From f930ddd0583c1a9e68d80a27d4e5077e795007b1 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Wed, 21 Nov 2012 15:55:21 +0100
Subject: drm/i915: remove duplicate register #defines

Somehow a chunk of unused register defines ended up in the middle of
the PLL defines. They go back to the original kms merging.

The only used #define is SR01, move it to the register name together
with the other legacy vga stuff.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_reg.h | 18 +-----------------
 1 file changed, 1 insertion(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 97fbd9d1823b..462b50a3d88e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -142,6 +142,7 @@
 #define   VGA_MSR_CGA_MODE (1<<0)
 
 #define VGA_SR_INDEX 0x3c4
+#define SR01			1
 #define VGA_SR_DATA 0x3c5
 
 #define VGA_AR_INDEX 0x3c0
@@ -938,23 +939,6 @@
 #define   DPLL_LOCK_VLV			(1<<15)
 #define   DPLL_INTEGRATED_CLOCK_VLV	(1<<13)
 
-#define SRX_INDEX		0x3c4
-#define SRX_DATA		0x3c5
-#define SR01			1
-#define SR01_SCREEN_OFF		(1<<5)
-
-#define PPCR			0x61204
-#define PPCR_ON			(1<<0)
-
-#define DVOB			0x61140
-#define DVOB_ON			(1<<31)
-#define DVOC			0x61160
-#define DVOC_ON			(1<<31)
-#define LVDS			0x61180
-#define LVDS_ON			(1<<31)
-
-/* Scratch pad debug 0 reg:
- */
 #define   DPLL_FPA01_P1_POST_DIV_MASK_I830	0x001f0000
 /*
  * The i830 generation, in LVDS mode, defines P1 as the bit number set within
-- 
cgit v1.2.3


From ca9c46c5c77987acf1bf7137bf85e9221bc459ba Mon Sep 17 00:00:00 2001
From: Ville Syrjälä
Date: Tue, 27 Nov 2012 20:34:58 +0200
Subject: drm/i915: Kill i915_gem_execbuffer_wait_for_flips()

As per Chris Wilson's suggestion make
i915_gem_execbuffer_wait_for_flips() go away.

This was used to stall the GPU ring while there are pending
page flips involving the relevant BO. Ie. while the BO is still
being scanned out by the display controller.

The recommended alternative is to use the page flip events to
wait for the page flips to fully complete before reusing the BO
of the old front buffer. Or use more buffers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: don't remove obj->pending_flips, still required due to
reorder patches.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem_execbuffer.c | 42 ------------------------------
 drivers/gpu/drm/i915/intel_display.c       |  7 -----
 2 files changed, 49 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index ee8f97f0539e..802d925b2b57 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -601,45 +601,12 @@ err:
 	return ret;
 }
 
-static int
-i915_gem_execbuffer_wait_for_flips(struct intel_ring_buffer *ring, u32 flips)
-{
-	u32 plane, flip_mask;
-	int ret;
-
-	/* Check for any pending flips. As we only maintain a flip queue depth
-	 * of 1, we can simply insert a WAIT for the next display flip prior
-	 * to executing the batch and avoid stalling the CPU.
-	 */
-
-	for (plane = 0; flips >> plane; plane++) {
-		if (((flips >> plane) & 1) == 0)
-			continue;
-
-		if (plane)
-			flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
-		else
-			flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
-
-		ret = intel_ring_begin(ring, 2);
-		if (ret)
-			return ret;
-
-		intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
-		intel_ring_emit(ring, MI_NOOP);
-		intel_ring_advance(ring);
-	}
-
-	return 0;
-}
-
 static int
 i915_gem_execbuffer_move_to_gpu(struct intel_ring_buffer *ring,
 				struct list_head *objects)
 {
 	struct drm_i915_gem_object *obj;
 	uint32_t flush_domains = 0;
-	uint32_t flips = 0;
 	int ret;
 
 	list_for_each_entry(obj, objects, exec_list) {
@@ -650,18 +617,9 @@ i915_gem_execbuffer_move_to_gpu(struct intel_ring_buffer *ring,
 		if (obj->base.write_domain & I915_GEM_DOMAIN_CPU)
 			i915_gem_clflush_object(obj);
 
-		if (obj->base.pending_write_domain)
-			flips |= atomic_read(&obj->pending_flip);
-
 		flush_domains |= obj->base.write_domain;
 	}
 
-	if (flips) {
-		ret = i915_gem_execbuffer_wait_for_flips(ring, flips);
-		if (ret)
-			return ret;
-	}
-
 	if (flush_domains & I915_GEM_DOMAIN_CPU)
 		i915_gem_chipset_flush(ring->dev);
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 78d12c471472..8cdf3a1226dc 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6945,8 +6945,6 @@ static void do_intel_finish_page_flip(struct drm_device *dev,
 
 	obj = work->old_fb_obj;
 
-	atomic_clear_mask(1 << intel_crtc->plane,
-			  &obj->pending_flip.counter);
 	wake_up(&dev_priv->pending_flip_queue);
 
 	queue_work(dev_priv->wq, &work->work);
@@ -7292,10 +7290,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 
 	work->enable_stall_check = true;
 
-	/* Block clients from rendering to the new back buffer until
-	 * the flip occurs and the object is no longer visible.
-	 */
-	atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
 	atomic_inc(&intel_crtc->unpin_work_count);
 
 	ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
@@ -7312,7 +7306,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 
 cleanup_pending:
 	atomic_dec(&intel_crtc->unpin_work_count);
-	atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
 	drm_gem_object_unreference(&work->old_fb_obj->base);
 	drm_gem_object_unreference(&obj->base);
 	mutex_unlock(&dev->struct_mutex);
-- 
cgit v1.2.3


From 04b97b3422c3403696f3bcb52140b7ebeaee9d3c Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Tue, 27 Nov 2012 17:06:53 +0000
Subject: drm/i915/debugfs: Prune a couple of superfluous leading zeros from bo
 domains

As we do not have any domains occupying the high bits, there is no point
in always printing the leading 00.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 8afc0dd7de64..62619e39533f 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -102,7 +102,7 @@ static const char *cache_level_str(int type)
 static void
 describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
 {
-	seq_printf(m, "%p: %s%s %8zdKiB %04x %04x %d %d %d%s%s%s",
+	seq_printf(m, "%p: %s%s %8zdKiB %02x %02x %d %d %d%s%s%s",
 		   &obj->base,
 		   get_pin_flag(obj),
 		   get_tiling_flag(obj),
@@ -608,7 +608,7 @@ static void print_error_buffers(struct seq_file *m,
 	seq_printf(m, "%s [%d]:\n", name, count);
 
 	while (count--) {
-		seq_printf(m, "  %08x %8u %04x %04x %x %x%s%s%s%s%s%s%s",
+		seq_printf(m, "  %08x %8u %02x %02x %x %x%s%s%s%s%s%s%s",
 			   err->gtt_offset,
 			   err->size,
 			   err->read_domains,
-- 
cgit v1.2.3


From dafd226c4f54eded10ba43c37789a6aa20b59c32 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Mon, 26 Nov 2012 17:22:07 +0100
Subject: drm/i915: add encoder->pre_pll_enable callback

Currently we have two encoder specific bits in the common mode_set
functions:
- lvds pin pair enabling
- dp m/n setting and computation

Now the lvds stuff needs to happen before the pll is enabled. Since
that is done in the crtc_mode_set functions, we need to add a new
callback to be able to move them to the encoder code (where they
belong). The dp m/n stuff is a giant mess anyway (since it also
confuses itself with the fdi link m/n handling), so that needs to be
handled separately.

