From a62e8f1978f49e52f87a711ff6711b323d4b12ff Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Thu, 24 Dec 2009 11:34:16 +0300 Subject: ACPI: EC: Accelerate query execution Split EC query handling into acknowledge and execution phase. This allows much smaller pending query lattency and lowers chances of EC going "wild" and losing events. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14858 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 122 ++++++++++++++++++++++++++++++++++-------------------- 1 file changed, 77 insertions(+), 45 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index fd1801bdee66..9cc38857c33b 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -201,14 +201,13 @@ unlock: spin_unlock_irqrestore(&ec->curr_lock, flags); } -static void acpi_ec_gpe_query(void *ec_cxt); +static int acpi_ec_sync_query(struct acpi_ec *ec); -static int ec_check_sci(struct acpi_ec *ec, u8 state) +static int ec_check_sci_sync(struct acpi_ec *ec, u8 state) { if (state & ACPI_EC_FLAG_SCI) { if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) - return acpi_os_execute(OSL_EC_BURST_HANDLER, - acpi_ec_gpe_query, ec); + return acpi_ec_sync_query(ec); } return 0; } @@ -249,11 +248,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, { unsigned long tmp; int ret = 0; - pr_debug(PREFIX "transaction start\n"); - /* disable GPE during transaction if storm is detected */ - if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { - acpi_disable_gpe(NULL, ec->gpe); - } if (EC_FLAGS_MSI) udelay(ACPI_EC_MSI_UDELAY); /* start transaction */ @@ -269,16 +263,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, spin_lock_irqsave(&ec->curr_lock, tmp); ec->curr = NULL; spin_unlock_irqrestore(&ec->curr_lock, tmp); - if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { - /* check if we received SCI during transaction */ - ec_check_sci(ec, acpi_ec_read_status(ec)); - /* it is safe to enable GPE outside of transaction */ - acpi_enable_gpe(NULL, ec->gpe); - } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { - pr_info(PREFIX "GPE storm detected, " - "transactions will use polling mode\n"); - set_bit(EC_FLAGS_GPE_STORM, &ec->flags); - } return ret; } @@ -321,7 +305,24 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) status = -ETIME; goto end; } + pr_debug(PREFIX "transaction start\n"); + /* disable GPE during transaction if storm is detected */ + if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + acpi_disable_gpe(NULL, ec->gpe); + } + status = acpi_ec_transaction_unlocked(ec, t); + + /* check if we received SCI during transaction */ + ec_check_sci_sync(ec, acpi_ec_read_status(ec)); + if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + /* it is safe to enable GPE outside of transaction */ + acpi_enable_gpe(NULL, ec->gpe); + } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { + pr_info(PREFIX "GPE storm detected, " + "transactions will use polling mode\n"); + set_bit(EC_FLAGS_GPE_STORM, &ec->flags); + } end: if (ec->global_lock) acpi_release_global_lock(glk); @@ -443,7 +444,7 @@ int ec_transaction(u8 command, EXPORT_SYMBOL(ec_transaction); -static int acpi_ec_query(struct acpi_ec *ec, u8 * data) +static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data) { int result; u8 d; @@ -452,20 +453,16 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 * data) .wlen = 0, .rlen = 1}; if (!ec || !data) return -EINVAL; - /* * Query the EC to find out which _Qxx method we need to evaluate. * Note that successful completion of the query causes the ACPI_EC_SCI * bit to be cleared (and thus clearing the interrupt source). */ - - result = acpi_ec_transaction(ec, &t); + result = acpi_ec_transaction_unlocked(ec, &t); if (result) return result; - if (!d) return -ENODATA; - *data = d; return 0; } @@ -509,43 +506,78 @@ void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit) EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler); -static void acpi_ec_gpe_query(void *ec_cxt) +static void acpi_ec_run(void *cxt) { - struct acpi_ec *ec = ec_cxt; - u8 value = 0; - struct acpi_ec_query_handler *handler, copy; - - if (!ec || acpi_ec_query(ec, &value)) + struct acpi_ec_query_handler *handler = cxt; + if (!handler) return; - mutex_lock(&ec->lock); + pr_debug(PREFIX "start query execution\n"); + if (handler->func) + handler->func(handler->data); + else if (handler->handle) + acpi_evaluate_object(handler->handle, NULL, NULL, NULL); + pr_debug(PREFIX "stop query execution\n"); + kfree(handler); +} + +static int acpi_ec_sync_query(struct acpi_ec *ec) +{ + u8 value = 0; + int status; + struct acpi_ec_query_handler *handler, *copy; + if ((status = acpi_ec_query_unlocked(ec, &value))) + return status; list_for_each_entry(handler, &ec->list, node) { if (value == handler->query_bit) { /* have custom handler for this bit */ - memcpy(©, handler, sizeof(copy)); - mutex_unlock(&ec->lock); - if (copy.func) { - copy.func(copy.data); - } else if (copy.handle) { - acpi_evaluate_object(copy.handle, NULL, NULL, NULL); - } - return; + copy = kmalloc(sizeof(*handler), GFP_KERNEL); + if (!copy) + return -ENOMEM; + memcpy(copy, handler, sizeof(*copy)); + pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value); + return acpi_os_execute(OSL_GPE_HANDLER, + acpi_ec_run, copy); } } + return 0; +} + +static void acpi_ec_gpe_query(void *ec_cxt) +{ + struct acpi_ec *ec = ec_cxt; + if (!ec) + return; + mutex_lock(&ec->lock); + acpi_ec_sync_query(ec); mutex_unlock(&ec->lock); } +static void acpi_ec_gpe_query(void *ec_cxt); + +static int ec_check_sci(struct acpi_ec *ec, u8 state) +{ + if (state & ACPI_EC_FLAG_SCI) { + if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) { + pr_debug(PREFIX "push gpe query to the queue\n"); + return acpi_os_execute(OSL_NOTIFY_HANDLER, + acpi_ec_gpe_query, ec); + } + } + return 0; +} + static u32 acpi_ec_gpe_handler(void *data) { struct acpi_ec *ec = data; - u8 status; pr_debug(PREFIX "~~~> interrupt\n"); - status = acpi_ec_read_status(ec); - advance_transaction(ec, status); - if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0) + advance_transaction(ec, acpi_ec_read_status(ec)); + if (ec_transaction_done(ec) && + (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { wake_up(&ec->wait); - ec_check_sci(ec, status); + ec_check_sci(ec, acpi_ec_read_status(ec)); + } return ACPI_INTERRUPT_HANDLED; } -- cgit v1.2.3 From 0798219f6154baa6a8efe767bfffb4a724e4b1e1 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Mon, 28 Dec 2009 16:58:38 +0100 Subject: drbd: Use drbd_crypto_is_hash() instead of an open coded check Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_nl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index 4e0726aa53b0..3313901a4861 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -1271,7 +1271,7 @@ static int drbd_nl_net_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp, goto fail; } - if (crypto_tfm_alg_type(crypto_hash_tfm(tfm)) != CRYPTO_ALG_TYPE_SHASH) { + if (!drbd_crypto_is_hash(crypto_hash_tfm(tfm))) { retcode = ERR_AUTH_ALG_ND; goto fail; } -- cgit v1.2.3 From 0a6dbf2bc4ea3781c530f895e2d92fd3c4a735a2 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Mon, 28 Dec 2009 16:58:38 +0100 Subject: drbd: Fix for a race between IO and a detach operation [Bugz 262] In D_DISKLESS we do not hand out any new references to ldev (local_cnt) therefore waiting until all previously handed out refereces got returned is sufficient before actually freeing mdev->ldev. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 9348f33f6242..e898ad9eb1c3 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -1298,6 +1298,7 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, dev_err(DEV, "Sending state in drbd_io_error() failed\n"); } + wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt)); lc_destroy(mdev->resync); mdev->resync = NULL; lc_destroy(mdev->act_log); -- cgit v1.2.3 From 89f01d5cd3c7ef01239bf15283181a0091c78657 Mon Sep 17 00:00:00 2001 From: Johannes Thoma Date: Tue, 29 Dec 2009 16:38:04 +0100 Subject: drbd: Kconfig fix !CONFIG_OPT evalues to FALSE if CONFIG_OPT='m'. Do not display the "DRBD disabled..." message if the dependencies are compiled as module. Signed-off-by: Johannes Thoma Signed-off-by: Philipp Reisner --- drivers/block/drbd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/Kconfig b/drivers/block/drbd/Kconfig index f4acd04ebeef..df0983787390 100644 --- a/drivers/block/drbd/Kconfig +++ b/drivers/block/drbd/Kconfig @@ -3,7 +3,7 @@ # comment "DRBD disabled because PROC_FS, INET or CONNECTOR not selected" - depends on !PROC_FS || !INET || !CONNECTOR + depends on PROC_FS='n' || INET='n' || CONNECTOR='n' config BLK_DEV_DRBD tristate "DRBD Distributed Replicated Block Device support" -- cgit v1.2.3 From 3b8cb427e9281790f36e847e46cb1d005a50cec0 Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Mon, 14 Dec 2009 09:42:28 +0800 Subject: acpi_pad: fix error checks There are some fixes listed below: 1. When met a bogus BIOS, the return value of cpu number maybe is a negative value so that acpi_pad_pur get an unexpected result. 2. the return value of function acpi_pad_idle_cpus is useless. 3. enhance the process of create_power_saving_task/destroy_power_saving_task 4. Add more error checks when evaluating _PUR object. 5. one typo fix Signed-off-by: Chen Gong Acked-by: Shaohua Li Signed-off-by: Len Brown --- drivers/acpi/acpi_pad.c | 37 ++++++++++++++++++++----------------- 1 file changed, 20 insertions(+), 17 deletions(-) diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index 0d2cdb86158b..a7bd49f0f01f 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -207,7 +207,7 @@ static int power_saving_thread(void *data) * the mechanism only works when all CPUs have RT task running, * as if one CPU hasn't RT task, RT task from other CPUs will * borrow CPU time from this CPU and cause RT task use > 95% - * CPU time. To make 'avoid staration' work, takes a nap here. + * CPU time. To make 'avoid starvation' work, takes a nap here. */ if (do_sleep) schedule_timeout_killable(HZ * idle_pct / 100); @@ -221,14 +221,18 @@ static struct task_struct *ps_tsks[NR_CPUS]; static unsigned int ps_tsk_num; static int create_power_saving_task(void) { + int rc = -ENOMEM; + ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread, (void *)(unsigned long)ps_tsk_num, "power_saving/%d", ps_tsk_num); - if (ps_tsks[ps_tsk_num]) { + rc = IS_ERR(ps_tsks[ps_tsk_num]) ? PTR_ERR(ps_tsks[ps_tsk_num]) : 0; + if (!rc) ps_tsk_num++; - return 0; - } - return -EINVAL; + else + ps_tsks[ps_tsk_num] = NULL; + + return rc; } static void destroy_power_saving_task(void) @@ -236,6 +240,7 @@ static void destroy_power_saving_task(void) if (ps_tsk_num > 0) { ps_tsk_num--; kthread_stop(ps_tsks[ps_tsk_num]); + ps_tsks[ps_tsk_num] = NULL; } } @@ -252,7 +257,7 @@ static void set_power_saving_task_num(unsigned int num) } } -static int acpi_pad_idle_cpus(unsigned int num_cpus) +static void acpi_pad_idle_cpus(unsigned int num_cpus) { get_online_cpus(); @@ -260,7 +265,6 @@ static int acpi_pad_idle_cpus(unsigned int num_cpus) set_power_saving_task_num(num_cpus); put_online_cpus(); - return 0; } static uint32_t acpi_pad_idle_cpus_num(void) @@ -368,19 +372,21 @@ static void acpi_pad_remove_sysfs(struct acpi_device *device) static int acpi_pad_pur(acpi_handle handle, int *num_cpus) { struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; - acpi_status status; union acpi_object *package; int rev, num, ret = -EINVAL; - status = acpi_evaluate_object(handle, "_PUR", NULL, &buffer); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PUR", NULL, &buffer))) + return -EINVAL; + + if (!buffer.length || !buffer.pointer) return -EINVAL; + package = buffer.pointer; if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2) goto out; rev = package->package.elements[0].integer.value; num = package->package.elements[1].integer.value; - if (rev != 1) + if (rev != 1 || num < 0) goto out; *num_cpus = num; ret = 0; @@ -409,7 +415,7 @@ static void acpi_pad_ost(acpi_handle handle, int stat, static void acpi_pad_handle_notify(acpi_handle handle) { - int num_cpus, ret; + int num_cpus; uint32_t idle_cpus; mutex_lock(&isolated_cpus_lock); @@ -417,12 +423,9 @@ static void acpi_pad_handle_notify(acpi_handle handle) mutex_unlock(&isolated_cpus_lock); return; } - ret = acpi_pad_idle_cpus(num_cpus); + acpi_pad_idle_cpus(num_cpus); idle_cpus = acpi_pad_idle_cpus_num(); - if (!ret) - acpi_pad_ost(handle, 0, idle_cpus); - else - acpi_pad_ost(handle, 1, 0); + acpi_pad_ost(handle, 0, idle_cpus); mutex_unlock(&isolated_cpus_lock); } -- cgit v1.2.3 From c504f8cb68eb0d6cde53ba043daff8cb34586493 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 30 Dec 2009 15:59:23 +0800 Subject: ACPI video: Prune dupe video devices, unless "video.allow_duplicates" Some buggy BIOS exports multiple ACPI video bus devices for the same VGA controller, and multiple backlight control methods as well. This messes up the ACPI video backlight control. http://bugzilla.kernel.org/show_bug.cgi?id=13577 With this patch applied, only the FIRST ACPI video bus device under a PCI device node is bind to ACPI video driver by default. If the first ACPI video bus device doesn't work well, we can use video.allow_duplicates=1 to go back to the old behavior. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 05dff631591c..45e6a29c8177 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -78,6 +78,13 @@ MODULE_LICENSE("GPL"); static int brightness_switch_enabled = 1; module_param(brightness_switch_enabled, bool, 0644); +/* + * By default, we don't allow duplicate ACPI video bus devices + * under the same VGA controller + */ +static int allow_duplicates; +module_param(allow_duplicates, bool, 0644); + static int register_count = 0; static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device, int type); @@ -2233,11 +2240,47 @@ static int acpi_video_resume(struct acpi_device *device) return AE_OK; } +static acpi_status +acpi_video_bus_match(acpi_handle handle, u32 level, void *context, + void **return_value) +{ + struct acpi_device *device = context; + struct acpi_device *sibling; + int result; + + if (handle == device->handle) + return AE_CTRL_TERMINATE; + + result = acpi_bus_get_device(handle, &sibling); + if (result) + return AE_OK; + + if (!strcmp(acpi_device_name(sibling), ACPI_VIDEO_BUS_NAME)) + return AE_ALREADY_EXISTS; + + return AE_OK; +} + static int acpi_video_bus_add(struct acpi_device *device) { struct acpi_video_bus *video; struct input_dev *input; int error; + acpi_status status; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, + device->parent->handle, 1, + acpi_video_bus_match, NULL, + device, NULL); + if (status == AE_ALREADY_EXISTS) { + printk(KERN_WARNING FW_BUG + "Duplicate ACPI video bus devices for the" + " same VGA controller, please try module " + "parameter \"video.allow_duplicates=1\"" + "if the current driver doesn't work.\n"); + if (!allow_duplicates) + return -ENODEV; + } video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL); if (!video) -- cgit v1.2.3 From 367a8d738542b091228613751af0958ce25bbeb3 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Tue, 29 Dec 2009 15:56:01 +0100 Subject: drbd: Silenced an assert that could triggered after changing write ordering method Immediately after changing the write ordering method, the epoch can already be finished at this point. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_receiver.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 259c1351b152..a6d266ee7e2a 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -1201,10 +1201,11 @@ static int receive_Barrier(struct drbd_conf *mdev, struct p_header *h) case WO_bdev_flush: case WO_drain_io: - D_ASSERT(rv == FE_STILL_LIVE); - set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags); - drbd_wait_ee_list_empty(mdev, &mdev->active_ee); - rv = drbd_flush_after_epoch(mdev, mdev->current_epoch); + if (rv == FE_STILL_LIVE) { + set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags); + drbd_wait_ee_list_empty(mdev, &mdev->active_ee); + rv = drbd_flush_after_epoch(mdev, mdev->current_epoch); + } if (rv == FE_RECYCLED) return TRUE; -- cgit v1.2.3 From 2d1ee87d8763b38668f6f11bb53abb689a49a43e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 27 Dec 2009 22:27:11 +0100 Subject: drivers/block/drbd: Correct NULL test Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // Signed-off-by: Julia Lawall Signed-off-by: Philipp Reisner --- drivers/block/drbd/drbd_receiver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index a6d266ee7e2a..dbd451984e0d 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -3945,7 +3945,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) } right_response = kmalloc(resp_size, GFP_NOIO); - if (response == NULL) { + if (right_response == NULL) { dev_err(DEV, "kmalloc of right_response failed\n"); rv = 0; goto fail; -- cgit v1.2.3 From 8558e3943df1c51c3377cb4e8a52ea484d6f357d Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 6 Jan 2010 16:11:06 -0500 Subject: x86, ACPI: delete acpi_boot_table_init() return value cleanup only. setup_arch(), doesn't care care if ACPI initialization succeeded or failed, so delete acpi_boot_table_init()'s return value. Signed-off-by: Len Brown --- arch/x86/kernel/acpi/boot.c | 22 ++++++---------------- include/linux/acpi.h | 6 +++--- 2 files changed, 9 insertions(+), 19 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index fb1035cd9a6a..036d28adf59d 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1529,16 +1529,10 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { * if acpi_blacklisted() acpi_disabled = 1; * acpi_irq_model=... * ... - * - * return value: (currently ignored) - * 0: success - * !0: failure */ -int __init acpi_boot_table_init(void) +void __init acpi_boot_table_init(void) { - int error; - dmi_check_system(acpi_dmi_table); /* @@ -1546,15 +1540,14 @@ int __init acpi_boot_table_init(void) * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) - return 1; + return; /* * Initialize the ACPI boot-time table parser. */ - error = acpi_table_init(); - if (error) { + if (acpi_table_init()) { disable_acpi(); - return error; + return; } acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf); @@ -1562,18 +1555,15 @@ int __init acpi_boot_table_init(void) /* * blacklist may disable ACPI entirely */ - error = acpi_blacklisted(); - if (error) { + if (acpi_blacklisted()) { if (acpi_force) { printk(KERN_WARNING PREFIX "acpi=force override\n"); } else { printk(KERN_WARNING PREFIX "Disabling ACPI support\n"); disable_acpi(); - return error; + return; } } - - return 0; } int __init early_acpi_boot_init(void) diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 36924255c0d5..b926afe8c03e 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -80,7 +80,7 @@ char * __acpi_map_table (unsigned long phys_addr, unsigned long size); void __acpi_unmap_table(char *map, unsigned long size); int early_acpi_boot_init(void); int acpi_boot_init (void); -int acpi_boot_table_init (void); +void acpi_boot_table_init (void); int acpi_mps_check (void); int acpi_numa_init (void); @@ -321,9 +321,9 @@ static inline int acpi_boot_init(void) return 0; } -static inline int acpi_boot_table_init(void) +static inline void acpi_boot_table_init(void) { - return 0; + return; } static inline int acpi_mps_check(void) -- cgit v1.2.3 From 36bfc7e2100ab3f9891bb779c36d5e685f253509 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Tue, 5 Jan 2010 19:33:54 +0100 Subject: drbd: check on CONFIG_LBDAF, not LBD It is called LBDAF since 2.6.31. impact: without this change, on 32bit, DRBD would wrongly claim to only support 2TiB devices. Signed-off-by: Lars Ellenberg Signed-off-by: Philipp Reisner --- drivers/block/drbd/drbd_int.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index c97558763430..79d8e22c4d0d 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -1275,7 +1275,7 @@ struct bm_extent { #if DRBD_MAX_SECTORS_BM < DRBD_MAX_SECTORS_32 #define DRBD_MAX_SECTORS DRBD_MAX_SECTORS_BM #define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_BM -#elif !defined(CONFIG_LBD) && BITS_PER_LONG == 32 +#elif !defined(CONFIG_LBDAF) && BITS_PER_LONG == 32 #define DRBD_MAX_SECTORS DRBD_MAX_SECTORS_32 #define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_32 #else -- cgit v1.2.3 From fe0b393f2c0a0d23a9bc9ed7dc51a1ee511098bd Mon Sep 17 00:00:00 2001 From: Martin K. Petersen Date: Mon, 11 Jan 2010 03:21:47 -0500 Subject: block: Correct handling of bottom device misaligment The top device misalignment flag would not be set if the added bottom device was already misaligned as opposed to causing a stacking failure. Also massage the reporting so that an error is only returned if adding the bottom device caused the misalignment. I.e. don't return an error if the top is already flagged as misaligned. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/blk-settings.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/block/blk-settings.c b/block/blk-settings.c index d52d4adc440b..127f82551855 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -528,7 +528,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset) { sector_t alignment; - unsigned int top, bottom; + unsigned int top, bottom, ret = 0; t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors); t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors); @@ -546,6 +546,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->max_segment_size = min_not_zero(t->max_segment_size, b->max_segment_size); + t->misaligned |= b->misaligned; + alignment = queue_limit_alignment_offset(b, offset); /* Bottom device has different alignment. Check that it is @@ -558,8 +560,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, bottom = max(b->physical_block_size, b->io_min) + alignment; /* Verify that top and bottom intervals line up */ - if (max(top, bottom) & (min(top, bottom) - 1)) + if (max(top, bottom) & (min(top, bottom) - 1)) { t->misaligned = 1; + ret = -1; + } } t->logical_block_size = max(t->logical_block_size, @@ -578,18 +582,21 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, if (t->physical_block_size & (t->logical_block_size - 1)) { t->physical_block_size = t->logical_block_size; t->misaligned = 1; + ret = -1; } /* Minimum I/O a multiple of the physical block size? */ if (t->io_min & (t->physical_block_size - 1)) { t->io_min = t->physical_block_size; t->misaligned = 1; + ret = -1; } /* Optimal I/O a multiple of the physical block size? */ if (t->io_opt & (t->physical_block_size - 1)) { t->io_opt = 0; t->misaligned = 1; + ret = -1; } /* Find lowest common alignment_offset */ @@ -597,8 +604,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, & (max(t->physical_block_size, t->io_min) - 1); /* Verify that new alignment_offset is on a logical block boundary */ - if (t->alignment_offset & (t->logical_block_size - 1)) + if (t->alignment_offset & (t->logical_block_size - 1)) { t->misaligned = 1; + ret = -1; + } /* Discard alignment and granularity */ if (b->discard_granularity) { @@ -626,7 +635,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, (t->discard_granularity - 1); } - return t->misaligned ? -1 : 0; + return ret; } EXPORT_SYMBOL(blk_stack_limits); -- cgit v1.2.3 From dd3d145d49c5816b79acc6761ebbd842bc50b0ee Mon Sep 17 00:00:00 2001 From: Martin K. Petersen Date: Mon, 11 Jan 2010 03:21:48 -0500 Subject: block: Fix discard alignment calculation and printing Discard alignment reporting for partitions was incorrect. Update to match the algorithm used elsewhere. The alignment can be negative (misaligned). Fix format string accordingly. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/genhd.c | 2 +- include/linux/blkdev.h | 7 +++++-- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/block/genhd.c b/block/genhd.c index b11a4ad7d571..d13ba76a169c 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -867,7 +867,7 @@ static ssize_t disk_discard_alignment_show(struct device *dev, { struct gendisk *disk = dev_to_disk(dev); - return sprintf(buf, "%u\n", queue_discard_alignment(disk->queue)); + return sprintf(buf, "%d\n", queue_discard_alignment(disk->queue)); } static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9b98173a8184..a41bcc8e140f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1148,8 +1148,11 @@ static inline int queue_discard_alignment(struct request_queue *q) static inline int queue_sector_discard_alignment(struct request_queue *q, sector_t sector) { - return ((sector << 9) - q->limits.discard_alignment) - & (q->limits.discard_granularity - 1); + struct queue_limits *lim = &q->limits; + unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1); + + return (lim->discard_granularity + lim->discard_alignment - alignment) + & (lim->discard_granularity - 1); } static inline unsigned int queue_discard_zeroes_data(struct request_queue *q) -- cgit v1.2.3 From 17be8c245054b9c7786545af3ba3ca4e54cd4ad9 Mon Sep 17 00:00:00 2001 From: Martin K. Petersen Date: Mon, 11 Jan 2010 03:21:49 -0500 Subject: block: bdev_stack_limits wrapper DM does not want to know about partition offsets. Add a partition-aware wrapper that DM can use when stacking block devices. Signed-off-by: Martin K. Petersen Acked-by: Mike Snitzer Reviewed-by: Alasdair G Kergon Signed-off-by: Jens Axboe --- block/blk-settings.c | 22 ++++++++++++++++++++++ include/linux/blkdev.h | 2 ++ 2 files changed, 24 insertions(+) diff --git a/block/blk-settings.c b/block/blk-settings.c index 127f82551855..5eeb9e0d256e 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -639,6 +639,28 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, } EXPORT_SYMBOL(blk_stack_limits); +/** + * bdev_stack_limits - adjust queue limits for stacked drivers + * @t: the stacking driver limits (top device) + * @bdev: the component block_device (bottom) + * @start: first data sector within component device + * + * Description: + * Merges queue limits for a top device and a block_device. Returns + * 0 if alignment didn't change. Returns -1 if adding the bottom + * device caused misalignment. + */ +int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev, + sector_t start) +{ + struct request_queue *bq = bdev_get_queue(bdev); + + start += get_start_sect(bdev); + + return blk_stack_limits(t, &bq->limits, start << 9); +} +EXPORT_SYMBOL(bdev_stack_limits); + /** * disk_stack_limits - adjust queue limits for stacked drivers * @disk: MD/DM gendisk (top) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index a41bcc8e140f..5c8018977efa 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -938,6 +938,8 @@ extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt); extern void blk_set_default_limits(struct queue_limits *lim); extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset); +extern int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev, + sector_t offset); extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev, sector_t offset); extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b); -- cgit v1.2.3 From b27d7f16d3c6c27345d4280a739809c1c2c4c0b5 Mon Sep 17 00:00:00 2001 From: Martin K. Petersen Date: Mon, 11 Jan 2010 03:21:50 -0500 Subject: DM: Fix device mapper topology stacking Make DM use bdev_stack_limits() function so that partition offsets get taken into account when calculating alignment. Clarify stacking warnings. Also remove obsolete clearing of final alignment_offset and misalignment flag. Signed-off-by: Martin K. Petersen Signed-off-by: Mike Snitzer Cc: Alasdair G. Kergon Signed-off-by: Jens Axboe --- drivers/md/dm-table.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index be625475cf6d..4b22feb01a0c 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -503,16 +503,15 @@ int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev, return 0; } - if (blk_stack_limits(limits, &q->limits, start << 9) < 0) - DMWARN("%s: target device %s is misaligned: " + if (bdev_stack_limits(limits, bdev, start) < 0) + DMWARN("%s: adding target device %s caused an alignment inconsistency: " "physical_block_size=%u, logical_block_size=%u, " "alignment_offset=%u, start=%llu", dm_device_name(ti->table->md), bdevname(bdev, b), q->limits.physical_block_size, q->limits.logical_block_size, q->limits.alignment_offset, - (unsigned long long) start << 9); - + (unsigned long long) start << SECTOR_SHIFT); /* * Check if merge fn is supported. @@ -1026,9 +1025,9 @@ combine_limits: * for the table. */ if (blk_stack_limits(limits, &ti_limits, 0) < 0) - DMWARN("%s: target device " + DMWARN("%s: adding target device " "(start sect %llu len %llu) " - "is misaligned", + "caused an alignment inconsistency", dm_device_name(table->md), (unsigned long long) ti->begin, (unsigned long long) ti->len); @@ -1079,15 +1078,6 @@ no_integrity: void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, struct queue_limits *limits) { - /* - * Each target device in the table has a data area that should normally - * be aligned such that the DM device's alignment_offset is 0. - * FIXME: Propagate alignment_offsets up the stack and warn of - * sub-optimal or inconsistent settings. - */ - limits->alignment_offset = 0; - limits->misaligned = 0; - /* * Copy table's limits to the DM device's request_queue */ -- cgit v1.2.3 From ce289321b7dc1eb108e3df0dec872b7429ef49f7 Mon Sep 17 00:00:00 2001 From: Kirill Afonshin Date: Fri, 8 Jan 2010 22:09:59 +0300 Subject: block: removed unused as_io_context It isn't used anymore, since AS was deleted. Signed-off-by: Jens Axboe --- block/blk-ioc.c | 5 ----- include/linux/iocontext.h | 27 --------------------------- 2 files changed, 32 deletions(-) diff --git a/block/blk-ioc.c b/block/blk-ioc.c index cbdabb0dd6d7..98e6bf61b0ac 100644 --- a/block/blk-ioc.c +++ b/block/blk-ioc.c @@ -39,8 +39,6 @@ int put_io_context(struct io_context *ioc) if (atomic_long_dec_and_test(&ioc->refcount)) { rcu_read_lock(); - if (ioc->aic && ioc->aic->dtor) - ioc->aic->dtor(ioc->aic); cfq_dtor(ioc); rcu_read_unlock(); @@ -76,8 +74,6 @@ void exit_io_context(struct task_struct *task) task_unlock(task); if (atomic_dec_and_test(&ioc->nr_tasks)) { - if (ioc->aic && ioc->aic->exit) - ioc->aic->exit(ioc->aic); cfq_exit(ioc); } @@ -97,7 +93,6 @@ struct io_context *alloc_io_context(gfp_t gfp_flags, int node) ret->ioprio = 0; ret->last_waited = jiffies; /* doesn't matter... */ ret->nr_batch_requests = 0; /* because this is 0 */ - ret->aic = NULL; INIT_RADIX_TREE(&ret->radix_root, GFP_ATOMIC | __GFP_HIGH); INIT_HLIST_HEAD(&ret->cic_list); ret->ioc_data = NULL; diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index a63235996309..78ef023227d4 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -4,32 +4,6 @@ #include #include -/* - * This is the per-process anticipatory I/O scheduler state. - */ -struct as_io_context { - spinlock_t lock; - - void (*dtor)(struct as_io_context *aic); /* destructor */ - void (*exit)(struct as_io_context *aic); /* called on task exit */ - - unsigned long state; - atomic_t nr_queued; /* queued reads & sync writes */ - atomic_t nr_dispatched; /* number of requests gone to the drivers */ - - /* IO History tracking */ - /* Thinktime */ - unsigned long last_end_request; - unsigned long ttime_total; - unsigned long ttime_samples; - unsigned long ttime_mean; - /* Layout pattern */ - unsigned int seek_samples; - sector_t last_request_pos; - u64 seek_total; - sector_t seek_mean; -}; - struct cfq_queue; struct cfq_io_context { void *key; @@ -78,7 +52,6 @@ struct io_context { unsigned long last_waited; /* Time last woken after wait for request */ int nr_batch_requests; /* Number of requests left in the batch */ - struct as_io_context *aic; struct radix_tree_root radix_root; struct hlist_head cic_list; void *ioc_data; -- cgit v1.2.3 From 7af92f8754b87bc78cbfd447d5f4096b25c46682 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 6 Jan 2010 15:45:55 -0800 Subject: genhd: overlapping variable definition This fixes the sparse warning: fs/ext4/super.c:2390:40: warning: symbol 'i' shadows an earlier one fs/ext4/super.c:2368:22: originally declared here Using 'i' in a macro is dubious practice. Signed-off-by: Stephen Hemminger Signed-off-by: Jens Axboe --- include/linux/genhd.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/genhd.h b/include/linux/genhd.h index c6c0c41af35f..9717081c75ad 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -256,9 +256,9 @@ extern struct hd_struct *disk_map_sector_rcu(struct gendisk *disk, #define part_stat_read(part, field) \ ({ \ typeof((part)->dkstats->field) res = 0; \ - int i; \ - for_each_possible_cpu(i) \ - res += per_cpu_ptr((part)->dkstats, i)->field; \ + unsigned int _cpu; \ + for_each_possible_cpu(_cpu) \ + res += per_cpu_ptr((part)->dkstats, _cpu)->field; \ res; \ }) -- cgit v1.2.3 From 875feb63b9567442be73efbcc9a8470e376d6423 Mon Sep 17 00:00:00 2001 From: Divyesh Shah Date: Wed, 6 Jan 2010 18:58:20 -0800 Subject: cfq-iosched: Respect ioprio_class when preempting In cfq_should_preempt(), we currently allow some cases where a non-RT request can preempt an ongoing RT cfqq timeslice. This should not happen. Examples include: o A sync_noidle wl type non-RT request pre-empting a sync_noidle wl type cfqq on which we are idling. o Once we have per-cgroup async queues, a non-RT sync request pre-empting a RT async cfqq. Signed-off-by: Divyesh Shah Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 918c7fd9aeb1..ee130f14d1fc 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -3076,6 +3076,12 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, if (cfq_class_idle(cfqq)) return true; + /* + * Don't allow a non-RT request to preempt an ongoing RT cfqq timeslice. + */ + if (cfq_class_rt(cfqq) && !cfq_class_rt(new_cfqq)) + return false; + /* * if the new request is sync, but the currently running queue is * not, let the sync request have priority. -- cgit v1.2.3 From 23978161f90e5a3200ad6ac9b0d534911e4cbb28 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 11 Jan 2010 16:17:12 +0100 Subject: drivers/block/drbd/drbd_receiver.c: correct NULL test Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // Signed-off-by: Julia Lawall Cc: Lars Ellenberg Cc: Philipp Reisner Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/drbd/drbd_receiver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index a6d266ee7e2a..dbd451984e0d 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -3945,7 +3945,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) } right_response = kmalloc(resp_size, GFP_NOIO); - if (response == NULL) { + if (right_response == NULL) { dev_err(DEV, "kmalloc of right_response failed\n"); rv = 0; goto fail; -- cgit v1.2.3 From b10d96cb9c9a2a0029d28910ca517f4003051b04 Mon Sep 17 00:00:00 2001 From: Johannes Thoma Date: Thu, 7 Jan 2010 16:02:50 +0100 Subject: drbd: Don't go into StandAlone mode when authentification failes because of network error Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_receiver.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index dbd451984e0d..e3716fadc6a5 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -878,9 +878,13 @@ retry: if (mdev->cram_hmac_tfm) { /* drbd_request_state(mdev, NS(conn, WFAuth)); */ - if (!drbd_do_auth(mdev)) { + switch (drbd_do_auth(mdev)) { + case -1: dev_err(DEV, "Authentication of peer failed\n"); return -1; + case 0: + dev_err(DEV, "Authentication of peer failed, trying again.\n"); + return 0; } } @@ -3831,10 +3835,17 @@ static int drbd_do_auth(struct drbd_conf *mdev) { dev_err(DEV, "This kernel was build without CONFIG_CRYPTO_HMAC.\n"); dev_err(DEV, "You need to disable 'cram-hmac-alg' in drbd.conf.\n"); - return 0; + return -1; } #else #define CHALLENGE_LEN 64 + +/* Return value: + 1 - auth succeeded, + 0 - failed, try again (network error), + -1 - auth failed, don't try again. +*/ + static int drbd_do_auth(struct drbd_conf *mdev) { char my_challenge[CHALLENGE_LEN]; /* 64 Bytes... */ @@ -3855,7 +3866,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) (u8 *)mdev->net_conf->shared_secret, key_len); if (rv) { dev_err(DEV, "crypto_hash_setkey() failed with %d\n", rv); - rv = 0; + rv = -1; goto fail; } @@ -3878,14 +3889,14 @@ static int drbd_do_auth(struct drbd_conf *mdev) if (p.length > CHALLENGE_LEN*2) { dev_err(DEV, "expected AuthChallenge payload too big.