From a1fb410a57511b96d980a9a71b5af1873bf43171 Mon Sep 17 00:00:00 2001 From: Marek Behún Date: Mon, 22 Nov 2021 21:51:10 +0100 Subject: phy: marvell: phy-mvebu-cp110-comphy: add support for 5gbase-r Add support for PHY_INTERFACE_MODE_5GBASER mode within the Marvell CP110 common PHY driver. This is currently only supported via SMC calls to TF-A. Legacy support may be added later, if needed. Signed-off-by: Marek Behún Signed-off-by: David S. Miller --- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c index bbd6f2ad6f24..34672e868a1e 100644 --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c @@ -141,6 +141,7 @@ #define COMPHY_FW_SPEED_1250 0 #define COMPHY_FW_SPEED_3125 2 #define COMPHY_FW_SPEED_5000 3 +#define COMPHY_FW_SPEED_515625 4 #define COMPHY_FW_SPEED_103125 6 #define COMPHY_FW_PORT_OFFSET 8 #define COMPHY_FW_PORT_MASK GENMASK(11, 8) @@ -220,6 +221,7 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = { ETH_CONF(2, 0, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII), ETH_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_2500BASEX), ETH_CONF(2, 0, PHY_INTERFACE_MODE_RXAUI, 0x1, COMPHY_FW_MODE_RXAUI), + ETH_CONF(2, 0, PHY_INTERFACE_MODE_5GBASER, 0x1, COMPHY_FW_MODE_XFI), ETH_CONF(2, 0, PHY_INTERFACE_MODE_10GBASER, 0x1, COMPHY_FW_MODE_XFI), GEN_CONF(2, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H), GEN_CONF(2, 0, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), @@ -234,6 +236,7 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = { /* lane 4 */ ETH_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII), ETH_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_2500BASEX), + ETH_CONF(4, 0, PHY_INTERFACE_MODE_5GBASER, 0x2, COMPHY_FW_MODE_XFI), ETH_CONF(4, 0, PHY_INTERFACE_MODE_10GBASER, 0x2, COMPHY_FW_MODE_XFI), ETH_CONF(4, 0, PHY_INTERFACE_MODE_RXAUI, 0x2, COMPHY_FW_MODE_RXAUI), GEN_CONF(4, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D), @@ -241,6 +244,7 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = { GEN_CONF(4, 1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE), ETH_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII), ETH_CONF(4, 1, PHY_INTERFACE_MODE_2500BASEX, -1, COMPHY_FW_MODE_2500BASEX), + ETH_CONF(4, 1, PHY_INTERFACE_MODE_5GBASER, -1, COMPHY_FW_MODE_XFI), ETH_CONF(4, 1, PHY_INTERFACE_MODE_10GBASER, -1, COMPHY_FW_MODE_XFI), /* lane 5 */ ETH_CONF(5, 1, PHY_INTERFACE_MODE_RXAUI, 0x2, COMPHY_FW_MODE_RXAUI), @@ -790,6 +794,11 @@ static int mvebu_comphy_power_on(struct phy *phy) lane->id); fw_speed = COMPHY_FW_SPEED_3125; break; + case PHY_INTERFACE_MODE_5GBASER: + dev_dbg(priv->dev, "set lane %d to 5GBASE-R mode\n", + lane->id); + fw_speed = COMPHY_FW_SPEED_515625; + break; case PHY_INTERFACE_MODE_10GBASER: dev_dbg(priv->dev, "set lane %d to 10GBASE-R mode\n", lane->id); -- cgit v1.2.3