From e7bcbd7b81a129d79f205b19f9dd96b00c7e2364 Mon Sep 17 00:00:00 2001
From: Kalesh AP
Date: Wed, 6 May 2015 05:30:32 -0400
Subject: be2net: add support for spoofchk setting

This patch adds support for spoofchk configuration for VFs.
When it is enabled, "spoof checking" is done for both MAC-address and VLAN.
For each VF, the HW ensures that the source MAC address (or vlan) of
every outgoing packet exists in the MAC-list (or vlan-list) configured
for RX filtering for that VF. If not, the packet is dropped and an error
is reported to the driver in the TX completion; this is reflected in the
"tx_spoof_check_err" ethtool counter.
This feature is supported in Skyhawk FW version 10.6.31.0 and above.

Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be.h      |  1 +
 drivers/net/ethernet/emulex/benet/be_cmds.c | 16 +++++++--
 drivers/net/ethernet/emulex/benet/be_cmds.h | 24 +++++++++-----
 drivers/net/ethernet/emulex/benet/be_main.c | 51 ++++++++++++++++++++++++++---
 4 files changed, 78 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 1bf1cdce74ac..bbfbbb313178 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -366,6 +366,7 @@ struct be_vf_cfg {
 	u32 tx_rate;
 	u32 plink_tracking;
 	u32 privileges;
+	bool spoofchk;
 };
 
 enum vf_state {
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index fb140faeafb1..e630fe0c1e44 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -3153,7 +3153,7 @@ int be_cmd_set_mac(struct be_adapter *adapter, u8 *mac, int if_id, u32 dom)
 }
 
 int be_cmd_set_hsw_config(struct be_adapter *adapter, u16 pvid,
-			  u32 domain, u16 intf_id, u16 hsw_mode)
+			  u32 domain, u16 intf_id, u16 hsw_mode, u8 spoofchk)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_set_hsw_config *req;
@@ -3189,6 +3189,14 @@ int be_cmd_set_hsw_config(struct be_adapter *adapter, u16 pvid,
 			      ctxt, hsw_mode);
 	}
 
+	/* Enable/disable both mac and vlan spoof checking */
+	if (!BEx_chip(adapter) && spoofchk) {
+		AMAP_SET_BITS(struct amap_set_hsw_context, mac_spoofchk,
+			      ctxt, spoofchk);
+		AMAP_SET_BITS(struct amap_set_hsw_context, vlan_spoofchk,
+			      ctxt, spoofchk);
+	}
+
 	be_dws_cpu_to_le(req->context, sizeof(req->context));
 	status = be_mcc_notify_wait(adapter);
 
@@ -3199,7 +3207,7 @@ err:
 
 /* Get Hyper switch config */
 int be_cmd_get_hsw_config(struct be_adapter *adapter, u16 *pvid,
-			  u32 domain, u16 intf_id, u8 *mode)
+			  u32 domain, u16 intf_id, u8 *mode, bool *spoofchk)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_get_hsw_config *req;
@@ -3247,6 +3255,10 @@ int be_cmd_get_hsw_config(struct be_adapter *adapter, u16 *pvid,
 		if (mode)
 			*mode = AMAP_GET_BITS(struct amap_get_hsw_resp_context,
 					      port_fwd_type, &resp->context);
+		if (spoofchk)
+			*spoofchk =
+				AMAP_GET_BITS(struct amap_get_hsw_resp_context,
+					      spoofchk, &resp->context);
 	}
 
 err:
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 1ec22300e254..cf5f85544874 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -1745,18 +1745,24 @@ struct be_cmd_req_set_mac_list {
 #define PORT_FWD_TYPE_VEPA		0x3
 #define PORT_FWD_TYPE_VEB		0x2
 
+#define ENABLE_MAC_SPOOFCHK		0x2
+#define DISABLE_MAC_SPOOFCHK		0x3
+
 struct amap_set_hsw_context {
 	u8 interface_id[16];
-	u8 rsvd0[14];
+	u8 rsvd0[8];
+	u8 mac_spoofchk[2];
+	u8 rsvd1[4];
 	u8 pvid_valid;
 	u8 pport;
-	u8 rsvd1[6];
+	u8 rsvd2[6];
 	u8 port_fwd_type[3];
-	u8 rsvd2[7];
+	u8 rsvd3[5];
+	u8 vlan_spoofchk[2];
 	u8 pvid[16];
-	u8 rsvd3[32];
 	u8 rsvd4[32];
 	u8 rsvd5[32];
+	u8 rsvd6[32];
 } __packed;
 
 struct be_cmd_req_set_hsw_config {
@@ -1774,11 +1780,13 @@ struct amap_get_hsw_req_context {
 struct amap_get_hsw_resp_context {
 	u8 rsvd0[6];
 	u8 port_fwd_type[3];
-	u8 rsvd1[7];
+	u8 rsvd1[5];
+	u8 spoofchk;
+	u8 rsvd2;
 	u8 pvid[16];
-	u8 rsvd2[32];
 	u8 rsvd3[32];
 	u8 rsvd4[32];
+	u8 rsvd5[32];
 } __packed;
 
