aboutsummaryrefslogtreecommitdiff
path: root/virt
AgeCommit message (Collapse)Author
2016-05-25KVM: Create debugfs dir and stat files for each VMJanosch Frank
This patch adds a kvm debugfs subdirectory for each VM, which is named after its pid and file descriptor. The directories contain the same kind of files that are already in the kvm debugfs directory, but the data exported through them is now VM specific. This makes the debugfs kvm data a convenient alternative to the tracepoints which already have per VM data. The debugfs data is easy to read and low overhead. CC: Dan Carpenter <dan.carpenter@oracle.com> [includes fixes by Dan Carpenter] Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-24Merge tag 'kvm-arm-for-4-7-take2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next KVM/ARM Changes for v4.7 take 2 "The GIC is dead; Long live the GIC" This set of changes include the new vgic, which is a reimplementation of our horribly broken legacy vgic implementation. The two implementations will live side-by-side (with the new being the configured default) for one kernel release and then we'll remove it. Also fixes a non-critical issue with virtual abort injection to guests.
2016-05-20KVM: arm/arm64: vgic-new: Synchronize changes to active stateChristoffer Dall
When modifying the active state of an interrupt via the MMIO interface, we should ensure that the write has the intended effect. If a guest sets an interrupt to active, but that interrupt is already flushed into a list register on a running VCPU, then that VCPU will write the active state back into the struct vgic_irq upon returning from the guest and syncing its state. This is a non-benign race, because the guest can observe that an interrupt is not active, and it can have a reasonable expectations that other VCPUs will not ack any IRQs, and then set the state to active, and expect it to stay that way. Currently we are not honoring this case. Thefore, change both the SACTIVE and CACTIVE mmio handlers to stop the world, change the irq state, potentially queue the irq if we're setting it to active, and then continue. We take this chance to slightly optimize these functions by not stopping the world when touching private interrupts where there is inherently no possible race. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: enable buildAndre Przywara
Now that the new VGIC implementation has reached feature parity with the old one, add the new files to the build system and add a Kconfig option to switch between the two versions. We set the default to the new version to get maximum test coverage, in case people experience problems they can switch back to the old behaviour if needed. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: implement mapped IRQ handlingAndre Przywara
We now store the mapped hardware IRQ number in our struct, so we don't need the irq_phys_map for the new VGIC. Implement the hardware IRQ mapping on top of the reworked arch timer interface. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Wire up irqfd injectionAndre Przywara
Connect to the new VGIC to the irqfd framework, so that we can inject IRQs. GSI routing and MSI routing is not yet implemented. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add vgic_v2/v3_enableEric Auger
Enable the VGIC operation by properly initialising the registers in the hypervisor GIC interface. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_init: implement map_resourcesEric Auger
map_resources is the last initialization step. It is executed on first VCPU run. At that stage the code checks that userspace has provided the base addresses for the relevant VGIC regions, which depend on the type of VGIC that is exposed to the guest. Also we check if the two regions overlap. If the checks succeeded, we register the respective register frames with the kvm_io_bus framework. If we emulate a GICv2, the function also forces vgic_init execution if it has not been executed yet. Also we map the virtual GIC CPU interface onto the guest's CPU interface. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_init: implement vgic_initEric Auger
This patch allocates and initializes the data structures used to model the vgic distributor and virtual cpu interfaces. At that stage the number of IRQs and number of virtual CPUs is frozen. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_init: implement vgic_createEric Auger
This patch implements the vgic_creation function which is called on CREATE_IRQCHIP VM IOCTL (v2 only) or KVM_CREATE_DEVICE Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_initEric Auger
Implements kvm_vgic_hyp_init and vgic_probe function. This uses the new firmware independent VGIC probing to support both ACPI and DT based systems (code from Marc Zyngier). The vgic_global struct is enriched with new fields populated by those functions. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add userland GIC CPU interface accessAndre Przywara
