From fded332bf40349788c83399751fd3764fddc4b51 Mon Sep 17 00:00:00 2001
From: Michael Schmitz
Date: Mon, 31 Mar 2014 21:06:05 +1300
Subject: m68k/atari - stram: alloc ST-RAM pool even if kernel not in ST-RAM

With the kernel loaded to FastRAM (TT-RAM), none of the ST-RAM
address range is mapped by init_mem, and ST-RAM is not accessible
through the normal allocation pathways as a result.

Implement ST-RAM pool allocation to be based on physical addresses
always (it already was when the kernel was loaded in ST-RAM).
Return kernel virtual addresses as per normal.

The current test for the kernel residing in ST-RAM always returns
true. Use the bootinfo memory chunk order instead - with the kernel
in FastRAM, ST-RAM (phys. 0x0) is not the first chunk.

In case the kernel is running from FastRAM, delay mapping of ST-RAM
pool until after mem_init.

Provide helper functions for those users of ST-RAM that need
to be aware of the backing physical addresses.

Kudos to Geert for his hints on getting this started.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/atari/stram.c             | 71 ++++++++++++++++++++++++++++---------
 arch/m68k/include/asm/atari_stram.h |  2 ++
 2 files changed, 56 insertions(+), 17 deletions(-)

diff --git a/arch/m68k/atari/stram.c b/arch/m68k/atari/stram.c
index 0810c8d56e59..5f8cb5a234d9 100644
--- a/arch/m68k/atari/stram.c
+++ b/arch/m68k/atari/stram.c
@@ -47,6 +47,7 @@ static struct resource stram_pool = {
 
 static unsigned long pool_size = 1024*1024;
 
+static unsigned long stram_virt_offset;
 
 static int __init atari_stram_setup(char *arg)
 {
@@ -67,14 +68,12 @@ early_param("stram_pool", atari_stram_setup);
 void __init atari_stram_init(void)
 {
 	int i;
-	void *stram_start;
 
 	/*
 	 * determine whether kernel code resides in ST-RAM
 	 * (then ST-RAM is the first memory block at virtual 0x0)
 	 */
-	stram_start = phys_to_virt(0);
-	kernel_in_stram = (stram_start == 0);
+	kernel_in_stram = (m68k_memory[0].addr == 0);
 
 	for (i = 0; i < m68k_num_memory; ++i) {
 		if (m68k_memory[i].addr == 0) {
@@ -89,24 +88,62 @@ void __init atari_stram_init(void)
 
 /*
  * This function is called from setup_arch() to reserve the pages needed for
- * ST-RAM management.
+ * ST-RAM management, if the kernel resides in ST-RAM.
  */
 void __init atari_stram_reserve_pages(void *start_mem)
 {
-	/*
-	 * always reserve first page of ST-RAM, the first 2 KiB are
-	 * supervisor-only!
-	 */
-	if (!kernel_in_stram)
-		reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT);
+	if (kernel_in_stram) {
+		pr_debug("atari_stram pool: kernel in ST-RAM, using alloc_bootmem!\n");
+		stram_pool.start = (resource_size_t)alloc_bootmem_low_pages(pool_size);
+		stram_pool.end = stram_pool.start + pool_size - 1;
+		request_resource(&iomem_resource, &stram_pool);
+		stram_virt_offset = 0;
+		pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n",
+			pool_size, &stram_pool);
+		pr_debug("atari_stram pool: stram_virt_offset = %lx\n",
+			stram_virt_offset);
+	}
+}
 
-	stram_pool.start = (resource_size_t)alloc_bootmem_low_pages(pool_size);
-	stram_pool.end = stram_pool.start + pool_size - 1;
-	request_resource(&iomem_resource, &stram_pool);
 
-	pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n",
-		 pool_size, &stram_pool);
+/*
+ * This function is called as arch initcall to reserve the pages needed for
+ * ST-RAM management, if the kernel does not reside in ST-RAM.
+ */
+int __init atari_stram_map_pages(void)
+{
+	if (!kernel_in_stram) {
+		/*
+		 * Skip page 0, as the fhe first 2 KiB are supervisor-only!
+		 */
+		pr_debug("atari_stram pool: kernel not in ST-RAM, using ioremap!\n");
+		stram_pool.start = PAGE_SIZE;
+		stram_pool.end = stram_pool.start + pool_size - 1;
+		request_resource(&iomem_resource, &stram_pool);
+		stram_virt_offset = (unsigned long) ioremap(stram_pool.start,
+				resource_size(&stram_pool)) - stram_pool.start;
+		pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n",
+			pool_size, &stram_pool);
+		pr_debug("atari_stram pool: stram_virt_offset = %lx\n",
+			stram_virt_offset);
+	}
+	return 0;
+}
+arch_initcall(atari_stram_map_pages);
+
+
+void *atari_stram_to_virt(unsigned long phys)
+{
+	return (void *)(phys + stram_virt_offset);
+}
+EXPORT_SYMBOL(atari_stram_to_virt);
+
+
+unsigned long atari_stram_to_phys(void *virt)
+{
+	return (unsigned long)(virt - stram_virt_offset);
 }
+EXPORT_SYMBOL(atari_stram_to_phys);
 
 
 void *atari_stram_alloc(unsigned long size, const char *owner)
@@ -134,14 +171,14 @@ void *atari_stram_alloc(unsigned long size, const char *owner)
 	}
 
 	pr_debug("atari_stram_alloc: returning %pR\n", res);
-	return (void *)res->start;
+	return atari_stram_to_virt(res->start);
 }
 EXPORT_SYMBOL(atari_stram_alloc);
 
 
 void atari_stram_free(void *addr)
 {
-	unsigned long start = (unsigned long)addr;
+	unsigned long start = atari_stram_to_phys(addr);
 	struct resource *res;
 	unsigned long size;
 
diff --git a/arch/m68k/include/asm/atari_stram.h b/arch/m68k/include/asm/atari_stram.h
index 62e27598af91..4e771c22d6a9 100644
--- a/arch/m68k/include/asm/atari_stram.h
+++ b/arch/m68k/include/asm/atari_stram.h
@@ -8,6 +8,8 @@
 /* public interface */
 void *atari_stram_alloc(unsigned long size, const char *owner);
 void atari_stram_free(void *);
+void *atari_stram_to_virt(unsigned long phys);
+unsigned long atari_stram_to_phys(void *);
 
 /* functions called internally by other parts of the kernel */
 void atari_stram_init(void);
-- 
cgit v1.2.3


From cf8c8781d97e514cceb520252c2c78f853e951cd Mon Sep 17 00:00:00 2001
From: Michael Schmitz
Date: Mon, 31 Mar 2014 21:06:06 +1300
Subject: m68k/atari - atafb: convert allocation of fb ram to new interface

The new atari_stram_alloc interface returns kernel virtual addresses
even if the kernel runs in FastRAM. These addresses are not
guaranteed to be identical with the physical addresses. Since ST-RAM
mappings have not been set up by mem_init, virt_to_phys() and its
cousin do not work and the atari_stram_to_phys() etc. helpers must
be used to determine physical addresses.

fb.fix->smem_start needs physical addresses, fb.par->screen_base
needs virtual addresses. Take care of the virt-to-phys conversion
both on fb init and par changes.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/video/fbdev/atafb.c | 49 ++++++++++++++++++++++++---------------------
 1 file changed, 26 insertions(+), 23 deletions(-)

diff --git a/drivers/video/fbdev/atafb.c b/drivers/video/fbdev/atafb.c
index e21d1f58554c..4953b657635e 100644
--- a/drivers/video/fbdev/atafb.c
+++ b/drivers/video/fbdev/atafb.c
@@ -191,7 +191,7 @@ static struct fb_info fb_info = {
 };
 
 static void *screen_base;	/* base address of screen */
-static void *real_screen_base;	/* (only for Overscan) */
+static unsigned long phys_screen_base;	/* (only for Overscan) */
 
 static int screen_len;
 