I think that we can move the pll enabling down quite a bit, which
might allow us to eventually merge encoder->pre_enable with this new
pre_pll_enable callback. But for now this will allow us to clean
things up a bit.

Note that vlv doesn't support lvds, hence we don't need to change
anything in there.

v2: Fixup commit message, both suggested from Paulo Zanoni.
- dp m/n doesn't need to happen before pll enabling
- lvds doesn't exist on vlv, hence no changes required in the vlv pll
  function.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 14 ++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h     |  1 +
 2 files changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 8cdf3a1226dc..55d3e3dbc137 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4464,6 +4464,7 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 	u32 dpll;
 	bool is_sdvo;
@@ -4532,6 +4533,10 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
 	POSTING_READ(DPLL(pipe));
 	udelay(150);
 
+	for_each_encoder_on_crtc(dev, crtc, encoder)
+		if (encoder->pre_pll_enable)
+			encoder->pre_pll_enable(encoder);
+
 	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
 	 * This is an exception to the general rule that mode_set doesn't turn
 	 * things on.
@@ -4576,6 +4581,7 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 	u32 dpll;
 
@@ -4609,6 +4615,10 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
 	POSTING_READ(DPLL(pipe));
 	udelay(150);
 
+	for_each_encoder_on_crtc(dev, crtc, encoder)
+		if (encoder->pre_pll_enable)
+			encoder->pre_pll_enable(encoder);
+
 	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
 	 * This is an exception to the general rule that mode_set doesn't turn
 	 * things on.
@@ -5537,6 +5547,10 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		I915_WRITE(TRANSDPLINK_N1(pipe), 0);
 	}
 
+	for_each_encoder_on_crtc(dev, crtc, encoder)
+		if (encoder->pre_pll_enable)
+			encoder->pre_pll_enable(encoder);
+
 	if (intel_crtc->pch_pll) {
 		I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 522061ca0685..a74c572f1d5e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -153,6 +153,7 @@ struct intel_encoder {
 	bool cloneable;
 	bool connectors_active;
 	void (*hot_plug)(struct intel_encoder *);
+	void (*pre_pll_enable)(struct intel_encoder *);
 	void (*pre_enable)(struct intel_encoder *);
 	void (*enable)(struct intel_encoder *);
 	void (*disable)(struct intel_encoder *);
-- 
cgit v1.2.3


From a210b028f07690c127733addbbe137e8f4cad30c Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Mon, 26 Nov 2012 17:22:08 +0100
Subject: drm/i915: replace ad-hoc dual-link lvds checks

... with is_dual_link_lvds introduced in

commit b03543857fd75876b96e10d4320b775e95041bb7
Author: Takashi Iwai <tiwai@suse.de>
Date:   Tue Mar 20 13:07:05 2012 +0100

    drm/i915: Check VBIOS value for determining LVDS dual channel mode, too

All these checks predate this commit and have simply been overlooked.
Since we don't support switching between single-link and dual-link
modes anyway, this different checks could at best only get in the way
of refactorings, and in the worst case cause inconsistencies.

v2: Update the comment, we now have a solid way to figure out whether
we need dual-link lvds or not (falling back to vbt values as a last
resort). We still don't know how to switch between dual-link and
single link so leave that part intact. I'm not sure though whether
switching between these two modes makes any sense - we always drive
the panel at its fixed mode (with a fixed bpc) anyway ...

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 55d3e3dbc137..be19b6d1ca52 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -690,13 +690,11 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 	intel_clock_t clock;
 	int err = target;
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
-	    (I915_READ(LVDS)) != 0) {
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 		/*
-		 * For LVDS, if the panel is on, just rely on its current
-		 * settings for dual-channel.  We haven't figured out how to
-		 * reliably set up different single/dual channel state, if we
-		 * even can.
+		 * For LVDS just rely on its current settings for dual-channel.
+		 * We haven't figured out how to reliably set up different
+		 * single/dual channel state, if we even can.
 		 */
 		if (is_dual_link_lvds(dev_priv, LVDS))
 			clock.p2 = limit->p2.p2_fast;
@@ -766,8 +764,7 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			lvds_reg = PCH_LVDS;
 		else
 			lvds_reg = LVDS;
-		if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
-		    LVDS_CLKB_POWER_UP)
+		if (is_dual_link_lvds(dev_priv, lvds_reg))
 			clock.p2 = limit->p2.p2_fast;
 		else
 			clock.p2 = limit->p2.p2_slow;
@@ -5359,7 +5356,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 	if (is_lvds) {
 		if ((intel_panel_use_ssc(dev_priv) &&
 		     dev_priv->lvds_ssc_freq == 100) ||
-		    (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
+		    is_dual_link_lvds(dev_priv, PCH_LVDS))
 			factor = 25;
 	} else if (is_sdvo && is_tv)
 		factor = 20;
-- 
cgit v1.2.3


From 1974cad0ee4ce84e5cb792e49c4f0d9421e0312c Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Mon, 26 Nov 2012 17:22:09 +0100
Subject: drm/i915: move is_dual_link_lvds to intel_lvds.c

Just a prep patch to make this a property of intel_lvds. Makes more
sense, removes clutter from intel_display.c and eventually I want to
move all the encoder special cases wrt clock handling to encoders
anyway.

v2: Add an intel_ prefixe to is_dual_link_lvds since it's non-static
now.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 60 +++---------------------------------
 drivers/gpu/drm/i915/intel_drv.h     |  1 +
 drivers/gpu/drm/i915/intel_lvds.c    | 53 +++++++++++++++++++++++++++++++
 3 files changed, 59 insertions(+), 55 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index be19b6d1ca52..2705da329ddf 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -472,61 +472,14 @@ static void vlv_init_dpio(struct drm_device *dev)
 	POSTING_READ(DPIO_CTL);
 }
 
-static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
-{
-	DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident);
-	return 1;
-}
-
-static const struct dmi_system_id intel_dual_link_lvds[] = {
-	{
-		.callback = intel_dual_link_lvds_callback,
-		.ident = "Apple MacBook Pro (Core i5/i7 Series)",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
-		},
-	},
-	{ }	/* terminating entry */
-};
-
-static bool is_dual_link_lvds(struct drm_i915_private *dev_priv,
-			      unsigned int reg)
-{
-	unsigned int val;
-
-	/* use the module option value if specified */
-	if (i915_lvds_channel_mode > 0)
-		return i915_lvds_channel_mode == 2;
-
-	if (dmi_check_system(intel_dual_link_lvds))
-		return true;
-
-	if (dev_priv->lvds_val)
-		val = dev_priv->lvds_val;
-	else {
-		/* BIOS should set the proper LVDS register value at boot, but
-		 * in reality, it doesn't set the value when the lid is closed;
-		 * we need to check "the value to be set" in VBT when LVDS
-		 * register is uninitialized.
-		 */
-		val = I915_READ(reg);
-		if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
-			val = dev_priv->bios_lvds_val;
-		dev_priv->lvds_val = val;
-	}
-	return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
-}
-
 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
 						int refclk)
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	const intel_limit_t *limit;
 
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
-		if (is_dual_link_lvds(dev_priv, PCH_LVDS)) {
+		if (intel_is_dual_link_lvds(dev)) {
 			/* LVDS dual channel */
 			if (refclk == 100000)
 				limit = &intel_limits_ironlake_dual_lvds_100m;
@@ -550,11 +503,10 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	const intel_limit_t *limit;
 
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
-		if (is_dual_link_lvds(dev_priv, LVDS))
+		if (intel_is_dual_link_lvds(dev))
 			/* LVDS with dual channel */
 			limit = &intel_limits_g4x_dual_channel_lvds;
 		else
@@ -686,7 +638,6 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	intel_clock_t clock;
 	int err = target;
 