 struct be_cmd_req_get_hsw_config {
@@ -2334,9 +2342,9 @@ int be_cmd_set_mac_list(struct be_adapter *adapter, u8 *mac_array, u8 mac_count,
 			u32 domain);
 int be_cmd_set_mac(struct be_adapter *adapter, u8 *mac, int if_id, u32 dom);
 int be_cmd_set_hsw_config(struct be_adapter *adapter, u16 pvid, u32 domain,
-			  u16 intf_id, u16 hsw_mode);
+			  u16 intf_id, u16 hsw_mode, u8 spoofchk);
 int be_cmd_get_hsw_config(struct be_adapter *adapter, u16 *pvid, u32 domain,
-			  u16 intf_id, u8 *mode);
+			  u16 intf_id, u8 *mode, bool *spoofchk);
 int be_cmd_get_acpi_wol_cap(struct be_adapter *adapter);
 int be_cmd_set_fw_log_level(struct be_adapter *adapter, u32 level);
 int be_cmd_get_fw_log_level(struct be_adapter *adapter);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index b69c42ee505a..d4f25a4b8af7 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1468,6 +1468,7 @@ static int be_get_vf_config(struct net_device *netdev, int vf,
 	vi->qos = vf_cfg->vlan_tag >> VLAN_PRIO_SHIFT;
 	memcpy(&vi->mac, vf_cfg->mac_addr, ETH_ALEN);
 	vi->linkstate = adapter->vf_cfg[vf].plink_tracking;
+	vi->spoofchk = adapter->vf_cfg[vf].spoofchk;
 
 	return 0;
 }
@@ -1480,7 +1481,7 @@ static int be_set_vf_tvt(struct be_adapter *adapter, int vf, u16 vlan)
 	int status;
 
 	/* Enable Transparent VLAN Tagging */
-	status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, vf_if_id, 0);
+	status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, vf_if_id, 0, 0);
 	if (status)
 		return status;
 
@@ -1509,7 +1510,7 @@ static int be_clear_vf_tvt(struct be_adapter *adapter, int vf)
 
 	/* Reset Transparent VLAN Tagging. */
 	status = be_cmd_set_hsw_config(adapter, BE_RESET_VLAN_TAG_ID, vf + 1,
-				       vf_cfg->if_handle, 0);
+				       vf_cfg->if_handle, 0, 0);
 	if (status)
 		return status;
 
@@ -1644,6 +1645,39 @@ static int be_set_vf_link_state(struct net_device *netdev, int vf,
 	return 0;
 }
 
+static int be_set_vf_spoofchk(struct net_device *netdev, int vf, bool enable)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf];
+	u8 spoofchk;
+	int status;
+
+	if (!sriov_enabled(adapter))
+		return -EPERM;
+
+	if (vf >= adapter->num_vfs)
+		return -EINVAL;
+
+	if (BEx_chip(adapter))
+		return -EOPNOTSUPP;
+
+	if (enable == vf_cfg->spoofchk)
+		return 0;
+
+	spoofchk = enable ? ENABLE_MAC_SPOOFCHK : DISABLE_MAC_SPOOFCHK;
+
+	status = be_cmd_set_hsw_config(adapter, 0, vf + 1, vf_cfg->if_handle,
+				       0, spoofchk);
+	if (status) {
+		dev_err(&adapter->pdev->dev,
+			"Spoofchk change on VF %d failed: %#x\n", vf, status);
+		return be_cmd_status(status);
+	}
+
+	vf_cfg->spoofchk = enable;
+	return 0;
+}
+
 static void be_aic_update(struct be_aic_obj *aic, u64 rx_pkts, u64 tx_pkts,
 			  ulong now)
 {
@@ -3612,6 +3646,7 @@ static int be_vf_setup(struct be_adapter *adapter)
 	struct device *dev = &adapter->pdev->dev;
 	struct be_vf_cfg *vf_cfg;
 	int status, old_vfs, vf;
+	bool spoofchk;
 
 	old_vfs = pci_num_vf(adapter->pdev);
 
@@ -3659,6 +3694,12 @@ static int be_vf_setup(struct be_adapter *adapter)
 		if (!old_vfs)
 			be_cmd_config_qos(adapter, 0, 0, vf + 1);
 
+		status = be_cmd_get_hsw_config(adapter, NULL, vf + 1,
+					       vf_cfg->if_handle, NULL,
+					       &spoofchk);
+		if (!status)
+			vf_cfg->spoofchk = spoofchk;
+
 		if (!old_vfs) {
 			be_cmd_enable_vf(adapter, vf + 1);
 			be_cmd_set_logical_link_config(adapter,
@@ -4831,7 +4872,7 @@ static int be_ndo_bridge_setlink(struct net_device *dev, struct nlmsghdr *nlh,
 					       adapter->if_handle,
 					       mode == BRIDGE_MODE_VEPA ?
 					       PORT_FWD_TYPE_VEPA :
-					       PORT_FWD_TYPE_VEB);
+					       PORT_FWD_TYPE_VEB, 0);
 		if (status)
 			goto err;
 
