aboutsummaryrefslogtreecommitdiff
path: root/virt
AgeCommit message (Collapse)Author
2019-12-22Merge tag 'kvm-ppc-fixes-5.5-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master PPC KVM fix for 5.5 - Fix a bug where we try to do an ultracall on a system without an ultravisor.
2019-12-18Merge tag 'kvmarm-fixes-5.5-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm fixes for .5.5, take #1 - Fix uninitialised sysreg accessor - Fix handling of demand-paged device mappings - Stop spamming the console on IMPDEF sysregs - Relax mappings of writable memslots - Assorted cleanups
2019-12-12KVM: arm/arm64: Properly handle faulting of device mappingsMarc Zyngier
A device mapping is normally always mapped at Stage-2, since there is very little gain in having it faulted in. Nonetheless, it is possible to end-up in a situation where the device mapping has been removed from Stage-2 (userspace munmaped the VFIO region, and the MMU notifier did its job), but present in a userspace mapping (userpace has mapped it back at the same address). In such a situation, the device mapping will be demand-paged as the guest performs memory accesses. This requires to be careful when dealing with mapping size, cache management, and to handle potential execution of a device mapping. Reported-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191211165651.7889-2-maz@kernel.org
2019-12-06KVM: arm/arm64: Remove excessive permission check in ↵Jia He
kvm_arch_prepare_memory_region In kvm_arch_prepare_memory_region, arm kvm regards the memory region as writable if the flag has no KVM_MEM_READONLY, and the vm is readonly if !VM_WRITE. But there is common usage for setting kvm memory region as follows: e.g. qemu side (see the PROT_NONE flag) 1. mmap(NULL, size, PROT_NONE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); memory_region_init_ram_ptr() 2. re mmap the above area with read/write authority. Such example is used in virtio-fs qemu codes which hasn't been upstreamed [1]. But seems we can't forbid this example. Without this patch, it will cause an EPERM during kvm_set_memory_region() and cause qemu boot crash. As told by Ard, "the underlying assumption is incorrect, i.e., that the value of vm_flags at this point in time defines how the VMA is used during its lifetime. There may be other cases where a VMA is created with VM_READ vm_flags that are changed to VM_READ|VM_WRITE later, and we are currently rejecting this use case as well." [1] https://gitlab.com/virtio-fs/qemu/blob/5a356e/hw/virtio/vhost-user-fs.c#L488 Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Link: https://lore.kernel.org/r/20191206020802.196108-1-justin.he@arm.com
2019-12-06KVM: arm/arm64: vgic: Use wrapper function to lock/unlock all vcpus in ↵Miaohe Lin
kvm_vgic_create() Use wrapper function lock_all_vcpus()/unlock_all_vcpus() in kvm_vgic_create() to remove duplicated code dealing with locking and unlocking all vcpus in a vm. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/1575081918-11401-1-git-send-email-linmiaohe@huawei.com
2019-12-06KVM: arm/arm64: vgic: Fix potential double free dist->spis in ↵Miaohe Lin
__kvm_vgic_destroy() In kvm_vgic_dist_init() called from kvm_vgic_map_resources(), if dist->vgic_model is invalid, dist->spis will be freed without set dist->spis = NULL. And in vgicv2 resources clean up path, __kvm_vgic_destroy() will be called to free allocated resources. And dist->spis will be freed again in clean up chain because we forget to set dist->spis = NULL in kvm_vgic_dist_init() failed path. So double free would happen. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/1574923128-19956-1-git-send-email-linmiaohe@huawei.com
2019-12-06KVM: arm/arm64: Get rid of unused arg in cpu_init_hyp_mode()Miaohe Lin
As arg dummy is not really needed, there's no need to pass NULL when calling cpu_init_hyp_mode(). So clean it up. Fixes: 67f691976662 ("arm64: kvm: allows kvm cpu hotplug") Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1574320559-5662-1-git-send-email-linmiaohe@huawei.com
2019-11-23KVM: Fix jump label out_free_* in kvm_init()Miaohe Lin
The jump label out_free_1 and out_free_2 deal with the same stuff, so git rid of one and rename the label out_free_0a to retain the label name order. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-21Merge branch 'kvm-tsx-ctrl' into HEADPaolo Bonzini
Conflicts: arch/x86/kvm/vmx/vmx.c
