aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2022-01-28selftests: kvm: check dynamic bits against KVM_X86_XCOMP_GUEST_SUPPPaolo Bonzini
Provide coverage for the new API. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-26selftests: kvm: move vm_xsave_req_perm call to amx_testPaolo Bonzini
There is no need for tests other than amx_test to enable dynamic xsave states. Remove the call to vm_xsave_req_perm from generic code, and move it inside the test. While at it, allow customizing the bit that is requested, so that future tests can use it differently. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-26KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guestSean Christopherson
Don't skip the vmcall() in l2_guest_code() prior to re-entering L2, doing so will result in L2 running to completion, popping '0' off the stack for RET, jumping to address '0', and ultimately dying with a triple fault shutdown. It's not at all obvious why the test re-enters L2 and re-executes VMCALL, but presumably it serves a purpose. The VMX path doesn't skip vmcall(), and the test can't possibly have passed on SVM, so just do what VMX does. Fixes: d951b2210c1a ("KVM: selftests: smm_test: Test SMM enter from L2") Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220125221725.2101126-1-seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-25KVM: selftests: Re-enable access_tracking_perf_testDavid Matlack
This selftest was accidentally removed by commit 6a58150859fd ("selftest: KVM: Add intra host migration tests"). Add it back. Fixes: 6a58150859fd ("selftest: KVM: Add intra host migration tests") Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20220120003826.2805036-1-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-20selftests: kvm/x86: Fix the warning in lib/x86_64/processor.cJinrong Liang
The following warning appears when executing make -C tools/testing/selftests/kvm include/x86_64/processor.h:290:2: warning: 'ecx' may be used uninitialized in this function [-Wmaybe-uninitialized] asm volatile("cpuid" ^~~ lib/x86_64/processor.c:1523:21: note: 'ecx' was declared here uint32_t eax, ebx, ecx, edx, max_ext_leaf; Just initialize ecx to remove this warning. Fixes: c8cc43c1eae2 ("selftests: KVM: avoid failures due to reserved HyperTransport region") Signed-off-by: Jinrong Liang <cloudliang@tencent.com> Message-Id: <20220119140325.59369-1-cloudliang@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-20selftests: kvm/x86: Fix the warning in pmu_event_filter_test.cJinrong Liang
The following warning appears when executing make -C tools/testing/selftests/kvm x86_64/pmu_event_filter_test.c: In function 'vcpu_supports_intel_br_retired': x86_64/pmu_event_filter_test.c:241:28: warning: variable 'cpuid' set but not used [-Wunused-but-set-variable] 241 | struct kvm_cpuid2 *cpuid; | ^~~~~ x86_64/pmu_event_filter_test.c: In function 'vcpu_supports_amd_zen_br_retired': x86_64/pmu_event_filter_test.c:258:28: warning: variable 'cpuid' set but not used [-Wunused-but-set-variable] 258 | struct kvm_cpuid2 *cpuid; | ^~~~~ Just delete the unused variables to stay away from warnings. Fixes: dc7e75b3b3ee ("selftests: kvm/x86: Add test for KVM_SET_PMU_EVENT_FILTER") Signed-off-by: Jinrong Liang <cloudliang@tencent.com> Message-Id: <20220119133910.56285-1-cloudliang@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19kvm: selftests: Do not indent with spacesPaolo Bonzini
Some indentation with spaces crept in, likely due to terminal-based cut and paste. Clean it up. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19kvm: selftests: sync uapi/linux/kvm.h with Linux headerPaolo Bonzini
KVM_CAP_XSAVE2 is out of sync due to a conflict. Copy the whole file while at it. Reported-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19selftests: kvm: add amx_test to .gitignoreMuhammad Usama Anjum
amx_test's binary should be present in the .gitignore file for the git to ignore it. Fixes: bf70636d9443 ("selftest: kvm: Add amx selftest") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Message-Id: <20220118122053.1941915-1-usama.anjum@collabora.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19Merge branch 'kvm-pi-raw-spinlock' into HEADPaolo Bonzini
Bring in fix for VT-d posted interrupts before further changing the code in 5.17. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19KVM: selftests: Add a test to force emulation with a pending exceptionSean Christopherson
