From 03ff858c09c81a659b2a90a08826bc0abdbb784c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 13 Oct 2010 07:36:38 +0000 Subject: ARM: shmobile: remove sh_timer_config clk member Now when the SH-Mobile ARM platforms have been converted to use device name it is possible to remove "clk" from struct sh_timer_config. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 10 +++------- drivers/clocksource/sh_mtu2.c | 10 +++------- drivers/clocksource/sh_tmu.c | 10 +++------- include/linux/sh_timer.h | 1 - 4 files changed, 9 insertions(+), 22 deletions(-) diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index a44611652282..d68d3aa1814b 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -616,13 +616,9 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) /* get hold of clock */ p->clk = clk_get(&p->pdev->dev, "cmt_fck"); if (IS_ERR(p->clk)) { - dev_warn(&p->pdev->dev, "using deprecated clock lookup\n"); - p->clk = clk_get(&p->pdev->dev, cfg->clk); - if (IS_ERR(p->clk)) { - dev_err(&p->pdev->dev, "cannot get clock\n"); - ret = PTR_ERR(p->clk); - goto err1; - } + dev_err(&p->pdev->dev, "cannot get clock\n"); + ret = PTR_ERR(p->clk); + goto err1; } if (resource_size(res) == 6) { diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index ef7a5be8a09f..40630cb98237 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -287,13 +287,9 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) /* get hold of clock */ p->clk = clk_get(&p->pdev->dev, "mtu2_fck"); if (IS_ERR(p->clk)) { - dev_warn(&p->pdev->dev, "using deprecated clock lookup\n"); - p->clk = clk_get(&p->pdev->dev, cfg->clk); - if (IS_ERR(p->clk)) { - dev_err(&p->pdev->dev, "cannot get clock\n"); - ret = PTR_ERR(p->clk); - goto err1; - } + dev_err(&p->pdev->dev, "cannot get clock\n"); + ret = PTR_ERR(p->clk); + goto err1; } return sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index de715901b82a..36aba9923060 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -393,13 +393,9 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) /* get hold of clock */ p->clk = clk_get(&p->pdev->dev, "tmu_fck"); if (IS_ERR(p->clk)) { - dev_warn(&p->pdev->dev, "using deprecated clock lookup\n"); - p->clk = clk_get(&p->pdev->dev, cfg->clk); - if (IS_ERR(p->clk)) { - dev_err(&p->pdev->dev, "cannot get clock\n"); - ret = PTR_ERR(p->clk); - goto err1; - } + dev_err(&p->pdev->dev, "cannot get clock\n"); + ret = PTR_ERR(p->clk); + goto err1; } return sh_tmu_register(p, (char *)dev_name(&p->pdev->dev), diff --git a/include/linux/sh_timer.h b/include/linux/sh_timer.h index 864bd56bd3b0..4d9dcd138315 100644 --- a/include/linux/sh_timer.h +++ b/include/linux/sh_timer.h @@ -5,7 +5,6 @@ struct sh_timer_config { char *name; long channel_offset; int timer_bit; - char *clk; unsigned long clockevent_rating; unsigned long clocksource_rating; }; -- cgit v1.2.3 From f2ace4a5d754c07503326d66ec85bf65e03d729d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 18 Oct 2010 03:50:39 +0000 Subject: ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh7372.c | 101 +++++++++++++++++++++++++++ arch/arm/mach-shmobile/include/mach/sh7372.h | 2 + 2 files changed, 103 insertions(+) diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 8565aefa21fd..fe7fa1550d36 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -50,6 +50,9 @@ #define SMSTPCR3 0xe615013c #define SMSTPCR4 0xe6150140 +#define FSIDIVA 0xFE1F8000 +#define FSIDIVB 0xFE1F8008 + /* Platforms must set frequency on their DV_CLKI pin */ struct clk sh7372_dv_clki_clk = { }; @@ -417,6 +420,101 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2), }; +/* FSI DIV */ +static unsigned long fsidiv_recalc(struct clk *clk) +{ + unsigned long value; + + value = __raw_readl(clk->mapping->base); + + if ((value & 0x3) != 0x3) + return 0; + + value >>= 16; + if (value < 2) + return 0; + + return clk->parent->rate / value; +} + +static long fsidiv_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_div_range_round(clk, 2, 0xffff, rate); +} + +static void fsidiv_disable(struct clk *clk) +{ + __raw_writel(0, clk->mapping->base); +} + +static int fsidiv_enable(struct clk *clk) +{ + unsigned long value; + + value = __raw_readl(clk->mapping->base) >> 16; + if (value < 2) { + fsidiv_disable(clk); + return -ENOENT; + } + + __raw_writel((value << 16) | 0x3, clk->mapping->base); + + return 0; +} + +static int fsidiv_set_rate(struct clk *clk, + unsigned long rate, int algo_id) +{ + int idx; + + if (clk->parent->rate == rate) { + fsidiv_disable(clk); + return 0; + } + + idx = (clk->parent->rate / rate) & 0xffff; + if (idx < 2) + return -ENOENT; + + __raw_writel(idx << 16, clk->mapping->base); + return