@@ -4863,7 +4904,8 @@ static int be_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
 		hsw_mode = PORT_FWD_TYPE_VEB;
 	} else {
 		status = be_cmd_get_hsw_config(adapter, NULL, 0,
-					       adapter->if_handle, &hsw_mode);
+					       adapter->if_handle, &hsw_mode,
+					       NULL);
 		if (status)
 			return 0;
 	}
@@ -5016,6 +5058,7 @@ static const struct net_device_ops be_netdev_ops = {
 	.ndo_set_vf_rate	= be_set_vf_tx_rate,
 	.ndo_get_vf_config	= be_get_vf_config,
 	.ndo_set_vf_link_state  = be_set_vf_link_state,
+	.ndo_set_vf_spoofchk    = be_set_vf_spoofchk,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= be_netpoll,
 #endif
-- 
cgit v1.2.3


From 209477704187472d6055e83bbd0fd9b51b79fa15 Mon Sep 17 00:00:00 2001
From: Padmanabh Ratnakar
Date: Wed, 6 May 2015 05:30:33 -0400
Subject: be2net: set interrupt moderation for Skyhawk-R using EQ-DB

Currently adaptive interrupt moderation is set by calculating
and configuring an EQ-delay every second. This is done via
a FW-cmd. But, on Skyhawk-R a "re-arm to interrupt" delay
can be set while ringing the EQ-DB. This patch uses this
facility to calculate and set the interrupt delay every 1ms.
This helps moderating interrupts better when the traffic
is bursty.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be.h         |   1 +
 drivers/net/ethernet/emulex/benet/be_ethtool.c |   8 ++
 drivers/net/ethernet/emulex/benet/be_hw.h      |  12 ++
 drivers/net/ethernet/emulex/benet/be_main.c    | 152 +++++++++++++++++--------
 4 files changed, 128 insertions(+), 45 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index bbfbbb313178..ddc7a72cc926 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -805,6 +805,7 @@ bool be_pause_supported(struct be_adapter *adapter);
 u32 be_get_fw_log_level(struct be_adapter *adapter);
 int be_update_queues(struct be_adapter *adapter);
 int be_poll(struct napi_struct *napi, int budget);
+void be_eqd_update(struct be_adapter *adapter, bool force_update);
 
 /*
  * internal function to initialize-cleanup roce device.
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index b765c24625bf..61321de68a93 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -368,6 +368,14 @@ static int be_set_coalesce(struct net_device *netdev,
 		aic++;
 	}
 
+	/* For Skyhawk, the EQD setting happens via EQ_DB when AIC is enabled.
+	 * When AIC is disabled, persistently force set EQD value via the
+	 * FW cmd, so that we don't have to calculate the delay multiplier
+	 * encode value each time EQ_DB is rung
+	 */
+	if (!et->use_adaptive_rx_coalesce && skyhawk_chip(adapter))
+		be_eqd_update(adapter, true);
+
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index 48840889db62..ca074ba6dd54 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -132,6 +132,18 @@
 #define DB_EQ_NUM_POPPED_SHIFT		(16)	/* bits 16 - 28 */
 /* Rearm bit */
 #define DB_EQ_REARM_SHIFT		(29)	/* bit 29 */
+/* Rearm to interrupt delay encoding */
+#define DB_EQ_R2I_DLY_SHIFT		(30)    /* bits 30 - 31 */
+
+/* Rearm to interrupt (R2I) delay multiplier encoding represents 3 different
+ * values configured in CEV_REARM2IRPT_DLY_MULT_CSR register. This value is
+ * programmed by host driver while ringing an EQ doorbell(EQ_DB) if a delay
+ * between rearming the EQ and next interrupt on this EQ is desired.
+ */
+#define	R2I_DLY_ENC_0			0	/* No delay */
+#define	R2I_DLY_ENC_1			1	/* maps to 160us EQ delay */
+#define	R2I_DLY_ENC_2			2	/* maps to 96us EQ delay */
+#define	R2I_DLY_ENC_3			3	/* maps to 48us EQ delay */
 
 /********* Compl Q door bell *************/
 #define DB_CQ_OFFSET 			0x120
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index d4f25a4b8af7..a120be0334b0 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -211,7 +211,8 @@ static void be_txq_notify(struct be_adapter *adapter, struct be_tx_obj *txo,
 }
 
 static void be_eq_notify(struct be_adapter *adapter, u16 qid,
-			 bool arm, bool clear_int, u16 num_popped)
+			 bool arm, bool clear_int, u16 num_popped,
+			 u32 eq_delay_mult_enc)
 {
 	u32 val = 0;
 
@@ -227,6 +228,7 @@ static void be_eq_notify(struct be_adapter *adapter, u16 qid,
 		val |= 1 << DB_EQ_CLR_SHIFT;
 	val |= 1 << DB_EQ_EVNT_SHIFT;
 	val |= num_popped << DB_EQ_NUM_POPPED_SHIFT;
+	val |= eq_delay_mult_enc << DB_EQ_R2I_DLY_SHIFT;
 	iowrite32(val, adapter->db + DB_EQ_OFFSET);
 }
 