Add a VMX specific test to verify that KVM doesn't explode if userspace attempts KVM_RUN when emulation is required with a pending exception. KVM VMX's emulation support for !unrestricted_guest punts exceptions to userspace instead of attempting to synthesize the exception with all the correct state (and stack switching, etc...). Punting is acceptable as there's never been a request to support injecting exceptions when emulating due to invalid state, but KVM has historically assumed that userspace will do the right thing and either clear the exception or kill the guest. Deliberately do the opposite and attempt to re-enter the guest with a pending exception and emulation required to verify KVM continues to punt the combination to userspace, e.g. doesn't explode, WARN, etc... Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211228232437.1875318-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19selftests: kvm/x86: Add test for KVM_SET_PMU_EVENT_FILTERJim Mattson
Verify that the PMU event filter works as expected. Note that the virtual PMU doesn't work as expected on AMD Zen CPUs (an intercepted rdmsr is counted as a retired branch instruction), but the PMU event filter does work. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220115052431.447232-7-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19selftests: kvm/x86: Introduce x86_model()Jim Mattson
Extract the x86 model number from CPUID.01H:EAX. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220115052431.447232-6-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19selftests: kvm/x86: Export x86_family() for use outside of processor.cJim Mattson
Move this static inline function to processor.h, so that it can be used in individual tests, as needed. Opportunistically replace the bare 'unsigned' with 'unsigned int.' Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220115052431.447232-5-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19selftests: kvm/x86: Introduce is_amd_cpu()Jim Mattson
Replace the one ad hoc "AuthenticAMD" CPUID vendor string comparison with a new function, is_amd_cpu(). Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220115052431.447232-4-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19selftests: kvm/x86: Parameterize the CPUID vendor string checkJim Mattson
Refactor is_intel_cpu() to make it easier to reuse the bulk of the code for other vendors in the future. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220115052431.447232-3-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19kvm: selftests: conditionally build vm_xsave_req_perm()Wei Wang
vm_xsave_req_perm() is currently defined and used by x86_64 only. Make it compiled into vm_create_with_vcpus() only when on x86_64 machines. Otherwise, it would cause linkage errors, e.g. on s390x. Fixes: 415a3c33e8 ("kvm: selftests: Add support for KVM_CAP_XSAVE2") Reported-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Tested-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Message-Id: <20220118014817.30910-1-wei.w.wang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-17KVM: selftests: Test KVM_SET_CPUID2 after KVM_RUNVitaly Kuznetsov
KVM forbids KVM_SET_CPUID2 after KVM_RUN was performed on a vCPU unless the supplied CPUID data is equal to what was previously set. Test this. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220117150542.2176196-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-17KVM: selftests: Rename 'get_cpuid_test' to 'cpuid_test'Vitaly Kuznetsov
In preparation to reusing the existing 'get_cpuid_test' for testing "KVM_SET_CPUID{,2} after KVM_RUN" rename it to 'cpuid_test' to avoid the confusion. No functional change intended. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220117150542.2176196-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-14selftest: kvm: Add amx selftestYang Zhong
This selftest covers two aspects of AMX. The first is triggering #NM exception and checking the MSR XFD_ERR value. The second case is loading tile config and tile data into guest registers and trapping to the host side for a complete save/load of the guest state. TMM0 is also checked against memory data after save/restore. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20211223145322.2914028-4-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-14selftest: kvm: Move struct kvm_x86_state to headerYang Zhong
Those changes can avoid dereferencing pointer compile issue when amx_test.c reference state->xsave. Move struct kvm_x86_state definition to processor.h. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20211223145322.2914028-3-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-14selftest: kvm: Reorder vcpu_load_state steps for AMXPaolo Bonzini
