggered under specific configs when __COUNTER__ happens to be the same for the same symbol in two different translation units, which is already quite unlikely to happen. Add __LINE__ number suffix to make BTF_ID symbol more unique, which is not a complete fix, but it would help for now and meanwhile we can work on better solution as suggested by Andrii. Cc: stable@vger.kernel.org Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com> Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com> Closes: https://github.com/ClangBuiltLinux/linux/issues/1913 Debugged-by: Nathan Chancellor <nathan@kernel.org> Co-developed-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/ Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-2-263fc519c21f@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-06perf build: Define YYNOMEM as YYNOABORT for bison < 3.81Arnaldo Carvalho de Melo
[ Upstream commit 88cc47e24597971b05b6e94c28a2fc81d2a8d61a ] YYNOMEM was introduced in bison 3.81, so define it as YYABORT for older versions, which should provide the previous perf behaviour. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06memblock tests: fix warning ‘struct seq_file’ declared inside parameter listMike Rapoport (IBM)
[ Upstream commit 55122e0130e51eb71f5ec62d10525db0468f28e8 ] Building memblock tests produces the following warning: cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c In file included from tests/common.h:9, from tests/basic_api.h:5, from main.c:2: ./linux/memblock.h:601:50: warning: ‘struct seq_file’ declared inside parameter list will not be visible outside of this definition or declaration 601 | static inline void memtest_report_meminfo(struct seq_file *m) { } | ^~~~~~~~ Add declaration of 'struct seq_file' to tools/include/linux/seq_file.h to fix it. Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06memblock tests: fix warning: "__ALIGN_KERNEL" redefinedMike Rapoport (IBM)
[ Upstream commit 5e1bffbdb63baf89f3bf0b6bafb50903432a7434 ] Building memblock tests produces the following warning: cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c In file included from ../../include/linux/pfn.h:5, from ./linux/memory_hotplug.h:6, from ./linux/init.h:7, from ./linux/memblock.h:11, from tests/common.h:8, from tests/basic_api.h:5, from main.c:2: ../../include/linux/mm.h:14: warning: "__ALIGN_KERNEL" redefined 14 | #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1) | In file included from ../../include/linux/mm.h:6, from ../../include/linux/pfn.h:5, from ./linux/memory_hotplug.h:6, from ./linux/init.h:7, from ./linux/memblock.h:11, from tests/common.h:8, from tests/basic_api.h:5, from main.c:2: ../../include/uapi/linux/const.h:31: note: this is the location of the previous definition 31 | #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1) | Remove definitions of __ALIGN_KERNEL and __ALIGN_KERNEL_MASK from tools/include/linux/mm.h to fix it. Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06bpf: Clarify error expectations from bpf_clone_redirectStanislav Fomichev
[ Upstream commit 7cb779a6867fea00b4209bcf6de2f178a743247d ] Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped packets") exposed the fact that bpf_clone_redirect is capable of returning raw NET_XMIT_XXX return codes. This is in the conflict with its UAPI doc which says the following: "0 on success, or a negative error in case of failure." Update the UAPI to reflect the fact that bpf_clone_redirect can return positive error numbers, but don't explicitly define their meaning. Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06selftests: fix dependency checker scriptRicardo B. Marliere
[ Upstream commit 5f9dd2e896a91bfca90f8463eb6808c03d535d8a ] This patch fixes inconsistencies in the parsing rules of the levels 1 and 2 of the kselftest_deps.sh. It was added the levels 4 and 5 to account for a few edge cases that are present in some tests, also some minor identation styling have been fixed (s/ /\t/g). Signed-off-by: Ricardo B. Marliere <rbmarliere@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06selftests/ftrace: Correctly enable event in instance-event.tcZheng Yejian
[ Upstream commit f4e4ada586995b17f828c6d147d1800eb1471450 ] Function instance_set() expects to enable event 'sched_switch', so we should set 1 to its 'enable' file. Testcase passed after this patch: # ./ftracetest test.d/instances/instance-event.tc === Ftrace unit tests === [1] Test creation and deletion of trace instances while setting an event [PASS] # of passed: 1 # of failed: 0 # of unresolved: 0 # of untested: 0 # of unsupported: 0 # of xfailed: 0 # of undefined(test bug): 0 Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06selftests/powerpc: Fix emit_tests to work with run_kselftest.shMichael Ellerman
[ Upstream commit 58b33e78a31782ffe25d404d5eba9a45fe636e27 ] In order to use run_kselftest.sh the list of tests must be emitted to populate kselftest-list.txt. The powerpc Makefile is written to use EMIT_TESTS. But support for EMIT_TESTS was dropped in commit d4e59a536f50 ("selftests: Use runner.sh for emit targets"). Although prior to that commit a548de0fe8e1 ("selftests: lib.mk: add test execute bit check to EMIT_TESTS") had already broken run_kselftest.sh for powerpc due to the executable check using the wrong path. It can be fixed by replacing the EMIT_TESTS definitions with actual emit_tests rules in the powerpc Makefiles. This makes run_kselftest.sh able to run powerpc tests: $ cd linux $ export ARCH=powerpc $ export CROSS_COMPILE=powerpc64le-linux-gnu- $ make headers $ make -j -C tools/testing/selftests install $ grep -c "^powerpc" tools/testing/selftests/kselftest_install/kselftest-list.txt 182 Fixes: d4e59a536f50 ("selftests: Use runner.sh for emit targets") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230921072623.828772-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06selftests/powerpc: Pass make context to childrenBenjamin Gray
[ Upstream commit 4ecd0868c5138238dec8a1549bb6ff8e5b48208b ] Make supports passing the 'jobserver' (parallel make support) to child invocations of make when either 1. The target command uses $(MAKE) directly 2. The command starts with '+' This context is not passed through expansions that result in $(MAKE), so the macros used in several places fail to pass on the jobserver context. Warnings are also raised by the child mentioning this. Prepend macros lines that invoke $(MAKE) with '+' to allow passing the jobserver context to these children. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230228000709.124727-3-bgray@linux.ibm.com Stable-dep-of: 58b33e78a317 ("selftests/powerpc: Fix emit_tests to work with run_kselftest.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06selftests/powerpc: Use CLEAN macro to fix make warningBenjamin Gray
[ Upstream commit 69608683a65be5322ef44091eaeb9890472b2eea ] The CLEAN macro was added in 337f1e36 to prevent the Makefile:50: warning: overriding recipe for target 'clean' ../../lib.mk:124: warning: ignoring old recipe for target 'clean' style warnings. Expand it's use to fix another case of redefining a target directly. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230228000709.124727-2-bgray@linux.ibm.com Stable-dep-of: 58b33e78a317 ("selftests/powerpc: Fix emit_tests to work with run_kselftest.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 04:22:45 +0000