From d41f950e27f0e155d0118e71403d2bd564d94787 Mon Sep 17 00:00:00 2001 From: Lothar Waßmann Date: Wed, 7 Aug 2013 08:15:37 +0200 Subject: mtd: nand: gpmi-nand: janitorial cleanup: (commas after last element of struct initializer) Acked-by: Huang Shijie Signed-off-by: Lothar Waßmann Signed-off-by: Artem Bityutskiy --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index a9830ff8e3f3..10a092dbaa71 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1691,19 +1691,19 @@ static const struct platform_device_id gpmi_ids[] = { { .name = "imx23-gpmi-nand", .driver_data = IS_MX23, }, { .name = "imx28-gpmi-nand", .driver_data = IS_MX28, }, { .name = "imx6q-gpmi-nand", .driver_data = IS_MX6Q, }, - {}, + {} }; static const struct of_device_id gpmi_nand_id_table[] = { { .compatible = "fsl,imx23-gpmi-nand", - .data = (void *)&gpmi_ids[IS_MX23] + .data = (void *)&gpmi_ids[IS_MX23], }, { .compatible = "fsl,imx28-gpmi-nand", - .data = (void *)&gpmi_ids[IS_MX28] + .data = (void *)&gpmi_ids[IS_MX28], }, { .compatible = "fsl,imx6q-gpmi-nand", - .data = (void *)&gpmi_ids[IS_MX6Q] + .data = (void *)&gpmi_ids[IS_MX6Q], }, {} }; MODULE_DEVICE_TABLE(of, gpmi_nand_id_table); -- cgit v1.2.3 From a6eaa2ae7820f0cca742917f85f34ef1eed2c95d Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Mon, 2 Sep 2013 23:37:53 -0300 Subject: of_mtd: Add no-op stubs to support CONFIG_OF=n Just like the rest of the subsystems, let's add the required no-op functions to implement stubs when CONFIG_OF=n. This prevents MTD drivers from having ugly ifdefs in their code, and instead hide the ifdef monster in the header closet (far away from people's sight). Signed-off-by: Ezequiel Garcia Signed-off-by: Brian Norris --- include/linux/of_mtd.h | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h index ed7f267e6389..6f10e938ff7e 100644 --- a/include/linux/of_mtd.h +++ b/include/linux/of_mtd.h @@ -10,10 +10,29 @@ #define __LINUX_OF_NET_H #ifdef CONFIG_OF_MTD + #include int of_get_nand_ecc_mode(struct device_node *np); int of_get_nand_bus_width(struct device_node *np); bool of_get_nand_on_flash_bbt(struct device_node *np); -#endif + +#else /* CONFIG_OF_MTD */ + +static inline int of_get_nand_ecc_mode(struct device_node *np) +{ + return -ENOSYS; +} + +static inline int of_get_nand_bus_width(struct device_node *np) +{ + return -ENOSYS; +} + +static inline bool of_get_nand_on_flash_bbt(struct device_node *np) +{ + return false; +} + +#endif /* CONFIG_OF_MTD */ #endif /* __LINUX_OF_MTD_H */ -- cgit v1.2.3 From 2ee41fa0bad874e9fef3743979d297f97b7eda49 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Sat, 10 Aug 2013 01:01:05 -0700 Subject: nand: docg4: use nand_base's default BBT scan There's no point in the low level driver doing the work that nand_base already is doing; just let nand_base set the default BBT scanning function. Signed-off-by: Brian Norris Acked-by: Mike Dunn --- drivers/mtd/nand/docg4.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index 548db2389fab..7c38b8ad4404 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -1239,7 +1239,6 @@ static void __init init_mtd_structs(struct mtd_info *mtd) nand->block_markbad = docg4_block_markbad; nand->read_buf = docg4_read_buf; nand->write_buf = docg4_write_buf16; - nand->scan_bbt = nand_default_bbt; nand->erase_cmd = docg4_erase_block; nand->ecc.read_page = docg4_read_page; nand->ecc.write_page = docg4_write_page; -- cgit v1.2.3 From 252026ab9382b5204b7ccd152863a49ae7408656 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Sat, 10 Aug 2013 01:03:33 -0700 Subject: mtd: nand: lpc32xx_slc: don't call nand_default_bbt directly This driver is doing some strange logic here. If it doesn't have flash-based BBT enabled, it allows nand_scan_tail() to scan the BBT. But if it is using flash-based BBT, it tells nand_scan_tail() to skip scanning, then it immediately calls the default BBT scanning function itself. As I read it, this logic is equivalent to the default nand_scan_tail() behavior without interfering with NAND_SKIP_BBTSCAN or calling nand_default_bbt() directly at all. Signed-off-by: Brian Norris --- drivers/mtd/nand/lpc32xx_slc.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c index add75709d415..6d5f8c515436 100644 --- a/drivers/mtd/nand/lpc32xx_slc.c +++ b/drivers/mtd/nand/lpc32xx_slc.c @@ -893,7 +893,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) /* Avoid extra scan if using BBT, setup BBT support */ if (host->ncfg->use_bbt) { - chip->options |= NAND_SKIP_BBTSCAN; chip->bbt_options |= NAND_BBT_USE_FLASH; /* @@ -915,13 +914,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) goto err_exit3; } - /* Standard layout in FLASH for bad block tables */ - if (host->ncfg->use_bbt) { - if (nand_default_bbt(mtd) < 0) - dev_err(&pdev->dev, - "Error initializing default bad block tables\n"); - } - mtd->name = "nxp_lpc3220_slc"; ppdata.of_node = pdev->dev.of_node; res = mtd_device_parse_register(mtd, NULL, &ppdata, host->ncfg->parts, -- cgit v1.2.3 From 4fd18ae46d207987737d94f8d67483f8d8813b15 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Sat, 24 Aug 2013 00:21:30 -0700 Subject: mtd: nandsim: don't call nand_default_bbt() directly We want the default nand_chip.scan_bbt() function, so just use the proper indirection. Signed-off-by: Brian Norris --- drivers/mtd/nand/nandsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index bdc1d15369f8..fdcc5bd3c06b 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -2372,7 +2372,7 @@ static int __init ns_init_module(void) if ((retval = init_nandsim(nsmtd)) != 0) goto err_exit; - if ((retval = nand_default_bbt(nsmtd)) != 0) + if ((retval = chip->scan_bbt(nsmtd)) != 0) goto err_exit; if ((retval = parse_badblocks(nand, nsmtd)) != 0) -- cgit v1.2.3 From 552fb55d6e0a83a751385cebc214c090626765fc Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Sat, 10 Aug 2013 01:09:49 -0700 Subject: mtd: nand: stop exporting nand_default_bbt I removed the last non-nand_base users of this, and we shouldn't have any more modules that need to access it. It's only non-static to share between nand_base and nand_bbt. Signed-off-by: Brian Norris --- drivers/mtd/nand/nand_bbt.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index bc06196d5739..c75b6a7c6ea4 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -1392,4 +1392,3 @@ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs) } EXPORT_SYMBOL(nand_scan_bbt); -EXPORT_SYMBOL(nand_default_bbt); -- cgit v1.2.3 From be1ee7d88162fa7e2de45b4f952bf566e8ffe97d Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Sat, 10 Aug 2013 10:36:00 -0700 Subject: mtd: dataflash: remove unused field struct dataflash's 'partition' field is unused. Just remove it. Signed-off-by: Brian Norris Cc: David Brownell --- drivers/mtd/devices/mtd_dataflash.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 0e8cbfeba11e..1cfbfcfb6e19 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -88,8 +88,6 @@ struct dataflash { uint8_t command[4]; char name[24]; - unsigned partitioned:1; - unsigned short page_offset; /* offset in flash address */ unsigned int page_size; /* of bytes per page */ -- cgit v1.2.3 From 8c5194361de9f691a20a4f31c4945c8c95f9268b Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Sat, 10 Aug 2013 22:57:30 -0700 Subject: mtd: denali: make init function static It's only used in this file. Signed-off-by: Brian Norris --- drivers/mtd/nand/denali.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 2ed2bb33a6e7..154b033b4e8e 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1394,7 +1394,7 @@ static struct nand_bbt_descr bbt_mirror_descr = { }; /* initialize driver data structures */ -void denali_drv_init(struct denali_nand_info *denali) +static void denali_drv_init(struct denali_nand_info *denali) { denali->idx = 0; -- cgit v1.2.3 From 53d66baef631ec7fa83dd1b161bf4c3ebabeb73e Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Thu, 15 Aug 2013 22:44:57 -0700 Subject: mtd: onenand: remove redundant offset check The mtd_block_isbad() interface already checks for this. Signed-off-by: Brian Norris --- drivers/mtd/onenand/onenand_base.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index b3f41f200622..7b7c1d21f612 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -2556,10 +2556,6 @@ static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs) { int ret; - /* Check for invalid offset */ - if (ofs > mtd->size) - return -EINVAL; - onenand_get_device(mtd, FL_READING); ret = onenand_block_isbad_nolock(mtd, ofs, 0); onenand_release_device(mtd); -- cgit v1.2.3 From aaadd9819a128fb7ad988b6808581e3175859e2f Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 23 Aug 2013 23:24:47 -0700 Subject: mtd: nand: remove obsolete 'ecclayout' field This field is never used, except to print it out. Signed-off-by: Brian Norris --- drivers/mtd/nand/fsl_elbc_nand.c | 2 -- drivers/mtd/nand/fsl_ifc_nand.c | 2 -- include/linux/mtd/nand.h | 2 -- 3 files changed, 6 deletions(-) diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 20657209a472..c6ef9f1c7a82 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -650,8 +650,6 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) chip->page_shift); dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n", chip->phys_erase_shift); - dev_dbg(priv->dev, "fsl_elbc_init: nand->ecclayout = %p\n", - chip->ecclayout); dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n", chip->ecc.mode); dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n", diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 317a771f1587..47acda6c4e92 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -718,8 +718,6 @@ static int fsl_ifc_chip_init_tail(struct mtd_info *mtd) chip->page_shift); dev_dbg(priv->dev, "%s: nand->phys_erase_shift = %d\n", __func__, chip->phys_erase_shift); - dev_dbg(priv->dev, "%s: nand->ecclayout = %p\n", __func__, - chip->ecclayout); dev_dbg(priv->dev, "%s: nand->ecc.mode = %d\n", __func__, chip->ecc.mode); dev_dbg(priv->dev, "%s: nand->ecc.steps = %d\n", __func__, diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index ac8e89d5a792..129548169400 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -498,7 +498,6 @@ struct nand_buffers { * supported, 0 otherwise. * @onfi_set_features: [REPLACEABLE] set the features for ONFI nand * @onfi_get_features: [REPLACEABLE] get the features for ONFI nand - * @ecclayout: [REPLACEABLE] the default ECC placement scheme * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash * lookup. @@ -572,7 +571,6 @@ struct nand_chip { uint8_t *oob_poi; struct nand_hw_control *controller; - struct nand_ecclayout *ecclayout; struct nand_ecc_ctrl ecc; struct nand_buffers *buffers; -- cgit v1.2.3 From 6b7368c2305657c5b94ff18f2c8c8a6d7040b45a Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 27 Aug 2013 18:01:19 -0700 Subject: mtd: onenand: remove unused variable assignments These variable assignments are never used (the variables are either never used or are overwritten before use). This resolves some compiler warnings like the following: drivers/mtd/onenand/onenand_base.c: In function 'flexonenand_get_boundary': drivers/mtd/onenand/onenand_base.c:3532:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] drivers/mtd/onenand/onenand_base.c: In function 'onenand_probe': drivers/mtd/onenand/onenand_base.c:3838:6: warning: variable 'maf_id' set but not used [-Wunused-but-set-variable] Signed-off-by: Brian Norris Cc: Kyungmin Park --- drivers/mtd/onenand/onenand_base.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 7b7c1d21f612..1de33b5d3903 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -3525,7 +3525,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd) { struct onenand_chip *this = mtd->priv; unsigned die, bdry; - int ret, syscfg, locked; + int syscfg, locked; /* Disable ECC */ syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1); @@ -3536,7 +3536,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd) this->wait(mtd, FL_SYNCING); this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); - ret = this->wait(mtd, FL_READING); + this->wait(mtd, FL_READING); bdry = this->read_word(this->base + ONENAND_DATARAM); if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3) @@ -3546,7 +3546,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd) this->boundary[die] = bdry & FLEXONENAND_PI_MASK; this->command(mtd, ONENAND_CMD_RESET, 0, 0); - ret = this->wait(mtd, FL_RESETING); + this->wait(mtd, FL_RESETING); printk(KERN_INFO "Die %d boundary: %d%s\n", die, this->boundary[die], locked ? "(Locked)" : "(Unlocked)"); @@ -3730,7 +3730,7 @@ static int flexonenand_set_boundary(struct mtd_info *mtd, int die, /* Check is boundary is locked */ this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); - ret = this->wait(mtd, FL_READING); + this->wait(mtd, FL_READING); thisboundary = this->read_word(this->base + ONENAND_DATARAM); if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) { @@ -3831,7 +3831,7 @@ static int onenand_chip_probe(struct mtd_info *mtd) static int onenand_probe(struct mtd_info *mtd) { struct onenand_chip *this = mtd->priv; - int maf_id, dev_id, ver_id; + int dev_id, ver_id; int density; int ret; @@ -3839,8 +3839,7 @@ static int onenand_probe(struct mtd_info *mtd) if (ret) return ret; - /* Read manufacturer and device IDs from Register */ - maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID); + /* Device and version IDs from Register */ dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID); this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY); -- cgit v1.2.3 From 535ab9033433c00116e446beaac96503c7282fd1 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 28 Aug 2013 11:19:05 -0700 Subject: mtd: lpddr_cmds: make function static do_xxlock() is only used locally. This silences a sparse warning: drivers/mtd/lpddr/lpddr_cmds.c:706:5: warning: no previous prototype for 'do_xxlock' [-Wmissing-prototypes] Signed-off-by: Brian Norris --- drivers/mtd/lpddr/lpddr_cmds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c index d3cfe26beeaa..2ef19aa0086b 100644 --- a/drivers/mtd/lpddr/lpddr_cmds.c +++ b/drivers/mtd/lpddr/lpddr_cmds.c @@ -703,7 +703,7 @@ static int lpddr_erase(struct mtd_info *mtd, struct erase_info *instr) #define DO_XXLOCK_LOCK 1 #define DO_XXLOCK_UNLOCK 2 -int do_xxlock(struct mtd_info *mtd, loff_t adr, uint32_t len, int thunk) +static int do_xxlock(struct mtd_info *mtd, loff_t adr, uint32_t len, int thunk) { int ret = 0; struct map_info *map = mtd->priv; -- cgit v1.2.3 From c7f23a70635895b5125aeb5593aaf8cb44d3a088 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 13 Aug 2013 10:51:55 -0700 Subject: mtd: nand: cleanup ONFI printed errors, warnings The ONFI detection routine is too verbose in some cases and not verbose enough in others. This patch refactors it to print only when there are significant warnings/errors. Probing in 16-bit mode: It is unnecessary to print until after the READID (address 20h) command. READID *has* to work properly in whatever bus width configuration we are in, or else no identification mode works. So we can silence some useless warnings on systems which come up in 16-bit mode and do not even respond with an O-N-F-I string. Valid parameter page: Nobody needs to see this. Do we inform the user every time other hardware responds properly? Instead, add an error message if *no* uncorrupted parameter pages are found. ONFI ECC: Most drivers don't yet use the reported minimum ECC values, so it shouldn't yet be a fatal condition if the extended parameter page is incorrect. But we should at least give a warning for the corner cases that we don't expect. ONFI flash detected: Nobody needs to see this. This is the expected case, that we detect ONFI properly, or else it wasn't ONFI-compliant and is detected by some other routine. Signed-off-by: Brian Norris Cc: Huang Shijie Cc: Ezequiel Garcia --- drivers/mtd/nand/nand_base.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index d340b2f198c6..00022b456dff 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2935,29 +2935,34 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, int i; int val; - /* ONFI need to be probed in 8 bits mode, and 16 bits should be selected with NAND_BUSWIDTH_AUTO */ - if (chip->options & NAND_BUSWIDTH_16) { - pr_err("Trying ONFI probe in 16 bits mode, aborting !\n"); - return 0; - } /* Try ONFI for unknown chip or LP */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1); if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' || chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I') return 0; + /* + * ONFI must be probed in 8-bit mode or with NAND_BUSWIDTH_AUTO, not + * with NAND_BUSWIDTH_16 + */ + if (chip->options & NAND_BUSWIDTH_16) { + pr_err("ONFI cannot be probed in 16-bit mode; aborting\n"); + return 0; + } + chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); for (i = 0; i < 3; i++) { chip->read_buf(mtd, (uint8_t *)p, sizeof(*p)); if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) == le16_to_cpu(p->crc)) { - pr_info("ONFI param page %d valid\n", i); break; } } - if (i == 3) + if (i == 3) { + pr_err("Could not find valid ONFI parameter page; aborting\n"); return 0; + } /* Check version */ val = le16_to_cpu(p->revision); @@ -3009,10 +3014,11 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, /* The Extended Parameter Page is supported since ONFI 2.1. */ if (nand_flash_detect_ext_param_page(mtd, chip, p)) - pr_info("Failed to detect the extended param page.\n"); + pr_warn("Failed to detect ONFI extended param page\n"); + } else { + pr_warn("Could not retrieve ONFI ECC requirements\n"); } - pr_info("ONFI flash detected\n"); return 1; } -- cgit v1.2.3 From 86bc7bddc9bf7841372df5880805506228dbf4f4 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 7 Aug 2013 20:16:49 +0200 Subject: mtd: onenand: omap: remove two unused functions Nothing calls omap2_onenand_rephase(). And __adjust_timing() is only called by omap2_onenand_rephase(). Remove these two unused functions. Signed-off-by: Paul Bolle Signed-off-by: Brian Norris --- drivers/mtd/onenand/omap2.c | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 558071bf92de..2362909d20c0 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -573,28 +573,6 @@ static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, static struct platform_driver omap2_onenand_driver; -static int __adjust_timing(struct device *dev, void *data) -{ - int ret = 0; - struct omap2_onenand *c; - - c = dev_get_drvdata(dev); - - BUG_ON(c->setup == NULL); - - /* DMA is not in use so this is all that is needed */ - /* Revisit for OMAP3! */ - ret = c->setup(c->onenand.base, &c->freq); - - return ret; -} - -int omap2_onenand_rephase(void) -{ - return driver_for_each_device(&omap2_onenand_driver.driver, NULL, - NULL, __adjust_timing); -} - static void omap2_onenand_shutdown(struct platform_device *pdev) { struct omap2_onenand *c = dev_get_drvdata(&pdev->dev); -- cgit v1.2.3 From e9d8da807d818ce8e8399f528fd8efaac3eef36b Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Wed, 18 Sep 2013 11:31:19 +0800 Subject: mtd: atmel_nand: remove #if defined(CONFIG_OF) around OF-specific code Since the of specific code are declared in regardless of CONFIG_OF. Remove the #if defined(CONFIG_OF) guard and use an IS_ENABLED(CONFIG_OF) instead. Thanks to Ezequiel Garcia's for this protype. Signed-off-by: Josh Wu Acked-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/nand/atmel_nand.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 060feeaf6b3e..72c26112df85 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -1449,7 +1449,6 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) ecc_writel(host->ecc, CR, ATMEL_ECC_RST); } -#if defined(CONFIG_OF) static int atmel_of_init_port(struct atmel_nand_host *host, struct device_node *np) { @@ -1457,7 +1456,7 @@ static int atmel_of_init_port(struct atmel_nand_host *host, u32 offset[2]; int ecc_mode; struct atmel_nand_data *board = &host->board; - enum of_gpio_flags flags; + enum of_gpio_flags flags = 0; if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) { if (val >= 32) { @@ -1540,13 +1539,6 @@ static int atmel_of_init_port(struct atmel_nand_host *host, return 0; } -#else -static int atmel_of_init_port(struct atmel_nand_host *host, - struct device_node *np) -{ - return -EINVAL; -} -#endif static int __init atmel_hw_nand_init_params(struct platform_device *pdev, struct atmel_nand_host *host) @@ -2019,7 +2011,8 @@ static int __init atmel_nand_probe(struct platform_device *pdev) mtd = &host->mtd; nand_chip = &host->nand_chip; host->dev = &pdev->dev; - if (pdev->dev.of_node) { + if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) { + /* Only when CONFIG_OF is enabled of_node can be parsed */ res = atmel_of_init_port(host, pdev->dev.of_node); if (res) goto err_nand_ioremap; @@ -2207,14 +2200,12 @@ static int __exit atmel_nand_remove(struct platform_device *pdev) return 0; } -#if defined(CONFIG_OF) static const struct of_device_id atmel_nand_dt_ids[] = { { .compatible = "atmel,at91rm9200-nand" }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, atmel_nand_dt_ids); -#endif static int atmel_nand_nfc_probe(struct platform_device *pdev) { @@ -2253,12 +2244,10 @@ static int atmel_nand_nfc_probe(struct platform_device *pdev) return 0; } -#if defined(CONFIG_OF) static struct of_device_id atmel_nand_nfc_match[] = { { .compatible = "atmel,sama5d3-nfc" }, { /* sentinel */ } }; -#endif static struct platform_driver atmel_nand_nfc_driver = { .driver = { -- cgit v1.2.3 From 81f29b475dae3ebd73a98cde29ef8f3c9670865c Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Wed, 18 Sep 2013 11:31:20 +0800 Subject: mtd: atmel_nand: add MODULE_DEVICE_TABLE for nfc driver This patch also add a const keyword for the of_device_id of nfc. Signed-off-by: Josh Wu Acked-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/nand/atmel_nand.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 72c26112df85..5a5d4572585c 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -2244,10 +2244,11 @@ static int atmel_nand_nfc_probe(struct platform_device *pdev) return 0; } -static struct of_device_id atmel_nand_nfc_match[] = { +static const struct of_device_id atmel_nand_nfc_match[] = { { .compatible = "atmel,sama5d3-nfc" }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, atmel_nand_nfc_match); static struct platform_driver atmel_nand_nfc_driver = { .driver = { -- cgit v1.2.3 From 2a3d933a46e9948e01fc34348bed0baec8d8bf2b Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Wed, 18 Sep 2013 13:58:48 +0800 Subject: mtd: atmel_nand: use minimum ecc requirements of nand: ecc_{strength,step}_ds Since ecc_{strength,step}_ds is introduced in nand_chip structure for minimum ecc requirements. So we can use them directly and remove our own get_onfi_ecc_param function. Signed-off-by: Josh Wu Signed-off-by: Brian Norris --- drivers/mtd/nand/atmel_nand.c | 46 +++++++++---------------------------------- 1 file changed, 9 insertions(+), 37 deletions(-) diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 5a5d4572585c..ef9c9f547c01 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -1062,56 +1062,28 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) } /* - * Get ECC requirement in ONFI parameters, returns -1 if ONFI - * parameters is not supported. - * return 0 if success to get the ECC requirement. - */ -static int get_onfi_ecc_param(struct nand_chip *chip, - int *ecc_bits, int *sector_size) -{ - *ecc_bits = *sector_size = 0; - - if (chip->onfi_params.ecc_bits == 0xff) - /* TODO: the sector_size and ecc_bits need to be find in - * extended ecc parameter, currently we don't support it. - */ - return -1; - - *ecc_bits = chip->onfi_params.ecc_bits; - - /* The default sector size (ecc codeword size) is 512 */ - *sector_size = 512; - - return 0; -} - -/* - * Get ecc requirement from ONFI parameters ecc requirement. + * Get minimum ecc requirements from NAND. * If pmecc-cap, pmecc-sector-size in DTS are not specified, this function - * will set them according to ONFI ecc requirement. Otherwise, use the + * will set them according to minimum ecc requirement. Otherwise, use the * value in DTS file. * return 0 if success. otherwise return error code. */ static int pmecc_choose_ecc(struct atmel_nand_host *host, int *cap, int *sector_size) { - /* Get ECC requirement from ONFI parameters */ - *cap = *sector_size = 0; - if (host->nand_chip.onfi_version) { - if (!get_onfi_ecc_param(&host->nand_chip, cap, sector_size)) - dev_info(host->dev, "ONFI params, minimum required ECC: %d bits in %d bytes\n", + /* Get minimum ECC requirements */ + if (host->nand_chip.ecc_strength_ds) { + *cap = host->nand_chip.ecc_strength_ds; + *sector_size = host->nand_chip.ecc_step_ds; + dev_info(host->dev, "minimum ECC: %d bits in %d bytes\n", *cap, *sector_size); - else - dev_info(host->dev, "NAND chip ECC reqirement is in Extended ONFI parameter, we don't support yet.\n"); } else { - dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes"); - } - if (*cap == 0 && *sector_size == 0) { *cap = 2; *sector_size = 512; + dev_info(host->dev, "can't detect min. ECC, assume 2 bits in 512 bytes\n"); } - /* If dts file doesn't specify then use the one in ONFI parameters */ + /* If device tree doesn't specify, use NAND's minimum ECC parameters */ if (host->pmecc_corr_cap == 0) { /* use the most fitable ecc bits (the near bigger one ) */ if (*cap <= 2) -- cgit v1.2.3 From 4ae7d228d6048d25a16bee209ebea24c5ecde825 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 16 Sep 2013 18:20:21 -0700 Subject: mtd: nand: correct extemded param page error handling If the ONFI extended parameter page gives codeword_size == 0, the extended ECC information is corrupt and should not be used. Currently, we (correctly) avoid using the information, but we don't report the error to the caller, so the caller doesn't know that we didn't initialize ecc_strength_ds and ecc_step_ds. Now the caller can warn the user that it does not have sufficient information. This also removes the false and useless "ONFI extended param page detected" debug message (it was printed even on the aforementioned corruption, and for the success case, we don't really want a print). Signed-off-by: Brian Norris Acked-by: Huang Shijie --- drivers/mtd/nand/nand_base.