For AMX support it is recommended to load XCR0 after XFD, so that KVM does not see XFD=0, XCR=1 for a save state that will eventually be disabled (which would lead to premature allocation of the space required for that save state). It is also required to load XSAVE data after XCR0 and XFD, so that KVM can trigger allocation of the extra space required to store AMX state. Adjust vcpu_load_state to obey these new requirements. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20211223145322.2914028-2-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-14kvm: selftests: Add support for KVM_CAP_XSAVE2Wei Wang
When KVM_CAP_XSAVE2 is supported, userspace is expected to allocate buffer for KVM_GET_XSAVE2 and KVM_SET_XSAVE using the size returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2). Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Guang Zeng <guang.zeng@intel.com> Signed-off-by: Jing Liu <jing2.liu@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-20-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-09Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Revert "libtraceevent: Increase libtraceevent logging when verbose", breaks the build with libtraceevent-1.3.0, i.e. when building with 'LIBTRACEEVENT_DYNAMIC=1'. - Avoid early exit in 'perf trace' due to running SIGCHLD handler before it makes sense to. It can happen when using a BPF source code event that have to be first built into an object file. * tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: Revert "libtraceevent: Increase libtraceevent logging when verbose" perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to
2022-01-07Revert "libtraceevent: Increase libtraceevent logging when verbose"Arnaldo Carvalho de Melo
This reverts commit 08efcb4a638d260ef7fcbae64ecf7ceceb3f1841. This breaks the build as it will prefer using libbpf-devel header files, even when not using LIBBPF_DYNAMIC=1, breaking the build. This was detected on OpenSuSE Tumbleweed with libtraceevent-devel 1.3.0, as described by Jiri Slaby: ======================================================================= It breaks build with LIBTRACEEVENT_DYNAMIC and version 1.3.0: > util/debug.c: In function ‘perf_debug_option’: > util/debug.c:243:17: error: implicit declaration of function ‘tep_set_loglevel’ [-Werror=implicit-function-declaration] > 243 | tep_set_loglevel(TEP_LOG_INFO); > | ^~~~~~~~~~~~~~~~ > util/debug.c:243:34: error: ‘TEP_LOG_INFO’ undeclared (first use in this function); did you mean ‘TEP_PRINT_INFO’? > 243 | tep_set_loglevel(TEP_LOG_INFO); > | ^~~~~~~~~~~~ > | TEP_PRINT_INFO > util/debug.c:243:34: note: each undeclared identifier is reported only once for each function it appears in > util/debug.c:245:34: error: ‘TEP_LOG_DEBUG’ undeclared (first use in this function) > 245 | tep_set_loglevel(TEP_LOG_DEBUG); > | ^~~~~~~~~~~~~ > util/debug.c:247:34: error: ‘TEP_LOG_ALL’ undeclared (first use in this function) > 247 | tep_set_loglevel(TEP_LOG_ALL); > | ^~~~~~~~~~~ It is because the gcc's command line looks like: gcc ... -I/home/abuild/rpmbuild/BUILD/tools/lib/ ... -DLIBTRACEEVENT_VERSION=65790 ... ======================================================================= The proper way to fix this is more involved and so not suitable for this late in the 5.16-rc stage. Reported-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/lkml/bc2b0786-8965-1bcd-2316-9d9bb37b9c31@kernel.org Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: https://lore.kernel.org/lkml/YddGjjmlMZzxUZbN@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-07perf trace: Avoid early exit due to running SIGCHLD handler before it makes ↵Jiri Olsa
sense to When running 'perf trace' with an BPF object like: # perf trace -e openat,tools/perf/examples/bpf/hello.c the event parsing eventually calls llvm__get_kbuild_opts() that runs a script and that ends up with SIGCHLD delivered to the 'perf trace' handler, which assumes the workload process is done and quits 'perf trace'. Move the SIGCHLD handler setup directly to trace__run(), where the event is parsed and the object is already compiled. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Christy Lee <christyc.y.lee@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220106222030.227499-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-07kvm: selftests: move ucall declarations into ucall_common.hMichael Roth
Now that core kvm_util declarations have special home in kvm_util_base.h, move ucall-related declarations out into a separate header. Signed-off-by: Michael Roth <michael.roth@amd.com> Message-Id: <20211210164620.11636-3-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07kvm: selftests: move base kvm_util.h declarations to kvm_util_base.hMichael Roth