\n"); - rv = 0; + rv = -1; goto fail; } peers_ch = kmalloc(p.length, GFP_NOIO); if (peers_ch == NULL) { dev_err(DEV, "kmalloc of peers_ch failed\n"); - rv = 0; + rv = -1; goto fail; } @@ -3901,7 +3912,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) response = kmalloc(resp_size, GFP_NOIO); if (response == NULL) { dev_err(DEV, "kmalloc of response failed\n"); - rv = 0; + rv = -1; goto fail; } @@ -3911,7 +3922,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) rv = crypto_hash_digest(&desc, &sg, sg.length, response); if (rv) { dev_err(DEV, "crypto_hash_digest() failed with %d\n", rv); - rv = 0; + rv = -1; goto fail; } @@ -3947,7 +3958,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) right_response = kmalloc(resp_size, GFP_NOIO); if (right_response == NULL) { dev_err(DEV, "kmalloc of right_response failed\n"); - rv = 0; + rv = -1; goto fail; } @@ -3956,7 +3967,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) rv = crypto_hash_digest(&desc, &sg, sg.length, right_response); if (rv) { dev_err(DEV, "crypto_hash_digest() failed with %d\n", rv); - rv = 0; + rv = -1; goto fail; } @@ -3965,6 +3976,8 @@ static int drbd_do_auth(struct drbd_conf *mdev) if (rv) dev_info(DEV, "Peer authenticated using %d bytes of '%s' HMAC\n", resp_size, mdev->net_conf->cram_hmac_alg); + else + rv = -1; fail: kfree(peers_ch); -- cgit v1.2.3 From a393db6f10ef2d4f28257234cfc730e744dfb6a4 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Tue, 22 Dec 2009 13:35:52 +0100 Subject: drbd: Allow online resizing of DRBD devices while peer not reachable (needs to be explicitly forced) Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_int.h | 5 ++--- drivers/block/drbd/drbd_nl.c | 17 +++++++++++------ drivers/block/drbd/drbd_receiver.c | 4 ++-- include/linux/drbd_nl.h | 1 + 4 files changed, 16 insertions(+), 11 deletions(-) diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 79d8e22c4d0d..2bf3a6ef3684 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -1371,10 +1371,9 @@ extern int is_valid_ar_handle(struct drbd_request *, sector_t); extern void drbd_suspend_io(struct drbd_conf *mdev); extern void drbd_resume_io(struct drbd_conf *mdev); extern char *ppsize(char *buf, unsigned long long size); -extern sector_t drbd_new_dev_size(struct drbd_conf *, - struct drbd_backing_dev *); +extern sector_t drbd_new_dev_size(struct drbd_conf *, struct drbd_backing_dev *, int); enum determine_dev_size { dev_size_error = -1, unchanged = 0, shrunk = 1, grew = 2 }; -extern enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *) __must_hold(local); +extern enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *, int force) __must_hold(local); extern void resync_after_online_grow(struct drbd_conf *); extern void drbd_setup_queue_param(struct drbd_conf *mdev, unsigned int) __must_hold(local); extern int drbd_set_role(struct drbd_conf *mdev, enum drbd_role new_role, diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index 3313901a4861..1292e0620663 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -510,7 +510,7 @@ void drbd_resume_io(struct drbd_conf *mdev) * Returns 0 on success, negative return values indicate errors. * You should call drbd_md_sync() after calling this function. */ -enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev) __must_hold(local) +enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev, int force) __must_hold(local) { sector_t prev_first_sect, prev_size; /* previous meta location */ sector_t la_size; @@ -541,7 +541,7 @@ enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev) __must_ho /* TODO: should only be some assert here, not (re)init... */ drbd_md_set_sector_offsets(mdev, mdev->ldev); - size = drbd_new_dev_size(mdev, mdev->ldev); + size = drbd_new_dev_size(mdev, mdev->ldev, force); if (drbd_get_capacity(mdev->this_bdev) != size || drbd_bm_capacity(mdev) != size) { @@ -596,7 +596,7 @@ out: } sector_t -drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev) +drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev, int assume_peer_has_space) { sector_t p_size = mdev->p_size; /* partner's disk size. */ sector_t la_size = bdev->md.la_size_sect; /* last agreed size. */ @@ -606,6 +606,11 @@ drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev) m_size = drbd_get_max_capacity(bdev); + if (mdev->state.conn < C_CONNECTED && assume_peer_has_space) { + dev_warn(DEV, "Resize while not connected was forced by the user!\n"); + p_size = m_size; + } + if (p_size && m_size) { size = min_t(sector_t, p_size, m_size); } else { @@ -965,7 +970,7 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp /* Prevent shrinking of consistent devices ! */ if (drbd_md_test_flag(nbc, MDF_CONSISTENT) && - drbd_new_dev_size(mdev, nbc) < nbc->md.la_size_sect) { + drbd_new_dev_size(mdev, nbc, 0) < nbc->md.la_size_sect) { dev_warn(DEV, "refusing to truncate a consistent device\n"); retcode = ERR_DISK_TO_SMALL; goto force_diskless_dec; @@ -1052,7 +1057,7 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp !drbd_md_test_flag(mdev->ldev, MDF_CONNECTED_IND)) set_bit(USE_DEGR_WFC_T, &mdev->flags); - dd = drbd_determin_dev_size(mdev); + dd = drbd_determin_dev_size(mdev, 0); if (dd == dev_size_error) { retcode = ERR_NOMEM_BITMAP; goto force_diskless_dec; @@ -1504,7 +1509,7 @@ static int drbd_nl_resize(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp, } mdev->ldev->dc.disk_size = (sector_t)rs.resize_size; - dd = drbd_determin_dev_size(mdev); + dd = drbd_determin_dev_size(mdev, rs.resize_force); drbd_md_sync(mdev); put_ldev(mdev); if (dd == dev_size_error) { diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index e3716fadc6a5..f22a5283128a 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -2870,7 +2870,7 @@ static int receive_sizes(struct drbd_conf *mdev, struct p_header *h) /* Never shrink a device with usable data during connect. But allow online shrinking if we are connected. */ - if (drbd_new_dev_size(mdev, mdev->ldev) < + if (drbd_new_dev_size(mdev, mdev->ldev, 0) < drbd_get_capacity(mdev->this_bdev) && mdev->state.disk >= D_OUTDATED && mdev->state.conn < C_CONNECTED) { @@ -2885,7 +2885,7 @@ static int receive_sizes(struct drbd_conf *mdev, struct p_header *h) #undef min_not_zero if (get_ldev(mdev)) { - dd = drbd_determin_dev_size(mdev); + dd = drbd_determin_dev_size(mdev, 0); put_ldev(mdev); if (dd == dev_size_error) return FALSE; diff --git a/include/linux/drbd_nl.h b/include/linux/drbd_nl.h index db5721ad50d1..a4d82f895994 100644 --- a/include/linux/drbd_nl.h +++ b/include/linux/drbd_nl.h @@ -69,6 +69,7 @@ NL_PACKET(disconnect, 6, ) NL_PACKET(resize, 7, NL_INT64( 29, T_MAY_IGNORE, resize_size) + NL_BIT( 68, T_MAY_IGNORE, resize_force) ) NL_PACKET(syncer_conf, 8, -- cgit v1.2.3 From 2ebccd71a71e6078920bc65b40f120e72b71c2b6 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Tue, 12 Jan 2010 10:09:07 +0100 Subject: drbd: The kernel code is now equivalent to out of tree release 8.3.7 Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- include/linux/drbd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/drbd.h b/include/linux/drbd.h index e84f4733cb55..78962272338a 100644 --- a/include/linux/drbd.h +++ b/include/linux/drbd.h @@ -53,7 +53,7 @@ extern const char *drbd_buildtag(void); -#define REL_VERSION "8.3.6" +#define REL_VERSION "8.3.7" #define API_VERSION 88 #define PRO_VERSION_MIN 86 #define PRO_VERSION_MAX 91 -- cgit v1.2.3 From f5347867c5aea94c625246eaff8f7820b0a4cd8a Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 30 Dec 2009 15:53:03 +0300 Subject: ACPI: SBS: Move SBS HC callback to faster Notify queue SBS transactions should happen in Notify work queue, to not create a dead lock with GPE execution accessing SBS devices. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 3 ++- drivers/acpi/sbshc.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 9cc38857c33b..047330929821 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -535,7 +535,8 @@ static int acpi_ec_sync_query(struct acpi_ec *ec) return -ENOMEM; memcpy(copy, handler, sizeof(*copy)); pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value); - return acpi_os_execute(OSL_GPE_HANDLER, + return acpi_os_execute((copy->func) ? + OSL_NOTIFY_HANDLER : OSL_GPE_HANDLER, acpi_ec_run, copy); } } diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index d9339806df45..fd09229282ea 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -242,7 +242,7 @@ static int smbus_alarm(void *context) case ACPI_SBS_CHARGER: case ACPI_SBS_MANAGER: case ACPI_SBS_BATTERY: - acpi_os_execute(OSL_GPE_HANDLER, + acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_smbus_callback, hc); default:; } -- cgit v1.2.3 From 54070101f86ca9a6e9ba243c999d144721ec3db7 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 30 Dec 2009 15:53:10 +0300 Subject: ACPI: EC: Add wait for irq storm Merge of poll and irq modes accelerated EC transaction, so that keyboard starts to suffer again. Add msleep(1) into transaction path for the storm to allow keyboard controller to do its job. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14747 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 047330929821..d6471bb6852f 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -259,7 +259,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); spin_unlock_irqrestore(&ec->curr_lock, tmp); ret = ec_poll(ec); - pr_debug(PREFIX "transaction end\n"); spin_lock_irqsave(&ec->curr_lock, tmp); ec->curr = NULL; spin_unlock_irqrestore(&ec->curr_lock, tmp); @@ -316,6 +315,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) /* check if we received SCI during transaction */ ec_check_sci_sync(ec, acpi_ec_read_status(ec)); if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + msleep(1); /* it is safe to enable GPE outside of transaction */ acpi_enable_gpe(NULL, ec->gpe); } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { @@ -323,6 +323,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) "transactions will use polling mode\n"); set_bit(EC_FLAGS_GPE_STORM, &ec->flags); } + pr_debug(PREFIX "transaction end\n"); end: if (ec->global_lock) acpi_release_global_lock(glk); -- cgit v1.2.3 From 6a4e2b7503d1f630bface040cf0f5a7aac1fabdb Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Fri, 8 Jan 2010 21:29:58 +0800 Subject: ACPI: Advertise to BIOS in _OSC: _OST on _PPC changes If the BIOS pokes the system-wide OSC bits to see if Linux supports evaluating _OST after a _PPC change notification, answer yes. Also, fix an oversight where we neglected to set the OSC bit advertising processor aggregator device support when acpi-pad is compiled as a module. Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- drivers/acpi/bus.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index cf761b904e4a..a52126e46307 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -490,9 +490,14 @@ static void acpi_bus_osc_support(void) capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; capbuf[OSC_SUPPORT_TYPE] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */ -#ifdef CONFIG_ACPI_PROCESSOR_AGGREGATOR +#if defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) ||\ + defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE) capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PAD_SUPPORT; #endif + +#if defined(CONFIG_ACPI_PROCESSOR) || defined(CONFIG_ACPI_PROCESSOR_MODULE) + capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PPC_OST_SUPPORT; +#endif if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))) return; if (ACPI_SUCCESS(acpi_run_osc(handle, &context))) -- cgit v1.2.3 From 070a24f4d238612bede515023893b18f494774c4 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 8 Jan 2010 11:12:41 -0700 Subject: ACPI: Remove unnecessary cast. The struct seq_file 'private' member is a void *, the cast is not needed. Also, remove an extra whitespace line. Signed-off-by: H Hartley Sweeten Signed-off-by: Len Brown --- drivers/acpi/processor_thermal.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index 140c5c5b423c..6deafb4aa0da 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -443,8 +443,7 @@ struct thermal_cooling_device_ops processor_cooling_ops = { #ifdef CONFIG_ACPI_PROCFS static int acpi_processor_limit_seq_show(struct seq_file *seq, void *offset) { - struct acpi_processor *pr = (struct acpi_processor *)seq->private; - + struct acpi_processor *pr = seq->private; if (!pr) goto end; -- cgit v1.2.3 From c084ca704a3661bf77690a05bc6bd2c305d87c34 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Thu, 10 Dec 2009 19:56:45 +0800 Subject: ACPI: don't cond_resched if irq is disabled commit 8bd108d adds preemption point after each opcode parse, then a sleeping function called from invalid context bug was founded during suspend/resume stage. this was fixed in commit abe1dfa by don't cond_resched when irq_disabled. But recent commit 138d156 changes the behaviour to don't cond_resched when in_atomic. This makes the sleeping function called from invalid context bug happen again, which is reported in http://lkml.org/lkml/2009/12/1/371. This patch also fixes http://bugzilla.kernel.org/show_bug.cgi?id=14483 Reported-and-bisected-by: Larry Finger Reported-and-bisected-by: Justin P. Mattock Signed-off-by: Xiaotian Feng Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/platform/aclinux.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h index 9d7febde10a1..09469971472f 100644 --- a/include/acpi/platform/aclinux.h +++ b/include/acpi/platform/aclinux.h @@ -152,7 +152,7 @@ static inline void *acpi_os_acquire_object(acpi_cache_t * cache) #include #define ACPI_PREEMPTION_POINT() \ do { \ - if (!in_atomic_preempt_off()) \ + if (!in_atomic_preempt_off() && !irqs_disabled()) \ cond_resched(); \ } while (0) -- cgit v1.2.3 From da8ba01deb98f3dc0558b1f5a37e64f40bba7904 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Wed, 6 Jan 2010 22:07:37 +0100 Subject: eeepc-laptop: disable cpu speed control on EeePC 701 The EeePC 4G ("701") implements CFVS, but it is not supported by the pre-installed OS, and the original option to change it in the BIOS setup screen was removed in later versions. Judging by the lack of "Super Hybrid Engine" on Asus product pages, this applies to all "701" models (4G/4G Surf/2G Surf). So Asus made a deliberate decision not to support it on this model. We have several reports that using it can cause the system to hang [1]. That said, it does not happen all the time. Some users do not experience it at all (and apparently wish to continue "right-clocking"). Check for the EeePC 701 using DMI. If met, then disable writes to the "cpufv" sysfs attribute and log an explanatory message. Add a "cpufv_disabled" attribute which allow users to override this policy. Writing to this attribute will log a second message. The sysfs attribute is more useful than a module option, because it makes it easier for userspace scripts to provide consistent behaviour (according to user configuration), regardless of whether the kernel includes this change. [1] Signed-off-by: Alan Jenkins Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 87 +++++++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 5838c69b2fb3..e954f2af5724 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -35,6 +35,7 @@ #include #include #include +#include #define EEEPC_LAPTOP_VERSION "0.1" #define EEEPC_LAPTOP_NAME "Eee PC Hotkey Driver" @@ -159,6 +160,7 @@ struct eeepc_laptop { acpi_handle handle; /* the handle of the acpi device */ u32 cm_supported; /* the control methods supported by this BIOS */ + bool cpufv_disabled; u16 event_count[128]; /* count for each event */ struct platform_device *platform_device; @@ -378,6 +380,8 @@ static ssize_t store_cpufv(struct device *dev, struct eeepc_cpufv c; int rv, value; + if (eeepc->cpufv_disabled) + return -EPERM; if (get_cpufv(eeepc, &c)) return -ENODEV; rv = parse_arg(buf, count, &value); @@ -389,6 +393,41 @@ static ssize_t store_cpufv(struct device *dev, return rv; } +static ssize_t show_cpufv_disabled(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct eeepc_laptop *eeepc = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", eeepc->cpufv_disabled); +} + +static ssize_t store_cpufv_disabled(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct eeepc_laptop *eeepc = dev_get_drvdata(dev); + int rv, value; + + rv = parse_arg(buf, count, &value); + if (rv < 0) + return rv; + + switch (value) { + case 0: + if (eeepc->cpufv_disabled) + pr_warning("cpufv enabled (not officially supported " + "on this model)\n"); + eeepc->cpufv_disabled = false; + return rv; + case 1: + return -EPERM; + default: + return -EINVAL; + } +} + + static struct device_attribute dev_attr_cpufv = { .attr = { .name = "cpufv", @@ -404,12 +443,22 @@ static struct device_attribute dev_attr_available_cpufv = { .show = show_available_cpufv }; +static struct device_attribute dev_attr_cpufv_disabled = { + .attr = { + .name = "cpufv_disabled", + .mode = 0644 }, + .show = show_cpufv_disabled, + .store = store_cpufv_disabled +}; + + static struct attribute *platform_attributes[] = { &dev_attr_camera.attr, &dev_attr_cardr.attr, &dev_attr_disp.attr, &dev_attr_cpufv.attr, &dev_attr_available_cpufv.attr, + &dev_attr_cpufv_disabled.attr, NULL }; @@ -1261,6 +1310,42 @@ static void eeepc_acpi_notify(struct acpi_device *device, u32 event) } } +static void eeepc_dmi_check(struct eeepc_laptop *eeepc) +{ + const char *model; + + /* + * Blacklist for setting cpufv (cpu speed). + * + * EeePC 4G ("701") implements CFVS, but it is not supported + * by the pre-installed OS, and the original option to change it + * in the BIOS setup screen was removed in later versions. + * + * Judging by the lack of "Super Hybrid Engine" on Asus product pages, + * this applies to all "701" models (4G/4G Surf/2G Surf). + * + * So Asus made a deliberate decision not to support it on this model. + * We have several reports that using it can cause the system to hang + * + * The hang has also been reported on a "702" (Model name "8G"?). + * + * We avoid dmi_check_system() / dmi_match(), because they use + * substring matching. We don't want to affect the "701SD" + * and "701SDX" models, because they do support S.H.E. + */ + + model = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!model) + return; + + if (strcmp(model, "701") == 0 || strcmp(model, "702") == 0) { + eeepc->cpufv_disabled = true; + pr_info("model %s does not officially support setting cpu " + "speed\n", model); + pr_info("cpufv disabled to avoid instability\n"); + } +} + static void cmsg_quirk(struct eeepc_laptop *eeepc, int cm, const char *name) { int dummy; @@ -1342,6 +1427,8 @@ static int __devinit eeepc_acpi_add(struct acpi_device *device) strcpy(acpi_device_class(device), EEEPC_ACPI_CLASS); device->driver_data = eeepc; + eeepc_dmi_check(eeepc); + result = eeepc_acpi_init(eeepc, device); if (result) goto fail_platform; -- cgit v1.2.3 From 10ae4b5663ff3092553bfbd867e7bd474ce6c553 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Wed, 6 Jan 2010 22:07:38 +0100 Subject: eeepc-laptop: dmi blacklist to disable pci hotplug code This is a short term workaround for Eeepc 1005HA. refs: Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index e954f2af5724..7fc944ac2070 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -161,6 +161,7 @@ struct eeepc_laptop { u32 cm_supported; /* the control methods supported by this BIOS */ bool cpufv_disabled; + bool hotplug_disabled; u16 event_count[128]; /* count for each event */ struct platform_device *platform_device; @@ -845,6 +846,9 @@ static int eeepc_rfkill_init(struct eeepc_laptop *eeepc) if (result && result != -ENODEV) goto exit; + if (eeepc->hotplug_disabled) + return 0; + result = eeepc_setup_pci_hotplug(eeepc); /* * If we get -EBUSY then something else is handling the PCI hotplug - @@ -1314,6 +1318,10 @@ static void eeepc_dmi_check(struct eeepc_laptop *eeepc) { const char *model; + model = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!model) + return; + /* * Blacklist for setting cpufv (cpu speed). * @@ -1333,17 +1341,24 @@ static void eeepc_dmi_check(struct eeepc_laptop *eeepc) * substring matching. We don't want to affect the "701SD" * and "701SDX" models, because they do support S.H.E. */ - - model = dmi_get_system_info(DMI_PRODUCT_NAME); - if (!model) - return; - if (strcmp(model, "701") == 0 || strcmp(model, "702") == 0) { eeepc->cpufv_disabled = true; pr_info("model %s does not officially support setting cpu " "speed\n", model); pr_info("cpufv disabled to avoid instability\n"); } + + /* + * Blacklist for wlan hotplug + * + * Eeepc 1005HA doesn't work like others models and don't need the + * hotplug code. In fact, current hotplug code seems to unplug another + * device... + */ + if (strcmp(model, "1005HA") == 0) { + eeepc->hotplug_disabled = true; + pr_info("wlan hotplug disabled\n"); + } } static void cmsg_quirk(struct eeepc_laptop *eeepc, int cm, const char *name) -- cgit v1.2.3 From 642e0447cb910ceabae0b4ea6c0cd3449d5c5abb Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 6 Jan 2010 22:07:39 +0100 Subject: eeepc-laptop: switch to using sparse keymap library Signed-off-by: Dmitry Torokhov Tested-by: Alan Jenkins Acked-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/Kconfig | 1 + drivers/platform/x86/eeepc-laptop.c | 186 ++++++++++-------------------------- 2 files changed, 52 insertions(+), 135 deletions(-) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index db32c25e3605..f526e735c5ab 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -364,6 +364,7 @@ config EEEPC_LAPTOP select HWMON select LEDS_CLASS select NEW_LEDS + select INPUT_SPARSEKMAP ---help--- This driver supports the Fn-Fx keys on Eee PC laptops. diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 7fc944ac2070..07d7978c558f 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -121,38 +122,28 @@ static const char *cm_setv[] = { NULL, NULL, "PBPS", "TPDS" }; -struct key_entry { - char type; - u8 code; - u16 keycode; -}; - -enum { KE_KEY, KE_END }; - static const struct key_entry eeepc_keymap[] = { - /* Sleep already handled via generic ACPI code */ - {KE_KEY, 0x10, KEY_WLAN }, - {KE_KEY, 0x11, KEY_WLAN }, - {KE_KEY, 0x12, KEY_PROG1 }, - {KE_KEY, 0x13, KEY_MUTE }, - {KE_KEY, 0x14, KEY_VOLUMEDOWN }, - {KE_KEY, 0x15, KEY_VOLUMEUP }, - {KE_KEY, 0x16, KEY_DISPLAY_OFF }, - {KE_KEY, 0x1a, KEY_COFFEE }, - {KE_KEY, 0x1b, KEY_ZOOM }, - {KE_KEY, 0x1c, KEY_PROG2 }, - {KE_KEY, 0x1d, KEY_PROG3 }, - {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN }, - {KE_KEY, NOTIFY_BRN_MAX, KEY_BRIGHTNESSUP }, - {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE }, - {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE }, - {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE }, - {KE_KEY, 0x37, KEY_F13 }, /* Disable Touchpad */ - {KE_KEY, 0x38, KEY_F14 }, - {KE_END, 0}, + { KE_KEY, 0x10, { KEY_WLAN } }, + { KE_KEY, 0x11, { KEY_WLAN } }, + { KE_KEY, 0x12, { KEY_PROG1 } }, + { KE_KEY, 0x13, { KEY_MUTE } }, + { KE_KEY, 0x14, { KEY_VOLUMEDOWN } }, + { KE_KEY, 0x15, { KEY_VOLUMEUP } }, + { KE_KEY, 0x16, { KEY_DISPLAY_OFF } }, + { KE_KEY, 0x1a, { KEY_COFFEE } }, + { KE_KEY, 0x1b, { KEY_ZOOM } }, + { KE_KEY, 0x1c, { KEY_PROG2 } }, + { KE_KEY, 0x1d, { KEY_PROG3 } }, + { KE_KEY, NOTIFY_BRN_MIN, { KEY_BRIGHTNESSDOWN } }, + { KE_KEY, NOTIFY_BRN_MAX, { KEY_BRIGHTNESSUP } }, + { KE_KEY, 0x30, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 0x31, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 0x32, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 0x37, { KEY_F13 } }, /* Disable Touchpad */ + { KE_KEY, 0x38, { KEY_F14 } }, + { KE_END, 0 }, }; - /* * This is the main structure, we can use it to store useful information */ @@ -1143,120 +1134,42 @@ static void eeepc_backlight_exit(struct eeepc_laptop *eeepc) /* * Input device (i.e. hotkeys) */ -static struct key_entry *eeepc_get_entry_by_scancode( - struct eeepc_laptop *eeepc, - int code) +static int eeepc_input_init(struct eeepc_laptop *eeepc) { - struct key_entry *key; - - for (key = eeepc->keymap; key->type != KE_END; key++) - if (code == key->code) - return key; + struct input_dev *input; + int error; - return NULL; -} - -static void eeepc_input_notify(struct eeepc_laptop *eeepc, int event) -{ - static struct key_entry *key; - - key = eeepc_get_entry_by_scancode(eeepc, event); - if (key) { - switch (key->type) { - case KE_KEY: - input_report_key(eeepc->inputdev, key->keycode, - 1); - input_sync(eeepc->inputdev); - input_report_key(eeepc->inputdev, key->keycode, - 0); - input_sync(eeepc->inputdev); - break; - } + input = input_allocate_device(); + if (!input) { + pr_info("Unable to allocate input device\n"); + return -ENOMEM; } -} - -static struct key_entry *eeepc_get_entry_by_keycode( - struct eeepc_laptop *eeepc, int code) -{ - struct key_entry *key; - - for (key = eeepc->keymap; key->type != KE_END; key++) - if (code == key->keycode && key->type == KE_KEY) - return key; - return NULL; -} + input->name = "Asus EeePC extra buttons"; + input->phys = EEEPC_LAPTOP_FILE "/input0"; + input->id.bustype = BUS_HOST; + input->dev.parent = &eeepc->platform_device->dev; -static int eeepc_getkeycode(struct input_dev *dev, int scancode, int *keycode) -{ - struct eeepc_laptop *eeepc = input_get_drvdata(dev); - struct key_entry *key = eeepc_get_entry_by_scancode(eeepc, scancode); - - if (key && key->type == KE_KEY) { - *keycode = key->keycode; - return 0; + error = sparse_keymap_setup(input, eeepc_keymap, NULL); + if (error) { + pr_err("Unable to setup input device keymap\n"); + goto err_free_dev; } - return -EINVAL; -} - -static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode) -{ - struct eeepc_laptop *eeepc = input_get_drvdata(dev); - struct key_entry *key; - int old_keycode; - - if (keycode < 0 || keycode > KEY_MAX) - return -EINVAL; - - key = eeepc_get_entry_by_scancode(eeepc, scancode); - if (key && key->type == KE_KEY) { - old_keycode = key->keycode; - key->keycode = keycode; - set_bit(keycode, dev->keybit); - if (!eeepc_get_entry_by_keycode(eeepc, old_keycode)) - clear_bit(old_keycode, dev->keybit); - return 0; + error = input_register_device(input); + if (error) { + pr_err("Unable to register input device\n"); + goto err_free_keymap; } - return -EINVAL; -} - -static int eeepc_input_init(struct eeepc_laptop *eeepc) -{ - const struct key_entry *key; - int result; - - eeepc->inputdev = input_allocate_device(); - if (!eeepc->inputdev) { - pr_info("Unable to allocate input device\n"); - return -ENOMEM; - } - eeepc->inputdev->name = "Asus EeePC extra buttons"; - eeepc->inputdev->dev.parent = &eeepc->platform_device->dev; - eeepc->inputdev->phys = EEEPC_LAPTOP_FILE "/input0"; - eeepc->inputdev->id.bustype = BUS_HOST; - eeepc->inputdev->getkeycode = eeepc_getkeycode; - eeepc->inputdev->setkeycode = eeepc_setkeycode; - input_set_drvdata(eeepc->inputdev, eeepc); - - eeepc->keymap = kmemdup(eeepc_keymap, sizeof(eeepc_keymap), - GFP_KERNEL); - for (key = eeepc_keymap; key->type != KE_END; key++) { - switch (key->type) { - case KE_KEY: - set_bit(EV_KEY, eeepc->inputdev->evbit); - set_bit(key->keycode, eeepc->inputdev->keybit); - break; - } - } - result = input_register_device(eeepc->inputdev); - if (result) { - pr_info("Unable to register input device\n"); - input_free_device(eeepc->inputdev); - return result; - } + eeepc->inputdev = input; return 0; + + err_free_keymap: + sparse_keymap_free(input); + err_free_dev: + input_free_device(input); + return error; } static void eeepc_input_exit(struct eeepc_laptop *eeepc) @@ -1306,11 +1219,12 @@ static void eeepc_acpi_notify(struct acpi_device *device, u32 event) * event will be desired value (or else ignored) */ } - eeepc_input_notify(eeepc, event); + sparse_keymap_report_event(eeepc->inputdev, event, + 1, true); } } else { /* Everything else is a bona-fide keypress event */ - eeepc_input_notify(eeepc, event); + sparse_keymap_report_event(eeepc->inputdev, event, 1, true); } } @@ -1554,10 +1468,12 @@ static int __init eeepc_laptop_init(void) result = acpi_bus_register_driver(&eeepc_acpi_driver); if (result < 0) goto fail_acpi_driver; + if (!eeepc_device_present) { result = -ENODEV; goto fail_no_device; } + return 0; fail_no_device: -- cgit v1.2.3 From 322a1356be96bcc4b97e8e370f6468c821330077 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Wed, 6 Jan 2010 22:07:40 +0100 Subject: eeepc-laptop: add hotplug_disable parameter Some new models need to disable wireless hotplug. For the moment, we don't know excactly what models need that, except 1005HA. Users will be able to use that param as a workaround. Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 07d7978c558f..a959abdea3a7 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -50,6 +50,14 @@ MODULE_AUTHOR("Corentin Chary, Eric Cooper"); MODULE_DESCRIPTION(EEEPC_LAPTOP_NAME); MODULE_LICENSE("GPL"); +static bool hotplug_disabled; + +module_param(hotplug_disabled, bool, 0644); +MODULE_PARM_DESC(hotplug_disabled, + "Disable hotplug for wireless device. " + "If your laptop need that, please report to " + "acpi4asus-user@lists.sourceforge.net."); + /* * Definitions for Asus EeePC */ @@ -1356,6 +1364,8 @@ static int __devinit eeepc_acpi_add(struct acpi_device *device) strcpy(acpi_device_class(device), EEEPC_ACPI_CLASS); device->driver_data = eeepc; + eeepc->hotplug_disabled = hotplug_disabled; + eeepc_dmi_check(eeepc); result = eeepc_acpi_init(eeepc, device); -- cgit v1.2.3 From 4194e2f551a6308e6ab34ac88210bf54858aa7df Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Wed, 6 Jan 2010 22:07:41 +0100 Subject: eeepc-laptop: disable wireless hotplug for 1201N Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index a959abdea3a7..e2be6bb33d92 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -1277,7 +1277,7 @@ static void eeepc_dmi_check(struct eeepc_laptop *eeepc) * hotplug code. In fact, current hotplug code seems to unplug another * device... */ - if (strcmp(model, "1005HA") == 0) { + if (strcmp(model, "1005HA") == 0 || strcmp(model, "1201N") == 0) { eeepc->hotplug_disabled = true; pr_info("wlan hotplug disabled\n"); } -- cgit v1.2.3 From 7a0b73a49ab56fb1e836675c00d6d0d2ba39a714 Mon Sep 17 00:00:00 2001 From: Luck, Tony Date: Mon, 28 Dec 2009 10:39:23 -0800 Subject: ACPI: Fix section mismatch error for acpi_early_processor_set_pdc() Alex Chiang introduced acpi_early_processor_set_pdc() in commit: ACPI: processor: call _PDC early 78f1699659963fff97975df44db6d5dbe7218e55 But this results in a section mismatch: WARNING: drivers/acpi/acpi.o(.text+0xa9c1): Section mismatch in reference from the function acpi_early_processor_set_pdc() to the variable .cpuinit.data:processor_idle_dmi_table The function acpi_early_processor_set_pdc() references the variable __cpuinitdata processor_idle_dmi_table. This is often because acpi_early_processor_set_pdc lacks a __cpuinitdata annotation or the annotation of processor_idle_dmi_table is wrong. The only caller of acpi_early_processor_set_pdc() is acpi_bus_init() which is an "__init" function. So the correct fix here is to mark acpi_early_processor_set_pdc() "__init" too. Signed-off-by: Tony Luck Acked-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/processor_pdc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c index 30e4dc0cdf30..7d4ee394d0b3 100644 --- a/drivers/acpi/processor_pdc.c +++ b/drivers/acpi/processor_pdc.c @@ -151,7 +151,7 @@ early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; } -void acpi_early_processor_set_pdc(void) +void __init acpi_early_processor_set_pdc(void) { /* * Check whether the system is DMI table. If yes, OSPM -- cgit v1.2.3 From c14973f93027500301fc40333e16ae49e58923a7 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 10 Jan 2010 00:15:44 -0800 Subject: sony-laptop - fix using of uninitialized variable CC [M] drivers/platform/x86/sony-laptop.o drivers/platform/x86/sony-laptop.c: In function 'sony_nc_rfkill_setup': drivers/platform/x86/sony-laptop.c:1162: warning: 'i' may be used uninitialized in this function Signed-off-by: Dmitry Torokhov Acked-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/platform/x86/sony-laptop.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 5af53340da6f..3f71a605a492 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1201,9 +1201,12 @@ static void sony_nc_rfkill_setup(struct acpi_device *device) /* the buffer is filled with magic numbers describing the devices * available, 0xff terminates the enumeration */ - while ((dev_code = *(device_enum->buffer.pointer + i)) != 0xff && - i < device_enum->buffer.length) { - i++; + for (i = 0; i < device_enum->buffer.length; i++) { + + dev_code = *(device_enum->buffer.pointer + i); + if (dev_code == 0xff) + break; + dprintk("Radio devices, looking at 0x%.2x\n", dev_code); if (dev_code == 0 && !sony_rfkill_devices[SONY_WIFI]) -- cgit v1.2.3 From c97adf9e7bebf17a86b95e2131bf9ba76c4857c7 Mon Sep 17 00:00:00 2001 From: Márton Németh Date: Sun, 10 Jan 2010 17:15:36 +0100 Subject: acpi: make ACPI device id constant The ids field of the struct acpi_driver is constant in so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Márton Németh Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Len Brown --- drivers/acpi/pci_link.c | 2 +- drivers/acpi/pci_root.c | 2 +- drivers/acpi/power.c | 2 +- drivers/acpi/power_meter.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 394ae89409c2..04b0f007c9b7 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -56,7 +56,7 @@ ACPI_MODULE_NAME("pci_link"); static int acpi_pci_link_add(struct acpi_device *device); static int acpi_pci_link_remove(struct acpi_device *device, int type); -static struct acpi_device_id link_device_ids[] = { +static const struct acpi_device_id link_device_ids[] = { {"PNP0C0F", 0}, {"", 0}, }; diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 101cce3681d1..64f55b6db73c 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -46,7 +46,7 @@ static int acpi_pci_root_add(struct acpi_device *device); static int acpi_pci_root_remove(struct acpi_device *device, int type); static int acpi_pci_root_start(struct acpi_device *device); -static struct acpi_device_id root_device_ids[] = { +static const struct acpi_device_id root_device_ids[] = { {"PNP0A03", 0}, {"", 0}, }; diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 22b297916519..0f30c3c1eea4 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -65,7 +65,7 @@ static int acpi_power_remove(struct acpi_device *device, int type); static int acpi_power_resume(struct acpi_device *device); static int acpi_power_open_fs(struct inode *inode, struct file *file); -static struct acpi_device_id power_device_ids[] = { +static const struct acpi_device_id power_device_ids[] = { {ACPI_POWER_HID, 0}, {"", 0}, }; diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index 2ef7030a0c28..ca75c36f754c 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -64,7 +64,7 @@ static int can_cap_in_hardware(void) return force_cap_on || cap_in_hardware; } -static struct acpi_device_id power_meter_ids[] = { +static const struct acpi_device_id power_meter_ids[] = { {"ACPI000D", 0}, {"", 0}, }; -- cgit v1.2.3 From c19bdb6126a5e1f43b4a4fc3c4b09c926667e5ef Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Sun, 3 Jan 2010 19:27:56 +0600 Subject: ACPI: Fix unused variable warning in sbs.c When CONFIG_ACPI_SYSFS_POWER=n and CONFIG_ACPI_PROCFS_POWER=n, then we're warned by the following warning: drivers/acpi/sbs.c: In function `acpi_battery_remove': drivers/acpi/sbs.c:825: warning: unused variable `battery' Signed-off-by: Rakib Mullick Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/sbs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index 52b9db8afc20..b16ddbf23a9c 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -822,7 +822,10 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id) static void acpi_battery_remove(struct acpi_sbs *sbs, int id) { +#if defined(CONFIG_ACPI_SYSFS_POWER) || defined(CONFIG_ACPI_PROCFS_POWER) struct acpi_battery *battery = &sbs->battery[id]; +#endif + #ifdef CONFIG_ACPI_SYSFS_POWER if (battery->bat.dev) { if (battery->have_sysfs_alarm) -- cgit v1.2.3 From 8f06d7e6e1bbfb32698d6d455583ab7460c090e2 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sat, 16 Jan 2010 12:53:19 -0800 Subject: perf timechart: Use tid not pid for COMM change A process that changes its comm field, does this on a per kernel task struct basis. The timechart tool used, incorrectly, the pid to track this, and should have used the tid instead... Signed-off-by: Arjan van de Ven Cc: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker CC: LKML-Reference: <20100116125319.34ac3edd@infradead.org> Signed-off-by: Ingo Molnar --- tools/perf/builtin-timechart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c index a589a43112d6..3f8bbcfb1e9b 100644 --- a/tools/perf/builtin-timechart.c +++ b/tools/perf/builtin-timechart.c @@ -280,7 +280,7 @@ static u64 cpus_pstate_state[MAX_CPUS]; static int process_comm_event(event_t *event, struct perf_session *session __used) { - pid_set_comm(event->comm.pid, event->comm.comm); + pid_set_comm(event->comm.tid, event->comm.comm); return 0; } -- cgit v1.2.3 From 0bb7a95f5455cd87e6a69e5818bc1f509a98d187 Mon Sep 17 00:00:00 2001 From: Luca Barbieri Date: Sat, 16 Jan 2010 10:39:30 +0100 Subject: hw-breakpoints, perf: Fix broken mmiotrace due to dr6 by reference change Commit 62edab9056a6cf0c9207339c8892c923a5217e45 (from June 2009 but merged in 2.6.33) changes notify_die to pass dr6 by reference. However, it forgets to fix the check for DR_STEP in kmmio.c, breaking mmiotrace. It also passes a wrong value to the post handler. This simple fix makes mmiotrace work again. Signed-off-by: Luca Barbieri Acked-by: K.Prasad Cc: Frederic Weisbecker LKML-Reference: <1263634770-14578-1-git-send-email-luca@luca-barbieri.com> Signed-off-by: Ingo Molnar --- arch/x86/mm/kmmio.