@@ -1686,61 +1688,110 @@ static void be_aic_update(struct be_aic_obj *aic, u64 rx_pkts, u64 tx_pkts,
 	aic->jiffies = now;
 }
 
-static void be_eqd_update(struct be_adapter *adapter)
+static int be_get_new_eqd(struct be_eq_obj *eqo)
 {
-	struct be_set_eqd set_eqd[MAX_EVT_QS];
-	int eqd, i, num = 0, start;
+	struct be_adapter *adapter = eqo->adapter;
+	int eqd, start;
 	struct be_aic_obj *aic;
-	struct be_eq_obj *eqo;
 	struct be_rx_obj *rxo;
 	struct be_tx_obj *txo;
-	u64 rx_pkts, tx_pkts;
+	u64 rx_pkts = 0, tx_pkts = 0;
 	ulong now;
 	u32 pps, delta;
+	int i;
 
-	for_all_evt_queues(adapter, eqo, i) {
-		aic = &adapter->aic_obj[eqo->idx];
-		if (!aic->enable) {
-			if (aic->jiffies)
-				aic->jiffies = 0;
-			eqd = aic->et_eqd;
-			goto modify_eqd;
-		}
+	aic = &adapter->aic_obj[eqo->idx];
+	if (!aic->enable) {
+		if (aic->jiffies)
+			aic->jiffies = 0;
+		eqd = aic->et_eqd;
+		return eqd;
+	}
 
-		rxo = &adapter->rx_obj[eqo->idx];
+	for_all_rx_queues_on_eq(adapter, eqo, rxo, i) {
 		do {
 			start = u64_stats_fetch_begin_irq(&rxo->stats.sync);
-			rx_pkts = rxo->stats.rx_pkts;
+			rx_pkts += rxo->stats.rx_pkts;
 		} while (u64_stats_fetch_retry_irq(&rxo->stats.sync, start));
+	}
 
-		txo = &adapter->tx_obj[eqo->idx];
+	for_all_tx_queues_on_eq(adapter, eqo, txo, i) {
 		do {
 			start = u64_stats_fetch_begin_irq(&txo->stats.sync);
-			tx_pkts = txo->stats.tx_reqs;
+			tx_pkts += txo->stats.tx_reqs;
 		} while (u64_stats_fetch_retry_irq(&txo->stats.sync, start));
+	}
 
-		/* Skip, if wrapped around or first calculation */
-		now = jiffies;
-		if (!aic->jiffies || time_before(now, aic->jiffies) ||
-		    rx_pkts < aic->rx_pkts_prev ||
-		    tx_pkts < aic->tx_reqs_prev) {
-			be_aic_update(aic, rx_pkts, tx_pkts, now);
-			continue;
-		}
+	/* Skip, if wrapped around or first calculation */
+	now = jiffies;
+	if (!aic->jiffies || time_before(now, aic->jiffies) ||
+	    rx_pkts < aic->rx_pkts_prev ||
+	    tx_pkts < aic->tx_reqs_prev) {
+		be_aic_update(aic, rx_pkts, tx_pkts, now);
+		return aic->prev_eqd;
+	}
 
-		delta = jiffies_to_msecs(now - aic->jiffies);
-		pps = (((u32)(rx_pkts - aic->rx_pkts_prev) * 1000) / delta) +
-			(((u32)(tx_pkts - aic->tx_reqs_prev) * 1000) / delta);
-		eqd = (pps / 15000) << 2;
+	delta = jiffies_to_msecs(now - aic->jiffies);
+	if (delta == 0)
+		return aic->prev_eqd;
 
-		if (eqd < 8)
-			eqd = 0;
-		eqd = min_t(u32, eqd, aic->max_eqd);
-		eqd = max_t(u32, eqd, aic->min_eqd);
+	pps = (((u32)(rx_pkts - aic->rx_pkts_prev) * 1000) / delta) +
+		(((u32)(tx_pkts - aic->tx_reqs_prev) * 1000) / delta);
+	eqd = (pps / 15000) << 2;
 
