From d4b7c5db429fbfd3c79120b27ccf66d583606b57 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Aug 2012 14:51:50 +0900 Subject: sh: intc: Fix up multi-evt irq association. In the multi-evt case we were accidentally associating the parent IRQ, fix this up. Signed-off-by: Paul Mundt --- drivers/sh/intc/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c index 32c26d795ed0..8f32a1323a79 100644 --- a/drivers/sh/intc/core.c +++ b/drivers/sh/intc/core.c @@ -355,7 +355,7 @@ int __init register_intc_controller(struct intc_desc *desc) if (unlikely(res)) { if (res == -EEXIST) { res = irq_domain_associate(d->domain, - irq, irq); + irq2, irq2); if (unlikely(res)) { pr_err("domain association " "failure\n"); -- cgit v1.2.3 From db8b624d55e65ad5d8211a9fef66fa7f16bd13a0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:52 +0200 Subject: ASoC: imx-sgtl5000: fix error return code Initialize ret on the second call to imx_audmux_v2_configure_port so that the subsequent test checks that result and not the previous one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Mark Brown --- sound/soc/fsl/imx-sgtl5000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c index fb21b17f17f5..199408ec4261 100644 --- a/sound/soc/fsl/imx-sgtl5000.c +++ b/sound/soc/fsl/imx-sgtl5000.c @@ -94,7 +94,7 @@ static int __devinit imx_sgtl5000_probe(struct platform_device *pdev) dev_err(&pdev->dev, "audmux internal port setup failed\n"); return ret; } - imx_audmux_v2_configure_port(ext_port, + ret = imx_audmux_v2_configure_port(ext_port, IMX_AUDMUX_V2_PTCR_SYN, IMX_AUDMUX_V2_PDCR_RXDSEL(int_port)); if (ret) { -- cgit v1.2.3 From b18e93a493626c1446f9788ebd5844d008bbf71c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:53 +0200 Subject: ASoC: ux500_msp_i2s: better use devm functions and fix error return code Remove unnecessary calls to devm_kfree and replace iounmap by devm_iounmap (and use resource_size for the third argument). These changes make it possible to remove the error-handling code at the end of ux500_msp_i2s_init_msp, and all of the gotos become direct returns. In the case of the second call to devm_kzalloc, the return variable ret was not initialized. Here it is changed to a direct return of -ENOMEM. A simplified version of the semantic match that finds the second problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Mark Brown --- sound/soc/ux500/ux500_msp_i2s.c | 25 +++++-------------------- 1 file changed, 5 insertions(+), 20 deletions(-) diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c index 5c472f335a64..eb85113d472a 100644 --- a/sound/soc/ux500/ux500_msp_i2s.c +++ b/sound/soc/ux500/ux500_msp_i2s.c @@ -663,7 +663,6 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, struct ux500_msp **msp_p, struct msp_i2s_platform_data *platform_data) { - int ret = 0; struct resource *res = NULL; struct i2s_controller *i2s_cont; struct ux500_msp *msp; @@ -685,15 +684,14 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, if (res == NULL) { dev_err(&pdev->dev, "%s: ERROR: Unable to get resource!\n", __func__); - ret = -ENOMEM; - goto err_res; + return -ENOMEM; } - msp->registers = ioremap(res->start, (res->end - res->start + 1)); + msp->registers = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); if (msp->registers == NULL) { dev_err(&pdev->dev, "%s: ERROR: ioremap failed!\n", __func__); - ret = -ENOMEM; - goto err_res; + return -ENOMEM; } msp->msp_state = MSP_STATE_IDLE; @@ -705,7 +703,7 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, dev_err(&pdev->dev, "%s: ERROR: Failed to allocate I2S-controller!\n", __func__); - goto err_i2s_cont; + return -ENOMEM; } i2s_cont->dev.parent = &pdev->dev; i2s_cont->data = (void *)msp; @@ -716,14 +714,6 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, msp->i2s_cont = i2s_cont; return 0; - -err_i2s_cont: - iounmap(msp->registers); - -err_res: - devm_kfree(&pdev->dev, msp); - - return ret; } void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev, @@ -732,11 +722,6 @@ void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev, dev_dbg(msp->dev, "%s: Enter (id = %d).\n", __func__, msp->id); device_unregister(&msp->i2s_cont->dev); - devm_kfree(&pdev->dev, msp->i2s_cont); - - iounmap(msp->registers); - - devm_kfree(&pdev->dev, msp); } MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From bc72d26bdb23c908ad52ec2d321a137d27762f08 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:03:00 +0200 Subject: ASoC: am3517evm: fix error return code It was forgotten to initialize ret to the result of calling snd_soc_dai_set_sysclk, unlike at the other calls in the same function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Acked-by: Jarkko Nikula Signed-off-by: Mark Brown --- sound/soc/omap/am3517evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/omap/am3517evm.c b/sound/soc/omap/am3517evm.c index 009533ab8d18..df65f98211ec 100644 --- a/sound/soc/omap/am3517evm.c +++ b/sound/soc/omap/am3517evm.c @@ -59,7 +59,7 @@ static int am3517evm_hw_params(struct snd_pcm_substream *substream, return ret; } - snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0, + ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0, SND_SOC_CLOCK_IN); if (ret < 0) { printk(KERN_ERR "can't set CPU system clock OMAP_MCBSP_FSR_SRC_FSX\n"); -- cgit v1.2.3 From 1922b0f2758badc0b971d1ebbd300bc6635a6aef Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Mon, 13 Aug 2012 20:36:05 +0530 Subject: mfd: Move tps65217 regulator plat data handling to regulator Regulator platform data handling was mistakenly added to MFD driver. So we will see build errors if we compile MFD drivers without CONFIG_REGULATOR. This patch moves regulator platform data handling from TPS65217 MFD driver to regulator driver. This makes MFD driver independent of REGULATOR framework so build error is fixed if CONFIG_REGULATOR is not set. drivers/built-in.o: In function `tps65217_probe': tps65217.c:(.devinit.text+0x13e37): undefined reference to `of_regulator_match' This patch also fix allocation size of tps65217 platform data. Current implementation allocates a struct tps65217_board for each regulator specified in the device tree. But the structure itself provides array of regulators so one instance of it is sufficient. Signed-off-by: AnilKumar Ch --- drivers/mfd/tps65217.c | 130 +++++++++++---------------------- drivers/regulator/tps65217-regulator.c | 124 +++++++++++++++++++++++++++---- include/linux/mfd/tps65217.h | 12 ++- 3 files changed, 161 insertions(+), 105 deletions(-) diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index 61c097a98f5d..3bc274409b58 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -24,11 +24,18 @@ #include #include #include -#include +#include +#include #include #include +static struct mfd_cell tps65217s[] = { + { + .name = "tps65217-pmic", + }, +}; + /** * tps65217_reg_read: Read a single tps65217 register. * @@ -133,83 +140,48 @@ int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg, } EXPORT_SYMBOL_GPL(tps65217_clear_bits); -#ifdef CONFIG_OF -static struct of_regulator_match reg_matches[] = { - { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 }, - { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 }, - { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 }, - { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 }, - { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 }, - { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 }, - { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 }, -}; - -static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) -{ - struct device_node *node = client->dev.of_node; - struct tps65217_board *pdata; - struct device_node *regs; - int count = ARRAY_SIZE(reg_matches); - int ret, i; - - regs = of_find_node_by_name(node, "regulators"); - if (!regs) - return NULL; - - ret = of_regulator_match(&client->dev, regs, reg_matches, count); - of_node_put(regs); - if ((ret < 0) || (ret > count)) - return NULL; - - count = ret; - pdata = devm_kzalloc(&client->dev, count * sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return NULL; - - for (i = 0; i < count; i++) { - if (!reg_matches[i].init_data || !reg_matches[i].of_node) - continue; - - pdata->tps65217_init_data[i] = reg_matches[i].init_data; - pdata->of_node[i] = reg_matches[i].of_node; - } - - return pdata; -} - -static struct of_device_id tps65217_of_match[] = { - { .compatible = "ti,tps65217", }, - { }, -}; -#else -static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) -{ - return NULL; -} -#endif - static struct regmap_config tps65217_regmap_config = { .reg_bits = 8, .val_bits = 8, }; +static const struct of_device_id tps65217_of_match[] = { + { .compatible = "ti,tps65217", .data = (void *)TPS65217 }, + { /* sentinel */ }, +}; + static int __devinit tps65217_probe(struct i2c_client *client, const struct i2c_device_id *ids) { struct tps65217 *tps; - struct regulator_init_data *reg_data; - struct tps65217_board *pdata = client->dev.platform_data; - int i, ret; unsigned int version; + unsigned int chip_id = ids->driver_data; + const struct of_device_id *match; + int ret; - if (!pdata && client->dev.of_node) - pdata = tps65217_parse_dt(client); + if (client->dev.of_node) { + match = of_match_device(tps65217_of_match, &client->dev); + if (!match) { + dev_err(&client->dev, + "Failed to find matching dt id\n"); + return -EINVAL; + } + chip_id = (unsigned int)match->data; + } + + if (!chip_id) { + dev_err(&client->dev, "id is null.\n"); + return -ENODEV; + } tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); if (!tps) return -ENOMEM; - tps->pdata = pdata; + i2c_set_clientdata(client, tps); + tps->dev = &client->dev; + tps->id = chip_id; + tps->regmap = devm_regmap_init_i2c(client, &tps65217_regmap_config); if (IS_ERR(tps->regmap)) { ret = PTR_ERR(tps->regmap); @@ -218,8 +190,12 @@ static int __devinit tps65217_probe(struct i2c_client *client, return ret; } - i2c_set_clientdata(client, tps); - tps->dev = &client->dev; + ret = mfd_add_devices(tps->dev, -1, tps65217s, + ARRAY_SIZE(tps65217s), NULL, 0); + if (ret < 0) { + dev_err(tps->dev, "mfd_add_devices failed: %d\n", ret); + return ret; + } ret = tps65217_reg_read(tps, TPS65217_REG_CHIPID, &version); if (ret < 0) { @@ -232,41 +208,21 @@ static int __devinit tps65217_probe(struct i2c_client *client, (version & TPS65217_CHIPID_CHIP_MASK) >> 4, version & TPS65217_CHIPID_REV_MASK); - for (i = 0; i < TPS65217_NUM_REGULATOR; i++) { - struct platform_device *pdev; - - pdev = platform_device_alloc("tps65217-pmic", i); - if (!pdev) { - dev_err(tps->dev, "Cannot create regulator %d\n", i); - continue; - } - - pdev->dev.parent = tps->dev; - pdev->dev.of_node = pdata->of_node[i]; - reg_data = pdata->tps65217_init_data[i]; - platform_device_add_data(pdev, reg_data, sizeof(*reg_data)); - tps->regulator_pdev[i] = pdev; - - platform_device_add(pdev); - } - return 0; } static int __devexit tps65217_remove(struct i2c_client *client) { struct tps65217 *tps = i2c_get_clientdata(client); - int i; - for (i = 0; i < TPS65217_NUM_REGULATOR; i++) - platform_device_unregister(tps->regulator_pdev[i]); + mfd_remove_devices(tps->dev); return 0; } static const struct i2c_device_id tps65217_id_table[] = { - {"tps65217", 0xF0}, - {/* end of list */} + {"tps65217", TPS65217}, + { /* sentinel */ } }; MODULE_DEVICE_TABLE(i2c, tps65217_id_table); diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c index 6caa222af77a..ab00cab905b7 100644 --- a/drivers/regulator/tps65217-regulator.c +++ b/drivers/regulator/tps65217-regulator.c @@ -22,6 +22,7 @@ #include #include +#include #include #include #include @@ -281,37 +282,130 @@ static const struct regulator_desc regulators[] = { NULL), }; +#ifdef CONFIG_OF +static struct of_regulator_match reg_matches[] = { + { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 }, + { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 }, + { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 }, + { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 }, + { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 }, + { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 }, + { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 }, +}; + +static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev) +{ + struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); + struct device_node *node = tps->dev->of_node; + struct tps65217_board *pdata; + struct device_node *regs; + int i, count; + + regs = of_find_node_by_name(node, "regulators"); + if (!regs) + return NULL; + + count = of_regulator_match(pdev->dev.parent, regs, + reg_matches, TPS65217_NUM_REGULATOR); + of_node_put(regs); + if ((count < 0) || (count > TPS65217_NUM_REGULATOR)) + return NULL; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + for (i = 0; i < count; i++) { + if (!reg_matches[i].init_data || !reg_matches[i].of_node) + continue; + + pdata->tps65217_init_data[i] = reg_matches[i].init_data; + pdata->of_node[i] = reg_matches[i].of_node; + } + + return pdata; +} +#else +static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev) +{ + return NULL; +} +#endif + static int __devinit tps65217_regulator_probe(struct platform_device *pdev) { + struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); + struct tps65217_board *pdata = dev_get_platdata(tps->dev); + struct regulator_init_data *reg_data; struct regulator_dev *rdev; - struct tps65217 *tps; - struct tps_info *info = &tps65217_pmic_regs[pdev->id]; struct regulator_config config = { }; + int i, ret; - /* Already set by core driver */ - tps = dev_to_tps65217(pdev->dev.parent); - tps->info[pdev->id] = info; + if (tps->dev->of_node) + pdata = tps65217_parse_dt(pdev); - config.dev = &pdev->dev; - config.of_node = pdev->dev.of_node; - config.init_data = pdev->dev.platform_data; - config.driver_data = tps; + if (!pdata) { + dev_err(&pdev->dev, "Platform data not found\n"); + return -EINVAL; + } - rdev = regulator_register(®ulators[pdev->id], &config); - if (IS_ERR(rdev)) - return PTR_ERR(rdev); + if (tps65217_chip_id(tps) != TPS65217) { + dev_err(&pdev->dev, "Invalid tps chip version\n"); + return -ENODEV; + } - platform_set_drvdata(pdev, rdev); + platform_set_drvdata(pdev, tps); + for (i = 0; i < TPS65217_NUM_REGULATOR; i++) { + + reg_data = pdata->tps65217_init_data[i]; + + /* + * Regulator API handles empty constraints but not NULL + * constraints + */ + if (!reg_data) + continue; + + /* Register the regulators */ + tps->info[i] = &tps65217_pmic_regs[i]; + + config.dev = tps->dev; + config.init_data = reg_data; + config.driver_data = tps; + config.regmap = tps->regmap; + if (tps->dev->of_node) + config.of_node = pdata->of_node[i]; + + rdev = regulator_register(®ulators[i], &config); + if (IS_ERR(rdev)) { + dev_err(tps->dev, "failed to register %s regulator\n", + pdev->name); + ret = PTR_ERR(rdev); + goto err_unregister_regulator; + } + + /* Save regulator for cleanup */ + tps->rdev[i] = rdev; + } return 0; + +err_unregister_regulator: + while (--i >= 0) + regulator_unregister(tps->rdev[i]); + + return ret; } static int __devexit tps65217_regulator_remove(struct platform_device *pdev) { - struct regulator_dev *rdev = platform_get_drvdata(pdev); + struct tps65217 *tps = platform_get_drvdata(pdev); + unsigned int i; + + for (i = 0; i < TPS65217_NUM_REGULATOR; i++) + regulator_unregister(tps->rdev[i]); platform_set_drvdata(pdev, NULL); - regulator_unregister(rdev); return 0; } diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h index 12c06870829a..7cd83d826ed8 100644 --- a/include/linux/mfd/tps65217.h +++ b/include/linux/mfd/tps65217.h @@ -22,6 +22,9 @@ #include #include +/* TPS chip id list */ +#define TPS65217 0xF0 + /* I2C ID for TPS65217 part */ #define TPS65217_I2C_ID 0x24 @@ -248,13 +251,11 @@ struct tps_info { struct tps65217 { struct device *dev; struct tps65217_board *pdata; + unsigned int id; struct regulator_desc desc[TPS65217_NUM_REGULATOR]; struct regulator_dev *rdev[TPS65217_NUM_REGULATOR]; struct tps_info *info[TPS65217_NUM_REGULATOR]; struct regmap *regmap; - - /* Client devices */ - struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR]; }; static inline struct tps65217 *dev_to_tps65217(struct device *dev) @@ -262,6 +263,11 @@ static inline struct tps65217 *dev_to_tps65217(struct device *dev) return dev_get_drvdata(dev); } +static inline int tps65217_chip_id(struct tps65217 *tps65217) +{ + return tps65217->id; +} + int tps65217_reg_read(struct tps65217 *tps, unsigned int reg, unsigned int *val); int tps65217_reg_write(struct tps65217 *tps, unsigned int reg, -- cgit v1.2.3 From a0e35322910555e20e9eced3f050a76c7b3a1f92 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Thu, 16 Aug 2012 15:50:10 +0800 Subject: mfd: lpc_ich: Fix a 3.5 kernel regression for iTCO_wdt driver There are many reports (including 2 of my machines) that iTCO_wdt watchdog driver fails to be initialized in 3.5 kernel with error message like: [ 5.265175] ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \_SB_.PCI0.LPCB.TCOI 1 (20120320/utaddress-251) [ 5.265192] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.265206] lpc_ich: Resource conflict(s) found affecting iTCO_wdt The root cause the iTCO_wdt driver in 3.4 probes the HW IO resource from LPC's PCI config space, while in 3.5 kernel it relies on lpc_ich driver for the probe, which adds a new acpi_check_resource_conflict() check, and give up the probe if there is any conflict with ACPI. Fix it by removing all the checks for iTCO_wdt to keep the same behavior as 3.4 kernel. https://bugzilla.kernel.org/show_bug.cgi?id=44991 Actually the same check could be removed for the gpio-ich in lpc_ich.c, but I'm not sure if it will cause problems. Signed-off-by: Feng Tang Cc: Aaron Sierra Cc: Wim Van Sebroeck Cc: Len Brown Cc: Bob Moore Signed-off-by: Samuel Ortiz --- drivers/mfd/lpc_ich.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index 027cc8f86132..a05fdfc2ebcf 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -765,7 +765,6 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, u32 base_addr_cfg; u32 base_addr; int ret; - bool acpi_conflict = false; struct resource *res; /* Setup power management base register */ @@ -780,20 +779,11 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, res = wdt_io_res(ICH_RES_IO_TCO); res->start = base_addr + ACPIBASE_TCO_OFF; res->end = base_addr + ACPIBASE_TCO_END; - ret = acpi_check_resource_conflict(res); - if (ret) { - acpi_conflict = true; - goto wdt_done; - } res = wdt_io_res(ICH_RES_IO_SMI); res->start = base_addr + ACPIBASE_SMI_OFF; res->end = base_addr + ACPIBASE_SMI_END; - ret = acpi_check_resource_conflict(res); - if (ret) { - acpi_conflict = true; - goto wdt_done; - } + lpc_ich_enable_acpi_space(dev); /* @@ -813,11 +803,6 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, res = wdt_mem_res(ICH_RES_MEM_GCS); res->start = base_addr + ACPIBASE_GCS_OFF; res->end = base_addr + ACPIBASE_GCS_END; - ret = acpi_check_resource_conflict(res); - if (ret) { - acpi_conflict = true; - goto wdt_done; - } } lpc_ich_finalize_cell(&lpc_ich_cells[LPC_WDT], id); @@ -825,9 +810,6 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, 1, NULL, 0); wdt_done: - if (acpi_conflict) - pr_warn("Resource conflict(s) found affecting %s\n", - lpc_ich_cells[LPC_WDT].name); return ret; } -- cgit v1.2.3 From 4c054ba63ad47ef244cfcfa1cea38134620a5bae Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 16 Aug 2012 15:33:10 -0700 Subject: target: Fix ->data_length re-assignment bug with SCSI overflow This patch fixes a long-standing bug with SCSI overflow handling where se_cmd->data_length was incorrectly being re-assigned to the larger CDB extracted allocation length, resulting in a number of fabric level errors that would end up causing a session reset in most cases. So instead now: - Only re-assign se_cmd->data_length durining UNDERFLOW (to use the smaller value) - Use existing se_cmd->data_length for OVERFLOW (to use the smaller value) This fix has been tested with the following CDB to generate an SCSI overflow: sg_raw -r512 /dev/sdc 28 0 0 0 0 0 0 0 9 0 Tested using iscsi-target, tcm_qla2xxx, loopback and tcm_vhost fabric ports. Here is a bit more detail on each case: - iscsi-target: Bug with open-iscsi with overflow, sg_raw returns -3584 bytes of data. - tcm_qla2xxx: Working as expected, returnins 512 bytes of data - loopback: sg_raw returns CHECK_CONDITION, from overflow rejection in transport_generic_map_mem_to_cmd() - tcm_vhost: Same as loopback Reported-by: Roland Dreier Cc: Roland Dreier Cc: Christoph Hellwig Cc: Boaz Harrosh Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 4de3186dc44e..3425098ef728 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1181,15 +1181,20 @@ int target_cmd_size_check(struct se_cmd *cmd, unsigned int size) /* Returns CHECK_CONDITION + INVALID_CDB_FIELD */ goto out_invalid_cdb_field; } - + /* + * For the overflow case keep the existing fabric provided + * ->data_length. Otherwise for the underflow case, reset + * ->data_length to the smaller SCSI expected data transfer + * length. + */ if (size > cmd->data_length) { cmd->se_cmd_flags |= SCF_OVERFLOW_BIT; cmd->residual_count = (size - cmd->data_length); } else { cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT; cmd->residual_count = (cmd->data_length - size); + cmd->data_length = size; } - cmd->data_length = size; } return 0; -- cgit v1.2.3 From d8c3bb911f5afc32f7276c2e2e89eb58af4306ae Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 23 Aug 2012 18:10:42 +0100 Subject: ASoC: dapm: Make sure we update the bias level for CODECs with no op Commit 412312 (ASoC: dapm: Make sure all dapm contexts are updated) ensures that we update non-CODEC DAPM contexts but means that if a CODEC has no set_bias_level() operation it'll not be updated. Fix that. Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index dd7c49fafd75..145ec4b56ca9 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -291,6 +291,8 @@ static int snd_soc_dapm_set_bias_level(struct snd_soc_dapm_context *dapm, if (dapm->codec->driver->set_bias_level) ret = dapm->codec->driver->set_bias_level(dapm->codec, level); + else + dapm->bias_level = level; } else dapm->bias_level = level; -- cgit v1.2.3 From 4e872a46823c64e655d997e1e04a4b32e326aa1b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 23 Aug 2012 18:20:49 +0100 Subject: ASoC: dapm: Don't force card bias level to be updated Commit 412312 (ASoC: dapm: Make sure all dapm contexts are updated) means that any DAPM context being updated will have the bias level automatically set, including the card. We can't safely do this as the card callbacks are called for each device context and so the management of the card bias is more complex. Several multi-component cards rely on this behaviour. Skip updates during the asynchronous run entirely. We should really do them in the synchronous section but it's not 100% clear which values to pick as the different DAPM contexts may have different bias levels. Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 145ec4b56ca9..f90139b5f50d 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -293,8 +293,9 @@ static int snd_soc_dapm_set_bias_level(struct snd_soc_dapm_context *dapm, level); else dapm->bias_level = level; - } else + } else if (!card || dapm != &card->dapm) { dapm->bias_level = level; + } if (ret != 0) goto out; -- cgit v1.2.3 From 13b5533a38b1eec9d61a07711dc075f03ae47a36 Mon Sep 17 00:00:00 2001 From: Benjamin Wang Date: Sun, 26 Aug 2012 18:04:10 +0800 Subject: target: Check idr_get_new return value in iscsi_login_zero_tsih_s1 This patch updates iscsi_login_zero_tsih_s1() usage for generating iscsi_session->session_index to properly check the return value from idr_get_new(), and reject the iSCSI login attempt with exception status ISCSI_LOGIN_STATUS_NO_RESOURCES in the event of a failure. Signed-off-by: Benjamin Wang Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_login.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index 0694d9b1bce6..6aba4395e8d8 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -221,6 +221,7 @@ static int iscsi_login_zero_tsih_s1( { struct iscsi_session *sess = NULL; struct iscsi_login_req *pdu = (struct iscsi_login_req *)buf; + int ret; sess = kzalloc(sizeof(struct iscsi_session), GFP_KERNEL); if (!sess) { @@ -257,9 +258,17 @@ static int iscsi_login_zero_tsih_s1( return -ENOMEM; } spin_lock(&sess_idr_lock); - idr_get_new(&sess_idr, NULL, &sess->session_index); + ret = idr_get_new(&sess_idr, NULL, &sess->session_index); spin_unlock(&sess_idr_lock); + if (ret < 0) { + pr_err("idr_get_new() for sess_idr failed\n"); + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_NO_RESOURCES); + kfree(sess); + return -ENOMEM; + } + sess->creation_time = get_jiffies_64(); spin_lock_init(&sess->session_stats_lock); /* -- cgit v1.2.3 From 2bd4082776ff17a0d0d565852afb422931c2f6f2 Mon Sep 17 00:00:00 2001 From: RongQing.Li Date: Mon, 2 Jul 2012 12:34:30 +0800 Subject: MIPS: CMP/SMTC: Fix tc_id calculation Currently the tc_id code is: (read_c0_tcbind() >> TCBIND_CURTC_SHIFT) & TCBIND_CURTC; After processing this becomes: (read_c0_tcbind() >> 21) & ((0xff) << 21) But it should be: (read_c0_tcbind() & ((0xff)<< 21)) >> 21 Signed-off-by: RongQing.Li Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4077/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/smp-cmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c index e7e03ecf5495..afc379ca3753 100644 --- a/arch/mips/kernel/smp-cmp.c +++ b/arch/mips/kernel/smp-cmp.c @@ -102,7 +102,7 @@ static void cmp_init_secondary(void) c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE; #endif #ifdef CONFIG_MIPS_MT_SMTC - c->tc_id = (read_c0_tcbind() >> TCBIND_CURTC_SHIFT) & TCBIND_CURTC; + c->tc_id = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT; #endif } -- cgit v1.2.3 From af89fa3986b9d034a286544ab1ed95096496a2f9 Mon Sep 17 00:00:00 2001 From: Jovi Zhang Date: Wed, 22 Aug 2012 10:34:08 +0800 Subject: MIPS: mm: Add compound tail page _mapcount when mapped See commit b6999b191 which did the same modification for x86's mm/gup, Quote from commit b6999b191: "If compound pages are used and the page is a tail page, gup_huge_pmd() increases _mapcount to record tail page are mapped while gup_huge_pud does not do that." [ralf@linux-mips.org: fixed rejects caused by the original patch getting linewrapped.] Signed-off-by: Jovi Zhang Cc: Youquan Song Cc: Andi Kleen Cc: Patchwork: https://patchwork.linux-mips.org/patch/4291/ Signed-off-by: Ralf Baechle --- arch/mips/mm/gup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/mm/gup.c b/arch/mips/mm/gup.c index 33aadbcf170b..dcfd573871c1 100644 --- a/arch/mips/mm/gup.c +++ b/arch/mips/mm/gup.c @@ -152,6 +152,8 @@ static int gup_huge_pud(pud_t pud, unsigned long addr, unsigned long end, do { VM_BUG_ON(compound_head(page) != head); pages[*nr] = page; + if (PageTail(page)) + get_huge_page_tail(page); (*nr)++; page++; refs++; -- cgit v1.2.3 From b969afc8b719bbe3f0842a694e6bf5e87f08868f Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Thu, 23 Aug 2012 18:14:54 +0200 Subject: ASoC: atmel-ssc: include linux/io.h for raw io Include linux/io.h for raw io operations in atmel-scc header. This fixes the following build error: CC [M] sound/soc/atmel/atmel_ssc_dai.o sound/soc/atmel/atmel_ssc_dai.c: In function 'atmel_ssc_interrupt': sound/soc/atmel/atmel_ssc_dai.c:171: error: implicit declaration of function '__raw_readl' sound/soc/atmel/atmel_ssc_dai.c: In function 'atmel_ssc_shutdown': sound/soc/atmel/atmel_ssc_dai.c:249: error: implicit declaration of function '__raw_writel' Signed-off-by: Joachim Eastwood Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Mark Brown --- include/linux/atmel-ssc.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h index 06023393fba9..4eb31752e2b7 100644 --- a/include/linux/atmel-ssc.h +++ b/include/linux/atmel-ssc.h @@ -3,6 +3,7 @@ #include #include +#include struct ssc_device { struct list_head list; -- cgit v1.2.3 From c921928661eda599d73a6a86e58bdd5aecfa18cb Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 24 Aug 2012 21:20:15 -0600 Subject: sound: tegra_alc5632: remove HP detect GPIO inversion Both the schematics and practical testing show that the HP detect GPIO is high when the headphones are plugged in. Hence, the snd_soc_jack_gpio should not specify to invert the signal. Signed-off-by: Stephen Warren Acked-by: Andrey Danin Signed-off-by: Mark Brown Cc: # v3.4 v3.5 --- sound/soc/tegra/tegra_alc5632.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/tegra/tegra_alc5632.c b/sound/soc/tegra/tegra_alc5632.c index e463529b38bb..76cb1b363b71 100644 --- a/sound/soc/tegra/tegra_alc5632.c +++ b/sound/soc/tegra/tegra_alc5632.c @@ -89,7 +89,6 @@ static struct snd_soc_jack_gpio tegra_alc5632_hp_jack_gpio = { .name = "Headset detection", .report = SND_JACK_HEADSET, .debounce_time = 150, - .invert = 1, }; static const struct snd_soc_dapm_widget tegra_alc5632_dapm_widgets[] = { -- cgit v1.2.3 From 6fb8a90aa3f2319a25f3396b1e9273300f8903b8 Mon Sep 17 00:00:00 2001 From: Carlos Maiolino Date: Fri, 10 Aug 2012 15:01:51 -0300 Subject: xfs: fix race while discarding buffers [V4] While xfs_buftarg_shrink() is freeing buffers from the dispose list (filled with buffers from lru list), there is a possibility to have xfs_buf_stale() racing with it, and removing buffers from dispose list before xfs_buftarg_shrink() does it. This happens because xfs_buftarg_shrink() handle the dispose list without locking and the test condition in xfs_buf_stale() checks for the buffer being in *any* list: if (!list_empty(&bp->b_lru)) If the buffer happens to be on dispose list, this causes the buffer counter of lru list (btp->bt_lru_nr) to be decremented twice (once in xfs_buftarg_shrink() and another in xfs_buf_stale()) causing a wrong account usage of the lru list. This may cause xfs_buftarg_shrink() to return a wrong value to the memory shrinker shrink_slab(), and such account error may also cause an underflowed value to be returned; since the counter is lower than the current number of items in the lru list, a decrement may happen when the counter is 0, causing an underflow on the counter. The fix uses a new flag field (and a new buffer flag) to serialize buffer handling during the shrink process. The new flag field has been designed to use btp->bt_lru_lock/unlock instead of xfs_buf_lock/unlock mechanism. dchinner, sandeen, aquini and aris also deserve credits for this. Signed-off-by: Carlos Maiolino Reviewed-by: Ben Myers Reviewed-by: Dave Chinner Signed-off-by: Ben Myers --- fs/xfs/xfs_buf.c | 5 ++++- fs/xfs/xfs_buf.h | 41 ++++++++++++++++++++++++----------------- 2 files changed, 28 insertions(+), 18 deletions(-) diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index d7a9dd735e1e..933b7930b863 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -96,6 +96,7 @@ xfs_buf_lru_add( atomic_inc(&bp->b_hold); list_add_tail(&bp->b_lru, &btp->bt_lru); btp->bt_lru_nr++; + bp->b_lru_flags &= ~_XBF_LRU_DISPOSE; } spin_unlock(&btp->bt_lru_lock); } @@ -154,7 +155,8 @@ xfs_buf_stale( struct xfs_buftarg *btp = bp->b_target; spin_lock(&btp->bt_lru_lock); - if (!list_empty(&bp->b_lru)) { + if (!list_empty(&bp->b_lru) && + !(bp->b_lru_flags & _XBF_LRU_DISPOSE)) { list_del_init(&bp->b_lru); btp->bt_lru_nr--; atomic_dec(&bp->b_hold); @@ -1501,6 +1503,7 @@ xfs_buftarg_shrink( */ list_move(&bp->b_lru, &dispose); btp->bt_lru_nr--; + bp->b_lru_flags |= _XBF_LRU_DISPOSE; } spin_unlock(&btp->bt_lru_lock); diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h index d03b73b9604e..7c0b6a0a1557 100644 --- a/fs/xfs/xfs_buf.h +++ b/fs/xfs/xfs_buf.h @@ -38,27 +38,28 @@ typedef enum { XBRW_ZERO = 3, /* Zero target memory */ } xfs_buf_rw_t; -#define XBF_READ (1 << 0) /* buffer intended for reading from device */ -#define XBF_WRITE (1 << 1) /* buffer intended for writing to device */ -#define XBF_READ_AHEAD (1 << 2) /* asynchronous read-ahead */ -#define XBF_ASYNC (1 << 4) /* initiator will not wait for completion */ -#define XBF_DONE (1 << 5) /* all pages in the buffer uptodate */ -#define XBF_STALE (1 << 6) /* buffer has been staled, do not find it */ +#define XBF_READ (1 << 0) /* buffer intended for reading from device */ +#define XBF_WRITE (1 << 1) /* buffer intended for writing to device */ +#define XBF_READ_AHEAD (1 << 2) /* asynchronous read-ahead */ +#define XBF_ASYNC (1 << 4) /* initiator will not wait for completion */ +#define XBF_DONE (1 << 5) /* all pages in the buffer uptodate */ +#define XBF_STALE (1 << 6) /* buffer has been staled, do not find it */ /* I/O hints for the BIO layer */ -#define XBF_SYNCIO (1 << 10)/* treat this buffer as synchronous I/O */ -#define XBF_FUA (1 << 11)/* force cache write through mode */ -#define XBF_FLUSH (1 << 12)/* flush the disk cache before a write */ +#define XBF_SYNCIO (1 << 10)/* treat this buffer as synchronous I/O */ +#define XBF_FUA (1 << 11)/* force cache write through mode */ +#define XBF_FLUSH (1 << 12)/* flush the disk cache before a write */ /* flags used only as arguments to access routines */ -#define XBF_TRYLOCK (1 << 16)/* lock requested, but do not wait */ -#define XBF_UNMAPPED (1 << 17)/* do not map the buffer */ +#define XBF_TRYLOCK (1 << 16)/* lock requested, but do not wait */ +#define XBF_UNMAPPED (1 << 17)/* do not map the buffer */ /* flags used only internally */ -#define _XBF_PAGES (1 << 20)/* backed by refcounted pages */ -#define _XBF_KMEM (1 << 21)/* backed by heap memory */ -#define _XBF_DELWRI_Q (1 << 22)/* buffer on a delwri queue */ -#define _XBF_COMPOUND (1 << 23)/* compound buffer */ +#define _XBF_PAGES (1 << 20)/* backed by refcounted pages */ +#define _XBF_KMEM (1 << 21)/* backed by heap memory */ +#define _XBF_DELWRI_Q (1 << 22)/* buffer on a delwri queue */ +#define _XBF_COMPOUND (1 << 23)/* compound buffer */ +#define _XBF_LRU_DISPOSE (1 << 24)/* buffer being discarded */ typedef unsigned int xfs_buf_flags_t; @@ -72,12 +73,13 @@ typedef unsigned int xfs_buf_flags_t; { XBF_SYNCIO, "SYNCIO" }, \ { XBF_FUA, "FUA" }, \ { XBF_FLUSH, "FLUSH" }, \ - { XBF_TRYLOCK, "TRYLOCK" }, /* should never be set */\ + { XBF_TRYLOCK, "TRYLOCK" }, /* should never be set */\ { XBF_UNMAPPED, "UNMAPPED" }, /* ditto */\ { _XBF_PAGES, "PAGES" }, \ { _XBF_KMEM, "KMEM" }, \ { _XBF_DELWRI_Q, "DELWRI_Q" }, \ - { _XBF_COMPOUND, "COMPOUND" } + { _XBF_COMPOUND, "COMPOUND" }, \ + { _XBF_LRU_DISPOSE, "LRU_DISPOSE" } typedef struct xfs_buftarg { dev_t bt_dev; @@ -124,7 +126,12 @@ typedef struct xfs_buf { xfs_buf_flags_t b_flags; /* status flags */ struct semaphore b_sema; /* semaphore for lockables */ + /* + * concurrent access to b_lru and b_lru_flags are protected by + * bt_lru_lock and not by b_sema + */ struct list_head b_lru; /* lru list */ + xfs_buf_flags_t b_lru_flags; /* internal lru status flags */ wait_queue_head_t b_waiters; /* unpin waiters */ struct list_head b_list; struct xfs_perag *b_pag; /* contains rbtree root */ -- cgit v1.2.3 From 37d7b34f05b7bcca364bdf47d8955e766094a244 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Thu, 30 Aug 2012 16:26:25 -0700 Subject: block: rate-limit the error message from failing commands When performing a cable pull test w/ active stress I/O using fio over a dual port Intel 82599 FCoE CNA, w/ 256LUNs on one port and about 32LUNs on the other, it is observed that the system becomes not usable due to scsi-ml being busy printing the error messages for all the failing commands. I don't believe this problem is specific to FCoE and these commands are anyway failing due to link being down (DID_NO_CONNECT), just rate-limit the messages here to solve this issue. v2->v1: use __ratelimit() as Tomas Henzl mentioned as the proper way for rate-limit per function. However, in this case, the failed i/o gets to blk_end_request_err() and then blk_update_request(), which also has to be rate-limited, as added in the v2 of this patch. v3-v2: resolved conflict to apply on current 3.6-rc3 upstream tip. Signed-off-by: Yi Zou Cc: www.Open-FCoE.org Cc: Tomas Henzl Cc: Signed-off-by: Jens Axboe --- block/blk-core.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 4b4dbdfbca89..ee3cb3a5e278 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2254,9 +2254,11 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes) error_type = "I/O"; break; } - printk(KERN_ERR "end_request: %s error, dev %s, sector %llu\n", - error_type, req->rq_disk ? req->rq_disk->disk_name : "?", - (unsigned long long)blk_rq_pos(req)); + printk_ratelimited(KERN_ERR "end_request: %s error, dev %s, sector %llu\n", + error_type, req->rq_disk ? + req->rq_disk->disk_name : "?", + (unsigned long long)blk_rq_pos(req)); + } blk_account_io_completion(req, nr_bytes); -- cgit v1.2.3 From fd4fb262b31ecb06bf93defb036e72b33ddf0200 Mon Sep 17 00:00:00 2001 From: Prasad Joshi Date: Fri, 31 Aug 2012 08:55:21 +0530 Subject: ASoC: spear: correct the check for NULL dma_buffer pointer The if condition if (!buf && !buf->area) checks if the buf pointer is NULL and then dereferences it again to check if the buffer area is NULL, resulting in possible NULL dereference. Signed-off-by: Prasad Joshi Signed-off-by: Mark Brown --- sound/soc/spear/spear_pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/spear/spear_pcm.c b/sound/soc/spear/spear_pcm.c index 97c2cac8e92c..8c7f23729446 100644 --- a/sound/soc/spear/spear_pcm.c +++ b/sound/soc/spear/spear_pcm.c @@ -138,7 +138,7 @@ static void spear_pcm_free(struct snd_pcm *pcm) continue; buf = &substream->dma_buffer; - if (!buf && !buf->area) + if (!buf || !buf->area) continue; dma_free_writecombine(pcm->card->dev, buf->bytes, -- cgit v1.2.3 From d5feaea364281a7e9b80b4712e790ab908d61711 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Thu, 30 Aug 2012 18:52:54 +0200 Subject: s390/mm: fix deadlock in unmap_hugepage_range() git commit cd2934a3 moved the flush_tlb_range() within __unmap_hugepage_range() inside the mm->page_table_lock, which triggered a deadlock in s390 tlb flushing code. __tlb_flush_mm_cond() also tries to acquire the mm->page_table_lock, but that is not needed because all callers already have mm->mmap_sem or mm->page_table_lock, so it can be safely removed to fix the deadlock. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/tlbflush.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h index 9fde315f3a7c..1d8fe2b17ef6 100644 --- a/arch/s390/include/asm/tlbflush.h +++ b/arch/s390/include/asm/tlbflush.h @@ -90,12 +90,10 @@ static inline void __tlb_flush_mm(struct mm_struct * mm) static inline void __tlb_flush_mm_cond(struct mm_struct * mm) { - spin_lock(&mm->page_table_lock); if (mm->context.flush_mm) { __tlb_flush_mm(mm); mm->context.flush_mm = 0; } - spin_unlock(&mm->page_table_lock); } /* -- cgit v1.2.3 From 037a833ed05a86d01ea27a2c32043b86c549be1b Mon Sep 17 00:00:00 2001 From: Forest Bond Date: Tue, 4 Sep 2012 20:27:37 -0700 Subject: Input: usbtouchscreen - initialize eGalax devices Certain eGalax devices expose an interface with class HID and protocol None. Some work with usbhid and some work with usbtouchscreen, but there is no easy way to differentiate. Sending an eGalax diagnostic packet seems to kick them all into using the right protocol for usbtouchscreen, so we can continue to bind them all there (as opposed to handing some off to usbhid). This fixes a regression for devices that were claimed by (and worked with) usbhid prior to commit 139ebe8dc80dd74cb2ac9f5603d18fbf5cff049f ("Input: usbtouchscreen - fix eGalax HID ignoring"), which made usbtouchscreen claim them instead. With this patch they will still be claimed by usbtouchscreen, but they will actually report events usbtouchscreen can understand. Note that these devices will be limited to the usbtouchscreen feature set so e.g. dual touch features are not supported. I have the distinct pleasure of needing to support devices of both types and have tested accordingly. Signed-off-by: Forest Bond Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/usbtouchscreen.c | 40 ++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index e32709e0dd65..721fdb3597ca 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -304,6 +304,45 @@ static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #define EGALAX_PKT_TYPE_REPT 0x80 #define EGALAX_PKT_TYPE_DIAG 0x0A +static int egalax_init(struct usbtouch_usb *usbtouch) +{ + int ret, i; + unsigned char *buf; + struct usb_device *udev = interface_to_usbdev(usbtouch->interface); + + /* + * An eGalax diagnostic packet kicks the device into using the right + * protocol. We send a "check active" packet. The response will be + * read later and ignored. + */ + + buf = kmalloc(3, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = EGALAX_PKT_TYPE_DIAG; + buf[1] = 1; /* length */ + buf[2] = 'A'; /* command - check active */ + + for (i = 0; i < 3; i++) { + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, buf, 3, + USB_CTRL_SET_TIMEOUT); + if (ret >= 0) { + ret = 0; + break; + } + if (ret != -EPIPE) + break; + } + + kfree(buf); + + return ret; +} + static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT) @@ -1056,6 +1095,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .process_pkt = usbtouch_process_multi, .get_pkt_len = egalax_get_pkt_len, .read_data = egalax_read_data, + .init = egalax_init, }, #endif -- cgit v1.2.3 From 609455f481772c5a875b88e860a2ee0e2f25ebf0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 4 Sep 2012 20:27:38 -0700 Subject: Input: imx_keypad - fix missing clk conversions commit a1e636e6d3 (Input: imx_keypad - use clk_prepare_enable/ clk_disable_unprepare()) missed to update clk_enable/clk_disable in imx_keypad_probe(). Fix it so that we do not get clk warnings at boot. Signed-off-by: Fabio Estevam Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/imx_keypad.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index ce68e361558c..cdc252612c0b 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -516,9 +516,9 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev) input_set_drvdata(input_dev, keypad); /* Ensure that the keypad will stay dormant until opened */ - clk_enable(keypad->clk); + clk_prepare_enable(keypad->clk); imx_keypad_inhibit(keypad); - clk_disable(keypad->clk); + clk_disable_unprepare(keypad->clk); error = request_irq(irq, imx_keypad_irq_handler, 0, pdev->name, keypad); -- cgit v1.2.3 From 4454d32749465ffa77d82bc1fdd196d6dedc544b Mon Sep 17 00:00:00 2001 From: Joe Millenbach Date: Sun, 2 Sep 2012 17:38:20 -0700 Subject: x86/kconfig: Remove outdated reference to Intel CPUs in CONFIG_SWIOTLB Deleted the no longer valid example of which x86 CPUs lack a hardware IOMMU, and moved the "If unsure..." statement to a new line to follow the style of surrounding options. Signed-off-by: Joe Millenbach Reviewed-by: Josh Triplett Cc: team-fjord@googlegroups.com Cc: Konrad Rzeszutek Wilk Link: http://lkml.kernel.org/r/1346632700-29113-1-git-send-email-jmillenbach@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 8ec3a1aa4abd..50a1d1f9b6d3 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -746,10 +746,10 @@ config SWIOTLB def_bool y if X86_64 ---help--- Support for software bounce buffers used on x86-64 systems - which don't have a hardware IOMMU (e.g. the current generation - of Intel's x86-64 CPUs). Using this PCI devices which can only - access 32-bits of memory can be used on systems with more than - 3 GB of memory. If unsure, say Y. + which don't have a hardware IOMMU. Using this PCI devices + which can only access 32-bits of memory can be used on systems + with more than 3 GB of memory. + If unsure, say Y. config IOMMU_HELPER def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU) -- cgit v1.2.3 From 4758be37c01c658dec5c0ad08d456fa031493de4 Mon Sep 17 00:00:00 2001 From: Heather Lomond Date: Wed, 5 Sep 2012 05:02:10 -0400 Subject: ASoC: arizona: Fix typo in 44.1kHz rates Signed-off-by: Heather Lomond Signed-off-by: Mark Brown --- sound/soc/codecs/arizona.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c index 5c9cacaf2d52..1cf7a32d1b21 100644 --- a/sound/soc/codecs/arizona.c +++ b/sound/soc/codecs/arizona.c @@ -426,7 +426,7 @@ static const int arizona_44k1_bclk_rates[] = { 940800, 1411200, 1881600, - 2882400, + 2822400, 3763200, 5644800, 7526400, -- cgit v1.2.3 From 37f45cc54cb03cac4a6b865b32bc705bb0cb1d29 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 3 Sep 2012 13:04:13 -0300 Subject: ASoC: mc13783: Remove mono support Playing a mono track on a mc13783 codec results in incorrect playback rate. Remove mono support so that a mono track can be played correctly. Signed-off-by: Fabio Estevam Tested-by: Gaëtan Carlier Signed-off-by: Mark Brown --- sound/soc/codecs/mc13783.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/mc13783.c b/sound/soc/codecs/mc13783.c index 8f726c063f42..115a40301810 100644 --- a/sound/soc/codecs/mc13783.c +++ b/sound/soc/codecs/mc13783.c @@ -659,7 +659,7 @@ static struct snd_soc_dai_driver mc13783_dai_async[] = { .id = MC13783_ID_STEREO_DAC, .playback = { .stream_name = "Playback", - .channels_min = 1, + .channels_min = 2, .channels_max = 2, .rates = SNDRV_PCM_RATE_8000_96000, .formats = MC13783_FORMATS, @@ -670,7 +670,7 @@ static struct snd_soc_dai_driver mc13783_dai_async[] = { .id = MC13783_ID_STEREO_CODEC, .capture = { .stream_name = "Capture", - .channels_min = 1, + .channels_min = 2, .channels_max = 2, .rates = MC13783_RATES_RECORD, .formats = MC13783_FORMATS, @@ -692,14 +692,14 @@ static struct snd_soc_dai_driver mc13783_dai_sync[] = { .id = MC13783_ID_SYNC, .playback = { .stream_name = "Playback", - .channels_min = 1, + .channels_min = 2, .channels_max = 2, .rates = SNDRV_PCM_RATE_8000_96000, .formats = MC13783_FORMATS, }, .capture = { .stream_name = "Capture", - .channels_min = 1, + .channels_min = 2, .channels_max = 2, .rates = MC13783_RATES_RECORD, .formats = MC13783_FORMATS, -- cgit v1.2.3 From 6138ed2ab8791d7a9c5ba66cadadd5eaf1fc1dac Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 5 Sep 2012 17:09:13 +0200 Subject: target: move transport_get_sense_data We will be calling it from transport_complete_cmd, avoid forward declarations. No semantic change. Signed-off-by: Paolo Bonzini Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 110 ++++++++++++++++----------------- 1 file changed, 55 insertions(+), 55 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 3425098ef728..d0afdaa06255 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -567,6 +567,61 @@ static void target_complete_failure_work(struct work_struct *work) transport_generic_request_failure(cmd); } +/* + * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd + */ +static int transport_get_sense_data(struct se_cmd *cmd) +{ + unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL; + struct se_device *dev = cmd->se_dev; + unsigned long flags; + u32 offset = 0; + + WARN_ON(!cmd->se_lun); + + if (!dev) + return 0; + + spin_lock_irqsave(&cmd->t_state_lock, flags); + if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { + spin_unlock_irqrestore(&cmd->t_state_lock, flags); + return 0; + } + + if (!(cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE)) + goto out; + + if (!dev->transport->get_sense_buffer) { + pr_err("dev->transport->get_sense_buffer is NULL\n"); + goto out; + } + + sense_buffer = dev->transport->get_sense_buffer(cmd); + if (!sense_buffer) { + pr_err("ITT 0x%08x cmd %p: Unable to locate" + " sense buffer for task with sense\n", + cmd->se_tfo->get_task_tag(cmd), cmd); + goto out; + } + + spin_unlock_irqrestore(&cmd->t_state_lock, flags); + + offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER); + + memcpy(&buffer[offset], sense_buffer, TRANSPORT_SENSE_BUFFER); + + /* Automatically padded */ + cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset; + + pr_debug("HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x and sense\n", + dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status); + return 0; + +out: + spin_unlock_irqrestore(&cmd->t_state_lock, flags); + return -1; +} + void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status) { struct se_device *dev = cmd->se_dev; @@ -1820,61 +1875,6 @@ execute: } EXPORT_SYMBOL(target_execute_cmd); -/* - * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd - */ -static int transport_get_sense_data(struct se_cmd *cmd) -{ - unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL; - struct se_device *dev = cmd->se_dev; - unsigned long flags; - u32 offset = 0; - - WARN_ON(!cmd->se_lun); - - if (!dev) - return 0; - - spin_lock_irqsave(&cmd->t_state_lock, flags); - if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return 0; - } - - if (!(cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE)) - goto out; - - if (!dev->transport->get_sense_buffer) { - pr_err("dev->transport->get_sense_buffer is NULL\n"); - goto out; - } - - sense_buffer = dev->transport->get_sense_buffer(cmd); - if (!sense_buffer) { - pr_err("ITT 0x%08x cmd %p: Unable to locate" - " sense buffer for task with sense\n", - cmd->se_tfo->get_task_tag(cmd), cmd); - goto out; - } - - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - - offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER); - - memcpy(&buffer[offset], sense_buffer, TRANSPORT_SENSE_BUFFER); - - /* Automatically padded */ - cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset; - - pr_debug("HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x and sense\n", - dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status); - return 0; - -out: - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return -1; -} - /* * Process all commands up to the last received ORDERED task attribute which * requires another blocking boundary -- cgit v1.2.3 From 27a2709912ac19c755d34c79fe11994b0bf8082b Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 5 Sep 2012 17:09:14 +0200 Subject: target: simplify code around transport_get_sense_data The error conditions in transport_get_sense_data are superfluous and complicate the code unnecessarily: * SCF_TRANSPORT_TASK_SENSE is checked in the caller; * it's simply part of the invariants of dev->transport->get_sense_buffer that it must be there if transport_complete ever returns 1, and that it must not return NULL. Besides, the entire callback will disappear with the next patch. * similarly in the caller we can expect that sense data is only sent for non-zero cmd->scsi_status. Signed-off-by: Paolo Bonzini Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 49 +++++++++------------------------- 1 file changed, 13 insertions(+), 36 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index d0afdaa06255..040f05fde4d6 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -570,7 +570,7 @@ static void target_complete_failure_work(struct work_struct *work) /* * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd */ -static int transport_get_sense_data(struct se_cmd *cmd) +static void transport_get_sense_data(struct se_cmd *cmd) { unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL; struct se_device *dev = cmd->se_dev; @@ -580,30 +580,15 @@ static int transport_get_sense_data(struct se_cmd *cmd) WARN_ON(!cmd->se_lun); if (!dev) - return 0; + return; spin_lock_irqsave(&cmd->t_state_lock, flags); if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return 0; - } - - if (!(cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE)) - goto out; - - if (!dev->transport->get_sense_buffer) { - pr_err("dev->transport->get_sense_buffer is NULL\n"); - goto out; + return; } sense_buffer = dev->transport->get_sense_buffer(cmd); - if (!sense_buffer) { - pr_err("ITT 0x%08x cmd %p: Unable to locate" - " sense buffer for task with sense\n", - cmd->se_tfo->get_task_tag(cmd), cmd); - goto out; - } - spin_unlock_irqrestore(&cmd->t_state_lock, flags); offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER); @@ -615,11 +600,6 @@ static int transport_get_sense_data(struct se_cmd *cmd) pr_debug("HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x and sense\n", dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status); - return 0; - -out: - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return -1; } void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status) @@ -1990,7 +1970,7 @@ static void transport_handle_queue_full( static void target_complete_ok_work(struct work_struct *work) { struct se_cmd *cmd = container_of(work, struct se_cmd, work); - int reason = 0, ret; + int ret; /* * Check if we need to move delayed/dormant tasks from cmds on the @@ -2011,19 +1991,16 @@ static void target_complete_ok_work(struct work_struct *work) * the struct se_cmd in question. */ if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) { - if (transport_get_sense_data(cmd) < 0) - reason = TCM_NON_EXISTENT_LUN; - - if (cmd->scsi_status) { - ret = transport_send_check_condition_and_sense( - cmd, reason, 1); - if (ret == -EAGAIN || ret == -ENOMEM) - goto queue_full; + WARN_ON(!cmd->scsi_status); + transport_get_sense_data(cmd); + ret = transport_send_check_condition_and_sense( + cmd, 0, 1); + if (ret == -EAGAIN || ret == -ENOMEM) + goto queue_full; - transport_lun_remove_cmd(cmd); - transport_cmd_check_stop_to_fabric(cmd); - return; - } + transport_lun_remove_cmd(cmd); + transport_cmd_check_stop_to_fabric(cmd); + return; } /* * Check for a callback, used by amongst other things -- cgit v1.2.3 From d5829eac5f7cfff89c6d1cf11717eee97cf030d0 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 5 Sep 2012 17:09:15 +0200 Subject: target: fix use-after-free with PSCSI sense data The pointer to the sense buffer is fetched by transport_get_sense_data, but this is called by target_complete_ok_work long after pscsi_req_done has freed the struct that contains it. Pass instead the fabric's sense buffer to transport_complete, and copy the data to it directly in transport_complete. Setting SCF_TRANSPORT_TASK_SENSE also becomes a duty of transport_complete. Signed-off-by: Paolo Bonzini Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pscsi.c | 21 +++++++------------- drivers/target/target_core_transport.c | 36 +++++++++++++--------------------- include/target/target_core_backend.h | 4 +++- 3 files changed, 24 insertions(+), 37 deletions(-) diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 5552fa7426bc..5f7151d90344 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -667,7 +667,8 @@ static void pscsi_free_device(void *p) kfree(pdv); } -static int pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg) +static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg, + unsigned char *sense_buffer) { struct pscsi_dev_virt *pdv = cmd->se_dev->dev_ptr; struct scsi_device *sd = pdv->pdv_sd; @@ -679,7 +680,7 @@ static int pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg) * not been allocated because TCM is handling the emulation directly. */ if (!pt) - return 0; + return; cdb = &pt->pscsi_cdb[0]; result = pt->pscsi_result; @@ -750,10 +751,10 @@ after_mode_sense: } after_mode_select: - if (status_byte(result) & CHECK_CONDITION) - return 1; - - return 0; + if (sense_buffer && (status_byte(result) & CHECK_CONDITION)) { + memcpy(sense_buffer, pt->pscsi_sense, TRANSPORT_SENSE_BUFFER); + cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE; + } } enum { @@ -1184,13 +1185,6 @@ fail: return -ENOMEM; } -static unsigned char *pscsi_get_sense_buffer(struct se_cmd *cmd) -{ - struct pscsi_plugin_task *pt = cmd->priv; - - return pt->pscsi_sense; -} - /* pscsi_get_device_rev(): * * @@ -1273,7 +1267,6 @@ static struct se_subsystem_api pscsi_template = { .check_configfs_dev_params = pscsi_check_configfs_dev_params, .set_configfs_dev_params = pscsi_set_configfs_dev_params, .show_configfs_dev_params = pscsi_show_configfs_dev_params, - .get_sense_buffer = pscsi_get_sense_buffer, .get_device_rev = pscsi_get_device_rev, .get_device_type = pscsi_get_device_type, .get_blocks = pscsi_get_blocks, diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 040f05fde4d6..8a29e3fd0195 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -568,38 +568,31 @@ static void target_complete_failure_work(struct work_struct *work) } /* - * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd + * Used when asking transport to copy Sense Data from the underlying + * Linux/SCSI struct scsi_cmnd */ -static void transport_get_sense_data(struct se_cmd *cmd) +static unsigned char *transport_get_sense_buffer(struct se_cmd *cmd) { - unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL; + unsigned char *buffer = cmd->sense_buffer; struct se_device *dev = cmd->se_dev; - unsigned long flags; u32 offset = 0; WARN_ON(!cmd->se_lun); if (!dev) - return; - - spin_lock_irqsave(&cmd->t_state_lock, flags); - if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return; - } + return NULL; - sense_buffer = dev->transport->get_sense_buffer(cmd); - spin_unlock_irqrestore(&cmd->t_state_lock, flags); + if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) + return NULL; offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER); - memcpy(&buffer[offset], sense_buffer, TRANSPORT_SENSE_BUFFER); - /* Automatically padded */ cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset; - pr_debug("HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x and sense\n", + pr_debug("HBA_[%u]_PLUG[%s]: Requesting sense for SAM STATUS: 0x%02x\n", dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status); + return &buffer[offset]; } void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status) @@ -615,11 +608,11 @@ void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status) cmd->transport_state &= ~CMD_T_BUSY; if (dev && dev->transport->transport_complete) { - if (dev->transport->transport_complete(cmd, - cmd->t_data_sg) != 0) { - cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE; + dev->transport->transport_complete(cmd, + cmd->t_data_sg, + transport_get_sense_buffer(cmd)); + if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) success = 1; - } } /* @@ -1987,12 +1980,11 @@ static void target_complete_ok_work(struct work_struct *work) schedule_work(&cmd->se_dev->qf_work_queue); /* - * Check if we need to retrieve a sense buffer from + * Check if we need to send a sense buffer from * the struct se_cmd in question. */ if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) { WARN_ON(!cmd->scsi_status); - transport_get_sense_data(cmd); ret = transport_send_check_condition_and_sense( cmd, 0, 1); if (ret == -EAGAIN || ret == -ENOMEM) diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h index f1405d335a96..941c84bf1065 100644 --- a/include/target/target_core_backend.h +++ b/include/target/target_core_backend.h @@ -23,7 +23,9 @@ struct se_subsystem_api { struct se_device *(*create_virtdevice)(struct se_hba *, struct se_subsystem_dev *, void *); void (*free_device)(void *); - int (*transport_complete)(struct se_cmd *cmd, struct scatterlist *); + void (*transport_complete)(struct se_cmd *cmd, + struct scatterlist *, + unsigned char *); int (*parse_cdb)(struct se_cmd *cmd); ssize_t (*check_configfs_dev_params)(struct se_hba *, -- cgit v1.2.3 From 9016083b7bc4829c4f97f37a1a3102e0f5a37692 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Wed, 5 Sep 2012 14:07:59 +0200 Subject: s390/hugetlb: use direct TLB flushing for hugetlbfs pages huge_ptep_get_and_clear() is either missing a TLB invalidation or an mm->context.attach_count check. Since the attach_count logic was introduced with normal ptes in mind, let's just use direct TLB flushing for hugetlbfs pages. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/hugetlb.h | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h index 799ed0f1643d..2d6e6e380564 100644 --- a/arch/s390/include/asm/hugetlb.h +++ b/arch/s390/include/asm/hugetlb.h @@ -66,16 +66,6 @@ static inline pte_t huge_ptep_get(pte_t *ptep) return pte; } -static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - pte_t pte = huge_ptep_get(ptep); - - mm->context.flush_mm = 1; - pmd_clear((pmd_t *) ptep); - return pte; -} - static inline void __pmd_csp(pmd_t *pmdp) { register unsigned long reg2 asm("2") = pmd_val(*pmdp); @@ -117,6 +107,15 @@ static inline void huge_ptep_invalidate(struct mm_struct *mm, __pmd_csp(pmdp); } +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + pte_t pte = huge_ptep_get(ptep); + + huge_ptep_invalidate(mm, addr, ptep); + return pte; +} + #define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \ ({ \ int __changed = !pte_same(huge_ptep_get(__ptep), __entry); \ @@ -131,10 +130,7 @@ static inline void huge_ptep_invalidate(struct mm_struct *mm, ({ \ pte_t __pte = huge_ptep_get(__ptep); \ if (pte_write(__pte)) { \ - (__mm)->context.flush_mm = 1; \ - if (atomic_read(&(__mm)->context.attach_count) > 1 || \ - (__mm) != current->active_mm) \ - huge_ptep_invalidate(__mm, __addr, __ptep); \ + huge_ptep_invalidate(__mm, __addr, __ptep); \ set_huge_pte_at(__mm, __addr, __ptep, \ huge_pte_wrprotect(__pte)); \ } \ -- cgit v1.2.3 From 1f08be80bef6f7a3faaa728db836b47ff742f41f Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 5 Sep 2012 14:18:22 +0200 Subject: s390/dasd: move wake_up call Ensure that all work is done when the process waiting for a dasd state change is woken up. With this change it is save to assume that after a userspace triggered state change and a udev settle invocation there are no unexpected users of a dasd device. Acked-by: Stefan Weinhuber Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 15370a2c5ff0..6498d15f874f 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -534,11 +534,11 @@ static void dasd_change_state(struct dasd_device *device) if (rc) device->target = device->state; - if (device->state == device->target) - wake_up(&dasd_init_waitq); - /* let user-space know that the device status changed */ kobject_uevent(&device->cdev->dev.kobj, KOBJ_CHANGE); + + if (device->state == device->target) + wake_up(&dasd_init_waitq); } /* -- cgit v1.2.3 From 43d0be75af8d05654b88d1da494cf292714fbdec Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 5 Sep 2012 14:19:42 +0200 Subject: s390/cio: fix IO subchannel event race If the subchannel event function is called from IRQ context and we observe that the subchannel in question is gone we flag the attached device as not operational and schedule the event function to be called again from process context where the subchannel gets deregistered. However if the subchannel reappeared at the time the event function gets called from process context we would do nothing and leave the device in not operational state. Recognize this case in sch_get_action and trigger reexamination of the subchannel/device. Acked-by: Peter Oberparleiter Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index ed25c8740a9c..e8e1a108cdf8 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1426,6 +1426,8 @@ static enum io_sch_action sch_get_action(struct subchannel *sch) return IO_SCH_REPROBE; if (cdev->online) return IO_SCH_VERIFY; + if (cdev->private->state == DEV_STATE_NOT_OPER) + return IO_SCH_UNREG_ATTACH; return IO_SCH_NOP; } -- cgit v1.2.3 From 3368ba25bf387109b24732c1e270c628f20e345d Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 5 Sep 2012 14:20:41 +0200 Subject: s390/cio: invalidate cdev pointer before deregistration Make sure that the cdev pointer for IO subchannels is set to NULL when we deregister the device (and release its last reference). This will fix a bug were another process operates on an already freed ccw device. Acked-by: Peter Oberparleiter Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index e8e1a108cdf8..fc916f5d7314 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1521,11 +1521,14 @@ static int io_subchannel_sch_event(struct subchannel *sch, int process) goto out; break; case IO_SCH_UNREG_ATTACH: + spin_lock_irqsave(sch->lock, flags); if (cdev->private->flags.resuming) { /* Device will be handled later. */ rc = 0; - goto out; + goto out_unlock; } + sch_set_cdev(sch, NULL); + spin_unlock_irqrestore(sch->lock, flags); /* Unregister ccw device. */ ccw_device_unregister(cdev); break; -- cgit v1.2.3 From 57b2d68863f281737d8596cb3d76d89d9cc54fd8 Mon Sep 17 00:00:00 2001 From: Dylan Reid Date: Sat, 1 Sep 2012 01:38:19 -0700 Subject: ASoC: samsung dma - Don't indicate support for pause/resume. The pause and resume operations indicate that the stream can be un-paused/resumed from the exact location they were paused/suspended. This is not true for this driver, the pause and suspend triggers share the same code path with stop, they flush all pending DMA transfers. This drops all pending samples. The pause_release/resume triggers are the same as start, except that prepare won't be called beforehand, nothing will be enqueued to the DMA engine and nothing will happen (no audio). Removing the pause flag will let apps know that it isn't supported. Removing the resume flag will cause user space to call prepare and start instead of resume, so audio will continue playing when the system wakes up. Before removing the pause and resume flags, I tested this on an exynos 5250, using 'aplay -i'. Pause/un-pause leads to silence followed by a write error. Suspend/resume testing led to the same result. Removing the two flags fixes suspend/resume (since snd_pcm_prepare is called again). And leads to a proper reporting of pause not supported. Signed-off-by: Dylan Reid Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/samsung/dma.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c index f3ebc38c10fe..b70964ea448c 100644 --- a/sound/soc/samsung/dma.c +++ b/sound/soc/samsung/dma.c @@ -34,9 +34,7 @@ static const struct snd_pcm_hardware dma_hardware = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_PAUSE | - SNDRV_PCM_INFO_RESUME, + SNDRV_PCM_INFO_MMAP_VALID, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U8 | @@ -248,15 +246,11 @@ static int dma_trigger(struct snd_pcm_substream *substream, int cmd) switch (cmd) { case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: prtd->state |= ST_RUNNING; prtd->params->ops->trigger(prtd->params->ch); break; case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: prtd->state &= ~ST_RUNNING; prtd->params->ops->stop(prtd->params->ch); break; -- cgit v1.2.3 From a32826e4aefa905b392d2d862d51365d50d4829b Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 6 Sep 2012 17:47:33 -0600 Subject: ASoC: tegra: fix maxburst settings in dmaengine code The I2S controllers are programmed with an "attention" level of 4 DWORDs. This must match the configuration passed to the DMA driver, so that when they burst in data, they don't overflow the available FIFO space. Also, the burst size is relevant to the destination for playback, and source for capture, not vice-versa as originally written. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/tegra/tegra_pcm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/tegra/tegra_pcm.c b/sound/soc/tegra/tegra_pcm.c index 5658bcec1931..8d6900c1ee47 100644 --- a/sound/soc/tegra/tegra_pcm.c +++ b/sound/soc/tegra/tegra_pcm.c @@ -334,11 +334,11 @@ static int tegra_pcm_hw_params(struct snd_pcm_substream *substream, if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; slave_config.dst_addr = dmap->addr; - slave_config.src_maxburst = 0; + slave_config.dst_maxburst = 4; } else { slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; slave_config.src_addr = dmap->addr; - slave_config.dst_maxburst = 0; + slave_config.src_maxburst = 4; } slave_config.slave_id = dmap->req_sel; -- cgit v1.2.3 From 306c11b28d7bb85a7adda741798a2b6b60dd305a Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 7 Sep 2012 17:30:32 +0200 Subject: target: go through normal processing for zero-length PSCSI commands Right now, commands with a zero-size payload are skipped completely. This is wrong; such commands should be passed down to the device and processed normally. For physical backends, this ignores completely things such as START STOP UNIT. For virtual backends, we have a hack in place to clear a unit attention state on a zero-size REQUEST SENSE, but we still do not report errors properly on zero-length commands---out-of-bounds 0-block reads and writes, too small parameter list lengths, etc. This patch fixes this for PSCSI. Uses of transport_kmap_data_sg are guarded with a check for non-zero cmd->data_length; for all other commands a zero length is handled properly in pscsi_execute_cmd. The sole exception will be for now REPORT LUNS, which is handled through the normal SPC emulation. Signed-off-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pscsi.c | 8 ++++---- drivers/target/target_core_transport.c | 4 +++- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 5f7151d90344..9d7ce3daa262 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -688,11 +688,11 @@ static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg, * Hack to make sure that Write-Protect modepage is set if R/O mode is * forced. */ + if (!cmd->se_deve || !cmd->data_length) + goto after_mode_sense; + if (((cdb[0] == MODE_SENSE) || (cdb[0] == MODE_SENSE_10)) && (status_byte(result) << 1) == SAM_STAT_GOOD) { - if (!cmd->se_deve) - goto after_mode_sense; - if (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY) { unsigned char *buf = transport_kmap_data_sg(cmd); @@ -709,7 +709,7 @@ static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg, } after_mode_sense: - if (sd->type != TYPE_TAPE) + if (sd->type != TYPE_TAPE || !cmd->data_length) goto after_mode_select; /* diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 8a29e3fd0195..7ddb0c33f644 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2300,7 +2300,9 @@ int transport_generic_new_cmd(struct se_cmd *cmd) * into the fabric for data transfers, go ahead and complete it right * away. */ - if (!cmd->data_length) { + if (!cmd->data_length && + (cmd->se_dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV || + cmd->t_task_cdb[0] == REPORT_LUNS) { spin_lock_irq(&cmd->t_state_lock); cmd->t_state = TRANSPORT_COMPLETE; cmd->transport_state |= CMD_T_ACTIVE; -- cgit v1.2.3 From 0d7f1299ca5540b9a63ab6e8bf0e89ea963eb6af Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 7 Sep 2012 17:30:33 +0200 Subject: target: report too-small parameter lists everywhere Several places were not checking that the parameter list length was large enough, and thus accessing invalid memory. Zero-length parameter lists are just a special case of this. Signed-off-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_alua.c | 7 +++++++ drivers/target/target_core_iblock.c | 17 +++++++++++++++-- drivers/target/target_core_pr.c | 8 ++++++++ 3 files changed, 30 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 91799973081a..41641ba54828 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -218,6 +218,13 @@ int target_emulate_set_target_port_groups(struct se_cmd *cmd) cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return -EINVAL; } + if (cmd->data_length < 4) { + pr_warn("SET TARGET PORT GROUPS parameter list length %u too" + " small\n", cmd->data_length); + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; + } + buf = transport_kmap_data_sg(cmd); /* diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index 76db75e836ed..9ba495477fd2 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -325,17 +325,30 @@ static int iblock_execute_unmap(struct se_cmd *cmd) struct iblock_dev *ibd = dev->dev_ptr; unsigned char *buf, *ptr = NULL; sector_t lba; - int size = cmd->data_length; + int size; u32 range; int ret = 0; int dl, bd_dl; + if (cmd->data_length < 8) { + pr_warn("UNMAP parameter list length %u too small\n", + cmd->data_length); + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; + } + buf = transport_kmap_data_sg(cmd); dl = get_unaligned_be16(&buf[0]); bd_dl = get_unaligned_be16(&buf[2]); - size = min(size - 8, bd_dl); + size = cmd->data_length - 8; + if (bd_dl > size) + pr_warn("UNMAP parameter list length %u too small, ignoring bd_dl %u\n", + cmd->data_length, bd_dl); + else + size = bd_dl; + if (size / 16 > dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; ret = -EINVAL; diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 1e946502c378..956c84c6b666 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -1540,6 +1540,14 @@ static int core_scsi3_decode_spec_i_port( tidh_new->dest_local_nexus = 1; list_add_tail(&tidh_new->dest_list, &tid_dest_list); + if (cmd->data_length < 28) { + pr_warn("SPC-PR: Received PR OUT parameter list" + " length too small: %u\n", cmd->data_length); + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; + goto out; + } + buf = transport_kmap_data_sg(cmd); /* * For a PERSISTENT RESERVE OUT specify initiator ports payload, -- cgit v1.2.3 From 9b16b9edb4fd0dc86ee0fbe1f7ede580e26e85f4 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 7 Sep 2012 17:30:34 +0200 Subject: target: fail REPORT LUNS with less than 16 bytes of payload SPC says: "The ALLOCATION LENGTH field is defined in 4.3.5.6. The allocation length should be at least 16. Device servers compliant with SPC return CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB when the allocation length is less than 16 bytes". Testcase: sg_raw -r8 /dev/sdb a0 00 00 00 00 00 00 00 00 08 00 00 should fail with ILLEGAL REQUEST / INVALID FIELD IN CDB sense does not fail without the patch fails correctly with the patch Signed-off-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index cf2c66f3c116..9fc9a6006ca0 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -669,6 +669,13 @@ int target_report_luns(struct se_cmd *se_cmd) unsigned char *buf; u32 lun_count = 0, offset = 8, i; + if (se_cmd->data_length < 16) { + pr_warn("REPORT LUNS allocation length %u too small\n", + se_cmd->data_length); + se_cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; + } + buf = transport_kmap_data_sg(se_cmd); if (!buf) return -ENOMEM; -- cgit v1.2.3 From 3717ef0c63e90686d959158e9728a13a49229be6 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 7 Sep 2012 17:30:35 +0200 Subject: target: support zero-size allocation lengths in transport_kmap_data_sg In order to support zero-size allocation lengths, do not assert that we have a scatterlist until after checking cmd->data_length. But once we do this, we can have two cases of transport_kmap_data_sg returning NULL: a zero-size allocation length, or an out-of-memory condition. Report the latter using sense codes, so that the SCSI command that triggered it will fail. Signed-off-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 7ddb0c33f644..4403477882b3 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2190,7 +2190,6 @@ void *transport_kmap_data_sg(struct se_cmd *cmd) struct page **pages; int i; - BUG_ON(!sg); /* * We need to take into account a possible offset here for fabrics like * tcm_loop who may be using a contig buffer from the SCSI midlayer for @@ -2198,13 +2197,17 @@ void *transport_kmap_data_sg(struct se_cmd *cmd) */ if (!cmd->t_data_nents) return NULL; - else if (cmd->t_data_nents == 1) + + BUG_ON(!sg); + if (cmd->t_data_nents == 1) return kmap(sg_page(sg)) + sg->offset; /* >1 page. use vmap */ pages = kmalloc(sizeof(*pages) * cmd->t_data_nents, GFP_KERNEL); - if (!pages) + if (!pages) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return NULL; + } /* convert sg[] to pages[] */ for_each_sg(cmd->t_data_sg, sg, cmd->t_data_nents, i) { @@ -2213,8 +2216,10 @@ void *transport_kmap_data_sg(struct se_cmd *cmd) cmd->t_data_vmap = vmap(pages, cmd->t_data_nents, VM_MAP, PAGE_KERNEL); kfree(pages); - if (!cmd->t_data_vmap) + if (!cmd->t_data_vmap) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return NULL; + } return cmd->t_data_vmap + cmd->t_data_sg[0].offset; } -- cgit v1.2.3 From 32a8811ff164f882712c17946e58e52444f464a7 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 7 Sep 2012 17:30:36 +0200 Subject: target: support zero allocation length in REQUEST SENSE Similar to INQUIRY and MODE SENSE, construct the sense data in a buffer and later copy it to the scatterlist. Do not do anything, but still clear a pending unit attention condition, if the allocation length is zero. However, SPC tells us that "If a REQUEST SENSE command is terminated with CHECK CONDITION status [and] the REQUEST SENSE command was received on an I_T nexus with a pending unit attention condition (i.e., before the device server reports CHECK CONDITION status), then the device server shall not clear the pending unit attention condition." Do the transport_kmap_data_sg early to detect this case. It also tells us "Device servers shall not adjust the additional sense length to reflect truncation if the allocation length is less than the sense data available", so do not do that! Note that the err variable is write-only. Signed-off-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_spc.c | 35 ++++++++++++++++++----------------- include/target/target_core_base.h | 1 + 2 files changed, 19 insertions(+), 17 deletions(-) diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c index 4c861de538c9..388a922c8f6d 100644 --- a/drivers/target/target_core_spc.c +++ b/drivers/target/target_core_spc.c @@ -877,9 +877,11 @@ static int spc_emulate_modesense(struct se_cmd *cmd) static int spc_emulate_request_sense(struct se_cmd *cmd) { unsigned char *cdb = cmd->t_task_cdb; - unsigned char *buf; + unsigned char *rbuf; u8 ua_asc = 0, ua_ascq = 0; - int err = 0; + unsigned char buf[SE_SENSE_BUF]; + + memset(buf, 0, SE_SENSE_BUF); if (cdb[1] & 0x01) { pr_err("REQUEST_SENSE description emulation not" @@ -888,20 +890,21 @@ static int spc_emulate_request_sense(struct se_cmd *cmd) return -ENOSYS; } - buf = transport_kmap_data_sg(cmd); - - if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { + rbuf = transport_kmap_data_sg(cmd); + if (cmd->scsi_sense_reason != 0) { + /* + * Out of memory. We will fail with CHECK CONDITION, so + * we must not clear the unit attention condition. + */ + target_complete_cmd(cmd, CHECK_CONDITION); + return 0; + } else if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { /* * CURRENT ERROR, UNIT ATTENTION */ buf[0] = 0x70; buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION; - if (cmd->data_length < 18) { - buf[7] = 0x00; - err = -EINVAL; - goto end; - } /* * The Additional Sense Code (ASC) from the UNIT ATTENTION */ @@ -915,11 +918,6 @@ static int spc_emulate_request_sense(struct se_cmd *cmd) buf[0] = 0x70; buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE; - if (cmd->data_length < 18) { - buf[7] = 0x00; - err = -EINVAL; - goto end; - } /* * NO ADDITIONAL SENSE INFORMATION */ @@ -927,8 +925,11 @@ static int spc_emulate_request_sense(struct se_cmd *cmd) buf[7] = 0x0A; } -end: - transport_kunmap_data_sg(cmd); + if (rbuf) { + memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length)); + transport_kunmap_data_sg(cmd); + } + target_complete_cmd(cmd, GOOD); return 0; } diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 015cea01ae39..5be89373ceac 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -121,6 +121,7 @@ #define SE_INQUIRY_BUF 512 #define SE_MODE_PAGE_BUF 512 +#define SE_SENSE_BUF 96 /* struct se_hba->hba_flags */ enum hba_flags_table { -- cgit v1.2.3 From 6abbdf38363f064c8a50150c9b709682764483b3 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 7 Sep 2012 17:30:37 +0200 Subject: target: go through normal processing for zero-length REQUEST_SENSE Now that spc_emulate_request_sense has been taught to process zero-length REQUEST SENSE correctly, drop the special handling of unit attention conditions from transport_generic_new_cmd. However, for now REQUEST SENSE will be the only command that goes through emulation for zero lengths. (nab: Fix up zero-length check in transport_generic_new_cmd) Signed-off-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 4403477882b3..269f54488397 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2306,20 +2306,13 @@ int transport_generic_new_cmd(struct se_cmd *cmd) * away. */ if (!cmd->data_length && - (cmd->se_dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV || - cmd->t_task_cdb[0] == REPORT_LUNS) { + cmd->t_task_cdb[0] != REQUEST_SENSE && + cmd->se_dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV) { spin_lock_irq(&cmd->t_state_lock); cmd->t_state = TRANSPORT_COMPLETE; cmd->transport_state |= CMD_T_ACTIVE; spin_unlock_irq(&cmd->t_state_lock); - if (cmd->t_task_cdb[0] == REQUEST_SENSE) { - u8 ua_asc = 0, ua_ascq = 0; - - core_scsi3_ua_clear_for_request_sense(cmd, - &ua_asc, &ua_ascq); - } - INIT_WORK(&cmd->work, target_complete_ok_work); queue_work(target_completion_wq, &cmd->work); return 0; -- cgit v1.2.3 From 92dd6c3d4d4e0a26c9bb987b3f2f08c1da86d9ce Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 7 Sep 2012 06:51:23 +0000 Subject: RDMA/cxgb4: Move dereference below NULL test spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Acked-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb4/cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 51f42061dae9..6cfd4d8fd0bd 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -1361,11 +1361,11 @@ static int abort_rpl(struct c4iw_dev *dev, struct sk_buff *skb) struct tid_info *t = dev->rdev.lldi.tids; ep = lookup_tid(t, tid); - PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid); if (!ep) { printk(KERN_WARNING MOD "Abort rpl to freed endpoint\n"); return 0; } + PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid); mutex_lock(&ep->com.mutex); switch (ep->com.state) { case ABORTING: -- cgit v1.2.3 From db2e1f43e7b2320d0450fe34e5ac4ac4d8c7708d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 6 Sep 2012 09:44:59 +0200 Subject: s390/hwcaps: do not report high gprs for 31 bit kernel The bit for high gprs in the AT_HWCAP auxiliary vector field and the highgprs tag in the output of /proc/cpuinfo should not be set for 31 bit kernels. