From eef3dc34a1e0b01d53328b88c25237bcc7323777 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Wed, 17 Oct 2018 17:54:00 -0700 Subject: ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup When building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x38b3c): Section mismatch in reference from the function omap44xx_prm_late_init() to the function .init.text:omap44xx_prm_enable_io_wakeup() The function omap44xx_prm_late_init() references the function __init omap44xx_prm_enable_io_wakeup(). This is often because omap44xx_prm_late_init lacks a __init annotation or the annotation of omap44xx_prm_enable_io_wakeup is wrong. Remove the __init annotation from omap44xx_prm_enable_io_wakeup so there is no more mismatch. Signed-off-by: Nathan Chancellor Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/prm44xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 7b95729e8359..38a1be6c3694 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -351,7 +351,7 @@ static void omap44xx_prm_reconfigure_io_chain(void) * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and * omap44xx_prm_reconfigure_io_chain() must be called. No return value. */ -static void __init omap44xx_prm_enable_io_wakeup(void) +static void omap44xx_prm_enable_io_wakeup(void) { s32 inst = omap4_prmst_get_prm_dev_inst(); -- cgit v1.2.3 From 13682e524167cbd7e2a26c5e91bec765f0f96273 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Wed, 17 Oct 2018 11:18:30 +0200 Subject: arm64: dts: rockchip: remove vdd_log from rock960 to fix a stability issues When the performance governor is set as default, the rock960 hangs around one minute after booting, whatever the activity is (idle, key pressed, loaded, ...). Based on the commit log found at https://patchwork.kernel.org/patch/10092377/ "vdd_log has no consumer and therefore will not be set to a specific voltage. Still the PWM output pin gets configured and thence the vdd_log output voltage will changed from it's default. Depending on the idle state of the PWM this will slightly over or undervoltage the logic supply of the RK3399 and cause instability with GbE (undervoltage) and PCIe (overvoltage). Since the default value set by a voltage divider is the correct supply voltage and we don't need to change it during runtime we remove the rail from the devicetree completely so the PWM pin will not be configured." After removing the vdd-log from the rock960's specific DT, the board does no longer hang and shows a stable behavior. Apply the same change for the rock960 by removing the vdd-log from the DT. Fixes: 874846f1fccd ("arm64: dts: rockchip: add 96boards RK3399 Ficus board") Cc: stable@vger.kernel.org Tested-by: Manivannan Sadhasivam Signed-off-by: Daniel Lezcano Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index 6c8c4ab044aa..56abbb08c133 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -57,18 +57,6 @@ regulator-always-on; vin-supply = <&vcc_sys>; }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 0>; - regulator-name = "vdd_log"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - }; &cpu_l0 { -- cgit v1.2.3 From 7900f06c3feedbe74d79f28a0d062dbf11fd10bf Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Wed, 19 Sep 2018 11:31:40 -0400 Subject: MAINTAINERS: Remove self from Broadcom SoCs I'm leaving Broadcom, and will no longer have access to hardware and documentation necessary to be effective in a maintainership role. Signed-off-by: Jon Mason Signed-off-by: Florian Fainelli --- MAINTAINERS | 2 -- 1 file changed, 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f4855974f325..f3ea3287195d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2869,7 +2869,6 @@ F: arch/mips/include/asm/mach-bcm47xx/* BROADCOM BCM5301X ARM ARCHITECTURE M: Hauke Mehrtens M: Rafał Miłecki -M: Jon Mason M: bcm-kernel-feedback-list@broadcom.com L: linux-arm-kernel@lists.infradead.org S: Maintained @@ -3015,7 +3014,6 @@ F: drivers/net/ethernet/broadcom/genet/ BROADCOM IPROC ARM ARCHITECTURE M: Ray Jui M: Scott Branden -M: Jon Mason M: bcm-kernel-feedback-list@broadcom.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://github.com/broadcom/cygnus-linux.git -- cgit v1.2.3 From e7f4ffffa972db4820c23ff9831a6a4f3f6d8cc5 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sun, 28 Oct 2018 15:13:48 -0500 Subject: ARM: dts: am3517: Fix pinmuxing for CD on MMC1 The MMC1 is active low, not active high. For some reason, this worked with different combination of U-Boot and kernels, but it's supposed to be active low and is currently broken. Fixes: cfaa856a2510 ("ARM: dts: am3517: Add pinmuxing, CD and WP for MMC1") #kernel 4.18+ Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am3517-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index d4d33cd7adad..1e2bb68231ad 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -228,7 +228,7 @@ vmmc-supply = <&vmmc_fixed>; bus-width = <4>; wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ - cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */ + cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */ }; &mmc3 { -- cgit v1.2.3 From 6809564d64ff1301d44c13334cc0e8369e825a20 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sun, 28 Oct 2018 15:28:32 -0500 Subject: ARM: dts: LogicPD Torpedo: Fix mmc3_dat1 interrupt When the Torpedo was first introduced back at Kernel 4.2, the interrupt extended flag has been set incorrectly. It was subsequently moved, so this patch corrects Kernel 4.18+ Fixes: a38867305203 ("ARM: dts: Move move WiFi bindings to logicpd-torpedo-37xx-devkit") # v4.18+ Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 9d5d53fbe9c0..c39cf2ca54da 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -35,7 +35,7 @@ * jumpering combinations for the long run. */ &mmc3 { - interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; + interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>; pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>; pinctrl-names = "default"; vmmc-supply = <&wl12xx_vmmc>; -- cgit v1.2.3 From 3d8b804bc528d3720ec0c39c212af92dafaf6e84 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sun, 28 Oct 2018 15:29:27 -0500 Subject: ARM: dts: logicpd-somlv: Fix interrupt on mmc3_dat1 The interrupt on mmc3_dat1 is wrong which prevents this from appearing in /proc/interrupts. Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") #Kernel 4.9+ Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-som-lv.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index ac343330d0c8..98b682a8080c 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -129,7 +129,7 @@ }; &mmc3 { - interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; + interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>; pinctrl-0 = <&mmc3_pins &wl127x_gpio>; pinctrl-names = "default"; vmmc-supply = <&wl12xx_vmmc>; -- cgit v1.2.3 From 419b194cdedc76d0d3cd5b0900db0fa8177c4a52 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sun, 28 Oct 2018 15:34:21 -0500 Subject: ARM: dts: am3517-som: Fix WL127x Wifi interrupt At the same time the AM3517 EVM was gaining WiFi support, separate patches were introduced to move the interrupt from HIGH to RISING. Because they overlapped, this was not done to the AM3517-EVM. This patch fixes Kernel 4.19+ Fixes: 6bf5e3410f19 ("ARM: dts: am3517-som: Add WL127x Wifi") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am3517-som.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index dae6e458e59f..b1c988eed87c 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -163,7 +163,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */ + interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; -- cgit v1.2.3 From cec83ff1241ec98113a19385ea9e9cfa9aa4125b Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 7 Nov 2018 22:30:31 +0100 Subject: ARM: OMAP1: ams-delta: Fix possible use of uninitialized field While playing with initialization order of modem device, it has been discovered that under some circumstances (early console init, I believe) its .pm() callback may be called before the uart_port->private_data pointer is initialized from plat_serial8250_port->private_data, resulting in NULL pointer dereference. Fix it by checking for uninitialized pointer before using it in modem_pm(). Fixes: aabf31737a6a ("ARM: OMAP1: ams-delta: update the modem to use regulator API") Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 3d191fd52910..17886744dbe6 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -750,6 +750,9 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) struct modem_private_data *priv = port->private_data; int ret; + if (!priv) + return; + if (IS_ERR(priv->regulator)) return; -- cgit v1.2.3 From 8588eac3ff66e77fb681591714fd76da3a4da80d Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Thu, 27 Sep 2018 10:31:46 +0530 Subject: arm64: dts: ti: k3-am654: Fix wakeup_uart reg address cbass_wakeup interconnect which is the parent of wakeup_uart node defines address-cells=1 and size-cells=1, therefore fix up reg property of wakeup_uart node accordingly. Otherwise, this UART instance fails to probe if enabled. Fixes: 4201af2544b3 ("arm64: dts: ti: am654: Add uart nodes") Signed-off-by: Vignesh R Reviewed-by: Lokesh Vutla Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index affc3c309353..8d7b47f9dfbf 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -36,7 +36,7 @@ wkup_uart0: serial@42300000 { compatible = "ti,am654-uart"; - reg = <0x00 0x42300000 0x00 0x100>; + reg = <0x42300000 0x100>; reg-shift = <2>; reg-io-width = <4>; interrupts = ; -- cgit v1.2.3 From 5f8d3ab136d0ccb59c4d628d8f85e0d8f2761d07 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 2 Nov 2018 14:45:32 -0700 Subject: arm64: dts: sdm845-mtp: Reserve reserved gpios With the introduction of commit 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning") the gpiolib will attempt to read the direction of all pins, which triggers a read from protected register regions. The pins 0 through 3 and 81 through 84 are protected, so mark