@@ -696,7 +647,7 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 		 * We haven't figured out how to reliably set up different
 		 * single/dual channel state, if we even can.
 		 */
-		if (is_dual_link_lvds(dev_priv, LVDS))
+		if (intel_is_dual_link_lvds(dev))
 			clock.p2 = limit->p2.p2_fast;
 		else
 			clock.p2 = limit->p2.p2_slow;
@@ -749,7 +700,6 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			intel_clock_t *best_clock)
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	intel_clock_t clock;
 	int max_n;
 	bool found;
@@ -764,7 +714,7 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			lvds_reg = PCH_LVDS;
 		else
 			lvds_reg = LVDS;
-		if (is_dual_link_lvds(dev_priv, lvds_reg))
+		if (intel_is_dual_link_lvds(dev))
 			clock.p2 = limit->p2.p2_fast;
 		else
 			clock.p2 = limit->p2.p2_slow;
@@ -5356,7 +5306,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 	if (is_lvds) {
 		if ((intel_panel_use_ssc(dev_priv) &&
 		     dev_priv->lvds_ssc_freq == 100) ||
-		    is_dual_link_lvds(dev_priv, PCH_LVDS))
+		    intel_is_dual_link_lvds(dev))
 			factor = 25;
 	} else if (is_sdvo && is_tv)
 		factor = 20;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index a74c572f1d5e..7ca7772eaccd 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -441,6 +441,7 @@ extern void intel_mark_idle(struct drm_device *dev);
 extern void intel_mark_fb_busy(struct drm_i915_gem_object *obj);
 extern void intel_mark_fb_idle(struct drm_i915_gem_object *obj);
 extern bool intel_lvds_init(struct drm_device *dev);
+extern bool intel_is_dual_link_lvds(struct drm_device *dev);
 extern void intel_dp_init(struct drm_device *dev, int output_reg,
 			  enum port port);
 extern void intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index b9a660a53677..4158a8839433 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -903,6 +903,59 @@ static bool lvds_is_present_in_vbt(struct drm_device *dev,
 	return false;
 }
 
+static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
+{
+	DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident);
+	return 1;
+}
+
+static const struct dmi_system_id intel_dual_link_lvds[] = {
+	{
+		.callback = intel_dual_link_lvds_callback,
+		.ident = "Apple MacBook Pro (Core i5/i7 Series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
+		},
+	},
+	{ }	/* terminating entry */
+};
+
+bool intel_is_dual_link_lvds(struct drm_device *dev)
+{
+	unsigned int val;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 lvds_reg;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		lvds_reg = PCH_LVDS;
+	} else {
+		lvds_reg = LVDS;
+	}
+
+	/* use the module option value if specified */
+	if (i915_lvds_channel_mode > 0)
+		return i915_lvds_channel_mode == 2;
+
+	if (dmi_check_system(intel_dual_link_lvds))
+		return true;
+
+	if (dev_priv->lvds_val)
+		val = dev_priv->lvds_val;
+	else {
+		/* BIOS should set the proper LVDS register value at boot, but
+		 * in reality, it doesn't set the value when the lid is closed;
+		 * we need to check "the value to be set" in VBT when LVDS
+		 * register is uninitialized.
+		 */
+		val = I915_READ(lvds_reg);
+		if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
+			val = dev_priv->bios_lvds_val;
+		dev_priv->lvds_val = val;
+	}
+	return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
+}
+
 static bool intel_lvds_supported(struct drm_device *dev)
 {
 	/* With the introduction of the PCH we gained a dedicated
-- 
cgit v1.2.3


From 13c7d8703127334890c894ddab13b3a92a26580a Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Mon, 26 Nov 2012 17:22:10 +0100
Subject: drm/i915: track is_dual_link in intel_lvds

Yeah, all users (both the clock selection special cases and the lvds
pin pair stuff) are still in common code, but this will change.

v2: Rebase on top of Jani Nikula's panel rework.

v3: Incorporate review from Paulo Zanoni:
- s/__is_dual_link_lvds/compute_is_dual_link_lvds
- kill dev_priv->lvds_val
- drop spurious whitespace change

v4: Add a debug printk to display the dual-link status, as suggested
by Paulo Zanoni in review.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v3)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h   |  1 -
 drivers/gpu/drm/i915/intel_lvds.c | 44 +++++++++++++++++++++++++++------------
 2 files changed, 31 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 79589bbff3db..9be7efd43c6a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -705,7 +705,6 @@ typedef struct drm_i915_private {
 	unsigned int display_clock_mode:1;
 	int lvds_ssc_freq;
 	unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
-	unsigned int lvds_val; /* used for checking LVDS channel mode */
 	struct {
 		int rate;
 		int lanes;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 4158a8839433..31fdbfd48e44 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -52,6 +52,7 @@ struct intel_lvds_encoder {
 	u32 pfit_control;
 	u32 pfit_pgm_ratios;
 	bool pfit_dirty;
+	bool is_dual_link;
 
 	struct intel_lvds_connector *attached_connector;
 };
@@ -922,6 +923,23 @@ static const struct dmi_system_id intel_dual_link_lvds[] = {
 };
 
 bool intel_is_dual_link_lvds(struct drm_device *dev)
+{
+	struct intel_encoder *encoder;
+	struct intel_lvds_encoder *lvds_encoder;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list,
+			    base.head) {
+		if (encoder->type == INTEL_OUTPUT_LVDS) {
+			lvds_encoder = to_lvds_encoder(&encoder->base);
+
+			return lvds_encoder->is_dual_link;
+		}
+	}
+
+	return false;
+}
+
+static bool compute_is_dual_link_lvds(struct drm_device *dev)
 {
 	unsigned int val;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -940,19 +958,15 @@ bool intel_is_dual_link_lvds(struct drm_device *dev)
 	if (dmi_check_system(intel_dual_link_lvds))
 		return true;
 
-	if (dev_priv->lvds_val)
-		val = dev_priv->lvds_val;
-	else {
-		/* BIOS should set the proper LVDS register value at boot, but
-		 * in reality, it doesn't set the value when the lid is closed;
-		 * we need to check "the value to be set" in VBT when LVDS
-		 * register is uninitialized.
-		 */
-		val = I915_READ(lvds_reg);
-		if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
-			val = dev_priv->bios_lvds_val;
-		dev_priv->lvds_val = val;
-	}
+	/* BIOS should set the proper LVDS register value at boot, but
+	 * in reality, it doesn't set the value when the lid is closed;
+	 * we need to check "the value to be set" in VBT when LVDS
+	 * register is uninitialized.
+	 */
+	val = I915_READ(lvds_reg);
+	if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
+		val = dev_priv->bios_lvds_val;
+
 	return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
 }
 
@@ -1162,6 +1176,10 @@ bool intel_lvds_init(struct drm_device *dev)
 		goto failed;
 
 out:
+	lvds_encoder->is_dual_link = compute_is_dual_link_lvds(dev);
+	DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
+		      lvds_encoder->is_dual_link ? "dual" : "single");
+
 	/*
 	 * Unlock registers and just
 	 * leave them unlocked
-- 
cgit v1.2.3


From 7dec060675125f17a547950d715018a63131a437 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Tue, 11 Sep 2012 14:12:25 +0200
Subject: drm/i915: add intel_lvds->reg

To ditch at least some of the PCH_SPLIT ? PCH_LVDS : LVDS code ...