Using the VMCR accessors we provide access to GIC CPU interface state to userland by wiring it up to the existing userland interface. [Marc: move and make VMCR accessors static, streamline MMIO handlers] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICH_VMCR accessorsAndre Przywara
Since the GIC CPU interface is always virtualized by the hardware, we don't have CPU interface state information readily available in our emulation if userland wants to save or restore it. Fortunately the GIC hypervisor interface provides the VMCR register to access the required virtual CPU interface bits. Provide wrappers for GICv2 and GICv3 hosts to have access to this register. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add userland access to VGIC dist registersAndre Przywara
Userland may want to save and restore the state of the in-kernel VGIC, so we provide the code which takes a userland request and translate that into calls to our MMIO framework. From Christoffer: When accessing the VGIC state from userspace we really don't want a VCPU to be messing with the state at the same time, and the API specifies that we should return -EBUSY if any VCPUs are running. Check and prevent VCPUs from running by grabbing their mutexes, one by one, and error out if we fail. (Note: This could potentially be simplified to just do a simple check and see if any VCPUs are running, and return -EBUSY then, without enforcing the locking throughout the duration of the uaccess, if we think that taking/releasing all these mutexes for every single GIC register access is too heavyweight.) Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Export register access interfaceChristoffer Dall
Userland can access the emulated GIC to save and restore its state for initialization or migration purposes. The kvm_io_bus API requires an absolute gpa, which does not fit the KVM_DEV_ARM_VGIC_GRP_DIST_REGS user API, that only provides relative offsets. So we provide a wrapper to plug into our MMIO framework and find the respective register handler. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20KVM: arm/arm64: vgic-new: vgic_kvm_device: access to VGIC registersEric Auger
This patch implements the switches for KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS API which allows the userspace to access VGIC registers. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_ADDREric Auger
This patch implements the KVM_DEV_ARM_VGIC_GRP_ADDR group which enables to set the base address of GIC regions as seen by the guest. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_kvm_device: implement kvm_vgic_addrEric Auger
kvm_vgic_addr is used by the userspace to set the base address of the following register regions, as seen by the guest: - distributor(v2 and v3), - re-distributors (v3), - CPU interface (v2). Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_CTRLEric Auger
This patch implements the KVM_DEV_ARM_VGIC_GRP_CTRL group API featuring KVM_DEV_ARM_VGIC_CTRL_INIT attribute. The vgic_init function is not yet implemented though. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_NR_IRQSEric Auger
This patch implements the KVM_DEV_ARM_VGIC_GRP_NR_IRQS group. This modality is supported by both VGIC V2 and V3 KVM device as will be other groups, hence the introduction of common helpers. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM device ops registrationEric Auger
This patch introduces the skeleton for the KVM device operations associated to KVM_DEV_TYPE_ARM_VGIC_V2 and KVM_DEV_TYPE_ARM_VGIC_V3. At that stage kvm_vgic_create is stubbed. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 SGI system register trap handlerAndre Przywara
In contrast to GICv2 SGIs in a GICv3 implementation are not triggered by a MMIO write, but with a system register write. KVM knows about that register already, we just need to implement the handler and wire it up to the core KVM/ARM code. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 IROUTER register handlersAndre Przywara
Since GICv3 supports much more than the 8 CPUs the GICv2 ITARGETSR register can handle, the new IROUTER register covers the whole range of possible target (V)CPUs by using the same MPIDR that the cores report themselves. In addition to translating this MPIDR into a vcpu pointer we store the originally written value as well. The architecture allows to write any values into the register, which must be read back as written. Since we don't support affinity level 3, we don't need to take care about the upper word of this 64-bit register, which simplifies the handling a bit. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 IDREGS register handlerAndre Przywara
We implement the only one ID register that is required by the architecture, also this is the one that Linux actually checks. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 redistributor IIDR and TYPER handlerAndre Przywara
The redistributor TYPER tells the OS about the associated MPIDR, also the LAST bit is crucial to determine the number of redistributors. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 CTLR, IIDR, TYPER handlersAndre Przywara
As in the GICv2 emulation we handle those three registers in one function. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 MMIO handling frameworkAndre Przywara