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 00022b456dff..0b39d0c03f1e 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2912,12 +2912,13 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, /* get the info we want. */ ecc = (struct onfi_ext_ecc_info *)cursor; - if (ecc->codeword_size) { - chip->ecc_strength_ds = ecc->ecc_bits; - chip->ecc_step_ds = 1 << ecc->codeword_size; + if (!ecc->codeword_size) { + pr_debug("Invalid codeword size\n"); + goto ext_out; } - pr_info("ONFI extended param page detected.\n"); + chip->ecc_strength_ds = ecc->ecc_bits; + chip->ecc_step_ds = 1 << ecc->codeword_size; ret = 0; ext_out: -- cgit v1.2.3 From 1d0ed69ddd714b6e2a974f42896463366923ded6 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:10 +0800 Subject: mtd: nand: add a helper to check the SLC/MLC nand chip Add a helper to check if a nand chip is SLC or MLC. This helper makes the code more readable. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/denali.c | 2 +- drivers/mtd/nand/nand_base.c | 14 ++++++-------- include/linux/mtd/nand.h | 9 +++++++++ 3 files changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 154b033b4e8e..370b9dd7a278 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1520,7 +1520,7 @@ int denali_init(struct denali_nand_info *denali) * so just let controller do 15bit ECC for MLC and 8bit ECC for * SLC if possible. * */ - if (denali->nand.cellinfo & NAND_CI_CELLTYPE_MSK && + if (!nand_is_slc(&denali->nand) && (denali->mtd.oobsize > (denali->bbtskipbytes + ECC_15BITS * (denali->mtd.writesize / ECC_SECTOR_SIZE)))) { diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 0b39d0c03f1e..6ea66270dbf5 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3108,8 +3108,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, * ID to decide what to do. */ if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG && - (chip->cellinfo & NAND_CI_CELLTYPE_MSK) && - id_data[5] != 0x00) { + !nand_is_slc(chip) && id_data[5] != 0x00) { /* Calc pagesize */ mtd->writesize = 2048 << (extid & 0x03); extid >>= 2; @@ -3141,7 +3140,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, (((extid >> 1) & 0x04) | (extid & 0x03)); *busw = 0; } else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX && - (chip->cellinfo & NAND_CI_CELLTYPE_MSK)) { + !nand_is_slc(chip)) { unsigned int tmp; /* Calc pagesize */ @@ -3204,7 +3203,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, * - ID byte 5, bit[7]: 1 -> BENAND, 0 -> raw SLC */ if (id_len >= 6 && id_data[0] == NAND_MFR_TOSHIBA && - !(chip->cellinfo & NAND_CI_CELLTYPE_MSK) && + nand_is_slc(chip) && (id_data[5] & 0x7) == 0x6 /* 24nm */ && !(id_data[4] & 0x80) /* !BENAND */) { mtd->oobsize = 32 * mtd->writesize >> 9; @@ -3265,11 +3264,11 @@ static void nand_decode_bbm_options(struct mtd_info *mtd, * Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba, * AMD/Spansion, and Macronix. All others scan only the first page. */ - if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) && + if (!nand_is_slc(chip) && (maf_id == NAND_MFR_SAMSUNG || maf_id == NAND_MFR_HYNIX)) chip->bbt_options |= NAND_BBT_SCANLASTPAGE; - else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) && + else if ((nand_is_slc(chip) && (maf_id == NAND_MFR_SAMSUNG || maf_id == NAND_MFR_HYNIX || maf_id == NAND_MFR_TOSHIBA || @@ -3745,8 +3744,7 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.total = chip->ecc.steps * chip->ecc.bytes; /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ - if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && - !(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) { + if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { switch (chip->ecc.steps) { case 2: mtd->subpage_sft = 1; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 129548169400..5c05bab0ad89 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -795,4 +795,13 @@ static inline int onfi_get_sync_timing_mode(struct nand_chip *chip) return le16_to_cpu(chip->onfi_params.src_sync_timing_mode); } +/* + * Check if it is a SLC nand. + * The !nand_is_slc() can be used to check the MLC/TLC nand chips. + * We do not distinguish the MLC and TLC now. + */ +static inline bool nand_is_slc(struct nand_chip *chip) +{ + return !(chip->cellinfo & NAND_CI_CELLTYPE_MSK); +} #endif /* __LINUX_MTD_NAND_H */ -- cgit v1.2.3 From 7db906b79f69b6ed936a1ef1d788f02e3ad42462 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:11 +0800 Subject: mtd: nand: rename the cellinfo to bits_per_cell The @cellinfo fields contains unused information, such as write caching, internal chip numbering, etc. But we only use it to check the SLC or MLC. This patch tries to make it more clear and simple, renames the @cellinfo to @bits_per_cell. In order to avoiding the bisect issue, this patch also does the following changes: (0) add a macro NAND_CI_CELLTYPE_SHIFT to avoid the hardcode. (1) add a helper to parse out the cell type : nand_get_bits_per_cell() (2) parse out the cell type for extended-ID chips and the full-id nand chips. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/nand_base.c | 14 ++++++++++++-- include/linux/mtd/nand.h | 7 ++++--- 2 files changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 6ea66270dbf5..5fb00957fd25 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3082,6 +3082,16 @@ static int nand_id_len(u8 *id_data, int arrlen) return arrlen; } +/* Extract the bits of per cell from the 3rd byte of the extended ID */ +static int nand_get_bits_per_cell(u8 cellinfo) +{ + int bits; + + bits = cellinfo & NAND_CI_CELLTYPE_MSK; + bits >>= NAND_CI_CELLTYPE_SHIFT; + return bits + 1; +} + /* * Many new NAND share similar device ID codes, which represent the size of the * chip. The rest of the parameters must be decoded according to generic or @@ -3092,7 +3102,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, { int extid, id_len; /* The 3rd id byte holds MLC / multichip data */ - chip->cellinfo = id_data[2]; + chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]); /* The 4th id byte is the important one */ extid = id_data[3]; @@ -3292,7 +3302,7 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, mtd->erasesize = type->erasesize; mtd->oobsize = type->oobsize; - chip->cellinfo = id_data[2]; + chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]); chip->chipsize = (uint64_t)type->chipsize << 20; chip->options |= type->options; chip->ecc_strength_ds = NAND_ECC_STRENGTH(type); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 5c05bab0ad89..9e6c8f9f306e 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -198,6 +198,7 @@ typedef enum { /* Cell info constants */ #define NAND_CI_CHIPNR_MSK 0x03 #define NAND_CI_CELLTYPE_MSK 0x0C +#define NAND_CI_CELLTYPE_SHIFT 2 /* Keep gcc happy */ struct nand_chip; @@ -477,7 +478,7 @@ struct nand_buffers { * @badblockbits: [INTERN] minimum number of set bits in a good block's * bad block marker position; i.e., BBM == 11110111b is * not bad when badblockbits == 7 - * @cellinfo: [INTERN] MLC/multichip data from chip ident + * @bits_per_cell: [INTERN] number of bits per cell. i.e., 1 means SLC. * @ecc_strength_ds: [INTERN] ECC correctability from the datasheet. * Minimum amount of bit errors per @ecc_step_ds guaranteed * to be correctable. If unknown, set to zero. @@ -558,7 +559,7 @@ struct nand_chip { int pagebuf; unsigned int pagebuf_bitflips; int subpagesize; - uint8_t cellinfo; + uint8_t bits_per_cell; uint16_t ecc_strength_ds; uint16_t ecc_step_ds; int badblockpos; @@ -802,6 +803,6 @@ static inline int onfi_get_sync_timing_mode(struct nand_chip *chip) */ static inline bool nand_is_slc(struct nand_chip *chip) { - return !(chip->cellinfo & NAND_CI_CELLTYPE_MSK); + return chip->bits_per_cell == 1; } #endif /* __LINUX_MTD_NAND_H */ -- cgit v1.2.3 From 1c195e909cbe335b02a5dd01075ba65448927ae6 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:12 +0800 Subject: mtd: nand: add the "bits per cell" info for legacy ID NAND The legacy ID NAND are all SLC. This patch sets 1 to the @bits_per_cell for the legacy ID NAND, which means they are all SLC. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/nand_base.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 5fb00957fd25..aebc7ea9f379 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3238,6 +3238,9 @@ static void nand_decode_id(struct mtd_info *mtd, struct nand_chip *chip, mtd->oobsize = mtd->writesize / 32; *busw = type->options & NAND_BUSWIDTH_16; + /* All legacy ID NAND are small-page, SLC */ + chip->bits_per_cell = 1; + /* * Check for Spansion/AMD ID + repeating 5th, 6th byte since * some Spansion chips have erasesize that conflicts with size -- cgit v1.2.3 From 13fbd17941db6af61337d909fd09b9c7f7634632 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:13 +0800 Subject: mtd: nand: set the cell information for ONFI nand The current code does not set the SLC/MLC information for onfi nand. (This makes that the kernel treats all the onfi nand as SLC nand.) This patch fills the cell information for ONFI nands. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/nand_base.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index aebc7ea9f379..137d6c501f19 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2992,6 +2992,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page); chip->chipsize = le32_to_cpu(p->blocks_per_lun); chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count; + chip->bits_per_cell = p->bits_per_cell; if (onfi_feature(chip) & ONFI_FEATURE_16_BIT_BUS) *busw = NAND_BUSWIDTH_16; -- cgit v1.2.3 From 3723e93c6499d74041c9768aeb921b36490b9585 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:14 +0800 Subject: mtd: nand: print out the cell information for nand chip Print out the cell information for nand chip. (Since the message is too long, this patch also splits the log with two separate pr_info()) Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/nand_base.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 137d6c501f19..55c80efb3081 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3461,11 +3461,13 @@ ident_done: if (mtd->writesize > 512 && chip->cmdfunc == nand_command) chip->cmdfunc = nand_command_lp; - pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s)," - " %dMiB, page size: %d, OOB size: %d\n", + pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id, nand_manuf_ids[maf_idx].name, - chip->onfi_version ? chip->onfi_params.model : type->name, - (int)(chip->chipsize >> 20), mtd->writesize, mtd->oobsize); + chip->onfi_version ? chip->onfi_params.model : type->name); + + pr_info("NAND device: %dMiB, %s, page size: %d, OOB size: %d\n", + (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC", + mtd->writesize, mtd->oobsize); return type; } -- cgit v1.2.3 From 7a2b89acf8edbff462fa6e1fc6100c5dc85364ed Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:15 +0800 Subject: mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2 When we use the ECC info which is get from the nand chip's datasheet, we may have some freed oob area now. This patch rewrites the gpmi_ecc_write_oob() to implement the ecc.write_oob(). We also update the comment for gpmi_hw_ecclayout. Yes! We can support the JFFS2 for the SLC nand now. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 10a092dbaa71..37508eb350d0 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -45,7 +45,10 @@ static struct nand_bbt_descr gpmi_bbt_descr = { .pattern = scan_ff_pattern }; -/* We will use all the (page + OOB). */ +/* + * We may change the layout if we can get the ECC info from the datasheet, + * else we will use all the (page + OOB). + */ static struct nand_ecclayout gpmi_hw_ecclayout = { .eccbytes = 0, .eccpos = { 0, }, @@ -1263,14 +1266,22 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, static int gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) { - /* - * The BCH will use all the (page + oob). - * Our gpmi_hw_ecclayout can only prohibit the JFFS2 to write the oob. - * But it can not stop some ioctls such MEMWRITEOOB which uses - * MTD_OPS_PLACE_OOB. So We have to implement this function to prohibit - * these ioctls too. - */ - return -EPERM; + struct nand_oobfree *of = mtd->ecclayout->oobfree; + int status = 0; + + /* Do we have available oob area? */ + if (!of->length) + return -EPERM; + + if (!nand_is_slc(chip)) + return -EPERM; + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page); + chip->write_buf(mtd, chip->oob_poi + of->offset, of->length); + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + + status = chip->waitfunc(mtd, chip); + return status & NAND_STATUS_FAIL ? -EIO : 0; } static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs) -- cgit v1.2.3 From fda5b0e24dca3d52671e5a6543a285d4e86c55e1 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:16 +0800 Subject: mtd: nand: add more comment for MTD_NANDFLASH/MTD_MLCNANDFLASH In current code, the MTD_NANDFLASH is used to represent both the SLC and MLC. It is confusing to us. By adding an explicit comment about these two macros, this patch makes it clear that: MTD_NANDFLASH : stands for SLC NAND, MTD_MLCNANDFLASH : stands for MLC NAND (including TLC). Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- include/uapi/mtd/mtd-abi.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/uapi/mtd/mtd-abi.h b/include/uapi/mtd/mtd-abi.h index 36eace03b2ac..e89b096856f8 100644 --- a/include/uapi/mtd/mtd-abi.h +++ b/include/uapi/mtd/mtd-abi.h @@ -94,10 +94,10 @@ struct mtd_write_req { #define MTD_RAM 1 #define MTD_ROM 2 #define MTD_NORFLASH 3 -#define MTD_NANDFLASH 4 +#define MTD_NANDFLASH 4 /* SLC NAND */ #define MTD_DATAFLASH 6 #define MTD_UBIVOLUME 7 -#define MTD_MLCNANDFLASH 8 +#define MTD_MLCNANDFLASH 8 /* MLC NAND (including TLC) */ #define MTD_WRITEABLE 0x400 /* Device is writeable */ #define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */ -- cgit v1.2.3 From 818b97392932ac4cecc36ab839957258367004a9 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:17 +0800 Subject: mtd: nand: add a helper to detect the nand type This helper detects that whether the mtd's type is nand type. Now, it's clear that the MTD_NANDFLASH stands for SLC nand only. So use the mtd_type_is_nand() to replace the old check method to do the nand type (include the SLC and MLC) check. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/inftlcore.c | 2 +- drivers/mtd/nftlcore.c | 2 +- drivers/mtd/ssfdc.c | 2 +- drivers/mtd/tests/nandbiterrs.c | 2 +- drivers/mtd/tests/oobtest.c | 2 +- drivers/mtd/tests/pagetest.c | 2 +- drivers/mtd/tests/subpagetest.c | 2 +- include/linux/mtd/mtd.h | 5 +++++ 8 files changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 3af351484098..b66b541877f0 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -50,7 +50,7 @@ static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) struct INFTLrecord *inftl; unsigned long temp; - if (mtd->type != MTD_NANDFLASH || mtd->size > UINT_MAX) + if (!mtd_type_is_nand(mtd) || mtd->size > UINT_MAX) return; /* OK, this is moderately ugly. But probably safe. Alternatives? */ if (memcmp(mtd->name, "DiskOnChip", 10)) diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c index c5f4ebf4b384..46f27de018c3 100644 --- a/drivers/mtd/nftlcore.c +++ b/drivers/mtd/nftlcore.c @@ -50,7 +50,7 @@ static void nftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) struct NFTLrecord *nftl; unsigned long temp; - if (mtd->type != MTD_NANDFLASH || mtd->size > UINT_MAX) + if (!mtd_type_is_nand(mtd) || mtd->size > UINT_MAX) return; /* OK, this is moderately ugly. But probably safe. Alternatives? */ if (memcmp(mtd->name, "DiskOnChip", 10)) diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c index ab2a52a039c3..daf82ba7aba0 100644 --- a/drivers/mtd/ssfdc.c +++ b/drivers/mtd/ssfdc.c @@ -290,7 +290,7 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) int cis_sector; /* Check for small page NAND flash */ - if (mtd->type != MTD_NANDFLASH || mtd->oobsize != OOB_SIZE || + if (!mtd_type_is_nand(mtd) || mtd->oobsize != OOB_SIZE || mtd->size > UINT_MAX) return; diff --git a/drivers/mtd/tests/nandbiterrs.c b/drivers/mtd/tests/nandbiterrs.c index 3cd3aabbe1cd..6f976159611f 100644 --- a/drivers/mtd/tests/nandbiterrs.c +++ b/drivers/mtd/tests/nandbiterrs.c @@ -349,7 +349,7 @@ static int __init mtd_nandbiterrs_init(void) goto exit_mtddev; } - if (mtd->type != MTD_NANDFLASH) { + if (!mtd_type_is_nand(mtd)) { pr_info("this test requires NAND flash\n"); err = -ENODEV; goto exit_nand; diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c index ff35c465bfee..2e9e2d11f204 100644 --- a/drivers/mtd/tests/oobtest.c +++ b/drivers/mtd/tests/oobtest.c @@ -289,7 +289,7 @@ static int __init mtd_oobtest_init(void) return err; } - if (mtd->type != MTD_NANDFLASH) { + if (!mtd_type_is_nand(mtd)) { pr_info("this test requires NAND flash\n"); goto out; } diff --git a/drivers/mtd/tests/pagetest.c b/drivers/mtd/tests/pagetest.c index 44b96e999ad4..ed2d3f656fd2 100644 --- a/drivers/mtd/tests/pagetest.c +++ b/drivers/mtd/tests/pagetest.c @@ -353,7 +353,7 @@ static int __init mtd_pagetest_init(void) return err; } - if (mtd->type != MTD_NANDFLASH) { + if (!mtd_type_is_nand(mtd)) { pr_info("this test requires NAND flash\n"); goto out; } diff --git a/drivers/mtd/tests/subpagetest.c b/drivers/mtd/tests/subpagetest.c index e2c0adf24cfc..a876371ad410 100644 --- a/drivers/mtd/tests/subpagetest.c +++ b/drivers/mtd/tests/subpagetest.c @@ -299,7 +299,7 @@ static int __init mtd_subpagetest_init(void) return err; } - if (mtd->type != MTD_NANDFLASH) { + if (!mtd_type_is_nand(mtd)) { pr_info("this test requires NAND flash\n"); goto out; } diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index f9bfe526d310..88409b813418 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -354,6 +354,11 @@ static inline int mtd_has_oob(const struct mtd_info *mtd) return mtd->_read_oob && mtd->_write_oob; } +static inline int mtd_type_is_nand(const struct mtd_info *mtd) +{ + return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH; +} + static inline int mtd_can_have_bb(const struct mtd_info *mtd) { return !!mtd->_block_isbad; -- cgit v1.2.3 From 4f8a3ba700b882f61d4cea2d68a8f83fa93c6dfd Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:18 +0800 Subject: mtd: mtd-abi: add a helper to detect the nand type The helper is for user applications, and it is just a copy of the kernel helper: mtd_type_is_nand(); Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- include/uapi/mtd/mtd-abi.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/uapi/mtd/mtd-abi.h b/include/uapi/mtd/mtd-abi.h index e89b096856f8..e272ea060e38 100644 --- a/include/uapi/mtd/mtd-abi.h +++ b/include/uapi/mtd/mtd-abi.h @@ -275,4 +275,9 @@ enum mtd_file_modes { MTD_FILE_MODE_RAW, }; +static inline int mtd_type_is_nand_user(const struct mtd_info_user *mtd) +{ + return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH; +} + #endif /* __MTD_ABI_H__ */ -- cgit v1.2.3 From f48372465ffdff62a6d75a6f34bc850855fb6470 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:19 +0800 Subject: mtd: add MTD_MLCNANDFLASH case for mtd_type_show() The current mtd_type_show() misses the MTD_MLCNANDFLASH case. This patch adds the case for it, and also updates the ABI. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- Documentation/ABI/testing/sysfs-class-mtd | 2 +- drivers/mtd/mtdcore.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd index bfd119ace6ad..1399bb2da3eb 100644 --- a/Documentation/ABI/testing/sysfs-class-mtd +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -104,7 +104,7 @@ Description: One of the following ASCII strings, representing the device type: - absent, ram, rom, nor, nand, dataflash, ubi, unknown + absent, ram, rom, nor, nand, mlc-nand, dataflash, ubi, unknown What: /sys/class/mtd/mtdX/writesize Date: April 2009 diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 5e14d540ba2f..92311a56939f 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -157,6 +157,9 @@ static ssize_t mtd_type_show(struct device *dev, case MTD_UBIVOLUME: type = "ubi"; break; + case MTD_MLCNANDFLASH: + type = "mlc-nand"; + break; default: type = "unknown"; } -- cgit v1.2.3 From e104f1e9dab6726187810f5d9e06cadb946d4a61 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:20 +0800 Subject: jffs2: do not support the MLC nand We should not support the MLC nand for jffs2. So if the nand type is MLC, we quit immediatly. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- fs/jffs2/fs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c index fe3c0527545f..09b3ed455724 100644 --- a/fs/jffs2/fs.c +++ b/fs/jffs2/fs.c @@ -515,6 +515,10 @@ int jffs2_do_fill_super(struct super_block *sb, void *data, int silent) c = JFFS2_SB_INFO(sb); + /* Do not support the MLC nand */ + if (c->mtd->type == MTD_MLCNANDFLASH) + return -EINVAL; + #ifndef CONFIG_JFFS2_FS_WRITEBUFFER if (c->mtd->type == MTD_NANDFLASH) { pr_err("Cannot operate on NAND flash unless jffs2 NAND support is compiled in\n"); -- cgit v1.2.3 From 963d1c285fdf3b9ce93b575b879c1cba4a23d958 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:21 +0800 Subject: mtd: nand: fix the wrong mtd->type for nand chip Current code sets the mtd->type with MTD_NANDFLASH for both SLC and MLC. So the jffs2 may supports the MLC nand, but in actually, the jffs2 should not support the MLC. This patch uses the nand_is_slc() to check the nand cell type, and set the mtd->type with the right nand type. After this patch, the jffs2 only supports the SLC nand. The side-effect of this patch: Before this patch, the ioctl(MEMGETINFO) can only return with the MTD_NANDFLASH; but after this patch, the ioctl(MEMGETINFO) will return with the MTD_NANDFLASH for SLC, and MTD_MLCNANDFLASH for MLC. So the user applictions(such as mtd-utils) should also changes a little for this. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 55c80efb3081..848884473229 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3785,7 +3785,7 @@ int nand_scan_tail(struct mtd_info *mtd) chip->options |= NAND_SUBPAGE_READ; /* Fill in remaining MTD driver data */ - mtd->type = MTD_NANDFLASH; + mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH; mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM : MTD_CAP_NANDFLASH; mtd->_erase = nand_erase; -- cgit v1.2.3 From 14ac07856fee903879f11932e313695de8156e9c Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 9 Sep 2013 14:42:52 +0900 Subject: mtd: plat-ram: Remove casting the return value which is a void pointer Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han Signed-off-by: Brian Norris --- drivers/mtd/maps/plat-ram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 676271659b37..3e35b9a330c7 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -55,7 +55,7 @@ struct platram_info { static inline struct platram_info *to_platram_info(struct platform_device *dev) { - return (struct platram_info *)platform_get_drvdata(dev); + return platform_get_drvdata(dev); } /* platram_setrw -- cgit v1.2.3 From e6db7c8484187f8bf6012cbc700f7b62cdc809be Mon Sep 17 00:00:00 2001 From: Flavio Silveira Date: Tue, 3 Sep 2013 20:25:54 -0300 Subject: mtd: m25p80: Add support for ESMT F25L32PA This flashchip is used in D-Link DIR-610 A1 router board and maybe several others, yet is not kernel upstream. So add support for it according to datasheet [0], making it easier to support other boards using this flashchip in the future. [0] http://www.esmt.com.tw/DB/manager/upload/F25L32PA.pdf Signed-off-by: Flavio Silveira Signed-off-by: Brian Norris --- drivers/mtd/devices/m25p80.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 6bc9618af094..fbc8e7308027 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -756,6 +756,9 @@ static const struct spi_device_id m25p_ids[] = { { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) }, + /* ESMT */ + { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) }, + /* Everspin */ { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) }, { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, M25P_NO_ERASE | M25P_NO_FR) }, -- cgit v1.2.3 From 14a95b8a23133f1b21bb3e8b05d24d03ab5722c0 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 12 Aug 2013 15:10:47 +0530 Subject: mtd: diskonchip: Fix incorrect placement of __initdata __initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/nand/diskonchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index eaa3c29ad860..b68a4959f700 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -38,7 +38,7 @@ #define CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS 0 #endif -static unsigned long __initdata doc_locations[] = { +static unsigned long doc_locations[] __initdata = { #if defined (__alpha__) || defined(__i386__) || defined(__x86_64__) #ifdef CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH 0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, -- cgit v1.2.3 From 2a46f83570380ee2f5893a5bb2402ce2945f4f23 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Wed, 2 Oct 2013 18:42:29 +0200 Subject: mtd: phram: Make phram 64-bit compatible phram was 32-bit limited by design. Machines are growing up, but phram module is still useful. Update it. The patch is bigger than minimum, because simple_strtoul() is obsolete. Tested on MIPS64 and compile-tested for PPC (32 bit). Signed-off-by: Alexander Sverdlin Reviewed-by: Joern Engel Signed-off-by: Brian Norris --- drivers/mtd/devices/phram.c | 66 ++++++++++++++++++++++----------------------- 1 file changed, 33 insertions(+), 33 deletions(-) diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index 67823de68db6..e1f2aebaa489 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -94,7 +94,7 @@ static void unregister_devices(void) } } -static int register_device(char *name, unsigned long start, unsigned long len) +static int register_device(char *name, phys_addr_t start, size_t len) { struct phram_mtd_list *new; int ret = -ENOMEM; @@ -141,35 +141,35 @@ out0: return ret; } -static int ustrtoul(const char *cp, char **endp, unsigned int base) +static int parse_num64(uint64_t *num64, char *token) { - unsigned long result = simple_strtoul(cp, endp, base); - - switch (**endp) { - case 'G': - result *= 1024; - case 'M': - result *= 1024; - case 'k': - result *= 1024; + size_t len; + int shift = 0; + int ret; + + len = strlen(token); /* By dwmw2 editorial decree, "ki", "Mi" or "Gi" are to be used. */ - if ((*endp)[1] == 'i') - (*endp) += 2; + if (len > 2) { + if (token[len - 1] == 'i') { + switch (token[len - 2]) { + case 'G': + shift += 10; + case 'M': + shift += 10; + case 'k': + shift += 10; + token[len - 2] = 0; + break; + default: + return -EINVAL; + } + } } - return result; -} -static int parse_num32(uint32_t *num32, const char *token) -{ - char *endp; - unsigned long n; + ret = kstrtou64(token, 0, num64); + *num64 <<= shift; - n = ustrtoul(token, &endp, 0); - if (*endp) - return -EINVAL; - - *num32 = n; - return 0; + return ret; } static int parse_name(char **pname, const char *token) @@ -209,19 +209,19 @@ static inline void kill_final_newline(char *str) * This shall contain the module parameter if any. It is of the form: * - phram=,