fsidiv_enable(clk); +} + +static struct clk_ops fsidiv_clk_ops = { + .recalc = fsidiv_recalc, + .round_rate = fsidiv_round_rate, + .set_rate = fsidiv_set_rate, + .enable = fsidiv_enable, + .disable = fsidiv_disable, +}; + +static struct clk_mapping sh7372_fsidiva_clk_mapping = { + .phys = FSIDIVA, + .len = 8, +}; + +struct clk sh7372_fsidiva_clk = { + .ops = &fsidiv_clk_ops, + .parent = &div6_reparent_clks[DIV6_FSIA], /* late install */ + .mapping = &sh7372_fsidiva_clk_mapping, +}; + +static struct clk_mapping sh7372_fsidivb_clk_mapping = { + .phys = FSIDIVB, + .len = 8, +}; + +struct clk sh7372_fsidivb_clk = { + .ops = &fsidiv_clk_ops, + .parent = &div6_reparent_clks[DIV6_FSIB], /* late install */ + .mapping = &sh7372_fsidivb_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &sh7372_fsidiva_clk, + &sh7372_fsidivb_clk, +}; + enum { MSTP001, MSTP131, MSTP130, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, @@ -585,6 +683,9 @@ void __init sh7372_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index 147775a94bce..e4f9004e7103 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -464,5 +464,7 @@ extern struct clk sh7372_dv_clki_div2_clk; extern struct clk sh7372_pllc2_clk; extern struct clk sh7372_fsiack_clk; extern struct clk sh7372_fsibck_clk; +extern struct clk sh7372_fsidiva_clk; +extern struct clk sh7372_fsidivb_clk; #endif /* __ASM_SH7372_H__ */ -- cgit v1.2.3 From 2669efec085bfc02006a452e1b5930f28bab959b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 31 Oct 2010 10:43:14 -0400 Subject: ARM: mach-shmobile: ap4evb: Add HDMI sound support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 46 ++++++++++++++++++++++++++++++++++- 1 file changed, 45 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 46ca4d4abf91..32d9e2816e56 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -565,12 +565,50 @@ static struct platform_device *qhd_devices[] __initdata = { /* FSI */ #define IRQ_FSI evt2irq(0x1840) + +static int fsi_set_rate(int is_porta, int rate) +{ + struct clk *fsib_clk; + struct clk *fdiv_clk = &sh7372_fsidivb_clk; + int ret; + + /* set_rate is not needed if port A */ + if (is_porta) + return 0; + + fsib_clk = clk_get(NULL, "fsib_clk"); + if (IS_ERR(fsib_clk)) + return -EINVAL; + + switch (rate) { + case 48000: + clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000)); + clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000)); + ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + break; + default: + pr_err("unsupported rate in FSI2 port B\n"); + ret = -EINVAL; + break; + } + + clk_put(fsib_clk); + + return ret; +} + static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | SH_FSI_IN_SLAVE_MODE | SH_FSI_OFMT(PCM) | SH_FSI_IFMT(PCM), + + .portb_flags = SH_FSI_BRS_INV | + SH_FSI_BRM_INV | + SH_FSI_LRS_INV | + SH_FSI_OFMT(SPDIF), + .set_rate = fsi_set_rate, }; static struct resource fsi_resources[] = { @@ -634,6 +672,7 @@ static struct platform_device lcdc1_device = { static struct sh_mobile_hdmi_info hdmi_info = { .lcd_chan = &sh_mobile_lcdc1_info.ch[0], .lcd_dev = &lcdc1_device.dev, + .flags = HDMI_SND_SRC_SPDIF, }; static struct resource hdmi_resources[] = { @@ -992,6 +1031,7 @@ static void __init ap4evb_map_io(void) #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A +#define USCCR1 0xE6058144 static void __init ap4evb_init(void) { u32 srcr4; @@ -1062,7 +1102,7 @@ static void __init ap4evb_init(void) /* setup USB phy */ __raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */ - /* enable FSI2 */ + /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); gpio_request(GPIO_FN_FSIAISLD, NULL); @@ -1079,6 +1119,10 @@ static void __init ap4evb_init(void) gpio_request(GPIO_PORT41, NULL); gpio_direction_input(GPIO_PORT41); + /* setup FSI2 port B (HDMI) */ + gpio_request(GPIO_FN_FSIBCK, NULL); + __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ + /* set SPU2 clock to 119.6 MHz */ clk = clk_get(NULL, "spu_clk"); if (!IS_ERR(clk)) { -- cgit v1.2.3 From be8cb585d22013d87b1a123cf3bc93b474050c35 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 1 Nov 2010 11:38:06 -0400 Subject: ARM: mach-shmobile: include drivers/sh/Kconfig Many of the config bit are presently duplicated between the platforms, which will gradually cleaned up through centralization. For the moment we expose some new INTC features through drivers/sh/Kconfig that the ARM platforms presently don't enable, so make it generally available. Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 54b479c35ee0..51dcd59eda6a 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -116,4 +116,6 @@ endmenu config SH_CLK_CPG bool +source "drivers/sh/Kconfig" + endif -- cgit v1.2.3 From 5c4e0f198d670338daf296e95b7536fdb3489590 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 2 Nov 2010 11:28:33 +0000 Subject: ARM: mach-shmobile: fix sh7372 after a recent clock framework rework The updated sh clock framework has introduced a .nr_freqs element of struct clk, which has to be initialised with the number of possible frequencies. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh7372.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index fe7fa1550d36..7db31e6c6bf2 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -291,6 +291,7 @@ struct clk sh7372_pllc2_clk = { .ops = &pllc2_clk_ops, .parent = &extal1_div2_clk, .freq_table = pllc2_freq_table, + .nr_freqs = ARRAY_SIZE(pllc2_freq_table) - 1, .parent_table = pllc2_parent, .parent_num = ARRAY_SIZE(pllc2_parent), }; -- cgit v1.2.3 From cad3cde3f6f2a7854489f957dc22aa9a23afb06c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 4 Nov 2010 12:19:11 +0900 Subject: ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings. As non-PFC chips are added that may support IRQs, pass through to the generic helper. This follows the the SH change. Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/include/mach/gpio.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h index 5bc6bd444d72..2b1bb9e43dda 100644 --- a/arch/arm/mach-shmobile/include/mach/gpio.h +++ b/arch/arm/mach-shmobile/include/mach/gpio.h @@ -35,12 +35,12 @@ static inline int gpio_cansleep(unsigned gpio) static inline int gpio_to_irq(unsigned gpio) { - return -ENOSYS; + return __gpio_to_irq(gpio); } static inline int irq_to_gpio(unsigned int irq) { - return -EINVAL; + return -ENOSYS; } #endif /* CONFIG_GPIOLIB */ -- cgit v1.2.3 From 2f6ba5792ce9e4a731baeb976ccc72e0cf43d20b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 4 Nov 2010 12:21:25 +0900 Subject: mmc: sh_mmcif: Convert extern inline to static inline. Presently the extern inline case results in a compiler warning on ARM due to the memory barrier definition used in the I/O routines. These ultimately all want to be static inline anyways, so just convert them all in place. Signed-off-by: Paul Mundt --- include/linux/mmc/sh_mmcif.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index d19e2114fd86..5c99da1078aa 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -59,19 +59,19 @@ struct sh_mmcif_plat_data { #define MMCIF_CE_HOST_STS2 0x0000004C #define MMCIF_CE_VERSION 0x0000007C -extern inline u32 sh_mmcif_readl(void __iomem *addr, int reg) +static inline u32 sh_mmcif_readl(void __iomem *addr, int reg) { return readl(addr + reg); } -extern inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val) +static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val) { writel(val, addr + reg); } #define SH_MMCIF_BBS 512 /* boot block size */ -extern inline void sh_mmcif_boot_cmd_send(void __iomem *base, +static inline void sh_mmcif_boot_cmd_send(void __iomem *base, unsigned long cmd, unsigned long arg) { sh_mmcif_writel(base, MMCIF_CE_INT, 0); @@ -79,7 +79,7 @@ extern inline void sh_mmcif_boot_cmd_send(void __iomem *base, sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd); } -extern inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask) +static inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask) { unsigned long tmp; int cnt; @@ -95,14 +95,14 @@ extern inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask) return -1; } -extern inline int sh_mmcif_boot_cmd(void __iomem *base, +static inline int sh_mmcif_boot_cmd(void __iomem *base, unsigned long cmd, unsigned long arg) { sh_mmcif_boot_cmd_send(base, cmd, arg); return sh_mmcif_boot_cmd_poll(base, 0x00010000); } -extern inline int sh_mmcif_boot_do_read_single(void __iomem *base, +static inline int sh_mmcif_boot_do_read_single(void __iomem *base, unsigned int block_nr, unsigned long *buf) { @@ -125,7 +125,7 @@ extern inline int sh_mmcif_boot_do_read_single(void __iomem *base, return 0; } -extern inline int sh_mmcif_boot_do_read(void __iomem *base, +static inline int sh_mmcif_boot_do_read(void __iomem *base, unsigned long first_block, unsigned long nr_blocks, void *buf) @@ -143,7 +143,7 @@ extern inline int sh_mmcif_boot_do_read(void __iomem *base, return ret; } -extern inline void sh_mmcif_boot_init(void __iomem *base) +static inline void sh_mmcif_boot_init(void __iomem *base) { unsigned long tmp; @@ -177,7 +177,7 @@ extern inline void sh_mmcif_boot_init(void __iomem *base) sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000); } -extern inline void sh_mmcif_boot_slurp(void __iomem *base, +static inline void sh_mmcif_boot_slurp(void __iomem *base, unsigned char *buf, unsigned long no_bytes) { -- cgit v1.2.3