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index c0f6198565eb..536fb6823366 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -538,14 +538,15 @@ static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args) { struct die_args *arg = args; + unsigned long* dr6_p = (unsigned long *)ERR_PTR(arg->err); - if (val == DIE_DEBUG && (arg->err & DR_STEP)) - if (post_kmmio_handler(arg->err, arg->regs) == 1) { + if (val == DIE_DEBUG && (*dr6_p & DR_STEP)) + if (post_kmmio_handler(*dr6_p, arg->regs) == 1) { /* * Reset the BS bit in dr6 (pointed by args->err) to * denote completion of processing */ - (*(unsigned long *)ERR_PTR(arg->err)) &= ~DR_STEP; + *dr6_p &= ~DR_STEP; return NOTIFY_STOP; } -- cgit v1.2.3 From 406266ab9ac8ed8b085c58aacd9e3161480dc5d5 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Wed, 9 Dec 2009 22:00:38 +0000 Subject: btrfs: fix missing last-entry in readdir(3) parent 49313cdac7b34c9f7ecbb1780cfc648b1c082cd7 (v2.6.32-1-g49313cd) commit ff48c08e1c05c67e8348ab6f8a24de8034e0e34d Author: Jan Engelhardt Date: Wed Dec 9 22:57:36 2009 +0100 Btrfs: fix missing last-entry in readdir(3) When one does a 32-bit readdir(3), the last entry of a directory is missing. This is however not due to passing a large value to filldir, but it seems to have to do with glibc doing telldir or something quirky. In any case, this patch fixes it in practice. Signed-off-by: Jan Engelhardt Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 5440bab23635..d5aa97310943 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3995,7 +3995,11 @@ skip: /* Reached end of directory/root. Bump pos past the last item. */ if (key_type == BTRFS_DIR_INDEX_KEY) - filp->f_pos = INT_LIMIT(off_t); + /* + * 32-bit glibc will use getdents64, but then strtol - + * so the last number we can serve is this. + */ + filp->f_pos = 0x7fffffff; else filp->f_pos++; nopos: -- cgit v1.2.3 From a038fab0cb873c75d6675e2bcffce8a3935bdce7 Mon Sep 17 00:00:00 2001 From: Yan, Zheng Date: Mon, 28 Dec 2009 05:01:58 +0000 Subject: Btrfs: align offsets for btrfs_ordered_update_i_size Some callers of btrfs_ordered_update_i_size can now pass in a NULL for the ordered extent to update against. This makes sure we properly align the offset they pass in when deciding how much to bump the on disk i_size. Signed-off-by: Chris Mason --- fs/btrfs/ordered-data.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index b10a49d4bc6a..5c2a9e78a949 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -626,6 +626,8 @@ int btrfs_ordered_update_i_size(struct inode *inode, u64 offset, if (ordered) offset = entry_end(ordered); + else + offset = ALIGN(offset, BTRFS_I(inode)->root->sectorsize); mutex_lock(&tree->mutex); disk_i_size = BTRFS_I(inode)->disk_i_size; -- cgit v1.2.3 From 2423fdfb96e3f9ff3baeb6c4c78d74145547891d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 6 Jan 2010 16:57:22 +0000 Subject: Btrfs, fix memory leaks in error paths Stanse found 2 memory leaks in relocate_block_group and __btrfs_map_block. cluster and multi are not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby Cc: linux-btrfs@vger.kernel.org Signed-off-by: Chris Mason --- fs/btrfs/relocation.c | 4 +++- fs/btrfs/volumes.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index a9728680eca8..ed3e4a2ec2c8 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3281,8 +3281,10 @@ static noinline_for_stack int relocate_block_group(struct reloc_control *rc) return -ENOMEM; path = btrfs_alloc_path(); - if (!path) + if (!path) { + kfree(cluster); return -ENOMEM; + } rc->extents_found = 0; rc->extents_skipped = 0; diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 198cff28766d..220dad5db017 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2649,8 +2649,10 @@ again: em = lookup_extent_mapping(em_tree, logical, *length); read_unlock(&em_tree->lock); - if (!em && unplug_page) + if (!em && unplug_page) { + kfree(multi); return 0; + } if (!em) { printk(KERN_CRIT "unable to find logical %llu len %llu\n", -- cgit v1.2.3 From 6c7d54ac87f338c479d9729e8392eca3f76e11e1 Mon Sep 17 00:00:00 2001 From: Yan, Zheng Date: Fri, 15 Jan 2010 08:43:09 +0000 Subject: Btrfs: Fix race in btrfs_mark_extent_written Fix bug reported by Johannes Hirte. The reason of that bug is btrfs_del_items is called after btrfs_duplicate_item and btrfs_del_items triggers tree balance. The fix is check that case and call btrfs_search_slot when needed. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/file.c | 100 ++++++++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 80 insertions(+), 20 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 3bfe9f03990b..ae96fdae1f7d 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -506,7 +506,8 @@ next_slot: } static int extent_mergeable(struct extent_buffer *leaf, int slot, - u64 objectid, u64 bytenr, u64 *start, u64 *end) + u64 objectid, u64 bytenr, u64 orig_offset, + u64 *start, u64 *end) { struct btrfs_file_extent_item *fi; struct btrfs_key key; @@ -522,6 +523,7 @@ static int extent_mergeable(struct extent_buffer *leaf, int slot, fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item); if (btrfs_file_extent_type(leaf, fi) != BTRFS_FILE_EXTENT_REG || btrfs_file_extent_disk_bytenr(leaf, fi) != bytenr || + btrfs_file_extent_offset(leaf, fi) != key.offset - orig_offset || btrfs_file_extent_compression(leaf, fi) || btrfs_file_extent_encryption(leaf, fi) || btrfs_file_extent_other_encoding(leaf, fi)) @@ -561,6 +563,7 @@ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, u64 split; int del_nr = 0; int del_slot = 0; + int recow; int ret; btrfs_drop_extent_cache(inode, start, end - 1, 0); @@ -568,6 +571,7 @@ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, path = btrfs_alloc_path(); BUG_ON(!path); again: + recow = 0; split = start; key.objectid = inode->i_ino; key.type = BTRFS_EXTENT_DATA_KEY; @@ -591,12 +595,60 @@ again: bytenr = btrfs_file_extent_disk_bytenr(leaf, fi); num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi); orig_offset = key.offset - btrfs_file_extent_offset(leaf, fi); + memcpy(&new_key, &key, sizeof(new_key)); + + if (start == key.offset && end < extent_end) { + other_start = 0; + other_end = start; + if (extent_mergeable(leaf, path->slots[0] - 1, + inode->i_ino, bytenr, orig_offset, + &other_start, &other_end)) { + new_key.offset = end; + btrfs_set_item_key_safe(trans, root, path, &new_key); + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); + btrfs_set_file_extent_num_bytes(leaf, fi, + extent_end - end); + btrfs_set_file_extent_offset(leaf, fi, + end - orig_offset); + fi = btrfs_item_ptr(leaf, path->slots[0] - 1, + struct btrfs_file_extent_item); + btrfs_set_file_extent_num_bytes(leaf, fi, + end - other_start); + btrfs_mark_buffer_dirty(leaf); + goto out; + } + } + + if (start > key.offset && end == extent_end) { + other_start = end; + other_end = 0; + if (extent_mergeable(leaf, path->slots[0] + 1, + inode->i_ino, bytenr, orig_offset, + &other_start, &other_end)) { + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); + btrfs_set_file_extent_num_bytes(leaf, fi, + start - key.offset); + path->slots[0]++; + new_key.offset = start; + btrfs_set_item_key_safe(trans, root, path, &new_key); + + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); + btrfs_set_file_extent_num_bytes(leaf, fi, + other_end - start); + btrfs_set_file_extent_offset(leaf, fi, + start - orig_offset); + btrfs_mark_buffer_dirty(leaf); + goto out; + } + } while (start > key.offset || end < extent_end) { if (key.offset == start) split = end; - memcpy(&new_key, &key, sizeof(new_key)); new_key.offset = split; ret = btrfs_duplicate_item(trans, root, path, &new_key); if (ret == -EAGAIN) { @@ -631,15 +683,18 @@ again: path->slots[0]--; extent_end = end; } + recow = 1; } - fi = btrfs_item_ptr(leaf, path->slots[0], - struct btrfs_file_extent_item); - other_start = end; other_end = 0; - if (extent_mergeable(leaf, path->slots[0] + 1, inode->i_ino, - bytenr, &other_start, &other_end)) { + if (extent_mergeable(leaf, path->slots[0] + 1, + inode->i_ino, bytenr, orig_offset, + &other_start, &other_end)) { + if (recow) { + btrfs_release_path(root, path); + goto again; + } extent_end = other_end; del_slot = path->slots[0] + 1; del_nr++; @@ -650,8 +705,13 @@ again: } other_start = 0; other_end = start; - if (extent_mergeable(leaf, path->slots[0] - 1, inode->i_ino, - bytenr, &other_start, &other_end)) { + if (extent_mergeable(leaf, path->slots[0] - 1, + inode->i_ino, bytenr, orig_offset, + &other_start, &other_end)) { + if (recow) { + btrfs_release_path(root, path); + goto again; + } key.offset = other_start; del_slot = path->slots[0]; del_nr++; @@ -660,22 +720,22 @@ again: inode->i_ino, orig_offset); BUG_ON(ret); } + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); if (del_nr == 0) { btrfs_set_file_extent_type(leaf, fi, BTRFS_FILE_EXTENT_REG); btrfs_mark_buffer_dirty(leaf); - goto out; - } - - fi = btrfs_item_ptr(leaf, del_slot - 1, - struct btrfs_file_extent_item); - btrfs_set_file_extent_type(leaf, fi, BTRFS_FILE_EXTENT_REG); - btrfs_set_file_extent_num_bytes(leaf, fi, - extent_end - key.offset); - btrfs_mark_buffer_dirty(leaf); + } else { + btrfs_set_file_extent_type(leaf, fi, + BTRFS_FILE_EXTENT_REG); + btrfs_set_file_extent_num_bytes(leaf, fi, + extent_end - key.offset); + btrfs_mark_buffer_dirty(leaf); - ret = btrfs_del_items(trans, root, path, del_slot, del_nr); - BUG_ON(ret); + ret = btrfs_del_items(trans, root, path, del_slot, del_nr); + BUG_ON(ret); + } out: btrfs_free_path(path); return 0; -- cgit v1.2.3 From 6c090a11e1c403b727a6a8eff0b97d5fb9e95cb5 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 15 Jan 2010 20:08:22 +0000 Subject: Btrfs: fix regression in orphan cleanup Currently orphan cleanup only ever gets triggered if we cross subvolumes during a lookup, which means that if we just mount a plain jane fs that has orphans in it, they will never get cleaned up. This results in panic's like these http://www.kerneloops.org/oops.php?number=1109085 where adding an orphan entry results in -EEXIST being returned and we panic. In order to fix this, we check to see on lookup if our root has had the orphan cleanup done, and if not go ahead and do it. This is easily reproduceable by running this testcase #include #include #include #include #include #include int main(int argc, char **argv) { char data[4096]; char newdata[4096]; int fd1, fd2; memset(data, 'a', 4096); memset(newdata, 'b', 4096); while (1) { int i; fd1 = creat("file1", 0666); if (fd1 < 0) break; for (i = 0; i < 512; i++) write(fd1, data, 4096); fsync(fd1); close(fd1); fd2 = creat("file2", 0666); if (fd2 < 0) break; ftruncate(fd2, 4096 * 512); for (i = 0; i < 512; i++) write(fd2, newdata, 4096); close(fd2); i = rename("file2", "file1"); unlink("file1"); } return 0; } and then pulling the power on the box, and then trying to run that test again when the box comes back up. I've tested this locally and it fixes the problem. Thanks to Tomas Carnecky for helping me track this down initially. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index d5aa97310943..b330e27c2d8b 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3796,6 +3796,12 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry) if (location.type == BTRFS_INODE_ITEM_KEY) { inode = btrfs_iget(dir->i_sb, &location, root); + if (unlikely(root->clean_orphans) && + !(inode->i_sb->s_flags & MS_RDONLY)) { + down_read(&root->fs_info->cleanup_work_sem); + btrfs_orphan_cleanup(root); + up_read(&root->fs_info->cleanup_work_sem); + } return inode; } -- cgit v1.2.3 From a9cc71a60c29a09174bee2fcef8f924c529fd4b7 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Sun, 17 Jan 2010 20:36:18 -0500 Subject: Btrfs: deal with NULL acl sent to btrfs_set_acl It is legal for btrfs_set_acl to be sent a NULL acl. This makes sure we don't dereference it. A similar patch was sent by Johannes Hirte Signed-off-by: Chris Mason --- fs/btrfs/acl.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c index 1898f8555f06..fa44e92e9b8f 100644 --- a/fs/btrfs/acl.c +++ b/fs/btrfs/acl.c @@ -112,12 +112,14 @@ static int btrfs_set_acl(struct btrfs_trans_handle *trans, switch (type) { case ACL_TYPE_ACCESS: mode = inode->i_mode; - ret = posix_acl_equiv_mode(acl, &mode); - if (ret < 0) - return ret; - ret = 0; - inode->i_mode = mode; name = POSIX_ACL_XATTR_ACCESS; + if (acl) { + ret = posix_acl_equiv_mode(acl, &mode); + if (ret < 0) + return ret; + inode->i_mode = mode; + } + ret = 0; break; case ACL_TYPE_DEFAULT: if (!S_ISDIR(inode->i_mode)) -- cgit v1.2.3 From 11dfe35a0108097f2df1f042c485fa7f758c2cdf Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 13 Nov 2009 20:12:59 +0000 Subject: Btrfs: fix possible panic on unmount We can race with the unmount of an fs and the stopping of a kthread where we will free the block group before we're done using it. The reason for this is because we do not hold a reference on the block group while its caching, since the allocator drops its reference once it exits or moves on to the next block group. This patch fixes the problem by taking a reference to the block group before we start caching and dropping it when we're done to make sure all accesses to the block group are safe. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 56e50137d0e6..432a2da4641e 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -83,6 +83,17 @@ static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits) return (cache->flags & bits) == bits; } +void btrfs_get_block_group(struct btrfs_block_group_cache *cache) +{ + atomic_inc(&cache->count); +} + +void btrfs_put_block_group(struct btrfs_block_group_cache *cache) +{ + if (atomic_dec_and_test(&cache->count)) + kfree(cache); +} + /* * this adds the block group to the fs_info rb tree for the block group * cache @@ -156,7 +167,7 @@ block_group_cache_tree_search(struct btrfs_fs_info *info, u64 bytenr, } } if (ret) - atomic_inc(&ret->count); + btrfs_get_block_group(ret); spin_unlock(&info->block_group_cache_lock); return ret; @@ -407,6 +418,8 @@ err: put_caching_control(caching_ctl); atomic_dec(&block_group->space_info->caching_threads); + btrfs_put_block_group(block_group); + return 0; } @@ -447,6 +460,7 @@ static int cache_block_group(struct btrfs_block_group_cache *cache) up_write(&fs_info->extent_commit_sem); atomic_inc(&cache->space_info->caching_threads); + btrfs_get_block_group(cache); tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n", cache->key.objectid); @@ -486,12 +500,6 @@ struct btrfs_block_group_cache *btrfs_lookup_block_group( return cache; } -void btrfs_put_block_group(struct btrfs_block_group_cache *cache) -{ - if (atomic_dec_and_test(&cache->count)) - kfree(cache); -} - static struct btrfs_space_info *__find_space_info(struct btrfs_fs_info *info, u64 flags) { @@ -2582,7 +2590,7 @@ next_block_group(struct btrfs_root *root, if (node) { cache = rb_entry(node, struct btrfs_block_group_cache, cache_node); - atomic_inc(&cache->count); + btrfs_get_block_group(cache); } else cache = NULL; spin_unlock(&root->fs_info->block_group_cache_lock); @@ -4227,7 +4235,7 @@ search: u64 offset; int cached; - atomic_inc(&block_group->count); + btrfs_get_block_group(block_group); search_start = block_group->key.objectid; have_block_group: @@ -4315,7 +4323,7 @@ have_block_group: btrfs_put_block_group(block_group); block_group = last_ptr->block_group; - atomic_inc(&block_group->count); + btrfs_get_block_group(block_group); spin_unlock(&last_ptr->lock); spin_unlock(&last_ptr->refill_lock); @@ -7395,9 +7403,7 @@ int btrfs_free_block_groups(struct btrfs_fs_info *info) wait_block_group_cache_done(block_group); btrfs_remove_free_space_cache(block_group); - - WARN_ON(atomic_read(&block_group->count) != 1); - kfree(block_group); + btrfs_put_block_group(block_group); spin_lock(&info->block_group_cache_lock); } -- cgit v1.2.3 From c718aff2e673a4f42de2a8b9f43bbfd700ce9544 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 24 Dec 2009 08:31:44 +0000 Subject: sh: ms7724: Correct sh-eth EEPROM polling timeout. This converts the cpu_relax() to a udelay(1), which fixes up issues with the EEPROM polling occasionally timing out. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 5d0f70b46c97..858ecb25d469 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -533,7 +533,7 @@ static int __init sh_eth_is_eeprom_ready(void) while (t--) { if (!ctrl_inw(EEPROM_STAT)) return 1; - cpu_relax(); + udelay(1); } printk(KERN_ERR "ms7724se can not access to eeprom\n"); -- cgit v1.2.3 From 6eacb2c4cba4c84c2aee13f416cd476777e8400a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 19 Jan 2010 17:00:06 +0900 Subject: sh: unwire sys_recvmmsg. sh32 at the moment only uses sys_socketcall to reach these, so unwire recvmmsg for now. While we're at it, add it to the ignore list, as per the s390 change. Signed-off-by: Paul Mundt --- arch/sh/include/asm/unistd_32.h | 5 +++-- arch/sh/kernel/syscalls_32.S | 1 - 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h index f18c4f9baf27..365744b05269 100644 --- a/arch/sh/include/asm/unistd_32.h +++ b/arch/sh/include/asm/unistd_32.h @@ -345,12 +345,13 @@ #define __NR_pwritev 334 #define __NR_rt_tgsigqueueinfo 335 #define __NR_perf_event_open 336 -#define __NR_recvmmsg 337 -#define NR_syscalls 338 +#define NR_syscalls 337 #ifdef __KERNEL__ +#define __IGNORE_recvmmsg + #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_OLD_STAT diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index 4bd5a1146956..19fd11dd9871 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -353,4 +353,3 @@ ENTRY(sys_call_table) .long sys_pwritev .long sys_rt_tgsigqueueinfo /* 335 */ .long sys_perf_event_open - .long sys_recvmmsg -- cgit v1.2.3 From 79f211b8e17205aae0304c58518fbc58506e52e3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 19 Jan 2010 17:00:31 +0900 Subject: sh64: wire up sys_accept4. sh64 on the other hand provides both direct broken out syscalls as well as socketcall access. As there are binaries that use both socketcall has to stay around. The current ABI prefers direct syscalls. It was pointed out that when sys_recvmmsg was added in, sys_accept4 was overlooked. This takes care of wiring it up. Signed-off-by: Paul Mundt --- arch/sh/include/asm/unistd_64.h | 3 ++- arch/sh/kernel/syscalls_64.S | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h index 3e7645d11130..25de158aac3a 100644 --- a/arch/sh/include/asm/unistd_64.h +++ b/arch/sh/include/asm/unistd_64.h @@ -386,10 +386,11 @@ #define __NR_rt_tgsigqueueinfo 363 #define __NR_perf_event_open 364 #define __NR_recvmmsg 365 +#define __NR_accept4 366 #ifdef __KERNEL__ -#define NR_syscalls 366 +#define NR_syscalls 367 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index 07d2aaea9ae8..2048a20d7c80 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -392,3 +392,4 @@ sys_call_table: .long sys_rt_tgsigqueueinfo .long sys_perf_event_open .long sys_recvmmsg /* 365 */ + .long sys_accept4 -- cgit v1.2.3 From f06f135d8642e2f6812cfcb4ea8e4e9122d4d58c Mon Sep 17 00:00:00 2001 From: Thiago Farina Date: Tue, 19 Jan 2010 14:07:09 +0100 Subject: fs/bio.c: fix shadows sparse warning fs/bio.c:81:33: warning: symbol 'bslab' shadows an earlier one fs/bio.c:74:25: originally declared here Signed-off-by: Thiago Farina Signed-off-by: Jens Axboe --- fs/bio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bio.c b/fs/bio.c index 76e6713abf94..12429c9553eb 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -78,7 +78,7 @@ static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size) i = 0; while (i < bio_slab_nr) { - struct bio_slab *bslab = &bio_slabs[i]; + bslab = &bio_slabs[i]; if (!bslab->slab && entry == -1) entry = i; -- cgit v1.2.3 From ad3e6c0b1fad31282a8384903ed811671d840a9c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 19 Jan 2010 16:42:12 +0100 Subject: ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot() We need to do that if we tinker with the MMU entries. This fixes the occasional bug with kexec where the new fails to uncompress with "crc error". Most likely at least kexec on v6 and v7 need this fix. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 1708da82da96..761ffede6a23 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1067,4 +1067,6 @@ void setup_mm_for_reboot(char mode) pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1))); flush_pmd_entry(pmd); } + + local_flush_tlb_all(); } -- cgit v1.2.3 From 1f667c690be3ab71036c436d8391105eee23f65b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 19 Jan 2010 17:01:33 +0100 Subject: ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec work The comments in arm_machine_restart() suggest that cpu_proc_fin() will clean and disable cache and turn off interrupts. This does not seem to be implemented for proc-v7.S, implement it the same way as for proc-v6.S. This also makes kexec work for v7. Note that a related TLB and branch traget flush patch is also needed to avoid kexec "crc error". Note that there are still some issues that seem to be related to L2 cache being on and causing occasional uncompress "crc error" with kexec. Anyways, this gets kexec mostly working on V7 for now. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3a285218fd15..d2a80747c6fe 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -45,7 +45,14 @@ ENTRY(cpu_v7_proc_init) ENDPROC(cpu_v7_proc_init) ENTRY(cpu_v7_proc_fin) - mov pc, lr + stmfd sp!, {lr} + cpsid if @ disable interrupts + bl v7_flush_kern_cache_all + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1000 @ ...i............ + bic r0, r0, #0x0006 @ .............ca. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldmfd sp!, {pc} ENDPROC(cpu_v7_proc_fin) /* -- cgit v1.2.3 From 2045124ffd1a5e46d157349016a2c50f19c8c91d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 19 Jan 2010 23:42:08 +0100 Subject: ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 and V7 comments The comments in cacheflush.h should follow what's in struct cpu_cache_fns. The comments for V6 and V7 are unnecessary. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/include/asm/cacheflush.h | 20 +++++++++++++++++--- arch/arm/mm/proc-v6.S | 2 -- arch/arm/mm/proc-v7.S | 2 -- 3 files changed, 17 insertions(+), 7 deletions(-) diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 730aefcfbee3..c77d2fa1f6e5 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -154,16 +154,16 @@ * Please note that the implementation of these, and the required * effects are cache-type (VIVT/VIPT/PIPT) specific. * - * flush_cache_kern_all() + * flush_kern_all() * * Unconditionally clean and invalidate the entire cache. * - * flush_cache_user_mm(mm) + * flush_user_all() * * Clean and invalidate all user space cache entries * before a change of page tables. * - * flush_cache_user_range(start, end, flags) + * flush_user_range(start, end, flags) * * Clean and invalidate a range of cache entries in the * specified address space before a change of page tables. @@ -179,6 +179,20 @@ * - start - virtual start address * - end - virtual end address * + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * - start - virtual start address + * - end - virtual end address + * + * flush_kern_dcache_area(kaddr, size) + * + * Ensure that the data held in page is written back. + * - kaddr - page address + * - size - region size + * * DMA Cache Coherency * =================== * diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 395cc90c6613..7a5337ed7d68 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -59,8 +59,6 @@ ENTRY(cpu_v6_proc_fin) * to what would be the reset vector. * * - loc - location to jump to for soft reset - * - * It is assumed that: */ .align 5 ENTRY(cpu_v6_reset) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index d2a80747c6fe..7aaf88a3b7aa 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -63,8 +63,6 @@ ENDPROC(cpu_v7_proc_fin) * to what would be the reset vector. * * - loc - location to jump to for soft reset - * - * It is assumed that: */ .align 5 ENTRY(cpu_v7_reset) -- cgit v1.2.3 From 5f3ef64f4da1c587cdcfaaac72311225b7df094c Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 14 Oct 2009 16:18:27 -0500 Subject: eCryptfs: Use notify_change for truncating lower inodes When truncating inodes in the lower filesystem, eCryptfs directly invoked vmtruncate(). As Christoph Hellwig pointed out, vmtruncate() is a filesystem helper function, but filesystems may need to do more than just a call to vmtruncate(). This patch moves the lower inode truncation out of ecryptfs_truncate() and renames the function to truncate_upper(). truncate_upper() updates an iattr for the lower inode to indicate if the lower inode needs to be truncated upon return. ecryptfs_setattr() then calls notify_change(), using the updated iattr for the lower inode, to complete the truncation. For eCryptfs functions needing to truncate, ecryptfs_truncate() is reintroduced as a simple way to truncate the upper inode to a specified size and then truncate the lower inode accordingly. https://bugs.launchpad.net/bugs/451368 Reported-by: Christoph Hellwig Acked-by: Dustin Kirkland Cc: ecryptfs-devel@lists.launchpad.net Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Tyler Hicks --- fs/ecryptfs/inode.c | 99 ++++++++++++++++++++++++++++++++++++----------------- 1 file changed, 67 insertions(+), 32 deletions(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 7f8545032930..2b449d79b7fa 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -772,18 +772,23 @@ upper_size_to_lower_size(struct ecryptfs_crypt_stat *crypt_stat, } /** - * ecryptfs_truncate + * truncate_upper * @dentry: The ecryptfs layer dentry - * @new_length: The length to expand the file to + * @ia: Address of the ecryptfs inode's attributes + * @lower_ia: Address of the lower inode's attributes * * Function to handle truncations modifying the size of the file. Note * that the file sizes are interpolated. When expanding, we are simply - * writing strings of 0's out. When truncating, we need to modify the - * underlying file size according to the page index interpolations. + * writing strings of 0's out. When truncating, we truncate the upper + * inode and update the lower_ia according to the page index + * interpolations. If ATTR_SIZE is set in lower_ia->ia_valid upon return, + * the caller must use lower_ia in a call to notify_change() to perform + * the truncation of the lower inode. * * Returns zero on success; non-zero otherwise */ -int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) +static int truncate_upper(struct dentry *dentry, struct iattr *ia, + struct iattr *lower_ia) { int rc = 0; struct inode *inode = dentry->d_inode; @@ -794,8 +799,10 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) loff_t lower_size_before_truncate; loff_t lower_size_after_truncate; - if (unlikely((new_length == i_size))) + if (unlikely((ia->ia_size == i_size))) { + lower_ia->ia_valid &= ~ATTR_SIZE; goto out; + } crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat; /* Set up a fake ecryptfs file, this is used to interface with * the file in the underlying filesystem so that the @@ -815,28 +822,30 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) &fake_ecryptfs_file, ecryptfs_inode_to_private(dentry->d_inode)->lower_file); /* Switch on growing or shrinking file */ - if (new_length > i_size) { + if (ia->ia_size > i_size) { char zero[] = { 0x00 }; + lower_ia->ia_valid &= ~ATTR_SIZE; /* Write a single 0 at the last position of the file; * this triggers code that will fill in 0's throughout * the intermediate portion of the previous end of the * file and the new and of the file */ rc = ecryptfs_write(&fake_ecryptfs_file, zero, - (new_length - 1), 1); - } else { /* new_length < i_size_read(inode) */ - /* We're chopping off all the pages down do the page - * in which new_length is located. Fill in the end of - * that page from (new_length & ~PAGE_CACHE_MASK) to + (ia->ia_size - 1), 1); + } else { /* ia->ia_size < i_size_read(inode) */ + /* We're chopping off all the pages down to the page + * in which ia->ia_size is located. Fill in the end of + * that page from (ia->ia_size & ~PAGE_CACHE_MASK) to * PAGE_CACHE_SIZE with zeros. */ size_t num_zeros = (PAGE_CACHE_SIZE - - (new_length & ~PAGE_CACHE_MASK)); + - (ia->ia_size & ~PAGE_CACHE_MASK)); if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) { - rc = vmtruncate(inode, new_length); + rc = vmtruncate(inode, ia->ia_size); if (rc) goto out_free; - rc = vmtruncate(lower_dentry->d_inode, new_length); + lower_ia->ia_size = ia->ia_size; + lower_ia->ia_valid |= ATTR_SIZE; goto out_free; } if (num_zeros) { @@ -848,7 +857,7 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) goto out_free; } rc = ecryptfs_write(&fake_ecryptfs_file, zeros_virt, - new_length, num_zeros); + ia->ia_size, num_zeros); kfree(zeros_virt); if (rc) { printk(KERN_ERR "Error attempting to zero out " @@ -857,7 +866,7 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) goto out_free; } } - vmtruncate(inode, new_length); + vmtruncate(inode, ia->ia_size); rc = ecryptfs_write_inode_size_to_metadata(inode); if (rc) { printk(KERN_ERR "Problem with " @@ -870,10 +879,12 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) lower_size_before_truncate = upper_size_to_lower_size(crypt_stat, i_size); lower_size_after_truncate = - upper_size_to_lower_size(crypt_stat, new_length); - if (lower_size_after_truncate < lower_size_before_truncate) - vmtruncate(lower_dentry->d_inode, - lower_size_after_truncate); + upper_size_to_lower_size(crypt_stat, ia->ia_size); + if (lower_size_after_truncate < lower_size_before_truncate) { + lower_ia->ia_size = lower_size_after_truncate; + lower_ia->ia_valid |= ATTR_SIZE; + } else + lower_ia->ia_valid &= ~ATTR_SIZE; } out_free: if (ecryptfs_file_to_private(&fake_ecryptfs_file)) @@ -883,6 +894,33 @@ out: return rc; } +/** + * ecryptfs_truncate + * @dentry: The ecryptfs layer dentry + * @new_length: The length to expand the file to + * + * Simple function that handles the truncation of an eCryptfs inode and + * its corresponding lower inode. + * + * Returns zero on success; non-zero otherwise + */ +int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) +{ + struct iattr ia = { .ia_valid = ATTR_SIZE, .ia_size = new_length }; + struct iattr lower_ia = { .ia_valid = 0 }; + int rc; + + rc = truncate_upper(dentry, &ia, &lower_ia); + if (!rc && lower_ia.ia_valid & ATTR_SIZE) { + struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry); + + mutex_lock(&lower_dentry->d_inode->i_mutex); + rc = notify_change(lower_dentry, &lower_ia); + mutex_unlock(&lower_dentry->d_inode->i_mutex); + } + return rc; +} + static int ecryptfs_permission(struct inode *inode, int mask) { @@ -905,6 +943,7 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia) { int rc = 0; struct dentry *lower_dentry; + struct iattr lower_ia; struct inode *inode; struct inode *lower_inode; struct ecryptfs_crypt_stat *crypt_stat; @@ -943,15 +982,11 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia) } } mutex_unlock(&crypt_stat->cs_mutex); + memcpy(&lower_ia, ia, sizeof(lower_ia)); + if (ia->ia_valid & ATTR_FILE) + lower_ia.ia_file = ecryptfs_file_to_lower(ia->ia_file); if (ia->ia_valid & ATTR_SIZE) { - ecryptfs_printk(KERN_DEBUG, - "ia->ia_valid = [0x%x] ATTR_SIZE" " = [0x%x]\n", - ia->ia_valid, ATTR_SIZE); - rc = ecryptfs_truncate(dentry, ia->ia_size); - /* ecryptfs_truncate handles resizing of the lower file */ - ia->ia_valid &= ~ATTR_SIZE; - ecryptfs_printk(KERN_DEBUG, "ia->ia_valid = [%x]\n", - ia->ia_valid); + rc = truncate_upper(dentry, ia, &lower_ia); if (rc < 0) goto out; } @@ -960,11 +995,11 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia) * mode change is for clearing setuid/setgid bits. Allow lower fs * to interpret this in its own way. */ - if (ia->ia_valid & (ATTR_KILL_SUID | ATTR_KILL_SGID)) - ia->ia_valid &= ~ATTR_MODE; + if (lower_ia.ia_valid & (ATTR_KILL_SUID | ATTR_KILL_SGID)) + lower_ia.ia_valid &= ~ATTR_MODE; mutex_lock(&lower_dentry->d_inode->i_mutex); - rc = notify_change(lower_dentry, ia); + rc = notify_change(lower_dentry, &lower_ia); mutex_unlock(&lower_dentry->d_inode->i_mutex); out: fsstack_copy_attr_all(inode, lower_inode); -- cgit v1.2.3 From f8f484d1b6677dd5cd5e7e605db747e8c30bbd47 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 4 Nov 2009 02:48:01 -0600 Subject: eCryptfs: Add getattr function The i_blocks field of an eCryptfs inode cannot be trusted, but generic_fillattr() uses it to instantiate the blocks field of a stat() syscall when a filesystem doesn't implement its own getattr(). Users have noticed that the output of du is incorrect on newly created files. This patch creates ecryptfs_getattr() which calls into the lower filesystem's getattr() so that eCryptfs can use its kstat.blocks value after calling generic_fillattr(). It is important to note that the block count includes the eCryptfs metadata stored in the beginning of the lower file plus any padding used to fill an extent before encryption. https://bugs.launchpad.net/ecryptfs/+bug/390833 Reported-by: Dominic Sacré Signed-off-by: Tyler Hicks --- fs/ecryptfs/inode.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 2b449d79b7fa..5726d7adaf5b 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -1006,6 +1006,21 @@ out: return rc; } +int ecryptfs_getattr(struct vfsmount *mnt, struct dentry *dentry, + struct kstat *stat) +{ + struct kstat lower_stat; + int rc; + + rc = vfs_getattr(ecryptfs_dentry_to_lower_mnt(dentry), + ecryptfs_dentry_to_lower(dentry), &lower_stat); + if (!rc) { + generic_fillattr(dentry->d_inode, stat); + stat->blocks = lower_stat.blocks; + } + return rc; +} + int ecryptfs_setxattr(struct dentry *dentry, const char *name, const void *value, size_t size, int flags) @@ -1135,6 +1150,7 @@ const struct inode_operations ecryptfs_dir_iops = { const struct inode_operations ecryptfs_main_iops = { .permission = ecryptfs_permission, .setattr = ecryptfs_setattr, + .getattr = ecryptfs_getattr, .setxattr = ecryptfs_setxattr, .getxattr = ecryptfs_getxattr, .listxattr = ecryptfs_listxattr, -- cgit v1.2.3 From 38e3eaeedcac75360af8a92e7b66956ec4f334e5 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Tue, 3 Nov 2009 14:56:06 -0600 Subject: eCryptfs: Remove mmap from directory operations Adrian reported that mkfontscale didn't work inside of eCryptfs mounts. Strace revealed the following: open("./", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_CLOEXEC) = 3 fcntl64(3, F_GETFD) = 0x1 (flags FD_CLOEXEC) open("./fonts.scale", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 4 getdents(3, /* 80 entries */, 32768) = 2304 open("./.", O_RDONLY) = 5 fcntl64(5, F_SETFD, FD_CLOEXEC) = 0 fstat64(5, {st_mode=S_IFDIR|0755, st_size=16384, ...