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index f86c81e13c37..40b57693de38 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -974,11 +974,13 @@ static void __init setup_hwcaps(void) if (MACHINE_HAS_HPAGE) elf_hwcap |= HWCAP_S390_HPAGE; +#if defined(CONFIG_64BIT) /* * 64-bit register support for 31-bit processes * HWCAP_S390_HIGH_GPRS is bit 9. */ elf_hwcap |= HWCAP_S390_HIGH_GPRS; +#endif get_cpu_id(&cpu_id); switch (cpu_id.machine) { -- cgit v1.2.3 From e352614cd3e7a5f7af7cff894a3b5a705181de21 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 10 Sep 2012 12:52:02 +0800 Subject: hwspinlock/core: move the dereference below the NULL test The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Signed-off-by: Ohad Ben-Cohen --- drivers/hwspinlock/hwspinlock_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c index 1201a15784c3..db713c0dfba4 100644 --- a/drivers/hwspinlock/hwspinlock_core.c +++ b/drivers/hwspinlock/hwspinlock_core.c @@ -552,7 +552,7 @@ EXPORT_SYMBOL_GPL(hwspin_lock_request_specific); */ int hwspin_lock_free(struct hwspinlock *hwlock) { - struct device *dev = hwlock->bank->dev; + struct device *dev; struct hwspinlock *tmp; int ret; @@ -561,6 +561,7 @@ int hwspin_lock_free(struct hwspinlock *hwlock) return -EINVAL; } + dev = hwlock->bank->dev; mutex_lock(&hwspinlock_tree_lock); /* make sure the hwspinlock is used */ -- cgit v1.2.3 From c06fad9d28c95b024ea10455cf1397432b12848d Mon Sep 17 00:00:00 2001 From: Philip, Avinash Date: Thu, 23 Aug 2012 12:29:46 +0530 Subject: pwm: pwm-tiecap: Disable APWM mode after configure APWM mode is enabled while configuring PWM device. This was done to handle shadow & immediate mode update of period and compare registers. However, leaving it enabled after configuring will cause APWM output on PWM pin even before enabling PWM device. Fix the same by disabling APWM mode after configuring if PWM device is not running. Signed-off-by: Philip, Avinash Signed-off-by: Thierry Reding --- drivers/pwm/pwm-tiecap.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index 0b66d0f25922..4b6688909fee 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -100,6 +100,13 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, writel(period_cycles, pc->mmio_base + CAP3); } + if (!test_bit(PWMF_ENABLED, &pwm->flags)) { + reg_val = readw(pc->mmio_base + ECCTL2); + /* Disable APWM mode to put APWM output Low */ + reg_val &= ~ECCTL2_APWM_MODE; + writew(reg_val, pc->mmio_base + ECCTL2); + } + pm_runtime_put_sync(pc->chip.dev); return 0; } -- cgit v1.2.3 From 01b2d4536f0215c6d97d77e157afee04300ffc90 Mon Sep 17 00:00:00 2001 From: Philip, Avinash Date: Thu, 6 Sep 2012 10:44:25 +0530 Subject: pwm: pwm-tiehrpwm: Fix conflicting channel period setting EHRPWM hardware supports 2 independent PWM channels. However the device uses only one register to handle period setting for both channels. So both channels should be configured for same period (in nsec). Fix the same by returning error for conflicting period values. However, allow 1. Configuration of period settings if not conflicting with other channels 2. Re-configuring of period settings if no other channels being configured Signed-off-by: Philip, Avinash Signed-off-by: Thierry Reding --- drivers/pwm/pwm-tiehrpwm.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index c3756d1be194..b1996bcd5b78 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -104,6 +104,7 @@ struct ehrpwm_pwm_chip { struct pwm_chip chip; unsigned int clk_rate; void __iomem *mmio_base; + unsigned long period_cycles[NUM_PWM_CHANNEL]; }; static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip) @@ -210,6 +211,7 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, unsigned long long c; unsigned long period_cycles, duty_cycles; unsigned short ps_divval, tb_divval; + int i; if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC) return -ERANGE; @@ -229,6 +231,28 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, duty_cycles = (unsigned long)c; } + /* + * Period values should be same for multiple PWM channels as IP uses + * same period register for multiple channels. + */ + for (i = 0; i < NUM_PWM_CHANNEL; i++) { + if (pc->period_cycles[i] && + (pc->period_cycles[i] != period_cycles)) { + /* + * Allow channel to reconfigure period if no other + * channels being configured. + */ + if (i == pwm->hwpwm) + continue; + + dev_err(chip->dev, "Period value conflicts with channel %d\n", + i); + return -EINVAL; + } + } + + pc->period_cycles[pwm->hwpwm] = period_cycles; + /* Configure clock prescaler to support Low frequency PWM wave */ if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval, &tb_divval)) { @@ -320,10 +344,15 @@ static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) { + struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); + if (test_bit(PWMF_ENABLED, &pwm->flags)) { dev_warn(chip->dev, "Removing PWM device without disabling\n"); pm_runtime_put_sync(chip->dev); } + + /* set period value to zero on free */ + pc->period_cycles[pwm->hwpwm] = 0; } static const struct pwm_ops ehrpwm_pwm_ops = { -- cgit v1.2.3 From 308b135e4fcc00c80c07e0e04e7afa8edf78583c Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Mon, 27 Aug 2012 12:52:24 -0600 Subject: hpwdt: Fix kdump issue in hpwdt kdump can be interrupted by watchdog timer when the timer is left activated on the crash kernel. Changed the hpwdt driver to disable watchdog timer at boot-time. This assures that watchdog timer is disabled until /dev/watchdog is opened, and prevents watchdog timer to be left running on the crash kernel. Signed-off-by: Toshi Kani Tested-by: Lisa Mitchell Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck Cc: stable --- drivers/watchdog/hpwdt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 1eff743ec497..ae60406ea8a1 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -814,6 +814,9 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev, hpwdt_timer_reg = pci_mem_addr + 0x70; hpwdt_timer_con = pci_mem_addr + 0x72; + /* Make sure that timer is disabled until /dev/watchdog is opened */ + hpwdt_stop(); + /* Make sure that we have a valid soft_margin */ if (hpwdt_change_timer(soft_margin)) hpwdt_change_timer(DEFAULT_MARGIN); -- cgit v1.2.3 From b232a70a1735c004f9ee6fdf363def527b9234b6 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 10 Sep 2012 12:41:15 +0800 Subject: watchdog: move the dereference below the NULL test The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/watchdog_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c index 6aa46a90ff02..3796434991fa 100644 --- a/drivers/watchdog/watchdog_core.c +++ b/drivers/watchdog/watchdog_core.c @@ -128,11 +128,12 @@ EXPORT_SYMBOL_GPL(watchdog_register_device); void watchdog_unregister_device(struct watchdog_device *wdd) { int ret; - int devno = wdd->cdev.dev; + int devno; if (wdd == NULL) return; + devno = wdd->cdev.dev; ret = watchdog_dev_unregister(wdd); if (ret) pr_err("error unregistering /dev/watchdog (err=%d)\n", ret); -- cgit v1.2.3 From 8a0961482698290713d14d7755d9280397804487 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 5 Sep 2012 11:49:21 +0200 Subject: brcmsmac: fix mismatch in number of custom regulatory rules The driver provides the cfg80211 regulatory framework with a set of custom rules. However, there was a mismatch in number of rules and the actual rules provided. This resulted in setting an invalid power level: ieee80211 phy0: brcms_ops_config: change channel 13 ieee80211 phy0: brcms_ops_config: Error setting power_level (8758364) Closer look in cfg80211 regulatory blurb showed following bogus rule: cfg80211: 0 KHz - -60446948 KHz @ 875836468 KHz), (875836468 mBi, 875836468 mBm) Cc: Seth Forshee Reviewed-by: Piotr Haber Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Reviewed-by: Seth Forshee Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/channel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index 7ed7d7577024..64a48f06d68b 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -77,7 +77,7 @@ NL80211_RRF_NO_IBSS) static const struct ieee80211_regdomain brcms_regdom_x2 = { - .n_reg_rules = 7, + .n_reg_rules = 6, .alpha2 = "X2", .reg_rules = { BRCM_2GHZ_2412_2462, -- cgit v1.2.3 From 74673db99ca3c09d34ea479f684522ceedb65eb9 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 8 Sep 2012 15:24:17 +0200 Subject: ath9k: make PA linearization optional, disabled by default and fix checks Some checks for PA linearization support checked ATH9K_HW_CAP_PAPRD and some used the EEPROM ops, leading to issues in tx power handling, since those two can be out of sync. Disable the feature by default, since it has been reported that it can cause damage to the rx path under some circumstances. It can now be enabled for testing via debugfs. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 4 ++++ drivers/net/wireless/ath/ath9k/debug.c | 2 ++ drivers/net/wireless/ath/ath9k/hw.c | 4 ---- drivers/net/wireless/ath/ath9k/hw.h | 3 +-- drivers/net/wireless/ath/ath9k/link.c | 2 +- 5 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 2588848f4a82..d066f2516e47 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -2982,6 +2982,10 @@ static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah, case EEP_RX_MASK: return pBase->txrxMask & 0xf; case EEP_PAPRD: + if (AR_SREV_9462(ah)) + return false; + if (!ah->config.enable_paprd); + return false; return !!(pBase->featureEnable & BIT(5)); case EEP_CHAIN_MASK_REDUCE: return (pBase->miscConfiguration >> 0x3) & 0x1; diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 68b643c8943c..c8ef30127adb 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -1577,6 +1577,8 @@ int ath9k_init_debug(struct ath_hw *ah) sc->debug.debugfs_phy, sc, &fops_tx_chainmask); debugfs_create_file("disable_ani", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_disable_ani); + debugfs_create_bool("paprd", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, + &sc->sc_ah->config.enable_paprd); debugfs_create_file("regidx", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_regidx); debugfs_create_file("regval", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 48af40151d23..4faf0a395876 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2497,10 +2497,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) pCap->rx_status_len = sizeof(struct ar9003_rxs); pCap->tx_desc_len = sizeof(struct ar9003_txc); pCap->txs_len = sizeof(struct ar9003_txs); - if (!ah->config.paprd_disable && - ah->eep_ops->get_eeprom(ah, EEP_PAPRD) && - !AR_SREV_9462(ah)) - pCap->hw_caps |= ATH9K_HW_CAP_PAPRD; } else { pCap->tx_desc_len = sizeof(struct ath_desc); if (AR_SREV_9280_20(ah)) diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 6599a75f01fe..de6968fc64f4 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -236,7 +236,6 @@ enum ath9k_hw_caps { ATH9K_HW_CAP_LDPC = BIT(6), ATH9K_HW_CAP_FASTCLOCK = BIT(7), ATH9K_HW_CAP_SGI_20 = BIT(8), - ATH9K_HW_CAP_PAPRD = BIT(9), ATH9K_HW_CAP_ANT_DIV_COMB = BIT(10), ATH9K_HW_CAP_2GHZ = BIT(11), ATH9K_HW_CAP_5GHZ = BIT(12), @@ -287,12 +286,12 @@ struct ath9k_ops_config { u8 pcie_clock_req; u32 pcie_waen; u8 analog_shiftreg; - u8 paprd_disable; u32 ofdm_trig_low; u32 ofdm_trig_high; u32 cck_trig_high; u32 cck_trig_low; u32 enable_ani; + u32 enable_paprd; int serialize_regmode; bool rx_intr_mitigation; bool tx_intr_mitigation; diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c index 825a29cc9313..7b88b9c39ccd 100644 --- a/drivers/net/wireless/ath/ath9k/link.c +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -423,7 +423,7 @@ set_timer: cal_interval = min(cal_interval, (u32)short_cal_interval); mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval)); - if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) { + if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD) && ah->caldata) { if (!ah->caldata->paprd_done) ieee80211_queue_work(sc->hw, &sc->paprd_work); else if (!ah->paprd_table_write_done) -- cgit v1.2.3 From 4abd044af91057f7ea661a0f10c00a9673beef6b Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 10 Sep 2012 10:05:26 +0100 Subject: brcm80211: fix missing allocation failure check Check for oobirq_entry allocation failure to avoid NULL pointer dereferencing. Signed-off-by: Colin Ian King Acked-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 49765d34b4e0..7c4ee72f9d56 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -638,6 +638,8 @@ static int brcmf_sdio_pd_probe(struct platform_device *pdev) oobirq_entry = kzalloc(sizeof(struct brcmf_sdio_oobirq), GFP_KERNEL); + if (!oobirq_entry) + return -ENOMEM; oobirq_entry->irq = res->start; oobirq_entry->flags = res->flags & IRQF_TRIGGER_MASK; list_add_tail(&oobirq_entry->list, &oobirq_lh); -- cgit v1.2.3 From eeb0074f36d1ab0729d06f1c56add9c7799679e2 Mon Sep 17 00:00:00 2001 From: Fernando Guzman Lugo Date: Wed, 29 Aug 2012 19:24:52 -0500 Subject: rpmsg: fix dma_free_coherent dev parameter dma_alloc/free_coherent APIs requires the platform specific remoteproc device as the device parameter. We are passing vdev->dev.parent to the dma_free_coherent function which is the generic rproc device and it is wrong, it has to be vdev->dev.parent->parent instead, same as when we call dma_alloc_coherent function. Signed-off-by: Fernando Guzman Lugo Signed-off-by: Ohad Ben-Cohen --- drivers/rpmsg/virtio_rpmsg_bus.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index 590cfafc7c17..1859f71372e2 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -1008,8 +1008,8 @@ static int rpmsg_probe(struct virtio_device *vdev) return 0; free_coherent: - dma_free_coherent(vdev->dev.parent, RPMSG_TOTAL_BUF_SPACE, bufs_va, - vrp->bufs_dma); + dma_free_coherent(vdev->dev.parent->parent, RPMSG_TOTAL_BUF_SPACE, + bufs_va, vrp->bufs_dma); vqs_del: vdev->config->del_vqs(vrp->vdev); free_vrp: @@ -1043,7 +1043,7 @@ static void __devexit rpmsg_remove(struct virtio_device *vdev) vdev->config->del_vqs(vrp->vdev); - dma_free_coherent(vdev->dev.parent, RPMSG_TOTAL_BUF_SPACE, + dma_free_coherent(vdev->dev.parent->parent, RPMSG_TOTAL_BUF_SPACE, vrp->rbufs, vrp->bufs_dma); kfree(vrp); -- cgit v1.2.3 From 2fc136eecd0c647a6b13fcd00d0c41a1a28f35a5 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 12 Sep 2012 12:44:30 +0100 Subject: xen/m2p: do not reuse kmap_op->dev_bus_addr If the caller passes a valid kmap_op to m2p_add_override, we use kmap_op->dev_bus_addr to store the original mfn, but dev_bus_addr is part of the interface with Xen and if we are batching the hypercalls it might not have been written by the hypervisor yet. That means that later on Xen will write to it and we'll think that the original mfn is actually what Xen has written to it. Rather than "stealing" struct members from kmap_op, keep using page->index to store the original mfn and add another parameter to m2p_remove_override to get the corresponding kmap_op instead. It is now responsibility of the caller to keep track of which kmap_op corresponds to a particular page in the m2p_override (gntdev, the only user of this interface that passes a valid kmap_op, is already doing that). CC: stable@kernel.org Reported-and-Tested-By: Sander Eikelenboom Signed-off-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/include/asm/xen/page.h | 3 ++- arch/x86/xen/p2m.c | 27 +++++++++++---------------- drivers/block/xen-blkback/blkback.c | 2 +- drivers/xen/gntdev.c | 5 +++-- drivers/xen/grant-table.c | 6 ++++-- include/xen/grant_table.h | 3 ++- 6 files changed, 23 insertions(+), 23 deletions(-) diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index 93971e841dd5..472b9b783019 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -51,7 +51,8 @@ extern unsigned long set_phys_range_identity(unsigned long pfn_s, extern int m2p_add_override(unsigned long mfn, struct page *page, struct gnttab_map_grant_ref *kmap_op); -extern int m2p_remove_override(struct page *page, bool clear_pte); +extern int m2p_remove_override(struct page *page, + struct gnttab_map_grant_ref *kmap_op); extern struct page *m2p_find_override(unsigned long mfn); extern unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn); diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index 76ba0e97e530..72213da605f5 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -828,9 +828,6 @@ int m2p_add_override(unsigned long mfn, struct page *page, xen_mc_issue(PARAVIRT_LAZY_MMU); } - /* let's use dev_bus_addr to record the old mfn instead */ - kmap_op->dev_bus_addr = page->index; - page->index = (unsigned long) kmap_op; } spin_lock_irqsave(&m2p_override_lock, flags); list_add(&page->lru, &m2p_overrides[mfn_hash(mfn)]); @@ -857,7 +854,8 @@ int m2p_add_override(unsigned long mfn, struct page *page, return 0; } EXPORT_SYMBOL_GPL(m2p_add_override); -int m2p_remove_override(struct page *page, bool clear_pte) +int m2p_remove_override(struct page *page, + struct gnttab_map_grant_ref *kmap_op) { unsigned long flags; unsigned long mfn; @@ -887,10 +885,8 @@ int m2p_remove_override(struct page *page, bool clear_pte) WARN_ON(!PagePrivate(page)); ClearPagePrivate(page); - if (clear_pte) { - struct gnttab_map_grant_ref *map_op = - (struct gnttab_map_grant_ref *) page->index; - set_phys_to_machine(pfn, map_op->dev_bus_addr); + set_phys_to_machine(pfn, page->index); + if (kmap_op != NULL) { if (!PageHighMem(page)) { struct multicall_space mcs; struct gnttab_unmap_grant_ref *unmap_op; @@ -902,13 +898,13 @@ int m2p_remove_override(struct page *page, bool clear_pte) * issued. In this case handle is going to -1 because * it hasn't been modified yet. */ - if (map_op->handle == -1) + if (kmap_op->handle == -1) xen_mc_flush(); /* - * Now if map_op->handle is negative it means that the + * Now if kmap_op->handle is negative it means that the * hypercall actually returned an error. */ - if (map_op->handle == GNTST_general_error) { + if (kmap_op->handle == GNTST_general_error) { printk(KERN_WARNING "m2p_remove_override: " "pfn %lx mfn %lx, failed to modify kernel mappings", pfn, mfn); @@ -918,8 +914,8 @@ int m2p_remove_override(struct page *page, bool clear_pte) mcs = xen_mc_entry( sizeof(struct gnttab_unmap_grant_ref)); unmap_op = mcs.args; - unmap_op->host_addr = map_op->host_addr; - unmap_op->handle = map_op->handle; + unmap_op->host_addr = kmap_op->host_addr; + unmap_op->handle = kmap_op->handle; unmap_op->dev_bus_addr = 0; MULTI_grant_table_op(mcs.mc, @@ -930,10 +926,9 @@ int m2p_remove_override(struct page *page, bool clear_pte) set_pte_at(&init_mm, address, ptep, pfn_pte(pfn, PAGE_KERNEL)); __flush_tlb_single(address); - map_op->host_addr = 0; + kmap_op->host_addr = 0; } - } else - set_phys_to_machine(pfn, page->index); + } /* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present * somewhere in this domain, even before being added to the diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index 73f196ca713f..c6decb901e5e 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -337,7 +337,7 @@ static void xen_blkbk_unmap(struct pending_req *req) invcount++; } - ret = gnttab_unmap_refs(unmap, pages, invcount, false); + ret = gnttab_unmap_refs(unmap, NULL, pages, invcount); BUG_ON(ret); } diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 1ffd03bf8e10..7f1241608489 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -314,8 +314,9 @@ static int __unmap_grant_pages(struct grant_map *map, int offset, int pages) } } - err = gnttab_unmap_refs(map->unmap_ops + offset, map->pages + offset, - pages, true); + err = gnttab_unmap_refs(map->unmap_ops + offset, + use_ptemod ? map->kmap_ops + offset : NULL, map->pages + offset, + pages); if (err) return err; diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 0bfc1ef11259..006726688baf 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -870,7 +870,8 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, EXPORT_SYMBOL_GPL(gnttab_map_refs); int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, - struct page **pages, unsigned int count, bool clear_pte) + struct gnttab_map_grant_ref *kmap_ops, + struct page **pages, unsigned int count) { int i, ret; bool lazy = false; @@ -888,7 +889,8 @@ int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, } for (i = 0; i < count; i++) { - ret = m2p_remove_override(pages[i], clear_pte); + ret = m2p_remove_override(pages[i], kmap_ops ? + &kmap_ops[i] : NULL); if (ret) return ret; } diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h index 11e27c3af3cb..f19fff8650e9 100644 --- a/include/xen/grant_table.h +++ b/include/xen/grant_table.h @@ -187,6 +187,7 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, struct gnttab_map_grant_ref *kmap_ops, struct page **pages, unsigned int count); int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, - struct page **pages, unsigned int count, bool clear_pte); + struct gnttab_map_grant_ref *kunmap_ops, + struct page **pages, unsigned int count); #endif /* __ASM_GNTTAB_H__ */ -- cgit v1.2.3 From 66172c09938bfc4efdcf9b5e0246a85b9b76dd54 Mon Sep 17 00:00:00 2001 From: Shlomo Pongratz Date: Wed, 29 Aug 2012 15:14:33 +0000 Subject: IPoIB: Fix memory leak in the neigh table deletion flow If the neighbours hash table is empty when unloading the module, then ipoib_flush_neighs(), the cleanup routine, isn't called and the memory used for the hash table itself leaked. To fix this, ipoib_flush_neighs() is allways called, and another completion object is added to signal when the table is freed. Once invoked, ipoib_flush_neighs() flushes all the neighbours (if there are any), calls the the hash table RCU free routine, which now signals completion of the deletion process, and waits for the last neighbour to be freed. Signed-off-by: Shlomo Pongratz Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 4 ++++ drivers/infiniband/ulp/ipoib/ipoib_main.c | 23 +++++++++++++++++------ 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index ca43901ed861..e6bbeae1c309 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -262,7 +262,10 @@ struct ipoib_ethtool_st { u16 max_coalesced_frames; }; +struct ipoib_neigh_table; + struct ipoib_neigh_hash { + struct ipoib_neigh_table *ntbl; struct ipoib_neigh __rcu **buckets; struct rcu_head rcu; u32 mask; @@ -274,6 +277,7 @@ struct ipoib_neigh_table { rwlock_t rwlock; atomic_t entries; struct completion flushed; + struct completion deleted; }; /* diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 3e2085a3ee47..72c1fc28f079 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1095,6 +1095,7 @@ static int ipoib_neigh_hash_init(struct ipoib_dev_priv *priv) htbl->mask = (size - 1); htbl->buckets = buckets; ntbl->htbl = htbl; + htbl->ntbl = ntbl; atomic_set(&ntbl->entries, 0); /* start garbage collection */ @@ -1111,9 +1112,11 @@ static void neigh_hash_free_rcu(struct rcu_head *head) struct ipoib_neigh_hash, rcu); struct ipoib_neigh __rcu **buckets = htbl->buckets; + struct ipoib_neigh_table *ntbl = htbl->ntbl; kfree(buckets); kfree(htbl); + complete(&ntbl->deleted); } void ipoib_del_neighs_by_gid(struct net_device *dev, u8 *gid) @@ -1164,7 +1167,9 @@ static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) struct ipoib_neigh_table *ntbl = &priv->ntbl; struct ipoib_neigh_hash *htbl; unsigned long flags; - int i; + int i, wait_flushed = 0; + + init_completion(&priv->ntbl.flushed); write_lock_bh(&ntbl->rwlock); @@ -1173,6 +1178,10 @@ static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) if (!htbl) goto out_unlock; + wait_flushed = atomic_read(&priv->ntbl.entries); + if (!wait_flushed) + goto free_htbl; + for (i = 0; i < htbl->size; i++) { struct ipoib_neigh *neigh; struct ipoib_neigh __rcu **np = &htbl->buckets[i]; @@ -1190,11 +1199,14 @@ static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) } } +free_htbl: rcu_assign_pointer(ntbl->htbl, NULL); call_rcu(&htbl->rcu, neigh_hash_free_rcu); out_unlock: write_unlock_bh(&ntbl->rwlock); + if (wait_flushed) + wait_for_completion(&priv->ntbl.flushed); } static void ipoib_neigh_hash_uninit(struct net_device *dev) @@ -1203,7 +1215,7 @@ static void ipoib_neigh_hash_uninit(struct net_device *dev) int stopped; ipoib_dbg(priv, "ipoib_neigh_hash_uninit\n"); - init_completion(&priv->ntbl.flushed); + init_completion(&priv->ntbl.deleted); set_bit(IPOIB_NEIGH_TBL_FLUSH, &priv->flags); /* Stop GC if called at init fail need to cancel work */ @@ -1211,10 +1223,9 @@ static void ipoib_neigh_hash_uninit(struct net_device *dev) if (!stopped) cancel_delayed_work(&priv->neigh_reap_task); - if (atomic_read(&priv->ntbl.entries)) { - ipoib_flush_neighs(priv); - wait_for_completion(&priv->ntbl.flushed); - } + ipoib_flush_neighs(priv); + + wait_for_completion(&priv->ntbl.deleted); } -- cgit v1.2.3 From b5120a6e11e90d98d8a752545ac60bfa1ea95f1a Mon Sep 17 00:00:00 2001 From: Shlomo Pongratz Date: Wed, 29 Aug 2012 15:14:34 +0000 Subject: IPoIB: Fix AB-BA deadlock when deleting neighbours Lockdep points out a circular locking dependency betwwen the ipoib device priv spinlock (priv->lock) and the neighbour table rwlock (ntbl->rwlock). In the normal path, ie neigbour garbage collection task, the neigh table rwlock is taken first and then if the neighbour needs to be deleted, priv->lock is taken. However in some error paths, such as in ipoib_cm_handle_tx_wc(), priv->lock is taken first and then ipoib_neigh_free routine is called which in turn takes the neighbour table ntbl->rwlock. The solution is to get rid the neigh table rwlock completely and use only priv->lock. Signed-off-by: Shlomo Pongratz Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 1 - drivers/infiniband/ulp/ipoib/ipoib_main.c | 70 ++++++++++---------------- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 2 - 3 files changed, 27 insertions(+), 46 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index e6bbeae1c309..0af216d21f87 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -274,7 +274,6 @@ struct ipoib_neigh_hash { struct ipoib_neigh_table { struct ipoib_neigh_hash __rcu *htbl; - rwlock_t rwlock; atomic_t entries; struct completion flushed; struct completion deleted; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 72c1fc28f079..1e19b5ae7c47 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -546,15 +546,15 @@ static void neigh_add_path(struct sk_buff *skb, u8 *daddr, struct ipoib_neigh *neigh; unsigned long flags; + spin_lock_irqsave(&priv->lock, flags); neigh = ipoib_neigh_alloc(daddr, dev); if (!neigh) { + spin_unlock_irqrestore(&priv->lock, flags); ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); return; } - spin_lock_irqsave(&priv->lock, flags); - path = __path_find(dev, daddr + 4); if (!path) { path = path_rec_create(dev, daddr + 4); @@ -863,10 +863,10 @@ static void __ipoib_reap_neigh(struct ipoib_dev_priv *priv) if (test_bit(IPOIB_STOP_NEIGH_GC, &priv->flags)) return; - write_lock_bh(&ntbl->rwlock); + spin_lock_irqsave(&priv->lock, flags); htbl = rcu_dereference_protected(ntbl->htbl, - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); if (!htbl) goto out_unlock; @@ -883,16 +883,14 @@ static void __ipoib_reap_neigh(struct ipoib_dev_priv *priv) struct ipoib_neigh __rcu **np = &htbl->buckets[i]; while ((neigh = rcu_dereference_protected(*np, - lockdep_is_held(&ntbl->rwlock))) != NULL) { + lockdep_is_held(&priv->lock))) != NULL) { /* was the neigh idle for two GC periods */ if (time_after(neigh_obsolete, neigh->alive)) { rcu_assign_pointer(*np, rcu_dereference_protected(neigh->hnext, - lockdep_is_held(&ntbl->rwlock))); + lockdep_is_held(&priv->lock))); /* remove from path/mc list */ - spin_lock_irqsave(&priv->lock, flags); list_del(&neigh->list); - spin_unlock_irqrestore(&priv->lock, flags); call_rcu(&neigh->rcu, ipoib_neigh_reclaim); } else { np = &neigh->hnext; @@ -902,7 +900,7 @@ static void __ipoib_reap_neigh(struct ipoib_dev_priv *priv) } out_unlock: - write_unlock_bh(&ntbl->rwlock); + spin_unlock_irqrestore(&priv->lock, flags); } static void ipoib_reap_neigh(struct work_struct *work) @@ -947,10 +945,8 @@ struct ipoib_neigh *ipoib_neigh_alloc(u8 *daddr, struct ipoib_neigh *neigh; u32 hash_val; - write_lock_bh(&ntbl->rwlock); - htbl = rcu_dereference_protected(ntbl->htbl, - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); if (!htbl) { neigh = NULL; goto out_unlock; @@ -961,10 +957,10 @@ struct ipoib_neigh *ipoib_neigh_alloc(u8 *daddr, */ hash_val = ipoib_addr_hash(htbl, daddr); for (neigh = rcu_dereference_protected(htbl->buckets[hash_val], - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); neigh != NULL; neigh = rcu_dereference_protected(neigh->hnext, - lockdep_is_held(&ntbl->rwlock))) { + lockdep_is_held(&priv->lock))) { if (memcmp(daddr, neigh->daddr, INFINIBAND_ALEN) == 0) { /* found, take one ref on behalf of the caller */ if (!atomic_inc_not_zero(&neigh->refcnt)) { @@ -987,12 +983,11 @@ struct ipoib_neigh *ipoib_neigh_alloc(u8 *daddr, /* put in hash */ rcu_assign_pointer(neigh->hnext, rcu_dereference_protected(htbl->buckets[hash_val], - lockdep_is_held(&ntbl->rwlock))); + lockdep_is_held(&priv->lock))); rcu_assign_pointer(htbl->buckets[hash_val], neigh); atomic_inc(&ntbl->entries); out_unlock: - write_unlock_bh(&ntbl->rwlock); return neigh; } @@ -1040,35 +1035,29 @@ void ipoib_neigh_free(struct ipoib_neigh *neigh) struct ipoib_neigh *n; u32 hash_val; - write_lock_bh(&ntbl->rwlock); - htbl = rcu_dereference_protected(ntbl->htbl, - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); if (!htbl) - goto out_unlock; + return; hash_val = ipoib_addr_hash(htbl, neigh->daddr); np = &htbl->buckets[hash_val]; for (n = rcu_dereference_protected(*np, - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); n != NULL; n = rcu_dereference_protected(*np, - lockdep_is_held(&ntbl->rwlock))) { + lockdep_is_held(&priv->lock))) { if (n == neigh) { /* found */ rcu_assign_pointer(*np, rcu_dereference_protected(neigh->hnext, - lockdep_is_held(&ntbl->rwlock))); + lockdep_is_held(&priv->lock))); call_rcu(&neigh->rcu, ipoib_neigh_reclaim); - goto out_unlock; + return; } else { np = &n->hnext; } } - -out_unlock: - write_unlock_bh(&ntbl->rwlock); - } static int ipoib_neigh_hash_init(struct ipoib_dev_priv *priv) @@ -1080,7 +1069,6 @@ static int ipoib_neigh_hash_init(struct ipoib_dev_priv *priv) clear_bit(IPOIB_NEIGH_TBL_FLUSH, &priv->flags); ntbl->htbl = NULL; - rwlock_init(&ntbl->rwlock); htbl = kzalloc(sizeof(*htbl), GFP_KERNEL); if (!htbl) return -ENOMEM; @@ -1128,10 +1116,10 @@ void ipoib_del_neighs_by_gid(struct net_device *dev, u8 *gid) int i; /* remove all neigh connected to a given path or mcast */ - write_lock_bh(&ntbl->rwlock); + spin_lock_irqsave(&priv->lock, flags); htbl = rcu_dereference_protected(ntbl->htbl, - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); if (!htbl) goto out_unlock; @@ -1141,16 +1129,14 @@ void ipoib_del_neighs_by_gid(struct net_device *dev, u8 *gid) struct ipoib_neigh __rcu **np = &htbl->buckets[i]; while ((neigh = rcu_dereference_protected(*np, - lockdep_is_held(&ntbl->rwlock))) != NULL) { + lockdep_is_held(&priv->lock))) != NULL) { /* delete neighs belong to this parent */ if (!memcmp(gid, neigh->daddr + 4, sizeof (union ib_gid))) { rcu_assign_pointer(*np, rcu_dereference_protected(neigh->hnext, - lockdep_is_held(&ntbl->rwlock))); + lockdep_is_held(&priv->lock))); /* remove from parent list */ - spin_lock_irqsave(&priv->lock, flags); list_del(&neigh->list); - spin_unlock_irqrestore(&priv->lock, flags); call_rcu(&neigh->rcu, ipoib_neigh_reclaim); } else { np = &neigh->hnext; @@ -1159,7 +1145,7 @@ void ipoib_del_neighs_by_gid(struct net_device *dev, u8 *gid) } } out_unlock: - write_unlock_bh(&ntbl->rwlock); + spin_unlock_irqrestore(&priv->lock, flags); } static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) @@ -1171,10 +1157,10 @@ static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) init_completion(&priv->ntbl.flushed); - write_lock_bh(&ntbl->rwlock); + spin_lock_irqsave(&priv->lock, flags); htbl = rcu_dereference_protected(ntbl->htbl, - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); if (!htbl) goto out_unlock; @@ -1187,14 +1173,12 @@ static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) struct ipoib_neigh __rcu **np = &htbl->buckets[i]; while ((neigh = rcu_dereference_protected(*np, - lockdep_is_held(&ntbl->rwlock))) != NULL) { + lockdep_is_held(&priv->lock))) != NULL) { rcu_assign_pointer(*np, rcu_dereference_protected(neigh->hnext, - lockdep_is_held(&ntbl->rwlock))); + lockdep_is_held(&priv->lock))); /* remove from path/mc list */ - spin_lock_irqsave(&priv->lock, flags); list_del(&neigh->list); - spin_unlock_irqrestore(&priv->lock, flags); call_rcu(&neigh->rcu, ipoib_neigh_reclaim); } } @@ -1204,7 +1188,7 @@ free_htbl: call_rcu(&htbl->rcu, neigh_hash_free_rcu); out_unlock: - write_unlock_bh(&ntbl->rwlock); + spin_unlock_irqrestore(&priv->lock, flags); if (wait_flushed) wait_for_completion(&priv->ntbl.flushed); } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 13f4aa7593c8..75367249f447 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -707,9 +707,7 @@ out: neigh = ipoib_neigh_get(dev, daddr); spin_lock_irqsave(&priv->lock, flags); if (!neigh) { - spin_unlock_irqrestore(&priv->lock, flags); neigh = ipoib_neigh_alloc(daddr, dev); - spin_lock_irqsave(&priv->lock, flags); if (neigh) { kref_get(&mcast->ah->ref); neigh->ah = mcast->ah; -- cgit v1.2.3 From 022e1d0680c7b4366017393417b8758be5abcee8 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 11 Sep 2012 11:11:13 -0500 Subject: rtlwifi: rtl8192ce: Log message that B_CUT device may not work There are a number of problems that occur for the latest version of the Realtek RTL8188CE device with the in-kernel driver. These include selection of the wrong firmware, and system lockup. A full fix is known, but is too invasive for inclusion in stable. This patch fixes the problem with loading the wrong firmware, and logs a message that the device may not work for kernels 3.6 and older. Signed-off-by: Larry Finger Cc: Stable Cc: Anisse Astier Cc: Li Chaoming Tested-by: Anisse Astier Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192ce/def.h | 1 + drivers/net/wireless/rtlwifi/rtl8192ce/hw.c | 12 ++++++++++-- drivers/net/wireless/rtlwifi/rtl8192ce/sw.c | 6 ++++-- 3 files changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h index 04c3aef8a4f6..2925094b2d91 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h @@ -117,6 +117,7 @@ #define CHIP_VER_B BIT(4) #define CHIP_92C_BITMASK BIT(0) +#define CHIP_UNKNOWN BIT(7) #define CHIP_92C_1T2R 0x03 #define CHIP_92C 0x01 #define CHIP_88C 0x00 diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c index bd0da7ef290b..dd4bb0950a57 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c @@ -994,8 +994,16 @@ static enum version_8192c _rtl92ce_read_chip_version(struct ieee80211_hw *hw) version = (value32 & TYPE_ID) ? VERSION_A_CHIP_92C : VERSION_A_CHIP_88C; } else { - version = (value32 & TYPE_ID) ? VERSION_B_CHIP_92C : - VERSION_B_CHIP_88C; + version = (enum version_8192c) (CHIP_VER_B | + ((value32 & TYPE_ID) ? CHIP_92C_BITMASK : 0) | + ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0)); + if ((!IS_CHIP_VENDOR_UMC(version)) && (value32 & + CHIP_VER_RTL_MASK)) { + version = (enum version_8192c)(version | + ((((value32 & CHIP_VER_RTL_MASK) == BIT(12)) + ? CHIP_VENDOR_UMC_B_CUT : CHIP_UNKNOWN) | + CHIP_VENDOR_UMC)); + } } switch (version) { diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c index 3aa927f8b9b9..7d8f96405f42 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c @@ -162,10 +162,12 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw) /* request fw */ if (IS_VENDOR_UMC_A_CUT(rtlhal->version) && - !IS_92C_SERIAL(rtlhal->version)) + !IS_92C_SERIAL(rtlhal->version)) { rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cfwU.bin"; - else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) + } else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) { rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cfwU_B.bin"; + pr_info("****** This B_CUT device may not work with kernels 3.6 and earlier\n"); + } rtlpriv->max_fw_size = 0x4000; pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name); -- cgit v1.2.3 From ed205b361956c96e0d8c09a8c9135a6a79cd9541 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Tue, 11 Sep 2012 21:16:47 +0200 Subject: brcmfmac: fix big endian bug in i-scan. ssid len is 32 bit and needs endian conversion for big endian systems. Cc: stable Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index c36e92312443..50b5553b6964 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -500,8 +500,10 @@ static void wl_iscan_prep(struct brcmf_scan_params_le *params_le, params_le->active_time = cpu_to_le32(-1); params_le->passive_time = cpu_to_le32(-1); params_le->home_time = cpu_to_le32(-1); - if (ssid && ssid->SSID_len) - memcpy(¶ms_le->ssid_le, ssid, sizeof(struct brcmf_ssid)); + if (ssid && ssid->SSID_len) { + params_le->ssid_le.SSID_len = cpu_to_le32(ssid->SSID_len); + memcpy(¶ms_le->ssid_le.SSID, ssid->SSID, ssid->SSID_len); + } } static s32 -- cgit v1.2.3 From e020a83d0942a5aceac35986500c9834efc8707d Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Tue, 11 Sep 2012 21:16:48 +0200 Subject: brcmfmac: Fix big endian host configuration data. Fixes big endian host configuration parameters. Cc: stable Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/dhd_common.c | 26 +++++++++++++--------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c index 2621dd3d7dcd..6f70953f0bad 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c @@ -764,8 +764,11 @@ static void brcmf_c_arp_offload_set(struct brcmf_pub *drvr, int arp_mode) { char iovbuf[32]; int retcode; + __le32 arp_mode_le; - brcmf_c_mkiovar("arp_ol", (char *)&arp_mode, 4, iovbuf, sizeof(iovbuf)); + arp_mode_le = cpu_to_le32(arp_mode); + brcmf_c_mkiovar("arp_ol", (char *)&arp_mode_le, 4, iovbuf, + sizeof(iovbuf)); retcode = brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, sizeof(iovbuf)); retcode = retcode >= 0 ? 0 : retcode; @@ -781,8 +784,11 @@ static void brcmf_c_arp_offload_enable(struct brcmf_pub *drvr, int arp_enable) { char iovbuf[32]; int retcode; + __le32 arp_enable_le; - brcmf_c_mkiovar("arpoe", (char *)&arp_enable, 4, + arp_enable_le = cpu_to_le32(arp_enable); + + brcmf_c_mkiovar("arpoe", (char *)&arp_enable_le, 4, iovbuf, sizeof(iovbuf)); retcode = brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, sizeof(iovbuf)); @@ -800,10 +806,10 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr) char iovbuf[BRCMF_EVENTING_MASK_LEN + 12]; /* Room for "event_msgs" + '\0' + bitvec */ char buf[128], *ptr; - u32 roaming = 1; - uint bcn_timeout = 3; - int scan_assoc_time = 40; - int scan_unassoc_time = 40; + __le32 roaming_le = cpu_to_le32(1); + __le32 bcn_timeout_le = cpu_to_le32(3); + __le32 scan_assoc_time_le = cpu_to_le32(40); + __le32 scan_unassoc_time_le = cpu_to_le32(40); int i; struct brcmf_bus_dcmd *cmdlst; struct list_head *cur, *q; @@ -829,14 +835,14 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr) /* Setup timeout if Beacons are lost and roam is off to report link down */ - brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout, 4, iovbuf, + brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout_le, 4, iovbuf, sizeof(iovbuf)); brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, sizeof(iovbuf)); /* Enable/Disable build-in roaming to allowed ext supplicant to take of romaing */ - brcmf_c_mkiovar("roam_off", (char *)&roaming, 4, + brcmf_c_mkiovar("roam_off", (char *)&roaming_le, 4, iovbuf, sizeof(iovbuf)); brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, sizeof(iovbuf)); @@ -848,9 +854,9 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr) sizeof(iovbuf)); brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_SCAN_CHANNEL_TIME, - (char *)&scan_assoc_time, sizeof(scan_assoc_time)); + (char *)&scan_assoc_time_le, sizeof(scan_assoc_time_le)); brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_SCAN_UNASSOC_TIME, - (char *)&scan_unassoc_time, sizeof(scan_unassoc_time)); + (char *)&scan_unassoc_time_le, sizeof(scan_unassoc_time_le)); /* Set and enable ARP offload feature */ brcmf_c_arp_offload_set(drvr, BRCMF_ARPOL_MODE); -- cgit v1.2.3 From 1a131458ddf24d3dddb355ce00f32365557c1eed Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 5 Sep 2012 22:00:38 +0530 Subject: mtip32xx: Add support for new devices Added supported device IDs in pci table Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 8 +++++++- drivers/block/mtip32xx/mtip32xx.h | 8 +++++++- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index a8fddeb3d638..a935f4f7a53a 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -4168,7 +4168,13 @@ static void mtip_pci_shutdown(struct pci_dev *pdev) /* Table of device ids supported by this driver. */ static DEFINE_PCI_DEVICE_TABLE(mtip_pci_tbl) = { - { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320H_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320M_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320S_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P325M_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420H_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420M_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P425M_DEVICE_ID) }, { 0 } }; diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index f51fc23d17bb..0255d19a17fa 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -76,7 +76,13 @@ /* Micron Vendor ID & P320x SSD Device ID */ #define PCI_VENDOR_ID_MICRON 0x1344 -#define P320_DEVICE_ID 0x5150 +#define P320H_DEVICE_ID 0x5150 +#define P320M_DEVICE_ID 0x5151 +#define P320S_DEVICE_ID 0x5152 +#define P325M_DEVICE_ID 0x5153 +#define P420H_DEVICE_ID 0x5160 +#define P420M_DEVICE_ID 0x5161 +#define P425M_DEVICE_ID 0x5163 /* Driver name and version strings */ #define MTIP_DRV_NAME "mtip32xx" -- cgit v1.2.3 From 12a166c919310f4c967d0959b4ed073cced850d7 Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 5 Sep 2012 22:01:36 +0530 Subject: mtip32xx: Handle NCQ commands during the security locked state Return error for NCQ commands when the drive is in security locked state Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 10 +++++++++- drivers/block/mtip32xx/mtip32xx.h | 2 ++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index a935f4f7a53a..2553c7353115 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -1148,11 +1148,15 @@ static bool mtip_pause_ncq(struct mtip_port *port, reply = port->rxfis + RX_FIS_D2H_REG; task_file_data = readl(port->mmio+PORT_TFDATA); - if ((task_file_data & 1) || (fis->command == ATA_CMD_SEC_ERASE_UNIT)) + if (fis->command == ATA_CMD_SEC_ERASE_UNIT) + clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); + + if ((task_file_data & 1)) return false; if (fis->command == ATA_CMD_SEC_ERASE_PREP) { set_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); + set_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); port->ic_pause_timer = jiffies; return true; } else if ((fis->command == ATA_CMD_DOWNLOAD_MICRO) && @@ -3619,6 +3623,10 @@ static void mtip_make_request(struct request_queue *queue, struct bio *bio) bio_endio(bio, -ENODATA); return; } + if (unlikely(test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag))) { + bio_endio(bio, -ENODATA); + return; + } } if (unlikely(!bio_has_data(bio))) { diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index 0255d19a17fa..18627a1d04c5 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -137,10 +137,12 @@ enum { MTIP_PF_SVC_THD_STOP_BIT = 8, /* below are bit numbers in 'dd_flag' defined in driver_data */ + MTIP_DDF_SEC_LOCK_BIT = 0, MTIP_DDF_REMOVE_PENDING_BIT = 1, MTIP_DDF_OVER_TEMP_BIT = 2, MTIP_DDF_WRITE_PROTECT_BIT = 3, MTIP_DDF_STOP_IO = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) | \ + (1 << MTIP_DDF_SEC_LOCK_BIT) | \ (1 << MTIP_DDF_OVER_TEMP_BIT) | \ (1 << MTIP_DDF_WRITE_PROTECT_BIT)), -- cgit v1.2.3 From d7c8b945480b3505708c47aad2bca20bd20de2bd Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 5 Sep 2012 22:02:16 +0530 Subject: mtip32xx: Increase timeout for standby command Increased timeout for standby command to work with larger capacity drives Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 2553c7353115..cf557a457cc0 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -2047,7 +2047,7 @@ static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout) *timeout = 240000; /* 4 minutes */ break; case ATA_CMD_STANDBYNOW1: - *timeout = 10000; /* 10 seconds */ + *timeout = 120000; /* 2 minutes */ break; case 0xF7: case 0xFA: -- cgit v1.2.3 From b62868e50e65e59556b550f745dac9a9a51ff841 Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 5 Sep 2012 22:03:32 +0530 Subject: mtip32xx: Proper reporting of write protect status on big-endian Proper reporting of write protect status on big-endian Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index cf557a457cc0..06bc273ba289 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -3218,8 +3218,8 @@ static int mtip_hw_init(struct driver_data *dd) "Unable to check write protect progress\n"); else dev_info(&dd->pdev->dev, - "Write protect progress: %d%% (%d blocks)\n", - attr242.cur, attr242.data); + "Write protect progress: %u%% (%u blocks)\n", + attr242.cur, le32_to_cpu(attr242.data)); return rv; out3: -- cgit v1.2.3 From 45422e7431f3afa049d07a99a35de8f8ceea6b3c Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 5 Sep 2012 22:03:56 +0530 Subject: mtip32xx: Change printk to pr_xxxx Changed printk to be compliant with latest style changes Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 06bc273ba289..362ce4a68582 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -4213,12 +4213,12 @@ static int __init mtip_init(void) { int error; - printk(KERN_INFO MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n"); + pr_info(MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n"); /* Allocate a major block device number to use with this driver. */ error = register_blkdev(0, MTIP_DRV_NAME); if (error <= 0) { - printk(KERN_ERR "Unable to register block device (%d)\n", + pr_err("Unable to register block device (%d)\n", error); return -EBUSY; } @@ -4227,7 +4227,7 @@ static int __init mtip_init(void) if (!dfs_parent) { dfs_parent = debugfs_create_dir("rssd", NULL); if (IS_ERR_OR_NULL(dfs_parent)) { - printk(KERN_WARNING "Error creating debugfs parent\n"); + pr_warn("Error creating debugfs parent\n"); dfs_parent = NULL; } } -- cgit v1.2.3 From ac64e6572d3906c3874175cf5345a37dc7f983f5 Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 5 Sep 2012 22:04:16 +0530 Subject: mtip32xx: Remove dead code Removed the dead code in mtip_hw_read_registers() and mtip_hw_read_flags(). Reported-by: Coverity Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 362ce4a68582..e6519e2c9934 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -2592,9 +2592,6 @@ static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf, if (!len || size) return 0; - if (size < 0) - return -EINVAL; - size += sprintf(&buf[size], "H/ S ACTive : [ 0x"); for (n = dd->slot_groups-1; n >= 0; n--) @@ -2664,9 +2661,6 @@ static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf, if (!len || size) return 0; - if (size < 0) - return -EINVAL; - size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n", dd->port->flags); size += sprintf(&buf[size], "Flag-dd : [ %08lX ]\n", -- cgit v1.2.3 From 97651ea687d3b6a214c32b49f79523db709fba18 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Wed, 12 Sep 2012 14:06:12 -0500 Subject: mtip32xx: fix user_buffer check in exec_drive_command Current user_buffer check is incorrect and causes hdparm to fail # hdparm -I /dev/rssda HDIO_DRIVE_CMD(identify) failed: Input/output error /dev/rssda: Patching linux-3.6-rc5 hdparm works as expected # hdparm -I /dev/rssda /dev/rssda: ATA device, with non-removable media Model Number: DELL_P320h-MTFDGAL350SAH Serial Number: 00000000121302025F01 Firmware Revision: B1442808 Reported-by: Tomas Henzl Signed-off-by: David Milburn Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index e6519e2c9934..f946d31d6917 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -1904,7 +1904,7 @@ static int exec_drive_command(struct mtip_port *port, u8 *command, int rv = 0, xfer_sz = command[3]; if (xfer_sz) { - if (user_buffer) + if (!user_buffer) return -EFAULT; buf = dmam_alloc_coherent(&port->dd->pdev->dev, -- cgit v1.2.3 From 64f1e00d8edb54f5d25fb0114a46050fb8340df4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 13 Sep 2012 15:28:56 +0200 Subject: ALSA: hda - Yet another position_fix quirk for ASUS machines ASUS X53S also suffers from the same issue as in commit c302d6133. Use POS_FIX_POSBUF for this hardware, too. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47461 Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 228cdf93fa29..c4763c52eaf6 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2701,6 +2701,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = { SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB), + SND_PCI_QUIRK(0x1043, 0x1ac3, "ASUS X53S", POS_FIX_POSBUF), SND_PCI_QUIRK(0x1043, 0x1b43, "ASUS K53E", POS_FIX_POSBUF), SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB), SND_PCI_QUIRK(0x10de, 0xcb89, "Macbook Pro 7,1", POS_FIX_LPIB), -- cgit v1.2.3 From 35534b201c9f115c68962c095b5a9aad204d025f Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Wed, 29 Aug 2012 15:01:22 +0200 Subject: perf/x86: Export Sandy Bridge uncore clockticks event in sysfs This patch exports the clockticks event and its encoding to user level. The clockticks event was exported for Nehalem/Westmere but not for Sandy Bridge (client). Given that it uses a special encoding, it needs to be exported to user tools, so users can do: # perf stat -a -C 0 -e uncore_cbox_0/clockticks/ sleep 1 Signed-off-by: Stephane Eranian Acked-by: Yan, Zheng Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120829130122.GA32336@quad Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel_uncore.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 0a5571080e74..38e4894165b9 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -661,6 +661,11 @@ static void snb_uncore_msr_init_box(struct intel_uncore_box *box) } } +static struct uncore_event_desc snb_uncore_events[] = { + INTEL_UNCORE_EVENT_DESC(clockticks, "event=0xff,umask=0x00"), + { /* end: all zeroes */ }, +}; + static struct attribute *snb_uncore_formats_attr[] = { &format_attr_event.attr, &format_attr_umask.attr, @@ -704,6 +709,7 @@ static struct intel_uncore_type snb_uncore_cbox = { .constraints = snb_uncore_cbox_constraints, .ops = &snb_uncore_msr_ops, .format_group = &snb_uncore_format_group, + .event_descs = snb_uncore_events, }; static struct intel_uncore_type *snb_msr_uncores[] = { -- cgit v1.2.3 From bad9ac2d7f878a31cf1ae8c1ee3768077d222bcb Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 25 Jul 2012 19:12:45 +0200 Subject: perf/x86/ibs: Check syscall attribute flags Current implementation simply ignores attribute flags. Thus, there is no notification to userland of unsupported features. Check syscall's attribute flags to let userland know if a feature is supported by the kernel. This is also needed to distinguish between future kernels what might support a feature. Cc: v3.5.. Signed-off-by: Robert Richter Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120910093018.GO8285@erda.amd.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_amd_ibs.c | 12 ++++++++++++ include/linux/perf_event.h | 2 ++ 2 files changed, 14 insertions(+) diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c index 7bfb5bec8630..eebd5ffe1bba 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -209,6 +209,15 @@ static int perf_ibs_precise_event(struct perf_event *event, u64 *config) return -EOPNOTSUPP; } +static const struct perf_event_attr ibs_notsupp = { + .exclude_user = 1, + .exclude_kernel = 1, + .exclude_hv = 1, + .exclude_idle = 1, + .exclude_host = 1, + .exclude_guest = 1, +}; + static int perf_ibs_init(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; @@ -229,6 +238,9 @@ static int perf_ibs_init(struct perf_event *event) if (event->pmu != &perf_ibs->pmu) return -ENOENT; + if (perf_flags(&event->attr) & perf_flags(&ibs_notsupp)) + return -EINVAL; + if (config & ~perf_ibs->config_mask) return -EINVAL; diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 33ed9d605f91..bdb41612bfec 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -274,6 +274,8 @@ struct perf_event_attr { __u64 branch_sample_type; /* enum branch_sample_type */ }; +#define perf_flags(attr) (*(&(attr)->read_format + 1)) + /* * Ioctls that can be done on a perf event fd: */ -- cgit v1.2.3 From 73e8f3d7e2cb23614d5115703d76d8e54764b641 Mon Sep 17 00:00:00 2001 From: T Makphaibulchoke Date: Tue, 28 Aug 2012 21:21:43 -0600 Subject: x86/mm/init.c: Fix devmem_is_allowed() off by one Fixing an off-by-one error in devmem_is_allowed(), which allows accesses to physical addresses 0x100000-0x100fff, an extra page past 1MB. Signed-off-by: T Makphaibulchoke Acked-by: H. Peter Anvin Cc: yinghai@kernel.org Cc: tiwai@suse.de Cc: dhowells@redhat.com Link: http://lkml.kernel.org/r/1346210503-14276-1-git-send-email-tmac@hp.com Signed-off-by: Ingo Molnar --- arch/x86/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index e0e6990723e9..ab1f6a93b527 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -319,7 +319,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, */ int devmem_is_allowed(unsigned long pagenr) { - if (pagenr <= 256) + if (pagenr < 256) return 1; if (iomem_is_exclusive(pagenr << PAGE_SHIFT)) return 0; -- cgit v1.2.3 From ec145babe754f9ea1079034a108104b6001e001c Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 11 Sep 2012 19:26:03 -0400 Subject: time: Fix timeekeping_get_ns overflow on 32bit systems Daniel Lezcano reported seeing multi-second stalls from keyboard input on his T61 laptop when NOHZ and CPU_IDLE were enabled on a 32bit kernel. He bisected the problem down to commit 1e75fa8be9fb6 ("time: Condense timekeeper.xtime into xtime_sec"). After reproducing this issue, I narrowed the problem down to the fact that timekeeping_get_ns() returns a 64bit nsec value that hasn't been accumulated. In some cases this value was being then stored in timespec.tv_nsec (which is a long). On 32bit systems, with idle times larger then 4 seconds (or less, depending on the value of xtime_nsec), the returned nsec value would overflow 32bits. This limited kept time from increasing, causing timers to not expire. The fix is to make sure we don't directly store the result of timekeeping_get_ns() into a tv_nsec field, instead using a 64bit nsec value which can then be added into the timespec via timespec_add_ns(). Reported-and-bisected-by: Daniel Lezcano Tested-by: Daniel Lezcano Signed-off-by: John Stultz Acked-by: Prarit Bhargava Cc: Richard Cochran Link: http://lkml.kernel.org/r/1347405963-35715-1-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar --- kernel/time/timekeeping.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 34e5eac81424..d3b91e75cecd 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -303,10 +303,11 @@ void getnstimeofday(struct timespec *ts) seq = read_seqbegin(&tk->lock); ts->tv_sec = tk->xtime_sec; - ts->tv_nsec = timekeeping_get_ns(tk); + nsecs = timekeeping_get_ns(tk); } while (read_seqretry(&tk->lock, seq)); + ts->tv_nsec = 0; timespec_add_ns(ts, nsecs); } EXPORT_SYMBOL(getnstimeofday); @@ -345,6 +346,7 @@ void ktime_get_ts(struct timespec *ts) { struct timekeeper *tk = &timekeeper; struct timespec tomono; + s64 nsec; unsigned int seq; WARN_ON(timekeeping_suspended); @@ -352,13 +354,14 @@ void ktime_get_ts(struct timespec *ts) do { seq = read_seqbegin(&tk->lock); ts->tv_sec = tk->xtime_sec; - ts->tv_nsec = timekeeping_get_ns(tk); + nsec = timekeeping_get_ns(tk); tomono = tk->wall_to_monotonic; } while (read_seqretry(&tk->lock, seq)); - set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec, - ts->tv_nsec + tomono.tv_nsec); + ts->tv_sec += tomono.tv_sec; + ts->tv_nsec = 0; + timespec_add_ns(ts, nsec + tomono.tv_nsec); } EXPORT_SYMBOL_GPL(ktime_get_ts); @@ -1244,6 +1247,7 @@ void get_monotonic_boottime(struct timespec *ts) { struct timekeeper *tk = &timekeeper; struct timespec tomono, sleep; + s64 nsec; unsigned int seq; WARN_ON(timekeeping_suspended); @@ -1251,14 +1255,15 @@ void get_monotonic_boottime(struct timespec *ts) do { seq = read_seqbegin(&tk->lock); ts->tv_sec = tk->xtime_sec; - ts->tv_nsec = timekeeping_get_ns(tk); + nsec = timekeeping_get_ns(tk); tomono = tk->wall_to_monotonic; sleep = tk->total_sleep_time; } while (read_seqretry(&tk->lock, seq)); - set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec + sleep.tv_sec, - ts->tv_nsec + tomono.tv_nsec + sleep.tv_nsec); + ts->tv_sec += tomono.tv_sec + sleep.tv_sec; + ts->tv_nsec = 0; + timespec_add_ns(ts, nsec + tomono.tv_nsec + sleep.tv_nsec); } EXPORT_SYMBOL_GPL(get_monotonic_boottime); -- cgit v1.2.3 From 8f7412a792bc989d1bddd3c802282eec09456d57 Mon Sep 17 00:00:00 2001 From: Rafael J. Wysocki Date: Fri, 14 Sep 2012 00:26:24 +0200 Subject: ACPI / PM: Infer parent power state from child if unknown, v2 It turns out that there are ACPI BIOSes defining device objects with _PSx and without either _PSC or _PRx. For devices corresponding to those ACPI objetcs __acpi_bus_get_power() returns ACPI_STATE_UNKNOWN and their initial power states are regarded as unknown as a result. If such a device is a parent of another power-manageable device, the child cannot be put into a low-power state through ACPI, because __acpi_bus_set_power() refuses to change power states of devices whose parents' power states are unknown. To work around this problem, observe that the ACPI power state of a device cannot be higher-power (lower-number) than the power state of its parent. Thus, if the device's _PSC method or the configuration of its power resources indicates that the device is in D0, the device's parent has to be in D0 as well. Consequently, if the parent's power state is unknown when we've just learned that its child's power state is D0, we can safely set the parent's power.state field to ACPI_STATE_D0. Tested-by: Aaron Lu Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki --- drivers/acpi/bus.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 9628652e080c..e0596954290b 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -237,6 +237,16 @@ static int __acpi_bus_get_power(struct acpi_device *device, int *state) } else if (result == ACPI_STATE_D3_HOT) { result = ACPI_STATE_D3; } + + /* + * If we were unsure about the device parent's power state up to this + * point, the fact that the device is in D0 implies that the parent has + * to be in D0 too. + */ + if (device->parent && device->parent->power.state == ACPI_STATE_UNKNOWN + && result == ACPI_STATE_D0) + device->parent->power.state = ACPI_STATE_D0; + *state = result; out: -- cgit v1.2.3 From 40bf66ec9791f1452b90b82aadc3b6e6aee201f5 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Fri, 14 Sep 2012 00:26:33 +0200 Subject: ACPI / PM: Fix resource_lock dead lock in acpi_power_on_device Commit 0090def("ACPI: Add interface to register/unregister device to/from power resources") used resource_lock to protect the devices list that relies on power resource. It caused a mutex dead lock, as below acpi_power_on ---> lock resource_lock __acpi_power_on acpi_power_on_device acpi_power_get_inferred_state acpi_power_get_list_state ---> lock resource_lock This patch adds a new mutex "devices_lock" to protect the devices list and calls acpi_power_on_device in acpi_power_on, instead of __acpi_power_on, after the resource_lock is released. [rjw: Changed data type of a boolean variable to bool.] Signed-off-by: Lin Ming Signed-off-by: Aaron Lu Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki --- drivers/acpi/power.c | 34 +++++++++++++++++++++++----------- 1 file changed, 23 insertions(+), 11 deletions(-) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index fc1803414629..cc2a2dcff336 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -107,6 +107,7 @@ struct acpi_power_resource { /* List of devices relying on this power resource */ struct acpi_power_resource_device *devices; + struct mutex devices_lock; }; static struct list_head acpi_power_resource_list; @@ -225,7 +226,6 @@ static void acpi_power_on_device(struct acpi_power_managed_device *device) static int __acpi_power_on(struct acpi_power_resource *resource) { - struct acpi_power_resource_device *device_list = resource->devices; acpi_status status = AE_OK; status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL); @@ -238,19 +238,15 @@ static int __acpi_power_on(struct acpi_power_resource *resource) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n", resource->name)); - while (device_list) { - acpi_power_on_device(device_list->device); - - device_list = device_list->next; - } - return 0; } static int acpi_power_on(acpi_handle handle) { int result = 0; + bool resume_device = false; struct acpi_power_resource *resource = NULL; + struct acpi_power_resource_device *device_list; result = acpi_power_get_context(handle, &resource); if (result) @@ -266,10 +262,25 @@ static int acpi_power_on(acpi_handle handle) result = __acpi_power_on(resource); if (result) resource->ref_count--; + else + resume_device = true; } mutex_unlock(&resource->resource_lock); + if (!resume_device) + return result; + + mutex_lock(&resource->devices_lock); + + device_list = resource->devices; + while (device_list) { + acpi_power_on_device(device_list->device); + device_list = device_list->next; + } + + mutex_unlock(&resource->devices_lock); + return result; } @@ -355,7 +366,7 @@ static void __acpi_power_resource_unregister_device(struct device *dev, if (acpi_power_get_context(res_handle, &resource)) return; - mutex_lock(&resource->resource_lock); + mutex_lock(&resource->devices_lock); prev = NULL; curr = resource->devices; while (curr) { @@ -372,7 +383,7 @@ static void __acpi_power_resource_unregister_device(struct device *dev, prev = curr; curr = curr->next; } - mutex_unlock(&resource->resource_lock); + mutex_unlock(&resource->devices_lock); } /* Unlink dev from all power resources in _PR0 */ @@ -414,10 +425,10 @@ static int __acpi_power_resource_register_device( power_resource_device->device = powered_device; - mutex_lock(&resource->resource_lock); + mutex_lock(&resource->devices_lock); power_resource_device->next = resource->devices; resource->devices = power_resource_device; - mutex_unlock(&resource->resource_lock); + mutex_unlock(&resource->devices_lock); return 0; } @@ -721,6 +732,7 @@ static int acpi_power_add(struct acpi_device *device) resource->device = device; mutex_init(&resource->resource_lock); + mutex_init(&resource->devices_lock); strcpy(resource->name, device->pnp.bus_id); strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME); strcpy(acpi_device_class(device), ACPI_POWER_CLASS); -- cgit v1.2.3 From dd03e73481564fe57655d37154f84a0af00cb449 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Wed, 29 Aug 2012 15:14:35 +0000 Subject: mlx4_core: Fix integer overflows so 8TBs of memory registration works This patch adds on the fixes done in commits 89dd86db78e0 ("mlx4_core: Allow large mlx4_buddy bitmaps") and 3de819e6b642 ("mlx4_core: Fix integer overflow issues around MTT table") so that memory registration of up to 8TB (log_num_mtt=31) finally works. It fixes integer overflows in a few mlx4_table_yyy routines in icm.c by using a u64 intermediate variable, and int/uint issues that caused table indexes to become nagive by setting some variables to be u32 instead of int. These problems cause crashes when a user attempted to register > 512GB of RAM. Signed-off-by: Yishai Hadas Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx4/icm.c | 30 ++++++++++++++++++------------ drivers/net/ethernet/mellanox/mlx4/icm.h | 10 +++++----- 2 files changed, 23 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.c b/drivers/net/ethernet/mellanox/mlx4/icm.c index daf417923661..31d02649be41 100644 --- a/drivers/net/ethernet/mellanox/mlx4/icm.c +++ b/drivers/net/ethernet/mellanox/mlx4/icm.c @@ -227,9 +227,10 @@ int mlx4_UNMAP_ICM_AUX(struct mlx4_dev *dev) MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE); } -int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj) +int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj) { - int i = (obj & (table->num_obj - 1)) / (MLX4_TABLE_CHUNK_SIZE / table->obj_size); + u32 i = (obj & (table->num_obj - 1)) / + (MLX4_TABLE_CHUNK_SIZE / table->obj_size); int ret = 0; mutex_lock(&table->mutex); @@ -262,16 +263,18 @@ out: return ret; } -void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj) +void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj) { - int i; + u32 i; + u64 offset; i = (obj & (table->num_obj - 1)) / (MLX4_TABLE_CHUNK_SIZE / table->obj_size); mutex_lock(&table->mutex); if (--table->icm[i]->refcount == 0) { - mlx4_UNMAP_ICM(dev, table->virt + i * MLX4_TABLE_CHUNK_SIZE, + offset = (u64) i * MLX4_TABLE_CHUNK_SIZE; + mlx4_UNMAP_ICM(dev, table->virt + offset, MLX4_TABLE_CHUNK_SIZE / MLX4_ICM_PAGE_SIZE); mlx4_free_icm(dev, table->icm[i], table->coherent); table->icm[i] = NULL; @@ -280,9 +283,11 @@ void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj) mutex_unlock(&table->mutex); } -void *mlx4_table_find(struct mlx4_icm_table *table, int obj, dma_addr_t *dma_handle) +void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj, + dma_addr_t *dma_handle) { - int idx, offset, dma_offset, i; + int offset, dma_offset, i; + u64 idx; struct mlx4_icm_chunk *chunk; struct mlx4_icm *icm; struct page *page = NULL; @@ -292,7 +297,7 @@ void *mlx4_table_find(struct mlx4_icm_table *table, int obj, dma_addr_t *dma_han mutex_lock(&table->mutex); - idx = (obj & (table->num_obj - 1)) * table->obj_size; + idx = (u64) (obj & (table->num_obj - 1)) * table->obj_size; icm = table->icm[idx / MLX4_TABLE_CHUNK_SIZE]; dma_offset = offset = idx % MLX4_TABLE_CHUNK_SIZE; @@ -326,10 +331,11 @@ out: } int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, - int start, int end) + u32 start, u32 end) { int inc = MLX4_TABLE_CHUNK_SIZE / table->obj_size; - int i, err; + int err; + u32 i; for (i = start; i <= end; i += inc) { err = mlx4_table_get(dev, table, i); @@ -349,9 +355,9 @@ fail: } void mlx4_table_put_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, - int start, int end) + u32 start, u32 end) { - int i; + u32 i; for (i = start; i <= end; i += MLX4_TABLE_CHUNK_SIZE / table->obj_size) mlx4_table_put(dev, table, i); diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.h b/drivers/net/ethernet/mellanox/mlx4/icm.h index a67744f53506..dee67fa39107 100644 --- a/drivers/net/ethernet/mellanox/mlx4/icm.h +++ b/drivers/net/ethernet/mellanox/mlx4/icm.h @@ -71,17 +71,17 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages, gfp_t gfp_mask, int coherent); void mlx4_free_icm(struct mlx4_dev *dev, struct mlx4_icm *icm, int coherent); -int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj); -void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj); +int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj); +void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj); int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, - int start, int end); + u32 start, u32 end); void mlx4_table_put_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, - int start, int end); + u32 start, u32 end); int mlx4_init_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table, u64 virt, int obj_size, u32 nobj, int reserved, int use_lowmem, int use_coherent); void mlx4_cleanup_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table); -void *mlx4_table_find(struct mlx4_icm_table *table, int obj, dma_addr_t *dma_handle); +void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj, dma_addr_t *dma_handle); static inline void mlx4_icm_first(struct mlx4_icm *icm, struct mlx4_icm_iter *iter) -- cgit v1.2.3 From c618a9be0e8c0f36baee2560860a0118a428fb26 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 11 Sep 2012 17:21:44 +0200 Subject: dmaengine: at_hdmac: fix comment in atc_prep_slave_sg() s/dma_memcpy/slave_sg/ and it is sg length that we are talking about. Signed-off-by: Nicolas Ferre Cc: Stable [2.6.31+] Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 3934fcc4e00b..6c09e186e960 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -661,7 +661,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, flags); if (unlikely(!atslave || !sg_len)) { - dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n"); + dev_dbg(chan2dev(chan), "prep_slave_sg: sg length is zero!