From aca6a8746c36c160517f3216da81196248844d58 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 10 May 2021 19:39:28 +0300 Subject: net: pch_gbe: Convert to use GPIO descriptors This switches the PCH GBE driver to use GPIO descriptors. Signed-off-by: Andy Shevchenko Tested-by: Flavio Suligoi Signed-off-by: David S. Miller --- .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 44 ++++++++++++++++------ 1 file changed, 32 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 3dc29b282a88..8adc8cfaca03 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -8,6 +8,9 @@ #include "pch_gbe.h" #include "pch_gbe_phy.h" + +#include +#include #include #include #include @@ -97,8 +100,6 @@ const char pch_driver_version[] = DRV_VERSION; #define PTP_L4_MULTICAST_SA "01:00:5e:00:01:81" #define PTP_L2_MULTICAST_SA "01:1b:19:00:00:00" -#define MINNOW_PHY_RESET_GPIO 13 - static int pch_gbe_mdio_read(struct net_device *netdev, int addr, int reg); static void pch_gbe_mdio_write(struct net_device *netdev, int addr, int reg, int data); @@ -2628,26 +2629,45 @@ err_free_netdev: return ret; } +static void pch_gbe_gpio_remove_table(void *table) +{ + gpiod_remove_lookup_table(table); +} + +static int pch_gbe_gpio_add_table(struct device *dev, void *table) +{ + gpiod_add_lookup_table(table); + return devm_add_action_or_reset(dev, pch_gbe_gpio_remove_table, table); +} + +static struct gpiod_lookup_table pch_gbe_minnow_gpio_table = { + .dev_id = "0000:02:00.1", + .table = { + GPIO_LOOKUP("sch_gpio.33158", 13, NULL, GPIO_ACTIVE_LOW), + {} + }, +}; + /* The AR803X PHY on the MinnowBoard requires a physical pin to be toggled to * ensure it is awake for probe and init. Request the line and reset the PHY. */ static int pch_gbe_minnow_platform_init(struct pci_dev *pdev) { - unsigned long flags = GPIOF_OUT_INIT_HIGH; - unsigned gpio = MINNOW_PHY_RESET_GPIO; + struct gpio_desc *gpiod; int ret; - ret = devm_gpio_request_one(&pdev->dev, gpio, flags, - "minnow_phy_reset"); - if (ret) { - dev_err(&pdev->dev, - "ERR: Can't request PHY reset GPIO line '%d'\n", gpio); + ret = pch_gbe_gpio_add_table(&pdev->dev, &pch_gbe_minnow_gpio_table); + if (ret) return ret; - } - gpio_set_value(gpio, 0); + gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_OUT_HIGH); + if (IS_ERR(gpiod)) + return dev_err_probe(&pdev->dev, PTR_ERR(gpiod), + "Can't request PHY reset GPIO line\n"); + + gpiod_set_value(gpiod, 1); usleep_range(1250, 1500); - gpio_set_value(gpio, 1); + gpiod_set_value(gpiod, 0); usleep_range(1250, 1500); return ret; -- cgit v1.2.3