From 195f101980dc4c0d0093007d7daac68ec2270f95 Mon Sep 17 00:00:00 2001 From: Marcin Rajwa Date: Mon, 27 Jul 2020 11:36:12 -0700 Subject: ASoC: SOF: Intel: fix the suspend procedure to support s0ix entry This patch fixes the suspend & resume procedure to allow entry into the low power states with some streams being active as a wake source - wake on voice is a perfect example. The current implementation does not stop the CORB/RIRB DMA and does not power down the HDA links. With firmware's help, the platform has been able to still enter s0ix state on older platforms, but the sequence is still incorrect, and the additional driver actions are needed to ensure correct s0ix behaviour. Signed-off-by: Marcin Rajwa Signed-off-by: Keyon Jie Signed-off-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200727183613.1419005-2-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/intel/hda-dsp.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/sound/soc/sof/intel/hda-dsp.c b/sound/soc/sof/intel/hda-dsp.c index 4a40944acaef..89961397010a 100644 --- a/sound/soc/sof/intel/hda-dsp.c +++ b/sound/soc/sof/intel/hda-dsp.c @@ -696,12 +696,35 @@ int hda_dsp_resume(struct snd_sof_dev *sdev) .state = SOF_DSP_PM_D0, .substate = SOF_HDA_DSP_PM_D0I0, }; +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) + struct hdac_bus *bus = sof_to_bus(sdev); + struct hdac_ext_link *hlink = NULL; +#endif int ret; /* resume from D0I3 */ if (sdev->dsp_power_state.state == SOF_DSP_PM_D0) { hda_codec_i915_display_power(sdev, true); +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) + /* power up links that were active before suspend */ + list_for_each_entry(hlink, &bus->hlink_list, list) { + if (hlink->ref_count) { + ret = snd_hdac_ext_bus_link_power_up(hlink); + if (ret < 0) { + dev_dbg(sdev->dev, + "error %x in %s: failed to power up links", + ret, __func__); + return ret; + } + } + } + + /* set up CORB/RIRB buffers if was on before suspend */ + if (bus->cmd_dma_state) + snd_hdac_bus_init_cmd_io(bus); +#endif + /* Set DSP power state */ ret = snd_sof_dsp_set_power_state(sdev, &target_state); if (ret < 0) { @@ -808,6 +831,21 @@ int hda_dsp_suspend(struct snd_sof_dev *sdev, u32 target_state) HDA_VS_INTEL_EM2_L1SEN, HDA_VS_INTEL_EM2_L1SEN); +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) + /* stop the CORB/RIRB DMA if it is On */ + if (bus->cmd_dma_state) + snd_hdac_bus_stop_cmd_io(bus); + + /* no link can be powered in s0ix state */ + ret = snd_hdac_ext_bus_link_power_down_all(bus); + if (ret < 0) { + dev_dbg(sdev->dev, + "error %d in %s: failed to power down links", + ret, __func__); + return ret; + } +#endif + /* enable the system waking up via IPC IRQ */ enable_irq_wake(pci->irq); pci_save_state(pci); -- cgit v1.2.3 From 79560b8aeb01a715f75060e40085e641248bee51 Mon Sep 17 00:00:00 2001 From: Marcin Rajwa Date: Mon, 27 Jul 2020 11:36:13 -0700 Subject: ASoC: SOF: Intel: disable traces when switching to S0Ix D0I3 We should always disable DMA trace on S0Ix. When staying at S0-D0I3, we should enable DMA trace while both DMA Trace debug is enabled and hda_enable_trace_D0I3_S0 is set. This commit corrects the existed logic errors about that. Signed-off-by: Marcin Rajwa Signed-off-by: Keyon Jie Signed-off-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200727183613.1419005-3-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/intel/hda-dsp.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/soc/sof/intel/hda-dsp.c b/sound/soc/sof/intel/hda-dsp.c index 89961397010a..ed4d65a29d3a 100644 --- a/sound/soc/sof/intel/hda-dsp.c +++ b/sound/soc/sof/intel/hda-dsp.c @@ -408,11 +408,13 @@ static int hda_dsp_set_D0_state(struct snd_sof_dev *sdev, value = SOF_HDA_VS_D0I3C_I3; /* - * Trace DMA is disabled by default when the DSP enters D0I3. - * But it can be kept enabled when the DSP enters D0I3 while the - * system is in S0 for debug. + * Trace DMA need to be disabled when the DSP enters + * D0I3 for S0Ix suspend, but it can be kept enabled + * when the DSP enters D0I3 while the system is in S0 + * for debug purpose. */ - if (hda_enable_trace_D0I3_S0 && + if (!sdev->dtrace_is_supported || + !hda_enable_trace_D0I3_S0 || sdev->system_suspend_target != SOF_SUSPEND_NONE) flags = HDA_PM_NO_DMA_TRACE; } else { -- cgit v1.2.3