v2: Rebase on top of Jani Nikula's panel rework.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_lvds.c | 48 ++++++++++++++++-----------------------
 1 file changed, 20 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 31fdbfd48e44..6b6ed642b29f 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -53,6 +53,7 @@ struct intel_lvds_encoder {
 	u32 pfit_pgm_ratios;
 	bool pfit_dirty;
 	bool is_dual_link;
+	u32 reg;
 
 	struct intel_lvds_connector *attached_connector;
 };
@@ -72,15 +73,10 @@ static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
 {
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 lvds_reg, tmp;
-
-	if (HAS_PCH_SPLIT(dev)) {
-		lvds_reg = PCH_LVDS;
-	} else {
-		lvds_reg = LVDS;
-	}
+	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
+	u32 tmp;
 
-	tmp = I915_READ(lvds_reg);
+	tmp = I915_READ(lvds_encoder->reg);
 
 	if (!(tmp & LVDS_PORT_EN))
 		return false;
@@ -102,19 +98,17 @@ static void intel_enable_lvds(struct intel_encoder *encoder)
 	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 ctl_reg, lvds_reg, stat_reg;
+	u32 ctl_reg, stat_reg;
 
 	if (HAS_PCH_SPLIT(dev)) {
 		ctl_reg = PCH_PP_CONTROL;
-		lvds_reg = PCH_LVDS;
 		stat_reg = PCH_PP_STATUS;
 	} else {
 		ctl_reg = PP_CONTROL;
-		lvds_reg = LVDS;
 		stat_reg = PP_STATUS;
 	}
 
-	I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
+	I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) | LVDS_PORT_EN);
 
 	if (lvds_encoder->pfit_dirty) {
 		/*
@@ -133,7 +127,7 @@ static void intel_enable_lvds(struct intel_encoder *encoder)
 	}
 
 	I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
-	POSTING_READ(lvds_reg);
+	POSTING_READ(lvds_encoder->reg);
 	if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000))
 		DRM_ERROR("timed out waiting for panel to power on\n");
 
@@ -145,15 +139,13 @@ static void intel_disable_lvds(struct intel_encoder *encoder)
 	struct drm_device *dev = encoder->base.dev;
 	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 ctl_reg, lvds_reg, stat_reg;
+	u32 ctl_reg, stat_reg;
 
 	if (HAS_PCH_SPLIT(dev)) {
 		ctl_reg = PCH_PP_CONTROL;
-		lvds_reg = PCH_LVDS;
 		stat_reg = PCH_PP_STATUS;
 	} else {
 		ctl_reg = PP_CONTROL;
-		lvds_reg = LVDS;
 		stat_reg = PP_STATUS;
 	}
 
@@ -168,8 +160,8 @@ static void intel_disable_lvds(struct intel_encoder *encoder)
 		lvds_encoder->pfit_dirty = true;
 	}
 
-	I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
-	POSTING_READ(lvds_reg);
+	I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) & ~LVDS_PORT_EN);
+	POSTING_READ(lvds_encoder->reg);
 }
 
 static int intel_lvds_mode_valid(struct drm_connector *connector,
@@ -939,17 +931,11 @@ bool intel_is_dual_link_lvds(struct drm_device *dev)
 	return false;
 }
 
-static bool compute_is_dual_link_lvds(struct drm_device *dev)
+static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
 {
+	struct drm_device *dev = lvds_encoder->base.base.dev;
 	unsigned int val;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 lvds_reg;
-
-	if (HAS_PCH_SPLIT(dev)) {
-		lvds_reg = PCH_LVDS;
-	} else {
-		lvds_reg = LVDS;
-	}
 
 	/* use the module option value if specified */
 	if (i915_lvds_channel_mode > 0)
@@ -963,7 +949,7 @@ static bool compute_is_dual_link_lvds(struct drm_device *dev)
 	 * we need to check "the value to be set" in VBT when LVDS
 	 * register is uninitialized.
 	 */
-	val = I915_READ(lvds_reg);
+	val = I915_READ(lvds_encoder->reg);
 	if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
 		val = dev_priv->bios_lvds_val;
 
@@ -1076,6 +1062,12 @@ bool intel_lvds_init(struct drm_device *dev)
 	connector->interlace_allowed = false;
 	connector->doublescan_allowed = false;
 
+	if (HAS_PCH_SPLIT(dev)) {
+		lvds_encoder->reg = PCH_LVDS;
+	} else {
+		lvds_encoder->reg = LVDS;
+	}
+
 	/* create the scaling mode property */
 	drm_mode_create_scaling_mode_property(dev);
 	drm_object_attach_property(&connector->base,
@@ -1176,7 +1168,7 @@ bool intel_lvds_init(struct drm_device *dev)
 		goto failed;
 
 out:
-	lvds_encoder->is_dual_link = compute_is_dual_link_lvds(dev);
+	lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder);
 	DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
 		      lvds_encoder->is_dual_link ? "dual" : "single");
 
-- 
cgit v1.2.3


From fc683091eb57692679f629784f42dce453877430 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Mon, 26 Nov 2012 17:22:12 +0100
Subject: drm/i915: move intel_update_lvds to intel_lvds->pre_pll_enable

A few things needed to change:
- HAS_PCH_SPLIT since ilk+ is not yet converted to this.
- s/LVDS/intel_lvds->reg/ to prep for ilk conversion
- replace the clock.p2 == 7 check with a is_dual_link check
- s/adjusted_mode/intel_lvds->fixed_mode

v2: Rebase on top of Jani Nikula's panel rework. I'm wondering whether
we shouldn't add an attached_panel pointer to intel_encoder, to
replace the encoder private ->attached_connector pointers, since
that's essentially what we need.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 59 ------------------------------------
 drivers/gpu/drm/i915/intel_lvds.c    | 57 ++++++++++++++++++++++++++++++++++
 2 files changed, 57 insertions(+), 59 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 2705da329ddf..bb080fbde808 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4257,51 +4257,6 @@ static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
 	}
 }
 
-static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock,
-			      struct drm_display_mode *adjusted_mode)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
-	u32 temp;
-
-	temp = I915_READ(LVDS);
-	temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
-	if (pipe == 1) {
-		temp |= LVDS_PIPEB_SELECT;
-	} else {
-		temp &= ~LVDS_PIPEB_SELECT;
-	}
-	/* set the corresponsding LVDS_BORDER bit */
-	temp |= dev_priv->lvds_border_bits;
-	/* Set the B0-B3 data pairs corresponding to whether we're going to
-	 * set the DPLLs for dual-channel mode or not.
-	 */
-	if (clock->p2 == 7)
-		temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
-	else
-		temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
-
-	/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
-	 * appropriately here, but we need to look more thoroughly into how
-	 * panels behave in the two modes.
-	 */
-	/* set the dithering flag on LVDS as needed */
-	if (INTEL_INFO(dev)->gen >= 4) {
-		if (dev_priv->lvds_dither)
-			temp |= LVDS_ENABLE_DITHER;
-		else
-			temp &= ~LVDS_ENABLE_DITHER;
-	}
-	temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
-	if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
-		temp |= LVDS_HSYNC_POLARITY;
-	if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
-		temp |= LVDS_VSYNC_POLARITY;
-	I915_WRITE(LVDS, temp);
-}
-
 static void vlv_update_pll(struct drm_crtc *crtc,
 			   struct drm_display_mode *mode,
 			   struct drm_display_mode *adjusted_mode,
@@ -4484,13 +4439,6 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
 		if (encoder->pre_pll_enable)
 			encoder->pre_pll_enable(encoder);
 
-	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
-	 * This is an exception to the general rule that mode_set doesn't turn
-	 * things on.
-	 */
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-		intel_update_lvds(crtc, clock, adjusted_mode);
-
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
 
@@ -4566,13 +4514,6 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
 		if (encoder->pre_pll_enable)
 			encoder->pre_pll_enable(encoder);
 
-	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
-	 * This is an exception to the general rule that mode_set doesn't turn
-	 * things on.
-	 */
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-		intel_update_lvds(crtc, clock, adjusted_mode);
-
 	I915_WRITE(DPLL(pipe), dpll);
 