, for module case * - phram.phram=,
, for built-in case - * We leave 64 bytes for the device name, 12 for the address and 12 for the + * We leave 64 bytes for the device name, 20 for the address and 20 for the * size. * Example: phram.phram=rootfs,0xa0000000,512Mi */ -static __initdata char phram_paramline[64+12+12]; +static __initdata char phram_paramline[64 + 20 + 20]; static int __init phram_setup(const char *val) { - char buf[64+12+12], *str = buf; + char buf[64 + 20 + 20], *str = buf; char *token[3]; char *name; - uint32_t start; - uint32_t len; + uint64_t start; + uint64_t len; int i, ret; if (strnlen(val, sizeof(buf)) >= sizeof(buf)) @@ -243,13 +243,13 @@ static int __init phram_setup(const char *val) if (ret) return ret; - ret = parse_num32(&start, token[1]); + ret = parse_num64(&start, token[1]); if (ret) { kfree(name); parse_err("illegal start address\n"); } - ret = parse_num32(&len, token[2]); + ret = parse_num64(&len, token[2]); if (ret) { kfree(name); parse_err("illegal device length\n"); @@ -257,7 +257,7 @@ static int __init phram_setup(const char *val) ret = register_device(name, start, len); if (!ret) - pr_info("%s device: %#x at %#x\n", name, len, start); + pr_info("%s device: %#llx at %#llx\n", name, len, start); else kfree(name); -- cgit v1.2.3 From fe7feb9983dc4f5caadc72c11cee1f1162930533 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 23 Sep 2013 10:29:58 +0900 Subject: mtd: intel_vr_nor: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: Brian Norris --- drivers/mtd/maps/intel_vr_nor.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c index f581ac1cf022..46d195fca942 100644 --- a/drivers/mtd/maps/intel_vr_nor.c +++ b/drivers/mtd/maps/intel_vr_nor.c @@ -180,7 +180,6 @@ static void vr_nor_pci_remove(struct pci_dev *dev) { struct vr_nor_mtd *p = pci_get_drvdata(dev); - pci_set_drvdata(dev, NULL); vr_nor_destroy_partitions(p); vr_nor_destroy_mtd_setup(p); vr_nor_destroy_maps(p); -- cgit v1.2.3 From cd688920c549da7dbe303dfe21575d4a88adde38 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 23 Sep 2013 10:30:52 +0900 Subject: mtd: pci: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: Brian Norris --- drivers/mtd/maps/pci.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c index c2604f8b2a5e..36da518915b5 100644 --- a/drivers/mtd/maps/pci.c +++ b/drivers/mtd/maps/pci.c @@ -316,7 +316,6 @@ static void mtd_pci_remove(struct pci_dev *dev) map->exit(dev, map); kfree(map); - pci_set_drvdata(dev, NULL); pci_release_regions(dev); } -- cgit v1.2.3 From 4d47011b39a8a2cd29560fee708681b20a5e9a8b Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 23 Sep 2013 10:31:30 +0900 Subject: mtd: scb2_flash: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: Brian Norris --- drivers/mtd/maps/scb2_flash.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c index c77b68c9412f..3051c4c36240 100644 --- a/drivers/mtd/maps/scb2_flash.c +++ b/drivers/mtd/maps/scb2_flash.c @@ -212,7 +212,6 @@ static void scb2_flash_remove(struct pci_dev *dev) if (!region_fail) release_mem_region(SCB2_ADDR, SCB2_WINDOW); - pci_set_drvdata(dev, NULL); } static struct pci_device_id scb2_flash_pci_ids[] = { -- cgit v1.2.3 From 60d0dc7fa1615bc8b021fef253f3a17dd4f90e70 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 23 Sep 2013 10:32:27 +0900 Subject: mtd: denali: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: Brian Norris --- drivers/mtd/nand/denali_pci.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c index e3e46623b2b4..033f177a6369 100644 --- a/drivers/mtd/nand/denali_pci.c +++ b/drivers/mtd/nand/denali_pci.c @@ -119,7 +119,6 @@ static void denali_pci_remove(struct pci_dev *dev) iounmap(denali->flash_mem); pci_release_regions(dev); pci_disable_device(dev); - pci_set_drvdata(dev, NULL); kfree(denali); } -- cgit v1.2.3 From 6dcd592022678e44c6fc705ca6f287b4e7ee338f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 30 Sep 2013 15:10:22 +0530 Subject: mtd: nand: lpc32xx_mlc: Remove redundant of_match_ptr The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/nand/lpc32xx_mlc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c index f4dd2a887ea5..327d96c03505 100644 --- a/drivers/mtd/nand/lpc32xx_mlc.c +++ b/drivers/mtd/nand/lpc32xx_mlc.c @@ -905,7 +905,7 @@ static struct platform_driver lpc32xx_nand_driver = { .driver = { .name = DRV_NAME, .owner = THIS_MODULE, - .of_match_table = of_match_ptr(lpc32xx_nand_match), + .of_match_table = lpc32xx_nand_match, }, }; -- cgit v1.2.3 From fea7b5697ba74102f905ecf318a34f2429071a0a Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 30 Sep 2013 15:10:23 +0530 Subject: mtd: nand: lpc32xx_slc: Remove redundant of_match_ptr The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/nand/lpc32xx_slc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c index 6d5f8c515436..23e6974ccd20 100644 --- a/drivers/mtd/nand/lpc32xx_slc.c +++ b/drivers/mtd/nand/lpc32xx_slc.c @@ -1015,7 +1015,7 @@ static struct platform_driver lpc32xx_nand_driver = { .driver = { .name = LPC32XX_MODNAME, .owner = THIS_MODULE, - .of_match_table = of_match_ptr(lpc32xx_nand_match), + .of_match_table = lpc32xx_nand_match, }, }; -- cgit v1.2.3 From 5576bc7bef2919dd2b185bffb768bf9c0da76788 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 30 Sep 2013 15:10:24 +0530 Subject: mtd: nand: pxa3xx_nand: Remove redundant of_match_ptr The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/nand/pxa3xx_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index c28d4e29af1a..e08c3c058904 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1412,7 +1412,7 @@ static int pxa3xx_nand_resume(struct platform_device *pdev) static struct platform_driver pxa3xx_nand_driver = { .driver = { .name = "pxa3xx-nand", - .of_match_table = of_match_ptr(pxa3xx_nand_dt_ids), + .of_match_table = pxa3xx_nand_dt_ids, }, .probe = pxa3xx_nand_probe, .remove = pxa3xx_nand_remove, -- cgit v1.2.3 From 2aabeb20ee4b2f4dce5d4b3855cea42d42c33772 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 8 Oct 2013 20:59:08 -0300 Subject: mtd: Use MTD_BLOCK_MAJOR instead of the magic number Signed-off-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/mtdblock.c | 2 +- drivers/mtd/mtdblock_ro.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index 2aef5dda522b..53884cc25916 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -373,7 +373,7 @@ static void mtdblock_remove_dev(struct mtd_blktrans_dev *dev) static struct mtd_blktrans_ops mtdblock_tr = { .name = "mtdblock", - .major = 31, + .major = MTD_BLOCK_MAJOR, .part_bits = 0, .blksize = 512, .open = mtdblock_open, diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c index 92759a9d2985..70d27b4d632b 100644 --- a/drivers/mtd/mtdblock_ro.c +++ b/drivers/mtd/mtdblock_ro.c @@ -70,7 +70,7 @@ static void mtdblock_remove_dev(struct mtd_blktrans_dev *dev) static struct mtd_blktrans_ops mtdblock_tr = { .name = "mtdblock", - .major = 31, + .major = MTD_BLOCK_MAJOR, .part_bits = 0, .blksize = 512, .readsect = mtdblock_readsect, -- cgit v1.2.3 From fcfd9f2dd786a79400e1e799713ff71e939b40b5 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 8 Oct 2013 14:51:33 +0530 Subject: mtd: sst25l: Remove redundant spi_set_drvdata Driver core will set the driver data to NULL upon detach or probe failure. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/devices/sst25l.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index a42f1f0e7281..7cc70db97e59 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -404,7 +404,6 @@ static int sst25l_probe(struct spi_device *spi) data ? data->nr_parts : 0); if (ret) { kfree(flash); - spi_set_drvdata(spi, NULL); return -ENODEV; } -- cgit v1.2.3 From b38be288140c3d5317bf55439cd3d6fd6395a98e Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 8 Oct 2013 14:51:34 +0530 Subject: mtd: sst25l: Use devm_kzalloc devm_kzalloc is device managed and makes code simpler. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/devices/sst25l.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index 7cc70db97e59..687bf27ec850 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -364,7 +364,7 @@ static int sst25l_probe(struct spi_device *spi) if (!flash_info) return -ENODEV; - flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL); + flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); if (!flash) return -ENOMEM; @@ -402,10 +402,8 @@ static int sst25l_probe(struct spi_device *spi) ret = mtd_device_parse_register(&flash->mtd, NULL, NULL, data ? data->parts : NULL, data ? data->nr_parts : 0); - if (ret) { - kfree(flash); + if (ret) return -ENODEV; - } return 0; } @@ -413,12 +411,8 @@ static int sst25l_probe(struct spi_device *spi) static int sst25l_remove(struct spi_device *spi) { struct sst25l_flash *flash = spi_get_drvdata(spi); - int ret; - ret = mtd_device_unregister(&flash->mtd); - if (ret == 0) - kfree(flash); - return ret; + return mtd_device_unregister(&flash->mtd); } static struct spi_driver sst25l_driver = { -- cgit v1.2.3 From bcecd39ef06ecf27233a30d516367d0be7e9145f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 8 Oct 2013 15:08:19 +0530 Subject: mtd: fsl_ifc_nand: Remove redundant dev_set_drvdata Driver core will set the driver data to NULL upon detach or probe failure. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/nand/fsl_ifc_nand.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 47acda6c4e92..64a30ef1421c 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -905,7 +905,6 @@ static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv) iounmap(priv->vbase); ifc_nand_ctrl->chips[priv->bank] = NULL; - dev_set_drvdata(priv->dev, NULL); return 0; } -- cgit v1.2.3 From c69ad0ef2fa58168b9aec7f7d1561c9e43376239 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 8 Oct 2013 15:08:20 +0530 Subject: mtd: fsl_ifc_nand: Use module_platform_driver module_platform_driver removes boiler plate code and makes it simpler. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/nand/fsl_ifc_nand.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 64a30ef1421c..1c173d91cbea 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -1079,25 +1079,7 @@ static struct platform_driver fsl_ifc_nand_driver = { .remove = fsl_ifc_nand_remove, }; -static int __init fsl_ifc_nand_init(void) -{ - int ret; - - ret = platform_driver_register(&fsl_ifc_nand_driver); - if (ret) - printk(KERN_ERR "fsl-ifc: Failed to register platform" - "driver\n"); - - return ret; -} - -static void __exit fsl_ifc_nand_exit(void) -{ - platform_driver_unregister(&fsl_ifc_nand_driver); -} - -module_init(fsl_ifc_nand_init); -module_exit(fsl_ifc_nand_exit); +module_platform_driver(fsl_ifc_nand_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Freescale"); -- cgit v1.2.3 From ecb598d0b2ca4897a3962aed7680ee3d28dda6e8 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 8 Oct 2013 15:31:45 +0530 Subject: mtd: socrates_nand: Remove redundant dev_set_drvdata Driver core will set the driver data to NULL upon detach or probe failure. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/nand/socrates_nand.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c index 09dde7d27178..f44c7c884a20 100644 --- a/drivers/mtd/nand/socrates_nand.c +++ b/drivers/mtd/nand/socrates_nand.c @@ -211,7 +211,6 @@ static int socrates_nand_probe(struct platform_device *ofdev) nand_release(mtd); out: - dev_set_drvdata(&ofdev->dev, NULL); iounmap(host->io_base); kfree(host); return res; @@ -227,7 +226,6 @@ static int socrates_nand_remove(struct platform_device *ofdev) nand_release(mtd); - dev_set_drvdata(&ofdev->dev, NULL); iounmap(host->io_base); kfree(host); -- cgit v1.2.3 From cf3a9b56a128ec8a1631c29aacb8cf19b55ea73d Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 8 Oct 2013 15:31:46 +0530 Subject: mtd: socrates_nand: Use devm_kzalloc devm_kzalloc is device managed and makes code simpler. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/nand/socrates_nand.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c index f44c7c884a20..e77da7efa200 100644 --- a/drivers/mtd/nand/socrates_nand.c +++ b/drivers/mtd/nand/socrates_nand.c @@ -149,17 +149,13 @@ static int socrates_nand_probe(struct platform_device *ofdev) struct mtd_part_parser_data ppdata; /* Allocate memory for the device structure (and zero it) */ - host = kzalloc(sizeof(struct socrates_nand_host), GFP_KERNEL); - if (!host) { - printk(KERN_ERR - "socrates_nand: failed to allocate device structure.\n"); + host = devm_kzalloc(&ofdev->dev, sizeof(*host), GFP_KERNEL); + if (!host) return -ENOMEM; - } host->io_base = of_iomap(ofdev->dev.of_node, 0); if (host->io_base == NULL) { printk(KERN_ERR "socrates_nand: ioremap failed\n"); - kfree(host); return -EIO; } @@ -212,7 +208,6 @@ static int socrates_nand_probe(struct platform_device *ofdev) out: iounmap(host->io_base); - kfree(host); return res; } @@ -227,7 +222,6 @@ static int socrates_nand_remove(struct platform_device *ofdev) nand_release(mtd); iounmap(host->io_base); - kfree(host); return 0; } -- cgit v1.2.3 From 5422933d58c28ebc67c7425f20e85ef27b730188 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 8 Oct 2013 15:38:08 +0530 Subject: mtd: socrates_nand: Use dev_err instead of printk dev_err is preferred to printk. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/nand/socrates_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c index e77da7efa200..9a9fa4949b4f 100644 --- a/drivers/mtd/nand/socrates_nand.c +++ b/drivers/mtd/nand/socrates_nand.c @@ -155,7 +155,7 @@ static int socrates_nand_probe(struct platform_device *ofdev) host->io_base = of_iomap(ofdev->dev.of_node, 0); if (host->io_base == NULL) { - printk(KERN_ERR "socrates_nand: ioremap failed\n"); + dev_err(&ofdev->dev, "ioremap failed\n"); return -EIO; } -- cgit v1.2.3 From 9fee840c03d944ed1564c127375a702e242d9555 Mon Sep 17 00:00:00 2001 From: Mike Dunn Date: Thu, 10 Oct 2013 10:25:27 -0700 Subject: mtd: docg4: fix status polling loop The loop that polls the status register waiting for an operation to complete foolishly bases the timeout simply on the number of loop iterations that have ocurred. When I increased the processor clock speed, timeouts started to appear for long block erasure operations. This patch measures the timeout using jiffies. Signed-off-by: Mike Dunn Signed-off-by: Brian Norris --- drivers/mtd/nand/docg4.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index 7c38b8ad4404..bd1cb672034f 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -44,6 +44,7 @@ #include #include #include +#include /* * In "reliable mode" consecutive 2k pages are used in parallel (in some @@ -269,7 +270,7 @@ static int poll_status(struct docg4_priv *doc) */ uint16_t flash_status; - unsigned int timeo; + unsigned long timeo; void __iomem *docptr = doc->virtadr; dev_dbg(doc->dev, "%s...\n", __func__); @@ -277,22 +278,18 @@ static int poll_status(struct docg4_priv *doc) /* hardware quirk requires reading twice initially */ flash_status = readw(docptr + DOC_FLASHCONTROL); - timeo = 1000; + timeo = jiffies + msecs_to_jiffies(200); /* generous timeout */ do { cpu_relax(); flash_status = readb(docptr + DOC_FLASHCONTROL); - } while (!(flash_status & DOC_CTRL_FLASHREADY) && --timeo); + } while (!(flash_status & DOC_CTRL_FLASHREADY) && + time_before(jiffies, timeo)); - - if (!timeo) { + if (unlikely(!(flash_status & DOC_CTRL_FLASHREADY))) { dev_err(doc->dev, "%s: timed out!\n", __func__); return NAND_STATUS_FAIL; } - if (unlikely(timeo < 50)) - dev_warn(doc->dev, "%s: nearly timed out; %d remaining\n", - __func__, timeo); - return 0; } -- cgit v1.2.3 From 39ac9ca336314b39df1488087c05a8214266869c Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 11 Oct 2013 12:40:21 +0800 Subject: mtg: docg3: use free_bch() instead of kfree() Use free_bch() instead of kfree() to free init_bch() allocated data. Signed-off-by: Wei Yongjun Acked-by: Robert Jarzmik Signed-off-by: Brian Norris --- drivers/mtd/devices/docg3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index 3e1b0a0ef4db..4f091c1a9981 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -2097,7 +2097,7 @@ notfound: ret = -ENODEV; dev_info(dev, "No supported DiskOnChip found\n"); err_probe: - kfree(cascade->bch); + free_bch(cascade->bch); for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) if (cascade->floors[floor]) doc_release_device(cascade->floors[floor]); -- cgit v1.2.3 From 867f770de8127d2e1dd730ce60608dfdac08d863 Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Tue, 15 Oct 2013 11:09:05 +0530 Subject: mtd: m25p80: Add support for Micron N25Q512A memory Micron N25Q512A is a spi flash memory with following features: -64MB size, 1.8V, Mulitple I/O, 4KB Sector erase memory. -Memory is organised as 1024(64KB) main sectors. -Each sector is divided into 256 pages. -Register set/Opcodes are similar to other N25Q family products. Signed-off-by: Priyanka Jain Acked-by: Marek Vasut Signed-off-by: Brian Norris --- drivers/mtd/devices/m25p80.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index fbc8e7308027..8d6c87be9598 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -790,6 +790,7 @@ static const struct spi_device_id m25p_ids[] = { { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) }, { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, + { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) }, /* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, -- cgit v1.2.3 From 95b26563c739d5ed5101318b1bd8895773a3d872 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Fri, 4 Oct 2013 15:30:37 -0300 Subject: mtd: nand: pxa3xx: Move DMA I/O enabling Instead of setting info->dma each time a command is prepared, we can move it after the DMA buffers are allocated. This is more clear and it's the proper place to enable this, given DMA cannot be turned on and off during runtime. Signed-off-by: Ezequiel Garcia Tested-by: Daniel Mack Signed-off-by: Brian Norris --- drivers/mtd/nand/pxa3xx_nand.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index e08c3c058904..287997487b95 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -540,7 +540,6 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, info->oob_size = 0; info->use_ecc = 0; info->use_spare = 1; - info->use_dma = (use_dma) ? 1 : 0; info->is_ready = 0; info->retcode = ERR_NONE; if (info->cs != 0) @@ -950,6 +949,11 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) return info->data_dma_ch; } + /* + * Now that DMA buffers are allocated we turn on + * DMA proper for I/O operations. + */ + info->use_dma = 1; return 0; } -- cgit v1.2.3 From 62e8b851783138a11da63285be0fbf69530ff73d Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Fri, 4 Oct 2013 15:30:38 -0300 Subject: mtd: nand: pxa3xx: Allocate data buffer on detected flash size This commit replaces the currently hardcoded buffer size, by a dynamic detection scheme. First a small 256 bytes buffer is allocated so the device can be detected (using READID and friends commands). After detection, this buffer is released and a new buffer is allocated to acommodate the page size plus out-of-band size. Signed-off-by: Ezequiel Garcia Tested-by: Daniel Mack Signed-off-by: Brian Norris --- drivers/mtd/nand/pxa3xx_nand.c | 45 ++++++++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 15 deletions(-) diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 287997487b95..64c258ec0170 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -39,6 +39,13 @@ #define NAND_STOP_DELAY (2 * HZ/50) #define PAGE_CHUNK_SIZE (2048) +/* + * Define a buffer size for the initial command that detects the flash device: + * STATUS, READID and PARAM. The largest of these is the PARAM command, + * needing 256 bytes. + */ +#define INIT_BUFFER_SIZE 256 + /* registers and bit definitions */ #define NDCR (0x00) /* Control register */ #define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */ @@ -164,6 +171,7 @@ struct pxa3xx_nand_info { unsigned int buf_start; unsigned int buf_count; + unsigned int buf_size; /* DMA information */ int drcmr_dat; @@ -911,26 +919,20 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info) return 0; } -/* the maximum possible buffer size for large page with OOB data - * is: 2048 + 64 = 2112 bytes, allocate a page here for both the - * data buffer and the DMA descriptor - */ -#define MAX_BUFF_SIZE PAGE_SIZE - #ifdef ARCH_HAS_DMA static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) { struct platform_device *pdev = info->pdev; - int data_desc_offset = MAX_BUFF_SIZE - sizeof(struct pxa_dma_desc); + int data_desc_offset = info->buf_size - sizeof(struct pxa_dma_desc); if (use_dma == 0) { - info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL); + info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); if (info->data_buff == NULL) return -ENOMEM; return 0; } - info->data_buff = dma_alloc_coherent(&pdev->dev, MAX_BUFF_SIZE, + info->data_buff = dma_alloc_coherent(&pdev->dev, info->buf_size, &info->data_buff_phys, GFP_KERNEL); if (info->data_buff == NULL) { dev_err(&pdev->dev, "failed to allocate dma buffer\n"); @@ -944,7 +946,7 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) pxa3xx_nand_data_dma_irq, info); if (info->data_dma_ch < 0) { dev_err(&pdev->dev, "failed to request data dma\n"); - dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE, + dma_free_coherent(&pdev->dev, info->buf_size, info->data_buff, info->data_buff_phys); return info->data_dma_ch; } @@ -962,7 +964,7 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) struct platform_device *pdev = info->pdev; if (use_dma) { pxa_free_dma(info->data_dma_ch); - dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE, + dma_free_coherent(&pdev->dev, info->buf_size, info->data_buff, info->data_buff_phys); } else { kfree(info->data_buff); @@ -971,7 +973,7 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) #else static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) { - info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL); + info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); if (info->data_buff == NULL) return -ENOMEM; return 0; @@ -1085,7 +1087,16 @@ KEEP_CONFIG: else host->col_addr_cycles = 1; + /* release the initial buffer */ + kfree(info->data_buff); + + /* allocate the real data + oob buffer */ + info->buf_size = mtd->writesize + mtd->oobsize; + ret = pxa3xx_nand_init_buff(info); + if (ret) + return ret; info->oob_buff = info->data_buff + mtd->writesize; + if ((mtd->size >> chip->page_shift) > 65536) host->row_addr_cycles = 3; else @@ -1191,9 +1202,13 @@ static int alloc_nand_resource(struct platform_device *pdev) } info->mmio_phys = r->start; - ret = pxa3xx_nand_init_buff(info); - if (ret) + /* Allocate a buffer to allow flash detection */ + info->buf_size = INIT_BUFFER_SIZE; + info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); + if (info->data_buff == NULL) { + ret = -ENOMEM; goto fail_disable_clk; + } /* initialize all interrupts to be disabled */ disable_int(info, NDSR_MASK); @@ -1211,7 +1226,7 @@ static int alloc_nand_resource(struct platform_device *pdev) fail_free_buf: free_irq(irq, info); - pxa3xx_nand_free_buff(info); + kfree(info->data_buff); fail_disable_clk: clk_disable_unprepare(info->clk); return ret; -- cgit v1.2.3 From 4355b70cf48363c50a9de450b01178c83aba8f6a Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 27 Aug 2013 18:45:10 -0700 Subject: mtd: nand: hack ONFI for non-power-of-2 dimensions Some bright specification writers decided to write this in the ONFI spec (from ONFI 3.0, Section 3.1): "The number of blocks and number of pages per block is not required to be a power of two. In the case where one of these values is not a power of two, the corresponding address shall be rounded to an integral number of bits such that it addresses a range up to the subsequent power of two value. The host shall not access upper addresses in a range that is shown as not supported." This breaks every assumption MTD makes about NAND block/chip-size dimensions -- they *must* be a power of two! And of course, an enterprising manufacturer has made use of this lovely freedom. Exhibit A: Micron MT29F32G08CBADAWP "- Plane size: 2 planes x 1064 blocks per plane - Device size: 32Gb: 2128 blockss [sic]" This quickly hits a BUG() in nand_base.c, since the extra dimensions overflow so we think it's a second chip (on my single-chip setup): ONFI param page 0 valid ONFI flash detected NAND device: Manufacturer ID: 0x2c, Chip ID: 0x44 (Micron MT29F32G08CBADAWP), 4256MiB, page size: 8192, OOB size: 744 ------------[ cut here ]------------ kernel BUG at drivers/mtd/nand/nand_base.c:203! Internal error: Oops - BUG: 0 [#1] SMP ARM [... trim ...] [] (nand_select_chip+0x18/0x2c) from [] (nand_do_read_ops+0x90/0x424) [] (nand_do_read_ops+0x90/0x424) from [] (nand_read+0x54/0x78) [] (nand_read+0x54/0x78) from [] (mtd_read+0x84/0xbc) [] (mtd_read+0x84/0xbc) from [] (scan_read.clone.4+0x4c/0x64) [] (scan_read.clone.4+0x4c/0x64) from [] (search_bbt+0x148/0x290) [] (search_bbt+0x148/0x290) from [] (nand_scan_bbt+0xd4/0x5c0) [... trim ...] ---[ end trace 0c9363860d865ff2 ]--- So to fix this, just truncate these dimensions down to the greatest power-of-2 dimension that is less than or equal to the specified dimension. Signed-off-by: Brian Norris Cc: --- drivers/mtd/nand/nand_base.