}) = 0 mmap2(NULL, 16384, PROT_READ, MAP_PRIVATE, 5, 0) = 0xb7fcf000 close(5) = 0 --- SIGBUS (Bus error) @ 0 (0) --- +++ killed by SIGBUS +++ The mmap2() on a directory was successful, resulting in a SIGBUS signal later. This patch removes mmap() from the list of possible ecryptfs_dir_fops so that mmap() isn't possible on eCryptfs directory files. https://bugs.launchpad.net/ecryptfs/+bug/400443 Reported-by: Adrian C. Signed-off-by: Tyler Hicks --- fs/ecryptfs/file.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 9e944057001b..3efc7fdc3c39 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -299,7 +299,6 @@ static int ecryptfs_ioctl(struct inode *inode, struct file *file, const struct file_operations ecryptfs_dir_fops = { .readdir = ecryptfs_readdir, .ioctl = ecryptfs_ioctl, - .mmap = generic_file_mmap, .open = ecryptfs_open, .flush = ecryptfs_flush, .release = ecryptfs_release, -- cgit v1.2.3 From e27759d7a333d1f25d628c4f7caf845c51be51c2 Mon Sep 17 00:00:00 2001 From: Erez Zadok Date: Thu, 3 Dec 2009 13:35:27 -0500 Subject: ecryptfs: initialize private persistent file before dereferencing pointer Ecryptfs_open dereferences a pointer to the private lower file (the one stored in the ecryptfs inode), without checking if the pointer is NULL. Right afterward, it initializes that pointer if it is NULL. Swap order of statements to first initialize. Bug discovered by Duckjin Kang. Signed-off-by: Duckjin Kang Signed-off-by: Erez Zadok Cc: Dustin Kirkland Cc: Al Viro Cc: Signed-off-by: Tyler Hicks --- fs/ecryptfs/file.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 3efc7fdc3c39..dde7bb48bb5f 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -191,13 +191,6 @@ static int ecryptfs_open(struct inode *inode, struct file *file) | ECRYPTFS_ENCRYPTED); } mutex_unlock(&crypt_stat->cs_mutex); - if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY) - && !(file->f_flags & O_RDONLY)) { - rc = -EPERM; - printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs " - "file must hence be opened RO\n", __func__); - goto out; - } if (!ecryptfs_inode_to_private(inode)->lower_file) { rc = ecryptfs_init_persistent_file(ecryptfs_dentry); if (rc) { @@ -208,6 +201,13 @@ static int ecryptfs_open(struct inode *inode, struct file *file) goto out; } } + if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY) + && !(file->f_flags & O_RDONLY)) { + rc = -EPERM; + printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs " + "file must hence be opened RO\n", __func__); + goto out; + } ecryptfs_set_file_lower( file, ecryptfs_inode_to_private(inode)->lower_file); if (S_ISDIR(ecryptfs_dentry->d_inode->i_mode)) { -- cgit v1.2.3 From 0d132f7364694da8f7cafd49e2fc2721b73e96e4 Mon Sep 17 00:00:00 2001 From: Erez Zadok Date: Sat, 5 Dec 2009 21:17:09 -0500 Subject: ecryptfs: don't ignore return value from lock_rename Signed-off-by: Erez Zadok Cc: Dustin Kirkland Cc: Andrew Morton Cc: Al Viro Signed-off-by: Tyler Hicks --- fs/ecryptfs/inode.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 5726d7adaf5b..764dc777b268 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -614,6 +614,7 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry, struct dentry *lower_new_dentry; struct dentry *lower_old_dir_dentry; struct dentry *lower_new_dir_dentry; + struct dentry *trap = NULL; lower_old_dentry = ecryptfs_dentry_to_lower(old_dentry); lower_new_dentry = ecryptfs_dentry_to_lower(new_dentry); @@ -621,7 +622,17 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry, dget(lower_new_dentry); lower_old_dir_dentry = dget_parent(lower_old_dentry); lower_new_dir_dentry = dget_parent(lower_new_dentry); - lock_rename(lower_old_dir_dentry, lower_new_dir_dentry); + trap = lock_rename(lower_old_dir_dentry, lower_new_dir_dentry); + /* source should not be ancestor of target */ + if (trap == lower_old_dentry) { + rc = -EINVAL; + goto out_lock; + } + /* target should not be ancestor of source */ + if (trap == lower_new_dentry) { + rc = -ENOTEMPTY; + goto out_lock; + } rc = vfs_rename(lower_old_dir_dentry->d_inode, lower_old_dentry, lower_new_dir_dentry->d_inode, lower_new_dentry); if (rc) -- cgit v1.2.3 From c44a66d674688f1e1d0b2f6f56bd9c6a1b061cae Mon Sep 17 00:00:00 2001 From: Erez Zadok Date: Sun, 6 Dec 2009 18:05:30 -0500 Subject: ecryptfs: remove unnecessary d_drop calls in ecryptfs_link Unnecessary because it would unhash perfectly valid dentries, causing them to have to be re-looked up the next time they're needed, which presumably is right after. Signed-off-by: Aseem Rastogi Signed-off-by: Shrikar archak Signed-off-by: Erez Zadok Cc: Saumitra Bhanage Cc: Al Viro Signed-off-by: Tyler Hicks --- fs/ecryptfs/inode.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 764dc777b268..e03415293625 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -463,9 +463,6 @@ out_lock: unlock_dir(lower_dir_dentry); dput(lower_new_dentry); dput(lower_old_dentry); - d_drop(lower_old_dentry); - d_drop(new_dentry); - d_drop(old_dentry); return rc; } -- cgit v1.2.3 From 3469b57329f80db5a41cf42d1c8f7690269f57e7 Mon Sep 17 00:00:00 2001 From: Erez Zadok Date: Sun, 6 Dec 2009 18:51:15 -0500 Subject: ecryptfs: pass matching flags to interpose as defined and used there ecryptfs_interpose checks if one of the flags passed is ECRYPTFS_INTERPOSE_FLAG_D_ADD, defined as 0x00000001 in ecryptfs_kernel.h. But the only user of ecryptfs_interpose to pass a non-zero flag to it, has hard-coded the value as "1". This could spell trouble if any of these values changes in the future. Signed-off-by: Erez Zadok Cc: Dustin Kirkland Cc: Al Viro Signed-off-by: Tyler Hicks --- fs/ecryptfs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index e03415293625..4a430ab4115c 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -282,7 +282,8 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry, goto out; } rc = ecryptfs_interpose(lower_dentry, ecryptfs_dentry, - ecryptfs_dir_inode->i_sb, 1); + ecryptfs_dir_inode->i_sb, + ECRYPTFS_INTERPOSE_FLAG_D_ADD); if (rc) { printk(KERN_ERR "%s: Error interposing; rc = [%d]\n", __func__, rc); -- cgit v1.2.3 From fe0fc013cd8bbd2f4737c1b2694b37dd7fe459cb Mon Sep 17 00:00:00 2001 From: Erez Zadok Date: Mon, 4 Jan 2010 18:17:02 -0500 Subject: ecryptfs: fix interpose/interpolate typos in comments Signed-off-by: Erez Zadok Acked-by: Dustin Kirkland Signed-off-by: Tyler Hicks --- fs/ecryptfs/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 567bc4b9f70a..ea2f92101dfe 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -585,8 +585,8 @@ out: * with as much information as it can before needing * the lower filesystem. * ecryptfs_read_super(): this accesses the lower filesystem and uses - * ecryptfs_interpolate to perform most of the linking - * ecryptfs_interpolate(): links the lower filesystem into ecryptfs + * ecryptfs_interpose to perform most of the linking + * ecryptfs_interpose(): links the lower filesystem into ecryptfs (inode.c) */ static int ecryptfs_get_sb(struct file_system_type *fs_type, int flags, const char *dev_name, void *raw_data, -- cgit v1.2.3 From 4aa25bcb7dac2d583f1557e2be2d0b598581da54 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 16 Jan 2010 17:00:26 +0100 Subject: ecryptfs: Eliminate useless code The variable lower_dentry is initialized twice to the same (side effect-free) expression. Drop one initialization. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // @forall@ idexpression *x; identifier f!=ERR_PTR; @@ x = f(...) ... when != x ( x = f(...,<+...x...+>,...) | * x = f(...) ) // Signed-off-by: Julia Lawall Signed-off-by: Tyler Hicks --- fs/ecryptfs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index dde7bb48bb5f..678172b61be2 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -158,7 +158,7 @@ static int ecryptfs_open(struct inode *inode, struct file *file) struct dentry *ecryptfs_dentry = file->f_path.dentry; /* Private value of ecryptfs_dentry allocated in * ecryptfs_lookup() */ - struct dentry *lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry); + struct dentry *lower_dentry; struct ecryptfs_file_info *file_info; mount_crypt_stat = &ecryptfs_superblock_to_private( -- cgit v1.2.3 From ece550f51ba175c14ec3ec047815927d7386ea1f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 19 Jan 2010 12:34:32 +0300 Subject: ecryptfs: use after free The "full_alg_name" variable is used on a couple error paths, so we shouldn't free it until the end. Signed-off-by: Dan Carpenter Cc: stable@kernel.org Signed-off-by: Tyler Hicks --- fs/ecryptfs/crypto.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index fbb6e5eed697..7cb0a59f4b9d 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -1748,7 +1748,7 @@ ecryptfs_process_key_cipher(struct crypto_blkcipher **key_tfm, char *cipher_name, size_t *key_size) { char dummy_key[ECRYPTFS_MAX_KEY_BYTES]; - char *full_alg_name; + char *full_alg_name = NULL; int rc; *key_tfm = NULL; @@ -1763,7 +1763,6 @@ ecryptfs_process_key_cipher(struct crypto_blkcipher **key_tfm, if (rc) goto out; *key_tfm = crypto_alloc_blkcipher(full_alg_name, 0, CRYPTO_ALG_ASYNC); - kfree(full_alg_name); if (IS_ERR(*key_tfm)) { rc = PTR_ERR(*key_tfm); printk(KERN_ERR "Unable to allocate crypto cipher with name " @@ -1786,6 +1785,7 @@ ecryptfs_process_key_cipher(struct crypto_blkcipher **key_tfm, goto out; } out: + kfree(full_alg_name); return rc; } -- cgit v1.2.3 From 2205cbe8ecaf5f3ab911cef839c94d05ea5b0c76 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 19 Jan 2010 16:55:41 -0700 Subject: ACPI: processor: restrict early _PDC to opt-in platforms Commit 78f1699 (ACPI: processor: call _PDC early) blindly walks the namespace and calls _PDC on every processor object it finds. This change may cause issues on platforms that declare dummy values for SSDTs on non-present processors (disabled in MADT). When we call _PDC and dynamically attempt to execute the AML Load() op on these dummy SSDTs, there's no telling what might happen. Rather than finding every platform that has bogus SSDTs, restrict early _PDC calls to platforms that are known to need early evaluation of _PDC. This is a minimal, temporary fix (given the context of the current release cycle). A real solution of checking the MADT for non-present processors will be written for the next merge window. References: http://bugzilla.kernel.org/show_bug.cgi?id=14710 http://bugzilla.kernel.org/show_bug.cgi?id=14954 Signed-off-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/processor_pdc.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c index 30e4dc0cdf30..f3364371207e 100644 --- a/drivers/acpi/processor_pdc.c +++ b/drivers/acpi/processor_pdc.c @@ -144,6 +144,29 @@ void acpi_processor_set_pdc(acpi_handle handle) } EXPORT_SYMBOL_GPL(acpi_processor_set_pdc); +static int early_pdc_optin; +static int set_early_pdc_optin(const struct dmi_system_id *id) +{ + early_pdc_optin = 1; + return 0; +} + +static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = { + { + set_early_pdc_optin, "HP Envy", { + DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Envy") }, NULL}, + { + set_early_pdc_optin, "HP Pavilion dv6", { + DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv6") }, NULL}, + { + set_early_pdc_optin, "HP Pavilion dv7", { + DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7") }, NULL}, + {}, +}; + static acpi_status early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv) { @@ -159,6 +182,13 @@ void acpi_early_processor_set_pdc(void) */ dmi_check_system(processor_idle_dmi_table); + /* + * Allow systems to opt-in to early _PDC evaluation. + */ + dmi_check_system(early_pdc_optin_table); + if (!early_pdc_optin) + return; + acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, early_init_pdc, NULL, NULL, NULL); -- cgit v1.2.3 From 7f07a605a3929d2d94dcbad8ccb7d280958d21f9 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Tue, 12 Jan 2010 23:37:07 +1100 Subject: ACPI: power_meter: remove double kfree() resource->domain_devices can be double kfree()'d in a couple of places. Fix this by setting num_domain_devices = 0 after the kfree(). Coverity CID: 13356, 13355, 13354 Signed-off-by: Darren Jenkins Acked-by: Darrick J. Wong Signed-off-by: Len Brown --- drivers/acpi/power_meter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index ca75c36f754c..dc4ffadf8122 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -534,6 +534,7 @@ static void remove_domain_devices(struct acpi_power_meter_resource *resource) kfree(resource->domain_devices); kobject_put(resource->holders_dir); + resource->num_domain_devices = 0; } static int read_domain_devices(struct acpi_power_meter_resource *resource) @@ -740,7 +741,6 @@ skip_unsafe_cap: return res; error: - remove_domain_devices(resource); remove_attrs(resource); return res; } -- cgit v1.2.3 From 5d76b6f6c17572e662f5c99c2023adae92100855 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 19 Jan 2010 22:41:14 -0500 Subject: ACPI: enable C2 and Turbo-mode on Nehalem notebooks on A/C Linux has always ignored ACPI BIOS C2 with exit latency > 100 usec, and the ACPI spec is clear that is correct FADT-supplied C2. However, the ACPI spec explicitly states that _CST-supplied C-states have no latency limits. So move the 100usec C2 test out of the code shared by FADT and _CST code-paths, and into the FADT-specific path. This bug has not been visible until Nehalem, which advertises a CPU-C2 worst case exit latency on servers of 205usec. That (incorrect) figure is being used by BIOS writers on mobile Nehalem systems for the AC configuration. Thus, Linux ignores C2 leaving just C1, which is saves less power, and also impacts performance by preventing the use of turbo mode. http://bugzilla.kernel.org/show_bug.cgi?id=15064 Tested-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index d1676b1754d9..8f6da9acc8e4 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -305,6 +305,17 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency; pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency; + /* + * FADT specified C2 latency must be less than or equal to + * 100 microseconds. + */ + if (acpi_gbl_FADT.C2latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C2 latency too large [%d]\n", acpi_gbl_FADT.C2latency)); + /* invalidate C2 */ + pr->power.states[ACPI_STATE_C2].address = 0; + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "lvl2[0x%08x] lvl3[0x%08x]\n", pr->power.states[ACPI_STATE_C2].address, @@ -500,16 +511,6 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx) if (!cx->address) return; - /* - * C2 latency must be less than or equal to 100 - * microseconds. - */ - else if (cx->latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "latency too large [%d]\n", cx->latency)); - return; - } - /* * Otherwise we've met all of our C2 requirements. * Normalize the C2 latency to expidite policy -- cgit v1.2.3 From a6d72c189f6c4292ba1a323e8af24083790529f8 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 19 Jan 2010 23:10:04 -0500 Subject: ACPI: allow C3 > 1000usec Do for C3 what the previous patch did for C2. The C2 patch was in response to a highly visible and multiply reported C-state/turbo failure, while this change has no bug report in-hand. This will enable C3 in Linux on systems where BIOS overstates C3 latency in _CST. It will also enable future systems which may actually have C3 > 1000usec. Linux has always ignored ACPI BIOS C3 with exit latency > 1000 usec, and the ACPI spec is clear that is correct FADT-supplied C3. However, the ACPI spec explicitly states that _CST-supplied C-states have no latency limits. So move the 1000usec C3 test out of the code shared by FADT and _CST code-paths, and into the FADT-specific path. Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 8f6da9acc8e4..2c543b42eb1c 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -316,6 +316,17 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) pr->power.states[ACPI_STATE_C2].address = 0; } + /* + * FADT supplied C3 latency must be less than or equal to + * 1000 microseconds. + */ + if (acpi_gbl_FADT.C3latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C3 latency too large [%d]\n", acpi_gbl_FADT.C3latency)); + /* invalidate C3 */ + pr->power.states[ACPI_STATE_C3].address = 0; + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "lvl2[0x%08x] lvl3[0x%08x]\n", pr->power.states[ACPI_STATE_C2].address, @@ -532,16 +543,6 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr, if (!cx->address) return; - /* - * C3 latency must be less than or equal to 1000 - * microseconds. - */ - else if (cx->latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "latency too large [%d]\n", cx->latency)); - return; - } - /* * PIIX4 Erratum #18: We don't support C3 when Type-F (fast) * DMA transfers are used by any ISA device to avoid livelock. -- cgit v1.2.3 From d22edd293ff3f1e2d252f164fe2cf744620cb660 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 19 Jan 2010 23:29:09 -0500 Subject: ACPI: delete acpi_processor_power_verify_c2() no functional change -- cleanup only. acpi_processor_power_verify_c2() was nearly empty due to a previous patch, so expand its remains into its one caller and delete it. Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 2c543b42eb1c..7c0441f63b39 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -516,23 +516,6 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) return status; } -static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx) -{ - - if (!cx->address) - return; - - /* - * Otherwise we've met all of our C2 requirements. - * Normalize the C2 latency to expidite policy - */ - cx->valid = 1; - - cx->latency_ticks = cx->latency; - - return; -} - static void acpi_processor_power_verify_c3(struct acpi_processor *pr, struct acpi_processor_cx *cx) { @@ -631,7 +614,10 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) break; case ACPI_STATE_C2: - acpi_processor_power_verify_c2(cx); + if (!cx->address) + break; + cx->valid = 1; + cx->latency_ticks = cx->latency; /* Normalize latency */ break; case ACPI_STATE_C3: -- cgit v1.2.3 From 47103277f8861dcb48ab845533db331ddb9427ca Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Tue, 19 Jan 2010 19:23:23 +0200 Subject: perf kmem: Increase "Hit" column length It's fairly easy to overflow the "Hit" column with just few seconds of tracing so increase the column length to avoid broken formatting. Signed-off-by: Pekka Enberg Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Li Zefan Cc: Xiao Guangrong LKML-Reference: <1263921803-10214-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar --- tools/perf/builtin-kmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index 7ceb7416c316..33bb9dfb8e68 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -375,7 +375,7 @@ static void __print_result(struct rb_root *root, struct perf_session *session, printf("%.102s\n", graph_dotted_line); printf(" %-34s |", is_caller ? "Callsite": "Alloc Ptr"); - printf(" Total_alloc/Per | Total_req/Per | Hit | Ping-pong | Frag\n"); + printf(" Total_alloc/Per | Total_req/Per | Hit | Ping-pong | Frag\n"); printf("%.102s\n", graph_dotted_line); next = rb_first(root); @@ -401,7 +401,7 @@ static void __print_result(struct rb_root *root, struct perf_session *session, snprintf(buf, sizeof(buf), "%#Lx", addr); printf(" %-34s |", buf); - printf(" %9llu/%-5lu | %9llu/%-5lu | %6lu | %8lu | %6.3f%%\n", + printf(" %9llu/%-5lu | %9llu/%-5lu | %8lu | %8lu | %6.3f%%\n", (unsigned long long)data->bytes_alloc, (unsigned long)data->bytes_alloc / data->hit, (unsigned long long)data->bytes_req, -- cgit v1.2.3 From b00eca8cd66029128615e8be9a19e284a950c0f2 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Tue, 19 Jan 2010 19:26:11 +0200 Subject: perf kmem: Print usage help for unknown commands This patch fixes "perf kmem" to print usage help instead of doing nothing. Signed-off-by: Pekka Enberg Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Li Zefan Cc: Xiao Guangrong LKML-Reference: <1263921971-10782-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar --- tools/perf/builtin-kmem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index 33bb9dfb8e68..93c67bf53d2c 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -784,7 +784,8 @@ int cmd_kmem(int argc, const char **argv, const char *prefix __used) setup_sorting(&alloc_sort, default_sort_order); return __cmd_kmem(); - } + } else + usage_with_options(kmem_usage, kmem_options); return 0; } -- cgit v1.2.3 From 534ead709235b967b659947c55d9130873a432c4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 14 Jan 2010 16:18:09 +0900 Subject: libata: retry FS IOs even if it has failed with AC_ERR_INVALID libata currently doesn't retry if a command fails with AC_ERR_INVALID assuming that retrying won't get it any further even if retried. However, a failure may be classified as invalid through hardware glitch (incorrect reading of the error register or firmware bug) and there isn't whole lot to gain by not retrying as actually invalid commands will be failed immediately. Also, commands serving FS IOs are extremely unlikely to be invalid. Retry FS IOs even if it's marked invalid. Transient and incorrect invalid failure was seen while debugging firmware related issue on Samsung n130 on bko#14314. http://bugzilla.kernel.org/show_bug.cgi?id=14314 Signed-off-by: Tejun Heo Reported-by: Johannes Stezenbach Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 0ea97c942ced..9f6cfac0f2cc 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2028,8 +2028,9 @@ static void ata_eh_link_autopsy(struct ata_link *link) qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER); /* determine whether the command is worth retrying */ - if (!(qc->err_mask & AC_ERR_INVALID) && - ((qc->flags & ATA_QCFLAG_IO) || qc->err_mask != AC_ERR_DEV)) + if (qc->flags & ATA_QCFLAG_IO || + (!(qc->err_mask & AC_ERR_INVALID) && + qc->err_mask != AC_ERR_DEV)) qc->flags |= ATA_QCFLAG_RETRY; /* accumulate error info */ -- cgit v1.2.3 From f776c5ec4690b21b3668ad5956774a22c86f541a Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 18 Jan 2010 14:36:12 +0100 Subject: driver-core: fix devtmpfs crash on s390 On Mon, Jan 18, 2010 at 05:26:20PM +0530, Sachin Sant wrote: > Hello Heiko, > > Today while trying to boot next-20100118 i came across > the following Oops : > > Brought up 4 CPUs > Unable to handle kernel pointer dereference at virtual kernel address 0000000000 > 543000 > Oops: 0004 #1 SMP > Modules linked in: > CPU: 0 Not tainted 2.6.33-rc4-autotest-next-20100118-5-default #1 > Process swapper (pid: 1, task: 00000000fd792038, ksp: 00000000fd797a30) > Krnl PSW : 0704200180000000 00000000001eb0b8 (shmem_parse_options+0xc0/0x328) > R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 > Krnl GPRS: 000000000054388a 000000000000003d 0000000000543836 000000000000003d > 0000000000000000 0000000000483f28 0000000000536112 00000000fd797d00 > 00000000fd4ba100 0000000000000100 0000000000483978 0000000000543832 > 0000000000000000 0000000000465958 00000000001eb0b0 00000000fd797c58 > Krnl Code: 00000000001eb0aa: c0e5000994f1 brasl %r14,31da8c > 00000000001eb0b0: b9020022 ltgr %r2,%r2 > 00000000001eb0b4: a784010b brc 8,1eb2ca > >00000000001eb0b8: 92002000 mvi 0(%r2),0 > 00000000001eb0bc: a7080000 lhi %r0,0 > 00000000001eb0c0: 41902001 la %r9,1(%r2) > 00000000001eb0c4: b9040016 lgr %r1,%r6 > 00000000001eb0c8: b904002b lgr %r2,%r11 > Call Trace: > (<00000000fd797c50> 0xfd797c50) > <00000000001eb5da> shmem_fill_super+0x13a/0x25c > <0000000000228cfa> get_sb_single+0xbe/0xdc > <000000000034ffc0> dev_get_sb+0x2c/0x38 > <000000000066c602> devtmpfs_init+0x46/0xc0 > <000000000066c53e> driver_init+0x22/0x60 > <000000000064d40a> kernel_init+0x24e/0x3d0 > <000000000010a7ea> kernel_thread_starter+0x6/0xc > <000000000010a7e4> kernel_thread_starter+0x0/0xc > > I never tried to boot a kernel with DEVTMPFS enabled on a s390 box. > So am wondering if this is supported or not ? If you think this > is supported i will send a mail to community on this. There is nothing arch specific to devtmpfs. This part crashes because the kernel tries to modify the data read-only section which is write protected on s390. Signed-off-by: Heiko Carstens Acked-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/devtmpfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c index 090dd4851301..42ae452b36b0 100644 --- a/drivers/base/devtmpfs.c +++ b/drivers/base/devtmpfs.c @@ -354,6 +354,7 @@ int __init devtmpfs_init(void) { int err; struct vfsmount *mnt; + char options[] = "mode=0755"; err = register_filesystem(&dev_fs_type); if (err) { @@ -362,7 +363,7 @@ int __init devtmpfs_init(void) return err; } - mnt = kern_mount_data(&dev_fs_type, "mode=0755"); + mnt = kern_mount_data(&dev_fs_type, options); if (IS_ERR(mnt)) { err = PTR_ERR(mnt); printk(KERN_ERR "devtmpfs: unable to create devtmpfs %i\n", err); -- cgit v1.2.3 From bd796671f093d5b1841d383674d5650f5ec6c9c6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 19 Jan 2010 13:08:16 -0800 Subject: Revert "sysdev: fix prototype for memory_sysdev_class show/store functions" This reverts commit 8ff410daa009c4b44be445ded5b0cec00abc0426 It should not have been sent to Linus's tree yet, as it depends on changes that are queued up in my driver-core for the .34 kernel merge. Cc: Wu Fengguang Cc: Andi Kleen Cc: "Zheng, Shaohui" Cc: Andrew Morton Cc: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- drivers/base/memory.c | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-) diff --git a/drivers/base/memory.c b/drivers/base/memory.c index ae6b6c43cff9..bd025059711f 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -309,19 +309,17 @@ static SYSDEV_ATTR(removable, 0444, show_mem_removable, NULL); * Block size attribute stuff */ static ssize_t -print_block_size(struct sysdev_class *class, - struct sysdev_class_attribute *class_attr, - char *buf) +print_block_size(struct class *class, char *buf) { return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE); } -static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL); +static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL); static int block_size_init(void) { return sysfs_create_file(&memory_sysdev_class.kset.kobj, - &attr_block_size_bytes.attr); + &class_attr_block_size_bytes.attr); } /* @@ -332,9 +330,7 @@ static int block_size_init(void) */ #ifdef CONFIG_ARCH_MEMORY_PROBE static ssize_t -memory_probe_store(struct sysdev_class *class, - struct sysdev_class_attribute *class_attr, - const char *buf, size_t count) +memory_probe_store(struct class *class, const char *buf, size_t count) { u64 phys_addr; int nid; @@ -350,12 +346,12 @@ memory_probe_store(struct sysdev_class *class, return count; } -static SYSDEV_CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store); +static CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store); static int memory_probe_init(void) { return sysfs_create_file(&memory_sysdev_class.kset.kobj, - &attr_probe.attr); + &class_attr_probe.attr); } #else static inline int memory_probe_init(void) @@ -371,9 +367,7 @@ static inline int memory_probe_init(void) /* Soft offline a page */ static ssize_t -store_soft_offline_page(struct sysdev_class *class, - struct sysdev_class_attribute *class_attr, - const char *buf, size_t count) +store_soft_offline_page(struct class *class, const char *buf, size_t count) { int ret; u64 pfn; @@ -390,9 +384,7 @@ store_soft_offline_page(struct sysdev_class *class, /* Forcibly offline a page, including killing processes. */ static ssize_t -store_hard_offline_page(struct sysdev_class *class, - struct sysdev_class_attribute *class_attr, - const char *buf, size_t count) +store_hard_offline_page(struct class *class, const char *buf, size_t count) { int ret; u64 pfn; @@ -405,18 +397,18 @@ store_hard_offline_page(struct sysdev_class *class, return ret ? ret : count; } -static SYSDEV_CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page); -static SYSDEV_CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page); +static CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page); +static CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page); static __init int memory_fail_init(void) { int err; err = sysfs_create_file(&memory_sysdev_class.kset.kobj, - &attr_soft_offline_page.attr); + &class_attr_soft_offline_page.attr); if (!err) err = sysfs_create_file(&memory_sysdev_class.kset.kobj, - &attr_hard_offline_page.attr); + &class_attr_hard_offline_page.attr); return err; } #else -- cgit v1.2.3 From 3f00171125384b46e5088b7d7a5d0b3e6972f1ee Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 10 Jan 2010 23:29:16 +0900 Subject: compat_ioctl: Supress "unknown cmd" message on serial /dev/console After the commit fb07a5f8 ("compat_ioctl: remove all VT ioctl handling"), I got this error message on 64-bit mips kernel with 32-bit busybox userland: ioctl32(init:1): Unknown cmd fd(0) cmd(00005600){t:'V';sz:0} arg(7fd76480) on /dev/console The cmd 5600 is VT_OPENQRY. The busybox's init issues this ioctl to know vt-console or serial-console. If the console was serial console, VT ioctls are not handled by the serial driver. And by quick search, I found some programs using VT_GETMODE to check vt-console is available or not. Signed-off-by: Atsushi Nemoto Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- fs/compat_ioctl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 332dd00f0894..c5c45de1a2ee 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -1005,6 +1005,9 @@ COMPATIBLE_IOCTL(SCSI_IOCTL_SEND_COMMAND) COMPATIBLE_IOCTL(SCSI_IOCTL_PROBE_HOST) COMPATIBLE_IOCTL(SCSI_IOCTL_GET_PCI) #endif +/* Big V (don't complain on serial console) */ +IGNORE_IOCTL(VT_OPENQRY) +IGNORE_IOCTL(VT_GETMODE) /* Little p (/dev/rtc, /dev/envctrl, etc.) */ COMPATIBLE_IOCTL(RTC_AIE_ON) COMPATIBLE_IOCTL(RTC_AIE_OFF) -- cgit v1.2.3 From eeec32a731631a9bad9abb21c626b9f2840bee0d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Jan 2010 16:26:50 +0000 Subject: nozomi: quick fix for the close/close bug Nozomi goes wrong if you get the sequence open open close [stuff] close which turns out to occur on some ppp type setups. This is a quick patch up for the problem. It's not really fixing Nozomi which completely fails to implement tty open/close semantics and all the other needed stuff. Doing it right is a rather more invasive patch set and not one that will backport. Signed-off-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/char/nozomi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 7d73cd430340..2ad7d37afbd0 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -1651,10 +1651,10 @@ static void ntty_close(struct tty_struct *tty, struct file *file) dc->open_ttys--; port->count--; - tty_port_tty_set(port, NULL); if (port->count == 0) { DBG1("close: %d", nport->token_dl); + tty_port_tty_set(port, NULL); spin_lock_irqsave(&dc->spin_mutex, flags); dc->last_ier &= ~(nport->token_dl); writew(dc->last_ier, dc->reg_ier); -- cgit v1.2.3 From 6d34855d9aa281f72c533ecb827405139d1b0fe9 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 9 Dec 2009 12:31:37 -0800 Subject: serial: 8250_pnp: use wildcard for serial Wacom tablets Wacom claims that the WACF namespace will always be devoted to serial Wacom tablets. Remove the existing entries and add a wildcard to avoid having to update the kernel every time they add a new device. Signed-off-by: Ping Cheng Signed-off-by: Matthew Garrett Tested-by: Ping Cheng Cc: Alan Cox Signed-off-by: Andrew Morton Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/serial/8250_pnp.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index b5496a19d967..24485cc62ff8 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -328,15 +328,7 @@ static const struct pnp_device_id pnp_dev_table[] = { /* U.S. Robotics 56K Voice INT PnP*/ { "USR9190", 0 }, /* Wacom tablets */ - { "WACF004", 0 }, - { "WACF005", 0 }, - { "WACF006", 0 }, - { "WACF007", 0 }, - { "WACF008", 0 }, - { "WACF009", 0 }, - { "WACF00A", 0 }, - { "WACF00B", 0 }, - { "WACF00C", 0 }, + { "WACFXXX", 0 }, /* Compaq touchscreen */ { "FPI2002", 0 }, /* Fujitsu Stylistic touchscreens */ -- cgit v1.2.3 From 4547be7809a3b775ce750ec7f8b5748954741523 Mon Sep 17 00:00:00 2001 From: Stanislav Brabec Date: Wed, 2 Dec 2009 16:20:56 +0100 Subject: serial-core: resume serial hardware with no_console_suspend Perform a tricky suspend/resume even with no_console_suspend. With no_console_suspend, kernel skips serial port suspend/resume and the serial hardware may remain in undefined state after resume. It actually happens on devices that don't have BIOS that handle serial initialization. It makes impossible to use serial console after resume. Devices affected by this problem include: Sharp Zaurus devices Several PXA based ARM embedded boards The patch does: - Save the hardware state - Perform buffer flush in time of its suspend call - Tell the driver that port is suspended - But still accept new data - And keep console hardware in state that allows to send them It allows to capture late console messages without breaking console after resume. This is just a resend of a patch discussed in these threads, as the patch was not yet applied. "Possible suspend/resume regression in .32-rc?" (Nov 1-5, 2009, ARM list, later LKML) "serial-core: resume serial hardware with no_console_suspend" (Sep 15-Oct 18, 2009, LKML & ARM lists) Signed-off-by: Stanislav Brabec Tested-by: Haojian Zhuang Tested-by: Daniel Mack Signed-off-by: Greg Kroah-Hartman --- drivers/serial/serial_core.c | 88 +++++++++++++++++--------------------------- 1 file changed, 33 insertions(+), 55 deletions(-) diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 047530b285bb..fa4f170f2e86 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -2006,12 +2006,6 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - if (!console_suspend_enabled && uart_console(uport)) { - /* we're going to avoid suspending serial console */ - mutex_unlock(&port->mutex); - return 0; - } - tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (device_may_wakeup(tty_dev)) { enable_irq_wake(uport->irq); @@ -2019,20 +2013,23 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) mutex_unlock(&port->mutex); return 0; } - uport->suspended = 1; + if (console_suspend_enabled || !uart_console(uport)) + uport->suspended = 1; if (port->flags & ASYNC_INITIALIZED) { const struct uart_ops *ops = uport->ops; int tries; - set_bit(ASYNCB_SUSPENDED, &port->flags); - clear_bit(ASYNCB_INITIALIZED, &port->flags); + if (console_suspend_enabled || !uart_console(uport)) { + set_bit(ASYNCB_SUSPENDED, &port->flags); + clear_bit(ASYNCB_INITIALIZED, &port->flags); - spin_lock_irq(&uport->lock); - ops->stop_tx(uport); - ops->set_mctrl(uport, 0); - ops->stop_rx(uport); - spin_unlock_irq(&uport->lock); + spin_lock_irq(&uport->lock); + ops->stop_tx(uport); + ops->set_mctrl(uport, 0); + ops->stop_rx(uport); + spin_unlock_irq(&uport->lock); + } /* * Wait for the transmitter to empty. @@ -2047,16 +2044,18 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) drv->dev_name, drv->tty_driver->name_base + uport->line); - ops->shutdown(uport); + if (console_suspend_enabled || !uart_console(uport)) + ops->shutdown(uport); } /* * Disable the console device before suspending. */ - if (uart_console(uport)) + if (console_suspend_enabled && uart_console(uport)) console_stop(uport->cons); - uart_change_pm(state, 3); + if (console_suspend_enabled || !uart_console(uport)) + uart_change_pm(state, 3); mutex_unlock(&port->mutex); @@ -2073,29 +2072,6 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - if (!console_suspend_enabled && uart_console(uport)) { - /* no need to resume serial console, it wasn't suspended */ - /* - * First try to use the console cflag setting. - */ - memset(&termios, 0, sizeof(struct ktermios)); - termios.c_cflag = uport->cons->cflag; - /* - * If that's unset, use the tty termios setting. - */ - if (termios.c_cflag == 0) - termios = *state->port.tty->termios; - else { - termios.c_ispeed = termios.c_ospeed = - tty_termios_input_baud_rate(&termios); - termios.c_ispeed = termios.c_ospeed = - tty_termios_baud_rate(&termios); - } - uport->ops->set_termios(uport, &termios, NULL); - mutex_unlock(&port->mutex); - return 0; - } - tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (!uport->suspended && device_may_wakeup(tty_dev)) { disable_irq_wake(uport->irq); @@ -2121,21 +2097,23 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) spin_lock_irq(&uport->lock); ops->set_mctrl(uport, 0); spin_unlock_irq(&uport->lock); - ret = ops->startup(uport); - if (ret == 0) { - uart_change_speed(state, NULL); - spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, uport->mctrl); - ops->start_tx(uport); - spin_unlock_irq(&uport->lock); - set_bit(ASYNCB_INITIALIZED, &port->flags); - } else { - /* - * Failed to resume - maybe hardware went away? - * Clear the "initialized" flag so we won't try - * to call the low level drivers shutdown method. - */ - uart_shutdown(state); + if (console_suspend_enabled || !uart_console(uport)) { + ret = ops->startup(uport); + if (ret == 0) { + uart_change_speed(state, NULL); + spin_lock_irq(&uport->lock); + ops->set_mctrl(uport, uport->mctrl); + ops->start_tx(uport); + spin_unlock_irq(&uport->lock); + set_bit(ASYNCB_INITIALIZED, &port->flags); + } else { + /* + * Failed to resume - maybe hardware went away? + * Clear the "initialized" flag so we won't try + * to call the low level drivers shutdown method. + */ + uart_shutdown(state); + } } clear_bit(ASYNCB_SUSPENDED, &port->flags); -- cgit v1.2.3 From 16ae2a877bf4179737921235e85ceffd7b79354f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Jan 2010 16:26:21 +0000 Subject: serial: Fix crash if the minimum rate of the device is > 9600 baud In that situation if the old rate is invalid and the new rate is invalid and the chip cannot do 9600 baud we report zero, which makes all the drivers explode. Instead force the rate based on min/max Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/serial/serial_core.