2019-11-21Merge tag 'kvmarm-5.5' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm updates for Linux 5.5: - Allow non-ISV data aborts to be reported to userspace - Allow injection of data aborts from userspace - Expose stolen time to guests - GICv4 performance improvements - vgic ITS emulation fixes - Simplify FWB handling - Enable halt pool counters - Make the emulated timer PREEMPT_RT compliant Conflicts: include/uapi/linux/kvm.h
2019-11-15KVM: remember position in kvm->vcpus arrayRadim Krčmář
Fetching an index for any vcpu in kvm->vcpus array by traversing the entire array everytime is costly. This patch remembers the position of each vcpu in kvm->vcpus array by storing it in vcpus_idx under kvm_vcpu structure. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: MMIO: get rid of odd out_err label in kvm_coalesced_mmio_initMiaohe Lin
The out_err label and var ret is unnecessary, clean them up. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: Add a comment describing the /dev/kvm no_compat handlingMarc Zyngier
Add a comment explaining the rational behind having both no_compat open and ioctl callbacks to fend off compat tasks. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-13KVM: Forbid /dev/kvm being opened by a compat task when CONFIG_KVM_COMPAT=nMarc Zyngier
On a system without KVM_COMPAT, we prevent IOCTLs from being issued by a compat task. Although this prevents most silly things from happening, it can still confuse a 32bit userspace that is able to open the kvm device (the qemu test suite seems to be pretty mad with this behaviour). Take a more radical approach and return a -ENODEV to the compat task. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Fix unwinding of KVM_CREATE_VM failure, VT-d posted interrupts, DAX/ZONE_DEVICE, and module unload/reload" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved KVM: VMX: Introduce pi_is_pir_empty() helper KVM: VMX: Do not change PID.NDST when loading a blocked vCPU KVM: VMX: Consider PID.PIR to determine if vCPU has pending interrupts KVM: VMX: Fix comment to specify PID.ON instead of PIR.ON KVM: X86: Fix initialization of MSR lists KVM: fix placement of refcount initialization KVM: Fix NULL-ptr deref after kvm_create_vm fails
2019-11-12KVM: MMU: Do not treat ZONE_DEVICE pages as being reservedSean Christopherson
Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and instead manually handle ZONE_DEVICE on a case-by-case basis. For things like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal pages, e.g. put pages grabbed via gup(). But for flows such as setting A/D bits or shifting refcounts for transparent huge pages, KVM needs to to avoid processing ZONE_DEVICE pages as the flows in question lack the underlying machinery for proper handling of ZONE_DEVICE pages. This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup() when running a KVM guest backed with /dev/dax memory, as KVM straight up doesn't put any references to ZONE_DEVICE pages acquired by gup(). Note, Dan Williams proposed an alternative solution of doing put_page() on ZONE_DEVICE pages immediately after gup() in order to simplify the auditing needed to ensure is_zone_device_page() is called if and only if the backing device is pinned (via gup()). But that approach would break kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til unmap() when accessing guest memory, unlike KVM's secondary MMU, which coordinates with mmu_notifier invalidations to avoid creating stale page references, i.e. doesn't rely on pages being pinned. [*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.pl Reported-by: Adam Borowski <kilobyte@angband.pl> Analyzed-by: David Hildenbrand <david@redhat.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-11KVM: fix placement of refcount initializationPaolo Bonzini
Reported by syzkaller: ============================= WARNING: suspicious RCU usage ----------------------------- ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by repro_11/12688. stack backtrace: Call Trace: dump_stack+0x7d/0xc5 lockdep_rcu_suspicious+0x123/0x170 kvm_dev_ioctl+0x9a9/0x1260 [kvm] do_vfs_ioctl+0x1a1/0xfb0 ksys_ioctl+0x6d/0x80 __x64_sys_ioctl+0x73/0xb0 do_syscall_64+0x108/0xaa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Commit a97b0e773e4 (kvm: call kvm_arch_destroy_vm if vm creation fails) sets users_count to 1 before kvm_arch_init_vm(), however, if kvm_arch_init_vm() fails, we need to decrease this count. By moving it earlier, we can push the decrease to out_err_no_arch_destroy_vm without introducing yet another error label. syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=15209b84e00000 Reported-by: syzbot+75475908cd0910f141ee@syzkaller.appspotmail.com Fixes: a97b0e773e49 ("kvm: call kvm_arch_destroy_vm if vm creation fails") Cc: Jim Mattson <jmattson@google.com> Analyzed-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-11KVM: Fix NULL-ptr deref after kvm_create_vm failsPaolo Bonzini
