From 5afc8b84eb7b29e4646d6e8ca7e6d7196031d6f7 Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Wed, 26 Sep 2012 02:39:37 +0000 Subject: cxgb4: Add functions to read memory via PCIE memory window This patch implements two new functions t4_mem_win_read and t4_memory_read. These new functions can be used to read memory via the PCIE memory window. Please note, for proper execution of these functions PCIE_MEM_ACCESS_BASE_WIN registers must be setup correctly like how setup_memwin in the cxgb4 driver does it. Signed-off-by: Jay Hernandez Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 2 + drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 137 +++++++++++++++++++++++++++++ drivers/net/ethernet/chelsio/cxgb4/t4_hw.h | 80 +++++++++++++++++ 3 files changed, 219 insertions(+) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index f3fe23669f8a..7de740a8b764 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -664,6 +664,8 @@ int t4_wait_dev_ready(struct adapter *adap); int t4_link_start(struct adapter *adap, unsigned int mbox, unsigned int port, struct link_config *lc); int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port); +int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len, + __be32 *buf); int t4_seeprom_wp(struct adapter *adapter, bool enable); int t4_load_fw(struct adapter *adapter, const u8 *fw_data, unsigned int size); int t4_check_fw_version(struct adapter *adapter); diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 8e988d699d05..259d0dcb0089 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -330,6 +330,143 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc) return 0; } +/* + * t4_mem_win_rw - read/write memory through PCIE memory window + * @adap: the adapter + * @addr: address of first byte requested + * @data: MEMWIN0_APERTURE bytes of data containing the requested address + * @dir: direction of transfer 1 => read, 0 => write + * + * Read/write MEMWIN0_APERTURE bytes of data from MC starting at a + * MEMWIN0_APERTURE-byte-aligned address that covers the requested + * address @addr. + */ +static int t4_mem_win_rw(struct adapter *adap, u32 addr, __be32 *data, int dir) +{ + int i; + + /* + * Setup offset into PCIE memory window. Address must be a + * MEMWIN0_APERTURE-byte-aligned address. (Read back MA register to + * ensure that changes propagate before we attempt to use the new + * values.) + */ + t4_write_reg(adap, PCIE_MEM_ACCESS_OFFSET, + addr & ~(MEMWIN0_APERTURE - 1)); + t4_read_reg(adap, PCIE_MEM_ACCESS_OFFSET); + + /* Collecting data 4 bytes at a time upto MEMWIN0_APERTURE */ + for (i = 0; i < MEMWIN0_APERTURE; i = i+0x4) { + if (dir) + *data++ = t4_read_reg(adap, (MEMWIN0_BASE + i)); + else + t4_write_reg(adap, (MEMWIN0_BASE + i), *data++); + } + + return 0; +} + +/** + * t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window + * @adap: the adapter + * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC + * @addr: address within indicated memory type + * @len: amount of memory to transfer + * @buf: host memory buffer + * @dir: direction of transfer 1 => read, 0 => write + * + * Reads/writes an [almost] arbitrary memory region in the firmware: the + * firmware memory address, length and host buffer must be aligned on + * 32-bit boudaries. The memory is transferred as a raw byte sequence + * from/to the firmware's memory. If this memory contains data + * structures which contain multi-byte integers, it's the callers + * responsibility to perform appropriate byte order conversions. + */ +static int t4_memory_rw(struct adapter *adap, int mtype, u32 addr, u32 len, + __be32 *buf, int dir) +{ + u32 pos, start, end, offset, memoffset; + int ret; + + /* + * Argument sanity checks ... + */ + if ((addr & 0x3) || (len & 0x3)) + return -EINVAL; + + /* + * Offset into the region of memory which is being accessed + * MEM_EDC0 = 0 + * MEM_EDC1 = 1 + * MEM_MC = 2 + */ + memoffset = (mtype * (5 * 1024 * 1024)); + + /* Determine the PCIE_MEM_ACCESS_OFFSET */ + addr = addr + memoffset; + + /* + * The underlaying EDC/MC read routines read MEMWIN0_APERTURE bytes + * at a time so we need to round down the start and round up the end. + * We'll start copying out of the first line