From 71005be40a7fc95edda3cc462361ce0243e4f5fa Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 26 May 2011 21:31:08 +0100 Subject: libertas: Set command sequence number later to ensure consistency Before this patch, the command sequence number is being set before lbs_queue_cmd() adds the command to the queue. However, lbs_queue_cmd() sometimes forces commands to queue-jump (e.g. CMD_802_11_WAKEUP_CONFIRM). It currently does this without considering that sequence numbers might need adjusting to keep things running in order. Fix this by setting the sequence number at a later stage, just before we're actually submitting the command to the hardware. Also fixes a possible race where seqnum was being modified outside of the driver lock. Signed-off-by: Daniel Drake Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cmd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 84566db486d2..71c8f3fccfa1 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -994,6 +994,8 @@ static void lbs_submit_command(struct lbs_private *priv, cmd = cmdnode->cmdbuf; spin_lock_irqsave(&priv->driver_lock, flags); + priv->seqnum++; + cmd->seqnum = cpu_to_le16(priv->seqnum); priv->cur_cmd = cmdnode; spin_unlock_irqrestore(&priv->driver_lock, flags); @@ -1621,11 +1623,9 @@ struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv, /* Copy the incoming command to the buffer */ memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size); - /* Set sequence number, clean result, move to buffer */ - priv->seqnum++; + /* Set command, clean result, move to buffer */ cmdnode->cmdbuf->command = cpu_to_le16(command); cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size); - cmdnode->cmdbuf->seqnum = cpu_to_le16(priv->seqnum); cmdnode->cmdbuf->result = 0; lbs_deb_host("PREP_CMD: command 0x%04x\n", command); -- cgit v1.2.3 From dd08682150e1815fe5cdd0673a2f2e9cd2d55a7a Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 27 May 2011 15:34:45 +0300 Subject: wl12xx: fix passive and radar channel generation for scheduled scan We were comparing bitwise AND results with a boolean, so when the boolean was set to true, it was not matching as it should. Fix this by booleanizing the bitwise AND results with !!. Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index f37e5a391976..f223e0ed0c41 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -338,8 +338,8 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, flags = req->channels[i]->flags; if (!(flags & IEEE80211_CHAN_DISABLED) && - ((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) && - ((flags & IEEE80211_CHAN_RADAR) == radar) && + (!!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) && + (!!(flags & IEEE80211_CHAN_RADAR) == radar) && (req->channels[i]->band == band)) { wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", req->channels[i]->band, -- cgit v1.2.3 From 2497a246e880d1fb537f754f551177c01fa39242 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 27 May 2011 15:34:46 +0300 Subject: wl12xx: fix DFS channels handling in scheduled scan DFS channels were never getting included in the scheduled scans, because they always contain the passive flag as well and the call was asking for DFS and active channels. Fix this by ignoring the passive flag when collecting DFS channels. Also, move the DFS channels in the channel list before the 5GHz active channels (this was implemented in the FW differently than specified). Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/scan.c | 31 ++++++++++++++++++++----------- drivers/net/wireless/wl12xx/scan.h | 3 +++ 2 files changed, 23 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index f223e0ed0c41..8ccbb911776a 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -337,10 +337,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, i++) { flags = req->channels[i]->flags; - if (!(flags & IEEE80211_CHAN_DISABLED) && - (!!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) && + if ((req->channels[i]->band == band) && + !(flags & IEEE80211_CHAN_DISABLED) && (!!(flags & IEEE80211_CHAN_RADAR) == radar) && - (req->channels[i]->band == band)) { + /* if radar is set, we ignore the passive flag */ + (radar || + !