\n"); return NULL; } -- cgit v1.2.3 From c456797681db814f4f5b36909e8e94047bf53d9c Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 11 Sep 2012 17:21:45 +0200 Subject: dmaengine: at_hdmac: check that each sg data length is non-null Avoid the construction of a malformed DMA request sent to the DMA controller. Log message is for debug only because this condition is unlikely to append and may only trigger at driver development time. Signed-off-by: Nicolas Ferre Cc: Stable [2.6.31+] Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 6c09e186e960..7ab6e26664a7 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -689,6 +689,11 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, mem = sg_dma_address(sg); len = sg_dma_len(sg); + if (unlikely(!len)) { + dev_dbg(chan2dev(chan), + "prep_slave_sg: sg(%d) data length is zero\n", i); + goto err; + } mem_width = 2; if (unlikely(mem & 3 || len & 3)) mem_width = 0; @@ -724,6 +729,11 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, mem = sg_dma_address(sg); len = sg_dma_len(sg); + if (unlikely(!len)) { + dev_dbg(chan2dev(chan), + "prep_slave_sg: sg(%d) data length is zero\n", i); + goto err; + } mem_width = 2; if (unlikely(mem & 3 || len & 3)) mem_width = 0; @@ -757,6 +767,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, err_desc_get: dev_err(chan2dev(chan), "not enough descriptors available\n"); +err: atc_desc_put(atchan, first); return NULL; } -- cgit v1.2.3 From 27e99ade81368e6fdda3212bff9345177cf9e57a Mon Sep 17 00:00:00 2001 From: Wang Sen Date: Mon, 30 Jul 2012 14:25:06 +0800 Subject: [SCSI] scsi: virtio-scsi: Fix address translation failure of HighMem pages used by sg list When using the commands below to write some data to a virtio-scsi LUN of the QEMU guest(32-bit) with 1G physical memory(qemu -m 1024), the qemu will crash. # sudo mkfs.ext4 /dev/sdb (/dev/sdb is the virtio-scsi LUN.) # sudo mount /dev/sdb /mnt # dd if=/dev/zero of=/mnt/file bs=1M count=1024 In current implementation, sg_set_buf is called to add buffers to sg list which is put into the virtqueue eventually. But if there are some HighMem pages in table->sgl you can not get virtual address by sg_virt. So, sg_virt(sg_elem) may return NULL value. This will cause QEMU exit when virtqueue_map_sg is called in QEMU because an invalid GPA is passed by virtqueue. Two solutions are discussed here: http://lkml.indiana.edu/hypermail/linux/kernel/1207.3/00675.html Finally, value assignment approach was adopted because: Value assignment creates a well-formed scatterlist, because the termination marker in source sg_list has been set in blk_rq_map_sg(). The last entry of the source sg_list is just copied to the the last entry in destination list. Note that, for now, virtio_ring does not care about the form of the scatterlist and simply processes the first out_num + in_num consecutive elements of the sg[] array. I have tested the patch on my workstation. QEMU would not crash any more. Cc: # 3.4: 4fe74b1: [SCSI] virtio-scsi: SCSI driver Signed-off-by: Wang Sen Acked-by: Paolo Bonzini Signed-off-by: James Bottomley --- drivers/scsi/virtio_scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index c7030fbee79c..3e79a2f00042 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -331,7 +331,7 @@ static void virtscsi_map_sgl(struct scatterlist *sg, unsigned int *p_idx, int i; for_each_sg(table->sgl, sg_elem, table->nents, i) - sg_set_buf(&sg[idx++], sg_virt(sg_elem), sg_elem->length); + sg[idx++] = *sg_elem; *p_idx = idx; } -- cgit v1.2.3 From 636221b86ce0b3b1238c72bad7172d5227d408ac Mon Sep 17 00:00:00 2001 From: Maciej W. Rozycki Date: Thu, 13 Sep 2012 21:23:25 +0100 Subject: MIPS: Malta: Remove RTC Data Mode bootstrap breakage YAMON requires and enforces the RTC Data Mode (Register B, DM bit) to binary, that is the bit is set every time the board goes through the firmware bootstrap sequence. Likewise its calendar manipulation commands interpret or set the RTC registers unconditionally as binary, never actually checking what the value of the DM bit is, under the (correct) assumption that it has been previously set, to indicate the binary mode. A change to Linux a while ago however introduced a platform-specific tweak that clears that bit and therefore forces the data mode to BCD. This causes clock corruption and misinterpretation that has to be fixed up by user-mode tools in system startup scripts as the initial clock is often incorrect according to the BCD interpretation forced. This change removes the hack; a comment included refers to alarm code, but even if it was broken at one point by requiring the BCD mode, it should have been trivially corrected and even if not, given how rarely the alarm feature is used, that was not really a reasonable justification to break the system clock that is indeed used by virtually everything. And either way the alarm code has been since fixed anyway. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4336/ Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-platform.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c index 4c35301720e7..80562b81f0f2 100644 --- a/arch/mips/mti-malta/malta-platform.c +++ b/arch/mips/mti-malta/malta-platform.c @@ -138,11 +138,6 @@ static int __init malta_add_devices(void) if (err) return err; - /* - * Set RTC to BCD mode to support current alarm code. - */ - CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL); - return 0; } -- cgit v1.2.3 From 985b11fa8064d55d0d5a84e68667434598911bb2 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Fri, 14 Sep 2012 16:09:09 +0800 Subject: ASoC: wm8904: correct the index Signed-off-by: Bo Shen Signed-off-by: Mark Brown --- sound/soc/codecs/wm8904.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 0013afe48e66..dc4262eea4b7 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -100,7 +100,7 @@ static const struct reg_default wm8904_reg_defaults[] = { { 14, 0x0000 }, /* R14 - Power Management 2 */ { 15, 0x0000 }, /* R15 - Power Management 3 */ { 18, 0x0000 }, /* R18 - Power Management 6 */ - { 19, 0x945E }, /* R20 - Clock Rates 0 */ + { 20, 0x945E }, /* R20 - Clock Rates 0 */ { 21, 0x0C05 }, /* R21 - Clock Rates 1 */ { 22, 0x0006 }, /* R22 - Clock Rates 2 */ { 24, 0x0050 }, /* R24 - Audio Interface 0 */ -- cgit v1.2.3 From ae3bca90e94dbc9c906321b33f32de4a42a6cdf4 Mon Sep 17 00:00:00 2001 From: Parav Pandit Date: Fri, 17 Aug 2012 14:45:33 +0000 Subject: RDMA/ocrdma: Fix CQE expansion of unsignaled WQE Fix CQE expansion of unsignaled WQE -- don't expand the CQE when the WQE index of the completed CQE matches with last pending WQE (tail) in the queue. Signed-off-by: Parav Pandit Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index cb5b7f7d4d38..b29a4246ef41 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -2219,7 +2219,6 @@ static bool ocrdma_poll_success_scqe(struct ocrdma_qp *qp, u32 wqe_idx; if (!qp->wqe_wr_id_tbl[tail].signaled) { - expand = true; /* CQE cannot be consumed yet */ *polled = false; /* WC cannot be consumed yet */ } else { ibwc->status = IB_WC_SUCCESS; @@ -2227,10 +2226,11 @@ static bool ocrdma_poll_success_scqe(struct ocrdma_qp *qp, ibwc->qp = &qp->ibqp; ocrdma_update_wc(qp, ibwc, tail); *polled = true; - wqe_idx = le32_to_cpu(cqe->wq.wqeidx) & OCRDMA_CQE_WQEIDX_MASK; - if (tail != wqe_idx) - expand = true; /* Coalesced CQE can't be consumed yet */ } + wqe_idx = le32_to_cpu(cqe->wq.wqeidx) & OCRDMA_CQE_WQEIDX_MASK; + if (tail != wqe_idx) + expand = true; /* Coalesced CQE can't be consumed yet */ + ocrdma_hwq_inc_tail(&qp->sq); return expand; } -- cgit v1.2.3 From 4c3550057b83bde3250b2f105c7f56326fb43044 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Wed, 12 Sep 2012 13:01:29 +0000 Subject: IB/qib: Fix failure of compliance test C14-024#06_LocalPortNum Commit 3236b2d469db ("IB/qib: MADs with misset M_Keys should return failure") introduced a return code assignment that unfortunately introduced an unconditional exit for the routine due to missing braces. This patch adds the braces to correct the original patch. Reviewed-by: Dean Luick Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier --- drivers/infiniband/hw/qib/qib_mad.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/qib/qib_mad.c b/drivers/infiniband/hw/qib/qib_mad.c index 19f1e6c45fb6..ccb119143d20 100644 --- a/drivers/infiniband/hw/qib/qib_mad.c +++ b/drivers/infiniband/hw/qib/qib_mad.c @@ -471,9 +471,10 @@ static int subn_get_portinfo(struct ib_smp *smp, struct ib_device *ibdev, if (port_num != port) { ibp = to_iport(ibdev, port_num); ret = check_mkey(ibp, smp, 0); - if (ret) + if (ret) { ret = IB_MAD_RESULT_FAILURE; goto bail; + } } } -- cgit v1.2.3 From f25b70613c048ceb1df052576fda03321ebf41cf Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Fri, 14 Sep 2012 20:54:44 +0200 Subject: ACPI / PM: Use KERN_DEBUG when no power resources are found commit a606dac368eed5696fb38e16b1394f1d049c09e9 adds support to link devices which have _PRx, if a device does not have _PRx, a warning message will be printed. This commit is for ZPODD on Intel ZPODD capable platforms, on other platforms, it has no problem if there is no power resource for this device, so a warning here is not appropriate, change it to debug. Reported-by: Borislav Petkov Signed-off-by: Aaron Lu Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki --- drivers/acpi/power.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index cc2a2dcff336..40e38a06ba85 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -473,7 +473,7 @@ int acpi_power_resource_register_device(struct device *dev, acpi_handle handle) return ret; no_power_resource: - printk(KERN_WARNING PREFIX "Invalid Power Resource to register!"); + printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!"); return -ENODEV; } EXPORT_SYMBOL_GPL(acpi_power_resource_register_device); -- cgit v1.2.3 From f3a87f1b0c4086a408eda48e4c26e32ff80d3124 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 14 Sep 2012 20:06:30 -0400 Subject: Revert "Btrfs: fix some error codes in btrfs_qgroup_inherit()" This reverts commit 5986802c2fcc754040bb7ed95f30bb16c4a843b7. Both paths are not error paths but regular cases where non-qgroup subvols are involved. Signed-off-by: Chris Mason --- fs/btrfs/qgroup.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 38b42e7bc91d..b65015581744 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -1371,10 +1371,8 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, if (srcid) { srcgroup = find_qgroup_rb(fs_info, srcid); - if (!srcgroup) { - ret = -EINVAL; + if (!srcgroup) goto unlock; - } dstgroup->rfer = srcgroup->rfer - level_size; dstgroup->rfer_cmpr = srcgroup->rfer_cmpr - level_size; srcgroup->excl = level_size; @@ -1383,10 +1381,8 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, qgroup_dirty(fs_info, srcgroup); } - if (!inherit) { - ret = -EINVAL; + if (!inherit) goto unlock; - } i_qgroups = (u64 *)(inherit + 1); for (i = 0; i < inherit->num_qgroups; ++i) { -- cgit v1.2.3 From 8ef997b67f0d779c82e7e533a792c5a6837594cd Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 11 Sep 2012 19:56:23 +0100 Subject: ARM: 7534/1: clk: Make the managed clk functions generically available The managed clk functions are currently only available when the generic clk lookup framework is build. But the managed clk functions are merely wrappers around clk_get and clk_put and do not depend on any specifics of the generic lookup functions and there are still quite a few custom implementations of the clk API. So make the managed functions available whenever the clk API is implemented. The patch also removes the custom implementation of devm_clk_get for the coldfire platform. Signed-off-by: Lars-Peter Clausen Acked-by: Greg Ungerer Signed-off-by: Russell King --- arch/m68k/platform/coldfire/clk.c | 6 ----- drivers/clk/Makefile | 1 + drivers/clk/clk-devres.c | 55 +++++++++++++++++++++++++++++++++++++++ drivers/clk/clkdev.c | 45 -------------------------------- 4 files changed, 56 insertions(+), 51 deletions(-) create mode 100644 drivers/clk/clk-devres.c diff --git a/arch/m68k/platform/coldfire/clk.c b/arch/m68k/platform/coldfire/clk.c index 75f9ee967ea7..9cd13b4ce42b 100644 --- a/arch/m68k/platform/coldfire/clk.c +++ b/arch/m68k/platform/coldfire/clk.c @@ -146,9 +146,3 @@ struct clk_ops clk_ops1 = { }; #endif /* MCFPM_PPMCR1 */ #endif /* MCFPM_PPMCR0 */ - -struct clk *devm_clk_get(struct device *dev, const char *id) -{ - return NULL; -} -EXPORT_SYMBOL(devm_clk_get); diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 5869ea387054..72ce247a0e8d 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -1,4 +1,5 @@ # common clock types +obj-$(CONFIG_HAVE_CLK) += clk-devres.o obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o diff --git a/drivers/clk/clk-devres.c b/drivers/clk/clk-devres.c new file mode 100644 index 000000000000..f1e7a83426cc --- /dev/null +++ b/drivers/clk/clk-devres.c @@ -0,0 +1,55 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +static void devm_clk_release(struct device *dev, void *res) +{ + clk_put(*(struct clk **)res); +} + +struct clk *devm_clk_get(struct device *dev, const char *id) +{ + struct clk **ptr, *clk; + + ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + clk = clk_get(dev, id); + if (!IS_ERR(clk)) { + *ptr = clk; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return clk; +} +EXPORT_SYMBOL(devm_clk_get); + +static int devm_clk_match(struct device *dev, void *res, void *data) +{ + struct clk **c = res; + if (!c || !*c) { + WARN_ON(!c || !*c); + return 0; + } + return *c == data; +} + +void devm_clk_put(struct device *dev, struct clk *clk) +{ + int ret; + + ret = devres_destroy(dev, devm_clk_release, devm_clk_match, clk); + + WARN_ON(ret); +} +EXPORT_SYMBOL(devm_clk_put); diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index d423c9bdd71a..442a31363873 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -171,51 +171,6 @@ void clk_put(struct clk *clk) } EXPORT_SYMBOL(clk_put); -static void devm_clk_release(struct device *dev, void *res) -{ - clk_put(*(struct clk **)res); -} - -struct clk *devm_clk_get(struct device *dev, const char *id) -{ - struct clk **ptr, *clk; - - ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL); - if (!ptr) - return ERR_PTR(-ENOMEM); - - clk = clk_get(dev, id); - if (!IS_ERR(clk)) { - *ptr = clk; - devres_add(dev, ptr); - } else { - devres_free(ptr); - } - - return clk; -} -EXPORT_SYMBOL(devm_clk_get); - -static int devm_clk_match(struct device *dev, void *res, void *data) -{ - struct clk **c = res; - if (!c || !*c) { - WARN_ON(!c || !*c); - return 0; - } - return *c == data; -} - -void devm_clk_put(struct device *dev, struct clk *clk) -{ - int ret; - - ret = devres_destroy(dev, devm_clk_release, devm_clk_match, clk); - - WARN_ON(ret); -} -EXPORT_SYMBOL(devm_clk_put); - void clkdev_add(struct clk_lookup *cl) { mutex_lock(&clocks_mutex); -- cgit v1.2.3 From 0848c94fb4a5cc213a7fb0fb3a5721ad6e16f096 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 11 Sep 2012 15:16:36 +0800 Subject: mfd: core: Push irqdomain mapping out into devices Currently the MFD core supports remapping MFD cell interrupts using an irqdomain but only if the MFD is being instantiated using device tree and only if the device tree bindings use the pattern of registering IPs in the device tree with compatible properties. This will be actively harmful for drivers which support non-DT platforms and use this pattern for their DT bindings as it will mean that the core will silently change remapping behaviour and it is also limiting for drivers which don't do DT with this particular pattern. There is also a potential fragility if there are interrupts not associated with MFD cells and all the cells are omitted from the device tree for some reason. Instead change the code to take an IRQ domain as an optional argument, allowing drivers to take the decision about the parent domain for their interrupts. The one current user of this feature is ab8500-core, it has the domain lookup pushed out into the driver. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/88pm800.c | 5 +++-- drivers/mfd/88pm805.c | 3 ++- drivers/mfd/88pm860x-core.c | 21 +++++++++++---------- drivers/mfd/aat2870-core.c | 2 +- drivers/mfd/ab3100-core.c | 2 +- drivers/mfd/ab8500-core.c | 10 +++++----- drivers/mfd/arizona-core.c | 6 +++--- drivers/mfd/asic3.c | 6 +++--- drivers/mfd/cs5535-mfd.c | 2 +- drivers/mfd/da9052-core.c | 2 +- drivers/mfd/davinci_voicecodec.c | 2 +- drivers/mfd/db8500-prcmu.c | 2 +- drivers/mfd/htc-pasic3.c | 5 +++-- drivers/mfd/intel_msic.c | 4 ++-- drivers/mfd/janz-cmodio.c | 2 +- drivers/mfd/jz4740-adc.c | 3 ++- drivers/mfd/lm3533-core.c | 7 ++++--- drivers/mfd/lpc_ich.c | 4 ++-- drivers/mfd/lpc_sch.c | 6 ++++-- drivers/mfd/max77686.c | 2 +- drivers/mfd/max77693.c | 2 +- drivers/mfd/max8925-core.c | 12 ++++++------ drivers/mfd/max8997.c | 2 +- drivers/mfd/max8998.c | 8 ++++---- drivers/mfd/mc13xxx-core.c | 2 +- drivers/mfd/mfd-core.c | 12 ++++++------ drivers/mfd/palmas.c | 3 ++- drivers/mfd/rc5t583.c | 2 +- drivers/mfd/rdc321x-southbridge.c | 3 ++- drivers/mfd/sec-core.c | 8 ++++---- drivers/mfd/sta2x11-mfd.c | 4 ++-- drivers/mfd/stmpe.c | 2 +- drivers/mfd/t7l66xb.c | 2 +- drivers/mfd/tc3589x.c | 8 ++++---- drivers/mfd/tc6387xb.c | 2 +- drivers/mfd/tc6393xb.c | 4 ++-- drivers/mfd/ti-ssp.c | 2 +- drivers/mfd/timberdale.c | 12 ++++++------ drivers/mfd/tps6105x.c | 2 +- drivers/mfd/tps6507x.c | 2 +- drivers/mfd/tps65090.c | 2 +- drivers/mfd/tps65217.c | 2 +- drivers/mfd/tps6586x.c | 3 ++- drivers/mfd/tps65910.c | 2 +- drivers/mfd/tps65912-core.c | 2 +- drivers/mfd/twl4030-audio.c | 2 +- drivers/mfd/twl6040-core.c | 2 +- drivers/mfd/vx855.c | 2 +- drivers/mfd/wl1273-core.c | 2 +- drivers/mfd/wm831x-core.c | 16 ++++++++-------- drivers/mfd/wm8400-core.c | 2 +- drivers/mfd/wm8994-core.c | 4 ++-- drivers/staging/nvec/nvec.c | 2 +- include/linux/mfd/core.h | 4 +++- 54 files changed, 125 insertions(+), 112 deletions(-) diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c index b67a3018b136..ce229ea933d1 100644 --- a/drivers/mfd/88pm800.c +++ b/drivers/mfd/88pm800.c @@ -470,7 +470,8 @@ static int __devinit device_800_init(struct pm80x_chip *chip, ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0], - ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0); + ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0, + NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add onkey subdev\n"); goto out_dev; @@ -481,7 +482,7 @@ static int __devinit device_800_init(struct pm80x_chip *chip, rtc_devs[0].platform_data = pdata->rtc; rtc_devs[0].pdata_size = sizeof(struct pm80x_rtc_pdata); ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0], - ARRAY_SIZE(rtc_devs), NULL, 0); + ARRAY_SIZE(rtc_devs), NULL, 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add rtc subdev\n"); goto out_dev; diff --git a/drivers/mfd/88pm805.c b/drivers/mfd/88pm805.c index 6146583589f6..c20a31136f04 100644 --- a/drivers/mfd/88pm805.c +++ b/drivers/mfd/88pm805.c @@ -216,7 +216,8 @@ static int __devinit device_805_init(struct pm80x_chip *chip) } ret = mfd_add_devices(chip->dev, 0, &codec_devs[0], - ARRAY_SIZE(codec_devs), &codec_resources[0], 0); + ARRAY_SIZE(codec_devs), &codec_resources[0], 0, + NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add codec subdev\n"); goto out_codec; diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index d09918cf1b15..b73f033b2c60 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -637,7 +637,7 @@ static void __devinit device_bk_init(struct pm860x_chip *chip, bk_devs[i].resources = &bk_resources[j]; ret = mfd_add_devices(chip->dev, 0, &bk_devs[i], 1, - &bk_resources[j], 0); + &bk_resources[j], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add " "backlight subdev\n"); @@ -672,7 +672,7 @@ static void __devinit device_led_init(struct pm860x_chip *chip, led_devs[i].resources = &led_resources[j], ret = mfd_add_devices(chip->dev, 0, &led_devs[i], 1, - &led_resources[j], 0); + &led_resources[j], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add " "led subdev\n"); @@ -709,7 +709,7 @@ static void __devinit device_regulator_init(struct pm860x_chip *chip, regulator_devs[i].resources = ®ulator_resources[seq]; ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[i], 1, - ®ulator_resources[seq], 0); + ®ulator_resources[seq], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add regulator subdev\n"); goto out; @@ -733,7 +733,7 @@ static void __devinit device_rtc_init(struct pm860x_chip *chip, rtc_devs[0].resources = &rtc_resources[0]; ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0], ARRAY_SIZE(rtc_devs), &rtc_resources[0], - chip->irq_base); + chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add rtc subdev\n"); } @@ -752,7 +752,7 @@ static void __devinit device_touch_init(struct pm860x_chip *chip, touch_devs[0].resources = &touch_resources[0]; ret = mfd_add_devices(chip->dev, 0, &touch_devs[0], ARRAY_SIZE(touch_devs), &touch_resources[0], - chip->irq_base); + chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add touch subdev\n"); } @@ -770,7 +770,7 @@ static void __devinit device_power_init(struct pm860x_chip *chip, power_devs[0].num_resources = ARRAY_SIZE(battery_resources); power_devs[0].resources = &battery_resources[0], ret = mfd_add_devices(chip->dev, 0, &power_devs[0], 1, - &battery_resources[0], chip->irq_base); + &battery_resources[0], chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add battery subdev\n"); @@ -779,7 +779,7 @@ static void __devinit device_power_init(struct pm860x_chip *chip, power_devs[1].num_resources = ARRAY_SIZE(charger_resources); power_devs[1].resources = &charger_resources[0], ret = mfd_add_devices(chip->dev, 0, &power_devs[1], 1, - &charger_resources[0], chip->irq_base); + &charger_resources[0], chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add charger subdev\n"); @@ -788,7 +788,7 @@ static void __devinit device_power_init(struct pm860x_chip *chip, power_devs[2].num_resources = ARRAY_SIZE(preg_resources); power_devs[2].resources = &preg_resources[0], ret = mfd_add_devices(chip->dev, 0, &power_devs[2], 1, - &preg_resources[0], chip->irq_base); + &preg_resources[0], chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add preg subdev\n"); } @@ -802,7 +802,7 @@ static void __devinit device_onkey_init(struct pm860x_chip *chip, onkey_devs[0].resources = &onkey_resources[0], ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0], ARRAY_SIZE(onkey_devs), &onkey_resources[0], - chip->irq_base); + chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add onkey subdev\n"); } @@ -815,7 +815,8 @@ static void __devinit device_codec_init(struct pm860x_chip *chip, codec_devs[0].num_resources = ARRAY_SIZE(codec_resources); codec_devs[0].resources = &codec_resources[0], ret = mfd_add_devices(chip->dev, 0, &codec_devs[0], - ARRAY_SIZE(codec_devs), &codec_resources[0], 0); + ARRAY_SIZE(codec_devs), &codec_resources[0], 0, + NULL); if (ret < 0) dev_err(chip->dev, "Failed to add codec subdev\n"); } diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c index 44a3fdbadef4..f1beb4971f87 100644 --- a/drivers/mfd/aat2870-core.c +++ b/drivers/mfd/aat2870-core.c @@ -424,7 +424,7 @@ static int aat2870_i2c_probe(struct i2c_client *client, } ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs, - ARRAY_SIZE(aat2870_devs), NULL, 0); + ARRAY_SIZE(aat2870_devs), NULL, 0, NULL); if (ret != 0) { dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret); goto out_disable; diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c index 78fca2902c8d..01781ae5d0d7 100644 --- a/drivers/mfd/ab3100-core.c +++ b/drivers/mfd/ab3100-core.c @@ -946,7 +946,7 @@ static int __devinit ab3100_probe(struct i2c_client *client, } err = mfd_add_devices(&client->dev, 0, ab3100_devs, - ARRAY_SIZE(ab3100_devs), NULL, 0); + ARRAY_SIZE(ab3100_devs), NULL, 0, NULL); ab3100_setup_debugfs(ab3100); diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 626b4ecaf647..47adf800024e 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1418,25 +1418,25 @@ static int __devinit ab8500_probe(struct platform_device *pdev) ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs, ARRAY_SIZE(abx500_common_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); if (ret) goto out_freeirq; if (is_ab9540(ab8500)) ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, ARRAY_SIZE(ab9540_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); else ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs, ARRAY_SIZE(ab8500_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); if (ret) goto out_freeirq; if (is_ab9540(ab8500) || is_ab8505(ab8500)) ret = mfd_add_devices(ab8500->dev, 0, ab9540_ab8505_devs, ARRAY_SIZE(ab9540_ab8505_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); if (ret) goto out_freeirq; @@ -1444,7 +1444,7 @@ static int __devinit ab8500_probe(struct platform_device *pdev) /* Add battery management devices */ ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs, ARRAY_SIZE(ab8500_bm_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); if (ret) dev_err(ab8500->dev, "error adding bm devices\n"); } diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index c7983e862549..1b48f2094806 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -316,7 +316,7 @@ int __devinit arizona_dev_init(struct arizona *arizona) } ret = mfd_add_devices(arizona->dev, -1, early_devs, - ARRAY_SIZE(early_devs), NULL, 0); + ARRAY_SIZE(early_devs), NULL, 0, NULL); if (ret != 0) { dev_err(dev, "Failed to add early children: %d\n", ret); return ret; @@ -516,11 +516,11 @@ int __devinit arizona_dev_init(struct arizona *arizona) switch (arizona->type) { case WM5102: ret = mfd_add_devices(arizona->dev, -1, wm5102_devs, - ARRAY_SIZE(wm5102_devs), NULL, 0); + ARRAY_SIZE(wm5102_devs), NULL, 0, NULL); break; case WM5110: ret = mfd_add_devices(arizona->dev, -1, wm5110_devs, - ARRAY_SIZE(wm5102_devs), NULL, 0); + ARRAY_SIZE(wm5102_devs), NULL, 0, NULL); break; } diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index 683e18a23329..62f0883a7630 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -913,14 +913,14 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, if (pdata->clock_rate) { ds1wm_pdata.clock_rate = pdata->clock_rate; ret = mfd_add_devices(&pdev->dev, pdev->id, - &asic3_cell_ds1wm, 1, mem, asic->irq_base); + &asic3_cell_ds1wm, 1, mem, asic->irq_base, NULL); if (ret < 0) goto out; } if (mem_sdio && (irq >= 0)) { ret = mfd_add_devices(&pdev->dev, pdev->id, - &asic3_cell_mmc, 1, mem_sdio, irq); + &asic3_cell_mmc, 1, mem_sdio, irq, NULL); if (ret < 0) goto out; } @@ -934,7 +934,7 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, asic3_cell_leds[i].pdata_size = sizeof(pdata->leds[i]); } ret = mfd_add_devices(&pdev->dev, 0, - asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0); + asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0, NULL); } out: diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c index 3419e726de47..2b282133c725 100644 --- a/drivers/mfd/cs5535-mfd.c +++ b/drivers/mfd/cs5535-mfd.c @@ -149,7 +149,7 @@ static int __devinit cs5535_mfd_probe(struct pci_dev *pdev, } err = mfd_add_devices(&pdev->dev, -1, cs5535_mfd_cells, - ARRAY_SIZE(cs5535_mfd_cells), NULL, 0); + ARRAY_SIZE(cs5535_mfd_cells), NULL, 0, NULL); if (err) { dev_err(&pdev->dev, "MFD add devices failed: %d\n", err); goto err_disable; diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c index 2544910e1fd6..a0a62b24621b 100644 --- a/drivers/mfd/da9052-core.c +++ b/drivers/mfd/da9052-core.c @@ -803,7 +803,7 @@ int __devinit da9052_device_init(struct da9052 *da9052, u8 chip_id) dev_err(da9052->dev, "DA9052 ADC IRQ failed ret=%d\n", ret); ret = mfd_add_devices(da9052->dev, -1, da9052_subdev_info, - ARRAY_SIZE(da9052_subdev_info), NULL, 0); + ARRAY_SIZE(da9052_subdev_info), NULL, 0, NULL); if (ret) goto err; diff --git a/drivers/mfd/davinci_voicecodec.c b/drivers/mfd/davinci_voicecodec.c index 4e2af2cb2d26..45e83a68641b 100644 --- a/drivers/mfd/davinci_voicecodec.c +++ b/drivers/mfd/davinci_voicecodec.c @@ -129,7 +129,7 @@ static int __init davinci_vc_probe(struct platform_device *pdev) cell->pdata_size = sizeof(*davinci_vc); ret = mfd_add_devices(&pdev->dev, pdev->id, davinci_vc->cells, - DAVINCI_VC_CELLS, NULL, 0); + DAVINCI_VC_CELLS, NULL, 0, NULL); if (ret != 0) { dev_err(&pdev->dev, "fail to register client devices\n"); goto fail4; diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 7040a0081130..0e63cdd9b52a 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -3010,7 +3010,7 @@ static int __devinit db8500_prcmu_probe(struct platform_device *pdev) prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs, - ARRAY_SIZE(db8500_prcmu_devs), NULL, 0); + ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, NULL); if (err) { pr_err("prcmu: Failed to add subdevices\n"); return err; diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c index 04c7093d6499..9e5453d21a68 100644 --- a/drivers/mfd/htc-pasic3.c +++ b/drivers/mfd/htc-pasic3.c @@ -168,7 +168,7 @@ static int __init pasic3_probe(struct platform_device *pdev) /* the first 5 PASIC3 registers control the DS1WM */ ds1wm_resources[0].end = (5 << asic->bus_shift) - 1; ret = mfd_add_devices(&pdev->dev, pdev->id, - &ds1wm_cell, 1, r, irq); + &ds1wm_cell, 1, r, irq, NULL); if (ret < 0) dev_warn(dev, "failed to register DS1WM\n"); } @@ -176,7 +176,8 @@ static int __init pasic3_probe(struct platform_device *pdev) if (pdata && pdata->led_pdata) { led_cell.platform_data = pdata->led_pdata; led_cell.pdata_size = sizeof(struct pasic3_leds_machinfo); - ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, 0); + ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, + 0, NULL); if (ret < 0) dev_warn(dev, "failed to register LED device\n"); } diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c index 59df5584cb58..266bdc5bd96d 100644 --- a/drivers/mfd/intel_msic.c +++ b/drivers/mfd/intel_msic.c @@ -344,13 +344,13 @@ static int __devinit intel_msic_init_devices(struct intel_msic *msic) continue; ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL, - pdata->irq[i]); + pdata->irq[i], NULL); if (ret) goto fail; } ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs, - ARRAY_SIZE(msic_other_devs), NULL, 0); + ARRAY_SIZE(msic_other_devs), NULL, 0, NULL); if (ret) goto fail; diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c index 2ea99989551a..965c4801df8a 100644 --- a/drivers/mfd/janz-cmodio.c +++ b/drivers/mfd/janz-cmodio.c @@ -147,7 +147,7 @@ static int __devinit cmodio_probe_submodules(struct cmodio_device *priv) } return mfd_add_devices(&pdev->dev, 0, priv->cells, - num_probed, NULL, pdev->irq); + num_probed, NULL, pdev->irq, NULL); } /* diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c index 87662a17dec6..c6b6d7dda517 100644 --- a/drivers/mfd/jz4740-adc.c +++ b/drivers/mfd/jz4740-adc.c @@ -287,7 +287,8 @@ static int __devinit jz4740_adc_probe(struct platform_device *pdev) writeb(0xff, adc->base + JZ_REG_ADC_CTRL); ret = mfd_add_devices(&pdev->dev, 0, jz4740_adc_cells, - ARRAY_SIZE(jz4740_adc_cells), mem_base, irq_base); + ARRAY_SIZE(jz4740_adc_cells), mem_base, + irq_base, NULL); if (ret < 0) goto err_clk_put; diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c index 0b2879b87fd9..24212f45b201 100644 --- a/drivers/mfd/lm3533-core.c +++ b/drivers/mfd/lm3533-core.c @@ -393,7 +393,8 @@ static int __devinit lm3533_device_als_init(struct lm3533 *lm3533) lm3533_als_devs[0].platform_data = pdata->als; lm3533_als_devs[0].pdata_size = sizeof(*pdata->als); - ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL, 0); + ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL, + 0, NULL); if (ret) { dev_err(lm3533->dev, "failed to add ALS device\n"); return ret; @@ -422,7 +423,7 @@ static int __devinit lm3533_device_bl_init(struct lm3533 *lm3533) } ret = mfd_add_devices(lm3533->dev, 0, lm3533_bl_devs, - pdata->num_backlights, NULL, 0); + pdata->num_backlights, NULL, 0, NULL); if (ret) { dev_err(lm3533->dev, "failed to add backlight devices\n"); return ret; @@ -451,7 +452,7 @@ static int __devinit lm3533_device_led_init(struct lm3533 *lm3533) } ret = mfd_add_devices(lm3533->dev, 0, lm3533_led_devs, - pdata->num_leds, NULL, 0); + pdata->num_leds, NULL, 0, NULL); if (ret) { dev_err(lm3533->dev, "failed to add LED devices\n"); return ret; diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index a05fdfc2ebcf..092ad4b44b6d 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -750,7 +750,7 @@ gpe0_done: lpc_ich_finalize_cell(&lpc_ich_cells[LPC_GPIO], id); ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_GPIO], - 1, NULL, 0); + 1, NULL, 0, NULL); gpio_done: if (acpi_conflict) @@ -807,7 +807,7 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, lpc_ich_finalize_cell(&lpc_ich_cells[LPC_WDT], id); ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_WDT], - 1, NULL, 0); + 1, NULL, 0, NULL); wdt_done: return ret; diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c index 9f20abc5e393..f6b9c5c96b24 100644 --- a/drivers/mfd/lpc_sch.c +++ b/drivers/mfd/lpc_sch.c @@ -127,7 +127,8 @@ static int __devinit lpc_sch_probe(struct pci_dev *dev, lpc_sch_cells[i].id = id->device; ret = mfd_add_devices(&dev->dev, 0, - lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, 0); + lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, + 0, NULL); if (ret) goto out_dev; @@ -153,7 +154,8 @@ static int __devinit lpc_sch_probe(struct pci_dev *dev, tunnelcreek_cells[i].id = id->device; ret = mfd_add_devices(&dev->dev, 0, tunnelcreek_cells, - ARRAY_SIZE(tunnelcreek_cells), NULL, 0); + ARRAY_SIZE(tunnelcreek_cells), NULL, + 0, NULL); } return ret; diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index c03e12b51924..d9e24c849a00 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -126,7 +126,7 @@ static int max77686_i2c_probe(struct i2c_client *i2c, max77686_irq_init(max77686); ret = mfd_add_devices(max77686->dev, -1, max77686_devs, - ARRAY_SIZE(max77686_devs), NULL, 0); + ARRAY_SIZE(max77686_devs), NULL, 0, NULL); if (ret < 0) goto err_mfd; diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index a1811cb50ec7..4fdd03d28539 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -159,7 +159,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, pm_runtime_set_active(max77693->dev); ret = mfd_add_devices(max77693->dev, -1, max77693_devs, - ARRAY_SIZE(max77693_devs), NULL, 0); + ARRAY_SIZE(max77693_devs), NULL, 0, NULL); if (ret < 0) goto err_mfd; diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c index 825a7f06d9ba..ee53757beca7 100644 --- a/drivers/mfd/max8925-core.c +++ b/drivers/mfd/max8925-core.c @@ -598,7 +598,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0], ARRAY_SIZE(rtc_devs), - &rtc_resources[0], chip->irq_base); + &rtc_resources[0], chip->irq_base, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add rtc subdev\n"); goto out; @@ -606,7 +606,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0], ARRAY_SIZE(onkey_devs), - &onkey_resources[0], 0); + &onkey_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add onkey subdev\n"); goto out_dev; @@ -615,7 +615,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, if (pdata) { ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[0], ARRAY_SIZE(regulator_devs), - ®ulator_resources[0], 0); + ®ulator_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add regulator subdev\n"); goto out_dev; @@ -625,7 +625,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, if (pdata && pdata->backlight) { ret = mfd_add_devices(chip->dev, 0, &backlight_devs[0], ARRAY_SIZE(backlight_devs), - &backlight_resources[0], 0); + &backlight_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add backlight subdev\n"); goto out_dev; @@ -635,7 +635,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, if (pdata && pdata->power) { ret = mfd_add_devices(chip->dev, 0, &power_devs[0], ARRAY_SIZE(power_devs), - &power_supply_resources[0], 0); + &power_supply_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add power supply " "subdev\n"); @@ -646,7 +646,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, if (pdata && pdata->touch) { ret = mfd_add_devices(chip->dev, 0, &touch_devs[0], ARRAY_SIZE(touch_devs), - &touch_resources[0], 0); + &touch_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add touch subdev\n"); goto out_dev; diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c index 10b629c245b6..f123517065ec 100644 --- a/drivers/mfd/max8997.c +++ b/drivers/mfd/max8997.c @@ -160,7 +160,7 @@ static int max8997_i2c_probe(struct i2c_client *i2c, mfd_add_devices(max8997->dev, -1, max8997_devs, ARRAY_SIZE(max8997_devs), - NULL, 0); + NULL, 0, NULL); /* * TODO: enable others (flash, muic, rtc, battery, ...) and diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c index 6ef56d28c056..d7218cc90945 100644 --- a/drivers/mfd/max8998.c +++ b/drivers/mfd/max8998.c @@ -161,13 +161,13 @@ static int max8998_i2c_probe(struct i2c_client *i2c, switch (id->driver_data) { case TYPE_LP3974: ret = mfd_add_devices(max8998->dev, -1, - lp3974_devs, ARRAY_SIZE(lp3974_devs), - NULL, 0); + lp3974_devs, ARRAY_SIZE(lp3974_devs), + NULL, 0, NULL); break; case TYPE_MAX8998: ret = mfd_add_devices(max8998->dev, -1, - max8998_devs, ARRAY_SIZE(max8998_devs), - NULL, 0); + max8998_devs, ARRAY_SIZE(max8998_devs), + NULL, 0, NULL); break; default: ret = -EINVAL; diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index b801dc72f041..1ec79b54bd2f 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -612,7 +612,7 @@ static int mc13xxx_add_subdevice_pdata(struct mc13xxx *mc13xxx, if (!cell.name) return -ENOMEM; - return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0); + return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0, NULL); } static int mc13xxx_add_subdevice(struct mc13xxx *mc13xxx, const char *format) diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 0c3a01cde2f7..f8b77711ad2d 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -74,12 +74,11 @@ static int mfd_platform_add_cell(struct platform_device *pdev, static int mfd_add_device(struct device *parent, int id, const struct mfd_cell *cell, struct resource *mem_base, - int irq_base) + int irq_base, struct irq_domain *domain) { struct resource *res; struct platform_device *pdev; struct device_node *np = NULL; - struct irq_domain *domain = NULL; int ret = -ENOMEM; int r; @@ -97,7 +96,6 @@ static int mfd_add_device(struct device *parent, int id, for_each_child_of_node(parent->of_node, np) { if (of_device_is_compatible(np, cell->of_compatible)) { pdev->dev.of_node = np; - domain = irq_find_host(parent->of_node); break; } } @@ -177,7 +175,7 @@ fail_alloc: int mfd_add_devices(struct device *parent, int id, struct mfd_cell *cells, int n_devs, struct resource *mem_base, - int irq_base) + int irq_base, struct irq_domain *domain) { int i; int ret = 0; @@ -191,7 +189,8 @@ int mfd_add_devices(struct device *parent, int id, for (i = 0; i < n_devs; i++) { atomic_set(&cnts[i], 0); cells[i].usage_count = &cnts[i]; - ret = mfd_add_device(parent, id, cells + i, mem_base, irq_base); + ret = mfd_add_device(parent, id, cells + i, mem_base, + irq_base, domain); if (ret) break; } @@ -247,7 +246,8 @@ int mfd_clone_cell(const char *cell, const char **clones, size_t n_clones) for (i = 0; i < n_clones; i++) { cell_entry.name = clones[i]; /* don't give up if a single call fails; just report error */ - if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0)) + if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0, + NULL)) dev_err(dev, "failed to create platform device '%s'\n", clones[i]); } diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c index c4a69f193a1d..a345f9bb7b47 100644 --- a/drivers/mfd/palmas.c +++ b/drivers/mfd/palmas.c @@ -453,7 +453,8 @@ static int __devinit palmas_i2c_probe(struct i2c_client *i2c, ret = mfd_add_devices(palmas->dev, -1, children, ARRAY_SIZE(palmas_children), - NULL, regmap_irq_chip_get_base(palmas->irq_data)); + NULL, regmap_irq_chip_get_base(palmas->irq_data), + NULL); kfree(children); if (ret < 0) diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c index cdc1df7fa0e9..3a8fa88567b1 100644 --- a/drivers/mfd/rc5t583.c +++ b/drivers/mfd/rc5t583.c @@ -289,7 +289,7 @@ static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c, } ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs, - ARRAY_SIZE(rc5t583_subdevs), NULL, 0); + ARRAY_SIZE(rc5t583_subdevs), NULL, 0, NULL); if (ret) { dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret); goto err_add_devs; diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c index 685d61e431ad..0f70dce61160 100644 --- a/drivers/mfd/rdc321x-southbridge.c +++ b/drivers/mfd/rdc321x-southbridge.c @@ -87,7 +87,8 @@ static int __devinit rdc321x_sb_probe(struct pci_dev *pdev, rdc321x_wdt_pdata.sb_pdev = pdev; return mfd_add_devices(&pdev->dev, -1, - rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), NULL, 0); + rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), + NULL, 0, NULL); } static void __devexit rdc321x_sb_remove(struct pci_dev *pdev) diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 2988efde11eb..49d361a618d0 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -141,19 +141,19 @@ static int sec_pmic_probe(struct i2c_client *i2c, switch (sec_pmic->device_type) { case S5M8751X: ret = mfd_add_devices(sec_pmic->dev, -1, s5m8751_devs, - ARRAY_SIZE(s5m8751_devs), NULL, 0); + ARRAY_SIZE(s5m8751_devs), NULL, 0, NULL); break; case S5M8763X: ret = mfd_add_devices(sec_pmic->dev, -1, s5m8763_devs, - ARRAY_SIZE(s5m8763_devs), NULL, 0); + ARRAY_SIZE(s5m8763_devs), NULL, 0, NULL); break; case S5M8767X: ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs, - ARRAY_SIZE(s5m8767_devs), NULL, 0); + ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL); break; case S2MPS11X: ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs, - ARRAY_SIZE(s2mps11_devs), NULL, 0); + ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL); break; default: /* If this happens the probe function is problem */ diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c index d31fed07aefb..d35da6820bea 100644 --- a/drivers/mfd/sta2x11-mfd.c +++ b/drivers/mfd/sta2x11-mfd.c @@ -407,7 +407,7 @@ static int __devinit sta2x11_mfd_probe(struct pci_dev *pdev, sta2x11_mfd_bar0, ARRAY_SIZE(sta2x11_mfd_bar0), &pdev->resource[0], - 0); + 0, NULL); if (err) { dev_err(&pdev->dev, "mfd_add_devices[0] failed: %d\n", err); goto err_disable; @@ -417,7 +417,7 @@ static int __devinit sta2x11_mfd_probe(struct pci_dev *pdev, sta2x11_mfd_bar1, ARRAY_SIZE(sta2x11_mfd_bar1), &pdev->resource[1], - 0); + 0, NULL); if (err) { dev_err(&pdev->dev, "mfd_add_devices[1] failed: %d\n", err); goto err_disable; diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 2dd8d49cb30b..c94f521f392c 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -962,7 +962,7 @@ static int __devinit stmpe_add_device(struct stmpe *stmpe, struct mfd_cell *cell, int irq) { return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1, - NULL, stmpe->irq_base + irq); + NULL, stmpe->irq_base + irq, NULL); } static int __devinit stmpe_devices_init(struct stmpe *stmpe) diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c index 2d9e8799e733..b32940ec9034 100644 --- a/drivers/mfd/t7l66xb.c +++ b/drivers/mfd/t7l66xb.c @@ -388,7 +388,7 @@ static int t7l66xb_probe(struct platform_device *dev) ret = mfd_add_devices(&dev->dev, dev->id, t7l66xb_cells, ARRAY_SIZE(t7l66xb_cells), - iomem, t7l66xb->irq_base); + iomem, t7l66xb->irq_base, NULL); if (!ret) return 0; diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c index 048bf0532a09..b56ba6b43294 100644 --- a/drivers/mfd/tc3589x.c +++ b/drivers/mfd/tc3589x.c @@ -262,8 +262,8 @@ static int __devinit tc3589x_device_init(struct tc3589x *tc3589x) if (blocks & TC3589x_BLOCK_GPIO) { ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio, - ARRAY_SIZE(tc3589x_dev_gpio), NULL, - tc3589x->irq_base); + ARRAY_SIZE(tc3589x_dev_gpio), NULL, + tc3589x->irq_base, NULL); if (ret) { dev_err(tc3589x->dev, "failed to add gpio child\n"); return ret; @@ -273,8 +273,8 @@ static int __devinit tc3589x_device_init(struct tc3589x *tc3589x) if (blocks & TC3589x_BLOCK_KEYPAD) { ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad, - ARRAY_SIZE(tc3589x_dev_keypad), NULL, - tc3589x->irq_base); + ARRAY_SIZE(tc3589x_dev_keypad), NULL, + tc3589x->irq_base, NULL); if (ret) { dev_err(tc3589x->dev, "failed to keypad child\n"); return ret; diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c index d20a284ad4ba..413c891102f8 100644 --- a/drivers/mfd/tc6387xb.c +++ b/drivers/mfd/tc6387xb.c @@ -192,7 +192,7 @@ static int __devinit tc6387xb_probe(struct platform_device *dev) printk(KERN_INFO "Toshiba tc6387xb initialised\n"); ret = mfd_add_devices(&dev->dev, dev->id, tc6387xb_cells, - ARRAY_SIZE(tc6387xb_cells), iomem, irq); + ARRAY_SIZE(tc6387xb_cells), iomem, irq, NULL); if (!ret) return 0; diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 9612264f0e6d..dcab026fcbb2 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -700,8 +700,8 @@ static int __devinit tc6393xb_probe(struct platform_device *dev) tc6393xb_cells[TC6393XB_CELL_FB].pdata_size = sizeof(*tcpd->fb_data); ret = mfd_add_devices(&dev->dev, dev->id, - tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells), - iomem, tcpd->irq_base); + tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells), + iomem, tcpd->irq_base, NULL); if (!ret) return 0; diff --git a/drivers/mfd/ti-ssp.c b/drivers/mfd/ti-ssp.c index 4fb0e6c8e8fe..7c3675a74f93 100644 --- a/drivers/mfd/ti-ssp.c +++ b/drivers/mfd/ti-ssp.c @@ -412,7 +412,7 @@ static int __devinit ti_ssp_probe(struct platform_device *pdev) cells[id].data_size = data->pdata_size; } - error = mfd_add_devices(dev, 0, cells, 2, NULL, 0); + error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL); if (error < 0) { dev_err(dev, "cannot add mfd cells\n"); goto error_enable; diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c index a447f4ec11fb..cccc626c83c8 100644 --- a/drivers/mfd/timberdale.c +++ b/drivers/mfd/timberdale.c @@ -757,25 +757,25 @@ static int __devinit timb_probe(struct pci_dev *dev, err = mfd_add_devices(&dev->dev, -1, timberdale_cells_bar0_cfg0, ARRAY_SIZE(timberdale_cells_bar0_cfg0), - &dev->resource[0], msix_entries[0].vector); + &dev->resource[0], msix_entries[0].vector, NULL); break; case TIMB_HW_VER1: err = mfd_add_devices(&dev->dev, -1, timberdale_cells_bar0_cfg1, ARRAY_SIZE(timberdale_cells_bar0_cfg1), - &dev->resource[0], msix_entries[0].vector); + &dev->resource[0], msix_entries[0].vector, NULL); break; case TIMB_HW_VER2: err = mfd_add_devices(&dev->dev, -1, timberdale_cells_bar0_cfg2, ARRAY_SIZE(timberdale_cells_bar0_cfg2), - &dev->resource[0], msix_entries[0].vector); + &dev->resource[0], msix_entries[0].vector, NULL); break; case TIMB_HW_VER3: err = mfd_add_devices(&dev->dev, -1, timberdale_cells_bar0_cfg3, ARRAY_SIZE(timberdale_cells_bar0_cfg3), - &dev->resource[0], msix_entries[0].vector); + &dev->resource[0], msix_entries[0].vector, NULL); break; default: dev_err(&dev->dev, "Uknown IP setup: %d.%d.%d\n", @@ -792,7 +792,7 @@ static int __devinit timb_probe(struct pci_dev *dev, err = mfd_add_devices(&dev->dev, 0, timberdale_cells_bar1, ARRAY_SIZE(timberdale_cells_bar1), - &dev->resource[1], msix_entries[0].vector); + &dev->resource[1], msix_entries[0].vector, NULL); if (err) { dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err); goto err_mfd2; @@ -803,7 +803,7 @@ static int __devinit timb_probe(struct pci_dev *dev, ((priv->fw.config & TIMB_HW_VER_MASK) == TIMB_HW_VER3)) { err = mfd_add_devices(&dev->dev, 1, timberdale_cells_bar2, ARRAY_SIZE(timberdale_cells_bar2), - &dev->resource[2], msix_entries[0].vector); + &dev->resource[2], msix_entries[0].vector, NULL); if (err) { dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err); goto err_mfd2; diff --git a/drivers/mfd/tps6105x.c b/drivers/mfd/tps6105x.c index a293b978e27c..14051bdc714b 100644 --- a/drivers/mfd/tps6105x.c +++ b/drivers/mfd/tps6105x.c @@ -188,7 +188,7 @@ static int __devinit tps6105x_probe(struct i2c_client *client, } ret = mfd_add_devices(&client->dev, 0, tps6105x_cells, - ARRAY_SIZE(tps6105x_cells), NULL, 0); + ARRAY_SIZE(tps6105x_cells), NULL, 0, NULL); if (ret) goto fail; diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c index 33ba7723c967..1b203499c744 100644 --- a/drivers/mfd/tps6507x.c +++ b/drivers/mfd/tps6507x.c @@ -100,7 +100,7 @@ static int tps6507x_i2c_probe(struct i2c_client *i2c, ret = mfd_add_devices(tps6507x->dev, -1, tps6507x_devs, ARRAY_SIZE(tps6507x_devs), - NULL, 0); + NULL, 0, NULL); if (ret < 0) goto err; diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c index 80e24f4b47bf..50fd87c87a1c 100644 --- a/drivers/mfd/tps65090.c +++ b/drivers/mfd/tps65090.c @@ -292,7 +292,7 @@ static int __devinit tps65090_i2c_probe(struct i2c_client *client, } ret = mfd_add_devices(tps65090->dev, -1, tps65090s, - ARRAY_SIZE(tps65090s), NULL, 0); + ARRAY_SIZE(tps65090s), NULL, 0, NULL); if (ret) { dev_err(&client->dev, "add mfd devices failed with err: %d\n", ret); diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index 3bc274409b58..a95e9421b735 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -191,7 +191,7 @@ static int __devinit tps65217_probe(struct i2c_client *client, } ret = mfd_add_devices(tps->dev, -1, tps65217s, - ARRAY_SIZE(tps65217s), NULL, 0); + ARRAY_SIZE(tps65217s), NULL, 0, NULL); if (ret < 0) { dev_err(tps->dev, "mfd_add_devices failed: %d\n", ret); return ret; diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index 353c34812120..5f58370ccf55 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -493,7 +493,8 @@ static int __devinit tps6586x_i2c_probe(struct i2c_client *client, } ret = mfd_add_devices(tps6586x->dev, -1, - tps6586x_cell, ARRAY_SIZE(tps6586x_cell), NULL, 0); + tps6586x_cell, ARRAY_SIZE(tps6586x_cell), + NULL, 0, NULL); if (ret < 0) { dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret); goto err_mfd_add; diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 1c563792c777..d3ce4d569deb 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -254,7 +254,7 @@ static __devinit int tps65910_i2c_probe(struct i2c_client *i2c, ret = mfd_add_devices(tps65910->dev, -1, tps65910s, ARRAY_SIZE(tps65910s), - NULL, 0); + NULL, 0, NULL); if (ret < 0) { dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret); return ret; diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c index 74fd8cb5f372..4658b5bdcd84 100644 --- a/drivers/mfd/tps65912-core.c +++ b/drivers/mfd/tps65912-core.c @@ -146,7 +146,7 @@ int tps65912_device_init(struct tps65912 *tps65912) ret = mfd_add_devices(tps65912->dev, -1, tps65912s, ARRAY_SIZE(tps65912s), - NULL, 0); + NULL, 0, NULL); if (ret < 0) goto err; diff --git a/drivers/mfd/twl4030-audio.c b/drivers/mfd/twl4030-audio.c index 838ce4eb444e..77c9acb14583 100644 --- a/drivers/mfd/twl4030-audio.c +++ b/drivers/mfd/twl4030-audio.c @@ -223,7 +223,7 @@ static int __devinit twl4030_audio_probe(struct platform_device *pdev) if (childs) ret = mfd_add_devices(&pdev->dev, pdev->id, audio->cells, - childs, NULL, 0); + childs, NULL, 0, NULL); else { dev_err(&pdev->dev, "No platform data found for childs\n"); ret = -ENODEV; diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index b0fad0ffca56..3dca5c195a20 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -632,7 +632,7 @@ static int __devinit twl6040_probe(struct i2c_client *client, } ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children, - NULL, 0); + NULL, 0, NULL); if (ret) goto mfd_err; diff --git a/drivers/mfd/vx855.c b/drivers/mfd/vx855.c index 872aff21e4be..b9a636d44c7f 100644 --- a/drivers/mfd/vx855.c +++ b/drivers/mfd/vx855.c @@ -102,7 +102,7 @@ static __devinit int vx855_probe(struct pci_dev *pdev, vx855_gpio_resources[1].end = vx855_gpio_resources[1].start + 3; ret = mfd_add_devices(&pdev->dev, -1, vx855_cells, ARRAY_SIZE(vx855_cells), - NULL, 0); + NULL, 0, NULL); /* we always return -ENODEV here in order to enable other * drivers like old, not-yet-platform_device ported i2c-viapro */ diff --git a/drivers/mfd/wl1273-core.c b/drivers/mfd/wl1273-core.c index f39b756df561..86e0e4309fc2 100644 --- a/drivers/mfd/wl1273-core.c +++ b/drivers/mfd/wl1273-core.c @@ -241,7 +241,7 @@ static int __devinit wl1273_core_probe(struct i2c_client *client, __func__, children); r = mfd_add_devices(&client->dev, -1, core->cells, - children, NULL, 0); + children, NULL, 0, NULL); if (r) goto err; diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 946698fd2dc6..301731035940 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -1813,27 +1813,27 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) case WM8310: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8310_devs, ARRAY_SIZE(wm8310_devs), - NULL, 0); + NULL, 0, NULL); break; case WM8311: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8311_devs, ARRAY_SIZE(wm8311_devs), - NULL, 0); + NULL, 0, NULL); if (!pdata || !pdata->disable_touch) mfd_add_devices(wm831x->dev, wm831x_num, touch_devs, ARRAY_SIZE(touch_devs), - NULL, 0); + NULL, 0, NULL); break; case WM8312: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8312_devs, ARRAY_SIZE(wm8312_devs), - NULL, 0); + NULL, 0, NULL); if (!pdata || !pdata->disable_touch) mfd_add_devices(wm831x->dev, wm831x_num, touch_devs, ARRAY_SIZE(touch_devs), - NULL, 0); + NULL, 0, NULL); break; case WM8320: @@ -1842,7 +1842,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) case WM8326: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8320_devs, ARRAY_SIZE(wm8320_devs), - NULL, 0); + NULL, 0, NULL); break; default: @@ -1867,7 +1867,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) if (ret & WM831X_XTAL_ENA) { ret = mfd_add_devices(wm831x->dev, wm831x_num, rtc_devs, ARRAY_SIZE(rtc_devs), - NULL, 0); + NULL, 0, NULL); if (ret != 0) { dev_err(wm831x->dev, "Failed to add RTC: %d\n", ret); goto err_irq; @@ -1880,7 +1880,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) /* Treat errors as non-critical */ ret = mfd_add_devices(wm831x->dev, wm831x_num, backlight_devs, ARRAY_SIZE(backlight_devs), NULL, - 0); + 0, NULL); if (ret < 0) dev_err(wm831x->dev, "Failed to add backlight: %d\n", ret); diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c index 4b7d378551d5..639ca359242f 100644 --- a/drivers/mfd/wm8400-core.c +++ b/drivers/mfd/wm8400-core.c @@ -70,7 +70,7 @@ static int wm8400_register_codec(struct wm8400 *wm8400) .pdata_size = sizeof(*wm8400), }; - return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0); + return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0, NULL); } /* diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index eec74aa55fdf..2febf88cfce8 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -414,7 +414,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq) ret = mfd_add_devices(wm8994->dev, -1, wm8994_regulator_devs, ARRAY_SIZE(wm8994_regulator_devs), - NULL, 0); + NULL, 0, NULL); if (ret != 0) { dev_err(wm8994->dev, "Failed to add children: %d\n", ret); goto err; @@ -648,7 +648,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq) ret = mfd_add_devices(wm8994->dev, -1, wm8994_devs, ARRAY_SIZE(wm8994_devs), - NULL, 0); + NULL, 0, NULL); if (ret != 0) { dev_err(wm8994->dev, "Failed to add children: %d\n", ret); goto err_irq; diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index 695ea35f75b0..d0a7e408efe9 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -837,7 +837,7 @@ static int __devinit tegra_nvec_probe(struct platform_device *pdev) } ret = mfd_add_devices(nvec->dev, -1, nvec_devices, - ARRAY_SIZE(nvec_devices), base, 0); + ARRAY_SIZE(nvec_devices), base, 0, NULL); if (ret) dev_err(nvec->dev, "error adding subdevices\n"); diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 3a8435a8058f..cebe97ee98b8 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -16,6 +16,8 @@ #include +struct irq_domain; + /* * This struct describes the MFD part ("cell"). * After registration the copy of this structure will become the platform data @@ -98,7 +100,7 @@ static inline const struct mfd_cell *mfd_get_cell(struct platform_device *pdev) extern int mfd_add_devices(struct device *parent, int id, struct mfd_cell *cells, int n_devs, struct resource *mem_base, - int irq_base); + int irq_base, struct irq_domain *irq_domain); extern void mfd_remove_devices(struct device *parent); -- cgit v1.2.3 From d51f42d2c5b7e11b47876b8b5c53f0ac317fef24 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 21 Aug 2012 15:15:52 +0900 Subject: mfd: MAX77693: Fix interrupt handling bug This patch fix bug related to interrupt handling for MAX77693 devices. - Unmask interrupt masking bit for charger/flash/muic to revolve that interrupt isn't happened when external connector is attached. - Fix wrong regmap instance when muic interrupt is happened. This patch were discussed and confirm discussion about this patch on below url: http://lkml.org/lkml/2012/7/16/118 Signed-off-by: Chanwoo Choi Signed-off-by: Myungjoo Ham Signed-off-by: Kyungmin Park Acked-by: Greg Kroah-Hartman Signed-off-by: Samuel Ortiz --- drivers/mfd/max77693-irq.c | 36 +++++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/drivers/mfd/max77693-irq.c b/drivers/mfd/max77693-irq.c index 2b403569e0a6..1029d018c739 100644 --- a/drivers/mfd/max77693-irq.c +++ b/drivers/mfd/max77693-irq.c @@ -137,6 +137,9 @@ static void max77693_irq_mask(struct irq_data *data) const struct max77693_irq_data *irq_data = irq_to_max77693_irq(max77693, data->irq); + if (irq_data->group >= MAX77693_IRQ_GROUP_NR) + return; + if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3) max77693->irq_masks_cur[irq_data->group] &= ~irq_data->mask; else @@ -149,6 +152,9 @@ static void max77693_irq_unmask(struct irq_data *data) const struct max77693_irq_data *irq_data = irq_to_max77693_irq(max77693, data->irq); + if (irq_data->group >= MAX77693_IRQ_GROUP_NR) + return; + if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3) max77693->irq_masks_cur[irq_data->group] |= irq_data->mask; else @@ -200,7 +206,7 @@ static irqreturn_t max77693_irq_thread(int irq, void *data) if (irq_src & MAX77693_IRQSRC_MUIC) /* MUIC INT1 ~ INT3 */ - max77693_bulk_read(max77693->regmap, MAX77693_MUIC_REG_INT1, + max77693_bulk_read(max77693->regmap_muic, MAX77693_MUIC_REG_INT1, MAX77693_NUM_IRQ_MUIC_REGS, &irq_reg[MUIC_INT1]); /* Apply masking */ @@ -255,7 +261,8 @@ int max77693_irq_init(struct max77693_dev *max77693) { struct irq_domain *domain; int i; - int ret; + int ret = 0; + u8 intsrc_mask; mutex_init(&max77693->irqlock); @@ -287,19 +294,38 @@ int max77693_irq_init(struct max77693_dev *max77693) &max77693_irq_domain_ops, max77693); if (!domain) { dev_err(max77693->dev, "could not create irq domain\n"); - return -ENODEV; + ret = -ENODEV; + goto err_irq; } max77693->irq_domain = domain; + /* Unmask max77693 interrupt */ + ret = max77693_read_reg(max77693->regmap, + MAX77693_PMIC_REG_INTSRC_MASK, &intsrc_mask); + if (ret < 0) { + dev_err(max77693->dev, "fail to read PMIC register\n"); + goto err_irq; + } + + intsrc_mask &= ~(MAX77693_IRQSRC_CHG); + intsrc_mask &= ~(MAX77693_IRQSRC_FLASH); + intsrc_mask &= ~(MAX77693_IRQSRC_MUIC); + ret = max77693_write_reg(max77693->regmap, + MAX77693_PMIC_REG_INTSRC_MASK, intsrc_mask); + if (ret < 0) { + dev_err(max77693->dev, "fail to write PMIC register\n"); + goto err_irq; + } + ret = request_threaded_irq(max77693->irq, NULL, max77693_irq_thread, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "max77693-irq", max77693); - if (ret) dev_err(max77693->dev, "Failed to request IRQ %d: %d\n", max77693->irq, ret); - return 0; +err_irq: + return ret; } void max77693_irq_exit(struct max77693_dev *max77693) -- cgit v1.2.3 From b186b12487efc80c44f2f0d26cc26eb249cf1524 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 21 Aug 2012 15:16:23 +0900 Subject: mfd: MAX77693: Fix NULL pointer error when initializing irqs This patch initialize register map of MUIC device because mfd driver of Maxim MAX77693 use regmap-muic instance of MUIC device when irqs of Maxim MAX77693 is initialized before call max77693-muic probe() function. Signed-off-by: Chanwoo Choi Signed-off-by: Myungjoo Ham Signed-off-by: Kyungmin Park Reported-by: Sylwester Nawrocki Acked-by: Greg Kroah-Hartman Signed-off-by: Samuel Ortiz --- drivers/extcon/extcon-max77693.c | 19 ++++++++++++------- drivers/mfd/max77693.c | 14 ++++++++++++++ 2 files changed, 26 insertions(+), 7 deletions(-) diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index 920a609b2c35..38f9e52f358b 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -669,13 +669,18 @@ static int __devinit max77693_muic_probe(struct platform_device *pdev) } info->dev = &pdev->dev; info->max77693 = max77693; - info->max77693->regmap_muic = regmap_init_i2c(info->max77693->muic, - &max77693_muic_regmap_config); - if (IS_ERR(info->max77693->regmap_muic)) { - ret = PTR_ERR(info->max77693->regmap_muic); - dev_err(max77693->dev, - "failed to allocate register map: %d\n", ret); - goto err_regmap; + if (info->max77693->regmap_muic) + dev_dbg(&pdev->dev, "allocate register map\n"); + else { + info->max77693->regmap_muic = devm_regmap_init_i2c( + info->max77693->muic, + &max77693_muic_regmap_config); + if (IS_ERR(info->max77693->regmap_muic)) { + ret = PTR_ERR(info->max77693->regmap_muic); + dev_err(max77693->dev, + "failed to allocate register map: %d\n", ret); + goto err_regmap; + } } platform_set_drvdata(pdev, info); mutex_init(&info->mutex); diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index 4fdd03d28539..cc5155e20494 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -152,6 +152,20 @@ static int max77693_i2c_probe(struct i2c_client *i2c, max77693->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC); i2c_set_clientdata(max77693->haptic, max77693); + /* + * Initialize register map for MUIC device because use regmap-muic + * instance of MUIC device when irq of max77693 is initialized + * before call max77693-muic probe() function. + */ + max77693->regmap_muic = devm_regmap_init_i2c(max77693->muic, + &max77693_regmap_config); + if (IS_ERR(max77693->regmap_muic)) { + ret = PTR_ERR(max77693->regmap_muic); + dev_err(max77693->dev, + "failed to allocate register map: %d\n", ret); + goto err_regmap; + } + ret = max77693_irq_init(max77693); if (ret < 0) goto err_irq; -- cgit v1.2.3 From e1e5b7e4251c7538ca08c2c5545b0c2fbd8a6635 Mon Sep 17 00:00:00 2001 From: Matthew Leach Date: Tue, 11 Sep 2012 17:56:57 +0100 Subject: ARM: 7532/1: decompressor: reset SCTLR.TRE for VMSA ARMv7 cores This patch zeroes the SCTLR.TRE bit prior to setting the mapping as cacheable for ARMv7 cores in the decompressor, ensuring that the memory region attributes are obtained from the C and B bits, not from the page tables. Cc: Nicolas Pitre Reviewed-by: Will Deacon Signed-off-by: Matthew Leach Signed-off-by: Will Deacon Cc: Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 81769c1341fa..bc67cbff3944 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -653,6 +653,7 @@ __armv7_mmu_cache_on: mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs #endif mrc p15, 0, r0, c1, c0, 0 @ read control reg + bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer #ifdef CONFIG_MMU -- cgit v1.2.3 From 37407ea7f93864c2cfc03edf8f37872ec539ea2b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 16 Sep 2012 12:29:43 -0700 Subject: Revert "sched: Improve scalability via 'CPU buddies', which withstand random perturbations" This reverts commit 970e178985cadbca660feb02f4d2ee3a09f7fdda. Nikolay Ulyanitsky reported thatthe 3.6-rc5 kernel has a 15-20% performance drop on PostgreSQL 9.2 on his machine (running "pgbench"). Borislav Petkov was able to reproduce this, and bisected it to this commit 970e178985ca ("sched: Improve scalability via 'CPU buddies' ...") apparently because the new single-idle-buddy model simply doesn't find idle CPU's to reschedule on aggressively enough. Mike Galbraith suspects that it is likely due to the user-mode spinlocks in PostgreSQL not reacting well to preemption, but we don't really know the details - I'll just revert the commit for now. There are hopefully other approaches to improve scheduler scalability without it causing these kinds of downsides. Reported-by: Nikolay Ulyanitsky Bisected-by: Borislav Petkov Acked-by: Mike Galbraith Cc: Andrew Morton Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Linus Torvalds --- include/linux/sched.h | 1 - kernel/sched/core.c | 39 +-------------------------------------- kernel/sched/fair.c | 28 +++++++++++++++++++++------- 3 files changed, 22 insertions(+), 46 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index b8c86648a2f9..23bddac4bad8 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -954,7 +954,6 @@ struct sched_domain { unsigned int smt_gain; int flags; /* See SD_* */ int level; - int idle_buddy; /* cpu assigned to select_idle_sibling() */ /* Runtime fields. */ unsigned long last_balance; /* init to jiffies. units in jiffies */ diff --git a/kernel/sched/core.c b/kernel/sched/core.c index a4ea245f3d85..649c9f876cb1 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -6014,11 +6014,6 @@ static void destroy_sched_domains(struct sched_domain *sd, int cpu) * SD_SHARE_PKG_RESOURCE set (Last Level Cache Domain) for this * allows us to avoid some pointer chasing select_idle_sibling(). * - * Iterate domains and sched_groups downward, assigning CPUs to be - * select_idle_sibling() hw buddy. Cross-wiring hw makes bouncing - * due to random perturbation self canceling, ie sw buddies pull - * their counterpart to their CPU's hw counterpart. - * * Also keep a unique ID per domain (we use the first cpu number in * the cpumask of the domain), this allows us to quickly tell if * two cpus are in the same cache domain, see cpus_share_cache(). @@ -6032,40 +6027,8 @@ static void update_top_cache_domain(int cpu) int id = cpu; sd = highest_flag_domain(cpu, SD_SHARE_PKG_RESOURCES); - if (sd) { - struct sched_domain *tmp = sd; - struct sched_group *sg, *prev; - bool right; - - /* - * Traverse to first CPU in group, and count hops - * to cpu from there, switching direction on each - * hop, never ever pointing the last CPU rightward. - */ - do { - id = cpumask_first(sched_domain_span(tmp)); - prev = sg = tmp->groups; - right = 1; - - while (cpumask_first(sched_group_cpus(sg)) != id) - sg = sg->next; - - while (!cpumask_test_cpu(cpu, sched_group_cpus(sg))) { - prev = sg; - sg = sg->next; - right = !right; - } - - /* A CPU went down, never point back to domain start. */ - if (right && cpumask_first(sched_group_cpus(sg->next)) == id) - right = false; - - sg = right ? sg->next : prev; - tmp->idle_buddy = cpumask_first(sched_group_cpus(sg)); - } while ((tmp = tmp->child)); - + if (sd) id = cpumask_first(sched_domain_span(sd)); - } rcu_assign_pointer(per_cpu(sd_llc, cpu), sd); per_cpu(sd_llc_id, cpu) = id; diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 42d9df6a5ca4..96e2b18b6283 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -2637,6 +2637,8 @@ static int select_idle_sibling(struct task_struct *p, int target) int cpu = smp_processor_id(); int prev_cpu = task_cpu(p); struct sched_domain *sd; + struct sched_group *sg; + int i; /* * If the task is going to be woken-up on this cpu and if it is @@ -2653,17 +2655,29 @@ static int select_idle_sibling(struct task_struct *p, int target) return prev_cpu; /* - * Otherwise, check assigned siblings to find an elegible idle cpu. + * Otherwise, iterate the domains and find an elegible idle cpu. */ sd = rcu_dereference(per_cpu(sd_llc, target)); - for_each_lower_domain(sd) { - if (!cpumask_test_cpu(sd->idle_buddy, tsk_cpus_allowed(p))) - continue; - if (idle_cpu(sd->idle_buddy)) - return sd->idle_buddy; - } + sg = sd->groups; + do { + if (!cpumask_intersects(sched_group_cpus(sg), + tsk_cpus_allowed(p))) + goto next; + for_each_cpu(i, sched_group_cpus(sg)) { + if (!idle_cpu(i)) + goto next; + } + + target = cpumask_first_and(sched_group_cpus(sg), + tsk_cpus_allowed(p)); + goto done; +next: + sg = sg->next; + } while (sg != sd->groups); + } +done: return target; } -- cgit v1.2.3 From 5698bd757d55b1bb87edd1a9744ab09c142abfc2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 16 Sep 2012 14:58:51 -0700 Subject: Linux 3.6-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 0f66f146d57e..ae6928cc59d3 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v1.2.3 From e376fdf42062e7373b82093b278f99aa2b547db7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 17 Sep 2012 01:23:21 +0200 Subject: MIPS: Malta: Don't crash on spurious interrupt. 48d480b0bde794781fcae9501fb043c1bac0e523 [[MIPS] Malta: Fix off by one bug in interrupt handler.] did not take in account that irq_ffs() will also return 0 if for some reason the set of pending interrupts happens to be empty. This is trivial to trigger with a RM5261 CPU module running a 64-bit kernel and results in something like the following: CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff801772d0, ra == ffffffff8017ad24 Oops[#1]: Cpu 0 $ 0 : 0000000000000000 ffffffff9000a4e0 ffffffff9000a4e0 ffffffff9000a4e0 $ 4 : ffffffff80592be0 0000000000000000 00000000000000d6 ffffffff80322ed0 $ 8 : ffffffff805fe538 0000000000000000 ffffffff9000a4e0 ffffffff80590000 $12 : 00000000000000d6 0000000000000000 ffffffff80600000 ffffffff805fe538 $16 : 0000000000000000 0000000000000010 ffffffff80592be0 0000000000000010 $20 : 0000000000000000 0000000000500001 0000000000000000 ffffffff8051e078 $24 : 0000000000000028 ffffffff803226e8 $28 : 9800000003828000 980000000382b900 ffffffff8051e060 ffffffff8017ad24 Hi : 0000000000000000 Lo : 0000006388974000 epc : ffffffff801772d0 handle_irq_event_percpu+0x70/0x2f0 Not tainted ra : ffffffff8017ad24 handle_percpu_irq+0x54/0x88 Status: 9000a4e2 KX SX UX KERNEL EXL Cause : 00808008 BadVA : 0000000000000000 PrId : 000028a0 (Nevada) Modules linked in: Process init (pid: 1, threadinfo=9800000003828000, task=9800000003827968, tls=0000000077087490) Stack : ffffffff80592be0 ffffffff8058d248 0000000000000040 0000000000000000 ffffffff80613340 0000000000500001 ffffffff805a0000 0000000000000882 9800000003b89000 ffffffff8017ad24 00000000000000d5 0000000000000010 ffffffff9000a4e1 ffffffff801769f4 ffffffff9000a4e0 ffffffff801037f8 0000000000000000 ffffffff80101c44 0000000000000000 ffffffff9000a4e0 0000000000000000 9000000018000000 90000000180003f9 0000000000000001 0000000000000000 00000000000000ff 0000000000000018 0000000000000001 0000000000000001 00000000003fffff 0000000000000020 ffffffff802cf7ac ffffffff80208918 000000007fdadf08 ffffffff80612d88 ffffffff9000a4e1 0000000000000040 0000000000000000 ffffffff80613340 0000000000500001 ... Call Trace: [] handle_irq_event_percpu+0x70/0x2f0 [] handle_percpu_irq+0x54/0x88 [] generic_handle_irq+0x44/0x60 [] do_IRQ+0x48/0x70 [] ret_from_irq+0x0/0x4 [] serial8250_startup+0x310/0x870 [] uart_startup.part.7+0x9c/0x330 [] uart_open+0x15c/0x1b0 [] tty_open+0x1fc/0x720 [] chrdev_open+0x7c/0x180 [] do_dentry_open.isra.14+0x288/0x390 [] nameidata_to_filp+0x5c/0xc0 [] do_last.isra.33+0x330/0x8f0 [] path_openat+0xbc/0x440 [] do_filp_open+0x38/0xa8 [] do_sys_open+0x124/0x218 [] handle_sys+0x118/0x13c Code: 02d5a825 12800012 02a0b02d de850008 0040f809 0220202d 0040a82d 40026000 ---[ end trace 5d8e7b9a86badd2d ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-int.