 	/* Wait for the clocks to stabilize. */
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6b6ed642b29f..c93ec03974d6 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -89,6 +89,62 @@ static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
 	return true;
 }
 
+/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder)
+{
+	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+	struct drm_display_mode *fixed_mode =
+		lvds_encoder->attached_connector->base.panel.fixed_mode;
+	int pipe = intel_crtc->pipe;
+	u32 temp;
+
+	/* pch split platforms are not yet converted. */
+	if (HAS_PCH_SPLIT(dev))
+		return;
+
+	temp = I915_READ(lvds_encoder->reg);
+	temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+	if (pipe == 1) {
+		temp |= LVDS_PIPEB_SELECT;
+	} else {
+		temp &= ~LVDS_PIPEB_SELECT;
+	}
+	/* set the corresponsding LVDS_BORDER bit */
+	temp |= dev_priv->lvds_border_bits;
+	/* Set the B0-B3 data pairs corresponding to whether we're going to
+	 * set the DPLLs for dual-channel mode or not.
+	 */
+	if (lvds_encoder->is_dual_link)
+		temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+	else
+		temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+	/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+	 * appropriately here, but we need to look more thoroughly into how
+	 * panels behave in the two modes.
+	 */
+	/* set the dithering flag on LVDS as needed */
+	if (INTEL_INFO(dev)->gen >= 4) {
+		if (dev_priv->lvds_dither)
+			temp |= LVDS_ENABLE_DITHER;
+		else
+			temp &= ~LVDS_ENABLE_DITHER;
+	}
+	temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+	if (fixed_mode->flags & DRM_MODE_FLAG_NHSYNC)
+		temp |= LVDS_HSYNC_POLARITY;
+	if (fixed_mode->flags & DRM_MODE_FLAG_NVSYNC)
+		temp |= LVDS_VSYNC_POLARITY;
+
+	I915_WRITE(lvds_encoder->reg, temp);
+}
+
 /**
  * Sets the power state for the panel.
  */
@@ -1041,6 +1097,7 @@ bool intel_lvds_init(struct drm_device *dev)
 			 DRM_MODE_ENCODER_LVDS);
 
 	intel_encoder->enable = intel_enable_lvds;
+	intel_encoder->pre_pll_enable = intel_pre_pll_enable_lvds;
 	intel_encoder->disable = intel_disable_lvds;
 	intel_encoder->get_hw_state = intel_lvds_get_hw_state;
 	intel_connector->get_hw_state = intel_connector_get_hw_state;
-- 
cgit v1.2.3


From 62810e5a9df3f47b7261e5d78fc1c33e550f2171 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Mon, 26 Nov 2012 17:22:13 +0100
Subject: drm/i915: enable intel_lvds->pre_pll_enable for ilk+, too

Only two things needed adjustment:
- pipe select for PCH_CPT
- There's no dithering bit on ilk+ in the lvds ctl reg

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 40 ------------------------------------
 drivers/gpu/drm/i915/intel_lvds.c    | 24 ++++++++++++++--------
 2 files changed, 15 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bb080fbde808..5958b3bd8650 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5322,7 +5322,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	bool ok, has_reduced_clock = false;
 	bool is_lvds = false, is_dp = false, is_cpu_edp = false;
 	struct intel_encoder *encoder;
-	u32 temp;
 	int ret;
 	bool dither, fdi_config_ok;
 
@@ -5386,45 +5385,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	} else
 		intel_put_pch_pll(intel_crtc);
 
-	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
-	 * This is an exception to the general rule that mode_set doesn't turn
-	 * things on.
-	 */
-	if (is_lvds) {
-		temp = I915_READ(PCH_LVDS);
-		temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
-		if (HAS_PCH_CPT(dev)) {
-			temp &= ~PORT_TRANS_SEL_MASK;
-			temp |= PORT_TRANS_SEL_CPT(pipe);
-		} else {
-			if (pipe == 1)
-				temp |= LVDS_PIPEB_SELECT;
-			else
-				temp &= ~LVDS_PIPEB_SELECT;
-		}
-
-		/* set the corresponsding LVDS_BORDER bit */
-		temp |= dev_priv->lvds_border_bits;
-		/* Set the B0-B3 data pairs corresponding to whether we're going to
-		 * set the DPLLs for dual-channel mode or not.
-		 */
-		if (clock.p2 == 7)
-			temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
-		else
-			temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
-
-		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
-		 * appropriately here, but we need to look more thoroughly into how
-		 * panels behave in the two modes.
-		 */
-		temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
-		if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
-			temp |= LVDS_HSYNC_POLARITY;
-		if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
-			temp |= LVDS_VSYNC_POLARITY;
-		I915_WRITE(PCH_LVDS, temp);
-	}
-
 	if (is_dp && !is_cpu_edp) {
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
 	} else {
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index c93ec03974d6..778106961e80 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -104,17 +104,20 @@ static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder)
 	int pipe = intel_crtc->pipe;
 	u32 temp;
 
-	/* pch split platforms are not yet converted. */
-	if (HAS_PCH_SPLIT(dev))
-		return;
-
 	temp = I915_READ(lvds_encoder->reg);
 	temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
-	if (pipe == 1) {
-		temp |= LVDS_PIPEB_SELECT;
+
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~PORT_TRANS_SEL_MASK;
+		temp |= PORT_TRANS_SEL_CPT(pipe);
 	} else {
-		temp &= ~LVDS_PIPEB_SELECT;
+		if (pipe == 1) {
+			temp |= LVDS_PIPEB_SELECT;
+		} else {
+			temp &= ~LVDS_PIPEB_SELECT;
+		}
 	}
+
 	/* set the corresponsding LVDS_BORDER bit */
 	temp |= dev_priv->lvds_border_bits;
 	/* Set the B0-B3 data pairs corresponding to whether we're going to
@@ -129,8 +132,11 @@ static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder)
 	 * appropriately here, but we need to look more thoroughly into how
 	 * panels behave in the two modes.
 	 */
-	/* set the dithering flag on LVDS as needed */
-	if (INTEL_INFO(dev)->gen >= 4) {
+
+	/* Set the dithering flag on LVDS as needed, note that there is no
+	 * special lvds dither control bit on pch-split platforms, dithering is
+	 * only controlled through the PIPECONF reg. */
+	if (INTEL_INFO(dev)->gen == 4) {
 		if (dev_priv->lvds_dither)
 			temp |= LVDS_ENABLE_DITHER;
 		else
-- 
cgit v1.2.3


From a39a68054f63da0ea3b4806e1bfad79670a93d9f Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Thu, 15 Nov 2012 15:40:05 +0100
Subject: drm/i915: simplify shmem pwrite/pread slowpath handling

The shmem paths for pwrite/pread used a clever trick to hold onto a
single page when dropping the big dev->struct_mutex for the slowpath.
But this ran the risk of reinstating (or not completely purging) the
backing storage when dropping purgeable objects.