@@ -213,7 +213,8 @@ static unsigned int external_yres;
  */
 static unsigned int external_depth;
 static int external_pmode;
-static void *external_addr;
+static void *external_screen_base;
+static unsigned long external_addr;
 static unsigned long external_len;
 static unsigned long external_vgaiobase;
 static unsigned int external_bitspercol = 6;
@@ -592,7 +593,7 @@ static int tt_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par)
 	int mode;
 
 	strcpy(fix->id, "Atari Builtin");
-	fix->smem_start = (unsigned long)real_screen_base;
+	fix->smem_start = phys_screen_base;
 	fix->smem_len = screen_len;
 	fix->type = FB_TYPE_INTERLEAVED_PLANES;
 	fix->type_aux = 2;
@@ -790,7 +791,7 @@ static void tt_get_par(struct atafb_par *par)
 	addr = ((shifter.bas_hi & 0xff) << 16) |
 	       ((shifter.bas_md & 0xff) << 8)  |
 	       ((shifter.bas_lo & 0xff));
-	par->screen_base = phys_to_virt(addr);
+	par->screen_base = atari_stram_to_virt(addr);
 }
 
 static void tt_set_par(struct atafb_par *par)
@@ -888,7 +889,7 @@ static int falcon_encode_fix(struct fb_fix_screeninfo *fix,
 			     struct atafb_par *par)
 {
 	strcpy(fix->id, "Atari Builtin");
-	fix->smem_start = (unsigned long)real_screen_base;
+	fix->smem_start = phys_screen_base;
 	fix->smem_len = screen_len;
 	fix->type = FB_TYPE_INTERLEAVED_PLANES;
 	fix->type_aux = 2;
@@ -1584,7 +1585,7 @@ static void falcon_get_par(struct atafb_par *par)
 	addr = (shifter.bas_hi & 0xff) << 16 |
 	       (shifter.bas_md & 0xff) << 8  |
 	       (shifter.bas_lo & 0xff);
-	par->screen_base = phys_to_virt(addr);
+	par->screen_base = atari_stram_to_virt(addr);
 
 	/* derived parameters */
 	hw->ste_mode = (hw->f_shift & 0x510) == 0 && hw->st_shift == 0x100;
@@ -1814,7 +1815,7 @@ static int stste_encode_fix(struct fb_fix_screeninfo *fix,
 	int mode;
 
 	strcpy(fix->id, "Atari Builtin");
-	fix->smem_start = (unsigned long)real_screen_base;
+	fix->smem_start = phys_screen_base;
 	fix->smem_len = screen_len;
 	fix->type = FB_TYPE_INTERLEAVED_PLANES;
 	fix->type_aux = 2;
@@ -1980,7 +1981,7 @@ static void stste_get_par(struct atafb_par *par)
 	       ((shifter.bas_md & 0xff) << 8);
 	if (ATARIHW_PRESENT(EXTD_SHIFTER))
 		addr |= (shifter.bas_lo & 0xff);
-	par->screen_base = phys_to_virt(addr);
+	par->screen_base = atari_stram_to_virt(addr);
 }
 
 static void stste_set_par(struct atafb_par *par)
@@ -2039,7 +2040,7 @@ static int stste_detect(void)
 static void stste_set_screen_base(void *s_base)
 {
 	unsigned long addr;
-	addr = virt_to_phys(s_base);
+	addr = atari_stram_to_phys(s_base);
 	/* Setup Screen Memory */
 	shifter.bas_hi = (unsigned char)((addr & 0xff0000) >> 16);
 	shifter.bas_md = (unsigned char)((addr & 0x00ff00) >> 8);
@@ -2113,7 +2114,7 @@ static void st_ovsc_switch(void)
 static int ext_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par)
 {
 	strcpy(fix->id, "Unknown Extern");
-	fix->smem_start = (unsigned long)external_addr;
+	fix->smem_start = external_addr;
 	fix->smem_len = PAGE_ALIGN(external_len);
 	if (external_depth == 1) {
 		fix->type = FB_TYPE_PACKED_PIXELS;
@@ -2213,7 +2214,7 @@ static int ext_encode_var(struct fb_var_screeninfo *var, struct atafb_par *par)
 
 static void ext_get_par(struct atafb_par *par)
 {
-	par->screen_base = external_addr;
+	par->screen_base = external_screen_base;
 }
 
 static void ext_set_par(struct atafb_par *par)
@@ -2286,7 +2287,7 @@ static void set_screen_base(void *s_base)
 {
 	unsigned long addr;
 
-	addr = virt_to_phys(s_base);
+	addr = atari_stram_to_phys(s_base);
 	/* Setup Screen Memory */
 	shifter.bas_hi = (unsigned char)((addr & 0xff0000) >> 16);
 	shifter.bas_md = (unsigned char)((addr & 0x00ff00) >> 8);
@@ -2433,7 +2434,9 @@ static void atafb_set_disp(struct fb_info *info)
 	atafb_get_var(&info->var, info);
 	atafb_get_fix(&info->fix, info);
 
-	info->screen_base = (void *)info->fix.smem_start;
+	/* Note: smem_start derives from phys_screen_base, not screen_base! */
+	info->screen_base = (external_addr ? external_screen_base :
+				atari_stram_to_virt(info->fix.smem_start));
 }
 
 static int atafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
@@ -2904,7 +2907,7 @@ static void __init atafb_setup_ext(char *spec)
 	external_yres = yres;
 	external_depth = depth;
 	external_pmode = planes;
-	external_addr = (void *)addr;
+	external_addr = addr;
 	external_len = len;
 
 	if (external_card_type == IS_MV300) {
@@ -3166,30 +3169,30 @@ int __init atafb_init(void)
 		memset(screen_base, 0, mem_req);
 		pad = -(unsigned long)screen_base & (PAGE_SIZE - 1);
 		screen_base += pad;
-		real_screen_base = screen_base + ovsc_offset;
+		phys_screen_base = atari_stram_to_phys(screen_base + ovsc_offset);
 		screen_len = (mem_req - pad - ovsc_offset) & PAGE_MASK;
 		st_ovsc_switch();
 		if (CPU_IS_040_OR_060) {
 			/* On a '040+, the cache mode of video RAM must be set to
 			 * write-through also for internal video hardware! */
-			cache_push(virt_to_phys(screen_base), screen_len);
+			cache_push(atari_stram_to_phys(screen_base), screen_len);
 			kernel_set_cachemode(screen_base, screen_len,
 					     IOMAP_WRITETHROUGH);
 		}
-		printk("atafb: screen_base %p real_screen_base %p screen_len %d\n",
-			screen_base, real_screen_base, screen_len);
+		printk("atafb: screen_base %p phys_screen_base %lx screen_len %d\n",
+			screen_base, phys_screen_base, screen_len);
 #ifdef ATAFB_EXT
 	} else {
 		/* Map the video memory (physical address given) to somewhere
 		 * in the kernel address space.
 		 */
-		external_addr = ioremap_writethrough((unsigned long)external_addr,
+		external_screen_base = ioremap_writethrough(external_addr,
 						     external_len);
 		if (external_vgaiobase)
 			external_vgaiobase =
 			  (unsigned long)ioremap(external_vgaiobase, 0x10000);
-		screen_base =
-		real_screen_base = external_addr;
+		screen_base = external_screen_base;
+		phys_screen_base = external_addr;
 		screen_len = external_len & PAGE_MASK;
 		memset (screen_base, 0, external_len);
 	}
@@ -3235,8 +3238,8 @@ int __init atafb_init(void)
 	if (register_framebuffer(&fb_info) < 0) {
 #ifdef ATAFB_EXT
 		if (external_addr) {
-			iounmap(external_addr);
-			external_addr = NULL;
+			iounmap(external_screen_base);
+			external_addr = 0;
 		}
 		if (external_vgaiobase) {
 			iounmap((void*)external_vgaiobase);
-- 
cgit v1.2.3


From a4de73fbcf10c1d64bf4f66ca1c4bcb08e4fac87 Mon Sep 17 00:00:00 2001
From: Michael Schmitz
Date: Mon, 31 Mar 2014 21:06:07 +1300
Subject: m68k/atari - ataflop: use correct virt/phys translation for DMA
 buffer

With the kernel running from FastRAM instead of ST-RAM, none of ST-RAM is
mapped by mem_init, and DMA-addressable buffer must be mapped by ioremap.