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 7b13a4caeea4..fea823f18479 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -273,16 +273,19 @@ asmlinkage void plat_irq_dispatch(void) unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; int irq; + if (unlikely(!pending)) { + spurious_interrupt(); + return; + } + irq = irq_ffs(pending); if (irq == MIPSCPU_INT_I8259A) malta_hw0_irqdispatch(); else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()])) malta_ipi_irqdispatch(); - else if (irq >= 0) - do_IRQ(MIPS_CPU_IRQ_BASE + irq); else - spurious_interrupt(); + do_IRQ(MIPS_CPU_IRQ_BASE + irq); } #ifdef CONFIG_MIPS_MT_SMP -- cgit v1.2.3 From dbc5e1e89aafd484ad279ec6b9267dcd2c67df3f Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Mon, 27 Aug 2012 09:42:37 -0700 Subject: ARM: SAMSUNG: use spin_lock_irqsave() in clk_set_parent From 0cdf3aff, "ARM: SAMSUNG: use spin_lock_irqsave() in clk_{enable,disable}": The clk_enable()and clk_disable() can be used process and ISR either. And actually it is used for real product and other platforms use it now. So spin_lock_irqsave() should be used instead. We need to make a similar change in clk_set_parent(). Otherwise, you can potentially get spinlock recursion: BUG: spinlock recursion on CPU#0, kinteractive/68 lock: 807832a8, .magic: dead4ead, .owner: kinteractive/68, .owner_cpu: 0 [<80015f54>] (unwind_backtrace+0x0/0x128) from [<804f2914>] (dump_stack+0x20/0x24) [<804f2914>] (dump_stack+0x20/0x24) from [<804f57b8>] (spin_dump+0x80/0x94) [<804f57b8>] (spin_dump+0x80/0x94) from [<804f57f8>] (spin_bug+0x2c/0x30) [<804f57f8>] (spin_bug+0x2c/0x30) from [<80222730>] (do_raw_spin_lock+0x54/0x150) [<80222730>] (do_raw_spin_lock+0x54/0x150) from [<804f96ec>] (_raw_spin_lock_irqsave+0x20/0x28) [<804f96ec>] (_raw_spin_lock_irqsave+0x20/0x28) from [<80022ea4>] (clk_enable+0x3c/0x84) [<80022ea4>] (clk_enable+0x3c/0x84) from [<8038336c>] (s5p_mfc_clock_on+0x60/0x74) [<8038336c>] (s5p_mfc_clock_on+0x60/0x74) from [<8038645c>] (s5p_mfc_read_info+0x20/0x38) [<8038645c>] (s5p_mfc_read_info+0x20/0x38) from [<8037ca3c>] (s5p_mfc_handle_frame+0x2e4/0x4bc) [<8037ca3c>] (s5p_mfc_handle_frame+0x2e4/0x4bc) from [<8037d420>] (s5p_mfc_irq+0x1ec/0x6cc) [<8037d420>] (s5p_mfc_irq+0x1ec/0x6cc) from [<8007fc74>] (handle_irq_event_percpu+0x8c/0x244) [<8007fc74>] (handle_irq_event_percpu+0x8c/0x244) from [<8007fe78>] (handle_irq_event+0x4c/0x6c) [<8007fe78>] (handle_irq_event+0x4c/0x6c) from [<80082dd8>] (handle_fasteoi_irq+0xe4/0x150) [<80082dd8>] (handle_fasteoi_irq+0xe4/0x150) from [<8007f424>] (generic_handle_irq+0x3c/0x50) [<8007f424>] (generic_handle_irq+0x3c/0x50) from [<8000f7c4>] (handle_IRQ+0x88/0xc8) [<8000f7c4>] (handle_IRQ+0x88/0xc8) from [<80008564>] (gic_handle_irq+0x44/0x68) [<80008564>] (gic_handle_irq+0x44/0x68) from [<8000e400>] (__irq_svc+0x40/0x60) Exception stack(0xef3cbe68 to 0xef3cbeb0) [<8000e400>] (__irq_svc+0x40/0x60) from [<80022cfc>] (clk_set_parent+0x30/0x74) [<80022cfc>] (clk_set_parent+0x30/0x74) from [<803ac7f8>] (set_apll.isra.0+0x28/0xb0) [<803ac7f8>] (set_apll.isra.0+0x28/0xb0) from [<803ac8e4>] (exynos5250_set_frequency+0x64/0xb8) [<803ac8e4>] (exynos5250_set_frequency+0x64/0xb8) from [<803ac280>] (exynos_target+0x1b0/0x220) [<803ac280>] (exynos_target+0x1b0/0x220) from [<803a4a0c>] (__cpufreq_driver_target+0xb0/0xd4) [<803a4a0c>] (__cpufreq_driver_target+0xb0/0xd4) from [<803aab80>] (cpufreq_interactive_updown_task+0x214/0x264) [<803aab80>] (cpufreq_interactive_updown_task+0x214/0x264) from [<80047d04>] (kthread+0x9c/0xa8) [<80047d04>] (kthread+0x9c/0xa8) from [<8000fa48>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Mandeep Singh Baines Suggested-by: Sunil Mazhavanchery Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: Ben Dooks Cc: Russell King Cc: Minho Ban Cc: Jaecheol Lee Cc: Sunyoung Kang Cc: Olof Johansson Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/clock.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 65c5eca475e7..80eacca4682a 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -173,17 +173,18 @@ struct clk *clk_get_parent(struct clk *clk) int clk_set_parent(struct clk *clk, struct clk *parent) { + unsigned long flags; int ret = 0; if (IS_ERR(clk)) return -EINVAL; - spin_lock(&clocks_lock); + spin_lock_irqsave(&clocks_lock, flags); if (clk->ops && clk->ops->set_parent) ret = (clk->ops->set_parent)(clk, parent); - spin_unlock(&clocks_lock); + spin_unlock_irqrestore(&clocks_lock, flags); return ret; } -- cgit v1.2.3 From 4db84d4f07b87c452c6000e0595dc9570ed21b41 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Mon, 10 Sep 2012 16:43:26 +0200 Subject: s390/mm: fix user access page-table walk code The s390 page-table walk code, used for user copy and futex, currently cannot handle huge pages. As far as user copy is concerned, that is not really a problem because those functions will only be used on old hardware that has no huge page support. But the futex code will also use pagetable walk functions on current hardware when user space runs in primary space mode. So, if a futex sits in a huge page, the futex operation on it will result in a page fault loop or even data corruption. This patch adds the code for resolving huge page mappings in the user access pagetable walk code on s390. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/lib/uaccess_pt.c | 142 ++++++++++++++++++++------------------------- 1 file changed, 63 insertions(+), 79 deletions(-) diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index 60ee2b883797..2d37bb861faf 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -2,69 +2,82 @@ * User access functions based on page table walks for enhanced * system layout without hardware support. * - * Copyright IBM Corp. 2006 + * Copyright IBM Corp. 2006, 2012 * Author(s): Gerald Schaefer (gerald.schaefer@de.ibm.com) */ #include #include #include +#include #include #include #include "uaccess.h" -static inline pte_t *follow_table(struct mm_struct *mm, unsigned long addr) + +/* + * Returns kernel address for user virtual address. If the returned address is + * >= -4095 (IS_ERR_VALUE(x) returns true), a fault has occured and the address + * contains the (negative) exception code. + */ +static __always_inline unsigned long follow_table(struct mm_struct *mm, + unsigned long addr, int write) { pgd_t *pgd; pud_t *pud; pmd_t *pmd; + pte_t *ptep; pgd = pgd_offset(mm, addr); if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd))) - return (pte_t *) 0x3a; + return -0x3aUL; pud = pud_offset(pgd, addr); if (pud_none(*pud) || unlikely(pud_bad(*pud))) - return (pte_t *) 0x3b; + return -0x3bUL; pmd = pmd_offset(pud, addr); - if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) - return (pte_t *) 0x10; + if (pmd_none(*pmd)) + return -0x10UL; + if (pmd_huge(*pmd)) { + if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO)) + return -0x04UL; + return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK); + } + if (unlikely(pmd_bad(*pmd))) + return -0x10UL; + + ptep = pte_offset_map(pmd, addr); + if (!pte_present(*ptep)) + return -0x11UL; + if (write && !pte_write(*ptep)) + return -0x04UL; - return pte_offset_map(pmd, addr); + return (pte_val(*ptep) & PAGE_MASK) + (addr & ~PAGE_MASK); } static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr, size_t n, int write_user) { struct mm_struct *mm = current->mm; - unsigned long offset, pfn, done, size; - pte_t *pte; + unsigned long offset, done, size, kaddr; void *from, *to; done = 0; retry: spin_lock(&mm->page_table_lock); do { - pte = follow_table(mm, uaddr); - if ((unsigned long) pte < 0x1000) + kaddr = follow_table(mm, uaddr, write_user); + if (IS_ERR_VALUE(kaddr)) goto fault; - if (!pte_present(*pte)) { - pte = (pte_t *) 0x11; - goto fault; - } else if (write_user && !pte_write(*pte)) { - pte = (pte_t *) 0x04; - goto fault; - } - pfn = pte_pfn(*pte); - offset = uaddr & (PAGE_SIZE - 1); + offset = uaddr & ~PAGE_MASK; size = min(n - done, PAGE_SIZE - offset); if (write_user) { - to = (void *)((pfn << PAGE_SHIFT) + offset); + to = (void *) kaddr; from = kptr + done; } else { - from = (void *)((pfn << PAGE_SHIFT) + offset); + from = (void *) kaddr; to = kptr + done; } memcpy(to, from, size); @@ -75,7 +88,7 @@ retry: return n - done; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(uaddr, (unsigned long) pte, write_user)) + if (__handle_fault(uaddr, -kaddr, write_user)) return n - done; goto retry; } @@ -84,27 +97,22 @@ fault: * Do DAT for user address by page table walk, return kernel address. * This function needs to be called with current->mm->page_table_lock held. */ -static __always_inline unsigned long __dat_user_addr(unsigned long uaddr) +static __always_inline unsigned long __dat_user_addr(unsigned long uaddr, + int write) { struct mm_struct *mm = current->mm; - unsigned long pfn; - pte_t *pte; + unsigned long kaddr; int rc; retry: - pte = follow_table(mm, uaddr); - if ((unsigned long) pte < 0x1000) - goto fault; - if (!pte_present(*pte)) { - pte = (pte_t *) 0x11; + kaddr = follow_table(mm, uaddr, write); + if (IS_ERR_VALUE(kaddr)) goto fault; - } - pfn = pte_pfn(*pte); - return (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1)); + return kaddr; fault: spin_unlock(&mm->page_table_lock); - rc = __handle_fault(uaddr, (unsigned long) pte, 0); + rc = __handle_fault(uaddr, -kaddr, write); spin_lock(&mm->page_table_lock); if (!rc) goto retry; @@ -159,11 +167,9 @@ static size_t clear_user_pt(size_t n, void __user *to) static size_t strnlen_user_pt(size_t count, const char __user *src) { - char *addr; unsigned long uaddr = (unsigned long) src; struct mm_struct *mm = current->mm; - unsigned long offset, pfn, done, len; - pte_t *pte; + unsigned long offset, done, len, kaddr; size_t len_str; if (segment_eq(get_fs(), KERNEL_DS)) @@ -172,19 +178,13 @@ static size_t strnlen_user_pt(size_t count, const char __user *src) retry: spin_lock(&mm->page_table_lock); do { - pte = follow_table(mm, uaddr); - if ((unsigned long) pte < 0x1000) - goto fault; - if (!pte_present(*pte)) { - pte = (pte_t *) 0x11; + kaddr = follow_table(mm, uaddr, 0); + if (IS_ERR_VALUE(kaddr)) goto fault; - } - pfn = pte_pfn(*pte); - offset = uaddr & (PAGE_SIZE-1); - addr = (char *)(pfn << PAGE_SHIFT) + offset; + offset = uaddr & ~PAGE_MASK; len = min(count - done, PAGE_SIZE - offset); - len_str = strnlen(addr, len); + len_str = strnlen((char *) kaddr, len); done += len_str; uaddr += len_str; } while ((len_str == len) && (done < count)); @@ -192,7 +192,7 @@ retry: return done + 1; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(uaddr, (unsigned long) pte, 0)) + if (__handle_fault(uaddr, -kaddr, 0)) return 0; goto retry; } @@ -225,11 +225,10 @@ static size_t copy_in_user_pt(size_t n, void __user *to, const void __user *from) { struct mm_struct *mm = current->mm; - unsigned long offset_from, offset_to, offset_max, pfn_from, pfn_to, - uaddr, done, size, error_code; + unsigned long offset_max, uaddr, done, size, error_code; unsigned long uaddr_from = (unsigned long) from; unsigned long uaddr_to = (unsigned long) to; - pte_t *pte_from, *pte_to; + unsigned long kaddr_to, kaddr_from; int write_user; if (segment_eq(get_fs(), KERNEL_DS)) { @@ -242,38 +241,23 @@ retry: do { write_user = 0; uaddr = uaddr_from; - pte_from = follow_table(mm, uaddr_from); - error_code = (unsigned long) pte_from; - if (error_code < 0x1000) - goto fault; - if (!pte_present(*pte_from)) { - error_code = 0x11; + kaddr_from = follow_table(mm, uaddr_from, 0); + error_code = kaddr_from; + if (IS_ERR_VALUE(error_code)) goto fault; - } write_user = 1; uaddr = uaddr_to; - pte_to = follow_table(mm, uaddr_to); - error_code = (unsigned long) pte_to; - if (error_code < 0x1000) - goto fault; - if (!pte_present(*pte_to)) { - error_code = 0x11; + kaddr_to = follow_table(mm, uaddr_to, 1); + error_code = (unsigned long) kaddr_to; + if (IS_ERR_VALUE(error_code)) goto fault; - } else if (!pte_write(*pte_to)) { - error_code = 0x04; - goto fault; - } - pfn_from = pte_pfn(*pte_from); - pfn_to = pte_pfn(*pte_to); - offset_from = uaddr_from & (PAGE_SIZE-1); - offset_to = uaddr_from & (PAGE_SIZE-1); - offset_max = max(offset_from, offset_to); + offset_max = max(uaddr_from & ~PAGE_MASK, + uaddr_to & ~PAGE_MASK); size = min(n - done, PAGE_SIZE - offset_max); - memcpy((void *)(pfn_to << PAGE_SHIFT) + offset_to, - (void *)(pfn_from << PAGE_SHIFT) + offset_from, size); + memcpy((void *) kaddr_to, (void *) kaddr_from, size); done += size; uaddr_from += size; uaddr_to += size; @@ -282,7 +266,7 @@ retry: return n - done; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(uaddr, error_code, write_user)) + if (__handle_fault(uaddr, -error_code, write_user)) return n - done; goto retry; } @@ -341,7 +325,7 @@ int futex_atomic_op_pt(int op, u32 __user *uaddr, int oparg, int *old) return __futex_atomic_op_pt(op, uaddr, oparg, old); spin_lock(¤t->mm->page_table_lock); uaddr = (u32 __force __user *) - __dat_user_addr((__force unsigned long) uaddr); + __dat_user_addr((__force unsigned long) uaddr, 1); if (!uaddr) { spin_unlock(¤t->mm->page_table_lock); return -EFAULT; @@ -378,7 +362,7 @@ int futex_atomic_cmpxchg_pt(u32 *uval, u32 __user *uaddr, return __futex_atomic_cmpxchg_pt(uval, uaddr, oldval, newval); spin_lock(¤t->mm->page_table_lock); uaddr = (u32 __force __user *) - __dat_user_addr((__force unsigned long) uaddr); + __dat_user_addr((__force unsigned long) uaddr, 1); if (!uaddr) { spin_unlock(¤t->mm->page_table_lock); return -EFAULT; -- cgit v1.2.3 From 12d7b1078bb374fc3e2955b9f2815415a66157b6 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Tue, 11 Sep 2012 15:10:58 +0200 Subject: s390/dasd: fix pathgroup race If a new path is available we need to verify the path data. If it is the first path for a device the stop bits are removed after path verification. If a pathgroup is established we need to set system characteristics for the lcu. Therefore I/O has to be started. If the device is stopped the set system characteristics worker may block the path verification worker and the device is blocked. Turn on failfast for set system characteristics CQR to prevent a deadlock with the path verification worker. If a pathgroup is established on a device that is not in use trigger path verification. Maybe we were not informed about a working path. Signed-off-by: Stefan Haberland Reviewed-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 11 +++++++++++ drivers/s390/block/dasd_eckd.c | 32 +++++++++++++++++++++++++------- 2 files changed, 36 insertions(+), 7 deletions(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 6498d15f874f..0595c763dafd 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -2157,6 +2157,7 @@ static int _dasd_sleep_on(struct dasd_ccw_req *maincqr, int interruptible) test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags) && (!dasd_eer_enabled(device))) { cqr->status = DASD_CQR_FAILED; + cqr->intrc = -EAGAIN; continue; } /* Don't try to start requests if device is stopped */ @@ -3270,6 +3271,16 @@ void dasd_generic_path_event(struct ccw_device *cdev, int *path_event) dasd_schedule_device_bh(device); } if (path_event[chp] & PE_PATHGROUP_ESTABLISHED) { + if (!(device->path_data.opm & eventlpm) && + !(device->path_data.tbvpm & eventlpm)) { + /* + * we can not establish a pathgroup on an + * unavailable path, so trigger a path + * verification first + */ + device->path_data.tbvpm |= eventlpm; + dasd_schedule_device_bh(device); + } DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Pathgroup re-established\n"); if (device->discipline->kick_validate) diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 2fb2b9ea97ec..c48c72abbefc 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -1507,7 +1507,8 @@ static struct dasd_ccw_req *dasd_eckd_build_psf_ssc(struct dasd_device *device, * call might change behaviour of DASD devices. */ static int -dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav) +dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav, + unsigned long flags) { struct dasd_ccw_req *cqr; int rc; @@ -1516,10 +1517,19 @@ dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav) if (IS_ERR(cqr)) return PTR_ERR(cqr); + /* + * set flags e.g. turn on failfast, to prevent blocking + * the calling function should handle failed requests + */ + cqr->flags |= flags; + rc = dasd_sleep_on(cqr); if (!rc) /* trigger CIO to reprobe devices */ css_schedule_reprobe(); + else if (cqr->intrc == -EAGAIN) + rc = -EAGAIN; + dasd_sfree_request(cqr, cqr->memdev); return rc; } @@ -1527,7 +1537,8 @@ dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav) /* * Valide storage server of current device. */ -static void dasd_eckd_validate_server(struct dasd_device *device) +static int dasd_eckd_validate_server(struct dasd_device *device, + unsigned long flags) { int rc; struct dasd_eckd_private *private; @@ -1536,17 +1547,18 @@ static void dasd_eckd_validate_server(struct dasd_device *device) private = (struct dasd_eckd_private *) device->private; if (private->uid.type == UA_BASE_PAV_ALIAS || private->uid.type == UA_HYPER_PAV_ALIAS) - return; + return 0; if (dasd_nopav || MACHINE_IS_VM) enable_pav = 0; else enable_pav = 1; - rc = dasd_eckd_psf_ssc(device, enable_pav); + rc = dasd_eckd_psf_ssc(device, enable_pav, flags); /* may be requested feature is not available on server, * therefore just report error and go ahead */ DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "PSF-SSC for SSID %04x " "returned rc=%d", private->uid.ssid, rc); + return rc; } /* @@ -1556,7 +1568,13 @@ static void dasd_eckd_do_validate_server(struct work_struct *work) { struct dasd_device *device = container_of(work, struct dasd_device, kick_validate); - dasd_eckd_validate_server(device); + if (dasd_eckd_validate_server(device, DASD_CQR_FLAGS_FAILFAST) + == -EAGAIN) { + /* schedule worker again if failed */ + schedule_work(&device->kick_validate); + return; + } + dasd_put_device(device); } @@ -1685,7 +1703,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device) if (rc) goto out_err2; - dasd_eckd_validate_server(device); + dasd_eckd_validate_server(device, 0); /* device may report different configuration data after LCU setup */ rc = dasd_eckd_read_conf(device); @@ -4153,7 +4171,7 @@ static int dasd_eckd_restore_device(struct dasd_device *device) rc = dasd_alias_make_device_known_to_lcu(device); if (rc) return rc; - dasd_eckd_validate_server(device); + dasd_eckd_validate_server(device, DASD_CQR_FLAGS_FAILFAST); /* RE-Read Configuration Data */ rc = dasd_eckd_read_conf(device); -- cgit v1.2.3 From 03429f34c22cedc3300a81e13d5790450cc468af Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Tue, 11 Sep 2012 17:19:12 +0200 Subject: s390/dasd: fix read unit address configuration loop Read unit address is done for all devices during online processing to read out LCU features. This is also done after disconnect/connect a LCU. Some older storage hardware does not provide the capability to read unit address configuration. This leads to a loop trying to read unit address configuration every 30 seconds. The device is still operational but logs are flooded with error messages. Fix the loop by recognizing a command reject saying that the suborder for ruac is not supported. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_alias.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index 157defe5e069..6b556995bb33 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -384,6 +384,29 @@ static void _remove_device_from_lcu(struct alias_lcu *lcu, group->next = NULL; }; +static int +suborder_not_supported(struct dasd_ccw_req *cqr) +{ + char *sense; + char reason; + char msg_format; + char msg_no; + + sense = dasd_get_sense(&cqr->irb); + if (!sense) + return 0; + + reason = sense[0]; + msg_format = (sense[7] & 0xF0); + msg_no = (sense[7] & 0x0F); + + /* command reject, Format 0 MSG 4 - invalid parameter */ + if ((reason == 0x80) && (msg_format == 0x00) && (msg_no == 0x04)) + return 1; + + return 0; +} + static int read_unit_address_configuration(struct dasd_device *device, struct alias_lcu *lcu) { @@ -435,6 +458,8 @@ static int read_unit_address_configuration(struct dasd_device *device, do { rc = dasd_sleep_on(cqr); + if (rc && suborder_not_supported(cqr)) + return -EOPNOTSUPP; } while (rc && (cqr->retries > 0)); if (rc) { spin_lock_irqsave(&lcu->lock, flags); @@ -521,7 +546,7 @@ static void lcu_update_work(struct work_struct *work) * processing the data */ spin_lock_irqsave(&lcu->lock, flags); - if (rc || (lcu->flags & NEED_UAC_UPDATE)) { + if ((rc && (rc != -EOPNOTSUPP)) || (lcu->flags & NEED_UAC_UPDATE)) { DBF_DEV_EVENT(DBF_WARNING, device, "could not update" " alias data in lcu (rc = %d), retry later", rc); schedule_delayed_work(&lcu->ruac_data.dwork, 30*HZ); -- cgit v1.2.3 From 5b5896e4e1f353ef3dbc4e4e9ee44d53ccf105d7 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 11 Sep 2012 12:37:55 +0200 Subject: drm/i915: enable lvds pin pairs before dpll on gen2 Otherwise things migt not work too well. Breakage introduced in commit eb1cbe4848b01f9f073064377875bc7d71eb401b Author: Daniel Vetter Date: Wed Mar 28 23:12:16 2012 +0200 drm/i915: split PLL update code out of i9xx_crtc_mode_set Cc: Jesse Barnes Cc: stable@vger.kernel.org (for 3.5 only) Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bc2ad348e5d8..c040aee1341c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4191,12 +4191,6 @@ static void i8xx_update_pll(struct drm_crtc *crtc, POSTING_READ(DPLL(pipe)); udelay(150); - I915_WRITE(DPLL(pipe), dpll); - - /* Wait for the clocks to stabilize. */ - POSTING_READ(DPLL(pipe)); - udelay(150); - /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. @@ -4204,6 +4198,12 @@ static void i8xx_update_pll(struct drm_crtc *crtc, if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) intel_update_lvds(crtc, clock, adjusted_mode); + I915_WRITE(DPLL(pipe), dpll); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(DPLL(pipe)); + udelay(150); + /* The pixel multiplier can only be updated once the * DPLL is enabled and the clocks are stable. * -- cgit v1.2.3 From 7e81a42e341a4f15d76624b7c02ffb21b085b56f Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 15 Sep 2012 09:41:57 +0100 Subject: drm/i915: Reduce a pin-leak BUG into a WARN Pin-leaks persist and we get the perennial bug reports of machine lockups to the BUG_ON(pin_count==MAX). If we instead loudly report that the object cannot be pinned at that time it should prevent the driver from locking up, and hopefully restore a semblance of working whilst still leaving us a OOPS to debug. Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 489e2b162b27..274d25de521e 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3242,7 +3242,8 @@ i915_gem_object_pin(struct drm_i915_gem_object *obj, { int ret; - BUG_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT); + if (WARN_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT)) + return -EBUSY; if (obj->gtt_space != NULL) { if ((alignment && obj->gtt_offset & (alignment - 1)) || -- cgit v1.2.3 From b98b60167279df3acac9422c3c9820d9ebbcf9fb Mon Sep 17 00:00:00 2001 From: Wang Xingchao Date: Thu, 13 Sep 2012 07:43:22 +0800 Subject: drm/i915: HDMI - Clear Audio Enable bit for Hot Plug Clear Audio Enable bit to trigger unsolicated event to notify Audio Driver part the HDMI hot plug change. The patch fixed the bug when remove HDMI cable the bit was not cleared correctly. In intel_hdmi_dpms(), if intel_hdmi->has_audio been true, the "Audio enable bit" will be set to trigger unsolicated event to notify Alsa driver the change. intel_hdmi->has_audio will be reset to false from intel_hdmi_detect() after remove the hdmi cable, here's debug log: [ 187.494153] [drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 1 to 2 [ 187.525349] [drm:intel_hdmi_detect], HDMI: has_audio = 0 so when comes back to intel_hdmi_dpms(), the "Audio enable bit" will not be cleared. And this cause the eld infomation and pin presence doesnot update accordingly in alsa driver side. This patch will also trigger unsolicated event to alsa driver to notify the hot plug event: [ 187.853159] ALSA sound/pci/hda/patch_hdmi.c:772 HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1 [ 187.853268] ALSA sound/pci/hda/patch_hdmi.c:990 HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 Signed-off-by: Wang Xingchao Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 98f602427eb8..12dc3308ab8c 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -609,7 +609,7 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode) u32 temp; u32 enable_bits = SDVO_ENABLE; - if (intel_hdmi->has_audio) + if (intel_hdmi->has_audio || mode != DRM_MODE_DPMS_ON) enable_bits |= SDVO_AUDIO_ENABLE; temp = I915_READ(intel_hdmi->sdvox_reg); -- cgit v1.2.3 From 51ac51a6a5ab5f0aff46c4757ba4c32f3f8f7a2e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 13 Sep 2012 12:40:26 +0200 Subject: ARM: at91: fix missing #interrupt-cells on gpio-controller Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Tested-by: Bo Shen Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9260.dtsi | 3 +++ arch/arm/boot/dts/at91sam9263.dtsi | 5 +++++ arch/arm/boot/dts/at91sam9g45.dtsi | 5 +++++ arch/arm/boot/dts/at91sam9n12.dtsi | 4 ++++ arch/arm/boot/dts/at91sam9x5.dtsi | 4 ++++ 5 files changed, 21 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 66389c1c6f62..7c95f76398de 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -104,6 +104,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -113,6 +114,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -122,6 +124,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index b460d6ce9eb5..195019b7ca0e 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -95,6 +95,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff400 { @@ -104,6 +105,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff600 { @@ -113,6 +115,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffff800 { @@ -122,6 +125,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioE: gpio@fffffa00 { @@ -131,6 +135,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@ffffee00 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index bafa8806fc17..63751b1e744b 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -113,6 +113,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff400 { @@ -122,6 +123,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff600 { @@ -131,6 +133,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffff800 { @@ -140,6 +143,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioE: gpio@fffffa00 { @@ -149,6 +153,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@ffffee00 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index bfac0dfc332c..ef9336ae9614 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -107,6 +107,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -116,6 +117,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -125,6 +127,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffffa00 { @@ -134,6 +137,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 4a18c393b136..8a387a8d61b7 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -115,6 +115,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -124,6 +125,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -133,6 +135,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffffa00 { @@ -142,6 +145,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { -- cgit v1.2.3 From d6532207116307eb7ecbfa7b9e02c53230096a50 Mon Sep 17 00:00:00 2001 From: Eddie Wai Date: Tue, 21 Aug 2012 10:35:53 -0700 Subject: [SCSI] bnx2i: Fixed NULL ptr deference for 1G bnx2 Linux iSCSI offload This patch fixes the following kernel panic invoked by uninitialized fields in the chip initialization for the 1G bnx2 iSCSI offload. One of the bits in the chip initialization is being used by the latest firmware to control overflow packets. When this control bit gets enabled erroneously, it would ultimately result in a bad packet placement which would cause the bnx2 driver to dereference a NULL ptr in the placement handler. This can happen under certain stress I/O environment under the Linux iSCSI offload operation. This change only affects Broadcom's 5709 chipset. Unable to handle kernel NULL pointer dereference at 0000000000000008 RIP: [] :bnx2:bnx2_poll_work+0xd0d/0x13c5 Pid: 0, comm: swapper Tainted: G ---- 2.6.18-333.el5debug #2 RIP: 0010:[] [] :bnx2:bnx2_poll_work+0xd0d/0x13c5 RSP: 0018:ffff8101b575bd50 EFLAGS: 00010216 RAX: 0000000000000005 RBX: ffff81007c5fb180 RCX: 0000000000000000 RDX: 0000000000000ffc RSI: 00000000817e8000 RDI: 0000000000000220 RBP: ffff81015bbd7ec0 R08: ffff8100817e9000 R09: 0000000000000000 R10: ffff81007c5fb180 R11: 00000000000000c8 R12: 000000007a25a010 R13: 0000000000000000 R14: 0000000000000005 R15: ffff810159f80558 FS: 0000000000000000(0000) GS:ffff8101afebc240(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000008 CR3: 0000000000201000 CR4: 00000000000006a0 Process swapper (pid: 0, threadinfo ffff8101b5754000, task ffff8101afebd820) Stack: 000000000000000b ffff810159f80000 0000000000000040 ffff810159f80520 ffff810159f80500 00cf00cf8008e84b ffffc200100939e0 ffff810009035b20 0000502900000000 000000be00000001 ffff8100817e7810 00d08101b575bea8 Call Trace: [] show_schedstat+0x1c2/0x25b [] :bnx2:bnx2_poll+0xf6/0x231 [] net_rx_action+0xac/0x1b1 [] __do_softirq+0x89/0x133 [] call_softirq+0x1c/0x28 [] do_softirq+0x2c/0x7d [] do_IRQ+0xee/0xf7 [] ret_from_intr+0x0/0xa [] acpi_processor_idle_simple+0x1c5/0x341 [] acpi_processor_idle_simple+0x182/0x341 [] acpi_processor_idle_simple+0x0/0x341 [] cpu_idle+0x95/0xb8 [] start_secondary+0x479/0x488 Signed-off-by: Eddie Wai Cc: stable@vger.kernel.org Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_hwi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 33d6630529de..91eec60252ee 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -1264,6 +1264,9 @@ int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba) int rc = 0; u64 mask64; + memset(&iscsi_init, 0x00, sizeof(struct iscsi_kwqe_init1)); + memset(&iscsi_init2, 0x00, sizeof(struct iscsi_kwqe_init2)); + bnx2i_adjust_qp_size(hba); iscsi_init.flags = -- cgit v1.2.3 From 10cce6d8b5af0b32bc4254ae4a28423a74c0921c Mon Sep 17 00:00:00 2001 From: sreekanth.reddy@lsi.com Date: Wed, 22 Aug 2012 16:55:13 +0530 Subject: [SCSI] mpt2sas: Fix for issue - Unable to boot from the drive connected to HBA This patch checks whether HBA is SAS2008 B0 controller. if it is a SAS2008 B0 controller then it use IO-APIC interrupt instead of MSIX, as SAS2008 B0 controller doesn't support MSIX interrupts. [jejb: fix whitespace problems] Signed-off-by: Sreekanth Reddy Cc: Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index b25757d1e91b..9d5a56c4b332 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -1209,6 +1209,13 @@ _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc) u16 message_control; + /* Check whether controller SAS2008 B0 controller, + if it is SAS2008 B0 controller use IO-APIC instead of MSIX */ + if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 && + ioc->pdev->revision == 0x01) { + return -EINVAL; + } + base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX); if (!base) { dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not " -- cgit v1.2.3 From 6bf6104573482570f7103d3e5ddf9574db43a363 Mon Sep 17 00:00:00 2001 From: Francesco Ruggeri Date: Thu, 13 Sep 2012 15:03:37 -0700 Subject: fs/proc: fix potential unregister_sysctl_table hang The unregister_sysctl_table() function hangs if all references to its ctl_table_header structure are not dropped. This can happen sometimes because of a leak in proc_sys_lookup(): proc_sys_lookup() gets a reference to the table via lookup_entry(), but it does not release it when a subsequent call to sysctl_follow_link() fails. This patch fixes this leak by making sure the reference is always dropped on return. See also commit 076c3eed2c31 ("sysctl: Rewrite proc_sys_lookup introducing find_entry and lookup_entry") which reorganized this code in 3.4. Tested in Linux 3.4.4. Signed-off-by: Francesco Ruggeri Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- fs/proc/proc_sysctl.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c index dfafeb2b05a0..eb7cc91b7258 100644 --- a/fs/proc/proc_sysctl.c +++ b/fs/proc/proc_sysctl.c @@ -462,9 +462,6 @@ static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry, err = ERR_PTR(-ENOMEM); inode = proc_sys_make_inode(dir->i_sb, h ? h : head, p); - if (h) - sysctl_head_finish(h); - if (!inode) goto out; @@ -473,6 +470,8 @@ static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry, d_add(dentry, inode); out: + if (h) + sysctl_head_finish(h); sysctl_head_finish(head); return err; } -- cgit v1.2.3 From 2f1f4d9b60396d2df4cff829bd5376ffc8ed9a2c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 17 Sep 2012 17:26:24 -0400 Subject: Revert "drm/radeon: rework pll selection (v3)" This reverts commit 985f61f7ee647ad570c05eab0b74915da2ac8e19. This commit fixed certain cases, but ended up regressing others due to limitations in the current KMS API. A proper fix is too invasive for 3.6. Push it back to 3.7. Reported-by: Andres Freund Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/atombios_crtc.c | 163 +++++++-------------------------- 1 file changed, 34 insertions(+), 129 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index e721e3087b99..2817101fb167 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1479,98 +1479,14 @@ static void radeon_legacy_atom_fixup(struct drm_crtc *crtc) } } -/** - * radeon_get_pll_use_mask - look up a mask of which pplls are in use - * - * @crtc: drm crtc - * - * Returns the mask of which PPLLs (Pixel PLLs) are in use. - */ -static u32 radeon_get_pll_use_mask(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_crtc *test_crtc; - struct radeon_crtc *radeon_test_crtc; - u32 pll_in_use = 0; - - list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) { - if (crtc == test_crtc) - continue; - - radeon_test_crtc = to_radeon_crtc(test_crtc); - if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID) - pll_in_use |= (1 << radeon_test_crtc->pll_id); - } - return pll_in_use; -} - -/** - * radeon_get_shared_dp_ppll - return the PPLL used by another crtc for DP - * - * @crtc: drm crtc - * - * Returns the PPLL (Pixel PLL) used by another crtc/encoder which is - * also in DP mode. For DP, a single PPLL can be used for all DP - * crtcs/encoders. - */ -static int radeon_get_shared_dp_ppll(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_encoder *test_encoder; - struct radeon_crtc *radeon_test_crtc; - - list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) { - if (test_encoder->crtc && (test_encoder->crtc != crtc)) { - if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) { - /* for DP use the same PLL for all */ - radeon_test_crtc = to_radeon_crtc(test_encoder->crtc); - if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID) - return radeon_test_crtc->pll_id; - } - } - } - return ATOM_PPLL_INVALID; -} - -/** - * radeon_atom_pick_pll - Allocate a PPLL for use by the crtc. - * - * @crtc: drm crtc - * - * Returns the PPLL (Pixel PLL) to be used by the crtc. For DP monitors - * a single PPLL can be used for all DP crtcs/encoders. For non-DP - * monitors a dedicated PPLL must be used. If a particular board has - * an external DP PLL, return ATOM_PPLL_INVALID to skip PLL programming - * as there is no need to program the PLL itself. If we are not able to - * allocate a PLL, return ATOM_PPLL_INVALID to skip PLL programming to - * avoid messing up an existing monitor. - * - * Asic specific PLL information - * - * DCE 6.1 - * - PPLL2 is only available to UNIPHYA (both DP and non-DP) - * - PPLL0, PPLL1 are available for UNIPHYB/C/D/E/F (both DP and non-DP) - * - * DCE 6.0 - * - PPLL0 is available to all UNIPHY (DP only) - * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC - * - * DCE 5.0 - * - DCPLL is available to all UNIPHY (DP only) - * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC - * - * DCE 3.0/4.0/4.1 - * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC - * - */ static int radeon_atom_pick_pll(struct drm_crtc *crtc) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; struct drm_encoder *test_encoder; - u32 pll_in_use; - int pll; + struct drm_crtc *test_crtc; + uint32_t pll_in_use = 0; if (ASIC_IS_DCE61(rdev)) { list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) { @@ -1582,40 +1498,32 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) if ((test_radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_UNIPHY) && - (dig->linkb == false)) - /* UNIPHY A uses PPLL2 */ + (dig->linkb == false)) /* UNIPHY A uses PPLL2 */ return ATOM_PPLL2; - else if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) { - /* UNIPHY B/C/D/E/F */ - if (rdev->clock.dp_extclk) - /* skip PPLL programming if using ext clock */ - return ATOM_PPLL_INVALID; - else { - /* use the same PPLL for all DP monitors */ - pll = radeon_get_shared_dp_ppll(crtc); - if (pll != ATOM_PPLL_INVALID) - return pll; - } - } - break; } } /* UNIPHY B/C/D/E/F */ - pll_in_use = radeon_get_pll_use_mask(crtc); - if (!(pll_in_use & (1 << ATOM_PPLL0))) + list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) { + struct radeon_crtc *radeon_test_crtc; + + if (crtc == test_crtc) + continue; + + radeon_test_crtc = to_radeon_crtc(test_crtc); + if ((radeon_test_crtc->pll_id == ATOM_PPLL0) || + (radeon_test_crtc->pll_id == ATOM_PPLL1)) + pll_in_use |= (1 << radeon_test_crtc->pll_id); + } + if (!(pll_in_use & 4)) return ATOM_PPLL0; - if (!(pll_in_use & (1 << ATOM_PPLL1))) - return ATOM_PPLL1; - DRM_ERROR("unable to allocate a PPLL\n"); - return ATOM_PPLL_INVALID; + return ATOM_PPLL1; } else if (ASIC_IS_DCE4(rdev)) { list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) { if (test_encoder->crtc && (test_encoder->crtc == crtc)) { /* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock, * depending on the asic: * DCE4: PPLL or ext clock - * DCE5: PPLL, DCPLL, or ext clock - * DCE6: PPLL, PPLL0, or ext clock + * DCE5: DCPLL or ext clock * * Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip * PPLL/DCPLL programming and only program the DP DTO for the @@ -1623,34 +1531,31 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) */ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) { if (rdev->clock.dp_extclk) - /* skip PPLL programming if using ext clock */ return ATOM_PPLL_INVALID; else if (ASIC_IS_DCE6(rdev)) - /* use PPLL0 for all DP */ return ATOM_PPLL0; else if (ASIC_IS_DCE5(rdev)) - /* use DCPLL for all DP */ return ATOM_DCPLL; - else { - /* use the same PPLL for all DP monitors */ - pll = radeon_get_shared_dp_ppll(crtc); - if (pll != ATOM_PPLL_INVALID) - return pll; - } } - break; } } - /* all other cases */ - pll_in_use = radeon_get_pll_use_mask(crtc); - if (!(pll_in_use & (1 << ATOM_PPLL2))) - return ATOM_PPLL2; - if (!(pll_in_use & (1 << ATOM_PPLL1))) + + /* otherwise, pick one of the plls */ + list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) { + struct radeon_crtc *radeon_test_crtc; + + if (crtc == test_crtc) + continue; + + radeon_test_crtc = to_radeon_crtc(test_crtc); + if ((radeon_test_crtc->pll_id >= ATOM_PPLL1) && + (radeon_test_crtc->pll_id <= ATOM_PPLL2)) + pll_in_use |= (1 << radeon_test_crtc->pll_id); + } + if (!(pll_in_use & 1)) return ATOM_PPLL1; - DRM_ERROR("unable to allocate a PPLL\n"); - return ATOM_PPLL_INVALID; + return ATOM_PPLL2; } else - /* use PPLL1 or PPLL2 */ return radeon_crtc->crtc_id; } @@ -1792,7 +1697,7 @@ static void atombios_crtc_disable(struct drm_crtc *crtc) break; } done: - radeon_crtc->pll_id = ATOM_PPLL_INVALID; + radeon_crtc->pll_id = -1; } static const struct drm_crtc_helper_funcs atombios_helper_funcs = { @@ -1841,6 +1746,6 @@ void radeon_atombios_init_crtc(struct drm_device *dev, else radeon_crtc->crtc_offset = 0; } - radeon_crtc->pll_id = ATOM_PPLL_INVALID; + radeon_crtc->pll_id = -1; drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs); } -- cgit v1.2.3 From 4e21f4eaa49f78d3e977e316514c941053871c76 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 11 Sep 2012 13:39:08 -0700 Subject: hwmon: (ads7871) Add 'name' sysfs attribute The 'name' sysfs attribute is mandatory for hwmon devices, but was missing in this driver. Cc: Paul Thomas Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Acked-by: Paul Thomas --- drivers/hwmon/ads7871.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c index e65c6e45d36b..7bf4ce3d405e 100644 --- a/drivers/hwmon/ads7871.c +++ b/drivers/hwmon/ads7871.c @@ -139,6 +139,12 @@ static ssize_t show_voltage(struct device *dev, } } +static ssize_t ads7871_show_name(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + return sprintf(buf, "%s\n", to_spi_device(dev)->modalias); +} + static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_voltage, NULL, 0); static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 1); static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 2); @@ -148,6 +154,8 @@ static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 5); static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 6); static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 7); +static DEVICE_ATTR(name, S_IRUGO, ads7871_show_name, NULL); + static struct attribute *ads7871_attributes[] = { &sensor_dev_attr_in0_input.dev_attr.attr, &sensor_dev_attr_in1_input.dev_attr.attr, @@ -157,6 +165,7 @@ static struct attribute *ads7871_attributes[] = { &sensor_dev_attr_in5_input.dev_attr.attr, &sensor_dev_attr_in6_input.dev_attr.attr, &sensor_dev_attr_in7_input.dev_attr.attr, + &dev_attr_name.attr, NULL }; -- cgit v1.2.3 From 18b48d5873a6fc8e0e6044ddb572fcda26988f19 Mon Sep 17 00:00:00 2001 From: Wen Congyang Date: Mon, 17 Sep 2012 14:08:55 -0700 Subject: memory hotplug: reset pgdat->kswapd to NULL if creating kernel thread fails If kthread_run() fails, pgdat->kswapd contains errno. When we stop this thread, we only check whether pgdat->kswapd is NULL and access it. If it contains errno, it will cause page fault. Reset pgdat->kswapd to NULL when creating kernel thread fails can avoid this problem. Signed-off-by: Wen Congyang Reviewed-by: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/vmscan.c b/mm/vmscan.c index 8d01243d9560..99b434b674c0 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -3102,6 +3102,7 @@ int kswapd_run(int nid) /* failure at boot is fatal */ BUG_ON(system_state == SYSTEM_BOOTING); printk("Failed to start kswapd on node %d\n",nid); + pgdat->kswapd = NULL; ret = -1; } return ret; -- cgit v1.2.3 From 05cf96398e1b6502f9e191291b715c7463c9d5dd Mon Sep 17 00:00:00 2001 From: Jianguo Wu Date: Mon, 17 Sep 2012 14:08:56 -0700 Subject: mm/ia64: fix a memory block size bug I found following definition in include/linux/memory.h, in my IA64 platform, SECTION_SIZE_BITS is equal to 32, and MIN_MEMORY_BLOCK_SIZE will be 0. #define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS) Because MIN_MEMORY_BLOCK_SIZE is int type and length of 32bits, so MIN_MEMORY_BLOCK_SIZE(1 << 32) will will equal to 0. Actually when SECTION_SIZE_BITS >= 31, MIN_MEMORY_BLOCK_SIZE will be wrong. This will cause wrong system memory infomation in sysfs. I think it should be: #define MIN_MEMORY_BLOCK_SIZE (1UL << SECTION_SIZE_BITS) And "echo offline > memory0/state" will cause following call trace: kernel BUG at mm/memory_hotplug.c:885! sh[6455]: bugcheck! 0 [1] Pid: 6455, CPU 0, comm: sh psr : 0000101008526030 ifs : 8000000000000fa4 ip : [] Not tainted (3.6.0-rc1) ip is at offline_pages+0x210/0xee0 Call Trace: show_stack+0x80/0xa0 show_regs+0x640/0x920 die+0x190/0x2c0 die_if_kernel+0x50/0x80 ia64_bad_break+0x3d0/0x6e0 ia64_native_leave_kernel+0x0/0x270 offline_pages+0x210/0xee0 alloc_pages_current+0x180/0x2a0 Signed-off-by: Jianguo Wu Signed-off-by: Jiang Liu Cc: "Luck, Tony" Reviewed-by: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memory.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/memory.h b/include/linux/memory.h index 1ac7f6e405f9..ff9a9f8e0ed9 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -19,7 +19,7 @@ #include #include -#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS) +#define MIN_MEMORY_BLOCK_SIZE (1UL << SECTION_SIZE_BITS) struct memory_block { unsigned long start_section_nr; -- cgit v1.2.3 From e9b7d7c81d9bdb41a897a2983ae3386a5fd4a1e3 Mon Sep 17 00:00:00 2001 From: Gang Wei Date: Mon, 17 Sep 2012 14:08:59 -0700 Subject: MAINTAINERS: fix TXT maintainer list and source repo path Signed-off-by: Gang Wei Cc: Richard L Maliszewski Cc: Gang Wei Cc: Shane Wang Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 53cc13c82cb1..b17587d9412f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3666,11 +3666,12 @@ F: Documentation/networking/README.ipw2200 F: drivers/net/wireless/ipw2x00/ INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT) -M: Joseph Cihula +M: Richard L Maliszewski +M: Gang Wei M: Shane Wang L: tboot-devel@lists.sourceforge.net W: http://tboot.sourceforge.net -T: Mercurial http://www.bughost.org/repos.hg/tboot.hg +T: hg http://tboot.hg.sourceforge.net:8000/hgroot/tboot/tboot S: Supported F: Documentation/intel_txt.txt F: include/linux/tboot.h -- cgit v1.2.3 From fded4e090c60100d709318896c79816d68d5b47d Mon Sep 17 00:00:00 2001 From: Paul Clements Date: Mon, 17 Sep 2012 14:09:02 -0700 Subject: nbd: clear waiting_queue on shutdown Fix a serious but uncommon bug in nbd which occurs when there is heavy I/O going to the nbd device while, at the same time, a failure (server, network) or manual disconnect of the nbd connection occurs. There is a small window between the time that the nbd_thread is stopped and the socket is shutdown where requests can continue to be queued to nbd's internal waiting_queue. When this happens, those requests are never completed or freed. The fix is to clear the waiting_queue on shutdown of the nbd device, in the same way that the nbd request queue (queue_head) is already being cleared. Signed-off-by: Paul Clements Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/nbd.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index d07c9f7fded6..0c03411c59eb 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -449,6 +449,14 @@ static void nbd_clear_que(struct nbd_device *nbd) req->errors++; nbd_end_request(req); } + + while (!list_empty(&nbd->waiting_queue)) { + req = list_entry(nbd->waiting_queue.next, struct request, + queuelist); + list_del_init(&req->queuelist); + req->errors++; + nbd_end_request(req); + } } @@ -598,6 +606,7 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, nbd->file = NULL; nbd_clear_que(nbd); BUG_ON(!list_empty(&nbd->queue_head)); + BUG_ON(!list_empty(&nbd->waiting_queue)); if (file) fput(file); return 0; -- cgit v1.2.3 From 30c29bea6af2d3b6ffc8865864de7fc08cadb5df Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 17 Sep 2012 14:09:03 -0700 Subject: slab: do ClearSlabPfmemalloc() for all pages of slab Right now, we call ClearSlabPfmemalloc() for first page of slab when we clear SlabPfmemalloc flag. This is fine for most swap-over-network use cases as it is expected that order-0 pages are in use. Unfortunately it is possible that that __ac_put_obj() checks SlabPfmemalloc on a tail page and while this is harmless, it is sloppy. This patch ensures that the head page is always used. This problem was originally identified by Joonsoo Kim. [js1304@gmail.com: Original implementation and problem identification] Signed-off-by: Mel Gorman Cc: David Miller Cc: Chuck Lever Cc: Joonsoo Kim Cc: David Rientjes Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slab.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/slab.c b/mm/slab.c index 811af03a14ef..d34a9034f929 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -1000,7 +1000,7 @@ static void *__ac_get_obj(struct kmem_cache *cachep, struct array_cache *ac, l3 = cachep->nodelists[numa_mem_id()]; if (!list_empty(&l3->slabs_free) && force_refill) { struct slab *slabp = virt_to_slab(objp); - ClearPageSlabPfmemalloc(virt_to_page(slabp->s_mem)); + ClearPageSlabPfmemalloc(virt_to_head_page(slabp->s_mem)); clear_obj_pfmemalloc(&objp); recheck_pfmemalloc_active(cachep, ac); return objp; @@ -1032,7 +1032,7 @@ static void *__ac_put_obj(struct kmem_cache *cachep, struct array_cache *ac, { if (unlikely(pfmemalloc_active)) { /* Some pfmemalloc slabs exist, check if this is one */ - struct page *page = virt_to_page(objp); + struct page *page = virt_to_head_page(objp); if (PageSlabPfmemalloc(page)) set_obj_pfmemalloc(&objp); } -- cgit v1.2.3 From d014dc2ed4fae84cb92509416c8bfc9078d4f0d9 Mon Sep 17 00:00:00 2001 From: Joonsoo Kim Date: Mon, 17 Sep 2012 14:09:06 -0700 Subject: slab: fix starting index for finding another object In array cache, there is a object at index 0, check it. Signed-off-by: Joonsoo Kim Signed-off-by: Mel Gorman Cc: David Miller Cc: Chuck Lever Cc: David Rientjes Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slab.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/slab.c b/mm/slab.c index d34a9034f929..c6854759bcf1 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -983,7 +983,7 @@ static void *__ac_get_obj(struct kmem_cache *cachep, struct array_cache *ac, } /* The caller cannot use PFMEMALLOC objects, find another one */ - for (i = 1; i < ac->avail; i++) { + for (i = 0; i < ac->avail; i++) { /* If a !PFMEMALLOC object is found, swap them */ if (!is_obj_pfmemalloc(ac->entry[i])) { objp = ac->entry[i]; -- cgit v1.2.3 From 8ba00bb68a067c221cc3ea3a0293e8fcbdcb7ba1 Mon Sep 17 00:00:00 2001 From: Joonsoo Kim Date: Mon, 17 Sep 2012 14:09:09 -0700 Subject: slub: consider pfmemalloc_match() in get_partial_node() get_partial() is currently not checking pfmemalloc_match() meaning that it is possible for pfmemalloc pages to leak to non-pfmemalloc users. This is a problem in the following situation. Assume that there is a request from normal allocation and there are no objects in the per-cpu cache and no node-partial slab. In this case, slab_alloc enters the slow path and new_slab_objects() is called which may return a PFMEMALLOC page. As the current user is not allowed to access PFMEMALLOC page, deactivate_slab() is called ([5091b74a: mm: slub: optimise the SLUB fast path to avoid pfmemalloc checks]) and returns an object from PFMEMALLOC page. Next time, when we get another request from normal allocation, slab_alloc() enters the slow-path and calls new_slab_objects(). In new_slab_objects(), we call get_partial() and get a partial slab which was just deactivated but is a pfmemalloc page. We extract one object from it and re-deactivate. "deactivate -> re-get in get_partial -> re-deactivate" occures repeatedly. As a result, access to PFMEMALLOC page is not properly restricted and it can cause a performance degradation due to frequent deactivation. deactivation frequently. This patch changes get_partial_node() to take pfmemalloc_match() into account and prevents the "deactivate -> re-get in get_partial() scenario. Instead, new_slab() is called. Signed-off-by: Joonsoo Kim Acked-by: David Rientjes Signed-off-by: Mel Gorman Cc: David Miller Cc: Chuck Lever Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slub.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index 8f78e2577031..2fdd96f9e998 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1524,12 +1524,13 @@ static inline void *acquire_slab(struct kmem_cache *s, } static int put_cpu_partial(struct kmem_cache *s, struct page *page, int drain); +static inline bool pfmemalloc_match(struct page *page, gfp_t gfpflags); /* * Try to allocate a partial slab from a specific node. */ -static void *get_partial_node(struct kmem_cache *s, - struct kmem_cache_node *n, struct kmem_cache_cpu *c) +static void *get_partial_node(struct kmem_cache *s, struct kmem_cache_node *n, + struct kmem_cache_cpu *c, gfp_t flags) { struct page *page, *page2; void *object = NULL; @@ -1545,9 +1546,13 @@ static void *get_partial_node(struct kmem_cache *s, spin_lock(&n->list_lock); list_for_each_entry_safe(page, page2, &n->partial, lru) { - void *t = acquire_slab(s, n, page, object == NULL); + void *t; int available; + if (!pfmemalloc_match(page, flags)) + continue; + + t = acquire_slab(s, n, page, object == NULL); if (!t) break; @@ -1614,7 +1619,7 @@ static void *get_any_partial(struct kmem_cache *s, gfp_t flags, if (n && cpuset_zone_allowed_hardwall(zone, flags) && n->nr_partial > s->min_partial) { - object = get_partial_node(s, n, c); + object = get_partial_node(s, n, c, flags); if (object) { /* * Return the object even if @@ -1643,7 +1648,7 @@ static void *get_partial(struct kmem_cache *s, gfp_t flags, int node, void *object; int searchnode = (node == NUMA_NO_NODE) ? numa_node_id() : node; - object = get_partial_node(s, get_node(s, searchnode), c); + object = get_partial_node(s, get_node(s, searchnode), c, flags); if (object || node != NUMA_NO_NODE) return object; -- cgit v1.2.3 From 35c448a8a3471b95ebc0ebcf91eb1183401b4274 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 17 Sep 2012 14:09:11 -0700 Subject: include/net/sock.h: squelch compiler warning in sk_rmem_schedule() This warning: In file included from linux/include/linux/tcp.h:227:0, from linux/include/linux/ipv6.h:221, from linux/include/net/ipv6.h:16, from linux/include/linux/sunrpc/clnt.h:26, from linux/net/sunrpc/stats.c:22: linux/include/net/sock.h: In function `sk_rmem_schedule': linux/nfs-2.6/include/net/sock.h:1339:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] is seen with gcc (GCC) 4.6.3 20120306 (Red Hat 4.6.3-2) using the -Wextra option. Commit c76562b6709f ("netvm: prevent a stream-specific deadlock") accidentally replaced the "size" parameter of sk_rmem_schedule() with an unsigned int. This changes the semantics of the comparison in the return statement. In sk_wmem_schedule we have syntactically the same comparison, but "size" is a signed integer. In addition, __sk_mem_schedule() takes a signed integer for its "size" parameter, so there is an implicit type conversion in sk_rmem_schedule() anyway. Revert the "size" parameter back to a signed integer so that the semantics of the expressions in both sk_[rw]mem_schedule() are exactly the same. Signed-off-by: Chuck Lever Signed-off-by: Mel Gorman Cc: David Miller Cc: Joonsoo Kim Cc: David Rientjes Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/net/sock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/sock.h b/include/net/sock.h index 72132aef53fc..adb7da20b5a1 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1332,7 +1332,7 @@ static inline bool sk_wmem_schedule(struct sock *sk, int size) } static inline bool -sk_rmem_schedule(struct sock *sk, struct sk_buff *skb, unsigned int size) +sk_rmem_schedule(struct sock *sk, struct sk_buff *skb, int size) { if (!sk_has_account(sk)) return true; -- cgit v1.2.3 From 579035dc5ddd6d48fd8529e7358b03d911ab9d8a Mon Sep 17 00:00:00 2001 From: Andrew Vagin Date: Mon, 17 Sep 2012 14:09:12 -0700 Subject: pid-namespace: limit value of ns_last_pid to (0, max_pid) The kernel doesn't check the pid for negative values, so if you try to write -2 to /proc/sys/kernel/ns_last_pid, you will get a kernel panic. The crash happens because the next pid is -1, and alloc_pidmap() will try to access to a nonexistent pidmap. map = &pid_ns->pidmap[pid/BITS_PER_PAGE]; Signed-off-by: Andrew Vagin Acked-by: Cyrill Gorcunov Acked-by: Oleg Nesterov Cc: Eric W. Biederman Cc: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/pid_namespace.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index b3c7fd554250..6144bab8fd8e 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -232,15 +232,19 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, */ tmp.data = ¤t->nsproxy->pid_ns->last_pid; - return proc_dointvec(&tmp, write, buffer, lenp, ppos); + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); } +extern int pid_max; +static int zero = 0; static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", .maxlen = sizeof(int), .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, + .extra1 = &zero, + .extra2 = &pid_max, }, { } }; -- cgit v1.2.3 From 9a858dc7cebce01a7bb616bebb85087fa2b40871 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 17 Sep 2012 14:09:15 -0700 Subject: compiler.h: add __visible gcc 4.6+ has support for a externally_visible attribute that prevents the optimizer from optimizing unused symbols away. Add a __visible macro to use it with that compiler version or later. This is used (at least) by the "Link Time Optimization" patchset. Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/compiler-gcc4.h | 7 +++++++ include/linux/compiler.h | 4 ++++ 2 files changed, 11 insertions(+) diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h index 2f4079175afb..934bc34d5f99 100644 --- a/include/linux/compiler-gcc4.h +++ b/include/linux/compiler-gcc4.h @@ -49,6 +49,13 @@ #endif #endif +#if __GNUC_MINOR__ >= 6 +/* + * Tell the optimizer that something else uses this function or variable. + */ +#define __visible __attribute__((externally_visible)) +#endif + #if __GNUC_MINOR__ > 0 #define __compiletime_object_size(obj) __builtin_object_size(obj, 0) #endif diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 923d093c9cea..f430e4162f41 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -278,6 +278,10 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); # define __section(S) __attribute__ ((__section__(#S))) #endif +#ifndef __visible +#define __visible +#endif + /* Are two types/vars the same type (ignoring qualifiers)? */ #ifndef __same_type # define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b)) -- cgit v1.2.3 From 8dcebaa9a0ae8a0487f4342f3d56d2cb1c980860 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 17 Sep 2012 14:09:17 -0700 Subject: drivers/rtc/rtc-twl.c: ensure all interrupts are disabled during probe On some platforms, bootloaders are known to do some interesting RTC programming. Without going into the obscurities as to why this may be the case, suffice it to say the the driver should not make any assumptions about the state of the RTC when the driver loads. In particular, the driver probe should be sure that all interrupts are disabled until otherwise programmed. This was discovered when finding bursty I2C traffic every second on Overo platforms. This I2C overhead was keeping the SoC from hitting deep power states. The cause was found to be the RTC firing every second on the I2C-connected TWL PMIC. Special thanks to Felipe Balbi for suggesting to look for a rogue driver as the source of the I2C traffic rather than the I2C driver itself. Special thanks to Steve Sakoman for helping track down the source of the continuous RTC interrups on the Overo boards. Signed-off-by: Kevin Hilman Cc: Felipe Balbi Tested-by: Steve Sakoman Cc: Alessandro Zummo Tested-by: Shubhrajyoti Datta Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-twl.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index c5d06fe83bba..9277d945bf48 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -495,6 +495,11 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev) if (ret < 0) goto out1; + /* ensure interrupts are disabled, bootloaders can be strange */ + ret = twl_rtc_write_u8(0, REG_RTC_INTERRUPTS_REG); + if (ret < 0) + dev_warn(&pdev->dev, "unable to disable interrupt\n"); + /* init cached IRQ enable bits */ ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); if (ret < 0) -- cgit v1.2.3 From 0ba8f2d59304dfe69b59c034de723ad80f7ab9ac Mon Sep 17 00:00:00 2001 From: Li Haifeng Date: Mon, 17 Sep 2012 14:09:21 -0700 Subject: mm/page_alloc: fix the page address of higher page's buddy calculation The heuristic method for buddy has been introduced since commit 43506fad21ca ("mm/page_alloc.c: simplify calculation of combined index of adjacent buddy lists"). But the page address of higher page's buddy was wrongly calculated, which will lead page_is_buddy to fail for ever. IOW, the heuristic method would be disabled with the wrong page address of higher page's buddy. Calculating the page address of higher page's buddy should be based higher_page with the offset between index of higher page and index of higher page's buddy. Signed-off-by: Haifeng Li Signed-off-by: Gavin Shan Reviewed-by: Michal Hocko Cc: KyongHo Cho Cc: Mel Gorman Cc: Minchan Kim Cc: Johannes Weiner Cc: [2.6.38+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index c66fb875104a..c13ea7538891 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -584,7 +584,7 @@ static inline void __free_one_page(struct page *page, combined_idx = buddy_idx & page_idx; higher_page = page + (combined_idx - page_idx); buddy_idx = __find_buddy_index(combined_idx, order + 1); - higher_buddy = page + (buddy_idx - combined_idx); + higher_buddy = higher_page + (buddy_idx - combined_idx); if (page_is_buddy(higher_page, higher_buddy, order + 1)) { list_add_tail(&page->lru, &zone->free_area[order].free_list[migratetype]); -- cgit v1.2.3 From f14851af0ebb32745c6c5a2e400aa0549f9d20df Mon Sep 17 00:00:00 2001 From: qiuxishi Date: Mon, 17 Sep 2012 14:09:24 -0700 Subject: memory hotplug: fix section info double registration bug There may be a bug when registering section info. For example, on my Itanium platform, the pfn range of node0 includes the other nodes, so other nodes' section info will be double registered, and memmap's page count will equal to 3. node0: start_pfn=0x100, spanned_pfn=0x20fb00, present_pfn=0x7f8a3, => 0x000100-0x20fc00 node1: start_pfn=0x80000, spanned_pfn=0x80000, present_pfn=0x80000, => 0x080000-0x100000 node2: start_pfn=0x100000, spanned_pfn=0x80000, present_pfn=0x80000, => 0x100000-0x180000 node3: start_pfn=0x180000, spanned_pfn=0x80000, present_pfn=0x80000, => 0x180000-0x200000 free_all_bootmem_node() register_page_bootmem_info_node() register_page_bootmem_info_section() When hot remove memory, we can't free the memmap's page because page_count() is 2 after put_page_bootmem(). sparse_remove_one_section() free_section_usemap() free_map_bootmem() put_page_bootmem() [akpm@linux-foundation.org: add code comment] Signed-off-by: Xishi Qiu Signed-off-by: Jiang Liu Acked-by: Mel Gorman Cc: "Luck, Tony" Cc: Yasuaki Ishimatsu Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory_hotplug.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 3ad25f9d1fc1..6a5b90d0cfd7 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -126,9 +126,6 @@ static void register_page_bootmem_info_section(unsigned long start_pfn) struct mem_section *ms; struct page *page, *memmap; - if (!pfn_valid(start_pfn)) - return; - section_nr = pfn_to_section_nr(start_pfn); ms = __nr_to_section(section_nr); @@ -187,9 +184,16 @@ void register_page_bootmem_info_node(struct pglist_data *pgdat) end_pfn = pfn + pgdat->node_spanned_pages; /* register_section info */ - for (; pfn < end_pfn; pfn += PAGES_PER_SECTION) - register_page_bootmem_info_section(pfn); - + for (; pfn < end_pfn; pfn += PAGES_PER_SECTION) { + /* + * Some platforms can assign the same pfn to multiple nodes - on + * node0 as well as nodeN. To avoid registering a pfn against + * multiple nodes we check that this pfn does not already + * reside in some other node. + */ + if (pfn_valid(pfn) && (pfn_to_nid(pfn) == node)) + register_page_bootmem_info_section(pfn); + } } #endif /* !CONFIG_SPARSEMEM_VMEMMAP */ -- cgit v1.2.3 From 960bd11bf2daf669d0d910428fd9ef5a15c3d7cb Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Mon, 17 Sep 2012 15:42:31 -0700 Subject: workqueue: always clear WORKER_REBIND in busy_worker_rebind_fn() busy_worker_rebind_fn() didn't clear WORKER_REBIND if rebinding failed (CPU is down again). This used to be okay because the flag wasn't used for anything else. However, after 25511a477 "workqueue: reimplement CPU online rebinding to handle idle workers", WORKER_REBIND is also used to command idle workers to rebind. If not cleared, the worker may confuse the next CPU_UP cycle by having REBIND spuriously set or oops / get stuck by prematurely calling idle_worker_rebind(). WARNING: at /work/os/wq/kernel/workqueue.c:1323 worker_thread+0x4cd/0x5 00() Hardware name: Bochs Modules linked in: test_wq(O-) Pid: 33, comm: kworker/1:1 Tainted: G O 3.6.0-rc1-work+ #3 Call Trace: [] warn_slowpath_common+0x7f/0xc0 [] warn_slowpath_null+0x1a/0x20 [] worker_thread+0x4cd/0x500 [] kthread+0xbe/0xd0 [] kernel_thread_helper+0x4/0x10 ---[ end trace e977cf20f4661968 ]--- BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] worker_thread+0x360/0x500 PGD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: test_wq(O-) CPU 0 Pid: 33, comm: kworker/1:1 Tainted: G W O 3.6.0-rc1-work+ #3 Bochs Bochs RIP: 0010:[] [] worker_thread+0x360/0x500 RSP: 0018:ffff88001e1c9de0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88001e633e00 RCX: 0000000000004140 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000009 RBP: ffff88001e1c9ea0 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000002 R11: 0000000000000000 R12: ffff88001fc8d580 R13: ffff88001fc8d590 R14: ffff88001e633e20 R15: ffff88001e1c6900 FS: 0000000000000000(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000130e8000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/1:1 (pid: 33, threadinfo ffff88001e1c8000, task ffff88001e1c6900) Stack: ffff880000000000 ffff88001e1c9e40 0000000000000001 ffff88001e1c8010 ffff88001e519c78 ffff88001e1c9e58 ffff88001e1c6900 ffff88001e1c6900 ffff88001e1c6900 ffff88001e1c6900 ffff88001fc8d340 ffff88001fc8d340 Call Trace: [] kthread+0xbe/0xd0 [] kernel_thread_helper+0x4/0x10 Code: b1 00 f6 43 48 02 0f 85 91 01 00 00 48 8b 43 38 48 89 df 48 8b 00 48 89 45 90 e8 ac f0 ff ff 3c 01 0f 85 60 01 00 00 48 8b 53 50 <8b> 02 83 e8 01 85 c0 89 02 0f 84 3b 01 00 00 48 8b 43 38 48 8b RIP [] worker_thread+0x360/0x500 RSP CR2: 0000000000000000 There was no reason to keep WORKER_REBIND on failure in the first place - WORKER_UNBOUND is guaranteed to be set in such cases preventing incorrectly activating concurrency management. Always clear WORKER_REBIND. tj: Updated comment and description. Signed-off-by: Lai Jiangshan Signed-off-by: Tejun Heo --- kernel/workqueue.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 1e1373bcb3e3..b80065a2450a 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -1349,8 +1349,16 @@ static void busy_worker_rebind_fn(struct work_struct *work) struct worker *worker = container_of(work, struct worker, rebind_work); struct global_cwq *gcwq = worker->pool->gcwq; - if (worker_maybe_bind_and_lock(worker)) - worker_clr_flags(worker, WORKER_REBIND); + worker_maybe_bind_and_lock(worker); + + /* + * %WORKER_REBIND must be cleared even if the above binding failed; + * otherwise, we may confuse the next CPU_UP cycle or oops / get + * stuck by calling idle_worker_rebind() prematurely. If CPU went + * down again inbetween, %WORKER_UNBOUND would be set, so clearing + * %WORKER_REBIND is always safe. + */ + worker_clr_flags(worker, WORKER_REBIND); spin_unlock_irq(&gcwq->lock); } -- cgit v1.2.3 From d6838a62b4d36d3e2791cffe155586973b20a381 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Tue, 18 Sep 2012 10:05:34 +0900 Subject: ARM: SAMSUNG: Use spin_lock_{irqsave,irqrestore} in clk_set_rate The spinlock clocks_lock can be held during ISR, hence it is not safe to hold that lock with disabling interrupts. It fixes following potential deadlock. ========================================================= [ INFO: possible irq lock inversion dependency detected ] 3.6.0-rc4+ #2 Not tainted --------------------------------------------------------- swapper/0/1 just changed the state of lock: (&(&host->lock)->rlock){-.....}, at: [] sdhci_irq+0x15/0x564 but this lock took another, HARDIRQ-unsafe lock in the past: (clocks_lock){+.+...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(clocks_lock); local_irq_disable(); lock(&(&host->lock)->rlock); lock(clocks_lock); lock(&(&host->lock)->rlock); *** DEADLOCK *** Signed-off-by: Tushar Behera Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/clock.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 80eacca4682a..d1116e2dfbea 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -144,6 +144,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) int clk_set_rate(struct clk *clk, unsigned long rate) { + unsigned long flags; int ret; if (IS_ERR(clk)) @@ -159,9 +160,9 @@ int clk_set_rate(struct clk *clk, unsigned long rate) if (clk->ops == NULL || clk->ops->set_rate == NULL) return -EINVAL; - spin_lock(&clocks_lock); + spin_lock_irqsave(&clocks_lock, flags); ret = (clk->ops->set_rate)(clk, rate); - spin_unlock(&clocks_lock); + spin_unlock_irqrestore(&clocks_lock, flags); return ret; } -- cgit v1.2.3 From a704835d6a7a8254067a1be60d614cd5c0c73e44 Mon Sep 17 00:00:00 2001 From: Tetsuyuki Kobayashi Date: Thu, 6 Sep 2012 07:19:36 +0000 Subject: ARM: shmobile: kzm9g: bugfix: correct mmcif interrupt settings Correct interrupt settings of sh_mmc:int and sh_mmc:error in board-kzm9g.c. Signed-off-by: Tetsuyuki Kobayashi Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-kzm9g.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 53b7ea92c32c..3b8a0171c3cb 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -346,11 +346,11 @@ static struct resource sh_mmcif_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(141), + .start = gic_spi(140), .flags = IORESOURCE_IRQ, }, [2] = { - .start = gic_spi(140), + .start = gic_spi(141), .flags = IORESOURCE_IRQ, }, }; -- cgit v1.2.3 From 2e2c682becb20416c140aa0d6d3137b51a5c76da Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 17 Sep 2012 15:20:22 +0530 Subject: DMA: PL330: Fix potential NULL pointer dereference in pl330_submit_req() 'r->cfg' is being checked for NULL. However, it is dereferenced in the previous statements. Thus moving those statements within the check. Signed-off-by: Sachin Kamat Acked-by: Jassi Brar Cc: Stable Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index e4feba6b03c0..a3b26ada8122 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -1567,17 +1567,19 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r) goto xfer_exit; } - /* Prefer Secure Channel */ - if (!_manager_ns(thrd)) - r->cfg->nonsecure = 0; - else - r->cfg->nonsecure = 1; /* Use last settings, if not provided */ - if (r->cfg) + if (r->cfg) { + /* Prefer Secure Channel */ + if (!_manager_ns(thrd)) + r->cfg->nonsecure = 0; + else + r->cfg->nonsecure = 1; + ccr = _prepare_ccr(r->cfg); - else + } else { ccr = readl(regs + CC(thrd->id)); + } /* If this req doesn't have valid xfer settings */ if (!_is_valid(ccr)) { -- cgit v1.2.3 From 61c6e7531d3b66b33187b8cdd700fd8ab93ffd62 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 17 Sep 2012 15:20:23 +0530 Subject: DMA: PL330: Check the pointer returned by kzalloc kzalloc could return NULL. Hence add a check to avoid NULL pointer dereference. Signed-off-by: Sachin Kamat Acked-by: Jassi Brar Cc: Stable Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index a3b26ada8122..f5843bc80baa 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2930,6 +2930,11 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) num_chan = max_t(int, pi->pcfg.num_peri, pi->pcfg.num_chan); pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL); + if (!pdmac->peripherals) { + ret = -ENOMEM; + dev_err(&adev->dev, "unable to allocate pdmac->peripherals\n"); + goto probe_err5; + } for (i = 0; i < num_chan; i++) { pch = &pdmac->peripherals[i]; -- cgit v1.2.3 From 077664a2644ff6fa0fb1a0c15be96fed359d09f4 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 14 Sep 2012 20:25:48 +0200 Subject: sh: pfc: Release spinlock in sh_pfc_gpio_request_enable() error path The sh_pfc_gpio_request_enable() function acquires a spinlock but fails to release it before returning if the requested mux type is not supported. Fix this. Signed-off-by: Laurent Pinchart Signed-off-by: Paul Mundt --- drivers/sh/pfc/pinctrl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/sh/pfc/pinctrl.c b/drivers/sh/pfc/pinctrl.c index 2804eaae804e..a3ac39b79192 100644 --- a/drivers/sh/pfc/pinctrl.c +++ b/drivers/sh/pfc/pinctrl.c @@ -211,7 +211,8 @@ static int sh_pfc_gpio_request_enable(struct pinctrl_dev *pctldev, break; default: pr_err("Unsupported mux type (%d), bailing...\n", pinmux_type); - return -ENOTSUPP; + ret = -ENOTSUPP; + goto err; } ret = 0; -- cgit v1.2.3 From 5e071e2b4b82599f07cce5e1d2d272feb462950c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 18 Sep 2012 17:04:37 +0900 Subject: sh: Fix up TIF_NOTIFY_RESUME sans TIF_SIGPENDING handling. As Al notes, we missed a TIF_NOTIFY_RESUME check which caused any handlers without TIF_SIGPENDING also set to skip the notification: Looks like while it is in the relevant masks *and* checked in do_notify_resume() both on 32bit and 64bit variants since commit ab99c733ae73cce31f2a2434f7099564e5a73d95 ("sh: Make syscall tracer use tracehook notifiers, add TIF_NOTIFY_RESUME.") they are actually *not* reached without simulataneous SIGPENDING, since the actual glue in the callers had not been updated back then and still checks for _TIF_SIGPENDING alone when deciding whether to hit do_notify_resume() or not. Reported-by: Nobuhiro Iwamatsu Signed-off-by: Al Viro Tested-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh5/entry.S | 2 +- arch/sh/kernel/entry-common.