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index fa4f170f2e86..7f2830709512 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -385,13 +385,20 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, } /* - * As a last resort, if the quotient is zero, - * default to 9600 bps + * As a last resort, if the range cannot be met then clip to + * the nearest chip supported rate. */ - if (!hung_up) - tty_termios_encode_baud_rate(termios, 9600, 9600); + if (!hung_up) { + if (baud <= min) + tty_termios_encode_baud_rate(termios, + min + 1, min + 1); + else + tty_termios_encode_baud_rate(termios, + max - 1, max - 1); + } } - + /* Should never happen */ + WARN_ON(1); return 0; } -- cgit v1.2.3 From 2e2eb509aa7a333fe9931cf306fc7dbc3473f25b Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 9 Dec 2009 12:31:36 -0800 Subject: serial: imx: bit &/| confusion Since UCR1_UARTEN is defined 1, the port was always treated as enabled. Signed-off-by: Roel Kluin Cc: Alan Cox Acked-by: Oskar Schirmer Cc: Sascha Hauer Cc: Fabian Godehardt Cc: Daniel Glöckner Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 18130f11238e..60d665a17a88 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1088,7 +1088,7 @@ imx_console_get_options(struct imx_port *sport, int *baud, int *parity, int *bits) { - if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) { + if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) { /* ok, the port was enabled */ unsigned int ucr2, ubir,ubmr, uartclk; unsigned int baud_raw; -- cgit v1.2.3 From 18c576f950167ff3ec1e56dcbbec7b87288b3237 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 9 Dec 2009 12:31:31 -0800 Subject: serial: serial_cs: oxsemi quirk breaks resume Quirk is applied on all cards with given manfid (is it that correct?). Unfortunately, that quirk breaks resume on zaurus with billionton bluetooth card inserted: c950ctrl is 0 and outb() faults. I believe it is simply not a multiport card. (info->multi == 1). ... ... confirmed by printks. Signed-off-by: Pavel Machek Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/serial_cs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 0ee7239c5d69..df854401af2d 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -146,7 +146,8 @@ static void quirk_wakeup_oxsemi(struct pcmcia_device *link) { struct serial_info *info = link->priv; - outb(12, info->c950ctrl + 1); + if (info->c950ctrl) + outb(12, info->c950ctrl + 1); } /* request_region? oxsemi branch does no request_region too... */ -- cgit v1.2.3 From 703625118069f9f8960d356676662d3db5a9d116 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Dec 2009 07:07:19 -0800 Subject: tty: fix race in tty_fasync We need to keep the lock held over the call to __f_setown() to prevent a PID race. Thanks to Al Viro for pointing out the problem, and to Travis for making us look here in the first place. Cc: Eric W. Biederman Cc: Al Viro Cc: Alan Cox Cc: Linus Torvalds Cc: Tavis Ormandy Cc: Jeff Dike Cc: Julien Tinnes Cc: Matt Mackall Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index f15df40bc318..c6f3b48be9dd 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1951,8 +1951,8 @@ static int tty_fasync(int fd, struct file *filp, int on) pid = task_pid(current); type = PIDTYPE_PID; } - spin_unlock_irqrestore(&tty->ctrl_lock, flags); retval = __f_setown(filp, pid, type, 0); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); if (retval) goto out; } else { -- cgit v1.2.3 From 20633bf0141c5e93e3396770d5eb7d200ee4068a Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Wed, 23 Dec 2009 10:27:22 -0200 Subject: Staging: asus_oled: fix oops in 2.6.32.2 After updating to 2.6.32 kernel, I started experiencing Oopses caused by the asus_oled module. After quick investigation, I wrapped this simple patch which fixes an Oops in by asus_oled module on 2.6.32.2 kernel, caused by incorrect usage of strict_strtoul function call within set_enabled and set_disabled functions. This can be triggered by simple running the userspace client for asus_old (e.g., 'asusoled -e' or 'asusoled -d'). Signed-off-by: Eugeni Dodonov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/asus_oled/asus_oled.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c index f4c26572c7df..43c57b7688ab 100644 --- a/drivers/staging/asus_oled/asus_oled.c +++ b/drivers/staging/asus_oled/asus_oled.c @@ -194,9 +194,11 @@ static ssize_t set_enabled(struct device *dev, struct device_attribute *attr, { struct usb_interface *intf = to_usb_interface(dev); struct asus_oled_dev *odev = usb_get_intfdata(intf); - int temp = strict_strtoul(buf, 10, NULL); + unsigned long value; + if (strict_strtoul(buf, 10, &value)) + return -EINVAL; - enable_oled(odev, temp); + enable_oled(odev, value); return count; } @@ -207,10 +209,12 @@ static ssize_t class_set_enabled(struct device *device, { struct asus_oled_dev *odev = (struct asus_oled_dev *) dev_get_drvdata(device); + unsigned long value; - int temp = strict_strtoul(buf, 10, NULL); + if (strict_strtoul(buf, 10, &value)) + return -EINVAL; - enable_oled(odev, temp); + enable_oled(odev, value); return count; } -- cgit v1.2.3 From d31a2ff03f31cbecb92bdc5b1ab9d62fb70971d7 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 6 Jan 2010 14:01:26 +0000 Subject: Staging: et131x: Fix 2.6.33rc1 regression in et131x et131x: Fix 12bit wrapping From: Alan Cox The 12bit wrap logic conversion is wrong and this shows up for some memory sizes and layouts of card. Patch it up for now, once the kernel view of status is cleaned up it'll become two variables and a lot saner. Signed-off-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/et131x/et1310_address_map.h | 18 +++++++++++++----- drivers/staging/et131x/et1310_rx.c | 6 +++--- 2 files changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h index 6da843cc343c..e715e4dcb523 100644 --- a/drivers/staging/et131x/et1310_address_map.h +++ b/drivers/staging/et131x/et1310_address_map.h @@ -203,11 +203,14 @@ typedef struct _GLOBAL_t { /* Location: */ * 9-0: pr ndes */ -#define ET_DMA10_MASK 0x3FF /* 10 bit mask for DMA10W types */ -#define ET_DMA10_WRAP 0x400 -#define ET_DMA4_MASK 0x00F /* 4 bit mask for DMA4W types */ -#define ET_DMA4_WRAP 0x010 - +#define ET_DMA12_MASK 0x0FFF /* 12 bit mask for DMA12W types */ +#define ET_DMA12_WRAP 0x1000 +#define ET_DMA10_MASK 0x03FF /* 10 bit mask for DMA10W types */ +#define ET_DMA10_WRAP 0x0400 +#define ET_DMA4_MASK 0x000F /* 4 bit mask for DMA4W types */ +#define ET_DMA4_WRAP 0x0010 + +#define INDEX12(x) ((x) & ET_DMA12_MASK) #define INDEX10(x) ((x) & ET_DMA10_MASK) #define INDEX4(x) ((x) & ET_DMA4_MASK) @@ -216,6 +219,11 @@ extern inline void add_10bit(u32 *v, int n) *v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP); } +extern inline void add_12bit(u32 *v, int n) +{ + *v = INDEX12(*v + n) | (*v & ET_DMA12_WRAP); +} + /* * 10bit DMA with wrap * txdma tx queue write address reg in txdma address map at 0x1010 diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c index 3ddc9b12b8db..81c1a7478ad6 100644 --- a/drivers/staging/et131x/et1310_rx.c +++ b/drivers/staging/et131x/et1310_rx.c @@ -831,10 +831,10 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *etdev) /* Indicate that we have used this PSR entry. */ /* FIXME wrap 12 */ - rx_local->local_psr_full = (rx_local->local_psr_full + 1) & 0xFFF; - if (rx_local->local_psr_full > rx_local->PsrNumEntries - 1) { + add_12bit(&rx_local->local_psr_full, 1); + if ((rx_local->local_psr_full & 0xFFF) > rx_local->PsrNumEntries - 1) { /* Clear psr full and toggle the wrap bit */ - rx_local->local_psr_full &= 0xFFF; + rx_local->local_psr_full &= ~0xFFF; rx_local->local_psr_full ^= 0x1000; } -- cgit v1.2.3 From 7692fd4d441afac728cb83fdd33349d5ba07406c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 8 Jan 2010 09:06:40 -0800 Subject: Staging: hv: fix smp problems in the hyperv core code This fixes a number of SMP problems that were in the hyperv core code. Patch originally written by K. Y. Srinivasan but forward ported to the latest in-kernel code and tweaked slightly by me. Novell, Inc. hereby disclaims all copyright in any derivative work copyright associated with this patch. Signed-off-by: K. Y. Srinivasan Cc: Hank Janssen Cc: Haiyang Zhang . Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/Hv.c | 50 +++++++++++++++++++++++----------------------- drivers/staging/hv/Hv.h | 6 +++--- drivers/staging/hv/Vmbus.c | 12 ++++++----- 3 files changed, 35 insertions(+), 33 deletions(-) diff --git a/drivers/staging/hv/Hv.c b/drivers/staging/hv/Hv.c index c5b6613f2f2f..c2809f2a2ce0 100644 --- a/drivers/staging/hv/Hv.c +++ b/drivers/staging/hv/Hv.c @@ -386,7 +386,7 @@ u16 HvSignalEvent(void) * retrieve the initialized message and event pages. Otherwise, we create and * initialize the message and event pages. */ -int HvSynicInit(u32 irqVector) +void HvSynicInit(void *irqarg) { u64 version; union hv_synic_simp simp; @@ -394,13 +394,14 @@ int HvSynicInit(u32 irqVector) union hv_synic_sint sharedSint; union hv_synic_scontrol sctrl; u64 guestID; - int ret = 0; + u32 irqVector = *((u32 *)(irqarg)); + int cpu = smp_processor_id(); DPRINT_ENTER(VMBUS); if (!gHvContext.HypercallPage) { DPRINT_EXIT(VMBUS); - return ret; + return; } /* Check the version */ @@ -425,27 +426,27 @@ int HvSynicInit(u32 irqVector) */ rdmsrl(HV_X64_MSR_GUEST_OS_ID, guestID); if (guestID == HV_LINUX_GUEST_ID) { - gHvContext.synICMessagePage[0] = + gHvContext.synICMessagePage[cpu] = phys_to_virt(simp.BaseSimpGpa << PAGE_SHIFT); - gHvContext.synICEventPage[0] = + gHvContext.synICEventPage[cpu] = phys_to_virt(siefp.BaseSiefpGpa << PAGE_SHIFT); } else { DPRINT_ERR(VMBUS, "unknown guest id!!"); goto Cleanup; } DPRINT_DBG(VMBUS, "MAPPED: Simp: %p, Sifep: %p", - gHvContext.synICMessagePage[0], - gHvContext.synICEventPage[0]); + gHvContext.synICMessagePage[cpu], + gHvContext.synICEventPage[cpu]); } else { - gHvContext.synICMessagePage[0] = osd_PageAlloc(1); - if (gHvContext.synICMessagePage[0] == NULL) { + gHvContext.synICMessagePage[cpu] = (void *)get_zeroed_page(GFP_ATOMIC); + if (gHvContext.synICMessagePage[cpu] == NULL) { DPRINT_ERR(VMBUS, "unable to allocate SYNIC message page!!"); goto Cleanup; } - gHvContext.synICEventPage[0] = osd_PageAlloc(1); - if (gHvContext.synICEventPage[0] == NULL) { + gHvContext.synICEventPage[cpu] = (void *)get_zeroed_page(GFP_ATOMIC); + if (gHvContext.synICEventPage[cpu] == NULL) { DPRINT_ERR(VMBUS, "unable to allocate SYNIC event page!!"); goto Cleanup; @@ -454,7 +455,7 @@ int HvSynicInit(u32 irqVector) /* Setup the Synic's message page */ rdmsrl(HV_X64_MSR_SIMP, simp.AsUINT64); simp.SimpEnabled = 1; - simp.BaseSimpGpa = virt_to_phys(gHvContext.synICMessagePage[0]) + simp.BaseSimpGpa = virt_to_phys(gHvContext.synICMessagePage[cpu]) >> PAGE_SHIFT; DPRINT_DBG(VMBUS, "HV_X64_MSR_SIMP msr set to: %llx", @@ -465,7 +466,7 @@ int HvSynicInit(u32 irqVector) /* Setup the Synic's event page */ rdmsrl(HV_X64_MSR_SIEFP, siefp.AsUINT64); siefp.SiefpEnabled = 1; - siefp.BaseSiefpGpa = virt_to_phys(gHvContext.synICEventPage[0]) + siefp.BaseSiefpGpa = virt_to_phys(gHvContext.synICEventPage[cpu]) >> PAGE_SHIFT; DPRINT_DBG(VMBUS, "HV_X64_MSR_SIEFP msr set to: %llx", @@ -501,32 +502,30 @@ int HvSynicInit(u32 irqVector) DPRINT_EXIT(VMBUS); - return ret; + return; Cleanup: - ret = -1; - if (gHvContext.GuestId == HV_LINUX_GUEST_ID) { - if (gHvContext.synICEventPage[0]) - osd_PageFree(gHvContext.synICEventPage[0], 1); + if (gHvContext.synICEventPage[cpu]) + osd_PageFree(gHvContext.synICEventPage[cpu], 1); - if (gHvContext.synICMessagePage[0]) - osd_PageFree(gHvContext.synICMessagePage[0], 1); + if (gHvContext.synICMessagePage[cpu]) + osd_PageFree(gHvContext.synICMessagePage[cpu], 1); } DPRINT_EXIT(VMBUS); - - return ret; + return; } /** * HvSynicCleanup - Cleanup routine for HvSynicInit(). */ -void HvSynicCleanup(void) +void HvSynicCleanup(void *arg) { union hv_synic_sint sharedSint; union hv_synic_simp simp; union hv_synic_siefp siefp; + int cpu = smp_processor_id(); DPRINT_ENTER(VMBUS); @@ -539,6 +538,7 @@ void HvSynicCleanup(void) sharedSint.Masked = 1; + /* Need to correctly cleanup in the case of SMP!!! */ /* Disable the interrupt */ wrmsrl(HV_X64_MSR_SINT0 + VMBUS_MESSAGE_SINT, sharedSint.AsUINT64); @@ -560,8 +560,8 @@ void HvSynicCleanup(void) wrmsrl(HV_X64_MSR_SIEFP, siefp.AsUINT64); - osd_PageFree(gHvContext.synICMessagePage[0], 1); - osd_PageFree(gHvContext.synICEventPage[0], 1); + osd_PageFree(gHvContext.synICMessagePage[cpu], 1); + osd_PageFree(gHvContext.synICEventPage[cpu], 1); } DPRINT_EXIT(VMBUS); diff --git a/drivers/staging/hv/Hv.h b/drivers/staging/hv/Hv.h index 5379e4bfc56e..fce4b5cdac30 100644 --- a/drivers/staging/hv/Hv.h +++ b/drivers/staging/hv/Hv.h @@ -93,7 +93,7 @@ static const struct hv_guid VMBUS_SERVICE_ID = { }, }; -#define MAX_NUM_CPUS 1 +#define MAX_NUM_CPUS 32 struct hv_input_signal_event_buffer { @@ -137,8 +137,8 @@ extern u16 HvPostMessage(union hv_connection_id connectionId, extern u16 HvSignalEvent(void); -extern int HvSynicInit(u32 irqVector); +extern void HvSynicInit(void *irqarg); -extern void HvSynicCleanup(void); +extern void HvSynicCleanup(void *arg); #endif /* __HV_H__ */ diff --git a/drivers/staging/hv/Vmbus.c b/drivers/staging/hv/Vmbus.c index a4dd06f6d459..35a023e9f9d1 100644 --- a/drivers/staging/hv/Vmbus.c +++ b/drivers/staging/hv/Vmbus.c @@ -129,7 +129,7 @@ static int VmbusOnDeviceAdd(struct hv_device *dev, void *AdditionalInfo) /* strcpy(dev->name, "vmbus"); */ /* SynIC setup... */ - ret = HvSynicInit(*irqvector); + on_each_cpu(HvSynicInit, (void *)irqvector, 1); /* Connect to VMBus in the root partition */ ret = VmbusConnect(); @@ -150,7 +150,7 @@ static int VmbusOnDeviceRemove(struct hv_device *dev) DPRINT_ENTER(VMBUS); VmbusChannelReleaseUnattachedChannels(); VmbusDisconnect(); - HvSynicCleanup(); + on_each_cpu(HvSynicCleanup, NULL, 1); DPRINT_EXIT(VMBUS); return ret; @@ -173,7 +173,8 @@ static void VmbusOnCleanup(struct hv_driver *drv) */ static void VmbusOnMsgDPC(struct hv_driver *drv) { - void *page_addr = gHvContext.synICMessagePage[0]; + int cpu = smp_processor_id(); + void *page_addr = gHvContext.synICMessagePage[cpu]; struct hv_message *msg = (struct hv_message *)page_addr + VMBUS_MESSAGE_SINT; struct hv_message *copied; @@ -230,11 +231,12 @@ static void VmbusOnEventDPC(struct hv_driver *drv) static int VmbusOnISR(struct hv_driver *drv) { int ret = 0; + int cpu = smp_processor_id(); void *page_addr; struct hv_message *msg; union hv_synic_event_flags *event; - page_addr = gHvContext.synICMessagePage[0]; + page_addr = gHvContext.synICMessagePage[cpu]; msg = (struct hv_message *)page_addr + VMBUS_MESSAGE_SINT; DPRINT_ENTER(VMBUS); @@ -248,7 +250,7 @@ static int VmbusOnISR(struct hv_driver *drv) } /* TODO: Check if there are events to be process */ - page_addr = gHvContext.synICEventPage[0]; + page_addr = gHvContext.synICEventPage[cpu]; event = (union hv_synic_event_flags *)page_addr + VMBUS_MESSAGE_SINT; /* Since we are a child, we only need to check bit 0 */ -- cgit v1.2.3 From 25719e6b4631959c9ecb1db6967537a124c4a7fa Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Tue, 5 Jan 2010 14:30:31 +0100 Subject: USB: serial: fix USB serial fix kfifo_len locking This patch fix a possible race bug in drivers/usb/serial/generic with the new kfifo API. Please apply it to the 2.6.33-rc* tree. Signed-off-by: Stefani Seibold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/generic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index f1ea3a33b6e6..5ce033ab9b99 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -386,12 +386,12 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) dbg("%s - port %d", __func__, port->number); - if (serial->type->max_in_flight_urbs) { - spin_lock_irqsave(&port->lock, flags); + spin_lock_irqsave(&port->lock, flags); + if (serial->type->max_in_flight_urbs) chars = port->tx_bytes_flight; - spin_unlock_irqrestore(&port->lock, flags); - } else if (serial->num_bulk_out) + else if (serial->num_bulk_out) chars = kfifo_len(&port->write_fifo); + spin_unlock_irqrestore(&port->lock, flags); dbg("%s - returns %d", __func__, chars); return chars; -- cgit v1.2.3 From 2591530204a76fecc843529ade56afe865dd2657 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 6 Jan 2010 15:48:42 -0800 Subject: usb: serial: fix memory leak in generic driver Fix a regression introduced by commit 715b1dc01fe44537e8fce9566e4bb48d6821d84b ("USB: usb_debug, usb_generic_serial: implement multi urb write"). URB transfer buffer was never freed when using multi-urb writes. Currently the only driver enabling multi-urb writes is usb_debug. Signed-off-by: Johan Hovold Cc: Greg KH Acked-by: Jason Wessel Cc: stable Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/generic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 5ce033ab9b99..83443d6306d6 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -489,6 +489,8 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) dbg("%s - port %d", __func__, port->number); if (port->serial->type->max_in_flight_urbs) { + kfree(urb->transfer_buffer); + spin_lock_irqsave(&port->lock, flags); --port->urbs_in_flight; port->tx_bytes_flight -= urb->transfer_buffer_length; -- cgit v1.2.3 From a91b593edd4b3e8aa91f671b763b27b8119eb49d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Dec 2009 23:16:32 -0500 Subject: USB: fix bitmask merge error This patch adds a mask bit which was mistakenly omitted from the as1311 patch (usb-storage: add BAD_SENSE flag). Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/usb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 5a53d4f0dd11..e9f995486ec1 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -434,7 +434,8 @@ static void adjust_quirks(struct us_data *us) u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor); u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct); unsigned f = 0; - unsigned int mask = (US_FL_SANE_SENSE | US_FL_FIX_CAPACITY | + unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE | + US_FL_FIX_CAPACITY | US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE | US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 | US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE | -- cgit v1.2.3 From acbe2febe71abb2360b008e9ab3ee5c44169f78c Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 12 Jan 2010 12:32:50 +0100 Subject: USB: Don't use GFP_KERNEL while we cannot reset a storage device Memory allocations with GFP_KERNEL can cause IO to a storage device which can fail resulting in a need to reset the device. Therefore GFP_KERNEL cannot be safely used between usb_lock_device() and usb_unlock_device(). Replace by GFP_NOIO. Signed-off-by: Oliver Neukum Cc: stable Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devices.c | 2 +- drivers/usb/core/message.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 96f11715cd26..355dffcc23b0 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -494,7 +494,7 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, return 0; /* allocate 2^1 pages = 8K (on i386); * should be more than enough for one device */ - pages_start = (char *)__get_free_pages(GFP_KERNEL, 1); + pages_start = (char *)__get_free_pages(GFP_NOIO, 1); if (!pages_start) return -ENOMEM; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 1b994846e8e0..9bc95fec793f 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -906,11 +906,11 @@ char *usb_cache_string(struct usb_device *udev, int index) if (index <= 0) return NULL; - buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL); + buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO); if (buf) { len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE); if (len > 0) { - smallbuf = kmalloc(++len, GFP_KERNEL); + smallbuf = kmalloc(++len, GFP_NOIO); if (!smallbuf) return buf; memcpy(smallbuf, buf, len); @@ -1731,7 +1731,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration) if (cp) { nintf = cp->desc.bNumInterfaces; new_interfaces = kmalloc(nintf * sizeof(*new_interfaces), - GFP_KERNEL); + GFP_NOIO); if (!new_interfaces) { dev_err(&dev->dev, "Out of memory\n"); return -ENOMEM; @@ -1740,7 +1740,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration) for (; n < nintf; ++n) { new_interfaces[n] = kzalloc( sizeof(struct usb_interface), - GFP_KERNEL); + GFP_NOIO); if (!new_interfaces[n]) { dev_err(&dev->dev, "Out of memory\n"); ret = -ENOMEM; -- cgit v1.2.3 From 1b9a38bfa6e664ff02511314f5586d711c83cc91 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 11:17:55 -0500 Subject: USB: EHCI: fix handling of unusual interrupt intervals This patch (as1320) fixes two problems related to interrupt-URB scheduling in ehci-hcd. URBs with an interval of 2 or 4 microframes aren't handled. For the time being, the patch reduces to interval to 1 uframe. URBs are constrained to have an interval no larger than 1024 frames by usb_submit_urb(). But some EHCI controllers allow use of a schedule as short as 256 frames; for these controllers we may have to decrease the interval to the actual schedule length. The second problem isn't very significant since few devices expose interrupt endpoints with an interval larger than 256 frames. But the first problem is critical; it will prevent the kernel from working with devices having interrupt intervals of 2 or 4 uframes. Signed-off-by: Alan Stern Cc: stable Tested-by: Glynn Farrow Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-q.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index a427d3b00634..89521775c567 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -849,9 +849,10 @@ qh_make ( * But interval 1 scheduling is simpler, and * includes high bandwidth. */ - dbg ("intr period %d uframes, NYET!", - urb->interval); - goto done; + urb->interval = 1; + } else if (qh->period > ehci->periodic_size) { + qh->period = ehci->periodic_size; + urb->interval = qh->period << 3; } } else { int think_time; @@ -874,6 +875,10 @@ qh_make ( usb_calc_bus_time (urb->dev->speed, is_input, 0, max_packet (maxp))); qh->period = urb->interval; + if (qh->period > ehci->periodic_size) { + qh->period = ehci->periodic_size; + urb->interval = qh->period; + } } } -- cgit v1.2.3 From cec3a53c7fe794237b582e8e77fc0e48465e65ee Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 11:18:20 -0500 Subject: USB: EHCI & UHCI: fix race between root-hub suspend and port resume This patch (as1321) fixes a problem with EHCI and UHCI root-hub suspends: If the suspend occurs while a port is trying to resume, the resume doesn't finish and simply gets lost. When remote wakeup is enabled, this is undesirable behavior. The patch checks first to see if any port resumes are in progress, and if they are then it fails the root-hub suspend with -EBUSY. Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hub.c | 20 +++++++++++++++++++- drivers/usb/host/uhci-hcd.c | 15 ++++++++++++++- 2 files changed, 33 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 2c6571c05f35..c75d9270c752 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -120,9 +120,26 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) del_timer_sync(&ehci->watchdog); del_timer_sync(&ehci->iaa_watchdog); - port = HCS_N_PORTS (ehci->hcs_params); spin_lock_irq (&ehci->lock); + /* Once the controller is stopped, port resumes that are already + * in progress won't complete. Hence if remote wakeup is enabled + * for the root hub and any ports are in the middle of a resume or + * remote wakeup, we must fail the suspend. + */ + if (hcd->self.root_hub->do_remote_wakeup) { + port = HCS_N_PORTS(ehci->hcs_params); + while (port--) { + if (ehci->reset_done[port] != 0) { + spin_unlock_irq(&ehci->lock); + ehci_dbg(ehci, "suspend failed because " + "port %d is resuming\n", + port + 1); + return -EBUSY; + } + } + } + /* stop schedules, clean any completed work */ if (HC_IS_RUNNING(hcd->state)) { ehci_quiesce (ehci); @@ -138,6 +155,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) */ ehci->bus_suspended = 0; ehci->owned_ports = 0; + port = HCS_N_PORTS(ehci->hcs_params); while (port--) { u32 __iomem *reg = &ehci->regs->port_status [port]; u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 5cd0e48f67fb..99cd00fd3514 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -749,7 +749,20 @@ static int uhci_rh_suspend(struct usb_hcd *hcd) spin_lock_irq(&uhci->lock); if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) rc = -ESHUTDOWN; - else if (!uhci->dead) + else if (uhci->dead) + ; /* Dead controllers tell no tales */ + + /* Once the controller is stopped, port resumes that are already + * in progress won't complete. Hence if remote wakeup is enabled + * for the root hub and any ports are in the middle of a resume or + * remote wakeup, we must fail the suspend. + */ + else if (hcd->self.root_hub->do_remote_wakeup && + uhci->resuming_ports) { + dev_dbg(uhci_dev(uhci), "suspend failed because a port " + "is resuming\n"); + rc = -EBUSY; + } else suspend_rh(uhci, UHCI_RH_SUSPENDED); spin_unlock_irq(&uhci->lock); return rc; -- cgit v1.2.3 From 49d0f078f494b9d81e820a13dd8093a9bfb0b6b1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 11:18:38 -0500 Subject: USB: add missing delay during remote wakeup This patch (as1330) fixes a bug in khbud's handling of remote wakeups. When a device sends a remote-wakeup request, the parent hub (or the host controller driver, for directly attached devices) begins the resume sequence and notifies khubd when the sequence finishes. At this point the port's SUSPEND feature is automatically turned off. However the device needs an additional 10-ms resume-recovery time (TRSMRCY in the USB spec). Khubd does not wait for this delay if the SUSPEND feature is off, and as a result some devices fail to behave properly following a remote wakeup. This patch adds the missing delay to the remote-wakeup path. It also extends the resume-signalling delay used by ehci-hcd and uhci-hcd from 20 ms (the value in the spec) to 25 ms (the value we use for non-remote-wakeup resumes). The extra time appears to help some devices. Signed-off-by: Alan Stern Cc: stable Cc: Rickard Bellini Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 3 +++ drivers/usb/host/ehci-hcd.c | 5 +++-- drivers/usb/host/uhci-hub.c | 2 +- 3 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 0cec6caf6e9b..b9f5fcd713e2 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3347,6 +3347,9 @@ static void hub_events(void) USB_PORT_FEAT_C_SUSPEND); udev = hdev->children[i-1]; if (udev) { + /* TRSMRCY = 10 msec */ + msleep(10); + usb_lock_device(udev); ret = remote_wakeup(hdev-> children[i-1]); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 5859522d6edd..1ec3857f22e6 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -787,9 +787,10 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* start 20 msec resume signaling from this port, * and make khubd collect PORT_STAT_C_SUSPEND to - * stop that signaling. + * stop that signaling. Use 5 ms extra for safety, + * like usb_port_resume() does. */ - ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); + ehci->reset_done[i] = jiffies + msecs_to_jiffies(25); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); mod_timer(&hcd->rh_timer, ehci->reset_done[i]); } diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 885b585360b9..8270055848ca 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -167,7 +167,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci) /* Port received a wakeup request */ set_bit(port, &uhci->resuming_ports); uhci->ports_timeout = jiffies + - msecs_to_jiffies(20); + msecs_to_jiffies(25); /* Make sure we see the port again * after the resuming period is over. */ -- cgit v1.2.3 From b132b04e193908a94d95065d0628f8fb0159cc55 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 14 Jan 2010 10:33:19 -0800 Subject: USB: add speed values for USB 3.0 and wireless controllers These controllers say "unknown" for their speed in sysfs, which obviously isn't correct. Reported-by: Kurt Garloff Cc: Sarah Sharp Cc: David Vrabel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/sysfs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 485edf937f25..5f3908f6e2dc 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -115,6 +115,12 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf) case USB_SPEED_HIGH: speed = "480"; break; + case USB_SPEED_VARIABLE: + speed = "480"; + break; + case USB_SPEED_SUPER: + speed = "5000"; + break; default: speed = "unknown"; } -- cgit v1.2.3 From 04a723ea9c53ba608b0411aa36948bb57c51a08e Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 6 Jan 2010 10:16:51 -0800 Subject: USB: Fix duplicate sysfs problem after device reset. Borislav Petkov reports issues with duplicate sysfs endpoint files after a resume from a hibernate. It turns out that the code to support alternate settings under xHCI has issues when a device with a non-default alternate setting is reset during the hibernate: [ 427.681810] Restarting tasks ... [ 427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 427.682019] usb usb3: usb resume [ 427.682030] ohci_hcd 0000:00:12.0: wakeup root hub [ 427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 427.682205] usb 1-2: usb wakeup-resume [ 427.682226] usb 1-2: finish reset-resume [ 427.682886] done. [ 427.734658] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.746682] hub 3-0:1.0: hub_reset_resume [ 427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 427.839653] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS [ 427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1 [ 427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1 [ 427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed. [ 427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0 [ 427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1 [ 427.916609] ep_81: create, parent hub [ 427.916632] ------------[ cut here ]------------ [ 427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96() [ 427.916649] Hardware name: System Product Name [ 427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81' [ 427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat +8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core [ 427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869a-dirty #13 [ 427.916699] Call Trace: The problem is caused by a mismatch between the USB core's view of the device state and the USB device and xHCI host's view of the device state. After the device reset and re-configuration, the device and the xHCI host think they are using alternate setting 0 of all interfaces. However, the USB core keeps track of the old state, which may include non-zero alternate settings. It uses intf->cur_altsetting to keep the endpoint sysfs files for the old state across the reset. The bandwidth allocation functions need to know what the xHCI host thinks the current alternate settings are, so original patch set intf->cur_altsetting to the alternate setting 0. This caused duplicate endpoint files to be created. The solution is to not set intf->cur_altsetting before calling usb_set_interface() in usb_reset_and_verify_device(). Instead, we add a new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use alternate setting 0 as the currently installed alternate setting. Signed-off-by: Sarah Sharp Tested-by: Borislav Petkov Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 18 ++++++++++++++++++ drivers/usb/core/hub.c | 15 +++++---------- include/linux/usb.h | 1 + 3 files changed, 24 insertions(+), 10 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 0495fa651225..80995ef0868c 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1684,6 +1684,24 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev, } } if (cur_alt && new_alt) { + struct usb_interface *iface = usb_ifnum_to_if(udev, + cur_alt->desc.bInterfaceNumber); + + if (iface->resetting_device) { + /* + * The USB core just reset the device, so the xHCI host + * and the device will think alt setting 0 is installed. + * However, the USB core will pass in the alternate + * setting installed before the reset as cur_alt. Dig + * out the alternate setting 0 structure, or the first + * alternate setting if a broken device doesn't have alt + * setting 0. + */ + cur_alt = usb_altnum_to_altsetting(iface, 0); + if (!cur_alt) + cur_alt = &iface->altsetting[0]; + } + /* Drop all the endpoints in the current alt setting */ for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) { ret = hcd->driver->drop_endpoint(hcd, udev, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b9f5fcd713e2..35cc8b9ba1f5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3695,19 +3695,14 @@ static int usb_reset_and_verify_device(struct usb_device *udev) usb_enable_interface(udev, intf, true); ret = 0; } else { - /* We've just reset the device, so it will think alt - * setting 0 is installed. For usb_set_interface() to - * work properly, we need to set the current alternate - * interface setting to 0 (or the first alt setting, if - * the device doesn't have alt setting 0). + /* Let the bandwidth allocation function know that this + * device has been reset, and it will have to use + * alternate setting 0 as the current alternate setting. */ - intf->cur_altsetting = - usb_find_alt_setting(config, i, 0); - if (!intf->cur_altsetting) - intf->cur_altsetting = - &config->intf_cache[i]->altsetting[0]; + intf->resetting_device = 1; ret = usb_set_interface(udev, desc->bInterfaceNumber, desc->bAlternateSetting); + intf->resetting_device = 0; } if (ret < 0) { dev_err(&udev->dev, "failed to restore interface %d " diff --git a/include/linux/usb.h b/include/linux/usb.h index e101a2d04d75..d7ace1b80f09 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -192,6 +192,7 @@ struct usb_interface { unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */ unsigned needs_binding:1; /* needs delayed unbind/rebind */ unsigned reset_running:1; + unsigned resetting_device:1; /* true: bandwidth alloc after reset */ struct device dev; /* interface specific device info */ struct device *usb_dev; -- cgit v1.2.3 From ae35fe9e8abe828b25053cd3efdc6953fbb710e3 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 7 Jan 2010 04:17:32 +0300 Subject: USB: FHCI: avoid NULL pointer dereference Assign fhci only if usb is not NULL. Signed-off-by: Alexander Beregalov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/fhci-hcd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 0951818ef93b..78e7c3cfcb72 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -242,9 +242,10 @@ err: static void fhci_usb_free(void *lld) { struct fhci_usb *usb = lld; - struct fhci_hcd *fhci = usb->fhci; + struct fhci_hcd *fhci; if (usb) { + fhci = usb->fhci; fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); fhci_ep0_free(usb); kfree(usb->actual_frame); -- cgit v1.2.3 From c0d74142531c7ec23bb29885aec8f924ee4c1a46 Mon Sep 17 00:00:00 2001 From: Colin Tuckley Date: Thu, 7 Jan 2010 11:22:47 +0000 Subject: USB: Fix level of isp1760 Reloading ptd error message This error message is not actually an error, it's an information message. It is triggered when a transfer which ended in a NAQ is retried successfully by the hardware. Signed-off-by: Colin Tuckley Cc: Sebastian Andrzej Siewior Cc: Catalin Marinas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1760-hcd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 9600a58299db..27b8f7cb4471 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1039,12 +1039,12 @@ static void do_atl_int(struct usb_hcd *usb_hcd) if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) { u32 buffstatus; - /* XXX + /* * NAKs are handled in HW by the chip. Usually if the * device is not able to send data fast enough. - * This did not trigger for a long time now. + * This happens mostly on slower hardware. */ - printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: " + printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: " "%d of %zu done: %08x cur: %08x\n", qtd, urb, qh, PTD_XFERRED_LENGTH(dw3), qtd->length, done_map, -- cgit v1.2.3 From 10d2cdb6102669279bee2d9a00a22431b74583d5 Mon Sep 17 00:00:00 2001 From: Ryan May Date: Wed, 6 Jan 2010 10:09:25 -0600 Subject: USB: fix usbstorage for 2770:915d delivers no FAT Resolves kernel.org bug 14914. Remove entry for 2770:915d (usb digital camera with mass storage support) from unusual_devs.h. The fix triggered by the entry causes the file system on the camera to be completely inaccessible (no partition table, the device is not mountable). The patch works, but let me clarify a few things about it. All the patch does is remove the entry for this device from the drivers/usb/storage/unusual_devs.h, which is supposed to help with a problem with the device's reported size (I think). I'm pretty sure it was originally added for a reason, so I'm not sure removing it won't cause other problems to reappear. Also, I should note that this unusual_devs.h entry was present (and activating workarounds) in 2.6.29, but in that version everything works fine. Starting with 2.6.30, things no longer work. Signed-off-by: Ryan May Cc: Rohan Hart Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 64a0a2c27e12..c932f9053188 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1807,13 +1807,6 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_GO_SLOW ), -/* Reported by Rohan Hart */ -UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010, - "INTOVA", - "Pixtreme", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_CAPACITY ), - /* Reported by Frederic Marchal * Mio Moov 330 */ -- cgit v1.2.3 From 96b85179b464cc80d85b5c602af119d1dd6d50bb Mon Sep 17 00:00:00 2001 From: Lothar Wassmann Date: Fri, 15 Jan 2010 08:04:55 -0500 Subject: USB: isp1362: better 64bit printf warning fixes Some hosts that treat the return value of sizeof differently from unsigned long might still hit warnings. So use %zu for sizeof() values. This is a better version of the previous commit b0a9cf297e58721933. Signed-off-by: Lothar Wassmann Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1362-hcd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 73352f3739b5..8d3104441f16 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2270,10 +2270,10 @@ static int isp1362_mem_config(struct usb_hcd *hcd) dev_info(hcd->self.controller, "ISP1362 Memory usage:\n"); dev_info(hcd->self.controller, " ISTL: 2 * %4d: %4d @ $%04x:$%04x\n", istl_size / 2, istl_size, 0, istl_size / 2); - dev_info(hcd->self.controller, " INTL: %4d * (%3lu+8): %4d @ $%04x\n", + dev_info(hcd->self.controller, " INTL: %4d * (%3zu+8): %4d @ $%04x\n", ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE, intl_size, istl_size); - dev_info(hcd->self.controller, " ATL : %4d * (%3lu+8): %4d @ $%04x\n", + dev_info(hcd->self.controller, " ATL : %4d * (%3zu+8): %4d @ $%04x\n", atl_buffers, atl_blksize - PTD_HEADER_SIZE, atl_size, istl_size + intl_size); dev_info(hcd->self.controller, " USED/FREE: %4d %4d\n", total, -- cgit v1.2.3 From 0a2fea2e0dea9df8ead1cb45e4b9cd68e1b1d29b Mon Sep 17 00:00:00 2001 From: Lothar Wassmann Date: Fri, 15 Jan 2010 14:42:02 -0500 Subject: USB: isp1362: fix build failure on ARM systems via irq_flags cleanup There was some left over #ifdef ARM logic that is outdated but no one really noticed. So instead of relying on this tricky logic, properly load and utilize the platform irq_flags resources. Reported-by: Ben Hutchings Signed-off-by: Lothar Wassmann Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1362-hcd.