From 1fd1c624362819ecc36db2458c6a972c48ae92d6 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Wed, 3 Jun 2009 07:26:58 +0000 Subject: drm/i915: Save/restore cursor state on suspend/resume. This may fix cursor corruption in X on resume, which would persist until the cursor was hidden and then shown again. V2: Also include the cursor control regs. Signed-off-by: Eric Anholt Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/i915_drv.h | 8 ++++++++ drivers/gpu/drm/i915/i915_suspend.c | 20 ++++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index c431fa54bbb5..fcaa5444daa0 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -285,6 +285,13 @@ typedef struct drm_i915_private { u8 saveDACMASK; u8 saveCR[37]; uint64_t saveFENCE[16]; + u32 saveCURACNTR; + u32 saveCURAPOS; + u32 saveCURABASE; + u32 saveCURBCNTR; + u32 saveCURBPOS; + u32 saveCURBBASE; + u32 saveCURSIZE; struct { struct drm_mm gtt_space; @@ -642,6 +649,7 @@ void i915_gem_detach_phys_object(struct drm_device *dev, void i915_gem_free_all_phys_object(struct drm_device *dev); int i915_gem_object_get_pages(struct drm_gem_object *obj); void i915_gem_object_put_pages(struct drm_gem_object *obj); +void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv); /* i915_gem_tiling.c */ void i915_gem_detect_bit_6_swizzle(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index ce8a21344a71..a98e2831ed31 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -295,6 +295,16 @@ int i915_save_state(struct drm_device *dev) i915_save_palette(dev, PIPE_B); dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT); + /* Cursor state */ + dev_priv->saveCURACNTR = I915_READ(CURACNTR); + dev_priv->saveCURAPOS = I915_READ(CURAPOS); + dev_priv->saveCURABASE = I915_READ(CURABASE); + dev_priv->saveCURBCNTR = I915_READ(CURBCNTR); + dev_priv->saveCURBPOS = I915_READ(CURBPOS); + dev_priv->saveCURBBASE = I915_READ(CURBBASE); + if (!IS_I9XX(dev)) + dev_priv->saveCURSIZE = I915_READ(CURSIZE); + /* CRT state */ dev_priv->saveADPA = I915_READ(ADPA); @@ -480,6 +490,16 @@ int i915_restore_state(struct drm_device *dev) I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR); I915_WRITE(DSPBADDR, I915_READ(DSPBADDR)); + /* Cursor state */ + I915_WRITE(CURAPOS, dev_priv->saveCURAPOS); + I915_WRITE(CURACNTR, dev_priv->saveCURACNTR); + I915_WRITE(CURABASE, dev_priv->saveCURABASE); + I915_WRITE(CURBPOS, dev_priv->saveCURBPOS); + I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR); + I915_WRITE(CURBBASE, dev_priv->saveCURBBASE); + if (!IS_I9XX(dev)) + I915_WRITE(CURSIZE, dev_priv->saveCURSIZE); + /* CRT state */ I915_WRITE(ADPA, dev_priv->saveADPA); -- cgit v1.2.3 From b962442e46a9340bdbc6711982c59ff0cc2b5afb Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Wed, 3 Jun 2009 07:27:35 +0000 Subject: drm/i915: Change GEM throttling to be 20ms like the comment says. keithp didn't like the original 20ms plan because a cooperative client could be starved by an uncooperative client. There may even have been problems with cooperative clients versus cooperative clients. So keithp changed throttle to just wait for the second to last seqno emitted by that client. It worked well, until we started getting more round-trips to the server due to DRI2 -- the server throttles in BlockHandler, and so if you did more than one round trip after finishing your frame, you'd end up unintentionally syncing to the swap. Fix this by keeping track of the client's requests, so the client can wait when it has an outstanding request over 20ms old. This should have non-starving behavior, good behavior in the presence of restarts, and less waiting. Improves high-settings openarena performance on my GM45 by 50%. Signed-off-by: Eric Anholt Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/i915_dma.c | 4 +-- drivers/gpu/drm/i915/i915_drv.h | 7 +++-- drivers/gpu/drm/i915/i915_gem.c | 69 ++++++++++++++++++++++++++++++++--------- 3 files changed, 61 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 53d544552625..0c222c28b8c1 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1273,8 +1273,7 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv) file_priv->driver_priv = i915_file_priv; - i915_file_priv->mm.last_gem_seqno = 0; - i915_file_priv->mm.last_gem_throttle_seqno = 0; + INIT_LIST_HEAD(&i915_file_priv->mm.request_list); return 0; } @@ -1311,6 +1310,7 @@ void i915_driver_lastclose(struct drm_device * dev) void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = dev->dev_private; + i915_gem_release(dev, file_priv); if (!drm_core_check_feature(dev, DRIVER_MODESET)) i915_mem_release(dev, file_priv, dev_priv->agp_heap); } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index fcaa5444daa0..e0fac5f62c69 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -498,13 +498,16 @@ struct drm_i915_gem_request { /** Time at which this request was emitted, in jiffies. */ unsigned long emitted_jiffies; + /** global list entry for this request */ struct list_head list; + + /** file_priv list entry for this request */ + struct list_head client_list; }; struct drm_i915_file_private { struct { - uint32_t last_gem_seqno; - uint32_t last_gem_throttle_seqno; + struct list_head request_list; } mm; }; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 39f5c658ef5e..3fbd8a0c40d1 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1481,14 +1481,19 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj) * Returned sequence numbers are nonzero on success. */ static uint32_t -i915_add_request(struct drm_device *dev, uint32_t flush_domains) +i915_add_request(struct drm_device *dev, struct drm_file *file_priv, + uint32_t flush_domains) { drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_file_private *i915_file_priv = NULL; struct drm_i915_gem_request *request; uint32_t seqno; int was_empty; RING_LOCALS; + if (file_priv != NULL) + i915_file_priv = file_priv->driver_priv; + request = drm_calloc(1, sizeof(*request), DRM_MEM_DRIVER); if (request == NULL) return 0; @@ -1515,6 +1520,12 @@ i915_add_request(struct drm_device *dev, uint32_t flush_domains) request->emitted_jiffies = jiffies; was_empty = list_empty(&dev_priv->mm.request_list); list_add_tail(&request->list, &dev_priv->mm.request_list); + if (i915_file_priv) { + list_add_tail(&request->client_list, + &i915_file_priv->mm.request_list); + } else { + INIT_LIST_HEAD(&request->client_list); + } /* Associate any objects on the flushing list matching the write * domain we're flushing with our flush. @@ -1664,6 +1675,7 @@ i915_gem_retire_requests(struct drm_device *dev) i915_gem_retire_request(dev, request); list_del(&request->list); + list_del(&request->client_list); drm_free(request, sizeof(*request), DRM_MEM_DRIVER); } else break; @@ -1977,7 +1989,7 @@ i915_gem_evict_something(struct drm_device *dev) i915_gem_flush(dev, obj->write_domain, obj->write_domain); - i915_add_request(dev, obj->write_domain); + i915_add_request(dev, NULL, obj->write_domain); obj = NULL; continue; @@ -2248,7 +2260,7 @@ try_again: i915_gem_flush(dev, I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS); - seqno = i915_add_request(dev, + seqno = i915_add_request(dev, NULL, I915_GEM_GPU_DOMAINS); if (seqno == 0) return -ENOMEM; @@ -2452,7 +2464,7 @@ i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj) /* Queue the GPU write cache flushing we need. */ i915_gem_flush(dev, 0, obj->write_domain); - seqno = i915_add_request(dev, obj->write_domain); + seqno = i915_add_request(dev, NULL, obj->write_domain); obj->write_domain = 0; i915_gem_object_move_to_active(obj, seqno); } @@ -3089,6 +3101,10 @@ i915_dispatch_gem_execbuffer(struct drm_device *dev, /* Throttle our rendering by waiting until the ring has completed our requests * emitted over 20 msec ago. * + * Note that if we were to use the current jiffies each time around the loop, + * we wouldn't escape the function with any frames outstanding if the time to + * render a frame was over 20ms. + * * This should get us reasonable parallelism between CPU and GPU but also * relatively low latency when blocking on a particular request to finish. */ @@ -3097,15 +3113,25 @@ i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file_priv) { struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv; int ret = 0; - uint32_t seqno; + unsigned long recent_enough = jiffies - msecs_to_jiffies(20); mutex_lock(&dev->struct_mutex); - seqno = i915_file_priv->mm.last_gem_throttle_seqno; - i915_file_priv->mm.last_gem_throttle_seqno = - i915_file_priv->mm.last_gem_seqno; - if (seqno) - ret = i915_wait_request(dev, seqno); + while (!list_empty(&i915_file_priv->mm.request_list)) { + struct drm_i915_gem_request *request; + + request = list_first_entry(&i915_file_priv->mm.request_list, + struct drm_i915_gem_request, + client_list); + + if (time_after_eq(request->emitted_jiffies, recent_enough)) + break; + + ret = i915_wait_request(dev, request->seqno); + if (ret != 0) + break; + } mutex_unlock(&dev->struct_mutex); + return ret; } @@ -3187,7 +3213,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = dev->dev_private; - struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv; struct drm_i915_gem_execbuffer *args = data; struct drm_i915_gem_exec_object *exec_list = NULL; struct drm_gem_object **object_list = NULL; @@ -3363,7 +3388,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, dev->invalidate_domains, dev->flush_domains); if (dev->flush_domains) - (void)i915_add_request(dev, dev->flush_domains); + (void)i915_add_request(dev, file_priv, + dev->flush_domains); } for (i = 0; i < args->buffer_count; i++) { @@ -3412,9 +3438,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, * *some* interrupts representing completion of buffers that we can * wait on when trying to clear up gtt space). */ - seqno = i915_add_request(dev, flush_domains); + seqno = i915_add_request(dev, file_priv, flush_domains); BUG_ON(seqno == 0); - i915_file_priv->mm.last_gem_seqno = seqno; for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; @@ -3802,7 +3827,7 @@ i915_gem_idle(struct drm_device *dev) */ i915_gem_flush(dev, ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT), ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); - seqno = i915_add_request(dev, ~I915_GEM_DOMAIN_CPU); + seqno = i915_add_request(dev, NULL, ~I915_GEM_DOMAIN_CPU); if (seqno == 0) { mutex_unlock(&dev->struct_mutex); @@ -4352,3 +4377,17 @@ i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj, drm_agp_chipset_flush(dev); return 0; } + +void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv) +{ + struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv; + + /* Clean up our request list when the client is going away, so that + * later retire_requests won't dereference our soon-to-be-gone + * file_priv. + */ + mutex_lock(&dev->struct_mutex); + while (!list_empty(&i915_file_priv->mm.request_list)) + list_del_init(i915_file_priv->mm.request_list.next); + mutex_unlock(&dev->struct_mutex); +} -- cgit v1.2.3 From 32cb055b57eab803ea82b76dc913b0378e5af145 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 5 Jun 2009 15:38:36 +0800 Subject: agp/intel: Add support for new chipsets Both desktop and mobile versions are added. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/char/agp/intel-agp.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 3686912427ba..7a748fa0dfce 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -46,6 +46,10 @@ #define PCI_DEVICE_ID_INTEL_G45_IG 0x2E22 #define PCI_DEVICE_ID_INTEL_G41_HB 0x2E30 #define PCI_DEVICE_ID_INTEL_G41_IG 0x2E32 +#define PCI_DEVICE_ID_INTEL_IGDNG_D_HB 0x0040 +#define PCI_DEVICE_ID_INTEL_IGDNG_D_IG 0x0042 +#define PCI_DEVICE_ID_INTEL_IGDNG_M_HB 0x0044 +#define PCI_DEVICE_ID_INTEL_IGDNG_M_IG 0x0046 /* cover 915 and 945 variants */ #define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \ @@ -75,7 +79,9 @@ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_D_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB) extern int agp_memory_reserved; @@ -1211,6 +1217,8 @@ static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size) case PCI_DEVICE_ID_INTEL_Q45_HB: case PCI_DEVICE_ID_INTEL_G45_HB: case PCI_DEVICE_ID_INTEL_G41_HB: + case PCI_DEVICE_ID_INTEL_IGDNG_D_HB: + case PCI_DEVICE_ID_INTEL_IGDNG_M_HB: *gtt_offset = *gtt_size = MB(2); break; default: @@ -2186,6 +2194,10 @@ static const struct intel_driver_description { "G45/G43", NULL, &intel_i965_driver }, { PCI_DEVICE_ID_INTEL_G41_HB, PCI_DEVICE_ID_INTEL_G41_IG, 0, "G41", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_IGDNG_D_HB, PCI_DEVICE_ID_INTEL_IGDNG_D_IG, 0, + "IGDNG/D", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_IGDNG_M_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0, + "IGDNG/M", NULL, &intel_i965_driver }, { 0, 0, 0, NULL, NULL, NULL } }; @@ -2387,6 +2399,8 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_Q45_HB), ID(PCI_DEVICE_ID_INTEL_G45_HB), ID(PCI_DEVICE_ID_INTEL_G41_HB), + ID(PCI_DEVICE_ID_INTEL_IGDNG_D_HB), + ID(PCI_DEVICE_ID_INTEL_IGDNG_M_HB), { } }; -- cgit v1.2.3 From 280da227c870a50f669de0c8d46bfb2c62da9995 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 5 Jun 2009 15:38:37 +0800 Subject: drm/i915: Add chipset/feature defines for for new chipsets Signed-off-by: Zhenyu Wang [anholt: dropped drm_pciids.h hunk to avoid loading an incomplete driver] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index e0fac5f62c69..ded9e786883e 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -796,7 +796,9 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); (dev)->pci_device == 0x2E02 || \ (dev)->pci_device == 0x2E12 || \ (dev)->pci_device == 0x2E22 || \ - (dev)->pci_device == 0x2E32) + (dev)->pci_device == 0x2E32 || \ + (dev)->pci_device == 0x0042 || \ + (dev)->pci_device == 0x0046) #define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \ (dev)->pci_device == 0x2A12) @@ -818,20 +820,26 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); (dev)->pci_device == 0x29D2 || \ (IS_IGD(dev))) +#define IS_IGDNG_D(dev) ((dev)->pci_device == 0x0042) +#define IS_IGDNG_M(dev) ((dev)->pci_device == 0x0046) +#define IS_IGDNG(dev) (IS_IGDNG_D(dev) || IS_IGDNG_M(dev)) + #define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \ - IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev)) + IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev) || \ + IS_IGDNG(dev)) #define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \ IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev) || \ - IS_IGD(dev)) + IS_IGD(dev) || IS_IGDNG_M(dev)) -#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev)) +#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev) || \ + IS_IGDNG(dev)) /* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte * rows, which changed the alignment requirements and fence programming. */ #define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \ IS_I915GM(dev))) -#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev)) +#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev)) #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) -- cgit v1.2.3 From b9055052d3e0388b4a5e8c3e0bbab665c5996f50 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 5 Jun 2009 15:38:38 +0800 Subject: drm/i915: Add new chipset register definitions Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 447 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 447 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 375569d01d01..99681cfb7ab9 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -450,6 +450,13 @@ #define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) #define PLL_REF_INPUT_MASK (3 << 13) #define PLL_LOAD_PULSE_PHASE_SHIFT 9 +/* IGDNG */ +# define PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT 9 +# define PLL_REF_SDVO_HDMI_MULTIPLIER_MASK (7 << 9) +# define PLL_REF_SDVO_HDMI_MULTIPLIER(x) (((x)-1) << 9) +# define DPLL_FPA1_P1_POST_DIV_SHIFT 0 +# define DPLL_FPA1_P1_POST_DIV_MASK 0xff + /* * Parallel to Serial Load Pulse phase selection. * Selects the phase for the 10X DPLL clock for the PCIe @@ -1517,4 +1524,444 @@ # define VGA_2X_MODE (1 << 30) # define VGA_PIPE_B_SELECT (1 << 29) +/* IGDNG */ + +#define CPU_VGACNTRL 0x41000 + +#define DIGITAL_PORT_HOTPLUG_CNTRL 0x44030 +#define DIGITAL_PORTA_HOTPLUG_ENABLE (1 << 4) +#define DIGITAL_PORTA_SHORT_PULSE_2MS (0 << 2) +#define DIGITAL_PORTA_SHORT_PULSE_4_5MS (1 << 2) +#define DIGITAL_PORTA_SHORT_PULSE_6MS (2 << 2) +#define DIGITAL_PORTA_SHORT_PULSE_100MS (3 << 2) +#define DIGITAL_PORTA_NO_DETECT (0 << 0) +#define DIGITAL_PORTA_LONG_PULSE_DETECT_MASK (1 << 1) +#define DIGITAL_PORTA_SHORT_PULSE_DETECT_MASK (1 << 0) + +/* refresh rate hardware control */ +#define RR_HW_CTL 0x45300 +#define RR_HW_LOW_POWER_FRAMES_MASK 0xff +#define RR_HW_HIGH_POWER_FRAMES_MASK 0xff00 + +#define FDI_PLL_BIOS_0 0x46000 +#define FDI_PLL_BIOS_1 0x46004 +#define FDI_PLL_BIOS_2 0x46008 +#define DISPLAY_PORT_PLL_BIOS_0 0x4600c +#define DISPLAY_PORT_PLL_BIOS_1 0x46010 +#define DISPLAY_PORT_PLL_BIOS_2 0x46014 + +#define FDI_PLL_FREQ_CTL 0x46030 +#define FDI_PLL_FREQ_CHANGE_REQUEST (1<<24) +#define FDI_PLL_FREQ_LOCK_LIMIT_MASK 0xfff00 +#define FDI_PLL_FREQ_DISABLE_COUNT_LIMIT_MASK 0xff + + +#define PIPEA_DATA_M1 0x60030 +#define TU_SIZE(x) (((x)-1) << 25) /* default size 64 */ +#define TU_SIZE_MASK 0x7e000000 +#define PIPEA_DATA_M1_OFFSET 0 +#define PIPEA_DATA_N1 0x60034 +#define PIPEA_DATA_N1_OFFSET 0 + +#define PIPEA_DATA_M2 0x60038 +#define PIPEA_DATA_M2_OFFSET 0 +#define PIPEA_DATA_N2 0x6003c +#define PIPEA_DATA_N2_OFFSET 0 + +#define PIPEA_LINK_M1 0x60040 +#define PIPEA_LINK_M1_OFFSET 0 +#define PIPEA_LINK_N1 0x60044 +#define PIPEA_LINK_N1_OFFSET 0 + +#define PIPEA_LINK_M2 0x60048 +#define PIPEA_LINK_M2_OFFSET 0 +#define PIPEA_LINK_N2 0x6004c +#define PIPEA_LINK_N2_OFFSET 0 + +/* PIPEB timing regs are same start from 0x61000 */ + +#define PIPEB_DATA_M1 0x61030 +#define PIPEB_DATA_M1_OFFSET 0 +#define PIPEB_DATA_N1 0x61034 +#define PIPEB_DATA_N1_OFFSET 0 + +#define PIPEB_DATA_M2 0x61038 +#define PIPEB_DATA_M2_OFFSET 0 +#define PIPEB_DATA_N2 0x6103c +#define PIPEB_DATA_N2_OFFSET 0 + +#define PIPEB_LINK_M1 0x61040 +#define PIPEB_LINK_M1_OFFSET 0 +#define PIPEB_LINK_N1 0x61044 +#define PIPEB_LINK_N1_OFFSET 0 + +#define PIPEB_LINK_M2 0x61048 +#define PIPEB_LINK_M2_OFFSET 0 +#define PIPEB_LINK_N2 0x6104c +#define PIPEB_LINK_N2_OFFSET 0 + +/* CPU panel fitter */ +#define PFA_CTL_1 0x68080 +#define PFB_CTL_1 0x68880 +#define PF_ENABLE (1<<31) + +/* legacy palette */ +#define LGC_PALETTE_A 0x4a000 +#define LGC_PALETTE_B 0x4a800 + +/* interrupts */ +#define DE_MASTER_IRQ_CONTROL (1 << 31) +#define DE_SPRITEB_FLIP_DONE (1 << 29) +#define DE_SPRITEA_FLIP_DONE (1 << 28) +#define DE_PLANEB_FLIP_DONE (1 << 27) +#define DE_PLANEA_FLIP_DONE (1 << 26) +#define DE_PCU_EVENT (1 << 25) +#define DE_GTT_FAULT (1 << 24) +#define DE_POISON (1 << 23) +#define DE_PERFORM_COUNTER (1 << 22) +#define DE_PCH_EVENT (1 << 21) +#define DE_AUX_CHANNEL_A (1 << 20) +#define DE_DP_A_HOTPLUG (1 << 19) +#define DE_GSE (1 << 18) +#define DE_PIPEB_VBLANK (1 << 15) +#define DE_PIPEB_EVEN_FIELD (1 << 14) +#define DE_PIPEB_ODD_FIELD (1 << 13) +#define DE_PIPEB_LINE_COMPARE (1 << 12) +#define DE_PIPEB_VSYNC (1 << 11) +#define DE_PIPEB_FIFO_UNDERRUN (1 << 8) +#define DE_PIPEA_VBLANK (1 << 7) +#define DE_PIPEA_EVEN_FIELD (1 << 6) +#define DE_PIPEA_ODD_FIELD (1 << 5) +#define DE_PIPEA_LINE_COMPARE (1 << 4) +#define DE_PIPEA_VSYNC (1 << 3) +#define DE_PIPEA_FIFO_UNDERRUN (1 << 0) + +#define DEISR 0x44000 +#define DEIMR 0x44004 +#define DEIIR 0x44008 +#define DEIER 0x4400c + +/* GT interrupt */ +#define GT_SYNC_STATUS (1 << 2) +#define GT_USER_INTERRUPT (1 << 0) + +#define GTISR 0x44010 +#define GTIMR 0x44014 +#define GTIIR 0x44018 +#define GTIER 0x4401c + +/* PCH */ + +/* south display engine interrupt */ +#define SDE_CRT_HOTPLUG (1 << 11) +#define SDE_PORTD_HOTPLUG (1 << 10) +#define SDE_PORTC_HOTPLUG (1 << 9) +#define SDE_PORTB_HOTPLUG (1 << 8) +#define SDE_SDVOB_HOTPLUG (1 << 6) + +#define SDEISR 0xc4000 +#define SDEIMR 0xc4004 +#define SDEIIR 0xc4008 +#define SDEIER 0xc400c + +/* digital port hotplug */ +#define PCH_PORT_HOTPLUG 0xc4030 +#define PORTD_HOTPLUG_ENABLE (1 << 20) +#define PORTD_PULSE_DURATION_2ms (0) +#define PORTD_PULSE_DURATION_4_5ms (1 << 18) +#define PORTD_PULSE_DURATION_6ms (2 << 18) +#define PORTD_PULSE_DURATION_100ms (3 << 18) +#define PORTD_HOTPLUG_NO_DETECT (0) +#define PORTD_HOTPLUG_SHORT_DETECT (1 << 16) +#define PORTD_HOTPLUG_LONG_DETECT (1 << 17) +#define PORTC_HOTPLUG_ENABLE (1 << 12) +#define PORTC_PULSE_DURATION_2ms (0) +#define PORTC_PULSE_DURATION_4_5ms (1 << 10) +#define PORTC_PULSE_DURATION_6ms (2 << 10) +#define PORTC_PULSE_DURATION_100ms (3 << 10) +#define PORTC_HOTPLUG_NO_DETECT (0) +#define PORTC_HOTPLUG_SHORT_DETECT (1 << 8) +#define PORTC_HOTPLUG_LONG_DETECT (1 << 9) +#define PORTB_HOTPLUG_ENABLE (1 << 4) +#define PORTB_PULSE_DURATION_2ms (0) +#define PORTB_PULSE_DURATION_4_5ms (1 << 2) +#define PORTB_PULSE_DURATION_6ms (2 << 2) +#define PORTB_PULSE_DURATION_100ms (3 << 2) +#define PORTB_HOTPLUG_NO_DETECT (0) +#define PORTB_HOTPLUG_SHORT_DETECT (1 << 0) +#define PORTB_HOTPLUG_LONG_DETECT (1 << 1) + +#define PCH_GPIOA 0xc5010 +#define PCH_GPIOB 0xc5014 +#define PCH_GPIOC 0xc5018 +#define PCH_GPIOD 0xc501c +#define PCH_GPIOE 0xc5020 +#define PCH_GPIOF 0xc5024 + +#define PCH_DPLL_A 0xc6014 +#define PCH_DPLL_B 0xc6018 + +#define PCH_FPA0 0xc6040 +#define PCH_FPA1 0xc6044 +#define PCH_FPB0 0xc6048 +#define PCH_FPB1 0xc604c + +#define PCH_DPLL_TEST 0xc606c + +#define PCH_DREF_CONTROL 0xC6200 +#define DREF_CONTROL_MASK 0x7fc3 +#define DREF_CPU_SOURCE_OUTPUT_DISABLE (0<<13) +#define DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD (2<<13) +#define DREF_CPU_SOURCE_OUTPUT_NONSPREAD (3<<13) +#define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13) +#define DREF_SSC_SOURCE_DISABLE (0<<11) +#define DREF_SSC_SOURCE_ENABLE (2<<11) +#define DREF_SSC_SOURCE_MASK (2<<11) +#define DREF_NONSPREAD_SOURCE_DISABLE (0<<9) +#define DREF_NONSPREAD_CK505_ENABLE (1<<9) +#define DREF_NONSPREAD_SOURCE_ENABLE (2<<9) +#define DREF_NONSPREAD_SOURCE_MASK (2<<9) +#define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7) +#define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7) +#define DREF_SSC4_DOWNSPREAD (0<<6) +#define DREF_SSC4_CENTERSPREAD (1<<6) +#define DREF_SSC1_DISABLE (0<<1) +#define DREF_SSC1_ENABLE (1<<1) +#define DREF_SSC4_DISABLE (0) +#define DREF_SSC4_ENABLE (1) + +#define PCH_RAWCLK_FREQ 0xc6204 +#define FDL_TP1_TIMER_SHIFT 12 +#define FDL_TP1_TIMER_MASK (3<<12) +#define FDL_TP2_TIMER_SHIFT 10 +#define FDL_TP2_TIMER_MASK (3<<10) +#define RAWCLK_FREQ_MASK 0x3ff + +#define PCH_DPLL_TMR_CFG 0xc6208 + +#define PCH_SSC4_PARMS 0xc6210 +#define PCH_SSC4_AUX_PARMS 0xc6214 + +/* transcoder */ + +#define TRANS_HTOTAL_A 0xe0000 +#define TRANS_HTOTAL_SHIFT 16 +#define TRANS_HACTIVE_SHIFT 0 +#define TRANS_HBLANK_A 0xe0004 +#define TRANS_HBLANK_END_SHIFT 16 +#define TRANS_HBLANK_START_SHIFT 0 +#define TRANS_HSYNC_A 0xe0008 +#define TRANS_HSYNC_END_SHIFT 16 +#define TRANS_HSYNC_START_SHIFT 0 +#define TRANS_VTOTAL_A 0xe000c +#define TRANS_VTOTAL_SHIFT 16 +#define TRANS_VACTIVE_SHIFT 0 +#define TRANS_VBLANK_A 0xe0010 +#define TRANS_VBLANK_END_SHIFT 16 +#define TRANS_VBLANK_START_SHIFT 0 +#define TRANS_VSYNC_A 0xe0014 +#define TRANS_VSYNC_END_SHIFT 16 +#define TRANS_VSYNC_START_SHIFT 0 + +#define TRANSA_DATA_M1 0xe0030 +#define TRANSA_DATA_N1 0xe0034 +#define TRANSA_DATA_M2 0xe0038 +#define TRANSA_DATA_N2 0xe003c +#define TRANSA_DP_LINK_M1 0xe0040 +#define TRANSA_DP_LINK_N1 0xe0044 +#define TRANSA_DP_LINK_M2 0xe0048 +#define TRANSA_DP_LINK_N2 0xe004c + +#define TRANS_HTOTAL_B 0xe1000 +#define TRANS_HBLANK_B 0xe1004 +#define TRANS_HSYNC_B 0xe1008 +#define TRANS_VTOTAL_B 0xe100c +#define TRANS_VBLANK_B 0xe1010 +#define TRANS_VSYNC_B 0xe1014 + +#define TRANSB_DATA_M1 0xe1030 +#define TRANSB_DATA_N1 0xe1034 +#define TRANSB_DATA_M2 0xe1038 +#define TRANSB_DATA_N2 0xe103c +#define TRANSB_DP_LINK_M1 0xe1040 +#define TRANSB_DP_LINK_N1 0xe1044 +#define TRANSB_DP_LINK_M2 0xe1048 +#define TRANSB_DP_LINK_N2 0xe104c + +#define TRANSACONF 0xf0008 +#define TRANSBCONF 0xf1008 +#define TRANS_DISABLE (0<<31) +#define TRANS_ENABLE (1<<31) +#define TRANS_STATE_MASK (1<<30) +#define TRANS_STATE_DISABLE (0<<30) +#define TRANS_STATE_ENABLE (1<<30) +#define TRANS_FSYNC_DELAY_HB1 (0<<27) +#define TRANS_FSYNC_DELAY_HB2 (1<<27) +#define TRANS_FSYNC_DELAY_HB3 (2<<27) +#define TRANS_FSYNC_DELAY_HB4 (3<<27) +#define TRANS_DP_AUDIO_ONLY (1<<26) +#define TRANS_DP_VIDEO_AUDIO (0<<26) +#define TRANS_PROGRESSIVE (0<<21) +#define TRANS_8BPC (0<<5) +#define TRANS_10BPC (1<<5) +#define TRANS_6BPC (2<<5) +#define TRANS_12BPC (3<<5) + +#define FDI_RXA_CHICKEN 0xc200c +#define FDI_RXB_CHICKEN 0xc2010 +#define FDI_RX_PHASE_SYNC_POINTER_ENABLE (1) + +/* CPU: FDI_TX */ +#define FDI_TXA_CTL 0x60100 +#define FDI_TXB_CTL 0x61100 +#define FDI_TX_DISABLE (0<<31) +#define FDI_TX_ENABLE (1<<31) +#define FDI_LINK_TRAIN_PATTERN_1 (0<<28) +#define FDI_LINK_TRAIN_PATTERN_2 (1<<28) +#define FDI_LINK_TRAIN_PATTERN_IDLE (2<<28) +#define FDI_LINK_TRAIN_NONE (3<<28) +#define FDI_LINK_TRAIN_VOLTAGE_0_4V (0<<25) +#define FDI_LINK_TRAIN_VOLTAGE_0_6V (1<<25) +#define FDI_LINK_TRAIN_VOLTAGE_0_8V (2<<25) +#define FDI_LINK_TRAIN_VOLTAGE_1_2V (3<<25) +#define FDI_LINK_TRAIN_PRE_EMPHASIS_NONE (0<<22) +#define FDI_LINK_TRAIN_PRE_EMPHASIS_1_5X (1<<22) +#define FDI_LINK_TRAIN_PRE_EMPHASIS_2X (2<<22) +#define FDI_LINK_TRAIN_PRE_EMPHASIS_3X (3<<22) +#define FDI_DP_PORT_WIDTH_X1 (0<<19) +#define FDI_DP_PORT_WIDTH_X2 (1<<19) +#define FDI_DP_PORT_WIDTH_X3 (2<<19) +#define FDI_DP_PORT_WIDTH_X4 (3<<19) +#define FDI_TX_ENHANCE_FRAME_ENABLE (1<<18) +/* IGDNG: hardwired to 1 */ +#define FDI_TX_PLL_ENABLE (1<<14) +/* both Tx and Rx */ +#define FDI_SCRAMBLING_ENABLE (0<<7) +#define FDI_SCRAMBLING_DISABLE (1<<7) + +/* FDI_RX, FDI_X is hard-wired to Transcoder_X */ +#define FDI_RXA_CTL 0xf000c +#define FDI_RXB_CTL 0xf100c +#define FDI_RX_ENABLE (1<<31) +#define FDI_RX_DISABLE (0<<31) +/* train, dp width same as FDI_TX */ +#define FDI_DP_PORT_WIDTH_X8 (7<<19) +#define FDI_8BPC (0<<16) +#define FDI_10BPC (1<<16) +#define FDI_6BPC (2<<16) +#define FDI_12BPC (3<<16) +#define FDI_LINK_REVERSE_OVERWRITE (1<<15) +#define FDI_DMI_LINK_REVERSE_MASK (1<<14) +#define FDI_RX_PLL_ENABLE (1<<13) +#define FDI_FS_ERR_CORRECT_ENABLE (1<<11) +#define FDI_FE_ERR_CORRECT_ENABLE (1<<10) +#define FDI_FS_ERR_REPORT_ENABLE (1<<9) +#define FDI_FE_ERR_REPORT_ENABLE (1<<8) +#define FDI_RX_ENHANCE_FRAME_ENABLE (1<<6) +#define FDI_SEL_RAWCLK (0<<4) +#define FDI_SEL_PCDCLK (1<<4) + +#define FDI_RXA_MISC 0xf0010 +#define FDI_RXB_MISC 0xf1010 +#define FDI_RXA_TUSIZE1 0xf0030 +#define FDI_RXA_TUSIZE2 0xf0038 +#define FDI_RXB_TUSIZE1 0xf1030 +#define FDI_RXB_TUSIZE2 0xf1038 + +/* FDI_RX interrupt register format */ +#define FDI_RX_INTER_LANE_ALIGN (1<<10) +#define FDI_RX_SYMBOL_LOCK (1<<9) /* train 2 */ +#define FDI_RX_BIT_LOCK (1<<8) /* train 1 */ +#define FDI_RX_TRAIN_PATTERN_2_FAIL (1<<7) +#define FDI_RX_FS_CODE_ERR (1<<6) +#define FDI_RX_FE_CODE_ERR (1<<5) +#define FDI_RX_SYMBOL_ERR_RATE_ABOVE (1<<4) +#define FDI_RX_HDCP_LINK_FAIL (1<<3) +#define FDI_RX_PIXEL_FIFO_OVERFLOW (1<<2) +#define FDI_RX_CROSS_CLOCK_OVERFLOW (1<<1) +#define FDI_RX_SYMBOL_QUEUE_OVERFLOW (1<<0) + +#define FDI_RXA_IIR 0xf0014 +#define FDI_RXA_IMR 0xf0018 +#define FDI_RXB_IIR 0xf1014 +#define FDI_RXB_IMR 0xf1018 + +#define FDI_PLL_CTL_1 0xfe000 +#define FDI_PLL_CTL_2 0xfe004 + +/* CRT */ +#define PCH_ADPA 0xe1100 +#define ADPA_TRANS_SELECT_MASK (1<<30) +#define ADPA_TRANS_A_SELECT 0 +#define ADPA_TRANS_B_SELECT (1<<30) +#define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */ +#define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24) +#define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24) +#define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24) +#define ADPA_CRT_HOTPLUG_MONITOR_MONO (2<<24) +#define ADPA_CRT_HOTPLUG_ENABLE (1<<23) +#define ADPA_CRT_HOTPLUG_PERIOD_64 (0<<22) +#define ADPA_CRT_HOTPLUG_PERIOD_128 (1<<22) +#define ADPA_CRT_HOTPLUG_WARMUP_5MS (0<<21) +#define ADPA_CRT_HOTPLUG_WARMUP_10MS (1<<21) +#define ADPA_CRT_HOTPLUG_SAMPLE_2S (0<<20) +#define ADPA_CRT_HOTPLUG_SAMPLE_4S (1<<20) +#define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0<<18) +#define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1<<18) +#define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2<<18) +#define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3<<18) +#define ADPA_CRT_HOTPLUG_VOLREF_325MV (0<<17) +#define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17) +#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) + +/* or SDVOB */ +#define HDMIB 0xe1140 +#define PORT_ENABLE (1 << 31) +#define TRANSCODER_A (0) +#define TRANSCODER_B (1 << 30) +#define COLOR_FORMAT_8bpc (0) +#define COLOR_FORMAT_12bpc (3 << 26) +#define SDVOB_HOTPLUG_ENABLE (1 << 23) +#define SDVO_ENCODING (0) +#define TMDS_ENCODING (2 << 10) +#define NULL_PACKET_VSYNC_ENABLE (1 << 9) +#define SDVOB_BORDER_ENABLE (1 << 7) +#define AUDIO_ENABLE (1 << 6) +#define VSYNC_ACTIVE_HIGH (1 << 4) +#define HSYNC_ACTIVE_HIGH (1 << 3) +#define PORT_DETECTED (1 << 2) + +#define HDMIC 0xe1150 +#define HDMID 0xe1160 + +#define PCH_LVDS 0xe1180 +#define LVDS_DETECTED (1 << 1) + +#define BLC_PWM_CPU_CTL2 0x48250 +#define PWM_ENABLE (1 << 31) +#define PWM_PIPE_A (0 << 29) +#define PWM_PIPE_B (1 << 29) +#define BLC_PWM_CPU_CTL 0x48254 + +#define BLC_PWM_PCH_CTL1 0xc8250 +#define PWM_PCH_ENABLE (1 << 31) +#define PWM_POLARITY_ACTIVE_LOW (1 << 29) +#define PWM_POLARITY_ACTIVE_HIGH (0 << 29) +#define PWM_POLARITY_ACTIVE_LOW2 (1 << 28) +#define PWM_POLARITY_ACTIVE_HIGH2 (0 << 28) + +#define BLC_PWM_PCH_CTL2 0xc8254 + +#define PCH_PP_STATUS 0xc7200 +#define PCH_PP_CONTROL 0xc7204 +#define EDP_FORCE_VDD (1 << 3) +#define EDP_BLC_ENABLE (1 << 2) +#define PANEL_POWER_RESET (1 << 1) +#define PANEL_POWER_OFF (0 << 0) +#define PANEL_POWER_ON (1 << 0) +#define PCH_PP_ON_DELAYS 0xc7208 +#define EDP_PANEL (1 << 30) +#define PCH_PP_OFF_DELAYS 0xc720c +#define PCH_PP_DIVISOR 0xc7210 + #endif /* _I915_REG_H_ */ -- cgit v1.2.3 From e170b030dcd6aed11dde2d124c09991ec771f529 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 5 Jun 2009 15:38:40 +0800 Subject: drm/i915: Disable opregion on IGDNG for now Disable OpRegion support for now until verified on new chipsets. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 7 +++++-- drivers/gpu/drm/i915/i915_irq.c | 4 +++- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 0c222c28b8c1..fa105bd119a6 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1206,7 +1206,9 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) } /* Must be done after probing outputs */ - intel_opregion_init(dev, 0); + /* FIXME: verify on IGDNG */ + if (!IS_IGDNG(dev)) + intel_opregion_init(dev, 0); return 0; @@ -1240,7 +1242,8 @@ int i915_driver_unload(struct drm_device *dev) if (dev_priv->regs != NULL) iounmap(dev_priv->regs); - intel_opregion_free(dev, 0); + if (!IS_IGDNG(dev)) + intel_opregion_free(dev, 0); if (drm_core_check_feature(dev, DRIVER_MODESET)) { intel_modeset_cleanup(dev); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 98bb4c878c4e..4b0bcbd58b8f 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -484,7 +484,9 @@ void i915_disable_vblank(struct drm_device *dev, int pipe) void i915_enable_interrupt (struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - opregion_enable_asle(dev); + + if (!IS_IGDNG(dev)) + opregion_enable_asle(dev); dev_priv->irq_enabled = 1; } -- cgit v1.2.3 From 2cce0d8740f0d1454d012401257d96c513ce358f Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 5 Jun 2009 15:38:41 +0800 Subject: drm/i915: Disable tiling on IGDNG for now Swizzle bit detection not working right on it. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem_tiling.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 540dd336e6ec..07d976bf4931 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -170,6 +170,13 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) } } + /* FIXME: check with memory config on IGDNG */ + if (IS_IGDNG(dev)) { + DRM_ERROR("disable tiling on IGDNG...\n"); + swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN; + swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN; + } + dev_priv->mm.bit_6_swizzle_x = swizzle_x; dev_priv->mm.bit_6_swizzle_y = swizzle_y; } -- cgit v1.2.3 From 2c07245fb8f7f0a282282e5a9747e46defdb2cc7 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 5 Jun 2009 15:38:42 +0800 Subject: drm/i915: enable kernel modesetting on IGDNG This adds kernel mode setting on IGDNG with VGA output support. Note that suspend/resume doesn't work yet. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 2 +- drivers/gpu/drm/i915/intel_crt.c | 76 ++++- drivers/gpu/drm/i915/intel_display.c | 603 +++++++++++++++++++++++++++++++++-- 3 files changed, 643 insertions(+), 38 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index fa105bd119a6..5d36059d6f4e 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -922,7 +922,7 @@ static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size, * Some of the preallocated space is taken by the GTT * and popup. GTT is 1K per MB of aperture size, and popup is 4K. */ - if (IS_G4X(dev) || IS_IGD(dev)) + if (IS_G4X(dev) || IS_IGD(dev) || IS_IGDNG(dev)) overhead = 4096; else overhead = (*aperture_size / 1024) + 4096; diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 640f5158effc..ff9bccad3871 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -37,9 +37,14 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode) { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 temp; + u32 temp, reg; - temp = I915_READ(ADPA); + if (IS_IGDNG(dev)) + reg = PCH_ADPA; + else + reg = ADPA; + + temp = I915_READ(reg); temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); temp |= ADPA_DAC_ENABLE; @@ -58,7 +63,7 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode) break; } - I915_WRITE(ADPA, temp); + I915_WRITE(reg, temp); } static int intel_crt_mode_valid(struct drm_connector *connector, @@ -101,17 +106,23 @@ static void intel_crt_mode_set(struct drm_encoder *encoder, struct drm_i915_private *dev_priv = dev->dev_private; int dpll_md_reg; u32 adpa, dpll_md; + u32 adpa_reg; if (intel_crtc->pipe == 0) dpll_md_reg = DPLL_A_MD; else dpll_md_reg = DPLL_B_MD; + if (IS_IGDNG(dev)) + adpa_reg = PCH_ADPA; + else + adpa_reg = ADPA; + /* * Disable separate mode multiplier used when cloning SDVO to CRT * XXX this needs to be adjusted when we really are cloning */ - if (IS_I965G(dev)) { + if (IS_I965G(dev) && !IS_IGDNG(dev)) { dpll_md = I915_READ(dpll_md_reg); I915_WRITE(dpll_md_reg, dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK); @@ -125,13 +136,53 @@ static void intel_crt_mode_set(struct drm_encoder *encoder, if (intel_crtc->pipe == 0) { adpa |= ADPA_PIPE_A_SELECT; - I915_WRITE(BCLRPAT_A, 0); + if (!IS_IGDNG(dev)) + I915_WRITE(BCLRPAT_A, 0); } else { adpa |= ADPA_PIPE_B_SELECT; - I915_WRITE(BCLRPAT_B, 0); + if (!IS_IGDNG(dev)) + I915_WRITE(BCLRPAT_B, 0); } - I915_WRITE(ADPA, adpa); + I915_WRITE(adpa_reg, adpa); +} + +static bool intel_igdng_crt_detect_hotplug(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 adpa, temp; + bool ret; + + temp = adpa = I915_READ(PCH_ADPA); + + adpa &= ~ADPA_CRT_HOTPLUG_MASK; + + adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 | + ADPA_CRT_HOTPLUG_WARMUP_10MS | + ADPA_CRT_HOTPLUG_SAMPLE_4S | + ADPA_CRT_HOTPLUG_VOLTAGE_50 | /* default */ + ADPA_CRT_HOTPLUG_VOLREF_325MV | + ADPA_CRT_HOTPLUG_ENABLE | + ADPA_CRT_HOTPLUG_FORCE_TRIGGER); + + DRM_DEBUG("pch crt adpa 0x%x", adpa); + I915_WRITE(PCH_ADPA, adpa); + + /* This might not be needed as not specified in spec...*/ + udelay(1000); + + /* Check the status to see if both blue and green are on now */ + adpa = I915_READ(PCH_ADPA); + if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) == + ADPA_CRT_HOTPLUG_MONITOR_COLOR) + ret = true; + else + ret = false; + + /* restore origin register */ + I915_WRITE(PCH_ADPA, temp); + return ret; } /** @@ -148,6 +199,10 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector) struct drm_i915_private *dev_priv = dev->dev_private; u32 hotplug_en; int i, tries = 0; + + if (IS_IGDNG(dev)) + return intel_igdng_crt_detect_hotplug(connector); + /* * On 4 series desktop, CRT detect sequence need to be done twice * to get a reliable result. @@ -427,6 +482,7 @@ void intel_crt_init(struct drm_device *dev) { struct drm_connector *connector; struct intel_output *intel_output; + u32 i2c_reg; intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); if (!intel_output) @@ -443,7 +499,11 @@ void intel_crt_init(struct drm_device *dev) &intel_output->enc); /* Set up the DDC bus. */ - intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A"); + if (IS_IGDNG(dev)) + i2c_reg = PCH_GPIOA; + else + i2c_reg = GPIOA; + intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A"); if (!intel_output->ddc_bus) { dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " "failed.\n"); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c9d6f10ba92e..2cd6ba6523d8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -137,6 +137,8 @@ struct intel_limit { #define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS 7 #define INTEL_LIMIT_IGD_SDVO_DAC 8 #define INTEL_LIMIT_IGD_LVDS 9 +#define INTEL_LIMIT_IGDNG_SDVO_DAC 10 +#define INTEL_LIMIT_IGDNG_LVDS 11 /*The parameter is for SDVO on G4x platform*/ #define G4X_DOT_SDVO_MIN 25000 @@ -216,12 +218,43 @@ struct intel_limit { #define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0 +/* IGDNG */ +/* as we calculate clock using (register_value + 2) for + N/M1/M2, so here the range value for them is (actual_value-2). + */ +#define IGDNG_DOT_MIN 25000 +#define IGDNG_DOT_MAX 350000 +#define IGDNG_VCO_MIN 1760000 +#define IGDNG_VCO_MAX 3510000 +#define IGDNG_N_MIN 1 +#define IGDNG_N_MAX 5 +#define IGDNG_M_MIN 79 +#define IGDNG_M_MAX 118 +#define IGDNG_M1_MIN 12 +#define IGDNG_M1_MAX 23 +#define IGDNG_M2_MIN 5 +#define IGDNG_M2_MAX 9 +#define IGDNG_P_SDVO_DAC_MIN 5 +#define IGDNG_P_SDVO_DAC_MAX 80 +#define IGDNG_P_LVDS_MIN 28 +#define IGDNG_P_LVDS_MAX 112 +#define IGDNG_P1_MIN 1 +#define IGDNG_P1_MAX 8 +#define IGDNG_P2_SDVO_DAC_SLOW 10 +#define IGDNG_P2_SDVO_DAC_FAST 5 +#define IGDNG_P2_LVDS_SLOW 14 /* single channel */ +#define IGDNG_P2_LVDS_FAST 7 /* double channel */ +#define IGDNG_P2_DOT_LIMIT 225000 /* 225Mhz */ + static bool intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); +static bool +intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *best_clock); static const intel_limit_t intel_limits[] = { { /* INTEL_LIMIT_I8XX_DVO_DAC */ @@ -383,9 +416,47 @@ static const intel_limit_t intel_limits[] = { .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW }, .find_pll = intel_find_best_PLL, }, - + { /* INTEL_LIMIT_IGDNG_SDVO_DAC */ + .dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX }, + .vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX }, + .n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX }, + .m = { .min = IGDNG_M_MIN, .max = IGDNG_M_MAX }, + .m1 = { .min = IGDNG_M1_MIN, .max = IGDNG_M1_MAX }, + .m2 = { .min = IGDNG_M2_MIN, .max = IGDNG_M2_MAX }, + .p = { .min = IGDNG_P_SDVO_DAC_MIN, .max = IGDNG_P_SDVO_DAC_MAX }, + .p1 = { .min = IGDNG_P1_MIN, .max = IGDNG_P1_MAX }, + .p2 = { .dot_limit = IGDNG_P2_DOT_LIMIT, + .p2_slow = IGDNG_P2_SDVO_DAC_SLOW, + .p2_fast = IGDNG_P2_SDVO_DAC_FAST }, + .find_pll = intel_igdng_find_best_PLL, + }, + { /* INTEL_LIMIT_IGDNG_LVDS */ + .dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX }, + .vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX }, + .n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX }, + .m = { .min = IGDNG_M_MIN, .max = IGDNG_M_MAX }, + .m1 = { .min = IGDNG_M1_MIN, .max = IGDNG_M1_MAX }, + .m2 = { .min = IGDNG_M2_MIN, .max = IGDNG_M2_MAX }, + .p = { .min = IGDNG_P_LVDS_MIN, .max = IGDNG_P_LVDS_MAX }, + .p1 = { .min = IGDNG_P1_MIN, .max = IGDNG_P1_MAX }, + .p2 = { .dot_limit = IGDNG_P2_DOT_LIMIT, + .p2_slow = IGDNG_P2_LVDS_SLOW, + .p2_fast = IGDNG_P2_LVDS_FAST }, + .find_pll = intel_igdng_find_best_PLL, + }, }; +static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc) +{ + const intel_limit_t *limit; + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + limit = &intel_limits[INTEL_LIMIT_IGDNG_LVDS]; + else + limit = &intel_limits[INTEL_LIMIT_IGDNG_SDVO_DAC]; + + return limit; +} + static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -418,7 +489,9 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; const intel_limit_t *limit; - if (IS_G4X(dev)) { + if (IS_IGDNG(dev)) + limit = intel_igdng_limit(crtc); + else if (IS_G4X(dev)) { limit = intel_g4x_limit(crtc); } else if (IS_I9XX(dev) && !IS_IGD(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) @@ -630,7 +703,64 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, } } } + return found; +} + +static bool +intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *best_clock) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + intel_clock_t clock; + int max_n; + bool found; + int err_most = 47; + found = false; + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { + if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == + LVDS_CLKB_POWER_UP) + clock.p2 = limit->p2.p2_fast; + else + clock.p2 = limit->p2.p2_slow; + } else { + if (target < limit->p2.dot_limit) + clock.p2 = limit->p2.p2_slow; + else + clock.p2 = limit->p2.p2_fast; + } + + memset(best_clock, 0, sizeof(*best_clock)); + max_n = limit->n.max; + /* based on hardware requriment prefer smaller n to precision */ + for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { + /* based on hardware requirment prefere larger m1,m2, p1 */ + for (clock.m1 = limit->m1.max; + clock.m1 >= limit->m1.min; clock.m1--) { + for (clock.m2 = limit->m2.max; + clock.m2 >= limit->m2.min; clock.m2--) { + for (clock.p1 = limit->p1.max; + clock.p1 >= limit->p1.min; clock.p1--) { + int this_err; + intel_clock(dev, refclk, &clock); + if (!intel_PLL_is_valid(crtc, &clock)) + continue; + this_err = abs((10000 - (target*10000/clock.dot))); + if (this_err < err_most) { + *best_clock = clock; + err_most = this_err; + max_n = clock.n; + found = true; + /* found on first matching */ + goto out; + } + } + } + } + } +out: return found; } @@ -785,18 +915,292 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return 0; } +static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int plane = intel_crtc->pipe; + int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; + int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR; + int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; + int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; + int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR; + int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR; + int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF; + int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1; + int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; + int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; + int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; + int cpu_vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; + int cpu_vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; + int cpu_vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; + int trans_htot_reg = (pipe == 0) ? TRANS_HTOTAL_A : TRANS_HTOTAL_B; + int trans_hblank_reg = (pipe == 0) ? TRANS_HBLANK_A : TRANS_HBLANK_B; + int trans_hsync_reg = (pipe == 0) ? TRANS_HSYNC_A : TRANS_HSYNC_B; + int trans_vtot_reg = (pipe == 0) ? TRANS_VTOTAL_A : TRANS_VTOTAL_B; + int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B; + int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B; + u32 temp; + int tries = 5, j; + /* XXX: When our outputs are all unaware of DPMS modes other than off + * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. + */ + switch (mode) { + case DRM_MODE_DPMS_ON: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + DRM_DEBUG("crtc %d dpms on\n", pipe); + /* enable PCH DPLL */ + temp = I915_READ(pch_dpll_reg); + if ((temp & DPLL_VCO_ENABLE) == 0) { + I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE); + I915_READ(pch_dpll_reg); + } -/** - * Sets the power management mode of the pipe and plane. - * - * This code should probably grow support for turning the cursor off and back - * on appropriately at the same time as we're turning the pipe off/on. - */ -static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) + /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ + temp = I915_READ(fdi_rx_reg); + I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE | + FDI_SEL_PCDCLK | + FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */ + I915_READ(fdi_rx_reg); + udelay(200); + + /* Enable CPU FDI TX PLL, always on for IGDNG */ + temp = I915_READ(fdi_tx_reg); + if ((temp & FDI_TX_PLL_ENABLE) == 0) { + I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE); + I915_READ(fdi_tx_reg); + udelay(100); + } + + /* Enable CPU pipe */ + temp = I915_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) == 0) { + I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); + I915_READ(pipeconf_reg); + udelay(100); + } + + /* configure and enable CPU plane */ + temp = I915_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + } + + /* enable CPU FDI TX and PCH FDI RX */ + temp = I915_READ(fdi_tx_reg); + temp |= FDI_TX_ENABLE; + temp |= FDI_DP_PORT_WIDTH_X4; /* default */ + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + I915_WRITE(fdi_tx_reg, temp); + I915_READ(fdi_tx_reg); + + temp = I915_READ(fdi_rx_reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE); + I915_READ(fdi_rx_reg); + + udelay(150); + + /* Train FDI. */ + /* umask FDI RX Interrupt symbol_lock and bit_lock bit + for train result */ + temp = I915_READ(fdi_rx_imr_reg); + temp &= ~FDI_RX_SYMBOL_LOCK; + temp &= ~FDI_RX_BIT_LOCK; + I915_WRITE(fdi_rx_imr_reg, temp); + I915_READ(fdi_rx_imr_reg); + udelay(150); + + temp = I915_READ(fdi_rx_iir_reg); + DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp); + + if ((temp & FDI_RX_BIT_LOCK) == 0) { + for (j = 0; j < tries; j++) { + temp = I915_READ(fdi_rx_iir_reg); + DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp); + if (temp & FDI_RX_BIT_LOCK) + break; + udelay(200); + } + if (j != tries) + I915_WRITE(fdi_rx_iir_reg, + temp | FDI_RX_BIT_LOCK); + else + DRM_DEBUG("train 1 fail\n"); + } else { + I915_WRITE(fdi_rx_iir_reg, + temp | FDI_RX_BIT_LOCK); + DRM_DEBUG("train 1 ok 2!