Use platform specific virt/phys translation helpers for this case.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/block/ataflop.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 96b629e1f0c9..cfa64bdf01c9 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1952,7 +1952,7 @@ static int __init atari_floppy_init (void)
 		goto Enomem;
 	}
 	TrackBuffer = DMABuffer + 512;
-	PhysDMABuffer = virt_to_phys(DMABuffer);
+	PhysDMABuffer = atari_stram_to_phys(DMABuffer);
 	PhysTrackBuffer = virt_to_phys(TrackBuffer);
 	BufferDrive = BufferSide = BufferTrack = -1;
 
-- 
cgit v1.2.3


From a19f8165dcec3e47486f6aa5ddb72d13bb31bdf6 Mon Sep 17 00:00:00 2001
From: Michael Schmitz
Date: Mon, 31 Mar 2014 21:06:08 +1300
Subject: m68k/atari - atari_scsi: use correct virt/phys translation for DMA
 buffer

With the kernel running from FastRAM instead of ST-RAM, none of ST-RAM is
mapped by mem_init, and DMA-addressable buffer must be mapped by ioremap.

Use platform specific virt/phys translation helpers for this case.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/scsi/atari_scsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index 296c936cc03c..a8d721ff19eb 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -639,7 +639,7 @@ static int __init atari_scsi_detect(struct scsi_host_template *host)
 					"double buffer\n");
 			return 0;
 		}
-		atari_dma_phys_buffer = virt_to_phys(atari_dma_buffer);
+		atari_dma_phys_buffer = atari_stram_to_phys(atari_dma_buffer);
 		atari_dma_orig_addr = 0;
 	}
 #endif
-- 
cgit v1.2.3


From 97f3f68c21fb5edaf4503b9aef6beefddf316d76 Mon Sep 17 00:00:00 2001
From: Finn Thain
Date: Fri, 11 Apr 2014 15:27:58 +1000
Subject: m68k: Toward platform agnostic framebuffer debug logging

Code subject to #ifdef CONSOLE is made more generic, as was apparently
intended by the original author.

Remove console_put_stats() routine. If it should be somehow useful, it
should also be useful on platforms without framebuffer debug logging. The
present implementation is only built #if defined CONFIG_MAC && defined
CONSOLE even though puts() works everywhere.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stephen N Chivers <schivers@csc.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/kernel/head.S | 112 +++++++++++-------------------------------------
 1 file changed, 26 insertions(+), 86 deletions(-)

diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index 3ab329b88521..81e610bfa237 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -153,7 +153,7 @@
  * ------------
  *	The console is also able to be turned off.  The console in head.S
  * is specifically for debugging and can be very useful.  It is surrounded by
- * #ifdef CONSOLE/#endif clauses so it doesn't have to ship in known-good
+ * #ifdef / #endif clauses so it doesn't have to ship in known-good
  * kernels.  It's basic algorithm is to determine the size of the screen
  * (in height/width and bit depth) and then use that information for
  * displaying an 8x8 font or an 8x16 (widthxheight).  I prefer the 8x8 for
@@ -198,9 +198,8 @@
  * CONFIG_xxx:	These are the obvious machine configuration defines created
  * during configuration.  These are defined in autoconf.h.
  *
- * CONSOLE:	There is support for head.S console in this file.  This
- * console can talk to a Mac frame buffer, but could easily be extrapolated
- * to extend it to support other platforms.
+ * CONSOLE_DEBUG:  Only supports a Mac frame buffer but could easily be
+ * extended to support other platforms.
  *
  * TEST_MMU:	This is a test harness for running on any given machine but
  * getting an MMU dump for another class of machine.  The classes of machines
@@ -274,7 +273,7 @@
 #include <asm/machw.h>
 
 #ifdef CONFIG_FRAMEBUFFER_CONSOLE
-#define CONSOLE
+#define CONSOLE_DEBUG
 #endif
 
 #ifdef CONFIG_EARLY_PRINTK
@@ -480,22 +479,21 @@ func_define	serial_putc,1
 func_define	console_putc,1
 
 func_define	console_init
-func_define	console_put_stats
 func_define	console_put_penguin
 func_define	console_plot_pixel,3
 func_define	console_scroll
 
 .macro	putc	ch
-#if defined(CONSOLE) || defined(SERIAL_DEBUG)
+#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG)
 	pea	\ch
 #endif
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
 	func_call	console_putc
 #endif
 #ifdef SERIAL_DEBUG
 	func_call	serial_putc
 #endif
-#if defined(CONSOLE) || defined(SERIAL_DEBUG)
+#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG)
 	addql	#4,%sp
 #endif
 .endm
@@ -515,7 +513,7 @@ func_define	putn,1
 .endm
 
 .macro	puts		string
-#if defined(CONSOLE) || defined(SERIAL_DEBUG)
+#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG)
 	__INITDATA
 .Lstr\@:
 	.string	"\string"
@@ -651,11 +649,9 @@ ENTRY(__start)
 	lea	%pc@(L(mac_rowbytes)),%a1
 	movel	%a0@,%a1@
 
-#ifdef SERIAL_DEBUG
 	get_bi_record	BI_MAC_SCCBASE
 	lea	%pc@(L(mac_sccbase)),%a1
 	movel	%a0@,%a1@
-#endif
 
 L(test_notmac):
 #endif /* CONFIG_MAC */
@@ -885,13 +881,12 @@ L(nothp):
  */
 #ifdef CONFIG_MAC
 	is_not_mac(L(nocon))
-#  ifdef CONSOLE
+#  ifdef CONSOLE_DEBUG
 	console_init
 #    ifdef CONFIG_LOGO
 	console_put_penguin
 #    endif /* CONFIG_LOGO */
-	console_put_stats
-#  endif /* CONSOLE */
+#  endif /* CONSOLE_DEBUG */
 L(nocon):
 #endif /* CONFIG_MAC */
 
@@ -1396,15 +1391,13 @@ L(mmu_fixup_done):
 	andl	L(mac_videobase),%d0
 	addl	#VIDEOMEMBASE,%d0
 	movel	%d0,L(mac_videobase)
-#if defined(CONSOLE)
+#ifdef CONSOLE_DEBUG
 	movel	%pc@(L(phys_kernel_start)),%d0
 	subl	#PAGE_OFFSET,%d0
 	subl	%d0,L(console_font)
 	subl	%d0,L(console_font_data)
 #endif
-#ifdef SERIAL_DEBUG
 	orl	#0x50000000,L(mac_sccbase)
-#endif
 1:
 #endif
 
@@ -2734,7 +2727,11 @@ func_return	get_new_page
  */
 
 #ifdef CONFIG_MAC
+/* You may define either or both of these. */
+#define MAC_USE_SCC_A /* Modem port */
+#define MAC_USE_SCC_B /* Printer port */
 
+#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
 L(scc_initable_mac):
 	.byte	4,0x44		/* x16, 1 stopbit, no parity */
 	.byte	3,0xc0		/* receiver: 8 bpc */
@@ -2748,6 +2745,7 @@ L(scc_initable_mac):
 	.byte	-1
 	.even
 #endif
+#endif /* CONFIG_MAC */
 