these as reserved. Signed-off-by: Bjorn Andersson Reviewed-by: Stephen Boyd Reviewed-by: Linus Walleij Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index eedfaf8922e2..d667eee4e6d0 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -352,6 +352,10 @@ status = "okay"; }; +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; +}; + &uart9 { status = "okay"; }; -- cgit v1.2.3 From 9134586715e389fe90d9d28cb37a668f374d686a Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 29 Oct 2018 22:45:54 -0700 Subject: arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP GPIOs 0 through 3 and 81 through 84 are configured to not be accessible from the application CPUs. Mark them as reserved to allow the MSM8998 MTP to boot after the introduction of 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning"). Signed-off-by: Bjorn Andersson Reviewed-by: Jeffrey Hugo Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index b4276da1fb0d..11fd1fe8bdb5 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -241,3 +241,7 @@ }; }; }; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; +}; -- cgit v1.2.3 From c1d91f86a1b4c9c05854d59c6a0abd5d0f75b849 Mon Sep 17 00:00:00 2001 From: Christoph Muellner Date: Tue, 13 Nov 2018 11:25:35 +0100 Subject: arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou. This patch fixes the wrong polarity setting for the PCIe host driver's pre-reset pin for rk3399-puma-haikou. Without this patch link training will most likely fail. Fixes: 60fd9f72ce8a ("arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM") Cc: stable@vger.kernel.org Signed-off-by: Christoph Muellner Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 2dceeea29b83..1e6a71066c16 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -153,7 +153,7 @@ }; &pcie0 { - ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>; + ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; num-lanes = <4>; pinctrl-names = "default"; pinctrl-0 = <&pcie_clkreqn_cpm>; -- cgit v1.2.3 From 672e60b72bbe7aace88721db55b380b6a51fb8f9 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sun, 18 Nov 2018 20:03:02 +0100 Subject: ARM: dts: rockchip: Remove @0 from the veyron memory node The Coreboot version on veyron ChromeOS devices seems to ignore memory@0 nodes when updating the available memory and instead inserts another memory node without the address. This leads to 4GB systems only ever be using 2GB as the memory@0 node takes precedence. So remove the @0 for veyron devices. Fixes: 0b639b815f15 ("ARM: dts: rockchip: Add missing unit name to memory nodes in rk3288 boards") Cc: stable@vger.kernel.org Reported-by: Heikki Lindholm Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron.dtsi | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 2075120cfc4d..d8bf939a3aff 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -10,7 +10,11 @@ #include "rk3288.dtsi" / { - memory@0 { + /* + * The default coreboot on veyron devices ignores memory@0 nodes + * and would instead create another memory node. + */ + memory { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; -- cgit v1.2.3 From 512cab3e7e0be11234f965d9898936dce2325382 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 10 Nov 2018 15:53:59 -0200 Subject: ARM: dts: imx51-zii-rdu1: Remove EEPROM node The EEPROM under I2C2 was put by mistake in the dts. Remove it as it is not really present on the real hardware. Fixes: ceef0396f367 ("ARM: dts: imx: add ZII RDU1 board") Reported-by: Chris Healy Signed-off-by: Fabio Estevam Reviewed-by: Chris Healy Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-zii-rdu1.dts | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index e45a15ceb94b..69d753cac89a 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -492,12 +492,6 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - eeprom@50 { - compatible = "atmel,24c04"; - pagesize = <16>; - reg = <0x50>; - }; - hpa1: amp@60 { compatible = "ti,tpa6130a2"; reg = <0x60>; -- cgit v1.2.3 From 4ab7ca092c3c7ac8b16aa28eba723a8868f82f14 Mon Sep 17 00:00:00 2001 From: Romain Izard Date: Tue, 20 Nov 2018 17:57:37 +0100 Subject: ARM: dts: at91: sama5d2: use the divided clock for SMC The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two different clocks for the peripherals in the SoC. The Static Memory controller is connected to the divided master clock. Unfortunately, the device tree does not correctly show this and uses the master clock directly. This clock is then used by the code for the NAND controller to calculate the timings for the controller, and we end up with slow NAND Flash access. Fix the device tree, and the performance of Flash access is improved. Signed-off-by: Romain Izard Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/sama5d2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 843052f14f1c..dd0dda6ed44b 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -314,7 +314,7 @@ 0x1 0x0 0x60000000 0x10000000 0x2 0x0 0x70000000 0x10000000 0x3 0x0 0x80000000 0x10000000>; - clocks = <&mck>; + clocks = <&h32ck>; status = "disabled"; nand_controller: nand-controller { -- cgit v1.2.3 From 58a0afbf4c99ac355df16773af835b919b9432ee Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 10:35:12 +0100 Subject: ARM: davinci: da8xx: define gpio interrupts as separate resources Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") the davinci GPIO driver fails to probe if we boot in legacy mode from any of the board files. Since the driver now expects every interrupt to be defined as a separate resource, split the definition of IRQ resources instead of having a single continuous interrupt range. Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/devices-da8xx.c | 40 +++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 1fd3619f6a09..cf78da5ab054 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -701,6 +701,46 @@ static struct resource da8xx_gpio_resources[] = { }, { /* interrupt */ .start = IRQ_DA8XX_GPIO0, + .end = IRQ_DA8XX_GPIO0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_GPIO1, + .end = IRQ_DA8XX_GPIO1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_GPIO2, + .end = IRQ_DA8XX_GPIO2, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_GPIO3, + .end = IRQ_DA8XX_GPIO3, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_GPIO4, + .end = IRQ_DA8XX_GPIO4, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_GPIO5, + .end = IRQ_DA8XX_GPIO5, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_GPIO6, + .end = IRQ_DA8XX_GPIO6, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_GPIO7, + .end = IRQ_DA8XX_GPIO7, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_GPIO8, .end = IRQ_DA8XX_GPIO8, .flags = IORESOURCE_IRQ, }, -- cgit v1.2.3 From 193c04374e281a56c7d4f96e66d329671945bebe Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 10:35:13 +0100 Subject: ARM: davinci: dm365: define gpio interrupts as separate resources Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") the davinci GPIO driver fails to probe if we boot in legacy mode from any of the board files. Since the driver now expects every interrupt to be defined as a separate resource, split the definition of IRQ resources instead of having a single continuous interrupt range. Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm365.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index abcf2a5ed89b..42665914166a 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -267,6 +267,41 @@ static struct resource dm365_gpio_resources[] = { }, { /* interrupt */ .start = IRQ_DM365_GPIO0, + .end = IRQ_DM365_GPIO0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO1, + .end = IRQ_DM365_GPIO1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO2, + .end = IRQ_DM365_GPIO2, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO3, + .end = IRQ_DM365_GPIO3, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO4, + .end = IRQ_DM365_GPIO4, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO5, + .end = IRQ_DM365_GPIO5, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO6, + .end = IRQ_DM365_GPIO6, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO7, .end = IRQ_DM365_GPIO7, .flags = IORESOURCE_IRQ, }, -- cgit v1.2.3 From 2c9c83491f30afbce25796e185cd4d5e36080e31 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 10:35:14 +0100 Subject: ARM: davinci: dm646x: define gpio interrupts as separate resources Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") the davinci GPIO driver fails to probe if we boot in legacy mode from any of the board files. Since the driver now expects every interrupt to be defined as a separate resource, split the definition of IRQ resources instead of having a single continuous interrupt range. Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm646x.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 6bd2ed069d0d..d9b93e2806d2 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -442,6 +442,16 @@ static struct resource dm646x_gpio_resources[] = { }, { /* interrupt */ .start = IRQ_DM646X_GPIOBNK0, + .end = IRQ_DM646X_GPIOBNK0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_GPIOBNK1, + .end = IRQ_DM646X_GPIOBNK1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_GPIOBNK2, .end = IRQ_DM646X_GPIOBNK2, .flags = IORESOURCE_IRQ, }, -- cgit v1.2.3 From 27db7baab640ea28d7994eda943fef170e347081 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 10:35:15 +0100 Subject: ARM: davinci: dm355: define gpio interrupts as separate resources Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") the davinci GPIO driver fails to probe if we boot in legacy mode from any of the board files. Since the driver now expects every interrupt to be defined as a separate resource, split the definition of IRQ resources instead of having a single continuous interrupt range. Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm355.