From 0f92db53c10ab608874eea8bbe59491cea2f9a46 Mon Sep 17 00:00:00 2001 From: John Garry Date: Tue, 26 Jan 2016 19:59:12 +0800 Subject: hisi_sas: add dependency for HAS_IOMEM Not every arch has io, so fix build by adding necessary dependency. Signed-off-by: John Garry Suggested-by: Richard Weinberger Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/hisi_sas/Kconfig b/drivers/scsi/hisi_sas/Kconfig index b67661836c9f..d1dd1616f983 100644 --- a/drivers/scsi/hisi_sas/Kconfig +++ b/drivers/scsi/hisi_sas/Kconfig @@ -1,6 +1,6 @@ config SCSI_HISI_SAS tristate "HiSilicon SAS" - depends on HAS_DMA + depends on HAS_DMA && HAS_IOMEM depends on ARM64 || COMPILE_TEST select SCSI_SAS_LIBSAS select BLK_DEV_INTEGRITY -- cgit v1.2.3 From 0f28ede906a8ad44158a6ef9471a5a412343cced Mon Sep 17 00:00:00 2001 From: John Garry Date: Wed, 27 Jan 2016 01:31:17 +0800 Subject: hisi_sas: fix v1 hw check for slot error Completion header bit CMPLT_HDR_RSPNS_XFRD flags whether the response frame is received into host memory, and not whether the response frame has an error. As such, change the decision on whether a slot has an error. Also redundant check on CMPLT_HDR_CMD_CMPLT_MSK is removed. Fixes: 27a3f229 ("hisi_sas: Add cq interrupt handler") Signed-off-by: John Garry Tested-by: Ricardo Salveti Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c index d54381149c0d..d04808ef6b2b 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c @@ -1293,13 +1293,10 @@ static int slot_complete_v1_hw(struct hisi_hba *hisi_hba, goto out; } - if (cmplt_hdr_data & CMPLT_HDR_ERR_RCRD_XFRD_MSK) { - if (!(cmplt_hdr_data & CMPLT_HDR_CMD_CMPLT_MSK) || - !(cmplt_hdr_data & CMPLT_HDR_RSPNS_XFRD_MSK)) - ts->stat = SAS_DATA_OVERRUN; - else - slot_err_v1_hw(hisi_hba, task, slot); + if (cmplt_hdr_data & CMPLT_HDR_ERR_RCRD_XFRD_MSK && + !(cmplt_hdr_data & CMPLT_HDR_RSPNS_XFRD_MSK)) { + slot_err_v1_hw(hisi_hba, task, slot); goto out; } -- cgit v1.2.3 From d791a8c60e9cbd1c4fecbc5c86ff59c7ffe137e8 Mon Sep 17 00:00:00 2001 From: K. Y. Srinivasan Date: Wed, 27 Jan 2016 18:22:44 -0800 Subject: storvsc: Install the storvsc specific timeout handler for FC devices The default timeout routine used for FC transport is not suitable for FC devices managed by storvsc since FC devices managed by storvsc driver do not have an rport associated with them. Use the time out handler used for SCSI devices for FC devices as well. Signed-off-by: K. Y. Srinivasan Reviewed-by: Alex Ng Tested-by: Vivek Yadav Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/storvsc_drv.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 41c115c230d9..622f64a98a9e 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -42,6 +42,7 @@ #include #include #include +#include /* * All wire protocol details (storage protocol between the guest and the host) @@ -1770,6 +1771,11 @@ static int __init storvsc_drv_init(void) fc_transport_template = fc_attach_transport(&fc_transport_functions); if (!fc_transport_template) return -ENODEV; + + /* + * Install Hyper-V specific timeout handler. + */ + fc_transport_template->eh_timed_out = storvsc_eh_timed_out; #endif ret = vmbus_driver_register(&storvsc_drv); -- cgit v1.2.3 From 98441221708a092eb6d3d05142cf842a95aba152 Mon Sep 17 00:00:00 2001 From: K. Y. Srinivasan Date: Wed, 27 Jan 2016 18:22:45 -0800 Subject: storvsc: Use the specified target ID in device lookup The current code assumes that there is only one target in device lookup. Fix this bug. This will alow us to correctly handle hot reomoval of LUNs. Signed-off-by: K. Y. Srinivasan Reviewed-by: Alex Ng Tested-by: Vivek Yadav Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/storvsc_drv.