Create a new file called vgic-mmio-v3.c and describe the GICv3 distributor and redistributor registers there. This adds a special macro to deal with the split of SGI/PPI in the redistributor and SPIs in the distributor, which allows us to reuse the existing GICv2 handlers for those registers which are compatible. Also we provide a function to deal with the registration of the two separate redistributor frames per VCPU. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add SGIPENDR register handlersAndre Przywara
As this register is v2 specific, its implementation lives entirely in vgic-mmio-v2.c. This register allows setting the source mask of an IPI. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add SGIR register handlerAndre Przywara
Triggering an IPI via this register is v2 specific, so the implementation lives entirely in vgic-mmio-v2.c. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add TARGET registers handlersAndre Przywara
The target register handlers are v2 emulation specific, so their implementation lives entirely in vgic-mmio-v2.c. We copy the old VGIC behaviour of assigning an IRQ to the first VCPU set in the target mask instead of making it possibly pending on multiple VCPUs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add CONFIG registers handlersAndre Przywara
The config register handlers are shared between the v2 and v3 emulation, so their implementation goes into vgic-mmio.c, to be easily referenced from the v3 emulation as well later. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20KVM: arm/arm64: vgic-new: Add PRIORITY registers handlersAndre Przywara
The priority register handlers are shared between the v2 and v3 emulation, so their implementation goes into vgic-mmio.c, to be easily referenced from the v3 emulation as well later. There is a corner case when we change the priority of a pending interrupt which we don't handle at the moment. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add ACTIVE registers handlersAndre Przywara
The active register handlers are shared between the v2 and v3 emulation, so their implementation goes into vgic-mmio.c, to be easily referenced from the v3 emulation as well later. Since activation/deactivation of an interrupt may happen entirely in the guest without it ever exiting, we need some extra logic to properly track the active state. For clearing the active state, we basically have to halt the guest to make sure this is properly propagated into the respective VCPUs. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20KVM: arm/arm64: vgic-new: Add PENDING registers handlersAndre Przywara
The pending register handlers are shared between the v2 and v3 emulation, so their implementation goes into vgic-mmio.c, to be easily referenced from the v3 emulation as well later. For level triggered interrupts the real line level is unaffected by this write, so we keep this state separate and combine it with the device's level to get the actual pending state. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add ENABLE registers handlersAndre Przywara
As the enable register handlers are shared between the v2 and v3 emulation, their implementation goes into vgic-mmio.c, to be easily referenced from the v3 emulation as well later. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add CTLR, TYPER and IIDR handlersMarc Zyngier
Those three registers are v2 emulation specific, so their implementation lives entirely in vgic-mmio-v2.c. Also they are handled in one function, as their implementation is pretty simple. When the guest enables the distributor, we kick all VCPUs to get potentially pending interrupts serviced. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv2 MMIO handling frameworkAndre Przywara
Create vgic-mmio-v2.c to describe GICv2 emulation specific handlers using the initializer macros provided by the VGIC MMIO framework. Provide a function to register the GICv2 distributor registers to the kvm_io_bus framework. The actual handler functions are still stubs in this patch. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add MMIO handling frameworkMarc Zyngier
Add an MMIO handling framework to the VGIC emulation: Each register is described by its offset, size (or number of bits per IRQ, if applicable) and the read/write handler functions. We provide initialization macros to describe each GIC register later easily. Separate dispatch functions for read and write accesses are connected to the kvm_io_bus framework and binary-search for the responsible register handler based on the offset address within the region. We convert the incoming data (referenced by a pointer) to the host's endianess and use pass-by-value to hand the data over to the actual handler functions. The register handler prototype and the endianess conversion are courtesy of Christoffer Dall. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Implement kvm_vgic_vcpu_pending_irqEric Auger