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 8d3104441f16..42971657fde2 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2697,6 +2697,8 @@ static int __init isp1362_probe(struct platform_device *pdev) void __iomem *data_reg; int irq; int retval = 0; + struct resource *irq_res; + unsigned int irq_flags = 0; /* basic sanity checks first. board-specific init logic should * have initialized this the three resources and probably board @@ -2710,11 +2712,12 @@ static int __init isp1362_probe(struct platform_device *pdev) data = platform_get_resource(pdev, IORESOURCE_MEM, 0); addr = platform_get_resource(pdev, IORESOURCE_MEM, 1); - irq = platform_get_irq(pdev, 0); - if (!addr || !data || irq < 0) { + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!addr || !data || !irq_res) { retval = -ENODEV; goto err1; } + irq = irq_res->start; #ifdef CONFIG_USB_HCD_DMA if (pdev->dev.dma_mask) { @@ -2781,12 +2784,16 @@ static int __init isp1362_probe(struct platform_device *pdev) } #endif -#ifdef CONFIG_ARM - if (isp1362_hcd->board) - set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING); -#endif + if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE) + irq_flags |= IRQF_TRIGGER_RISING; + if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE) + irq_flags |= IRQF_TRIGGER_FALLING; + if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL) + irq_flags |= IRQF_TRIGGER_HIGH; + if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL) + irq_flags |= IRQF_TRIGGER_LOW; - retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED); if (retval != 0) goto err6; pr_info("%s, irq %d\n", hcd->product_desc, irq); -- cgit v1.2.3 From 50b926e439620c469565e8be0f28be78f5fca1ce Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Mon, 4 Jan 2010 14:44:56 +0100 Subject: sched: Fix vmark regression on big machines SD_PREFER_SIBLING is set at the CPU domain level if power saving isn't enabled, leading to many cache misses on large machines as we traverse looking for an idle shared cache to wake to. Change the enabler of select_idle_sibling() to SD_SHARE_PKG_RESOURCES, and enable same at the sibling domain level. Reported-by: Lin Ming Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra LKML-Reference: <1262612696.15495.15.camel@marge.simson.net> Signed-off-by: Ingo Molnar --- include/linux/topology.h | 2 +- kernel/sched_fair.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/topology.h b/include/linux/topology.h index 57e63579bfdd..5b81156780b1 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -99,7 +99,7 @@ int arch_update_cpu_topology(void); | 1*SD_WAKE_AFFINE \ | 1*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ - | 0*SD_SHARE_PKG_RESOURCES \ + | 1*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ | 0*SD_PREFER_SIBLING \ , \ diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 42ac3c9f66f6..8fe7ee81c552 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1508,7 +1508,7 @@ static int select_task_rq_fair(struct task_struct *p, int sd_flag, int wake_flag * If there's an idle sibling in this domain, make that * the wake_affine target instead of the current cpu. */ - if (tmp->flags & SD_PREFER_SIBLING) + if (tmp->flags & SD_SHARE_PKG_RESOURCES) target = select_idle_sibling(p, tmp, target); if (target >= 0) { -- cgit v1.2.3 From 6d558c3ac9b6508d26fd5cadccce51fc9d726b1c Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Mon, 11 Jan 2010 14:21:25 +0800 Subject: sched: Reassign prev and switch_count when reacquire_kernel_lock() fail Assume A->B schedule is processing, if B have acquired BKL before and it need reschedule this time. Then on B's context, it will go to need_resched_nonpreemptible for reschedule. But at this time, prev and switch_count are related to A. It's wrong and will lead to incorrect scheduler statistics. Signed-off-by: Yong Zhang Signed-off-by: Peter Zijlstra LKML-Reference: <2674af741001102238w7b0ddcadref00d345e2181d11@mail.gmail.com> Signed-off-by: Ingo Molnar --- kernel/sched.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index c535cc4f6428..4508fe7048be 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5530,8 +5530,11 @@ need_resched_nonpreemptible: post_schedule(rq); - if (unlikely(reacquire_kernel_lock(current) < 0)) + if (unlikely(reacquire_kernel_lock(current) < 0)) { + prev = rq->curr; + switch_count = &prev->nivcsw; goto need_resched_nonpreemptible; + } preempt_enable_no_resched(); if (need_resched()) -- cgit v1.2.3 From fe432200abb0d64f409895168d9ad8fbb9d8e6c6 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 18 Jan 2010 09:08:26 +0100 Subject: perf: Fix perf_event_do_pending() fallback callsite Paul questioned the context in which we should call perf_event_do_pending(). After looking at that I found that it should be called from IRQ context these days, however the fallback call-site is placed in softirq context. Ammend this by placing the callback in the IRQ timer path. Reported-by: Paul Mackerras Signed-off-by: Peter Zijlstra LKML-Reference: <1263374859.4244.192.camel@laptop> Signed-off-by: Ingo Molnar --- kernel/timer.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/kernel/timer.c b/kernel/timer.c index 15533b792397..c61a7949387f 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1198,6 +1198,7 @@ void update_process_times(int user_tick) run_local_timers(); rcu_check_callbacks(cpu, user_tick); printk_tick(); + perf_event_do_pending(); scheduler_tick(); run_posix_cpu_timers(p); } @@ -1209,8 +1210,6 @@ static void run_timer_softirq(struct softirq_action *h) { struct tvec_base *base = __get_cpu_var(tvec_bases); - perf_event_do_pending(); - hrtimer_run_pending(); if (time_after_eq(jiffies, base->timer_jiffies)) -- cgit v1.2.3 From 22e190851f8709c48baf00ed9ce6144cdc54d025 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 18 Jan 2010 09:12:32 +0100 Subject: perf: Honour event state for aux stream data Anton reported that perf record kept receiving events even after calling ioctl(PERF_EVENT_IOC_DISABLE). It turns out that FORK,COMM and MMAP events didn't respect the disabled state and kept flowing in. Reported-by: Anton Blanchard Signed-off-by: Peter Zijlstra Tested-by: Anton Blanchard LKML-Reference: <1263459187.4244.265.camel@laptop> CC: stable@kernel.org Signed-off-by: Ingo Molnar --- kernel/perf_event.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 603c0d8b5df1..d27746bd3a06 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -3268,6 +3268,9 @@ static void perf_event_task_output(struct perf_event *event, static int perf_event_task_match(struct perf_event *event) { + if (event->state != PERF_EVENT_STATE_ACTIVE) + return 0; + if (event->cpu != -1 && event->cpu != smp_processor_id()) return 0; @@ -3377,6 +3380,9 @@ static void perf_event_comm_output(struct perf_event *event, static int perf_event_comm_match(struct perf_event *event) { + if (event->state != PERF_EVENT_STATE_ACTIVE) + return 0; + if (event->cpu != -1 && event->cpu != smp_processor_id()) return 0; @@ -3494,6 +3500,9 @@ static void perf_event_mmap_output(struct perf_event *event, static int perf_event_mmap_match(struct perf_event *event, struct perf_mmap_event *mmap_event) { + if (event->state != PERF_EVENT_STATE_ACTIVE) + return 0; + if (event->cpu != -1 && event->cpu != smp_processor_id()) return 0; -- cgit v1.2.3 From 92b6759857ea3ad19bc6871044e373f6251841d3 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 18 Jan 2010 14:02:16 +0100 Subject: perf: Change the is_software_event() definition The is_software_event() definition always confuses me because its an exclusive expression, make it an inclusive one. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index c66b34f75eea..8fa71874113f 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -814,9 +814,14 @@ extern int perf_event_overflow(struct perf_event *event, int nmi, */ static inline int is_software_event(struct perf_event *event) { - return (event->attr.type != PERF_TYPE_RAW) && - (event->attr.type != PERF_TYPE_HARDWARE) && - (event->attr.type != PERF_TYPE_HW_CACHE); + switch (event->attr.type) { + case PERF_TYPE_SOFTWARE: + case PERF_TYPE_TRACEPOINT: + /* for now the breakpoint stuff also works as software event */ + case PERF_TYPE_BREAKPOINT: + return 1; + } + return 0; } extern atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX]; -- cgit v1.2.3 From b27d515a49169e5e2a92d621faac761074a8c5b1 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Mon, 18 Jan 2010 10:58:01 +0200 Subject: perf: x86: Add support for the ANY bit Propagate the ANY bit into the fixed counter config for v3 and higher. Signed-off-by: Stephane Eranian [a.p.zijlstra@chello.nl: split from larger patch] Signed-off-by: Peter Zijlstra LKML-Reference: <4b5430c6.0f975e0a.1bf9.ffff85fe@mx.google.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/perf_event.h | 1 + arch/x86/kernel/cpu/perf_event.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index 8d9f8548a870..1380367dabd9 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -19,6 +19,7 @@ #define MSR_ARCH_PERFMON_EVENTSEL1 0x187 #define ARCH_PERFMON_EVENTSEL0_ENABLE (1 << 22) +#define ARCH_PERFMON_EVENTSEL_ANY (1 << 21) #define ARCH_PERFMON_EVENTSEL_INT (1 << 20) #define ARCH_PERFMON_EVENTSEL_OS (1 << 17) #define ARCH_PERFMON_EVENTSEL_USR (1 << 16) diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index d616c06e99b4..8c1c07073ccc 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1343,6 +1343,13 @@ intel_pmu_enable_fixed(struct hw_perf_event *hwc, int __idx) bits |= 0x2; if (hwc->config & ARCH_PERFMON_EVENTSEL_OS) bits |= 0x1; + + /* + * ANY bit is supported in v3 and up + */ + if (x86_pmu.version > 2 && hwc->config & ARCH_PERFMON_EVENTSEL_ANY) + bits |= 0x4; + bits <<= (idx * 4); mask = 0xfULL << (idx * 4); -- cgit v1.2.3 From 88f5004430babb836cfce886d5d54c82166f8ba4 Mon Sep 17 00:00:00 2001 From: Yongseok Koh Date: Tue, 19 Jan 2010 17:33:49 +0900 Subject: vmalloc: remove BUG_ON due to racy counting of VM_LAZY_FREE In free_unmap_area_noflush(), va->flags is marked as VM_LAZY_FREE first, and then vmap_lazy_nr is increased atomically. But, in __purge_vmap_area_lazy(), while traversing of vmap_are_list, nr is counted by checking VM_LAZY_FREE is set to va->flags. After counting the variable nr, kernel reads vmap_lazy_nr atomically and checks a BUG_ON condition whether nr is greater than vmap_lazy_nr to prevent vmap_lazy_nr from being negative. The problem is that, if interrupted right after marking VM_LAZY_FREE, increment of vmap_lazy_nr can be delayed. Consequently, BUG_ON condition can be met because nr is counted more than vmap_lazy_nr. It is highly probable when vmalloc/vfree are called frequently. This scenario have been verified by adding delay between marking VM_LAZY_FREE and increasing vmap_lazy_nr in free_unmap_area_noflush(). Even the vmap_lazy_nr is for checking high watermark, it never be the strict watermark. Although the BUG_ON condition is to prevent vmap_lazy_nr from being negative, vmap_lazy_nr is signed variable. So, it could go down to negative value temporarily. Consequently, removing the BUG_ON condition is proper. A possible BUG_ON message is like the below. kernel BUG at mm/vmalloc.c:517! invalid opcode: 0000 [#1] SMP EIP: 0060:[] EFLAGS: 00010297 CPU: 3 EIP is at __purge_vmap_area_lazy+0x144/0x150 EAX: ee8a8818 EBX: c08e77d4 ECX: e7c7ae40 EDX: c08e77ec ESI: 000081fe EDI: e7c7ae60 EBP: e7c7ae64 ESP: e7c7ae3c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Call Trace: [] free_unmap_vmap_area_noflush+0x69/0x70 [] remove_vm_area+0x22/0x70 [] __vunmap+0x45/0xe0 [] vmalloc+0x2c/0x30 Code: 8d 59 e0 eb 04 66 90 89 cb 89 d0 e8 87 fe ff ff 8b 43 20 89 da 8d 48 e0 8d 43 20 3b 04 24 75 e7 fe 05 a8 a5 a3 c0 e9 78 ff ff ff <0f> 0b eb fe 90 8d b4 26 00 00 00 00 56 89 c6 b8 ac a5 a3 c0 31 EIP: [] __purge_vmap_area_lazy+0x144/0x150 SS:ESP 0068:e7c7ae3c [ See also http://marc.info/?l=linux-kernel&m=126335856228090&w=2 ] Signed-off-by: Yongseok Koh Reviewed-by: Minchan Kim Cc: Nick Piggin Cc: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 37e69295f250..d55d905463eb 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -555,10 +555,8 @@ static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end, } rcu_read_unlock(); - if (nr) { - BUG_ON(nr > atomic_read(&vmap_lazy_nr)); + if (nr) atomic_sub(nr, &vmap_lazy_nr); - } if (nr || force_flush) flush_tlb_kernel_range(*start, *end); -- cgit v1.2.3 From 92dcffb916d309aa01778bf8963a6932e4014d07 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 21 Jan 2010 15:31:35 -0800 Subject: Linux 2.6.33-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 5f333bf870f4..67d6cff6e4d4 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 33 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- cgit v1.2.3 From 0a0300dc8c4b3f3ce5c9ef5a0a4be5442590398f Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 12 Jan 2010 12:28:00 +0000 Subject: ARM: Consolidate clks_register() and similar Most machine classes want some way to register a block of clk_lookup structures, and most do it by implementing a clks_register() type function which walks an array, or by open-coding a loop. Consolidate all this into clkdev_add_table(). Acked-by: H Hartley Sweeten Reviewed-by: Kevin Hilman Acked-by: Eric Miao Signed-off-by: Russell King --- arch/arm/common/clkdev.c | 10 ++++++++++ arch/arm/include/asm/clkdev.h | 3 +++ arch/arm/mach-bcmring/core.c | 3 +-- arch/arm/mach-ep93xx/clock.c | 4 +--- arch/arm/mach-integrator/core.c | 3 +-- arch/arm/mach-integrator/integrator_cp.c | 4 +--- arch/arm/mach-mmp/clock.c | 8 -------- arch/arm/mach-mmp/clock.h | 2 -- arch/arm/mach-mmp/pxa168.c | 2 +- arch/arm/mach-mmp/pxa910.c | 2 +- arch/arm/mach-mx1/clock.c | 4 +--- arch/arm/mach-mx2/clock_imx21.c | 4 +--- arch/arm/mach-mx2/clock_imx27.c | 4 +--- arch/arm/mach-mx25/clock.c | 6 +----- arch/arm/mach-mx3/clock-imx35.c | 4 +--- arch/arm/mach-mx3/clock.c | 4 +--- arch/arm/mach-mxc91231/clock.c | 4 +--- arch/arm/mach-pxa/clock.c | 8 -------- arch/arm/mach-pxa/clock.h | 4 ---- arch/arm/mach-pxa/eseries.c | 2 +- arch/arm/mach-pxa/pxa25x.c | 4 ++-- arch/arm/mach-pxa/pxa27x.c | 2 +- arch/arm/mach-pxa/pxa300.c | 4 ++-- arch/arm/mach-pxa/pxa320.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 2 +- arch/arm/mach-realview/core.c | 5 +---- arch/arm/mach-u300/clock.c | 5 +---- arch/arm/mach-ux500/clock.c | 5 +---- arch/arm/mach-versatile/core.c | 3 +-- arch/arm/mach-w90x900/clock.c | 9 --------- arch/arm/mach-w90x900/clock.h | 1 - arch/arm/mach-w90x900/cpu.c | 2 +- arch/arm/plat-stmp3xxx/clock.c | 3 +-- 33 files changed, 40 insertions(+), 92 deletions(-) diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index aae5bc01acc8..446b696196e3 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -99,6 +99,16 @@ void clkdev_add(struct clk_lookup *cl) } EXPORT_SYMBOL(clkdev_add); +void __init clkdev_add_table(struct clk_lookup *cl, size_t num) +{ + mutex_lock(&clocks_mutex); + while (num--) { + list_add_tail(&cl->node, &clocks); + cl++; + } + mutex_unlock(&clocks_mutex); +} + #define MAX_DEV_ID 20 #define MAX_CON_ID 16 diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h index b6ec7c627b39..7a0690da5e63 100644 --- a/arch/arm/include/asm/clkdev.h +++ b/arch/arm/include/asm/clkdev.h @@ -27,4 +27,7 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id, void clkdev_add(struct clk_lookup *cl); void clkdev_drop(struct clk_lookup *cl); +void clkdev_add_table(struct clk_lookup *, size_t); +int clk_add_alias(const char *, const char *, char *, struct device *); + #endif diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index e590bbe0a7b4..72e405df0fb0 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -142,8 +142,7 @@ void __init bcmring_amba_init(void) chipcHw_busInterfaceClockEnable(bus_clock); - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 1d0f9d8aff2e..bb3c62196442 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -445,7 +445,6 @@ static void __init ep93xx_dma_clock_init(void) static int __init ep93xx_clock_init(void) { u32 value; - int i; value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1); if (!(value & 0x00800000)) { /* PLL1 bypassed? */ @@ -474,8 +473,7 @@ static int __init ep93xx_clock_init(void) clk_f.rate / 1000000, clk_h.rate / 1000000, clk_p.rate / 1000000); - for (i = 0; i < ARRAY_SIZE(clocks); i++) - clkdev_add(&clocks[i]); + clkdev_add_table(clocks, ARRAY_SIZE(clocks)); return 0; } arch_initcall(ep93xx_clock_init); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index a0f60e55da6a..8b390e36ba69 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -144,8 +144,7 @@ static int __init integrator_init(void) { int i; - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 3f35293d457a..66ef86d6d9e3 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -558,9 +558,7 @@ static void __init intcp_init(void) { int i; - for (i = 0; i < ARRAY_SIZE(cp_lookups); i++) - clkdev_add(&cp_lookups[i]); - + clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups)); platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs)); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c index 2a46ed5cc2a2..886e05648f08 100644 --- a/arch/arm/mach-mmp/clock.c +++ b/arch/arm/mach-mmp/clock.c @@ -88,11 +88,3 @@ unsigned long clk_get_rate(struct clk *clk) return rate; } EXPORT_SYMBOL(clk_get_rate); - -void clks_register(struct clk_lookup *clks, size_t num) -{ - int i; - - for (i = 0; i < num; i++) - clkdev_add(&clks[i]); -} diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h index eefffbe683b0..016ae94691c0 100644 --- a/arch/arm/mach-mmp/clock.h +++ b/arch/arm/mach-mmp/clock.h @@ -68,5 +68,3 @@ struct clk clk_##_name = { \ extern struct clk clk_pxa168_gpio; extern struct clk clk_pxa168_timers; - -extern void clks_register(struct clk_lookup *, size_t); diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 37dbdde17fac..1873c821df90 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -94,7 +94,7 @@ static int __init pxa168_init(void) mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(pxa168_mfp_addr_map); pxa_init_dma(IRQ_PXA168_DMA_INT0, 32); - clks_register(ARRAY_AND_SIZE(pxa168_clkregs)); + clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs)); } return 0; diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index d4049508a4df..46f2d69bef3c 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -131,7 +131,7 @@ static int __init pxa910_init(void) mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(pxa910_mfp_addr_map); pxa_init_dma(IRQ_PXA910_DMA_INT0, 32); - clks_register(ARRAY_AND_SIZE(pxa910_clkregs)); + clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs)); } return 0; diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c index d1b588519ad2..6cf2d4a7511d 100644 --- a/arch/arm/mach-mx1/clock.c +++ b/arch/arm/mach-mx1/clock.c @@ -570,7 +570,6 @@ static struct clk_lookup lookups[] __initdata = { int __init mx1_clocks_init(unsigned long fref) { unsigned int reg; - int i; /* disable clocks we are able to */ __raw_writel(0, SCM_GCCR); @@ -592,8 +591,7 @@ int __init mx1_clocks_init(unsigned long fref) reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET; clko_clk.parent = (struct clk *)clko_clocks[reg]; - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); clk_enable(&hclk); clk_enable(&fclk); diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index 91901b5d56c2..e82b489d1215 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -968,7 +968,6 @@ static struct clk_lookup lookups[] = { */ int __init mx21_clocks_init(unsigned long lref, unsigned long href) { - int i; u32 cscr; external_low_reference = lref; @@ -986,8 +985,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) else spll_clk.parent = &fpm_clk; - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); /* Turn off all clock gates */ __raw_writel(0, CCM_PCCR0); diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index b010bf9ceaab..18c53a6487fa 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -719,7 +719,6 @@ static void __init to2_adjust_clocks(void) int __init mx27_clocks_init(unsigned long fref) { u32 cscr = __raw_readl(CCM_CSCR); - int i; external_high_reference = fref; @@ -736,8 +735,7 @@ int __init mx27_clocks_init(unsigned long fref) to2_adjust_clocks(); - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); /* Turn off all clocks we do not need */ __raw_writel(0, CCM_PCCR0); diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 6e838b857712..66916f104812 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -210,11 +210,7 @@ static struct clk_lookup lookups[] = { int __init mx25_clocks_init(unsigned long fref) { - int i; - - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); - + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 7584b4c6c556..f3f41fa4f21b 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -485,15 +485,13 @@ static struct clk_lookup lookups[] = { int __init mx35_clocks_init() { - int i; unsigned int ll = 0; #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) ll = (3 << 16); #endif - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); /* Turn off all clocks except the ones we need to survive, namely: * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 27a318af0d20..b5c39a016db7 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -578,12 +578,10 @@ static struct clk_lookup lookups[] = { int __init mx31_clocks_init(unsigned long fref) { u32 reg; - int i; ckih_rate = fref; - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); /* change the csi_clk parent if necessary */ reg = __raw_readl(MXC_CCM_CCMR); diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c index ecfa37fef8ad..5c85075d8a56 100644 --- a/arch/arm/mach-mxc91231/clock.c +++ b/arch/arm/mach-mxc91231/clock.c @@ -624,7 +624,6 @@ static struct clk_lookup lookups[] = { int __init mxc91231_clocks_init(unsigned long fref) { void __iomem *gpt_base; - int i; ckih_rate = fref; @@ -632,8 +631,7 @@ int __init mxc91231_clocks_init(unsigned long fref) sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]); sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]); - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR); mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT); diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index 49ae38292310..abba0089a2ae 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -78,11 +78,3 @@ const struct clkops clk_cken_ops = { .enable = clk_cken_enable, .disable = clk_cken_disable, }; - -void clks_register(struct clk_lookup *clks, size_t num) -{ - int i; - - for (i = 0; i < num; i++) - clkdev_add(&clks[i]); -} diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index 978a3667e90d..d8488742b807 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h @@ -67,7 +67,3 @@ extern void clk_pxa3xx_cken_enable(struct clk *); extern void clk_pxa3xx_cken_disable(struct clk *); #endif -void clks_register(struct clk_lookup *clks, size_t num); -int clk_add_alias(const char *alias, const char *alias_name, char *id, - struct device *dev); - diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 91417f035069..96ed13081639 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -128,6 +128,6 @@ static struct clk_lookup eseries_clkregs[] = { void eseries_register_clks(void) { - clks_register(eseries_clkregs, ARRAY_SIZE(eseries_clkregs)); + clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs)); } diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 2c1b0b70d01d..0b9ad30bfd51 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -349,7 +349,7 @@ static int __init pxa25x_init(void) reset_status = RCSR; - clks_register(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs)); + clkdev_add_table(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs)); if ((ret = pxa_init_dma(IRQ_DMA, 16))) return ret; @@ -370,7 +370,7 @@ static int __init pxa25x_init(void) /* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */ if (cpu_is_pxa255()) - clks_register(&pxa25x_hwuart_clkreg, 1); + clkdev_add(&pxa25x_hwuart_clkreg); return ret; } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 6a0b73167e03..d783123e2d48 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -392,7 +392,7 @@ static int __init pxa27x_init(void) reset_status = RCSR; - clks_register(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs)); + clkdev_add_table(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs)); if ((ret = pxa_init_dma(IRQ_DMA, 32))) return ret; diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index f4af6e2bef89..40bb16501d86 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -102,12 +102,12 @@ static int __init pxa300_init(void) if (cpu_is_pxa300() || cpu_is_pxa310()) { mfp_init_base(io_p2v(MFPR_BASE)); mfp_init_addr(pxa300_mfp_addr_map); - clks_register(ARRAY_AND_SIZE(common_clkregs)); + clkdev_add_table(ARRAY_AND_SIZE(common_clkregs)); } if (cpu_is_pxa310()) { mfp_init_addr(pxa310_mfp_addr_map); - clks_register(ARRAY_AND_SIZE(pxa310_clkregs)); + clkdev_add_table(ARRAY_AND_SIZE(pxa310_clkregs)); } return 0; diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index c7373e74a109..8d614ecd8e99 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -90,7 +90,7 @@ static int __init pxa320_init(void) if (cpu_is_pxa320()) { mfp_init_base(io_p2v(MFPR_BASE)); mfp_init_addr(pxa320_mfp_addr_map); - clks_register(ARRAY_AND_SIZE(pxa320_clkregs)); + clkdev_add_table(ARRAY_AND_SIZE(pxa320_clkregs)); } return 0; diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index fcb0721f4669..4d7c03e72504 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -634,7 +634,7 @@ static int __init pxa3xx_init(void) */ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); - clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs)); + clkdev_add_table(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs)); if ((ret = pxa_init_dma(IRQ_DMA, 32))) return ret; diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 9f293438e020..90bd4ef71b2c 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -346,10 +346,7 @@ static struct clk_lookup lookups[] = { static int __init clk_init(void) { - int i; - - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); return 0; } arch_initcall(clk_init); diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index 111f7ea32b38..c174ed1f3691 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -1276,11 +1276,8 @@ static struct clk_lookup lookups[] = { static void __init clk_register(void) { - int i; - /* Register the lookups */ - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); } /* diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 20b6ebb6783a..8359a73d0041 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -85,11 +85,8 @@ static struct clk_lookup lookups[] = { static int __init clk_init(void) { - int i; - /* register the clock lookups */ - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); return 0; } arch_initcall(clk_init); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index e13be7c444ca..9ddb49b1cb71 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -851,8 +851,7 @@ void __init versatile_init(void) { int i; - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); platform_device_register(&versatile_flash_device); platform_device_register(&versatile_i2c_device); diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c index b785994bab0a..2c371ff22e51 100644 --- a/arch/arm/mach-w90x900/clock.c +++ b/arch/arm/mach-w90x900/clock.c @@ -90,12 +90,3 @@ void nuc900_subclk_enable(struct clk *clk, int enable) __raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK); } - - -void clks_register(struct clk_lookup *clks, size_t num) -{ - int i; - - for (i = 0; i < num; i++) - clkdev_add(&clks[i]); -} diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h index f5816a06eed6..c56ddab3d912 100644 --- a/arch/arm/mach-w90x900/clock.h +++ b/arch/arm/mach-w90x900/clock.h @@ -14,7 +14,6 @@ void nuc900_clk_enable(struct clk *clk, int enable); void nuc900_subclk_enable(struct clk *clk, int enable); -void clks_register(struct clk_lookup *clks, size_t num); struct clk { unsigned long cken; diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index 20dc0c96214d..6f5ca532883f 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -208,6 +208,6 @@ void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size) void __init nuc900_init_clocks(void) { - clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs)); + clkdev_add_table(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs)); } diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c index 5d2f19a09e44..e593a2a801c6 100644 --- a/arch/arm/plat-stmp3xxx/clock.c +++ b/arch/arm/plat-stmp3xxx/clock.c @@ -1126,9 +1126,8 @@ static int __init clk_init(void) if (ops && ops->set_parent) ops->set_parent(cl->clk, cl->clk->parent); } - - clkdev_add(cl); } + clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks)); return 0; } -- cgit v1.2.3 From 6985a5ad0d719d8c8d584a69f6e5d7138a2e19ab Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Nov 2009 10:32:41 +0000 Subject: ARM: PNX4008: convert to clkdev Acked-by: Vitaly Wool Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-pnx4008/clock.c | 66 +++++++++++++++-------------- arch/arm/mach-pnx4008/clock.h | 2 - arch/arm/mach-pnx4008/include/mach/clkdev.h | 7 +++ 4 files changed, 43 insertions(+), 33 deletions(-) create mode 100644 arch/arm/mach-pnx4008/include/mach/clkdev.