-		be_aic_update(aic, rx_pkts, tx_pkts, now);
-modify_eqd:
-		if (eqd != aic->prev_eqd) {
+	if (eqd < 8)
+		eqd = 0;
+	eqd = min_t(u32, eqd, aic->max_eqd);
+	eqd = max_t(u32, eqd, aic->min_eqd);
+
+	be_aic_update(aic, rx_pkts, tx_pkts, now);
+
+	return eqd;
+}
+
+/* For Skyhawk-R only */
+static u32 be_get_eq_delay_mult_enc(struct be_eq_obj *eqo)
+{
+	struct be_adapter *adapter = eqo->adapter;
+	struct be_aic_obj *aic = &adapter->aic_obj[eqo->idx];
+	ulong now = jiffies;
+	int eqd;
+	u32 mult_enc;
+
+	if (!aic->enable)
+		return 0;
+
+	if (time_before_eq(now, aic->jiffies) ||
+	    jiffies_to_msecs(now - aic->jiffies) < 1)
+		eqd = aic->prev_eqd;
+	else
+		eqd = be_get_new_eqd(eqo);
+
+	if (eqd > 100)
+		mult_enc = R2I_DLY_ENC_1;
+	else if (eqd > 60)
+		mult_enc = R2I_DLY_ENC_2;
+	else if (eqd > 20)
+		mult_enc = R2I_DLY_ENC_3;
+	else
+		mult_enc = R2I_DLY_ENC_0;
+
+	aic->prev_eqd = eqd;
+
+	return mult_enc;
+}
+
+void be_eqd_update(struct be_adapter *adapter, bool force_update)
+{
+	struct be_set_eqd set_eqd[MAX_EVT_QS];
+	struct be_aic_obj *aic;
+	struct be_eq_obj *eqo;
+	int i, num = 0, eqd;
+
+	for_all_evt_queues(adapter, eqo, i) {
+		aic = &adapter->aic_obj[eqo->idx];
+		eqd = be_get_new_eqd(eqo);
+		if (force_update || eqd != aic->prev_eqd) {
 			set_eqd[num].delay_multiplier = (eqd * 65)/100;
 			set_eqd[num].eq_id = eqo->q.id;
 			aic->prev_eqd = eqd;
@@ -2248,7 +2299,7 @@ static void be_eq_clean(struct be_eq_obj *eqo)
 {
 	int num = events_get(eqo);
 
-	be_eq_notify(eqo->adapter, eqo->q.id, false, true, num);
+	be_eq_notify(eqo->adapter, eqo->q.id, false, true, num, 0);
 }
 
 static void be_rx_cq_clean(struct be_rx_obj *rxo)
@@ -2609,7 +2660,7 @@ static irqreturn_t be_intx(int irq, void *dev)
 		if (num_evts)
 			eqo->spurious_intr = 0;
 	}
-	be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
+	be_eq_notify(adapter, eqo->q.id, false, true, num_evts, 0);
 
 	/* Return IRQ_HANDLED only for the the first spurious intr
 	 * after a valid intr to stop the kernel from branding
@@ -2625,7 +2676,7 @@ static irqreturn_t be_msix(int irq, void *dev)
 {
 	struct be_eq_obj *eqo = dev;
 
-	be_eq_notify(eqo->adapter, eqo->q.id, false, true, 0);
+	be_eq_notify(eqo->adapter, eqo->q.id, false, true, 0, 0);
 	napi_schedule(&eqo->napi);
 	return IRQ_HANDLED;
 }
@@ -2874,6 +2925,7 @@ int be_poll(struct napi_struct *napi, int budget)
 	int max_work = 0, work, i, num_evts;
 	struct be_rx_obj *rxo;
 	struct be_tx_obj *txo;
+	u32 mult_enc = 0;
 
 	num_evts = events_get(eqo);
 
@@ -2899,10 +2951,18 @@ int be_poll(struct napi_struct *napi, int budget)
 
 	if (max_work < budget) {
 		napi_complete(napi);
-		be_eq_notify(adapter, eqo->q.id, true, false, num_evts);
+
+		/* Skyhawk EQ_DB has a provision to set the rearm to interrupt
+		 * delay via a delay multiplier encoding value
+		 */
+		if (skyhawk_chip(adapter))
+			mult_enc = be_get_eq_delay_mult_enc(eqo);
+
+		be_eq_notify(adapter, eqo->q.id, true, false, num_evts,
+			     mult_enc);
 	} else {
 		/* As we'll continue in polling mode, count and clear events */
-		be_eq_notify(adapter, eqo->q.id, false, false, num_evts);
+		be_eq_notify(adapter, eqo->q.id, false, false, num_evts, 0);
 	}
 	return max_work;
 }
@@ -3299,7 +3359,7 @@ static int be_open(struct net_device *netdev)
 	for_all_evt_queues(adapter, eqo, i) {
 		napi_enable(&eqo->napi);
 		be_enable_busy_poll(eqo);
-		be_eq_notify(adapter, eqo->q.id, true, true, 0);
+		be_eq_notify(adapter, eqo->q.id, true, true, 0, 0);
 	}
 	adapter->flags |= BE_FLAGS_NAPI_ENABLED;
 
@@ -4225,7 +4285,7 @@ static void be_netpoll(struct net_device *netdev)
 	int i;
 
 	for_all_evt_queues(adapter, eqo, i) {
-		be_eq_notify(eqo->adapter, eqo->q.id, false, true, 0);
+		be_eq_notify(eqo->adapter, eqo->q.id, false, true, 0, 0);
 		napi_schedule(&eqo->napi);
 	}
 }
@@ -5227,7 +5287,9 @@ static void be_worker(struct work_struct *work)
 			be_post_rx_frags(rxo, GFP_KERNEL, MAX_RX_POST);
 	}
 
-	be_eqd_update(adapter);
+	/* EQ-delay update for Skyhawk is done while notifying EQ */
+	if (!skyhawk_chip(adapter))
+		be_eqd_update(adapter, false);
 
 	if (adapter->flags & BE_FLAGS_EVT_INCOMPATIBLE_SFP)
 		be_log_sfp_info(adapter);
-- 
cgit v1.2.3


From 0ed7d7498d61bab40943ccb95d6004b247eead0e Mon Sep 17 00:00:00 2001
From: Somnath Kotur
Date: Wed, 6 May 2015 05:30:34 -0400
Subject: be2net: receive pkts with L3, L4 errors on VFs

Currently pkts with L3 or L4 errors received on PFs are not dropped
by the adapter, but instead sent to the stack. This helps the network stack
to better reflect error statistics. This was not being done on BE3 VFs.
This patch fixes this for BE3 VFs.

Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index a120be0334b0..b0db565c6248 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3659,7 +3659,7 @@ static int be_vfs_if_create(struct be_adapter *adapter)
 
 	/* If a FW profile exists, then cap_flags are updated */
 	cap_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
-		    BE_IF_FLAGS_MULTICAST;
+		    BE_IF_FLAGS_MULTICAST | BE_IF_FLAGS_PASS_L3L4_ERRORS;
 
 	for_all_vfs(adapter, vf_cfg, vf) {
 		if (!BE3_chip(adapter)) {
-- 
cgit v1.2.3


From 77be8c1c4ceabdb61781e96f8610fdc53c03c072 Mon Sep 17 00:00:00 2001
From: Kalesh AP
Date: Wed, 6 May 2015 05:30:35 -0400
Subject: be2net: check for INSUFFICIENT_VLANS error

When the FW runs out of vlan filters it can either return an
INSUFFICIENT_RESOURCES error or an INSUFFICIENT_VLANS error.
The driver currently checks only for the former error value.
This patch adds a check for the latter value too.

Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_cmds.c | 1 +
 drivers/net/ethernet/emulex/benet/be_cmds.h | 3 ++-
 drivers/net/ethernet/emulex/benet/be_main.c | 3 ++-
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index e630fe0c1e44..095b1dcd55ea 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -140,6 +140,7 @@ static bool be_skip_err_log(u8 opcode, u16 base_status, u16 addl_status)
 	if (base_status == MCC_STATUS_NOT_SUPPORTED ||
 	    base_status == MCC_STATUS_ILLEGAL_REQUEST ||
 	    addl_status == MCC_ADDL_STATUS_TOO_MANY_INTERFACES ||
+	    addl_status == MCC_ADDL_STATUS_INSUFFICIENT_VLANS ||
 	    (opcode == OPCODE_COMMON_WRITE_FLASHROM &&
 	    (base_status == MCC_STATUS_ILLEGAL_FIELD ||
 	     addl_status == MCC_ADDL_STATUS_FLASH_IMAGE_CRC_MISMATCH)))
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index cf5f85544874..5eccf877cf6b 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -65,7 +65,8 @@ enum mcc_base_status {
 enum mcc_addl_status {
 	MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES = 0x16,
 	MCC_ADDL_STATUS_FLASH_IMAGE_CRC_MISMATCH = 0x4d,
-	MCC_ADDL_STATUS_TOO_MANY_INTERFACES = 0x4a
+	MCC_ADDL_STATUS_TOO_MANY_INTERFACES = 0x4a,
+	MCC_ADDL_STATUS_INSUFFICIENT_VLANS = 0xab
 };
 
 #define CQE_BASE_STATUS_MASK		0xFFFF
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index b0db565c6248..770779ec4714 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1269,7 +1269,8 @@ static int be_vid_config(struct be_adapter *adapter)
 	if (status) {
 		dev_err(dev, "Setting HW VLAN filtering failed\n");
 		/* Set to VLAN promisc mode as setting VLAN filter failed */
-		if (addl_status(status) ==
+		if (addl_status(status) == MCC_ADDL_STATUS_INSUFFICIENT_VLANS ||
+		    addl_status(status) ==
 				MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES)
 			return be_set_vlan_promisc(adapter);
 	} else if (adapter->if_flags & BE_IF_FLAGS_VLAN_PROMISCUOUS) {
-- 
cgit v1.2.3


From b02e60c86eac4451543f3d2c695545baf093e9ea Mon Sep 17 00:00:00 2001
From: Suresh Reddy
Date: Wed, 6 May 2015 05:30:36 -0400
Subject: be2net: post full RXQ on interface enable

When an RXQ is created in be_open(), the driver currently posts only
64 buffers. This sometimes results in packet drops when there is a traffic
burst as soon as the interface is enabled.
This patch fixes this problem by posting the full RXQ on interface enable.