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index b7cf6a547f11..7e605b95592a 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -933,7 +933,7 @@ ret_with_reschedule: pta restore_all, tr1 - movi _TIF_SIGPENDING, r8 + movi (_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), r8 and r8, r7, r8 pta work_notifysig, tr0 bne r8, ZERO, tr0 diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index f67601cb3f1f..b96489d8b27d 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -139,7 +139,7 @@ work_pending: ! r8: current_thread_info ! t: result of "tst #_TIF_NEED_RESCHED, r0" bf/s work_resched - tst #_TIF_SIGPENDING, r0 + tst #(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME), r0 work_notifysig: bt/s __restore_all mov r15, r4 -- cgit v1.2.3 From 2bd6efad25d7c1950008e2ab4e2d6796001919fc Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 17 Sep 2012 11:47:13 +0100 Subject: blk: add an upper sanity check on partition adding 65536 should be ludicrous anyway but without it we overflow the memory computation doing the allocation and badness occurs. Signed-off-by: Alan Cox Signed-off-by: Jens Axboe --- block/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/ioctl.c b/block/ioctl.c index 4476e0e85d16..4a85096f5410 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -41,7 +41,7 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user sizeof(long long) > sizeof(long)) { long pstart = start, plength = length; if (pstart != start || plength != length - || pstart < 0 || plength < 0) + || pstart < 0 || plength < 0 || partno > 65535) return -EINVAL; } -- cgit v1.2.3 From 2453f5f992717251cfadab6184fbb3ec2f2e8b40 Mon Sep 17 00:00:00 2001 From: Stephen M. Cameron Date: Fri, 14 Sep 2012 16:35:10 -0500 Subject: cciss: fix handling of protocol error If a command completes with a status of CMD_PROTOCOL_ERR, this information should be conveyed to the SCSI mid layer, not dropped on the floor. Unlike a similar bug in the hpsa driver, this bug only affects tape drives and CD and DVD ROM drives in the cciss driver, and to induce it, you have to disconnect (or damage) a cable, so it is not a very likely scenario (which would explain why the bug has gone undetected for the last 10 years.) Signed-off-by: Stephen M. Cameron Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe --- drivers/block/cciss_scsi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 38aa6dda6b81..da3311129a0c 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -795,6 +795,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout, } break; case CMD_PROTOCOL_ERR: + cmd->result = DID_ERROR << 16; dev_warn(&h->pdev->dev, "%p has protocol error\n", c); break; -- cgit v1.2.3 From 256d0eaac87da1e993190846064f339f4c7a63f5 Mon Sep 17 00:00:00 2001 From: Stephen M. Cameron Date: Fri, 14 Sep 2012 16:34:25 -0500 Subject: [SCSI] hpsa: fix handling of protocol error If a command status of CMD_PROTOCOL_ERR is received, this information should be conveyed to the SCSI mid layer, not dropped on the floor. CMD_PROTOCOL_ERR may be received from the Smart Array for any commands destined for an external RAID controller such as a P2000, or commands destined for tape drives or CD/DVD-ROM drives, if for instance a cable is disconnected. This mostly affects multipath configurations, as disconnecting a cable on a non-multipath configuration is not going to do anything good regardless of whether CMD_PROTOCOL_ERR is handled correctly or not. Not handling CMD_PROTOCOL_ERR correctly in a multipath configaration involving external RAID controllers may cause data corruption, so this is quite a serious bug. This bug should not normally cause a problem for direct attached disk storage. Signed-off-by: Stephen M. Cameron Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 796482badf13..2b4261cb7742 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1315,8 +1315,9 @@ static void complete_scsi_command(struct CommandList *cp) } break; case CMD_PROTOCOL_ERR: + cmd->result = DID_ERROR << 16; dev_warn(&h->pdev->dev, "cp %p has " - "protocol error \n", cp); + "protocol error\n", cp); break; case CMD_HARDWARE_ERR: cmd->result = DID_ERROR << 16; -- cgit v1.2.3 From 35495173e1df621dff0e9a244accbe32cd28a98f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 16 Sep 2012 22:28:35 -0300 Subject: ARM: imx: armadillo5x0: Fix illegal register access Since commit eb92044eb (ARM i.MX3: Make ccm base address a variable ) it is necessary to pass the CCM register base as a variable. Fix the CCM register access in mach-armadillo5x0 by passing mx3_ccm_base and avoid illegal accesses. Also applies to v3.5 Reported-by: Arnd Bergmann Signed-off-by: Fabio Estevam Acked-by: Arnd Bergmann Signed-off-by: Sascha Hauer Cc: stable@vger.kernel.org --- arch/arm/mach-imx/mach-armadillo5x0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 2c6ab3273f9e..5985ed1b8c98 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -526,7 +526,8 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ - __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); + __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) | + (1 << 30), mx3_ccm_base + MXC_CCM_RCSR); /* RTC */ /* Get RTC IRQ and register the chip */ -- cgit v1.2.3 From 42a3f891caee0d9baa60a6964e41a28b9c657407 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 18 Sep 2012 10:05:31 +0200 Subject: ARM i.MX25: Make timer irq work again Since i.MX has SPARSE_IRQ enabled the i.MX25 timer is broken. This is because the internal irqs now start at an offset of NR_IRQS_LEGACY. The patch fixed this up, but missed the i.MX25 timer which used a hardcoded value instead of a define. This patch introduces a define for the timer irq and uses it. This is broken since introduced with 3.6-rc1: | commit 8842a9e2869cae14bbb8184004a42fc3070587fb | Author: Shawn Guo | Date: Thu Jun 14 11:16:14 2012 +0800 | | ARM: imx: enable SPARSE_IRQ for imx platform Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-imx/clk-imx25.c | 2 +- arch/arm/plat-mxc/include/mach/mx25.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 4431a62fff5b..d20d4795f4ea 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -241,6 +241,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); clk_register_clkdev(clk[iim_ipg], "iim", NULL); - mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); + mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1); return 0; } diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 627d94f1b010..ec466400a200 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -98,6 +98,7 @@ #define MX25_INT_UART1 (NR_IRQS_LEGACY + 45) #define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51) #define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX25_INT_GPT1 (NR_IRQS_LEGACY + 54) #define MX25_INT_FEC (NR_IRQS_LEGACY + 57) #define MX25_DMA_REQ_SSI2_RX1 22 -- cgit v1.2.3 From b161dfa6937ae46d50adce8a7c6b12233e96e7bd Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 17 Sep 2012 22:31:38 +0200 Subject: vfs: dcache: use DCACHE_DENTRY_KILLED instead of DCACHE_DISCONNECTED in d_kill() IBM reported a soft lockup after applying the fix for the rename_lock deadlock. Commit c83ce989cb5f ("VFS: Fix the nfs sillyrename regression in kernel 2.6.38") was found to be the culprit. The nfs sillyrename fix used DCACHE_DISCONNECTED to indicate that the dentry was killed. This flag can be set on non-killed dentries too, which results in infinite retries when trying to traverse the dentry tree. This patch introduces a separate flag: DCACHE_DENTRY_KILLED, which is only set in d_kill() and makes try_to_ascend() test only this flag. IBM reported successful test results with this patch. Signed-off-by: Miklos Szeredi Cc: Trond Myklebust Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- fs/dcache.c | 4 ++-- include/linux/dcache.h | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 8086636bf796..16521a9f2038 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -389,7 +389,7 @@ static struct dentry *d_kill(struct dentry *dentry, struct dentry *parent) * Inform try_to_ascend() that we are no longer attached to the * dentry tree */ - dentry->d_flags |= DCACHE_DISCONNECTED; + dentry->d_flags |= DCACHE_DENTRY_KILLED; if (parent) spin_unlock(&parent->d_lock); dentry_iput(dentry); @@ -1048,7 +1048,7 @@ static struct dentry *try_to_ascend(struct dentry *old, int locked, unsigned seq * or deletion */ if (new != old->d_parent || - (old->d_flags & DCACHE_DISCONNECTED) || + (old->d_flags & DCACHE_DENTRY_KILLED) || (!locked && read_seqretry(&rename_lock, seq))) { spin_unlock(&new->d_lock); new = NULL; diff --git a/include/linux/dcache.h b/include/linux/dcache.h index caa34e50537e..59200795482e 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -206,6 +206,8 @@ struct dentry_operations { #define DCACHE_MANAGED_DENTRY \ (DCACHE_MOUNTED|DCACHE_NEED_AUTOMOUNT|DCACHE_MANAGE_TRANSIT) +#define DCACHE_DENTRY_KILLED 0x100000 + extern seqlock_t rename_lock; static inline int dname_external(struct dentry *dentry) -- cgit v1.2.3 From bafa6d9d89072c1a18853afe9ee5de05c491c13a Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Fri, 7 Sep 2012 00:45:29 +0000 Subject: ipv4/route: arg delay is useless in rt_cache_flush() Since route cache deletion (89aef8921bfbac22f), delay is no more used. Remove it. Signed-off-by: Nicolas Dichtel Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/route.h | 2 +- net/ipv4/arp.c | 2 +- net/ipv4/devinet.c | 6 +++--- net/ipv4/fib_frontend.c | 20 ++++++++++---------- net/ipv4/fib_rules.c | 2 +- net/ipv4/fib_trie.c | 6 +++--- net/ipv4/route.c | 19 +++---------------- 7 files changed, 22 insertions(+), 35 deletions(-) diff --git a/include/net/route.h b/include/net/route.h index 776a27f1ab78..da22243d2760 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -108,7 +108,7 @@ extern struct ip_rt_acct __percpu *ip_rt_acct; struct in_device; extern int ip_rt_init(void); -extern void rt_cache_flush(struct net *net, int how); +extern void rt_cache_flush(struct net *net); extern void rt_flush_dev(struct net_device *dev); extern struct rtable *__ip_route_output_key(struct net *, struct flowi4 *flp); extern struct rtable *ip_route_output_flow(struct net *, struct flowi4 *flp, diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c index 77e87aff419a..47800459e4cb 100644 --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -1225,7 +1225,7 @@ static int arp_netdev_event(struct notifier_block *this, unsigned long event, switch (event) { case NETDEV_CHANGEADDR: neigh_changeaddr(&arp_tbl, dev); - rt_cache_flush(dev_net(dev), 0); + rt_cache_flush(dev_net(dev)); break; default: break; diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 44bf82e3aef7..9b55b6f5a585 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1503,7 +1503,7 @@ static int devinet_conf_proc(ctl_table *ctl, int write, if (i == IPV4_DEVCONF_ACCEPT_LOCAL - 1 || i == IPV4_DEVCONF_ROUTE_LOCALNET - 1) if ((new_value == 0) && (old_value != 0)) - rt_cache_flush(net, 0); + rt_cache_flush(net); } return ret; @@ -1537,7 +1537,7 @@ static int devinet_sysctl_forward(ctl_table *ctl, int write, dev_disable_lro(idev->dev); } rtnl_unlock(); - rt_cache_flush(net, 0); + rt_cache_flush(net); } } @@ -1554,7 +1554,7 @@ static int ipv4_doint_and_flush(ctl_table *ctl, int write, struct net *net = ctl->extra2; if (write && *valp != val) - rt_cache_flush(net, 0); + rt_cache_flush(net); return ret; } diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index c43ae3fba792..8e2b475da9fa 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -148,7 +148,7 @@ static void fib_flush(struct net *net) } if (flushed) - rt_cache_flush(net, -1); + rt_cache_flush(net); } /* @@ -999,11 +999,11 @@ static void nl_fib_lookup_exit(struct net *net) net->ipv4.fibnl = NULL; } -static void fib_disable_ip(struct net_device *dev, int force, int delay) +static void fib_disable_ip(struct net_device *dev, int force) { if (fib_sync_down_dev(dev, force)) fib_flush(dev_net(dev)); - rt_cache_flush(dev_net(dev), delay); + rt_cache_flush(dev_net(dev)); arp_ifdown(dev); } @@ -1020,7 +1020,7 @@ static int fib_inetaddr_event(struct notifier_block *this, unsigned long event, fib_sync_up(dev); #endif atomic_inc(&net->ipv4.dev_addr_genid); - rt_cache_flush(dev_net(dev), -1); + rt_cache_flush(dev_net(dev)); break; case NETDEV_DOWN: fib_del_ifaddr(ifa, NULL); @@ -1029,9 +1029,9 @@ static int fib_inetaddr_event(struct notifier_block *this, unsigned long event, /* Last address was deleted from this interface. * Disable IP. */ - fib_disable_ip(dev, 1, 0); + fib_disable_ip(dev, 1); } else { - rt_cache_flush(dev_net(dev), -1); + rt_cache_flush(dev_net(dev)); } break; } @@ -1045,7 +1045,7 @@ static int fib_netdev_event(struct notifier_block *this, unsigned long event, vo struct net *net = dev_net(dev); if (event == NETDEV_UNREGISTER) { - fib_disable_ip(dev, 2, -1); + fib_disable_ip(dev, 2); rt_flush_dev(dev); return NOTIFY_DONE; } @@ -1062,14 +1062,14 @@ static int fib_netdev_event(struct notifier_block *this, unsigned long event, vo fib_sync_up(dev); #endif atomic_inc(&net->ipv4.dev_addr_genid); - rt_cache_flush(dev_net(dev), -1); + rt_cache_flush(dev_net(dev)); break; case NETDEV_DOWN: - fib_disable_ip(dev, 0, 0); + fib_disable_ip(dev, 0); break; case NETDEV_CHANGEMTU: case NETDEV_CHANGE: - rt_cache_flush(dev_net(dev), 0); + rt_cache_flush(dev_net(dev)); break; case NETDEV_UNREGISTER_BATCH: break; diff --git a/net/ipv4/fib_rules.c b/net/ipv4/fib_rules.c index a83d74e498d2..274309d3aded 100644 --- a/net/ipv4/fib_rules.c +++ b/net/ipv4/fib_rules.c @@ -259,7 +259,7 @@ static size_t fib4_rule_nlmsg_payload(struct fib_rule *rule) static void fib4_rule_flush_cache(struct fib_rules_ops *ops) { - rt_cache_flush(ops->fro_net, -1); + rt_cache_flush(ops->fro_net); } static const struct fib_rules_ops __net_initdata fib4_rules_ops_template = { diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 57bd978483e1..d1b93595b4a7 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1286,7 +1286,7 @@ int fib_table_insert(struct fib_table *tb, struct fib_config *cfg) fib_release_info(fi_drop); if (state & FA_S_ACCESSED) - rt_cache_flush(cfg->fc_nlinfo.nl_net, -1); + rt_cache_flush(cfg->fc_nlinfo.nl_net); rtmsg_fib(RTM_NEWROUTE, htonl(key), new_fa, plen, tb->tb_id, &cfg->fc_nlinfo, NLM_F_REPLACE); @@ -1333,7 +1333,7 @@ int fib_table_insert(struct fib_table *tb, struct fib_config *cfg) list_add_tail_rcu(&new_fa->fa_list, (fa ? &fa->fa_list : fa_head)); - rt_cache_flush(cfg->fc_nlinfo.nl_net, -1); + rt_cache_flush(cfg->fc_nlinfo.nl_net); rtmsg_fib(RTM_NEWROUTE, htonl(key), new_fa, plen, tb->tb_id, &cfg->fc_nlinfo, 0); succeeded: @@ -1708,7 +1708,7 @@ int fib_table_delete(struct fib_table *tb, struct fib_config *cfg) trie_leaf_remove(t, l); if (fa->fa_state & FA_S_ACCESSED) - rt_cache_flush(cfg->fc_nlinfo.nl_net, -1); + rt_cache_flush(cfg->fc_nlinfo.nl_net); fib_release_info(fa->fa_info); alias_free_mem_rcu(fa); diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 82cf2a722b23..f6436d3b207a 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -461,11 +461,7 @@ static void rt_cache_invalidate(struct net *net) atomic_add(shuffle + 1U, &net->ipv4.rt_genid); } -/* - * delay < 0 : invalidate cache (fast : entries will be deleted later) - * delay >= 0 : invalidate & flush cache (can be long) - */ -void rt_cache_flush(struct net *net, int delay) +void rt_cache_flush(struct net *net) { rt_cache_invalidate(net); } @@ -2345,7 +2341,7 @@ int ip_rt_dump(struct sk_buff *skb, struct netlink_callback *cb) void ip_rt_multicast_event(struct in_device *in_dev) { - rt_cache_flush(dev_net(in_dev->dev), 0); + rt_cache_flush(dev_net(in_dev->dev)); } #ifdef CONFIG_SYSCTL @@ -2354,16 +2350,7 @@ static int ipv4_sysctl_rtcache_flush(ctl_table *__ctl, int write, size_t *lenp, loff_t *ppos) { if (write) { - int flush_delay; - ctl_table ctl; - struct net *net; - - memcpy(&ctl, __ctl, sizeof(ctl)); - ctl.data = &flush_delay; - proc_dointvec(&ctl, write, buffer, lenp, ppos); - - net = (struct net *)__ctl->extra1; - rt_cache_flush(net, flush_delay); + rt_cache_flush((struct net *)__ctl->extra1); return 0; } -- cgit v1.2.3 From 2885da72966fcb89f48d554339d347fb02b5ea78 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 7 Sep 2012 22:27:11 +0200 Subject: net: rt_cache_flush() cleanup We dont use jhash anymore since route cache removal, so we can get rid of get_random_bytes() calls for rt_genid changes. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/route.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index f6436d3b207a..be27cfa96e88 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -447,23 +447,9 @@ static inline bool rt_is_expired(const struct rtable *rth) return rth->rt_genid != rt_genid(dev_net(rth->dst.dev)); } -/* - * Perturbation of rt_genid by a small quantity [1..256] - * Using 8 bits of shuffling ensure we can call rt_cache_invalidate() - * many times (2^24) without giving recent rt_genid. - * Jenkins hash is strong enough that litle changes of rt_genid are OK. - */ -static void rt_cache_invalidate(struct net *net) -{ - unsigned char shuffle; - - get_random_bytes(&shuffle, sizeof(shuffle)); - atomic_add(shuffle + 1U, &net->ipv4.rt_genid); -} - void rt_cache_flush(struct net *net) { - rt_cache_invalidate(net); + atomic_inc(&net->ipv4.rt_genid); } static struct neighbour *ipv4_neigh_lookup(const struct dst_entry *dst, @@ -2520,8 +2506,7 @@ static __net_initdata struct pernet_operations sysctl_route_ops = { static __net_init int rt_genid_init(struct net *net) { - get_random_bytes(&net->ipv4.rt_genid, - sizeof(net->ipv4.rt_genid)); + atomic_set(&net->ipv4.rt_genid, 0); get_random_bytes(&net->ipv4.dev_addr_genid, sizeof(net->ipv4.dev_addr_genid)); return 0; -- cgit v1.2.3 From b42664f898c976247f7f609b8bb9c94d7475ca10 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 10 Sep 2012 22:09:44 +0000 Subject: netns: move net->ipv4.rt_genid to net->rt_genid This commit prepares the use of rt_genid by both IPv4 and IPv6. Initialization is left in IPv4 part. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- include/net/net_namespace.h | 10 ++++++++++ include/net/netns/ipv4.h | 1 - net/ipv4/route.c | 9 ++------- 3 files changed, 12 insertions(+), 8 deletions(-) diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index ae1cd6c9ba52..fd87963a0ea5 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -102,6 +102,7 @@ struct net { #endif struct netns_ipvs *ipvs; struct sock *diag_nlsk; + atomic_t rt_genid; }; @@ -300,5 +301,14 @@ static inline void unregister_net_sysctl_table(struct ctl_table_header *header) } #endif +static inline int rt_genid(struct net *net) +{ + return atomic_read(&net->rt_genid); +} + +static inline void rt_genid_bump(struct net *net) +{ + atomic_inc(&net->rt_genid); +} #endif /* __NET_NET_NAMESPACE_H */ diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h index 1474dd65c66f..eb24dbccd81e 100644 --- a/include/net/netns/ipv4.h +++ b/include/net/netns/ipv4.h @@ -65,7 +65,6 @@ struct netns_ipv4 { unsigned int sysctl_ping_group_range[2]; long sysctl_tcp_mem[3]; - atomic_t rt_genid; atomic_t dev_addr_genid; #ifdef CONFIG_IP_MROUTE diff --git a/net/ipv4/route.c b/net/ipv4/route.c index be27cfa96e88..fd9af60397b5 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -202,11 +202,6 @@ EXPORT_SYMBOL(ip_tos2prio); static DEFINE_PER_CPU(struct rt_cache_stat, rt_cache_stat); #define RT_CACHE_STAT_INC(field) __this_cpu_inc(rt_cache_stat.field) -static inline int rt_genid(struct net *net) -{ - return atomic_read(&net->ipv4.rt_genid); -} - #ifdef CONFIG_PROC_FS static void *rt_cache_seq_start(struct seq_file *seq, loff_t *pos) { @@ -449,7 +444,7 @@ static inline bool rt_is_expired(const struct rtable *rth) void rt_cache_flush(struct net *net) { - atomic_inc(&net->ipv4.rt_genid); + rt_genid_bump(net); } static struct neighbour *ipv4_neigh_lookup(const struct dst_entry *dst, @@ -2506,7 +2501,7 @@ static __net_initdata struct pernet_operations sysctl_route_ops = { static __net_init int rt_genid_init(struct net *net) { - atomic_set(&net->ipv4.rt_genid, 0); + atomic_set(&net->rt_genid, 0); get_random_bytes(&net->ipv4.dev_addr_genid, sizeof(net->ipv4.dev_addr_genid)); return 0; -- cgit v1.2.3 From ee8372dd1989287c5eedb69d44bac43f69e496f1 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 10 Sep 2012 22:09:45 +0000 Subject: xfrm: invalidate dst on policy insertion/deletion When a policy is inserted or deleted, all dst should be recalculated. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/xfrm/xfrm_policy.c | 1 + security/selinux/include/xfrm.h | 1 + 2 files changed, 2 insertions(+) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 5a2aa17e4d3c..ab2ce7d5152d 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -585,6 +585,7 @@ int xfrm_policy_insert(int dir, struct xfrm_policy *policy, int excl) xfrm_pol_hold(policy); net->xfrm.policy_count[dir]++; atomic_inc(&flow_cache_genid); + rt_genid_bump(net); if (delpol) __xfrm_policy_unlink(delpol, dir); policy->index = delpol ? delpol->index : xfrm_gen_index(net, dir); diff --git a/security/selinux/include/xfrm.h b/security/selinux/include/xfrm.h index c220f314709c..65f67cb0aefb 100644 --- a/security/selinux/include/xfrm.h +++ b/security/selinux/include/xfrm.h @@ -51,6 +51,7 @@ int selinux_xfrm_decode_session(struct sk_buff *skb, u32 *sid, int ckall); static inline void selinux_xfrm_notify_policyload(void) { atomic_inc(&flow_cache_genid); + rt_genid_bump(&init_net); } #else static inline int selinux_xfrm_enabled(void) -- cgit v1.2.3 From 6f3118b571b8a4c06c7985dc3172c3526cb86253 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 10 Sep 2012 22:09:46 +0000 Subject: ipv6: use net->rt_genid to check dst validity IPv6 dst should take care of rt_genid too. When a xfrm policy is inserted or deleted, all dst should be invalidated. To force the validation, dst entries should be created with ->obsolete set to DST_OBSOLETE_FORCE_CHK. This was already the case for all functions calling ip6_dst_alloc(), except for ip6_rt_copy(). As a consequence, we can remove the specific code in inet6_connection_sock. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- include/net/ip6_fib.h | 5 ++--- net/ipv6/inet6_connection_sock.c | 23 +---------------------- net/ipv6/route.c | 13 +++++++++---- 3 files changed, 12 insertions(+), 29 deletions(-) diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index 0fedbd8d747a..9fc7114159e8 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -111,9 +111,8 @@ struct rt6_info { struct inet6_dev *rt6i_idev; unsigned long _rt6i_peer; -#ifdef CONFIG_XFRM - u32 rt6i_flow_cache_genid; -#endif + u32 rt6i_genid; + /* more non-fragment space at head required */ unsigned short rt6i_nfheader_len; diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c index 0251a6005be8..c4f934176cab 100644 --- a/net/ipv6/inet6_connection_sock.c +++ b/net/ipv6/inet6_connection_sock.c @@ -175,33 +175,12 @@ void __inet6_csk_dst_store(struct sock *sk, struct dst_entry *dst, const struct in6_addr *saddr) { __ip6_dst_store(sk, dst, daddr, saddr); - -#ifdef CONFIG_XFRM - { - struct rt6_info *rt = (struct rt6_info *)dst; - rt->rt6i_flow_cache_genid = atomic_read(&flow_cache_genid); - } -#endif } static inline struct dst_entry *__inet6_csk_dst_check(struct sock *sk, u32 cookie) { - struct dst_entry *dst; - - dst = __sk_dst_check(sk, cookie); - -#ifdef CONFIG_XFRM - if (dst) { - struct rt6_info *rt = (struct rt6_info *)dst; - if (rt->rt6i_flow_cache_genid != atomic_read(&flow_cache_genid)) { - __sk_dst_reset(sk); - dst = NULL; - } - } -#endif - - return dst; + return __sk_dst_check(sk, cookie); } static struct dst_entry *inet6_csk_route_socket(struct sock *sk, diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 8e80fd279100..fb29e2215a19 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -281,13 +281,14 @@ static inline struct rt6_info *ip6_dst_alloc(struct net *net, struct fib6_table *table) { struct rt6_info *rt = dst_alloc(&net->ipv6.ip6_dst_ops, dev, - 0, DST_OBSOLETE_NONE, flags); + 0, DST_OBSOLETE_FORCE_CHK, flags); if (rt) { struct dst_entry *dst = &rt->dst; memset(dst + 1, 0, sizeof(*rt) - sizeof(*dst)); rt6_init_peer(rt, table ? &table->tb6_peers : net->ipv6.peers); + rt->rt6i_genid = rt_genid(net); } return rt; } @@ -1031,6 +1032,13 @@ static struct dst_entry *ip6_dst_check(struct dst_entry *dst, u32 cookie) rt = (struct rt6_info *) dst; + /* All IPV6 dsts are created with ->obsolete set to the value + * DST_OBSOLETE_FORCE_CHK which forces validation calls down + * into this function always. + */ + if (rt->rt6i_genid != rt_genid(dev_net(rt->dst.dev))) + return NULL; + if (rt->rt6i_node && (rt->rt6i_node->fn_sernum == cookie)) { if (rt->rt6i_peer_genid != rt6_peer_genid()) { if (!rt6_has_peer(rt)) @@ -1397,8 +1405,6 @@ int ip6_route_add(struct fib6_config *cfg) goto out; } - rt->dst.obsolete = -1; - if (cfg->fc_flags & RTF_EXPIRES) rt6_set_expires(rt, jiffies + clock_t_to_jiffies(cfg->fc_expires)); @@ -2080,7 +2086,6 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev, rt->dst.input = ip6_input; rt->dst.output = ip6_output; rt->rt6i_idev = idev; - rt->dst.obsolete = -1; rt->rt6i_flags = RTF_UP | RTF_NONEXTHOP; if (anycast) -- cgit v1.2.3 From 2c20cbd7e3aa6e9dddc07975d3f3a89fe1f69c00 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 10 Sep 2012 22:09:47 +0000 Subject: ipv6: use DST_* macro to set obselete field Signed-off-by: Nicolas Dichtel Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/route.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index fb29e2215a19..854e4018d205 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -226,7 +226,7 @@ static struct rt6_info ip6_null_entry_template = { .dst = { .__refcnt = ATOMIC_INIT(1), .__use = 1, - .obsolete = -1, + .obsolete = DST_OBSOLETE_FORCE_CHK, .error = -ENETUNREACH, .input = ip6_pkt_discard, .output = ip6_pkt_discard_out, @@ -246,7 +246,7 @@ static struct rt6_info ip6_prohibit_entry_template = { .dst = { .__refcnt = ATOMIC_INIT(1), .__use = 1, - .obsolete = -1, + .obsolete = DST_OBSOLETE_FORCE_CHK, .error = -EACCES, .input = ip6_pkt_prohibit, .output = ip6_pkt_prohibit_out, @@ -261,7 +261,7 @@ static struct rt6_info ip6_blk_hole_entry_template = { .dst = { .__refcnt = ATOMIC_INIT(1), .__use = 1, - .obsolete = -1, + .obsolete = DST_OBSOLETE_FORCE_CHK, .error = -EINVAL, .input = dst_discard, .output = dst_discard, -- cgit v1.2.3 From 864745d291b5ba80ea0bd0edcbe67273de368836 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Thu, 13 Sep 2012 11:41:26 +0000 Subject: xfrm_user: return error pointer instead of NULL When dump_one_state() returns an error, e.g. because of a too small buffer to dump the whole xfrm state, xfrm_state_netlink() returns NULL instead of an error pointer. But its callers expect an error pointer and therefore continue to operate on a NULL skbuff. This could lead to a privilege escalation (execution of user code in kernel context) if the attacker has CAP_NET_ADMIN and is able to map address 0. Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller --- net/xfrm/xfrm_user.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index e75d8e47f35c..dac08e2a5a93 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -878,6 +878,7 @@ static struct sk_buff *xfrm_state_netlink(struct sk_buff *in_skb, { struct xfrm_dump_info info; struct sk_buff *skb; + int err; skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC); if (!skb) @@ -888,9 +889,10 @@ static struct sk_buff *xfrm_state_netlink(struct sk_buff *in_skb, info.nlmsg_seq = seq; info.nlmsg_flags = 0; - if (dump_one_state(x, 0, &info)) { + err = dump_one_state(x, 0, &info); + if (err) { kfree_skb(skb); - return NULL; + return ERR_PTR(err); } return skb; -- cgit v1.2.3 From c25463722509fef0ed630b271576a8c9a70236f3 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Fri, 14 Sep 2012 09:58:32 +0000 Subject: xfrm_user: return error pointer instead of NULL #2 When dump_one_policy() returns an error, e.g. because of a too small buffer to dump the whole xfrm policy, xfrm_policy_netlink() returns NULL instead of an error pointer. But its caller expects an error pointer and therefore continues to operate on a NULL skbuff. Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller --- net/xfrm/xfrm_user.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index dac08e2a5a93..d12b62547ad0 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1548,6 +1548,7 @@ static struct sk_buff *xfrm_policy_netlink(struct sk_buff *in_skb, { struct xfrm_dump_info info; struct sk_buff *skb; + int err; skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); if (!skb) @@ -1558,9 +1559,10 @@ static struct sk_buff *xfrm_policy_netlink(struct sk_buff *in_skb, info.nlmsg_seq = seq; info.nlmsg_flags = 0; - if (dump_one_policy(xp, dir, 0, &info) < 0) { + err = dump_one_policy(xp, dir, 0, &info); + if (err) { kfree_skb(skb); - return NULL; + return ERR_PTR(err); } return skb; -- cgit v1.2.3 From e488921f44765e8ab6c48ca35e3f6b78df9819df Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Thu, 13 Sep 2012 12:59:44 +0000 Subject: bnx2x: fix rx checksum validation for IPv6 Commit d6cb3e41 "bnx2x: fix checksum validation" caused a performance regression for IPv6. Rx checksum offload does not work. IPv6 packets are passed to the stack with CHECKSUM_NONE. The hardware obviously cannot perform IP checksum validation for IPv6, because there is no checksum in the IPv6 header. This should not prevent us from setting CHECKSUM_UNNECESSARY. Tested on BCM57711. Signed-off-by: Michal Schmidt Acked-by: Eric Dumazet Acked-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index af20c6ee2cd9..e8e97a7d1d06 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -662,14 +662,16 @@ void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe, struct bnx2x_fastpath *fp, struct bnx2x_eth_q_stats *qstats) { - /* Do nothing if no IP/L4 csum validation was done */ - + /* Do nothing if no L4 csum validation was done. + * We do not check whether IP csum was validated. For IPv4 we assume + * that if the card got as far as validating the L4 csum, it also + * validated the IP csum. IPv6 has no IP csum. + */ if (cqe->fast_path_cqe.status_flags & - (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG | - ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)) + ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) return; - /* If both IP/L4 validation were done, check if an error was found. */ + /* If L4 validation was done, check if an error was found. */ if (cqe->fast_path_cqe.type_error_flags & (ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG | -- cgit v1.2.3 From 3ceefe4319636d89d4bdf40dca9471970f942e4f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 11 Sep 2012 13:43:17 -0700 Subject: hwmon: (ad7314) Add 'name' sysfs attribute The 'name' sysfs attribute is mandatory for hwmon devices, but was missing in this driver. Cc: Jonathan Cameron Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Acked-by: Jonathan Cameron --- drivers/hwmon/ad7314.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c index cfec802cf9ca..f915eb1c29f7 100644 --- a/drivers/hwmon/ad7314.c +++ b/drivers/hwmon/ad7314.c @@ -87,10 +87,18 @@ static ssize_t ad7314_show_temperature(struct device *dev, } } +static ssize_t ad7314_show_name(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + return sprintf(buf, "%s\n", to_spi_device(dev)->modalias); +} + +static DEVICE_ATTR(name, S_IRUGO, ad7314_show_name, NULL); static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ad7314_show_temperature, NULL, 0); static struct attribute *ad7314_attributes[] = { + &dev_attr_name.attr, &sensor_dev_attr_temp1_input.dev_attr.attr, NULL, }; -- cgit v1.2.3 From 521cf6489269f5b223c24857d99c779e91f42d3e Mon Sep 17 00:00:00 2001 From: Parag Warudkar Date: Mon, 17 Sep 2012 17:49:55 +0200 Subject: hwmon: (applesmc) Bump max wait A heavy-load test on a MacBookPro6,1 is still showing a substantial amount of read errors. Increasing the maximum wait time to 128 ms resolves the issue. Signed-off-by: Parag Warudkar Signed-off-by: Henrik Rydberg Signed-off-by: Guenter Roeck --- drivers/hwmon/applesmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 282708860517..8f3f6f2c45fd 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -53,10 +53,10 @@ #define APPLESMC_MAX_DATA_LENGTH 32 -/* wait up to 32 ms for a status change. */ +/* wait up to 128 ms for a status change. */ #define APPLESMC_MIN_WAIT 0x0010 #define APPLESMC_RETRY_WAIT 0x0100 -#define APPLESMC_MAX_WAIT 0x8000 +#define APPLESMC_MAX_WAIT 0x20000 #define APPLESMC_READ_CMD 0x10 #define APPLESMC_WRITE_CMD 0x11 -- cgit v1.2.3 From e4d1aa40e363ed3e0486aeeeb0d173f7f822737e Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Fri, 14 Sep 2012 05:50:03 +0000 Subject: netxen: check for root bus in netxen_mask_aer_correctable Add a check if pdev->bus->self == NULL (root bus). When attaching a netxen NIC to a VM it can be on the root bus and the guest would crash in netxen_mask_aer_correctable() because of a NULL pointer dereference if CONFIG_PCIEAER is present. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c index 342b3a79bd0f..a77c558d8f40 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c @@ -1378,6 +1378,10 @@ static void netxen_mask_aer_correctable(struct netxen_adapter *adapter) struct pci_dev *root = pdev->bus->self; u32 aer_pos; + /* root bus? */ + if (!root) + return; + if (adapter->ahw.board_type != NETXEN_BRDTYPE_P3_4_GB_MM && adapter->ahw.board_type != NETXEN_BRDTYPE_P3_10G_TP) return; -- cgit v1.2.3 From 0e698bf6624c469cd4f3f391247b142963ca9c4e Mon Sep 17 00:00:00 2001 From: Michael S. Tsirkin Date: Sat, 15 Sep 2012 22:44:16 +0000 Subject: net: fix memory leak on oom with zerocopy If orphan flags fails, we don't free the skb on receive, which leaks the skb memory. Return value was also wrong: netif_receive_skb is supposed to return NET_RX_DROP, not ENOMEM. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index d7fe32c946c1..ac7609d85187 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3322,7 +3322,7 @@ ncls: if (pt_prev) { if (unlikely(skb_orphan_frags(skb, GFP_ATOMIC))) - ret = -ENOMEM; + goto drop; else ret = pt_prev->func(skb, skb->dev, pt_prev, orig_dev); } else { -- cgit v1.2.3 From 1d57f19539c074105791da6384a8ad674bba8037 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 17 Sep 2012 12:51:39 +0000 Subject: tcp: fix regression in urgent data handling Stephan Springl found that commit 1402d366019fed "tcp: introduce tcp_try_coalesce" introduced a regression for rlogin It turns out problem comes from TCP urgent data handling and a change in behavior in input path. rlogin sends two one-byte packets with URG ptr set, and when next data frame is coalesced, we lack sk_data_ready() calls to wakeup consumer. Signed-off-by: Eric Dumazet Reported-by: Stephan Springl Cc: Alexander Duyck Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 6e38c6c23caa..d377f4854cb8 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4661,7 +4661,7 @@ queue_and_out: if (eaten > 0) kfree_skb_partial(skb, fragstolen); - else if (!sock_flag(sk, SOCK_DEAD)) + if (!sock_flag(sk, SOCK_DEAD)) sk->sk_data_ready(sk, 0); return; } @@ -5556,8 +5556,7 @@ no_ack: #endif if (eaten) kfree_skb_partial(skb, fragstolen); - else - sk->sk_data_ready(sk, 0); + sk->sk_data_ready(sk, 0); return 0; } } -- cgit v1.2.3 From 433a19548061bb5457b6ab77ed7ea58ca6e43ddb Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Mon, 17 Sep 2012 22:40:10 +0000 Subject: xfrm: fix a read lock imbalance in make_blackhole if xfrm_policy_get_afinfo returns 0, it has already released the read lock, xfrm_policy_put_afinfo should not be called again. Signed-off-by: Li RongQing Signed-off-by: David S. Miller --- net/xfrm/xfrm_policy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index ab2ce7d5152d..387848e90078 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1764,7 +1764,7 @@ static struct dst_entry *make_blackhole(struct net *net, u16 family, if (!afinfo) { dst_release(dst_orig); - ret = ERR_PTR(-EINVAL); + return ERR_PTR(-EINVAL); } else { ret = afinfo->blackhole_route(net, dst_orig); } -- cgit v1.2.3 From 59d86c760fbb855d9a26b9b280d4ff59303f2fc5 Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Sat, 15 Sep 2012 10:16:57 +0000 Subject: e1000: Small packets may get corrupted during padding by HW On PCI/PCI-X HW, if packet size is less than ETH_ZLEN, packets may get corrupted during padding by HW. To WA this issue, pad all small packets manually. Signed-off-by: Tushar Dave Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e1000/e1000_main.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 3bfbb8df8989..bde337ee1a34 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -3149,6 +3149,17 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, return NETDEV_TX_OK; } + /* On PCI/PCI-X HW, if packet size is less than ETH_ZLEN, + * packets may get corrupted during padding by HW. + * To WA this issue, pad all small packets manually. + */ + if (skb->len < ETH_ZLEN) { + if (skb_pad(skb, ETH_ZLEN - skb->len)) + return NETDEV_TX_OK; + skb->len = ETH_ZLEN; + skb_set_tail_pointer(skb, ETH_ZLEN); + } + mss = skb_shinfo(skb)->gso_size; /* The controller does a simple calculation to * make sure there is enough room in the FIFO before -- cgit v1.2.3 From c73f693989d7a7d99ec66a7065295a0c93d0b127 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 18 Sep 2012 14:21:01 -0400 Subject: cifs: fix return value in cifsConvertToUTF16 This function returns the wrong value, which causes the callers to get the length of the resulting pathname wrong when it contains non-ASCII characters. This seems to fix https://bugzilla.samba.org/show_bug.cgi?id=6767 Cc: Reported-by: Baldvin Kovacs Reported-and-Tested-by: Nicolas Lefebvre Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_unicode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c index 7dab9c04ad52..53cf2aabce87 100644 --- a/fs/cifs/cifs_unicode.c +++ b/fs/cifs/cifs_unicode.c @@ -328,7 +328,7 @@ cifsConvertToUTF16(__le16 *target, const char *source, int srclen, } ctoUTF16_out: - return i; + return j; } #ifdef CONFIG_CIFS_SMB2 -- cgit v1.2.3 From 0ba6e5368c302819da7aff537e0d7eff2616c6a6 Mon Sep 17 00:00:00 2001 From: Ben Myers Date: Thu, 13 Sep 2012 16:18:47 -0500 Subject: xfs: stop the sync worker before xfs_unmountfs Cancel work of the xfs_sync_worker before teardown of the log in xfs_unmountfs. This prevents occasional crashes on unmount like so: PID: 21602 TASK: ee9df060 CPU: 0 COMMAND: "kworker/0:3" #0 [c5377d28] crash_kexec at c0292c94 #1 [c5377d80] oops_end at c07090c2 #2 [c5377d98] no_context at c06f614e #3 [c5377dbc] __bad_area_nosemaphore at c06f6281 #4 [c5377df4] bad_area_nosemaphore at c06f629b #5 [c5377e00] do_page_fault at c070b0cb #6 [c5377e7c] error_code (via page_fault) at c070892c EAX: f300c6a8 EBX: f300c6a8 ECX: 000000c0 EDX: 000000c0 EBP: c5377ed0 DS: 007b ESI: 00000000 ES: 007b EDI: 00000001 GS: ffffad20 CS: 0060 EIP: c0481ad0 ERR: ffffffff EFLAGS: 00010246 #7 [c5377eb0] atomic64_read_cx8 at c0481ad0 #8 [c5377ebc] xlog_assign_tail_lsn_locked at f7cc7c6e [xfs] #9 [c5377ed4] xfs_trans_ail_delete_bulk at f7ccd520 [xfs] #10 [c5377f0c] xfs_buf_iodone at f7ccb602 [xfs] #11 [c5377f24] xfs_buf_do_callbacks at f7cca524 [xfs] #12 [c5377f30] xfs_buf_iodone_callbacks at f7cca5da [xfs] #13 [c5377f4c] xfs_buf_iodone_work at f7c718d0 [xfs] #14 [c5377f58] process_one_work at c024ee4c #15 [c5377f98] worker_thread at c024f43d #16 [c5377fbc] kthread at c025326b #17 [c5377fe8] kernel_thread_helper at c070e834 PID: 26653 TASK: e79143b0 CPU: 3 COMMAND: "umount" #0 [cde0fda0] __schedule at c0706595 #1 [cde0fe28] schedule at c0706b89 #2 [cde0fe30] schedule_timeout at c0705600 #3 [cde0fe94] __down_common at c0706098 #4 [cde0fec8] __down at c0706122 #5 [cde0fed0] down at c025936f #6 [cde0fee0] xfs_buf_lock at f7c7131d [xfs] #7 [cde0ff00] xfs_freesb at f7cc2236 [xfs] #8 [cde0ff10] xfs_fs_put_super at f7c80f21 [xfs] #9 [cde0ff1c] generic_shutdown_super at c0333d7a #10 [cde0ff38] kill_block_super at c0333e0f #11 [cde0ff48] deactivate_locked_super at c0334218 #12 [cde0ff58] deactivate_super at c033495d #13 [cde0ff68] mntput_no_expire at c034bc13 #14 [cde0ff7c] sys_umount at c034cc69 #15 [cde0ffa0] sys_oldumount at c034ccd4 #16 [cde0ffb0] system_call at c0707e66 commit 11159a05 added this to xfs_log_unmount and needs to be cleaned up at a later date. Signed-off-by: Ben Myers Reviewed-by: Dave Chinner Reviewed-by: Mark Tinguely --- fs/xfs/xfs_super.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c index bdaf4cb9f4a2..19e2380fb867 100644 --- a/fs/xfs/xfs_super.c +++ b/fs/xfs/xfs_super.c @@ -919,6 +919,7 @@ xfs_fs_put_super( struct xfs_mount *mp = XFS_M(sb); xfs_filestream_unmount(mp); + cancel_delayed_work_sync(&mp->m_sync_work); xfs_unmountfs(mp); xfs_syncd_stop(mp); xfs_freesb(mp); -- cgit v1.2.3 From 3d1cbdd6aefff711bcf389fdabc4af9bc22e8201 Mon Sep 17 00:00:00 2001 From: Andrzej Kaczmarek Date: Wed, 29 Aug 2012 10:02:08 +0200 Subject: Bluetooth: mgmt: Fix enabling SSP while powered off When new BT USB adapter is plugged in it's configured while still being powered off (HCI_AUTO_OFF flag is set), thus Set SSP will only set dev_flags but won't write changes to controller. As a result remote devices won't use Secure Simple Pairing with our device due to SSP Host Support flag disabled in extended features and may also reject SSP attempt from our side (with possible fallback to legacy pairing). This patch ensures HCI Write Simple Pairing Mode is sent when Set Powered is called to power on controller and clear HCI_AUTO_OFF flag. Signed-off-by: Andrzej Kaczmarek Cc: stable@vger.kernel.org Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- net/bluetooth/mgmt.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index ad6613d17ca6..f943bbfc9c61 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2875,6 +2875,12 @@ int mgmt_powered(struct hci_dev *hdev, u8 powered) if (scan) hci_send_cmd(hdev, HCI_OP_WRITE_SCAN_ENABLE, 1, &scan); + if (test_bit(HCI_SSP_ENABLED, &hdev->dev_flags)) { + u8 ssp = 1; + + hci_send_cmd(hdev, HCI_OP_WRITE_SSP_MODE, 1, &ssp); + } + update_class(hdev); update_name(hdev, hdev->dev_name); update_eir(hdev); -- cgit v1.2.3 From 562fcc246ebe31ade6e1be08585673b9b2785498 Mon Sep 17 00:00:00 2001 From: Andrzej Kaczmarek Date: Wed, 29 Aug 2012 10:02:09 +0200 Subject: Bluetooth: mgmt: Fix enabling LE while powered off When new BT USB adapter is plugged in it's configured while still being powered off (HCI_AUTO_OFF flag is set), thus Set LE will only set dev_flags but won't write changes to controller. As a result it's not possible to start device discovery session on LE controller as it uses interleaved discovery which requires LE Supported Host flag in extended features. This patch ensures HCI Write LE Host Supported is sent when Set Powered is called to power on controller and clear HCI_AUTO_OFF flag. Signed-off-by: Andrzej Kaczmarek Cc: stable@vger.kernel.org Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- net/bluetooth/mgmt.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index f943bbfc9c61..eba022de3c20 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2881,6 +2881,16 @@ int mgmt_powered(struct hci_dev *hdev, u8 powered) hci_send_cmd(hdev, HCI_OP_WRITE_SSP_MODE, 1, &ssp); } + if (test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) { + struct hci_cp_write_le_host_supported cp; + + cp.le = 1; + cp.simul = !!(hdev->features[6] & LMP_SIMUL_LE_BR); + + hci_send_cmd(hdev, HCI_OP_WRITE_LE_HOST_SUPPORTED, + sizeof(cp), &cp); + } + update_class(hdev); update_name(hdev, hdev->dev_name); update_eir(hdev); -- cgit v1.2.3 From aad3d0e343900a4c2c5dbc73f76550aa64a0ac1b Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 6 Sep 2012 15:05:42 +0300 Subject: Bluetooth: Fix freeing uninitialized delayed works When releasing L2CAP socket which is in BT_CONFIG state l2cap_chan_close invokes l2cap_send_disconn_req which cancel delayed works which are only set in BT_CONNECTED state with l2cap_ertm_init. Add state check before cancelling those works. ... [ 9668.574372] [21085] l2cap_sock_release: sock cd065200, sk f073e800 [ 9668.574399] [21085] l2cap_sock_shutdown: sock cd065200, sk f073e800 [ 9668.574411] [21085] l2cap_chan_close: chan f073ec00 state BT_CONFIG sk f073e800 [ 9668.574421] [21085] l2cap_send_disconn_req: chan f073ec00 conn ecc16600 [ 9668.574441] INFO: trying to register non-static key. [ 9668.574443] the code is fine but needs lockdep annotation. [ 9668.574446] turning off the locking correctness validator. [ 9668.574450] Pid: 21085, comm: obex-client Tainted: G O 3.5.0+ #57 [ 9668.574452] Call Trace: [ 9668.574463] [] __lock_acquire+0x12e3/0x1700 [ 9668.574468] [] ? trace_hardirqs_on+0xb/0x10 [ 9668.574476] [] ? printk+0x4d/0x4f [ 9668.574479] [] lock_acquire+0x88/0x130 [ 9668.574487] [] ? try_to_del_timer_sync+0x60/0x60 [ 9668.574491] [] del_timer_sync+0x50/0xc0 [ 9668.574495] [] ? try_to_del_timer_sync+0x60/0x60 [ 9668.574515] [] l2cap_send_disconn_req+0xe3/0x160 [bluetooth] ... Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- net/bluetooth/l2cap_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 4ea1710a4783..38c00f142203 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -1008,7 +1008,7 @@ static void l2cap_send_disconn_req(struct l2cap_conn *conn, struct l2cap_chan *c if (!conn) return; - if (chan->mode == L2CAP_MODE_ERTM) { + if (chan->mode == L2CAP_MODE_ERTM && chan->state == BT_CONNECTED) { __clear_retrans_timer(chan); __clear_monitor_timer(chan); __clear_ack_timer(chan); -- cgit v1.2.3 From 78c04c0bf52360dc2f7185e99c8e9aa05d73ae5a Mon Sep 17 00:00:00 2001 From: Vinicius Costa Gomes Date: Fri, 14 Sep 2012 16:34:46 -0300 Subject: Bluetooth: Fix not removing power_off delayed work For example, when a usb reset is received (I could reproduce it running something very similar to this[1] in a loop) it could be that the device is unregistered while the power_off delayed work is still scheduled to run. Backtrace: WARNING: at lib/debugobjects.c:261 debug_print_object+0x7c/0x8d() Hardware name: To Be Filled By O.E.M. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x26 Modules linked in: nouveau mxm_wmi btusb wmi bluetooth ttm coretemp drm_kms_helper Pid: 2114, comm: usb-reset Not tainted 3.5.0bt-next #2 Call Trace: [] ? free_obj_work+0x57/0x91 [] warn_slowpath_common+0x7e/0x97 [] warn_slowpath_fmt+0x41/0x43 [] debug_print_object+0x7c/0x8d [] ? __queue_work+0x259/0x259 [] ? debug_check_no_obj_freed+0x6f/0x1b5 [] debug_check_no_obj_freed+0x98/0x1b5 [] ? bt_host_release+0x10/0x1e [bluetooth] [] kfree+0x90/0xe6 [] bt_host_release+0x10/0x1e [bluetooth] [] device_release+0x4a/0x7e [] kobject_release+0x11d/0x154 [] kobject_put+0x4a/0x4f [] put_device+0x12/0x14 [] hci_free_dev+0x22/0x26 [bluetooth] [] btusb_disconnect+0x96/0x9f [btusb] [] usb_unbind_interface+0x57/0x106 [] __device_release_driver+0x83/0xd6 [] device_release_driver+0x20/0x2d [] usb_driver_release_interface+0x44/0x7b [] usb_forced_unbind_intf+0x45/0x4e [] usb_reset_device+0xa6/0x12e [] usbdev_do_ioctl+0x319/0xe20 [] ? avc_has_perm_flags+0xc9/0x12e [] ? avc_has_perm_flags+0x25/0x12e [] ? do_page_fault+0x31e/0x3a1 [] usbdev_ioctl+0x9/0xd [] vfs_ioctl+0x21/0x34 [] do_vfs_ioctl+0x408/0x44b [] ? file_has_perm+0x76/0x81 [] sys_ioctl+0x51/0x76 [] system_call_fastpath+0x16/0x1b [1] http://cpansearch.perl.org/src/DPAVLIN/Biblio-RFID-0.03/examples/usbreset.c Signed-off-by: Vinicius Costa Gomes Cc: stable@vger.kernel.org Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index d4de5db18d5a..0b997c8f9655 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -734,6 +734,8 @@ static int hci_dev_do_close(struct hci_dev *hdev) cancel_work_sync(&hdev->le_scan); + cancel_delayed_work(&hdev->power_off); + hci_req_cancel(hdev, ENODEV); hci_req_lock(hdev); -- cgit v1.2.3 From a85d0d7f3460b1a123b78e7f7e39bf72c37dfb78 Mon Sep 17 00:00:00 2001 From: Luis R. Rodriguez Date: Fri, 14 Sep 2012 15:36:57 -0700 Subject: cfg80211: fix possible circular lock on reg_regdb_search() When call_crda() is called we kick off a witch hunt search for the same regulatory domain on our internal regulatory database and that work gets kicked off on a workqueue, this is done while the cfg80211_mutex is held. If that workqueue kicks off it will first lock reg_regdb_search_mutex and later cfg80211_mutex but to ensure two CPUs will not contend against cfg80211_mutex the right thing to do is to have the reg_regdb_search() wait until the cfg80211_mutex is let go. The lockdep report is pasted below. cfg80211: Calling CRDA to update world regulatory domain ====================================================== [ INFO: possible circular locking dependency detected ] 3.3.8 #3 Tainted: G O ------------------------------------------------------- kworker/0:1/235 is trying to acquire lock: (cfg80211_mutex){+.+...}, at: [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] but task is already holding lock: (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (reg_regdb_search_mutex){+.+...}: [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<81645778>] is_world_regdom+0x9f8/0xc74 [cfg80211] -> #1 (reg_mutex#2){+.+...}: [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<8164539c>] is_world_regdom+0x61c/0xc74 [cfg80211] -> #0 (cfg80211_mutex){+.+...}: [<800a77b8>] __lock_acquire+0x10d4/0x17bc [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] other info that might help us debug this: Chain exists of: cfg80211_mutex --> reg_mutex#2 --> reg_regdb_search_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(reg_regdb_search_mutex); lock(reg_mutex#2); lock(reg_regdb_search_mutex); lock(cfg80211_mutex); *** DEADLOCK *** 3 locks held by kworker/0:1/235: #0: (events){.+.+..}, at: [<80089a00>] process_one_work+0x230/0x460 #1: (reg_regdb_work){+.+...}, at: [<80089a00>] process_one_work+0x230/0x460 #2: (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211] stack backtrace: Call Trace: [<80290fd4>] dump_stack+0x8/0x34 [<80291bc4>] print_circular_bug+0x2ac/0x2d8 [<800a77b8>] __lock_acquire+0x10d4/0x17bc [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] Reported-by: Felix Fietkau Tested-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/reg.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2ded3c7fad06..72d170ca3406 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -350,6 +350,9 @@ static void reg_regdb_search(struct work_struct *work) struct reg_regdb_search_request *request; const struct ieee80211_regdomain *curdom, *regdom; int i, r; + bool set_reg = false; + + mutex_lock(&cfg80211_mutex); mutex_lock(®_regdb_search_mutex); while (!list_empty(®_regdb_search_list)) { @@ -365,9 +368,7 @@ static void reg_regdb_search(struct work_struct *work) r = reg_copy_regd(®dom, curdom); if (r) break; - mutex_lock(&cfg80211_mutex); - set_regdom(regdom); - mutex_unlock(&cfg80211_mutex); + set_reg = true; break; } } @@ -375,6 +376,11 @@ static void reg_regdb_search(struct work_struct *work) kfree(request); } mutex_unlock(®_regdb_search_mutex); + + if (set_reg) + set_regdom(regdom); + + mutex_unlock(&cfg80211_mutex); } static DECLARE_WORK(reg_regdb_work, reg_regdb_search); -- cgit v1.2.3 From a7be50b7e30f9d77cb059a7ffdb781bb0fb92eba Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 18 Sep 2012 19:48:59 +0200 Subject: iwlwifi: don't double free the interrupt in failure path When the driver can't get the HW ready, we would release the interrupt twice which made the kernel complain loudly. Cc: stable@vger.kernel.org Reported-by: Brian Cockrell Tested-by: Brian Cockrell Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/pcie/trans.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 1e86ea2266d4..dbeebef562d5 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1442,6 +1442,7 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) return err; err_free_irq: + trans_pcie->irq_requested = false; free_irq(trans_pcie->irq, trans); error: iwl_free_isr_ict(trans); -- cgit v1.2.3 From a852d7b8a0cf29499905c9243fa6d3fb93898b82 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 19 Sep 2012 12:48:30 +1000 Subject: Revert "md/raid5: For odirect-write performance, do not set STRIPE_PREREAD_ACTIVE." This reverts commit 895e3c5c58a80bb9e4e05d9ac38b4f30e0f97d80. While this patch seemed like a good idea and did help some workloads, it hurts other workloads. Large sequential O_DIRECT writes were faster, Small random O_DIRECT writes were slower. Other changes (batching RAID5 writes) have improved the sequential writes using a different mechanism, so the net result of this patch is definitely negative. So revert it. Reported-by: Shaohua Li Tested-by: Jianpeng Ma Signed-off-by: NeilBrown --- drivers/md/raid5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index adda94df5eb2..380cb68856b1 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4192,7 +4192,7 @@ static void make_request(struct mddev *mddev, struct bio * bi) finish_wait(&conf->wait_for_overlap, &w); set_bit(STRIPE_HANDLE, &sh->state); clear_bit(STRIPE_DELAYED, &sh->state); - if ((bi->bi_rw & REQ_NOIDLE) && + if ((bi->bi_rw & REQ_SYNC) && !test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) atomic_inc(&conf->preread_active_stripes); release_stripe_plug(mddev, sh); -- cgit v1.2.3 From e5c86471f933608db5d43679f84cb4346c32033e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 19 Sep 2012 12:52:30 +1000 Subject: md/raid5: fix calculate of 'degraded' when a replacement becomes active. When a replacement device becomes active, we mark the device that it replaces as 'faulty' so that it can subsequently get removed. However 'calc_degraded' only pays attention to the primary device, not the replacement, so the array appears to become degraded, which is wrong. So teach 'calc_degraded' to consider any replacement if a primary device is faulty. This is suitable for -stable as an incorrect 'degraded' value can confuse md and could lead to data corruption. This is only relevant for 3.3 and later. Cc: stable@vger.kernel.org Reported-by: Robin Hill Reported-by: John Drescher Signed-off-by: NeilBrown --- drivers/md/raid5.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 380cb68856b1..7031b865b3a0 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -393,6 +393,8 @@ static int calc_degraded(struct r5conf *conf) degraded = 0; for (i = 0; i < conf->previous_raid_disks; i++) { struct md_rdev *rdev = rcu_dereference(conf->disks[i].rdev); + if (rdev && test_bit(Faulty, &rdev->flags)) + rdev = rcu_dereference(conf->disks[i].replacement); if (!rdev || test_bit(Faulty, &rdev->flags)) degraded++; else if (test_bit(In_sync, &rdev->flags)) @@ -417,6 +419,8 @@ static int calc_degraded(struct r5conf *conf) degraded2 = 0; for (i = 0; i < conf->raid_disks; i++) { struct md_rdev *rdev = rcu_dereference(conf->disks[i].rdev); + if (rdev && test_bit(Faulty, &rdev->flags)) + rdev = rcu_dereference(conf->disks[i].replacement); if (!rdev || test_bit(Faulty, &rdev->flags)) degraded2++; else if (test_bit(In_sync, &rdev->flags)) -- cgit v1.2.3 From 6dafab6b1383e912cd252fa809570b484eb6e0dc Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 19 Sep 2012 12:54:22 +1000 Subject: md: make sure metadata is updated when spares are activated or removed. It isn't always necessary to update the metadata when spares are removed as the presence-or-not of a spare isn't really important to the integrity of an array. Also activating a spare doesn't always require updating the metadata as the update on 'recovery-completed' is usually sufficient. However the introduction of 'replacement' devices have made these transitions sometimes more important. For example the 'Replacement' flag isn't cleared until the original device is removed, so we need to ensure a metadata update after that 'spare' is removed. So set MD_CHANGE_DEVS whenever a spare is activated or removed, to complement the current situation where it is set when a spare is added or a device is failed (or a number of other less common situations). This is suitable for -stable as out-of-data metadata could lead to data corruption. This is only relevant for 3.3 and later 9when 'replacement' as introduced. Cc: stable@vger.kernel.org Signed-off-by: NeilBrown --- drivers/md/md.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 3f6203a4c7ea..308e87b417e0 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7619,6 +7619,8 @@ static int remove_and_add_spares(struct mddev *mddev) } } } + if (removed) + set_bit(MD_CHANGE_DEVS, &mddev->flags); return spares; } @@ -7632,9 +7634,11 @@ static void reap_sync_thread(struct mddev *mddev) !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { /* success...*/ /* activate any spares */ - if (mddev->pers->spare_active(mddev)) + if (mddev->pers->spare_active(mddev)) { sysfs_notify(&mddev->kobj, NULL, "degraded"); + set_bit(MD_CHANGE_DEVS, &mddev->flags); + } } if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && mddev->pers->finish_reshape) -- cgit v1.2.3 From 263a523d18bca306016d75f5c8d5c57c37fe52fb Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 18 Sep 2012 20:42:31 -0700 Subject: linux/kernel.h: Fix warning seen with W=1 due to change in DIV_ROUND_CLOSEST After commit b6d86d3d (Fix DIV_ROUND_CLOSEST to support negative dividends), the following warning is seen if the kernel is compiled with W=1 (-Wextra): warning: comparison of unsigned expression >= 0 is always true The warning is due to the test '((typeof(x))-1) >= 0', which is used to detect if the variable type is unsigned. Research on the web suggests that the warning disappears if '>' instead of '>=' is used for the comparison. Tests after changing the macro along that line show that the warning is gone, and that the result is still correct: i=-4: DIV_ROUND_CLOSEST(i, 2)=-2 i=-3: DIV_ROUND_CLOSEST(i, 2)=-2 i=-2: DIV_ROUND_CLOSEST(i, 2)=-1 i=-1: DIV_ROUND_CLOSEST(i, 2)=-1 i=0: DIV_ROUND_CLOSEST(i, 2)=0 i=1: DIV_ROUND_CLOSEST(i, 2)=1 i=2: DIV_ROUND_CLOSEST(i, 2)=1 i=3: DIV_ROUND_CLOSEST(i, 2)=2 i=4: DIV_ROUND_CLOSEST(i, 2)=2 Code size is the same as before. Signed-off-by: Guenter Roeck Tested-by: Mauro Carvalho Chehab Acked-by: Jean Delvare --- include/linux/kernel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 594b419b7d20..2451f1f7a1d9 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -91,7 +91,7 @@ { \ typeof(x) __x = x; \ typeof(divisor) __d = divisor; \ - (((typeof(x))-1) >= 0 || (__x) >= 0) ? \ + (((typeof(x))-1) > 0 || (__x) > 0) ? \ (((__x) + ((__d) / 2)) / (__d)) : \ (((__x) - ((__d) / 2)) / (__d)); \ } \ -- cgit v1.2.3 From 20a36e39d59757252edbbdcf9574ae2998733ce9 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Tue, 11 Sep 2012 01:07:01 +0200 Subject: perf/x86: Fix Intel Ivy Bridge support This patch updates the existing Intel IvyBridge (model 58) support with proper PEBS event constraints. It cannot reuse the same as SandyBridge because some events (0xd3) are specific to IvyBridge. Also there is no UOPS_DISPATCHED.THREAD on IVB, so do not populate the PERF_COUNT_HW_STALLED_CYCLES_BACKEND mapping. Signed-off-by: Stephane Eranian Cc: peterz@infradead.org Cc: ak@linux.intel.com Link: http://lkml.kernel.org/r/20120910230701.GA5898@quad Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event.h | 2 ++ arch/x86/kernel/cpu/perf_event_intel.c | 24 +++++++++++++++++++++++- arch/x86/kernel/cpu/perf_event_intel_ds.c | 14 ++++++++++++++ 3 files changed, 39 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index 6605a81ba339..8b6defe7eefc 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -586,6 +586,8 @@ extern struct event_constraint intel_westmere_pebs_event_constraints[]; extern struct event_constraint intel_snb_pebs_event_constraints[]; +extern struct event_constraint intel_ivb_pebs_event_constraints[]; + struct event_constraint *intel_pebs_constraints(struct perf_event *event); void intel_pmu_pebs_enable(struct perf_event *event); diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 0d3d63afa76a..6bca492b8547 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -2048,7 +2048,6 @@ __init int intel_pmu_init(void) case 42: /* SandyBridge */ case 45: /* SandyBridge, "Romely-EP" */ x86_add_quirk(intel_sandybridge_quirk); - case 58: /* IvyBridge */ memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, sizeof(hw_cache_event_ids)); memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs, @@ -2073,6 +2072,29 @@ __init int intel_pmu_init(void) pr_cont("SandyBridge events, "); break; + case 58: /* IvyBridge */ + memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, + sizeof(hw_cache_event_ids)); + memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs, + sizeof(hw_cache_extra_regs)); + + intel_pmu_lbr_init_snb(); + + x86_pmu.event_constraints = intel_snb_event_constraints; + x86_pmu.pebs_constraints = intel_ivb_pebs_event_constraints; + x86_pmu.pebs_aliases = intel_pebs_aliases_snb; + x86_pmu.extra_regs = intel_snb_extra_regs; + /* all extra regs are per-cpu when HT is on */ + x86_pmu.er_flags |= ERF_HAS_RSP_1; + x86_pmu.er_flags |= ERF_NO_HT_SHARING; + + /* UOPS_ISSUED.ANY,c=1,i=1 to count stall cycles */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = + X86_CONFIG(.event=0x0e, .umask=0x01, .inv=1, .cmask=1); + + pr_cont("IvyBridge events, "); + break; + default: switch (x86_pmu.version) { diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index e38d97bf4259..826054a4f2ee 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -407,6 +407,20 @@ struct event_constraint intel_snb_pebs_event_constraints[] = { EVENT_CONSTRAINT_END }; +struct event_constraint intel_ivb_pebs_event_constraints[] = { + INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */ + INTEL_UEVENT_CONSTRAINT(0x01c2, 0xf), /* UOPS_RETIRED.ALL */ + INTEL_UEVENT_CONSTRAINT(0x02c2, 0xf), /* UOPS_RETIRED.RETIRE_SLOTS */ + INTEL_EVENT_CONSTRAINT(0xc4, 0xf), /* BR_INST_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xc5, 0xf), /* BR_MISP_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd0, 0xf), /* MEM_UOP_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd3, 0xf), /* MEM_LOAD_UOPS_LLC_MISS_RETIRED.* */ + EVENT_CONSTRAINT_END +}; + struct event_constraint *intel_pebs_constraints(struct perf_event *event) { struct event_constraint *c; -- cgit v1.2.3 From ed48ece27cd3d5ee0354c32bbaec0f3e1d4715c3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 18 Sep 2012 12:48:43 -0700 Subject: workqueue: reimplement work_on_cpu() using system_wq The existing work_on_cpu() implementation is hugely inefficient. It creates a new kthread, execute that single function and then let the kthread die on each invocation. Now that system_wq can handle concurrent executions, there's no advantage of doing this. Reimplement work_on_cpu() using system_wq which makes it simpler and way more efficient. stable: While this isn't a fix in itself, it's needed to fix a workqueue related bug in cpufreq/powernow-k8. AFAICS, this shouldn't break other existing users. Signed-off-by: Tejun Heo Acked-by: Jiri Kosina Cc: Linus Torvalds Cc: Bjorn Helgaas Cc: Len Brown Cc: Rafael J. Wysocki Cc: stable@vger.kernel.org --- kernel/workqueue.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index b80065a2450a..3c5a79e2134c 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -3576,18 +3576,17 @@ static int __devinit workqueue_cpu_down_callback(struct notifier_block *nfb, #ifdef CONFIG_SMP struct work_for_cpu { - struct completion completion; + struct work_struct work; long (*fn)(void *); void *arg; long ret; }; -static int do_work_for_cpu(void *_wfc) +static void work_for_cpu_fn(struct work_struct *work) { - struct work_for_cpu *wfc = _wfc; + struct work_for_cpu *wfc = container_of(work, struct work_for_cpu, work); + wfc->ret = wfc->fn(wfc->arg); - complete(&wfc->completion); - return 0; } /** @@ -3602,19 +3601,11 @@ static int do_work_for_cpu(void *_wfc) */ long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg) { - struct task_struct *sub_thread; - struct work_for_cpu wfc = { - .completion = COMPLETION_INITIALIZER_ONSTACK(wfc.completion), - .fn = fn, - .arg = arg, - }; + struct work_for_cpu wfc = { .fn = fn, .arg = arg }; - sub_thread = kthread_create(do_work_for_cpu, &wfc, "work_for_cpu"); - if (IS_ERR(sub_thread)) - return PTR_ERR(sub_thread); - kthread_bind(sub_thread, cpu); - wake_up_process(sub_thread); - wait_for_completion(&wfc.completion); + INIT_WORK_ONSTACK(&wfc.work, work_for_cpu_fn); + schedule_work_on(cpu, &wfc.work); + flush_work(&wfc.work); return wfc.ret; } EXPORT_SYMBOL_GPL(work_on_cpu); -- cgit v1.2.3 From 6889125b8b4e09c5e53e6ecab3433bed1ce198c9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 18 Sep 2012 14:24:59 -0700 Subject: cpufreq/powernow-k8: workqueue user shouldn't migrate the kworker to another CPU powernowk8_target() runs off a per-cpu work item and if the cpufreq_policy->cpu is different from the current one, it migrates the kworker to the target CPU by manipulating current->cpus_allowed. The function migrates the kworker back to the original CPU but this is still broken. Workqueue concurrency management requires the kworkers to stay on the same CPU and powernowk8_target() ends up triggerring BUG_ON(rq != this_rq()) in try_to_wake_up_local() if it contends on fidvid_mutex and sleeps. It is unclear why this bug is being reported now. Duncan says it appeared to be a regression of 3.6-rc1 and couldn't reproduce it on 3.5. Bisection seemed to point to 63d95a91 "workqueue: use @pool instead of @gcwq or @cpu where applicable" which is an non-functional change. Given that the reproduce case sometimes took upto days to trigger, it's easy to be misled while bisecting. Maybe something made contention on fidvid_mutex more likely? I don't know. This patch fixes the bug by using work_on_cpu() instead if @pol->cpu isn't the same as the current one. The code assumes that cpufreq_policy->cpu is kept online by the caller, which Rafael tells me is the case. stable: ed48ece27c ("workqueue: reimplement work_on_cpu() using system_wq") should be applied before this; otherwise, the behavior could be horrible. Signed-off-by: Tejun Heo Reported-by: Duncan <1i5t5.duncan@cox.net> Tested-by: Duncan <1i5t5.duncan@cox.net> Cc: Rafael J. Wysocki Cc: Andreas Herrmann Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47301 --- drivers/cpufreq/powernow-k8.c | 63 +++++++++++++++++++++++-------------------- 1 file changed, 34 insertions(+), 29 deletions(-) diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index c0e816468e30..1a40935c85fd 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -35,7 +35,6 @@ #include #include #include -#include /* for current / set_cpus_allowed() */ #include #include @@ -1139,16 +1138,23 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, return res; } -/* Driver entry point to switch to the target frequency */ -static int powernowk8_target(struct cpufreq_policy *pol, - unsigned targfreq, unsigned relation) +struct powernowk8_target_arg { + struct cpufreq_policy *pol; + unsigned targfreq; + unsigned relation; +}; + +static long powernowk8_target_fn(void *arg) { - cpumask_var_t oldmask; + struct powernowk8_target_arg *pta = arg; + struct cpufreq_policy *pol = pta->pol; + unsigned targfreq = pta->targfreq; + unsigned relation = pta->relation; struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); u32 checkfid; u32 checkvid; unsigned int newstate; - int ret = -EIO; + int ret; if (!data) return -EINVAL; @@ -1156,29 +1162,16 @@ static int powernowk8_target(struct cpufreq_policy *pol, checkfid = data->currfid; checkvid = data->currvid; - /* only run on specific CPU from here on. */ - /* This is poor form: use a workqueue or smp_call_function_single */ - if (!alloc_cpumask_var(&oldmask, GFP_KERNEL)) - return -ENOMEM; - - cpumask_copy(oldmask, tsk_cpus_allowed(current)); - set_cpus_allowed_ptr(current, cpumask_of(pol->cpu)); - - if (smp_processor_id() != pol->cpu) { - printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); - goto err_out; - } - if (pending_bit_stuck()) { printk(KERN_ERR PFX "failing targ, change pending bit set\n"); - goto err_out; + return -EIO; } pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n", pol->cpu, targfreq, pol->min, pol->max, relation); if (query_current_values_with_pending_wait(data)) - goto err_out; + return -EIO; if (cpu_family != CPU_HW_PSTATE) { pr_debug("targ: curr fid 0x%x, vid 0x%x\n", @@ -1196,7 +1189,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) - goto err_out; + return -EIO; mutex_lock(&fidvid_mutex); @@ -1209,9 +1202,8 @@ static int powernowk8_target(struct cpufreq_policy *pol, ret = transition_frequency_fidvid(data, newstate); if (ret) { printk(KERN_ERR PFX "transition frequency failed\n"); - ret = 1; mutex_unlock(&fidvid_mutex); - goto err_out; + return 1; } mutex_unlock(&fidvid_mutex); @@ -1220,12 +1212,25 @@ static int powernowk8_target(struct cpufreq_policy *pol, data->powernow_table[newstate].index); else pol->cur = find_khz_freq_from_fid(data->currfid); - ret = 0; -err_out: - set_cpus_allowed_ptr(current, oldmask); - free_cpumask_var(oldmask); - return ret; + return 0; +} + +/* Driver entry point to switch to the target frequency */ +static int powernowk8_target(struct cpufreq_policy *pol, + unsigned targfreq, unsigned relation) +{ + struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq, + .relation = relation }; + + /* + * Must run on @pol->cpu. cpufreq core is responsible for ensuring + * that we're bound to the current CPU and pol->cpu stays online. + */ + if (smp_processor_id() == pol->cpu) + return powernowk8_target_fn(&pta); + else + return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta); } /* Driver entry point to verify the policy and range of frequencies */ -- cgit v1.2.3 From 527df5fae93b755dd5c48f2f5196a11bedd93661 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 19 Sep 2012 10:23:18 -0700 Subject: Revert "input: ab8500-ponkey: Create AB8500 domain IRQ mapping" This reverts commit ca3b3faf9bee4dc5df4f10eae2d1e48f7de0a8ad. There was a plan to place ab8500_irq_get_virq() calls in each AB8500 child device prior to requesting an IRQ, but as we're no longer using Device Tree to collect our IRQ numbers, it's actually better to allow the core to do this during device registration time. So the IRQ number we pull from its resource has already been converted to a virtual IRQ. Signed-off-by: Lee Jones Acked-by: Linus Walleij Signed-off-by: Dmitry Torokhov --- drivers/input/misc/ab8500-ponkey.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/misc/ab8500-ponkey.c b/drivers/input/misc/ab8500-ponkey.c index f06231b7cab1..84ec691c05aa 100644 --- a/drivers/input/misc/ab8500-ponkey.c +++ b/drivers/input/misc/ab8500-ponkey.c @@ -74,8 +74,8 @@ static int __devinit ab8500_ponkey_probe(struct platform_device *pdev) ponkey->idev = input; ponkey->ab8500 = ab8500; - ponkey->irq_dbf = ab8500_irq_get_virq(ab8500, irq_dbf); - ponkey->irq_dbr = ab8500_irq_get_virq(ab8500, irq_dbr); + ponkey->irq_dbf = irq_dbf; + ponkey->irq_dbr = irq_dbr; input->name = "AB8500 POn(PowerOn) Key"; input->dev.parent = &pdev->dev; -- cgit v1.2.3 From bd49940a35ec7d488ae63bd625639893b3385b97 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 19 Sep 2012 08:30:55 -0400 Subject: xen/boot: Disable BIOS SMP MP table search. As the initial domain we are able to search/map certain regions of memory to harvest configuration data. For all low-level we use ACPI tables - for interrupts we use exclusively ACPI _PRT (so DSDT) and MADT for INT_SRC_OVR. The SMP MP table is not used at all. As a matter of fact we do not even support machines that only have SMP MP but no ACPI tables. Lets follow how Moorestown does it and just disable searching for BIOS SMP tables. This also fixes an issue on HP Proliant BL680c G5 and DL380 G6: 9f->100 for 1:1 PTE Freeing 9f-100 pfn range: 97 pages freed 1-1 mapping on 9f->100 .. snip.. e820: BIOS-provided physical RAM map: Xen: [mem 0x0000000000000000-0x000000000009efff] usable Xen: [mem 0x000000000009f400-0x00000000000fffff] reserved Xen: [mem 0x0000000000100000-0x00000000cfd1dfff] usable .. snip.. Scan for SMP in [mem 0x00000000-0x000003ff] Scan for SMP in [mem 0x0009fc00-0x0009ffff] Scan for SMP in [mem 0x000f0000-0x000fffff] found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0] (XEN) mm.c:908:d0 Error getting mfn 100 (pfn 5555555555555555) from L1 entry 0000000000100461 for l1e_owner=0, pg_owner=0 (XEN) mm.c:4995:d0 ptwr_emulate: could not get_page_from_l1e() BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] xen_set_pte_init+0x66/0x71 . snip.. Pid: 0, comm: swapper Not tainted 3.6.0-rc6upstream-00188-gb6fb969-dirty #2 HP ProLiant BL680c G5 .. snip.. Call Trace: [] __early_ioremap+0x18a/0x248 [] ? printk+0x48/0x4a [] early_ioremap+0x13/0x15 [] get_mpc_size+0x2f/0x67 [] smp_scan_config+0x10c/0x136 [] default_find_smp_config+0x36/0x5a [] setup_arch+0x5b3/0xb5b [] ? printk+0x48/0x4a [] start_kernel+0x90/0x390 [] x86_64_start_reservations+0x131/0x136 [] xen_start_kernel+0x65f/0x661 (XEN) Domain 0 crashed: 'noreboot' set - not rebooting. which is that ioremap would end up mapping 0xff using _PAGE_IOMAP (which is what early_ioremap sticks as a flag) - which meant we would get MFN 0xFF (pte ff461, which is OK), and then it would also map 0x100 (b/c ioremap tries to get page aligned request, and it was trying to map 0xf4fa0 + PAGE_SIZE - so it mapped the next page) as _PAGE_IOMAP. Since 0x100 is actually a RAM page, and the _PAGE_IOMAP bypasses the P2M lookup we would happily set the PTE to 1000461. Xen would deny the request since we do not have access to the Machine Frame Number (MFN) of 0x100. The P2M[0x100] is for example 0x80140. CC: stable@vger.kernel.org Fixes-Oracle-Bugzilla: https://bugzilla.oracle.com/bugzilla/show_bug.cgi?id=13665 Acked-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/enlighten.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 9642d4a38602..1fbe75a95f15 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1452,6 +1452,10 @@ asmlinkage void __init xen_start_kernel(void) pci_request_acs(); xen_acpi_sleep_register(); + + /* Avoid searching for BIOS MP tables */ + x86_init.mpparse.find_smp_config = x86_init_noop; + x86_init.mpparse.get_smp_config = x86_init_uint_noop; } #ifdef CONFIG_PCI /* PCI BIOS service won't work from a PV guest. */ -- cgit v1.2.3 From dbd6b11e15a2f96030da17dbeda943a8a98ee990 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Fri, 14 Sep 2012 00:40:54 +0000 Subject: batman-adv: make batadv_test_bit() return 0 or 1 only On some architectures test_bit() can return other values than 0 or 1: With a generic x86 OpenWrt image in a kvm setup (batadv_)test_bit() frequently returns -1 for me, leading to batadv_iv_ogm_update_seqnos() wrongly signaling a protected seqno window. This patch tries to fix this issue by making batadv_test_bit() return 0 or 1 only. Signed-off-by: Linus Lüssing Acked-by: Sven Eckelmann Signed-off-by: Antonio Quartulli Signed-off-by: David S. Miller --- net/batman-adv/bitarray.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/batman-adv/bitarray.h b/net/batman-adv/bitarray.h index a081ce1c0514..cebaae7e148b 100644 --- a/net/batman-adv/bitarray.h +++ b/net/batman-adv/bitarray.h @@ -20,8 +20,8 @@ #ifndef _NET_BATMAN_ADV_BITARRAY_H_ #define _NET_BATMAN_ADV_BITARRAY_H_ -/* returns true if the corresponding bit in the given seq_bits indicates true - * and curr_seqno is within range of last_seqno +/* Returns 1 if the corresponding bit in the given seq_bits indicates true + * and curr_seqno is within range of last_seqno. Otherwise returns 0. */ static inline int batadv_test_bit(const unsigned long *seq_bits, uint32_t last_seqno, uint32_t curr_seqno) @@ -32,7 +32,7 @@ static inline int batadv_test_bit(const unsigned long *seq_bits, if (diff < 0 || diff >= BATADV_TQ_LOCAL_WINDOW_SIZE) return 0; else - return test_bit(diff, seq_bits); + return test_bit(diff, seq_bits) != 0; } /* turn corresponding bit on, so we can remember that we got the packet */ -- cgit v1.2.3 From 15c041759bfcd9ab0a4e43f1c16e2644977d0467 Mon Sep 17 00:00:00 2001 From: Michal Kubeček Date: Fri, 14 Sep 2012 04:59:52 +0000 Subject: tcp: flush DMA queue before sk_wait_data if rcv_wnd is zero If recv() syscall is called for a TCP socket so that - IOAT DMA is used - MSG_WAITALL flag is used - requested length is bigger than sk_rcvbuf - enough data has already arrived to bring rcv_wnd to zero then when tcp_recvmsg() gets to calling sk_wait_data(), receive window can be still zero while sk_async_wait_queue exhausts enough space to keep it zero. As this queue isn't cleaned until the tcp_service_net_dma() call, sk_wait_data() cannot receive any data and blocks forever. If zero receive window and non-empty sk_async_wait_queue is detected before calling sk_wait_data(), process the queue first. Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 2109ff4a1daf..bf9a8ab29459 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1762,8 +1762,14 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, } #ifdef CONFIG_NET_DMA - if (tp->ucopy.dma_chan) - dma_async_memcpy_issue_pending(tp->ucopy.dma_chan); + if (tp->ucopy.dma_chan) { + if (tp->rcv_wnd == 0 && + !skb_queue_empty(&sk->sk_async_wait_queue)) { + tcp_service_net_dma(sk, true); + tcp_cleanup_rbuf(sk, copied); + } else + dma_async_memcpy_issue_pending(tp->ucopy.dma_chan); + } #endif if (copied >= target) { /* Do not sleep, just process backlog. */ -- cgit v1.2.3 From 71261956973ba9e0637848a5adb4a5819b4bae83 Mon Sep 17 00:00:00 2001 From: Paolo Valente Date: Sat, 15 Sep 2012 00:41:35 +0000 Subject: pkt_sched: fix virtual-start-time update in QFQ If the old timestamps of a class, say cl, are stale when the class becomes active, then QFQ may assign to cl a much higher start time than the maximum value allowed. This may happen when QFQ assigns to the start time of cl the finish time of a group whose classes are characterized by a higher value of the ratio max_class_pkt/weight_of_the_class with respect to that of cl. Inserting a class with a too high start time into the bucket list corrupts the data structure and may eventually lead to crashes. This patch limits the maximum start time assigned to a class. Signed-off-by: Paolo Valente Signed-off-by: David S. Miller --- net/sched/sch_qfq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c index e4723d31fdd5..211a21217045 100644 --- a/net/sched/sch_qfq.c +++ b/net/sched/sch_qfq.c @@ -865,7 +865,10 @@ static void qfq_update_start(struct qfq_sched *q, struct qfq_class *cl) if (mask) { struct qfq_group *next = qfq_ffs(q, mask); if (qfq_gt(roundedF, next->F)) { - cl->S = next->F; + if (qfq_gt(limit, next->F)) + cl->S = next->F; + else /* preserve timestamp correctness */ + cl->S = limit; return; } } -- cgit v1.2.3 From 20332ff376995daa08dcee2a193555800f17514b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 19 Sep 2012 12:43:21 +0100 Subject: ARM: 7537/1: clk: Fix release in devm_clk_put() Surprisingly devres_destroy() doesn't call the destructor for the resource it is destroying, use the newly added devres_release() instead to fix this. Signed-off-by: Mark Brown Signed-off-by: Russell King --- drivers/clk/clk-devres.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/clk-devres.c b/drivers/clk/clk-devres.c index f1e7a83426cc..8f571548870f 100644 --- a/drivers/clk/clk-devres.c +++ b/drivers/clk/clk-devres.c @@ -48,7 +48,7 @@ void devm_clk_put(struct device *dev, struct clk *clk) { int ret; - ret = devres_destroy(dev, devm_clk_release, devm_clk_match, clk); + ret = devres_release(dev, devm_clk_release, devm_clk_match, clk); WARN_ON(ret); } -- cgit v1.2.3 From 2b25d9f64b542cd19e020ce9d4d628c1feba96e5 Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Thu, 13 Sep 2012 22:04:18 +0100 Subject: ARM: 7535/1: Reprogram smp_twd based on new common clk framework notifiers Running cpufreq driver on imx6q, the following warning is seen. $ BUG: sleeping function called from invalid context at kernel/mutex.c:269 stack backtrace: Backtrace: [<80011d64>] (dump_backtrace+0x0/0x10c) from [<803fc164>] (dump_stack+0x18/0x1c) r6:bf8142e0 r5:bf814000 r4:806ac794 r3:bf814000 [<803fc14c>] (dump_stack+0x0/0x1c) from [<803fd444>] (print_usage_bug+0x250/0x2b 8) [<803fd1f4>] (print_usage_bug+0x0/0x2b8) from [<80060f90>] (mark_lock+0x56c/0x67 0) [<80060a24>] (mark_lock+0x0/0x670) from [<80061a20>] (__lock_acquire+0x98c/0x19b 4) [<80061094>] (__lock_acquire+0x0/0x19b4) from [<80062f14>] (lock_acquire+0x68/0x 7c) [<80062eac>] (lock_acquire+0x0/0x7c) from [<80400f28>] (mutex_lock_nested+0x78/0 x344) r7:00000000 r6:bf872000 r5:805cc858 r4:805c2a04 [<80400eb0>] (mutex_lock_nested+0x0/0x344) from [<803089ac>] (clk_get_rate+0x1c/ 0x58) [<80308990>] (clk_get_rate+0x0/0x58) from [<80013c48>] (twd_update_frequency+0x1 8/0x50) r5:bf253d04 r4:805cadf4 [<80013c30>] (twd_update_frequency+0x0/0x50) from [<80068e20>] (generic_smp_call _function_single_interrupt+0xd4/0x13c) r4:bf873ee0 r3:80013c30 [<80068d4c>] (generic_smp_call_function_single_interrupt+0x0/0x13c) from [<80013 34c>] (handle_IPI+0xc0/0x194) r8:00000001 r7:00000000 r6:80574e48 r5:bf872000 r4:80593958 [<8001328c>] (handle_IPI+0x0/0x194) from [<800084e8>] (gic_handle_irq+0x58/0x60) r8:00000000 r7:bf873f8c r6:bf873f58 r5:80593070 r4:f4000100 r3:00000005 [<80008490>] (gic_handle_irq+0x0/0x60) from [<8000e124>] (__irq_svc+0x44/0x60) Exception stack(0xbf873f58 to 0xbf873fa0) 3f40: 00000001 00000001 3f60: 00000000 bf814000 bf872000 805cab48 80405aa4 80597648 00000000 412fc09a 3f80: bf872000 bf873fac bf873f70 bf873fa0 80063844 8000f1f8 20000013 ffffffff r6:ffffffff r5:20000013 r4:8000f1f8 r3:bf814000 [<8000f1b8>] (default_idle+0x0/0x4c) from [<8000f428>] (cpu_idle+0x98/0x114) [<8000f390>] (cpu_idle+0x0/0x114) from [<803f9834>] (secondary_start_kernel+0x11 c/0x140) [<803f9718>] (secondary_start_kernel+0x0/0x140) from [<103f9234>] (0x103f9234) r6:10c03c7d r5:0000001f r4:4f86806a r3:803f921c It looks that the warning is caused by that twd_update_frequency() gets called from an atomic context while it calls clk_get_rate() where a mutex gets held. To fix the warning, let's convert common clk users over to clk notifiers in place of CPUfreq notifiers. This works out nicely for Cortex-A9 MPcore designs that scale all CPUs at the same frequency. Platforms that have not been converted to the common clk framework and support CPUfreq will rely on the old mechanism. Once these platforms are converted over fully then we can remove the CPUfreq-specific bits for good. Signed-off-by: Mike Turquette Signed-off-by: Shawn Guo Reviewed-by: Linus Walleij Reviewed-by: Ulf Hansson Signed-off-by: Russell King --- arch/arm/kernel/smp_twd.c | 48 +++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index fef42b21cecb..e1f906989bb8 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -96,7 +95,52 @@ static void twd_timer_stop(struct clock_event_device *clk) disable_percpu_irq(clk->irq); } -#ifdef CONFIG_CPU_FREQ +#ifdef CONFIG_COMMON_CLK + +/* + * Updates clockevent frequency when the cpu frequency changes. + * Called on the cpu that is changing frequency with interrupts disabled. + */ +static void twd_update_frequency(void *new_rate) +{ + twd_timer_rate = *((unsigned long *) new_rate); + + clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate); +} + +static int twd_rate_change(struct notifier_block *nb, + unsigned long flags, void *data) +{ + struct clk_notifier_data *cnd = data; + + /* + * The twd clock events must be reprogrammed to account for the new + * frequency. The timer is local to a cpu, so cross-call to the + * changing cpu. + */ + if (flags == POST_RATE_CHANGE) + smp_call_function(twd_update_frequency, + (void *)&cnd->new_rate, 1); + + return NOTIFY_OK; +} + +static struct notifier_block twd_clk_nb = { + .notifier_call = twd_rate_change, +}; + +static int twd_clk_init(void) +{ + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) + return clk_notifier_register(twd_clk, &twd_clk_nb); + + return 0; +} +core_initcall(twd_clk_init); + +#elif defined (CONFIG_CPU_FREQ) + +#include /* * Updates clockevent frequency when the cpu frequency changes. -- cgit v1.2.3 From ed3770a9cd5764a575b83810ea679bbff2b03082 Mon Sep 17 00:00:00 2001 From: Søren holm Date: Mon, 17 Sep 2012 21:50:57 +0000 Subject: asix: Support DLink DUB-E100 H/W Ver C1 Signed-off-by: Søren Holm Cc: stable@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/usb/asix_devices.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 4fd48df6b989..32e31c5c5dc6 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -961,6 +961,10 @@ static const struct usb_device_id products [] = { // DLink DUB-E100 H/W Ver B1 Alternate USB_DEVICE (0x2001, 0x3c05), .driver_info = (unsigned long) &ax88772_info, +}, { + // DLink DUB-E100 H/W Ver C1 + USB_DEVICE (0x2001, 0x1a02), + .driver_info = (unsigned long) &ax88772_info, }, { // Linksys USB1000 USB_DEVICE (0x1737, 0x0039), -- cgit v1.2.3 From 8ea853fd0b721f14eacff1a5b364fe3e60d2dd82 Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Tue, 18 Sep 2012 16:53:21 +0000 Subject: net/core: fix comment in skb_try_coalesce It should be the skb which is not cloned Signed-off-by: Li RongQing Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/skbuff.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index fe00d1208167..e33ebae519c8 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3502,7 +3502,9 @@ bool skb_try_coalesce(struct sk_buff *to, struct sk_buff *from, if (!skb_cloned(from)) skb_shinfo(from)->nr_frags = 0; - /* if the skb is cloned this does nothing since we set nr_frags to 0 */ + /* if the skb is not cloned this does nothing + * since we set nr_frags to 0. + */ for (i = 0; i < skb_shinfo(from)->nr_frags; i++) skb_frag_ref(from, i); -- cgit v1.2.3 From 8669cf6793bb38307a30fb6b9565ddc8840ebd3f Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Wed, 19 Sep 2012 11:10:48 -0700 Subject: Input: i8042 - disable mux on Toshiba C850D On Toshiba Satellite C850D, the touchpad and the keyboard might randomly not work at boot. Preventing MUX mode activation solves this issue. Signed-off-by: Anisse Astier Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 6918773ce024..d6cc77a53c7e 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -333,6 +333,12 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "EQUIUM A110"), }, }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE C850D"), + }, + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"), -- cgit v1.2.3 From 59d1f5c41a21f0d87973f2dedd40efd927a201d6 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Wed, 19 Sep 2012 11:10:47 -0700 Subject: Input: ambakmi - [un]prepare clocks when enabling amd disabling Clocks must be prepared before enabling and unprepared after disabling. Use appropriate functions to do this in one go. Signed-off-by: Pawel Moll Signed-off-by: Dmitry Torokhov --- drivers/input/serio/ambakmi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index 2ffd110bd5bc..2e77246c2e5a 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -72,7 +72,7 @@ static int amba_kmi_open(struct serio *io) unsigned int divisor; int ret; - ret = clk_enable(kmi->clk); + ret = clk_prepare_enable(kmi->clk); if (ret) goto out; @@ -92,7 +92,7 @@ static int amba_kmi_open(struct serio *io) return 0; clk_disable: - clk_disable(kmi->clk); + clk_disable_unprepare(kmi->clk); out: return ret; } @@ -104,7 +104,7 @@ static void amba_kmi_close(struct serio *io) writeb(0, KMICR); free_irq(kmi->irq, kmi); - clk_disable(kmi->clk); + clk_disable_unprepare(kmi->clk); } static int __devinit amba_kmi_probe(struct amba_device *dev, -- cgit v1.2.3 From 30ebb7fa0e3e92145b859ad6e44aa6dc636b4103 Mon Sep 17 00:00:00 2001 From: Tai-hwa Liang Date: Wed, 19 Sep 2012 11:10:47 -0700 Subject: Input: sentelic - filter out erratic movement when lifting finger When lifing finger off the surface some versions of touchpad send movement packets with very low coordinates, which cause cursor to jump to the upper left corner of the screen. Let's ignore least significant bits of X and Y coordinates if higher bits are all zeroes and consider finger not touching the pad. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43197 Reported-and-tested-by: Aleksey Spiridonov Tested-by: Eddie Dunn Tested-by: Jakub Luzny Tested-by: Olivier Goffart Signed-off-by: Tai-hwa Liang Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/sentelic.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 3f5649f19082..a261d8576919 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -721,6 +721,17 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) switch (psmouse->packet[0] >> FSP_PKT_TYPE_SHIFT) { case FSP_PKT_TYPE_ABS: + + if ((packet[0] == 0x48 || packet[0] == 0x49) && + packet[1] == 0 && packet[2] == 0) { + /* + * Ignore coordinate noise when finger leaving the + * surface, otherwise cursor may jump to upper-left + * corner. + */ + packet[3] &= 0xf0; + } + abs_x = GET_ABS_X(packet); abs_y = GET_ABS_Y(packet); -- cgit v1.2.3 From 35b1da4e1e1026b5195649170dfb9ebb52f808e0 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 19 Sep 2012 15:56:23 -0700 Subject: Input: edt-ft5x06 - return -EFAULT on copy_to_user() error copy_to_user() returns the number of bytes remaining, but we want a negative error code here. Signed-off-by: Axel Lin Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/edt-ft5x06.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index b06a5e3a665e..64957770b522 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -566,9 +566,12 @@ static ssize_t edt_ft5x06_debugfs_raw_data_read(struct file *file, } read = min_t(size_t, count, tsdata->raw_bufsize - *off); - error = copy_to_user(buf, tsdata->raw_buffer + *off, read); - if (!error) - *off += read; + if (copy_to_user(buf, tsdata->raw_buffer + *off, read)) { + error = -EFAULT; + goto out; + } + + *off += read; out: mutex_unlock(&tsdata->mutex); return error ?: read; -- cgit v1.2.3 From 18d4dbd8866a34507d52495207ef5fcec6d41049 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 20 Sep 2012 21:00:15 +1000 Subject: Revert "drm/nv50-/gpio: initialise to vbios defaults during init" This reverts commit 991083ba60f89e717e3a4175be96d48a810e9eae. We discovered this causes problem on some Dell eDP laptops, so Apple lose out for now, I might try and whip up a dmi based workaround for 3.6 but I'm not sure I'll get time. Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nv50_gpio.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv50_gpio.c b/drivers/gpu/drm/nouveau/nv50_gpio.c index f03490534893..f429e6a8ca7a 100644 --- a/drivers/gpu/drm/nouveau/nv50_gpio.c +++ b/drivers/gpu/drm/nouveau/nv50_gpio.c @@ -115,9 +115,6 @@ nv50_gpio_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; - /* initialise gpios and routing to vbios defaults */ - nouveau_gpio_reset(dev); - /* disable, and ack any pending gpio interrupts */ nv_wr32(dev, 0xe050, 0x00000000); nv_wr32(dev, 0xe054, 0xffffffff); -- cgit v1.2.3 From 16c58081eb95e35f284421176f355eccfc773bbe Mon Sep 17 00:00:00 2001 From: Simon Kitching Date: Thu, 20 Sep 2012 12:59:16 -0400 Subject: drm/radeon: Prevent leak of scratch register on resume from suspend Cards typically have 5-7 scratch registers; one of these is reserved for rdev->rptr_save_reg. Unfortunately the reservation is done in function r100_cp_init, which is called by all drivers except r600 - and this function is also invoked on resume from suspend. After several resumes, no scratch registers are free and graphics acceleration is disabled. Dmesg then reports either: *ERROR* radeon: cp failed to get scratch reg (-22). *ERROR* radeon: cp isn't working(-22). radeon 0000:01:00.0: failed initializing CP (-22). or: *ERROR* radeon: failed to get scratch reg (-22). *ERROR* radeon: failed testing IB on GFX ring (-22). *ERROR* ib ring test failed (-22). The chain of calls on boot for all except r600 is: radeon_init -> ... -> (rXXX_init) -> rXXX_startup -> r100_cp_init The chain of calls on resume for all except r600 is: rXXX_resume -> rXXX_startup -> r100_cp_init. R600 correctly allocates rptr_save_reg in r600_init (ie once only, not in resume). However moving the code into the init functions for all drivers means touching 4 drivers. So instead, this patch just adds a test in r100_cp_init to avoid reallocating on resume. As the rdev structure is allocated via kzalloc in radeon_driver_load_kms, and zero is not a valid registerid, zero safely implies not-yet-allocated. This issue appears to have been introduced in c7eff978 (3.6.0-rcN) Signed-off-by: Simon Kitching Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r100.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 8acb34fd3fd5..8d7e33a0b243 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1182,7 +1182,8 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) ring->ready = true; radeon_ttm_set_active_vram_size(rdev, rdev->mc.real_vram_size); - if (radeon_ring_supports_scratch_reg(rdev, ring)) { + if (!ring->rptr_save_reg /* not resuming from suspend */ + && radeon_ring_supports_scratch_reg(rdev, ring)) { r = radeon_scratch_get(rdev, &ring->rptr_save_reg); if (r) { DRM_ERROR("failed to get scratch reg for rptr save (%d).\n", r); -- cgit v1.2.3 From 85f2a2ef1d0ab99523e0b947a2b723f5650ed6aa Mon Sep 17 00:00:00 2001 From: Wen Congyang Date: Thu, 20 Sep 2012 14:04:47 +0800 Subject: tracing: Don't call page_to_pfn() if page is NULL When allocating memory fails, page is NULL. page_to_pfn() will cause the kernel panicked if we don't use sparsemem vmemmap. Link: http://lkml.kernel.org/r/505AB1FF.8020104@cn.fujitsu.com Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Andrew Morton Cc: stable Acked-by: Mel Gorman Reviewed-by: Minchan Kim Signed-off-by: Wen Congyang Signed-off-by: Steven Rostedt --- include/trace/events/kmem.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h index 5f889f16b0c8..08fa27244da7 100644 --- a/include/trace/events/kmem.h +++ b/include/trace/events/kmem.h @@ -214,7 +214,7 @@ TRACE_EVENT(mm_page_alloc, TP_printk("page=%p pfn=%lu order=%d migratetype=%d gfp_flags=%s", __entry->page, - page_to_pfn(__entry->page), + __entry->page ? page_to_pfn(__entry->page) : 0, __entry->order, __entry->migratetype, show_gfp_flags(__entry->gfp_flags)) @@ -240,7 +240,7 @@ DECLARE_EVENT_CLASS(mm_page, TP_printk("page=%p pfn=%lu order=%u migratetype=%d percpu_refill=%d", __entry->page, - page_to_pfn(__entry->page), + __entry->page ? page_to_pfn(__entry->page) : 0, __entry->order, __entry->migratetype, __entry->order == 0) -- cgit v1.2.3 From bc26ccd8fc756749de95606d28314efd0ce5aec3 Mon Sep 17 00:00:00 2001 From: Andrey Vagin Date: Wed, 19 Sep 2012 09:40:00 +0000 Subject: tcp: restore rcv_wscale in a repair mode (v2) rcv_wscale is a symetric parameter with snd_wscale. Both this parameters are set on a connection handshake. Without this value a remote window size can not be interpreted correctly, because a value from a packet should be shifted on rcv_wscale. And one more thing is that wscale_ok should be set too. This patch doesn't break a backward compatibility. If someone uses it in a old scheme, a rcv window will be restored with the same bug (rcv_wscale = 0). v2: Save backward compatibility on big-endian system. Before the first two bytes were snd_wscale and the second two bytes were rcv_wscale. Now snd_wscale is opt_val & 0xFFFF and rcv_wscale >> 16. This approach is independent on byte ordering. Cc: David S. Miller Cc: Alexey Kuznetsov Cc: James Morris Cc: Hideaki YOSHIFUJI Cc: Patrick McHardy CC: Pavel Emelyanov Signed-off-by: Andrew Vagin Acked-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index bf9a8ab29459..5f6419341821 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2331,10 +2331,17 @@ static int tcp_repair_options_est(struct tcp_sock *tp, tp->rx_opt.mss_clamp = opt.opt_val; break; case TCPOPT_WINDOW: - if (opt.opt_val > 14) - return -EFBIG; + { + u16 snd_wscale = opt.opt_val & 0xFFFF; + u16 rcv_wscale = opt.opt_val >> 16; + + if (snd_wscale > 14 || rcv_wscale > 14) + return -EFBIG; - tp->rx_opt.snd_wscale = opt.opt_val; + tp->rx_opt.snd_wscale = snd_wscale; + tp->rx_opt.rcv_wscale = rcv_wscale; + tp->rx_opt.wscale_ok = 1; + } break; case TCPOPT_SACK_PERM: if (opt.opt_val != 0) -- cgit v1.2.3 From 9db273f45686218e055a3738f3311048cbb54fee Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Wed, 19 Sep 2012 10:03:36 +0000 Subject: net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200 One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) Cc: Thomas Schäfer Cc: Dan Williams Cc: Shawn J. Goff Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index b1ba68f1a049..3543c9e57824 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -366,16 +366,20 @@ static const struct usb_device_id products[] = { }, /* 2. Combined interface devices matching on class+protocol */ + { /* Huawei E367 and possibly others in "Windows mode" */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 7), + .driver_info = (unsigned long)&qmi_wwan_info, + }, { /* Huawei E392, E398 and possibly others in "Windows mode" */ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17), .driver_info = (unsigned long)&qmi_wwan_shared, }, - { /* Pantech UML290 */ - USB_DEVICE_AND_INTERFACE_INFO(0x106c, 0x3718, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), + { /* Pantech UML290, P4200 and more */ + USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), .driver_info = (unsigned long)&qmi_wwan_shared, }, { /* Pantech UML290 - newer firmware */ - USB_DEVICE_AND_INTERFACE_INFO(0x106c, 0x3718, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), + USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), .driver_info = (unsigned long)&qmi_wwan_shared, }, @@ -383,6 +387,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */ {QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */ {QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0157, 5)}, /* ZTE MF683 */ {QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */ {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ -- cgit v1.2.3 From 4c87308bdea31a7b4828a51f6156e6f721a1fcc9 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 19 Sep 2012 11:33:38 +0000 Subject: xfrm_user: fix info leak in copy_to_user_auth() copy_to_user_auth() fails to initialize the remainder of alg_name and therefore discloses up to 54 bytes of heap memory via netlink to userland. Use strncpy() instead of strcpy() to fill the trailing bytes of alg_name with null bytes. Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller --- net/xfrm/xfrm_user.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index d12b62547ad0..40dd50d6c4cc 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -742,7 +742,7 @@ static int copy_to_user_auth(struct xfrm_algo_auth *auth, struct sk_buff *skb) return -EMSGSIZE; algo = nla_data(nla); - strcpy(algo->alg_name, auth->alg_name); + strncpy(algo->alg_name, auth->alg_name, sizeof(algo->alg_name)); memcpy(algo->alg_key, auth->alg_key, (auth->alg_key_len + 7) / 8); algo->alg_key_len = auth->alg_key_len; -- cgit v1.2.3 From f778a636713a435d3a922c60b1622a91136560c1 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 19 Sep 2012 11:33:39 +0000 Subject: xfrm_user: fix info leak in copy_to_user_state() The memory reserved to dump the xfrm state includes the padding bytes of struct xfrm_usersa_info added by the compiler for alignment (7 for amd64, 3 for i386). Add an explicit memset(0) before filling the buffer to avoid the info leak. Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller --- net/xfrm/xfrm_user.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 40dd50d6c4cc..d585459dc8bb 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -689,6 +689,7 @@ out: static void copy_to_user_state(struct xfrm_state *x, struct xfrm_usersa_info *p) { + memset(p, 0, sizeof(*p)); memcpy(&p->id, &x->id, sizeof(p->id)); memcpy(&p->sel, &x->sel, sizeof(p->sel)); memcpy(&p->lft, &x->lft, sizeof(p->lft)); -- cgit v1.2.3 From 7b789836f434c87168eab067cfbed1ec4783dffd Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 19 Sep 2012 11:33:40 +0000 Subject: xfrm_user: fix info leak in copy_to_user_policy() The memory reserved to dump the xfrm policy includes multiple padding bytes added by the compiler for alignment (padding bytes in struct xfrm_selector and struct xfrm_userpolicy_info). Add an explicit memset(0) before filling the buffer to avoid the heap info leak. Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller --- net/xfrm/xfrm_user.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index d585459dc8bb..84dd85ceeeea 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1320,6 +1320,7 @@ static void copy_from_user_policy(struct xfrm_policy *xp, struct xfrm_userpolicy static void copy_to_user_policy(struct xfrm_policy *xp, struct xfrm_userpolicy_info *p, int dir) { + memset(p, 0, sizeof(*p)); memcpy(&p->sel, &xp->selector, sizeof(p->sel)); memcpy(&p->lft, &xp->lft, sizeof(p->lft)); memcpy(&p->curlft, &xp->curlft, sizeof(p->curlft)); -- cgit v1.2.3 From 1f86840f897717f86d523a13e99a447e6a5d2fa5 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 19 Sep 2012 11:33:41 +0000 Subject: xfrm_user: fix info leak in copy_to_user_tmpl() The memory used for the template copy is a local stack variable. As struct xfrm_user_tmpl contains multiple holes added by the compiler for alignment, not initializing the memory will lead to leaking stack bytes to userland. Add an explicit memset(0) to avoid the info leak. Initial version of the patch by Brad Spengler. Cc: Brad Spengler Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller --- net/xfrm/xfrm_user.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 84dd85ceeeea..8024b3dea8c2 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1425,6 +1425,7 @@ static int copy_to_user_tmpl(struct xfrm_policy *xp, struct sk_buff *skb) struct xfrm_user_tmpl *up = &vec[i]; struct xfrm_tmpl *kp = &xp->xfrm_vec[i]; + memset(up, 0, sizeof(*up)); memcpy(&up->id, &kp->id, sizeof(up->id)); up->family = kp->encap_family; memcpy(&up->saddr, &kp->saddr, sizeof(up->saddr)); -- cgit v1.2.3 From ecd7918745234e423dd87fcc0c077da557909720 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Thu, 20 Sep 2012 10:01:49 +0000 Subject: xfrm_user: ensure user supplied esn replay window is valid The current code fails to ensure that the netlink message actually contains as many bytes as the header indicates. If a user creates a new state or updates an existing one but does not supply the bytes for the whole ESN replay window, the kernel copies random heap bytes into the replay bitmap, the ones happen to follow the XFRMA_REPLAY_ESN_VAL netlink attribute. This leads to following issues: 1. The replay window has random bits set confusing the replay handling code later on. 2. A malicious user could use this flaw to leak up to ~3.5kB of heap memory when she has access to the XFRM netlink interface (requires CAP_NET_ADMIN). Known users of the ESN replay window are strongSwan and Steffen's iproute2 patch (). The latter uses the interface with a bitmap supplied while the former does not. strongSwan is therefore prone to run into issue 1. To fix both issues without breaking existing userland allow using the XFRMA_REPLAY_ESN_VAL netlink attribute with either an empty bitmap or a fully specified one. For the former case we initialize the in-kernel bitmap with zero, for the latter we copy the user supplied bitmap. For state updates the full bitmap must be supplied. To prevent overflows in the bitmap length calculation the maximum size of bmp_len is limited to 128 by this patch -- resulting in a maximum replay window of 4096 packets. This should be sufficient for all real life scenarios (RFC 4303 recommends a default replay window size of 64). Cc: Steffen Klassert Cc: Martin Willi Cc: Ben Hutchings Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- include/linux/xfrm.h | 2 ++ net/xfrm/xfrm_user.c | 31 +++++++++++++++++++++++++------ 2 files changed, 27 insertions(+), 6 deletions(-) diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h index 22e61fdf75a2..28e493b5b94c 100644 --- a/include/linux/xfrm.h +++ b/include/linux/xfrm.h @@ -84,6 +84,8 @@ struct xfrm_replay_state { __u32 bitmap; }; +#define XFRMA_REPLAY_ESN_MAX 4096 + struct xfrm_replay_state_esn { unsigned int bmp_len; __u32 oseq; diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 8024b3dea8c2..5927065e97cf 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -123,9 +123,21 @@ static inline int verify_replay(struct xfrm_usersa_info *p, struct nlattr **attrs) { struct nlattr *rt = attrs[XFRMA_REPLAY_ESN_VAL]; + struct xfrm_replay_state_esn *rs; - if ((p->flags & XFRM_STATE_ESN) && !rt) - return -EINVAL; + if (p->flags & XFRM_STATE_ESN) { + if (!rt) + return -EINVAL; + + rs = nla_data(rt); + + if (rs->bmp_len > XFRMA_REPLAY_ESN_MAX / sizeof(rs->bmp[0]) / 8) + return -EINVAL; + + if (nla_len(rt) < xfrm_replay_state_esn_len(rs) && + nla_len(rt) != sizeof(*rs)) + return -EINVAL; + } if (!rt) return 0; @@ -370,14 +382,15 @@ static inline int xfrm_replay_verify_len(struct xfrm_replay_state_esn *replay_es struct nlattr *rp) { struct xfrm_replay_state_esn *up; + int ulen; if (!replay_esn || !rp) return 0; up = nla_data(rp); + ulen = xfrm_replay_state_esn_len(up); - if (xfrm_replay_state_esn_len(replay_esn) != - xfrm_replay_state_esn_len(up)) + if (nla_len(rp) < ulen || xfrm_replay_state_esn_len(replay_esn) != ulen) return -EINVAL; return 0; @@ -388,22 +401,28 @@ static int xfrm_alloc_replay_state_esn(struct xfrm_replay_state_esn **replay_esn struct nlattr *rta) { struct xfrm_replay_state_esn *p, *pp, *up; + int klen, ulen; if (!rta) return 0; up = nla_data(rta); + klen = xfrm_replay_state_esn_len(up); + ulen = nla_len(rta) >= klen ? klen : sizeof(*up); - p = kmemdup(up, xfrm_replay_state_esn_len(up), GFP_KERNEL); + p = kzalloc(klen, GFP_KERNEL); if (!p) return -ENOMEM; - pp = kmemdup(up, xfrm_replay_state_esn_len(up), GFP_KERNEL); + pp = kzalloc(klen, GFP_KERNEL); if (!pp) { kfree(p); return -ENOMEM; } + memcpy(p, up, ulen); + memcpy(pp, up, ulen); + *replay_esn = p; *preplay_esn = pp; -- cgit v1.2.3 From e3ac104d41a97b42316915020ba228c505447d21 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 19 Sep 2012 11:33:43 +0000 Subject: xfrm_user: don't copy esn replay window twice for new states The ESN replay window was already fully initialized in xfrm_alloc_replay_state_esn(). No need to copy it again. Cc: Steffen Klassert Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller --- net/xfrm/xfrm_user.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 5927065e97cf..289f4bf18ff0 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -461,10 +461,11 @@ static void copy_from_user_state(struct xfrm_state *x, struct xfrm_usersa_info * * somehow made shareable and move it to xfrm_state.c - JHS * */ -static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs) +static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs, + int update_esn) { struct nlattr *rp = attrs[XFRMA_REPLAY_VAL]; - struct nlattr *re = attrs[XFRMA_REPLAY_ESN_VAL]; + struct nlattr *re = update_esn ? attrs[XFRMA_REPLAY_ESN_VAL] : NULL; struct nlattr *lt = attrs[XFRMA_LTIME_VAL]; struct nlattr *et = attrs[XFRMA_ETIMER_THRESH]; struct nlattr *rt = attrs[XFRMA_REPLAY_THRESH]; @@ -574,7 +575,7 @@ static struct xfrm_state *xfrm_state_construct(struct net *net, goto error; /* override default values from above */ - xfrm_update_ae_params(x, attrs); + xfrm_update_ae_params(x, attrs, 0); return x; @@ -1848,7 +1849,7 @@ static int xfrm_new_ae(struct sk_buff *skb, struct nlmsghdr *nlh, goto out; spin_lock_bh(&x->lock); - xfrm_update_ae_params(x, attrs); + xfrm_update_ae_params(x, attrs, 1); spin_unlock_bh(&x->lock); c.event = nlh->nlmsg_type; -- cgit v1.2.3 From 3cfc1590107a155218c97df0db3eb0a2bd7fda16 Mon Sep 17 00:00:00 2001 From: Devendra Naga Date: Wed, 19 Sep 2012 21:04:36 +0000 Subject: at91ether: return PTR_ERR if call to clk_get fails we are currently returning ENODEV, as the clk_get may give a exact error code in its returned pointer, assign it to the ret by using the PTR_ERR function, so that the subsequent goto label will jump to the error path and clean the driver and return the error correctly. Signed-off-by: Devendra Naga Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/at91_ether.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c index 77884191a8c6..4e980a7886fb 100644 --- a/drivers/net/ethernet/cadence/at91_ether.c +++ b/drivers/net/ethernet/cadence/at91_ether.c @@ -1086,7 +1086,7 @@ static int __init at91ether_probe(struct platform_device *pdev) /* Clock */ lp->ether_clk = clk_get(&pdev->dev, "ether_clk"); if (IS_ERR(lp->ether_clk)) { - res = -ENODEV; + res = PTR_ERR(lp->ether_clk); goto err_ioumap; } clk_enable(lp->ether_clk); -- cgit v1.2.3 From 8babe8cc6570ed896b7b596337eb8fe730c3ff45 Mon Sep 17 00:00:00 2001 From: Ed Cashin Date: Wed, 19 Sep 2012 15:46:39 +0000 Subject: aoe: assert AoE packets marked as requiring no checksum In order for the network layer to see that AoE requires no checksumming in a generic way, the packets must be marked as requiring no checksum, so we make this requirement explicit with the assertion. Signed-off-by: Ed Cashin Signed-off-by: David S. Miller --- drivers/block/aoe/aoecmd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index de0435e63b02..887f68f6d79a 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -35,6 +35,7 @@ new_skb(ulong len) skb_reset_mac_header(skb); skb_reset_network_header(skb); skb->protocol = __constant_htons(ETH_P_AOE); + skb_checksum_none_assert(skb); } return skb; } -- cgit v1.2.3 From c0d680e577ff171e7b37dbdb1b1bf5451e851f04 Mon Sep 17 00:00:00 2001 From: Ed Cashin Date: Wed, 19 Sep 2012 15:49:00 +0000 Subject: net: do not disable sg for packets requiring no checksum A change in a series of VLAN-related changes appears to have inadvertently disabled the use of the scatter gather feature of network cards for transmission of non-IP ethernet protocols like ATA over Ethernet (AoE). Below is a reference to the commit that introduces a "harmonize_features" function that turns off scatter gather when the NIC does not support hardware checksumming for the ethernet protocol of an sk buff. commit f01a5236bd4b140198fbcc550f085e8361fd73fa Author: Jesse Gross Date: Sun Jan 9 06:23:31 2011 +0000 net offloading: Generalize netif_get_vlan_features(). The can_checksum_protocol function is not equipped to consider a protocol that does not require checksumming. Calling it for a protocol that requires no checksum is inappropriate. The patch below has harmonize_features call can_checksum_protocol when the protocol needs a checksum, so that the network layer is not forced to perform unnecessary skb linearization on the transmission of AoE packets. Unnecessary linearization results in decreased performance and increased memory pressure, as reported here: http://www.spinics.net/lists/linux-mm/msg15184.html The problem has probably not been widely experienced yet, because only recently has the kernel.org-distributed aoe driver acquired the ability to use payloads of over a page in size, with the patchset recently included in the mm tree: https://lkml.org/lkml/2012/8/28/140 The coraid.com-distributed aoe driver already could use payloads of greater than a page in size, but its users generally do not use the newest kernels. Signed-off-by: Ed Cashin Signed-off-by: David S. Miller --- net/core/dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index ac7609d85187..89e33a5d4d93 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2134,7 +2134,8 @@ static bool can_checksum_protocol(netdev_features_t features, __be16 protocol) static netdev_features_t harmonize_features(struct sk_buff *skb, __be16 protocol, netdev_features_t features) { - if (!can_checksum_protocol(features, protocol)) { + if (skb->ip_summed != CHECKSUM_NONE && + !can_checksum_protocol(features, protocol)) { features &= ~NETIF_F_ALL_CSUM; features &= ~NETIF_F_SG; } else if (illegal_highdma(skb->dev, skb)) { -- cgit v1.2.3 From 6c06d608ec244d9b030f16ce9088b4456197e1cb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 21 Sep 2012 09:19:50 -0400 Subject: drm/nouveau: add dmi quirk for gpio reset This fixes the gpio reset problem so the Retina MBP works, but avoids breaking the Dell systems. Ben will work on a better solution for 3.7. Tested by me on retina MBP. Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nv50_gpio.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nv50_gpio.c b/drivers/gpu/drm/nouveau/nv50_gpio.c index f429e6a8ca7a..c399d510b27a 100644 --- a/drivers/gpu/drm/nouveau/nv50_gpio.c +++ b/drivers/gpu/drm/nouveau/nv50_gpio.c @@ -22,6 +22,7 @@ * Authors: Ben Skeggs */ +#include #include "drmP.h" #include "nouveau_drv.h" #include "nouveau_hw.h" @@ -110,11 +111,26 @@ nv50_gpio_isr(struct drm_device *dev) nv_wr32(dev, 0xe074, intr1); } +static struct dmi_system_id gpio_reset_ids[] = { + { + .ident = "Apple Macbook 10,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro10,1"), + } + }, + { } +}; + int nv50_gpio_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; + /* initialise gpios and routing to vbios defaults */ + if (dmi_check_system(gpio_reset_ids)) + nouveau_gpio_reset(dev); + /* disable, and ack any pending gpio interrupts */ nv_wr32(dev, 0xe050, 0x00000000); nv_wr32(dev, 0xe054, 0xffffffff); -- cgit v1.2.3 From e21093ef6fb4cbecdf926102286dbe280ae965db Mon Sep 17 00:00:00 2001 From: Ira W. Snyder Date: Tue, 11 Sep 2012 15:58:15 -0700 Subject: can: janz-ican3: fix support for older hardware revisions The Revision 1.0 Janz CMOD-IO Carrier Board does not have support for the reset registers. To support older hardware, the code is changed to use the hardware reset register on the Janz VMOD-ICAN3 hardware itself. Cc: stable Signed-off-by: Ira W. Snyder Signed-off-by: Marc Kleine-Budde --- drivers/net/can/janz-ican3.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c index 98ee43819911..7edadee487ba 100644 --- a/drivers/net/can/janz-ican3.c +++ b/drivers/net/can/janz-ican3.c @@ -1391,7 +1391,6 @@ static irqreturn_t ican3_irq(int irq, void *dev_id) */ static int ican3_reset_module(struct ican3_dev *mod) { - u8 val = 1 << mod->num; unsigned long start; u8 runold, runnew; @@ -1405,8 +1404,7 @@ static int ican3_reset_module(struct ican3_dev *mod) runold = ioread8(mod->dpm + TARGET_RUNNING); /* reset the module */ - iowrite8(val, &mod->ctrl->reset_assert); - iowrite8(val, &mod->ctrl->reset_deassert); + iowrite8(0x00, &mod->dpmctrl->hwreset); /* wait until the module has finished resetting and is running */ start = jiffies; -- cgit v1.2.3 From ab04c8bd423edb03e2148350a091836c196107fc Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 19 Sep 2012 14:58:45 +0200 Subject: can: ti_hecc: fix oops during rmmod This patch fixes an oops which occurs when unloading the driver, while the network interface is still up. The problem is that first the io mapping is teared own, then the CAN device is unregistered, resulting in accessing the hardware's iomem: [ 172.744232] Unable to handle kernel paging request at virtual address c88b0040 [ 172.752441] pgd = c7be4000 [ 172.755645] [c88b0040] *pgd=87821811, *pte=00000000, *ppte=00000000 [ 172.762207] Internal error: Oops: 807 [#1] PREEMPT ARM [ 172.767517] Modules linked in: ti_hecc(-) can_dev [ 172.772430] CPU: 0 Not tainted (3.5.0alpha-00037-g3554cc0 #126) [ 172.778961] PC is at ti_hecc_close+0xb0/0x100 [ti_hecc] [ 172.784423] LR is at __dev_close_many+0x90/0xc0 [ 172.789123] pc : [] lr : [] psr: 60000013 [ 172.789123] sp : c5c1de68 ip : 00040081 fp : 00000000 [ 172.801025] r10: 00000001 r9 : c5c1c000 r8 : 00100100 [ 172.806457] r7 : c5d0a48c r6 : c5d0a400 r5 : 00000000 r4 : c5d0a000 [ 172.813232] r3 : c88b0000 r2 : 00000001 r1 : c5d0a000 r0 : c5d0a000 [ 172.820037] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 172.827423] Control: 10c5387d Table: 87be4019 DAC: 00000015 [ 172.833404] Process rmmod (pid: 600, stack limit = 0xc5c1c2f0) [ 172.839447] Stack: (0xc5c1de68 to 0xc5c1e000) [ 172.843994] de60: bf00c6b8 c5c1dec8 c5d0a000 c5d0a000 00200200 c033be58 [ 172.852478] de80: c5c1de44 c5c1dec8 c5c1dec8 c033bf2c c5c1de90 c5c1de90 c5d0a084 c5c1de44 [ 172.860992] dea0: c5c1dec8 c033c098 c061d3dc c5d0a000 00000000 c05edf28 c05edb34 c000d724 [ 172.869476] dec0: 00000000 c033c2f8 c5d0a084 c5d0a084 00000000 c033c370 00000000 c5d0a000 [ 172.877990] dee0: c05edb00 c033c3b8 c5d0a000 bf00d3ac c05edb00 bf00d7c8 bf00d7c8 c02842dc [ 172.886474] df00: c02842c8 c0282f90 c5c1c000 c05edb00 bf00d7c8 c0283668 bf00d7c8 00000000 [ 172.894989] df20: c0611f98 befe2f80 c000d724 c0282d10 bf00d804 00000000 00000013 c0068a8c [ 172.903472] df40: c5c538e8 685f6974 00636365 c61571a8 c5cb9980 c61571a8 c6158a20 c00c9bc4 [ 172.911987] df60: 00000000 00000000 c5cb9980 00000000 c5cb9980 00000000 c7823680 00000006 [ 172.920471] df80: bf00d804 00000880 c5c1df8c 00000000 000d4267 befe2f80 00000001 b6d90068 [ 172.928985] dfa0: 00000081 c000d5a0 befe2f80 00000001 befe2f80 00000880 b6d90008 00000008 [ 172.937469] dfc0: befe2f80 00000001 b6d90068 00000081 00000001 00000000 befe2eac 00000000 [ 172.945983] dfe0: 00000000 befe2b18 00023ba4 b6e6addc 60000010 befe2f80 a8e00190 86d2d344 [ 172.954498] [] (ti_hecc_close+0xb0/0x100 [ti_hecc]) from [] (__dev__registered_many+0xc0/0x2a0) [ 172.984161] [] (rollback_registered_many+0xc0/0x2a0) from [] (rollback_registered+0x20/0x30) [ 172.994750] [] (rollback_registered+0x20/0x30) from [] (unregister_netdevice_queue+0x68/0x98) [ 173.005401] [] (unregister_netdevice_queue+0x68/0x98) from [] (unregister_netdev+0x18/0x20) [ 173.015899] [] (unregister_netdev+0x18/0x20) from [] (ti_hecc_remove+0x60/0x80 [ti_hecc]) [ 173.026245] [] (ti_hecc_remove+0x60/0x80 [ti_hecc]) from [] (platform_drv_remove+0x14/0x18) [ 173.036712] [] (platform_drv_remove+0x14/0x18) from [] (__device_release_driver+0x7c/0xbc) Cc: stable Cc: Anant Gole Tested-by: Jan Luebbe Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ti_hecc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index 527dbcf95335..9ded21e79db5 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -984,12 +984,12 @@ static int __devexit ti_hecc_remove(struct platform_device *pdev) struct net_device *ndev = platform_get_drvdata(pdev); struct ti_hecc_priv *priv = netdev_priv(ndev); + unregister_candev(ndev); clk_disable(priv->clk); clk_put(priv->clk); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); iounmap(priv->base); release_mem_region(res->start, resource_size(res)); - unregister_candev(ndev); free_candev(ndev); platform_set_drvdata(pdev, NULL); -- cgit v1.2.3 From c1c1a59e37dab22951e25753de0bdf6b9272a4ea Mon Sep 17 00:00:00 2001 From: Mark Asselstine Date: Wed, 19 Sep 2012 16:30:44 -0400 Subject: firmware: fix directory creation rule matching with make 3.80 Since make 3.80 doesn't support secondary expansion it uses a fallback rule to create firmware directories which is matched after primary expansion of the $(installed-fw) rule's prerequisite. Commit 6c7080a61fc7 [firmware: fix directory creation rule matching with make 3.82] changed the expression generated after primary expansion such that the fallback was not matched. Updating the fallback rule to match the new look primary expansion is not an option for various reasons. The trailing slash added here to $(INSTALL_FW_PATH)/. while defining installed-fw-dirs fixes builds with make 3.82 since this will provide a matching rule for $(INSTALL_FW_PATH)/$$(dir %) when % is in the base firmware directory (ie. $(dir %) gives './'). Versions of make prior to 3.82 will strip this trailing slash along with the one generated by $(dir %) when % is in the base firmware directory and as such continue to function as before. Signed-off-by: Mark Asselstine Tested-by: Jan Beulich Signed-off-by: Michal Marek --- scripts/Makefile.fwinst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst index c3f69ae275d1..4d908d16c035 100644 --- a/scripts/Makefile.fwinst +++ b/scripts/Makefile.fwinst @@ -27,7 +27,7 @@ endif installed-mod-fw := $(addprefix $(INSTALL_FW_PATH)/,$(mod-fw)) installed-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-all)) -installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/. +installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/./ # Workaround for make < 3.81, where .SECONDEXPANSION doesn't work. PHONY += $(INSTALL_FW_PATH)/$$(%) install-all-dirs @@ -42,7 +42,7 @@ quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@) $(installed-fw-dirs): $(call cmd,mkdir) -$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $$(dir $(INSTALL_FW_PATH)/%) +$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %) $(call cmd,install) PHONY += __fw_install __fw_modinst FORCE -- cgit v1.2.3 From 24cc7fb69a5b5edfdff1d38c6a213d6a33648829 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Thu, 20 Sep 2012 10:28:45 -0400 Subject: x86/kbuild: archscripts depends on scripts_basic While building the SUSE kernel packages, which build the scripts, make clean, and then build everything, we have been running into spurious build failures. We tracked them down to a simple dependency issue: $ make mrproper CLEAN arch/x86/tools CLEAN scripts/basic $ cp patches/config/x86_64/desktop .config $ make archscripts HOSTCC arch/x86/tools/relocs /bin/sh: scripts/basic/fixdep: No such file or directory make[3]: *** [arch/x86/tools/relocs] Error 1 make[2]: *** [archscripts] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 This was introduced by commit 6520fe55 (x86, realmode: 16-bit real-mode code support for relocs), which added the archscripts dependency to archprepare. This patch adds the scripts_basic dependency to the x86 archscripts. Signed-off-by: Jeff Mahoney Signed-off-by: Michal Marek --- arch/x86/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index b0c5276861ec..c098ca4671de 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -138,7 +138,7 @@ KBUILD_CFLAGS += $(call cc-option,-mno-avx,) KBUILD_CFLAGS += $(mflags-y) KBUILD_AFLAGS += $(mflags-y) -archscripts: +archscripts: scripts_basic $(Q)$(MAKE) $(build)=arch/x86/tools relocs ### -- cgit v1.2.3 From b37b593e20a073dce5c7cbaf230f166db6425450 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Fri, 21 Sep 2012 10:48:03 -0600 Subject: vfio: Trivial Documentation correction Signed-off-by: Alex Williamson --- Documentation/vfio.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt index 0cb6685c8029..8eda3635a17d 100644 --- a/Documentation/vfio.txt +++ b/Documentation/vfio.txt @@ -133,7 +133,7 @@ character devices for this group: $ lspci -n -s 0000:06:0d.0 06:0d.0 0401: 1102:0002 (rev 08) # echo 0000:06:0d.0 > /sys/bus/pci/devices/0000:06:0d.0/driver/unbind -# echo 1102 0002 > /sys/bus/pci/drivers/vfio/new_id +# echo 1102 0002 > /sys/bus/pci/drivers/vfio-pci/new_id Now we need to look at what other devices are in the group to free it for use by VFIO: -- cgit v1.2.3 From b68e7fa879cd3b1126a7c455d9da1b70299efc0d Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Fri, 21 Sep 2012 10:48:28 -0600 Subject: vfio: Fix virqfd release race vfoi-pci supports a mechanism like KVM's irqfd for unmasking an interrupt through an eventfd. There are two ways to shutdown this interface: 1) close the eventfd, 2) ioctl (such as disabling the interrupt). Both of these do the release through a workqueue, which can result in a segfault if two jobs get queued for the same virqfd. Fix this by protecting the pointer to these virqfds by a spinlock. The vfio pci device will therefore no longer have a reference to it once the release job is queued under lock. On the ioctl side, we still flush the workqueue to ensure that any outstanding releases are completed. Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci_intrs.c | 76 ++++++++++++++++++++++++++++----------- 1 file changed, 56 insertions(+), 20 deletions(-) diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c index 211a4920b88a..d8dedc7d3910 100644 --- a/drivers/vfio/pci/vfio_pci_intrs.c +++ b/drivers/vfio/pci/vfio_pci_intrs.c @@ -76,9 +76,24 @@ static int virqfd_wakeup(wait_queue_t *wait, unsigned mode, int sync, void *key) schedule_work(&virqfd->inject); } - if (flags & POLLHUP) - /* The eventfd is closing, detach from VFIO */ - virqfd_deactivate(virqfd); + if (flags & POLLHUP) { + unsigned long flags; + spin_lock_irqsave(&virqfd->vdev->irqlock, flags); + + /* + * The eventfd is closing, if the virqfd has not yet been + * queued for release, as determined by testing whether the + * vdev pointer to it is still valid, queue it now. As + * with kvm irqfds, we know we won't race against the virqfd + * going away because we hold wqh->lock to get here. + */ + if (*(virqfd->pvirqfd) == virqfd) { + *(virqfd->pvirqfd) = NULL; + virqfd_deactivate(virqfd); + } + + spin_unlock_irqrestore(&virqfd->vdev->irqlock, flags); + } return 0; } @@ -93,7 +108,6 @@ static void virqfd_ptable_queue_proc(struct file *file, static void virqfd_shutdown(struct work_struct *work) { struct virqfd *virqfd = container_of(work, struct virqfd, shutdown); - struct virqfd **pvirqfd = virqfd->pvirqfd; u64 cnt; eventfd_ctx_remove_wait_queue(virqfd->eventfd, &virqfd->wait, &cnt); @@ -101,7 +115,6 @@ static void virqfd_shutdown(struct work_struct *work) eventfd_ctx_put(virqfd->eventfd); kfree(virqfd); - *pvirqfd = NULL; } static void virqfd_inject(struct work_struct *work) @@ -122,15 +135,11 @@ static int virqfd_enable(struct vfio_pci_device *vdev, int ret = 0; unsigned int events; - if (*pvirqfd) - return -EBUSY; - virqfd = kzalloc(sizeof(*virqfd), GFP_KERNEL); if (!virqfd) return -ENOMEM; virqfd->pvirqfd = pvirqfd; - *pvirqfd = virqfd; virqfd->vdev = vdev; virqfd->handler = handler; virqfd->thread = thread; @@ -153,6 +162,23 @@ static int virqfd_enable(struct vfio_pci_device *vdev, virqfd->eventfd = ctx; + /* + * virqfds can be released by closing the eventfd or directly + * through ioctl. These are both done through a workqueue, so + * we update the pointer to the virqfd under lock to avoid + * pushing multiple jobs to release the same virqfd. + */ + spin_lock_irq(&vdev->irqlock); + + if (*pvirqfd) { + spin_unlock_irq(&vdev->irqlock); + ret = -EBUSY; + goto fail; + } + *pvirqfd = virqfd; + + spin_unlock_irq(&vdev->irqlock); + /* * Install our own custom wake-up handling so we are notified via * a callback whenever someone signals the underlying eventfd. @@ -187,19 +213,29 @@ fail: fput(file); kfree(virqfd); - *pvirqfd = NULL; return ret; } -static void virqfd_disable(struct virqfd *virqfd) +static void virqfd_disable(struct vfio_pci_device *vdev, + struct virqfd **pvirqfd) { - if (!virqfd) - return; + unsigned long flags; + + spin_lock_irqsave(&vdev->irqlock, flags); + + if (*pvirqfd) { + virqfd_deactivate(*pvirqfd); + *pvirqfd = NULL; + } - virqfd_deactivate(virqfd); + spin_unlock_irqrestore(&vdev->irqlock, flags); - /* Block until we know all outstanding shutdown jobs have completed. */ + /* + * Block until we know all outstanding shutdown jobs have completed. + * Even if we don't queue the job, flush the wq to be sure it's + * been released. + */ flush_workqueue(vfio_irqfd_cleanup_wq); } @@ -392,8 +428,8 @@ static int vfio_intx_set_signal(struct vfio_pci_device *vdev, int fd) static void vfio_intx_disable(struct vfio_pci_device *vdev) { vfio_intx_set_signal(vdev, -1); - virqfd_disable(vdev->ctx[0].unmask); - virqfd_disable(vdev->ctx[0].mask); + virqfd_disable(vdev, &vdev->ctx[0].unmask); + virqfd_disable(vdev, &vdev->ctx[0].mask); vdev->irq_type = VFIO_PCI_NUM_IRQS; vdev->num_ctx = 0; kfree(vdev->ctx); @@ -539,8 +575,8 @@ static void vfio_msi_disable(struct vfio_pci_device *vdev, bool msix) vfio_msi_set_block(vdev, 0, vdev->num_ctx, NULL, msix); for (i = 0; i < vdev->num_ctx; i++) { - virqfd_disable(vdev->ctx[i].unmask); - virqfd_disable(vdev->ctx[i].mask); + virqfd_disable(vdev, &vdev->ctx[i].unmask); + virqfd_disable(vdev, &vdev->ctx[i].mask); } if (msix) { @@ -577,7 +613,7 @@ static int vfio_pci_set_intx_unmask(struct vfio_pci_device *vdev, vfio_send_intx_eventfd, NULL, &vdev->ctx[0].unmask, fd); - virqfd_disable(vdev->ctx[0].unmask); + virqfd_disable(vdev, &vdev->ctx[0].unmask); } return 0; -- cgit v1.2.3 From bf619faeced5c2beb32a39559e1f1117f88fd702 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 21 Sep 2012 17:55:20 +0100 Subject: ARM: reserve syscall 378 for kcmp kcmp has appeared on x86, but has not been noticed because checksyscalls.sh is broken at the moment. Reserve ARM syscall 378 for this should we ever need it, and add an __IGNORE entry for this unimplemented syscall. Signed-off-by: Russell King --- arch/arm/include/asm/unistd.h | 2 ++ arch/arm/kernel/calls.S | 1 + 2 files changed, 3 insertions(+) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 0cab47d4a83f..2fde5fd1acce 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -404,6 +404,7 @@ #define __NR_setns (__NR_SYSCALL_BASE+375) #define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) #define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) + /* 378 for kcmp */ /* * The following SWIs are ARM private. @@ -483,6 +484,7 @@ */ #define __IGNORE_fadvise64_64 #define __IGNORE_migrate_pages +#define __IGNORE_kcmp #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 463ff4a0ec8a..e337879595e5 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -387,6 +387,7 @@ /* 375 */ CALL(sys_setns) CALL(sys_process_vm_readv) CALL(sys_process_vm_writev) + CALL(sys_ni_syscall) /* reserved for sys_kcmp */ #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted -- cgit v1.2.3 From 185d4c8bf579322e1c2835d70729bc30f6f80f55 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Thu, 20 Sep 2012 05:26:41 +0000 Subject: bnx2x: remove false warning regarding interrupt number Since version 7.4 the FW configures in the pci config space the max number of interrupts available to the physical function, instead of the exact number to use. This causes a false warning in driver when comparing the number of configured interrupts to the number about to be used. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 211753e01f81..0875ecfe3372 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9831,12 +9831,13 @@ static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp) } #ifdef CONFIG_PCI_MSI - /* - * It's expected that number of CAM entries for this functions is equal - * to the number evaluated based on the MSI-X table size. We want a - * harsh warning if these values are different! + /* Due to new PF resource allocation by MFW T7.4 and above, it's + * optional that number of CAM entries will not be equal to the value + * advertised in PCI. + * Driver should use the minimal value of both as the actual status + * block count */ - WARN_ON(bp->igu_sb_cnt != igu_sb_cnt); + bp->igu_sb_cnt = min_t(int, bp->igu_sb_cnt, igu_sb_cnt); #endif if (igu_sb_cnt == 0) -- cgit v1.2.3 From 36048853c5257a7b6df346b83758ffa776a59e9f Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Fri, 21 Sep 2012 02:16:29 -0700 Subject: debugfs: fix race in u32_array_read and allocate array at open u32_array_open() is racy when multiple threads read from a file with a seek position of zero, i.e. when two or more simultaneous reads are occurring after the non-seekable files are created. It is possible that file->private_data is double-freed because the threads races between kfree(file->private-data); and file->private_data = NULL; The fix is to only do format_array_alloc() when the file is opened and free it when it is closed. Note that because the file has always been non-seekable, you can't open it and read it multiple times anyway, so the data has always been generated just once. The difference is that now it is generated at open time rather than at the time of the first read, and that avoids the race. Reported-by: Dave Jones Acked-by: Konrad Rzeszutek Wilk Tested-by: Raghavendra Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds --- fs/debugfs/file.c | 33 +++++++++++---------------------- 1 file changed, 11 insertions(+), 22 deletions(-) diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index 2340f6978d6e..a09d3c0aad68 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -526,12 +526,6 @@ struct array_data { u32 elements; }; -static int u32_array_open(struct inode *inode, struct file *file) -{ - file->private_data = NULL; - return nonseekable_open(inode, file); -} - static size_t format_array(char *buf, size_t bufsize, const char *fmt, u32 *array, u32 array_size) { @@ -573,26 +567,21 @@ static char *format_array_alloc(const char *fmt, u32 *array, return ret; } -static ssize_t u32_array_read(struct file *file, char __user *buf, size_t len, - loff_t *ppos) +static int u32_array_open(struct inode *inode, struct file *file) { - struct inode *inode = file->f_path.dentry->d_inode; struct array_data *data = inode->i_private; - size_t size; - if (*ppos == 0) { - if (file->private_data) { - kfree(file->private_data); - file->private_data = NULL; - } - - file->private_data = format_array_alloc("%u", data->array, - data->elements); - } + file->private_data = format_array_alloc("%u", data->array, + data->elements); + if (!file->private_data) + return -ENOMEM; + return nonseekable_open(inode, file); +} - size = 0; - if (file->private_data) - size = strlen(file->private_data); +static ssize_t u32_array_read(struct file *file, char __user *buf, size_t len, + loff_t *ppos) +{ + size_t size = strlen(file->private_data); return simple_read_from_buffer(buf, len, ppos, file->private_data, size); -- cgit v1.2.3 From f950c0ecc78f745e490d615280e031de4dbb1306 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 20 Sep 2012 18:29:56 +0000 Subject: ipv6: fix return value check in fib6_add() In case of error, the function fib6_add_1() returns ERR_PTR() or NULL pointer. The ERR_PTR() case check is missing in fib6_add(). dpatch engine is used to generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- net/ipv6/ip6_fib.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 13690d650c3e..286acfc21250 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -819,6 +819,10 @@ int fib6_add(struct fib6_node *root, struct rt6_info *rt, struct nl_info *info) offsetof(struct rt6_info, rt6i_src), allow_create, replace_required); + if (IS_ERR(sn)) { + err = PTR_ERR(sn); + sn = NULL; + } if (!sn) { /* If it is failed, discard just allocated root, and then (in st_failure) stale node -- cgit v1.2.3 From 28889b7e7818342f6c254e27b9b2c68702ab867a Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Thu, 20 Sep 2012 19:11:12 +0000 Subject: gianfar: fix phc index build failure This patch fixes a build failure introduced in commit 66636287 ("gianfar: Support the get_ts_info ethtool method."). Not only was a global variable inconsistently named, but also it was not exported as it should have been. This fix is also needed in stable version 3.5. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar_ethtool.c | 1 + drivers/net/ethernet/freescale/gianfar_ptp.c | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index 8971921cc1c8..ab6762caa957 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -1773,6 +1773,7 @@ static int gfar_get_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd, } int gfar_phc_index = -1; +EXPORT_SYMBOL(gfar_phc_index); static int gfar_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info) diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index c08e5d40fecb..0daa66b8eca0 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -515,7 +515,7 @@ static int gianfar_ptp_probe(struct platform_device *dev) err = PTR_ERR(etsects->clock); goto no_clock; } - gfar_phc_clock = ptp_clock_index(etsects->clock); + gfar_phc_index = ptp_clock_index(etsects->clock); dev_set_drvdata(&dev->dev, etsects); @@ -539,7 +539,7 @@ static int gianfar_ptp_remove(struct platform_device *dev) gfar_write(&etsects->regs->tmr_temask, 0); gfar_write(&etsects->regs->tmr_ctrl, 0); - gfar_phc_clock = -1; + gfar_phc_index = -1; ptp_clock_unregister(etsects->clock); iounmap(etsects->regs); release_resource(etsects->rsrc); -- cgit v1.2.3 From 6861509f9fee9c5e568c5f6852bb96f2475b4179 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 20 Sep 2012 21:06:10 +0000 Subject: stmmac: fix return value check in stmmac_open_ext_timer() In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c index 2a0e1abde7e7..197fb8cde1d3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c @@ -109,7 +109,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) { timer_clock = clk_get(NULL, TMU_CHANNEL); - if (timer_clock == NULL) + if (IS_ERR(timer_clock)) return -1; if (tmu2_register_user(stmmac_timer_handler, (void *)dev) < 0) { -- cgit v1.2.3 From dc9c9759ebc65d886453c335b2b5be39f87ab01e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 20 Sep 2012 21:13:55 +0000 Subject: net/irda: sh_sir: fix return value check in sh_sir_set_baudrate() In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/irda/sh_sir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c index 256eddf1f75a..795109425568 100644 --- a/drivers/net/irda/sh_sir.c +++ b/drivers/net/irda/sh_sir.c @@ -280,7 +280,7 @@ static int sh_sir_set_baudrate(struct sh_sir_self *self, u32 baudrate) } clk = clk_get(NULL, "irda_clk"); - if (!clk) { + if (IS_ERR(clk)) { dev_err(dev, "can not get irda_clk\n"); return -EIO; } -- cgit v1.2.3 From bf5b30b8a4416de04f1ac1196281ddb318669464 Mon Sep 17 00:00:00 2001 From: Zhao Hongjiang Date: Thu, 20 Sep 2012 22:37:25 +0000 Subject: net: change return values from -EACCES to -EPERM Change return value from -EACCES to -EPERM when the permission check fails. Signed-off-by: Zhao Hongjiang Signed-off-by: David S. Miller --- net/bluetooth/bnep/sock.c | 4 ++-- net/bluetooth/cmtp/sock.c | 4 ++-- net/bluetooth/hci_sock.c | 16 ++++++++-------- net/bluetooth/hidp/sock.c | 4 ++-- net/ipv4/devinet.c | 4 ++-- net/netrom/af_netrom.c | 2 +- 6 files changed, 17 insertions(+), 17 deletions(-) diff --git a/net/bluetooth/bnep/sock.c b/net/bluetooth/bnep/sock.c index 5e5f5b410e0b..1eaacf10d19d 100644 --- a/net/bluetooth/bnep/sock.c +++ b/net/bluetooth/bnep/sock.c @@ -58,7 +58,7 @@ static int bnep_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long switch (cmd) { case BNEPCONNADD: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (copy_from_user(&ca, argp, sizeof(ca))) return -EFAULT; @@ -84,7 +84,7 @@ static int bnep_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long case BNEPCONNDEL: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (copy_from_user(&cd, argp, sizeof(cd))) return -EFAULT; diff --git a/net/bluetooth/cmtp/sock.c b/net/bluetooth/cmtp/sock.c index 311668d14571..32dc83dcb6b2 100644 --- a/net/bluetooth/cmtp/sock.c +++ b/net/bluetooth/cmtp/sock.c @@ -72,7 +72,7 @@ static int cmtp_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long switch (cmd) { case CMTPCONNADD: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (copy_from_user(&ca, argp, sizeof(ca))) return -EFAULT; @@ -97,7 +97,7 @@ static int cmtp_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long case CMTPCONNDEL: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (copy_from_user(&cd, argp, sizeof(cd))) return -EFAULT; diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 19fdac78e555..d5ace1eda3ed 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -490,7 +490,7 @@ static int hci_sock_bound_ioctl(struct sock *sk, unsigned int cmd, switch (cmd) { case HCISETRAW: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (test_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks)) return -EPERM; @@ -510,12 +510,12 @@ static int hci_sock_bound_ioctl(struct sock *sk, unsigned int cmd, case HCIBLOCKADDR: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_sock_blacklist_add(hdev, (void __user *) arg); case HCIUNBLOCKADDR: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_sock_blacklist_del(hdev, (void __user *) arg); default: @@ -546,22 +546,22 @@ static int hci_sock_ioctl(struct socket *sock, unsigned int cmd, case HCIDEVUP: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_dev_open(arg); case HCIDEVDOWN: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_dev_close(arg); case HCIDEVRESET: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_dev_reset(arg); case HCIDEVRESTAT: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_dev_reset_stat(arg); case HCISETSCAN: @@ -573,7 +573,7 @@ static int hci_sock_ioctl(struct socket *sock, unsigned int cmd, case HCISETACLMTU: case HCISETSCOMTU: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_dev_cmd(cmd, argp); case HCIINQUIRY: diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c index 18b3f6892a36..b24fb3bd8625 100644 --- a/net/bluetooth/hidp/sock.c +++ b/net/bluetooth/hidp/sock.c @@ -56,7 +56,7 @@ static int hidp_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long switch (cmd) { case HIDPCONNADD: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (copy_from_user(&ca, argp, sizeof(ca))) return -EFAULT; @@ -91,7 +91,7 @@ static int hidp_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long case HIDPCONNDEL: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (copy_from_user(&cd, argp, sizeof(cd))) return -EFAULT; diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 9b55b6f5a585..e12fad773852 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -725,7 +725,7 @@ int devinet_ioctl(struct net *net, unsigned int cmd, void __user *arg) break; case SIOCSIFFLAGS: - ret = -EACCES; + ret = -EPERM; if (!capable(CAP_NET_ADMIN)) goto out; break; @@ -733,7 +733,7 @@ int devinet_ioctl(struct net *net, unsigned int cmd, void __user *arg) case SIOCSIFBRDADDR: /* Set the broadcast address */ case SIOCSIFDSTADDR: /* Set the destination address */ case SIOCSIFNETMASK: /* Set the netmask for the interface */ - ret = -EACCES; + ret = -EPERM; if (!capable(CAP_NET_ADMIN)) goto out; ret = -EINVAL; diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 1b9024ee963c..7261eb81974f 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -601,7 +601,7 @@ static int nr_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) if (!capable(CAP_NET_BIND_SERVICE)) { dev_put(dev); release_sock(sk); - return -EACCES; + return -EPERM; } nr->user_addr = addr->fsa_digipeater[0]; nr->source_addr = addr->fsa_ax25.sax25_call; -- cgit v1.2.3 From e05e279e6fc940a2adb9d4d4bf2b814dfc286176 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 21 Sep 2012 11:48:05 -0700 Subject: debugfs: fix u32_array race in format_array_alloc The format_array_alloc() function is fundamentally racy, in that it prints the array twice: once to figure out how much space to allocate for the buffer, and the second time to actually print out the data. If any of the array contents changes in between, the allocation size may be wrong, and the end result may be truncated in odd ways. Just don't do it. Allocate a maximum-sized array up-front, and just format the array contents once. The only user of the u32_array interfaces is the Xen spinlock statistics code, and it has 31 entries in the arrays, so the maximum size really isn't that big, and the end result is much simpler code without the bug. Signed-off-by: Linus Torvalds --- fs/debugfs/file.c | 57 ++++++++++++++++++++++--------------------------------- 1 file changed, 23 insertions(+), 34 deletions(-) diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index a09d3c0aad68..c5ca6ae5a30c 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -526,55 +526,44 @@ struct array_data { u32 elements; }; -static size_t format_array(char *buf, size_t bufsize, const char *fmt, - u32 *array, u32 array_size) +static size_t u32_format_array(char *buf, size_t bufsize, + u32 *array, int array_size) { size_t ret = 0; - u32 i; - for (i = 0; i < array_size; i++) { + while (--array_size >= 0) { size_t len; + char term = array_size ? ' ' : '\n'; - len = snprintf(buf, bufsize, fmt, array[i]); - len++; /* ' ' or '\n' */ + len = snprintf(buf, bufsize, "%u%c", *array++, term); ret += len; - if (buf) { - buf += len; - bufsize -= len; - buf[-1] = (i == array_size-1) ? '\n' : ' '; - } + buf += len; + bufsize -= len; } - - ret++; /* \0 */ - if (buf) - *buf = '\0'; - - return ret; -} - -static char *format_array_alloc(const char *fmt, u32 *array, - u32 array_size) -{ - size_t len = format_array(NULL, 0, fmt, array, array_size); - char *ret; - - ret = kmalloc(len, GFP_KERNEL); - if (ret == NULL) - return NULL; - - format_array(ret, len, fmt, array, array_size); return ret; } static int u32_array_open(struct inode *inode, struct file *file) { struct array_data *data = inode->i_private; - - file->private_data = format_array_alloc("%u", data->array, - data->elements); - if (!file->private_data) + int size, elements = data->elements; + char *buf; + + /* + * Max size: + * - 10 digits + ' '/'\n' = 11 bytes per number + * - terminating NUL character + */ + size = elements*11; + buf = kmalloc(size+1, GFP_KERNEL); + if (!buf) return -ENOMEM; + buf[size] = 0; + + file->private_data = buf; + u32_format_array(buf, size, data->array, data->elements); + return nonseekable_open(inode, file); } -- cgit v1.2.3 From a630844d898ae8a0b4a3db84af061150682e0d3c Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 21 Sep 2012 01:06:29 +0000 Subject: net/stmmac: Use clk_prepare_enable and clk_disable_unprepare This patch fixes an issue introduced by commit ID 6a81c26f [net/stmmac: remove conditional compilation of clk code], which switched from the internal stmmac_clk_{en}{dis}able calls to clk_{en}{dis}able. By this, calling clk_prepare and clk_unprepare was removed. clk_{un}prepare is mandatory for platforms using common clock framework. Since these drivers are used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for them. Otherwise the clocks are not correctly en-/disabled and ethernet support doesn't work. Signed-off-by: Stefan Roese Cc: Viresh Kumar Cc: Giuseppe Cavallaro Reviewed-by: Viresh Kumar Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 +++++----- drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c | 6 +++--- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index c136162e6473..3be88331d17a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1066,7 +1066,7 @@ static int stmmac_open(struct net_device *dev) } else priv->tm->enable = 1; #endif - clk_enable(priv->stmmac_clk); + clk_prepare_enable(priv->stmmac_clk); stmmac_check_ether_addr(priv); @@ -1188,7 +1188,7 @@ open_error: if (priv->phydev) phy_disconnect(priv->phydev); - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); return ret; } @@ -1246,7 +1246,7 @@ static int stmmac_release(struct net_device *dev) #ifdef CONFIG_STMMAC_DEBUG_FS stmmac_exit_fs(); #endif - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); return 0; } @@ -2178,7 +2178,7 @@ int stmmac_suspend(struct net_device *ndev) else { stmmac_set_mac(priv->ioaddr, false); /* Disable clock in case of PWM is off */ - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); } spin_unlock_irqrestore(&priv->lock, flags); return 0; @@ -2203,7 +2203,7 @@ int stmmac_resume(struct net_device *ndev) priv->hw->mac->pmt(priv->ioaddr, 0); else /* enable the clk prevously disabled */ - clk_enable(priv->stmmac_clk); + clk_prepare_enable(priv->stmmac_clk); netif_device_attach(ndev); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c index 197fb8cde1d3..4ccd4e2977b7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c @@ -97,12 +97,12 @@ static struct clk *timer_clock; static void stmmac_tmu_start(unsigned int new_freq) { clk_set_rate(timer_clock, new_freq); - clk_enable(timer_clock); + clk_prepare_enable(timer_clock); } static void stmmac_tmu_stop(void) { - clk_disable(timer_clock); + clk_disable_unprepare(timer_clock); } int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) @@ -126,7 +126,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) int stmmac_close_ext_timer(void) { - clk_disable(timer_clock); + clk_disable_unprepare(timer_clock); tmu2_unregister_user(); clk_put(timer_clock); return 0; -- cgit v1.2.3 From dfa520af2c20aa3c75f0497d49165561212a1c6f Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Mon, 17 Sep 2012 19:59:52 +0000 Subject: sparc32: Enable the relocation target R_SPARC_DISP32 for sparc32 GNU Binutils 2.20.1 generates .eh_frame sections that uses R_SPARC_DISP32. Signed-off-by: Andreas Larsson Signed-off-by: David S. Miller --- arch/sparc/kernel/module.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c index 15e0a1693976..bae6ab600b7f 100644 --- a/arch/sparc/kernel/module.c +++ b/arch/sparc/kernel/module.c @@ -116,6 +116,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs, v = sym->st_value + rel[i].r_addend; switch (ELF_R_TYPE(rel[i].r_info) & 0xff) { + case R_SPARC_DISP32: + v -= (Elf_Addr) location; + *loc32 = v; + break; #ifdef CONFIG_SPARC64 case R_SPARC_64: location[0] = v >> 56; @@ -128,11 +132,6 @@ int apply_relocate_add(Elf_Shdr *sechdrs, location[7] = v >> 0; break; - case R_SPARC_DISP32: - v -= (Elf_Addr) location; - *loc32 = v; - break; - case R_SPARC_WDISP19: v -= (Elf_Addr) location; *loc32 = (*loc32 & ~0x7ffff) | -- cgit v1.2.3 From a9e8d1a6b87167116e5779378f1d25ffed2e833b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 20 Sep 2012 18:57:51 +0000 Subject: sparc: fix the return value of module_alloc() In case of error, function module_alloc() in other platform never returns ERR_PTR(), and all of the user only check for NULL, so we'd better return NULL instead of ERR_PTR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- arch/sparc/kernel/module.