Between helper macros and interfaces that will be introduced in subsequent patches, much of kvm_util.h would end up being declarations specific to ucall. Ideally these could be separated out into a separate header since they are not strictly required for writing guest tests and are mostly self-contained interfaces other than a reliance on a few core declarations like struct kvm_vm. This doesn't make a big difference as far as how tests will be compiled/written since all these interfaces will still be packaged up into a single/common libkvm.a used by all tests, but it is still nice to be able to compartmentalize to improve readabilty and reduce merge conflicts in the future for common tasks like adding new interfaces to kvm_util.h. Furthermore, some of the ucall declarations will be arch-specific, requiring various #ifdef'ery in kvm_util.h. Ideally these declarations could live in separate arch-specific headers, e.g. include/<arch>/ucall.h, which would handle arch-specific declarations as well as pulling in common ucall-related declarations shared by all archs. One simple way to do this would be to #include ucall.h at the bottom of kvm_util.h, after declarations it relies upon like struct kvm_vm. This is brittle however, and doesn't scale easily to other sets of interfaces that may be added in the future. Instead, move all declarations currently in kvm_util.h into kvm_util_base.h, then have kvm_util.h #include it. With this change, non-base declarations can be selectively moved/introduced into separate headers, which can then be included in kvm_util.h so that individual tests don't need to be touched. Subsequent patches will then move ucall-related declarations into a separate header to meet the above goals. Signed-off-by: Michael Roth <michael.roth@amd.com> Message-Id: <20211210164620.11636-2-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07KVM: x86/xen: Add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel deliveryDavid Woodhouse
This adds basic support for delivering 2 level event channels to a guest. Initially, it only supports delivery via the IRQ routing table, triggered by an eventfd. In order to do so, it has a kvm_xen_set_evtchn_fast() function which will use the pre-mapped shared_info page if it already exists and is still valid, while the slow path through the irqfd_inject workqueue will remap the shared_info page if necessary. It sets the bits in the shared_info page but not the vcpu_info; that is deferred to __kvm_xen_has_interrupt() which raises the vector to the appropriate vCPU. Add a 'verbose' mode to xen_shinfo_test while adding test cases for this. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-5-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07selftests: KVM: sev_migrate_tests: Add mirror command testsPeter Gonda
Add tests to confirm mirror vms can only run correct subset of commands. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by: Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-4-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07selftests: KVM: sev_migrate_tests: Fix sev_ioctl()Peter Gonda
TEST_ASSERT in SEV ioctl was allowing errors because it checked return value was good OR the FW error code was OK. This TEST_ASSERT should require both (aka. AND) values are OK. Removes the LAUNCH_START from the mirror VM because this call correctly fails because mirror VMs cannot call this command. Currently issues with the PSP driver functions mean the firmware error is not always reset to SEV_RET_SUCCESS when a call is successful. Mainly sev_platform_init() doesn't correctly set the fw error if the platform has already been initialized. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by: Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-3-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07selftests: KVM: sev_migrate_tests: Fix test_sev_mirror()Peter Gonda
Mirrors should not be able to call LAUNCH_START. Remove the call on the mirror to correct the test before fixing sev_ioctl() to correctly assert on this failed ioctl. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by: Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-2-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07Merge tag 'kvm-riscv-5.17-1' of https://github.com/kvm-riscv/linux into HEADPaolo Bonzini
KVM/riscv changes for 5.17, take #1 - Use common KVM implementation of MMU memory caches - SBI v0.2 support for Guest - Initial KVM selftests support - Fix to avoid spurious virtual interrupts after clearing hideleg CSR - Update email address for Anup and Atish