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 848884473229..ec1db1e19c05 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2987,10 +2987,21 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, sanitize_string(p->model, sizeof(p->model)); if (!mtd->name) mtd->name = p->model; + mtd->writesize = le32_to_cpu(p->byte_per_page); - mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize; + + /* + * pages_per_block and blocks_per_lun may not be a power-of-2 size + * (don't ask me who thought of this...). MTD assumes that these + * dimensions will be power-of-2, so just truncate the remaining area. + */ + mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1); + mtd->erasesize *= mtd->writesize; + mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page); - chip->chipsize = le32_to_cpu(p->blocks_per_lun); + + /* See erasesize comment */ + chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1); chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count; chip->bits_per_cell = p->bits_per_cell; -- cgit v1.2.3 From 98a7c7475d2381febb05d139b5db6f49eeda4427 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 11 Oct 2013 10:11:23 +0530 Subject: mtd: plat-ram: Use module_platform_driver module_platform_driver simplifies the code by removing boiler plate. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/maps/plat-ram.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 3e35b9a330c7..10196f5a897d 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -257,21 +257,7 @@ static struct platform_driver platram_driver = { }, }; -/* module init/exit */ - -static int __init platram_init(void) -{ - printk("Generic platform RAM MTD, (c) 2004 Simtec Electronics\n"); - return platform_driver_register(&platram_driver); -} - -static void __exit platram_exit(void) -{ - platform_driver_unregister(&platram_driver); -} - -module_init(platram_init); -module_exit(platram_exit); +module_platform_driver(platram_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ben Dooks "); -- cgit v1.2.3 From 994bbd0e91c0dfa4dcda9097b0716607aeec5470 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 11 Oct 2013 10:11:24 +0530 Subject: mtd: bcm47xxnflash: Use module_platform_driver module_platform_driver simplifies the code by removing boiler plate. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/nand/bcm47xxnflash/main.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) diff --git a/drivers/mtd/nand/bcm47xxnflash/main.c b/drivers/mtd/nand/bcm47xxnflash/main.c index 7bae569fdc79..2dc3aa632f6c 100644 --- a/drivers/mtd/nand/bcm47xxnflash/main.c +++ b/drivers/mtd/nand/bcm47xxnflash/main.c @@ -85,22 +85,4 @@ static struct platform_driver bcm47xxnflash_driver = { }, }; -static int __init bcm47xxnflash_init(void) -{ - int err; - - err = platform_driver_register(&bcm47xxnflash_driver); - if (err) - pr_err("Failed to register bcm47xx nand flash driver: %d\n", - err); - - return err; -} - -static void __exit bcm47xxnflash_exit(void) -{ - platform_driver_unregister(&bcm47xxnflash_driver); -} - -module_init(bcm47xxnflash_init); -module_exit(bcm47xxnflash_exit); +module_platform_driver(bcm47xxnflash_driver); -- cgit v1.2.3 From 7e3019e364f1b6b9ce123e747addcdc96e8d74ae Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 11 Oct 2013 10:11:25 +0530 Subject: mtd: bcm47xxnflash: Use devm_kzalloc devm_kzalloc is device managed and simplifies the code. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/nand/bcm47xxnflash/main.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/drivers/mtd/nand/bcm47xxnflash/main.c b/drivers/mtd/nand/bcm47xxnflash/main.c index 2dc3aa632f6c..107445911315 100644 --- a/drivers/mtd/nand/bcm47xxnflash/main.c +++ b/drivers/mtd/nand/bcm47xxnflash/main.c @@ -29,11 +29,9 @@ static int bcm47xxnflash_probe(struct platform_device *pdev) struct bcm47xxnflash *b47n; int err = 0; - b47n = kzalloc(sizeof(*b47n), GFP_KERNEL); - if (!b47n) { - err = -ENOMEM; - goto out; - } + b47n = devm_kzalloc(&pdev->dev, sizeof(*b47n), GFP_KERNEL); + if (!b47n) + return -ENOMEM; b47n->nand_chip.priv = b47n; b47n->mtd.owner = THIS_MODULE; @@ -48,22 +46,16 @@ static int bcm47xxnflash_probe(struct platform_device *pdev) } if (err) { pr_err("Initialization failed: %d\n", err); - goto err_init; + return err; } err = mtd_device_parse_register(&b47n->mtd, probes, NULL, NULL, 0); if (err) { pr_err("Failed to register MTD device: %d\n", err); - goto err_dev_reg; + return err; } return 0; - -err_dev_reg: -err_init: - kfree(b47n); -out: - return err; } static int bcm47xxnflash_remove(struct platform_device *pdev) -- cgit v1.2.3 From 99b1d1887fee36ef9ff5d2ee24f0cf3e8c172104 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 13 Oct 2013 22:53:49 +0200 Subject: mtd: bcm47xxpart: handle malloc failures Handle return NULL in malloc. Signed-off-by: Hauke Mehrtens Signed-off-by: Brian Norris --- drivers/mtd/bcm47xxpart.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c index 9279a9174f84..6d427468c4cd 100644 --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c @@ -71,7 +71,14 @@ static int bcm47xxpart_parse(struct mtd_info *master, /* Alloc */ parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS, GFP_KERNEL); + if (!parts) + return -ENOMEM; + buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL); + if (!buf) { + kfree(parts); + return -ENOMEM; + } /* Parse block by block looking for magics */ for (offset = 0; offset <= master->size - blocksize; -- cgit v1.2.3 From 020c6bcfbeabee72c18d862769d72cf9241b9004 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Mon, 21 Oct 2013 22:34:37 +0200 Subject: mtd: bcm47xxpart: detect block aligned Squashfs partition Most of the bcm47xx devices use TRX format for storing kernel and some partition like Squashfs or JFFS2. This is pretty flexible solution, CFE (the bootloader) just writes (and later boots) TRX at some hardcoded place and paritions can vary in the size. However some devices don't use TRX format. Very recently we have discovered ZTE H218N that has kernel and rootfs partitions at some "random" places. This patch allows Linux find a rootfs partition after installing custom image with a CFE bootloader. Signed-off-by: Rafał Miłecki Signed-off-by: Brian Norris --- drivers/mtd/bcm47xxpart.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c index 6d427468c4cd..a737450826ec 100644 --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c @@ -32,6 +32,7 @@ #define ML_MAGIC1 0x39685a42 #define ML_MAGIC2 0x26594131 #define TRX_MAGIC 0x30524448 +#define SQSH_MAGIC 0x71736873 /* shsq */ struct trx_header { uint32_t magic; @@ -174,6 +175,13 @@ static int bcm47xxpart_parse(struct mtd_info *master, offset = rounddown(offset + trx->length, blocksize); continue; } + + /* Squashfs on devices not using TRX */ + if (buf[0x000 / 4] == SQSH_MAGIC) { + bcm47xxpart_add_part(&parts[curr_part++], "rootfs", + offset, 0); + continue; + } } /* Look for NVRAM at the end of the last block. */ -- cgit v1.2.3 From 33094c736cd36a6cecadae6bce4daba89dabc326 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Mon, 21 Oct 2013 22:35:34 +0200 Subject: mtd: bcm47xxpart: detect "factory" partition A new type of partition with magic FCTY was found on Huawei E970: 46 43 54 59 4b 51 37 4e 41 42 31 38 41 32 39 30 |FCTYKQ7NAB18A290| Signed-off-by: Rafał Miłecki Signed-off-by: Brian Norris --- drivers/mtd/bcm47xxpart.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c index a737450826ec..7a6384b0962a 100644 --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c @@ -27,6 +27,7 @@ /* Magics */ #define BOARD_DATA_MAGIC 0x5246504D /* MPFR */ +#define FACTORY_MAGIC 0x59544346 /* FCTY */ #define POT_MAGIC1 0x54544f50 /* POTT */ #define POT_MAGIC2 0x504f /* OP */ #define ML_MAGIC1 0x39685a42 @@ -118,6 +119,13 @@ static int bcm47xxpart_parse(struct mtd_info *master, continue; } + /* Found on Huawei E970 */ + if (buf[0x000 / 4] == FACTORY_MAGIC) { + bcm47xxpart_add_part(&parts[curr_part++], "factory", + offset, MTD_WRITEABLE); + continue; + } + /* POT(TOP) */ if (buf[0x000 / 4] == POT_MAGIC1 && (buf[0x004 / 4] & 0xFFFF) == POT_MAGIC2) { -- cgit v1.2.3 From f83c3838b9146b891d0405d3a83660e8f6aed02f Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Sun, 13 Oct 2013 18:05:23 -0300 Subject: mtd: Move major number definitions to major.h This patch moves the char and block major number definitions to major.h to be with the rest of the major numbers. While doing this, include major.h in the files that need it. Signed-off-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/devices/block2mtd.c | 1 + drivers/mtd/mtdblock.c | 1 + drivers/mtd/mtdblock_ro.c | 1 + drivers/mtd/mtdchar.c | 1 + drivers/mtd/mtdcore.c | 1 + drivers/mtd/mtdsuper.c | 1 + drivers/mtd/ubi/build.c | 1 + include/linux/mtd/mtd.h | 3 --- include/uapi/linux/major.h | 2 ++ 9 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index 5cb4c04726b2..d9fd87a4c8dc 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -20,6 +20,7 @@ #include #include #include +#include /* Info for the block device */ struct block2mtd_dev { diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index 53884cc25916..485ea751c7f9 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -32,6 +32,7 @@ #include #include #include +#include struct mtdblk_dev { diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c index 70d27b4d632b..fb5dc89369de 100644 --- a/drivers/mtd/mtdblock_ro.c +++ b/drivers/mtd/mtdblock_ro.c @@ -24,6 +24,7 @@ #include #include #include +#include static int mtdblock_readsect(struct mtd_blktrans_dev *dev, unsigned long block, char *buf) diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 684bfa39e4ee..9aa0c5e49c1d 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 92311a56939f..7189089d87e3 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c index 334da5f583c0..20c02a3b7417 100644 --- a/drivers/mtd/mtdsuper.c +++ b/drivers/mtd/mtdsuper.c @@ -17,6 +17,7 @@ #include #include #include +#include /* * compare superblocks to see if they're equivalent diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 315dcc6ec1f5..e05dc6298c1d 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "ubi.h" /* Maximum length of the 'mtd=' parameter */ diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 88409b813418..8cc0e2fb6894 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -29,9 +29,6 @@ #include -#define MTD_CHAR_MAJOR 90 -#define MTD_BLOCK_MAJOR 31 - #define MTD_ERASE_PENDING 0x01 #define MTD_ERASING 0x02 #define MTD_ERASE_SUSPEND 0x04 diff --git a/include/uapi/linux/major.h b/include/uapi/linux/major.h index 6a8ca98c9a96..620252e69b44 100644 --- a/include/uapi/linux/major.h +++ b/include/uapi/linux/major.h @@ -54,6 +54,7 @@ #define ACSI_MAJOR 28 #define AZTECH_CDROM_MAJOR 29 #define FB_MAJOR 29 /* /dev/fb* framebuffers */ +#define MTD_BLOCK_MAJOR 31 #define CM206_CDROM_MAJOR 32 #define IDE2_MAJOR 33 #define IDE3_MAJOR 34 @@ -105,6 +106,7 @@ #define IDE6_MAJOR 88 #define IDE7_MAJOR 89 #define IDE8_MAJOR 90 +#define MTD_CHAR_MAJOR 90 #define IDE9_MAJOR 91 #define DASD_MAJOR 94 -- cgit v1.2.3 From a4d62babf988fe5dfde24437fa135ef147bc7aa0 Mon Sep 17 00:00:00 2001 From: Wang Haitao Date: Thu, 22 Aug 2013 19:32:38 +0800 Subject: mtd: map: fixed bug in 64-bit systems Hardware: CPU: XLP832,the 64-bit OS NOR Flash:S29GL128S 128M Software: Kernel:2.6.32.41 Filesystem:JFFS2 When writing files, errors appear: Write len 182 but return retlen 180 Write of 182 bytes at 0x072c815c failed. returned -5, retlen 180 Write len 186 but return retlen 184 Write of 186 bytes at 0x072caff4 failed. returned -5, retlen 184 These errors exist only in 64-bit systems,not in 32-bit systems. After analysis, we found that the left shift operation is wrong in map_word_load_partial. For instance: unsigned char buf[3] ={0x9e,0x3a,0xea}; map_bankwidth(map) is 4; for (i=0; i < 3; i++) { int bitpos; bitpos = (map_bankwidth(map)-1-i)*8; orig.x[0] &= ~(0xff << bitpos); orig.x[0] |= buf[i] << bitpos; } The value of orig.x[0] is expected to be 0x9e3aeaff, but in this situation(64-bit System) we'll get the wrong value of 0xffffffff9e3aeaff due to the 64-bit sign extension: buf[i] is defined as "unsigned char" and the left-shift operation will convert it to the type of "signed int", so when left-shift buf[i] by 24 bits, the final result will get the wrong value: 0xffffffff9e3aeaff. If the left-shift bits are less than 24, then sign extension will not occur. Whereas the bankwidth of the nor flash we used is 4, therefore this BUG emerges. Signed-off-by: Pang Xunlei Signed-off-by: Zhang Yi Signed-off-by: Lu Zhongjun Cc: Signed-off-by: Brian Norris --- include/linux/mtd/map.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index 4b02512e421c..5f487d776411 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -365,7 +365,7 @@ static inline map_word map_word_load_partial(struct map_info *map, map_word orig bitpos = (map_bankwidth(map)-1-i)*8; #endif orig.x[0] &= ~(0xff << bitpos); - orig.x[0] |= buf[i-start] << bitpos; + orig.x[0] |= (unsigned long)buf[i-start] << bitpos; } } return orig; @@ -384,7 +384,7 @@ static inline map_word map_word_ff(struct map_info *map) if (map_bankwidth(map) < MAP_FF_LIMIT) { int bw = 8 * map_bankwidth(map); - r.x[0] = (1 << bw) - 1; + r.x[0] = (1UL << bw) - 1; } else { for (i=0; i Signed-off-by: Brian Norris --- arch/powerpc/include/asm/fsl_ifc.h | 2 + drivers/mtd/nand/fsl_ifc_nand.c | 77 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 79 insertions(+) diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h index b8a4b9bc50b3..f49ddb1b2273 100644 --- a/arch/powerpc/include/asm/fsl_ifc.h +++ b/arch/powerpc/include/asm/fsl_ifc.h @@ -93,6 +93,7 @@ #define CSOR_NAND_PGS_512 0x00000000 #define CSOR_NAND_PGS_2K 0x00080000 #define CSOR_NAND_PGS_4K 0x00100000 +#define CSOR_NAND_PGS_8K 0x00180000 /* Spare region Size */ #define CSOR_NAND_SPRZ_MASK 0x0000E000 #define CSOR_NAND_SPRZ_SHIFT 13 @@ -102,6 +103,7 @@ #define CSOR_NAND_SPRZ_210 0x00006000 #define CSOR_NAND_SPRZ_218 0x00008000 #define CSOR_NAND_SPRZ_224 0x0000A000 +#define CSOR_NAND_SPRZ_CSOR_EXT 0x0000C000 /* Pages Per Block */ #define CSOR_NAND_PB_MASK 0x00000700 #define CSOR_NAND_PB_SHIFT 8 diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 1c173d91cbea..9d1cf005878f 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -135,6 +135,69 @@ static struct nand_ecclayout oob_4096_ecc8 = { .oobfree = { {2, 6}, {136, 82} }, }; +/* 8192-byte page size with 4-bit ECC */ +static struct nand_ecclayout oob_8192_ecc4 = { + .eccbytes = 128, + .eccpos = { + 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, + 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 130, 131, 132, 133, 134, 135, + }, + .oobfree = { {2, 6}, {136, 208} }, +}; + +/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */ +static struct nand_ecclayout oob_8192_ecc8 = { + .eccbytes = 256, + .eccpos = { + 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, + 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 130, 131, 132, 133, 134, 135, + 136, 137, 138, 139, 140, 141, 142, 143, + 144, 145, 146, 147, 148, 149, 150, 151, + 152, 153, 154, 155, 156, 157, 158, 159, + 160, 161, 162, 163, 164, 165, 166, 167, + 168, 169, 170, 171, 172, 173, 174, 175, + 176, 177, 178, 179, 180, 181, 182, 183, + 184, 185, 186, 187, 188, 189, 190, 191, + 192, 193, 194, 195, 196, 197, 198, 199, + 200, 201, 202, 203, 204, 205, 206, 207, + 208, 209, 210, 211, 212, 213, 214, 215, + 216, 217, 218, 219, 220, 221, 222, 223, + 224, 225, 226, 227, 228, 229, 230, 231, + 232, 233, 234, 235, 236, 237, 238, 239, + 240, 241, 242, 243, 244, 245, 246, 247, + 248, 249, 250, 251, 252, 253, 254, 255, + 256, 257, 258, 259, 260, 261, 262, 263, + }, + .oobfree = { {2, 6}, {264, 80} }, +}; /* * Generic flash bbt descriptors @@ -870,11 +933,25 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) } else { layout = &oob_4096_ecc8; chip->ecc.bytes = 16; + chip->ecc.strength = 8; } priv->bufnum_mask = 1; break; + case CSOR_NAND_PGS_8K: + if ((csor & CSOR_NAND_ECC_MODE_MASK) == + CSOR_NAND_ECC_MODE_4) { + layout = &oob_8192_ecc4; + } else { + layout = &oob_8192_ecc8; + chip->ecc.bytes = 16; + chip->ecc.strength = 8; + } + + priv->bufnum_mask = 0; + break; + default: dev_err(priv->dev, "bad csor %#x: bad page size\n", csor); return -ENODEV; -- cgit v1.2.3 From 4af9874916b14db407bee18590fe1847f541c2e2 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Thu, 3 Oct 2013 11:36:41 +0530 Subject: driver/mtd/ifc: Read Status while programming NAND flash as per controller description, "While programming a NAND flash, status read should never skipped. Because it may happen that a new command is issued to the NAND Flash, even when the device has not yet finished processing the previous request. This may result in unpredictable behaviour." IFC controller never polls for R/B signal after command send. It just return control to software. This behaviour may not occur with NAND flash access. because new commands are sent after polling R/B signal. But it may happen in scenario where GPCM-ASIC and NAND flash device are working simultaneously. Update the controller driver to take care of this requirement Signed-off-by: Prabhakar Kushwaha Signed-off-by: Brian Norris --- drivers/mtd/nand/fsl_ifc_nand.c | 34 ++++++++++++++++++++++++---------- 1 file changed, 24 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 9d1cf005878f..c96e1e0943f5 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -504,20 +504,29 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, if (mtd->writesize > 512) { nand_fcr0 = (NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT); + (NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) | + (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT); iowrite32be( - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT), - &ifc->ifc_nand.nand_fir0); + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT), + &ifc->ifc_nand.nand_fir0); + iowrite32be( + (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) | + (IFC_FIR_OP_RDSTAT << + IFC_NAND_FIR1_OP6_SHIFT) | + (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT), + &ifc->ifc_nand.nand_fir1); } else { nand_fcr0 = ((NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT) | (NAND_CMD_SEQIN << - IFC_NAND_FCR0_CMD2_SHIFT)); + IFC_NAND_FCR0_CMD2_SHIFT) | + (NAND_CMD_STATUS << + IFC_NAND_FCR0_CMD3_SHIFT)); iowrite32be( (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | @@ -526,8 +535,13 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) | (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT), &ifc->ifc_nand.nand_fir0); - iowrite32be(IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT, - &ifc->ifc_nand.nand_fir1); + iowrite32be( + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) | + (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) | + (IFC_FIR_OP_RDSTAT << + IFC_NAND_FIR1_OP7_SHIFT) | + (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT), + &ifc->ifc_nand.nand_fir1); if (column >= mtd->writesize) nand_fcr0 |= -- cgit v1.2.3 From d159d8b7074181b154643aa15347d65a36b7ab59 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Tue, 27 Aug 2013 17:29:04 +0800 Subject: mtd: gpmi: decouple the chip select from the DMA channel Decouple the chip select from the DMA channel, we use the DMA channel 0 to accecc all the nand devices. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 6 ++++++ drivers/mtd/nand/gpmi-nand/gpmi-regs.h | 3 +++ 2 files changed, 9 insertions(+) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 4f8857fa48a7..7d56d87599c0 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -187,6 +187,12 @@ int gpmi_init(struct gpmi_nand_data *this) /* Select BCH ECC. */ writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET); + /* + * Decouple the chip select from dma channel. We use dma0 for all + * the chips. + */ + writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET); + gpmi_disable_clk(this); return 0; err_out: diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h index 53397cc290fc..82114cdc8330 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h @@ -108,6 +108,9 @@ #define HW_GPMI_CTRL1_CLR 0x00000068 #define HW_GPMI_CTRL1_TOG 0x0000006c +#define BP_GPMI_CTRL1_DECOUPLE_CS 24 +#define BM_GPMI_CTRL1_DECOUPLE_CS (1 << BP_GPMI_CTRL1_DECOUPLE_CS) + #define BP_GPMI_CTRL1_WRN_DLY_SEL 22 #define BM_GPMI_CTRL1_WRN_DLY_SEL (0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL) #define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \ -- cgit v1.2.3 From a7c12d016aa50762e4816308f46e2572ff9b5a01 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Tue, 27 Aug 2013 17:29:05 +0800 Subject: mtd: gpmi: use DMA channel 0 for all the nand chips We only have one DMA channel : the channel 0. Use DMA channel 0 to access all the nand chips. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 37508eb350d0..a5c60c4a62b5 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -357,9 +357,8 @@ int common_nfc_set_geometry(struct gpmi_nand_data *this) struct dma_chan *get_dma_chan(struct gpmi_nand_data *this) { - int chipnr = this->current_chip; - - return this->dma_chans[chipnr]; + /* We use the DMA channel 0 to access all the nand chips. */ + return this->dma_chans[0]; } /* Can we use the upper's buffer directly for DMA? */ -- cgit v1.2.3 From a5370e9ed567e68ac261b28a242832eb09fe8559 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Tue, 27 Aug 2013 17:29:06 +0800 Subject: mtd: gpmi: scan two nand chips Some nand chip has two DIEs in a single chip, such as Micron MT29F32G08QAA. Each die has its own chip select pin, so this chip acts as two nand chips. If we only scan one chip, we may find that we only get 2G for this chip, but in actually, this chip's size is 4G. So scan two chips by default. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index a5c60c4a62b5..7ac22802e4dc 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1674,7 +1674,7 @@ static int gpmi_nfc_init(struct gpmi_nand_data *this) if (ret) goto err_out; - ret = nand_scan_ident(mtd, 1, NULL); + ret = nand_scan_ident(mtd, 2, NULL); if (ret) goto err_out; -- cgit v1.2.3 From 7caa4fd29068cccaa7be20914af6d23f261be3eb Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Tue, 27 Aug 2013 17:29:07 +0800 Subject: mtd: gpmi: imx6: fix the wrong method for checking ready/busy In the imx6, all the ready/busy pins are binding togeter. So we should always check the ready/busy pin of the chip 0. In the other word, when the CS1 is enabled, we should also check the ready/busy of chip 0; if we check the ready/busy of chip 1, we will get the wrong result. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 7d56d87599c0..aaced29727fb 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -1079,6 +1079,13 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip) mask = MX23_BM_GPMI_DEBUG_READY0 << chip; reg = readl(r->gpmi_regs + HW_GPMI_DEBUG); } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6Q(this)) { + /* + * In the imx6, all the ready/busy pins are bound + * together. So we only need to check chip 0. + */ + if (GPMI_IS_MX6Q(this)) + chip = 0; + /* MX28 shares the same R/B register as MX6Q. */ mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip); reg = readl(r->gpmi_regs + HW_GPMI_STAT); -- cgit v1.2.3 From 778d226a1462572b51d6777cdb1d611543410cb4 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 24 Jul 2013 18:32:07 -0700 Subject: mtd: m25p80: fix allocation size This patch fixes two memory errors: 1. During a probe failure (in mtd_device_parse_register?) the command buffer would not be freed. 2. The command buffer's size is determined based on the 'fast_read' boolean, but the assignment of fast_read is made after this allocation. Thus, the buffer may be allocated "too small". To fix the first, just switch to the devres version of kzalloc. To fix the second, increase MAX_CMD_SIZE unconditionally. It's not worth saving a byte to fiddle around with the conditions here. This problem was reported by Yuhang Wang a while back. Signed-off-by: Brian Norris Reported-by: Yuhang Wang Reviewed-by: Sourav Poddar Cc: --- drivers/mtd/devices/m25p80.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 8d6c87be9598..63a95ac89f18 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -78,7 +78,7 @@ /* Define max times to check status register before we give up. */ #define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ -#define MAX_CMD_SIZE 5 +#define MAX_CMD_SIZE 6 #define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16) @@ -996,15 +996,13 @@ static int m25p_probe(struct spi_device *spi) } } - flash = kzalloc(sizeof *flash, GFP_KERNEL); + flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); if (!flash) return -ENOMEM; - flash->command = kmalloc(MAX_CMD_SIZE + (flash->fast_read ? 