From 2c06897e4597b1cd68ef29e4145917a751c2b4cd Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 16 May 2013 12:15:35 +0100 Subject: ARM: ux500: Only configure wake-up reasons on ux500 based platforms Multiplatform calls all enabled platforms' initcalls. In the ux500_idle_init() initcall we call into the DBx500-PRCMU which in turn executes some ux500 specific register reads/writes. When running on some !ux500 platforms this ends up causing a kernel Oops. This patch ensures the PRCMU call is only invoked when running on ux500 based platforms. Reported-by: Rob Herring Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpuidle.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c index 317a2be129fb..a45dd09daed9 100644 --- a/arch/arm/mach-ux500/cpuidle.c +++ b/arch/arm/mach-ux500/cpuidle.c @@ -21,6 +21,7 @@ #include #include "db8500-regs.h" +#include "id.h" static atomic_t master = ATOMIC_INIT(0); static DEFINE_SPINLOCK(master_lock); @@ -114,6 +115,9 @@ static struct cpuidle_driver ux500_idle_driver = { int __init ux500_idle_init(void) { + if (!(cpu_is_u8500_family() || cpu_is_ux540_family())) + return -ENODEV; + /* Configure wake up reasons */ prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) | PRCMU_WAKEUP(ABB)); -- cgit v1.2.3 From 67b7c75e1a42f8288450203cd80a26b11dab8582 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 24 May 2013 12:22:19 +0100 Subject: ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3 This patch fixes a bug introduced in the v3.10 merge window. The AB8500 External Regulator driver has recently landed upstream, which registers each of the 3 external regulators located on the AB8500. If these regulators are marked as 'always on', there is a potential for power-loss. If they're not and are seemingly unused the Regulator subsystem will attempt to disable them to save power. This causes an issue for AUX1, AUX2 and AUX3 as they obtain their power from EXT3. So we're specifying that here to prevent EXT3 from being powered down. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-regulators.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 33c353bc1c4a..d6b7c8556fa1 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -374,6 +374,7 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = { static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ [AB8500_LDO_AUX1] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-DISPLAY", .min_uV = 2800000, @@ -387,6 +388,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, /* supplies to the on-board eMMC */ [AB8500_LDO_AUX2] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-eMMC1", .min_uV = 1100000, @@ -402,6 +404,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, /* supply for VAUX3, supplies to SDcard slots */ [AB8500_LDO_AUX3] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-MMC-SD", .min_uV = 1100000, -- cgit v1.2.3