\n"); + } + temp = I915_READ(fdi_tx_reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_2; + I915_WRITE(fdi_tx_reg, temp); + + temp = I915_READ(fdi_rx_reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_2; + I915_WRITE(fdi_rx_reg, temp); + + udelay(150); + + temp = I915_READ(fdi_rx_iir_reg); + DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp); + + if ((temp & FDI_RX_SYMBOL_LOCK) == 0) { + for (j = 0; j < tries; j++) { + temp = I915_READ(fdi_rx_iir_reg); + DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp); + if (temp & FDI_RX_SYMBOL_LOCK) + break; + udelay(200); + } + if (j != tries) { + I915_WRITE(fdi_rx_iir_reg, + temp | FDI_RX_SYMBOL_LOCK); + DRM_DEBUG("train 2 ok 1!\n"); + } else + DRM_DEBUG("train 2 fail\n"); + } else { + I915_WRITE(fdi_rx_iir_reg, temp | FDI_RX_SYMBOL_LOCK); + DRM_DEBUG("train 2 ok 2!\n"); + } + DRM_DEBUG("train done\n"); + + /* set transcoder timing */ + I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg)); + I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg)); + I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg)); + + I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg)); + I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg)); + I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg)); + + /* enable PCH transcoder */ + temp = I915_READ(transconf_reg); + I915_WRITE(transconf_reg, temp | TRANS_ENABLE); + I915_READ(transconf_reg); + + while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0) + ; + + /* enable normal */ + + temp = I915_READ(fdi_tx_reg); + temp &= ~FDI_LINK_TRAIN_NONE; + I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE | + FDI_TX_ENHANCE_FRAME_ENABLE); + I915_READ(fdi_tx_reg); + + temp = I915_READ(fdi_rx_reg); + temp &= ~FDI_LINK_TRAIN_NONE; + I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE | + FDI_RX_ENHANCE_FRAME_ENABLE); + I915_READ(fdi_rx_reg); + + /* wait one idle pattern time */ + udelay(100); + + intel_crtc_load_lut(crtc); + + break; + case DRM_MODE_DPMS_OFF: + DRM_DEBUG("crtc %d dpms off\n", pipe); + + /* Disable the VGA plane that we never use */ + I915_WRITE(CPU_VGACNTRL, VGA_DISP_DISABLE); + + /* Disable display plane */ + temp = I915_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) { + I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + I915_READ(dspbase_reg); + } + + /* disable cpu pipe, disable after all planes disabled */ + temp = I915_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) != 0) { + I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); + I915_READ(pipeconf_reg); + /* wait for cpu pipe off, pipe state */ + while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0) + ; + } else + DRM_DEBUG("crtc %d is disabled\n", pipe); + + /* IGDNG-A : disable cpu panel fitter ? */ + temp = I915_READ(pf_ctl_reg); + if ((temp & PF_ENABLE) != 0) { + I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE); + I915_READ(pf_ctl_reg); + } + + /* disable CPU FDI tx and PCH FDI rx */ + temp = I915_READ(fdi_tx_reg); + I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE); + I915_READ(fdi_tx_reg); + + temp = I915_READ(fdi_rx_reg); + I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE); + I915_READ(fdi_rx_reg); + + /* still set train pattern 1 */ + temp = I915_READ(fdi_tx_reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + I915_WRITE(fdi_tx_reg, temp); + + temp = I915_READ(fdi_rx_reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + I915_WRITE(fdi_rx_reg, temp); + + /* disable PCH transcoder */ + temp = I915_READ(transconf_reg); + if ((temp & TRANS_ENABLE) != 0) { + I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE); + I915_READ(transconf_reg); + /* wait for PCH transcoder off, transcoder state */ + while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0) + ; + } + + /* disable PCH DPLL */ + temp = I915_READ(pch_dpll_reg); + if ((temp & DPLL_VCO_ENABLE) != 0) { + I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE); + I915_READ(pch_dpll_reg); + } + + temp = I915_READ(fdi_rx_reg); + if ((temp & FDI_RX_PLL_ENABLE) != 0) { + temp &= ~FDI_SEL_PCDCLK; + temp &= ~FDI_RX_PLL_ENABLE; + I915_WRITE(fdi_rx_reg, temp); + I915_READ(fdi_rx_reg); + } + + /* Wait for the clocks to turn off. */ + udelay(150); + break; + } +} + +static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) { struct drm_device *dev = crtc->dev; - struct drm_i915_master_private *master_priv; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; @@ -805,7 +1209,6 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) int dspbase_reg = (pipe == 0) ? DSPAADDR : DSPBADDR; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; u32 temp; - bool enabled; /* XXX: When our outputs are all unaware of DPMS modes other than off * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. @@ -890,6 +1293,26 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) udelay(150); break; } +} + +/** + * Sets the power management mode of the pipe and plane. + * + * This code should probably grow support for turning the cursor off and back + * on appropriately at the same time as we're turning the pipe off/on. + */ +static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_master_private *master_priv; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + bool enabled; + + if (IS_IGDNG(dev)) + igdng_crtc_dpms(crtc, mode); + else + i9xx_crtc_dpms(crtc, mode); if (!dev->primary->master) return; @@ -947,6 +1370,12 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { + struct drm_device *dev = crtc->dev; + if (IS_IGDNG(dev)) { + /* FDI link clock is fixed at 2.7G */ + if (mode->clock * 3 > 27000 * 4) + return MODE_CLOCK_HIGH; + } return true; } @@ -1030,6 +1459,48 @@ static int intel_panel_fitter_pipe (struct drm_device *dev) return 1; } +struct fdi_m_n { + u32 tu; + u32 gmch_m; + u32 gmch_n; + u32 link_m; + u32 link_n; +}; + +static void +fdi_reduce_ratio(u32 *num, u32 *den) +{ + while (*num > 0xffffff || *den > 0xffffff) { + *num >>= 1; + *den >>= 1; + } +} + +#define DATA_N 0x800000 +#define LINK_N 0x80000 + +static void +igdng_compute_m_n(int bytes_per_pixel, int nlanes, + int pixel_clock, int link_clock, + struct fdi_m_n *m_n) +{ + u64 temp; + + m_n->tu = 64; /* default size */ + + temp = (u64) DATA_N * pixel_clock; + temp = div_u64(temp, link_clock); + m_n->gmch_m = (temp * bytes_per_pixel) / nlanes; + m_n->gmch_n = DATA_N; + fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); + + temp = (u64) LINK_N * pixel_clock; + m_n->link_m = div_u64(temp, link_clock); + m_n->link_n = LINK_N; + fdi_reduce_ratio(&m_n->link_m, &m_n->link_n); +} + + static int intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -1063,6 +1534,16 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_connector *connector; const intel_limit_t *limit; int ret; + struct fdi_m_n m_n = {0}; + int data_m1_reg = (pipe == 0) ? PIPEA_DATA_M1 : PIPEB_DATA_M1; + int data_n1_reg = (pipe == 0) ? PIPEA_DATA_N1 : PIPEB_DATA_N1; + int link_m1_reg = (pipe == 0) ? PIPEA_LINK_M1 : PIPEB_LINK_M1; + int link_n1_reg = (pipe == 0) ? PIPEA_LINK_N1 : PIPEB_LINK_N1; + int pch_fp_reg = (pipe == 0) ? PCH_FPA0 : PCH_FPB0; + int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; + int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; + u32 temp; + int sdvo_pixel_multiply; drm_vblank_pre_modeset(dev, pipe); @@ -1101,6 +1582,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, DRM_DEBUG("using SSC reference clock of %d MHz\n", refclk / 1000); } else if (IS_I9XX(dev)) { refclk = 96000; + if (IS_IGDNG(dev)) + refclk = 120000; /* 120Mhz refclk */ } else { refclk = 48000; } @@ -1137,12 +1620,21 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } } + /* FDI link */ + if (IS_IGDNG(dev)) + igdng_compute_m_n(3, 4, /* lane num 4 */ + adjusted_mode->clock, + 270000, /* lane clock */ + &m_n); + if (IS_IGD(dev)) fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2; else fp = clock.n << 16 | clock.m1 << 8 | clock.m2; - dpll = DPLL_VGA_MODE_DIS; + if (!IS_IGDNG(dev)) + dpll = DPLL_VGA_MODE_DIS; + if (IS_I9XX(dev)) { if (is_lvds) dpll |= DPLLB_MODE_LVDS; @@ -1150,17 +1642,22 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, dpll |= DPLLB_MODE_DAC_SERIAL; if (is_sdvo) { dpll |= DPLL_DVO_HIGH_SPEED; - if (IS_I945G(dev) || IS_I945GM(dev)) { - int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + if (IS_I945G(dev) || IS_I945GM(dev)) dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; - } + else if (IS_IGDNG(dev)) + dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; } /* compute bitmask from p1 value */ if (IS_IGD(dev)) dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_IGD; - else + else { dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + /* also FPA1 */ + if (IS_IGDNG(dev)) + dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; + } switch (clock.p2) { case 5: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; @@ -1175,7 +1672,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } - if (IS_I965G(dev)) + if (IS_I965G(dev) && !IS_IGDNG(dev)) dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); } else { if (is_lvds) { @@ -1207,10 +1704,14 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; - if (pipe == 0) - dspcntr |= DISPPLANE_SEL_PIPE_A; - else - dspcntr |= DISPPLANE_SEL_PIPE_B; + /* IGDNG's plane is forced to pipe, bit 24 is to + enable color space conversion */ + if (!IS_IGDNG(dev)) { + if (pipe == 0) + dspcntr |= DISPPLANE_SEL_PIPE_A; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; + } if (pipe == 0 && !IS_I965G(dev)) { /* Enable pixel doubling when the dot clock is > 90% of the (display) @@ -1231,12 +1732,17 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* Disable the panel fitter if it was on our pipe */ - if (intel_panel_fitter_pipe(dev) == pipe) + if (!IS_IGDNG(dev) && intel_panel_fitter_pipe(dev) == pipe) I915_WRITE(PFIT_CONTROL, 0); DRM_DEBUG("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); drm_mode_debug_printmodeline(mode); + /* assign to IGDNG registers */ + if (IS_IGDNG(dev)) { + fp_reg = pch_fp_reg; + dpll_reg = pch_dpll_reg; + } if (dpll & DPLL_VCO_ENABLE) { I915_WRITE(fp_reg, fp); @@ -1245,6 +1751,22 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, udelay(150); } + if (IS_IGDNG(dev)) { + /* enable PCH clock reference source */ + /* XXX need to change the setting for other outputs */ + u32 temp; + temp = I915_READ(PCH_DREF_CONTROL); + temp &= ~DREF_NONSPREAD_SOURCE_MASK; + temp |= DREF_NONSPREAD_CK505_ENABLE; + temp &= ~DREF_SSC_SOURCE_MASK; + temp |= DREF_SSC_SOURCE_ENABLE; + temp &= ~DREF_SSC1_ENABLE; + /* if no eDP, disable source output to CPU */ + temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; + temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + } + /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. @@ -1276,8 +1798,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* Wait for the clocks to stabilize. */ udelay(150); - if (IS_I965G(dev)) { - int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + if (IS_I965G(dev) && !IS_IGDNG(dev)) { + sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); } else { @@ -1303,9 +1825,25 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* pipesrc and dspsize control the size that is scaled from, which should * always be the user's requested size. */ - I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); - I915_WRITE(dsppos_reg, 0); + if (!IS_IGDNG(dev)) { + I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | + (mode->hdisplay - 1)); + I915_WRITE(dsppos_reg, 0); + } I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); + + if (IS_IGDNG(dev)) { + I915_WRITE(data_m1_reg, TU_SIZE(m_n.tu) | m_n.gmch_m); + I915_WRITE(data_n1_reg, TU_SIZE(m_n.tu) | m_n.gmch_n); + I915_WRITE(link_m1_reg, m_n.link_m); + I915_WRITE(link_n1_reg, m_n.link_n); + + /* enable FDI RX PLL too */ + temp = I915_READ(fdi_rx_reg); + I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE); + udelay(200); + } + I915_WRITE(pipeconf_reg, pipeconf); I915_READ(pipeconf_reg); @@ -1336,6 +1874,11 @@ void intel_crtc_load_lut(struct drm_crtc *crtc) if (!crtc->enabled) return; + /* use legacy palette for IGDNG */ + if (IS_IGDNG(dev)) + palreg = (intel_crtc->pipe == 0) ? LGC_PALETTE_A : + LGC_PALETTE_B; + for (i = 0; i < 256; i++) { I915_WRITE(palreg + 4 * i, (intel_crtc->lut_r[i] << 16) | @@ -1885,10 +2428,12 @@ static void intel_setup_outputs(struct drm_device *dev) intel_crt_init(dev); /* Set up integrated LVDS */ - if (IS_MOBILE(dev) && !IS_I830(dev)) + if (IS_MOBILE(dev) && !IS_I830(dev) && !IS_IGDNG(dev)) intel_lvds_init(dev); - if (IS_I9XX(dev)) { + if (IS_IGDNG(dev)) { + /* ignore for other outputs */ + } else if (IS_I9XX(dev)) { int found; u32 reg; @@ -1912,7 +2457,7 @@ static void intel_setup_outputs(struct drm_device *dev) } else intel_dvo_init(dev); - if (IS_I9XX(dev) && IS_MOBILE(dev)) + if (IS_I9XX(dev) && IS_MOBILE(dev) && !IS_IGDNG(dev)) intel_tv_init(dev); list_for_each_entry(connector, &dev->mode_config.connector_list, head) { -- cgit v1.2.3 From 30ad48b7334a2eb2edf22f6c91f7b3f22a22a837 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 5 Jun 2009 15:38:43 +0800 Subject: drm/i915: Add HDMI support on IGDNG Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 17 ++++++++++++++++- drivers/gpu/drm/i915/intel_hdmi.c | 33 +++++++++++++++++++++++++++++++-- 2 files changed, 47 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2cd6ba6523d8..53cf6efa67b6 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2432,7 +2432,22 @@ static void intel_setup_outputs(struct drm_device *dev) intel_lvds_init(dev); if (IS_IGDNG(dev)) { - /* ignore for other outputs */ + int found; + + if (I915_READ(HDMIB) & PORT_DETECTED) { + /* check SDVOB */ + /* found = intel_sdvo_init(dev, HDMIB); */ + found = 0; + if (!found) + intel_hdmi_init(dev, HDMIB); + } + + if (I915_READ(HDMIC) & PORT_DETECTED) + intel_hdmi_init(dev, HDMIC); + + if (I915_READ(HDMID) & PORT_DETECTED) + intel_hdmi_init(dev, HDMID); + } else if (IS_I9XX(dev)) { int found; u32 reg; diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index d0983bb93a18..d874b0c4b065 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -56,7 +56,8 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder, sdvox = SDVO_ENCODING_HDMI | SDVO_BORDER_ENABLE | SDVO_VSYNC_ACTIVE_HIGH | - SDVO_HSYNC_ACTIVE_HIGH; + SDVO_HSYNC_ACTIVE_HIGH | + SDVO_NULL_PACKETS_DURING_VSYNC; if (hdmi_priv->has_hdmi_sink) sdvox |= SDVO_AUDIO_ENABLE; @@ -144,6 +145,22 @@ intel_hdmi_sink_detect(struct drm_connector *connector) } } +static enum drm_connector_status +igdng_hdmi_detect(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv; + + /* FIXME hotplug detect */ + + hdmi_priv->has_hdmi_sink = false; + intel_hdmi_sink_detect(connector); + if (hdmi_priv->has_hdmi_sink) + return connector_status_connected; + else + return connector_status_disconnected; +} + static enum drm_connector_status intel_hdmi_detect(struct drm_connector *connector) { @@ -153,6 +170,9 @@ intel_hdmi_detect(struct drm_connector *connector) struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv; u32 temp, bit; + if (IS_IGDNG(dev)) + return igdng_hdmi_detect(connector); + temp = I915_READ(PORT_HOTPLUG_EN); switch (hdmi_priv->sdvox_reg) { @@ -268,8 +288,17 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg) /* Set up the DDC bus. */ if (sdvox_reg == SDVOB) intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB"); - else + else if (sdvox_reg == SDVOC) intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC"); + else if (sdvox_reg == HDMIB) + intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE, + "HDMIB"); + else if (sdvox_reg == HDMIC) + intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD, + "HDMIC"); + else if (sdvox_reg == HDMID) + intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF, + "HDMID"); if (!intel_output->ddc_bus) goto err_connector; -- cgit v1.2.3 From 541998a18b72d2cac48b3369fa4540116ff3f0a8 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 5 Jun 2009 15:38:44 +0800 Subject: drm/i915: Add LVDS support for IGDNG Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 13 ++-- drivers/gpu/drm/i915/intel_lvds.c | 127 +++++++++++++++++++++++++++++------ 2 files changed, 114 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 53cf6efa67b6..05bd97e3e3e0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1542,6 +1542,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, int pch_fp_reg = (pipe == 0) ? PCH_FPA0 : PCH_FPB0; int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; + int lvds_reg = LVDS; u32 temp; int sdvo_pixel_multiply; @@ -1772,8 +1773,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, * things on. */ if (is_lvds) { - u32 lvds = I915_READ(LVDS); + u32 lvds; + if (IS_IGDNG(dev)) + lvds_reg = PCH_LVDS; + + lvds = I915_READ(lvds_reg); lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. @@ -1788,8 +1793,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, * panels behave in the two modes. */ - I915_WRITE(LVDS, lvds); - I915_READ(LVDS); + I915_WRITE(lvds_reg, lvds); + I915_READ(lvds_reg); } I915_WRITE(fp_reg, fp); @@ -2428,7 +2433,7 @@ static void intel_setup_outputs(struct drm_device *dev) intel_crt_init(dev); /* Set up integrated LVDS */ - if (IS_MOBILE(dev) && !IS_I830(dev) && !IS_IGDNG(dev)) + if (IS_MOBILE(dev) && !IS_I830(dev)) intel_lvds_init(dev); if (IS_IGDNG(dev)) { diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 53731f0ffcb5..eea3a548b82a 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -45,10 +45,15 @@ static void intel_lvds_set_backlight(struct drm_device *dev, int level) { struct drm_i915_private *dev_priv = dev->dev_private; - u32 blc_pwm_ctl; + u32 blc_pwm_ctl, reg; - blc_pwm_ctl = I915_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; - I915_WRITE(BLC_PWM_CTL, (blc_pwm_ctl | + if (IS_IGDNG(dev)) + reg = BLC_PWM_CPU_CTL; + else + reg = BLC_PWM_CTL; + + blc_pwm_ctl = I915_READ(reg) & ~BACKLIGHT_DUTY_CYCLE_MASK; + I915_WRITE(reg, (blc_pwm_ctl | (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); } @@ -58,8 +63,14 @@ static void intel_lvds_set_backlight(struct drm_device *dev, int level) static u32 intel_lvds_get_max_backlight(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg; + + if (IS_IGDNG(dev)) + reg = BLC_PWM_PCH_CTL2; + else + reg = BLC_PWM_CTL; - return ((I915_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >> + return ((I915_READ(reg) & BACKLIGHT_MODULATION_FREQ_MASK) >> BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; } @@ -69,23 +80,31 @@ static u32 intel_lvds_get_max_backlight(struct drm_device *dev) static void intel_lvds_set_power(struct drm_device *dev, bool on) { struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp_status; + u32 pp_status, ctl_reg, status_reg; + + if (IS_IGDNG(dev)) { + ctl_reg = PCH_PP_CONTROL; + status_reg = PCH_PP_STATUS; + } else { + ctl_reg = PP_CONTROL; + status_reg = PP_STATUS; + } if (on) { - I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | + I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); do { - pp_status = I915_READ(PP_STATUS); + pp_status = I915_READ(status_reg); } while ((pp_status & PP_ON) == 0); intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle); } else { intel_lvds_set_backlight(dev, 0); - I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & + I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); do { - pp_status = I915_READ(PP_STATUS); + pp_status = I915_READ(status_reg); } while (pp_status & PP_ON); } } @@ -106,12 +125,28 @@ static void intel_lvds_save(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg; + u32 pwm_ctl_reg; + + if (IS_IGDNG(dev)) { + pp_on_reg = PCH_PP_ON_DELAYS; + pp_off_reg = PCH_PP_OFF_DELAYS; + pp_ctl_reg = PCH_PP_CONTROL; + pp_div_reg = PCH_PP_DIVISOR; + pwm_ctl_reg = BLC_PWM_CPU_CTL; + } else { + pp_on_reg = PP_ON_DELAYS; + pp_off_reg = PP_OFF_DELAYS; + pp_ctl_reg = PP_CONTROL; + pp_div_reg = PP_DIVISOR; + pwm_ctl_reg = BLC_PWM_CTL; + } - dev_priv->savePP_ON = I915_READ(PP_ON_DELAYS); - dev_priv->savePP_OFF = I915_READ(PP_OFF_DELAYS); - dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); - dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); - dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->savePP_ON = I915_READ(pp_on_reg); + dev_priv->savePP_OFF = I915_READ(pp_off_reg); + dev_priv->savePP_CONTROL = I915_READ(pp_ctl_reg); + dev_priv->savePP_DIVISOR = I915_READ(pp_div_reg); + dev_priv->saveBLC_PWM_CTL = I915_READ(pwm_ctl_reg); dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & BACKLIGHT_DUTY_CYCLE_MASK); @@ -127,12 +162,28 @@ static void intel_lvds_restore(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg; + u32 pwm_ctl_reg; + + if (IS_IGDNG(dev)) { + pp_on_reg = PCH_PP_ON_DELAYS; + pp_off_reg = PCH_PP_OFF_DELAYS; + pp_ctl_reg = PCH_PP_CONTROL; + pp_div_reg = PCH_PP_DIVISOR; + pwm_ctl_reg = BLC_PWM_CPU_CTL; + } else { + pp_on_reg = PP_ON_DELAYS; + pp_off_reg = PP_OFF_DELAYS; + pp_ctl_reg = PP_CONTROL; + pp_div_reg = PP_DIVISOR; + pwm_ctl_reg = BLC_PWM_CTL; + } - I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); - I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON); - I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF); - I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); - I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + I915_WRITE(pwm_ctl_reg, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(pp_on_reg, dev_priv->savePP_ON); + I915_WRITE(pp_off_reg, dev_priv->savePP_OFF); + I915_WRITE(pp_div_reg, dev_priv->savePP_DIVISOR); + I915_WRITE(pp_ctl_reg, dev_priv->savePP_CONTROL); if (dev_priv->savePP_CONTROL & POWER_TARGET_ON) intel_lvds_set_power(dev, true); else @@ -216,8 +267,14 @@ static void intel_lvds_prepare(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg; - dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + if (IS_IGDNG(dev)) + reg = BLC_PWM_CPU_CTL; + else + reg = BLC_PWM_CTL; + + dev_priv->saveBLC_PWM_CTL = I915_READ(reg); dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & BACKLIGHT_DUTY_CYCLE_MASK); @@ -251,6 +308,10 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, * settings. */ + /* No panel fitting yet, fixme */ + if (IS_IGDNG(dev)) + return; + /* * Enable automatic panel scaling so that non-native modes fill the * screen. Should be enabled before the pipe is enabled, according to @@ -446,12 +507,18 @@ void intel_lvds_init(struct drm_device *dev) struct drm_display_mode *scan; /* *modes, *bios_mode; */ struct drm_crtc *crtc; u32 lvds; - int pipe; + int pipe, gpio = GPIOC; /* Skip init on machines we know falsely report LVDS */ if (dmi_check_system(intel_no_lvds)) return; + if (IS_IGDNG(dev)) { + if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0) + return; + gpio = PCH_GPIOC; + } + intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); if (!intel_output) { return; @@ -486,7 +553,7 @@ void intel_lvds_init(struct drm_device *dev) */ /* Set up the DDC bus. */ - intel_output->ddc_bus = intel_i2c_create(dev, GPIOC, "LVDSDDC_C"); + intel_output->ddc_bus = intel_i2c_create(dev, gpio, "LVDSDDC_C"); if (!intel_output->ddc_bus) { dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " "failed.\n"); @@ -528,6 +595,11 @@ void intel_lvds_init(struct drm_device *dev) * on. If so, assume that whatever is currently programmed is the * correct mode. */ + + /* IGDNG: FIXME if still fail, not try pipe mode now */ + if (IS_IGDNG(dev)) + goto failed; + lvds = I915_READ(LVDS); pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; crtc = intel_get_crtc_from_pipe(dev, pipe); @@ -546,6 +618,17 @@ void intel_lvds_init(struct drm_device *dev) goto failed; out: + if (IS_IGDNG(dev)) { + u32 pwm; + /* make sure PWM is enabled */ + pwm = I915_READ(BLC_PWM_CPU_CTL2); + pwm |= (PWM_ENABLE | PWM_PIPE_B); + I915_WRITE(BLC_PWM_CPU_CTL2, pwm); + + pwm = I915_READ(BLC_PWM_PCH_CTL1); + pwm |= PWM_PCH_ENABLE; + I915_WRITE(BLC_PWM_PCH_CTL1, pwm); + } drm_sysfs_connector_add(connector); return; -- cgit v1.2.3 From cb66c692d1ae257f32dc7f6085cf9cb9f2f6bab8 Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Sun, 31 May 2009 16:58:32 +0800 Subject: drm/i915: Set correct TV detection voltage level override values We detect TV connect status by setting DAC voltage level override values as 0.7 voltage for DAC_A/B/C. The corresponding 2-bits shold be 0x2, In order correctly to set last bit as 0, at first we must clean it. It fixed freedesktop.org bug #21204 Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 6 +++--- drivers/gpu/drm/i915/intel_tv.c | 3 +++ 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 99681cfb7ab9..79df9e9c38e4 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -958,15 +958,15 @@ # define DAC_A_1_3_V (0 << 4) # define DAC_A_1_1_V (1 << 4) # define DAC_A_0_7_V (2 << 4) -# define DAC_A_OFF (3 << 4) +# define DAC_A_MASK (3 << 4) # define DAC_B_1_3_V (0 << 2) # define DAC_B_1_1_V (1 << 2) # define DAC_B_0_7_V (2 << 2) -# define DAC_B_OFF (3 << 2) +# define DAC_B_MASK (3 << 2) # define DAC_C_1_3_V (0 << 0) # define DAC_C_1_1_V (1 << 0) # define DAC_C_0_7_V (2 << 0) -# define DAC_C_OFF (3 << 0) +# define DAC_C_MASK (3 << 0) /** * CSC coefficients are stored in a floating point format with 9 bits of diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index d2c32983242d..c7d9ef01dbf6 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1392,6 +1392,9 @@ intel_tv_detect_type (struct drm_crtc *crtc, struct intel_output *intel_output) tv_ctl &= ~TV_TEST_MODE_MASK; tv_ctl |= TV_TEST_MODE_MONITOR_DETECT; tv_dac &= ~TVDAC_SENSE_MASK; + tv_dac &= ~DAC_A_MASK; + tv_dac &= ~DAC_B_MASK; + tv_dac &= ~DAC_C_MASK; tv_dac |= (TVDAC_STATE_CHG_EN | TVDAC_A_SENSE_CTL | TVDAC_B_SENSE_CTL | -- cgit v1.2.3 From 2245fda810f870dce9b030e6aa604320abba53a5 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 30 May 2009 20:42:29 -0700 Subject: drm/i915: Don't trim cursor addresses to 11 bits We can safely assume that cursor addresses will not extend beyond the addressable screen dimensions; setting the additional bits is harmless in any case. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 05bd97e3e3e0..c5c45827ca01 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2012,16 +2012,16 @@ static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) uint32_t adder; if (x < 0) { - temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); + temp |= CURSOR_POS_SIGN << CURSOR_X_SHIFT; x = -x; } if (y < 0) { - temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); + temp |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT; y = -y; } - temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); - temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); + temp |= x << CURSOR_X_SHIFT; + temp |= y << CURSOR_Y_SHIFT; adder = intel_crtc->cursor_addr; I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); -- cgit v1.2.3 From 040d87f15a0129242463d3ed7c48381505f596e2 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 30 May 2009 20:42:33 -0700 Subject: drm/i915: Add Display Port register defines This adds the register definitions for the display port enable register along with those for the GMCH and Link M/N ratios required to drive display port outputs. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 163 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 163 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 79df9e9c38e4..f6237a0b1133 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -638,8 +638,11 @@ /* Hotplug control (945+ only) */ #define PORT_HOTPLUG_EN 0x61110 #define HDMIB_HOTPLUG_INT_EN (1 << 29) +#define DPB_HOTPLUG_INT_EN (1 << 29) #define HDMIC_HOTPLUG_INT_EN (1 << 28) +#define DPC_HOTPLUG_INT_EN (1 << 28) #define HDMID_HOTPLUG_INT_EN (1 << 27) +#define DPD_HOTPLUG_INT_EN (1 << 27) #define SDVOB_HOTPLUG_INT_EN (1 << 26) #define SDVOC_HOTPLUG_INT_EN (1 << 25) #define TV_HOTPLUG_INT_EN (1 << 18) @@ -672,8 +675,11 @@ #define PORT_HOTPLUG_STAT 0x61114 #define HDMIB_HOTPLUG_INT_STATUS (1 << 29) +#define DPB_HOTPLUG_INT_STATUS (1 << 29) #define HDMIC_HOTPLUG_INT_STATUS (1 << 28) +#define DPC_HOTPLUG_INT_STATUS (1 << 28) #define HDMID_HOTPLUG_INT_STATUS (1 << 27) +#define DPD_HOTPLUG_INT_STATUS (1 << 27) #define CRT_HOTPLUG_INT_STATUS (1 << 11) #define TV_HOTPLUG_INT_STATUS (1 << 10) #define CRT_HOTPLUG_MONITOR_MASK (3 << 8) @@ -1335,6 +1341,163 @@ #define TV_V_CHROMA_0 0x68400 #define TV_V_CHROMA_42 0x684a8 +/* Display Port */ +#define DP_B 0x64100 +#define DP_C 0x64200 +#define DP_D 0x64300 + +#define DP_PORT_EN (1 << 31) +#define DP_PIPEB_SELECT (1 << 30) + +/* Link training mode - select a suitable mode for each stage */ +#define DP_LINK_TRAIN_PAT_1 (0 << 28) +#define DP_LINK_TRAIN_PAT_2 (1 << 28) +#define DP_LINK_TRAIN_PAT_IDLE (2 << 28) +#define DP_LINK_TRAIN_OFF (3 << 28) +#define DP_LINK_TRAIN_MASK (3 << 28) +#define DP_LINK_TRAIN_SHIFT 28 + +/* Signal voltages. These are mostly controlled by the other end */ +#define DP_VOLTAGE_0_4 (0 << 25) +#define DP_VOLTAGE_0_6 (1 << 25) +#define DP_VOLTAGE_0_8 (2 << 25) +#define DP_VOLTAGE_1_2 (3 << 25) +#define DP_VOLTAGE_MASK (7 << 25) +#define DP_VOLTAGE_SHIFT 25 + +/* Signal pre-emphasis levels, like voltages, the other end tells us what + * they want + */ +#define DP_PRE_EMPHASIS_0 (0 << 22) +#define DP_PRE_EMPHASIS_3_5 (1 << 22) +#define DP_PRE_EMPHASIS_6 (2 << 22) +#define DP_PRE_EMPHASIS_9_5 (3 << 22) +#define DP_PRE_EMPHASIS_MASK (7 << 22) +#define DP_PRE_EMPHASIS_SHIFT 22 + +/* How many wires to use. I guess 3 was too hard */ +#define DP_PORT_WIDTH_1 (0 << 19) +#define DP_PORT_WIDTH_2 (1 << 19) +#define DP_PORT_WIDTH_4 (3 << 19) +#define DP_PORT_WIDTH_MASK (7 << 19) + +/* Mystic DPCD version 1.1 special mode */ +#define DP_ENHANCED_FRAMING (1 << 18) + +/** locked once port is enabled */ +#define DP_PORT_REVERSAL (1 << 15) + +/** sends the clock on lane 15 of the PEG for debug */ +#define DP_CLOCK_OUTPUT_ENABLE (1 << 13) + +#define DP_SCRAMBLING_DISABLE (1 << 12) + +/** limit RGB values to avoid confusing TVs */ +#define DP_COLOR_RANGE_16_235 (1 << 8) + +/** Turn on the audio link */ +#define DP_AUDIO_OUTPUT_ENABLE (1 << 6) + +/** vs and hs sync polarity */ +#define DP_SYNC_VS_HIGH (1 << 4) +#define DP_SYNC_HS_HIGH (1 << 3) + +/** A fantasy */ +#define DP_DETECTED (1 << 2) + +/** The aux channel provides a way to talk to the + * signal sink for DDC etc. Max packet size supported + * is 20 bytes in each direction, hence the 5 fixed + * data registers + */ +#define DPB_AUX_CH_CTL 0x64110 +#define DPB_AUX_CH_DATA1 0x64114 +#define DPB_AUX_CH_DATA2 0x64118 +#define DPB_AUX_CH_DATA3 0x6411c +#define DPB_AUX_CH_DATA4 0x64120 +#define DPB_AUX_CH_DATA5 0x64124 + +#define DPC_AUX_CH_CTL 0x64210 +#define DPC_AUX_CH_DATA1 0x64214 +#define DPC_AUX_CH_DATA2 0x64218 +#define DPC_AUX_CH_DATA3 0x6421c +#define DPC_AUX_CH_DATA4 0x64220 +#define DPC_AUX_CH_DATA5 0x64224 + +#define DPD_AUX_CH_CTL 0x64310 +#define DPD_AUX_CH_DATA1 0x64314 +#define DPD_AUX_CH_DATA2 0x64318 +#define DPD_AUX_CH_DATA3 0x6431c +#define DPD_AUX_CH_DATA4 0x64320 +#define DPD_AUX_CH_DATA5 0x64324 + +#define DP_AUX_CH_CTL_SEND_BUSY (1 << 31) +#define DP_AUX_CH_CTL_DONE (1 << 30) +#define DP_AUX_CH_CTL_INTERRUPT (1 << 29) +#define DP_AUX_CH_CTL_TIME_OUT_ERROR (1 << 28) +#define DP_AUX_CH_CTL_TIME_OUT_400us (0 << 26) +#define DP_AUX_CH_CTL_TIME_OUT_600us (1 << 26) +#define DP_AUX_CH_CTL_TIME_OUT_800us (2 << 26) +#define DP_AUX_CH_CTL_TIME_OUT_1600us (3 << 26) +#define DP_AUX_CH_CTL_TIME_OUT_MASK (3 << 26) +#define DP_AUX_CH_CTL_RECEIVE_ERROR (1 << 25) +#define DP_AUX_CH_CTL_MESSAGE_SIZE_MASK (0x1f << 20) +#define DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT 20 +#define DP_AUX_CH_CTL_PRECHARGE_2US_MASK (0xf << 16) +#define DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT 16 +#define DP_AUX_CH_CTL_AUX_AKSV_SELECT (1 << 15) +#define DP_AUX_CH_CTL_MANCHESTER_TEST (1 << 14) +#define DP_AUX_CH_CTL_SYNC_TEST (1 << 13) +#define DP_AUX_CH_CTL_DEGLITCH_TEST (1 << 12) +#define DP_AUX_CH_CTL_PRECHARGE_TEST (1 << 11) +#define DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK (0x7ff) +#define DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT 0 + +/* + * Computing GMCH M and N values for the Display Port link + * + * GMCH M/N = dot clock * bytes per pixel / ls_clk * # of lanes + * + * ls_clk (we assume) is the DP link clock (1.62 or 2.7 GHz) + * + * The GMCH value is used internally + * + * bytes_per_pixel is the number of bytes coming out of the plane, + * which is after the LUTs, so we want the bytes for our color format. + * For our current usage, this is always 3, one byte for R, G and B. + */ +#define PIPEA_GMCH_DATA_M 0x70050 +#define PIPEB_GMCH_DATA_M 0x71050 + +/* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */ +#define PIPE_GMCH_DATA_M_TU_SIZE_MASK (0x3f << 25) +#define PIPE_GMCH_DATA_M_TU_SIZE_SHIFT 25 + +#define PIPE_GMCH_DATA_M_MASK (0xffffff) + +#define PIPEA_GMCH_DATA_N 0x70054 +#define PIPEB_GMCH_DATA_N 0x71054 +#define PIPE_GMCH_DATA_N_MASK (0xffffff) + +/* + * Computing Link M and N values for the Display Port link + * + * Link M / N = pixel_clock / ls_clk + * + * (the DP spec calls pixel_clock the 'strm_clk') + * + * The Link value is transmitted in the Main Stream + * Attributes and VB-ID. + */ + +#define PIPEA_DP_LINK_M 0x70060 +#define PIPEB_DP_LINK_M 0x71060 +#define PIPEA_DP_LINK_M_MASK (0xffffff) + +#define PIPEA_DP_LINK_N 0x70064 +#define PIPEB_DP_LINK_N 0x71064 +#define PIPEA_DP_LINK_N_MASK (0xffffff) + /* Display & cursor control */ /* Pipe A */ -- cgit v1.2.3 From 59a036cfbd29aadf40d2b754cfebee2a96268752 Mon Sep 17 00:00:00 2001 From: yakui_zhao Date: Sun, 31 May 2009 17:16:22 +0800 Subject: drm/i915: Add the structure of child_device_config in video BIOS tables. Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_bios.h | 101 +++++++++++++++++++++++++++++++++++--- 1 file changed, 93 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index 8ca2cde15804..fe72e1c225d8 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -135,6 +135,86 @@ struct bdb_general_features { u8 rsvd11:6; /* finish byte */ } __attribute__((packed)); +/* pre-915 */ +#define GPIO_PIN_DVI_LVDS 0x03 /* "DVI/LVDS DDC GPIO pins" */ +#define GPIO_PIN_ADD_I2C 0x05 /* "ADDCARD I2C GPIO pins" */ +#define GPIO_PIN_ADD_DDC 0x04 /* "ADDCARD DDC GPIO pins" */ +#define GPIO_PIN_ADD_DDC_I2C 0x06 /* "ADDCARD DDC/I2C GPIO pins" */ + +/* Pre 915 */ +#define DEVICE_TYPE_NONE 0x00 +#define DEVICE_TYPE_CRT 0x01 +#define DEVICE_TYPE_TV 0x09 +#define DEVICE_TYPE_EFP 0x12 +#define DEVICE_TYPE_LFP 0x22 +/* On 915+ */ +#define DEVICE_TYPE_CRT_DPMS 0x6001 +#define DEVICE_TYPE_CRT_DPMS_HOTPLUG 0x4001 +#define DEVICE_TYPE_TV_COMPOSITE 0x0209 +#define DEVICE_TYPE_TV_MACROVISION 0x0289 +#define DEVICE_TYPE_TV_RF_COMPOSITE 0x020c +#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE 0x0609 +#define DEVICE_TYPE_TV_SCART 0x0209 +#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009 +#define DEVICE_TYPE_EFP_HOTPLUG_PWR 0x6012 +#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR 0x6052 +#define DEVICE_TYPE_EFP_DVI_I 0x6053 +#define DEVICE_TYPE_EFP_DVI_D_DUAL 0x6152 +#define DEVICE_TYPE_EFP_DVI_D_HDCP 0x60d2 +#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR 0x6062 +#define DEVICE_TYPE_OPENLDI_DUALPIX 0x6162 +#define DEVICE_TYPE_LFP_PANELLINK 0x5012 +#define DEVICE_TYPE_LFP_CMOS_PWR 0x5042 +#define DEVICE_TYPE_LFP_LVDS_PWR 0x5062 +#define DEVICE_TYPE_LFP_LVDS_DUAL 0x5162 +#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP 0x51e2 + +#define DEVICE_CFG_NONE 0x00 +#define DEVICE_CFG_12BIT_DVOB 0x01 +#define DEVICE_CFG_12BIT_DVOC 0x02 +#define DEVICE_CFG_24BIT_DVOBC 0x09 +#define DEVICE_CFG_24BIT_DVOCB 0x0a +#define DEVICE_CFG_DUAL_DVOB 0x11 +#define DEVICE_CFG_DUAL_DVOC 0x12 +#define DEVICE_CFG_DUAL_DVOBC 0x13 +#define DEVICE_CFG_DUAL_LINK_DVOBC 0x19 +#define DEVICE_CFG_DUAL_LINK_DVOCB 0x1a + +#define DEVICE_WIRE_NONE 0x00 +#define DEVICE_WIRE_DVOB 0x01 +#define DEVICE_WIRE_DVOC 0x02 +#define DEVICE_WIRE_DVOBC 0x03 +#define DEVICE_WIRE_DVOBB 0x05 +#define DEVICE_WIRE_DVOCC 0x06 +#define DEVICE_WIRE_DVOB_MASTER 0x0d +#define DEVICE_WIRE_DVOC_MASTER 0x0e + +#define DEVICE_PORT_DVOA 0x00 /* none on 845+ */ +#define DEVICE_PORT_DVOB 0x01 +#define DEVICE_PORT_DVOC 0x02 + +struct child_device_config { + u16 handle; + u16 device_type; + u8 device_id[10]; /* See DEVICE_TYPE_* above */ + u16 addin_offset; + u8 dvo_port; /* See Device_PORT_* above */ + u8 i2c_pin; + u8 slave_addr; + u8 ddc_pin; + u16 edid_ptr; + u8 dvo_cfg; /* See DEVICE_CFG_* above */ + u8 dvo2_port; + u8 i2c2_pin; + u8 slave2_addr; + u8 ddc2_pin; + u8 capabilities; + u8 dvo_wiring;/* See DEVICE_WIRE_* above */ + u8 dvo2_wiring; + u16 extended_type; + u8 dvo_function; +} __attribute__((packed)); + struct bdb_general_definitions { /* DDC GPIO */ u8 crt_ddc_gmbus_pin; @@ -149,14 +229,19 @@ struct bdb_general_definitions { u8 boot_display[2]; u8 child_dev_size; - /* device info */ - u8 tv_or_lvds_info[33]; - u8 dev1[33]; - u8 dev2[33]; - u8 dev3[33]; - u8 dev4[33]; - /* may be another device block here on some platforms */ -}; + /* + * Device info: + * If TV is present, it'll be at devices[0]. + * LVDS will be next, either devices[0] or [1], if present. + * On some platforms the number of device is 6. But could be as few as + * 4 if both TV and LVDS are missing. + * And the device num is related with the size of general definition + * block. It is obtained by using the following formula: + * number = (block_size - sizeof(bdb_general_definitions))/ + * sizeof(child_device_config); + */ + struct child_device_config devices[0]; +} __attribute__((packed)); struct bdb_lvds_options { u8 panel_type; -- cgit v1.2.3 From 9b9d172d06b0f2d51cc9431e2c6c3055f0cf10ef Mon Sep 17 00:00:00 2001 From: yakui_zhao Date: Sun, 31 May 2009 17:17:17 +0800 Subject: drm/i915: parse VBT general definition block to get the SDVO device info The general definition block contains the child device tables, which include the SDVO device info. For example: device slave address, device dvo port, device type. We will get the info of SDVO device by parsing the general definition blocks. Only when a valid slave address is found, it is regarded as the SDVO device. And the info of DVO port and slave address is recorded. http://bugs.freedesktop.org/show_bug.cgi?id=20429 Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 8 ++++ drivers/gpu/drm/i915/intel_bios.c | 86 ++++++++++++++++++++++++++++++++++++++- 2 files changed, 93 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index ded9e786883e..db81f5513daa 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -126,6 +126,13 @@ struct drm_i915_fence_reg { struct drm_gem_object *obj; }; +struct sdvo_device_mapping { + u8 dvo_port; + u8 slave_addr; + u8 dvo_wiring; + u8 initialized; +}; + typedef struct drm_i915_private { struct drm_device *dev; @@ -389,6 +396,7 @@ typedef struct drm_i915_private { /* storage for physical objects */ struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT]; } mm; + struct sdvo_device_mapping sdvo_mappings[2]; } drm_i915_private_t; /** driver private structure attached to each drm_gem_object */ diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 9d78cff33b24..754dd22fdd77 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -30,6 +30,8 @@ #include "i915_drv.h" #include "intel_bios.h" +#define SLAVE_ADDR1 0x70 +#define SLAVE_ADDR2 0x72 static void * find_section(struct bdb_header *bdb, int section_id) @@ -193,6 +195,88 @@ parse_general_features(struct drm_i915_private *dev_priv, } } +static void +parse_sdvo_device_mapping(struct drm_i915_private *dev_priv, + struct bdb_header *bdb) +{ + struct sdvo_device_mapping *p_mapping; + struct bdb_general_definitions *p_defs; + struct child_device_config *p_child; + int i, child_device_num, count; + u16 block_size, *block_ptr; + + p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS); + if (!p_defs) { + DRM_DEBUG("No general definition block is found\n"); + return; + } + /* judge whether the size of child device meets the requirements. + * If the child device size obtained from general definition block + * is different with sizeof(struct child_device_config), skip the + * parsing of sdvo device info + */ + if (p_defs->child_dev_size != sizeof(*p_child)) { + /* different child dev size . Ignore it */ + DRM_DEBUG("different child size is found. Invalid.\n"); + return; + } + /* get the block size of general definitions */ + block_ptr = (u16 *)((char *)p_defs - 2); + block_size = *block_ptr; + /* get the number of child device */ + child_device_num = (block_size - sizeof(*p_defs)) / + sizeof(*p_child); + count = 0; + for (i = 0; i < child_device_num; i++) { + p_child = &(p_defs->devices[i]); + if (!p_child->device_type) { + /* skip the device block if device type is invalid */ + continue; + } + if (p_child->slave_addr != SLAVE_ADDR1 && + p_child->slave_addr != SLAVE_ADDR2) { + /* + * If the slave address is neither 0x70 nor 0x72, + * it is not a SDVO device. Skip it. + */ + continue; + } + if (p_child->dvo_port != DEVICE_PORT_DVOB && + p_child->dvo_port != DEVICE_PORT_DVOC) { + /* skip the incorrect SDVO port */ + DRM_DEBUG("Incorrect SDVO port. Skip it \n"); + continue; + } + DRM_DEBUG("the SDVO device with slave addr %2x is found on " + "%s port\n", + p_child->slave_addr, + (p_child->dvo_port == DEVICE_PORT_DVOB) ? + "SDVOB" : "SDVOC"); + p_mapping = &(dev_priv->sdvo_mappings[p_child->dvo_port - 1]); + if (!p_mapping->initialized) { + p_mapping->dvo_port = p_child->dvo_port; + p_mapping->slave_addr = p_child->slave_addr; + p_mapping->dvo_wiring = p_child->dvo_wiring; + p_mapping->initialized = 1; + } else { + DRM_DEBUG("Maybe one SDVO port is shared by " + "two SDVO device.\n"); + } + if (p_child->slave2_addr) { + /* Maybe this is a SDVO device with multiple inputs */ + /* And the mapping info is not added */ + DRM_DEBUG("there exists the slave2_addr. Maybe this " + "is a SDVO device with multiple inputs.