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4c33ca82f9b1..fb2a51b0ec15 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -554,6 +554,7 @@ config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" select CPU_ARM926T select HAVE_CLK + select COMMON_CLKDEV help This enables support for Philips PNX4008 mobile platform. diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c index 898c0e88acbc..6f5d2e502654 100644 --- a/arch/arm/mach-pnx4008/clock.c +++ b/arch/arm/mach-pnx4008/clock.c @@ -22,8 +22,9 @@ #include #include -#include +#include +#include #include #include "clock.h" @@ -747,7 +748,7 @@ static struct clk wdt_ck = { /* These clocks are visible outside this module * and can be initialized */ -static struct clk *onchip_clks[] = { +static struct clk *onchip_clks[] __initdata = { &ck_13MHz, &ck_pll1, &ck_pll4, @@ -777,6 +778,36 @@ static struct clk *onchip_clks[] = { &wdt_ck, }; +static struct clk_lookup onchip_clkreg[] = { + { .clk = &ck_13MHz, .con_id = "ck_13MHz" }, + { .clk = &ck_pll1, .con_id = "ck_pll1" }, + { .clk = &ck_pll4, .con_id = "ck_pll4" }, + { .clk = &ck_pll5, .con_id = "ck_pll5" }, + { .clk = &ck_pll3, .con_id = "ck_pll3" }, + { .clk = &vfp9_ck, .con_id = "vfp9_ck" }, + { .clk = &m2hclk_ck, .con_id = "m2hclk_ck" }, + { .clk = &hclk_ck, .con_id = "hclk_ck" }, + { .clk = &dma_ck, .con_id = "dma_ck" }, + { .clk = &flash_ck, .con_id = "flash_ck" }, + { .clk = &dum_ck, .con_id = "dum_ck" }, + { .clk = &keyscan_ck, .con_id = "keyscan_ck" }, + { .clk = &pwm1_ck, .con_id = "pwm1_ck" }, + { .clk = &pwm2_ck, .con_id = "pwm2_ck" }, + { .clk = &jpeg_ck, .con_id = "jpeg_ck" }, + { .clk = &ms_ck, .con_id = "ms_ck" }, + { .clk = &touch_ck, .con_id = "touch_ck" }, + { .clk = &i2c0_ck, .con_id = "i2c0_ck" }, + { .clk = &i2c1_ck, .con_id = "i2c1_ck" }, + { .clk = &i2c2_ck, .con_id = "i2c2_ck" }, + { .clk = &spi0_ck, .con_id = "spi0_ck" }, + { .clk = &spi1_ck, .con_id = "spi1_ck" }, + { .clk = &uart3_ck, .con_id = "uart3_ck" }, + { .clk = &uart4_ck, .con_id = "uart4_ck" }, + { .clk = &uart5_ck, .con_id = "uart5_ck" }, + { .clk = &uart6_ck, .con_id = "uart6_ck" }, + { .clk = &wdt_ck, .con_id = "wdt_ck" }, +}; + static int local_clk_enable(struct clk *clk) { int ret = 0; @@ -866,35 +897,6 @@ out: EXPORT_SYMBOL(clk_set_rate); -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *clk = ERR_PTR(-ENOENT); - struct clk **clkp; - - clock_lock(); - for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks); - clkp++) { - if (strcmp(id, (*clkp)->name) == 0 - && try_module_get((*clkp)->owner)) { - clk = (*clkp); - break; - } - } - clock_unlock(); - - return clk; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ - clock_lock(); - if (clk && !IS_ERR(clk)) - module_put(clk->owner); - clock_unlock(); -} -EXPORT_SYMBOL(clk_put); - unsigned long clk_get_rate(struct clk *clk) { unsigned long ret; @@ -987,6 +989,8 @@ static int __init clk_init(void) /* Disable autoclocking */ __raw_writeb(0xff, AUTOCLK_CTRL); + clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg)); + return 0; } diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h index cd58f372cfd0..933e18133b96 100644 --- a/arch/arm/mach-pnx4008/clock.h +++ b/arch/arm/mach-pnx4008/clock.h @@ -14,8 +14,6 @@ #define __ARCH_ARM_PNX4008_CLOCK_H__ struct clk { - struct list_head node; - struct module *owner; const char *name; struct clk *parent; struct clk *propagate_next; diff --git a/arch/arm/mach-pnx4008/include/mach/clkdev.h b/arch/arm/mach-pnx4008/include/mach/clkdev.h new file mode 100644 index 000000000000..04b37a89801c --- /dev/null +++ b/arch/arm/mach-pnx4008/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif -- cgit v1.2.3 From 5413f7464e976e2c2ddb20686fc2e66ae8795b6e Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Nov 2009 11:25:44 +0000 Subject: ARM: PNX4008: simplify clk enable/disable paths Acked-by: Vitaly Wool Signed-off-by: Russell King --- arch/arm/mach-pnx4008/clock.c | 55 ++++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 32 deletions(-) diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c index 6f5d2e502654..f0cc91909090 100644 --- a/arch/arm/mach-pnx4008/clock.c +++ b/arch/arm/mach-pnx4008/clock.c @@ -808,49 +808,40 @@ static struct clk_lookup onchip_clkreg[] = { { .clk = &wdt_ck, .con_id = "wdt_ck" }, }; -static int local_clk_enable(struct clk *clk) -{ - int ret = 0; - - if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate - && clk->user_rate) - ret = clk->set_rate(clk, clk->user_rate); - return ret; -} - static void local_clk_disable(struct clk *clk) { - if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate) - clk->set_rate(clk, 0); -} + if (WARN_ON(clk->usecount == 0)) + return; -static void local_clk_unuse(struct clk *clk) -{ - if (clk->usecount > 0 && !(--clk->usecount)) { - local_clk_disable(clk); + if (!(--clk->usecount)) { + if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate) + clk->set_rate(clk, 0); if (clk->parent) - local_clk_unuse(clk->parent); + local_clk_disable(clk->parent); } } -static int local_clk_use(struct clk *clk) +static int local_clk_enable(struct clk *clk) { int ret = 0; - if (clk->usecount++ == 0) { - if (clk->parent) - ret = local_clk_use(clk->parent); - if (ret != 0) { - clk->usecount--; - goto out; + if (clk->usecount == 0) { + if (clk->parent) { + ret = local_clk_enable(clk->parent); + if (ret != 0) + goto out; } - ret = local_clk_enable(clk); + if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate + && clk->user_rate) + ret = clk->set_rate(clk, clk->user_rate); if (ret != 0 && clk->parent) { - local_clk_unuse(clk->parent); - clk->usecount--; + local_clk_disable(clk->parent); + goto out; } + + clk->usecount++; } out: return ret; @@ -909,10 +900,10 @@ EXPORT_SYMBOL(clk_get_rate); int clk_enable(struct clk *clk) { - int ret = 0; + int ret; clock_lock(); - ret = local_clk_use(clk); + ret = local_clk_enable(clk); clock_unlock(); return ret; } @@ -922,7 +913,7 @@ EXPORT_SYMBOL(clk_enable); void clk_disable(struct clk *clk) { clock_lock(); - local_clk_unuse(clk); + local_clk_disable(clk); clock_unlock(); } @@ -980,7 +971,7 @@ static int __init clk_init(void) __func__, (*clkp)->name, (*clkp)->rate); } - local_clk_use(&ck_pll4); + local_clk_enable(&ck_pll4); /* if ck_13MHz is not used, disable it. */ if (ck_13MHz.usecount == 0) -- cgit v1.2.3 From 0c452df9f08d4f0b829802cec3501d987390ada2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Nov 2009 11:28:59 +0000 Subject: ARM: PNX4008: provide clock enable/disable methods and initialization Acked-by: Vitaly Wool Signed-off-by: Russell King --- arch/arm/mach-pnx4008/clock.c | 35 +++++++++++++++++++++++------------ arch/arm/mach-pnx4008/clock.h | 4 +++- 2 files changed, 26 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c index f0cc91909090..3ad694e15968 100644 --- a/arch/arm/mach-pnx4008/clock.c +++ b/arch/arm/mach-pnx4008/clock.c @@ -57,18 +57,19 @@ static void propagate_rate(struct clk *clk) } } -static inline void clk_reg_disable(struct clk *clk) +static void clk_reg_disable(struct clk *clk) { if (clk->enable_reg) __raw_writel(__raw_readl(clk->enable_reg) & ~(1 << clk->enable_shift), clk->enable_reg); } -static inline void clk_reg_enable(struct clk *clk) +static int clk_reg_enable(struct clk *clk) { if (clk->enable_reg) __raw_writel(__raw_readl(clk->enable_reg) | (1 << clk->enable_shift), clk->enable_reg); + return 0; } static inline void clk_reg_disable1(struct clk *clk) @@ -814,7 +815,9 @@ static void local_clk_disable(struct clk *clk) return; if (!(--clk->usecount)) { - if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate) + if (clk->disable) + clk->disable(clk); + else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate) clk->set_rate(clk, 0); if (clk->parent) local_clk_disable(clk->parent); @@ -832,8 +835,10 @@ static int local_clk_enable(struct clk *clk) goto out; } - if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate - && clk->user_rate) + if (clk->enable) + ret = clk->enable(clk); + else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate + && clk->user_rate) ret = clk->set_rate(clk, clk->user_rate); if (ret != 0 && clk->parent) { @@ -960,15 +965,21 @@ static int __init clk_init(void) for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks); clkp++) { - if (((*clkp)->flags & NEEDS_INITIALIZATION) - && ((*clkp)->set_rate)) { - (*clkp)->user_rate = (*clkp)->rate; - local_set_rate((*clkp), (*clkp)->user_rate); - if ((*clkp)->set_parent) - (*clkp)->set_parent((*clkp), (*clkp)->parent); + struct clk *clk = *clkp; + if (clk->flags & NEEDS_INITIALIZATION) { + if (clk->set_rate) { + clk->user_rate = clk->rate; + local_set_rate(clk, clk->user_rate); + if (clk->set_parent) + clk->set_parent(clk, clk->parent); + } + if (clk->enable && clk->usecount) + clk->enable(clk); + if (clk->disable && !clk->usecount) + clk->disable(clk); } pr_debug("%s: clock %s, rate %ld\n", - __func__, (*clkp)->name, (*clkp)->rate); + __func__, clk->name, clk->rate); } local_clk_enable(&ck_pll4); diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h index 933e18133b96..39720d6c0d01 100644 --- a/arch/arm/mach-pnx4008/clock.h +++ b/arch/arm/mach-pnx4008/clock.h @@ -27,9 +27,11 @@ struct clk { u8 enable_shift1; u32 enable_reg1; u32 parent_switch_reg; - u32(*round_rate) (struct clk *, u32); + u32(*round_rate) (struct clk *, u32); int (*set_rate) (struct clk *, u32); int (*set_parent) (struct clk * clk, struct clk * parent); + int (*enable)(struct clk *); + void (*disable)(struct clk *); }; /* Flags */ -- cgit v1.2.3 From 9bb787f435c86ffed079b66efa3ef6a8c577568c Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Nov 2009 13:07:28 +0000 Subject: ARM: PNX4008: convert watchdog clocks to match by device only Acked-by: Wim Van Sebroeck Acked-by: Vitaly Wool Signed-off-by: Russell King --- arch/arm/mach-pnx4008/clock.c | 2 +- drivers/watchdog/pnx4008_wdt.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c index 3ad694e15968..e5140237fb15 100644 --- a/arch/arm/mach-pnx4008/clock.c +++ b/arch/arm/mach-pnx4008/clock.c @@ -806,7 +806,7 @@ static struct clk_lookup onchip_clkreg[] = { { .clk = &uart4_ck, .con_id = "uart4_ck" }, { .clk = &uart5_ck, .con_id = "uart5_ck" }, { .clk = &uart6_ck, .con_id = "uart6_ck" }, - { .clk = &wdt_ck, .con_id = "wdt_ck" }, + { .clk = &wdt_ck, .dev_id = "pnx4008-watchdog" }, }; static void local_clk_disable(struct clk *clk) diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 430a5848a9a5..8c5367fc4e50 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -273,7 +273,7 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev) } wdt_base = (void __iomem *)IO_ADDRESS(res->start); - wdt_clk = clk_get(&pdev->dev, "wdt_ck"); + wdt_clk = clk_get(&pdev->dev, NULL); if (IS_ERR(wdt_clk)) { ret = PTR_ERR(wdt_clk); release_resource(wdt_mem); -- cgit v1.2.3 From 24fd1edaac79fe9554c557f9f93b3197c136c236 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Nov 2009 13:04:14 +0000 Subject: ARM: PNX4008: convert watchdog to use clk API enable/disable calls clk_set_rate() is not supposed to be used to turn clocks on and off. That's what clk_enable/clk_disable is for. Acked-by: Wim Van Sebroeck Acked-by: Vitaly Wool Signed-off-by: Russell King --- arch/arm/mach-pnx4008/clock.c | 4 ++-- drivers/watchdog/pnx4008_wdt.c | 37 ++++++++++++++++++++++++------------- 2 files changed, 26 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c index e5140237fb15..944ffa94d325 100644 --- a/arch/arm/mach-pnx4008/clock.c +++ b/arch/arm/mach-pnx4008/clock.c @@ -740,10 +740,10 @@ static struct clk wdt_ck = { .name = "wdt_ck", .parent = &per_ck, .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, .enable_shift = 0, .enable_reg = TIMCLKCTRL_REG, + .enable = clk_reg_enable, + .disable = clk_reg_disable, }; /* These clocks are visible outside this module diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 8c5367fc4e50..c7a9479934af 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -96,9 +96,6 @@ static void wdt_enable(void) { spin_lock(&io_lock); - if (wdt_clk) - clk_set_rate(wdt_clk, 1); - /* stop counter, initiate counter reset */ __raw_writel(RESET_COUNT, WDTIM_CTRL(wdt_base)); /*wait for reset to complete. 100% guarantee event */ @@ -125,19 +122,25 @@ static void wdt_disable(void) spin_lock(&io_lock); __raw_writel(0, WDTIM_CTRL(wdt_base)); /*stop counter */ - if (wdt_clk) - clk_set_rate(wdt_clk, 0); spin_unlock(&io_lock); } static int pnx4008_wdt_open(struct inode *inode, struct file *file) { + int ret; + if (test_and_set_bit(WDT_IN_USE, &wdt_status)) return -EBUSY; clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + ret = clk_enable(wdt_clk); + if (ret) { + clear_bit(WDT_IN_USE, &wdt_status); + return ret; + } + wdt_enable(); return nonseekable_open(inode, file); @@ -225,6 +228,7 @@ static int pnx4008_wdt_release(struct inode *inode, struct file *file) printk(KERN_WARNING "WATCHDOG: Device closed unexpectdly\n"); wdt_disable(); + clk_disable(wdt_clk); clear_bit(WDT_IN_USE, &wdt_status); clear_bit(WDT_OK_TO_CLOSE, &wdt_status); @@ -279,19 +283,27 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev) release_resource(wdt_mem); kfree(wdt_mem); goto out; - } else - clk_set_rate(wdt_clk, 1); + } + + ret = clk_enable(wdt_clk); + if (ret) { + release_resource(wdt_mem); + kfree(wdt_mem); + goto out; + } ret = misc_register(&pnx4008_wdt_miscdev); if (ret < 0) { printk(KERN_ERR MODULE_NAME "cannot register misc device\n"); release_resource(wdt_mem); kfree(wdt_mem); - clk_set_rate(wdt_clk, 0); + clk_disable(wdt_clk); + clk_put(wdt_clk); } else { boot_status = (__raw_readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ? WDIOF_CARDRESET : 0; wdt_disable(); /*disable for now */ + clk_disable(wdt_clk); set_bit(WDT_DEVICE_INITED, &wdt_status); } @@ -302,11 +314,10 @@ out: static int __devexit pnx4008_wdt_remove(struct platform_device *pdev) { misc_deregister(&pnx4008_wdt_miscdev); - if (wdt_clk) { - clk_set_rate(wdt_clk, 0); - clk_put(wdt_clk); - wdt_clk = NULL; - } + + clk_disable(wdt_clk); + clk_put(wdt_clk); + if (wdt_mem) { release_resource(wdt_mem); kfree(wdt_mem); -- cgit v1.2.3 From bba2be480b981bc1e7bea24c2a2552b0ad7e9774 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Nov 2009 10:46:24 +0000 Subject: ARM: PNX4008: convert i2c clocks to match by device only Acked-by: Vitaly Wool Signed-off-by: Russell King --- arch/arm/mach-pnx4008/clock.c | 6 +++--- arch/arm/mach-pnx4008/i2c.c | 8 ++------ 2 files changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c index 944ffa94d325..5a1515210969 100644 --- a/arch/arm/mach-pnx4008/clock.c +++ b/arch/arm/mach-pnx4008/clock.c @@ -797,9 +797,9 @@ static struct clk_lookup onchip_clkreg[] = { { .clk = &jpeg_ck, .con_id = "jpeg_ck" }, { .clk = &ms_ck, .con_id = "ms_ck" }, { .clk = &touch_ck, .con_id = "touch_ck" }, - { .clk = &i2c0_ck, .con_id = "i2c0_ck" }, - { .clk = &i2c1_ck, .con_id = "i2c1_ck" }, - { .clk = &i2c2_ck, .con_id = "i2c2_ck" }, + { .clk = &i2c0_ck, .dev_id = "pnx-i2c.0" }, + { .clk = &i2c1_ck, .dev_id = "pnx-i2c.1" }, + { .clk = &i2c2_ck, .dev_id = "pnx-i2c.2" }, { .clk = &spi0_ck, .con_id = "spi0_ck" }, { .clk = &spi1_ck, .con_id = "spi1_ck" }, { .clk = &uart3_ck, .con_id = "uart3_ck" }, diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c index f3fea29c00d3..c986b3a61311 100644 --- a/arch/arm/mach-pnx4008/i2c.c +++ b/arch/arm/mach-pnx4008/i2c.c @@ -21,11 +21,9 @@ static int set_clock_run(struct platform_device *pdev) { struct clk *clk; - char name[10]; int retval = 0; - snprintf(name, 10, "i2c%d_ck", pdev->id); - clk = clk_get(&pdev->dev, name); + clk = clk_get(&pdev->dev, NULL); if (!IS_ERR(clk)) { clk_set_rate(clk, 1); clk_put(clk); @@ -38,11 +36,9 @@ static int set_clock_run(struct platform_device *pdev) static int set_clock_stop(struct platform_device *pdev) { struct clk *clk; - char name[10]; int retval = 0; - snprintf(name, 10, "i2c%d_ck", pdev->id); - clk = clk_get(&pdev->dev, name); + clk = clk_get(&pdev->dev, NULL); if (!IS_ERR(clk)) { clk_set_rate(clk, 0); clk_put(clk); -- cgit v1.2.3 From a0dcf19f59d4f37150a6b7e115925d72aca15293 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Nov 2009 10:50:34 +0000 Subject: ARM: PNX4008: move i2c suspend/resume callbacks into driver Acked-by: Vitaly Wool Signed-off-by: Russell King --- arch/arm/mach-pnx4008/i2c.c | 24 ------------------------ drivers/i2c/busses/i2c-pnx.c | 9 +++++++-- include/linux/i2c-pnx.h | 4 ---- 3 files changed, 7 insertions(+), 30 deletions(-) diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c index c986b3a61311..707d819f1280 100644 --- a/arch/arm/mach-pnx4008/i2c.c +++ b/arch/arm/mach-pnx4008/i2c.c @@ -48,24 +48,6 @@ static int set_clock_stop(struct platform_device *pdev) return retval; } -static int i2c_pnx_suspend(struct platform_device *pdev, pm_message_t state) -{ - int retval = 0; -#ifdef CONFIG_PM - retval = set_clock_run(pdev); -#endif - return retval; -} - -static int i2c_pnx_resume(struct platform_device *pdev) -{ - int retval = 0; -#ifdef CONFIG_PM - retval = set_clock_run(pdev); -#endif - return retval; -} - static u32 calculate_input_freq(struct platform_device *pdev) { return HCLK_MHZ; @@ -102,8 +84,6 @@ static struct i2c_adapter pnx_adapter2 = { }; static struct i2c_pnx_data i2c0_data = { - .suspend = i2c_pnx_suspend, - .resume = i2c_pnx_resume, .calculate_input_freq = calculate_input_freq, .set_clock_run = set_clock_run, .set_clock_stop = set_clock_stop, @@ -111,8 +91,6 @@ static struct i2c_pnx_data i2c0_data = { }; static struct i2c_pnx_data i2c1_data = { - .suspend = i2c_pnx_suspend, - .resume = i2c_pnx_resume, .calculate_input_freq = calculate_input_freq, .set_clock_run = set_clock_run, .set_clock_stop = set_clock_stop, @@ -120,8 +98,6 @@ static struct i2c_pnx_data i2c1_data = { }; static struct i2c_pnx_data i2c2_data = { - .suspend = i2c_pnx_suspend, - .resume = i2c_pnx_resume, .calculate_input_freq = calculate_input_freq, .set_clock_run = set_clock_run, .set_clock_stop = set_clock_stop, diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 5d1c2603a130..bc8075514e53 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -545,18 +545,23 @@ static struct i2c_algorithm pnx_algorithm = { .functionality = i2c_pnx_func, }; +#ifdef CONFIG_PM static int i2c_pnx_controller_suspend(struct platform_device *pdev, pm_message_t state) { struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); - return i2c_pnx->suspend(pdev, state); + return i2c_pnx->set_clock_run(pdev); } static int i2c_pnx_controller_resume(struct platform_device *pdev) { struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); - return i2c_pnx->resume(pdev); + return i2c_pnx->set_clock_run(pdev); } +#else +#define i2c_pnx_controller_suspend NULL +#define i2c_pnx_controller_resume NULL +#endif static int __devinit i2c_pnx_probe(struct platform_device *pdev) { diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h index 9eb07bbc6522..71de7f976adf 100644 --- a/include/linux/i2c-pnx.h +++ b/include/linux/i2c-pnx.h @@ -12,8 +12,6 @@ #ifndef __I2C_PNX_H__ #define __I2C_PNX_H__ -#include - struct platform_device; struct i2c_pnx_mif { @@ -34,8 +32,6 @@ struct i2c_pnx_algo_data { }; struct i2c_pnx_data { - int (*suspend) (struct platform_device *pdev, pm_message_t state); - int (*resume) (struct platform_device *pdev); u32 (*calculate_input_freq) (struct platform_device *pdev); int (*set_clock_run) (struct platform_device *pdev); int (*set_clock_stop) (struct platform_device *pdev); -- cgit v1.2.3 From 0321cb83e1c3f3a4282bd620c6cec78c5b80b572 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Nov 2009 11:12:26 +0000 Subject: ARM: PNX4008: move i2c clock start/stop into driver Acked-by: Vitaly Wool Signed-off-by: Russell King --- arch/arm/mach-pnx4008/i2c.c | 36 ------------------------------------ drivers/i2c/busses/i2c-pnx.c | 39 ++++++++++++++++++++++++++++++--------- include/linux/i2c-pnx.h | 4 ++-- 3 files changed, 32 insertions(+), 47 deletions(-) diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c index 707d819f1280..14b4906bec2f 100644 --- a/arch/arm/mach-pnx4008/i2c.c +++ b/arch/arm/mach-pnx4008/i2c.c @@ -18,36 +18,6 @@ #include #include -static int set_clock_run(struct platform_device *pdev) -{ - struct clk *clk; - int retval = 0; - - clk = clk_get(&pdev->dev, NULL); - if (!IS_ERR(clk)) { - clk_set_rate(clk, 1); - clk_put(clk); - } else - retval = -ENOENT; - - return retval; -} - -static int set_clock_stop(struct platform_device *pdev) -{ - struct clk *clk; - int retval = 0; - - clk = clk_get(&pdev->dev, NULL); - if (!IS_ERR(clk)) { - clk_set_rate(clk, 0); - clk_put(clk); - } else - retval = -ENOENT; - - return retval; -} - static u32 calculate_input_freq(struct platform_device *pdev) { return HCLK_MHZ; @@ -85,22 +55,16 @@ static struct i2c_adapter pnx_adapter2 = { static struct i2c_pnx_data i2c0_data = { .calculate_input_freq = calculate_input_freq, - .set_clock_run = set_clock_run, - .set_clock_stop = set_clock_stop, .adapter = &pnx_adapter0, }; static struct i2c_pnx_data i2c1_data = { .calculate_input_freq = calculate_input_freq, - .set_clock_run = set_clock_run, - .set_clock_stop = set_clock_stop, .adapter = &pnx_adapter1, }; static struct i2c_pnx_data i2c2_data = { .calculate_input_freq = calculate_input_freq, - .set_clock_run = set_clock_run, - .set_clock_stop = set_clock_stop, .adapter = &pnx_adapter2, }; diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index bc8075514e53..98462671cdf7 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -20,6 +20,9 @@ #include #include #include +#include +#include + #include #include #include @@ -550,13 +553,22 @@ static int i2c_pnx_controller_suspend(struct platform_device *pdev, pm_message_t state) { struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); - return i2c_pnx->set_clock_run(pdev); + struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data; + + /* FIXME: disable clock? */ + clk_set_rate(alg_data->clk, 1); + + return 0; } static int i2c_pnx_controller_resume(struct platform_device *pdev) { struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); - return i2c_pnx->set_clock_run(pdev); + struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data; + + clk_set_rate(alg_data->clk, 1); + + return 0; } #else #define i2c_pnx_controller_suspend NULL @@ -580,6 +592,15 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c_pnx); + i2c_pnx->adapter->algo = &pnx_algorithm; + alg_data = i2c_pnx->adapter->algo_data; + + alg_data->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(alg_data->clk)) { + ret = PTR_ERR(alg_data->clk); + goto out_drvdata; + } + if (i2c_pnx->calculate_input_freq) freq_mhz = i2c_pnx->calculate_input_freq(pdev); else { @@ -588,9 +609,6 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) "%d MHz\n", freq_mhz); } - i2c_pnx->adapter->algo = &pnx_algorithm; - - alg_data = i2c_pnx->adapter->algo_data; init_timer(&alg_data->mif.timer); alg_data->mif.timer.function = i2c_pnx_timeout; alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter; @@ -602,7 +620,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) "I/O region 0x%08x for I2C already in use.\n", alg_data->base); ret = -ENODEV; - goto out_drvdata; + goto out_clkget; } if (!(alg_data->ioaddr = @@ -612,7 +630,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) goto out_release; } - i2c_pnx->set_clock_run(pdev); + clk_set_rate(alg_data->clk, 1); /* * Clock Divisor High This value is the number of system clocks @@ -658,11 +676,13 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) out_irq: free_irq(alg_data->irq, i2c_pnx->adapter); out_clock: - i2c_pnx->set_clock_stop(pdev); + clk_set_rate(alg_data->clk, 0); out_unmap: iounmap((void *)alg_data->ioaddr); out_release: release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE); +out_clkget: + clk_put(alg_data->clk); out_drvdata: platform_set_drvdata(pdev, NULL); out: @@ -677,9 +697,10 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev) free_irq(alg_data->irq, i2c_pnx->adapter); i2c_del_adapter(adap); - i2c_pnx->set_clock_stop(pdev); + clk_set_rate(alg_data->clk, 0); iounmap((void *)alg_data->ioaddr); release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE); + clk_put(alg_data->clk); platform_set_drvdata(pdev, NULL); return 0; diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h index 71de7f976adf..688e29262a43 100644 --- a/include/linux/i2c-pnx.h +++ b/include/linux/i2c-pnx.h @@ -13,6 +13,7 @@ #define __I2C_PNX_H__ struct platform_device; +struct clk; struct i2c_pnx_mif { int ret; /* Return value */ @@ -29,12 +30,11 @@ struct i2c_pnx_algo_data { int irq; struct i2c_pnx_mif mif; int last; + struct clk *clk; }; struct i2c_pnx_data { u32 (*calculate_input_freq) (struct platform_device *pdev); - int (*set_clock_run) (struct platform_device *pdev); - int (*set_clock_stop) (struct platform_device *pdev); struct i2c_adapter *adapter; }; -- cgit v1.2.3 From ebdbbf2003ae2342147c87c2a6c6ed8984b9cede Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Nov 2009 11:44:46 +0000 Subject: ARM: PNX4008: convert i2c-pnx to use clk API enable/disable calls clk_set_rate() is not supposed to be used to turn clocks on and off. That's what clk_enable/clk_disable is for. Acked-by: Vitaly Wool Signed-off-by: Russell King --- arch/arm/mach-pnx4008/clock.c | 12 ++++++------ drivers/i2c/busses/i2c-pnx.c | 18 +++++++++--------- 2 files changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c index 5a1515210969..692625cd2001 100644 --- a/arch/arm/mach-pnx4008/clock.c +++ b/arch/arm/mach-pnx4008/clock.c @@ -639,30 +639,30 @@ static struct clk i2c0_ck = { .name = "i2c0_ck", .parent = &per_ck, .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, .enable_shift = 0, .enable_reg = I2CCLKCTRL_REG, + .enable = clk_reg_enable, + .disable = clk_reg_disable, }; static struct clk i2c1_ck = { .name = "i2c1_ck", .parent = &per_ck, .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, .enable_shift = 1, .enable_reg = I2CCLKCTRL_REG, + .enable = clk_reg_enable, + .disable = clk_reg_disable, }; static struct clk i2c2_ck = { .name = "i2c2_ck", .parent = &per_ck, .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, .enable_shift = 2, .enable_reg = USB_OTG_CLKCTRL_REG, + .enable = clk_reg_enable, + .disable = clk_reg_disable, }; static struct clk spi0_ck = { diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 98462671cdf7..29f91774c4df 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -555,8 +555,8 @@ static int i2c_pnx_controller_suspend(struct platform_device *pdev, struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data; - /* FIXME: disable clock? */ - clk_set_rate(alg_data->clk, 1); + /* FIXME: shouldn't this be clk_disable? */ + clk_enable(alg_data->clk); return 0; } @@ -566,9 +566,7 @@ static int i2c_pnx_controller_resume(struct platform_device *pdev) struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data; - clk_set_rate(alg_data->clk, 1); - - return 0; + return clk_enable(alg_data->clk); } #else #define i2c_pnx_controller_suspend NULL @@ -630,7 +628,9 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) goto out_release; } - clk_set_rate(alg_data->clk, 1); + ret = clk_enable(alg_data->clk); + if (ret) + goto out_unmap; /* * Clock Divisor High This value is the number of system clocks @@ -650,7 +650,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data)); if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) { ret = -ENODEV; - goto out_unmap; + goto out_clock; } init_completion(&alg_data->mif.complete); @@ -676,7 +676,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) out_irq: free_irq(alg_data->irq, i2c_pnx->adapter); out_clock: - clk_set_rate(alg_data->clk, 0); + clk_disable(alg_data->clk); out_unmap: iounmap((void *)alg_data->ioaddr); out_release: @@ -697,7 +697,7 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev) free_irq(alg_data->irq, i2c_pnx->adapter); i2c_del_adapter(adap); - clk_set_rate(alg_data->clk, 0); + clk_disable(alg_data->clk); iounmap((void *)alg_data->ioaddr); release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE); clk_put(alg_data->clk); -- cgit v1.2.3 From 6fff3da998ac3cc9ed8a84bf4f19911bd63c8c32 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Nov 2009 12:46:07 +0000 Subject: ARM: PNX4008: get i2c clock rate from clk API Acked-by: Vitaly Wool Signed-off-by: Russell King --- arch/arm/mach-pnx4008/clock.c | 9 ++++++--- arch/arm/mach-pnx4008/i2c.c | 9 --------- drivers/i2c/busses/i2c-pnx.c | 15 ++++----------- include/linux/i2c-pnx.h | 1 - 4 files changed, 10 insertions(+), 24 deletions(-) diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c index 692625cd2001..9d1975fa4d9f 100644 --- a/arch/arm/mach-pnx4008/clock.c +++ b/arch/arm/mach-pnx4008/clock.c @@ -638,9 +638,10 @@ static struct clk flash_ck = { static struct clk i2c0_ck = { .name = "i2c0_ck", .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, + .flags = NEEDS_INITIALIZATION | FIXED_RATE, .enable_shift = 0, .enable_reg = I2CCLKCTRL_REG, + .rate = 13000000, .enable = clk_reg_enable, .disable = clk_reg_disable, }; @@ -648,9 +649,10 @@ static struct clk i2c0_ck = { static struct clk i2c1_ck = { .name = "i2c1_ck", .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, + .flags = NEEDS_INITIALIZATION | FIXED_RATE, .enable_shift = 1, .enable_reg = I2CCLKCTRL_REG, + .rate = 13000000, .enable = clk_reg_enable, .disable = clk_reg_disable, }; @@ -658,9 +660,10 @@ static struct clk i2c1_ck = { static struct clk i2c2_ck = { .name = "i2c2_ck", .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, + .flags = NEEDS_INITIALIZATION | FIXED_RATE, .enable_shift = 2, .enable_reg = USB_OTG_CLKCTRL_REG, + .rate = 13000000, .enable = clk_reg_enable, .disable = clk_reg_disable, }; diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c index 14b4906bec2f..23ec335a4bc0 100644 --- a/arch/arm/mach-pnx4008/i2c.c +++ b/arch/arm/mach-pnx4008/i2c.c @@ -18,12 +18,6 @@ #include #include -static u32 calculate_input_freq(struct platform_device *pdev) -{ - return HCLK_MHZ; -} - - static struct i2c_pnx_algo_data pnx_algo_data0 = { .base = PNX4008_I2C1_BASE, .irq = I2C_1_INT, @@ -54,17 +48,14 @@ static struct i2c_adapter pnx_adapter2 = { }; static struct i2c_pnx_data i2c0_data = { - .calculate_input_freq = calculate_input_freq, .adapter = &pnx_adapter0, }; static struct i2c_pnx_data i2c1_data = { - .calculate_input_freq = calculate_input_freq, .adapter = &pnx_adapter1, }; static struct i2c_pnx_data i2c2_data = { - .calculate_input_freq = calculate_input_freq, .adapter = &pnx_adapter2, }; diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 29f91774c4df..bfcd079e885c 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -31,7 +31,6 @@ #define I2C_PNX_TIMEOUT 10 /* msec */ #define I2C_PNX_SPEED_KHZ 100 #define I2C_PNX_REGION_SIZE 0x100 -#define PNX_DEFAULT_FREQ 13 /* MHz */ static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data) { @@ -578,7 +577,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) unsigned long tmp; int ret = 0; struct i2c_pnx_algo_data *alg_data; - int freq_mhz; + unsigned long freq; struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data; if (!i2c_pnx || !i2c_pnx->adapter) { @@ -599,14 +598,6 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) goto out_drvdata; } - if (i2c_pnx->calculate_input_freq) - freq_mhz = i2c_pnx->calculate_input_freq(pdev); - else { - freq_mhz = PNX_DEFAULT_FREQ; - dev_info(&pdev->dev, "Setting bus frequency to default value: " - "%d MHz\n", freq_mhz); - } - init_timer(&alg_data->mif.timer); alg_data->mif.timer.function = i2c_pnx_timeout; alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter; @@ -632,6 +623,8 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) if (ret) goto out_unmap; + freq = clk_get_rate(alg_data->clk); + /* * Clock Divisor High This value is the number of system clocks * the serial clock (SCL) will be high. @@ -643,7 +636,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) * the deglitching filter length. */ - tmp = ((freq_mhz * 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2; + tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2; iowrite32(tmp, I2C_REG_CKH(alg_data)); iowrite32(tmp, I2C_REG_CKL(alg_data)); diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h index 688e29262a43..9035711cb3b1 100644 --- a/include/linux/i2c-pnx.h +++ b/include/linux/i2c-pnx.h @@ -34,7 +34,6 @@ struct i2c_pnx_algo_data { }; struct i2c_pnx_data { - u32 (*calculate_input_freq) (struct platform_device *pdev); struct i2c_adapter *adapter; }; -- cgit v1.2.3 From 2781681ea6629ac0a685f5afe2011f916ab3c8ba Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Nov 2009 11:43:33 +0000 Subject: ARM: PNX4008: remove platform definitions from mach/timex.h mach/timex.h is only supposed to contain a definition for CLOCK_TICK_RATE. Remove additional includes, and move private definitions to a private header file. Signed-off-by: Russell King --- arch/arm/mach-pnx4008/include/mach/timex.h | 54 ----------------------- arch/arm/mach-pnx4008/pm.c | 2 + arch/arm/mach-pnx4008/time.c | 2 + arch/arm/mach-pnx4008/time.h | 70 ++++++++++++++++++++++++++++++ 4 files changed, 74 insertions(+), 54 deletions(-) create mode 100644 arch/arm/mach-pnx4008/time.h diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h index 5ff0196c0f16..b383c7de7ab4 100644 --- a/arch/arm/mach-pnx4008/include/mach/timex.h +++ b/arch/arm/mach-pnx4008/include/mach/timex.h @@ -14,60 +14,6 @@ #ifndef __PNX4008_TIMEX_H #define __PNX4008_TIMEX_H -#include -#include - #define CLOCK_TICK_RATE 1000000 -#define TICKS2USECS(x) (x) - -/* MilliSecond Timer - Chapter 21 Page 202 */ - -#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0)) -#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4)) -#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8)) -#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14)) -#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18)) -#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c)) - -/* High Speed Timer - Chpater 22, Page 205 */ - -#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0)) -#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4)) -#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8)) -#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC)) -#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10)) -#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14)) -#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18)) -#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c)) -#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20)) -#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28)) -#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C)) -#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30)) - -/* IMPORTANT: both timers are UPCOUNTING */ - -/* xSTIM_MCTRL bit definitions */ -#define MR0_INT 1 -#define RESET_COUNT0 (1<<1) -#define STOP_COUNT0 (1<<2) -#define MR1_INT (1<<3) -#define RESET_COUNT1 (1<<4) -#define STOP_COUNT1 (1<<5) -#define MR2_INT (1<<6) -#define RESET_COUNT2 (1<<7) -#define STOP_COUNT2 (1<<8) - -/* xSTIM_CTRL bit definitions */ -#define COUNT_ENAB 1 -#define RESET_COUNT (1<<1) -#define DEBUG_EN (1<<2) - -/* xSTIM_INT bit definitions */ -#define MATCH0_INT 1 -#define MATCH1_INT (1<<1) -#define MATCH2_INT (1<<2) -#define RTC_TICK0 (1<<4) -#define RTC_TICK1 (1<<5) - #endif diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c index b3d8d53e32ef..1f0585329be4 100644 --- a/arch/arm/mach-pnx4008/pm.c +++ b/arch/arm/mach-pnx4008/pm.c @@ -21,6 +21,8 @@ #include #include + +#include #include #include diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c index fc0ba183fe12..0c8aad4bb0dc 100644 --- a/arch/arm/mach-pnx4008/time.c +++ b/arch/arm/mach-pnx4008/time.c @@ -30,6 +30,8 @@ #include #include +#include "time.h" + /*! Note: all timers are UPCOUNTING */ /*! diff --git a/arch/arm/mach-pnx4008/time.h b/arch/arm/mach-pnx4008/time.h new file mode 100644 index 000000000000..75e88c570aa7 --- /dev/null +++ b/arch/arm/mach-pnx4008/time.h @@ -0,0 +1,70 @@ +/* + * arch/arm/mach-pnx4008/include/mach/timex.h + * + * PNX4008 timers header file + * + * Author: Dmitry Chigirev + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef PNX_TIME_H +#define PNX_TIME_H + +#include +#include + +#define TICKS2USECS(x) (x) + +/* MilliSecond Timer - Chapter 21 Page 202 */ + +#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0)) +#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4)) +#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8)) +#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14)) +#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18)) +#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c)) + +/* High Speed Timer - Chpater 22, Page 205 */ + +#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0)) +#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4)) +#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8)) +#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC)) +#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10)) +#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14)) +#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18)) +#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c)) +#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20)) +#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28)) +#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C)) +#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30)) + +/* IMPORTANT: both timers are UPCOUNTING */ + +/* xSTIM_MCTRL bit definitions */ +#define MR0_INT 1 +#define RESET_COUNT0 (1<<1) +#define STOP_COUNT0 (1<<2) +#define MR1_INT (1<<3) +#define RESET_COUNT1 (1<<4) +#define STOP_COUNT1 (1<<5) +#define MR2_INT (1<<6) +#define RESET_COUNT2 (1<<7) +#define STOP_COUNT2 (1<<8) + +/* xSTIM_CTRL bit definitions */ +#define COUNT_ENAB 1 +#define RESET_COUNT (1<<1) +#define DEBUG_EN (1<<2) + +/* xSTIM_INT bit definitions */ +#define MATCH0_INT 1 +#define MATCH1_INT (1<<1) +#define MATCH2_INT (1<<2) +#define RTC_TICK0 (1<<4) +#define RTC_TICK1 (1<<5) + +#endif -- cgit v1.2.3 From 88d968b22fa26d5e3a8cab46fc7c3a21c89a91d3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Nov 2009 11:58:36 +0000 Subject: ARM: PNX4008: Make ioaddr 'void __iomem *' rather than 'u32' This avoids unnecessary casting. Signed-off-by: Russell King --- drivers/i2c/busses/i2c-pnx.c | 8 ++++---- include/linux/i2c-pnx.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index bfcd079e885c..882579e64111 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -612,8 +612,8 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) goto out_clkget; } - if (!