2022-01-07Merge tag 'kvmarm-5.17' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.16 - Simplification of the 'vcpu first run' by integrating it into KVM's 'pid change' flow - Refactoring of the FP and SVE state tracking, also leading to a simpler state and less shared data between EL1 and EL2 in the nVHE case - Tidy up the header file usage for the nvhe hyp object - New HYP unsharing mechanism, finally allowing pages to be unmapped from the Stage-1 EL2 page-tables - Various pKVM cleanups around refcounting and sharing - A couple of vgic fixes for bugs that would trigger once the vcpu xarray rework is merged, but not sooner - Add minimal support for ARMv8.7's PMU extension - Rework kvm_pgtable initialisation ahead of the NV work - New selftest for IRQ injection - Teach selftests about the lack of default IPA space and page sizes - Expand sysreg selftest to deal with Pointer Authentication - The usual bunch of cleanups and doc update
2022-01-06selftests: cgroup: Test open-time cgroup namespace usage for migration checksTejun Heo
When a task is writing to an fd opened by a different task, the perm check should use the cgroup namespace of the latter task. Add a test for it. Tested-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2022-01-06selftests: cgroup: Test open-time credential usage for migration checksTejun Heo
When a task is writing to an fd opened by a different task, the perm check should use the credentials of the latter task. Add a test for it. Tested-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2022-01-06selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644Tejun Heo
0644 is an odd perm to create a cgroup which is a directory. Use the regular 0755 instead. This is necessary for euid switching test case. Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2022-01-06KVM: selftests: Add initial support for RISC-V 64-bitAnup Patel
We add initial support for RISC-V 64-bit in KVM selftests using which we can cross-compile and run arch independent tests such as: demand_paging_test dirty_log_test kvm_create_max_vcpus, kvm_page_table_test set_memory_region_test kvm_binary_stats_test All VM guest modes defined in kvm_util.h require at least 48-bit guest virtual address so to use KVM RISC-V selftests hardware need to support at least Sv48 MMU for guest (i.e. VS-mode). Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
2022-01-06KVM: selftests: Add EXTRA_CFLAGS in top-level MakefileAnup Patel
We add EXTRA_CFLAGS to the common CFLAGS of top-level Makefile which will allow users to pass additional compile-time flags such as "-static". Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com> Reviewed-and-tested-by: Sean Christopherson <seanjc@google.com>
2022-01-05Merge tag 'net-5.16-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski" "Networking fixes, including fixes from bpf, and WiFi. One last pull request, turns out some of the recent fixes did more harm than good. Current release - regressions: - Revert "xsk: Do not sleep in poll() when need_wakeup set", made the problem worse - Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register", broke EPROBE_DEFER handling - Revert "net: usb: r8152: Add MAC pass-through support for more Lenovo Docks", broke setups without a Lenovo dock Current release - new code bugs: - selftests: set amt.sh executable Previous releases - regressions: - batman-adv: mcast: don't send link-local multicast to mcast routers Previous releases - always broken: - ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY - sctp: hold endpoint before calling cb in sctp_transport_lookup_process - mac80211: mesh: embed mesh_paths and mpp_paths into ieee80211_if_mesh to avoid complicated handling of sub-object allocation failures - seg6: fix traceroute in the presence of SRv6 - tipc: fix a kernel-infoleak in __tipc_sendmsg()" * tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits) selftests: set amt.sh executable Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks" sfc: The RX page_ring is optional iavf: Fix limit of total number of queues to active queues of VF i40e: Fix incorrect netdev's real number of RX/TX queues i40e: Fix for displaying message regarding NVM version i40e: fix use-after-free in i40e_sync_filters_subtask() i40e: Fix to not show opcode msg on unsuccessful VF MAC change ieee802154: atusb: fix uninit value in atusb_set_extended_addr mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh mac80211: initialize variable have_higher_than_11mbit sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc netrom: fix copying in user data in nr_setsockopt udp6: Use Segment Routing Header for dest address if present icmp: ICMPV6: Examine invoking packet for Segment Route Headers. seg6: export get_srh() for ICMP handling Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register" ipv6: Do cleanup if attribute validation fails in multipath route ipv6: Continue processing multipath route even if gateway attribute is invalid net/fsl: Remove leftover definition in xgmac_mdio ...
