From dad91ee478c7f39e04a33272732147b8c274bb58 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Thu, 12 Jun 2014 07:55:29 +0300 Subject: bnx2x: Fix link for KR with swapped polarity lane This avoids clearing the RX polarity setting in KR mode when polarity lane is swapped, as otherwise this will result in failed link. Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 25 ++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 4fef1e199366..592a8a4ec9c9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3702,7 +3702,8 @@ static void bnx2x_warpcore_restart_AN_KR(struct bnx2x_phy *phy, static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { - u16 lane, i, cl72_ctrl, an_adv = 0; + u16 lane, i, cl72_ctrl, an_adv = 0, val; + u32 wc_lane_config; struct bnx2x *bp = params->bp; static struct bnx2x_reg_set reg_set[] = { {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, @@ -3821,15 +3822,27 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Enable Auto-Detect to support 1G over CL37 as well */ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0x10); - + wc_lane_config = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + shared_hw_config.wc_lane_config)); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX0_PCI_CTRL + (lane << 4), &val); /* Force cl48 sync_status LOW to avoid getting stuck in CL73 * parallel-detect loop when CL73 and CL37 are enabled. */ - CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, - MDIO_AER_BLOCK_AER_REG, 0); + val |= 1 << 11; + + /* Restore Polarity settings in case it was run over by + * previous link owner + */ + if (wc_lane_config & + (SHARED_HW_CFG_RX_LANE0_POL_FLIP_ENABLED << lane)) + val |= 3 << 2; + else + val &= ~(3 << 2); bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI, 0x0800); - bnx2x_set_aer_mmd(params, phy); + MDIO_WC_REG_RX0_PCI_CTRL + (lane << 4), + val); bnx2x_disable_kr2(params, vars, phy); } -- cgit v1.2.3 From a2755be5b5340eeb0f00a318d23a302fe95c45ba Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Thu, 12 Jun 2014 07:55:30 +0300 Subject: bnx2x: Fix 1G-baseT link Set the phy access mode even in case of link-flap avoidance. Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 592a8a4ec9c9..53fb4fa61b40 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -12472,6 +12472,7 @@ static int bnx2x_avoid_link_flap(struct link_params *params, u32 dont_clear_stat, lfa_sts; struct bnx2x *bp = params->bp; + bnx2x_set_mdio_emac_per_phy(bp, params); /* Sync the link parameters */ bnx2x_link_status_update(params, vars); -- cgit v1.2.3 From b17b0ca1642c23f0cd4e4cf52cdb9970798f3501 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 12 Jun 2014 07:55:31 +0300 Subject: bnx2x: Check for UNDI in uncommon branch If L2FW utilized by the UNDI driver has the same version number as that of the regular FW, a driver loading after UNDI and receiving an uncommon answer from management will mistakenly assume the loaded FW matches its own requirement and try to exist the flow via FLR. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 43 +++++++++++++++++------- 1 file changed, 30 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index cf14218697e4..c5061353a475 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -10053,6 +10053,24 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, #define BCM_5710_UNDI_FW_MF_VERS (0x05) #define BNX2X_PREV_UNDI_MF_PORT(p) (BAR_TSTRORM_INTMEM + 0x150c + ((p) << 4)) #define BNX2X_PREV_UNDI_MF_FUNC(f) (BAR_TSTRORM_INTMEM + 0x184c + ((f) << 4)) + +static bool bnx2x_prev_is_after_undi(struct bnx2x *bp) +{ + /* UNDI marks its presence in DORQ - + * it initializes CID offset for normal bell to 0x7 + */ + if (!(REG_RD(bp, MISC_REG_RESET_REG_1) & + MISC_REGISTERS_RESET_REG_1_RST_DORQ)) + return false; + + if (REG_RD(bp, DORQ_REG_NORM_CID_OFST) == 0x7) { + BNX2X_DEV_INFO("UNDI previously loaded\n"); + return true; + } + + return false; +} + static bool bnx2x_prev_unload_undi_fw_supports_mf(struct bnx2x *bp) { u8 major, minor, version; @@ -10302,6 +10320,10 @@ static int bnx2x_prev_unload_uncommon(struct bnx2x *bp) BNX2X_DEV_INFO("Path is unmarked\n"); + /* Cannot proceed with FLR if UNDI is loaded, since FW does not match */ + if (bnx2x_prev_is_after_undi(bp)) + goto out; + /* If function has FLR capabilities, and existing FW version matches * the one required, then FLR will be sufficient to clean any residue * left by previous driver @@ -10322,6 +10344,7 @@ static int bnx2x_prev_unload_uncommon(struct bnx2x *bp) BNX2X_DEV_INFO("Could not FLR\n"); +out: /* Close the MCP request, return failure*/ rc = bnx2x_prev_mcp_done(bp); if (!rc) @@ -10360,19 +10383,13 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) /* close LLH filters towards the BRB */ bnx2x_set_rx_filter(&bp->link_params, 0); - /* Check if the UNDI driver was previously loaded - * UNDI driver initializes CID offset for normal bell to 0x7 - */ - if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) { - tmp_reg = REG_RD(bp, DORQ_REG_NORM_CID_OFST); - if (tmp_reg == 0x7) { - BNX2X_DEV_INFO("UNDI previously loaded\n"); - prev_undi = true; - /* clear the UNDI indication */ - REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); - /* clear possible idle check errors */ - REG_RD(bp, NIG_REG_NIG_INT_STS_CLR_0); - } + /* Check if the UNDI driver was previously loaded */ + if (bnx2x_prev_is_after_undi(bp)) { + prev_undi = true; + /* clear the UNDI indication */ + REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); + /* clear possible idle check errors */ + REG_RD(bp, NIG_REG_NIG_INT_STS_CLR_0); } if (!CHIP_IS_E1x(bp)) /* block FW from writing to host */ -- cgit v1.2.3 From f2cfa997ef77bcfc3900eb968fa5254f951bb8f2 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Thu, 12 Jun 2014 07:55:32 +0300 Subject: bnx2x: Enlarge the dorq threshold for VFs A malicious VF might try to starve the other VFs & PF by creating contineous doorbell floods. In order to negate this, HW has a threshold of doorbells per client, which will stop the client doorbells from arriving if crossed. The threshold currently configured for VFs is too low - under extreme traffic scenarios, it's possible for a VF to reach the threshold and thus for its fastpath to stop working. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index a93c7af7afe6..f7edb4204f91 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1071,8 +1071,10 @@ void bnx2x_iov_init_dq(struct bnx2x *bp) REG_WR(bp, DORQ_REG_VF_TYPE_MIN_MCID_0, 0); REG_WR(bp, DORQ_REG_VF_TYPE_MAX_MCID_0, 0x1ffff); - /* set the VF doorbell threshold */ - REG_WR(bp, DORQ_REG_VF_USAGE_CT_LIMIT, 4); + /* set the VF doorbell threshold. This threshold represents the amount + * of doorbells allowed in the main DORQ fifo for a specific VF. + */ + REG_WR(bp, DORQ_REG_VF_USAGE_CT_LIMIT, 64); } void bnx2x_iov_init_dmae(struct bnx2x *bp) -- cgit v1.2.3