1 : 0), - GFP_KERNEL); - if (!flash->command) { - kfree(flash); + + flash->command = devm_kzalloc(&spi->dev, MAX_CMD_SIZE, GFP_KERNEL); + if (!flash->command) return -ENOMEM; - } flash->spi = spi; mutex_init(&flash->lock); @@ -1137,14 +1135,10 @@ static int m25p_probe(struct spi_device *spi) static int m25p_remove(struct spi_device *spi) { struct m25p *flash = spi_get_drvdata(spi); - int status; /* Clean up MTD stuff. */ - status = mtd_device_unregister(&flash->mtd); - if (status == 0) { - kfree(flash->command); - kfree(flash); - } + mtd_device_unregister(&flash->mtd); + return 0; } -- cgit v1.2.3 From 1a874e91018ea99d7f012a0824669aa9ed833d6f Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 29 Jul 2013 23:57:57 -0700 Subject: mtd: m25p80: remove obsolete FIXME The FIXME and NOTE have already been fixed (we have FAST_READ support). Signed-off-by: Brian Norris Reviewed-by: Sourav Poddar Acked-by: Marek Vasut --- drivers/mtd/devices/m25p80.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 63a95ac89f18..7c4cbad2e981 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -367,10 +367,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, spi_message_init(&m); memset(t, 0, (sizeof t)); - /* NOTE: - * OPCODE_FAST_READ (if available) is faster. - * Should add 1 byte DUMMY_BYTE. - */ t[0].tx_buf = flash->command; t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0); spi_message_add_tail(&t[0], &m); @@ -388,11 +384,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, return 1; } - /* FIXME switch to OPCODE_FAST_READ. It's required for higher - * clocks; and at this writing, every chip this driver handles - * supports that opcode. - */ - /* Set up the write data buffer. */ opcode = flash->read_opcode; flash->command[0] = opcode; -- cgit v1.2.3 From 6e5d9bda27000c682a9b38f0466941007e295f82 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 9 Aug 2013 19:41:13 -0700 Subject: mtd: m25p80: re-align ID entries No change in the table data. Signed-off-by: Brian Norris Reviewed-by: Sourav Poddar --- drivers/mtd/devices/m25p80.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 7c4cbad2e981..7e3ec7ae727f 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -740,19 +740,19 @@ static const struct spi_device_id m25p_ids[] = { { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) }, /* EON -- en25xxx */ - { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) }, - { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) }, - { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, - { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, - { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, - { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) }, + { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) }, + { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) }, + { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, + { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, + { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, + { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) }, /* ESMT */ { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) }, /* Everspin */ - { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) }, - { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, M25P_NO_ERASE | M25P_NO_FR) }, + { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) }, + { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, M25P_NO_ERASE | M25P_NO_FR) }, /* GigaDevice */ { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) }, @@ -777,16 +777,16 @@ static const struct spi_device_id m25p_ids[] = { { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, 0) }, /* Micron */ - { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) }, - { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) }, - { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, - { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, - { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) }, + { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) }, + { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) }, + { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, + { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, + { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) }, /* PMC */ - { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, - { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) }, - { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) }, + { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, + { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) }, + { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) }, /* Spansion -- single (large) sector size only, at least * for the chips listed here (without boot sectors). -- cgit v1.2.3 From ddba7c5ad797f4b878f4e177ef300c1f9837cd29 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 19 Aug 2013 21:30:22 -0700 Subject: mtd: m25p80: remove M25PXX_USE_FAST_READ Kconfig Remove the compile-time option for FAST_READ, since we have run-time support for detecting it. This refactors the logic for enabling fast-read, such that for DT-enabled devices, we honor the "m25p,fast-read" property but for non-DT devices, we default to using FAST_READ whenever the flash device supports it. Normal READ and FAST_READ differ only in the following: * FAST_READ supports SPI higher clock frequencies [1] * number of dummy cycles; FAST_READ requires 8 dummy cycles (whereas READ requires 0) to allow the flash sufficient setup time, even when running at higher clock speeds Thus, for flash chips which support FAST_READ, there is otherwise no limiting reason why we cannot use the FAST_READ opcode instead of READ. It simply allows the SPI controller to run at higher clock rates. So theoretically, nobody should be needing the compile-time option anyway. [1] I have a Spansion S25FL128S datasheet which says: "The maximum operating clock frequency for the READ command is 50 MHz." And: "The maximum operating clock frequency for FAST READ command is 133 MHz." Signed-off-by: Brian Norris --- drivers/mtd/devices/Kconfig | 7 ------- drivers/mtd/devices/m25p80.c | 11 ++++++----- 2 files changed, 6 insertions(+), 12 deletions(-) diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 74ab4b7e523e..01281382180b 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -95,13 +95,6 @@ config MTD_M25P80 if you want to specify device partitioning or to use a device which doesn't support the JEDEC ID instruction. -config M25PXX_USE_FAST_READ - bool "Use FAST_READ OPCode allowing SPI CLK >= 50MHz" - depends on MTD_M25P80 - default y - help - This option enables FAST_READ access supported by ST M25Pxx. - config MTD_SPEAR_SMI tristate "SPEAR MTD NOR Support through SMI controller" depends on PLAT_SPEAR diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 7e3ec7ae727f..d6c5c57380f8 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -1055,13 +1055,14 @@ static int m25p_probe(struct spi_device *spi) flash->page_size = info->page_size; flash->mtd.writebufsize = flash->page_size; - flash->fast_read = false; - if (np && of_property_read_bool(np, "m25p,fast-read")) + if (np) + /* If we were instantiated by DT, use it */ + flash->fast_read = of_property_read_bool(np, "m25p,fast-read"); + else + /* If we weren't instantiated by DT, default to fast-read */ flash->fast_read = true; -#ifdef CONFIG_M25PXX_USE_FAST_READ - flash->fast_read = true; -#endif + /* Some devices cannot do fast-read, no matter what DT tells us */ if (info->flags & M25P_NO_FR) flash->fast_read = false; -- cgit v1.2.3 From dc525ff4705cee2291b1637a650489aca86ac937 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 23 Oct 2013 19:34:46 -0700 Subject: mtd: m25p80: remove 'disabled' device check It seems like the following commit was never necessary commit 5f949137952020214cd167093dd7be448f21c079 Author: Shaohui Xie Date: Fri Oct 14 15:49:00 2011 +0800 mtd: m25p80: don't probe device which has status of 'disabled' because it duplicates the code in of_platform_device_create_pdata() which ensures that 'disabled' nodes are never instantiated. Also, drop the __maybe_unused. Signed-off-by: Brian Norris Reviewed-by: Sourav Poddar Reviewed-by: Grant Likely Cc: Rob Herring Cc: --- drivers/mtd/devices/m25p80.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index d6c5c57380f8..a1dc49a6f84f 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -935,12 +935,7 @@ static int m25p_probe(struct spi_device *spi) struct flash_info *info; unsigned i; struct mtd_part_parser_data ppdata; - struct device_node __maybe_unused *np = spi->dev.of_node; - -#ifdef CONFIG_MTD_OF_PARTS - if (!of_device_is_available(np)) - return -ENODEV; -#endif + struct device_node *np = spi->dev.of_node; /* Platform data helps sort out which chip type we have, as * well as how this board partitions it. If we don't have -- cgit v1.2.3 From ac65caf514ec3e55e8d3d510ee37f80dd97418fe Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:17 +0530 Subject: ARM: OMAP2+: cleaned-up DT support of various ECC schemes OMAP NAND driver support multiple ECC scheme, which can used in different flavours, depending on in-build Hardware engines present on SoC. This patch updates following in DT bindings related to sectionion of ecc-schemes - ti,elm-id: replaces elm_id (maintains backward compatibility) - ti,nand-ecc-opts: selection of h/w or s/w implementation of an ecc-scheme depends on ti,elm-id. (supported values ham1, bch4, and bch8) - maintain backward compatibility to deprecated DT bindings (sw, hw, hw-romcode) Below table shows different flavours of ecc-schemes supported by OMAP devices +---------------------------------------+---------------+---------------+ | ECC scheme |ECC calculation|Error detection| +---------------------------------------+---------------+---------------+ |OMAP_ECC_HAM1_CODE_HW |H/W (GPMC) |S/W | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W | |(requires CONFIG_MTD_NAND_ECC_BCH) | | | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW |H/W (GPMC) |H/W (ELM) | |(requires CONFIG_MTD_NAND_OMAP_BCH && | | | | ti,elm-id in DT) | | | +---------------------------------------+---------------+---------------+ To optimize footprint of omap2-nand driver, selection of some ECC schemes also require enabling following Kconfigs, in addition to setting appropriate DT bindings - Kconfig:CONFIG_MTD_NAND_ECC_BCH error detection done in software - Kconfig:CONFIG_MTD_NAND_OMAP_BCH error detection done by h/w engine Signed-off-by: Pekon Gupta Reviewed-by: Felipe Balbi Acked-by: Tony Lindgren Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- .../devicetree/bindings/mtd/gpmc-nand.txt | 8 +++- arch/arm/mach-omap2/gpmc.c | 48 +++++++++++++++------- include/linux/platform_data/mtd-nand-omap2.h | 13 +++++- 3 files changed, 51 insertions(+), 18 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index df338cb5059c..bfe07e152738 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -36,8 +36,12 @@ Optional properties: "prefetch-dma" Prefetch enabled sDMA mode "prefetch-irq" Prefetch enabled irq mode - - elm_id: Specifies elm device node. This is required to support BCH - error correction using ELM module. + - elm_id: use "ti,elm-id" instead + - ti,elm-id: Specifies phandle of the ELM devicetree node. + ELM is an on-chip hardware engine on TI SoC which is used for + locating ECC errors for BCHx algorithms. SoC devices which have + ELM hardware engines should specify this device node in .dtsi + Using ELM for ECC error correction frees some CPU cycles. For inline partiton table parsing (optional): diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 579697adaae7..c877129142ba 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1341,14 +1341,6 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np, #ifdef CONFIG_MTD_NAND -static const char * const nand_ecc_opts[] = { - [OMAP_ECC_HAMMING_CODE_DEFAULT] = "sw", - [OMAP_ECC_HAMMING_CODE_HW] = "hw", - [OMAP_ECC_HAMMING_CODE_HW_ROMCODE] = "hw-romcode", - [OMAP_ECC_BCH4_CODE_HW] = "bch4", - [OMAP_ECC_BCH8_CODE_HW] = "bch8", -}; - static const char * const nand_xfer_types[] = { [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled", [NAND_OMAP_POLLED] = "polled", @@ -1378,13 +1370,41 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, gpmc_nand_data->cs = val; gpmc_nand_data->of_node = child; - if (!of_property_read_string(child, "ti,nand-ecc-opt", &s)) - for (val = 0; val < ARRAY_SIZE(nand_ecc_opts); val++) - if (!strcasecmp(s, nand_ecc_opts[val])) { - gpmc_nand_data->ecc_opt = val; - break; - } + /* Detect availability of ELM module */ + gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0); + if (gpmc_nand_data->elm_of_node == NULL) + gpmc_nand_data->elm_of_node = + of_parse_phandle(child, "elm_id", 0); + if (gpmc_nand_data->elm_of_node == NULL) + pr_warn("%s: ti,elm-id property not found\n", __func__); + + /* select ecc-scheme for NAND */ + if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) { + pr_err("%s: ti,nand-ecc-opt not found\n", __func__); + return -ENODEV; + } + if (!strcmp(s, "ham1") || !strcmp(s, "sw") || + !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) + gpmc_nand_data->ecc_opt = + OMAP_ECC_HAM1_CODE_HW; + else if (!strcmp(s, "bch4")) + if (gpmc_nand_data->elm_of_node) + gpmc_nand_data->ecc_opt = + OMAP_ECC_BCH4_CODE_HW; + else + gpmc_nand_data->ecc_opt = + OMAP_ECC_BCH4_CODE_HW_DETECTION_SW; + else if (!strcmp(s, "bch8")) + if (gpmc_nand_data->elm_of_node) + gpmc_nand_data->ecc_opt = + OMAP_ECC_BCH8_CODE_HW; + else + gpmc_nand_data->ecc_opt = + OMAP_ECC_BCH8_CODE_HW_DETECTION_SW; + else + pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__); + /* select data transfer mode for NAND controller */ if (!of_property_read_string(child, "ti,nand-xfer-type", &s)) for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++) if (!strcasecmp(s, nand_xfer_types[val])) { diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 6bf9ef43ddb1..e4128f1510bf 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -28,8 +28,16 @@ enum omap_ecc { OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ /* 1-bit ecc: stored at beginning of spare area as romcode */ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ - OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */ - OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */ + /* 1-bit ECC calculation by GPMC, Error detection by Software */ + OMAP_ECC_HAM1_CODE_HW, + /* 4-bit ECC calculation by GPMC, Error detection by Software */ + OMAP_ECC_BCH4_CODE_HW_DETECTION_SW, + /* 4-bit ECC calculation by GPMC, Error detection by ELM */ + OMAP_ECC_BCH4_CODE_HW, + /* 8-bit ECC calculation by GPMC, Error detection by Software */ + OMAP_ECC_BCH8_CODE_HW_DETECTION_SW, + /* 8-bit ECC calculation by GPMC, Error detection by ELM */ + OMAP_ECC_BCH8_CODE_HW, }; struct gpmc_nand_regs { @@ -63,5 +71,6 @@ struct omap_nand_platform_data { /* for passing the partitions */ struct device_node *of_node; + struct device_node *elm_of_node; }; #endif -- cgit v1.2.3 From c66d039197e42af8867e5d0d9b904daf0fb9e6bc Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:18 +0530 Subject: mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes OMAP NAND driver currently supports multiple flavours of 1-bit Hamming ecc-scheme, like: - OMAP_ECC_HAMMING_CODE_DEFAULT 1-bit hamming ecc code using software library - OMAP_ECC_HAMMING_CODE_HW 1-bit hamming ecc-code using GPMC h/w engine - OMAP_ECC_HAMMING_CODE_HW_ROMCODE 1-bit hamming ecc-code using GPMC h/w engin with ecc-layout compatible to ROM code. This patch combines above multiple ecc-schemes into single implementation: - OMAP_ECC_HAM1_CODE_HW 1-bit hamming ecc-code using GPMC h/w engine with ROM-code compatible ecc-layout. Signed-off-by: Pekon Gupta Reviewed-by: Felipe Balbi Acked-by: Tony Lindgren Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 8 ++++---- arch/arm/mach-omap2/board-flash.c | 2 +- drivers/mtd/nand/omap2.c | 9 +++------ include/linux/platform_data/mtd-nand-omap2.h | 7 +------ 4 files changed, 9 insertions(+), 17 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index bfe07e152738..5e1f31b5ff70 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -22,10 +22,10 @@ Optional properties: width of 8 is assumed. - ti,nand-ecc-opt: A string setting the ECC layout to use. One of: - - "sw" Software method (default) - "hw" Hardware method - "hw-romcode" gpmc hamming mode method & romcode layout + "sw" use "ham1" instead + "hw" use "ham1" instead + "hw-romcode" use "ham1" instead + "ham1" 1-bit Hamming ecc code "bch4" 4-bit BCH ecc code "bch8" 8-bit BCH ecc code diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index fc20a61f6b2a..ac82512b9c8c 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; - board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; + board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW; gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 4ecf0e5fd484..8d521aa001c8 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1993,10 +1993,7 @@ static int omap_nand_probe(struct platform_device *pdev) } /* select the ecc type */ - if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT) - info->nand.ecc.mode = NAND_ECC_SOFT; - else if ((pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) || - (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) { + if (pdata->ecc_opt == OMAP_ECC_HAM1_CODE_HW) { info->nand.ecc.bytes = 3; info->nand.ecc.size = 512; info->nand.ecc.strength = 1; @@ -2025,7 +2022,7 @@ static int omap_nand_probe(struct platform_device *pdev) } /* rom code layout */ - if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE) { + if (pdata->ecc_opt == OMAP_ECC_HAM1_CODE_HW) { if (info->nand.options & NAND_BUSWIDTH_16) offset = 2; @@ -2033,7 +2030,7 @@ static int omap_nand_probe(struct platform_device *pdev) offset = 1; info->nand.badblock_pattern = &bb_descrip_flashbased; } - omap_oobinfo.eccbytes = 3 * (info->mtd.oobsize/16); + omap_oobinfo.eccbytes = 3 * (info->mtd.writesize / 512); for (i = 0; i < omap_oobinfo.eccbytes; i++) omap_oobinfo.eccpos[i] = i+offset; diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index e4128f1510bf..4da5bfa2147f 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -23,13 +23,8 @@ enum nand_io { }; enum omap_ecc { - /* 1-bit ecc: stored at end of spare area */ - OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ - OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at beginning of spare area as romcode */ - OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ /* 1-bit ECC calculation by GPMC, Error detection by Software */ - OMAP_ECC_HAM1_CODE_HW, + OMAP_ECC_HAM1_CODE_HW = 0, /* 4-bit ECC calculation by GPMC, Error detection by Software */ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW, /* 4-bit ECC calculation by GPMC, Error detection by ELM */ -- cgit v1.2.3 From 633deb58e1ecc81486505fe9d3dc2aa3cfbca719 Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:19 +0530 Subject: mtd: nand: omap: cleanup: replace local references with generic framework names This patch updates following in omap_nand_probe() and omap_nand_remove() - replaces "info->nand" with "nand_chip" (struct nand_chip *nand_chip) - replaces "info->mtd" with "mtd" (struct mtd_info *mtd) - white-space and formatting cleanup Signed-off-by: Pekon Gupta Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/nand/omap2.c | 112 ++++++++++++++++++++++++----------------------- 1 file changed, 57 insertions(+), 55 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 8d521aa001c8..5596368a3574 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1824,10 +1824,12 @@ static int omap_nand_probe(struct platform_device *pdev) { struct omap_nand_info *info; struct omap_nand_platform_data *pdata; + struct mtd_info *mtd; + struct nand_chip *nand_chip; int err; int i, offset; - dma_cap_mask_t mask; - unsigned sig; + dma_cap_mask_t mask; + unsigned sig; struct resource *res; struct mtd_part_parser_data ppdata = {}; @@ -1846,17 +1848,16 @@ static int omap_nand_probe(struct platform_device *pdev) spin_lock_init(&info->controller.lock); init_waitqueue_head(&info->controller.wq); - info->pdev = pdev; - + info->pdev = pdev; info->gpmc_cs = pdata->cs; info->reg = pdata->reg; - - info->mtd.priv = &info->nand; - info->mtd.name = dev_name(&pdev->dev); - info->mtd.owner = THIS_MODULE; - - info->nand.options = pdata->devsize; - info->nand.options |= NAND_SKIP_BBTSCAN; + mtd = &info->mtd; + mtd->priv = &info->nand; + mtd->name = dev_name(&pdev->dev); + mtd->owner = THIS_MODULE; + nand_chip = &info->nand; + nand_chip->options = pdata->devsize; + nand_chip->options |= NAND_SKIP_BBTSCAN; #ifdef CONFIG_MTD_NAND_OMAP_BCH info->of_node = pdata->of_node; #endif @@ -1877,16 +1878,16 @@ static int omap_nand_probe(struct platform_device *pdev) goto out_free_info; } - info->nand.IO_ADDR_R = ioremap(info->phys_base, info->mem_size); - if (!info->nand.IO_ADDR_R) { + nand_chip->IO_ADDR_R = ioremap(info->phys_base, info->mem_size); + if (!nand_chip->IO_ADDR_R) { err = -ENOMEM; goto out_release_mem_region; } - info->nand.controller = &info->controller; + nand_chip->controller = &info->controller; - info->nand.IO_ADDR_W = info->nand.IO_ADDR_R; - info->nand.cmd_ctrl = omap_hwcontrol; + nand_chip->IO_ADDR_W = nand_chip->IO_ADDR_R; + nand_chip->cmd_ctrl = omap_hwcontrol; /* * If RDY/BSY line is connected to OMAP then use the omap ready @@ -1896,26 +1897,26 @@ static int omap_nand_probe(struct platform_device *pdev) * device and read status register until you get a failure or success */ if (pdata->dev_ready) { - info->nand.dev_ready = omap_dev_ready; - info->nand.chip_delay = 0; + nand_chip->dev_ready = omap_dev_ready; + nand_chip->chip_delay = 0; } else { - info->nand.waitfunc = omap_wait; - info->nand.chip_delay = 50; + nand_chip->waitfunc = omap_wait; + nand_chip->chip_delay = 50; } switch (pdata->xfer_type) { case NAND_OMAP_PREFETCH_POLLED: - info->nand.read_buf = omap_read_buf_pref; - info->nand.write_buf = omap_write_buf_pref; + nand_chip->read_buf = omap_read_buf_pref; + nand_chip->write_buf = omap_write_buf_pref; break; case NAND_OMAP_POLLED: - if (info->nand.options & NAND_BUSWIDTH_16) { - info->nand.read_buf = omap_read_buf16; - info->nand.write_buf = omap_write_buf16; + if (nand_chip->options & NAND_BUSWIDTH_16) { + nand_chip->read_buf = omap_read_buf16; + nand_chip->write_buf = omap_write_buf16; } else { - info->nand.read_buf = omap_read_buf8; - info->nand.write_buf = omap_write_buf8; + nand_chip->read_buf = omap_read_buf8; + nand_chip->write_buf = omap_write_buf8; } break; @@ -1944,8 +1945,8 @@ static int omap_nand_probe(struct platform_device *pdev) err); goto out_release_mem_region; } - info->nand.read_buf = omap_read_buf_dma_pref; - info->nand.write_buf = omap_write_buf_dma_pref; + nand_chip->read_buf = omap_read_buf_dma_pref; + nand_chip->write_buf = omap_write_buf_dma_pref; } break; @@ -1980,8 +1981,8 @@ static int omap_nand_probe(struct platform_device *pdev) goto out_release_mem_region; } - info->nand.read_buf = omap_read_buf_irq_pref; - info->nand.write_buf = omap_write_buf_irq_pref; + nand_chip->read_buf = omap_read_buf_irq_pref; + nand_chip->write_buf = omap_write_buf_irq_pref; break; @@ -1994,16 +1995,16 @@ static int omap_nand_probe(struct platform_device *pdev) /* select the ecc type */ if (pdata->ecc_opt == OMAP_ECC_HAM1_CODE_HW) { - info->nand.ecc.bytes = 3; - info->nand.ecc.size = 512; - info->nand.ecc.strength = 1; - info->nand.ecc.calculate = omap_calculate_ecc; - info->nand.ecc.hwctl = omap_enable_hwecc; - info->nand.ecc.correct = omap_correct_data; - info->nand.ecc.mode = NAND_ECC_HW; + nand_chip->ecc.bytes = 3; + nand_chip->ecc.size = 512; + nand_chip->ecc.strength = 1; + nand_chip->ecc.calculate = omap_calculate_ecc; + nand_chip->ecc.hwctl = omap_enable_hwecc; + nand_chip->ecc.correct = omap_correct_data; + nand_chip->ecc.mode = NAND_ECC_HW; } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) || (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) { - err = omap3_init_bch(&info->mtd, pdata->ecc_opt); + err = omap3_init_bch(mtd, pdata->ecc_opt); if (err) { err = -EINVAL; goto out_release_mem_region; @@ -2013,9 +2014,9 @@ static int omap_nand_probe(struct platform_device *pdev) /* DIP switches on some boards change between 8 and 16 bit * bus widths for flash. Try the other width if the first try fails. */ - if (nand_scan_ident(&info->mtd, 1, NULL)) { - info->nand.options ^= NAND_BUSWIDTH_16; - if (nand_scan_ident(&info->mtd, 1, NULL)) { + if (nand_scan_ident(mtd, 1, NULL)) { + nand_chip->options ^= NAND_BUSWIDTH_16; + if (nand_scan_ident(mtd, 1, NULL)) { err = -ENXIO; goto out_release_mem_region; } @@ -2024,25 +2025,25 @@ static int omap_nand_probe(struct platform_device *pdev) /* rom code layout */ if (pdata->ecc_opt == OMAP_ECC_HAM1_CODE_HW) { - if (info->nand.options & NAND_BUSWIDTH_16) + if (nand_chip->options & NAND_BUSWIDTH_16) { offset = 2; - else { + } else { offset = 1; - info->nand.badblock_pattern = &bb_descrip_flashbased; + nand_chip->badblock_pattern = &bb_descrip_flashbased; } - omap_oobinfo.eccbytes = 3 * (info->mtd.writesize / 512); + omap_oobinfo.eccbytes = 3 * (mtd->writesize / 512); for (i = 0; i < omap_oobinfo.eccbytes; i++) omap_oobinfo.eccpos[i] = i+offset; omap_oobinfo.oobfree->offset = offset + omap_oobinfo.eccbytes; - omap_oobinfo.oobfree->length = info->mtd.oobsize - + omap_oobinfo.oobfree->length = mtd->oobsize - (offset + omap_oobinfo.eccbytes); - info->nand.ecc.layout = &omap_oobinfo; + nand_chip->ecc.layout = &omap_oobinfo; } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) || (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) { /* build OOB layout for BCH ECC correction */ - err = omap3_init_bch_tail(&info->mtd); + err = omap3_init_bch_tail(mtd); if (err) { err = -EINVAL; goto out_release_mem_region; @@ -2050,16 +2051,16 @@ static int omap_nand_probe(struct platform_device *pdev) } /* second phase scan */ - if (nand_scan_tail(&info->mtd)) { + if (nand_scan_tail(mtd)) { err = -ENXIO; goto out_release_mem_region; } ppdata.of_node = pdata->of_node; - mtd_device_parse_register(&info->mtd, NULL, &ppdata, pdata->parts, + mtd_device_parse_register(mtd, NULL, &ppdata, pdata->parts, pdata->nr_parts); - platform_set_drvdata(pdev, &info->mtd); + platform_set_drvdata(pdev, mtd); return 0; @@ -2080,9 +2081,10 @@ out_free_info: static int omap_nand_remove(struct platform_device *pdev) { struct mtd_info *mtd = platform_get_drvdata(pdev); + struct nand_chip *nand_chip = mtd->priv; struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); - omap3_free_bch(&info->mtd); + omap3_free_bch(mtd); if (info->dma) dma_release_channel(info->dma); @@ -2093,8 +2095,8 @@ static int omap_nand_remove(struct platform_device *pdev) free_irq(info->gpmc_irq_fifo, info); /* Release NAND device, its internal structures and partitions */ - nand_release(&info->mtd); - iounmap(info->nand.IO_ADDR_R); + nand_release(mtd); + iounmap(nand_chip->IO_ADDR_R); release_mem_region(info->phys_base, info->mem_size); kfree(info); return 0; -- cgit v1.2.3 From f18befb57b0779094ac7658fa7be5cf559da835f Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:20 +0530 Subject: mtd: nand: omap: use DT specified bus-width only for scanning NAND device This patch: - calls nand_scan_ident() using bus-width as passed by DT - removes double calls to nand_scan_ident(), in case first call fails then omap_nand_probe just returns error. Signed-off-by: Pekon Gupta Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/nand/omap2.