Reported by syzkaller: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 14727 Comm: syz-executor.3 Not tainted 5.4.0-rc4+ #0 RIP: 0010:kvm_coalesced_mmio_init+0x5d/0x110 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:121 Call Trace: kvm_dev_ioctl_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:3446 [inline] kvm_dev_ioctl+0x781/0x1490 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3494 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x196/0x1150 fs/ioctl.c:696 ksys_ioctl+0x62/0x90 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x6e/0xb0 fs/ioctl.c:718 do_syscall_64+0xca/0x5d0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Commit 9121923c457d ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm") moves memslots and buses allocations around, however, if kvm->srcu/irq_srcu fails initialization, NULL will be returned instead of error code, NULL will not be intercepted in kvm_dev_ioctl_create_vm() and be dereferenced by kvm_coalesced_mmio_init(), this patch fixes it. Moving the initialization is required anyway to avoid an incorrect synchronize_srcu that was also reported by syzkaller: wait_for_completion+0x29c/0x440 kernel/sched/completion.c:136 __synchronize_srcu+0x197/0x250 kernel/rcu/srcutree.c:921 synchronize_srcu_expedited kernel/rcu/srcutree.c:946 [inline] synchronize_srcu+0x239/0x3e8 kernel/rcu/srcutree.c:997 kvm_page_track_unregister_notifier+0xe7/0x130 arch/x86/kvm/page_track.c:212 kvm_mmu_uninit_vm+0x1e/0x30 arch/x86/kvm/mmu.c:5828 kvm_arch_destroy_vm+0x4a2/0x5f0 arch/x86/kvm/x86.c:9579 kvm_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:702 [inline] so do it. Reported-by: syzbot+89a8060879fa0bd2db4f@syzkaller.appspotmail.com Reported-by: syzbot+e27e7027eb2b80e44225@syzkaller.appspotmail.com Fixes: 9121923c457d ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm") Cc: Jim Mattson <jmattson@google.com> Cc: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-08Merge remote-tracking branch 'kvmarm/misc-5.5' into kvmarm/nextMarc Zyngier
2019-11-08KVM: arm64: Opportunistically turn off WFI trapping when using direct LPI ↵Marc Zyngier
injection Just like we do for WFE trapping, it can be useful to turn off WFI trapping when the physical CPU is not oversubscribed (that is, the vcpu is the only runnable process on this CPU) *and* that we're using direct injection of interrupts. The conditions are reevaluated on each vcpu_load(), ensuring that we don't switch to this mode on a busy system. On a GICv4 system, this has the effect of reducing the generation of doorbell interrupts to zero when the right conditions are met, which is a huge improvement over the current situation (where the doorbells are screaming if the CPU ever hits a blocking WFI). Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Link: https://lore.kernel.org/r/20191107160412.30301-3-maz@kernel.org
2019-11-08KVM: vgic-v4: Track the number of VLPIs per vcpuMarc Zyngier
In order to find out whether a vcpu is likely to be the target of VLPIs (and to further optimize the way we deal with those), let's track the number of VLPIs a vcpu can receive. This gets implemented with an atomic variable that gets incremented or decremented on map, unmap and move of a VLPI. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Link: https://lore.kernel.org/r/20191107160412.30301-2-maz@kernel.org
2019-11-07KVM: arm/arm64: Let the timer expire in hardirq context on RTThomas Gleixner
The timers are canceled from an preempt-notifier which is invoked with disabled preemption which is not allowed on PREEMPT_RT. The timer callback is short so in could be invoked in hard-IRQ context on -RT. Let the timer expire on hard-IRQ context even on -RT. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Julien Grall <julien.grall@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191107095424.16647-1-bigeasy@linutronix.de
2019-11-04kvm: x86: mmu: Recovery of shattered NX large pagesJunaid Shahid
