From 46fa8bc08744c373d405a87430e0b3e13ae94b4c Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 13 Apr 2017 19:40:27 +0530 Subject: pwm: tegra: Read PWM clock source rate in driver init It is required to know the PWM clock source frequency to calculate the PWM period. In driver, the clock source frequency of the PWM does not get change and, hence, get the clock source frequency in driver init. Get this values later for period calculation from pwm_config(). This will help in avoiding the clock call for getting clock rate in the pwm_config() each time. Signed-off-by: Laxman Dewangan Signed-off-by: Thierry Reding --- drivers/pwm/pwm-tegra.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index c040f87ee144..8c6ed556db28 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -50,6 +50,8 @@ struct tegra_pwm_chip { struct clk *clk; struct reset_control*rst; + unsigned long clk_rate; + void __iomem *regs; const struct tegra_pwm_soc *soc; @@ -94,7 +96,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, * Compute the prescaler value for which (1 << PWM_DUTY_WIDTH) * cycles at the PWM clock rate will take period_ns nanoseconds. */ - rate = clk_get_rate(pc->clk) >> PWM_DUTY_WIDTH; + rate = pc->clk_rate >> PWM_DUTY_WIDTH; /* Consider precision in PWM_SCALE_WIDTH rate calculation */ hz = DIV_ROUND_CLOSEST_ULL(100ULL * NSEC_PER_SEC, period_ns); @@ -199,6 +201,9 @@ static int tegra_pwm_probe(struct platform_device *pdev) if (IS_ERR(pwm->clk)) return PTR_ERR(pwm->clk); + /* Read PWM clock rate from source */ + pwm->clk_rate = clk_get_rate(pwm->clk); + pwm->rst = devm_reset_control_get(&pdev->dev, "pwm"); if (IS_ERR(pwm->rst)) { ret = PTR_ERR(pwm->rst); -- cgit v1.2.3