Hence the code needed to keep track of whether it ever dropped the
lock, and if it did, manually check whether it needs to re-purge the
backing storage. But thanks to the pages pin count introduced in

commit a5570178c059cec59e9835be20bc8546377fa7b5
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Sep 4 21:02:54 2012 +0100

    drm/i915: Pin backing pages whilst exporting through a dmabuf vmap

which allowed us to pin the backing storage and remove that page
reference trick from shmem_pwrite/read in

commit f60d7f0c1d55a935475ab394955cafddefaa6533
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Sep 4 21:02:56 2012 +0100

    drm/i915: Pin backing pages for pread

and

commit 755d22184f1e5015b040acee794542d9cf8a16c5
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Sep 4 21:02:55 2012 +0100

    drm/i915: Pin backing pages for pwrite

we can now abolish this check. The slowpath cleanup completely
disappears from pread, and for pwrite we're only left with the domain
fixup in case someone moved the object out of the cpu domain from
under us. A follow-on patch will optimize that a notch more.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem.c | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 4ef8b5714337..36f629a79d88 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -407,7 +407,6 @@ i915_gem_shmem_pread(struct drm_device *dev,
 	loff_t offset;
 	int shmem_page_offset, page_length, ret = 0;
 	int obj_do_bit17_swizzling, page_do_bit17_swizzling;
-	int hit_slowpath = 0;
 	int prefaulted = 0;
 	int needs_clflush = 0;
 	struct scatterlist *sg;
@@ -469,7 +468,6 @@ i915_gem_shmem_pread(struct drm_device *dev,
 		if (ret == 0)
 			goto next_page;
 
-		hit_slowpath = 1;
 		mutex_unlock(&dev->struct_mutex);
 
 		if (!prefaulted) {
@@ -502,12 +500,6 @@ next_page:
 out:
 	i915_gem_object_unpin_pages(obj);
 
-	if (hit_slowpath) {
-		/* Fixup: Kill any reinstated backing storage pages */
-		if (obj->madv == __I915_MADV_PURGED)
-			i915_gem_object_truncate(obj);
-	}
-
 	return ret;
 }
 
@@ -838,11 +830,8 @@ out:
 	i915_gem_object_unpin_pages(obj);
 
 	if (hit_slowpath) {
-		/* Fixup: Kill any reinstated backing storage pages */
-		if (obj->madv == __I915_MADV_PURGED)
-			i915_gem_object_truncate(obj);
-		/* and flush dirty cachelines in case the object isn't in the cpu write
-		 * domain anymore. */
+		/* Fixup: Flush dirty cachelines in case the object isn't in the
+		 * cpu write domain anymore. */
 		if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
 			i915_gem_clflush_object(obj);
 			i915_gem_chipset_flush(dev);
-- 
cgit v1.2.3


From 8dcf015eb967c718962c0690330d9a94d56f2c5d Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Thu, 15 Nov 2012 16:53:58 +0100
Subject: drm/i915: optimize the shmem_pwrite slowpath handling

Since we drop dev->struct_mutex when going through the slowpath, the
object might have been moved out of the cpu domain. Hence we need to
clflush the entire object to ensure that after the ioctl returns,
everything is coherent again (interwoven writes are ill-defined
anyway).

But we only need to do this if we start in the cpu domain and the
object requires flushing for coherency. So don't do the flushing if
the object is coherent anyway or if we've done in-line clfushing
already.

v2: i915_gem_clflush_object already checks whether the object is
coherent and if so, drops the flushing. Hence we don't need to check
that ourselves, simplifying the condition.

v3: Reorder the checks for better clarity (and adjust the comment
accordingly), suggested by Chris Wilson.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 36f629a79d88..5c8df572cd17 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -830,9 +830,13 @@ out:
 	i915_gem_object_unpin_pages(obj);
 
 	if (hit_slowpath) {
-		/* Fixup: Flush dirty cachelines in case the object isn't in the
-		 * cpu write domain anymore. */
-		if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
+		/*
+		 * Fixup: Flush cpu caches in case we didn't flush the dirty
+		 * cachelines in-line while writing and the object moved
+		 * out of the cpu write domain while we've dropped the lock.
+		 */
+		if (!needs_clflush_after &&
+		    obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
 			i915_gem_clflush_object(obj);
 			i915_gem_chipset_flush(dev);
 		}
-- 
cgit v1.2.3


From c1f63f9d688e68088ef743a48a3aa8e0dc01a160 Mon Sep 17 00:00:00 2001
From: Paulo Zanoni
Date: Fri, 23 Nov 2012 15:30:37 -0200
Subject: drm/i915: intel_prepare_ddi_buffers should be static

It's not even declared on header files.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_ddi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 852012b6fc5b..16d3e7854ced 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -84,7 +84,8 @@ static enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder)
  * in either FDI or DP modes only, as HDMI connections will work with both
  * of those
  */
-void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port, bool use_fdi_mode)
+static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port,
+				      bool use_fdi_mode)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 reg;
-- 
cgit v1.2.3


From 20749730e39bba1c6100bec0e0d1a45c99db559e Mon Sep 17 00:00:00 2001
From: Paulo Zanoni
Date: Fri, 23 Nov 2012 15:30:38 -0200
Subject: drm/i915: remove Haswell code from ironlake_fdi_pll_enable

This function is not called on Haswell anymore.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5958b3bd8650..511b397b5aaa 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2787,18 +2787,14 @@ static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
 	POSTING_READ(reg);
 	udelay(200);
 
-	/* On Haswell, the PLL configuration for ports and pipes is handled
-	 * separately, as part of DDI setup */
-	if (!IS_HASWELL(dev)) {
-		/* Enable CPU FDI TX PLL, always on for Ironlake */
-		reg = FDI_TX_CTL(pipe);
-		temp = I915_READ(reg);
-		if ((temp & FDI_TX_PLL_ENABLE) == 0) {
-			I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
+	/* Enable CPU FDI TX PLL, always on for Ironlake */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+		I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
 
-			POSTING_READ(reg);
-			udelay(100);
-		}
+		POSTING_READ(reg);
+		udelay(100);
 	}
 }
 
-- 
cgit v1.2.3


From affa935440733a79c5a9eb0e5357e2564ca4b355 Mon Sep 17 00:00:00 2001
From: Paulo Zanoni
Date: Fri, 23 Nov 2012 15:30:39 -0200
Subject: drm/i915: add HAS_DDI check

And use it whenever we call code that uses the DDIs. We already have
intel_ddi.c and prefix every function with intel_ddi_something instead of
haswell_something, so I think replacing the checks with HAS_DDI makes more
sense. Just a cosmetical change, yes I know, but I have this OCD...

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h      |  2 ++
 drivers/gpu/drm/i915/intel_crt.c     |  2 +-
 drivers/gpu/drm/i915/intel_ddi.c     |  2 +-
 drivers/gpu/drm/i915/intel_display.c | 19 +++++++++----------
 drivers/gpu/drm/i915/intel_dp.c      |  8 ++++----
 drivers/gpu/drm/i915/intel_hdmi.c    |  4 ++--
 6 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 9be7efd43c6a..e908c498ed87 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1208,6 +1208,8 @@ struct drm_i915_file_private {
 
 #define HAS_PIPE_CONTROL(dev) (INTEL_INFO(dev)->gen >= 5)
 
+#define HAS_DDI(dev)		(IS_HASWELL(dev))
+
 #define INTEL_PCH_DEVICE_ID_MASK		0xff00
 #define INTEL_PCH_IBX_DEVICE_ID_TYPE		0x3b00
 #define INTEL_PCH_CPT_DEVICE_ID_TYPE		0x1c00
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 5c7774396e10..bc07b3f0d5e7 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -771,7 +771,7 @@ void intel_crt_init(struct drm_device *dev)
 
 	crt->base.disable = intel_disable_crt;
 	crt->base.enable = intel_enable_crt;
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		crt->base.get_hw_state = intel_ddi_get_hw_state;
 	else
 		crt->base.get_hw_state = intel_crt_get_hw_state;
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 16d3e7854ced..197dede1870a 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -115,7 +115,7 @@ void intel_prepare_ddi(struct drm_device *dev)
 {
 	int port;
 
-	if (IS_HASWELL(dev)) {
+	if (HAS_DDI(dev)) {
 		for (port = PORT_A; port < PORT_E; port++)
 			intel_prepare_ddi_buffers(dev, port, false);
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 511b397b5aaa..52b6b0e811bc 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1072,8 +1072,8 @@ static void assert_fdi_tx(struct drm_i915_private *dev_priv,
 	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
 								      pipe);
 