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 9f7d38d12c88..2b0f5d97ab7c 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -548,6 +548,36 @@ static struct resource dm355_gpio_resources[] = { }, { /* interrupt */ .start = IRQ_DM355_GPIOBNK0, + .end = IRQ_DM355_GPIOBNK0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM355_GPIOBNK1, + .end = IRQ_DM355_GPIOBNK1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM355_GPIOBNK2, + .end = IRQ_DM355_GPIOBNK2, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM355_GPIOBNK3, + .end = IRQ_DM355_GPIOBNK3, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM355_GPIOBNK4, + .end = IRQ_DM355_GPIOBNK4, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM355_GPIOBNK5, + .end = IRQ_DM355_GPIOBNK5, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM355_GPIOBNK6, .end = IRQ_DM355_GPIOBNK6, .flags = IORESOURCE_IRQ, }, -- cgit v1.2.3 From adcf60ce14c8250761af9de907eb6c7d096c26d3 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 10:35:16 +0100 Subject: ARM: davinci: dm644x: define gpio interrupts as separate resources Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") the davinci GPIO driver fails to probe if we boot in legacy mode from any of the board files. Since the driver now expects every interrupt to be defined as a separate resource, split the definition of IRQ resources instead of having a single continuous interrupt range. Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm644x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 0720da7809a6..de1ec6dc01e9 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -492,6 +492,26 @@ static struct resource dm644_gpio_resources[] = { }, { /* interrupt */ .start = IRQ_GPIOBNK0, + .end = IRQ_GPIOBNK0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_GPIOBNK1, + .end = IRQ_GPIOBNK1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_GPIOBNK2, + .end = IRQ_GPIOBNK2, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_GPIOBNK3, + .end = IRQ_GPIOBNK3, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_GPIOBNK4, .end = IRQ_GPIOBNK4, .flags = IORESOURCE_IRQ, }, -- cgit v1.2.3 From 786a9ab1330169f2602238822b4df5d5c4c98f6c Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 10:35:17 +0100 Subject: gpio: davinci: restore a way to manually specify the GPIO base Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") broke the network support in legacy boot mode for da850-evm since we can no longer request the MDIO clock GPIO. Other boards may be broken too, which I haven't tested. The problem is in the fact that most board files still use the legacy GPIO API where lines are requested by numbers rather than descriptors. While this should be fixed eventually, in order to unbreak the board for now - provide a way to manually specify the GPIO base in platform data. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Acked-by: Linus Walleij Signed-off-by: Sekhar Nori --- drivers/gpio/gpio-davinci.c | 2 +- include/linux/platform_data/gpio-davinci.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c index 5c1564fcc24e..bdb29e51b417 100644 --- a/drivers/gpio/gpio-davinci.c +++ b/drivers/gpio/gpio-davinci.c @@ -258,7 +258,7 @@ static int davinci_gpio_probe(struct platform_device *pdev) chips->chip.set = davinci_gpio_set; chips->chip.ngpio = ngpio; - chips->chip.base = -1; + chips->chip.base = pdata->no_auto_base ? pdata->base : -1; #ifdef CONFIG_OF_GPIO chips->chip.of_gpio_n_cells = 2; diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h index f92a47e18034..a93841bfb9f7 100644 --- a/include/linux/platform_data/gpio-davinci.h +++ b/include/linux/platform_data/gpio-davinci.h @@ -17,6 +17,8 @@ #define __DAVINCI_GPIO_PLATFORM_H struct davinci_gpio_platform_data { + bool no_auto_base; + u32 base; u32 ngpio; u32 gpio_unbanked; }; -- cgit v1.2.3 From 45ed94b9e2d2e310fa7fb884b26080dfd4f0e31d Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 10:35:18 +0100 Subject: ARM: davinci: da850: set the GPIO base to 0 Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") broke the network support in legacy boot mode for da850-evm since we can no longer request the MDIO clock GPIO. We now have the option to specify the GPIO base manually for davinci, so add the relevant fields to platform data. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/da850.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 4528bbf0c861..e7b78df2bfef 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -719,7 +719,9 @@ int __init da850_register_vpif_capture(struct vpif_capture_config } static struct davinci_gpio_platform_data da850_gpio_platform_data = { - .ngpio = 144, + .no_auto_base = true, + .base = 0, + .ngpio = 144, }; int __init da850_register_gpio(void) -- cgit v1.2.3 From 133cd2e48305887709675847da1f6ee2b7363929 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 10:35:19 +0100 Subject: ARM: davinci: dm365: set the GPIO base to 0 Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") broke the GPIO support on DaVinci boards in legacy mode by allowing gpiolib to set the GPIO base automatically. DaVinci board files use the legacy GPIO API with hard-coded GPIO line numbers. Use the new fields in struct davinci_gpio_platform_data to manually set the GPIO base to 0. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm365.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 42665914166a..01fb2b0c82de 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -308,6 +308,8 @@ static struct resource dm365_gpio_resources[] = { }; static struct davinci_gpio_platform_data dm365_gpio_platform_data = { + .no_auto_base = true, + .base = 0, .ngpio = 104, .gpio_unbanked = 8, }; -- cgit v1.2.3 From fb9e7f0bba151281d7587c1262fae8bdf0497296 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 10:35:20 +0100 Subject: ARM: davinci: dm646x: set the GPIO base to 0 Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") broke the GPIO support on DaVinci boards in legacy mode by allowing gpiolib to set the GPIO base automatically. DaVinci board files use the legacy GPIO API with hard-coded GPIO line numbers. Use the new fields in struct davinci_gpio_platform_data to manually set the GPIO base to 0. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm646x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index d9b93e2806d2..7dc54b2a610f 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -458,6 +458,8 @@ static struct resource dm646x_gpio_resources[] = { }; static struct davinci_gpio_platform_data dm646x_gpio_platform_data = { + .no_auto_base = true, + .base = 0, .ngpio = 43, }; -- cgit v1.2.3 From a6ca633e13f888cbb0a92309a1e090818cffcc86 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 10:35:21 +0100 Subject: ARM: davinci: dm355: set the GPIO base to 0 Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") broke the GPIO support on DaVinci boards in legacy mode by allowing gpiolib to set the GPIO base automatically. DaVinci board files use the legacy GPIO API with hard-coded GPIO line numbers. Use the new fields in struct davinci_gpio_platform_data to manually set the GPIO base to 0. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm355.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 2b0f5d97ab7c..4c6e0bef4509 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -584,6 +584,8 @@ static struct resource dm355_gpio_resources[] = { }; static struct davinci_gpio_platform_data dm355_gpio_platform_data = { + .no_auto_base = true, + .base = 0, .ngpio = 104, }; -- cgit v1.2.3 From 55a891d0d0bd3db9303c580857147c37e2c76a5a Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 10:35:22 +0100 Subject: ARM: davinci: da830: set the GPIO base to 0 Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") broke the GPIO support on DaVinci boards in legacy mode by allowing gpiolib to set the GPIO base automatically. DaVinci board files use the legacy GPIO API with hard-coded GPIO line numbers. Use the new fields in struct davinci_gpio_platform_data to manually set the GPIO base to 0. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/da830.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 0bc5bd2665df..2cc9fe4c3a91 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -759,7 +759,9 @@ static struct davinci_id da830_ids[] = { }; static struct davinci_gpio_platform_data da830_gpio_platform_data = { - .ngpio = 128, + .no_auto_base = true, + .base = 0, + .ngpio = 128, }; int __init da830_register_gpio(void) -- cgit v1.2.3 From 27df7977099c2b8d32399cd1752f527c5a343dfa Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 10:35:23 +0100 Subject: ARM: davinci: dm644x: set the GPIO base to 0 Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") broke the GPIO support on DaVinci boards in legacy mode by allowing gpiolib to set the GPIO base automatically. DaVinci board files use the legacy GPIO API with hard-coded GPIO line numbers. Use the new fields in struct davinci_gpio_platform_data to manually set the GPIO base to 0. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm644x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index de1ec6dc01e9..38f92b7d413e 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -518,6 +518,8 @@ static struct resource dm644_gpio_resources[] = { }; static struct davinci_gpio_platform_data dm644_gpio_platform_data = { + .no_auto_base = true, + .base = 0, .ngpio = 71, }; -- cgit v1.2.3 From 7e76e65ce7e9405a9608e1b806be58a6cbf4a737 Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Thu, 29 Nov 2018 16:31:06 -0600 Subject: MAINTAINERS: Remove unused Qualcomm SoC mailing list This patch removes the linux-soc mailing list from the Qualcomm SoC entry. We use the linux-msm and there is no need to have the second one and this clears the list for use by others. Signed-off-by: Andy Gross Signed-off-by: Olof Johansson --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index f3ea3287195d..f412f5a2c66d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1922,7 +1922,6 @@ ARM/QUALCOMM SUPPORT M: Andy Gross M: David Brown L: linux-arm-msm@vger.kernel.org -L: linux-soc@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/soc/qcom/ F: arch/arm/boot/dts/qcom-*.dts -- cgit v1.2.3