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 622f64a98a9e..132b16861954 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -478,19 +478,18 @@ struct hv_host_device { struct storvsc_scan_work { struct work_struct work; struct Scsi_Host *host; - uint lun; + u8 lun; + u8 tgt_id; }; static void storvsc_device_scan(struct work_struct *work) { struct storvsc_scan_work *wrk; - uint lun; struct scsi_device *sdev; wrk = container_of(work, struct storvsc_scan_work, work); - lun = wrk->lun; - sdev = scsi_device_lookup(wrk->host, 0, 0, lun); + sdev = scsi_device_lookup(wrk->host, 0, wrk->tgt_id, wrk->lun); if (!sdev) goto done; scsi_rescan_device(&sdev->sdev_gendev); @@ -541,7 +540,7 @@ static void storvsc_remove_lun(struct work_struct *work) if (!scsi_host_get(wrk->host)) goto done; - sdev = scsi_device_lookup(wrk->host, 0, 0, wrk->lun); + sdev = scsi_device_lookup(wrk->host, 0, wrk->tgt_id, wrk->lun); if (sdev) { scsi_remove_device(sdev); @@ -941,6 +940,7 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb, wrk->host = host; wrk->lun = vm_srb->lun; + wrk->tgt_id = vm_srb->target_id; INIT_WORK(&wrk->work, process_err_fn); schedule_work(&wrk->work); } -- cgit v1.2.3 From d2d06d4fe0f2cc2df9b17fefec96e6e1a1271d91 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Fri, 22 Jan 2016 15:42:41 +0100 Subject: scsi_dh_rdac: always retry MODE SELECT on command lock violation If MODE SELECT returns with sense '05/91/36' (command lock violation) it should always be retried without counting the number of retries. During an HBA upgrade or similar circumstances one might see a flood of MODE SELECT command from various HBAs, which will easily trigger the sense code and exceed the retry count. Cc: Signed-off-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/device_handler/scsi_dh_rdac.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 361358134315..93880ed6291c 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -562,7 +562,7 @@ static int mode_select_handle_sense(struct scsi_device *sdev, /* * Command Lock contention */ - err = SCSI_DH_RETRY; + err = SCSI_DH_IMM_RETRY; break; default: break; @@ -612,6 +612,8 @@ retry: err = mode_select_handle_sense(sdev, h->sense); if (err == SCSI_DH_RETRY && retry_cnt--) goto retry; + if (err == SCSI_DH_IMM_RETRY) + goto retry; } if (err == SCSI_DH_OK) { h->state = RDAC_STATE_ACTIVE; -- cgit v1.2.3 From 82c43310508eb19eb41fe7862e89afeb74030b84 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 27 Jan 2016 16:19:13 +0200 Subject: SCSI: Add Marvell Console to VPD blacklist I have a Marvell 88SE9230 SATA Controller that has some sort of integrated console SCSI device attached to one of the ports. ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 ata14.00: configured for UDMA/66 scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5 Sending it VPD INQUIRY command seem to always fail with following error: ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) ata14: hard resetting link This has been minor annoyance (only error printed on dmesg) until commit 09e2b0b14690 ("scsi: rescan VPD attributes") added call to scsi_attach_vpd() in scsi_rescan_device(). The commit causes the system to splat out following errors continuously without ever reaching the UI: ata14.00: configured for UDMA/66 ata14: EH complete ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 6 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) ata14: hard resetting link ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: configured for UDMA/66 ata14: EH complete ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 7 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) Without in-depth understanding of SCSI layer and the Marvell controller, I suspect this happens because when the link goes down (because of an error) we schedule scsi_rescan_device() which again fails to read VPD data... ad infinitum. Since VPD data cannot be read from the device anyway we prevent the SCSI layer from even trying by blacklisting the device. This gets away the error and the system starts up normally. [mkp: Widened the match to all revisions of this device] Cc: Signed-off-by: Mika Westerberg Reported-by: Kirill A. Shutemov Reported-by: Alexander Duyck Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_devinfo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 2c1160c7ec92..820416665324 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -205,6 +205,7 @@ static struct { {"Intel", "Multi-Flex", NULL, BLIST_NO_RSOC}, {"iRiver", "iFP Mass Driver", NULL, BLIST_NOT_LOCKABLE | BLIST_INQUIRY_36}, {"LASOUND", "CDX7405", "3.10", BLIST_MAX5LUN | BLIST_SINGLELUN}, + {"Marvell", "Console", NULL, BLIST_SKIP_VPD_PAGES}, {"MATSHITA", "PD-1", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, {"MATSHITA", "DMC-LC5", NULL, BLIST_NOT_LOCKABLE | BLIST_INQUIRY_36}, {"MATSHITA", "DMC-LC40", NULL, BLIST_NOT_LOCKABLE | BLIST_INQUIRY_36}, -- cgit v1.2.3 From 0fb5b1fb30fba3671dd5b1489d78e93e08d62e4e Mon Sep 17 00:00:00 2001 From: Martin K. Petersen Date: Thu, 4 Feb 2016 00:52:12 -0500 Subject: block/sd: Return -EREMOTEIO when WRITE SAME and DISCARD are disabled When a storage device rejects a WRITE SAME command we will disable write same functionality for the device and return -EREMOTEIO to the block layer. -EREMOTEIO will in turn prevent DM from retrying the I/O and/or failing the path. Yiwen Jiang discovered a small race where WRITE SAME requests issued simultaneously would cause -EIO to be returned. This happened because any requests being prepared after WRITE SAME had been disabled for the device caused us to return BLKPREP_KILL. The latter caused the block layer to return -EIO upon completion. To overcome this we introduce BLKPREP_INVALID which indicates that this is an invalid request for the device. blk_peek_request() is modified to return -EREMOTEIO in that case. Reported-by: Yiwen Jiang Suggested-by: Mike Snitzer Reviewed-by: Hannes Reinicke Reviewed-by: Ewan Milne Reviewed-by: Yiwen Jiang Signed-off-by: Martin K. Petersen --- block/blk-core.c | 6 ++++-- drivers/scsi/sd.c | 4 ++-- include/linux/blkdev.h | 9 ++++++--- 3 files changed, 12 insertions(+), 7 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 476244d59309..35607dd0223b 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2447,14 +2447,16 @@ struct request *blk_peek_request(struct request_queue *q) rq = NULL; break; - } else if (ret == BLKPREP_KILL) { + } else if (ret == BLKPREP_KILL || ret == BLKPREP_INVALID) { + int err = (ret == BLKPREP_INVALID) ? -EREMOTEIO : -EIO; + rq->cmd_flags |= REQ_QUIET; /* * Mark this request as started so we don't trigger * any debug logic in the end I/O path. */ blk_start_request(rq); - __blk_end_request_all(rq, -EIO); + __blk_end_request_all(rq, err); } else { printk(KERN_ERR "%s: bad return=%d\n", __func__, ret); break; diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index ec163d08f6c3..6e841c6da632 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -761,7 +761,7 @@ static int sd_setup_discard_cmnd(struct scsi_cmnd *cmd) break; default: - ret = BLKPREP_KILL; + ret = BLKPREP_INVALID; goto out; } @@ -839,7 +839,7 @@ static int sd_setup_write_same_cmnd(struct scsi_cmnd *cmd) int ret; if (sdkp->device->no_write_same) - return BLKPREP_KILL; + return BLKPREP_INVALID; BUG_ON(bio_offset(bio) || bio_iovec(bio).bv_len != sdp->sector_size); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index d372ea87ead5..a9b643a0647f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -681,9 +681,12 @@ static inline bool blk_write_same_mergeable(struct bio *a, struct bio *b) /* * q->prep_rq_fn return values */ -#define BLKPREP_OK 0 /* serve it */ -#define BLKPREP_KILL 1 /* fatal error, kill */ -#define BLKPREP_DEFER 2 /* leave on queue */ +enum { + BLKPREP_OK, /* serve it */ + BLKPREP_KILL, /* fatal error, kill, return -EIO */ + BLKPREP_DEFER, /* leave on queue */ + BLKPREP_INVALID, /* invalid command, kill, return -EREMOTEIO */ +}; extern unsigned long blk_max_low_pfn, blk_max_pfn; -- cgit v1.2.3