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c index bae6ab600b7f..f1ddc0d23679 100644 --- a/arch/sparc/kernel/module.c +++ b/arch/sparc/kernel/module.c @@ -48,9 +48,7 @@ void *module_alloc(unsigned long size) return NULL; ret = module_map(size); - if (!ret) - ret = ERR_PTR(-ENOMEM); - else + if (ret) memset(ret, 0, size); return ret; -- cgit v1.2.3 From 340c7a2b2c9a2da640af28a8c196356484ac8b50 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 10 Aug 2012 13:12:07 -0700 Subject: rbd: drop dev reference on error in rbd_open() If a read-only rbd device is opened for writing in rbd_open(), it returns without dropping the just-acquired device reference. Fix this by moving the read-only check before getting the reference. Signed-off-by: Alex Elder Reviewed-by: Yehuda Sadeh Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 9917943a3572..54a55f03115d 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -246,13 +246,12 @@ static int rbd_open(struct block_device *bdev, fmode_t mode) { struct rbd_device *rbd_dev = bdev->bd_disk->private_data; - rbd_get_dev(rbd_dev); - - set_device_ro(bdev, rbd_dev->read_only); - if ((mode & FMODE_WRITE) && rbd_dev->read_only) return -EROFS; + rbd_get_dev(rbd_dev); + set_device_ro(bdev, rbd_dev->read_only); + return 0; } -- cgit v1.2.3 From 5ce765a540f34d1e2005e1210f49f67fdf11e997 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 21 Sep 2012 17:59:58 -0500 Subject: libceph: only kunmap kmapped pages In write_partial_msg_pages(), pages need to be kmapped in order to perform a CRC-32c calculation on them. As an artifact of the way this code used to be structured, the kunmap() call was separated from the kmap() call and both were done conditionally. But the conditions under which the kmap() and kunmap() calls were made differed, so there was a chance a kunmap() call would be done on a page that had not been mapped. The symptom of this was tripping a BUG() in kunmap_high() when pkmap_count[nr] became 0. Reported-by: Bryan K. Wright Signed-off-by: Alex Elder Reviewed-by: Sage Weil --- net/ceph/messenger.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index 24c5eea8c45b..159aa8bef9e7 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -1073,16 +1073,13 @@ static int write_partial_msg_pages(struct ceph_connection *con) BUG_ON(kaddr == NULL); base = kaddr + con->out_msg_pos.page_pos + bio_offset; crc = crc32c(crc, base, len); + kunmap(page); msg->footer.data_crc = cpu_to_le32(crc); con->out_msg_pos.did_page_crc = true; } ret = ceph_tcp_sendpage(con->sock, page, con->out_msg_pos.page_pos + bio_offset, len, 1); - - if (do_datacrc) - kunmap(page); - if (ret <= 0) goto out; -- cgit v1.2.3 From 391499801b1b31f39c8e8ac382ac97f5e3742934 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 13 Sep 2012 13:25:12 +0800 Subject: HID: lenovo-tpkbd: Fix memory leak in tpkbd_remove_tp() We need to kfree names for led_mute and led_micmute in tpkbd_remove_tp(). Signed-off-by: Axel Lin Acked-by: Bernhard Seibold Signed-off-by: Jiri Kosina --- drivers/hid/hid-lenovo-tpkbd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-lenovo-tpkbd.c b/drivers/hid/hid-lenovo-tpkbd.c index 77d2df04c97b..60c4e1e85913 100644 --- a/drivers/hid/hid-lenovo-tpkbd.c +++ b/drivers/hid/hid-lenovo-tpkbd.c @@ -519,6 +519,8 @@ static void tpkbd_remove_tp(struct hid_device *hdev) led_classdev_unregister(&data_pointer->led_mute); hid_set_drvdata(hdev, NULL); + kfree(data_pointer->led_micmute.name); + kfree(data_pointer->led_mute.name); kfree(data_pointer); } -- cgit v1.2.3 From 596264082f10dd4a567c43d4526b2f54ac5520bc Mon Sep 17 00:00:00 2001 From: Nestor Lopez Casado Date: Fri, 21 Sep 2012 12:21:34 +0200 Subject: HID: Fix logitech-dj: missing Unifying device issue This patch fixes an issue introduced after commit 4ea5454203d991ec ("HID: Fix race condition between driver core and ll-driver"). After that commit, hid-core discards any incoming packet that arrives while hid driver's probe function is being executed. This broke the enumeration process of hid-logitech-dj, that must receive control packets in-band with the mouse and keyboard packets. Discarding mouse or keyboard data at the very begining is usually fine, but it is not the case for control packets. This patch forces a re-enumeration of the paired devices when a packet arrives that comes from an unknown device. Based on a patch originally written by Benjamin Tissoires. Cc: stable@vger.kernel.org # v3.2+ Signed-off-by: Nestor Lopez Casado Signed-off-by: Jiri Kosina --- drivers/hid/hid-logitech-dj.c | 45 +++++++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-logitech-dj.h | 1 + 2 files changed, 46 insertions(+) diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 4d524b5f52f5..9500f2f3f8fe 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -193,6 +193,7 @@ static struct hid_ll_driver logi_dj_ll_driver; static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf, size_t count, unsigned char report_type); +static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev); static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev, struct dj_report *dj_report) @@ -233,6 +234,7 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev, if (dj_report->report_params[DEVICE_PAIRED_PARAM_SPFUNCTION] & SPFUNCTION_DEVICE_LIST_EMPTY) { dbg_hid("%s: device list is empty\n", __func__); + djrcv_dev->querying_devices = false; return; } @@ -243,6 +245,12 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev, return; } + if (djrcv_dev->paired_dj_devices[dj_report->device_index]) { + /* The device is already known. No need to reallocate it. */ + dbg_hid("%s: device is already known\n", __func__); + return; + } + dj_hiddev = hid_allocate_device(); if (IS_ERR(dj_hiddev)) { dev_err(&djrcv_hdev->dev, "%s: hid_allocate_device failed\n", @@ -306,6 +314,7 @@ static void delayedwork_callback(struct work_struct *work) struct dj_report dj_report; unsigned long flags; int count; + int retval; dbg_hid("%s\n", __func__); @@ -338,6 +347,25 @@ static void delayedwork_callback(struct work_struct *work) logi_dj_recv_destroy_djhid_device(djrcv_dev, &dj_report); break; default: + /* A normal report (i. e. not belonging to a pair/unpair notification) + * arriving here, means that the report arrived but we did not have a + * paired dj_device associated to the report's device_index, this + * means that the original "device paired" notification corresponding + * to this dj_device never arrived to this driver. The reason is that + * hid-core discards all packets coming from a device while probe() is + * executing. */ + if (!djrcv_dev->paired_dj_devices[dj_report.device_index]) { + /* ok, we don't know the device, just re-ask the + * receiver for the list of connected devices. */ + retval = logi_dj_recv_query_paired_devices(djrcv_dev); + if (!retval) { + /* everything went fine, so just leave */ + break; + } + dev_err(&djrcv_dev->hdev->dev, + "%s:logi_dj_recv_query_paired_devices " + "error:%d\n", __func__, retval); + } dbg_hid("%s: unexpected report type\n", __func__); } } @@ -368,6 +396,12 @@ static void logi_dj_recv_forward_null_report(struct dj_receiver_dev *djrcv_dev, if (!djdev) { dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]" " is NULL, index %d\n", dj_report->device_index); + kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report)); + + if (schedule_work(&djrcv_dev->work) == 0) { + dbg_hid("%s: did not schedule the work item, was already " + "queued\n", __func__); + } return; } @@ -398,6 +432,12 @@ static void logi_dj_recv_forward_report(struct dj_receiver_dev *djrcv_dev, if (dj_device == NULL) { dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]" " is NULL, index %d\n", dj_report->device_index); + kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report)); + + if (schedule_work(&djrcv_dev->work) == 0) { + dbg_hid("%s: did not schedule the work item, was already " + "queued\n", __func__); + } return; } @@ -439,6 +479,10 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) struct dj_report *dj_report; int retval; + /* no need to protect djrcv_dev->querying_devices */ + if (djrcv_dev->querying_devices) + return 0; + dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) return -ENOMEM; @@ -450,6 +494,7 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) return retval; } + static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, unsigned timeout) { diff --git a/drivers/hid/hid-logitech-dj.h b/drivers/hid/hid-logitech-dj.h index fd28a5e0ca3b..4a4000340ce1 100644 --- a/drivers/hid/hid-logitech-dj.h +++ b/drivers/hid/hid-logitech-dj.h @@ -101,6 +101,7 @@ struct dj_receiver_dev { struct work_struct work; struct kfifo notif_fifo; spinlock_t lock; + bool querying_devices; }; struct dj_device { -- cgit v1.2.3 From 9913b8c8f05b0aad97432900fa3b2cdfd557eeb5 Mon Sep 17 00:00:00 2001 From: Peter Hüwe Date: Fri, 21 Sep 2012 16:44:18 +0000 Subject: net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver Currently the driver has no MODULE_LICENSE attribute in its source which results in a kernel taint if I load this: root@(none):~# modprobe bcm87xx bcm87xx: module license 'unspecified' taints kernel. Since the first lines of the source code clearly state: * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this * archive for more details. I think it's safe to add the MODULE_LICENSE("GPL") macro and thus remove the kernel taint. Cc: stable@vger.kernel.org Signed-off-by: Peter Huewe Signed-off-by: David S. Miller --- drivers/net/phy/bcm87xx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c index 2346b38b9837..799789518e87 100644 --- a/drivers/net/phy/bcm87xx.c +++ b/drivers/net/phy/bcm87xx.c @@ -229,3 +229,5 @@ static void __exit bcm87xx_exit(void) ARRAY_SIZE(bcm87xx_driver)); } module_exit(bcm87xx_exit); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From ab43ed8b7490cb387782423ecf74aeee7237e591 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 22 Sep 2012 00:08:29 +0000 Subject: ipv4: raw: fix icmp_filter() icmp_filter() should not modify its input, or else its caller would need to recompute ip_hdr() if skb->head is reallocated. Use skb_header_pointer() instead of pskb_may_pull() and change the prototype to make clear both sk and skb are const. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/raw.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index ff0f071969ea..d23c6571ba1c 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -131,18 +131,20 @@ found: * 0 - deliver * 1 - block */ -static __inline__ int icmp_filter(struct sock *sk, struct sk_buff *skb) +static int icmp_filter(const struct sock *sk, const struct sk_buff *skb) { - int type; + struct icmphdr _hdr; + const struct icmphdr *hdr; - if (!pskb_may_pull(skb, sizeof(struct icmphdr))) + hdr = skb_header_pointer(skb, skb_transport_offset(skb), + sizeof(_hdr), &_hdr); + if (!hdr) return 1; - type = icmp_hdr(skb)->type; - if (type < 32) { + if (hdr->type < 32) { __u32 data = raw_sk(sk)->filter.data; - return ((1 << type) & data) != 0; + return ((1U << hdr->type) & data) != 0; } /* Do not block unknown ICMP types */ -- cgit v1.2.3 From 0b121fd28d071c766dddab743031ba6cfe9be68e Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sat, 22 Sep 2012 07:07:53 +0000 Subject: team: send port changed when added On some hw, link is not up during adding iface to team. That causes event not being sent to userspace and that may cause confusion. Fix this bug by sending port changed event once it's added to team. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 341b65dbbcd3..3ffe8a6e3c8b 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -848,7 +848,7 @@ static struct netpoll_info *team_netpoll_info(struct team *team) } #endif -static void __team_port_change_check(struct team_port *port, bool linkup); +static void __team_port_change_port_added(struct team_port *port, bool linkup); static int team_port_add(struct team *team, struct net_device *port_dev) { @@ -948,7 +948,7 @@ static int team_port_add(struct team *team, struct net_device *port_dev) team_port_enable(team, port); list_add_tail_rcu(&port->list, &team->port_list); __team_compute_features(team); - __team_port_change_check(port, !!netif_carrier_ok(port_dev)); + __team_port_change_port_added(port, !!netif_carrier_ok(port_dev)); __team_options_change_check(team); netdev_info(dev, "Port device %s added\n", portname); @@ -983,6 +983,8 @@ err_set_mtu: return err; } +static void __team_port_change_port_removed(struct team_port *port); + static int team_port_del(struct team *team, struct net_device *port_dev) { struct net_device *dev = team->dev; @@ -999,8 +1001,7 @@ static int team_port_del(struct team *team, struct net_device *port_dev) __team_option_inst_mark_removed_port(team, port); __team_options_change_check(team); __team_option_inst_del_port(team, port); - port->removed = true; - __team_port_change_check(port, false); + __team_port_change_port_removed(port); team_port_disable(team, port); list_del_rcu(&port->list); netdev_rx_handler_unregister(port_dev); @@ -2251,13 +2252,11 @@ static void __team_options_change_check(struct team *team) } /* rtnl lock is held */ -static void __team_port_change_check(struct team_port *port, bool linkup) + +static void __team_port_change_send(struct team_port *port, bool linkup) { int err; - if (!port->removed && port->state.linkup == linkup) - return; - port->changed = true; port->state.linkup = linkup; team_refresh_port_linkup(port); @@ -2282,6 +2281,23 @@ send_event: } +static void __team_port_change_check(struct team_port *port, bool linkup) +{ + if (port->state.linkup != linkup) + __team_port_change_send(port, linkup); +} + +static void __team_port_change_port_added(struct team_port *port, bool linkup) +{ + __team_port_change_send(port, linkup); +} + +static void __team_port_change_port_removed(struct team_port *port) +{ + port->removed = true; + __team_port_change_send(port, false); +} + static void team_port_change_check(struct team_port *port, bool linkup) { struct team *team = port->team; -- cgit v1.2.3 From 2b018d57ff18e5405823e5cb59651a5b4d946d7b Mon Sep 17 00:00:00 2001 From: Xiaodong Xu Date: Sat, 22 Sep 2012 00:09:32 +0000 Subject: pppoe: drop PPPOX_ZOMBIEs in pppoe_release When PPPOE is running over a virtual ethernet interface (e.g., a bonding interface) and the user tries to delete the interface in case the PPPOE state is ZOMBIE, the kernel will loop forever while unregistering net_device for the reference count is not decreased to zero which should have been done with dev_put(). Signed-off-by: Xiaodong Xu Signed-off-by: David S. Miller --- drivers/net/ppp/pppoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index cbf7047decc0..20f31d0d1536 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -570,7 +570,7 @@ static int pppoe_release(struct socket *sock) po = pppox_sk(sk); - if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { + if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND | PPPOX_ZOMBIE)) { dev_put(po->pppoe_dev); po->pppoe_dev = NULL; } -- cgit v1.2.3 From 156cacb1d0d36b0d0582d9e798e58e0044f516b3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Sep 2012 08:19:02 -0400 Subject: do_add_mount()/umount -l races normally we deal with lock_mount()/umount races by checking that mountpoint to be is still in our namespace after lock_mount() has been done. However, do_add_mount() skips that check when called with MNT_SHRINKABLE in flags (i.e. from finish_automount()). The reason is that ->mnt_ns may be a temporary namespace created exactly to contain automounts a-la NFS4 referral handling. It's not the namespace of the caller, though, so check_mnt() would fail here. We still need to check that ->mnt_ns is non-NULL in that case, though. Signed-off-by: Al Viro --- fs/namespace.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/namespace.c b/fs/namespace.c index 4d31f73e2561..7bdf7907413f 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1886,8 +1886,14 @@ static int do_add_mount(struct mount *newmnt, struct path *path, int mnt_flags) return err; err = -EINVAL; - if (!(mnt_flags & MNT_SHRINKABLE) && !check_mnt(real_mount(path->mnt))) - goto unlock; + if (unlikely(!check_mnt(real_mount(path->mnt)))) { + /* that's acceptable only for automounts done in private ns */ + if (!(mnt_flags & MNT_SHRINKABLE)) + goto unlock; + /* ... and for those we'd better have mountpoint still alive */ + if (!real_mount(path->mnt)->mnt_ns) + goto unlock; + } /* Refuse the same filesystem on the same mount point */ err = -EBUSY; -- cgit v1.2.3 From c5aa1e554a20fb3542c62688ae46049c9225a965 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 29 Aug 2012 09:00:01 -0400 Subject: close the race in nlmsvc_free_block() we need to grab mutex before the reference counter reaches 0 Signed-off-by: Al Viro --- fs/lockd/svclock.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c index fb1a2bedbe97..8d80c990dffd 100644 --- a/fs/lockd/svclock.c +++ b/fs/lockd/svclock.c @@ -289,7 +289,6 @@ static void nlmsvc_free_block(struct kref *kref) dprintk("lockd: freeing block %p...\n", block); /* Remove block from file's list of blocks */ - mutex_lock(&file->f_mutex); list_del_init(&block->b_flist); mutex_unlock(&file->f_mutex); @@ -303,7 +302,7 @@ static void nlmsvc_free_block(struct kref *kref) static void nlmsvc_release_block(struct nlm_block *block) { if (block != NULL) - kref_put(&block->b_count, nlmsvc_free_block); + kref_put_mutex(&block->b_count, nlmsvc_free_block, &block->b_file->f_mutex); } /* -- cgit v1.2.3 From 1ec3ddfd27a77db55b8c0e80bcd27c656473fb96 Mon Sep 17 00:00:00 2001 From: Silas Boyd-Wickizer Date: Sun, 23 Sep 2012 20:27:32 +0200 Subject: hwmon: (via-cputemp) Use get_online_cpus to avoid races involving CPU hotplug via_cputemp_init loops with for_each_online_cpu, adding platform_devices, then calls register_hotcpu_notifier. If a CPU is offlined between the loop and register_hotcpu_notifier, then later onlined, via_cputemp_device_add will attempt to add platform devices with the same ID. A similar race occurs during via_cputemp_exit, after the module calls unregister_hotcpu_notifier, a CPU might offline and a device will exist for a CPU that is offline. This fix surrounds for_each_online_cpu and register_hotcpu_notifier with get_online_cpus+put_online_cpus; and surrounds unregister_hotcpu_notifier and device unregistering with get_online_cpus+put_online_cpus. Build tested. Signed-off-by: Silas Boyd-Wickizer Acked-by: Harald Welte Signed-off-by: Jean Delvare --- drivers/hwmon/via-cputemp.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c index ee4ebc198a94..2e56c6ce9fb6 100644 --- a/drivers/hwmon/via-cputemp.c +++ b/drivers/hwmon/via-cputemp.c @@ -328,6 +328,7 @@ static int __init via_cputemp_init(void) if (err) goto exit; + get_online_cpus(); for_each_online_cpu(i) { struct cpuinfo_x86 *c = &cpu_data(i); @@ -347,12 +348,14 @@ static int __init via_cputemp_init(void) #ifndef CONFIG_HOTPLUG_CPU if (list_empty(&pdev_list)) { + put_online_cpus(); err = -ENODEV; goto exit_driver_unreg; } #endif register_hotcpu_notifier(&via_cputemp_cpu_notifier); + put_online_cpus(); return 0; #ifndef CONFIG_HOTPLUG_CPU @@ -367,6 +370,7 @@ static void __exit via_cputemp_exit(void) { struct pdev_entry *p, *n; + get_online_cpus(); unregister_hotcpu_notifier(&via_cputemp_cpu_notifier); mutex_lock(&pdev_list_mutex); list_for_each_entry_safe(p, n, &pdev_list, list) { @@ -375,6 +379,7 @@ static void __exit via_cputemp_exit(void) kfree(p); } mutex_unlock(&pdev_list_mutex); + put_online_cpus(); platform_driver_unregister(&via_cputemp_driver); } -- cgit v1.2.3 From 641f14560035bbb86500ea4b3a27ad27f034725b Mon Sep 17 00:00:00 2001 From: Silas Boyd-Wickizer Date: Sun, 23 Sep 2012 20:27:32 +0200 Subject: hwmon: (coretemp) Use get_online_cpus to avoid races involving CPU hotplug coretemp_init loops with for_each_online_cpu, adding platform_devices and sysfs interfaces, then calls register_hotcpu_notifier. There is a race if a CPU is offlined or onlined after the loop, but before register_hotcpu_notifier. The race might result in the absence of a platform_device+sysfs interface for an online CPU, or the presence of a platform_device+sysfs interface for an offline CPU. A similar race occurs during coretemp_exit, after the module calls unregister_hotcpu_notifier, but before it unregisters all devices, a CPU might offline and a device for an offline CPU will exist for a short while. This fix surrounds for_each_online_cpu and register_hotcpu_notifier with get_online_cpus+put_online_cpus; and surrounds unregister_hotcpu_notifier and device unregistering with get_online_cpus+put_online_cpus. Build tested. Signed-off-by: Silas Boyd-Wickizer Signed-off-by: Jean Delvare --- drivers/hwmon/coretemp.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 0fa356fe82cc..984a3f13923b 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -815,17 +815,20 @@ static int __init coretemp_init(void) if (err) goto exit; + get_online_cpus(); for_each_online_cpu(i) get_core_online(i); #ifndef CONFIG_HOTPLUG_CPU if (list_empty(&pdev_list)) { + put_online_cpus(); err = -ENODEV; goto exit_driver_unreg; } #endif register_hotcpu_notifier(&coretemp_cpu_notifier); + put_online_cpus(); return 0; #ifndef CONFIG_HOTPLUG_CPU @@ -840,6 +843,7 @@ static void __exit coretemp_exit(void) { struct pdev_entry *p, *n; + get_online_cpus(); unregister_hotcpu_notifier(&coretemp_cpu_notifier); mutex_lock(&pdev_list_mutex); list_for_each_entry_safe(p, n, &pdev_list, list) { @@ -848,6 +852,7 @@ static void __exit coretemp_exit(void) kfree(p); } mutex_unlock(&pdev_list_mutex); + put_online_cpus(); platform_driver_unregister(&coretemp_driver); } -- cgit v1.2.3 From 5f0ecb907deb1e6f28071ee3bd568903b9da1be4 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Sun, 23 Sep 2012 20:27:32 +0200 Subject: hwmon: (fam15h_power) Tweak runavg_range on resume The quirk introduced with commit 00250ec90963b7ef6678438888f3244985ecde14 (hwmon: fam15h_power: fix bogus values with current BIOSes) is not only required during driver load but also when system resumes from suspend. The BIOS might set the previously recommended (but unsuitable) initilization value for the running average range register during resume. Signed-off-by: Andreas Herrmann Tested-by: Andreas Hartmann Signed-off-by: Jean Delvare Cc: stable@vger.kernel.org # 3.0+ --- drivers/hwmon/fam15h_power.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index 2764b78a784b..af69073b3fe8 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -129,12 +129,12 @@ static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4) * counter saturations resulting in bogus power readings. * We correct this value ourselves to cope with older BIOSes. */ -static DEFINE_PCI_DEVICE_TABLE(affected_device) = { +static const struct pci_device_id affected_device[] = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, { 0 } }; -static void __devinit tweak_runavg_range(struct pci_dev *pdev) +static void tweak_runavg_range(struct pci_dev *pdev) { u32 val; @@ -158,6 +158,16 @@ static void __devinit tweak_runavg_range(struct pci_dev *pdev) REG_TDP_RUNNING_AVERAGE, val); } +#ifdef CONFIG_PM +static int fam15h_power_resume(struct pci_dev *pdev) +{ + tweak_runavg_range(pdev); + return 0; +} +#else +#define fam15h_power_resume NULL +#endif + static void __devinit fam15h_power_init_data(struct pci_dev *f4, struct fam15h_power_data *data) { @@ -256,6 +266,7 @@ static struct pci_driver fam15h_power_driver = { .id_table = fam15h_power_id_table, .probe = fam15h_power_probe, .remove = __devexit_p(fam15h_power_remove), + .resume = fam15h_power_resume, }; module_pci_driver(fam15h_power_driver); -- cgit v1.2.3 From 40a3eb33e307616567f4b81792f405a7f3f0abee Mon Sep 17 00:00:00 2001 From: Def Date: Thu, 20 Sep 2012 14:56:13 +0200 Subject: batman-adv: Fix change mac address of soft iface. Into function interface_set_mac_addr, the function tt_local_add was invoked before updating dev->dev_addr. The new MAC address was not tagged as NoPurge. Signed-off-by: Def --- net/batman-adv/soft-interface.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 109ea2aae96c..21c53577c8d6 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -100,18 +100,21 @@ static int batadv_interface_set_mac_addr(struct net_device *dev, void *p) { struct batadv_priv *bat_priv = netdev_priv(dev); struct sockaddr *addr = p; + uint8_t old_addr[ETH_ALEN]; if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; + memcpy(old_addr, dev->dev_addr, ETH_ALEN); + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + /* only modify transtable if it has been initialized before */ if (atomic_read(&bat_priv->mesh_state) == BATADV_MESH_ACTIVE) { - batadv_tt_local_remove(bat_priv, dev->dev_addr, + batadv_tt_local_remove(bat_priv, old_addr, "mac address changed", false); batadv_tt_local_add(dev, addr->sa_data, BATADV_NULL_IFINDEX); } - memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); dev->addr_assign_type &= ~NET_ADDR_RANDOM; return 0; } -- cgit v1.2.3 From 7caf69fb9c5017df01945a1861c042f6aa08edeb Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Tue, 18 Sep 2012 03:01:08 +0200 Subject: batman-adv: Fix symmetry check / route flapping in multi interface setups If receiving an OGM from a neighbor other than the currently selected and if it has the same TQ then we are supposed to switch if this neighbor provides a more symmetric link than the currently selected one. However this symmetry check currently is broken if the interface of the neighbor we received the OGM from and the one of the currently selected neighbor differ: We are currently trying to determine the symmetry of the link towards the selected router via the link we received the OGM from instead of just checking via the link towards the currently selected router. This leads to way more route switches than necessary and can lead to permanent route flapping in many common multi interface setups. This patch fixes this issue by using the right interface for this symmetry check. Signed-off-by: Linus Lüssing --- net/batman-adv/bat_iv_ogm.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index e877af8bdd1e..469daabd90c7 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -642,7 +642,8 @@ batadv_iv_ogm_orig_update(struct batadv_priv *bat_priv, struct batadv_neigh_node *router = NULL; struct batadv_orig_node *orig_node_tmp; struct hlist_node *node; - uint8_t bcast_own_sum_orig, bcast_own_sum_neigh; + int if_num; + uint8_t sum_orig, sum_neigh; uint8_t *neigh_addr; batadv_dbg(BATADV_DBG_BATMAN, bat_priv, @@ -727,17 +728,17 @@ batadv_iv_ogm_orig_update(struct batadv_priv *bat_priv, if (router && (neigh_node->tq_avg == router->tq_avg)) { orig_node_tmp = router->orig_node; spin_lock_bh(&orig_node_tmp->ogm_cnt_lock); - bcast_own_sum_orig = - orig_node_tmp->bcast_own_sum[if_incoming->if_num]; + if_num = router->if_incoming->if_num; + sum_orig = orig_node_tmp->bcast_own_sum[if_num]; spin_unlock_bh(&orig_node_tmp->ogm_cnt_lock); orig_node_tmp = neigh_node->orig_node; spin_lock_bh(&orig_node_tmp->ogm_cnt_lock); - bcast_own_sum_neigh = - orig_node_tmp->bcast_own_sum[if_incoming->if_num]; + if_num = neigh_node->if_incoming->if_num; + sum_neigh = orig_node_tmp->bcast_own_sum[if_num]; spin_unlock_bh(&orig_node_tmp->ogm_cnt_lock); - if (bcast_own_sum_orig >= bcast_own_sum_neigh) + if (sum_orig >= sum_neigh) goto update_tt; } -- cgit v1.2.3 From ef6e7816b4546475d04b4ea22d58c48472157c70 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Sun, 23 Sep 2012 08:18:06 +0800 Subject: edac_mc: fix messy kfree calls in the error path coccinelle warns about: + drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429 421 if (mci->csrows) { > 422 for (chn = 0; chn < tot_channels; chn++) { 423 csr = mci->csrows[chn]; 424 if (csr) { > 425 for (chn = 0; chn < tot_channels; chn++) 426 kfree(csr->channels[chn]); 427 kfree(csr); 428 } > 429 kfree(mci->csrows[i]); 430 } 431 kfree(mci->csrows); 432 } and that code block seem to mess things up in several ways (double free, memory leak, out-of-bound reads etc.): L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be "row" and "tot_csrows" respectively. Which means either memory leak, or out-of-bound reads (which if does not trigger an immediate page fault error, will further lead to kfree() on random addresses). L425: The inner loop is reusing the same iterator "chn" as the outer loop, which could lead to premature end of the outer loop, and hence memory leak. L429: The array index 'i' in mci->csrows[i] is a temporary value used in previous loops, and won't change at all in the current loop. Which means either out-of-bound read and possibly kfree(random number), or the same mci->csrows[i] get freed once and again, and possibly double free for the kfree(csr) in L427. L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory. The buggy code was introduced by commit de3910eb ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1 merge window. Fix it by freeing up resources in this order: free csrows[i]->channels[j] free csrows[i]->channels free csrows[i] free csrows CC: Mauro Carvalho Chehab CC: Shaun Ruffell Signed-off-by: Fengguang Wu Signed-off-by: Linus Torvalds --- drivers/edac/edac_mc.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 616d90bcb3a4..9037ffa100d5 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -419,14 +419,16 @@ error: kfree(mci->dimms); } if (mci->csrows) { - for (chn = 0; chn < tot_channels; chn++) { - csr = mci->csrows[chn]; + for (row = 0; row < tot_csrows; row++) { + csr = mci->csrows[row]; if (csr) { - for (chn = 0; chn < tot_channels; chn++) - kfree(csr->channels[chn]); + if (csr->channels) { + for (chn = 0; chn < tot_channels; chn++) + kfree(csr->channels[chn]); + kfree(csr->channels); + } kfree(csr); } - kfree(mci->csrows[i]); } kfree(mci->csrows); } -- cgit v1.2.3 From faa2ad09c01c48012fe4c117d3256e354e0f9238 Mon Sep 17 00:00:00 2001 From: Shaun Ruffell Date: Sat, 22 Sep 2012 20:26:38 -0500 Subject: edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs. Fix potential NULL pointer dereference in edac_unregister_sysfs() on system boot introduced in 3.6-rc1. Since commit 7a623c039 ("edac: rewrite the sysfs code to use struct device") edac_mc_alloc() no longer initializes embedded kobjects in struct mem_ctl_info. Therefore edac_mc_free() can no longer simply decrement a kobject reference count to free the allocated memory unless the memory controller driver module had also called edac_mc_add_mc(). Now edac_mc_free() will check if the newly embedded struct device has been registered with sysfs before using either the standard device release functions or freeing the data structures itself with logic pulled out of the error path of edac_mc_alloc(). The BUG this patch resolves for me: BUG: unable to handle kernel NULL pointer dereference at (null) EIP is at __wake_up_common+0x1a/0x6a Process modprobe (pid: 933, ti=f3dc6000 task=f3db9520 task.ti=f3dc6000) Call Trace: complete_all+0x3f/0x50 device_pm_remove+0x23/0xa2 device_del+0x34/0x142 edac_unregister_sysfs+0x3b/0x5c [edac_core] edac_mc_free+0x29/0x2f [edac_core] e7xxx_probe1+0x268/0x311 [e7xxx_edac] e7xxx_init_one+0x56/0x61 [e7xxx_edac] local_pci_probe+0x13/0x15 ... Cc: Mauro Carvalho Chehab Cc: Shaohui Xie Signed-off-by: Shaun Ruffell Signed-off-by: Linus Torvalds --- drivers/edac/edac_mc.c | 59 +++++++++++++++++++++++++++++++++----------------- 1 file changed, 39 insertions(+), 20 deletions(-) diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 9037ffa100d5..d5dc9da7f99f 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -199,6 +199,36 @@ void *edac_align_ptr(void **p, unsigned size, int n_elems) return (void *)(((unsigned long)ptr) + align - r); } +static void _edac_mc_free(struct mem_ctl_info *mci) +{ + int i, chn, row; + struct csrow_info *csr; + const unsigned int tot_dimms = mci->tot_dimms; + const unsigned int tot_channels = mci->num_cschannel; + const unsigned int tot_csrows = mci->nr_csrows; + + if (mci->dimms) { + for (i = 0; i < tot_dimms; i++) + kfree(mci->dimms[i]); + kfree(mci->dimms); + } + if (mci->csrows) { + for (row = 0; row < tot_csrows; row++) { + csr = mci->csrows[row]; + if (csr) { + if (csr->channels) { + for (chn = 0; chn < tot_channels; chn++) + kfree(csr->channels[chn]); + kfree(csr->channels); + } + kfree(csr); + } + } + kfree(mci->csrows); + } + kfree(mci); +} + /** * edac_mc_alloc: Allocate and partially fill a struct mem_ctl_info structure * @mc_num: Memory controller number @@ -413,26 +443,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num, return mci; error: - if (mci->dimms) { - for (i = 0; i < tot_dimms; i++) - kfree(mci->dimms[i]); - kfree(mci->dimms); - } - if (mci->csrows) { - for (row = 0; row < tot_csrows; row++) { - csr = mci->csrows[row]; - if (csr) { - if (csr->channels) { - for (chn = 0; chn < tot_channels; chn++) - kfree(csr->channels[chn]); - kfree(csr->channels); - } - kfree(csr); - } - } - kfree(mci->csrows); - } - kfree(mci); + _edac_mc_free(mci); return NULL; } @@ -447,6 +458,14 @@ void edac_mc_free(struct mem_ctl_info *mci) { edac_dbg(1, "\n"); + /* If we're not yet registered with sysfs free only what was allocated + * in edac_mc_alloc(). + */ + if (!device_is_registered(&mci->dev)) { + _edac_mc_free(mci); + return; + } + /* the mci instance is freed here, when the sysfs object is dropped */ edac_unregister_sysfs(mci); } -- cgit v1.2.3 From 979570e02981d4a8fc20b3cc8fd651856c98ee9d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 23 Sep 2012 18:10:57 -0700 Subject: Linux 3.6-rc7 --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index ae6928cc59d3..a3c11d589681 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 3 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc6 -NAME = Saber-toothed Squirrel +EXTRAVERSION = -rc7 +NAME = Terrified Chipmunk # *DOCUMENTATION* # To see a list of typical targets execute "make help" -- cgit v1.2.3 From cb13ff69d6d61ab06285e3ef652f45ecda73e135 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 24 Sep 2012 16:27:20 +1000 Subject: md/raid5: add missing spin_lock_init. commit b17459c05000fdbe8d10946570a26510f86ec0f raid5: add a per-stripe lock added a spin_lock to the 'stripe_head' struct. Unfortunately there are two places where this struct is allocated but the spin lock was only initialised in one of them. So add the missing spin_lock_init. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 7031b865b3a0..0689173fd9f5 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1591,6 +1591,7 @@ static int resize_stripes(struct r5conf *conf, int newsize) #ifdef CONFIG_MULTICORE_RAID456 init_waitqueue_head(&nsh->ops.wait_for_ops); #endif + spin_lock_init(&nsh->stripe_lock); list_add(&nsh->lru, &newstripes); } -- cgit v1.2.3 From ec10665cbf271fb1f60daeb194ad4f2cdcdc59d9 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 24 Sep 2012 08:35:03 +0200 Subject: ARM: dma-mapping: Fix potential memory leak in atomic_pool_init() When either of __alloc_from_contiguous or __alloc_remap_buffer fails to provide a valid pointer, allocated memory is freed up and an error is returned. 'pages' was however not freed before returning error. Cc: Arnd Bergmann Cc: Marek Szyprowski Signed-off-by: Sachin Kamat Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index e59c4ab71bcb..13f555d62491 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -346,6 +346,8 @@ static int __init atomic_pool_init(void) (unsigned)pool->size / 1024); return 0; } + + kfree(pages); no_pages: kfree(bitmap); no_bitmap: -- cgit v1.2.3 From 8d54db795dfb1049d45dc34f0dddbc5347ec5642 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 17 Aug 2012 10:22:37 -0400 Subject: xen/boot: Disable NUMA for PV guests. The hypervisor is in charge of allocating the proper "NUMA" memory and dealing with the CPU scheduler to keep them bound to the proper NUMA node. The PV guests (and PVHVM) have no inkling of where they run and do not need to know that right now. In the future we will need to inject NUMA configuration data (if a guest spans two or more NUMA nodes) so that the kernel can make the right choices. But those patches are not yet present. In the meantime, disable the NUMA capability in the PV guest, which also fixes a bootup issue. Andre says: "we see Dom0 crashes due to the kernel detecting the NUMA topology not by ACPI, but directly from the northbridge (CONFIG_AMD_NUMA). This will detect the actual NUMA config of the physical machine, but will crash about the mismatch with Dom0's virtual memory. Variation of the theme: Dom0 sees what it's not supposed to see. This happens with the said config option enabled and on a machine where this scanning is still enabled (K8 and Fam10h, not Bulldozer class) We have this dump then: NUMA: Warning: node ids are out of bound, from=-1 to=-1 distance=10 Scanning NUMA topology in Northbridge 24 Number of physical nodes 4 Node 0 MemBase 0000000000000000 Limit 0000000040000000 Node 1 MemBase 0000000040000000 Limit 0000000138000000 Node 2 MemBase 0000000138000000 Limit 00000001f8000000 Node 3 MemBase 00000001f8000000 Limit 0000000238000000 Initmem setup node 0 0000000000000000-0000000040000000 NODE_DATA [000000003ffd9000 - 000000003fffffff] Initmem setup node 1 0000000040000000-0000000138000000 NODE_DATA [0000000137fd9000 - 0000000137ffffff] Initmem setup node 2 0000000138000000-00000001f8000000 NODE_DATA [00000001f095e000 - 00000001f0984fff] Initmem setup node 3 00000001f8000000-0000000238000000 Cannot find 159744 bytes in node 3 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] __alloc_bootmem_node+0x43/0x96 Pid: 0, comm: swapper Not tainted 3.3.6 #1 AMD Dinar/Dinar RIP: e030:[] [] __alloc_bootmem_node+0x43/0x96 .. snip.. [] sparse_early_usemaps_alloc_node+0x64/0x178 [] sparse_init+0xe4/0x25a [] paging_init+0x13/0x22 [] setup_arch+0x9c6/0xa9b [] ? printk+0x3c/0x3e [] start_kernel+0xe5/0x468 [] x86_64_start_reservations+0xba/0xc1 [] ? xen_setup_runstate_info+0x2c/0x36 [] xen_start_kernel+0x565/0x56c " so we just disable NUMA scanning by setting numa_off=1. CC: stable@vger.kernel.org Reported-and-Tested-by: Andre Przywara Acked-by: Andre Przywara Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/setup.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index d11ca11d14fc..e2d62d697b5d 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -544,4 +545,7 @@ void __init xen_arch_setup(void) disable_cpufreq(); WARN_ON(set_pm_idle_to_default()); fiddle_vdso(); +#ifdef CONFIG_NUMA + numa_off = 1; +#endif } -- cgit v1.2.3 From b02d6175859dfbdecb5ea6562867092b5d69d64e Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Fri, 21 Sep 2012 14:35:49 -0400 Subject: c6x: use asm-generic/barrier.h A recent patch in the linux-next tree caused a build failure on C6X because C6X didn't define a read_barrier_depends() macro. C6X does not support SMP and the architecture doesn't provide any special memory ordering instructions, so it makes sense to just use the generic barrier.h rather than patching the existing c6x specific header. Signed-off-by: Mark Salter --- arch/c6x/include/asm/Kbuild | 1 + arch/c6x/include/asm/barrier.h | 27 --------------------------- 2 files changed, 1 insertion(+), 27 deletions(-) delete mode 100644 arch/c6x/include/asm/barrier.h diff --git a/arch/c6x/include/asm/Kbuild b/arch/c6x/include/asm/Kbuild index 3af601e31e66..f08e89183cda 100644 --- a/arch/c6x/include/asm/Kbuild +++ b/arch/c6x/include/asm/Kbuild @@ -2,6 +2,7 @@ include include/asm-generic/Kbuild.asm generic-y += atomic.h generic-y += auxvec.h +generic-y += barrier.h generic-y += bitsperlong.h generic-y += bugs.h generic-y += cputime.h diff --git a/arch/c6x/include/asm/barrier.h b/arch/c6x/include/asm/barrier.h deleted file mode 100644 index 538240e85909..000000000000 --- a/arch/c6x/include/asm/barrier.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Port on Texas Instruments TMS320C6x architecture - * - * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated - * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASM_C6X_BARRIER_H -#define _ASM_C6X_BARRIER_H - -#define nop() asm("NOP\n"); - -#define mb() barrier() -#define rmb() barrier() -#define wmb() barrier() -#define set_mb(var, value) do { var = value; mb(); } while (0) -#define set_wmb(var, value) do { var = value; wmb(); } while (0) - -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while (0) - -#endif /* _ASM_C6X_BARRIER_H */ -- cgit v1.2.3 From e70cf54073acb6494620620af2ab993d57ae8d3f Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 24 Sep 2012 14:57:58 -0400 Subject: tile: gxio iorpc numbering change for TRIO interface An ABI numbering change was made in the hypervisor for Tilera's 4.1 MDE release (just shipped). It's incompatible with the previous 4.0 release ABI numbering, so we track the new numbering going forward. We plan to avoid modifying ABI numbering for these interfaces again. Signed-off-by: Chris Metcalf --- arch/tile/include/gxio/iorpc_trio.h | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/arch/tile/include/gxio/iorpc_trio.h b/arch/tile/include/gxio/iorpc_trio.h index 15fb77992083..58105c31228b 100644 --- a/arch/tile/include/gxio/iorpc_trio.h +++ b/arch/tile/include/gxio/iorpc_trio.h @@ -25,21 +25,23 @@ #include #include -#define GXIO_TRIO_OP_ALLOC_ASIDS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1400) +#define GXIO_TRIO_OP_DEALLOC_ASID IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1400) +#define GXIO_TRIO_OP_ALLOC_ASIDS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1401) -#define GXIO_TRIO_OP_ALLOC_MEMORY_MAPS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1402) +#define GXIO_TRIO_OP_ALLOC_MEMORY_MAPS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1404) -#define GXIO_TRIO_OP_ALLOC_PIO_REGIONS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x140e) -#define GXIO_TRIO_OP_INIT_PIO_REGION_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x140f) +#define GXIO_TRIO_OP_ALLOC_PIO_REGIONS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1412) -#define GXIO_TRIO_OP_INIT_MEMORY_MAP_MMU_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1417) -#define GXIO_TRIO_OP_GET_PORT_PROPERTY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1418) -#define GXIO_TRIO_OP_CONFIG_LEGACY_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1419) -#define GXIO_TRIO_OP_CONFIG_MSI_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x141a) +#define GXIO_TRIO_OP_INIT_PIO_REGION_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1414) -#define GXIO_TRIO_OP_SET_MPS_MRS IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141c) -#define GXIO_TRIO_OP_FORCE_RC_LINK_UP IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141d) -#define GXIO_TRIO_OP_FORCE_EP_LINK_UP IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141e) +#define GXIO_TRIO_OP_INIT_MEMORY_MAP_MMU_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141e) +#define GXIO_TRIO_OP_GET_PORT_PROPERTY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141f) +#define GXIO_TRIO_OP_CONFIG_LEGACY_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1420) +#define GXIO_TRIO_OP_CONFIG_MSI_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1421) + +#define GXIO_TRIO_OP_SET_MPS_MRS IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1423) +#define GXIO_TRIO_OP_FORCE_RC_LINK_UP IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1424) +#define GXIO_TRIO_OP_FORCE_EP_LINK_UP IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1425) #define GXIO_TRIO_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) #define GXIO_TRIO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) -- cgit v1.2.3 From 212ea99a85d30dbc834888384c57ad5abbc67a0a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 23 Sep 2012 16:58:49 +0000 Subject: phy/micrel: Implement support for KSZ8021 The KSZ8021 PHY was previously caught by KS8051, which is not correct. This PHY needs additional setup if it is strapped for address 0. In such case an reserved bit must be written in the 0x16, "Operation Mode Strap Override" register. According to the KS8051 datasheet, that bit means "PHY Address 0 in non-broadcast" and it indeed behaves as such on KSZ8021. The issue where the ethernet controller (Freescale FEC) did not communicate with network is fixed by writing this bit as 1. Signed-off-by: Marek Vasut Cc: David J. Choi Cc: David S. Miller Cc: Nobuhiro Iwamatsu Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 27 +++++++++++++++++++++++++++ include/linux/micrel_phy.h | 1 + 2 files changed, 28 insertions(+) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index cf287e0eb408..e8e00dc087f1 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -21,6 +21,12 @@ #include #include +/* Operation Mode Strap Override */ +#define MII_KSZPHY_OMSO 0x16 +#define KSZPHY_OMSO_B_CAST_OFF (1 << 9) +#define KSZPHY_OMSO_RMII_OVERRIDE (1 << 1) +#define KSZPHY_OMSO_MII_OVERRIDE (1 << 0) + /* general Interrupt control/status reg in vendor specific block. */ #define MII_KSZPHY_INTCS 0x1B #define KSZPHY_INTCS_JABBER (1 << 15) @@ -101,6 +107,13 @@ static int kszphy_config_init(struct phy_device *phydev) return 0; } +static int ksz8021_config_init(struct phy_device *phydev) +{ + const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE; + phy_write(phydev, MII_KSZPHY_OMSO, val); + return 0; +} + static int ks8051_config_init(struct phy_device *phydev) { int regval; @@ -127,6 +140,19 @@ static struct phy_driver ksphy_driver[] = { .ack_interrupt = kszphy_ack_interrupt, .config_intr = ks8737_config_intr, .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_KSZ8021, + .phy_id_mask = 0x00ffffff, + .name = "Micrel KSZ8021", + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = ksz8021_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KS8041, .phy_id_mask = 0x00fffff0, @@ -203,6 +229,7 @@ static struct mdio_device_id __maybe_unused micrel_tbl[] = { { PHY_ID_KSZ9021, 0x000ffffe }, { PHY_ID_KS8001, 0x00ffffff }, { PHY_ID_KS8737, 0x00fffff0 }, + { PHY_ID_KSZ8021, 0x00ffffff }, { PHY_ID_KS8041, 0x00fffff0 }, { PHY_ID_KS8051, 0x00fffff0 }, { } diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 61f0905bdc48..be7f366e37f0 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -5,6 +5,7 @@ #define PHY_ID_KSZ9021 0x00221610 #define PHY_ID_KS8737 0x00221720 +#define PHY_ID_KSZ8021 0x00221555 #define PHY_ID_KS8041 0x00221510 #define PHY_ID_KS8051 0x00221550 /* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */ -- cgit v1.2.3 From 510d573fefed904a136b220b259bf48d99d5e381 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 23 Sep 2012 16:58:50 +0000 Subject: phy/micrel: Rename KS80xx to KSZ80xx There is no such part as KS8001, KS8041 or KS8051. There are only KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match the Micrel naming. Signed-off-by: Marek Vasut Cc: David J. Choi Cc: David S. Miller Cc: Nobuhiro Iwamatsu Cc: Linux ARM kernel Cc: Fabio Estevam Cc: Shawn Guo Signed-off-by: David S. Miller --- arch/arm/mach-mxs/mach-mxs.c | 2 +- drivers/net/phy/micrel.c | 18 +++++++++--------- include/linux/micrel_phy.h | 6 +++--- 3 files changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 8dabfe81d07c..ff886e01a0b0 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -261,7 +261,7 @@ static void __init apx4devkit_init(void) enable_clk_enet_out(); if (IS_BUILTIN(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, + phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK, apx4devkit_phy_fixup); mxsfb_pdata.mode_list = apx4devkit_video_modes; diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index e8e00dc087f1..2165d5fdb8c0 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -154,9 +154,9 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }, { - .phy_id = PHY_ID_KS8041, + .phy_id = PHY_ID_KSZ8041, .phy_id_mask = 0x00fffff0, - .name = "Micrel KS8041", + .name = "Micrel KSZ8041", .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -167,9 +167,9 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }, { - .phy_id = PHY_ID_KS8051, + .phy_id = PHY_ID_KSZ8051, .phy_id_mask = 0x00fffff0, - .name = "Micrel KS8051", + .name = "Micrel KSZ8051", .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -180,8 +180,8 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }, { - .phy_id = PHY_ID_KS8001, - .name = "Micrel KS8001 or KS8721", + .phy_id = PHY_ID_KSZ8001, + .name = "Micrel KSZ8001 or KS8721", .phy_id_mask = 0x00ffffff, .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -227,11 +227,11 @@ MODULE_LICENSE("GPL"); static struct mdio_device_id __maybe_unused micrel_tbl[] = { { PHY_ID_KSZ9021, 0x000ffffe }, - { PHY_ID_KS8001, 0x00ffffff }, + { PHY_ID_KSZ8001, 0x00ffffff }, { PHY_ID_KS8737, 0x00fffff0 }, { PHY_ID_KSZ8021, 0x00ffffff }, - { PHY_ID_KS8041, 0x00fffff0 }, - { PHY_ID_KS8051, 0x00fffff0 }, + { PHY_ID_KSZ8041, 0x00fffff0 }, + { PHY_ID_KSZ8051, 0x00fffff0 }, { } }; diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index be7f366e37f0..d02355d1fc31 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -6,10 +6,10 @@ #define PHY_ID_KSZ9021 0x00221610 #define PHY_ID_KS8737 0x00221720 #define PHY_ID_KSZ8021 0x00221555 -#define PHY_ID_KS8041 0x00221510 -#define PHY_ID_KS8051 0x00221550 +#define PHY_ID_KSZ8041 0x00221510 +#define PHY_ID_KSZ8051 0x00221550 /* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */ -#define PHY_ID_KS8001 0x0022161A +#define PHY_ID_KSZ8001 0x0022161A /* struct phy_device dev_flags definitions */ #define MICREL_PHY_50MHZ_CLK 0x00000001 -- cgit v1.2.3 From 69190e67d4fac49e2f6ea22f46780d0c712214b8 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 23 Sep 2012 16:58:51 +0000 Subject: phy/micrel: Add missing header to micrel_phy.h The license header was missing in micrel_phy.h . This patch adds one. Signed-off-by: Marek Vasut Cc: David J. Choi Cc: David S. Miller Cc: Nobuhiro Iwamatsu Signed-off-by: David S. Miller --- include/linux/micrel_phy.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index d02355d1fc31..de201203bc7c 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -1,3 +1,15 @@ +/* + * include/linux/micrel_phy.h + * + * Micrel PHY IDs + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + #ifndef _MICREL_PHY_H #define _MICREL_PHY_H -- cgit v1.2.3 From b1268d3737c6316016026245eef276eda6b0a621 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Thu, 20 Sep 2012 10:48:03 +0200 Subject: gpio-lpc32xx: Fix value handling of gpio_direction_output() For GPIOs of gpio-lpc32xx, gpio_direction_output() ignores the value argument (initial value of output). This patch fixes this by setting the level accordingly. Cc: stable@kernel.org Signed-off-by: Roland Stigge Acked-by: Alexandre Pereira da Silva Signed-off-by: Linus Walleij --- drivers/gpio/gpio-lpc32xx.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c index 8a420f13905e..ed94b4ea72e9 100644 --- a/drivers/gpio/gpio-lpc32xx.c +++ b/drivers/gpio/gpio-lpc32xx.c @@ -308,6 +308,7 @@ static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin, { struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + __set_gpio_level_p012(group, pin, value); __set_gpio_dir_p012(group, pin, 0); return 0; @@ -318,6 +319,7 @@ static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin, { struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + __set_gpio_level_p3(group, pin, value); __set_gpio_dir_p3(group, pin, 0); return 0; @@ -326,6 +328,9 @@ static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin, static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin, int value) { + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + __set_gpo_level_p3(group, pin, value); return 0; } -- cgit v1.2.3 From 3e10986d1d698140747fcfc2761ec9cb64c1d582 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 24 Sep 2012 07:00:11 +0000 Subject: net: guard tcp_set_keepalive() to tcp sockets Its possible to use RAW sockets to get a crash in tcp_set_keepalive() / sk_reset_timer() Fix is to make sure socket is a SOCK_STREAM one. Reported-by: Dave Jones Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/sock.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/sock.c b/net/core/sock.c index 305792076121..a6000fbad294 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -691,7 +691,8 @@ set_rcvbuf: case SO_KEEPALIVE: #ifdef CONFIG_INET - if (sk->sk_protocol == IPPROTO_TCP) + if (sk->sk_protocol == IPPROTO_TCP && + sk->sk_type == SOCK_STREAM) tcp_set_keepalive(sk, valbool); #endif sock_valbool_flag(sk, SOCK_KEEPOPEN, valbool); -- cgit v1.2.3 From 16d74ebeb1b056dfc80e69b44cc3a26515db1925 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 25 Sep 2012 11:51:05 +0900 Subject: sh: pfc: Fix up GPIO mux type reconfig case. Some drivers need to switch pin states between GPIO and pin function at runtime, which was inadvertently broken in the pinctrl driver for GPIOs being bound to a specific direction. This fixes up the request path to ensure that previously configured GPIOs don't cause us to inadvertently error out with an unsupported mux on reconfig, which in practice is primarily aimed at trapping pull-up/down users that have yet to be implemented under the new API. Fixes up regressions in the TPU PWM driver, amongst others. Reported-by: Laurent Pinchart Tested-by: Laurent Pinchart Signed-off-by: Paul Mundt --- drivers/sh/pfc/pinctrl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/sh/pfc/pinctrl.c b/drivers/sh/pfc/pinctrl.c index a3ac39b79192..0646bf6e7889 100644 --- a/drivers/sh/pfc/pinctrl.c +++ b/drivers/sh/pfc/pinctrl.c @@ -208,6 +208,8 @@ static int sh_pfc_gpio_request_enable(struct pinctrl_dev *pctldev, break; case PINMUX_TYPE_GPIO: + case PINMUX_TYPE_INPUT: + case PINMUX_TYPE_OUTPUT: break; default: pr_err("Unsupported mux type (%d), bailing...\n", pinmux_type); -- cgit v1.2.3 From 582a899622f19005126d2858f08ee0c9dac34870 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 2 Aug 2012 17:58:23 -0300 Subject: i3200_edac: Fix memory rank size commit a895bf8b1e1ea4c032a8fa8a09475a2ce09fe77a incorrectly changed the logic that fills the memory bank size. Fix it. Signed-off-by: Mauro Carvalho Chehab --- drivers/edac/i3200_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/i3200_edac.c b/drivers/edac/i3200_edac.c index 47180a08edad..b6653a6fc5d5 100644 --- a/drivers/edac/i3200_edac.c +++ b/drivers/edac/i3200_edac.c @@ -391,7 +391,7 @@ static int i3200_probe1(struct pci_dev *pdev, int dev_idx) for (j = 0; j < nr_channels; j++) { struct dimm_info *dimm = csrow->channels[j]->dimm; - dimm->nr_pages = nr_pages / nr_channels; + dimm->nr_pages = nr_pages; dimm->grain = nr_pages << PAGE_SHIFT; dimm->mtype = MEM_DDR2; dimm->dtype = DEV_UNKNOWN; -- cgit v1.2.3 From b70f833377fc80d7446218b36206e2e299fc6bfd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Sep 2012 13:25:50 -0300 Subject: i5000: Fix the memory size calculation with 2R memories When 2R memories are found, the memory size should be multiplied by two, otherwise, it will report half of the memory size: +-----------------------------------------------+ | mc0 | | branch0 | branch1 | | channel0 | channel1 | channel0 | channel1 | -------+-----------------------------------------------+ slot3: | 0 MB | 0 MB | 0 MB | 0 MB | slot2: | 0 MB | 0 MB | 0 MB | 0 MB | -------+-----------------------------------------------+ slot1: | 0 MB | 0 MB | 0 MB | 0 MB | slot0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB | -------+-----------------------------------------------+ (the above machine have 4 x 2GB 2R memories) Signed-off-by: Mauro Carvalho Chehab --- drivers/edac/i5000_edac.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index 39c63757c2a1..6a49dd00b81b 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1012,6 +1012,10 @@ static void handle_channel(struct i5000_pvt *pvt, int slot, int channel, /* add the number of COLUMN bits */ addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); + /* Dual-rank memories have twice the size */ + if (dinfo->dual_rank) + addrBits++; + addrBits += 6; /* add 64 bits per DIMM */ addrBits -= 20; /* divide by 2^^20 */ addrBits -= 3; /* 8 bits per bytes */ -- cgit v1.2.3 From deb09ddaff1435f72dd598d38f9b58354c68a5ec Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 20 Sep 2012 12:09:30 -0300 Subject: sb_edac: Avoid overflow errors at memory size calculation Sandy bridge EDAC is calculating the memory size with overflow. Basically, the size field and the integer calculation is using 32 bits. More bits are needed, when the DIMM memories have high density. The net result is that memories are improperly reported there, when high-density DIMMs are used: EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 As the number of pages value is handled at the EDAC core as unsigned ints, the driver shows the 16 GB memories at sysfs interface as 16760832 MB! The fix is simple: calculate the number of pages as unsigned 64-bits integer. After the patch, the memory size (16 GB) is properly detected: EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/edac/sb_edac.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index f3b1f9fafa4b..5715b7c2c517 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -513,7 +513,8 @@ static int get_dimm_config(struct mem_ctl_info *mci) { struct sbridge_pvt *pvt = mci->pvt_info; struct dimm_info *dimm; - int i, j, banks, ranks, rows, cols, size, npages; + unsigned i, j, banks, ranks, rows, cols, npages; + u64 size; u32 reg; enum edac_type mode; enum mem_type mtype; @@ -585,10 +586,10 @@ static int get_dimm_config(struct mem_ctl_info *mci) cols = numcol(mtr); /* DDR3 has 8 I/O banks */ - size = (rows * cols * banks * ranks) >> (20 - 3); + size = ((u64)rows * cols * banks * ranks) >> (20 - 3); npages = MiB_TO_PAGES(size); - edac_dbg(0, "mc#%d: channel %d, dimm %d, %d Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n", + edac_dbg(0, "mc#%d: channel %d, dimm %d, %Ld Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n", pvt->sbridge_dev->mc, i, j, size, npages, banks, ranks, rows, cols); -- cgit v1.2.3 From a140b98dcd9843f2e21091f2b64f10905150be16 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 24 Sep 2012 17:17:30 -0700 Subject: pwm-backlight: take over maintenance Since the pwm-backlight driver is lacking a proper maintainer and is the heaviest user of the PWM framework I'm taking over maintenance. Signed-off-by: Thierry Reding Acked-by: Arun Murthy Cc: Matthew Garrett Cc: Robert Morell Cc: Dilan Lee Cc: Axel Lin Cc: Mark Brown Cc: Alexandre Courbot Acked-by: Sachin Kamat Acked-by: Linus Walleij Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index b17587d9412f..1796fa3a1bc1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5544,6 +5544,8 @@ F: Documentation/devicetree/bindings/pwm/ F: include/linux/pwm.h F: include/linux/of_pwm.h F: drivers/pwm/ +F: drivers/video/backlight/pwm_bl.c +F: include/linux/pwm_backlight.h PXA2xx/PXA3xx SUPPORT M: Eric Miao -- cgit v1.2.3 From 0e75898fe2499ece0ac3f1475982a828b3283b0d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 24 Sep 2012 17:17:33 -0700 Subject: checksyscalls: fix "here document" handling "echo" doesn't read from stdin, therefore the checksyscalls script didn't warn about not implemented system calls anymore since 29dc54c6 ("checksyscalls: Use arch/x86/syscalls/syscall_32.tbl as source"). Use "cat" instead of "echo" which handles this correctly. Signed-off-by: Heiko Carstens Cc: Michal Marek Cc: H. Peter Anvin Cc: Cyrill Gorcunov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checksyscalls.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/checksyscalls.sh b/scripts/checksyscalls.sh index d24810fc6af6..fd8fa9aa7c4e 100755 --- a/scripts/checksyscalls.sh +++ b/scripts/checksyscalls.sh @@ -200,7 +200,7 @@ EOF syscall_list() { grep '^[0-9]' "$1" | sort -n | ( while read nr abi name entry ; do - echo < Reported-by: Borislav Petkov Reported-by: Srivatsa S. Bhat Cc: Wu Fengguang Cc: Peter Zijlstra Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/flex_proportions.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/flex_proportions.c b/lib/flex_proportions.c index c785554f9523..ebf3bac460b0 100644 --- a/lib/flex_proportions.c +++ b/lib/flex_proportions.c @@ -62,7 +62,7 @@ void fprop_global_destroy(struct fprop_global *p) */ bool fprop_new_period(struct fprop_global *p, int periods) { - u64 events; + s64 events; unsigned long flags; local_irq_save(flags); -- cgit v1.2.3 From be8cfc4af15cf611dfeb66a1fb5df43d5f1e280a Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Mon, 24 Sep 2012 17:17:38 -0700 Subject: c/r: prctl: fix build error for no-MMU case Commit 1ad75b9e1628 ("c/r: prctl: add minimal address test to PR_SET_MM") added some address checking to prctl_set_mm() used by checkpoint-restore. This causes a build error for no-MMU systems: kernel/sys.c: In function 'prctl_set_mm': kernel/sys.c:1868:34: error: 'mmap_min_addr' undeclared (first use in this function) The test for mmap_min_addr doesn't make a lot of sense for no-MMU code as noted in commit 6e1415467614 ("NOMMU: Optimise away the {dac_,}mmap_min_addr tests"). This patch defines mmap_min_addr as 0UL in the no-MMU case so that the compiler will optimize away tests for "addr < mmap_min_addr". Signed-off-by: Mark Salter Reviewed-by: Cyrill Gorcunov Cc: [3.6.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/security.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/security.h b/include/linux/security.h index 3dea6a9d568f..d143b8e01954 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -118,6 +118,7 @@ void reset_security_ops(void); extern unsigned long mmap_min_addr; extern unsigned long dac_mmap_min_addr; #else +#define mmap_min_addr 0UL #define dac_mmap_min_addr 0UL #endif -- cgit v1.2.3 From 1b05c4b50edbddbdde715c4a7350629819f6655e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 25 Sep 2012 07:03:40 +0000 Subject: ipv6: raw: fix icmpv6_filter() icmpv6_filter() should not modify its input, or else its caller would need to recompute ipv6_hdr() if skb->head is reallocated. Use skb_header_pointer() instead of pskb_may_pull() and change the prototype to make clear both sk and skb are const. Also, if icmpv6 header cannot be found, do not deliver the packet, as we do in IPv4. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/raw.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index ef0579d5bca6..4a5f78b50495 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -107,21 +107,20 @@ found: * 0 - deliver * 1 - block */ -static __inline__ int icmpv6_filter(struct sock *sk, struct sk_buff *skb) +static int icmpv6_filter(const struct sock *sk, const struct sk_buff *skb) { - struct icmp6hdr *icmph; - struct raw6_sock *rp = raw6_sk(sk); - - if (pskb_may_pull(skb, sizeof(struct icmp6hdr))) { - __u32 *data = &rp->filter.data[0]; - int bit_nr; + struct icmp6hdr *_hdr; + const struct icmp6hdr *hdr; - icmph = (struct icmp6hdr *) skb->data; - bit_nr = icmph->icmp6_type; + hdr = skb_header_pointer(skb, skb_transport_offset(skb), + sizeof(_hdr), &_hdr); + if (hdr) { + const __u32 *data = &raw6_sk(sk)->filter.data[0]; + unsigned int type = hdr->icmp6_type; - return (data[bit_nr >> 5] & (1 << (bit_nr & 31))) != 0; + return (data[type >> 5] & (1U << (type & 31))) != 0; } - return 0; + return 1; } #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) -- cgit v1.2.3 From 96af69ea2a83d292238bdba20e4508ee967cf8cb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 25 Sep 2012 22:01:28 +0200 Subject: ipv6: mip6: fix mip6_mh_filter() mip6_mh_filter() should not modify its input, or else its caller would need to recompute ipv6_hdr() if skb->head is reallocated. Use skb_header_pointer() instead of pskb_may_pull() Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/mip6.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c index 5b087c31d87b..0f9bdc5ee9f3 100644 --- a/net/ipv6/mip6.c +++ b/net/ipv6/mip6.c @@ -86,28 +86,30 @@ static int mip6_mh_len(int type) static int mip6_mh_filter(struct sock *sk, struct sk_buff *skb) { - struct ip6_mh *mh; + struct ip6_mh _hdr; + const struct ip6_mh *mh; - if (!pskb_may_pull(skb, (skb_transport_offset(skb)) + 8) || - !pskb_may_pull(skb, (skb_transport_offset(skb) + - ((skb_transport_header(skb)[1] + 1) << 3)))) + mh = skb_header_pointer(skb, skb_transport_offset(skb), + sizeof(_hdr), &_hdr); + if (!mh) return -1; - mh = (struct ip6_mh *)skb_transport_header(skb); + if (((mh->ip6mh_hdrlen + 1) << 3) > skb->len) + return -1; if (mh->ip6mh_hdrlen < mip6_mh_len(mh->ip6mh_type)) { LIMIT_NETDEBUG(KERN_DEBUG "mip6: MH message too short: %d vs >=%d\n", mh->ip6mh_hdrlen, mip6_mh_len(mh->ip6mh_type)); - mip6_param_prob(skb, 0, ((&mh->ip6mh_hdrlen) - - skb_network_header(skb))); + mip6_param_prob(skb, 0, offsetof(struct ip6_mh, ip6mh_hdrlen) + + skb_network_header_len(skb)); return -1; } if (mh->ip6mh_proto != IPPROTO_NONE) { LIMIT_NETDEBUG(KERN_DEBUG "mip6: MH invalid payload proto = %d\n", mh->ip6mh_proto); - mip6_param_prob(skb, 0, ((&mh->ip6mh_proto) - - skb_network_header(skb))); + mip6_param_prob(skb, 0, offsetof(struct ip6_mh, ip6mh_proto) + + skb_network_header_len(skb)); return -1; } -- cgit v1.2.3 From 82e6bfe2fbc4d48852114c4f979137cd5bf1d1a8 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 21 Sep 2012 22:26:52 +0000 Subject: netfilter: xt_limit: have r->cost != 0 case work Commit v2.6.19-rc1~1272^2~41 tells us that r->cost != 0 can happen when a running state is saved to userspace and then reinstated from there. Make sure that private xt_limit area is initialized with correct values. Otherwise, random matchings due to use of uninitialized memory. Signed-off-by: Jan Engelhardt Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_limit.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/netfilter/xt_limit.c b/net/netfilter/xt_limit.c index 5c22ce8ab309..a4c1e4528cac 100644 --- a/net/netfilter/xt_limit.c +++ b/net/netfilter/xt_limit.c @@ -117,11 +117,11 @@ static int limit_mt_check(const struct xt_mtchk_param *par) /* For SMP, we only want to use one set of state. */ r->master = priv; + /* User avg in seconds * XT_LIMIT_SCALE: convert to jiffies * + 128. */ + priv->prev = jiffies; + priv->credit = user2credits(r->avg * r->burst); /* Credits full. */ if (r->cost == 0) { - /* User avg in seconds * XT_LIMIT_SCALE: convert to jiffies * - 128. */ - priv->prev = jiffies; - priv->credit = user2credits(r->avg * r->burst); /* Credits full. */ r->credit_cap = priv->credit; /* Credits full. */ r->cost = user2credits(r->avg); } -- cgit v1.2.3 From c7ead11d0b498984169871fd03c57441862ec3f3 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 26 Sep 2012 12:41:19 +1000 Subject: drm/nouveau: silence a debug message triggered by newer userspace Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_abi16.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_abi16.c b/drivers/gpu/drm/nouveau/nouveau_abi16.c index ff23d88880e5..3ca240b4413d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_abi16.c +++ b/drivers/gpu/drm/nouveau/nouveau_abi16.c @@ -179,7 +179,7 @@ nouveau_abi16_ioctl_grobj_alloc(ABI16_IOCTL_ARGS) return 0; } else if (init->class == 0x906e) { - NV_ERROR(dev, "906e not supported yet\n"); + NV_DEBUG(dev, "906e not supported yet\n"); return -EINVAL; } -- cgit v1.2.3 From 79eee7aa0d4de5a42331c63d3c7c735248b53d0c Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 26 Sep 2012 12:43:10 +1000 Subject: drm/nvc0/ltcg: mask off intr 0x10 NVIDIA do that at startup too on Fermi, so perhaps the heap of 0x10 intrs we receive are normal and we can ignore them. On Kepler NVIDIA *don't* do this, but the hardware appears to come up with the bit masked off by default - so that's probably why :) This should silence some interrupt spam seen on Fermi+ boards. Backported patch from reworked nouveau kernel tree. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_fb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/nouveau/nvc0_fb.c b/drivers/gpu/drm/nouveau/nvc0_fb.c index f704e942372e..f376c39310df 100644 --- a/drivers/gpu/drm/nouveau/nvc0_fb.c +++ b/drivers/gpu/drm/nouveau/nvc0_fb.c @@ -124,6 +124,7 @@ nvc0_fb_init(struct drm_device *dev) priv = dev_priv->engine.fb.priv; nv_wr32(dev, 0x100c10, priv->r100c10 >> 8); + nv_mask(dev, 0x17e820, 0x00100000, 0x00000000); /* NV_PLTCG_INTR_EN */ return 0; } -- cgit v1.2.3 From 68c4fce737c4b963e336435f225621dc21138397 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 23 Sep 2012 19:33:55 +0300 Subject: vmwgfx: corruption in vmw_event_fence_action_create() We don't allocate enough data for this struct. As soon as we start modifying event->event on the next lines, then we're going beyond the end of the memory we allocated. Signed-off-by: Dan Carpenter cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_fence.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c index f2fb8f15e2f1..7e0743358dff 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c @@ -1018,7 +1018,7 @@ int vmw_event_fence_action_create(struct drm_file *file_priv, } - event = kzalloc(sizeof(event->event), GFP_KERNEL); + event = kzalloc(sizeof(*event), GFP_KERNEL); if (unlikely(event == NULL)) { DRM_ERROR("Failed to allocate an event.\n"); ret = -ENOMEM; -- cgit v1.2.3 From 3a75885848996baab5276ff37ebf7295c3c753f0 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 25 Sep 2012 16:17:43 +1000 Subject: drm/udl: limit modes to the sku pixel limits. Otherwise when X starts we commonly get a black screen scanning out nothing, its wierd dpms on/off from userspace brings it back, With this on F18, multi-seat works again with my 1920x1200 monitor which is above the sku limit for the device I have. Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_connector.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/udl/udl_connector.c b/drivers/gpu/drm/udl/udl_connector.c index ba055e9ca007..8d9dc44f1f94 100644 --- a/drivers/gpu/drm/udl/udl_connector.c +++ b/drivers/gpu/drm/udl/udl_connector.c @@ -69,6 +69,13 @@ static int udl_get_modes(struct drm_connector *connector) static int udl_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct udl_device *udl = connector->dev->dev_private; + if (!udl->sku_pixel_limit) + return 0; + + if (mode->vdisplay * mode->hdisplay > udl->sku_pixel_limit) + return MODE_VIRTUAL_Y; + return 0; } -- cgit v1.2.3 From d0e12f3ff3472cbd8f52d3c0e6ee07a841787c40 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 26 Sep 2012 11:57:30 +0100 Subject: ASoC: wm2000: Correct register size Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm2000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c index 3fd5b29dc933..a3acb7a85f6a 100644 --- a/sound/soc/codecs/wm2000.c +++ b/sound/soc/codecs/wm2000.c @@ -702,7 +702,7 @@ static bool wm2000_readable_reg(struct device *dev, unsigned int reg) } static const struct regmap_config wm2000_regmap = { - .reg_bits = 8, + .reg_bits = 16, .val_bits = 8, .max_register = WM2000_REG_IF_CTL, -- cgit v1.2.3 From 11ef4cfac935ab45eb4c7f98d26c78ee69627909 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Mon, 24 Sep 2012 15:19:26 -0400 Subject: syscalls: add __NR_kcmp syscall to generic unistd.h Commit d97b46a64 ("syscalls, x86: add __NR_kcmp syscall" ) added a new syscall to support checkpoint restore. It is currently x86-only, but that restriction will be removed in a subsequent patch. Unfortunately, the kernel checksyscalls script had a bug which suppressed any warning to other architectures that the kcmp syscall was not implemented. A patch to checksyscalls is being tested in linux-next and other architectures are seeing warnings about kcmp being unimplemented. This patch adds __NR_kcmp to so that kcmp is wired in for architectures using the generic syscall list. Signed-off-by: Mark Salter Acked-by: Arnd Bergmann --- include/asm-generic/unistd.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h index 991ef01cd77e..3748ec92dcbc 100644 --- a/include/asm-generic/unistd.h +++ b/include/asm-generic/unistd.h @@ -691,9 +691,11 @@ __SC_COMP(__NR_process_vm_readv, sys_process_vm_readv, \ #define __NR_process_vm_writev 271 __SC_COMP(__NR_process_vm_writev, sys_process_vm_writev, \ compat_sys_process_vm_writev) +#define __NR_kcmp 272 +__SYSCALL(__NR_kcmp, sys_kcmp) #undef __NR_syscalls -#define __NR_syscalls 272 +#define __NR_syscalls 273 /* * All syscalls below here should go away really, -- cgit v1.2.3 From 7106891a5c5960782801366ac49e47aa996b662f Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Tue, 25 Sep 2012 15:24:56 -0700 Subject: MAINTAINERS: update Intel C600 SAS driver maintainers Cc: Lukasz Dorau Cc: Maciej Patelczyk Signed-off-by: Dave Jiang Signed-off-by: Linus Torvalds --- MAINTAINERS | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1796fa3a1bc1..9a6c4da3b2ff 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3552,11 +3552,12 @@ K: \b(ABS|SYN)_MT_ INTEL C600 SERIES SAS CONTROLLER DRIVER M: Intel SCU Linux support +M: Lukasz Dorau +M: Maciej Patelczyk M: Dave Jiang -M: Ed Nadolski L: linux-scsi@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git -S: Maintained +T: git git://git.code.sf.net/p/intel-sas/isci +S: Supported F: drivers/scsi/isci/ F: firmware/isci/ -- cgit v1.2.3 From 307615a26e95406c42c95916a66ba50434567e0f Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 26 Sep 2012 23:45:39 +0100 Subject: dm thin: do not set discard_zeroes_data The dm thin pool target claims to support the zeroing of discarded data areas. This turns out to be incorrect when processing discards that do not exactly cover a complete number of blocks, so the target must always set discard_zeroes_data_unsupported. The thin pool target will zero blocks when they are allocated if the skip_block_zeroing feature is not specified. The block layer may send a discard that only partly covers a block. If a thin pool block is partially discarded then there is no guarantee that the discarded data will get zeroed before it is accessed again. Due to this, thin devices cannot claim discards will always zero data. Signed-off-by: Mike Snitzer Signed-off-by: Joe Thornber Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Alasdair G Kergon --- drivers/md/dm-thin.