-	if (IS_HASWELL(dev_priv->dev)) {
-		/* On Haswell, DDI is used instead of FDI_TX_CTL */
+	if (HAS_DDI(dev_priv->dev)) {
+		/* DDI does not have a specific FDI_TX register */
 		reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
 		val = I915_READ(reg);
 		cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
@@ -1117,7 +1117,7 @@ static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
 		return;
 
 	/* On Haswell, DDI ports are responsible for the FDI PLL setup */
-	if (IS_HASWELL(dev_priv->dev))
+	if (HAS_DDI(dev_priv->dev))
 		return;
 
 	reg = FDI_TX_CTL(pipe);
@@ -7976,7 +7976,7 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
 
 static void intel_cpu_pll_init(struct drm_device *dev)
 {
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		intel_ddi_pll_init(dev);
 }
 
@@ -8112,11 +8112,10 @@ static void intel_setup_outputs(struct drm_device *dev)
 		I915_WRITE(PFIT_CONTROL, 0);
 	}
 
-	if (!(IS_HASWELL(dev) &&
-	      (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)))
+	if (!(HAS_DDI(dev) && (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)))
 		intel_crt_init(dev);
 
-	if (IS_HASWELL(dev)) {
+	if (HAS_DDI(dev)) {
 		int found;
 
 		/* Haswell uses DDI functions to detect digital outputs */
@@ -8360,7 +8359,7 @@ static void intel_init_display(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	/* We always want a DPMS function */
-	if (IS_HASWELL(dev)) {
+	if (HAS_DDI(dev)) {
 		dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
 		dev_priv->display.crtc_enable = haswell_crtc_enable;
 		dev_priv->display.crtc_disable = haswell_crtc_disable;
@@ -8849,7 +8848,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 	struct intel_encoder *encoder;
 	struct intel_connector *connector;
 
-	if (IS_HASWELL(dev)) {
+	if (HAS_DDI(dev)) {
 		tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
 
 		if (tmp & TRANS_DDI_FUNC_ENABLE) {
@@ -8890,7 +8889,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 			      crtc->active ? "enabled" : "disabled");
 	}
 
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		intel_ddi_setup_hw_pll_state(dev);
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list,
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index d76258dcb8f8..f2904380a6f6 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -379,7 +379,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 	 * clock divider.
 	 */
 	if (is_cpu_edp(intel_dp)) {
-		if (IS_HASWELL(dev))
+		if (HAS_DDI(dev))
 			aux_clock_divider = intel_ddi_get_cdclk_freq(dev_priv) >> 1;
 		else if (IS_VALLEYVIEW(dev))
 			aux_clock_divider = 100;
@@ -1791,7 +1791,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 	int voltage_tries, loop_tries;
 	uint32_t DP = intel_dp->DP;
 
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		intel_ddi_prepare_link_retrain(encoder);
 
 	/* Write the link configuration data */
@@ -1981,7 +1981,7 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 	 *   intel_ddi_prepare_link_retrain will take care of redoing the link
 	 *   train.
 	 */
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		return;
 
 	if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0))
@@ -2742,7 +2742,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	intel_connector_attach_encoder(intel_connector, intel_encoder);
 	drm_sysfs_connector_add(connector);
 
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
 	else
 		intel_connector->get_hw_state = intel_connector_get_hw_state;
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 2ee9821b9d93..53df0a88a6a8 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -48,7 +48,7 @@ assert_hdmi_port_disabled(struct intel_hdmi *intel_hdmi)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t enabled_bits;
 
-	enabled_bits = IS_HASWELL(dev) ? DDI_BUF_CTL_ENABLE : SDVO_ENABLE;
+	enabled_bits = HAS_DDI(dev) ? DDI_BUF_CTL_ENABLE : SDVO_ENABLE;
 
 	WARN(I915_READ(intel_hdmi->sdvox_reg) & enabled_bits,
 	     "HDMI port enabled, expecting disabled\n");
@@ -1013,7 +1013,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 		intel_hdmi->set_infoframes = cpt_set_infoframes;
 	}
 
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
 	else
 		intel_connector->get_hw_state = intel_connector_get_hw_state;
-- 
cgit v1.2.3


From 0d536cb4e911c2496073f268e9730a9badaafa55 Mon Sep 17 00:00:00 2001
From: Paulo Zanoni
Date: Fri, 23 Nov 2012 16:46:41 -0200
Subject: drm/i915: invert the log inside intel_prepare_ddi

Do an early return in case we don't have DDI instead of having the
whole function inside an "if" statement.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_ddi.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 197dede1870a..ad936c68e4cb 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -115,16 +115,17 @@ void intel_prepare_ddi(struct drm_device *dev)
 {
 	int port;
 
-	if (HAS_DDI(dev)) {
-		for (port = PORT_A; port < PORT_E; port++)
-			intel_prepare_ddi_buffers(dev, port, false);
+	if (!HAS_DDI(dev))
+		return;
 
-		/* DDI E is the suggested one to work in FDI mode, so program is as such by
-		 * default. It will have to be re-programmed in case a digital DP output
-		 * will be detected on it
-		 */
-		intel_prepare_ddi_buffers(dev, PORT_E, true);
-	}
+	for (port = PORT_A; port < PORT_E; port++)
+		intel_prepare_ddi_buffers(dev, port, false);
+
+	/* DDI E is the suggested one to work in FDI mode, so program is as such
+	 * by default. It will have to be re-programmed in case a digital DP
+	 * output will be detected on it
+	 */
+	intel_prepare_ddi_buffers(dev, PORT_E, true);
 }
 
 static const long hsw_ddi_buf_ctl_values[] = {
-- 
cgit v1.2.3


From 9fa5f6522e6eecb5ab20192a264a29ba4f2f4e85 Mon Sep 17 00:00:00 2001
From: Paulo Zanoni
Date: Thu, 29 Nov 2012 11:31:29 -0200
Subject: drm/i915: kill intel_dp_link_clock()

Use drm_dp_bw_code_to_link_rate insead. It's the same thing, but
supports DP_LINK_BW_5_4 and is also used by the other drivers.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index f2904380a6f6..b51043e651b5 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -148,15 +148,6 @@ intel_dp_max_link_bw(struct intel_dp *intel_dp)
 	return max_link_bw;
 }
 
-static int
-intel_dp_link_clock(uint8_t link_bw)
-{
-	if (link_bw == DP_LINK_BW_2_7)
-		return 270000;
-	else
-		return 162000;
-}
-
 /*
  * The units on the numbers in the next two are... bizarre.  Examples will
  * make it clearer; this one parallels an example in the eDP spec.
@@ -191,7 +182,8 @@ intel_dp_adjust_dithering(struct intel_dp *intel_dp,
 			  struct drm_display_mode *mode,
 			  bool adjust_mode)
 {
-	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
+	int max_link_clock =
+		drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp));
 	int max_lanes = drm_dp_max_lane_count(intel_dp->dpcd);
 	int max_rate, mode_rate;
 
@@ -722,12 +714,15 @@ intel_dp_mode_fixup(struct drm_encoder *encoder,
 
 	for (clock = 0; clock <= max_clock; clock++) {
 		for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
-			int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
+			int link_bw_clock =
+				drm_dp_bw_code_to_link_rate(bws[clock]);
+			int link_avail = intel_dp_max_data_rate(link_bw_clock,
+								lane_count);
 
 			if (mode_rate <= link_avail) {
 				intel_dp->link_bw = bws[clock];
 				intel_dp->lane_count = lane_count;
-				adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
+				adjusted_mode->clock = link_bw_clock;
 				DRM_DEBUG_KMS("DP link bw %02x lane "
 						"count %d clock %d bpp %d\n",
 				       intel_dp->link_bw, intel_dp->lane_count,
-- 
cgit v1.2.3


From 99057c81037ee45e94e5c7e6b403b73caccbaf9e Mon Sep 17 00:00:00 2001
From: Luis R. Rodriguez
Date: Thu, 29 Nov 2012 12:45:06 -0800
Subject: i915: convert struct spinlock to spinlock_t

spinlock_t should always be used.