2022-01-05selftests: set amt.sh executableTaehee Yoo
amt.sh test script will not work because it doesn't have execution permission. So, it adds execution permission. Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: c08e8baea78e ("selftests: add amt interface selftest script") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220105144436.13415-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-04Merge branch kvm-arm64/misc-5.17 into kvmarm-master/nextMarc Zyngier
* kvm-arm64/misc-5.17: : . : Misc fixes and improvements: : - Add minimal support for ARMv8.7's PMU extension : - Constify kvm_io_gic_ops : - Drop kvm_is_transparent_hugepage() prototype : - Drop unused workaround_flags field : - Rework kvm_pgtable initialisation : - Documentation fixes : - Replace open-coded SCTLR_EL1.EE useage with its defined macro : - Sysreg list selftest update to handle PAuth : - Include cleanups : . KVM: arm64: vgic: Replace kernel.h with the necessary inclusions KVM: arm64: Fix comment typo in kvm_vcpu_finalize_sve() KVM: arm64: selftests: get-reg-list: Add pauth configuration KVM: arm64: Fix comment on barrier in kvm_psci_vcpu_on() KVM: arm64: Fix comment for kvm_reset_vcpu() KVM: arm64: Use defined value for SCTLR_ELx_EE KVM: arm64: Rework kvm_pgtable initialisation KVM: arm64: Drop unused workaround_flags vcpu field Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-01-04Merge branch kvm-arm64/selftest/irq-injection into kvmarm-master/nextMarc Zyngier
* kvm-arm64/selftest/irq-injection: : . : New tests from Ricardo Koller: : "This series adds a new test, aarch64/vgic-irq, that validates the injection of : different types of IRQs from userspace using various methods and configurations" : . KVM: selftests: aarch64: Add test for restoring active IRQs KVM: selftests: aarch64: Add ISPENDR write tests in vgic_irq KVM: selftests: aarch64: Add tests for IRQFD in vgic_irq KVM: selftests: Add IRQ GSI routing library functions KVM: selftests: aarch64: Add test_inject_fail to vgic_irq KVM: selftests: aarch64: Add tests for LEVEL_INFO in vgic_irq KVM: selftests: aarch64: Level-sensitive interrupts tests in vgic_irq KVM: selftests: aarch64: Add preemption tests in vgic_irq KVM: selftests: aarch64: Cmdline arg to set EOI mode in vgic_irq KVM: selftests: aarch64: Cmdline arg to set number of IRQs in vgic_irq test KVM: selftests: aarch64: Abstract the injection functions in vgic_irq KVM: selftests: aarch64: Add vgic_irq to test userspace IRQ injection KVM: selftests: aarch64: Add vGIC library functions to deal with vIRQ state KVM: selftests: Add kvm_irq_line library function KVM: selftests: aarch64: Add GICv3 register accessor library functions KVM: selftests: aarch64: Add function for accessing GICv3 dist and redist registers KVM: selftests: aarch64: Move gic_v3.h to shared headers Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-01-04KVM: arm64: selftests: get-reg-list: Add pauth configurationMarc Zyngier
The get-reg-list test ignores the Pointer Authentication features, which is a shame now that we have relatively common HW with this feature. Define two new configurations (with and without PMU) that exercise the KVM capabilities. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Link: https://lore.kernel.org/r/20211228121414.1013250-1-maz@kernel.org
2022-01-02Merge tag 'perf-tools-fixes-for-v5.16-2022-01-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix TUI exit screen refresh race condition in 'perf top'. - Fix parsing of Intel PT VM time correlation arguments. - Honour CPU filtering command line request of a script's switch events in 'perf script'. - Fix printing of switch events in Intel PT python script. - Fix duplicate alias events list printing in 'perf list', noticed on heterogeneous arm64 systems. - Fix return value of ids__new(), users expect NULL for failure, not ERR_PTR(-ENOMEM). * tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf top: Fix TUI exit screen refresh race condition perf pmu: Fix alias events list perf scripts python: intel-pt-events.py: Fix printing of switch events perf script: Fix CPU filtering of a script's switch events perf intel-pt: Fix parsing of VM time correlation arguments perf expr: Fix return value of ids__new()
2022-01-02perf top: Fix TUI exit screen refresh race conditionyaowenbin
When the following command is executed several times, a coredump file is generated. $ timeout -k 9 5 perf top -e task-clock ******* ******* ******* 0.01% [kernel] [k] __do_softirq 0.01% libpthread-2.28.so [.] __pthread_mutex_lock 0.01% [kernel] [k] __ll_sc_atomic64_sub_return double free or corruption (!prev) perf top --sort comm,dso timeout: the monitored command dumped core When we terminate "perf top" using sending signal method, SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen management routines by freeing all memory allocated while it was active. However SLsmg_reinit_smg() maybe be called by another thread. SLsmg_reinit_smg() will free the same memory accessed by SLsmg_reset_smg(), thus it results in a double free. SLsmg_reinit_smg() is called already protected by ui__lock, so we fix the problem by adding pthread_mutex_trylock of ui__lock when calling SLsmg_reset_smg(). Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: wuxu.wu@huawei.com Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.com Signed-off-by: Hewenliang <hewenliang4@huawei.com> Signed-off-by: yaowenbin <yaowenbin1@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-02perf pmu: Fix alias events listJohn Garry