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index af1fc3b2c2ad..d4209231069d 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -2274,6 +2274,7 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) * thin devices' discard limits consistent). */ ti->discards_supported = true; + ti->discard_zeroes_data_unsupported = true; } ti->private = pt; @@ -2745,7 +2746,6 @@ static void set_discard_limits(struct pool *pool, struct queue_limits *limits) * boundary is not sent to this target. */ limits->discard_granularity = pool->sectors_per_block << SECTOR_SHIFT; - limits->discard_zeroes_data = pool->pf.zero_new_blocks; } static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits) -- cgit v1.2.3 From 7ba10aa6fbac7158a50bec142132b04bc480bb29 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 26 Sep 2012 23:45:41 +0100 Subject: dm mpath: only retry ioctl when no paths if queue_if_no_path set When there are no paths and multipath receives an ioctl, it waits until a path becomes available. This behaviour is incorrect if the "queue_if_no_path" setting was not specified, as then the ioctl should be rejected immediately, which this patch now does. commit 35991652b ("dm mpath: allow ioctls to trigger pg init") should have checked if queue_if_no_path was configured before queueing IO. Checking for the queue_if_no_path feature, like is done in map_io(), allows the following table load to work without blocking in the multipath_ioctl retry loop: echo "0 1024 multipath 0 0 0 0" | dmsetup create mpath_nodevs Without this fix the multipath_ioctl will block with the following stack trace: blkid D 0000000000000002 0 23936 1 0x00000000 ffff8802b89e5cd8 0000000000000082 ffff8802b89e5fd8 0000000000012440 ffff8802b89e4010 0000000000012440 0000000000012440 0000000000012440 ffff8802b89e5fd8 0000000000012440 ffff88030c2aab30 ffff880325794040 Call Trace: [] schedule+0x29/0x70 [] schedule_timeout+0x182/0x2e0 [] ? lock_timer_base+0x70/0x70 [] schedule_timeout_uninterruptible+0x1e/0x20 [] msleep+0x20/0x30 [] multipath_ioctl+0x109/0x170 [dm_multipath] [] dm_blk_ioctl+0xbc/0xd0 [dm_mod] [] __blkdev_driver_ioctl+0x28/0x30 [] blkdev_ioctl+0xce/0x730 [] block_ioctl+0x3c/0x40 [] do_vfs_ioctl+0x8c/0x340 [] ? sys_newfstat+0x33/0x40 [] sys_ioctl+0xa1/0xb0 [] system_call_fastpath+0x16/0x1b Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.5+ Acked-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm-mpath.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index d8abb90a6c2f..034233eefc82 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1555,6 +1555,7 @@ static int multipath_ioctl(struct dm_target *ti, unsigned int cmd, unsigned long arg) { struct multipath *m = ti->private; + struct pgpath *pgpath; struct block_device *bdev; fmode_t mode; unsigned long flags; @@ -1570,12 +1571,14 @@ again: if (!m->current_pgpath) __choose_pgpath(m, 0); - if (m->current_pgpath) { - bdev = m->current_pgpath->path.dev->bdev; - mode = m->current_pgpath->path.dev->mode; + pgpath = m->current_pgpath; + + if (pgpath) { + bdev = pgpath->path.dev->bdev; + mode = pgpath->path.dev->mode; } - if (m->queue_io) + if ((pgpath && m->queue_io) || (!pgpath && m->queue_if_no_path)) r = -EAGAIN; else if (!bdev) r = -EIO; -- cgit v1.2.3 From ba1cbad93dd47223b1f3b8edd50dd9ef2abcb2ed Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 26 Sep 2012 23:45:42 +0100 Subject: dm: handle requests beyond end of device instead of using BUG_ON The access beyond the end of device BUG_ON that was introduced to dm_request_fn via commit 29e4013de7ad950280e4b2208 ("dm: implement REQ_FLUSH/FUA support for request-based dm") was an overly drastic (but simple) response to this situation. I have received a report that this BUG_ON was hit and now think it would be better to use dm_kill_unmapped_request() to fail the clone and original request with -EIO. map_request() will assign the valid target returned by dm_table_find_target to tio->ti. But when the target isn't valid tio->ti is never assigned (because map_request isn't called); so add a check for tio->ti != NULL to dm_done(). Reported-by: Mike Christie Signed-off-by: Mike Snitzer Signed-off-by: Jun'ichi Nomura Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Alasdair G Kergon --- drivers/md/dm.c | 56 ++++++++++++++++++++++++++++++++++++++------------------ 1 file changed, 38 insertions(+), 18 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 4e09b6ff5b49..6748e0c4df1f 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -865,10 +865,14 @@ static void dm_done(struct request *clone, int error, bool mapped) { int r = error; struct dm_rq_target_io *tio = clone->end_io_data; - dm_request_endio_fn rq_end_io = tio->ti->type->rq_end_io; + dm_request_endio_fn rq_end_io = NULL; - if (mapped && rq_end_io) - r = rq_end_io(tio->ti, clone, error, &tio->info); + if (tio->ti) { + rq_end_io = tio->ti->type->rq_end_io; + + if (mapped && rq_end_io) + r = rq_end_io(tio->ti, clone, error, &tio->info); + } if (r <= 0) /* The target wants to complete the I/O */ @@ -1588,15 +1592,6 @@ static int map_request(struct dm_target *ti, struct request *clone, int r, requeued = 0; struct dm_rq_target_io *tio = clone->end_io_data; - /* - * Hold the md reference here for the in-flight I/O. - * We can't rely on the reference count by device opener, - * because the device may be closed during the request completion - * when all bios are completed. - * See the comment in rq_completed() too. - */ - dm_get(md); - tio->ti = ti; r = ti->type->map_rq(ti, clone, &tio->info); switch (r) { @@ -1628,6 +1623,26 @@ static int map_request(struct dm_target *ti, struct request *clone, return requeued; } +static struct request *dm_start_request(struct mapped_device *md, struct request *orig) +{ + struct request *clone; + + blk_start_request(orig); + clone = orig->special; + atomic_inc(&md->pending[rq_data_dir(clone)]); + + /* + * Hold the md reference here for the in-flight I/O. + * We can't rely on the reference count by device opener, + * because the device may be closed during the request completion + * when all bios are completed. + * See the comment in rq_completed() too. + */ + dm_get(md); + + return clone; +} + /* * q->request_fn for request-based dm. * Called with the queue lock held. @@ -1657,14 +1672,21 @@ static void dm_request_fn(struct request_queue *q) pos = blk_rq_pos(rq); ti = dm_table_find_target(map, pos); - BUG_ON(!dm_target_is_valid(ti)); + if (!dm_target_is_valid(ti)) { + /* + * Must perform setup, that dm_done() requires, + * before calling dm_kill_unmapped_request + */ + DMERR_LIMIT("request attempted access beyond the end of device"); + clone = dm_start_request(md, rq); + dm_kill_unmapped_request(clone, -EIO); + continue; + } if (ti->type->busy && ti->type->busy(ti)) goto delay_and_out; - blk_start_request(rq); - clone = rq->special; - atomic_inc(&md->pending[rq_data_dir(clone)]); + clone = dm_start_request(md, rq); spin_unlock(q->queue_lock); if (map_request(ti, clone, md)) @@ -1684,8 +1706,6 @@ delay_and_out: blk_delay_queue(q, HZ / 10); out: dm_table_put(map); - - return; } int dm_underlying_device_busy(struct request_queue *q) -- cgit v1.2.3 From c3c4555edd10dbc0b388a0125b9c50de5e79af05 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Wed, 26 Sep 2012 23:45:43 +0100 Subject: dm table: clear add_random unless all devices have it set Always clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not have it set. Otherwise devices with predictable characteristics may contribute entropy. QUEUE_FLAG_ADD_RANDOM specifies whether or not queue IO timings contribute to the random pool. For bio-based targets this flag is always 0 because such devices have no real queue. For request-based devices this flag was always set to 1 by default. Now set it according to the flags on underlying devices. If there is at least one device which should not contribute, set the flag to zero: If a device, such as fast SSD storage, is not suitable for supplying entropy, a request-based queue stacked over it will not be either. Because the checking logic is exactly same as for the rotational flag, share the iteration function with device_is_nonrot(). Signed-off-by: Milan Broz Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon --- drivers/md/dm-table.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index f90069029aae..77b90ae66991 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -1354,17 +1354,25 @@ static int device_is_nonrot(struct dm_target *ti, struct dm_dev *dev, return q && blk_queue_nonrot(q); } -static bool dm_table_is_nonrot(struct dm_table *t) +static int device_is_not_random(struct dm_target *ti, struct dm_dev *dev, + sector_t start, sector_t len, void *data) +{ + struct request_queue *q = bdev_get_queue(dev->bdev); + + return q && !blk_queue_add_random(q); +} + +static bool dm_table_all_devices_attribute(struct dm_table *t, + iterate_devices_callout_fn func) { struct dm_target *ti; unsigned i = 0; - /* Ensure that all underlying device are non-rotational. */ while (i < dm_table_get_num_targets(t)) { ti = dm_table_get_target(t, i++); if (!ti->type->iterate_devices || - !ti->type->iterate_devices(ti, device_is_nonrot, NULL)) + !ti->type->iterate_devices(ti, func, NULL)) return 0; } @@ -1396,13 +1404,23 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, if (!dm_table_discard_zeroes_data(t)) q->limits.discard_zeroes_data = 0; - if (dm_table_is_nonrot(t)) + /* Ensure that all underlying devices are non-rotational. */ + if (dm_table_all_devices_attribute(t, device_is_nonrot)) queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q); else queue_flag_clear_unlocked(QUEUE_FLAG_NONROT, q); dm_table_set_integrity(t); + /* + * Determine whether or not this queue's I/O timings contribute + * to the entropy pool, Only request-based targets use this. + * Clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not + * have it set. + */ + if (blk_queue_add_random(q) && dm_table_all_devices_attribute(t, device_is_not_random)) + queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q); + /* * QUEUE_FLAG_STACKABLE must be set after all queue settings are * visible to other CPUs because, once the flag is set, incoming bios -- cgit v1.2.3 From 3ae706561637331aa578e52bb89ecbba5edcb7a9 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 26 Sep 2012 23:45:45 +0100 Subject: dm: retain table limits when swapping to new table with no devices Add a safety net that will re-use the DM device's existing limits in the event that DM device has a temporary table that doesn't have any component devices. This is to reduce the chance that requests not respecting the hardware limits will reach the device. DM recalculates queue limits based only on devices which currently exist in the table. This creates a problem in the event all devices are temporarily removed such as all paths being lost in multipath. DM will reset the limits to the maximum permissible, which can then assemble requests which exceed the limits of the paths when the paths are restored. The request will fail the blk_rq_check_limits() test when sent to a path with lower limits, and will be retried without end by multipath. This became a much bigger issue after v3.6 commit fe86cdcef ("block: do not artificially constrain max_sectors for stacking drivers"). Reported-by: David Jeffery Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-table.c | 35 +++++++++++++++++++++++++++++++++++ drivers/md/dm.c | 15 ++++++++++++++- drivers/md/dm.h | 1 + 3 files changed, 50 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 77b90ae66991..100368eb7991 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -1212,6 +1212,41 @@ struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector) return &t->targets[(KEYS_PER_NODE * n) + k]; } +static int count_device(struct dm_target *ti, struct dm_dev *dev, + sector_t start, sector_t len, void *data) +{ + unsigned *num_devices = data; + + (*num_devices)++; + + return 0; +} + +/* + * Check whether a table has no data devices attached using each + * target's iterate_devices method. + * Returns false if the result is unknown because a target doesn't + * support iterate_devices. + */ +bool dm_table_has_no_data_devices(struct dm_table *table) +{ + struct dm_target *uninitialized_var(ti); + unsigned i = 0, num_devices = 0; + + while (i < dm_table_get_num_targets(table)) { + ti = dm_table_get_target(table, i++); + + if (!ti->type->iterate_devices) + return false; + + ti->type->iterate_devices(ti, count_device, &num_devices); + if (num_devices) + return false; + } + + return true; +} + /* * Establish the new table's queue_limits and validate them. */ diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 6748e0c4df1f..67ffa391edcf 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -2429,7 +2429,7 @@ static void dm_queue_flush(struct mapped_device *md) */ struct dm_table *dm_swap_table(struct mapped_device *md, struct dm_table *table) { - struct dm_table *map = ERR_PTR(-EINVAL); + struct dm_table *live_map, *map = ERR_PTR(-EINVAL); struct queue_limits limits; int r; @@ -2439,6 +2439,19 @@ struct dm_table *dm_swap_table(struct mapped_device *md, struct dm_table *table) if (!dm_suspended_md(md)) goto out; + /* + * If the new table has no data devices, retain the existing limits. + * This helps multipath with queue_if_no_path if all paths disappear, + * then new I/O is queued based on these limits, and then some paths + * reappear. + */ + if (dm_table_has_no_data_devices(table)) { + live_map = dm_get_live_table(md); + if (live_map) + limits = md->queue->limits; + dm_table_put(live_map); + } + r = dm_calculate_queue_limits(table, &limits); if (r) { map = ERR_PTR(r); diff --git a/drivers/md/dm.h b/drivers/md/dm.h index 52eef493d266..6a99fefaa743 100644 --- a/drivers/md/dm.h +++ b/drivers/md/dm.h @@ -54,6 +54,7 @@ void dm_table_event_callback(struct dm_table *t, void (*fn)(void *), void *context); struct dm_target *dm_table_get_target(struct dm_table *t, unsigned int index); struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector); +bool dm_table_has_no_data_devices(struct dm_table *table); int dm_calculate_queue_limits(struct dm_table *table, struct queue_limits *limits); void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, -- cgit v1.2.3 From 9bc142dd755d360c08a91ecb107d218787a2e9db Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 26 Sep 2012 23:45:46 +0100 Subject: dm thin: tidy discard support A little thin discard code refactoring to make the next patch (dm thin: fix discard support for data devices) more readable. Pull out a couple of functions (and uses bools instead of unsigned for features). No functional changes. Signed-off-by: Mike Snitzer Signed-off-by: Joe Thornber Signed-off-by: Alasdair G Kergon --- drivers/md/dm-thin.c | 64 ++++++++++++++++++++++++++++++++-------------------- 1 file changed, 39 insertions(+), 25 deletions(-) diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index d4209231069d..e99f4134dbd7 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -509,9 +509,9 @@ enum pool_mode { struct pool_features { enum pool_mode mode; - unsigned zero_new_blocks:1; - unsigned discard_enabled:1; - unsigned discard_passdown:1; + bool zero_new_blocks:1; + bool discard_enabled:1; + bool discard_passdown:1; }; struct thin_c; @@ -1839,6 +1839,32 @@ static void __requeue_bios(struct pool *pool) /*---------------------------------------------------------------- * Binding of control targets to a pool object *--------------------------------------------------------------*/ +static bool data_dev_supports_discard(struct pool_c *pt) +{ + struct request_queue *q = bdev_get_queue(pt->data_dev->bdev); + + return q && blk_queue_discard(q); +} + +/* + * If discard_passdown was enabled verify that the data device + * supports discards. Disable discard_passdown if not; otherwise + * -EOPNOTSUPP will be returned. + */ +static void disable_passdown_if_not_supported(struct pool_c *pt, + struct pool_features *pf) +{ + char buf[BDEVNAME_SIZE]; + + if (!pf->discard_passdown || data_dev_supports_discard(pt)) + return; + + DMWARN("Discard unsupported by data device (%s): Disabling discard passdown.", + bdevname(pt->data_dev->bdev, buf)); + + pf->discard_passdown = false; +} + static int bind_control_target(struct pool *pool, struct dm_target *ti) { struct pool_c *pt = ti->private; @@ -1855,23 +1881,9 @@ static int bind_control_target(struct pool *pool, struct dm_target *ti) pool->ti = ti; pool->low_water_blocks = pt->low_water_blocks; pool->pf = pt->pf; - set_pool_mode(pool, new_mode); - /* - * If discard_passdown was enabled verify that the data device - * supports discards. Disable discard_passdown if not; otherwise - * -EOPNOTSUPP will be returned. - */ - /* FIXME: pull this out into a sep fn. */ - if (pt->pf.discard_passdown) { - struct request_queue *q = bdev_get_queue(pt->data_dev->bdev); - if (!q || !blk_queue_discard(q)) { - char buf[BDEVNAME_SIZE]; - DMWARN("Discard unsupported by data device (%s): Disabling discard passdown.", - bdevname(pt->data_dev->bdev, buf)); - pool->pf.discard_passdown = 0; - } - } + disable_passdown_if_not_supported(pt, &pool->pf); + set_pool_mode(pool, new_mode); return 0; } @@ -1889,9 +1901,9 @@ static void unbind_control_target(struct pool *pool, struct dm_target *ti) static void pool_features_init(struct pool_features *pf) { pf->mode = PM_WRITE; - pf->zero_new_blocks = 1; - pf->discard_enabled = 1; - pf->discard_passdown = 1; + pf->zero_new_blocks = true; + pf->discard_enabled = true; + pf->discard_passdown = true; } static void __pool_destroy(struct pool *pool) @@ -2119,13 +2131,13 @@ static int parse_pool_features(struct dm_arg_set *as, struct pool_features *pf, argc--; if (!strcasecmp(arg_name, "skip_block_zeroing")) - pf->zero_new_blocks = 0; + pf->zero_new_blocks = false; else if (!strcasecmp(arg_name, "ignore_discard")) - pf->discard_enabled = 0; + pf->discard_enabled = false; else if (!strcasecmp(arg_name, "no_discard_passdown")) - pf->discard_passdown = 0; + pf->discard_passdown = false; else if (!strcasecmp(arg_name, "read_only")) pf->mode = PM_READ_ONLY; @@ -2261,6 +2273,7 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) pt->low_water_blocks = low_water_blocks; pt->pf = pf; ti->num_flush_requests = 1; + /* * Only need to enable discards if the pool should pass * them down to the data device. The thin device's discard @@ -2268,6 +2281,7 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) */ if (pf.discard_enabled && pf.discard_passdown) { ti->num_discard_requests = 1; + /* * Setting 'discards_supported' circumvents the normal * stacking of discard limits (this keeps the pool and -- cgit v1.2.3 From 0424caa14508f19ca8093d36c15250e0331a3a0a Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 26 Sep 2012 23:45:47 +0100 Subject: dm thin: fix discard support for data devices The discard limits that get established for a thin-pool or thin device may be incompatible with the pool's data device. Avoid this by checking the discard limits of the pool's data device. If an incompatibility is found then the pool's 'discard passdown' feature is disabled. Change thin_io_hints to ensure that a thin device always uses the same queue limits as its pool device. Introduce requested_pf to track whether or not the table line originally contained the no_discard_passdown flag and use this directly for table output. We prepare the correct setting for discard_passdown directly in bind_control_target (called from pool_io_hints) and store it in adjusted_pf rather than waiting until we have access to pool->pf in pool_preresume. Signed-off-by: Mike Snitzer Signed-off-by: Joe Thornber Signed-off-by: Alasdair G Kergon --- drivers/md/dm-thin.c | 87 ++++++++++++++++++++++++++++++++++------------------ 1 file changed, 57 insertions(+), 30 deletions(-) diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index e99f4134dbd7..c29410af1e22 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -580,7 +580,8 @@ struct pool_c { struct dm_target_callbacks callbacks; dm_block_t low_water_blocks; - struct pool_features pf; + struct pool_features requested_pf; /* Features requested during table load */ + struct pool_features adjusted_pf; /* Features used after adjusting for constituent devices */ }; /* @@ -1848,21 +1849,36 @@ static bool data_dev_supports_discard(struct pool_c *pt) /* * If discard_passdown was enabled verify that the data device - * supports discards. Disable discard_passdown if not; otherwise - * -EOPNOTSUPP will be returned. + * supports discards. Disable discard_passdown if not. */ -static void disable_passdown_if_not_supported(struct pool_c *pt, - struct pool_features *pf) +static void disable_passdown_if_not_supported(struct pool_c *pt) { + struct pool *pool = pt->pool; + struct block_device *data_bdev = pt->data_dev->bdev; + struct queue_limits *data_limits = &bdev_get_queue(data_bdev)->limits; + sector_t block_size = pool->sectors_per_block << SECTOR_SHIFT; + const char *reason = NULL; char buf[BDEVNAME_SIZE]; - if (!pf->discard_passdown || data_dev_supports_discard(pt)) + if (!pt->adjusted_pf.discard_passdown) return; - DMWARN("Discard unsupported by data device (%s): Disabling discard passdown.", - bdevname(pt->data_dev->bdev, buf)); + if (!data_dev_supports_discard(pt)) + reason = "discard unsupported"; + + else if (data_limits->max_discard_sectors < pool->sectors_per_block) + reason = "max discard sectors smaller than a block"; - pf->discard_passdown = false; + else if (data_limits->discard_granularity > block_size) + reason = "discard granularity larger than a block"; + + else if (block_size & (data_limits->discard_granularity - 1)) + reason = "discard granularity not a factor of block size"; + + if (reason) { + DMWARN("Data device (%s) %s: Disabling discard passdown.", bdevname(data_bdev, buf), reason); + pt->adjusted_pf.discard_passdown = false; + } } static int bind_control_target(struct pool *pool, struct dm_target *ti) @@ -1873,16 +1889,15 @@ static int bind_control_target(struct pool *pool, struct dm_target *ti) * We want to make sure that degraded pools are never upgraded. */ enum pool_mode old_mode = pool->pf.mode; - enum pool_mode new_mode = pt->pf.mode; + enum pool_mode new_mode = pt->adjusted_pf.mode; if (old_mode > new_mode) new_mode = old_mode; pool->ti = ti; pool->low_water_blocks = pt->low_water_blocks; - pool->pf = pt->pf; + pool->pf = pt->adjusted_pf; - disable_passdown_if_not_supported(pt, &pool->pf); set_pool_mode(pool, new_mode); return 0; @@ -2271,7 +2286,7 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) pt->metadata_dev = metadata_dev; pt->data_dev = data_dev; pt->low_water_blocks = low_water_blocks; - pt->pf = pf; + pt->adjusted_pf = pt->requested_pf = pf; ti->num_flush_requests = 1; /* @@ -2718,7 +2733,7 @@ static int pool_status(struct dm_target *ti, status_type_t type, format_dev_t(buf2, pt->data_dev->bdev->bd_dev), (unsigned long)pool->sectors_per_block, (unsigned long long)pt->low_water_blocks); - emit_flags(&pt->pf, result, sz, maxlen); + emit_flags(&pt->requested_pf, result, sz, maxlen); break; } @@ -2747,19 +2762,21 @@ static int pool_merge(struct dm_target *ti, struct bvec_merge_data *bvm, return min(max_size, q->merge_bvec_fn(q, bvm, biovec)); } -static void set_discard_limits(struct pool *pool, struct queue_limits *limits) +static void set_discard_limits(struct pool_c *pt, struct queue_limits *limits) { - /* - * FIXME: these limits may be incompatible with the pool's data device - */ + struct pool *pool = pt->pool; + struct queue_limits *data_limits; + limits->max_discard_sectors = pool->sectors_per_block; /* - * This is just a hint, and not enforced. We have to cope with - * bios that cover a block partially. A discard that spans a block - * boundary is not sent to this target. + * discard_granularity is just a hint, and not enforced. */ - limits->discard_granularity = pool->sectors_per_block << SECTOR_SHIFT; + if (pt->adjusted_pf.discard_passdown) { + data_limits = &bdev_get_queue(pt->data_dev->bdev)->limits; + limits->discard_granularity = data_limits->discard_granularity; + } else + limits->discard_granularity = pool->sectors_per_block << SECTOR_SHIFT; } static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits) @@ -2769,15 +2786,25 @@ static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits) blk_limits_io_min(limits, 0); blk_limits_io_opt(limits, pool->sectors_per_block << SECTOR_SHIFT); - if (pool->pf.discard_enabled) - set_discard_limits(pool, limits); + + /* + * pt->adjusted_pf is a staging area for the actual features to use. + * They get transferred to the live pool in bind_control_target() + * called from pool_preresume(). + */ + if (!pt->adjusted_pf.discard_enabled) + return; + + disable_passdown_if_not_supported(pt); + + set_discard_limits(pt, limits); } static struct target_type pool_target = { .name = "thin-pool", .features = DM_TARGET_SINGLETON | DM_TARGET_ALWAYS_WRITEABLE | DM_TARGET_IMMUTABLE, - .version = {1, 3, 0}, + .version = {1, 4, 0}, .module = THIS_MODULE, .ctr = pool_ctr, .dtr = pool_dtr, @@ -3056,19 +3083,19 @@ static int thin_iterate_devices(struct dm_target *ti, return 0; } +/* + * A thin device always inherits its queue limits from its pool. + */ static void thin_io_hints(struct dm_target *ti, struct queue_limits *limits) { struct thin_c *tc = ti->private; - struct pool *pool = tc->pool; - blk_limits_io_min(limits, 0); - blk_limits_io_opt(limits, pool->sectors_per_block << SECTOR_SHIFT); - set_discard_limits(pool, limits); + *limits = bdev_get_queue(tc->pool_dev->bdev)->limits; } static struct target_type thin_target = { .name = "thin", - .version = {1, 3, 0}, + .version = {1, 4, 0}, .module = THIS_MODULE, .ctr = thin_ctr, .dtr = thin_dtr, -- cgit v1.2.3 From 1d55f6bcc0331d744cd5b56c4ee79e3809438161 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 26 Sep 2012 23:45:48 +0100 Subject: dm verity: fix overflow check This patch fixes sector_t overflow checking in dm-verity. Without this patch, the code checks for overflow only if sector_t is smaller than long long, not if sector_t and long long have the same size. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon --- drivers/md/dm-verity.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/md/dm-verity.c b/drivers/md/dm-verity.c index 254d19268ad2..892ae2766aa6 100644 --- a/drivers/md/dm-verity.c +++ b/drivers/md/dm-verity.c @@ -718,8 +718,8 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv) v->hash_dev_block_bits = ffs(num) - 1; if (sscanf(argv[5], "%llu%c", &num_ll, &dummy) != 1 || - num_ll << (v->data_dev_block_bits - SECTOR_SHIFT) != - (sector_t)num_ll << (v->data_dev_block_bits - SECTOR_SHIFT)) { + (sector_t)(num_ll << (v->data_dev_block_bits - SECTOR_SHIFT)) + >> (v->data_dev_block_bits - SECTOR_SHIFT) != num_ll) { ti->error = "Invalid data blocks"; r = -EINVAL; goto bad; @@ -733,8 +733,8 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv) } if (sscanf(argv[6], "%llu%c", &num_ll, &dummy) != 1 || - num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT) != - (sector_t)num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT)) { + (sector_t)(num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT)) + >> (v->hash_dev_block_bits - SECTOR_SHIFT) != num_ll) { ti->error = "Invalid hash start"; r = -EINVAL; goto bad; -- cgit v1.2.3 From 833dd8224edda0bc1cfa1b0fd5cbe7a36fd59db8 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 27 Sep 2012 09:13:43 +1000 Subject: drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN PFIFO_INTR = 0x40000000 appears to be a normal case on nvc0/nve0 PFIFO, the binary driver appears to completely ignore it in its PFIFO interrupt handler and even masks off the bit (as we do) in PFIFO_INTR_EN at init time. The bits still light up in the hardware sometimes though, so lets just ignore any bits we haven't explicitely requested. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_fifo.c | 3 ++- drivers/gpu/drm/nouveau/nve0_fifo.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvc0_fifo.c b/drivers/gpu/drm/nouveau/nvc0_fifo.c index 7d85553d518c..cd39eb99f5b1 100644 --- a/drivers/gpu/drm/nouveau/nvc0_fifo.c +++ b/drivers/gpu/drm/nouveau/nvc0_fifo.c @@ -373,7 +373,8 @@ nvc0_fifo_isr_subfifo_intr(struct drm_device *dev, int unit) static void nvc0_fifo_isr(struct drm_device *dev) { - u32 stat = nv_rd32(dev, 0x002100); + u32 mask = nv_rd32(dev, 0x002140); + u32 stat = nv_rd32(dev, 0x002100) & mask; if (stat & 0x00000100) { NV_INFO(dev, "PFIFO: unknown status 0x00000100\n"); diff --git a/drivers/gpu/drm/nouveau/nve0_fifo.c b/drivers/gpu/drm/nouveau/nve0_fifo.c index e98d144e6eb9..281bece751b6 100644 --- a/drivers/gpu/drm/nouveau/nve0_fifo.c +++ b/drivers/gpu/drm/nouveau/nve0_fifo.c @@ -345,7 +345,8 @@ nve0_fifo_isr_subfifo_intr(struct drm_device *dev, int unit) static void nve0_fifo_isr(struct drm_device *dev) { - u32 stat = nv_rd32(dev, 0x002100); + u32 mask = nv_rd32(dev, 0x002140); + u32 stat = nv_rd32(dev, 0x002100) & mask; if (stat & 0x00000100) { NV_INFO(dev, "PFIFO: unknown status 0x00000100\n"); -- cgit v1.2.3 From 84d5dfbf09be6be71d6dda63d99a8303e85663c7 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 24 Sep 2012 07:54:33 +0200 Subject: ARM: Orion5x: Fix too small coherent pool. Some Orion5x devices allocate their coherent buffers from atomic context. Increase size of atomic coherent pool to make sure such the allocations won't fail during boot. Signed-off-by: Andrew Lunn Acked-by: Jason Cooper Signed-off-by: Olof Johansson --- arch/arm/mach-orion5x/common.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 410291c67666..a6cd14ab1e4e 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -204,6 +204,13 @@ void __init orion5x_wdt_init(void) void __init orion5x_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + + /* + * Some Orion5x devices allocate their coherent buffers from atomic + * context. Increase size of atomic coherent pool to make sure such + * the allocations won't fail. + */ + init_dma_coherent_pool_size(SZ_1M); } int orion5x_tclk; -- cgit v1.2.3 From 80b4812407c6b1f66a4f2430e69747a13f010839 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 27 Sep 2012 12:35:21 +1000 Subject: md/raid10: fix "enough" function for detecting if array is failed. The 'enough' function is written to work with 'near' arrays only in that is implicitly assumes that the offset from one 'group' of devices to the next is the same as the number of copies. In reality it is the number of 'near' copies. So change it to make this number explicit. This bug makes it possible to run arrays without enough drives present, which is dangerous. It is appropriate for an -stable kernel, but will almost certainly need to be modified for some of them. Cc: stable@vger.kernel.org Reported-by: Jakub Husák Signed-off-by: NeilBrown --- drivers/md/raid10.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 1c2eb38f3c51..0138a727c1f3 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1512,14 +1512,16 @@ static int _enough(struct r10conf *conf, struct geom *geo, int ignore) do { int n = conf->copies; int cnt = 0; + int this = first; while (n--) { - if (conf->mirrors[first].rdev && - first != ignore) + if (conf->mirrors[this].rdev && + this != ignore) cnt++; - first = (first+1) % geo->raid_disks; + this = (this+1) % geo->raid_disks; } if (cnt == 0) return 0; + first = (first + geo->near_copies) % geo->raid_disks; } while (first != 0); return 1; } -- cgit v1.2.3 From 424597921ac1fc2a475a656ea5895cbe78f25d0d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 3 Sep 2012 03:24:18 -0400 Subject: um: take cleaning singlestep to start_thread() ... assuming it's needed to be done at all Signed-off-by: Al Viro --- arch/um/kernel/exec.c | 24 +++++------------------- 1 file changed, 5 insertions(+), 19 deletions(-) diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c index 6cade9366364..4cab0c78684b 100644 --- a/arch/um/kernel/exec.c +++ b/arch/um/kernel/exec.c @@ -41,32 +41,18 @@ void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp) { PT_REGS_IP(regs) = eip; PT_REGS_SP(regs) = esp; -} -EXPORT_SYMBOL(start_thread); - -static long execve1(const char *file, - const char __user *const __user *argv, - const char __user *const __user *env) -{ - long error; - - error = do_execve(file, argv, env, ¤t->thread.regs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; + current->ptrace &= ~PT_DTRACE; #ifdef SUBARCH_EXECVE1 - SUBARCH_EXECVE1(¤t->thread.regs.regs); + SUBARCH_EXECVE1(regs->regs); #endif - task_unlock(current); - } - return error; } +EXPORT_SYMBOL(start_thread); long um_execve(const char *file, const char __user *const __user *argv, const char __user *const __user *env) { long err; - err = execve1(file, argv, env); + err = do_execve(file, argv, env, ¤t->thread.regs); if (!err) UML_LONGJMP(current->thread.exec_buf, 1); return err; @@ -81,7 +67,7 @@ long sys_execve(const char __user *file, const char __user *const __user *argv, filename = getname(file); error = PTR_ERR(filename); if (IS_ERR(filename)) goto out; - error = execve1(filename, argv, env); + error = do_execve(filename, argv, env, ¤t->thread.regs); putname(filename); out: return error; -- cgit v1.2.3 From bf56d57638452a8ee9241c9ca082d59cd2ca4cc8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 5 Sep 2012 23:20:33 -0400 Subject: um: don't leak floating point state and segment registers on execve() Signed-off-by: Al Viro --- arch/um/kernel/exec.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c index 4cab0c78684b..8c82786da823 100644 --- a/arch/um/kernel/exec.c +++ b/arch/um/kernel/exec.c @@ -39,6 +39,7 @@ void flush_thread(void) void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp) { + get_safe_registers(regs->regs.gp, regs->regs.fp); PT_REGS_IP(regs) = eip; PT_REGS_SP(regs) = esp; current->ptrace &= ~PT_DTRACE; -- cgit v1.2.3 From f9a38eace4498a5e9f6d2cdfc879d5444edc3a5f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 6 Sep 2012 13:39:47 -0400 Subject: um: let signal_delivered() do SIGTRAP on singlestepping into handler ... rather than duplicating that in sigframe setup code (and doing that inconsistently, at that) Signed-off-by: Al Viro --- arch/um/kernel/signal.c | 6 +++++- arch/x86/um/signal.c | 6 ------ 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c index 7362d58efc29..cc9c2350e417 100644 --- a/arch/um/kernel/signal.c +++ b/arch/um/kernel/signal.c @@ -22,9 +22,13 @@ static void handle_signal(struct pt_regs *regs, unsigned long signr, struct k_sigaction *ka, siginfo_t *info) { sigset_t *oldset = sigmask_to_save(); + int singlestep = 0; unsigned long sp; int err; + if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED)) + singlestep = 1; + /* Did we come from a system call? */ if (PT_REGS_SYSCALL_NR(regs) >= 0) { /* If so, check system call restarting.. */ @@ -61,7 +65,7 @@ static void handle_signal(struct pt_regs *regs, unsigned long signr, if (err) force_sigsegv(signr, current); else - signal_delivered(signr, info, ka, regs, 0); + signal_delivered(signr, info, ka, regs, singlestep); } static int kern_do_signal(struct pt_regs *regs) diff --git a/arch/x86/um/signal.c b/arch/x86/um/signal.c index a508cea13503..ba7363ecf896 100644 --- a/arch/x86/um/signal.c +++ b/arch/x86/um/signal.c @@ -416,9 +416,6 @@ int setup_signal_stack_sc(unsigned long stack_top, int sig, PT_REGS_AX(regs) = (unsigned long) sig; PT_REGS_DX(regs) = (unsigned long) 0; PT_REGS_CX(regs) = (unsigned long) 0; - - if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED)) - ptrace_notify(SIGTRAP); return 0; } @@ -466,9 +463,6 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, PT_REGS_AX(regs) = (unsigned long) sig; PT_REGS_DX(regs) = (unsigned long) &frame->info; PT_REGS_CX(regs) = (unsigned long) &frame->uc; - - if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED)) - ptrace_notify(SIGTRAP); return 0; } -- cgit v1.2.3 From d2ce4e92fa4f79a5fdb4cc912b411280afe21697 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 20 Sep 2012 09:28:25 -0400 Subject: um: kill thread->forking we only use that to tell copy_thread() done by syscall from that done by kernel_thread(). However, it's easier to do simply by checking PF_KTHREAD in thread flags. Merge sys_clone() guts for 32bit and 64bit, while we are at it... Signed-off-by: Al Viro --- arch/um/include/asm/processor-generic.h | 9 --------- arch/um/kernel/process.c | 8 ++++---- arch/um/kernel/syscall.c | 24 ++++++++++++------------ arch/x86/um/shared/sysdep/syscalls.h | 2 ++ arch/x86/um/sys_call_table_32.c | 2 +- arch/x86/um/syscalls_32.c | 27 +++++++-------------------- arch/x86/um/syscalls_64.c | 23 +++-------------------- 7 files changed, 29 insertions(+), 66 deletions(-) diff --git a/arch/um/include/asm/processor-generic.h b/arch/um/include/asm/processor-generic.h index 69f1c57a8d0d..33a6a2423bd2 100644 --- a/arch/um/include/asm/processor-generic.h +++ b/arch/um/include/asm/processor-generic.h @@ -20,14 +20,6 @@ struct mm_struct; struct thread_struct { struct task_struct *saved_task; - /* - * This flag is set to 1 before calling do_fork (and analyzed in - * copy_thread) to mark that we are begin called from userspace (fork / - * vfork / clone), and reset to 0 after. It is left to 0 when called - * from kernelspace (i.e. kernel_thread() or fork_idle(), - * as of 2.6.11). - */ - int forking; struct pt_regs regs; int singlestep_syscall; void *fault_addr; @@ -58,7 +50,6 @@ struct thread_struct { #define INIT_THREAD \ { \ - .forking = 0, \ .regs = EMPTY_REGS, \ .fault_addr = NULL, \ .prev_sched = NULL, \ diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index 57fc7028714a..c5f5afa50745 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -181,11 +181,12 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, struct pt_regs *regs) { void (*handler)(void); + int kthread = current->flags & PF_KTHREAD; int ret = 0; p->thread = (struct thread_struct) INIT_THREAD; - if (current->thread.forking) { + if (!kthread) { memcpy(&p->thread.regs.regs, ®s->regs, sizeof(p->thread.regs.regs)); PT_REGS_SET_SYSCALL_RETURN(&p->thread.regs, 0); @@ -195,8 +196,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, handler = fork_handler; arch_copy_thread(¤t->thread.arch, &p->thread.arch); - } - else { + } else { get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp); p->thread.request.u.thread = current->thread.request.u.thread; handler = new_thread_handler; @@ -204,7 +204,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, new_thread(task_stack_page(p), &p->thread.switch_buf, handler); - if (current->thread.forking) { + if (!kthread) { clear_flushed_tls(p); /* diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c index f958cb876ee3..a4c6d8eee74c 100644 --- a/arch/um/kernel/syscall.c +++ b/arch/um/kernel/syscall.c @@ -17,25 +17,25 @@ long sys_fork(void) { - long ret; - - current->thread.forking = 1; - ret = do_fork(SIGCHLD, UPT_SP(¤t->thread.regs.regs), + return do_fork(SIGCHLD, UPT_SP(¤t->thread.regs.regs), ¤t->thread.regs, 0, NULL, NULL); - current->thread.forking = 0; - return ret; } long sys_vfork(void) { - long ret; - - current->thread.forking = 1; - ret = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, UPT_SP(¤t->thread.regs.regs), ¤t->thread.regs, 0, NULL, NULL); - current->thread.forking = 0; - return ret; +} + +long sys_clone(unsigned long clone_flags, unsigned long newsp, + void __user *parent_tid, void __user *child_tid) +{ + if (!newsp) + newsp = UPT_SP(¤t->thread.regs.regs); + + return do_fork(clone_flags, newsp, ¤t->thread.regs, 0, parent_tid, + child_tid); } long old_mmap(unsigned long addr, unsigned long len, diff --git a/arch/x86/um/shared/sysdep/syscalls.h b/arch/x86/um/shared/sysdep/syscalls.h index bd9a89b67e41..ca255a805ed9 100644 --- a/arch/x86/um/shared/sysdep/syscalls.h +++ b/arch/x86/um/shared/sysdep/syscalls.h @@ -1,3 +1,5 @@ +extern long sys_clone(unsigned long clone_flags, unsigned long newsp, + void __user *parent_tid, void __user *child_tid); #ifdef __i386__ #include "syscalls_32.h" #else diff --git a/arch/x86/um/sys_call_table_32.c b/arch/x86/um/sys_call_table_32.c index 68d1dc91b37b..b5408cecac6c 100644 --- a/arch/x86/um/sys_call_table_32.c +++ b/arch/x86/um/sys_call_table_32.c @@ -28,7 +28,7 @@ #define ptregs_execve sys_execve #define ptregs_iopl sys_iopl #define ptregs_vm86old sys_vm86old -#define ptregs_clone sys_clone +#define ptregs_clone i386_clone #define ptregs_vm86 sys_vm86 #define ptregs_sigaltstack sys_sigaltstack #define ptregs_vfork sys_vfork diff --git a/arch/x86/um/syscalls_32.c b/arch/x86/um/syscalls_32.c index b853e8600b9d..db444c7218fe 100644 --- a/arch/x86/um/syscalls_32.c +++ b/arch/x86/um/syscalls_32.c @@ -3,37 +3,24 @@ * Licensed under the GPL */ -#include "linux/sched.h" -#include "linux/shm.h" -#include "linux/ipc.h" -#include "linux/syscalls.h" -#include "asm/mman.h" -#include "asm/uaccess.h" -#include "asm/unistd.h" +#include +#include /* * The prototype on i386 is: * - * int clone(int flags, void * child_stack, int * parent_tidptr, struct user_desc * newtls, int * child_tidptr) + * int clone(int flags, void * child_stack, int * parent_tidptr, struct user_desc * newtls * * and the "newtls" arg. on i386 is read by copy_thread directly from the * register saved on the stack. */ -long sys_clone(unsigned long clone_flags, unsigned long newsp, - int __user *parent_tid, void *newtls, int __user *child_tid) +long i386_clone(unsigned long clone_flags, unsigned long newsp, + int __user *parent_tid, void *newtls, int __user *child_tid) { - long ret; - - if (!newsp) - newsp = UPT_SP(¤t->thread.regs.regs); - - current->thread.forking = 1; - ret = do_fork(clone_flags, newsp, ¤t->thread.regs, 0, parent_tid, - child_tid); - current->thread.forking = 0; - return ret; + return sys_clone(clone_flags, newsp, parent_tid, child_tid); } + long sys_sigaction(int sig, const struct old_sigaction __user *act, struct old_sigaction __user *oact) { diff --git a/arch/x86/um/syscalls_64.c b/arch/x86/um/syscalls_64.c index f3d82bb6e15a..adb08eb5c22a 100644 --- a/arch/x86/um/syscalls_64.c +++ b/arch/x86/um/syscalls_64.c @@ -5,12 +5,9 @@ * Licensed under the GPL */ -#include "linux/linkage.h" -#include "linux/personality.h" -#include "linux/utsname.h" -#include "asm/prctl.h" /* XXX This should get the constants from libc */ -#include "asm/uaccess.h" -#include "os.h" +#include +#include /* XXX This should get the constants from libc */ +#include long arch_prctl(struct task_struct *task, int code, unsigned long __user *addr) { @@ -79,20 +76,6 @@ long sys_arch_prctl(int code, unsigned long addr) return arch_prctl(current, code, (unsigned long __user *) addr); } -long sys_clone(unsigned long clone_flags, unsigned long newsp, - void __user *parent_tid, void __user *child_tid) -{ - long ret; - - if (!newsp) - newsp = UPT_SP(¤t->thread.regs.regs); - current->thread.forking = 1; - ret = do_fork(clone_flags, newsp, ¤t->thread.regs, 0, parent_tid, - child_tid); - current->thread.forking = 0; - return ret; -} - void arch_switch_to(struct task_struct *to) { if ((to->thread.arch.fs == 0) || (to->mm == NULL)) -- cgit v1.2.3 From 01bb6501779ed0b6dc6c55be34b49eaa6306fdd8 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Sun, 23 Sep 2012 22:56:00 +0200 Subject: USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq Fixes the following NULL pointer dereference: [ 7.740000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.810000] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 7.810000] pgd = c3a38000 [ 7.810000] [00000028] *pgd=23a8c831, *pte=00000000, *ppte=00000000 [ 7.810000] Internal error: Oops: 17 [#1] PREEMPT ARM [ 7.810000] Modules linked in: ohci_hcd(+) regmap_i2c snd_pcm usbcore snd_page_alloc at91_cf snd_timer pcmcia_rsrc snd soundcore gpio_keys regmap_spi pcmcia_core usb_common nls_base [ 7.810000] CPU: 0 Not tainted (3.6.0-rc6-mpa+ #264) [ 7.810000] PC is at __gpio_to_irq+0x18/0x40 [ 7.810000] LR is at ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd] [ 7.810000] pc : [] lr : [] psr: 40000093 [ 7.810000] sp : c3a11c40 ip : c3a11c50 fp : c3a11c4c [ 7.810000] r10: 00000000 r9 : c02dcd6e r8 : fefff400 [ 7.810000] r7 : 00000000 r6 : c02cc928 r5 : 00000030 r4 : c02dd168 [ 7.810000] r3 : c02e7350 r2 : ffffffea r1 : c02cc928 r0 : 00000000 [ 7.810000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 7.810000] Control: c000717f Table: 23a38000 DAC: 00000015 [ 7.810000] Process modprobe (pid: 285, stack limit = 0xc3a10270) [ 7.810000] Stack: (0xc3a11c40 to 0xc3a12000) [ 7.810000] 1c40: c3a11c6c c3a11c50 bf08f694 c01392cc c3a11c84 c2c38b00 c3806900 00000030 [ 7.810000] 1c60: c3a11ca4 c3a11c70 c0051264 bf08f680 c3a11cac c3a11c80 c003e764 c3806900 [ 7.810000] 1c80: c2c38b00 c02cb05c c02cb000 fefff400 c3806930 c3a11cf4 c3a11cbc c3a11ca8 [ 7.810000] 1ca0: c005142c c005123c c3806900 c3805a00 c3a11cd4 c3a11cc0 c0053f24 c00513e4 [ 7.810000] 1cc0: c3a11cf4 00000030 c3a11cec c3a11cd8 c005120c c0053e88 00000000 00000000 [ 7.810000] 1ce0: c3a11d1c c3a11cf0 c00124d0 c00511e0 01400000 00000001 00000012 00000000 [ 7.810000] 1d00: ffffffff c3a11d94 00000030 00000000 c3a11d34 c3a11d20 c005120c c0012438 [ 7.810000] 1d20: c001dac4 00000012 c3a11d4c c3a11d38 c0009b08 c00511e0 c00523fc 60000013 [ 7.810000] 1d40: c3a11d5c c3a11d50 c0008510 c0009ab4 c3a11ddc c3a11d60 c0008eb4 c00084f0 [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff c3a11dec c3a11db8 00000000 c2c38b00 bf08f670 c3806900 [ 7.810000] 1dc0: 00000000 00000080 c02cc928 00000030 c3a11e0c c3a11de0 c0052764 c00520d8 [ 7.810000] 1de0: c3a11dfc 00000000 00000000 00000002 bf090f61 00000004 c02cc930 c02cc928 [ 7.810000] 1e00: c3a11e4c c3a11e10 bf090978 c005269c bf090f61 c02cc928 bf093000 c02dd170 [ 7.810000] 1e20: c3a11e3c c02cc930 c02cc930 bf0911d0 bf0911d0 bf093000 c3a10000 00000000 [ 7.810000] 1e40: c3a11e5c c3a11e50 c0155b7c bf090808 c3a11e7c c3a11e60 c0154690 c0155b6c [ 7.810000] 1e60: c02cc930 c02cc964 bf0911d0 c3a11ea0 c3a11e9c c3a11e80 c015484c c01545e8 [ 7.810000] 1e80: 00000000 00000000 c01547e4 bf0911d0 c3a11ec4 c3a11ea0 c0152e58 c01547f4 [ 7.810000] 1ea0: c381b88c c384ab10 c2c10540 bf0911d0 00000000 c02d7518 c3a11ed4 c3a11ec8 [ 7.810000] 1ec0: c01544c0 c0152e0c c3a11efc c3a11ed8 c01536cc c01544b0 bf091075 c3a11ee8 [ 7.810000] 1ee0: bf049af0 bf09120c bf0911d0 00000000 c3a11f1c c3a11f00 c0154e9c c0153628 [ 7.810000] 1f00: bf049af0 bf09120c 000ae190 00000000 c3a11f2c c3a11f20 c0155f58 c0154e04 [ 7.810000] 1f20: c3a11f44 c3a11f30 bf093054 c0155f1c 00000000 00006a4f c3a11f7c c3a11f48 [ 7.810000] 1f40: c0008638 bf093010 bf09120c 000ae190 00000000 c00093c4 00006a4f bf09120c [ 7.810000] 1f60: 000ae190 00000000 c00093c4 00000000 c3a11fa4 c3a11f80 c004fdc4 c000859c [ 7.810000] 1f80: c3a11fa4 000ae190 00006a4f 00016eb8 000ad018 00000080 00000000 c3a11fa8 [ 7.810000] 1fa0: c0009260 c004fd58 00006a4f 00016eb8 000ae190 00006a4f 000ae100 00000000 [ 7.810000] 1fc0: 00006a4f 00016eb8 000ad018 00000080 000adba0 000ad208 00000000 000ad3d8 [ 7.810000] 1fe0: beaf7ae8 beaf7ad8 000172b8 b6e4e940 20000010 000ae190 00000000 00000000 [ 7.810000] Backtrace: [ 7.810000] [] (__gpio_to_irq+0x0/0x40) from [] (ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd]) [ 7.810000] [] (ohci_hcd_at91_overcurrent_irq+0x0/0xb4 [ohci_hcd]) from [] (handle_irq_event_percpu+0x38/0x1a8) [ 7.810000] r6:00000030 r5:c3806900 r4:c2c38b00 [ 7.810000] [] (handle_irq_event_percpu+0x0/0x1a8) from [] (handle_irq_event+0x58/0x7c) [ 7.810000] [] (handle_irq_event+0x0/0x7c) from [] (handle_simple_irq+0xac/0xd8) [ 7.810000] r5:c3805a00 r4:c3806900 [ 7.810000] [] (handle_simple_irq+0x0/0xd8) from [] (generic_handle_irq+0x3c/0x48) [ 7.810000] r4:00000030 [ 7.810000] [] (generic_handle_irq+0x0/0x48) from [] (gpio_irq_handler+0xa8/0xfc) [ 7.810000] r4:00000000 [ 7.810000] [] (gpio_irq_handler+0x0/0xfc) from [] (generic_handle_irq+0x3c/0x48) [ 7.810000] [] (generic_handle_irq+0x0/0x48) from [] (handle_IRQ+0x64/0x88) [ 7.810000] r4:00000012 [ 7.810000] [] (handle_IRQ+0x0/0x88) from [] (at91_aic_handle_irq+0x30/0x38) [ 7.810000] r5:60000013 r4:c00523fc [ 7.810000] [] (at91_aic_handle_irq+0x0/0x38) from [] (__irq_svc+0x34/0x60) [ 7.810000] Exception stack(0xc3a11d60 to 0xc3a11da8) [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff [ 7.810000] [] (__setup_irq+0x0/0x458) from [] (request_threaded_irq+0xd8/0x134) [ 7.810000] [] (request_threaded_irq+0x0/0x134) from [] (ohci_hcd_at91_drv_probe+0x180/0x41c [ohci_hcd]) [ 7.810000] [] (ohci_hcd_at91_drv_probe+0x0/0x41c [ohci_hcd]) from [] (platform_drv_probe+0x20/0x24) [ 7.810000] [] (platform_drv_probe+0x0/0x24) from [] (driver_probe_device+0xb8/0x20c) [ 7.810000] [] (driver_probe_device+0x0/0x20c) from [] (__driver_attach+0x68/0x88) [ 7.810000] r7:c3a11ea0 r6:bf0911d0 r5:c02cc964 r4:c02cc930 [ 7.810000] [] (__driver_attach+0x0/0x88) from [] (bus_for_each_dev+0x5c/0x9c) [ 7.810000] r6:bf0911d0 r5:c01547e4 r4:00000000 [ 7.810000] [] (bus_for_each_dev+0x0/0x9c) from [] (driver_attach+0x20/0x28) [ 7.810000] r7:c02d7518 r6:00000000 r5:bf0911d0 r4:c2c10540 [ 7.810000] [] (driver_attach+0x0/0x28) from [] (bus_add_driver+0xb4/0x22c) [ 7.810000] [] (bus_add_driver+0x0/0x22c) from [] (driver_register+0xa8/0x144) [ 7.810000] r7:00000000 r6:bf0911d0 r5:bf09120c r4:bf049af0 [ 7.810000] [] (driver_register+0x0/0x144) from [] (platform_driver_register+0x4c/0x60) [ 7.810000] r7:00000000 r6:000ae190 r5:bf09120c r4:bf049af0 [ 7.810000] [] (platform_driver_register+0x0/0x60) from [] (ohci_hcd_mod_init+0x54/0x8c [ohci_hcd]) [ 7.810000] [] (ohci_hcd_mod_init+0x0/0x8c [ohci_hcd]) from [] (do_one_initcall+0xac/0x174) [ 7.810000] r4:00006a4f [ 7.810000] [] (do_one_initcall+0x0/0x174) from [] (sys_init_module+0x7c/0x1a0) [ 7.810000] [] (sys_init_module+0x0/0x1a0) from [] (ret_fast_syscall+0x0/0x2c) [ 7.810000] r7:00000080 r6:000ad018 r5:00016eb8 r4:00006a4f [ 7.810000] Code: e24cb004 e59f3028 e1a02000 e7930180 (e5903028) [ 7.810000] ---[ end trace 85aa37ed128143b5 ]--- [ 7.810000] Kernel panic - not syncing: Fatal exception in interrupt Commit 6fffb77c (USB: ohci-at91: fix PIO handling in relation with number of ports) started setting unused pins to EINVAL. But this exposed a bug in the ohci_hcd_at91_overcurrent_irq function where the gpio was used without being checked to see if it is valid. This patches fixed the issue by adding the gpio valid check. Signed-off-by: Joachim Eastwood Cc: stable # [3.4+] whereever 6fffb77c went Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-at91.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index aaa8d2bce217..0bf72f943b00 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -467,7 +467,8 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) /* From the GPIO notifying the over-current situation, find * out the corresponding port */ at91_for_each_port(port) { - if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { + if (gpio_is_valid(pdata->overcurrent_pin[port]) && + gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { gpio = pdata->overcurrent_pin[port]; break; } -- cgit v1.2.3 From 0d00dc2611abbe6ad244d50569c2ee82ce42846c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 26 Sep 2012 13:09:53 -0400 Subject: USB: Fix race condition when removing host controllers This patch (as1607) fixes a race that can occur if a USB host controller is removed while a process is reading the /sys/kernel/debug/usb/devices file. The usb_device_read() routine uses the bus->root_hub pointer to determine whether or not the root hub is registered. The is not a valid test, because the pointer is set before the root hub gets registered and remains set even after the root hub is unregistered and deallocated. As a result, usb_device_read() or usb_device_dump() can access freed memory, causing an oops. The patch changes the test to use the hcd->rh_registered flag, which does get set and cleared at the appropriate times. It also makes sure to hold the usb_bus_list_lock mutex while setting the flag, so that usb_device_read() will become aware of new root hubs as soon as they are registered. Signed-off-by: Alan Stern Reported-by: Don Zickus Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devices.c | 2 +- drivers/usb/core/hcd.c | 6 ++---- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index d95696584762..3440812b4a84 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -624,7 +624,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, /* print devices for all busses */ list_for_each_entry(bus, &usb_bus_list, bus_list) { /* recurse through all children of the root hub */ - if (!bus->root_hub) + if (!bus_to_hcd(bus)->rh_registered) continue; usb_lock_device(bus->root_hub); ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index bc84106ac057..75ba2091f9b4 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1011,10 +1011,7 @@ static int register_root_hub(struct usb_hcd *hcd) if (retval) { dev_err (parent_dev, "can't register root hub for %s, %d\n", dev_name(&usb_dev->dev), retval); - } - mutex_unlock(&usb_bus_list_lock); - - if (retval == 0) { + } else { spin_lock_irq (&hcd_root_hub_lock); hcd->rh_registered = 1; spin_unlock_irq (&hcd_root_hub_lock); @@ -1023,6 +1020,7 @@ static int register_root_hub(struct usb_hcd *hcd) if (HCD_DEAD(hcd)) usb_hc_died (hcd); /* This time clean up */ } + mutex_unlock(&usb_bus_list_lock); return retval; } -- cgit v1.2.3 From 7f8436a1269eaaf2d0b1054a325eddf4e14cb80d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 24 Sep 2012 18:29:01 +0000 Subject: l2tp: fix return value check In case of error, the function genlmsg_put() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- net/l2tp/l2tp_netlink.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/l2tp/l2tp_netlink.c b/net/l2tp/l2tp_netlink.c index d71cd9229a47..6f936358d664 100644 --- a/net/l2tp/l2tp_netlink.c +++ b/net/l2tp/l2tp_netlink.c @@ -80,8 +80,8 @@ static int l2tp_nl_cmd_noop(struct sk_buff *skb, struct genl_info *info) hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &l2tp_nl_family, 0, L2TP_CMD_NOOP); - if (IS_ERR(hdr)) { - ret = PTR_ERR(hdr); + if (!hdr) { + ret = -EMSGSIZE; goto err_out; } @@ -250,8 +250,8 @@ static int l2tp_nl_tunnel_send(struct sk_buff *skb, u32 pid, u32 seq, int flags, hdr = genlmsg_put(skb, pid, seq, &l2tp_nl_family, flags, L2TP_CMD_TUNNEL_GET); - if (IS_ERR(hdr)) - return PTR_ERR(hdr); + if (!hdr) + return -EMSGSIZE; if (nla_put_u8(skb, L2TP_ATTR_PROTO_VERSION, tunnel->version) || nla_put_u32(skb, L2TP_ATTR_CONN_ID, tunnel->tunnel_id) || @@ -617,8 +617,8 @@ static int l2tp_nl_session_send(struct sk_buff *skb, u32 pid, u32 seq, int flags sk = tunnel->sock; hdr = genlmsg_put(skb, pid, seq, &l2tp_nl_family, flags, L2TP_CMD_SESSION_GET); - if (IS_ERR(hdr)) - return PTR_ERR(hdr); + if (!hdr) + return -EMSGSIZE; if (nla_put_u32(skb, L2TP_ATTR_CONN_ID, tunnel->tunnel_id) || nla_put_u32(skb, L2TP_ATTR_SESSION_ID, session->session_id) || -- cgit v1.2.3 From a326e6dd315ee38c280b7ecf8a0d777952e384cd Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 24 Sep 2012 18:29:35 +0000 Subject: team: fix return value check In case of error, the function genlmsg_put() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 3ffe8a6e3c8b..f8cd61f449a4 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1653,8 +1653,8 @@ static int team_nl_cmd_noop(struct sk_buff *skb, struct genl_info *info) hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &team_nl_family, 0, TEAM_CMD_NOOP); - if (IS_ERR(hdr)) { - err = PTR_ERR(hdr); + if (!hdr) { + err = -EMSGSIZE; goto err_msg_put; } @@ -1848,8 +1848,8 @@ start_again: hdr = genlmsg_put(skb, pid, seq, &team_nl_family, flags | NLM_F_MULTI, TEAM_CMD_OPTIONS_GET); - if (IS_ERR(hdr)) - return PTR_ERR(hdr); + if (!hdr) + return -EMSGSIZE; if (nla_put_u32(skb, TEAM_ATTR_TEAM_IFINDEX, team->dev->ifindex)) goto nla_put_failure; @@ -2068,8 +2068,8 @@ static int team_nl_fill_port_list_get(struct sk_buff *skb, hdr = genlmsg_put(skb, pid, seq, &team_nl_family, flags, TEAM_CMD_PORT_LIST_GET); - if (IS_ERR(hdr)) - return PTR_ERR(hdr); + if (!hdr) + return -EMSGSIZE; if (nla_put_u32(skb, TEAM_ATTR_TEAM_IFINDEX, team->dev->ifindex)) goto nla_put_failure; -- cgit v1.2.3 From beb5ac20b3f90ffabac1eecd3c00205255df0728 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 26 Sep 2012 19:51:58 +0000 Subject: netdev: pasemi: fix return value check in pasemi_mac_phy_init() In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/pasemi/pasemi_mac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c index e559dfa06d6a..6fa74d530e44 100644 --- a/drivers/net/ethernet/pasemi/pasemi_mac.c +++ b/drivers/net/ethernet/pasemi/pasemi_mac.c @@ -1101,9 +1101,9 @@ static int pasemi_mac_phy_init(struct net_device *dev) phydev = of_phy_connect(dev, phy_dn, &pasemi_adjust_link, 0, PHY_INTERFACE_MODE_SGMII); - if (IS_ERR(phydev)) { + if (!phydev) { printk(KERN_ERR "%s: Could not attach to phy\n", dev->name); - return PTR_ERR(phydev); + return -ENODEV; } mac->phydev = phydev; -- cgit v1.2.3 From bbb35efcda41d589cfff5e2b08c5fb457791117c Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Thu, 27 Sep 2012 20:10:57 +0200 Subject: um: Fix IPC on um commit c1d7e01d (ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION) forgot UML and broke IPC on it. Also UML has to select ARCH_WANT_IPC_PARSE_VERSION usin Kconfig. Reported-and-tested-by: Signed-off-by: Richard Weinberger --- arch/x86/um/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/um/Kconfig b/arch/x86/um/Kconfig index 9926e11a772d..aeaff8bef2f1 100644 --- a/arch/x86/um/Kconfig +++ b/arch/x86/um/Kconfig @@ -21,6 +21,7 @@ config 64BIT config X86_32 def_bool !64BIT select HAVE_AOUT + select ARCH_WANT_IPC_PARSE_VERSION config X86_64 def_bool 64BIT -- cgit v1.2.3 From 9429ec96c2718c0d1e3317cf60a87a0405223814 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 16 Aug 2012 20:15:05 +0200 Subject: um: Preinclude include/linux/kern_levels.h The userspace part of UML uses the asm-offsets.h generator mechanism to create definitions for UM_KERN_ that match the in-kernel KERN_ constant definitions. As of commit 04d2c8c83d0e3ac5f78aeede51babb3236200112 ("printk: convert the format for KERN_ to a 2 byte pattern"), KERN_ is no longer expanded to the literal '""', but to '"\001" "LEVEL"', i.e. it contains two parts. However, the combo of DEFINE_STR() in arch/x86/um/shared/sysdep/kernel-offsets.h and sed-y in Kbuild doesn't support string literals consisting of multiple parts. Hence for all UM_KERN_ definitions, only the SOH character is retained in the actual definition, while the remainder ends up in the comment. E.g. in include/generated/asm-offsets.h we get #define UM_KERN_INFO "\001" /* "6" KERN_INFO */ instead of #define UM_KERN_INFO "\001" "6" /* KERN_INFO */ This causes spurious '^A' output in some kernel messages: Calibrating delay loop... 4640.76 BogoMIPS (lpj=23203840) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 ^AChecking that host ptys support output SIGIO...Yes ^AChecking that host ptys support SIGIO on close...No, enabling workaround ^AUsing 2.6 host AIO NET: Registered protocol family 16 bio: create slab at 0 Switching to clocksource itimer To fix this: - Move the mapping from UM_KERN_ to KERN_ from arch/um/include/shared/common-offsets.h to arch/um/include/shared/user.h, which is preincluded for all userspace parts, - Preinclude include/linux/kern_levels.h for all userspace parts, to obtain the in-kernel KERN_ constant definitions. This doesn't violate the kernel/userspace separation, as include/linux/kern_levels.h is self-contained and doesn't expose any other kernel internals. - Remove the now unused STR() and DEFINE_STR() macros. Signed-off-by: Geert Uytterhoeven Signed-off-by: Richard Weinberger --- arch/um/include/shared/common-offsets.h | 10 ---------- arch/um/include/shared/user.h | 11 +++++++++++ arch/um/scripts/Makefile.rules | 2 +- arch/x86/um/shared/sysdep/kernel-offsets.h | 3 --- 4 files changed, 12 insertions(+), 14 deletions(-) diff --git a/arch/um/include/shared/common-offsets.h b/arch/um/include/shared/common-offsets.h index 40db8f71deae..2df313b6a586 100644 --- a/arch/um/include/shared/common-offsets.h +++ b/arch/um/include/shared/common-offsets.h @@ -7,16 +7,6 @@ DEFINE(UM_KERN_PAGE_MASK, PAGE_MASK); DEFINE(UM_KERN_PAGE_SHIFT, PAGE_SHIFT); DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC); -DEFINE_STR(UM_KERN_EMERG, KERN_EMERG); -DEFINE_STR(UM_KERN_ALERT, KERN_ALERT); -DEFINE_STR(UM_KERN_CRIT, KERN_CRIT); -DEFINE_STR(UM_KERN_ERR, KERN_ERR); -DEFINE_STR(UM_KERN_WARNING, KERN_WARNING); -DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE); -DEFINE_STR(UM_KERN_INFO, KERN_INFO); -DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG); -DEFINE_STR(UM_KERN_CONT, KERN_CONT); - DEFINE(UM_ELF_CLASS, ELF_CLASS); DEFINE(UM_ELFCLASS32, ELFCLASS32); DEFINE(UM_ELFCLASS64, ELFCLASS64); diff --git a/arch/um/include/shared/user.h b/arch/um/include/shared/user.h index 4fa82c055aab..cef068563336 100644 --- a/arch/um/include/shared/user.h +++ b/arch/um/include/shared/user.h @@ -26,6 +26,17 @@ extern void panic(const char *fmt, ...) __attribute__ ((format (printf, 1, 2))); +/* Requires preincluding include/linux/kern_levels.h */ +#define UM_KERN_EMERG KERN_EMERG +#define UM_KERN_ALERT KERN_ALERT +#define UM_KERN_CRIT KERN_CRIT +#define UM_KERN_ERR KERN_ERR +#define UM_KERN_WARNING KERN_WARNING +#define UM_KERN_NOTICE KERN_NOTICE +#define UM_KERN_INFO KERN_INFO +#define UM_KERN_DEBUG KERN_DEBUG +#define UM_KERN_CONT KERN_CONT + #ifdef UML_CONFIG_PRINTK extern int printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 2))); diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index d50270d26b42..15889df9b466 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -8,7 +8,7 @@ USER_OBJS += $(filter %_user.o,$(obj-y) $(obj-m) $(USER_SINGLE_OBJS)) USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file)) $(USER_OBJS:.o=.%): \ - c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) -include user.h $(CFLAGS_$(basetarget).o) + c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) -include $(srctree)/include/linux/kern_levels.h -include user.h $(CFLAGS_$(basetarget).o) # These are like USER_OBJS but filter USER_CFLAGS through unprofile instead of # using it directly. diff --git a/arch/x86/um/shared/sysdep/kernel-offsets.h b/arch/x86/um/shared/sysdep/kernel-offsets.h index 5868526b5eef..46a9df99f3c5 100644 --- a/arch/x86/um/shared/sysdep/kernel-offsets.h +++ b/arch/x86/um/shared/sysdep/kernel-offsets.h @@ -7,9 +7,6 @@ #define DEFINE(sym, val) \ asm volatile("\n->" #sym " %0 " #val : : "i" (val)) -#define STR(x) #x -#define DEFINE_STR(sym, val) asm volatile("\n->" #sym " " STR(val) " " #val: : ) - #define BLANK() asm volatile("\n->" : : ) #define OFFSET(sym, str, mem) \ -- cgit v1.2.3 From a3cff128c970da8400875c8893d68ac735e783fb Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 24 Sep 2012 04:42:59 +0000 Subject: smsc75xx: fix resume after device reset On some systems this device fails to properly resume after suspend, this patch fixes it by running the usbnet_resume handler. I suspect this also fixes this bug: http://code.google.com/p/chromium-os/issues/detail?id=31871 Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index f5ab6e613ec8..376143e8a1aa 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1253,6 +1253,7 @@ static struct usb_driver smsc75xx_driver = { .probe = usbnet_probe, .suspend = usbnet_suspend, .resume = usbnet_resume, + .reset_resume = usbnet_resume, .disconnect = usbnet_disconnect, .disable_hub_initiated_lpm = 1, }; -- cgit v1.2.3 From b629820d18fa65cc598390e4b9712fd5f83ee693 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 25 Sep 2012 10:17:42 +0000 Subject: net: phy: smsc: Implement PHY config_init for LAN87xx The LAN8710/LAN8720 chips do have broken the "FlexPWR" smart power-saving capability. Enabling it leads to the PHY not being able to detect Link when cold-started without cable connected. Thus, make sure this is disabled. Signed-off-by: Marek Vasut Cc: Christian Hohnstaedt Cc: David S. Miller Cc: Fabio Estevam Cc: Giuseppe Cavallaro Cc: Otavio Salvador Acked-by: Otavio Salvador Signed-off-by: David S. Miller --- drivers/net/phy/smsc.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 6d6192316b30..88e3991464e7 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -56,6 +56,32 @@ static int smsc_phy_config_init(struct phy_device *phydev) return smsc_phy_ack_interrupt (phydev); } +static int lan87xx_config_init(struct phy_device *phydev) +{ + /* + * Make sure the EDPWRDOWN bit is NOT set. Setting this bit on + * LAN8710/LAN8720 PHY causes the PHY to misbehave, likely due + * to a bug on the chip. + * + * When the system is powered on with the network cable being + * disconnected all the way until after ifconfig ethX up is + * issued for the LAN port with this PHY, connecting the cable + * afterwards does not cause LINK change detection, while the + * expected behavior is the Link UP being detected. + */ + int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + if (rc < 0) + return rc; + + rc &= ~MII_LAN83C185_EDPWRDOWN; + + rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, rc); + if (rc < 0) + return rc; + + return smsc_phy_ack_interrupt(phydev); +} + static int lan911x_config_init(struct phy_device *phydev) { return smsc_phy_ack_interrupt(phydev); @@ -162,7 +188,7 @@ static struct phy_driver smsc_phy_driver[] = { /* basic functions */ .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .config_init = smsc_phy_config_init, + .config_init = lan87xx_config_init, /* IRQ related */ .ack_interrupt = smsc_phy_ack_interrupt, -- cgit v1.2.3 From fd51790949edbbd17633689d4e19fe26d8447764 Mon Sep 17 00:00:00 2001 From: J. Bruce Fields Date: Tue, 18 Sep 2012 16:35:51 -0400 Subject: trivial select_parent documentation fix "Search list for X" sounds like you're trying to find X on a list. Signed-off-by: J. Bruce Fields Signed-off-by: Linus Torvalds --- fs/dcache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/dcache.c b/fs/dcache.c index 16521a9f2038..0364af2311f4 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1141,7 +1141,7 @@ rename_retry: EXPORT_SYMBOL(have_submounts); /* - * Search the dentry child list for the specified parent, + * Search the dentry child list of the specified parent, * and move any unused dentries to the end of the unused * list for prune_dcache(). We descend to the next level * whenever the d_subdirs list is non-empty and continue -- cgit v1.2.3 From 64f605c77408ad3aaff025e849d2e42cad9687e3 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 26 Sep 2012 07:22:02 +0000 Subject: bnx2: Clean up remaining iounmap commit c0357e975afdbbedab5c662d19bef865f02adc17 modified bnx2 to switch from using ioremap/iounmap to pci_iomap/pci_iounmap. They missed a spot in the error path of bnx2_init_one though. This patch just cleans that up. Signed-off-by: Neil Horman CC: Michael Chan CC: "David S. Miller" Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 79cebd8525ce..e48312f2305d 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -8564,7 +8564,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; error: - iounmap(bp->regview); + pci_iounmap(pdev, bp->regview); pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); -- cgit v1.2.3 From 68b3f28c11bf896be32ad2a2e151aaa5f4a7c98e Mon Sep 17 00:00:00 2001 From: Narendra K Date: Tue, 25 Sep 2012 07:53:19 +0000 Subject: qlcnic: Fix scheduling while atomic bug In the device close path, 'qlcnic_fw_destroy_ctx' and 'qlcnic_poll_rsp' call msleep. But 'qlcnic_fw_destroy_ctx' and 'qlcnic_poll_rsp' are called with 'adapter->tx_clean_lock' spin lock held resulting in scheduling while atomic bug causing the following trace. I observed that the commit 012dc19a45b2b9cc2ebd14aaa401cf782c2abba4 from John Fastabend addresses a similar issue in ixgbevf driver. Adopting the same approach used in the commit, this patch uses mdelay to address the issue. [79884.999115] BUG: scheduling while atomic: ip/30846/0x00000002 [79885.005562] INFO: lockdep is turned off. [79885.009958] Modules linked in: qlcnic fuse nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE bnep bluetooth rfkill ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables iptable_nat nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables dcdbas coretemp kvm_intel kvm iTCO_wdt ixgbe iTCO_vendor_support crc32c_intel ghash_clmulni_intel nfsd microcode sb_edac pcspkr edac_core dca bnx2x shpchp auth_rpcgss nfs_acl lpc_ich mfd_core mdio lockd libcrc32c wmi acpi_pad acpi_power_meter sunrpc uinput sd_mod sr_mod cdrom crc_t10dif ahci libahci libata megaraid_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod [last unloaded: qlcnic] [79885.083608] Pid: 30846, comm: ip Tainted: G W O 3.6.0-rc7+ #1 [79885.090805] Call Trace: [79885.093569] [] __schedule_bug+0x68/0x76 [79885.099699] [] __schedule+0x99e/0xa00 [79885.105634] [] schedule+0x29/0x70 [79885.111186] [] schedule_timeout+0x16f/0x350 [79885.117724] [] ? init_object+0x4a/0x90 [79885.123770] [] ? __internal_add_timer+0x140/0x140 [79885.130873] [] schedule_timeout_uninterruptible+0x1e/0x20 [79885.138773] [] msleep+0x20/0x30 [79885.144159] [] qlcnic_issue_cmd+0xef/0x290 [qlcnic] [79885.151478] [] qlcnic_fw_cmd_destroy_rx_ctx+0x55/0x90 [qlcnic] [79885.159868] [] qlcnic_fw_destroy_ctx+0x2d/0xa0 [qlcnic] [79885.167576] [] __qlcnic_down+0x11d/0x180 [qlcnic] [79885.174708] [] qlcnic_close+0x18/0x20 [qlcnic] [79885.181547] [] __dev_close_many+0x95/0xe0 [79885.187899] [] __dev_close+0x38/0x50 [79885.193761] [] __dev_change_flags+0xa1/0x180 [79885.200419] [] dev_change_flags+0x28/0x70 [79885.206779] [] do_setlink+0x378/0xa00 [79885.212731] [] ? nla_parse+0x31/0xe0 [79885.218612] [] rtnl_newlink+0x37e/0x560 [79885.224768] [] ? selinux_capable+0x39/0x50 [79885.231217] [] ? security_capable+0x18/0x20 [79885.237765] [] rtnetlink_rcv_msg+0x114/0x2f0 [79885.244412] [] ? rtnl_lock+0x17/0x20 [79885.250280] [] ? rtnl_lock+0x17/0x20 [79885.256148] [] ? __rtnl_unlock+0x20/0x20 [79885.262413] [] netlink_rcv_skb+0xa1/0xb0 [79885.268661] [] rtnetlink_rcv+0x25/0x40 [79885.274727] [] netlink_unicast+0x19d/0x220 [79885.281146] [] netlink_sendmsg+0x305/0x3f0 [79885.287595] [] ? sock_update_classid+0x148/0x2e0 [79885.294650] [] sock_sendmsg+0xbc/0xf0 [79885.300600] [] __sys_sendmsg+0x3ac/0x3c0 [79885.306853] [] ? up_read+0x23/0x40 [79885.312510] [] ? do_page_fault+0x2bc/0x570 [79885.318968] [] ? sys_brk+0x44/0x150 [79885.324715] [] ? fget_light+0x24c/0x520 [79885.330875] [] sys_sendmsg+0x49/0x90 [79885.336707] [] system_call_fastpath+0x16/0x1b Signed-off-by: Narendra K Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index b8ead696141e..2a179d087207 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -15,7 +15,7 @@ qlcnic_poll_rsp(struct qlcnic_adapter *adapter) do { /* give atleast 1ms for firmware to respond */ - msleep(1); + mdelay(1); if (++timeout > QLCNIC_OS_CRB_RETRY_COUNT) return QLCNIC_CDRP_RSP_TIMEOUT; @@ -601,7 +601,7 @@ void qlcnic_fw_destroy_ctx(struct qlcnic_adapter *adapter) qlcnic_fw_cmd_destroy_tx_ctx(adapter); /* Allow dma queues to drain after context reset */ - msleep(20); + mdelay(20); } } -- cgit v1.2.3 From bc9259a8bae9e814fc1f775a1b3effa13e6ad330 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Thu, 27 Sep 2012 04:11:00 +0000 Subject: inetpeer: fix token initialization When jiffies wraps around (for example, 5 minutes after the boot, see INITIAL_JIFFIES) and peer has just been created, now - peer->rate_last can be < XRLIM_BURST_FACTOR * timeout, so token is not set to the maximum value, thus some icmp packets can be unexpectedly dropped. Fix this case by initializing last_rate to 60 seconds in the past. Signed-off-by: Nicolas Dichtel Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/inetpeer.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c index e1e0a4e8fd34..c7527f6b9ad9 100644 --- a/net/ipv4/inetpeer.c +++ b/net/ipv4/inetpeer.c @@ -510,7 +510,10 @@ relookup: secure_ipv6_id(daddr->addr.a6)); p->metrics[RTAX_LOCK-1] = INETPEER_METRICS_NEW; p->rate_tokens = 0; - p->rate_last = 0; + /* 60*HZ is arbitrary, but chosen enough high so that the first + * calculation of tokens is at its maximum. + */ + p->rate_last = jiffies - 60*HZ; INIT_LIST_HEAD(&p->gc_list); /* Link the node. */ -- cgit v1.2.3 From 8dce30c89113e314d29d3b8f362aadff8087fccb Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 27 Sep 2012 10:26:01 +0200 Subject: ALSA: snd-usb: fix next_packet_size calls for pause case Also fix the calls to next_packet_size() for the pause case. This was missed in 245baf983 ("ALSA: snd-usb: fix calls to next_packet_size"). Signed-off-by: Daniel Mack Reviewed-by: Takashi Iwai Reported-and-tested-by: Christian Tefzer Cc: stable@kernel.org [ Taking directly because Takashi is on vacation - Linus ] Signed-off-by: Linus Torvalds --- sound/usb/endpoint.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index d6e2bb49c59c..060dccb9ec75 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -197,7 +197,13 @@ static void prepare_outbound_urb(struct snd_usb_endpoint *ep, /* no data provider, so send silence */ unsigned int offs = 0; for (i = 0; i < ctx->packets; ++i) { - int counts = ctx->packet_size[i]; + int counts; + + if (ctx->packet_size[i]) + counts = ctx->packet_size[i]; + else + counts = snd_usb_endpoint_next_packet_size(ep); + urb->iso_frame_desc[i].offset = offs * ep->stride; urb->iso_frame_desc[i].length = counts * ep->stride; offs += counts; -- cgit v1.2.3 From df555b665367f9de6c04826acc482096f17c243d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 27 Sep 2012 19:04:21 +0000 Subject: netdev: octeon: fix return value check in octeon_mgmt_init_phy() In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/octeon/octeon_mgmt.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c index c42bbb16cdae..a688a2ddcfd6 100644 --- a/drivers/net/ethernet/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/octeon/octeon_mgmt.c @@ -722,10 +722,8 @@ static int octeon_mgmt_init_phy(struct net_device *netdev) octeon_mgmt_adjust_link, 0, PHY_INTERFACE_MODE_MII); - if (IS_ERR(p->phydev)) { - p->phydev = NULL; + if (!p->phydev) return -1; - } phy_start_aneg(p->phydev); -- cgit v1.2.3 From 99a1300e1d84709f419182bb5189760e78234882 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 28 Sep 2012 14:35:31 +0200 Subject: thp: avoid VM_BUG_ON page_count(page) false positives in __collapse_huge_page_copy Speculative cache pagecache lookups can elevate the refcount from under us, so avoid the false positive. If the refcount is < 2 we'll be notified by a VM_BUG_ON in put_page_testzero as there are two put_page(src_page) in a row before returning from this function. Signed-off-by: Andrea Arcangeli Reviewed-by: Rik van Riel Reviewed-by: Johannes Weiner Cc: Hugh Dickins Cc: Mel Gorman Cc: Petr Holasek Cc: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 1 - 1 file changed, 1 deletion(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 57c4b9309015..141dbb695097 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -1811,7 +1811,6 @@ static void __collapse_huge_page_copy(pte_t *pte, struct page *page, src_page = pte_page(pteval); copy_user_highpage(page, src_page, address, vma); VM_BUG_ON(page_mapcount(src_page) != 1); - VM_BUG_ON(page_count(src_page) != 2); release_pte_page(src_page); /* * ptl mostly unnecessary, but preempt has to -- cgit v1.2.3