The page table pages corresponding to broken down large pages are zapped in FIFO order, so that the large page can potentially be recovered, if it is not longer being used for execution. This removes the performance penalty for walking deeper EPT page tables. By default, one large page will last about one hour once the guest reaches a steady state. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-11-04kvm: Add helper function for creating VM worker threadsJunaid Shahid
Add a function to create a kernel thread associated with a given VM. In particular, it ensures that the worker thread inherits the priority and cgroups of the calling thread. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-10-31kvm: call kvm_arch_destroy_vm if vm creation failsJim Mattson
In kvm_create_vm(), if we've successfully called kvm_arch_init_vm(), but then fail later in the function, we need to call kvm_arch_destroy_vm() so that it can do any necessary cleanup (like freeing memory). Fixes: 44a95dae1d229a ("KVM: x86: Detect and Initialize AVIC support") Signed-off-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Junaid Shahid <junaids@google.com> [Remove dependency on "kvm: Don't clear reference count on kvm_create_vm() error path" which was not committed. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-29KVM: arm/arm64: vgic: Don't rely on the wrong pending tableZenghui Yu
It's possible that two LPIs locate in the same "byte_offset" but target two different vcpus, where their pending status are indicated by two different pending tables. In such a scenario, using last_byte_offset optimization will lead KVM relying on the wrong pending table entry. Let us use last_ptr instead, which can be treated as a byte index into a pending table and also, can be vcpu specific. Fixes: 280771252c1b ("KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES") Cc: stable@vger.kernel.org Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20191029071919.177-4-yuzenghui@huawei.com
2019-10-29KVM: arm/arm64: vgic: Fix some comments typoZenghui Yu
Fix various comments, including wrong function names, grammar mistakes and specification references. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191029071919.177-3-yuzenghui@huawei.com
2019-10-28KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/putMarc Zyngier
When the VHE code was reworked, a lot of the vgic stuff was moved around, but the GICv4 residency code did stay untouched, meaning that we come in and out of residency on each flush/sync, which is obviously suboptimal. To address this, let's move things around a bit: - Residency entry (flush) moves to vcpu_load - Residency exit (sync) moves to vcpu_put - On blocking (entry to WFI), we "put" - On unblocking (exit from WFI), we "load" Because these can nest (load/block/put/load/unblock/put, for example), we now have per-VPE tracking of the residency state. Additionally, vgic_v4_put gains a "need doorbell" parameter, which only gets set to true when blocking because of a WFI. This allows a finer control of the doorbell, which now also gets disabled as soon as it gets signaled. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191027144234.8395-2-maz@kernel.org
2019-10-25kvm: Allocate memslots and buses before calling kvm_arch_init_vmJim Mattson
This reorganization will allow us to call kvm_arch_destroy_vm in the event that kvm_create_vm fails after calling kvm_arch_init_vm. Suggested-by: Junaid Shahid <junaids@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-24Merge remote-tracking branch 'kvmarm/kvm-arm64/stolen-time' into ↵Marc Zyngier
kvmarm-master/next
2019-10-22KVM: Add separate helper for putting borrowed reference to kvmSean Christopherson
Add a new helper, kvm_put_kvm_no_destroy(), to handle putting a borrowed reference[*] to the VM when installing a new file descriptor fails. KVM expects the refcount to remain valid in this case, as the in-progress ioctl() has an explicit reference to the VM. The primary motiviation for the helper is to document that the 'kvm' pointer is still valid after putting the borrowed reference, e.g. to document that doing mutex(&kvm->lock) immediately after putting a ref to kvm isn't broken. [*] When exposing a new object to userspace via a file descriptor, e.g. a new vcpu, KVM grabs a reference to itself (the VM) prior to making the object visible to userspace to avoid prematurely freeing the VM in the scenario where userspace immediately closes file descriptor. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22Merge tag 'kvmarm-fixes-5.4-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.4, take #2 Special PMU edition: - Fix cycle counter truncation - Fix cycle counter overflow limit on pure 64bit system - Allow chained events to be actually functional - Correct sample period after overflow