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) { wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", req->channels[i]->band, req->channels[i]->center_freq); @@ -350,6 +352,8 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, wl1271_debug(DEBUG_SCAN, "max_power %d", req->channels[i]->max_power); + if (flags & IEEE80211_CHAN_RADAR) + channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS; if (flags & IEEE80211_CHAN_PASSIVE_SCAN) { channels[j].passive_duration = cpu_to_le16(c->dwell_time_passive); @@ -359,7 +363,7 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, channels[j].max_duration = cpu_to_le16(c->max_dwell_time_active); } - channels[j].tx_power_att = req->channels[j]->max_power; + channels[j].tx_power_att = req->channels[i]->max_power; channels[j].channel = req->channels[i]->hw_value; j++; @@ -386,7 +390,11 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl, wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, IEEE80211_BAND_2GHZ, false, false, idx); - idx += cfg->active[0]; + /* + * 5GHz channels always start at position 14, not immediately + * after the last 2.4GHz channel + */ + idx = 14; cfg->passive[1] = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, @@ -394,22 +402,23 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl, false, true, idx); idx += cfg->passive[1]; - cfg->active[1] = + cfg->dfs = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, IEEE80211_BAND_5GHZ, - false, false, 14); - idx += cfg->active[1]; + true, true, idx); + idx += cfg->dfs; - cfg->dfs = + cfg->active[1] = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, IEEE80211_BAND_5GHZ, - true, false, idx); - idx += cfg->dfs; + false, false, idx); + idx += cfg->active[1]; wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d", cfg->active[0], cfg->passive[0]); wl1271_debug(DEBUG_SCAN, " 5GHz: active %d passive %d", cfg->active[1], cfg->passive[1]); + wl1271_debug(DEBUG_SCAN, " DFS: %d", cfg->dfs); return idx; } diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/wl12xx/scan.h index c83319579ca3..a0b6c5d67b07 100644 --- a/drivers/net/wireless/wl12xx/scan.h +++ b/drivers/net/wireless/wl12xx/scan.h @@ -137,6 +137,9 @@ enum { SCAN_BSS_TYPE_ANY, }; +#define SCAN_CHANNEL_FLAGS_DFS BIT(0) +#define SCAN_CHANNEL_FLAGS_DFS_ENABLED BIT(1) + struct conn_scan_ch_params { __le16 min_duration; __le16 max_duration; -- cgit v1.2.3 From 50a66d7f04adbfab9db55144c58dc693358cb635 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 27 May 2011 15:34:47 +0300 Subject: wl12xx: add separate config value for DFS dwell time on sched scan Use a different value for DFS dwell time when performing a scheduled scan. Previously we were using the same value as for normal passive scans. This adds some flexibility between these two different types of passive scan. For now we use 150 TUs for DFS channel dwell time. This may need to be fine-tuned in the future. Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/conf.h | 3 +++ drivers/net/wireless/wl12xx/main.c | 1 + drivers/net/wireless/wl12xx/scan.c | 7 +++++-- 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h index 1ab6c86aac40..c83fefb6662f 100644 --- a/drivers/net/wireless/wl12xx/conf.h +++ b/drivers/net/wireless/wl12xx/conf.h @@ -1157,6 +1157,9 @@ struct conf_sched_scan_settings { /* time to wait on the channel for passive scans (in TUs) */ u32 dwell_time_passive; + /* time to wait on the channel for DFS scans (in TUs) */ + u32 dwell_time_dfs; + /* number of probe requests to send on each channel in active scans */ u8 num_probe_reqs; diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c index bc00e52f6445..e6497dc669df 100644 --- a/drivers/net/wireless/wl12xx/main.c +++ b/drivers/net/wireless/wl12xx/main.c @@ -311,6 +311,7 @@ static struct conf_drv_settings default_conf = { .min_dwell_time_active = 8, .max_dwell_time_active = 30, .dwell_time_passive = 100, + .dwell_time_dfs = 150, .num_probe_reqs = 2, .rssi_threshold = -90, .snr_threshold = 0, diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index 8ccbb911776a..28ec0addc657 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -352,9 +352,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, wl1271_debug(DEBUG_SCAN, "max_power %d", req->channels[i]->max_power); - if (flags & IEEE80211_CHAN_RADAR) + if (flags & IEEE80211_CHAN_RADAR) { channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS; - if (flags & IEEE80211_CHAN_PASSIVE_SCAN) { + channels[j].passive_duration = + cpu_to_le16(c->dwell_time_dfs); + } + else if (flags & IEEE80211_CHAN_PASSIVE_SCAN) { channels[j].passive_duration = cpu_to_le16(c->dwell_time_passive); } else { -- cgit v1.2.3 From 66870b1ccd5c1460e437c18b0026e2dcaab1ece9 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 27 May 2011 15:34:48 +0300 Subject: wl12xx: fix oops in sched_scan when forcing a passive scan Fix kernel oops when trying to use passive scheduled scans. The reason was that in passive scans there are no SSIDs, so there was a NULL pointer dereference. To solve the problem, we now check the number of SSIDs provided in the sched_scan request and only access the list if there's one or more (ie. passive scan is not forced). We also force all the channels to be passive by adding the IEEE80211_CHAN_PASSIVE_SCAN flag locally before the checks in the wl1271_scan_get_sched_scan_channels() function. Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/scan.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index 28ec0addc657..56f76abc754d 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -331,12 +331,16 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, struct conf_sched_scan_settings *c = &wl->conf.sched_scan; int i, j; u32 flags; + bool force_passive = !req->n_ssids; for (i = 0, j = start; i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS; i++) { flags = req->channels[i]->flags; + if (force_passive) + flags |= IEEE80211_CHAN_PASSIVE_SCAN; + if ((req->channels[i]->band == band) && !(flags & IEEE80211_CHAN_DISABLED) && (!!(flags & IEEE80211_CHAN_RADAR) == radar) && @@ -433,6 +437,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, struct wl1271_cmd_sched_scan_config *cfg = NULL; struct conf_sched_scan_settings *c = &wl->conf.sched_scan; int i, total_channels, ret; + bool force_passive = !req->n_ssids; wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); @@ -456,7 +461,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) cfg->intervals[i] = cpu_to_le32(req->interval); - if (req->ssids[0].ssid_len && req->ssids[0].ssid) { + if (!force_passive && req->ssids[0].ssid_len && req->ssids[0].ssid) { cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC; cfg->ssid_len = req->ssids[0].ssid_len; memcpy(cfg->ssid, req->ssids[0].ssid, @@ -473,7 +478,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, goto out; } - if (cfg->active[0]) { + if (!force_passive && cfg->active[0]) { ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid, req->ssids[0].ssid_len, ies->ie[IEEE80211_BAND_2GHZ], @@ -485,7 +490,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, } } - if (cfg->active[1]) { + if (!force_passive && cfg->active[1]) { ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid, req->ssids[0].ssid_len, ies->ie[IEEE80211_BAND_5GHZ], -- cgit v1.2.3 From 59342f6a6bc35df623fb44784daa5e1077063b8f Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Mon, 30 May 2011 10:15:47 +0300 Subject: zd1211rw: fix to work on OHCI zd1211 devices register 'EP 4 OUT' endpoint as Interrupt type on USB 2.0: Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 However on USB 1.1 endpoint becomes Bulk: Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Commit 37939810b937aba830dd751291fcdc51cae1a6cb assumed that endpoint is always interrupt type and changed usb_bulk_msg() calls to usb_interrupt_msg(). Problem here is that usb_bulk_msg() on interrupt endpoint selfcorrects the call and changes requested pipe to interrupt type (see usb_bulk_msg). However with usb_interrupt_msg() on bulk endpoint does not correct the pipe type to bulk, but instead URB is submitted with interrupt type pipe. So pre-2.6.39 used usb_bulk_msg() and therefore worked with both endpoint types, however in 2.6.39 usb_interrupt_msg() with bulk endpoint causes ohci_hcd to fail submitted URB instantly with -ENOSPC and preventing zd1211rw from working with OHCI. Fix this by detecting endpoint type and using correct endpoint/pipe types for URB. Also fix asynchronous zd_usb_iowrite16v_async() to use right URB type on 'EP 4 OUT'. Cc: stable@kernel.org Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 53 +++++++++++++++++++++++++++------- 1 file changed, 42 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 0e819943b9e4..631194d49828 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -1533,6 +1533,31 @@ static void __exit usb_exit(void) module_init(usb_init); module_exit(usb_exit); +static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len, + int *actual_length, int timeout) +{ + /* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in + * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint + * descriptor. + */ + struct usb_host_endpoint *ep; + unsigned int pipe; + + pipe = usb_sndintpipe(udev, EP_REGS_OUT); + ep = usb_pipe_endpoint(udev, pipe); + if (!ep) + return -EINVAL; + + if (usb_endpoint_xfer_int(&ep->desc)) { + return usb_interrupt_msg(udev, pipe, data, len, + actual_length, timeout); + } else { + pipe = usb_sndbulkpipe(udev, EP_REGS_OUT); + return usb_bulk_msg(udev, pipe, data, len, actual_length, + timeout); + } +} + static int usb_int_regs_length(unsigned int count) { return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data); @@ -1648,15 +1673,14 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values, udev = zd_usb_to_usbdev(usb); prepare_read_regs_int(usb); - r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT), - req, req_len, &actual_req_len, 50 /* ms */); + r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/); if (r) { dev_dbg_f(zd_usb_dev(usb), - "error in usb_interrupt_msg(). Error number %d\n", r); + "error in zd_ep_regs_out_msg(). Error number %d\n", r); goto error; } if (req_len != actual_req_len) { - dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()\n" + dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n" " req_len %d != actual_req_len %d\n", req_len, actual_req_len); r = -EIO; @@ -1818,9 +1842,17 @@ int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, rw->value = cpu_to_le16(ioreqs[i].value); } - usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT), - req, req_len, iowrite16v_urb_complete, usb, - ep->desc.bInterval); + /* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode + * endpoint is bulk. Select correct type URB by endpoint descriptor. + */ + if (usb_endpoint_xfer_int(&ep->desc)) + usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT), + req, req_len, iowrite16v_urb_complete, usb, + ep->desc.bInterval); + else + usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT), + req, req_len, iowrite16v_urb_complete, usb); + urb->transfer_flags |= URB_FREE_BUFFER; /* Submit previous URB */ @@ -1924,15 +1956,14 @@ int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits) } udev = zd_usb_to_usbdev(usb); - r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT), - req, req_len, &actual_req_len, 50 /* ms */); + r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/); if (r) { dev_dbg_f(zd_usb_dev(usb), - "error in usb_interrupt_msg(). Error number %d\n", r); + "error in zd_ep_regs_out_msg(). Error number %d\n", r); goto out; } if (req_len != actual_req_len) { - dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()" + dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()" " req_len %d != actual_req_len %d\n", req_len, actual_req_len); r = -EIO; -- cgit v1.2.3 From 1144181c1bc054dc5e001a6f10b4820167e6c883 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Mon, 30 May 2011 09:32:52 -0700 Subject: iwlagn: fix incorrect PCI subsystem id for 6150 devices For 6150 devices, modify the supported PCI subsystem ID. Cc: stable@kernel.org Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 28 ++++++++++++++++++---------- drivers/net/wireless/iwlwifi/iwl-agn.c | 6 +++--- drivers/net/wireless/iwlwifi/iwl-agn.h | 1 + 3 files changed, 22 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index f8c710db6e6f..fda6fe08cf91 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -603,19 +603,27 @@ struct iwl_cfg iwl6050_2abg_cfg = { IWL_DEVICE_6050, }; +#define IWL_DEVICE_6150 \ + .fw_name_pre = IWL6050_FW_PRE, \ + .ucode_api_max = IWL6050_UCODE_API_MAX, \ + .ucode_api_min = IWL6050_UCODE_API_MIN, \ + .ops = &iwl6150_ops, \ + .eeprom_ver = EEPROM_6150_EEPROM_VERSION, \ + .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \ + .base_params = &iwl6050_base_params, \ + .need_dc_calib = true, \ + .led_mode = IWL_LED_BLINK, \ + .internal_wimax_coex = true + struct iwl_cfg iwl6150_bgn_cfg = { .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN", - .fw_name_pre = IWL6050_FW_PRE, - .ucode_api_max = IWL6050_UCODE_API_MAX, - .ucode_api_min = IWL6050_UCODE_API_MIN, - .eeprom_ver = EEPROM_6150_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, - .ops = &iwl6150_ops, - .base_params = &iwl6050_base_params, + IWL_DEVICE_6150, .ht_params = &iwl6000_ht_params, - .need_dc_calib = true, - .led_mode = IWL_LED_RF_STATE, - .internal_wimax_coex = true, +}; + +struct iwl_cfg iwl6150_bg_cfg = { + .