\n"); + } + count++; + } + + if (!count) { + /* No SDVO device info is found */ + DRM_DEBUG("No SDVO device info is found in VBT\n"); + } + return; +} /** * intel_init_bios - initialize VBIOS settings & find VBT * @dev: DRM device @@ -242,7 +326,7 @@ intel_init_bios(struct drm_device *dev) parse_general_features(dev_priv, bdb); parse_lfp_panel_data(dev_priv, bdb); parse_sdvo_panel_data(dev_priv, bdb); - + parse_sdvo_device_mapping(dev_priv, bdb); pci_unmap_rom(pdev, bios); return 0; -- cgit v1.2.3 From 714605e4a05787c51a5ac36c926d2169cfdfbfba Mon Sep 17 00:00:00 2001 From: yakui_zhao Date: Sun, 31 May 2009 17:18:07 +0800 Subject: drm/i915: Initialize the SDVO device based on the sdvo info parsed from VBT http://bugs.freedesktop.org/show_bug.cgi?id=20429 Signed-off-by: Zhao Yakui [anholt: Massive cleanup of the slave addr function] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 43 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 40 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f3ef6bfd8ffc..d8fb88d335cd 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1741,6 +1741,43 @@ static struct i2c_algorithm intel_sdvo_i2c_bit_algo = { .master_xfer = intel_sdvo_master_xfer, }; +static u8 +intel_sdvo_get_slave_addr(struct drm_device *dev, int output_device) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct sdvo_device_mapping *my_mapping, *other_mapping; + + if (output_device == SDVOB) { + my_mapping = &dev_priv->sdvo_mappings[0]; + other_mapping = &dev_priv->sdvo_mappings[1]; + } else { + my_mapping = &dev_priv->sdvo_mappings[1]; + other_mapping = &dev_priv->sdvo_mappings[0]; + } + + /* If the BIOS described our SDVO device, take advantage of it. */ + if (my_mapping->slave_addr) + return my_mapping->slave_addr; + + /* If the BIOS only described a different SDVO device, use the + * address that it isn't using. + */ + if (other_mapping->slave_addr) { + if (other_mapping->slave_addr == 0x70) + return 0x72; + else + return 0x70; + } + + /* No SDVO device info is found for another DVO port, + * so use mapping assumption we had before BIOS parsing. + */ + if (output_device == SDVOB) + return 0x70; + else + return 0x72; +} + bool intel_sdvo_init(struct drm_device *dev, int output_device) { struct drm_connector *connector; @@ -1752,6 +1789,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) u8 ch[0x40]; int i; int encoder_type, output_id; + u8 slave_addr; intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL); if (!intel_output) { @@ -1770,16 +1808,15 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) if (!i2cbus) goto err_inteloutput; + slave_addr = intel_sdvo_get_slave_addr(dev, output_device); sdvo_priv->i2c_bus = i2cbus; if (output_device == SDVOB) { output_id = 1; - sdvo_priv->i2c_bus->slave_addr = 0x38; } else { output_id = 2; - sdvo_priv->i2c_bus->slave_addr = 0x39; } - + sdvo_priv->i2c_bus->slave_addr = slave_addr >> 1; sdvo_priv->output_device = output_device; intel_output->i2c_bus = i2cbus; intel_output->dev_priv = sdvo_priv; -- cgit v1.2.3 From 70aa96ca2d8d938fc036ef8fd189b0151f4fc3ba Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 27 May 2009 17:20:39 -0400 Subject: drm/i915: add ignore lvds quirk info for AOpen Mini PC Fix a FIXME in the intel LVDS bring-up code, adding the appropriate blacklist entry for the AOpen Mini PC, courtesy of a dmidecode dump from Florian Demmer. Signed-off-by: Jarod Wilson CC: Florian Demmer Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index eea3a548b82a..e4ca6a3cdbbc 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -485,8 +485,14 @@ static const struct dmi_system_id __initdata intel_no_lvds[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"), }, }, - - /* FIXME: add a check for the Aopen Mini PC */ + { + .callback = intel_no_lvds_dmi_callback, + .ident = "AOpen Mini PC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "AOpen"), + DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"), + }, + }, { } /* terminating entry */ }; -- cgit v1.2.3 From 42c2798b35b95c471877133e19ccc3cab00e9b65 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 5 May 2009 13:13:16 -0700 Subject: drm/i915: apply G45 vblank count code to all G4x chips and fix max_frame_count All G4x and newer chips use the new style frame count register, with a full 32 bit frame count. Update the code to reflect this. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 5 ++++- drivers/gpu/drm/i915/i915_irq.c | 2 -- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 5d36059d6f4e..68e882cd9651 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1161,8 +1161,11 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) #endif dev->driver->get_vblank_counter = i915_get_vblank_counter; - if (IS_GM45(dev)) + dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ + if (IS_G4X(dev)) { + dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ dev->driver->get_vblank_counter = gm45_get_vblank_counter; + } i915_gem_load(dev); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 4b0bcbd58b8f..701d6809deb7 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -574,8 +574,6 @@ int i915_driver_irq_postinstall(struct drm_device *dev) dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; - dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ - /* Unmask the interrupts that we always want on. */ dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX; -- cgit v1.2.3 From b66d18ddb16603d1e1ec39cb2ff3abf3fd212180 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 15 May 2009 14:11:48 -0700 Subject: drm/i915: avoid non-atomic sysrq execution The sysrq functions are executed in hardirq context, so we shouldn't be calling sleeping functions from them, like mutex_locks or memory allocations. Fix up the i915 sysrq handler to avoid this. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_fb.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index e4652dcdd9bb..7a66b91ccf42 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -857,9 +857,15 @@ void intelfb_restore(void) drm_crtc_helper_set_config(&kernelfb_mode); } +static void intelfb_restore_work_fn(struct work_struct *ignored) +{ + intelfb_restore(); +} +static DECLARE_WORK(intelfb_restore_work, intelfb_restore_work_fn); + static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3) { - intelfb_restore(); + schedule_work(&intelfb_restore_work); } static struct sysrq_key_op sysrq_intelfb_restore_op = { -- cgit v1.2.3 From 1b8e69662e1a086878bf930a6042daf7f8a076cc Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 5 Jun 2009 14:37:23 +0000 Subject: pnp: add PNP resource range checking function Add a PNP resource range check function, indicating whether a resource has been assigned to any device. Signed-off-by: Bjorn Helgaas [apw@canonical.com: fixed up exports et al] Signed-off-by: Andy Whitcroft Signed-off-by: Eric Anholt --- drivers/pnp/resource.c | 18 ++++++++++++++++++ include/linux/pnp.h | 2 ++ 2 files changed, 20 insertions(+) diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index f604061d2bb0..ba9765427886 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -638,6 +638,24 @@ int pnp_possible_config(struct pnp_dev *dev, int type, resource_size_t start, } EXPORT_SYMBOL(pnp_possible_config); +int pnp_range_reserved(resource_size_t start, resource_size_t end) +{ + struct pnp_dev *dev; + struct pnp_resource *pnp_res; + resource_size_t *dev_start, *dev_end; + + pnp_for_each_dev(dev) { + list_for_each_entry(pnp_res, &dev->resources, list) { + dev_start = &pnp_res->res.start; + dev_end = &pnp_res->res.end; + if (ranged_conflict(&start, &end, dev_start, dev_end)) + return 1; + } + } + return 0; +} +EXPORT_SYMBOL(pnp_range_reserved); + /* format is: pnp_reserve_irq=irq1[,irq2] .... */ static int __init pnp_setup_reserve_irq(char *str) { diff --git a/include/linux/pnp.h b/include/linux/pnp.h index ca3c88773028..b063c7328ba5 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -446,6 +446,7 @@ int pnp_start_dev(struct pnp_dev *dev); int pnp_stop_dev(struct pnp_dev *dev); int pnp_activate_dev(struct pnp_dev *dev); int pnp_disable_dev(struct pnp_dev *dev); +int pnp_range_reserved(resource_size_t start, resource_size_t end); /* protocol helpers */ int pnp_is_active(struct pnp_dev *dev); @@ -476,6 +477,7 @@ static inline int pnp_start_dev(struct pnp_dev *dev) { return -ENODEV; } static inline int pnp_stop_dev(struct pnp_dev *dev) { return -ENODEV; } static inline int pnp_activate_dev(struct pnp_dev *dev) { return -ENODEV; } static inline int pnp_disable_dev(struct pnp_dev *dev) { return -ENODEV; } +static inline int pnp_range_reserved(resource_size_t start, resource_size_t end) { return 0;} /* protocol helpers */ static inline int pnp_is_active(struct pnp_dev *dev) { return 0; } -- cgit v1.2.3 From d765898970f35acef960581f678b9da9d5c779fa Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 5 Jun 2009 14:41:29 +0000 Subject: drm/i915: enable MCHBAR if needed Using the new PNP resource checking code, this patch allows the i915 driver to allocate MCHBAR space if needed and use the BAR to determine current memory settings. [apw@canonical.com: moved to the new generic PNP resource interface] Signed-off-by: Jesse Barnes Signed-off-by: Andy Whitcroft Signed-off-by: Eric Anholt failure to update-index after git-am --reject to hand-apply Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 2 + drivers/gpu/drm/i915/i915_gem_tiling.c | 145 +++++++++++++++++++++++++++++++++ 2 files changed, 147 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index db81f5513daa..6a471458d61a 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -150,6 +150,8 @@ typedef struct drm_i915_private { drm_local_map_t hws_map; struct drm_gem_object *hws_obj; + struct resource mch_res; + unsigned int cpp; int back_offset; int front_offset; diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 07d976bf4931..9a05cadaa4ad 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -25,6 +25,8 @@ * */ +#include +#include #include "linux/string.h" #include "linux/bitops.h" #include "drmP.h" @@ -81,6 +83,143 @@ * to match what the GPU expects. */ +#define MCHBAR_I915 0x44 +#define MCHBAR_I965 0x48 +#define MCHBAR_SIZE (4*4096) + +#define DEVEN_REG 0x54 +#define DEVEN_MCHBAR_EN (1 << 28) + +/* Allocate space for the MCH regs if needed, return nonzero on error */ +static int +intel_alloc_mchbar_resource(struct drm_device *dev) +{ + struct pci_dev *bridge_dev; + drm_i915_private_t *dev_priv = dev->dev_private; + int reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915; + u32 temp_lo, temp_hi = 0; + u64 mchbar_addr; + int ret = 0; + + bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); + if (!bridge_dev) { + DRM_DEBUG("no bridge dev?!\n"); + ret = -ENODEV; + goto out; + } + + if (IS_I965G(dev)) + pci_read_config_dword(bridge_dev, reg + 4, &temp_hi); + pci_read_config_dword(bridge_dev, reg, &temp_lo); + mchbar_addr = ((u64)temp_hi << 32) | temp_lo; + + /* If ACPI doesn't have it, assume we need to allocate it ourselves */ + if (mchbar_addr && + pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) { + ret = 0; + goto out_put; + } + + /* Get some space for it */ + ret = pci_bus_alloc_resource(bridge_dev->bus, &dev_priv->mch_res, + MCHBAR_SIZE, MCHBAR_SIZE, + PCIBIOS_MIN_MEM, + 0, pcibios_align_resource, + bridge_dev); + if (ret) { + DRM_DEBUG("failed bus alloc: %d\n", ret); + dev_priv->mch_res.start = 0; + goto out_put; + } + + if (IS_I965G(dev)) + pci_write_config_dword(bridge_dev, reg + 4, + upper_32_bits(dev_priv->mch_res.start)); + + pci_write_config_dword(bridge_dev, reg, + lower_32_bits(dev_priv->mch_res.start)); +out_put: + pci_dev_put(bridge_dev); +out: + return ret; +} + +/* Setup MCHBAR if possible, return true if we should disable it again */ +static bool +intel_setup_mchbar(struct drm_device *dev) +{ + struct pci_dev *bridge_dev; + int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915; + u32 temp; + bool need_disable = false, enabled; + + bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); + if (!bridge_dev) { + DRM_DEBUG("no bridge dev?!\n"); + goto out; + } + + if (IS_I915G(dev) || IS_I915GM(dev)) { + pci_read_config_dword(bridge_dev, DEVEN_REG, &temp); + enabled = !!(temp & DEVEN_MCHBAR_EN); + } else { + pci_read_config_dword(bridge_dev, mchbar_reg, &temp); + enabled = temp & 1; + } + + /* If it's already enabled, don't have to do anything */ + if (enabled) + goto out_put; + + if (intel_alloc_mchbar_resource(dev)) + goto out_put; + + need_disable = true; + + /* Space is allocated or reserved, so enable it. */ + if (IS_I915G(dev) || IS_I915GM(dev)) { + pci_write_config_dword(bridge_dev, DEVEN_REG, + temp | DEVEN_MCHBAR_EN); + } else { + pci_read_config_dword(bridge_dev, mchbar_reg, &temp); + pci_write_config_dword(bridge_dev, mchbar_reg, temp | 1); + } +out_put: + pci_dev_put(bridge_dev); +out: + return need_disable; +} + +static void +intel_teardown_mchbar(struct drm_device *dev, bool disable) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct pci_dev *bridge_dev; + int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915; + u32 temp; + + bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); + if (!bridge_dev) { + DRM_DEBUG("no bridge dev?!\n"); + return; + } + + if (disable) { + if (IS_I915G(dev) || IS_I915GM(dev)) { + pci_read_config_dword(bridge_dev, DEVEN_REG, &temp); + temp &= ~DEVEN_MCHBAR_EN; + pci_write_config_dword(bridge_dev, DEVEN_REG, temp); + } else { + pci_read_config_dword(bridge_dev, mchbar_reg, &temp); + temp &= ~1; + pci_write_config_dword(bridge_dev, mchbar_reg, temp); + } + } + + if (dev_priv->mch_res.start) + release_resource(&dev_priv->mch_res); +} + /** * Detects bit 6 swizzling of address lookup between IGD access and CPU * access through main memory. @@ -91,6 +230,7 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) drm_i915_private_t *dev_priv = dev->dev_private; uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN; uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN; + bool need_disable; if (!IS_I9XX(dev)) { /* As far as we know, the 865 doesn't have these bit 6 @@ -101,6 +241,9 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) } else if (IS_MOBILE(dev)) { uint32_t dcc; + /* Try to make sure MCHBAR is enabled before poking at it */ + need_disable = intel_setup_mchbar(dev); + /* On mobile 9xx chipsets, channel interleave by the CPU is * determined by DCC. For single-channel, neither the CPU * nor the GPU do swizzling. For dual channel interleaved, @@ -140,6 +283,8 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN; swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN; } + + intel_teardown_mchbar(dev, need_disable); } else { /* The 965, G33, and newer, have a very flexible memory * configuration. It will enable dual-channel mode -- cgit v1.2.3 From 036a4a7d9272582fc7370359515d807393e2f728 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 8 Jun 2009 14:40:19 +0800 Subject: drm/i915: handle interrupt on new chipset Update interrupt handling methods for IGDNG with new registers for display and graphics interrupt functions. As we won't use irq-based vblank sync in dri2, so display interrupt on new chip will be used for hotplug only in future. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 2 +- drivers/gpu/drm/i915/i915_drv.h | 5 ++ drivers/gpu/drm/i915/i915_gem.c | 5 +- drivers/gpu/drm/i915/i915_irq.c | 186 ++++++++++++++++++++++++++++++++++++++-- 4 files changed, 190 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 68e882cd9651..6bc716d13a52 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1162,7 +1162,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev->driver->get_vblank_counter = i915_get_vblank_counter; dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ - if (IS_G4X(dev)) { + if (IS_G4X(dev) || IS_IGDNG(dev)) { dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ dev->driver->get_vblank_counter = gm45_get_vblank_counter; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 6a471458d61a..8ef6bcec211b 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -167,6 +167,11 @@ typedef struct drm_i915_private { /** Cached value of IMR to avoid reads in updating the bitfield */ u32 irq_mask_reg; u32 pipestat[2]; + /** splitted irq regs for graphics and display engine on IGDNG, + irq_mask_reg is still used for display irq. */ + u32 gt_irq_mask_reg; + u32 gt_irq_enable_reg; + u32 de_irq_enable_reg; u32 hotplug_supported_mask; struct work_struct hotplug_work; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 3fbd8a0c40d1..38e0f8301a14 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1714,7 +1714,10 @@ i915_wait_request(struct drm_device *dev, uint32_t seqno) BUG_ON(seqno == 0); if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) { - ier = I915_READ(IER); + if (IS_IGDNG(dev)) + ier = I915_READ(DEIER) | I915_READ(GTIER); + else + ier = I915_READ(IER); if (!ier) { DRM_ERROR("something (likely vbetool) disabled " "interrupts, re-enabling\n"); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 701d6809deb7..b86b7b7130c6 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -57,6 +57,47 @@ #define DRM_I915_VBLANK_PIPE_ALL (DRM_I915_VBLANK_PIPE_A | \ DRM_I915_VBLANK_PIPE_B) +void +igdng_enable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask) +{ + if ((dev_priv->gt_irq_mask_reg & mask) != 0) { + dev_priv->gt_irq_mask_reg &= ~mask; + I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg); + (void) I915_READ(GTIMR); + } +} + +static inline void +igdng_disable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask) +{ + if ((dev_priv->gt_irq_mask_reg & mask) != mask) { + dev_priv->gt_irq_mask_reg |= mask; + I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg); + (void) I915_READ(GTIMR); + } +} + +/* For display hotplug interrupt */ +void +igdng_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask) +{ + if ((dev_priv->irq_mask_reg & mask) != 0) { + dev_priv->irq_mask_reg &= ~mask; + I915_WRITE(DEIMR, dev_priv->irq_mask_reg); + (void) I915_READ(DEIMR); + } +} + +static inline void +igdng_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask) +{ + if ((dev_priv->irq_mask_reg & mask) != mask) { + dev_priv->irq_mask_reg |= mask; + I915_WRITE(DEIMR, dev_priv->irq_mask_reg); + (void) I915_READ(DEIMR); + } +} + void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask) { @@ -196,6 +237,47 @@ static void i915_hotplug_work_func(struct work_struct *work) drm_sysfs_hotplug_event(dev); } +irqreturn_t igdng_irq_handler(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + int ret = IRQ_NONE; + u32 de_iir, gt_iir; + u32 new_de_iir, new_gt_iir; + struct drm_i915_master_private *master_priv; + + de_iir = I915_READ(DEIIR); + gt_iir = I915_READ(GTIIR); + + for (;;) { + if (de_iir == 0 && gt_iir == 0) + break; + + ret = IRQ_HANDLED; + + I915_WRITE(DEIIR, de_iir); + new_de_iir = I915_READ(DEIIR); + I915_WRITE(GTIIR, gt_iir); + new_gt_iir = I915_READ(GTIIR); + + if (dev->primary->master) { + master_priv = dev->primary->master->driver_priv; + if (master_priv->sarea_priv) + master_priv->sarea_priv->last_dispatch = + READ_BREADCRUMB(dev_priv); + } + + if (gt_iir & GT_USER_INTERRUPT) { + dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev); + DRM_WAKEUP(&dev_priv->irq_queue); + } + + de_iir = new_de_iir; + gt_iir = new_gt_iir; + } + + return ret; +} + irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; @@ -212,6 +294,9 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) atomic_inc(&dev_priv->irq_received); + if (IS_IGDNG(dev)) + return igdng_irq_handler(dev); + iir = I915_READ(IIR); if (IS_I965G(dev)) { @@ -349,8 +434,12 @@ void i915_user_irq_get(struct drm_device *dev) unsigned long irqflags; spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) - i915_enable_irq(dev_priv, I915_USER_INTERRUPT); + if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) { + if (IS_IGDNG(dev)) + igdng_enable_graphics_irq(dev_priv, GT_USER_INTERRUPT); + else + i915_enable_irq(dev_priv, I915_USER_INTERRUPT); + } spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } @@ -361,8 +450,12 @@ void i915_user_irq_put(struct drm_device *dev) spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0); - if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) - i915_disable_irq(dev_priv, I915_USER_INTERRUPT); + if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) { + if (IS_IGDNG(dev)) + igdng_disable_graphics_irq(dev_priv, GT_USER_INTERRUPT); + else + i915_disable_irq(dev_priv, I915_USER_INTERRUPT); + } spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } @@ -455,6 +548,9 @@ int i915_enable_vblank(struct drm_device *dev, int pipe) if (!