2019-10-22KVM: Don't shrink/grow vCPU halt_poll_ns if host side polling is disabledWanpeng Li
Don't waste cycles to shrink/grow vCPU halt_poll_ns if host side polling is disabled. Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-21KVM: arm64: Provide VCPU attributes for stolen timeSteven Price
Allow user space to inform the KVM host where in the physical memory map the paravirtualized time structures should be located. User space can set an attribute on the VCPU providing the IPA base address of the stolen time structure for that VCPU. This must be repeated for every VCPU in the VM. The address is given in terms of the physical address visible to the guest and must be 64 byte aligned. The guest will discover the address via a hypercall. Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21KVM: Allow kvm_device_ops to be constSteven Price
Currently a kvm_device_ops structure cannot be const without triggering compiler warnings. However the structure doesn't need to be written to and, by marking it const, it can be read-only in memory. Add some more const keywords to allow this. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21KVM: arm64: Support stolen time reporting via shared structureSteven Price
Implement the service call for configuring a shared structure between a VCPU and the hypervisor in which the hypervisor can write the time stolen from the VCPU's execution time by other tasks on the host. User space allocates memory which is placed at an IPA also chosen by user space. The hypervisor then updates the shared structure using kvm_put_guest() to ensure single copy atomicity of the 64-bit value reporting the stolen time in nanoseconds. Whenever stolen time is enabled by the guest, the stolen time counter is reset. The stolen time itself is retrieved from the sched_info structure maintained by the Linux scheduler code. We enable SCHEDSTATS when selecting KVM Kconfig to ensure this value is meaningful. Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21KVM: arm64: Implement PV_TIME_FEATURES callSteven Price
This provides a mechanism for querying which paravirtualized time features are available in this hypervisor. Also add the header file which defines the ABI for the paravirtualized time features we're about to add. Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21KVM: arm/arm64: Factor out hypercall handling from PSCI codeChristoffer Dall
We currently intertwine the KVM PSCI implementation with the general dispatch of hypercall handling, which makes perfect sense because PSCI is the only category of hypercalls we support. However, as we are about to support additional hypercalls, factor out this functionality into a separate hypercall handler file. Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> [steven.price@arm.com: rebased] Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21KVM: arm/arm64: Allow user injection of external data abortsChristoffer Dall
In some scenarios, such as buggy guest or incorrect configuration of the VMM and firmware description data, userspace will detect a memory access to a portion of the IPA, which is not mapped to any MMIO region. For this purpose, the appropriate action is to inject an external abort to the guest. The kernel already has functionality to inject an external abort, but we need to wire up a signal from user space that lets user space tell the kernel to do this. It turns out, we already have the set event functionality which we can perfectly reuse for this. Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21KVM: arm/arm64: Allow reporting non-ISV data aborts to userspaceChristoffer Dall