 #ifdef CONFIG_ATARI
 /* #define USE_PRINTER */
@@ -2843,6 +2841,7 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 |	movew	#61,CUSTOMBASE+C_SERPER-ZTWOBASE
 1:
 #endif
+
 #ifdef CONFIG_ATARI
 	is_not_atari(4f)
 	movel	%pc@(L(iobase)),%a1
@@ -2877,21 +2876,14 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	jra	L(serial_init_done)
 4:
 #endif
+
 #ifdef CONFIG_MAC
 	is_not_mac(L(serial_init_not_mac))
-
-#ifdef SERIAL_DEBUG
-
-/* You may define either or both of these. */
-#define MAC_USE_SCC_A /* Modem port */
-#define MAC_USE_SCC_B /* Printer port */
-
+#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
 #define mac_scc_cha_b_ctrl_offset	0x0
 #define mac_scc_cha_a_ctrl_offset	0x2
 #define mac_scc_cha_b_data_offset	0x4
 #define mac_scc_cha_a_data_offset	0x6
-
-#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
 	movel	%pc@(L(mac_sccbase)),%a0
 	/* Reset SCC register pointer */
 	moveb	%a0@(mac_scc_cha_a_ctrl_offset),%d0
@@ -2905,7 +2897,6 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	subq	#1,%d0
 	jne	5b
 #endif
-
 #ifdef MAC_USE_SCC_A
 	/* Initialize channel A */
 	lea	%pc@(L(scc_initable_mac)),%a1
@@ -2916,7 +2907,6 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	jra	5b
 6:
 #endif	/* MAC_USE_SCC_A */
-
 #ifdef MAC_USE_SCC_B
 	/* Initialize channel B */
 	lea	%pc@(L(scc_initable_mac)),%a1
@@ -2927,9 +2917,6 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	jra	7b
 8:
 #endif	/* MAC_USE_SCC_B */
-
-#endif	/* SERIAL_DEBUG */
-
 	jra	L(serial_init_done)
 L(serial_init_not_mac):
 #endif	/* CONFIG_MAC */
@@ -2998,27 +2985,19 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 
 #ifdef CONFIG_MAC
 	is_not_mac(5f)
-
-#ifdef SERIAL_DEBUG
-
 #if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
 	movel	%pc@(L(mac_sccbase)),%a1
 #endif
-
 #ifdef MAC_USE_SCC_A
 3:	btst	#2,%a1@(mac_scc_cha_a_ctrl_offset)
 	jeq	3b
 	moveb	%d0,%a1@(mac_scc_cha_a_data_offset)
 #endif	/* MAC_USE_SCC_A */
-
 #ifdef MAC_USE_SCC_B
 4:	btst	#2,%a1@(mac_scc_cha_b_ctrl_offset)
 	jeq	4b
 	moveb	%d0,%a1@(mac_scc_cha_b_data_offset)
 #endif	/* MAC_USE_SCC_B */
-
-#endif	/* SERIAL_DEBUG */
-
 	jra	L(serial_putc_done)
 5:
 #endif	/* CONFIG_MAC */
@@ -3195,7 +3174,7 @@ func_start	puts,%d0/%a0
 	movel	ARG1,%a0
 	jra	2f
 1:
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
 	console_putc	%d0
 #endif
 #ifdef SERIAL_DEBUG
@@ -3224,7 +3203,7 @@ func_start	putn,%d0-%d2
 	jls	2f
 	addb	#'A'-('9'+1),%d2
 2:
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
 	console_putc	%d2
 #endif
 #ifdef SERIAL_DEBUG
@@ -3256,7 +3235,7 @@ ENTRY(mac_early_print)
 	movel	%sp@(22),%d1		/* fetch parameter */
 	jra	2f
 1:
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
 	console_putc	%d0
 #endif
 #ifdef SERIAL_DEBUG
@@ -3292,7 +3271,7 @@ func_start	set_leds,%d0/%a0
 func_return	set_leds
 #endif
 
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
 /*
  *	For continuity, see the data alignment
  *	to which this structure is tied.
@@ -3396,43 +3375,6 @@ L(console_clear_loop):
 1:
 func_return	console_init
 
-func_start	console_put_stats,%a0/%d7
-	/*
-	 *	Some of the register usage that follows
-	 *		a0 = pointer to boot_info
-	 *		d7 = value of boot_info fields
-	 */
-	puts	"\nMacLinux\n"
-
-#ifdef SERIAL_DEBUG
-	puts	"\n vidaddr:"
-	putn	%pc@(L(mac_videobase))		/* video addr. */
-
-	puts	"\n  _stext:"
-	lea	%pc@(_stext),%a0
-	putn	%a0
-
-	puts	"\nbootinfo:"
-	lea	%pc@(_end),%a0
-	putn	%a0
-
-	puts	"\n   cpuid:"
-	putn	%pc@(L(cputype))
-
-#  ifdef CONFIG_MAC
-	puts	"\n sccbase:"
-	putn	%pc@(L(mac_sccbase))
-#  endif
-#  ifdef MMU_PRINT
-	putc	'\n'
-	jbsr	mmu_print_machine_cpu_types
-#  endif
-#endif /* SERIAL_DEBUG */
-
-	putc	'\n'
-
-func_return	console_put_stats
-
 #ifdef CONFIG_LOGO
 func_start	console_put_penguin,%a0-%a1/%d0-%d7
 	/*
@@ -3774,7 +3716,7 @@ L(white_16):
 
 L(console_plot_pixel_exit):
 func_return	console_plot_pixel
-#endif /* CONSOLE */
+#endif /* CONSOLE_DEBUG */
 
 
 __INITDATA
@@ -3787,7 +3729,7 @@ L(iobase):
 	.long 0
 #endif
 
-#if defined(CONSOLE)
+#ifdef CONSOLE_DEBUG
 L(console_globals):
 	.long	0		/* cursor column */
 	.long	0		/* cursor row */
@@ -3798,7 +3740,7 @@ L(console_font):
 	.long	0		/* pointer to console font (struct font_desc) */
 L(console_font_data):
 	.long	0		/* pointer to console font data */
-#endif /* CONSOLE */
+#endif /* CONSOLE_DEBUG */
 
 #if defined(MMU_PRINT)
 L(mmu_print_data):
@@ -3856,10 +3798,8 @@ L(mac_dimensions):
 	.long	0
 L(mac_rowbytes):
 	.long	0
-#ifdef SERIAL_DEBUG
 L(mac_sccbase):
 	.long	0
-#endif
 #endif /* CONFIG_MAC */
 
 #if defined (CONFIG_APOLLO)
-- 
cgit v1.2.3


From 7913ad1ad83409e7f9ed5758bb4324bf64c95a73 Mon Sep 17 00:00:00 2001
From: Finn Thain
Date: Sat, 12 Apr 2014 23:48:56 +1000
Subject: m68k: Multi-platform EARLY_PRINTK

Make the boot console available to more m68k platforms by leveraging
the head.S debug console.

The boot console is enabled by the "earlyprintk" command line argument
which is how most other architectures do this.

This is a change of behaviour for the Mac but does not negatively impact
the common use-case which is not debugging.

This is also a change of behaviour for other platforms because it means
the serial port stays quiet when CONFIG_EARLY_PRINTK is not enabled. This
is also an improvement for the common use-case.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stephen N Chivers <schivers@csc.com.au>
[Geert: CONSOLE_DEBUG should depend on CONFIG_FONT_SUPPORT]
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 Documentation/kernel-parameters.txt |  2 +-
 arch/m68k/Kconfig.debug             |  9 ++++--
 arch/m68k/kernel/Makefile           |  2 ++
 arch/m68k/kernel/early_printk.c     | 62 +++++++++++++++++++++++++++++++++++++
 arch/m68k/kernel/head.S             | 36 +++++++--------------
 arch/m68k/mac/config.c              | 29 -----------------
 6 files changed, 84 insertions(+), 56 deletions(-)
 create mode 100644 arch/m68k/kernel/early_printk.c

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 30a8ad0dae53..7da289ee0589 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -892,7 +892,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			(mmio) or 32-bit (mmio32).
 			The options are the same as for ttyS, above.
 