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 5596368a3574..f464321c598d 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1856,7 +1856,6 @@ static int omap_nand_probe(struct platform_device *pdev) mtd->name = dev_name(&pdev->dev); mtd->owner = THIS_MODULE; nand_chip = &info->nand; - nand_chip->options = pdata->devsize; nand_chip->options |= NAND_SKIP_BBTSCAN; #ifdef CONFIG_MTD_NAND_OMAP_BCH info->of_node = pdata->of_node; @@ -1904,6 +1903,15 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->chip_delay = 50; } + /* scan NAND device connected to chip controller */ + nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16; + if (nand_scan_ident(mtd, 1, NULL)) { + pr_err("nand device scan failed, may be bus-width mismatch\n"); + err = -ENXIO; + goto out_release_mem_region; + } + + /* re-populate low-level callbacks based on xfer modes */ switch (pdata->xfer_type) { case NAND_OMAP_PREFETCH_POLLED: nand_chip->read_buf = omap_read_buf_pref; @@ -2011,17 +2019,6 @@ static int omap_nand_probe(struct platform_device *pdev) } } - /* DIP switches on some boards change between 8 and 16 bit - * bus widths for flash. Try the other width if the first try fails. - */ - if (nand_scan_ident(mtd, 1, NULL)) { - nand_chip->options ^= NAND_BUSWIDTH_16; - if (nand_scan_ident(mtd, 1, NULL)) { - err = -ENXIO; - goto out_release_mem_region; - } - } - /* rom code layout */ if (pdata->ecc_opt == OMAP_ECC_HAM1_CODE_HW) { -- cgit v1.2.3 From a919e51161b58ed7e6e663daba99ab7d558808f3 Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:21 +0530 Subject: mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe current implementation in omap3_init_bch() has some redundant code like: (1) omap3_init_bch() re-probes the DT-binding to detect presence of ELM h/w engine on SoC. And based on that it selects implemetation of ecc-scheme. However, this is already done as part of GPMC DT parsing. (2) As omap3_init_bch() serves as common function for configuring all types of BCHx ecc-schemes, so there are multiple levels of redudant if..then..else checks while populating nand_chip->ecc. This patch make following changes to OMAP NAND driver: (1) removes omap3_init_bch(): each ecc-scheme is individually configured in omap_nand_probe() there by removing redundant if..then..else checks. (2) adds is_elm_present(): re-probing of ELM device via DT is not required as it's done in GPMC driver probe. Thus is_elm_present() just initializes ELM driver with NAND probe data, when ecc-scheme with h/w based error-detection is used. (3) separates out configuration of different flavours of "BCH4" and "BCH8" ecc-schemes as given in below table (4) conditionally compiles callbacks implementations of ecc.hwctl(), ecc.calculate(), ecc.correct() to avoid warning of un-used functions. +---------------------------------------+---------------+---------------+ | ECC scheme |ECC calculation|Error detection| +---------------------------------------+---------------+---------------+ |OMAP_ECC_HAM1_CODE_HW |H/W (GPMC) |S/W | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH4_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W (lib/bch.c)| | (needs CONFIG_MTD_NAND_ECC_BCH) | | | | | | | |OMAP_ECC_BCH4_CODE_HW |H/W (GPMC) |H/W (ELM) | | (needs CONFIG_MTD_NAND_OMAP_BCH && | | | | ti,elm-id) | | | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W (lib/bch.c)| | (needs CONFIG_MTD_NAND_ECC_BCH) | | | | | | | |OMAP_ECC_BCH8_CODE_HW |H/W (GPMC) |H/W (ELM) | | (needs CONFIG_MTD_NAND_OMAP_BCH && | | | | ti,elm-id) | | | +---------------------------------------+---------------+---------------+ - 'CONFIG_MTD_NAND_ECC_BCH' is generic KConfig required to build lib/bch.c which is required for ECC error detection done in software. (mainly used for legacy platforms which do not have on-chip ELM engine) - 'CONFIG_MTD_NAND_OMAP_BCH' is OMAP specific Kconfig to detemine presence on ELM h/w engine on SoC. Signed-off-by: Pekon Gupta Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/nand/omap2.c | 281 ++++++++++++++++++++++++++--------------------- 1 file changed, 158 insertions(+), 123 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index f464321c598d..86ce48b2c47a 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -25,10 +25,8 @@ #include #include -#ifdef CONFIG_MTD_NAND_OMAP_BCH #include #include -#endif #include @@ -141,6 +139,8 @@ #define BCH_ECC_SIZE0 0x0 /* ecc_size0 = 0, no oob protection */ #define BCH_ECC_SIZE1 0x20 /* ecc_size1 = 32 */ +#define OMAP_ECC_BCH8_POLYNOMIAL 0x201b + #ifdef CONFIG_MTD_NAND_OMAP_BCH static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc, 0xac, 0x6b, 0xff, 0x99, 0x7b}; @@ -182,14 +182,12 @@ struct omap_nand_info { u_char *buf; int buf_len; struct gpmc_nand_regs reg; - -#ifdef CONFIG_MTD_NAND_OMAP_BCH + /* fields specific for BCHx_HW ECC scheme */ struct bch_control *bch; struct nand_ecclayout ecclayout; bool is_elm_used; struct device *elm_dev; struct device_node *of_node; -#endif }; /** @@ -1058,8 +1056,7 @@ static int omap_dev_ready(struct mtd_info *mtd) } } -#ifdef CONFIG_MTD_NAND_OMAP_BCH - +#if defined(CONFIG_MTD_NAND_ECC_BCH) || defined(CONFIG_MTD_NAND_OMAP_BCH) /** * omap3_enable_hwecc_bch - Program OMAP3 GPMC to perform BCH ECC correction * @mtd: MTD device structure @@ -1140,7 +1137,9 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) /* Clear ecc and enable bits */ writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control); } +#endif +#ifdef CONFIG_MTD_NAND_ECC_BCH /** * omap3_calculate_ecc_bch4 - Generate 7 bytes of ECC bytes * @mtd: MTD device structure @@ -1225,7 +1224,9 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat, return 0; } +#endif /* CONFIG_MTD_NAND_ECC_BCH */ +#ifdef CONFIG_MTD_NAND_OMAP_BCH /** * omap3_calculate_ecc_bch - Generate bytes of ECC bytes * @mtd: MTD device structure @@ -1517,7 +1518,9 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, return stat; } +#endif /* CONFIG_MTD_NAND_OMAP_BCH */ +#ifdef CONFIG_MTD_NAND_ECC_BCH /** * omap3_correct_data_bch - Decode received data and correct errors * @mtd: MTD device structure @@ -1549,7 +1552,9 @@ static int omap3_correct_data_bch(struct mtd_info *mtd, u_char *data, } return count; } +#endif /* CONFIG_MTD_NAND_ECC_BCH */ +#ifdef CONFIG_MTD_NAND_OMAP_BCH /** * omap_write_page_bch - BCH ecc based write page function for entire page * @mtd: mtd info structure @@ -1637,118 +1642,48 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, } /** - * omap3_free_bch - Release BCH ecc resources - * @mtd: MTD device structure + * is_elm_present - checks for presence of ELM module by scanning DT nodes + * @omap_nand_info: NAND device structure containing platform data + * @bch_type: 0x0=BCH4, 0x1=BCH8, 0x2=BCH16 */ -static void omap3_free_bch(struct mtd_info *mtd) +static int is_elm_present(struct omap_nand_info *info, + struct device_node *elm_node, enum bch_ecc bch_type) { - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - if (info->bch) { - free_bch(info->bch); - info->bch = NULL; + struct platform_device *pdev; + info->is_elm_used = false; + /* check whether elm-id is passed via DT */ + if (!elm_node) { + pr_err("nand: error: ELM DT node not found\n"); + return -ENODEV; + } + pdev = of_find_device_by_node(elm_node); + /* check whether ELM device is registered */ + if (!pdev) { + pr_err("nand: error: ELM device not found\n"); + return -ENODEV; } + /* ELM module available, now configure it */ + info->elm_dev = &pdev->dev; + if (elm_config(info->elm_dev, bch_type)) + return -ENODEV; + info->is_elm_used = true; + return 0; } +#endif /* CONFIG_MTD_NAND_ECC_BCH */ +#ifdef CONFIG_MTD_NAND_ECC_BCH /** - * omap3_init_bch - Initialize BCH ECC + * omap3_free_bch - Release BCH ecc resources * @mtd: MTD device structure - * @ecc_opt: OMAP ECC mode (OMAP_ECC_BCH4_CODE_HW or OMAP_ECC_BCH8_CODE_HW) */ -static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) +static void omap3_free_bch(struct mtd_info *mtd) { - int max_errors; struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); -#ifdef CONFIG_MTD_NAND_OMAP_BCH8 - const int hw_errors = BCH8_MAX_ERROR; -#else - const int hw_errors = BCH4_MAX_ERROR; -#endif - enum bch_ecc bch_type; - const __be32 *parp; - int lenp; - struct device_node *elm_node; - - info->bch = NULL; - - max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ? - BCH8_MAX_ERROR : BCH4_MAX_ERROR; - if (max_errors != hw_errors) { - pr_err("cannot configure %d-bit BCH ecc, only %d-bit supported", - max_errors, hw_errors); - goto fail; - } - - info->nand.ecc.size = 512; - info->nand.ecc.hwctl = omap3_enable_hwecc_bch; - info->nand.ecc.mode = NAND_ECC_HW; - info->nand.ecc.strength = max_errors; - - if (hw_errors == BCH8_MAX_ERROR) - bch_type = BCH8_ECC; - else - bch_type = BCH4_ECC; - - /* Detect availability of ELM module */ - parp = of_get_property(info->of_node, "elm_id", &lenp); - if ((parp == NULL) && (lenp != (sizeof(void *) * 2))) { - pr_err("Missing elm_id property, fall back to Software BCH\n"); - info->is_elm_used = false; - } else { - struct platform_device *pdev; - - elm_node = of_find_node_by_phandle(be32_to_cpup(parp)); - pdev = of_find_device_by_node(elm_node); - info->elm_dev = &pdev->dev; - - if (elm_config(info->elm_dev, bch_type) == 0) - info->is_elm_used = true; - } - - if (info->is_elm_used && (mtd->writesize <= 4096)) { - - if (hw_errors == BCH8_MAX_ERROR) - info->nand.ecc.bytes = BCH8_SIZE; - else - info->nand.ecc.bytes = BCH4_SIZE; - - info->nand.ecc.correct = omap_elm_correct_data; - info->nand.ecc.calculate = omap3_calculate_ecc_bch; - info->nand.ecc.read_page = omap_read_page_bch; - info->nand.ecc.write_page = omap_write_page_bch; - } else { - /* - * software bch library is only used to detect and - * locate errors - */ - info->bch = init_bch(13, max_errors, - 0x201b /* hw polynomial */); - if (!info->bch) - goto fail; - - info->nand.ecc.correct = omap3_correct_data_bch; - - /* - * The number of corrected errors in an ecc block that will - * trigger block scrubbing defaults to the ecc strength (4 or 8) - * Set mtd->bitflip_threshold here to define a custom threshold. - */ - - if (max_errors == 8) { - info->nand.ecc.bytes = 13; - info->nand.ecc.calculate = omap3_calculate_ecc_bch8; - } else { - info->nand.ecc.bytes = 7; - info->nand.ecc.calculate = omap3_calculate_ecc_bch4; - } + if (info->bch) { + free_bch(info->bch); + info->bch = NULL; } - - pr_info("enabling NAND BCH ecc with %d-bit correction\n", max_errors); - return 0; -fail: - omap3_free_bch(mtd); - return -1; } /** @@ -1806,11 +1741,6 @@ fail: } #else -static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) -{ - pr_err("CONFIG_MTD_NAND_OMAP_BCH is not enabled\n"); - return -1; -} static int omap3_init_bch_tail(struct mtd_info *mtd) { return -1; @@ -1818,7 +1748,7 @@ static int omap3_init_bch_tail(struct mtd_info *mtd) static void omap3_free_bch(struct mtd_info *mtd) { } -#endif /* CONFIG_MTD_NAND_OMAP_BCH */ +#endif /* CONFIG_MTD_NAND_ECC_BCH */ static int omap_nand_probe(struct platform_device *pdev) { @@ -1851,15 +1781,14 @@ static int omap_nand_probe(struct platform_device *pdev) info->pdev = pdev; info->gpmc_cs = pdata->cs; info->reg = pdata->reg; + info->bch = NULL; + info->of_node = pdata->of_node; mtd = &info->mtd; mtd->priv = &info->nand; mtd->name = dev_name(&pdev->dev); mtd->owner = THIS_MODULE; nand_chip = &info->nand; nand_chip->options |= NAND_SKIP_BBTSCAN; -#ifdef CONFIG_MTD_NAND_OMAP_BCH - info->of_node = pdata->of_node; -#endif res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { @@ -2001,22 +1930,125 @@ static int omap_nand_probe(struct platform_device *pdev) goto out_release_mem_region; } - /* select the ecc type */ - if (pdata->ecc_opt == OMAP_ECC_HAM1_CODE_HW) { + /* populate MTD interface based on ECC scheme */ + switch (pdata->ecc_opt) { + case OMAP_ECC_HAM1_CODE_HW: + pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n"); + nand_chip->ecc.mode = NAND_ECC_HW; nand_chip->ecc.bytes = 3; nand_chip->ecc.size = 512; nand_chip->ecc.strength = 1; nand_chip->ecc.calculate = omap_calculate_ecc; nand_chip->ecc.hwctl = omap_enable_hwecc; nand_chip->ecc.correct = omap_correct_data; - nand_chip->ecc.mode = NAND_ECC_HW; - } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) || - (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) { - err = omap3_init_bch(mtd, pdata->ecc_opt); - if (err) { + break; + + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: +#ifdef CONFIG_MTD_NAND_ECC_BCH + pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n"); + nand_chip->ecc.mode = NAND_ECC_HW; + nand_chip->ecc.size = 512; + nand_chip->ecc.bytes = 7; + nand_chip->ecc.strength = 4; + nand_chip->ecc.hwctl = omap3_enable_hwecc_bch; + nand_chip->ecc.correct = omap3_correct_data_bch; + nand_chip->ecc.calculate = omap3_calculate_ecc_bch4; + /* software bch library is used for locating errors */ + info->bch = init_bch(nand_chip->ecc.bytes, + nand_chip->ecc.strength, + OMAP_ECC_BCH8_POLYNOMIAL); + if (!info->bch) { + pr_err("nand: error: unable to use s/w BCH library\n"); err = -EINVAL; + } + break; +#else + pr_err("nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled\n"); + err = -EINVAL; + goto out_release_mem_region; +#endif + + case OMAP_ECC_BCH4_CODE_HW: +#ifdef CONFIG_MTD_NAND_OMAP_BCH + pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n"); + nand_chip->ecc.mode = NAND_ECC_HW; + nand_chip->ecc.size = 512; + /* 14th bit is kept reserved for ROM-code compatibility */ + nand_chip->ecc.bytes = 7 + 1; + nand_chip->ecc.strength = 4; + nand_chip->ecc.hwctl = omap3_enable_hwecc_bch; + nand_chip->ecc.correct = omap_elm_correct_data; + nand_chip->ecc.calculate = omap3_calculate_ecc_bch; + nand_chip->ecc.read_page = omap_read_page_bch; + nand_chip->ecc.write_page = omap_write_page_bch; + /* This ECC scheme requires ELM H/W block */ + if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) { + pr_err("nand: error: could not initialize ELM\n"); + err = -ENODEV; goto out_release_mem_region; } + break; +#else + pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); + err = -EINVAL; + goto out_release_mem_region; +#endif + + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: +#ifdef CONFIG_MTD_NAND_ECC_BCH + pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n"); + nand_chip->ecc.mode = NAND_ECC_HW; + nand_chip->ecc.size = 512; + nand_chip->ecc.bytes = 13; + nand_chip->ecc.strength = 8; + nand_chip->ecc.hwctl = omap3_enable_hwecc_bch; + nand_chip->ecc.correct = omap3_correct_data_bch; + nand_chip->ecc.calculate = omap3_calculate_ecc_bch8; + /* software bch library is used for locating errors */ + info->bch = init_bch(nand_chip->ecc.bytes, + nand_chip->ecc.strength, + OMAP_ECC_BCH8_POLYNOMIAL); + if (!info->bch) { + pr_err("nand: error: unable to use s/w BCH library\n"); + err = -EINVAL; + goto out_release_mem_region; + } + break; +#else + pr_err("nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled\n"); + err = -EINVAL; + goto out_release_mem_region; +#endif + + case OMAP_ECC_BCH8_CODE_HW: +#ifdef CONFIG_MTD_NAND_OMAP_BCH + pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n"); + nand_chip->ecc.mode = NAND_ECC_HW; + nand_chip->ecc.size = 512; + /* 14th bit is kept reserved for ROM-code compatibility */ + nand_chip->ecc.bytes = 13 + 1; + nand_chip->ecc.strength = 8; + nand_chip->ecc.hwctl = omap3_enable_hwecc_bch; + nand_chip->ecc.correct = omap_elm_correct_data; + nand_chip->ecc.calculate = omap3_calculate_ecc_bch; + nand_chip->ecc.read_page = omap_read_page_bch; + nand_chip->ecc.write_page = omap_write_page_bch; + /* This ECC scheme requires ELM H/W block */ + if (is_elm_present(info, pdata->elm_of_node, BCH8_ECC) < 0) { + pr_err("nand: error: could not initialize ELM\n"); + goto out_release_mem_region; + } + break; +#else + pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); + err = -EINVAL; + goto out_release_mem_region; +#endif + + default: + pr_err("nand: error: invalid or unsupported ECC scheme\n"); + err = -EINVAL; + goto out_release_mem_region; } /* rom code layout */ @@ -2038,6 +2070,8 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.layout = &omap_oobinfo; } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) || + (pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) || + (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) || (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) { /* build OOB layout for BCH ECC correction */ err = omap3_init_bch_tail(mtd); @@ -2070,6 +2104,7 @@ out_release_mem_region: free_irq(info->gpmc_irq_fifo, info); release_mem_region(info->phys_base, info->mem_size); out_free_info: + omap3_free_bch(mtd); kfree(info); return err; -- cgit v1.2.3 From b491da7233d5dc1a24d46ca1ad0209900329c5d0 Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:22 +0530 Subject: mtd: nand: omap: clean-up ecc layout for BCH ecc schemes In current implementation omap3_init_bch_tail() is a common function to define ecc layout for different BCHx ecc schemes.This patch: (1) removes omap3_init_bch_tail() and defines ecc layout for individual ecc-schemes along with populating their nand_chip->ecc data in omap_nand_probe(). This improves the readability and scalability of code for add new ecc schemes in future. (2) removes 'struct nand_bbt_descr bb_descrip_flashbased' because default nand_bbt_descr in nand_bbt.c matches the same (.len=1 for x8 devices). (3) add the check to see if NAND device has enough OOB/Spare bytes to store ECC signature of whole page, as defined by ecc-scheme. Signed-off-by: Pekon Gupta Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/nand/omap2.c | 161 ++++++++++++++++++----------------------------- 1 file changed, 62 insertions(+), 99 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 86ce48b2c47a..b6a08b23853b 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -139,6 +139,7 @@ #define BCH_ECC_SIZE0 0x0 /* ecc_size0 = 0, no oob protection */ #define BCH_ECC_SIZE1 0x20 /* ecc_size1 = 32 */ +#define BADBLOCK_MARKER_LENGTH 2 #define OMAP_ECC_BCH8_POLYNOMIAL 0x201b #ifdef CONFIG_MTD_NAND_OMAP_BCH @@ -149,17 +150,6 @@ static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10}; /* oob info generated runtime depending on ecc algorithm and layout selected */ static struct nand_ecclayout omap_oobinfo; -/* Define some generic bad / good block scan pattern which are used - * while scanning a device for factory marked good / bad blocks - */ -static uint8_t scan_ff_pattern[] = { 0xff }; -static struct nand_bbt_descr bb_descrip_flashbased = { - .options = NAND_BBT_SCANALLPAGES, - .offs = 0, - .len = 1, - .pattern = scan_ff_pattern, -}; - struct omap_nand_info { struct nand_hw_control controller; @@ -184,7 +174,6 @@ struct omap_nand_info { struct gpmc_nand_regs reg; /* fields specific for BCHx_HW ECC scheme */ struct bch_control *bch; - struct nand_ecclayout ecclayout; bool is_elm_used; struct device *elm_dev; struct device_node *of_node; @@ -1686,65 +1675,8 @@ static void omap3_free_bch(struct mtd_info *mtd) } } -/** - * omap3_init_bch_tail - Build an oob layout for BCH ECC correction. - * @mtd: MTD device structure - */ -static int omap3_init_bch_tail(struct mtd_info *mtd) -{ - int i, steps, offset; - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - struct nand_ecclayout *layout = &info->ecclayout; - - /* build oob layout */ - steps = mtd->writesize/info->nand.ecc.size; - layout->eccbytes = steps*info->nand.ecc.bytes; - - /* do not bother creating special oob layouts for small page devices */ - if (mtd->oobsize < 64) { - pr_err("BCH ecc is not supported on small page devices\n"); - goto fail; - } - - /* reserve 2 bytes for bad block marker */ - if (layout->eccbytes+2 > mtd->oobsize) { - pr_err("no oob layout available for oobsize %d eccbytes %u\n", - mtd->oobsize, layout->eccbytes); - goto fail; - } - - /* ECC layout compatible with RBL for BCH8 */ - if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE)) - offset = 2; - else - offset = mtd->oobsize - layout->eccbytes; - - /* put ecc bytes at oob tail */ - for (i = 0; i < layout->eccbytes; i++) - layout->eccpos[i] = offset + i; - - if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE)) - layout->oobfree[0].offset = 2 + layout->eccbytes * steps; - else - layout->oobfree[0].offset = 2; - - layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes; - info->nand.ecc.layout = layout; - - if (!