For a long time, if a guest accessed memory outside of a memslot using any of the load/store instructions in the architecture which doesn't supply decoding information in the ESR_EL2 (the ISV bit is not set), the kernel would print the following message and terminate the VM as a result of returning -ENOSYS to userspace: load/store instruction decoding not implemented The reason behind this message is that KVM assumes that all accesses outside a memslot is an MMIO access which should be handled by userspace, and we originally expected to eventually implement some sort of decoding of load/store instructions where the ISV bit was not set. However, it turns out that many of the instructions which don't provide decoding information on abort are not safe to use for MMIO accesses, and the remaining few that would potentially make sense to use on MMIO accesses, such as those with register writeback, are not used in practice. It also turns out that fetching an instruction from guest memory can be a pretty horrible affair, involving stopping all CPUs on SMP systems, handling multiple corner cases of address translation in software, and more. It doesn't appear likely that we'll ever implement this in the kernel. What is much more common is that a user has misconfigured his/her guest and is actually not accessing an MMIO region, but just hitting some random hole in the IPA space. In this scenario, the error message above is almost misleading and has led to a great deal of confusion over the years. It is, nevertheless, ABI to userspace, and we therefore need to introduce a new capability that userspace explicitly enables to change behavior. This patch introduces KVM_CAP_ARM_NISV_TO_USER (NISV meaning Non-ISV) which does exactly that, and introduces a new exit reason to report the event to userspace. User space can then emulate an exception to the guest, restart the guest, suspend the guest, or take any other appropriate action as per the policy of the running system. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-20KVM: arm64: pmu: Reset sample period on overflow handlingMarc Zyngier
The PMU emulation code uses the perf event sample period to trigger the overflow detection. This works fine for the *first* overflow handling, but results in a huge number of interrupts on the host, unrelated to the number of interrupts handled in the guest (a x20 factor is pretty common for the cycle counter). On a slow system (such as a SW model), this can result in the guest only making forward progress at a glacial pace. It turns out that the clue is in the name. The sample period is exactly that: a period. And once the an overflow has occured, the following period should be the full width of the associated counter, instead of whatever the guest had initially programed. Reset the sample period to the architected value in the overflow handler, which now results in a number of host interrupts that is much closer to the number of interrupts in the guest. Fixes: b02386eb7dac ("arm64: KVM: Add PMU overflow interrupt routing") Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-20KVM: arm64: pmu: Set the CHAINED attribute before creating the in-kernel eventMarc Zyngier
The current convention for KVM to request a chained event from the host PMU is to set bit[0] in attr.config1 (PERF_ATTR_CFG1_KVM_PMU_CHAINED). But as it turns out, this bit gets set *after* we create the kernel event that backs our virtual counter, meaning that we never get a 64bit counter. Moving the setting to an earlier point solves the problem. Fixes: 80f393a23be6 ("KVM: arm/arm64: Support chained PMU counters") Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-20KVM: arm64: pmu: Fix cycle counter truncationMarc Zyngier
When a counter is disabled, its value is sampled before the event is being disabled, and the value written back in the shadow register. In that process, the value gets truncated to 32bit, which is adequate for any counter but the cycle counter (defined as a 64bit counter). This obviously results in a corrupted counter, and things like "perf record -e cycles" not working at all when run in a guest... A similar, but less critical bug exists in kvm_pmu_get_counter_value. Make the truncation conditional on the counter not being the cycle counter, which results in a minor code reorganisation. Fixes: 80f393a23be6 ("KVM: arm/arm64: Support chained PMU counters") Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reported-by: Julien Thierry <julien.thierry.kdev@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-03Merge tag 'kvmarm-fixes-5.4-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.4, take #1 - Remove the now obsolete hyp_alternate_select construct - Fix the TRACE_INCLUDE_PATH macro in the vgic code
2019-09-30kvm: x86, powerpc: do not allow clearing largepages debugfs entryPaolo Bonzini