-	earlyprintk=	[X86,SH,BLACKFIN,ARM]
+	earlyprintk=	[X86,SH,BLACKFIN,ARM,M68k]
 			earlyprintk=vga
 			earlyprintk=efi
 			earlyprintk=xen
diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug
index 229682721240..64776d7ac199 100644
--- a/arch/m68k/Kconfig.debug
+++ b/arch/m68k/Kconfig.debug
@@ -12,12 +12,17 @@ config BOOTPARAM_STRING
 
 config EARLY_PRINTK
 	bool "Early printk"
-	depends on MVME16x || MAC
+	depends on !(SUN3 || M68360 || M68000 || COLDFIRE)
 	help
           Write kernel log output directly to a serial port.
+          Where implemented, output goes to the framebuffer as well.
+          PROM console functionality on Sun 3x is not affected by this option.
+
+          Pass "earlyprintk" on the kernel command line to get a
+          boot console.
 
           This is useful for kernel debugging when your machine crashes very
-          early before the console code is initialized.
+          early, i.e. before the normal console driver is loaded.
           You should normally say N here, unless you want to debug such a crash.
 
 if !MMU
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 2d5d9be16273..e47778f8588d 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -25,3 +25,5 @@ obj-$(CONFIG_HAS_DMA)	+= dma.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_BOOTINFO_PROC)	+= bootinfo_proc.o
 
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+
diff --git a/arch/m68k/kernel/early_printk.c b/arch/m68k/kernel/early_printk.c
new file mode 100644
index 000000000000..919b83794545
--- /dev/null
+++ b/arch/m68k/kernel/early_printk.c
@@ -0,0 +1,62 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2014 Finn Thain
+ */
+
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/setup.h>
+
+asmlinkage void __init debug_cons_nputs(const char *s, unsigned n);
+
+static void debug_cons_write(struct console *c,
+			     const char *s, unsigned n)
+{
+	debug_cons_nputs(s, n);
+}
+
+static struct console early_console_instance = {
+	.name  = "debug",
+	.write = debug_cons_write,
+	.flags = CON_PRINTBUFFER | CON_BOOT,
+	.index = -1
+};
+
+static int __init setup_early_printk(char *buf)
+{
+	/* MVME16x registers an early console after interrupt setup. */
+	if (MACH_IS_MVME16x)
+		return 0;
+
+	if (early_console || buf)
+		return 0;
+
+	early_console = &early_console_instance;
+	register_console(early_console);
+
+	return 0;
+}
+early_param("earlyprintk", setup_early_printk);
+
+/*
+ * debug_cons_nputs() defined in arch/m68k/kernel/head.S cannot be called
+ * after init sections are discarded (for platforms that use it).
+ */
+#if !(defined(CONFIG_SUN3)   || defined(CONFIG_M68360) || \
+      defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE))
+
+static int __init unregister_early_console(void)
+{
+	if (!early_console)
+		return 0;
+
+	return unregister_console(early_console);
+}
+late_initcall(unregister_early_console);
+
+#endif
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index 81e610bfa237..a3cfada88368 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -221,7 +221,7 @@
  * MMU_PRINT:	There is a routine built into head.S that can display the
  * MMU data structures.  It outputs its result through the serial_putc
  * interface.  So where ever that winds up driving data, that's where the
- * mmu struct will appear.  On the Macintosh that's typically the console.
+ * mmu struct will appear.
  *
  * SERIAL_DEBUG:	There are a series of putc() macro statements
  * scattered through out the code to give progress of status to the
@@ -249,8 +249,8 @@
  * USE_MFP:	Use the ST-MFP port (Modem1) for serial debug.
  *
  * Macintosh constants:
- * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug and early console.
- * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug and early console.
+ * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug.
+ * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug.
  */
 
 #include <linux/linkage.h>
@@ -267,27 +267,17 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/asm-offsets.h>
-
 #ifdef CONFIG_MAC
-
-#include <asm/machw.h>
-
-#ifdef CONFIG_FRAMEBUFFER_CONSOLE
-#define CONSOLE_DEBUG
+#  include <asm/machw.h>
 #endif
 
 #ifdef CONFIG_EARLY_PRINTK
-#define SERIAL_DEBUG
-#else
-#undef SERIAL_DEBUG
+#  define SERIAL_DEBUG
+#  if defined(CONFIG_MAC) && defined(CONFIG_FONT_SUPPORT)
+#    define CONSOLE_DEBUG
+#  endif
 #endif
 
-#else /* !CONFIG_MAC */
-
-#define SERIAL_DEBUG
-
-#endif /* !CONFIG_MAC */
-
 #undef MMU_PRINT
 #undef MMU_NOCACHE_KERNEL
 #undef DEBUG
@@ -3213,21 +3203,19 @@ func_start	putn,%d0-%d2
 
 func_return	putn
 
-#ifdef CONFIG_MAC
+#ifdef CONFIG_EARLY_PRINTK
 /*
- *	mac_early_print
- *
  *	This routine takes its parameters on the stack.  It then
  *	turns around and calls the internal routines.  This routine
  *	is used by the boot console.
  *
  *	The calling parameters are:
- *		void mac_early_print(const char *str, unsigned length);
+ *		void debug_cons_nputs(const char *str, unsigned length)
  *
  *	This routine does NOT understand variable arguments only
  *	simple strings!
  */
-ENTRY(mac_early_print)
+ENTRY(debug_cons_nputs)
 	moveml	%d0/%d1/%a0,%sp@-
 	movew	%sr,%sp@-
 	ori	#0x0700,%sr
@@ -3249,7 +3237,7 @@ ENTRY(mac_early_print)
 	movew	%sp@+,%sr
 	moveml	%sp@+,%d0/%d1/%a0
 	rts
-#endif /* CONFIG_MAC */
+#endif /* CONFIG_EARLY_PRINTK */
 
 #if defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
 func_start	set_leds,%d0/%a0
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 982c3fe73c4a..a471eab1a4dd 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -71,31 +71,6 @@ static void mac_get_model(char *str);
 static void mac_identify(void);
 static void mac_report_hardware(void);
 
-#ifdef CONFIG_EARLY_PRINTK
-asmlinkage void __init mac_early_print(const char *s, unsigned n);
-
-static void __init mac_early_cons_write(struct console *con,
-                                 const char *s, unsigned n)
-{
-	mac_early_print(s, n);
-}
-
-static struct console __initdata mac_early_cons = {
-	.name  = "early",
-	.write = mac_early_cons_write,
-	.flags = CON_PRINTBUFFER | CON_BOOT,
-	.index = -1
-};
-
-int __init mac_unregister_early_cons(void)
-{
-	/* mac_early_print can't be used after init sections are discarded */
-	return unregister_console(&mac_early_cons);
-}
-
-late_initcall(mac_unregister_early_cons);
-#endif
-
 static void __init mac_sched_init(irq_handler_t vector)
 {
 	via_init_clock(vector);
@@ -190,10 +165,6 @@ void __init config_mac(void)
 	mach_beep = mac_mksound;
 #endif
 
-#ifdef CONFIG_EARLY_PRINTK
-	register_console(&mac_early_cons);
-#endif
-
 	/*
 	 * Determine hardware present
 	 */
-- 
cgit v1.2.3


From c46f46d02c90959b82b99badfadc575081666aae Mon Sep 17 00:00:00 2001
From: Finn Thain
Date: Sat, 12 Apr 2014 23:49:30 +1000
Subject: m68k/mvme16x: Adopt common boot console

In a multi-platform kernel binary we only need one early console instance.