(pipeconf & PIPEACONF_ENABLE)) return -EINVAL; + if (IS_IGDNG(dev)) + return 0; + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); if (IS_I965G(dev)) i915_enable_pipestat(dev_priv, pipe, @@ -474,6 +570,9 @@ void i915_disable_vblank(struct drm_device *dev, int pipe) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; + if (IS_IGDNG(dev)) + return; + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); i915_disable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_ENABLE | @@ -547,12 +646,65 @@ int i915_vblank_swap(struct drm_device *dev, void *data, /* drm_dma.h hooks */ +static void igdng_irq_preinstall(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + + I915_WRITE(HWSTAM, 0xeffe); + + /* XXX hotplug from PCH */ + + I915_WRITE(DEIMR, 0xffffffff); + I915_WRITE(DEIER, 0x0); + (void) I915_READ(DEIER); + + /* and GT */ + I915_WRITE(GTIMR, 0xffffffff); + I915_WRITE(GTIER, 0x0); + (void) I915_READ(GTIER); +} + +static int igdng_irq_postinstall(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + /* enable kind of interrupts always enabled */ + u32 display_mask = DE_MASTER_IRQ_CONTROL /*| DE_PCH_EVENT */; + u32 render_mask = GT_USER_INTERRUPT; + + dev_priv->irq_mask_reg = ~display_mask; + dev_priv->de_irq_enable_reg = display_mask; + + /* should always can generate irq */ + I915_WRITE(DEIIR, I915_READ(DEIIR)); + I915_WRITE(DEIMR, dev_priv->irq_mask_reg); + I915_WRITE(DEIER, dev_priv->de_irq_enable_reg); + (void) I915_READ(DEIER); + + /* user interrupt should be enabled, but masked initial */ + dev_priv->gt_irq_mask_reg = 0xffffffff; + dev_priv->gt_irq_enable_reg = render_mask; + + I915_WRITE(GTIIR, I915_READ(GTIIR)); + I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg); + I915_WRITE(GTIER, dev_priv->gt_irq_enable_reg); + (void) I915_READ(GTIER); + + return 0; +} + void i915_driver_irq_preinstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; atomic_set(&dev_priv->irq_received, 0); + INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func); + + if (IS_IGDNG(dev)) { + igdng_irq_preinstall(dev); + return; + } + if (I915_HAS_HOTPLUG(dev)) { I915_WRITE(PORT_HOTPLUG_EN, 0); I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); @@ -564,7 +716,6 @@ void i915_driver_irq_preinstall(struct drm_device * dev) I915_WRITE(IMR, 0xffffffff); I915_WRITE(IER, 0x0); (void) I915_READ(IER); - INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func); } int i915_driver_irq_postinstall(struct drm_device *dev) @@ -572,8 +723,13 @@ int i915_driver_irq_postinstall(struct drm_device *dev) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR; + DRM_INIT_WAITQUEUE(&dev_priv->irq_queue); + dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; + if (IS_IGDNG(dev)) + return igdng_irq_postinstall(dev); + /* Unmask the interrupts that we always want on. */ dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX; @@ -613,11 +769,24 @@ int i915_driver_irq_postinstall(struct drm_device *dev) (void) I915_READ(IER); opregion_enable_asle(dev); - DRM_INIT_WAITQUEUE(&dev_priv->irq_queue); return 0; } +static void igdng_irq_uninstall(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + I915_WRITE(HWSTAM, 0xffffffff); + + I915_WRITE(DEIMR, 0xffffffff); + I915_WRITE(DEIER, 0x0); + I915_WRITE(DEIIR, I915_READ(DEIIR)); + + I915_WRITE(GTIMR, 0xffffffff); + I915_WRITE(GTIER, 0x0); + I915_WRITE(GTIIR, I915_READ(GTIIR)); +} + void i915_driver_irq_uninstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -627,6 +796,11 @@ void i915_driver_irq_uninstall(struct drm_device * dev) dev_priv->vblank_pipe = 0; + if (IS_IGDNG(dev)) { + igdng_irq_uninstall(dev); + return; + } + if (I915_HAS_HOTPLUG(dev)) { I915_WRITE(PORT_HOTPLUG_EN, 0); I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); -- cgit v1.2.3 From 80a538e49daddbf3bf783f3464e91bd3181957b2 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 8 Jun 2009 14:40:20 +0800 Subject: drm/i915: Enable probe on new chipset Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- include/drm/drm_pciids.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index fc55db780199..8b4c80cdd277 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -536,4 +536,6 @@ {0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x0042, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x0046, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0, 0, 0} -- cgit v1.2.3 From fa0864b26b4bfa1dd4bb78eeffbc1f398cb56425 Mon Sep 17 00:00:00 2001 From: Michael Cousin Date: Fri, 5 Jun 2009 21:16:22 +0200 Subject: drm/i915: Skip lvds with Aopen i945GTt-VFA Signed-off-by: Michael Cousin Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index e4ca6a3cdbbc..a7ae9f46aa9a 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -493,6 +493,13 @@ static const struct dmi_system_id __initdata intel_no_lvds[] = { DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"), }, }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Aopen i945GTt-VFA", + .matches = { + DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"), + }, + }, { } /* terminating entry */ }; -- cgit v1.2.3 From 83d60795157c83389e6aaa0532d5e19afa976a24 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 6 Jun 2009 09:45:57 +0100 Subject: drm/i915: Sanity check execbuffer arguments before touching state. By sending a broken execbuffer (its length was not suitably aligned) I triggered an operation upon a freed object. The invalid alignment was discovered after updating the write_domain on the object but before the object was placed on the active queue. So during the unwind process following the error, the now freed object attempts to flush its non-existent, but outstanding, GPU writes causing this use-after-free. [drm:i915_dispatch_gem_execbuffer] *ERROR* alignment [drm:i915_gem_execbuffer] *ERROR* dispatch failed -22 WARNING: at lib/kref.c:43 warn_slowpath_null+0x10/0x15() Modules linked in: Pid: 4552, comm: lt-csi-drm Not tainted 2.6.30-rc6 #423 Call Trace: [] warn_slowpath_fmt+0x57/0x6d [] ? get_pageblock_migratetype+0x18/0x1e [] ? free_hot_page+0xa/0xc [] ? __free_pages+0x16/0x1f [] ? shmem_truncate_range+0x63e/0x656 [] ? slob_page_alloc+0x146/0x1c8 [] warn_slowpath_null+0x10/0x15 [] kref_get+0x1b/0x21 [] i915_gem_object_move_to_active+0x1f/0x56 [] i915_add_request+0x156/0x19a [] i915_gem_object_flush_gpu_write_domain+0x28/0x3f [] i915_gem_object_unbind+0x4a/0x124 [] i915_gem_free_object+0x33/0x9b [] drm_gem_object_free+0x28/0x4a [] ? drm_gem_object_free+0x0/0x4a [] kref_put+0x38/0x41 [] drm_gem_object_unreference+0x11/0x13 [] drm_gem_object_handle_unreference+0x1e/0x21 [] drm_gem_object_release_handle+0xa/0xe [] idr_for_each+0x5f/0x98 [] ? drm_gem_object_release_handle+0x0/0xe [] drm_gem_release+0x22/0x34 [] drm_release+0x1e8/0x3c4 [] __fput+0xaf/0x146 [] fput+0x12/0x14 [] filp_close+0x48/0x52 [] put_files_struct+0x57/0x9b [] exit_files+0x1e/0x20 [] do_exit+0x16d/0x511 [] ? __schedule+0x3d4/0x3e5 [] ? handle_irq+0xd/0x69 [] do_group_exit+0x4d/0x73 [] sys_exit_group+0x13/0x17 [] sysenter_do_call+0x12/0x2b Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 38 +++++++++++++++++++++++++++----------- 1 file changed, 27 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 38e0f8301a14..ac22668b239a 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3050,20 +3050,12 @@ i915_dispatch_gem_execbuffer(struct drm_device *dev, drm_i915_private_t *dev_priv = dev->dev_private; int nbox = exec->num_cliprects; int i = 0, count; - uint32_t exec_start, exec_len; + uint32_t exec_start, exec_len; RING_LOCALS; exec_start = (uint32_t) exec_offset + exec->batch_start_offset; exec_len = (uint32_t) exec->batch_len; - if ((exec_start | exec_len) & 0x7) { - DRM_ERROR("alignment\n"); - return -EINVAL; - } - - if (!exec_start) - return -EINVAL; - count = nbox ? nbox : 1; for (i = 0; i < count; i++) { @@ -3211,6 +3203,24 @@ err: return ret; } +static int +i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer *exec, + uint64_t exec_offset) +{ + uint32_t exec_start, exec_len; + + exec_start = (uint32_t) exec_offset + exec->batch_start_offset; + exec_len = (uint32_t) exec->batch_len; + + if ((exec_start | exec_len) & 0x7) + return -EINVAL; + + if (!exec_start) + return -EINVAL; + + return 0; +} + int i915_gem_execbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -3362,6 +3372,14 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, batch_obj->pending_read_domains = I915_GEM_DOMAIN_COMMAND; batch_obj->pending_write_domain = 0; + /* Sanity check the batch buffer, prior to moving objects */ + exec_offset = exec_list[args->buffer_count - 1].offset; + ret = i915_gem_check_execbuffer (args, exec_offset); + if (ret != 0) { + DRM_ERROR("execbuf with invalid offset/length\n"); + goto err; + } + i915_verify_inactive(dev, __FILE__, __LINE__); /* Zero the global flush/invalidate flags. These @@ -3410,8 +3428,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, } #endif - exec_offset = exec_list[args->buffer_count - 1].offset; - #if WATCH_EXEC i915_gem_dump_object(batch_obj, args->batch_len, -- cgit v1.2.3 From 5f26a2c7ad6eba97141e8372f3def282f934b169 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 6 Jun 2009 09:45:58 +0100 Subject: drm/i915: OR in the COMMAND read domain for the batch buffer. The batch buffer may be shared with another read buffer, so we should not ignore any previously set domains, but just or in the command domain (and check that the buffer is not writable). Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ac22668b239a..2d705e8a297e 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3369,8 +3369,12 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, /* Set the pending read domains for the batch buffer to COMMAND */ batch_obj = object_list[args->buffer_count-1]; - batch_obj->pending_read_domains = I915_GEM_DOMAIN_COMMAND; - batch_obj->pending_write_domain = 0; + if (batch_obj->pending_write_domain) { + DRM_ERROR("Attempting to use self-modifying batch buffer\n"); + ret = -EINVAL; + goto err; + } + batch_obj->pending_read_domains |= I915_GEM_DOMAIN_COMMAND; /* Sanity check the batch buffer, prior to moving objects */ exec_offset = exec_list[args->buffer_count - 1].offset; -- cgit v1.2.3 From 1f803ee5cea67d2387aeedb4b07e645a743729de Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 6 Jun 2009 09:45:59 +0100 Subject: drm/i915: Call drm_vblank_post_modeset() on error paths. Ensure that the drm_vblank_pre_modeset() is always balanced by drm_vblank_post_modeset() within intel_crtc_mode_set(). Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c5c45827ca01..a87eeffc2c8d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1598,6 +1598,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock); if (!ok) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); + drm_vblank_post_modeset(dev, pipe); return -EINVAL; } @@ -1858,12 +1859,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* Flush the plane changes */ ret = intel_pipe_set_base(crtc, x, y, old_fb); - if (ret != 0) - return ret; - drm_vblank_post_modeset(dev, pipe); - return 0; + return ret; } /** Loads the palette/gamma unit for the CRTC with the prepared values */ -- cgit v1.2.3 From b1ce786cb85280490ca3c29a62ddf8608826b414 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 6 Jun 2009 09:46:00 +0100 Subject: drm/i915: no need to hold mutex for object lookup Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 2d705e8a297e..744bf9803ea3 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3701,15 +3701,14 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; - mutex_lock(&dev->struct_mutex); obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) { DRM_ERROR("Bad handle in i915_gem_busy_ioctl(): %d\n", args->handle); - mutex_unlock(&dev->struct_mutex); return -EBADF; } + mutex_lock(&dev->struct_mutex); /* Update the active list for the hardware's current position. * Otherwise this only updates on a delayed timer or when irqs are * actually unmasked, and our working set ends up being larger than -- cgit v1.2.3 From 21d509e339565c82887733c02465bb7f5866c8f5 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 6 Jun 2009 09:46:02 +0100 Subject: drm/i915: use I915_GEM_GPU_DOMAINS Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 744bf9803ea3..cf5dc08b6fa8 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -989,10 +989,10 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, return -ENODEV; /* Only handle setting domains to types used by the CPU. */ - if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + if (write_domain & I915_GEM_GPU_DOMAINS) return -EINVAL; - if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + if (read_domains & I915_GEM_GPU_DOMAINS) return -EINVAL; /* Having something in the write domain implies it's in the read @@ -1769,8 +1769,7 @@ i915_gem_flush(struct drm_device *dev, if (flush_domains & I915_GEM_DOMAIN_CPU) drm_agp_chipset_flush(dev); - if ((invalidate_domains | flush_domains) & ~(I915_GEM_DOMAIN_CPU | - I915_GEM_DOMAIN_GTT)) { + if ((invalidate_domains | flush_domains) & I915_GEM_GPU_DOMAINS) { /* * read/write caches: * @@ -2424,8 +2423,8 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) * wasn't in the GTT, there shouldn't be any way it could have been in * a GPU cache */ - BUG_ON(obj->read_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); - BUG_ON(obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); + BUG_ON(obj->read_domains & I915_GEM_GPU_DOMAINS); + BUG_ON(obj->write_domain & I915_GEM_GPU_DOMAINS); return 0; } @@ -3568,8 +3567,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) atomic_inc(&dev->pin_count); atomic_add(obj->size, &dev->pin_memory); if (!obj_priv->active && - (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | - I915_GEM_DOMAIN_GTT)) == 0 && + (obj->write_domain & I915_GEM_GPU_DOMAINS) == 0 && !list_empty(&obj_priv->list)) list_del_init(&obj_priv->list); } @@ -3596,8 +3594,7 @@ i915_gem_object_unpin(struct drm_gem_object *obj) */ if (obj_priv->pin_count == 0) { if (!obj_priv->active && - (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | - I915_GEM_DOMAIN_GTT)) == 0) + (obj->write_domain & I915_GEM_GPU_DOMAINS) == 0) list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list); atomic_dec(&dev->pin_count); @@ -3847,9 +3844,8 @@ i915_gem_idle(struct drm_device *dev) /* Flush the GPU along with all non-CPU write domains */ - i915_gem_flush(dev, ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT), - ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); - seqno = i915_add_request(dev, NULL, ~I915_GEM_DOMAIN_CPU); + i915_gem_flush(dev, I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS); + seqno = i915_add_request(dev, NULL, I915_GEM_GPU_DOMAINS); if (seqno == 0) { mutex_unlock(&dev->struct_mutex); -- cgit v1.2.3 From 2939e1f5331455d17a4a704dd6210e1474002545 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 6 Jun 2009 09:46:03 +0100 Subject: drm/i915: NOMEM->NOSPC To differentiate between encountering an out-of-memory error with running out of space in the aperture, use ENOSPC for the later. Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index cf5dc08b6fa8..c0ae6bbbd9b5 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2005,7 +2005,7 @@ i915_gem_evict_something(struct drm_device *dev) /* If we didn't do any of the above, there's nothing to be done * and we just can't fit it in. */ - return -ENOMEM; + return -ENOSPC; } return ret; } @@ -2020,7 +2020,7 @@ i915_gem_evict_everything(struct drm_device *dev) if (ret != 0) break; } - if (ret == -ENOMEM) + if (ret == -ENOSPC) return 0; return ret; } @@ -2229,7 +2229,7 @@ try_again: loff_t offset; if (avail == 0) - return -ENOMEM; + return -ENOSPC; for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) { @@ -2378,7 +2378,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) spin_unlock(&dev_priv->mm.active_list_lock); if (lists_empty) { DRM_ERROR("GTT full, but LRU list empty\n"); - return -ENOMEM; + return -ENOSPC; } ret = i915_gem_evict_something(dev); @@ -3349,7 +3349,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, break; /* error other than GTT full, or we've already tried again */ - if (ret != -ENOMEM || pin_tries >= 1) { + if (ret != -ENOSPC || pin_tries >= 1) { if (ret != -ERESTARTSYS) DRM_ERROR("Failed to pin buffers %d\n", ret); goto err; -- cgit v1.2.3 From 03d6069912babc07a3da20e715dd6a5dc8f0f867 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 5 Jun 2009 18:19:56 -0700 Subject: drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect) With the DRM-driven DPMS code, encoders are considered idle unless a connector is hooked to them, so mode setting is skipped. This makes load detection fail as none of the hardware is enabled. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a87eeffc2c8d..b32a51f2a91d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2136,6 +2136,7 @@ struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output, } encoder->crtc = crtc; + intel_output->base.encoder = encoder; intel_output->load_detect_temp = true; intel_crtc = to_intel_crtc(crtc); @@ -2171,6 +2172,7 @@ void intel_release_load_detect_pipe(struct intel_output *intel_output, int dpms_ if (intel_output->load_detect_temp) { encoder->crtc = NULL; + intel_output->base.encoder = NULL; intel_output->load_detect_temp = false; crtc->enabled = drm_helper_crtc_in_use(crtc); drm_helper_disable_unused_functions(dev); -- cgit v1.2.3 From dcae3626d031fe6296b1e96a16f986193a41f840 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 10 Jun 2009 12:43:48 -0700 Subject: drm: fix LOCK_TEST_WITH_RETURN macro When this macro isn't called with 'file_priv' this will result in a build failure. Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie --- include/drm/drmP.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/include/drm/drmP.h b/include/drm/drmP.h index b84d8ae35e6f..efa5f79a35c7 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -237,15 +237,15 @@ struct drm_device; * \param dev DRM device. * \param filp file pointer of the caller. */ -#define LOCK_TEST_WITH_RETURN( dev, file_priv ) \ -do { \ - if (!_DRM_LOCK_IS_HELD(file_priv->master->lock.hw_lock->lock) || \ - file_priv->master->lock.file_priv != file_priv) { \ +#define LOCK_TEST_WITH_RETURN( dev, _file_priv ) \ +do { \ + if (!_DRM_LOCK_IS_HELD(_file_priv->master->lock.hw_lock->lock) || \ + _file_priv->master->lock.file_priv != _file_priv) { \ DRM_ERROR( "%s called without lock held, held %d owner %p %p\n",\ - __func__, _DRM_LOCK_IS_HELD(file_priv->master->lock.hw_lock->lock),\ - file_priv->master->lock.file_priv, file_priv); \ - return -EINVAL; \ - } \ + __func__, _DRM_LOCK_IS_HELD(_file_priv->master->lock.hw_lock->lock),\ + _file_priv->master->lock.file_priv, _file_priv); \ + return -EINVAL; \ + } \ } while (0) /** -- cgit v1.2.3 From 1bcbf3948876e31a8ece28597dec447611ad9c8b Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Wed, 10 Jun 2009 12:43:48 -0700 Subject: intelfb: fix spelling of "CLOCK" Signed-off-by: Pavel Roskin Cc: Eric Anholt Cc: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/intel_fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 7a66b91ccf42..cbd2ba828c72 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -207,7 +207,7 @@ static int intelfb_set_par(struct fb_info *info) if (var->pixclock != -1) { - DRM_ERROR("PIXEL CLCOK SET\n"); + DRM_ERROR("PIXEL CLOCK SET\n"); return -EINVAL; } else { struct drm_crtc *crtc; -- cgit v1.2.3 From b798b1fe3b6436275ad1b517a6823d55e3b75c22 Mon Sep 17 00:00:00 2001 From: Robert P. J. Day Date: Wed, 10 Jun 2009 12:43:49 -0700 Subject: drm: simplify kcalloc() call to kzalloc(). Calls to kcalloc() for a single element can be simplified to calls to kzalloc(). Signed-off-by: Robert P. J. Day Cc: Dave Airlie Cc: Eric Anholt Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 4984aa89cf3d..ec43005100d9 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -133,7 +133,7 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size) BUG_ON((size & (PAGE_SIZE - 1)) != 0); - obj = kcalloc(1, sizeof(*obj), GFP_KERNEL); + obj = kzalloc(sizeof(*obj), GFP_KERNEL); obj->dev = dev; obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE); -- cgit v1.2.3 From 2ff2e8a3e1898e692b604424c384f134009dea80 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 26 May 2009 10:35:52 +1000 Subject: drm: don't associate _DRM_DRIVER maps with a master A driver will use the _DRM_DRIVER map flag to indicate that it wants to be responsible for removing the map itself, bypassing the DRM's automagic cleanup code. Since the multi-master changes this has been broken, resulting in some drivers having their registers unmapped before it's finished with them. Signed-off-by: Ben Skeggs Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_bufs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 0411d912d82a..80a257554b30 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -371,7 +371,8 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset, list->user_token = list->hash.key << PAGE_SHIFT; mutex_unlock(&dev->struct_mutex); - list->master = dev->primary->master; + if (!(map->flags & _DRM_DRIVER)) + list->master = dev->primary->master; *maplist = list; return 0; } -- cgit v1.2.3 From df4f7fe7bd516b3833e25c692c3970e22038a6ca Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 11 Jun 2009 16:16:10 +1000 Subject: radeon: remove _DRM_DRIVER from the preadded sarea map This shouldn't be there and is what broke r600 late in the 2.6.30 release cycle with Ben's patch. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 77a7a4d84650..521ef6a65356 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -2109,7 +2109,7 @@ int radeon_master_create(struct drm_device *dev, struct drm_master *master) /* prebuild the SAREA */ sareapage = max_t(unsigned long, SAREA_MAX, PAGE_SIZE); - ret = drm_addmap(dev, 0, sareapage, _DRM_SHM, _DRM_CONTAINS_LOCK|_DRM_DRIVER, + ret = drm_addmap(dev, 0, sareapage, _DRM_SHM, _DRM_CONTAINS_LOCK, &master_priv->sarea); if (ret) { DRM_ERROR("SAREA setup failed\n"); -- cgit v1.2.3 From 4fefcb27050b98c97b1c32bc710fc2f874449dee Mon Sep 17 00:00:00 2001 From: yakui_zhao Date: Tue, 2 Jun 2009 14:09:47 +0800 Subject: drm: add separate drm debugging levels Now all the DRM debug info will be reported if the boot option of "drm.debug=1" is added. Sometimes it is inconvenient to get the debug info in KMS mode. We will get too much unrelated info. This will separate several DRM debug levels and the debug level can be used to print the different debug info. And the debug level is controlled by the module parameter of drm.debug In this patch it is divided into four debug levels; drm_core, drm_driver, drm_kms, drm_mode. At the same time we can get the different debug info by changing the debug level. This can be done by adding the module parameter. Of course it can be changed through the /sys/module/drm/parameters/debug after the system is booted. Four debug macro definitions are provided. DRM_DEBUG(fmt, args...) DRM_DEBUG_DRIVER(prefix, fmt, args...) DRM_DEBUG_KMS(prefix, fmt, args...) DRM_DEBUG_MODE(prefix, fmt, args...) When the boot option of "drm.debug=4" is added, it will print the debug info using DRM_DEBUG_KMS macro definition. When the boot option of "drm.debug=6" is added, it will print the debug info using DRM_DEBUG_KMS/DRM_DEBUG_DRIVER. Sometimes we expect to print the value of an array. For example: SDVO command, In such case the following four DRM debug macro definitions are added: DRM_LOG(fmt, args...) DRM_LOG_DRIVER(fmt, args...) DRM_LOG_KMS(fmt, args...) DRM_LOG_MODE(fmt, args...) Signed-off-by: Zhao Yakui Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_stub.c | 17 ++++++++++++- include/drm/drmP.h | 61 ++++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 72 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index b9631e3a1ea6..89050684fe0d 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -51,7 +51,22 @@ struct idr drm_minors_idr; struct class *drm_class; struct proc_dir_entry *drm_proc_root; struct dentry *drm_debugfs_root; - +void drm_ut_debug_printk(unsigned int request_level, + const char *prefix, + const char *function_name, + const char *format, ...) +{ + va_list args; + + if (drm_debug & request_level) { + if (function_name) + printk(KERN_DEBUG "[%s:%s], ", prefix, function_name); + va_start(args, format); + vprintk(format, args); + va_end(args); + } +} +EXPORT_SYMBOL(drm_ut_debug_printk); static int drm_minor_get_id(struct drm_device *dev, int type) { int new_id; diff --git a/include/drm/drmP.h b/include/drm/drmP.h index efa5f79a35c7..afc21685230e 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -87,6 +87,15 @@ struct drm_device; #include "drm_os_linux.h" #include "drm_hashtab.h" +#define DRM_UT_CORE 0x01 +#define DRM_UT_DRIVER 0x02 +#define DRM_UT_KMS 0x04 +#define DRM_UT_MODE 0x08 + +extern void drm_ut_debug_printk(unsigned int request_level, + const char *prefix, + const char *function_name, + const char *format, ...); /***********************************************************************/ /** \name DRM template customization defaults */ /*@{*/ @@ -186,15 +195,57 @@ struct drm_device; * \param arg arguments */ #if DRM_DEBUG_CODE -#define DRM_DEBUG(fmt, arg...) \ +#define DRM_DEBUG(fmt, args...) \ do { \ - if ( drm_debug ) \ - printk(KERN_DEBUG \ - "[" DRM_NAME ":%s] " fmt , \ - __func__ , ##arg); \ + drm_ut_debug_printk(DRM_UT_CORE, DRM_NAME, \ + __func__, fmt, ##args); \ + } while (0) + +#define DRM_DEBUG_DRIVER(prefix, fmt, args...) \ + do { \ + drm_ut_debug_printk(DRM_UT_DRIVER, prefix, \ + __func__, fmt, ##args); \ + } while (0) +#define DRM_DEBUG_KMS(prefix, fmt, args...) \ + do { \ + drm_ut_debug_printk(DRM_UT_KMS, prefix, \ + __func__, fmt, ##args); \ + } while (0) +#define DRM_DEBUG_MODE(prefix, fmt, args...) \ + do { \ + drm_ut_debug_printk(DRM_UT_MODE, prefix, \ + __func__, fmt, ##args); \ + } while (0) +#define DRM_LOG(fmt, args...) \ + do { \ + drm_ut_debug_printk(DRM_UT_CORE, NULL, \ + NULL, fmt, ##args); \ + } while (0) +#define DRM_LOG_KMS(fmt, args...) \ + do { \ + drm_ut_debug_printk(DRM_UT_KMS, NULL, \ + NULL, fmt, ##args); \ + } while (0) +#define DRM_LOG_MODE(fmt, args...) \ + do { \ + drm_ut_debug_printk(DRM_UT_MODE, NULL, \ + NULL, fmt, ##args); \ + } while (0) +#define DRM_LOG_DRIVER(fmt, args...) \ + do { \ + drm_ut_debug_printk(DRM_UT_DRIVER, NULL, \ + NULL, fmt, ##args); \ } while (0) #else +#define DRM_DEBUG_DRIVER(prefix, fmt, args...) do { } while (0) +#define DRM_DEBUG_KMS(prefix, fmt, args...) do { } while (0) +#define DRM_DEBUG_MODE(prefix, fmt, args...) do { } while (0) #define DRM_DEBUG(fmt, arg...) do { } while (0) +#define DRM_LOG(fmt, arg...) do { } while (0) +#define DRM_LOG_KMS(fmt, args...) do { } while (0) +#define DRM_LOG_MODE(fmt, arg...) do { } while (0) +#define DRM_LOG_DRIVER(fmt, arg...) do { } while (0) + #endif #define DRM_PROC_LIMIT (PAGE_SIZE-80) -- cgit v1.2.3 From 7fb85bfb54a64e9dd82ee4a79022c38ab58f21a0 Mon Sep 17 00:00:00 2001 From: yakui_zhao Date: Tue, 2 Jun 2009 14:10:49 +0800 Subject: drm/i915: replace DRM_DEBUG with DRM_DEBUG_KMS in intel_lvds Use the DRM_DEBUG_KMS macro definition to print the debug info for the LVDS. Signed-off-by: Zhao Yakui Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/intel_lvds.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index a7ae9f46aa9a..f22e6efbe6a3 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -37,6 +37,8 @@ #include "i915_drm.h" #include "i915_drv.h" +#define I915_LVDS "i915_lvds" + /** * Sets the backlight level. * @@ -447,7 +449,8 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = { static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id) { - DRM_DEBUG("Skipping LVDS initialization for %s\n", id->ident); + DRM_DEBUG_KMS(I915_LVDS, + "Skipping LVDS initialization for %s\n", id->ident); return 1; } @@ -646,7 +649,7 @@ out: return; failed: - DRM_DEBUG("No LVDS modes found, disabling.\n"); + DRM_DEBUG_KMS(I915_LVDS, "No LVDS modes found, disabling.\n"); if (intel_output->ddc_bus) intel_i2c_destroy(intel_output->ddc_bus); drm_connector_cleanup(connector); -- cgit v1.2.3 From 342dc382c451f75ea202a65e6f529bdff6d184cd Mon Sep 17 00:00:00 2001 From: yakui_zhao Date: Tue, 2 Jun 2009 14:12:00 +0800 Subject: drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in intel_sdvo Use the DRM_DEBUG_KMS/DEBUG_LOG_KMS to print the debug info for SDVO device. Signed-off-by: Zhao Yakui Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/intel_sdvo.c | 67 ++++++++++++++++++++------------------- 1 file changed, 35 insertions(+), 32 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index d8fb88d335cd..7cb9ddf1161e 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -36,7 +36,7 @@ #include "intel_sdvo_regs.h" #undef SDVO_DEBUG - +#define I915_SDVO "i915_sdvo" struct intel_sdvo_priv { struct intel_i2c_chan *i2c_bus; int slaveaddr; @@ -277,20 +277,21 @@ static void intel_sdvo_debug_write(struct intel_output *intel_output, u8 cmd, struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; int i; - printk(KERN_DEBUG "%s: W: %02X ", SDVO_NAME(sdvo_priv), cmd); + DRM_DEBUG_KMS(I915_SDVO, "%s: W: %02X ", + SDVO_NAME(sdvo_priv), cmd); for (i = 0; i < args_len; i++) - printk(KERN_DEBUG "%02X ", ((u8 *)args)[i]); + DRM_LOG_KMS("%02X ", ((u8 *)args)[i]); for (; i < 8; i++) - printk(KERN_DEBUG " "); + DRM_LOG_KMS(" "); for (i = 0; i < sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]); i++) { if (cmd == sdvo_cmd_names[i].cmd) { - printk(KERN_DEBUG "(%s)", sdvo_cmd_names[i].name); + DRM_LOG_KMS("(%s)", sdvo_cmd_names[i].name); break; } } if (i == sizeof(sdvo_cmd_names)/ sizeof(sdvo_cmd_names[0])) - printk(KERN_DEBUG "(%02X)", cmd); - printk(KERN_DEBUG "\n"); + DRM_LOG_KMS("(%02X)", cmd); + DRM_LOG_KMS("\n"); } #else #define intel_sdvo_debug_write(o, c, a, l) @@ -329,16 +330,16 @@ static void intel_sdvo_debug_response(struct intel_output *intel_output, struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; int i; - printk(KERN_DEBUG "%s: R: ", SDVO_NAME(sdvo_priv)); + DRM_DEBUG_KMS(I915_SDVO, "%s: R: ", SDVO_NAME(sdvo_priv)); for (i = 0; i < response_len; i++) - printk(KERN_DEBUG "%02X ", ((u8 *)response)[i]); + DRM_LOG_KMS("%02X ", ((u8 *)response)[i]); for (; i < 8; i++) - printk(KERN_DEBUG " "); + DRM_LOG_KMS(" "); if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP) - printk(KERN_DEBUG "(%s)", cmd_status_names[status]); + DRM_LOG_KMS("(%s)", cmd_status_names[status]); else - printk(KERN_DEBUG "(??? %d)", status); - printk(KERN_DEBUG "\n"); + DRM_LOG_KMS("(??? %d)", status); + DRM_LOG_KMS("\n"); } #else #define intel_sdvo_debug_response(o, r, l, s) @@ -1824,8 +1825,9 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) /* Read the regs to test if we can talk to the device */ for (i = 0; i < 0x40; i++) { if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) { - DRM_DEBUG("No SDVO device found on SDVO%c\n", - output_device == SDVOB ? 'B' : 'C'); + DRM_DEBUG_KMS(I915_SDVO, + "No SDVO device found on SDVO%c\n", + output_device == SDVOB ? 'B' : 'C'); goto err_i2c; } } @@ -1909,9 +1911,10 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) sdvo_priv->controlled_output = 0; memcpy (bytes, &sdvo_priv->caps.output_flags, 2); - DRM_DEBUG("%s: Unknown SDVO output type (0x%02x%02x)\n", - SDVO_NAME(sdvo_priv), - bytes[0], bytes[1]); + DRM_DEBUG_KMS(I915_SDVO, + "%s: Unknown SDVO output type (0x%02x%02x)\n", + SDVO_NAME(sdvo_priv), + bytes[0], bytes[1]); encoder_type = DRM_MODE_ENCODER_NONE; connector_type = DRM_MODE_CONNECTOR_Unknown; goto err_i2c; @@ -1941,21 +1944,21 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) &sdvo_priv->pixel_clock_max); - DRM_DEBUG("%s device VID/DID: %02X:%02X.%02X, " - "clock range %dMHz - %dMHz, " - "input 1: %c, input 2: %c, " - "output 1: %c, output 2: %c\n", - SDVO_NAME(sdvo_priv), - sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id, - sdvo_priv->caps.device_rev_id, - sdvo_priv->pixel_clock_min / 1000, - sdvo_priv->pixel_clock_max / 1000, - (sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N', - (sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N', - /* check currently supported outputs */ - sdvo_priv->caps.output_flags & + DRM_DEBUG_KMS(I915_SDVO, "%s device VID/DID: %02X:%02X.%02X, " + "clock range %dMHz - %dMHz, " + "input 1: %c, input 2: %c, " + "output 1: %c, output 2: %c\n", + SDVO_NAME(sdvo_priv), + sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id, + sdvo_priv->caps.device_rev_id, + sdvo_priv->pixel_clock_min / 1000, + sdvo_priv->pixel_clock_max / 1000, + (sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N', + (sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N', + /* check currently supported outputs */ + sdvo_priv->caps.output_flags & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N', - sdvo_priv->caps.output_flags & + sdvo_priv->caps.output_flags & (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); return true; -- cgit v1.2.3 From f053185948a1bd16329433f5371809765086c1ec Mon Sep 17 00:00:00 2001 From: yakui_zhao Date: Tue, 2 Jun 2009 14:12:47 +0800 Subject: drm: Replace DRM_DEBUG with DRM_DEBUG_MODE in drm_mode Replace the DRM_DEBUG with DRM_DEBUG_MODE macro to print the info in drm_mode. airlied:- fixed up to remove a conflicting #define Signed-off-by: Zhao Yakui Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_modes.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index c9b80fdd4630..54f492a488a9 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -38,6 +38,7 @@ #include "drm.h" #include "drm_crtc.h" +#define DRM_MODESET_DEBUG "drm_mode" /** * drm_mode_debug_printmodeline - debug print a mode * @dev: DRM device @@ -50,12 +51,13 @@ */ void drm_mode_debug_printmodeline(struct drm_display_mode *mode) { - DRM_DEBUG("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n", - mode->base.id, mode->name, mode->vrefresh, mode->clock, - mode->hdisplay, mode->hsync_start, - mode->hsync_end, mode->htotal, - mode->vdisplay, mode->vsync_start, - mode->vsync_end, mode->vtotal, mode->type, mode->flags); + DRM_DEBUG_MODE(DRM_MODESET_DEBUG, + "Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n", + mode->base.id, mode->name, mode->vrefresh, mode->clock, + mode->hdisplay, mode->hsync_start, + mode->hsync_end, mode->htotal, + mode->vdisplay, mode->vsync_start, + mode->vsync_end, mode->vtotal, mode->type, mode->flags); } EXPORT_SYMBOL(drm_mode_debug_printmodeline); @@ -401,7 +403,9 @@ void drm_mode_prune_invalid(struct drm_device *dev, list_del(&mode->head); if (verbose) { drm_mode_debug_printmodeline(mode); - DRM_DEBUG("Not using %s mode %d\n", mode->name, mode->status); + DRM_DEBUG_MODE(DRM_MODESET_DEBUG, + "Not using %s mode %d\n", + mode->name, mode->status); } drm_mode_destroy(dev, mode); } -- cgit v1.2.3 From be25ed9c5cc06e1d17aa97e41daf88f0b46143e6 Mon Sep 17 00:00:00 2001 From: yakui_zhao Date: Tue, 2 Jun 2009 14:13:55 +0800 Subject: drm: Replace DRM_DEBUG with DRM_DEBUG_DRIVER in i915 driver Replace the DRM_DEBUG with the DRM_DEBUG_DRIVER to print the debug info in i915 driver. Signed-off-by: Zhao Yakui Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 49 ++++++++++++++++++++++++----------------- 1 file changed, 29 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 6bc716d13a52..054576d5da99 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -33,6 +33,8 @@ #include "i915_drm.h" #include "i915_drv.h" +#define I915_DRV "i915_drv" + /* Really want an OS-independent resettable timer. Would like to have * this loop run for (eg) 3 sec, but have the timer reset every time * the head pointer changes, so that EBUSY only happens if the ring @@ -99,7 +101,7 @@ static int i915_init_phys_hws(struct drm_device *dev) memset(dev_priv->hw_status_page, 0, PAGE_SIZE); I915_WRITE(HWS_PGA, dev_priv->dma_status_page); - DRM_DEBUG("Enabled hardware status page\n"); + DRM_DEBUG_DRIVER(I915_DRV, "Enabled hardware status page\n"); return 0; } @@ -185,7 +187,8 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init) master_priv->sarea_priv = (drm_i915_sarea_t *) ((u8 *)master_priv->sarea->handle + init->sarea_priv_offset); } else { - DRM_DEBUG("sarea not found assuming DRI2 userspace\n"); + DRM_DEBUG_DRIVER(I915_DRV, + "sarea not found assuming DRI2 userspace\n"); } if (init->ring_size != 0) { @@ -235,7 +238,7 @@ static int i915_dma_resume(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - DRM_DEBUG("%s\n", __func__); + DRM_DEBUG_DRIVER(I915_DRV, "%s\n", __func__); if (dev_priv->ring.map.handle == NULL) { DRM_ERROR("can not ioremap virtual address for" @@ -248,13 +251,14 @@ static int i915_dma_resume(struct drm_device * dev) DRM_ERROR("Can not find hardware status page\n"); return -EINVAL; } - DRM_DEBUG("hw status page @ %p\n", dev_priv->hw_status_page); + DRM_DEBUG_DRIVER(I915_DRV, "hw status page @ %p\n", + dev_priv->hw_status_page); if (dev_priv->status_gfx_addr != 0) I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr); else I915_WRITE(HWS_PGA, dev_priv->dma_status_page); - DRM_DEBUG("Enabled hardware status page\n"); + DRM_DEBUG_DRIVER(I915_DRV, "Enabled hardware status page\n"); return 0; } @@ -548,10 +552,10 @@ static int i915_dispatch_flip(struct drm_device * dev) if (!master_priv->sarea_priv) return -EINVAL; - DRM_DEBUG("%s: page=%d pfCurrentPage=%d\n", - __func__, - dev_priv->current_page, - master_priv->sarea_priv->pf_current_page); + DRM_DEBUG_DRIVER(I915_DRV, "%s: page=%d pfCurrentPage=%d\n", + __func__, + dev_priv->current_page, + master_priv->sarea_priv->pf_current_page); i915_kernel_lost_context(dev); @@ -629,8 +633,9 @@ static int i915_batchbuffer(struct drm_device *dev, void *data, return -EINVAL; } - DRM_DEBUG("i915 batchbuffer, start %x used %d cliprects %d\n", - batch->start, batch->used, batch->num_cliprects); + DRM_DEBUG_DRIVER(I915_DRV, + "i915 batchbuffer, start %x used %d cliprects %d\n", + batch->start, batch->used, batch->num_cliprects); RING_LOCK_TEST_WITH_RETURN(dev, file_priv); @@ -678,8 +683,9 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data, void *batch_data; int ret; - DRM_DEBUG("i915 cmdbuffer, buf %p sz %d cliprects %d\n", - cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects); + DRM_DEBUG_DRIVER(I915_DRV, + "i915 cmdbuffer, buf %p sz %d cliprects %d\n", + cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects); RING_LOCK_TEST_WITH_RETURN(dev, file_priv); @@ -734,7 +740,7 @@ static int i915_flip_bufs(struct drm_device *dev, void *data, { int ret; - DRM_DEBUG("%s\n", __func__); + DRM_DEBUG_DRIVER(I915_DRV, "%s\n", __func__); RING_LOCK_TEST_WITH_RETURN(dev, file_priv); @@ -777,7 +783,8 @@ static int i915_getparam(struct drm_device *dev, void *data, value = dev_priv->num_fence_regs - dev_priv->fence_reg_start; break; default: - DRM_DEBUG("Unknown parameter %d\n", param->param); + DRM_DEBUG_DRIVER(I915_DRV, "Unknown parameter %d\n", + param->param); return -EINVAL; } @@ -817,7 +824,8 @@ static int i915_setparam(struct drm_device *dev, void *data, dev_priv->fence_reg_start = param->value; break; default: - DRM_DEBUG("unknown parameter %d\n", param->param); + DRM_DEBUG_DRIVER(I915_DRV, "unknown parameter %d\n", + param->param); return -EINVAL; } @@ -865,9 +873,10 @@ static int i915_set_status_page(struct drm_device *dev, void *data, memset(dev_priv->hw_status_page, 0, PAGE_SIZE); I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr); - DRM_DEBUG("load hws HWS_PGA with gfx mem 0x%x\n", - dev_priv->status_gfx_addr); - DRM_DEBUG("load hws at %p\n", dev_priv->hw_status_page); + DRM_DEBUG_DRIVER(I915_DRV, "load hws HWS_PGA with gfx mem 0x%x\n", + dev_priv->status_gfx_addr); + DRM_DEBUG_DRIVER(I915_DRV, "load hws at %p\n", + dev_priv->hw_status_page); return 0; } @@ -1270,7 +1279,7 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv) { struct drm_i915_file_private *i915_file_priv; - DRM_DEBUG("\n"); + DRM_DEBUG_DRIVER(I915_DRV, "\n"); i915_file_priv = (struct drm_i915_file_private *) drm_alloc(sizeof(*i915_file_priv), DRM_MEM_FILES); -- cgit v1.2.3 From c5c07550d41abe86d109430e718f2007113031f8 Mon Sep 17 00:00:00 2001 From: Figo.zhang Date: Sat, 6 Jun 2009 18:26:26 +0800 Subject: drm/via: vfree() no need checking before calling it vfree() does it's own NULL checking, no need for explicit check before calling it. Signed-off-by: Figo.zhang Signed-off-by: Dave Airlie --- drivers/gpu/drm/via/via_dmablit.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/via/via_dmablit.c b/drivers/gpu/drm/via/via_dmablit.c index 409e00afdd07..327380888b4a 100644 --- a/drivers/gpu/drm/via/via_dmablit.c +++ b/drivers/gpu/drm/via/via_dmablit.c @@ -195,10 +195,8 @@ via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg) default: vsg->state = dr_via_sg_init; } - if (vsg->bounce_buffer) { - vfree(vsg->bounce_buffer); - vsg->bounce_buffer = NULL; - } + vfree(vsg->bounce_buffer); + vsg->bounce_buffer = NULL; vsg->free_on_sequence = 0; } -- cgit v1.2.3 From 7ff145593d808a371924652c8d6a15fb75ce2250 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 22 Apr 2009 18:52:14 +1000 Subject: drm/i915: duplicate desired mode for use by fbcon. duplicate the mode into fbcon storage, so when we free modes later we don't just lose this. Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/intel_display.c | 2 ++ drivers/gpu/drm/i915/intel_fb.c | 16 ++++++++++++---- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b32a51f2a91d..028f5b66e3d8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2310,6 +2310,8 @@ static void intel_crtc_destroy(struct drm_crtc *crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + if (intel_crtc->mode_set.mode) + drm_mode_destroy(crtc->dev, intel_crtc->mode_set.mode); drm_crtc_cleanup(crtc); kfree(intel_crtc); } diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index cbd2ba828c72..0ecf6b76a401 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -674,8 +674,12 @@ static int intelfb_multi_fb_probe_crtc(struct drm_device *dev, struct drm_crtc * par->crtc_ids[0] = crtc->base.id; modeset->num_connectors = conn_count; - if (modeset->mode != modeset->crtc->desired_mode) - modeset->mode = modeset->crtc->desired_mode; + if (modeset->crtc->desired_mode) { + if (modeset->mode) + drm_mode_destroy(dev, modeset->mode); + modeset->mode = drm_mode_duplicate(dev, + modeset->crtc->desired_mode); + } par->crtc_count = 1; @@ -824,8 +828,12 @@ static int intelfb_single_fb_probe(struct drm_device *dev) par->crtc_ids[crtc_count++] = crtc->base.id; modeset->num_connectors = conn_count; - if (modeset->mode != modeset->crtc->desired_mode) - modeset->mode = modeset->crtc->desired_mode; + if (modeset->crtc->desired_mode) { + if (modeset->mode) + drm_mode_destroy(dev, modeset->mode); + modeset->mode = drm_mode_duplicate(dev, + modeset->crtc->desired_mode); + } } par->crtc_count = crtc_count; -- cgit v1.2.3 From 61f11699e7a92d932b31ded3715ad4f70eb26ef2 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 30 May 2009 20:42:27 -0700 Subject: drm: Eliminate magic I2C frobbing when reading EDID This code depends on the underlying I2C adapter using the bit-banging algo, which may not be the case. If specific encoders require this mechanism, they should build a custom I2C algo that implements this workaround, rather than having it in the general path. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 74 +--------------------------------------------- 1 file changed, 1 insertion(+), 73 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index ca9c61656714..c4d9b3308d42 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -584,85 +584,13 @@ int drm_do_probe_ddc_edid(struct i2c_adapter *adapter, } EXPORT_SYMBOL(drm_do_probe_ddc_edid); -/** - * Get EDID information. - * - * \param adapter : i2c device adaptor. - * \param buf : EDID data buffer to be filled - * \param len : EDID data buffer length - * \return 0 on success or -1 on failure. - * - * Initialize DDC, then fetch EDID information - * by calling drm_do_probe_ddc_edid function. - */ -static int drm_ddc_read(struct i2c_adapter *adapter, - unsigned char *buf, int len) -{ - struct i2c_algo_bit_data *algo_data = adapter->algo_data; - int i, j; - int ret = -1; - - algo_data->setscl(algo_data->data, 1); - - for (i = 0; i < 1; i++) { - /* For some old monitors we need the - * following process to initialize/stop DDC - */ - algo_data->setsda(algo_data->data, 1); - msleep(13); - - algo_data->setscl(algo_data->data, 1); - for (j = 0; j < 5; j++) { - msleep(10); - if (algo_data->getscl(algo_data->data)) - break; - } - if (j == 5) - continue; - - algo_data->setsda(algo_data->data, 0); - msleep(15); - algo_data->setscl(algo_data->data, 0); - msleep(15); - algo_data->setsda(algo_data->data, 1); - msleep(15); - - /* Do the real work */ - ret = drm_do_probe_ddc_edid(adapter, buf, len); - algo_data->setsda(algo_data->data, 0); - algo_data->setscl(algo_data->data, 0); - msleep(15); - - algo_data->setscl(algo_data->data, 1); - for (j = 0; j < 10; j++) { - msleep(10); - if (algo_data->getscl(algo_data->data)) - break; - } - - algo_data->setsda(algo_data->data, 1); - msleep(15); - algo_data->setscl(algo_data->data, 0); - algo_data->setsda(algo_data->data, 0); - if (ret == 0) - break; - } - /* Release the DDC lines when done or the Apple Cinema HD display - * will switch off - */ - algo_data->setsda(algo_data->data, 1); - algo_data->setscl(algo_data->data, 1); - - return ret; -} - static int drm_ddc_read_edid(struct drm_connector *connector, struct i2c_adapter *adapter, char *buf, int len) { int ret; - ret = drm_ddc_read(adapter, buf, len); + ret = drm_do_probe_ddc_edid(adapter, buf, len); if (ret != 0) { dev_info(&connector->dev->pdev->dev, "%s: no EDID data\n", drm_get_connector_name(connector)); -- cgit v1.2.3 From fbe0efb869efde8d847ede3a925230ef88910086 Mon Sep 17 00:00:00 2001 From: Kristian Høgsberg Date: Tue, 9 Jun 2009 01:50:41 +1000 Subject: drm_calloc_large: check right size, check integer overflow, use GFP_ZERO Previously we would check size instead of size * nmemb, and so would never hit the vmalloc path. Also add integer overflow check as in kcalloc, and allocate GFP_ZERO pages instead of memset()ing them. Signed-off-by: Kristian Høgsberg Signed-off-by: Dave Airlie --- include/drm/drmP.h | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/include/drm/drmP.h b/include/drm/drmP.h index afc21685230e..1cc51a0812fe 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1573,18 +1573,14 @@ static __inline__ void *drm_calloc(size_t nmemb, size_t size, int area) static __inline__ void *drm_calloc_large(size_t nmemb, size_t size) { - u8 *addr; - - if (size <= PAGE_SIZE) + if (size * nmemb <= PAGE_SIZE) return kcalloc(nmemb, size, GFP_KERNEL); - addr = vmalloc(nmemb * size); - if (!addr) + if (size != 0 && nmemb > ULONG_MAX / size) return NULL; - memset(addr, 0, nmemb * size); - - return addr; + return __vmalloc(size * nmemb, + GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL); } static __inline void drm_free_large(void *ptr) -- cgit v1.2.3 From 2a71ebcd85bcc4d6607f577f23a491f796c30e82 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 12 Jun 2009 15:53:10 +1000 Subject: drm/radeon: add rv740 drm support. This adds drm support for the RV740 family of chips to the r600 support code. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_cp.c | 38 ++++++++++++++++++++++++++++++++++--- drivers/gpu/drm/radeon/radeon_drv.h | 1 + include/drm/drm_pciids.h | 5 +++++ 3 files changed, 41 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c index bc9d09dfa8e7..aa4eee4b7f3a 100644 --- a/drivers/gpu/drm/radeon/r600_cp.c +++ b/drivers/gpu/drm/radeon/r600_cp.c @@ -489,15 +489,16 @@ static void r700_cp_load_microcode(drm_radeon_private_t *dev_priv) RADEON_WRITE(R600_CP_ME_RAM_DATA, RV770_cp_microcode[i]); RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0); - } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV730)) { + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV730) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV740)) { RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0); - DRM_INFO("Loading RV730 PFP Microcode\n"); + DRM_INFO("Loading RV730/RV740 PFP Microcode\n"); for (i = 0; i < R700_PFP_UCODE_SIZE; i++) RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RV730_pfp_microcode[i]); RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0); RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0); - DRM_INFO("Loading RV730 CP Microcode\n"); + DRM_INFO("Loading RV730/RV740 CP Microcode\n"); for (i = 0; i < R700_PM4_UCODE_SIZE; i++) RADEON_WRITE(R600_CP_ME_RAM_DATA, RV730_cp_microcode[i]); RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0); @@ -1324,6 +1325,10 @@ static void r700_gfx_init(struct drm_device *dev, dev_priv->r700_sc_prim_fifo_size = 0xf9; dev_priv->r700_sc_hiz_tile_fifo_size = 0x30; dev_priv->r700_sc_earlyz_tile_fifo_fize = 0x130; + if (dev_priv->r600_sx_max_export_pos_size > 16) { + dev_priv->r600_sx_max_export_pos_size -= 16; + dev_priv->r600_sx_max_export_smx_size += 16; + } break; case CHIP_RV710: dev_priv->r600_max_pipes = 2; @@ -1345,6 +1350,31 @@ static void r700_gfx_init(struct drm_device *dev, dev_priv->r700_sc_hiz_tile_fifo_size = 0x30; dev_priv->r700_sc_earlyz_tile_fifo_fize = 0x130; break; + case CHIP_RV740: + dev_priv->r600_max_pipes = 4; + dev_priv->r600_max_tile_pipes = 4; + dev_priv->r600_max_simds = 8; + dev_priv->r600_max_backends = 4; + dev_priv->r600_max_gprs = 256; + dev_priv->r600_max_threads = 248; + dev_priv->r600_max_stack_entries = 512; + dev_priv->r600_max_hw_contexts = 8; + dev_priv->r600_max_gs_threads = 16 * 2; + dev_priv->r600_sx_max_export_size = 256; + dev_priv->r600_sx_max_export_pos_size = 32; + dev_priv->r600_sx_max_export_smx_size = 224; + dev_priv->r600_sq_num_cf_insts = 2; + + dev_priv->r700_sx_num_of_sets = 7; + dev_priv->r700_sc_prim_fifo_size = 0x100; + dev_priv->r700_sc_hiz_tile_fifo_size = 0x30; + dev_priv->r700_sc_earlyz_tile_fifo_fize = 0x130; + + if (dev_priv->r600_sx_max_export_pos_size > 16) { + dev_priv->r600_sx_max_export_pos_size -= 16; + dev_priv->r600_sx_max_export_smx_size += 16; + } + break; default: break; } @@ -1493,6 +1523,7 @@ static void r700_gfx_init(struct drm_device *dev, break; case CHIP_RV730: case CHIP_RV710: + case CHIP_RV740: default: sq_ms_fifo_sizes |= R600_FETCH_FIFO_HIWATER(0x4); break; @@ -1569,6 +1600,7 @@ static void r700_gfx_init(struct drm_device *dev, switch (dev_priv->flags & RADEON_FAMILY_MASK) { case CHIP_RV770: case CHIP_RV730: + case CHIP_RV740: gs_prim_buffer_depth = 384; break; case CHIP_RV710: diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 8071d965f142..e266e5f8dc26 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -146,6 +146,7 @@ enum radeon_family { CHIP_RV770, CHIP_RV730, CHIP_RV710, + CHIP_RV740, CHIP_LAST, }; diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 8b4c80cdd277..c7a1a8dc5ea4 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -254,6 +254,11 @@ {0x1002, 0x940A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \ {0x1002, 0x940B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \ {0x1002, 0x940F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x94A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x94A1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x94B1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x94B3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x94B5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \ {0x1002, 0x9440, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \ {0x1002, 0x9441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \ {0x1002, 0x9442, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \ -- cgit v1.2.3 From 715cbb05c935e8a4306a730d14a72d5af881523e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 12 Jun 2009 15:55:44 +1000 Subject: drm/radeon: add support for RV790. This adds the PCI IDs for the rv790 which are equiv to the rv770. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_cp.c | 4 ++-- include/drm/drm_pciids.h | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c index aa4eee4b7f3a..146f3570af8e 100644 --- a/drivers/gpu/drm/radeon/r600_cp.c +++ b/drivers/gpu/drm/radeon/r600_cp.c @@ -478,13 +478,13 @@ static void r700_cp_load_microcode(drm_radeon_private_t *dev_priv) if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV770)) { RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0); - DRM_INFO("Loading RV770 PFP Microcode\n"); + DRM_INFO("Loading RV770/RV790 PFP Microcode\n"); for (i = 0; i < R700_PFP_UCODE_SIZE; i++) RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RV770_pfp_microcode[i]); RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0); RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0); - DRM_INFO("Loading RV770 CP Microcode\n"); + DRM_INFO("Loading RV770/RV790 CP Microcode\n"); for (i = 0; i < R700_PM4_UCODE_SIZE; i++) RADEON_WRITE(R600_CP_ME_RAM_DATA, RV770_cp_microcode[i]); RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0); diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index c7a1a8dc5ea4..f8634ab53b8f 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -273,6 +273,8 @@ {0x1002, 0x9456, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \ {0x1002, 0x945A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x945B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x9460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x9462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x946A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x946B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x947A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ -- cgit v1.2.3 From 249d6048ca98b5452105b0824abac1275661b8e3 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 8 Apr 2009 17:11:16 +0200 Subject: drm: Split out the mm declarations in a separate header. Add atomic operations. this is a TTM preparation patch, it rearranges the mm and add operations needed to do mm operations in atomic context. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_mm.c | 165 +++++++++++++++++++++++++++++++++++++++-------- include/drm/drmP.h | 37 +---------- include/drm/drm_mm.h | 90 ++++++++++++++++++++++++++ 3 files changed, 228 insertions(+), 64 deletions(-) create mode 100644 include/drm/drm_mm.h diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index 367c590ffbba..7819fd930a51 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -42,8 +42,11 @@ */ #include "drmP.h" +#include "drm_mm.h" #include +#define MM_UNUSED_TARGET 4 + unsigned long drm_mm_tail_space(struct drm_mm *mm) { struct list_head *tail_node; @@ -74,16 +77,62 @@ int drm_mm_remove_space_from_tail(struct drm_mm *mm, unsigned long size) return 0; } +static struct drm_mm_node *drm_mm_kmalloc(struct drm_mm *mm, int atomic) +{ + struct drm_mm_node *child; + + if (atomic) + child = kmalloc(sizeof(*child), GFP_ATOMIC); + else + child = kmalloc(sizeof(*child), GFP_KERNEL); + + if (unlikely(child == NULL)) { + spin_lock(&mm->unused_lock); + if (list_empty(&mm->unused_nodes)) + child = NULL; + else { + child = + list_entry(mm->unused_nodes.next, + struct drm_mm_node, fl_entry); + list_del(&child->fl_entry); + --mm->num_unused; + } + spin_unlock(&mm->unused_lock); + } + return child; +} + +int drm_mm_pre_get(struct drm_mm *mm) +{ + struct drm_mm_node *node; + + spin_lock(&mm->unused_lock); + while (mm->num_unused < MM_UNUSED_TARGET) { + spin_unlock(&mm->unused_lock); + node = kmalloc(sizeof(*node), GFP_KERNEL); + spin_lock(&mm->unused_lock); + + if (unlikely(node == NULL)) { + int ret = (mm->num_unused < 2) ? -ENOMEM : 0; + spin_unlock(&mm->unused_lock); + return ret; + } + ++mm->num_unused; + list_add_tail(&node->fl_entry, &mm->unused_nodes); + } + spin_unlock(&mm->unused_lock); + return 0; +} +EXPORT_SYMBOL(drm_mm_pre_get); static int drm_mm_create_tail_node(struct drm_mm *mm, - unsigned long start, - unsigned long size) + unsigned long start, + unsigned long size, int atomic) { struct drm_mm_node *child; - child = (struct drm_mm_node *) - drm_alloc(sizeof(*child), DRM_MEM_MM); - if (!child) + child = drm_mm_kmalloc(mm, atomic); + if (unlikely(child == NULL)) return -ENOMEM; child->free = 1; @@ -97,8 +146,7 @@ static int drm_mm_create_tail_node(struct drm_mm *mm, return 0; } - -int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size) +int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size, int atomic) { struct list_head *tail_node; struct drm_mm_node *entry; @@ -106,20 +154,21 @@ int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size) tail_node = mm->ml_entry.prev; entry = list_entry(tail_node, struct drm_mm_node, ml_entry); if (!entry->free) { - return drm_mm_create_tail_node(mm, entry->start + entry->size, size); + return drm_mm_create_tail_node(mm, entry->start + entry->size, + size, atomic); } entry->size += size; return 0; } static struct drm_mm_node *drm_mm_split_at_start(struct drm_mm_node *parent, - unsigned long size) + unsigned long size, + int atomic) { struct drm_mm_node *child; - child = (struct drm_mm_node *) - drm_alloc(sizeof(*child), DRM_MEM_MM); - if (!child) + child = drm_mm_kmalloc(parent->mm, atomic); + if (unlikely(child == NULL)) return NULL; INIT_LIST_HEAD(&child->fl_entry); @@ -151,8 +200,9 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent, tmp = parent->start % alignment; if (tmp) { - align_splitoff = drm_mm_split_at_start(parent, alignment - tmp); - if (!align_splitoff) + align_splitoff = + drm_mm_split_at_start(parent, alignment - tmp, 0); + if (unlikely(align_splitoff == NULL)) return NULL; } @@ -161,7 +211,7 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent, parent->free = 0; return parent; } else { - child = drm_mm_split_at_start(parent, size); + child = drm_mm_split_at_start(parent, size, 0); } if (align_splitoff) @@ -169,14 +219,49 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent, return child; } + EXPORT_SYMBOL(drm_mm_get_block); +struct drm_mm_node *drm_mm_get_block_atomic(struct drm_mm_node *parent, + unsigned long size, + unsigned alignment) +{ + + struct drm_mm_node *align_splitoff = NULL; + struct drm_mm_node *child; + unsigned tmp = 0; + + if (alignment) + tmp = parent->start % alignment; + + if (tmp) { + align_splitoff = + drm_mm_split_at_start(parent, alignment - tmp, 1); + if (unlikely(align_splitoff == NULL)) + return NULL; + } + + if (parent->size == size) { + list_del_init(&parent->fl_entry); + parent->free = 0; + return parent; + } else { + child = drm_mm_split_at_start(parent, size, 1); + } + + if (align_splitoff) + drm_mm_put_block(align_splitoff); + + return child; +} +EXPORT_SYMBOL(drm_mm_get_block_atomic); + /* * Put a block. Merge with the previous and / or next block if they are free. * Otherwise add to the free stack. */ -void drm_mm_put_block(struct drm_mm_node * cur) +void drm_mm_put_block(struct drm_mm_node *cur) { struct drm_mm *mm = cur->mm; @@ -188,21 +273,27 @@ void drm_mm_put_block(struct drm_mm_node * cur) int merged = 0; if (cur_head->prev != root_head) { - prev_node = list_entry(cur_head->prev, struct drm_mm_node, ml_entry); + prev_node = + list_entry(cur_head->prev, struct drm_mm_node, ml_entry); if (prev_node->free) { prev_node->size += cur->size; merged = 1; } } if (cur_head->next != root_head) { - next_node = list_entry(cur_head->next, struct drm_mm_node, ml_entry); + next_node = + list_entry(cur_head->next, struct drm_mm_node, ml_entry); if (next_node->free) { if (merged) { prev_node->size += next_node->size; list_del(&next_node->ml_entry); list_del(&next_node->fl_entry); - drm_free(next_node, sizeof(*next_node), - DRM_MEM_MM); + if (mm->num_unused < MM_UNUSED_TARGET) { + list_add(&next_node->fl_entry, + &mm->unused_nodes); + ++mm->num_unused; + } else + kfree(next_node); } else { next_node->size += cur->size; next_node->start = cur->start; @@ -215,14 +306,19 @@ void drm_mm_put_block(struct drm_mm_node * cur) list_add(&cur->fl_entry, &mm->fl_entry); } else { list_del(&cur->ml_entry); - drm_free(cur, sizeof(*cur), DRM_MEM_MM); + if (mm->num_unused < MM_UNUSED_TARGET) { + list_add(&cur->fl_entry, &mm->unused_nodes); + ++mm->num_unused; + } else + kfree(cur); } } + EXPORT_SYMBOL(drm_mm_put_block); -struct drm_mm_node *drm_mm_search_free(const struct drm_mm * mm, - unsigned long size, - unsigned alignment, int best_match) +struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm, + unsigned long size, + unsigned alignment, int best_match) { struct list_head *list; const struct list_head *free_stack = &mm->fl_entry; @@ -247,7 +343,6 @@ struct drm_mm_node *drm_mm_search_free(const struct drm_mm * mm, wasted += alignment - tmp; } - if (entry->size >= size + wasted) { if (!best_match) return entry; @@ -260,6 +355,7 @@ struct drm_mm_node *drm_mm_search_free(const struct drm_mm * mm, return best; } +EXPORT_SYMBOL(drm_mm_search_free); int drm_mm_clean(struct drm_mm * mm) { @@ -267,14 +363,17 @@ int drm_mm_clean(struct drm_mm * mm) return (head->next->next == head); } -EXPORT_SYMBOL(drm_mm_search_free); +EXPORT_SYMBOL(drm_mm_clean); int drm_mm_init(struct drm_mm * mm, unsigned long start, unsigned long size) { INIT_LIST_HEAD(&mm->ml_entry); INIT_LIST_HEAD(&mm->fl_entry); + INIT_LIST_HEAD(&mm->unused_nodes); + mm->num_unused = 0; + spin_lock_init(&mm->unused_lock); - return drm_mm_create_tail_node(mm, start, size); + return drm_mm_create_tail_node(mm, start, size, 0); } EXPORT_SYMBOL(drm_mm_init); @@ -282,6 +381,7 @@ void drm_mm_takedown(struct drm_mm * mm) { struct list_head *bnode = mm->fl_entry.next; struct drm_mm_node *entry; + struct drm_mm_node *next; entry = list_entry(bnode, struct drm_mm_node, fl_entry); @@ -293,7 +393,16 @@ void drm_mm_takedown(struct drm_mm * mm) list_del(&entry->fl_entry); list_del(&entry->ml_entry); + kfree(entry); + + spin_lock(&mm->unused_lock); + list_for_each_entry_safe(entry, next, &mm->unused_nodes, fl_entry) { + list_del(&entry->fl_entry); + kfree(entry); + --mm->num_unused; + } + spin_unlock(&mm->unused_lock); - drm_free(entry, sizeof(*entry), DRM_MEM_MM); + BUG_ON(mm->num_unused != 0); } EXPORT_SYMBOL(drm_mm_takedown); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 1cc51a0812fe..d4ddc22e46bb 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -86,6 +86,7 @@ struct drm_device; #include "drm_os_linux.h" #include "drm_hashtab.h" +#include "drm_mm.h" #define DRM_UT_CORE 0x01 #define DRM_UT_DRIVER 0x02 @@ -553,26 +554,6 @@ struct drm_sigdata { }; -/* - * Generic memory manager structs - */ - -struct drm_mm_node { - struct list_head fl_entry; - struct list_head ml_entry; - int free; - unsigned long start; - unsigned long size; - struct drm_mm *mm; - void *private; -}; - -struct drm_mm { - struct list_head fl_entry; - struct list_head ml_entry; -}; - - /** * Kernel side of a mapping */ @@ -1436,22 +1417,6 @@ extern char *drm_get_connector_status_name(enum drm_connector_status status); extern int drm_sysfs_connector_add(struct drm_connector *connector); extern void drm_sysfs_connector_remove(struct drm_connector *connector); -/* - * Basic memory manager support (drm_mm.c) - */ -extern struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent, - unsigned long size, - unsigned alignment); -extern void drm_mm_put_block(struct drm_mm_node * cur); -extern struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm, unsigned long size, - unsigned alignment, int best_match); -extern int drm_mm_init(struct drm_mm *mm, unsigned long start, unsigned long size); -extern void drm_mm_takedown(struct drm_mm *mm); -extern int drm_mm_clean(struct drm_mm *mm); -extern unsigned long drm_mm_tail_space(struct drm_mm *mm); -extern int drm_mm_remove_space_from_tail(struct drm_mm *mm, unsigned long size); -extern int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size); - /* Graphics Execution Manager library functions (drm_gem.c) */ int drm_gem_init(struct drm_device *dev); void drm_gem_destroy(struct drm_device *dev); diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h new file mode 100644 index 000000000000..5662f4278ef3 --- /dev/null +++ b/include/drm/drm_mm.h @@ -0,0 +1,90 @@ +/************************************************************************** + * + * Copyright 2006-2008 Tungsten Graphics, Inc., Cedar Park, TX. USA. + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * + **************************************************************************/ +/* + * Authors: + * Thomas Hellstrom + */ + +#ifndef _DRM_MM_H_ +#define _DRM_MM_H_ + +/* + * Generic range manager structs + */ +#include + +struct drm_mm_node { + struct list_head fl_entry; + struct list_head ml_entry; + int free; + unsigned long start; + unsigned long size; + struct drm_mm *mm; + void *private; +}; + +struct drm_mm { + struct list_head fl_entry; + struct list_head ml_entry; + struct list_head unused_nodes; + int num_unused; + spinlock_t unused_lock; +}; + +/* + * Basic range manager support (drm_mm.c) + */ + +extern struct drm_mm_node *drm_mm_get_block(struct drm_mm_node *parent, + unsigned long size, + unsigned alignment); +extern struct drm_mm_node *drm_mm_get_block_atomic(struct drm_mm_node *parent, + unsigned long size, + unsigned alignment); +extern void drm_mm_put_block(struct drm_mm_node *cur); +extern struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm, + unsigned long size, + unsigned alignment, + int best_match); +extern int drm_mm_init(struct drm_mm *mm, unsigned long start, + unsigned long size); +extern void drm_mm_takedown(struct drm_mm *mm); +extern int drm_mm_clean(struct drm_mm *mm); +extern unsigned long drm_mm_tail_space(struct drm_mm *mm); +extern int drm_mm_remove_space_from_tail(struct drm_mm *mm, + unsigned long size); +extern int drm_mm_add_space_to_tail(struct drm_mm *mm, + unsigned long size, int atomic); +extern int drm_mm_pre_get(struct drm_mm *mm); + +static inline struct drm_mm *drm_get_mm(struct drm_mm_node *block) +{ + return block->mm; +} + +#endif -- cgit v1.2.3 From f2cb5d86e1af175a9b210241800f03a447f92621 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 8 Apr 2009 17:16:24 +0200 Subject: drm: Export hash table functionality. add exports so TTM module can use these functions. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_hashtab.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/drm_hashtab.c b/drivers/gpu/drm/drm_hashtab.c index af539f7d87dd..ac35145c3e20 100644 --- a/drivers/gpu/drm/drm_hashtab.c +++ b/drivers/gpu/drm/drm_hashtab.c @@ -62,6 +62,7 @@ int drm_ht_create(struct drm_open_hash *ht, unsigned int order) } return 0; } +EXPORT_SYMBOL(drm_ht_create); void drm_ht_verbose_list(struct drm_open_hash *ht, unsigned long key) { @@ -156,6 +157,7 @@ int drm_ht_just_insert_please(struct drm_open_hash *ht, struct drm_hash_item *it } return 0; } +EXPORT_SYMBOL(drm_ht_just_insert_please); int drm_ht_find_item(struct drm_open_hash *ht, unsigned long key, struct drm_hash_item **item) @@ -169,6 +171,7 @@ int drm_ht_find_item(struct drm_open_hash *ht, unsigned long key, *item = hlist_entry(list, struct drm_hash_item, head); return 0; } +EXPORT_SYMBOL(drm_ht_find_item); int drm_ht_remove_key(struct drm_open_hash *ht, unsigned long key) { @@ -202,3 +205,4 @@ void drm_ht_remove(struct drm_open_hash *ht) ht->table = NULL; } } +EXPORT_SYMBOL(drm_ht_remove); -- cgit v1.2.3 From 3c24475c1e4e8d10e50df161d8c4f1d382997a7c Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 8 Apr 2009 18:34:28 +0200 Subject: drm: include kernel list header file in hashtab header Signed-off-by: Dave Airlie --- include/drm/drm_hashtab.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/drm/drm_hashtab.h b/include/drm/drm_hashtab.h index cd2b189e1be6..0af087a4d3b3 100644 --- a/include/drm/drm_hashtab.h +++ b/include/drm/drm_hashtab.h @@ -35,6 +35,8 @@ #ifndef DRM_HASHTAB_H #define DRM_HASHTAB_H +#include + #define drm_hash_entry(_ptr, _type, _member) container_of(_ptr, _type, _member) struct drm_hash_item { -- cgit v1.2.3