Signed-off-by: Suresh Reddy <Suresh.Reddy@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 770779ec4714..09c3faf7dff9 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3326,9 +3326,12 @@ static int be_rx_qs_create(struct be_adapter *adapter)
 
 	memcpy(rss->rss_hkey, rss_key, RSS_HASH_KEY_LEN);
 
-	/* First time posting */
+	/* Post 1 less than RXQ-len to avoid head being equal to tail,
+	 * which is a queue empty condition
+	 */
 	for_all_rx_queues(adapter, rxo, i)
-		be_post_rx_frags(rxo, GFP_KERNEL, MAX_RX_POST);
+		be_post_rx_frags(rxo, GFP_KERNEL, RX_Q_LEN - 1);
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From a6e6ff6eee12f3edc7630e81993bf880a4f0d340 Mon Sep 17 00:00:00 2001
From: Vasundhara Volam
Date: Wed, 6 May 2015 05:30:37 -0400
Subject: be2net: simplify UFI compatibility checking

The code in be_check_ufi_compatibility() checks to see if a UFI file meant
for a lower rev of a chip is being flashed on a higher rev, which is
disallowed. This patch re-writes the code needed for this check in a much
simpler manner.

Signed-off-by: Vasundhara Volam <vasundhara.volam@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_cmds.h |  4 ---
 drivers/net/ethernet/emulex/benet/be_main.c | 56 +++++++++--------------------
 2 files changed, 16 insertions(+), 44 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 5eccf877cf6b..269403303bf7 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -1110,10 +1110,6 @@ struct be_cmd_req_query_fw_cfg {
 	u32 rsvd[31];
 };
 
-/* ASIC revisions */
-#define ASIC_REV_B0		0x10
-#define ASIC_REV_P2		0x11
-
 struct be_cmd_resp_query_fw_cfg {
 	struct be_cmd_resp_hdr hdr;
 	u32 be_config_number;
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 09c3faf7dff9..e0ca333f95d3 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -4773,14 +4773,11 @@ static int lancer_fw_download(struct be_adapter *adapter,
 	return 0;
 }
 
-#define BE2_UFI		2
-#define BE3_UFI		3
-#define BE3R_UFI	10
-#define SH_UFI		4
-#define SH_P2_UFI	11
-
-static int be_get_ufi_type(struct be_adapter *adapter,
-			   struct flash_file_hdr_g3 *fhdr)
+/* Check if the flash image file is compatible with the adapter that
+ * is being flashed.
+ */
+static bool be_check_ufi_compatibility(struct be_adapter *adapter,
+				       struct flash_file_hdr_g3 *fhdr)
 {
 	if (!fhdr) {
 		dev_err(&adapter->pdev->dev, "Invalid FW UFI file");
@@ -4792,43 +4789,22 @@ static int be_get_ufi_type(struct be_adapter *adapter,
 	 */
 	switch (fhdr->build[0]) {
 	case BLD_STR_UFI_TYPE_SH:
-		return (fhdr->asic_type_rev == ASIC_REV_P2) ? SH_P2_UFI :
-								SH_UFI;
+		if (!skyhawk_chip(adapter))
+			return false;
+		break;
 	case BLD_STR_UFI_TYPE_BE3:
-		return (fhdr->asic_type_rev == ASIC_REV_B0) ? BE3R_UFI :
-								BE3_UFI;
+		if (!BE3_chip(adapter))
+			return false;
+		break;
 	case BLD_STR_UFI_TYPE_BE2:
-		return BE2_UFI;
-	default:
-		return -1;
-	}
-}
-
-/* Check if the flash image file is compatible with the adapter that
- * is being flashed.
- * BE3 chips with asic-rev B0 must be flashed only with BE3R_UFI type.
- * Skyhawk chips with asic-rev P2 must be flashed only with SH_P2_UFI type.
- */
-static bool be_check_ufi_compatibility(struct be_adapter *adapter,
-				       struct flash_file_hdr_g3 *fhdr)
-{
-	int ufi_type = be_get_ufi_type(adapter, fhdr);
-
-	switch (ufi_type) {
-	case SH_P2_UFI:
-		return skyhawk_chip(adapter);
-	case SH_UFI:
-		return (skyhawk_chip(adapter) &&
-			adapter->asic_rev < ASIC_REV_P2);
-	case BE3R_UFI:
-		return BE3_chip(adapter);
-	case BE3_UFI:
-		return (BE3_chip(adapter) && adapter->asic_rev < ASIC_REV_B0);
-	case BE2_UFI:
-		return BE2_chip(adapter);
+		if (!BE2_chip(adapter))
+			return false;
+		break;
 	default:
 		return false;
 	}
+
+	return (fhdr->asic_type_rev >= adapter->asic_rev);
 }
 
 static int be_fw_download(struct be_adapter *adapter, const struct firmware* fw)
-- 
cgit v1.2.3


From 18c57c74a12031144fd63a055a0a159ac218aaab Mon Sep 17 00:00:00 2001
From: Kalesh AP
Date: Wed, 6 May 2015 05:30:38 -0400
Subject: be2net: use be_virtfn() instead of !be_physfn()

Use be_virtfn() to determine a VF instead of !be_physfn() for better
readability.

Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_cmds.c |  4 ++--
 drivers/net/ethernet/emulex/benet/be_main.c | 11 ++++++-----
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 095b1dcd55ea..f03ec2dcc971 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -1458,7 +1458,7 @@ int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags, u32 en_flags,
 		*if_handle = le32_to_cpu(resp->interface_id);
 
 		/* Hack to retrieve VF's pmac-id on BE3 */
-		if (BE3_chip(adapter) && !be_physfn(adapter))
+		if (BE3_chip(adapter) && be_virtfn(adapter))
 			adapter->pmac_id[0] = le32_to_cpu(resp->pmac_id);
 	}
 	return status;
@@ -3271,7 +3271,7 @@ static bool be_is_wol_excluded(struct be_adapter *adapter)
 {
 	struct pci_dev *pdev = adapter->pdev;
 
-	if (!be_physfn(adapter))
+	if (be_virtfn(adapter))
 		return true;
 
 	switch (pdev->subsystem_device) {
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index e0ca333f95d3..229134bda0bd 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3112,7 +3112,7 @@ fail:
 	dev_warn(dev, "MSIx enable failed\n");
 
 	/* INTx is not supported in VFs, so fail probe if enable_msix fails */
-	if (!be_physfn(adapter))
+	if (be_virtfn(adapter))
 		return num_vec;
 	return 0;
 }
@@ -3159,7 +3159,7 @@ static int be_irq_register(struct be_adapter *adapter)
 		if (status == 0)
 			goto done;
 		/* INTx is not supported for VF */
-		if (!be_physfn(adapter))
+		if (be_virtfn(adapter))
 			return status;
 	}
 
@@ -3840,8 +3840,9 @@ static void BEx_get_resources(struct be_adapter *adapter,
 	 *    *only* if it is RSS-capable.
 	 */
 	if (BE2_chip(adapter) || use_sriov ||  (adapter->port_num > 1) ||
-	    !be_physfn(adapter) || (be_is_mc(adapter) &&
-	    !(adapter->function_caps & BE_FUNCTION_CAPS_RSS))) {
+	    be_virtfn(adapter) ||
+	    (be_is_mc(adapter) &&
+	     !(adapter->function_caps & BE_FUNCTION_CAPS_RSS))) {
 		res->max_tx_qs = 1;
 	} else if (adapter->function_caps & BE_FUNCTION_CAPS_SUPER_NIC) {
 		struct be_resources super_nic_res = {0};
@@ -5289,7 +5290,7 @@ static void be_unmap_pci_bars(struct be_adapter *adapter)
 
 static int db_bar(struct be_adapter *adapter)
 {
-	if (lancer_chip(adapter) || !be_physfn(adapter))
+	if (lancer_chip(adapter) || be_virtfn(adapter))
 		return 0;
 	else
 		return 4;
-- 
cgit v1.2.3


From d19261b8ef508dcbd3bf8e076245f3c90f828bcd Mon Sep 17 00:00:00 2001
From: Vasundhara Volam
Date: Wed, 6 May 2015 05:30:39 -0400
Subject: be2net: update copyright year to 2015

Signed-off-by: Vasundhara Volam <vasundhara.volam@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be.h         | 2 +-
 drivers/net/ethernet/emulex/benet/be_cmds.c    | 2 +-
 drivers/net/ethernet/emulex/benet/be_cmds.h    | 2 +-
 drivers/net/ethernet/emulex/benet/be_ethtool.c | 2 +-
 drivers/net/ethernet/emulex/benet/be_hw.h      | 2 +-
 drivers/net/ethernet/emulex/benet/be_main.c    | 2 +-
 drivers/net/ethernet/emulex/benet/be_roce.c    | 2 +-
 drivers/net/ethernet/emulex/benet/be_roce.h    | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index ddc7a72cc926..3e37b5948196 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2014 Emulex
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index f03ec2dcc971..b419bde29a6f 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2014 Emulex
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 269403303bf7..c713d514fcd1 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2014 Emulex
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index 61321de68a93..9124a93eb474 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2014 Emulex
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index ca074ba6dd54..c684bb32b487 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2014 Emulex
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 229134bda0bd..f15a3cfeb217 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2014 Emulex
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_roce.c b/drivers/net/ethernet/emulex/benet/be_roce.c
index 132866433a25..60368207bf58 100644
--- a/drivers/net/ethernet/emulex/benet/be_roce.c
+++ b/drivers/net/ethernet/emulex/benet/be_roce.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2014 Emulex
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_roce.h b/drivers/net/ethernet/emulex/benet/be_roce.h
index e6f7eb1a7d87..cde6ef905ec4 100644
--- a/drivers/net/ethernet/emulex/benet/be_roce.h
+++ b/drivers/net/ethernet/emulex/benet/be_roce.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2014 Emulex
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
-- 
cgit v1.2.3


From 029e9330dda8c6e42910a8ce59204d87ca228447 Mon Sep 17 00:00:00 2001
From: Sathya Perla
Date: Wed, 6 May 2015 05:30:40 -0400
Subject: be2net: update the driver version to 10.6.0.2

Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 3e37b5948196..1eafc075edae 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -35,7 +35,7 @@
 #include "be_hw.h"
 #include "be_roce.h"
 
-#define DRV_VER			"10.6.0.1"
+#define DRV_VER			"10.6.0.2"
 #define DRV_NAME		"be2net"
 #define BE_NAME			"Emulex BladeEngine2"
 #define BE3_NAME		"Emulex BladeEngine3"
-- 
cgit v1.2.3