The difficulty here is that the common early console is started by
early_param(), whereas the MVME16x instance is started later by
config_mvme16x(). That means some interrupt setup must be done earlier.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stephen N Chivers <schivers@csc.com.au>
[Geert] Tag debug_cons_write() with __ref to kill section mismatch warning
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/kernel/early_printk.c | 21 +++++++++++++--------
 arch/m68k/kernel/head.S         | 11 +++++++++++
 arch/m68k/mvme16x/config.c      | 26 +-------------------------
 3 files changed, 25 insertions(+), 33 deletions(-)

diff --git a/arch/m68k/kernel/early_printk.c b/arch/m68k/kernel/early_printk.c
index 919b83794545..ff9708d71921 100644
--- a/arch/m68k/kernel/early_printk.c
+++ b/arch/m68k/kernel/early_printk.c
@@ -12,12 +12,21 @@
 #include <linux/string.h>
 #include <asm/setup.h>
 
+extern void mvme16x_cons_write(struct console *co,
+			       const char *str, unsigned count);
+
 asmlinkage void __init debug_cons_nputs(const char *s, unsigned n);
 
-static void debug_cons_write(struct console *c,
-			     const char *s, unsigned n)
+static void __ref debug_cons_write(struct console *c,
+				   const char *s, unsigned n)
 {
-	debug_cons_nputs(s, n);
+#if !(defined(CONFIG_SUN3)   || defined(CONFIG_M68360) || \
+      defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE))
+	if (MACH_IS_MVME16x)
+		mvme16x_cons_write(c, s, n);
+	else
+		debug_cons_nputs(s, n);
+#endif
 }
 
 static struct console early_console_instance = {
@@ -29,10 +38,6 @@ static struct console early_console_instance = {
 
 static int __init setup_early_printk(char *buf)
 {
-	/* MVME16x registers an early console after interrupt setup. */
-	if (MACH_IS_MVME16x)
-		return 0;
-
 	if (early_console || buf)
 		return 0;
 
@@ -52,7 +57,7 @@ early_param("earlyprintk", setup_early_printk);
 
 static int __init unregister_early_console(void)
 {
-	if (!early_console)
+	if (!early_console || MACH_IS_MVME16x)
 		return 0;
 
 	return unregister_console(early_console);
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index a3cfada88368..b671f07aeb81 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -2936,6 +2936,15 @@ L(serial_init_not_mac):
 2:
 #endif
 
+#ifdef CONFIG_MVME16x
+	is_not_mvme16x(L(serial_init_not_mvme16x))
+	moveb	#0x10,M167_PCSCCMICR
+	moveb	#0x10,M167_PCSCCTICR
+	moveb	#0x10,M167_PCSCCRICR
+	jra	L(serial_init_done)
+L(serial_init_not_mvme16x):
+#endif
+
 #ifdef CONFIG_APOLLO
 /* We count on the PROM initializing SIO1 */
 #endif
@@ -3768,7 +3777,9 @@ M167_CYIER = 0xfff45011
 M167_CYLICR = 0xfff45026
 M167_CYTEOIR = 0xfff45085
 M167_CYTDR = 0xfff450f8
+M167_PCSCCMICR = 0xfff4201d
 M167_PCSCCTICR = 0xfff4201e
+M167_PCSCCRICR = 0xfff4201f
 M167_PCTPIACKR = 0xfff42025
 #endif
 
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index eab7d342757e..a53803cc66cd 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -213,7 +213,7 @@ static void __init mvme16x_init_IRQ (void)
 #define CySCRH		(0x22)
 #define CyTFTC		(0x80)
 
-static void cons_write(struct console *co, const char *str, unsigned count)
+void mvme16x_cons_write(struct console *co, const char *str, unsigned count)
 {
 	volatile unsigned char *base_addr = (u_char *)CD2401_ADDR;
 	volatile u_char sink;
@@ -268,20 +268,6 @@ static void cons_write(struct console *co, const char *str, unsigned count)
 	base_addr[CyIER] = ier;
 }
 
-static struct console cons_info =
-{
-	.name	= "sercon",
-	.write	= cons_write,
-	.flags	= CON_PRINTBUFFER | CON_BOOT,
-	.index	= -1,
-};
-
-static void __init mvme16x_early_console(void)
-{
-	register_console(&cons_info);
-
-	printk(KERN_INFO "MVME16x: early console registered\n");
-}
 #endif
 
 void __init config_mvme16x(void)
@@ -336,16 +322,6 @@ void __init config_mvme16x(void)
     else
     {
 	mvme16x_config = MVME16x_CONFIG_GOT_LP | MVME16x_CONFIG_GOT_CD2401;
-
-	/* Dont allow any interrupts from the CD2401 until the interrupt */
-	/* handlers are installed					 */
-
-	pcc2chip[PccSCCMICR] = 0x10;
-	pcc2chip[PccSCCTICR] = 0x10;
-	pcc2chip[PccSCCRICR] = 0x10;
-#ifdef CONFIG_EARLY_PRINTK
-	mvme16x_early_console();
-#endif
     }
 }
 
-- 
cgit v1.2.3


From 83adc18110d632eebefb5c2a1dd27b58ae843d64 Mon Sep 17 00:00:00 2001
From: Finn Thain
Date: Mon, 26 May 2014 23:29:19 +1000
Subject: m68k/atari: fix SCC initialization for debug console

Fix SCC initialization for Atari as was previously fixed for Mac. It's
probably not practical to share more code but some attempt is made to
align the Mac and Atari variants.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/kernel/head.S | 31 +++++++++++++++++++++----------
 1 file changed, 21 insertions(+), 10 deletions(-)

diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index b671f07aeb81..15c8f55e4835 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -2722,6 +2722,7 @@ func_return	get_new_page
 #define MAC_USE_SCC_B /* Printer port */
 
 #if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
+/* Initialisation table for SCC with 3.6864 MHz PCLK */
 L(scc_initable_mac):
 	.byte	4,0x44		/* x16, 1 stopbit, no parity */
 	.byte	3,0xc0		/* receiver: 8 bpc */
@@ -2744,14 +2745,12 @@ L(scc_initable_mac):
 #define USE_MFP
 
 #if defined(USE_SCC_A) || defined(USE_SCC_B)
-#define USE_SCC
-/* Initialisation table for SCC */
-L(scc_initable):
-	.byte	9,12		/* Reset */
+/* Initialisation table for SCC with 7.9872 MHz PCLK */
+/* PCLK == 8.0539 gives baud == 9680.1 */
+L(scc_initable_atari):
 	.byte	4,0x44		/* x16, 1 stopbit, no parity */
 	.byte	3,0xc0		/* receiver: 8 bpc */
 	.byte	5,0xe2		/* transmitter: 8 bpc, assert dtr/rts */
-	.byte	9,0		/* no interrupts */
 	.byte	10,0		/* NRZ */
 	.byte	11,0x50		/* use baud rate generator */
 	.byte	12,24,13,0	/* 9600 baud */
@@ -2800,7 +2799,7 @@ LMFP_UDR     = 0xfffa2f
  */
 
 /*
- * Initialize serial port hardware for 9600/8/1
+ * Initialize serial port hardware
  */
 func_start	serial_init,%d0/%d1/%a0/%a1
 	/*
@@ -2810,7 +2809,7 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	 *		d0 = boot info offset
 	 *	CONFIG_ATARI
 	 *		a0 = address of SCC
-	 *		a1 = Liobase address/address of scc_initable
+	 *		a1 = Liobase address/address of scc_initable_atari
 	 *		d0 = init data for serial port
 	 *	CONFIG_MAC
 	 *		a0 = address of SCC
@@ -2846,9 +2845,21 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	moveb	%a1@(LPSG_READ),%d0
 	bset	#5,%d0
 	moveb	%d0,%a1@(LPSG_WRITE)
-#elif defined(USE_SCC)
+#elif defined(USE_SCC_A) || defined(USE_SCC_B)
 	lea	%a1@(LSCC_CTRL),%a0
-	lea	%pc@(L(scc_initable)),%a1
+	/* Reset SCC register pointer */
+	moveb	%a0@,%d0
+	/* Reset SCC device: write register pointer then register value */
+	moveb	#9,%a0@
+	moveb	#0xc0,%a0@
+	/* Wait for 5 PCLK cycles, which is about 63 CPU cycles */
+	/* 5 / 7.9872 MHz = approx. 0.63 us = 63 / 100 MHz */
+	movel	#32,%d0
+2:
+	subq	#1,%d0
+	jne	2b
+	/* Initialize channel */
+	lea	%pc@(L(scc_initable_atari)),%a1
 2:	moveb	%a1@+,%d0
 	jmi	3f
 	moveb	%d0,%a0@
@@ -3017,7 +3028,7 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 	nop
 	bset	#5,%d0
 	moveb	%d0,%a1@(LPSG_WRITE)
-#elif defined(USE_SCC)
+#elif defined(USE_SCC_A) || defined(USE_SCC_B)
 3:	btst	#2,%a1@(LSCC_CTRL)
 	jeq	3b
 	moveb	%d0,%a1@(LSCC_DATA)
-- 
cgit v1.2.3