at (addr - start) a word + * at a time. + */ + start = addr & ~(MEMWIN0_APERTURE-1); + end = (addr + len + MEMWIN0_APERTURE-1) & ~(MEMWIN0_APERTURE-1); + offset = (addr - start)/sizeof(__be32); + + for (pos = start; pos < end; pos += MEMWIN0_APERTURE, offset = 0) { + __be32 data[MEMWIN0_APERTURE/sizeof(__be32)]; + + /* + * If we're writing, copy the data from the caller's memory + * buffer + */ + if (!dir) { + /* + * If we're doing a partial write, then we need to do + * a read-modify-write ... + */ + if (offset || len < MEMWIN0_APERTURE) { + ret = t4_mem_win_rw(adap, pos, data, 1); + if (ret) + return ret; + } + while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) && + len > 0) { + data[offset++] = *buf++; + len -= sizeof(__be32); + } + } + + /* + * Transfer a block of memory and bail if there's an error. + */ + ret = t4_mem_win_rw(adap, pos, data, dir); + if (ret) + return ret; + + /* + * If we're reading, copy the data into the caller's memory + * buffer. + */ + if (dir) + while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) && + len > 0) { + *buf++ = data[offset++]; + len -= sizeof(__be32); + } + } + + return 0; +} + +int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len, + __be32 *buf) +{ + return t4_memory_rw(adap, mtype, addr, len, buf, 0); +} + #define EEPROM_STAT_ADDR 0x7bfc #define VPD_BASE 0 #define VPD_LEN 512 diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h index c26b455f37de..f534ed7e10e9 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h @@ -58,6 +58,7 @@ enum { enum { SF_PAGE_SIZE = 256, /* serial flash page size */ + SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */ }; enum { RSP_TYPE_FLBUF, RSP_TYPE_CPL, RSP_TYPE_INTR }; /* response entry types */ @@ -137,4 +138,83 @@ struct rsp_ctrl { #define QINTR_CNT_EN 0x1 #define QINTR_TIMER_IDX(x) ((x) << 1) #define QINTR_TIMER_IDX_GET(x) (((x) >> 1) & 0x7) + +/* + * Flash layout. + */ +#define FLASH_START(start) ((start) * SF_SEC_SIZE) +#define FLASH_MAX_SIZE(nsecs) ((nsecs) * SF_SEC_SIZE) + +enum { + /* + * Various Expansion-ROM boot images, etc. + */ + FLASH_EXP_ROM_START_SEC = 0, + FLASH_EXP_ROM_NSECS = 6, + FLASH_EXP_ROM_START = FLASH_START(FLASH_EXP_ROM_START_SEC), + FLASH_EXP_ROM_MAX_SIZE = FLASH_MAX_SIZE(FLASH_EXP_ROM_NSECS), + + /* + * iSCSI Boot Firmware Table (iBFT) and other driver-related + * parameters ... + */ + FLASH_IBFT_START_SEC = 6, + FLASH_IBFT_NSECS = 1, + FLASH_IBFT_START = FLASH_START(FLASH_IBFT_START_SEC), + FLASH_IBFT_MAX_SIZE = FLASH_MAX_SIZE(FLASH_IBFT_NSECS), + + /* + * Boot configuration data. + */ + FLASH_BOOTCFG_START_SEC = 7, + FLASH_BOOTCFG_NSECS = 1, + FLASH_BOOTCFG_START = FLASH_START(FLASH_BOOTCFG_START_SEC), + FLASH_BOOTCFG_MAX_SIZE = FLASH_MAX_SIZE(FLASH_BOOTCFG_NSECS), + + /* + * Location of firmware image in FLASH. + */ + FLASH_FW_START_SEC = 8, + FLASH_FW_NSECS = 8, + FLASH_FW_START = FLASH_START(FLASH_FW_START_SEC), + FLASH_FW_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FW_NSECS), + + /* + * iSCSI persistent/crash information. + */ + FLASH_ISCSI_CRASH_START_SEC = 29, + FLASH_ISCSI_CRASH_NSECS = 1, + FLASH_ISCSI_CRASH_START = FLASH_START(FLASH_ISCSI_CRASH_START_SEC), + FLASH_ISCSI_CRASH_MAX_SIZE = FLASH_MAX_SIZE(FLASH_ISCSI_CRASH_NSECS), + + /* + * FCoE persistent/crash information. + */ + FLASH_FCOE_CRASH_START_SEC = 30, + FLASH_FCOE_CRASH_NSECS = 1, + FLASH_FCOE_CRASH_START = FLASH_START(FLASH_FCOE_CRASH_START_SEC), + FLASH_FCOE_CRASH_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FCOE_CRASH_NSECS), + + /* + * Location of Firmware Configuration File in FLASH. Since the FPGA + * "FLASH" is smaller we need to store the Configuration File in a + * different location -- which will overlap the end of the firmware + * image if firmware ever gets that large ... + */ + FLASH_CFG_START_SEC = 31, + FLASH_CFG_NSECS = 1, + FLASH_CFG_START = FLASH_START(FLASH_CFG_START_SEC), + FLASH_CFG_MAX_SIZE = FLASH_MAX_SIZE(FLASH_CFG_NSECS), + + FLASH_FPGA_CFG_START_SEC = 15, + FLASH_FPGA_CFG_START = FLASH_START(FLASH_FPGA_CFG_START_SEC), + + /* + * Sectors 32-63 are reserved for FLASH failover. + */ +}; + +#undef FLASH_START +#undef FLASH_MAX_SIZE + #endif /* __T4_HW_H */ -- cgit v1.2.3