Commit 0e0ae8742207c3b4 ("perf list: Display hybrid PMU events with cpu type") changes the event list for uncore PMUs or arm64 heterogeneous CPU systems, such that duplicate aliases are incorrectly listed per PMU (which they should not be), like: # perf list ... unc_cbo_cache_lookup.any_es [Unit: uncore_cbox L3 Lookup any request that access cache and found line in E or S-state] unc_cbo_cache_lookup.any_es [Unit: uncore_cbox L3 Lookup any request that access cache and found line in E or S-state] unc_cbo_cache_lookup.any_i [Unit: uncore_cbox L3 Lookup any request that access cache and found line in I-state] unc_cbo_cache_lookup.any_i [Unit: uncore_cbox L3 Lookup any request that access cache and found line in I-state] ... Notice how the events are listed twice. The named commit changed how we remove duplicate events, in that events for different PMUs are not treated as duplicates. I suppose this is to handle how "Each hybrid pmu event has been assigned with a pmu name". Fix PMU alias listing by restoring behaviour to remove duplicates for non-hybrid PMUs. Fixes: 0e0ae8742207c3b4 ("perf list: Display hybrid PMU events with cpu type") Signed-off-by: John Garry <john.garry@huawei.com> Tested-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-31selftests: net: udpgro_fwd.sh: explicitly checking the available ping featureJianguo Wu
As Paolo pointed out, the result of ping IPv6 address depends on the running distro. So explicitly checking the available ping feature, as e.g. do the bareudp.sh self-tests. Fixes: 8b3170e07539 ("selftests: net: using ping6 for IPv6 in udpgro_fwd.sh") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Link: https://lore.kernel.org/r/825ee22b-4245-dbf7-d2f7-a230770d6e21@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-31Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf 2021-12-31 We've added 2 non-merge commits during the last 14 day(s) which contain a total of 2 files changed, 3 insertions(+), 3 deletions(-). The main changes are: 1) Revert of an earlier attempt to fix xsk's poll() behavior where it turned out that the fix for a rare problem made it much worse in general, from Magnus Karlsson. (Fyi, Magnus mentioned that a proper fix is coming early next year, so the revert is mainly to avoid slipping the behavior into 5.16.) 2) Minor misc spell fix in BPF selftests, from Colin Ian King. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, selftests: Fix spelling mistake "tained" -> "tainted" Revert "xsk: Do not sleep in poll() when need_wakeup set" ==================== Link: https://lore.kernel.org/r/20211231160050.16105-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-31userfaultfd/selftests: fix hugetlb area allocationsMike Kravetz
Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh or any environment where there are 'just enough' hugetlb pages will always fail with: testing events (fork, remap, remove): ERROR: UFFDIO_COPY error: -12 (errno=12, line=616) The ENOMEM error code implies there are not enough hugetlb pages. However, there are free hugetlb pages but they are all reserved. There is a basic problem with the way the test allocates hugetlb pages which has existed since the test was originally written. Due to the way 'cleanup' was done between different phases of the test, this issue was masked until recently. The issue was uncovered by commit 8ba6e8640844 ("userfaultfd/selftests: reinitialize test context in each test"). For the hugetlb test, src and dst areas are allocated as PRIVATE mappings of a hugetlb file. This means that at mmap time, pages are reserved for the src and dst areas. At the start of event testing (and other tests) the src area is populated which results in allocation of huge pages to fill the area and consumption of reserves associated with the area. Then, a child is forked to fault in the dst area. Note that the dst area was allocated in the parent and hence the parent owns the reserves associated with the mapping. The child has normal access to the dst area, but can not use the reserves created/owned by the parent. Thus, if there are no other huge pages available allocation of a page for the dst by the child will fail. Fix by not creating reserves for the dst area. In this way the child can use free (non-reserved) pages. Also, MAP_PRIVATE of a file only makes sense if you are interested in the contents of the file before making a COW copy. The test does not do this. So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous hugetlb mapping. There is no need to create a hugetlb file in the non-shared case. Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-10 15:05:20 +0000