From 44074e892cc2e5579b8d75c37612fcf8d023554a Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven
Date: Thu, 17 Apr 2014 10:21:01 +0200
Subject: m68k: Update defconfigs for v3.15-rc2

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/configs/amiga_defconfig    | 5 ++++-
 arch/m68k/configs/apollo_defconfig   | 5 ++++-
 arch/m68k/configs/atari_defconfig    | 5 ++++-
 arch/m68k/configs/bvme6000_defconfig | 5 ++++-
 arch/m68k/configs/hp300_defconfig    | 5 ++++-
 arch/m68k/configs/mac_defconfig      | 5 ++++-
 arch/m68k/configs/multi_defconfig    | 5 ++++-
 arch/m68k/configs/mvme147_defconfig  | 5 ++++-
 arch/m68k/configs/mvme16x_defconfig  | 5 ++++-
 arch/m68k/configs/q40_defconfig      | 5 ++++-
 arch/m68k/configs/sun3_defconfig     | 5 ++++-
 arch/m68k/configs/sun3x_defconfig    | 5 ++++-
 12 files changed, 48 insertions(+), 12 deletions(-)

diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 96da4963d14b..d7eac833a94f 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -159,6 +159,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -227,6 +228,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -279,6 +281,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -305,7 +308,6 @@ CONFIG_VETH=m
 CONFIG_A2065=y
 CONFIG_ARIADNE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
 # CONFIG_NET_VENDOR_HP is not set
@@ -315,6 +317,7 @@ CONFIG_ARIADNE=y
 CONFIG_HYDRA=y
 CONFIG_APNE=y
 CONFIG_ZORRO8390=y
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 1b8739f50cbf..650ee75de6cd 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -157,6 +157,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -225,6 +226,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -261,6 +263,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -284,12 +287,12 @@ CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 6ea4e91f0caa..3142e69342fa 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -156,6 +156,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -224,6 +225,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -269,6 +271,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -293,11 +296,11 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 CONFIG_ATARILANCE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index e5a12739ff2d..0daa8a172f30 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -155,6 +155,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -223,6 +224,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -260,6 +262,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -283,12 +286,12 @@ CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_BVME6000_NET=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 8936d7fb0f0f..88af78f7bad9 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -157,6 +157,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -225,6 +226,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -261,6 +263,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -285,12 +288,12 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 CONFIG_HPLANCE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index be5342cca25b..66f915574a85 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -156,6 +156,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -227,6 +228,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -270,6 +272,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -301,7 +304,6 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 CONFIG_MACMACE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_MAC89x0=y
 # CONFIG_NET_VENDOR_INTEL is not set
@@ -309,6 +311,7 @@ CONFIG_MAC89x0=y
 # CONFIG_NET_VENDOR_MICREL is not set
 CONFIG_MACSONIC=y
 CONFIG_MAC8390=y
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index f27194ade167..5eaa49924fa6 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -165,6 +165,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -236,6 +237,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -302,6 +304,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -340,7 +343,6 @@ CONFIG_MVME147_NET=y
 CONFIG_SUN3LANCE=y
 CONFIG_MACMACE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_MAC89x0=y
 # CONFIG_NET_VENDOR_HP is not set
@@ -354,6 +356,7 @@ CONFIG_MAC8390=y
 CONFIG_NE2000=m
 CONFIG_APNE=y
 CONFIG_ZORRO8390=y
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index c3887603c1db..324d0b4d8351 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -154,6 +154,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -222,6 +223,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -259,6 +261,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -283,12 +286,12 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 CONFIG_MVME147_NET=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index f7ff784d05ac..f0cb4338952e 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -155,6 +155,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -223,6 +224,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -260,6 +262,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -283,12 +286,12 @@ CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_MVME16x_NET=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index f0c72ab037be..d6cf0880c463 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -155,6 +155,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -223,6 +224,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -266,6 +268,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -291,7 +294,6 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_AMD is not set
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
 # CONFIG_NET_VENDOR_HP is not set
@@ -299,6 +301,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 CONFIG_NE2000=m
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index 7bca0f464521..f4e88d1c7472 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -152,6 +152,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -220,6 +221,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -257,6 +259,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -281,11 +284,11 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 CONFIG_SUN3LANCE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 CONFIG_SUN3_82586=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_SUN is not set
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 317f3e1fec95..49f4032c1ad6 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -152,6 +152,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -220,6 +221,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -257,6 +259,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -281,12 +284,12 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 CONFIG_SUN3LANCE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set
-- 
cgit v1.2.3


From 486df8bc4627bdfc032d11bedcd056cc5343ee62 Mon Sep 17 00:00:00 2001
From: Andreas Schwab
Date: Thu, 24 Apr 2014 12:24:48 +0200
Subject: m68k: Increase initial mapping to 8 or 16 MiB if possible

If the size of the first memory chunk is at least 8 or 16 MiB increase the
initial mapping to 8 resp. 16 MiB instead of 4 MiB.
This makes it possible to
  1. Map more memory in the first node without running out of space for the
     page tables,
  2. Boot kernels that don't fit in 4 MiB (e.g. multi_defconfig).

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>

  - Add support for 8 MiB,
  - Store initial mapping size in head.S for later reuse,
  - Add comment about large kernels.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/kernel/head.S | 19 +++++++++++++++++--
 arch/m68k/mm/motorola.c | 10 ++++++----
 2 files changed, 23 insertions(+), 6 deletions(-)

diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index 15c8f55e4835..dbb118e1a4e0 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -292,6 +292,7 @@
 
 .globl kernel_pg_dir
 .globl availmem
+.globl m68k_init_mapped_size
 .globl m68k_pgtable_cachemode
 .globl m68k_supervisor_cachemode
 #ifdef CONFIG_MVME16x
@@ -907,10 +908,21 @@ L(nocon):
  *
  *	This block of code does what's necessary to map in the various kinds
  *	of machines for execution of Linux.
- *	First map the first 4 MB of kernel code & data
+ *	First map the first 4, 8, or 16 MB of kernel code & data
  */
 
-	mmu_map	#PAGE_OFFSET,%pc@(L(phys_kernel_start)),#4*1024*1024,\
+	get_bi_record BI_MEMCHUNK
+	movel	%a0@(4),%d0
+	movel	#16*1024*1024,%d1
+	cmpl	%d0,%d1
+	jls	1f
+	lsrl	#1,%d1
+	cmpl	%d0,%d1
+	jls	1f
+	lsrl	#1,%d1
+1:
+	movel	%d1,m68k_init_mapped_size
+	mmu_map	#PAGE_OFFSET,%pc@(L(phys_kernel_start)),%d1,\
 		%pc@(m68k_supervisor_cachemode)
 
 	putc	'C'
@@ -3730,6 +3742,9 @@ func_return	console_plot_pixel
 __INITDATA
 	.align	4
 
+m68k_init_mapped_size:
+	.long	0
+
 #if defined(CONFIG_ATARI) || defined(CONFIG_AMIGA) || \
     defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
 L(custom):
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 7d4024432163..b958916e5eac 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -45,7 +45,7 @@ EXPORT_SYMBOL(mm_cachebits);
 #endif
 
 /* size of memory already mapped in head.S */
-#define INIT_MAPPED_SIZE	(4UL<<20)
+extern __initdata unsigned long m68k_init_mapped_size;
 
 extern unsigned long availmem;
 