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG", + IWL_DEVICE_6150, }; struct iwl_cfg iwl6000_3agn_cfg = { diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 11c6c1169e78..a662adcb2adb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3831,11 +3831,11 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { /* 6150 WiFi/WiMax Series */ {IWL_PCI_DEVICE(0x0885, 0x1305, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0885, 0x1306, iwl6150_bgn_cfg)}, + {IWL_PCI_DEVICE(0x0885, 0x1307, iwl6150_bg_cfg)}, {IWL_PCI_DEVICE(0x0885, 0x1325, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0885, 0x1326, iwl6150_bgn_cfg)}, + {IWL_PCI_DEVICE(0x0885, 0x1327, iwl6150_bg_cfg)}, {IWL_PCI_DEVICE(0x0886, 0x1315, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0886, 0x1316, iwl6150_bgn_cfg)}, + {IWL_PCI_DEVICE(0x0886, 0x1317, iwl6150_bg_cfg)}, /* 1000 Series WiFi */ {IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)}, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h index 2495fe7a58cb..d1716844002e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn.h @@ -89,6 +89,7 @@ extern struct iwl_cfg iwl6000_3agn_cfg; extern struct iwl_cfg iwl6050_2agn_cfg; extern struct iwl_cfg iwl6050_2abg_cfg; extern struct iwl_cfg iwl6150_bgn_cfg; +extern struct iwl_cfg iwl6150_bg_cfg; extern struct iwl_cfg iwl1000_bgn_cfg; extern struct iwl_cfg iwl1000_bg_cfg; extern struct iwl_cfg iwl100_bgn_cfg; -- cgit v1.2.3 From 333ba7325213f0a09dfa5ceeddb056d6ad74b3b5 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Sun, 29 May 2011 15:53:20 +0300 Subject: cfg80211: don't drop p2p probe responses Commit 0a35d36 ("cfg80211: Use capability info to detect mesh beacons") assumed that probe response with both ESS and IBSS bits cleared means that the frame was sent by a mesh sta. However, these capabilities are also being used in the p2p_find phase, and the mesh-validation broke it. Rename the WLAN_CAPABILITY_IS_MBSS macro, and verify that mesh ies exist before assuming this frame was sent by a mesh sta. Signed-off-by: Eliad Peller Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 8 ++++++-- net/wireless/scan.c | 43 ++++++++++++++++++++++++------------------- 2 files changed, 30 insertions(+), 21 deletions(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index b2eee5879883..bf56b6f78270 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1003,8 +1003,12 @@ struct ieee80211_ht_info { #define WLAN_CAPABILITY_ESS (1<<0) #define WLAN_CAPABILITY_IBSS (1<<1) -/* A mesh STA sets the ESS and IBSS capability bits to zero */ -#define WLAN_CAPABILITY_IS_MBSS(cap) \ +/* + * A mesh STA sets the ESS and IBSS capability bits to zero. + * however, this holds true for p2p probe responses (in the p2p_find + * phase) as well. + */ +#define WLAN_CAPABILITY_IS_STA_BSS(cap) \ (!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS))) #define WLAN_CAPABILITY_CF_POLLABLE (1<<2) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 73a441d237b5..7a6c67667d70 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -267,13 +267,35 @@ static bool is_bss(struct cfg80211_bss *a, return memcmp(ssidie + 2, ssid, ssid_len) == 0; } +static bool is_mesh_bss(struct cfg80211_bss *a) +{ + const u8 *ie; + + if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability)) + return false; + + ie = cfg80211_find_ie(WLAN_EID_MESH_ID, + a->information_elements, + a->len_information_elements); + if (!ie) + return false; + + ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, + a->information_elements, + a->len_information_elements); + if (!ie) + return false; + + return true; +} + static bool is_mesh(struct cfg80211_bss *a, const u8 *meshid, size_t meshidlen, const u8 *meshcfg) { const u8 *ie; - if (!WLAN_CAPABILITY_IS_MBSS(a->capability)) + if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability)) return false; ie = cfg80211_find_ie(WLAN_EID_MESH_ID, @@ -311,7 +333,7 @@ static int cmp_bss(struct cfg80211_bss *a, if (a->channel != b->channel) return b->channel->center_freq - a->channel->center_freq; - if (WLAN_CAPABILITY_IS_MBSS(a->capability | b->capability)) { + if (is_mesh_bss(a) && is_mesh_bss(b)) { r = cmp_ies(WLAN_EID_MESH_ID, a->information_elements, a->len_information_elements, @@ -457,7 +479,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *res) { struct cfg80211_internal_bss *found = NULL; - const u8 *meshid, *meshcfg; /* * The reference to "res" is donated to this function. @@ -470,22 +491,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, res->ts = jiffies; - if (WLAN_CAPABILITY_IS_MBSS(res->pub.capability)) { - /* must be mesh, verify */ - meshid = cfg80211_find_ie(WLAN_EID_MESH_ID, - res->pub.information_elements, - res->pub.len_information_elements); - meshcfg = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, - res->pub.information_elements, - res->pub.len_information_elements); - if (!meshid || !meshcfg || - meshcfg[1] != sizeof(struct ieee80211_meshconf_ie)) { - /* bogus mesh */ - kref_put(&res->ref, bss_release); - return NULL; - } - } - spin_lock_bh(&dev->bss_lock); found = rb_find_bss(dev, res); -- cgit v1.2.3 From 21fdc87248d1d28492c775e05fa92b3c8c7bc8db Mon Sep 17 00:00:00 2001 From: Daniel Halperin Date: Tue, 31 May 2011 11:59:30 -0700 Subject: ath9k: fix two more bugs in tx power This is the same fix as commit 841051602e3fa18ea468fe5a177aa92b6eb44b56 Author: Matteo Croce Date: Fri Dec 3 02:25:08 2010 +0100 The ath9k driver subtracts 3 dBm to the txpower as with two radios the signal power is doubled. The resulting value is assigned in an u16 which overflows and makes the card work at full power. in two more places. I grepped the ath tree and didn't find any others. Cc: stable@kernel.org Signed-off-by: Daniel Halperin Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 10 ++++++++-- drivers/net/wireless/ath/ath9k/eeprom_9287.c | 10 ++++++++-- 2 files changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 0ca7635d0669..ff8150e46f0e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -4645,10 +4645,16 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah, case 1: break; case 2: - scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + else + scaledPower = 0; break; case 3: - scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + else + scaledPower = 0; break; } diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c index 7856f0d4512d..343fc9f946db 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c @@ -524,10 +524,16 @@ static void ath9k_hw_set_ar9287_power_per_rate_table(struct ath_hw *ah, case 1: break; case 2: - scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + else + scaledPower = 0; break; case 3: - scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + else + scaledPower = 0; break; } scaledPower = max((u16)0, scaledPower); -- cgit v1.2.3 From a7567b2059020bf3fa96c389ec25eed8e28ad4ba Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Jun 2011 08:29:54 +0200 Subject: bluetooth l2cap: fix locking in l2cap_global_chan_by_psm read_lock() ... read_unlock_bh() is clearly bogus. This was broken by commit 23691d75cdc69c3b285211b4d77746aa20a17d18 Author: Gustavo F. Padovan Date: Wed Apr 27 18:26:32 2011 -0300 Bluetooth: Remove l2cap_sk_list Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/bluetooth/l2cap_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index a86f9ba4f05c..e64a1c2df238 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -906,7 +906,7 @@ static struct l2cap_chan *l2cap_global_chan_by_psm(int state, __le16 psm, bdaddr if (c->psm == psm) { /* Exact match. */ if (!bacmp(&bt_sk(sk)->src, src)) { - read_unlock_bh(&chan_list_lock); + read_unlock(&chan_list_lock); return c; } -- cgit v1.2.3 From dfe21582ac5ebc460dda98c67e8589dd506d02cd Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 1 Jun 2011 17:17:57 +0200 Subject: iwl4965: correctly validate temperature value In some cases we can read wrong temperature value. If after that temperature value will not be updated to good one, we badly configure tx power parameters and device is unable to send a data. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=35932 Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-4965.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c index f5433c74b845..f9db25bb35c3 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965.c @@ -1543,7 +1543,7 @@ static void iwl4965_temperature_calib(struct iwl_priv *priv) s32 temp; temp = iwl4965_hw_get_temperature(priv); - if (temp < 0) + if (IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp)) return; if (priv->temperature != temp) { -- cgit v1.2.3