The largepages debugfs entry is incremented/decremented as shadow pages are created or destroyed. Clearing it will result in an underflow, which is harmless to KVM but ugly (and could be misinterpreted by tools that use debugfs information), so make this particular statistic read-only. Cc: kvm-ppc@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "s390: - ioctl hardening - selftests ARM: - ITS translation cache - support for 512 vCPUs - various cleanups and bugfixes PPC: - various minor fixes and preparation x86: - bugfixes all over the place (posted interrupts, SVM, emulation corner cases, blocked INIT) - some IPI optimizations" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits) KVM: X86: Use IPI shorthands in kvm guest when support KVM: x86: Fix INIT signal handling in various CPU states KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode KVM: VMX: Stop the preemption timer during vCPU reset KVM: LAPIC: Micro optimize IPI latency kvm: Nested KVM MMUs need PAE root too KVM: x86: set ctxt->have_exception in x86_decode_insn() KVM: x86: always stop emulation on page fault KVM: nVMX: trace nested VM-Enter failures detected by H/W KVM: nVMX: add tracepoint for failed nested VM-Enter x86: KVM: svm: Fix a check in nested_svm_vmrun() KVM: x86: Return to userspace with internal error on unexpected exit reason KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers doc: kvm: Fix return description of KVM_SET_MSRS KVM: X86: Tune PLE Window tracepoint KVM: VMX: Change ple_window type to unsigned int KVM: X86: Remove tailing newline for tracepoints KVM: X86: Trace vcpu_id for vmexit KVM: x86: Manually calculate reserved bits when loading PDPTRS ...
2019-09-18KVM: coalesced_mmio: add bounds checkingMatt Delco
The first/last indexes are typically shared with a user app. The app can change the 'last' index that the kernel uses to store the next result. This change sanity checks the index before using it for writing to a potentially arbitrary address. This fixes CVE-2019-14821. Cc: stable@vger.kernel.org Fixes: 5f94c1741bdc ("KVM: Add coalesced MMIO support (common part)") Signed-off-by: Matt Delco <delco@chromium.org> Signed-off-by: Jim Mattson <jmattson@google.com> Reported-by: syzbot+983c866c3dd6efa3662a@syzkaller.appspotmail.com [Use READ_ONCE. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-11KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATHZenghui Yu
Commit 49dfe94fe5ad ("KVM: arm/arm64: Fix TRACE_INCLUDE_PATH") fixes TRACE_INCLUDE_PATH to the correct relative path to the define_trace.h and explains why did the old one work. The same fix should be applied to virt/kvm/arm/vgic/trace.h. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-09-09KVM: arm/arm64: vgic: Allow more than 256 vcpus for KVM_IRQ_LINEMarc Zyngier
While parts of the VGIC support a large number of vcpus (we bravely allow up to 512), other parts are more limited. One of these limits is visible in the KVM_IRQ_LINE ioctl, which only allows 256 vcpus to be signalled when using the CPU or PPI types. Unfortunately, we've cornered ourselves badly by allocating all the bits in the irq field. Since the irq_type subfield (8 bit wide) is currently only taking the values 0, 1 and 2 (and we have been careful not to allow anything else), let's reduce this field to only 4 bits, and allocate the remaining 4 bits to a vcpu2_index, which acts as a multiplier: vcpu_id = 256 * vcpu2_index + vcpu_index With that, and a new capability (KVM_CAP_ARM_IRQ_LINE_LAYOUT_2) allowing this to be discovered, it becomes possible to inject PPIs to up to 4096 vcpus. But please just don't. Whilst we're there, add a clarification about the use of KVM_IRQ_LINE on arm, which is not completely conditionned by KVM_CAP_IRQCHIP. Reported-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-28Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Hot on the heels of our last set of fixes are a few more for -rc7. Two of them are fixing issues with our virtual interrupt controller implementation in KVM/arm, while the other is a longstanding but straightforward kallsyms fix which was been acked by Masami and resolves an initialisation failure in kprobes observed on arm64. - Fix GICv2 emulation bug (KVM) - Fix deadlock in virtual GIC interrupt injection code (KVM) - Fix kprobes blacklist init failure due to broken kallsyms lookup" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long kallsyms: Don't let kallsyms_lookup_size_offset() fail on retrieving the first symbol