(info->nand.options & NAND_BUSWIDTH_16)) - info->nand.badblock_pattern = &bb_descrip_flashbased; - return 0; -fail: - omap3_free_bch(mtd); - return -1; -} - #else -static int omap3_init_bch_tail(struct mtd_info *mtd) -{ - return -1; -} + static void omap3_free_bch(struct mtd_info *mtd) { } @@ -1756,8 +1688,9 @@ static int omap_nand_probe(struct platform_device *pdev) struct omap_nand_platform_data *pdata; struct mtd_info *mtd; struct nand_chip *nand_chip; + struct nand_ecclayout *ecclayout; int err; - int i, offset; + int i; dma_cap_mask_t mask; unsigned sig; struct resource *res; @@ -1840,6 +1773,13 @@ static int omap_nand_probe(struct platform_device *pdev) goto out_release_mem_region; } + /* check for small page devices */ + if ((mtd->oobsize < 64) && (pdata->ecc_opt != OMAP_ECC_HAM1_CODE_HW)) { + pr_err("small page devices are not supported\n"); + err = -EINVAL; + goto out_release_mem_region; + } + /* re-populate low-level callbacks based on xfer modes */ switch (pdata->xfer_type) { case NAND_OMAP_PREFETCH_POLLED: @@ -1931,6 +1871,8 @@ static int omap_nand_probe(struct platform_device *pdev) } /* populate MTD interface based on ECC scheme */ + nand_chip->ecc.layout = &omap_oobinfo; + ecclayout = &omap_oobinfo; switch (pdata->ecc_opt) { case OMAP_ECC_HAM1_CODE_HW: pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n"); @@ -1941,6 +1883,16 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.calculate = omap_calculate_ecc; nand_chip->ecc.hwctl = omap_enable_hwecc; nand_chip->ecc.correct = omap_correct_data; + /* define ECC layout */ + ecclayout->eccbytes = nand_chip->ecc.bytes * + (mtd->writesize / + nand_chip->ecc.size); + if (nand_chip->options & NAND_BUSWIDTH_16) + ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + else + ecclayout->eccpos[0] = 1; + ecclayout->oobfree->offset = ecclayout->eccpos[0] + + ecclayout->eccbytes; break; case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: @@ -1953,6 +1905,13 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.hwctl = omap3_enable_hwecc_bch; nand_chip->ecc.correct = omap3_correct_data_bch; nand_chip->ecc.calculate = omap3_calculate_ecc_bch4; + /* define ECC layout */ + ecclayout->eccbytes = nand_chip->ecc.bytes * + (mtd->writesize / + nand_chip->ecc.size); + ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree->offset = ecclayout->eccpos[0] + + ecclayout->eccbytes; /* software bch library is used for locating errors */ info->bch = init_bch(nand_chip->ecc.bytes, nand_chip->ecc.strength, @@ -1981,6 +1940,13 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.calculate = omap3_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + /* define ECC layout */ + ecclayout->eccbytes = nand_chip->ecc.bytes * + (mtd->writesize / + nand_chip->ecc.size); + ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree->offset = ecclayout->eccpos[0] + + ecclayout->eccbytes; /* This ECC scheme requires ELM H/W block */ if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) { pr_err("nand: error: could not initialize ELM\n"); @@ -2004,6 +1970,13 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.hwctl = omap3_enable_hwecc_bch; nand_chip->ecc.correct = omap3_correct_data_bch; nand_chip->ecc.calculate = omap3_calculate_ecc_bch8; + /* define ECC layout */ + ecclayout->eccbytes = nand_chip->ecc.bytes * + (mtd->writesize / + nand_chip->ecc.size); + ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree->offset = ecclayout->eccpos[0] + + ecclayout->eccbytes; /* software bch library is used for locating errors */ info->bch = init_bch(nand_chip->ecc.bytes, nand_chip->ecc.strength, @@ -2038,6 +2011,13 @@ static int omap_nand_probe(struct platform_device *pdev) pr_err("nand: error: could not initialize ELM\n"); goto out_release_mem_region; } + /* define ECC layout */ + ecclayout->eccbytes = nand_chip->ecc.bytes * + (mtd->writesize / + nand_chip->ecc.size); + ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree->offset = ecclayout->eccpos[0] + + ecclayout->eccbytes; break; #else pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); @@ -2051,34 +2031,17 @@ static int omap_nand_probe(struct platform_device *pdev) goto out_release_mem_region; } - /* rom code layout */ - if (pdata->ecc_opt == OMAP_ECC_HAM1_CODE_HW) { - - if (nand_chip->options & NAND_BUSWIDTH_16) { - offset = 2; - } else { - offset = 1; - nand_chip->badblock_pattern = &bb_descrip_flashbased; - } - omap_oobinfo.eccbytes = 3 * (mtd->writesize / 512); - for (i = 0; i < omap_oobinfo.eccbytes; i++) - omap_oobinfo.eccpos[i] = i+offset; - - omap_oobinfo.oobfree->offset = offset + omap_oobinfo.eccbytes; - omap_oobinfo.oobfree->length = mtd->oobsize - - (offset + omap_oobinfo.eccbytes); - - nand_chip->ecc.layout = &omap_oobinfo; - } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) || - (pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) || - (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) || - (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) { - /* build OOB layout for BCH ECC correction */ - err = omap3_init_bch_tail(mtd); - if (err) { - err = -EINVAL; - goto out_release_mem_region; - } + /* populate remaining ECC layout data */ + ecclayout->oobfree->length = mtd->oobsize - (BADBLOCK_MARKER_LENGTH + + ecclayout->eccbytes); + for (i = 1; i < ecclayout->eccbytes; i++) + ecclayout->eccpos[i] = ecclayout->eccpos[0] + i; + /* check if NAND device's OOB is enough to store ECC signatures */ + if (mtd->oobsize < (ecclayout->eccbytes + BADBLOCK_MARKER_LENGTH)) { + pr_err("not enough OOB bytes required = %d, available=%d\n", + ecclayout->eccbytes, mtd->oobsize); + err = -EINVAL; + goto out_release_mem_region; } /* second phase scan */ -- cgit v1.2.3 From 32d42a855a6f1445373f3d680e9125344aca294c Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:23 +0530 Subject: mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c generic frame-work in mtd/nand/nand_bch.c is a wrapper above lib/bch.h which encapsulates all control information specific to BCH ecc algorithm in software. Thus this patch: (1) replace omap specific implementations with equivalent wrapper in nand_bch.c so that generic code from nand_bch.c is re-used. like; omap3_correct_data_bch() -> nand_bch_correct_data() omap3_free_bch() -> nand_bch_free() (2) replace direct calls to lib/bch.c with wrapper functions defined in nand_bch.c init_bch() -> nand_bch_init() Signed-off-by: Pekon Gupta Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/nand/omap2.c | 96 +++++++++++------------------------------------- 1 file changed, 22 insertions(+), 74 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index b6a08b23853b..93aa35c8260c 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include #include @@ -140,7 +140,6 @@ #define BCH_ECC_SIZE1 0x20 /* ecc_size1 = 32 */ #define BADBLOCK_MARKER_LENGTH 2 -#define OMAP_ECC_BCH8_POLYNOMIAL 0x201b #ifdef CONFIG_MTD_NAND_OMAP_BCH static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc, @@ -173,7 +172,6 @@ struct omap_nand_info { int buf_len; struct gpmc_nand_regs reg; /* fields specific for BCHx_HW ECC scheme */ - struct bch_control *bch; bool is_elm_used; struct device *elm_dev; struct device_node *of_node; @@ -1507,43 +1505,7 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, return stat; } -#endif /* CONFIG_MTD_NAND_OMAP_BCH */ -#ifdef CONFIG_MTD_NAND_ECC_BCH -/** - * omap3_correct_data_bch - Decode received data and correct errors - * @mtd: MTD device structure - * @data: page data - * @read_ecc: ecc read from nand flash - * @calc_ecc: ecc read from HW ECC registers - */ -static int omap3_correct_data_bch(struct mtd_info *mtd, u_char *data, - u_char *read_ecc, u_char *calc_ecc) -{ - int i, count; - /* cannot correct more than 8 errors */ - unsigned int errloc[8]; - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - - count = decode_bch(info->bch, NULL, 512, read_ecc, calc_ecc, NULL, - errloc); - if (count > 0) { - /* correct errors */ - for (i = 0; i < count; i++) { - /* correct data only, not ecc bytes */ - if (errloc[i] < 8*512) - data[errloc[i]/8] ^= 1 << (errloc[i] & 7); - pr_debug("corrected bitflip %u\n", errloc[i]); - } - } else if (count < 0) { - pr_err("ecc unrecoverable error\n"); - } - return count; -} -#endif /* CONFIG_MTD_NAND_ECC_BCH */ - -#ifdef CONFIG_MTD_NAND_OMAP_BCH /** * omap_write_page_bch - BCH ecc based write page function for entire page * @mtd: mtd info structure @@ -1660,28 +1622,6 @@ static int is_elm_present(struct omap_nand_info *info, } #endif /* CONFIG_MTD_NAND_ECC_BCH */ -#ifdef CONFIG_MTD_NAND_ECC_BCH -/** - * omap3_free_bch - Release BCH ecc resources - * @mtd: MTD device structure - */ -static void omap3_free_bch(struct mtd_info *mtd) -{ - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - if (info->bch) { - free_bch(info->bch); - info->bch = NULL; - } -} - -#else - -static void omap3_free_bch(struct mtd_info *mtd) -{ -} -#endif /* CONFIG_MTD_NAND_ECC_BCH */ - static int omap_nand_probe(struct platform_device *pdev) { struct omap_nand_info *info; @@ -1714,13 +1654,13 @@ static int omap_nand_probe(struct platform_device *pdev) info->pdev = pdev; info->gpmc_cs = pdata->cs; info->reg = pdata->reg; - info->bch = NULL; info->of_node = pdata->of_node; mtd = &info->mtd; mtd->priv = &info->nand; mtd->name = dev_name(&pdev->dev); mtd->owner = THIS_MODULE; nand_chip = &info->nand; + nand_chip->ecc.priv = NULL; nand_chip->options |= NAND_SKIP_BBTSCAN; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1903,7 +1843,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.bytes = 7; nand_chip->ecc.strength = 4; nand_chip->ecc.hwctl = omap3_enable_hwecc_bch; - nand_chip->ecc.correct = omap3_correct_data_bch; + nand_chip->ecc.correct = nand_bch_correct_data; nand_chip->ecc.calculate = omap3_calculate_ecc_bch4; /* define ECC layout */ ecclayout->eccbytes = nand_chip->ecc.bytes * @@ -1913,10 +1853,11 @@ static int omap_nand_probe(struct platform_device *pdev) ecclayout->oobfree->offset = ecclayout->eccpos[0] + ecclayout->eccbytes; /* software bch library is used for locating errors */ - info->bch = init_bch(nand_chip->ecc.bytes, - nand_chip->ecc.strength, - OMAP_ECC_BCH8_POLYNOMIAL); - if (!info->bch) { + nand_chip->ecc.priv = nand_bch_init(mtd, + nand_chip->ecc.size, + nand_chip->ecc.bytes, + &nand_chip->ecc.layout); + if (!nand_chip->ecc.priv) { pr_err("nand: error: unable to use s/w BCH library\n"); err = -EINVAL; } @@ -1968,7 +1909,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.bytes = 13; nand_chip->ecc.strength = 8; nand_chip->ecc.hwctl = omap3_enable_hwecc_bch; - nand_chip->ecc.correct = omap3_correct_data_bch; + nand_chip->ecc.correct = nand_bch_correct_data; nand_chip->ecc.calculate = omap3_calculate_ecc_bch8; /* define ECC layout */ ecclayout->eccbytes = nand_chip->ecc.bytes * @@ -1978,10 +1919,11 @@ static int omap_nand_probe(struct platform_device *pdev) ecclayout->oobfree->offset = ecclayout->eccpos[0] + ecclayout->eccbytes; /* software bch library is used for locating errors */ - info->bch = init_bch(nand_chip->ecc.bytes, - nand_chip->ecc.strength, - OMAP_ECC_BCH8_POLYNOMIAL); - if (!info->bch) { + nand_chip->ecc.priv = nand_bch_init(mtd, + nand_chip->ecc.size, + nand_chip->ecc.bytes, + &nand_chip->ecc.layout); + if (!nand_chip->ecc.priv) { pr_err("nand: error: unable to use s/w BCH library\n"); err = -EINVAL; goto out_release_mem_region; @@ -2067,7 +2009,10 @@ out_release_mem_region: free_irq(info->gpmc_irq_fifo, info); release_mem_region(info->phys_base, info->mem_size); out_free_info: - omap3_free_bch(mtd); + if (nand_chip->ecc.priv) { + nand_bch_free(nand_chip->ecc.priv); + nand_chip->ecc.priv = NULL; + } kfree(info); return err; @@ -2079,7 +2024,10 @@ static int omap_nand_remove(struct platform_device *pdev) struct nand_chip *nand_chip = mtd->priv; struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); - omap3_free_bch(mtd); + if (nand_chip->ecc.priv) { + nand_bch_free(nand_chip->ecc.priv); + nand_chip->ecc.priv = NULL; + } if (info->dma) dma_release_channel(info->dma); -- cgit v1.2.3 From 70ba6d71ddcde8aa5a6e2b7f616e77b4bb96b984 Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:25 +0530 Subject: mtd: nand: omap: updated devm_xx for all resource allocation and free calls "Managed Device Resource" or devm_xx calls takes care of automatic freeing of the resource in case of: - failure during driver probe - failure during resource allocation - detaching or unloading of driver module (rmmod) Reference: Documentation/driver-model/devres.txt Though OMAP NAND driver handles freeing of resource allocation in most of the cases, but using devm_xx provides more clean and effortless approach to handle all such cases. - simplifies label for exiting probe during error s/out_release_mem_region/return_error Signed-off-by: Pekon Gupta Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/nand/omap2.c | 85 ++++++++++++++++++++---------------------------- 1 file changed, 35 insertions(+), 50 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 93aa35c8260c..ec40b8d10201 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1642,7 +1642,8 @@ static int omap_nand_probe(struct platform_device *pdev) return -ENODEV; } - info = kzalloc(sizeof(struct omap_nand_info), GFP_KERNEL); + info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info), + GFP_KERNEL); if (!info) return -ENOMEM; @@ -1667,22 +1668,23 @@ static int omap_nand_probe(struct platform_device *pdev) if (res == NULL) { err = -EINVAL; dev_err(&pdev->dev, "error getting memory resource\n"); - goto out_free_info; + goto return_error; } info->phys_base = res->start; info->mem_size = resource_size(res); - if (!request_mem_region(info->phys_base, info->mem_size, - pdev->dev.driver->name)) { + if (!devm_request_mem_region(&pdev->dev, info->phys_base, + info->mem_size, pdev->dev.driver->name)) { err = -EBUSY; - goto out_free_info; + goto return_error; } - nand_chip->IO_ADDR_R = ioremap(info->phys_base, info->mem_size); + nand_chip->IO_ADDR_R = devm_ioremap(&pdev->dev, info->phys_base, + info->mem_size); if (!nand_chip->IO_ADDR_R) { err = -ENOMEM; - goto out_release_mem_region; + goto return_error; } nand_chip->controller = &info->controller; @@ -1710,14 +1712,14 @@ static int omap_nand_probe(struct platform_device *pdev) if (nand_scan_ident(mtd, 1, NULL)) { pr_err("nand device scan failed, may be bus-width mismatch\n"); err = -ENXIO; - goto out_release_mem_region; + goto return_error; } /* check for small page devices */ if ((mtd->oobsize < 64) && (pdata->ecc_opt != OMAP_ECC_HAM1_CODE_HW)) { pr_err("small page devices are not supported\n"); err = -EINVAL; - goto out_release_mem_region; + goto return_error; } /* re-populate low-level callbacks based on xfer modes */ @@ -1745,7 +1747,7 @@ static int omap_nand_probe(struct platform_device *pdev) if (!info->dma) { dev_err(&pdev->dev, "DMA engine request failed\n"); err = -ENXIO; - goto out_release_mem_region; + goto return_error; } else { struct dma_slave_config cfg; @@ -1760,7 +1762,7 @@ static int omap_nand_probe(struct platform_device *pdev) if (err) { dev_err(&pdev->dev, "DMA engine slave config failed: %d\n", err); - goto out_release_mem_region; + goto return_error; } nand_chip->read_buf = omap_read_buf_dma_pref; nand_chip->write_buf = omap_write_buf_dma_pref; @@ -1772,30 +1774,32 @@ static int omap_nand_probe(struct platform_device *pdev) if (info->gpmc_irq_fifo <= 0) { dev_err(&pdev->dev, "error getting fifo irq\n"); err = -ENODEV; - goto out_release_mem_region; + goto return_error; } - err = request_irq(info->gpmc_irq_fifo, omap_nand_irq, - IRQF_SHARED, "gpmc-nand-fifo", info); + err = devm_request_irq(&pdev->dev, info->gpmc_irq_fifo, + omap_nand_irq, IRQF_SHARED, + "gpmc-nand-fifo", info); if (err) { dev_err(&pdev->dev, "requesting irq(%d) error:%d", info->gpmc_irq_fifo, err); info->gpmc_irq_fifo = 0; - goto out_release_mem_region; + goto return_error; } info->gpmc_irq_count = platform_get_irq(pdev, 1); if (info->gpmc_irq_count <= 0) { dev_err(&pdev->dev, "error getting count irq\n"); err = -ENODEV; - goto out_release_mem_region; + goto return_error; } - err = request_irq(info->gpmc_irq_count, omap_nand_irq, - IRQF_SHARED, "gpmc-nand-count", info); + err = devm_request_irq(&pdev->dev, info->gpmc_irq_count, + omap_nand_irq, IRQF_SHARED, + "gpmc-nand-count", info); if (err) { dev_err(&pdev->dev, "requesting irq(%d) error:%d", info->gpmc_irq_count, err); info->gpmc_irq_count = 0; - goto out_release_mem_region; + goto return_error; } nand_chip->read_buf = omap_read_buf_irq_pref; @@ -1807,7 +1811,7 @@ static int omap_nand_probe(struct platform_device *pdev) dev_err(&pdev->dev, "xfer_type(%d) not supported!\n", pdata->xfer_type); err = -EINVAL; - goto out_release_mem_region; + goto return_error; } /* populate MTD interface based on ECC scheme */ @@ -1865,7 +1869,7 @@ static int omap_nand_probe(struct platform_device *pdev) #else pr_err("nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled\n"); err = -EINVAL; - goto out_release_mem_region; + goto return_error; #endif case OMAP_ECC_BCH4_CODE_HW: @@ -1892,13 +1896,13 @@ static int omap_nand_probe(struct platform_device *pdev) if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) { pr_err("nand: error: could not initialize ELM\n"); err = -ENODEV; - goto out_release_mem_region; + goto return_error; } break; #else pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); err = -EINVAL; - goto out_release_mem_region; + goto return_error; #endif case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: @@ -1926,13 +1930,13 @@ static int omap_nand_probe(struct platform_device *pdev) if (!nand_chip->ecc.priv) { pr_err("nand: error: unable to use s/w BCH library\n"); err = -EINVAL; - goto out_release_mem_region; + goto return_error; } break; #else pr_err("nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled\n"); err = -EINVAL; - goto out_release_mem_region; + goto return_error; #endif case OMAP_ECC_BCH8_CODE_HW: @@ -1951,7 +1955,7 @@ static int omap_nand_probe(struct platform_device *pdev) /* This ECC scheme requires ELM H/W block */ if (is_elm_present(info, pdata->elm_of_node, BCH8_ECC) < 0) { pr_err("nand: error: could not initialize ELM\n"); - goto out_release_mem_region; + goto return_error; } /* define ECC layout */ ecclayout->eccbytes = nand_chip->ecc.bytes * @@ -1964,13 +1968,13 @@ static int omap_nand_probe(struct platform_device *pdev) #else pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); err = -EINVAL; - goto out_release_mem_region; + goto return_error; #endif default: pr_err("nand: error: invalid or unsupported ECC scheme\n"); err = -EINVAL; - goto out_release_mem_region; + goto return_error; } /* populate remaining ECC layout data */ @@ -1983,13 +1987,13 @@ static int omap_nand_probe(struct platform_device *pdev) pr_err("not enough OOB bytes required = %d, available=%d\n", ecclayout->eccbytes, mtd->oobsize); err = -EINVAL; - goto out_release_mem_region; + goto return_error; } /* second phase scan */ if (nand_scan_tail(mtd)) { err = -ENXIO; - goto out_release_mem_region; + goto return_error; } ppdata.of_node = pdata->of_node; @@ -2000,21 +2004,13 @@ static int omap_nand_probe(struct platform_device *pdev) return 0; -out_release_mem_region: +return_error: if (info->dma) dma_release_channel(info->dma); - if (info->gpmc_irq_count > 0) - free_irq(info->gpmc_irq_count, info); - if (info->gpmc_irq_fifo > 0) - free_irq(info->gpmc_irq_fifo, info); - release_mem_region(info->phys_base, info->mem_size); -out_free_info: if (nand_chip->ecc.priv) { nand_bch_free(nand_chip->ecc.priv); nand_chip->ecc.priv = NULL; } - kfree(info); - return err; } @@ -2028,20 +2024,9 @@ static int omap_nand_remove(struct platform_device *pdev) nand_bch_free(nand_chip->ecc.priv); nand_chip->ecc.priv = NULL; } - if (info->dma) dma_release_channel(info->dma); - - if (info->gpmc_irq_count > 0) - free_irq(info->gpmc_irq_count, info); - if (info->gpmc_irq_fifo > 0) - free_irq(info->gpmc_irq_fifo, info); - - /* Release NAND device, its internal structures and partitions */ nand_release(mtd); - iounmap(nand_chip->IO_ADDR_R); - release_mem_region(info->phys_base, info->mem_size); - kfree(info); return 0; } -- cgit v1.2.3 From 90c9c955db75f4f85db1f6b4fe17fbc3bcd513b3 Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:26 +0530 Subject: mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig With OMAP NAND driver updates, selection of ecc-scheme: *DT enabled kernel* depends on ti,nand-ecc-opt and ti,elm-id DT bindings. *Non DT enabled kernel* depends on elm_dev and ecc-scheme passed along with platform-data from board file. So, selection of ecc-scheme (BCH8 or BCH4) from KConfig can be removed Signed-off-by: Pekon Gupta Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/nand/Kconfig | 40 ++++++---------------------------------- 1 file changed, 6 insertions(+), 34 deletions(-) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index d88529841d3f..93ae6a6d94f7 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -96,43 +96,15 @@ config MTD_NAND_OMAP2 config MTD_NAND_OMAP_BCH depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3 - tristate "Enable support for hardware BCH error correction" + tristate "Support hardware based BCH error correction" default n select BCH - select BCH_CONST_PARAMS help - Support for hardware BCH error correction. - -choice - prompt "BCH error correction capability" - depends on MTD_NAND_OMAP_BCH - -config MTD_NAND_OMAP_BCH8 - bool "8 bits / 512 bytes (recommended)" - help - Support correcting up to 8 bitflips per 512-byte block. - This will use 13 bytes of spare area per 512 bytes of page data. - This is the recommended mode, as 4-bit mode does not work - on some OMAP3 revisions, due to a hardware bug. - -config MTD_NAND_OMAP_BCH4 - bool "4 bits / 512 bytes" - help - Support correcting up to 4 bitflips per 512-byte block. - This will use 7 bytes of spare area per 512 bytes of page data. - Note that this mode does not work on some OMAP3 revisions, due to a - hardware bug. Please check your OMAP datasheet before selecting this - mode. - -endchoice - -if MTD_NAND_OMAP_BCH -config BCH_CONST_M - default 13 -config BCH_CONST_T - default 4 if MTD_NAND_OMAP_BCH4 - default 8 if MTD_NAND_OMAP_BCH8 -endif + This config enables the ELM hardware engine, which can be used to + locate and correct errors when using BCH ECC scheme. This offloads + the cpu from doing ECC error searching and correction. However some + legacy OMAP families like OMAP2xxx, OMAP3xxx do not have ELM engine + so they should not enable this config symbol. config MTD_NAND_IDS tristate -- cgit v1.2.3 From 5ff14821a37c92d139181c3fbc939afa993b959f Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 23 Oct 2013 13:38:09 -0700 Subject: mtd: m25p80: add support for Macronix mx25l3255e A new 32Mbit SPI NOR flash from Macronix. Nothing special. Signed-off-by: Brian Norris Reviewed-by: Marek Vasut --- drivers/mtd/devices/m25p80.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index a1dc49a6f84f..58978892c321 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -769,6 +769,7 @@ static const struct spi_device_id m25p_ids[] = { { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) }, { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) }, { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, 0) }, + { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) }, { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) }, { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, -- cgit v1.2.3 From ca5295f48b25ee58fd9de8830fe4016d1d45eb0a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 30 Oct 2013 13:34:22 +0800 Subject: mtd: remove duplicated include from mtdcore.c Remove duplicated include. Signed-off-by: Wei Yongjun Acked-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/mtdcore.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 7189089d87e3..92311a56939f 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From d367e37e004ca6847d5503781d218a266e8bc1ef Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 18 Oct 2013 16:16:35 +0530 Subject: mtd: mxc_nand: Include linux/of.h header 'of_match_ptr' is defined in linux/of.h. Include it explicitly to avoid build breakage in the future. Signed-off-by: Sachin Kamat Signed-off-by: Brian Norris --- drivers/mtd/nand/mxc_nand.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index ce8242b6c3e7..103775525c53 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From 9650b9bec61d861b6b59d09eb389410b05d196e4 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Sun, 27 Oct 2013 15:42:12 -0700 Subject: mtd: m25p80: fixup device removal failure path Device removal should fail if MTD unregistration fails. Signed-off-by: Brian Norris Reviewed-by: Marek Vasut --- drivers/mtd/devices/m25p80.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 58978892c321..7eda71dbc183 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -1125,9 +1125,7 @@ static int m25p_remove(struct spi_device *spi) struct m25p *flash = spi_get_drvdata(spi); /* Clean up MTD stuff. */ - mtd_device_unregister(&flash->mtd); - - return 0; + return mtd_device_unregister(&flash->mtd); } -- cgit v1.2.3 From 5961ad2cb4dd14933889f5219e0d8505669d752d Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 30 Oct 2013 00:41:30 -0400 Subject: mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES Now that the last user of NAND_BBT_SCANALLPAGES has been removed, let's kill this peculiar BBT feature flag. Signed-off-by: Brian Norris Reviewed-by: Ezequiel Garcia Signed-off-by: Artem Bityutskiy --- Documentation/DocBook/mtdnand.tmpl | 2 -- drivers/mtd/nand/nand_bbt.c | 37 +++---------------------------------- include/linux/mtd/bbm.h | 2 -- 3 files changed, 3 insertions(+), 38 deletions(-) diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index a248f42a121e..cd11926e07c7 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -1222,8 +1222,6 @@ in this page #define NAND_BBT_VERSION 0x00000100 /* Create a bbt if none axists */ #define NAND_BBT_CREATE 0x00000200 -/* Search good / bad pattern through all pages of a block */ -#define NAND_BBT_SCANALLPAGES 0x00000400 /* Write bbt if neccecary */ #define NAND_BBT_WRITE 0x00001000 /* Read and write back block contents when writing bbt */ diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index c75b6a7c6ea4..c0615d1526f9 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -412,25 +412,6 @@ static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf, } } -/* Scan a given block full */ -static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd, - loff_t offs, uint8_t *buf, size_t readlen, - int scanlen, int numpages) -{ - int ret, j; - - ret = scan_read_oob(mtd, buf, offs, readlen); - /* Ignore ECC errors when checking for BBM */ - if (ret && !mtd_is_bitflip_or_eccerr(ret)) - return ret; - - for (j = 0; j < numpages; j++, buf += scanlen) { - if (check_pattern(buf, scanlen, mtd->writesize, bd)) - return 1; - } - return 0; -} - /* Scan a given block partially */ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd, loff_t offs, uint8_t *buf, int numpages) @@ -477,24 +458,17 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip) { struct nand_chip *this = mtd->priv; - int i, numblocks, numpages, scanlen; + int i, numblocks, numpages; int startblock; loff_t from; - size_t readlen; pr_info("Scanning device for bad blocks\n"); - if (bd->options & NAND_BBT_SCANALLPAGES) - numpages = 1 << (this->bbt_erase_shift - this->page_shift); - else if (bd->options & NAND_BBT_SCAN2NDPAGE) + if (bd->options & NAND_BBT_SCAN2NDPAGE) numpages = 2; else numpages = 1; - /* We need only read few bytes from the OOB area */ - scanlen = 0; - readlen = bd->len; - if (chip == -1) { numblocks = mtd->size >> this->bbt_erase_shift; startblock = 0; @@ -519,12 +493,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, BUG_ON(bd->options & NAND_BBT_NO_OOB); - if (bd->options & NAND_BBT_SCANALLPAGES) - ret = scan_block_full(mtd, bd, from, buf, readlen, - scanlen, numpages); - else - ret = scan_block_fast(mtd, bd, from, buf, numpages); - + ret = scan_block_fast(mtd, bd, from, buf, numpages); if (ret < 0) return ret; diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h index 95fc482cef36..36bb6a503f19 100644 --- a/include/linux/mtd/bbm.h +++ b/include/linux/mtd/bbm.h @@ -91,8 +91,6 @@ struct nand_bbt_descr { * with NAND_BBT_CREATE. */ #define NAND_BBT_CREATE_EMPTY 0x00000400 -/* Search good / bad pattern through all pages of a block */ -#define NAND_BBT_SCANALLPAGES 0x00000800 /* Write bbt if neccecary */ #define NAND_BBT_WRITE 0x00002000 /* Read and write back block contents when writing bbt */ -- cgit v1.2.3 From 9211439b8a933a624d770113d0e0aa742db2ec67 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 1 Nov 2013 08:16:18 +0800 Subject: mtd: nand: omap: fix error return code in omap_nand_probe() Fix to return a negative error code from the error handling case instead of 0, to more closely match the rest of this function. Signed-off-by: Wei Yongjun Acked-by: Ezequiel Garcia Acked-by: Pekon Gupta Signed-off-by: Brian Norris --- drivers/mtd/nand/omap2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index ec40b8d10201..f77725009907 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1953,7 +1953,8 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; /* This ECC scheme requires ELM H/W block */ - if (is_elm_present(info, pdata->elm_of_node, BCH8_ECC) < 0) { + err = is_elm_present(info, pdata->elm_of_node, BCH8_ECC); + if (err < 0) { pr_err("nand: error: could not initialize ELM\n"); goto return_error; } -- cgit v1.2.3 From cb85b7e7a0605de2de139d2c293ff10affc8a81c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 16 Oct 2013 13:16:14 +0100 Subject: mtd: dataflash: Say if we find a device we don't support Ensure that the error message if we identify a flash we don't know how to talk to is displayed on the console in order to aid diagnostics. While we're at convert the message to use dev_info() rather than our hand rolled version of it for consistency. Signed-off-by: Mark Brown Signed-off-by: Brian Norris --- drivers/mtd/devices/mtd_dataflash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 1cfbfcfb6e19..4a47b0266d4e 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -879,7 +879,7 @@ static int dataflash_probe(struct spi_device *spi) break; /* obsolete AT45DB1282 not (yet?) supported */ default: - pr_debug("%s: unsupported device (%x)\n", dev_name(&spi->dev), + dev_info(&spi->dev, "unsupported device (%x)\n", status & 0x3c); status = -ENODEV; } -- cgit v1.2.3 From b1eb234fb38dd1b6fb86969bf8f27348e4ec4c74 Mon Sep 17 00:00:00 2001 From: Michael Opdenacker Date: Sun, 13 Oct 2013 08:21:32 +0200 Subject: mtd: nand: remove deprecated IRQF_DISABLED This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker Signed-off-by: Brian Norris --- drivers/mtd/nand/mxc_nand.c | 2 +- drivers/mtd/nand/pxa3xx_nand.c | 3 +-- drivers/mtd/nand/tmio_nand.c | 3 +-- 3 files changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 103775525c53..4edea7f4462f 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -1508,7 +1508,7 @@ static int mxcnd_probe(struct platform_device *pdev) host->devtype_data->irq_control(host, 0); err = devm_request_irq(&pdev->dev, host->irq, mxc_nfc_irq, - IRQF_DISABLED, DRIVER_NAME, host); + 0, DRIVER_NAME, host); if (err) return err; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 64c258ec0170..4cabdc9fda90 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1213,8 +1213,7 @@ static int alloc_nand_resource(struct platform_device *pdev) /* initialize all interrupts to be disabled */ disable_int(info, NDSR_MASK); - ret = request_irq(irq, pxa3xx_nand_irq, IRQF_DISABLED, - pdev->name, info); + ret = request_irq(irq, pxa3xx_nand_irq, 0, pdev->name, info); if (ret < 0) { dev_err(&pdev->dev, "failed to request IRQ\n"); goto fail_free_buf; diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index 396530d87ecf..a3747c914d57 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -428,8 +428,7 @@ static int tmio_probe(struct platform_device *dev) /* 15 us command delay time */ nand_chip->chip_delay = 15; - retval = request_irq(irq, &tmio_irq, - IRQF_DISABLED, dev_name(&dev->dev), tmio); + retval = request_irq(irq, &tmio_irq, 0, dev_name(&dev->dev), tmio); if (retval) { dev_err(&dev->dev, "request_irq error %d\n", retval); goto err_irq; -- cgit v1.2.3 From 97de79e02d5e85b4a147b74cc2947b8613d806f7 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 18 Oct 2013 14:20:53 +0800 Subject: mtd: nand: use a local variable to simplify the nand_scan_tail There are too many "chip->ecc" in the nand_scan_tail() which makes the eyes sore. This patch uses a local variable "ecc" to replace the "chip->ecc" to make the code more graceful. Do the code change with "s/chip->ecc\./ecc->/g" in the nand_scan_tail, and also change some lines by hand. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/nand_base.c | 213 +++++++++++++++++++++---------------------- 1 file changed, 104 insertions(+), 109 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ec1db1e19c05..bd39f7b67906 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3558,6 +3558,7 @@ int nand_scan_tail(struct mtd_info *mtd) { int i; struct nand_chip *chip = mtd->priv; + struct nand_ecc_ctrl *ecc = &chip->ecc; /* New bad blocks should be marked in OOB, flash-based BBT, or both */ BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && @@ -3574,19 +3575,19 @@ int nand_scan_tail(struct mtd_info *mtd) /* * If no default placement scheme is given, select an appropriate one. */ - if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) { + if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) { switch (mtd->oobsize) { case 8: - chip->ecc.layout = &nand_oob_8; + ecc->layout = &nand_oob_8; break; case 16: - chip->ecc.layout = &nand_oob_16; + ecc->layout = &nand_oob_16; break; case 64: - chip->ecc.layout = &nand_oob_64; + ecc->layout = &nand_oob_64; break; case 128: - chip->ecc.layout = &nand_oob_128; + ecc->layout = &nand_oob_128; break; default: pr_warn("No oob scheme defined for oobsize %d\n", @@ -3603,64 +3604,62 @@ int nand_scan_tail(struct mtd_info *mtd) * selected and we have 256 byte pagesize fallback to software ECC */ - switch (chip->ecc.mode) { + switch (ecc->mode) { case NAND_ECC_HW_OOB_FIRST: /* Similar to NAND_ECC_HW, but a separate read_page handle */ - if (!chip->ecc.calculate || !chip->ecc.correct || - !chip->ecc.hwctl) { + if (!ecc->calculate || !ecc->correct || !ecc->hwctl) { pr_warn("No ECC functions supplied; " "hardware ECC not possible\n"); BUG(); } - if (!chip->ecc.read_page) - chip->ecc.read_page = nand_read_page_hwecc_oob_first; + if (!ecc->read_page) + ecc->read_page = nand_read_page_hwecc_oob_first; case NAND_ECC_HW: /* Use standard hwecc read page function? */ - if (!chip->ecc.read_page) - chip->ecc.read_page = nand_read_page_hwecc; - if (!chip->ecc.write_page) - chip->ecc.write_page = nand_write_page_hwecc; - if (!chip->ecc.read_page_raw) - chip->ecc.read_page_raw = nand_read_page_raw; - if (!chip->ecc.write_page_raw) - chip->ecc.write_page_raw = nand_write_page_raw; - if (!chip->ecc.read_oob) - chip->ecc.read_oob = nand_read_oob_std; - if (!chip->ecc.write_oob) - chip->ecc.write_oob = nand_write_oob_std; - if (!chip->ecc.read_subpage) - chip->ecc.read_subpage = nand_read_subpage; - if (!chip->ecc.write_subpage) - chip->ecc.write_subpage = nand_write_subpage_hwecc; + if (!ecc->read_page) + ecc->read_page = nand_read_page_hwecc; + if (!ecc->write_page) + ecc->write_page = nand_write_page_hwecc; + if (!ecc->read_page_raw) + ecc->read_page_raw = nand_read_page_raw; + if (!ecc->write_page_raw) + ecc->write_page_raw = nand_write_page_raw; + if (!ecc->read_oob) + ecc->read_oob = nand_read_oob_std; + if (!ecc->write_oob) + ecc->write_oob = nand_write_oob_std; + if (!ecc->read_subpage) + ecc->read_subpage = nand_read_subpage; + if (!ecc->write_subpage) + ecc->write_subpage = nand_write_subpage_hwecc; case NAND_ECC_HW_SYNDROME: - if ((!chip->ecc.calculate || !chip->ecc.correct || - !chip->ecc.hwctl) && - (!chip->ecc.read_page || - chip->ecc.read_page == nand_read_page_hwecc || - !chip->ecc.write_page || - chip->ecc.write_page == nand_write_page_hwecc)) { + if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) && + (!ecc->read_page || + ecc->read_page == nand_read_page_hwecc || + !ecc->write_page || + ecc->write_page == nand_write_page_hwecc)) { pr_warn("No ECC functions supplied; " "hardware ECC not possible\n"); BUG(); } /* Use standard syndrome read/write page function? */ - if (!chip->ecc.read_page) - chip->ecc.read_page = nand_read_page_syndrome; - if (!chip->ecc.write_page) - chip->ecc.write_page = nand_write_page_syndrome; - if (!chip->ecc.read_page_raw) - chip->ecc.read_page_raw = nand_read_page_raw_syndrome; - if (!chip->ecc.write_page_raw) - chip->ecc.write_page_raw = nand_write_page_raw_syndrome; - if (!chip->ecc.read_oob) - chip->ecc.read_oob = nand_read_oob_syndrome; - if (!chip->ecc.write_oob) - chip->ecc.write_oob = nand_write_oob_syndrome; - - if (mtd->writesize >= chip->ecc.size) { - if (!chip->ecc.strength) { + if (!ecc->read_page) + ecc->read_page = nand_read_page_syndrome; + if (!ecc->write_page) + ecc->write_page = nand_write_page_syndrome; + if (!ecc->read_page_raw) + ecc->read_page_raw = nand_read_page_raw_syndrome; + if (!ecc->write_page_raw) + ecc->write_page_raw = nand_write_page_raw_syndrome; + if (!ecc->read_oob) + ecc->read_oob = nand_read_oob_syndrome; + if (!ecc->write_oob) + ecc->write_oob = nand_write_oob_syndrome; + + if (mtd->writesize >= ecc->size) { + if (!ecc->strength) { pr_warn("Driver must set ecc.strength when using hardware ECC\n"); BUG(); } @@ -3668,23 +3667,23 @@ int nand_scan_tail(struct mtd_info *mtd) } pr_warn("%d byte HW ECC not possible on " "%d byte page size, fallback to SW ECC\n", - chip->ecc.size, mtd->writesize); - chip->ecc.mode = NAND_ECC_SOFT; + ecc->size, mtd->writesize); + ecc->mode = NAND_ECC_SOFT; case NAND_ECC_SOFT: - chip->ecc.calculate = nand_calculate_ecc; - chip->ecc.correct = nand_correct_data; - chip->ecc.read_page = nand_read_page_swecc; - chip->ecc.read_subpage = nand_read_subpage; - chip->ecc.write_page = nand_write_page_swecc; - chip->ecc.read_page_raw = nand_read_page_raw; - chip->ecc.write_page_raw = nand_write_page_raw; - chip->ecc.read_oob = nand_read_oob_std; - chip->ecc.write_oob = nand_write_oob_std; - if (!chip->ecc.size) - chip->ecc.size = 256; - chip->ecc.bytes = 3; - chip->ecc.strength = 1; + ecc->calculate = nand_calculate_ecc; + ecc->correct = nand_correct_data; + ecc->read_page = nand_read_page_swecc; + ecc->read_subpage = nand_read_subpage; + ecc->write_page = nand_write_page_swecc; + ecc->read_page_raw = nand_read_page_raw; + ecc->write_page_raw = nand_write_page_raw; + ecc->read_oob = nand_read_oob_std; + ecc->write_oob = nand_write_oob_std; + if (!ecc->size) + ecc->size = 256; + ecc->bytes = 3; + ecc->strength = 1; break; case NAND_ECC_SOFT_BCH: @@ -3692,87 +3691,83 @@ int nand_scan_tail(struct mtd_info *mtd) pr_warn("CONFIG_MTD_ECC_BCH not enabled\n"); BUG(); } - chip->ecc.calculate = nand_bch_calculate_ecc; - chip->ecc.correct = nand_bch_correct_data; - chip->ecc.read_page = nand_read_page_swecc; - chip->ecc.read_subpage = nand_read_subpage; - chip->ecc.write_page = nand_write_page_swecc; - chip->ecc.read_page_raw = nand_read_page_raw; - chip->ecc.write_page_raw = nand_write_page_raw; - chip->ecc.read_oob = nand_read_oob_std; - chip->ecc.write_oob = nand_write_oob_std; + ecc->calculate = nand_bch_calculate_ecc; + ecc->correct = nand_bch_correct_data; + ecc->read_page = nand_read_page_swecc; + ecc->read_subpage = nand_read_subpage; + ecc->write_page = nand_write_page_swecc; + ecc->read_page_raw = nand_read_page_raw; + ecc->write_page_raw = nand_write_page_raw; + ecc->read_oob = nand_read_oob_std; + ecc->write_oob = nand_write_oob_std; /* * Board driver should supply ecc.size and ecc.bytes values to * select how many bits are correctable; see nand_bch_init() * for details. Otherwise, default to 4 bits for large page * devices. */ - if (!chip->ecc.size && (mtd->oobsize >= 64)) { - chip->ecc.size = 512; - chip->ecc.bytes = 7; + if (!ecc->size && (mtd->oobsize >= 64)) { + ecc->size = 512; + ecc->bytes = 7; } - chip->ecc.priv = nand_bch_init(mtd, - chip->ecc.size, - chip->ecc.bytes, - &chip->ecc.layout); - if (!chip->ecc.priv) { + ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes, + &ecc->layout); + if (!ecc->priv) { pr_warn("BCH ECC initialization failed!\n"); BUG(); } - chip->ecc.strength = - chip->ecc.bytes * 8 / fls(8 * chip->ecc.size); + ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size); break; case NAND_ECC_NONE: pr_warn("NAND_ECC_NONE selected by board driver. " "This is not recommended!\n"); - chip->ecc.read_page = nand_read_page_raw; - chip->ecc.write_page = nand_write_page_raw; - chip->ecc.read_oob = nand_read_oob_std; - chip->ecc.read_page_raw = nand_read_page_raw; - chip->ecc.write_page_raw = nand_write_page_raw; - chip->ecc.write_oob = nand_write_oob_std; - chip->ecc.size = mtd->writesize; - chip->ecc.bytes = 0; - chip->ecc.strength = 0; + ecc->read_page = nand_read_page_raw; + ecc->write_page = nand_write_page_raw; + ecc->read_oob = nand_read_oob_std; + ecc->read_page_raw = nand_read_page_raw; + ecc->write_page_raw = nand_write_page_raw; + ecc->write_oob = nand_write_oob_std; + ecc->size = mtd->writesize; + ecc->bytes = 0; + ecc->strength = 0; break; default: - pr_warn("Invalid NAND_ECC_MODE %d\n", chip->ecc.mode); + pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode); BUG(); } /* For many systems, the standard OOB write also works for raw */ - if (!chip->ecc.read_oob_raw) - chip->ecc.read_oob_raw = chip->ecc.read_oob; - if (!chip->ecc.write_oob_raw) - chip->ecc.write_oob_raw = chip->ecc.write_oob; + if (!ecc->read_oob_raw) + ecc->read_oob_raw = ecc->read_oob; + if (!ecc->write_oob_raw) + ecc->write_oob_raw = ecc->write_oob; /* * The number of bytes available for a client to place data into * the out of band area. */ - chip->ecc.layout->oobavail = 0; - for (i = 0; chip->ecc.layout->oobfree[i].length - && i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++) - chip->ecc.layout->oobavail += - chip->ecc.layout->oobfree[i].length; - mtd->oobavail = chip->ecc.layout->oobavail; + ecc->layout->oobavail = 0; + for (i = 0; ecc->layout->oobfree[i].length + && i < ARRAY_SIZE(ecc->layout->oobfree); i++) + ecc->layout->oobavail += ecc->layout->oobfree[i].length; + mtd->oobavail = ecc->layout->oobavail; /* * Set the number of read / write steps for one page depending on ECC * mode. */ - chip->ecc.steps = mtd->writesize / chip->ecc.size; - if (chip->ecc.steps * chip->ecc.size != mtd->writesize) { + ecc->steps = mtd->writesize / ecc->size; + if (ecc->steps * ecc->size != mtd->writesize) { pr_warn("Invalid ECC parameters\n"); BUG(); } - chip->ecc.total = chip->ecc.steps * chip->ecc.bytes; + ecc->total = ecc->steps * ecc->bytes; /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { - switch (chip->ecc.steps) { + switch (ecc->steps) { case 2: mtd->subpage_sft = 1; break; @@ -3792,7 +3787,7 @@ int nand_scan_tail(struct mtd_info *mtd) chip->pagebuf = -1; /* Large page NAND with SOFT_ECC should support subpage reads */ - if ((chip->ecc.mode == NAND_ECC_SOFT) && (chip->page_shift > 9)) + if ((ecc->mode == NAND_ECC_SOFT) && (chip->page_shift > 9)) chip->options |= NAND_SUBPAGE_READ; /* Fill in remaining MTD driver data */ @@ -3817,9 +3812,9 @@ int nand_scan_tail(struct mtd_info *mtd) mtd->writebufsize = mtd->writesize; /* propagate ecc info to mtd_info */ - mtd->ecclayout = chip->ecc.layout; - mtd->ecc_strength = chip->ecc.strength; - mtd->ecc_step_size = chip->ecc.size; + mtd->ecclayout = ecc->layout; + mtd->ecc_strength = ecc->strength; + mtd->ecc_step_size = ecc->size; /* * Initialize bitflip_threshold to its default prior scan_bbt() call. * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be -- cgit v1.2.3 From a749d13acd8e079ed4c77a9456d842dc94af8f17 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Tue, 5 Nov 2013 17:59:07 +0800 Subject: mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected In the atmel driver probe function, the code shows like following: atmel_nand_probe(...) { ... err_nand_ioremap: platform_driver_unregister(&atmel_nand_nfc_driver); return res; } If no nand flash detected, the driver probe function will goto err_nand_ioremap label. Then platform_driver_unregister() will be called. It will get the lock of atmel_nand device since it is parent of nfc_device. The problem is the lock is already hold by atmel_nand_probe itself. So system will be in a dead lock. This patch just simply removed to platform_driver_unregister() call. When atmel_nand driver is quit the platform_driver_unregister() will be called in atmel_nand_remove(). [Brian: the NAND platform probe really has no business registering/unregistering another driver; this fixes the deadlock, but we should follow up the likely racy behavior here with a better architecture] Signed-off-by: Josh Wu Cc: # 3.12 Signed-off-by: Brian Norris --- drivers/mtd/nand/atmel_nand.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index ef9c9f547c01..469d4e2c450a 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -2142,7 +2142,6 @@ err_no_card: if (host->dma_chan) dma_release_channel(host->dma_chan); err_nand_ioremap: - platform_driver_unregister(&atmel_nand_nfc_driver); return res; } -- cgit v1.2.3 From edaf4d4aad61134e820c0431cbe3d319794899f9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 5 Nov 2013 00:07:05 -0200 Subject: mtd: gpmi: Use devm_kzalloc() Using devm_kzalloc() can make the code simpler. Signed-off-by: Fabio Estevam Acked-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 7ac22802e4dc..4b6d802018fb 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1732,7 +1732,7 @@ static int gpmi_nand_probe(struct platform_device *pdev) return -ENODEV; } - this = kzalloc(sizeof(*this), GFP_KERNEL); + this = devm_kzalloc(&pdev->dev, sizeof(*this), GFP_KERNEL); if (!this) { pr_err("Failed to allocate per-device memory\n"); return -ENOMEM; @@ -1762,7 +1762,6 @@ exit_nfc_init: release_resources(this); exit_acquire_resources: dev_err(this->dev, "driver registration failed: %d\n", ret); - kfree(this); return ret; } @@ -1773,7 +1772,6 @@ static int gpmi_nand_remove(struct platform_device *pdev) gpmi_nfc_exit(this); release_resources(this); - kfree(this); return 0; } -- cgit v1.2.3 From 80bd33acdaa21fafa8ff4391ccdf879d227111bb Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Thu, 7 Nov 2013 17:46:37 +0800 Subject: mtd: gpmi: only scan two chips for imx6 We cannot scan two chips for imx23 and imx28: imx23: the Ready-Busy1 line is not connected for some board. imx28: we do not set the pinctrl for Ready-Busy1 So we only scan two chips for imx6. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 4b6d802018fb..3d642b5c3a79 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1674,7 +1674,7 @@ static int gpmi_nfc_init(struct gpmi_nand_data *this) if (ret) goto err_out; - ret = nand_scan_ident(mtd, 2, NULL); + ret = nand_scan_ident(mtd, GPMI_IS_MX6Q(this) ? 2 : 1, NULL); if (ret) goto err_out; -- cgit v1.2.3 From b99959323732ed0c81da2488252f64c02ad37fbe Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 28 Oct 2013 18:08:15 +0200 Subject: mtd: mtdchar: return expected errors on mmap() call According both to POSIX.1-2008 and Linux Programmer's Manual mmap() syscall shouldn't return undocumented ENOSYS, this change replaces the errno with more appropriate ENODEV and EACCESS. Signed-off-by: Vladimir Zapolskiy Cc: David Woodhouse Signed-off-by: Brian Norris --- drivers/mtd/mtdchar.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 9aa0c5e49c1d..2147e733533b 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -1100,7 +1100,7 @@ static unsigned long mtdchar_get_unmapped_area(struct file *file, return (unsigned long) -EINVAL; ret = mtd_get_unmapped_area(mtd, len, offset, flags); - return ret == -EOPNOTSUPP ? -ENOSYS : ret; + return ret == -EOPNOTSUPP ? -ENODEV : ret; } #endif @@ -1125,9 +1125,9 @@ static int mtdchar_mmap(struct file *file, struct vm_area_struct *vma) #endif return vm_iomap_memory(vma, map->phys, map->size); } - return -ENOSYS; + return -ENODEV; #else - return vma->vm_flags & VM_SHARED ? 0 : -ENOSYS; + return vma->vm_flags & VM_SHARED ? 0 : -EACCES; #endif } -- cgit v1.2.3 From 7b3d2fb92067bcb29f0f085a9fa9fa64920a6646 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Mon, 11 Nov 2013 12:13:45 +0800 Subject: mtd: gpmi: fix kernel BUG due to racing DMA operations [1] The gpmi uses the nand_command_lp to issue the commands to NAND chips. The gpmi issues a DMA operation with gpmi_cmd_ctrl when it handles a NAND_CMD_NONE control command. So when we read a page(NAND_CMD_READ0) from the NAND, we may send two DMA operations back-to-back. If we do not serialize the two DMA operations, we will meet a bug when 1.1) we enable CONFIG_DMA_API_DEBUG, CONFIG_DMADEVICES_DEBUG, and CONFIG_DEBUG_SG. 1.2) Use the following commands in an UART console and a SSH console: cmd 1: while true;do dd if=/dev/mtd0 of=/dev/null;done cmd 1: while true;do dd if=/dev/mmcblk0 of=/dev/null;done The kernel log shows below: ----------------------------------------------------------------- kernel BUG at lib/scatterlist.c:28! Unable to handle kernel NULL pointer dereference at virtual address 00000000 ......................... [<80044a0c>] (__bug+0x18/0x24) from [<80249b74>] (sg_next+0x48/0x4c) [<80249b74>] (sg_next+0x48/0x4c) from [<80255398>] (debug_dma_unmap_sg+0x170/0x1a4) [<80255398>] (debug_dma_unmap_sg+0x170/0x1a4) from [<8004af58>] (dma_unmap_sg+0x14/0x6c) [<8004af58>] (dma_unmap_sg+0x14/0x6c) from [<8027e594>] (mxs_dma_tasklet+0x18/0x1c) [<8027e594>] (mxs_dma_tasklet+0x18/0x1c) from [<8007d444>] (tasklet_action+0x114/0x164) ----------------------------------------------------------------- 1.3) Assume the two DMA operations is X (first) and Y (second). The root cause of the bug: Assume process P issues DMA X, and sleep on the completion @this->dma_done. X's tasklet callback is dma_irq_callback. It firstly wake up the process sleeping on the completion @this->dma_done, and then trid to unmap the scatterlist S. The waked process P will issue Y in another ARM core. Y initializes S->sg_magic to zero with sg_init_one(), while dma_irq_callback is unmapping S at the same time. See the diagram: ARM core 0 | ARM core 1 ------------------------------------------------------------- (P issues DMA X, then sleep) --> | | (X's tasklet wakes P) --> | | | <-- (P begin to issue DMA Y) | (X's tasklet unmap the | scatterlist S with dma_unmap_sg) --> | <-- (Y calls sg_init_one() to init | scatterlist S) | [2] This patch serialize both the X and Y in the following way: Unmap the DMA scatterlist S firstly, and wake up the process at the end of the DMA callback, in such a way, Y will be executed after X. After this patch: ARM core 0 | ARM core 1 ------------------------------------------------------------- (P issues DMA X, then sleep) --> | | (X's tasklet unmap the | scatterlist S with dma_unmap_sg) --> | | (X's tasklet wakes P) --> | | | <-- (P begin to issue DMA Y) | | <-- (Y calls sg_init_one() to init | scatterlist S) | Cc: stable@vger.kernel.org # 3.2 Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 3d642b5c3a79..c7243dca90fd 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -394,8 +394,6 @@ static void dma_irq_callback(void *param) struct gpmi_nand_data *this = param; struct completion *dma_c = &this->dma_done; - complete(dma_c); - switch (this->dma_type) { case DMA_FOR_COMMAND: dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE); @@ -420,6 +418,8 @@ static void dma_irq_callback(void *param) default: pr_err("in wrong DMA operation.\n"); } + + complete(dma_c); } int start_dma_without_bch_irq(struct gpmi_nand_data *this, -- cgit v1.2.3 From 885d71e5838f68d5dbee92ab952cc90ad6c1dc6b Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Tue, 12 Nov 2013 12:23:08 +0800 Subject: mtd: gpmi: fix the NULL pointer The imx23 board will check the fingerprint, so it will call the mx23_check_transcription_stamp. This function will use @chip->buffers->databuf as its buffer which is allocated in the nand_scan_tail(). Unfortunately, the mx23_check_transcription_stamp is called before the nand_scan_tail(). So we will meet a NULL pointer bug: -------------------------------------------------------------------- [ 1.150000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd7 (Samsung NAND 4GiB 3,3V 8-bit), 4096MiB, page size: 4096, OOB size: 8 [ 1.160000] Unable to handle kernel NULL pointer dereference at virtual address 000005d0 [ 1.170000] pgd = c0004000 [ 1.170000] [000005d0] *pgd=00000000 [ 1.180000] Internal error: Oops: 5 [#1] ARM [ 1.180000] Modules linked in: [ 1.180000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0 #89 [ 1.180000] task: c7440000 ti: c743a000 task.ti: c743a000 [ 1.180000] PC is at memcmp+0x10/0x54 [ 1.180000] LR is at gpmi_nand_probe+0x42c/0x894 [ 1.180000] pc : [] lr : [] psr: 20000053 [ 1.180000] sp : c743be2c ip : 600000d3 fp : ffffffff [ 1.180000] r10: 000005d0 r9 : c02f5f08 r8 : 00000000 [ 1.180000] r7 : c75858a8 r6 : c75858a8 r5 : c7585b18 r4 : c7585800 [ 1.180000] r3 : 000005d0 r2 : 00000004 r1 : c05c33e4 r0 : 000005d0 [ 1.180000] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel [ 1.180000] Control: 0005317f Table: 40004000 DAC: 00000017 [ 1.180000] Process swapper (pid: 1, stack limit = 0xc743a1c0) -------------------------------------------------------------------- This patch rearrange the init procedure: Set the NAND_SKIP_BBTSCAN to skip the nand scan firstly, and after we set the proper settings, we will call the chip->scan_bbt() manually. Cc: stable@vger.kernel.org # 3.12 Signed-off-by: Huang Shijie Reported-by: Fabio Estevam Tested-by: Fabio Estevam Signed-off-by: Brian Norris --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index c7243dca90fd..dabbc14db563 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1578,8 +1578,6 @@ static int gpmi_set_geometry(struct gpmi_nand_data *this) static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this) { - int ret; - /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */ if (GPMI_IS_MX23(this)) this->swap_block_mark = false; @@ -1587,12 +1585,8 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this) this->swap_block_mark = true; /* Set up the medium geometry */ - ret = gpmi_set_geometry(this); - if (ret) - return ret; + return gpmi_set_geometry(this); - /* NAND boot init, depends on the gpmi_set_geometry(). */ - return nand_boot_init(this); } static void gpmi_nfc_exit(struct gpmi_nand_data *this) @@ -1682,10 +1676,16 @@ static int gpmi_nfc_init(struct gpmi_nand_data *this) if (ret) goto err_out; + chip->options |= NAND_SKIP_BBTSCAN; ret = nand_scan_tail(mtd); if (ret) goto err_out; + ret = nand_boot_init(this); + if (ret) + goto err_out; + chip->scan_bbt(mtd); + ppdata.of_node = this->pdev->dev.of_node; ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); if (ret) -- cgit v1.2.3