From 7d7db8db67003e4837bbc3f0402b76a225f4eed5 Mon Sep 17 00:00:00 2001 From: Ivan T. Ivanov Date: Thu, 6 Feb 2014 17:28:49 +0200 Subject: ARM: dts: MSM8974: Add pinctrl node Add the pin control node and pin definitions of SPI8. Signed-off-by: Ivan T. Ivanov Reviewed-by: Bjorn Andersson Acked-by: Linus Walleij Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-msm8974.dtsi | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index f68723918b3f..23aa38745037 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -198,5 +198,34 @@ clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + + spi8_default: spi8_default { + mosi { + pins = "gpio45"; + function = "blsp_spi8"; + }; + miso { + pins = "gpio46"; + function = "blsp_spi8"; + }; + cs { + pins = "gpio47"; + function = "blsp_spi8"; + }; + clk { + pins = "gpio48"; + function = "blsp_spi8"; + }; + }; + }; }; }; -- cgit v1.2.3 From 3e944c7693b7eaf0dfc35765e41e8c571fa64707 Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Fri, 31 Jan 2014 16:21:56 +0200 Subject: ARM: dts: msm: Add SDHC controller nodes for MSM8974 and DB8074 board Add support for the 2 SDHC controllers on the DB8074 board. The first controller (at 0xf9824900) is connected to an on board soldered eMMC. The second controller (at 0xf98a4900) is connected to a uSD card slot. Signed-off-by: Georgi Djakov Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 13 +++++++++++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 22 ++++++++++++++++++++++ 2 files changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 13ac3e222495..92320c4a7668 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -3,4 +3,17 @@ / { model = "Qualcomm APQ8074 Dragonboard"; compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; + + soc: soc { + sdhci@f9824900 { + bus-width = <8>; + non-removable; + status = "ok"; + }; + + sdhci@f98a4900 { + cd-gpios = <&msmgpio 62 0x1>; + bus-width = <4>; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 23aa38745037..c530a33a10a0 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -192,6 +192,28 @@ clock-names = "core", "iface"; }; + sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + rng@f9bff000 { compatible = "qcom,prng"; reg = <0xf9bff000 0x200>; -- cgit v1.2.3 From 08f9234ad6b0b8bc51046346eabf5b92e631e62a Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Thu, 24 Apr 2014 11:31:20 -0500 Subject: soc: qcom: Add device tree binding for GSBI Add device tree binding support for the QCOM GSBI driver. Signed-off-by: Andy Gross Signed-off-by: Kumar Gala --- .../devicetree/bindings/soc/qcom/qcom,gsbi.txt | 78 ++++++++++++++++++++++ include/dt-bindings/soc/qcom,gsbi.h | 26 ++++++++ 2 files changed, 104 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt create mode 100644 include/dt-bindings/soc/qcom,gsbi.h diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt new file mode 100644 index 000000000000..4ce24d425bf1 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt @@ -0,0 +1,78 @@ +QCOM GSBI (General Serial Bus Interface) Driver + +The GSBI controller is modeled as a node with zero or more child nodes, each +representing a serial sub-node device that is mux'd as part of the GSBI +configuration settings. The mode setting will govern the input/output mode of +the 4 GSBI IOs. + +Required properties: +- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064 +- reg: Address range for GSBI registers +- clocks: required clock +- clock-names: must contain "iface" entry +- qcom,mode : indicates MUX value for configuration of the serial interface. + Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values. + +Optional properties: +- qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference + dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. + +Required properties if child node exists: +- #address-cells: Must be 1 +- #size-cells: Must be 1 +- ranges: Must be present + +Properties for children: + +A GSBI controller node can contain 0 or more child nodes representing serial +devices. These serial devices can be a QCOM UART, I2C controller, spi +controller, or some combination of aforementioned devices. + +See the following for child node definitions: +Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt +Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt + +Example for APQ8064: + +#include + + gsbi4@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + qcom,mode = ; + qcom,crci = ; + + /* child nodes go under here */ + + i2c_qup4: i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16380000 0x1000>; + interrupts = <0 153 0>; + + clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + + clock-frequency = <200000>; + + #address-cells = <1>; + #size-cells = <0>; + + }; + + uart4: serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <0 152 0x0>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "ok"; + }; + }; + diff --git a/include/dt-bindings/soc/qcom,gsbi.h b/include/dt-bindings/soc/qcom,gsbi.h new file mode 100644 index 000000000000..7ac4292333aa --- /dev/null +++ b/include/dt-bindings/soc/qcom,gsbi.h @@ -0,0 +1,26 @@ +/* Copyright (c) 2013, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __DT_BINDINGS_QCOM_GSBI_H +#define __DT_BINDINGS_QCOM_GSBI_H + +#define GSBI_PROT_IDLE 0 +#define GSBI_PROT_I2C_UIM 1 +#define GSBI_PROT_I2C 2 +#define GSBI_PROT_SPI 3 +#define GSBI_PROT_UART_W_FC 4 +#define GSBI_PROT_UIM 5 +#define GSBI_PROT_I2C_UART 6 + +#define GSBI_CRCI_QUP 0 +#define GSBI_CRCI_UART 1 + +#endif -- cgit v1.2.3