From 557b06971b1f05cbadec2f376a305ee1954e9b0d Mon Sep 17 00:00:00 2001
From: Harald Welte
Date: Thu, 18 Jun 2009 16:53:38 +0200
Subject: sdhci: Specific quirk vor VIA SDHCI controller in VX855ES

The SDHCI controller found in the VX855ES requires 10ms
delay between applying power and applying clock.

This issue has been discovered and documented by the OLPC XO1.5 team.

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
---
 drivers/mmc/host/sdhci-pci.c | 20 ++++++++++++++++++++
 drivers/mmc/host/sdhci.c     |  7 +++++++
 drivers/mmc/host/sdhci.h     |  2 ++
 3 files changed, 29 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 65be27995d5c..2f15cc17d887 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -284,6 +284,18 @@ static const struct sdhci_pci_fixes sdhci_jmicron = {
 	.resume		= jmicron_resume,
 };
 
+static int via_probe(struct sdhci_pci_chip *chip)
+{
+	if (chip->pdev->revision == 0x10)
+		chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
+
+	return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_via = {
+	.probe		= via_probe,
+};
+
 static const struct pci_device_id pci_ids[] __devinitdata = {
 	{
 		.vendor		= PCI_VENDOR_ID_RICOH,
@@ -349,6 +361,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 		.driver_data	= (kernel_ulong_t)&sdhci_jmicron,
 	},
 
+	{
+		.vendor		= PCI_VENDOR_ID_VIA,
+		.device		= 0x95d0,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_via,
+	},
+
 	{	/* Generic SD host controller */
 		PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
 	},
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c7586739be1e..f4066fdc8906 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1057,6 +1057,13 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	pwr |= SDHCI_POWER_ON;
 
 	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
+	/*
+	 * Some controllers need an extra 10ms delay of 10ms before they
+	 * can apply clock after applying power
+	 */
+	if ((host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER))
+		mdelay(10);
 }
 
 /*****************************************************************************\
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 5d37dd94b53f..831ddf7dcb49 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -230,6 +230,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
 /* Controller can only handle 1-bit data transfers */
 #define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
+/* Controller needs 10ms delay between applying power and clock */
+#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
 
 	int			irq;		/* Device IRQ */
 	void __iomem *		ioaddr;		/* Mapped address */
-- 
cgit v1.2.3