(alg_data->ioaddr = - (u32)ioremap(alg_data->base, I2C_PNX_REGION_SIZE))) { + alg_data->ioaddr = ioremap(alg_data->base, I2C_PNX_REGION_SIZE); + if (!alg_data->ioaddr) { dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n"); ret = -ENOMEM; goto out_release; @@ -671,7 +671,7 @@ out_irq: out_clock: clk_disable(alg_data->clk); out_unmap: - iounmap((void *)alg_data->ioaddr); + iounmap(alg_data->ioaddr); out_release: release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE); out_clkget: @@ -691,7 +691,7 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev) free_irq(alg_data->irq, i2c_pnx->adapter); i2c_del_adapter(adap); clk_disable(alg_data->clk); - iounmap((void *)alg_data->ioaddr); + iounmap(alg_data->ioaddr); release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE); clk_put(alg_data->clk); platform_set_drvdata(pdev, NULL); diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h index 9035711cb3b1..5a48f33046fb 100644 --- a/include/linux/i2c-pnx.h +++ b/include/linux/i2c-pnx.h @@ -26,7 +26,7 @@ struct i2c_pnx_mif { struct i2c_pnx_algo_data { u32 base; - u32 ioaddr; + void __iomem *ioaddr; int irq; struct i2c_pnx_mif mif; int last; -- cgit v1.2.3 From 44c5d739181886cff8e3903dfa38cd704f3d9640 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Nov 2009 12:10:54 +0000 Subject: ARM: PNX4008: kzalloc i2c drivers internal data Signed-off-by: Russell King --- arch/arm/mach-pnx4008/i2c.c | 25 +++++++------------------ drivers/i2c/busses/i2c-pnx.c | 29 +++++++++++++++++++---------- include/linux/i2c-pnx.h | 4 ++-- 3 files changed, 28 insertions(+), 30 deletions(-) diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c index 23ec335a4bc0..33146e832dd7 100644 --- a/arch/arm/mach-pnx4008/i2c.c +++ b/arch/arm/mach-pnx4008/i2c.c @@ -18,45 +18,34 @@ #include #include -static struct i2c_pnx_algo_data pnx_algo_data0 = { - .base = PNX4008_I2C1_BASE, - .irq = I2C_1_INT, -}; - -static struct i2c_pnx_algo_data pnx_algo_data1 = { - .base = PNX4008_I2C2_BASE, - .irq = I2C_2_INT, -}; - -static struct i2c_pnx_algo_data pnx_algo_data2 = { - .base = (PNX4008_USB_CONFIG_BASE + 0x300), - .irq = USB_I2C_INT, -}; - static struct i2c_adapter pnx_adapter0 = { .name = I2C_CHIP_NAME "0", - .algo_data = &pnx_algo_data0, }; + static struct i2c_adapter pnx_adapter1 = { .name = I2C_CHIP_NAME "1", - .algo_data = &pnx_algo_data1, }; static struct i2c_adapter pnx_adapter2 = { .name = "USB-I2C", - .algo_data = &pnx_algo_data2, }; static struct i2c_pnx_data i2c0_data = { .adapter = &pnx_adapter0, + .base = PNX4008_I2C1_BASE, + .irq = I2C_1_INT, }; static struct i2c_pnx_data i2c1_data = { .adapter = &pnx_adapter1, + .base = PNX4008_I2C2_BASE, + .irq = I2C_2_INT, }; static struct i2c_pnx_data i2c2_data = { .adapter = &pnx_adapter2, + .base = (PNX4008_USB_CONFIG_BASE + 0x300), + .irq = USB_I2C_INT, }; static struct platform_device i2c0_device = { diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 882579e64111..1d66856a22fd 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -587,10 +587,16 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) goto out; } + alg_data = kzalloc(sizeof(*alg_data), GFP_KERNEL); + if (!alg_data) { + ret = -ENOMEM; + goto err_kzalloc; + } + platform_set_drvdata(pdev, i2c_pnx); i2c_pnx->adapter->algo = &pnx_algorithm; - alg_data = i2c_pnx->adapter->algo_data; + i2c_pnx->adapter->algo_data = alg_data; alg_data->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(alg_data->clk)) { @@ -603,16 +609,16 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter; /* Register I/O resource */ - if (!request_mem_region(alg_data->base, I2C_PNX_REGION_SIZE, + if (!request_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE, pdev->name)) { dev_err(&pdev->dev, "I/O region 0x%08x for I2C already in use.\n", - alg_data->base); + i2c_pnx->base); ret = -ENODEV; goto out_clkget; } - alg_data->ioaddr = ioremap(alg_data->base, I2C_PNX_REGION_SIZE); + alg_data->ioaddr = ioremap(i2c_pnx->base, I2C_PNX_REGION_SIZE); if (!alg_data->ioaddr) { dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n"); ret = -ENOMEM; @@ -647,7 +653,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) } init_completion(&alg_data->mif.complete); - ret = request_irq(alg_data->irq, i2c_pnx_interrupt, + ret = request_irq(i2c_pnx->irq, i2c_pnx_interrupt, 0, pdev->name, i2c_pnx->adapter); if (ret) goto out_clock; @@ -662,21 +668,23 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) } dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n", - i2c_pnx->adapter->name, alg_data->base, alg_data->irq); + i2c_pnx->adapter->name, i2c_pnx->base, i2c_pnx->irq); return 0; out_irq: - free_irq(alg_data->irq, i2c_pnx->adapter); + free_irq(i2c_pnx->irq, i2c_pnx->adapter); out_clock: clk_disable(alg_data->clk); out_unmap: iounmap(alg_data->ioaddr); out_release: - release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE); + release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE); out_clkget: clk_put(alg_data->clk); out_drvdata: + kfree(alg_data); +err_kzalloc: platform_set_drvdata(pdev, NULL); out: return ret; @@ -688,12 +696,13 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev) struct i2c_adapter *adap = i2c_pnx->adapter; struct i2c_pnx_algo_data *alg_data = adap->algo_data; - free_irq(alg_data->irq, i2c_pnx->adapter); + free_irq(i2c_pnx->irq, i2c_pnx->adapter); i2c_del_adapter(adap); clk_disable(alg_data->clk); iounmap(alg_data->ioaddr); - release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE); + release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE); clk_put(alg_data->clk); + kfree(alg_data); platform_set_drvdata(pdev, NULL); return 0; diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h index 5a48f33046fb..9ebdf882d032 100644 --- a/include/linux/i2c-pnx.h +++ b/include/linux/i2c-pnx.h @@ -25,9 +25,7 @@ struct i2c_pnx_mif { }; struct i2c_pnx_algo_data { - u32 base; void __iomem *ioaddr; - int irq; struct i2c_pnx_mif mif; int last; struct clk *clk; @@ -35,6 +33,8 @@ struct i2c_pnx_algo_data { struct i2c_pnx_data { struct i2c_adapter *adapter; + u32 base; + int irq; }; #endif /* __I2C_PNX_H__ */ -- cgit v1.2.3 From 9d7f73632c87ef1b6187eb539d1efd63c3cf0e36 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Nov 2009 12:25:27 +0000 Subject: ARM: PNX4008: move i2c_adapter structure inside the drivers private data Signed-off-by: Russell King --- arch/arm/mach-pnx4008/i2c.c | 18 +++--------------- drivers/i2c/busses/i2c-pnx.c | 40 ++++++++++++++++++++-------------------- include/linux/i2c-pnx.h | 4 +++- 3 files changed, 26 insertions(+), 36 deletions(-) diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c index 33146e832dd7..8103f9644e2d 100644 --- a/arch/arm/mach-pnx4008/i2c.c +++ b/arch/arm/mach-pnx4008/i2c.c @@ -18,32 +18,20 @@ #include #include -static struct i2c_adapter pnx_adapter0 = { - .name = I2C_CHIP_NAME "0", -}; - -static struct i2c_adapter pnx_adapter1 = { - .name = I2C_CHIP_NAME "1", -}; - -static struct i2c_adapter pnx_adapter2 = { - .name = "USB-I2C", -}; - static struct i2c_pnx_data i2c0_data = { - .adapter = &pnx_adapter0, + .name = I2C_CHIP_NAME "0", .base = PNX4008_I2C1_BASE, .irq = I2C_1_INT, }; static struct i2c_pnx_data i2c1_data = { - .adapter = &pnx_adapter1, + .name = I2C_CHIP_NAME "1", .base = PNX4008_I2C2_BASE, .irq = I2C_2_INT, }; static struct i2c_pnx_data i2c2_data = { - .adapter = &pnx_adapter2, + .name = "USB-I2C", .base = (PNX4008_USB_CONFIG_BASE + 0x300), .irq = USB_I2C_INT, }; diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 1d66856a22fd..6b413c5300d3 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -551,8 +551,7 @@ static struct i2c_algorithm pnx_algorithm = { static int i2c_pnx_controller_suspend(struct platform_device *pdev, pm_message_t state) { - struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); - struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data; + struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev); /* FIXME: shouldn't this be clk_disable? */ clk_enable(alg_data->clk); @@ -562,8 +561,7 @@ static int i2c_pnx_controller_suspend(struct platform_device *pdev, static int i2c_pnx_controller_resume(struct platform_device *pdev) { - struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); - struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data; + struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev); return clk_enable(alg_data->clk); } @@ -580,7 +578,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) unsigned long freq; struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data; - if (!i2c_pnx || !i2c_pnx->adapter) { + if (!i2c_pnx || !i2c_pnx->name) { dev_err(&pdev->dev, "%s: no platform data supplied\n", __func__); ret = -EINVAL; @@ -593,10 +591,15 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) goto err_kzalloc; } - platform_set_drvdata(pdev, i2c_pnx); + platform_set_drvdata(pdev, alg_data); - i2c_pnx->adapter->algo = &pnx_algorithm; - i2c_pnx->adapter->algo_data = alg_data; + strlcpy(alg_data->adapter.name, i2c_pnx->name, + sizeof(alg_data->adapter.name)); + alg_data->adapter.dev.parent = &pdev->dev; + alg_data->adapter.algo = &pnx_algorithm; + alg_data->adapter.algo_data = alg_data; + alg_data->adapter.nr = pdev->id; + alg_data->i2c_pnx = i2c_pnx; alg_data->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(alg_data->clk)) { @@ -606,7 +609,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) init_timer(&alg_data->mif.timer); alg_data->mif.timer.function = i2c_pnx_timeout; - alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter; + alg_data->mif.timer.data = (unsigned long)&alg_data->adapter; /* Register I/O resource */ if (!request_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE, @@ -654,26 +657,24 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) init_completion(&alg_data->mif.complete); ret = request_irq(i2c_pnx->irq, i2c_pnx_interrupt, - 0, pdev->name, i2c_pnx->adapter); + 0, pdev->name, &alg_data->adapter); if (ret) goto out_clock; /* Register this adapter with the I2C subsystem */ - i2c_pnx->adapter->dev.parent = &pdev->dev; - i2c_pnx->adapter->nr = pdev->id; - ret = i2c_add_numbered_adapter(i2c_pnx->adapter); + ret = i2c_add_numbered_adapter(&alg_data->adapter); if (ret < 0) { dev_err(&pdev->dev, "I2C: Failed to add bus\n"); goto out_irq; } dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n", - i2c_pnx->adapter->name, i2c_pnx->base, i2c_pnx->irq); + alg_data->adapter.name, i2c_pnx->base, i2c_pnx->irq); return 0; out_irq: - free_irq(i2c_pnx->irq, i2c_pnx->adapter); + free_irq(i2c_pnx->irq, &alg_data->adapter); out_clock: clk_disable(alg_data->clk); out_unmap: @@ -692,12 +693,11 @@ out: static int __devexit i2c_pnx_remove(struct platform_device *pdev) { - struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); - struct i2c_adapter *adap = i2c_pnx->adapter; - struct i2c_pnx_algo_data *alg_data = adap->algo_data; + struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev); + struct i2c_pnx_data *i2c_pnx = alg_data->i2c_pnx; - free_irq(i2c_pnx->irq, i2c_pnx->adapter); - i2c_del_adapter(adap); + free_irq(i2c_pnx->irq, &alg_data->adapter); + i2c_del_adapter(&alg_data->adapter); clk_disable(alg_data->clk); iounmap(alg_data->ioaddr); release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE); diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h index 9ebdf882d032..a87124d4d533 100644 --- a/include/linux/i2c-pnx.h +++ b/include/linux/i2c-pnx.h @@ -29,10 +29,12 @@ struct i2c_pnx_algo_data { struct i2c_pnx_mif mif; int last; struct clk *clk; + struct i2c_pnx_data *i2c_pnx; + struct i2c_adapter adapter; }; struct i2c_pnx_data { - struct i2c_adapter *adapter; + const char *name; u32 base; int irq; }; -- cgit v1.2.3 From 81d6724a564fa5bd20b006eae0da4462d599bb92 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Nov 2009 12:40:00 +0000 Subject: ARM: PNX4008: Use i2c driver data for passing between internal functions Since the drivers data now contains the i2c adapter structure, we can pass around the drivers data between internal functions (which is what they want) rather than using the i2c adapter structure and having an additional pointer dereference each time. Signed-off-by: Russell King --- drivers/i2c/busses/i2c-pnx.c | 132 ++++++++++++++++++++----------------------- 1 file changed, 62 insertions(+), 70 deletions(-) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 6b413c5300d3..181e69211e4f 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -52,10 +52,9 @@ static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data) return (timeout <= 0); } -static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap) +static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data) { - struct i2c_pnx_algo_data *data = adap->algo_data; - struct timer_list *timer = &data->mif.timer; + struct timer_list *timer = &alg_data->mif.timer; int expires = I2C_PNX_TIMEOUT / (1000 / HZ); if (expires <= 1) @@ -63,11 +62,11 @@ static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap) del_timer_sync(timer); - dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n", + dev_dbg(&alg_data->adapter.dev, "Timer armed at %lu plus %u jiffies.\n", jiffies, expires); timer->expires = jiffies + expires; - timer->data = (unsigned long)adap; + timer->data = (unsigned long)&alg_data; add_timer(timer); } @@ -79,34 +78,33 @@ static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap) * * Generate a START signal in the desired mode. */ -static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap) +static int i2c_pnx_start(unsigned char slave_addr, + struct i2c_pnx_algo_data *alg_data) { - struct i2c_pnx_algo_data *alg_data = adap->algo_data; - - dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __func__, + dev_dbg(&alg_data->adapter.dev, "%s(): addr 0x%x mode %d\n", __func__, slave_addr, alg_data->mif.mode); /* Check for 7 bit slave addresses only */ if (slave_addr & ~0x7f) { - dev_err(&adap->dev, "%s: Invalid slave address %x. " + dev_err(&alg_data->adapter.dev, "%s: Invalid slave address %x. " "Only 7-bit addresses are supported\n", - adap->name, slave_addr); + alg_data->adapter.name, slave_addr); return -EINVAL; } /* First, make sure bus is idle */ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) { /* Somebody else is monopolizing the bus */ - dev_err(&adap->dev, "%s: Bus busy. Slave addr = %02x, " + dev_err(&alg_data->adapter.dev, "%s: Bus busy. Slave addr = %02x, " "cntrl = %x, stat = %x\n", - adap->name, slave_addr, + alg_data->adapter.name, slave_addr, ioread32(I2C_REG_CTL(alg_data)), ioread32(I2C_REG_STS(alg_data))); return -EBUSY; } else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) { /* Sorry, we lost the bus */ - dev_err(&adap->dev, "%s: Arbitration failure. " - "Slave addr = %02x\n", adap->name, slave_addr); + dev_err(&alg_data->adapter.dev, "%s: Arbitration failure. " + "Slave addr = %02x\n", alg_data->adapter.name, slave_addr); return -EIO; } @@ -117,14 +115,14 @@ static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap) iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data)); - dev_dbg(&adap->dev, "%s(): sending %#x\n", __func__, + dev_dbg(&alg_data->adapter.dev, "%s(): sending %#x\n", __func__, (slave_addr << 1) | start_bit | alg_data->mif.mode); /* Write the slave address, START bit and R/W bit */ iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode, I2C_REG_TX(alg_data)); - dev_dbg(&adap->dev, "%s(): exit\n", __func__); + dev_dbg(&alg_data->adapter.dev, "%s(): exit\n", __func__); return 0; } @@ -135,13 +133,12 @@ static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap) * * Generate a STOP signal to terminate the master transaction. */ -static void i2c_pnx_stop(struct i2c_adapter *adap) +static void i2c_pnx_stop(struct i2c_pnx_algo_data *alg_data) { - struct i2c_pnx_algo_data *alg_data = adap->algo_data; /* Only 1 msec max timeout due to interrupt context */ long timeout = 1000; - dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n", + dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n", __func__, ioread32(I2C_REG_STS(alg_data))); /* Write a STOP bit to TX FIFO */ @@ -155,7 +152,7 @@ static void i2c_pnx_stop(struct i2c_adapter *adap) timeout--; } - dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n", + dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n", __func__, ioread32(I2C_REG_STS(alg_data))); } @@ -165,12 +162,11 @@ static void i2c_pnx_stop(struct i2c_adapter *adap) * * Sends one byte of data to the slave */ -static int i2c_pnx_master_xmit(struct i2c_adapter *adap) +static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data) { - struct i2c_pnx_algo_data *alg_data = adap->algo_data; u32 val; - dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n", + dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n", __func__, ioread32(I2C_REG_STS(alg_data))); if (alg_data->mif.len > 0) { @@ -186,14 +182,14 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap) alg_data->mif.len--; iowrite32(val, I2C_REG_TX(alg_data)); - dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __func__, + dev_dbg(&alg_data->adapter.dev, "%s(): xmit %#x [%d]\n", __func__, val, alg_data->mif.len + 1); if (alg_data->mif.len == 0) { if (alg_data->last) { /* Wait until the STOP is seen. */ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) - dev_err(&adap->dev, "The bus is still " + dev_err(&alg_data->adapter.dev, "The bus is still " "active after timeout\n"); } /* Disable master interrupts */ @@ -203,14 +199,14 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap) del_timer_sync(&alg_data->mif.timer); - dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n", + dev_dbg(&alg_data->adapter.dev, "%s(): Waking up xfer routine.\n", __func__); complete(&alg_data->mif.complete); } } else if (alg_data->mif.len == 0) { /* zero-sized transfer */ - i2c_pnx_stop(adap); + i2c_pnx_stop(alg_data); /* Disable master interrupts. */ iowrite32(ioread32(I2C_REG_CTL(alg_data)) & @@ -219,13 +215,13 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap) /* Stop timer. */ del_timer_sync(&alg_data->mif.timer); - dev_dbg(&adap->dev, "%s(): Waking up xfer routine after " + dev_dbg(&alg_data->adapter.dev, "%s(): Waking up xfer routine after " "zero-xfer.\n", __func__); complete(&alg_data->mif.complete); } - dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n", + dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n", __func__, ioread32(I2C_REG_STS(alg_data))); return 0; @@ -237,20 +233,19 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap) * * Reads one byte data from the slave */ -static int i2c_pnx_master_rcv(struct i2c_adapter *adap) +static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data) { - struct i2c_pnx_algo_data *alg_data = adap->algo_data; unsigned int val = 0; u32 ctl = 0; - dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n", + dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n", __func__, ioread32(I2C_REG_STS(alg_data))); /* Check, whether there is already data, * or we didn't 'ask' for it yet. */ if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) { - dev_dbg(&adap->dev, "%s(): Write dummy data to fill " + dev_dbg(&alg_data->adapter.dev, "%s(): Write dummy data to fill " "Rx-fifo...\n", __func__); if (alg_data->mif.len == 1) { @@ -283,7 +278,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap) if (alg_data->mif.len > 0) { val = ioread32(I2C_REG_RX(alg_data)); *alg_data->mif.buf++ = (u8) (val & 0xff); - dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __func__, val, + dev_dbg(&alg_data->adapter.dev, "%s(): rcv 0x%x [%d]\n", __func__, val, alg_data->mif.len); alg_data->mif.len--; @@ -291,7 +286,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap) if (alg_data->last) /* Wait until the STOP is seen. */ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) - dev_err(&adap->dev, "The bus is still " + dev_err(&alg_data->adapter.dev, "The bus is still " "active after timeout\n"); /* Disable master interrupts */ @@ -306,7 +301,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap) } } - dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n", + dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n", __func__, ioread32(I2C_REG_STS(alg_data))); return 0; @@ -314,11 +309,10 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap) static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) { + struct i2c_pnx_algo_data *alg_data = dev_id; u32 stat, ctl; - struct i2c_adapter *adap = dev_id; - struct i2c_pnx_algo_data *alg_data = adap->algo_data; - dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n", + dev_dbg(&alg_data->adapter.dev, "%s(): mstat = %x mctrl = %x, mode = %d\n", __func__, ioread32(I2C_REG_STS(alg_data)), ioread32(I2C_REG_CTL(alg_data)), @@ -341,10 +335,10 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) complete(&alg_data->mif.complete); } else if (stat & mstatus_nai) { /* Slave did not acknowledge, generate a STOP */ - dev_dbg(&adap->dev, "%s(): " + dev_dbg(&alg_data->adapter.dev, "%s(): " "Slave did not acknowledge, generating a STOP.\n", __func__); - i2c_pnx_stop(adap); + i2c_pnx_stop(alg_data); /* Disable master interrupts. */ ctl = ioread32(I2C_REG_CTL(alg_data)); @@ -370,9 +364,9 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) */ if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) { if (alg_data->mif.mode == I2C_SMBUS_WRITE) { - i2c_pnx_master_xmit(adap); + i2c_pnx_master_xmit(alg_data); } else if (alg_data->mif.mode == I2C_SMBUS_READ) { - i2c_pnx_master_rcv(adap); + i2c_pnx_master_rcv(alg_data); } } } @@ -381,7 +375,7 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) stat = ioread32(I2C_REG_STS(alg_data)); iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data)); - dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n", + dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x ctrl = %x.\n", __func__, ioread32(I2C_REG_STS(alg_data)), ioread32(I2C_REG_CTL(alg_data))); @@ -390,11 +384,10 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) static void i2c_pnx_timeout(unsigned long data) { - struct i2c_adapter *adap = (struct i2c_adapter *)data; - struct i2c_pnx_algo_data *alg_data = adap->algo_data; + struct i2c_pnx_algo_data *alg_data = (struct i2c_pnx_algo_data *)data; u32 ctl; - dev_err(&adap->dev, "Master timed out. stat = %04x, cntrl = %04x. " + dev_err(&alg_data->adapter.dev, "Master timed out. stat = %04x, cntrl = %04x. " "Resetting master...\n", ioread32(I2C_REG_STS(alg_data)), ioread32(I2C_REG_CTL(alg_data))); @@ -411,15 +404,14 @@ static void i2c_pnx_timeout(unsigned long data) complete(&alg_data->mif.complete); } -static inline void bus_reset_if_active(struct i2c_adapter *adap) +static inline void bus_reset_if_active(struct i2c_pnx_algo_data *alg_data) { - struct i2c_pnx_algo_data *alg_data = adap->algo_data; u32 stat; if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) { - dev_err(&adap->dev, + dev_err(&alg_data->adapter.dev, "%s: Bus is still active after xfer. Reset it...\n", - adap->name); + alg_data->adapter.name); iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset, I2C_REG_CTL(alg_data)); wait_reset(I2C_PNX_TIMEOUT, alg_data); @@ -453,10 +445,10 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) struct i2c_pnx_algo_data *alg_data = adap->algo_data; u32 stat = ioread32(I2C_REG_STS(alg_data)); - dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n", + dev_dbg(&alg_data->adapter.dev, "%s(): entering: %d messages, stat = %04x.\n", __func__, num, ioread32(I2C_REG_STS(alg_data))); - bus_reset_if_active(adap); + bus_reset_if_active(alg_data); /* Process transactions in a loop. */ for (i = 0; rc >= 0 && i < num; i++) { @@ -466,9 +458,9 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) addr = pmsg->addr; if (pmsg->flags & I2C_M_TEN) { - dev_err(&adap->dev, + dev_err(&alg_data->adapter.dev, "%s: 10 bits addr not supported!\n", - adap->name); + alg_data->adapter.name); rc = -EINVAL; break; } @@ -480,11 +472,11 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) alg_data->mif.ret = 0; alg_data->last = (i == num - 1); - dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __func__, + dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n", __func__, alg_data->mif.mode, alg_data->mif.len); - i2c_pnx_arm_timer(adap); + i2c_pnx_arm_timer(alg_data); /* initialize the completion var */ init_completion(&alg_data->mif.complete); @@ -495,7 +487,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) I2C_REG_CTL(alg_data)); /* Put start-code and slave-address on the bus. */ - rc = i2c_pnx_start(addr, adap); + rc = i2c_pnx_start(addr, alg_data); if (rc < 0) break; @@ -504,31 +496,31 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) if (!(rc = alg_data->mif.ret)) completed++; - dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n", + dev_dbg(&alg_data->adapter.dev, "%s(): Complete, return code = %d.\n", __func__, rc); /* Clear TDI and AFI bits in case they are set. */ if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) { - dev_dbg(&adap->dev, + dev_dbg(&alg_data->adapter.dev, "%s: TDI still set... clearing now.\n", - adap->name); + alg_data->adapter.name); iowrite32(stat, I2C_REG_STS(alg_data)); } if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) { - dev_dbg(&adap->dev, + dev_dbg(&alg_data->adapter.dev, "%s: AFI still set... clearing now.\n", - adap->name); + alg_data->adapter.name); iowrite32(stat, I2C_REG_STS(alg_data)); } } - bus_reset_if_active(adap); + bus_reset_if_active(alg_data); /* Cleanup to be sure... */ alg_data->mif.buf = NULL; alg_data->mif.len = 0; - dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n", + dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n", __func__, ioread32(I2C_REG_STS(alg_data))); if (completed != num) @@ -609,7 +601,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) init_timer(&alg_data->mif.timer); alg_data->mif.timer.function = i2c_pnx_timeout; - alg_data->mif.timer.data = (unsigned long)&alg_data->adapter; + alg_data->mif.timer.data = (unsigned long)alg_data; /* Register I/O resource */ if (!request_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE, @@ -657,7 +649,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) init_completion(&alg_data->mif.complete); ret = request_irq(i2c_pnx->irq, i2c_pnx_interrupt, - 0, pdev->name, &alg_data->adapter); + 0, pdev->name, alg_data); if (ret) goto out_clock; @@ -674,7 +666,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) return 0; out_irq: - free_irq(i2c_pnx->irq, &alg_data->adapter); + free_irq(i2c_pnx->irq, alg_data); out_clock: clk_disable(alg_data->clk); out_unmap: @@ -696,7 +688,7 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev) struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev); struct i2c_pnx_data *i2c_pnx = alg_data->i2c_pnx; - free_irq(i2c_pnx->irq, &alg_data->adapter); + free_irq(i2c_pnx->irq, alg_data); i2c_del_adapter(&alg_data->adapter); clk_disable(alg_data->clk); iounmap(alg_data->ioaddr); -- cgit v1.2.3 From 4be53dbe74818a12cc737a89b5d0aec6095956e0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Nov 2009 12:46:31 +0000 Subject: ARM: PNX4008: i2c-pnx: don't split messages across several lines It makes them harder to grep for. Signed-off-by: Russell King --- drivers/i2c/busses/i2c-pnx.c | 81 ++++++++++++++++++++++++-------------------- 1 file changed, 44 insertions(+), 37 deletions(-) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 181e69211e4f..afc9c968deec 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -86,25 +86,26 @@ static int i2c_pnx_start(unsigned char slave_addr, /* Check for 7 bit slave addresses only */ if (slave_addr & ~0x7f) { - dev_err(&alg_data->adapter.dev, "%s: Invalid slave address %x. " - "Only 7-bit addresses are supported\n", - alg_data->adapter.name, slave_addr); + dev_err(&alg_data->adapter.dev, + "%s: Invalid slave address %x. Only 7-bit addresses are supported\n", + alg_data->adapter.name, slave_addr); return -EINVAL; } /* First, make sure bus is idle */ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) { /* Somebody else is monopolizing the bus */ - dev_err(&alg_data->adapter.dev, "%s: Bus busy. Slave addr = %02x, " - "cntrl = %x, stat = %x\n", - alg_data->adapter.name, slave_addr, - ioread32(I2C_REG_CTL(alg_data)), - ioread32(I2C_REG_STS(alg_data))); + dev_err(&alg_data->adapter.dev, + "%s: Bus busy. Slave addr = %02x, cntrl = %x, stat = %x\n", + alg_data->adapter.name, slave_addr, + ioread32(I2C_REG_CTL(alg_data)), + ioread32(I2C_REG_STS(alg_data))); return -EBUSY; } else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) { /* Sorry, we lost the bus */ - dev_err(&alg_data->adapter.dev, "%s: Arbitration failure. " - "Slave addr = %02x\n", alg_data->adapter.name, slave_addr); + dev_err(&alg_data->adapter.dev, + "%s: Arbitration failure. Slave addr = %02x\n", + alg_data->adapter.name, slave_addr); return -EIO; } @@ -182,15 +183,15 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data) alg_data->mif.len--; iowrite32(val, I2C_REG_TX(alg_data)); - dev_dbg(&alg_data->adapter.dev, "%s(): xmit %#x [%d]\n", __func__, - val, alg_data->mif.len + 1); + dev_dbg(&alg_data->adapter.dev, "%s(): xmit %#x [%d]\n", + __func__, val, alg_data->mif.len + 1); if (alg_data->mif.len == 0) { if (alg_data->last) { /* Wait until the STOP is seen. */ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) - dev_err(&alg_data->adapter.dev, "The bus is still " - "active after timeout\n"); + dev_err(&alg_data->adapter.dev, + "The bus is still active after timeout\n"); } /* Disable master interrupts */ iowrite32(ioread32(I2C_REG_CTL(alg_data)) & @@ -199,7 +200,8 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data) del_timer_sync(&alg_data->mif.timer); - dev_dbg(&alg_data->adapter.dev, "%s(): Waking up xfer routine.\n", + dev_dbg(&alg_data->adapter.dev, + "%s(): Waking up xfer routine.\n", __func__); complete(&alg_data->mif.complete); @@ -215,8 +217,9 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data) /* Stop timer. */ del_timer_sync(&alg_data->mif.timer); - dev_dbg(&alg_data->adapter.dev, "%s(): Waking up xfer routine after " - "zero-xfer.\n", __func__); + dev_dbg(&alg_data->adapter.dev, + "%s(): Waking up xfer routine after zero-xfer.\n", + __func__); complete(&alg_data->mif.complete); } @@ -245,8 +248,9 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data) * or we didn't 'ask' for it yet. */ if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) { - dev_dbg(&alg_data->adapter.dev, "%s(): Write dummy data to fill " - "Rx-fifo...\n", __func__); + dev_dbg(&alg_data->adapter.dev, + "%s(): Write dummy data to fill Rx-fifo...\n", + __func__); if (alg_data->mif.len == 1) { /* Last byte, do not acknowledge next rcv. */ @@ -278,16 +282,16 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data) if (alg_data->mif.len > 0) { val = ioread32(I2C_REG_RX(alg_data)); *alg_data->mif.buf++ = (u8) (val & 0xff); - dev_dbg(&alg_data->adapter.dev, "%s(): rcv 0x%x [%d]\n", __func__, val, - alg_data->mif.len); + dev_dbg(&alg_data->adapter.dev, "%s(): rcv 0x%x [%d]\n", + __func__, val, alg_data->mif.len); alg_data->mif.len--; if (alg_data->mif.len == 0) { if (alg_data->last) /* Wait until the STOP is seen. */ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) - dev_err(&alg_data->adapter.dev, "The bus is still " - "active after timeout\n"); + dev_err(&alg_data->adapter.dev, + "The bus is still active after timeout\n"); /* Disable master interrupts */ ctl = ioread32(I2C_REG_CTL(alg_data)); @@ -312,7 +316,8 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) struct i2c_pnx_algo_data *alg_data = dev_id; u32 stat, ctl; - dev_dbg(&alg_data->adapter.dev, "%s(): mstat = %x mctrl = %x, mode = %d\n", + dev_dbg(&alg_data->adapter.dev, + "%s(): mstat = %x mctrl = %x, mode = %d\n", __func__, ioread32(I2C_REG_STS(alg_data)), ioread32(I2C_REG_CTL(alg_data)), @@ -335,8 +340,8 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) complete(&alg_data->mif.complete); } else if (stat & mstatus_nai) { /* Slave did not acknowledge, generate a STOP */ - dev_dbg(&alg_data->adapter.dev, "%s(): " - "Slave did not acknowledge, generating a STOP.\n", + dev_dbg(&alg_data->adapter.dev, + "%s(): Slave did not acknowledge, generating a STOP.\n", __func__); i2c_pnx_stop(alg_data); @@ -375,7 +380,8 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) stat = ioread32(I2C_REG_STS(alg_data)); iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data)); - dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x ctrl = %x.\n", + dev_dbg(&alg_data->adapter.dev, + "%s(): exiting, stat = %x ctrl = %x.\n", __func__, ioread32(I2C_REG_STS(alg_data)), ioread32(I2C_REG_CTL(alg_data))); @@ -387,10 +393,10 @@ static void i2c_pnx_timeout(unsigned long data) struct i2c_pnx_algo_data *alg_data = (struct i2c_pnx_algo_data *)data; u32 ctl; - dev_err(&alg_data->adapter.dev, "Master timed out. stat = %04x, cntrl = %04x. " - "Resetting master...\n", - ioread32(I2C_REG_STS(alg_data)), - ioread32(I2C_REG_CTL(alg_data))); + dev_err(&alg_data->adapter.dev, + "Master timed out. stat = %04x, cntrl = %04x. Resetting master...\n", + ioread32(I2C_REG_STS(alg_data)), + ioread32(I2C_REG_CTL(alg_data))); /* Reset master and disable interrupts */ ctl = ioread32(I2C_REG_CTL(alg_data)); @@ -411,7 +417,7 @@ static inline void bus_reset_if_active(struct i2c_pnx_algo_data *alg_data) if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) { dev_err(&alg_data->adapter.dev, "%s: Bus is still active after xfer. Reset it...\n", - alg_data->adapter.name); + alg_data->adapter.name); iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset, I2C_REG_CTL(alg_data)); wait_reset(I2C_PNX_TIMEOUT, alg_data); @@ -445,7 +451,8 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) struct i2c_pnx_algo_data *alg_data = adap->algo_data; u32 stat = ioread32(I2C_REG_STS(alg_data)); - dev_dbg(&alg_data->adapter.dev, "%s(): entering: %d messages, stat = %04x.\n", + dev_dbg(&alg_data->adapter.dev, + "%s(): entering: %d messages, stat = %04x.\n", __func__, num, ioread32(I2C_REG_STS(alg_data))); bus_reset_if_active(alg_data); @@ -472,9 +479,8 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) alg_data->mif.ret = 0; alg_data->last = (i == num - 1); - dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n", __func__, - alg_data->mif.mode, - alg_data->mif.len); + dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n", + __func__, alg_data->mif.mode, alg_data->mif.len); i2c_pnx_arm_timer(alg_data); @@ -496,7 +502,8 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) if (!(rc = alg_data->mif.ret)) completed++; - dev_dbg(&alg_data->adapter.dev, "%s(): Complete, return code = %d.\n", + dev_dbg(&alg_data->adapter.dev, + "%s(): Complete, return code = %d.\n", __func__, rc); /* Clear TDI and AFI bits in case they are set. */ -- cgit v1.2.3 From 7e20c837208f6fdd553d04f5fe3e80f44570698b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Nov 2009 12:56:13 +0000 Subject: ARM: PNX4008: i2c-pnx makes no use of asm/uaccess.h nor asm/irq.h Remove unnecessary includes Signed-off-by: Russell King --- drivers/i2c/busses/i2c-pnx.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index afc9c968deec..ecdd5230ae36 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -25,8 +25,6 @@ #include #include -#include -#include #define I2C_PNX_TIMEOUT 10 /* msec */ #define I2C_PNX_SPEED_KHZ 100 -- cgit v1.2.3 From eed18b5fa4d297c681b00144e8c6942dd35d39a7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Nov 2009 12:58:13 +0000 Subject: ARM: PNX4008: use msecs_to_jiffies() rather than open-coding it Signed-off-by: Russell King --- drivers/i2c/busses/i2c-pnx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index ecdd5230ae36..2b0bd0b042d6 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -53,14 +53,14 @@ static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data) static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data) { struct timer_list *timer = &alg_data->mif.timer; - int expires = I2C_PNX_TIMEOUT / (1000 / HZ); + unsigned long expires = msecs_to_jiffies(I2C_PNX_TIMEOUT); if (expires <= 1) expires = 2; del_timer_sync(timer); - dev_dbg(&alg_data->adapter.dev, "Timer armed at %lu plus %u jiffies.\n", + dev_dbg(&alg_data->adapter.dev, "Timer armed at %lu plus %lu jiffies.\n", jiffies, expires); timer->expires = jiffies + expires; -- cgit v1.2.3