@@ -271,10 +271,12 @@ void __init paging_init(void)
 	 */
 	addr = m68k_memory[0].addr;
 	size = m68k_memory[0].size;
-	free_bootmem_node(NODE_DATA(0), availmem, min(INIT_MAPPED_SIZE, size) - (availmem - addr));
+	free_bootmem_node(NODE_DATA(0), availmem,
+			  min(m68k_init_mapped_size, size) - (availmem - addr));
 	map_node(0);
-	if (size > INIT_MAPPED_SIZE)
-		free_bootmem_node(NODE_DATA(0), addr + INIT_MAPPED_SIZE, size - INIT_MAPPED_SIZE);
+	if (size > m68k_init_mapped_size)
+		free_bootmem_node(NODE_DATA(0), addr + m68k_init_mapped_size,
+				  size - m68k_init_mapped_size);
 
 	for (i = 1; i < m68k_num_memory; i++)
 		map_node(i);
-- 
cgit v1.2.3


From f296401b04a6eb2af8da5a5d40e937e91617061b Mon Sep 17 00:00:00 2001
From: Fabian Frederick
Date: Sat, 10 May 2014 12:38:00 +0200
Subject: m68k/amiga: Convert printk(foo to pr_foo()

-no level printk converted to pr_warn/pr_info
-fixed a small identation problem

This is untested

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/amiga/amisound.c |  2 +-
 arch/m68k/amiga/config.c   | 20 ++++++++++----------
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/m68k/amiga/amisound.c b/arch/m68k/amiga/amisound.c
index 2559eefc6aff..90a60d758f8b 100644
--- a/arch/m68k/amiga/amisound.c
+++ b/arch/m68k/amiga/amisound.c
@@ -51,7 +51,7 @@ void __init amiga_init_sound(void)
 
 	snd_data = amiga_chip_alloc_res(sizeof(sine_data), &beep_res);
 	if (!snd_data) {
-		printk (KERN_CRIT "amiga init_sound: failed to allocate chipmem\n");
+		pr_crit("amiga init_sound: failed to allocate chipmem\n");
 		return;
 	}
 	memcpy (snd_data, sine_data, sizeof(sine_data));
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 9625b7132227..01693df7f2f6 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -183,7 +183,7 @@ int __init amiga_parse_bootinfo(const struct bi_record *record)
 			dev->boardaddr = be32_to_cpu(cd->cd_BoardAddr);
 			dev->boardsize = be32_to_cpu(cd->cd_BoardSize);
 		} else
-			printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
+			pr_warn("amiga_parse_bootinfo: too many AutoConfig devices\n");
 #endif /* CONFIG_ZORRO */
 		break;
 
@@ -209,9 +209,9 @@ static void __init amiga_identify(void)
 
 	memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
 
-	printk("Amiga hardware found: ");
+	pr_info("Amiga hardware found: ");
 	if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
-		printk("[%s] ", amiga_models[amiga_model-AMI_500]);
+		pr_cont("[%s] ", amiga_models[amiga_model-AMI_500]);
 		strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
 	}
 
@@ -322,7 +322,7 @@ static void __init amiga_identify(void)
 
 #define AMIGAHW_ANNOUNCE(name, str)		\
 	if (AMIGAHW_PRESENT(name))		\
-		printk(str)
+		pr_cont(str)
 
 	AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
 	AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
@@ -354,8 +354,8 @@ static void __init amiga_identify(void)
 	AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
 	AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
 	if (AMIGAHW_PRESENT(ZORRO))
-		printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
-	printk("\n");
+		pr_cont("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
+	pr_cont("\n");
 
 #undef AMIGAHW_ANNOUNCE
 }
@@ -424,7 +424,7 @@ void __init config_amiga(void)
 			if (m68k_memory[i].addr < 16*1024*1024) {
 				if (i == 0) {
 					/* don't cut off the branch we're sitting on */
-					printk("Warning: kernel runs in Zorro II memory\n");
+					pr_warn("Warning: kernel runs in Zorro II memory\n");
 					continue;
 				}
 				disabled_z2mem += m68k_memory[i].size;
@@ -435,8 +435,8 @@ void __init config_amiga(void)
 			}
 		}
 		if (disabled_z2mem)
-		printk("%dK of Zorro II memory will not be used as system memory\n",
-		disabled_z2mem>>10);
+			pr_info("%dK of Zorro II memory will not be used as system memory\n",
+				disabled_z2mem>>10);
 	}
 
 	/* request all RAM */
@@ -475,7 +475,7 @@ static void __init amiga_sched_init(irq_handler_t timer_routine)
 	jiffy_ticks = DIV_ROUND_CLOSEST(amiga_eclock, HZ);
 
 	if (request_resource(&mb_resources._ciab, &sched_res))
-		printk("Cannot allocate ciab.ta{lo,hi}\n");
+		pr_warn("Cannot allocate ciab.ta{lo,hi}\n");
 	ciab.cra &= 0xC0;   /* turn off timer A, continuous mode, from Eclk */
 	ciab.talo = jiffy_ticks % 256;
 	ciab.tahi = jiffy_ticks / 256;
-- 
cgit v1.2.3


From ce00aa0a72ebc10270aa093a866f3c181623fd58 Mon Sep 17 00:00:00 2001
From: Fabian Frederick
Date: Sat, 10 May 2014 12:40:53 +0200
Subject: m68k/apollo: Convert printk to pr_foo()

no level printk converted to pr_info

This is untested

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/apollo/config.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 9268c0f96376..6e62d66c396e 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -65,8 +65,8 @@ int __init apollo_parse_bootinfo(const struct bi_record *record)
 
 static void __init dn_setup_model(void)
 {
-	printk("Apollo hardware found: ");
-	printk("[%s]\n", apollo_models[apollo_model - APOLLO_DN3000]);
+	pr_info("Apollo hardware found: [%s]\n",
+		apollo_models[apollo_model - APOLLO_DN3000]);
 
 	switch(apollo_model) {
 		case APOLLO_UNKNOWN:
@@ -197,8 +197,10 @@ void dn_sched_init(irq_handler_t timer_routine)
 	*(volatile unsigned char *)(pica+1)&=(~8);
 
 #if 0
-	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
-	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
+	pr_info("*(0x10803) %02x\n",
+		*(volatile unsigned char *)(apollo_timer + 0x3));
+	pr_info("*(0x10803) %02x\n",
+		*(volatile unsigned char *)(apollo_timer + 0x3));
 #endif
 
 	if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
@@ -236,12 +238,10 @@ int dn_dummy_hwclk(int op, struct rtc_time *t) {
 
 }
 
-int dn_dummy_set_clock_mmss(unsigned long nowtime) {
-
-  printk("set_clock_mmss\n");
-
-  return 0;
-
+int dn_dummy_set_clock_mmss(unsigned long nowtime)
+{
+	pr_info("set_clock_mmss\n");
+	return 0;
 }
 
 void dn_dummy_reset(void) {
-- 
cgit v1.2.3


From e8d6dc5ad26eb027c19cfb44825f038734be2cb3 Mon Sep 17 00:00:00 2001
From: Fabian Frederick
Date: Sat, 10 May 2014 12:42:43 +0200
Subject: m68k/hp300: Convert printk to pr_foo()

This patch also fixes some checkpatch warnings

This is untested

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/hp300/config.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index 2e5a787ea11b..a9befe65adc4 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -87,7 +87,7 @@ int __init hp300_parse_bootinfo(const struct bi_record *record)
 		/* serial port address: ignored here */
 		break;
 
-        default:
+	default:
 		unknown = 1;
 	}
 
@@ -262,11 +262,12 @@ void __init config_hp300(void)
 #endif
 	mach_max_dma_address = 0xffffffff;
 
-	if (hp300_model >= HP_330 && hp300_model <= HP_433S && hp300_model != HP_350) {
-		printk(KERN_INFO "Detected HP9000 model %s\n", hp300_models[hp300_model-HP_320]);
+	if (hp300_model >= HP_330 && hp300_model <= HP_433S &&
+	    hp300_model != HP_350) {
+		pr_info("Detected HP9000 model %s\n",
+			hp300_models[hp300_model-HP_320]);
 		strcat(hp300_model_name, hp300_models[hp300_model-HP_320]);
-	}
-	else {
+	} else {
 		panic("Unknown HP9000 Model");
 	}
 #ifdef CONFIG_SERIAL_8250_CONSOLE
-- 
cgit v1.2.3