Tell KVM whether a particular VCPU has an IRQ that needs handling in the guest. This is used to decide whether a VCPU is runnable. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 world switch backendMarc Zyngier
As the GICv3 virtual interface registers differ from their GICv2 siblings, we need different handlers for processing maintenance interrupts and reading/writing to the LRs. Implement the respective handler functions and connect them to existing code to be called if the host is using a GICv3. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv2 world switch backendMarc Zyngier
Processing maintenance interrupts and accessing the list registers are dependent on the host's GIC version. Introduce vgic-v2.c to contain GICv2 specific functions. Implement the GICv2 specific code for syncing the emulation state into the VGIC registers. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add IRQ sync/flush frameworkMarc Zyngier
Implement the framework for syncing IRQs between our emulation and the list registers, which represent the guest's view of IRQs. This is done in kvm_vgic_flush_hwstate and kvm_vgic_sync_hwstate, which gets called on guest entry and exit. The code talking to the actual GICv2/v3 hardware is added in the following patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add IRQ sortingChristoffer Dall
Adds the sorting function to cover the case where you have more IRQs to consider than you have LRs. We now consider priorities. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-20KVM: arm/arm64: vgic-new: Implement virtual IRQ injectionChristoffer Dall
Provide a vgic_queue_irq_unlock() function which decides whether a given IRQ needs to be queued to a VCPU's ap_list. This should be called whenever an IRQ becomes pending or enabled, either as a result of userspace injection, from in-kernel emulated devices like the architected timer or from MMIO accesses to the distributor emulation. Also provides the necessary functions to allow userland to inject an IRQ to a guest. Since this is the first code that starts using our locking mechanism, we add some (hopefully) clear documentation of our locking strategy and requirements along with this patch. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20KVM: arm/arm64: vgic-new: Add acccessor to new struct vgic_irq instanceChristoffer Dall
The new VGIC implementation centers around a struct vgic_irq instance per virtual IRQ. Provide a function to retrieve the right instance for a given IRQ number and (in case of private interrupts) the right VCPU. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-20KVM: arm/arm64: move GICv2 emulation defines into arm-gic-v3.hAndre Przywara
As (some) GICv3 hosts can emulate a GICv2, some GICv2 specific masks for the list register definition also apply to GICv3 LRs. At the moment we have those definitions in the KVM VGICv3 implementation, so let's move them into the GICv3 header file to have them automatically defined. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-20KVM: arm/arm64: pmu: abstract access to number of SPIsAndre Przywara
Currently the PMU uses a member of the struct vgic_dist directly, which not only breaks abstraction, but will fail with the new VGIC. Abstract this access in the VGIC header file and refactor the validity check in the PMU code. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20KVM: arm/arm64: Fix MMIO emulation data handlingChristoffer Dall
When the kernel was handling a guest MMIO read access internally, we need to copy the emulation result into the run->mmio structure in order for the kvm_handle_mmio_return() function to pick it up and inject the result back into the guest. Currently the only user of kvm_io_bus for ARM is the VGIC, which did this copying itself, so this was not causing issues so far. But with the upcoming new vgic implementation we need this done properly. Update the kvm_handle_mmio_return description and cleanup the code to only perform a single copying when needed. Code and commit message inspired by Andre Przywara. Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20KVM: arm/arm64: Get rid of vgic_cpu->nr_lrChristoffer Dall
The number of list registers is a property of the underlying system, not of emulated VGIC CPU interface. As we are about to move this variable to global state in the new vgic for clarity, move it from the legacy implementation as well to make the merge of the new code easier. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20KVM: arm/arm64: Move timer IRQ map to latest possible timeChristoffer Dall
We are about to modify the VGIC to allocate all data structures dynamically and store mapped IRQ information on a per-IRQ struct, which is indeed allocated dynamically at init time. Therefore, we cannot record the mapped IRQ info from the timer at timer reset time like it's done now, because VCPU reset happens before timer init. A possible later time to do this is on the first run of a per VCPU, it just requires us to move the enable state to be a per-VCPU state and do the lookup of the physical IRQ number when we are about to run the VCPU. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>