  LD      drivers/gpu/drm/i915/built-in.o
  CHECK   drivers/gpu/drm/i915/i915_drv.c
  CC [M]  drivers/gpu/drm/i915/i915_drv.o
  CHECK   drivers/gpu/drm/i915/i915_dma.c
  CC [M]  drivers/gpu/drm/i915/i915_dma.o
  CHECK   drivers/gpu/drm/i915/i915_irq.c
  CC [M]  drivers/gpu/drm/i915/i915_irq.o
  CHECK   drivers/gpu/drm/i915/i915_debugfs.c
drivers/gpu/drm/i915/i915_debugfs.c:558:31: warning: dereference of noderef expression
drivers/gpu/drm/i915/i915_debugfs.c:558:39: warning: dereference of noderef expression
drivers/gpu/drm/i915/i915_debugfs.c:558:51: warning: dereference of noderef expression
drivers/gpu/drm/i915/i915_debugfs.c:558:63: warning: dereference of noderef expression
  CC [M]  drivers/gpu/drm/i915/i915_debugfs.o
  CHECK   drivers/gpu/drm/i915/i915_suspend.c
  CC [M]  drivers/gpu/drm/i915/i915_suspend.o
  CHECK   drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/i915_gem.c:3703:14: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/i915/i915_gem.c:3703:14:    expected unsigned int [unsigned] [usertype] mask
drivers/gpu/drm/i915/i915_gem.c:3703:14:    got restricted gfp_t
drivers/gpu/drm/i915/i915_gem.c:3706:22: warning: invalid assignment: &=
drivers/gpu/drm/i915/i915_gem.c:3706:22:    left side has type unsigned int
drivers/gpu/drm/i915/i915_gem.c:3706:22:    right side has type restricted gfp_t
drivers/gpu/drm/i915/i915_gem.c:3707:22: warning: invalid assignment: |=
drivers/gpu/drm/i915/i915_gem.c:3707:22:    left side has type unsigned int
drivers/gpu/drm/i915/i915_gem.c:3707:22:    right side has type restricted gfp_t
drivers/gpu/drm/i915/i915_gem.c:3711:39: warning: incorrect type in argument 2 (different base types)
drivers/gpu/drm/i915/i915_gem.c:3711:39:    expected restricted gfp_t [usertype] mask
drivers/gpu/drm/i915/i915_gem.c:3711:39:    got unsigned int [unsigned] [usertype] mask
  CC [M]  drivers/gpu/drm/i915/i915_gem.o
  CHECK   drivers/gpu/drm/i915/i915_gem_context.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_context.o
  CHECK   drivers/gpu/drm/i915/i915_gem_debug.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_debug.o
  CHECK   drivers/gpu/drm/i915/i915_gem_evict.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_evict.o
  CHECK   drivers/gpu/drm/i915/i915_gem_execbuffer.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_execbuffer.o
  CHECK   drivers/gpu/drm/i915/i915_gem_gtt.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_gtt.o
  CHECK   drivers/gpu/drm/i915/i915_gem_stolen.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_stolen.o
  CHECK   drivers/gpu/drm/i915/i915_gem_tiling.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_tiling.o
  CHECK   drivers/gpu/drm/i915/i915_sysfs.c
  CC [M]  drivers/gpu/drm/i915/i915_sysfs.o
  CHECK   drivers/gpu/drm/i915/i915_trace_points.c
  CC [M]  drivers/gpu/drm/i915/i915_trace_points.o
  CHECK   drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_display.c:1736:9: warning: mixing different enum types
drivers/gpu/drm/i915/intel_display.c:1736:9:     int enum transcoder  versus
drivers/gpu/drm/i915/intel_display.c:1736:9:     int enum pipe
drivers/gpu/drm/i915/intel_display.c:3659:48: warning: mixing different enum types
drivers/gpu/drm/i915/intel_display.c:3659:48:     int enum pipe  versus
drivers/gpu/drm/i915/intel_display.c:3659:48:     int enum transcoder
  CC [M]  drivers/gpu/drm/i915/intel_display.o
  CHECK   drivers/gpu/drm/i915/intel_crt.c
  CC [M]  drivers/gpu/drm/i915/intel_crt.o
  CHECK   drivers/gpu/drm/i915/intel_lvds.c
  CC [M]  drivers/gpu/drm/i915/intel_lvds.o
  CHECK   drivers/gpu/drm/i915/intel_bios.c
drivers/gpu/drm/i915/intel_bios.c:706:60: warning: incorrect type in initializer (different address spaces)
drivers/gpu/drm/i915/intel_bios.c:706:60:    expected struct vbt_header *vbt
drivers/gpu/drm/i915/intel_bios.c:706:60:    got void [noderef] <asn:2>*vbt
drivers/gpu/drm/i915/intel_bios.c:726:42: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915/intel_bios.c:726:42:    expected void const *<noident>
drivers/gpu/drm/i915/intel_bios.c:726:42:    got unsigned char [noderef] [usertype] <asn:2>*
drivers/gpu/drm/i915/intel_bios.c:727:40: warning: cast removes address space of expression
drivers/gpu/drm/i915/intel_bios.c:738:24: warning: cast removes address space of expression
  CC [M]  drivers/gpu/drm/i915/intel_bios.o
  CHECK   drivers/gpu/drm/i915/intel_ddi.c
drivers/gpu/drm/i915/intel_ddi.c:87:6: warning: symbol 'intel_prepare_ddi_buffers' was not declared. Should it be static?
drivers/gpu/drm/i915/intel_ddi.c:1036:34: warning: mixing different enum types
drivers/gpu/drm/i915/intel_ddi.c:1036:34:     int enum pipe  versus
drivers/gpu/drm/i915/intel_ddi.c:1036:34:     int enum transcoder
  CC [M]  drivers/gpu/drm/i915/intel_ddi.o
drivers/gpu/drm/i915/intel_ddi.c: In function ‘intel_ddi_setup_hw_pll_state’:
drivers/gpu/drm/i915/intel_ddi.c:1129:2: warning: ‘port’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gpu/drm/i915/intel_ddi.c:1111:12: note: ‘port’ was declared here
  CHECK   drivers/gpu/drm/i915/intel_dp.c
  CC [M]  drivers/gpu/drm/i915/intel_dp.o
  CHECK   drivers/gpu/drm/i915/intel_hdmi.c
  CC [M]  drivers/gpu/drm/i915/intel_hdmi.o
  CHECK   drivers/gpu/drm/i915/intel_sdvo.c
  CC [M]  drivers/gpu/drm/i915/intel_sdvo.o
  CHECK   drivers/gpu/drm/i915/intel_modes.c
  CC [M]  drivers/gpu/drm/i915/intel_modes.o
  CHECK   drivers/gpu/drm/i915/intel_panel.c
  CC [M]  drivers/gpu/drm/i915/intel_panel.o
  CHECK   drivers/gpu/drm/i915/intel_pm.c
drivers/gpu/drm/i915/intel_pm.c:2173:1: warning: symbol 'mchdev_lock' was not declared. Should it be static?
  CC [M]  drivers/gpu/drm/i915/intel_pm.o
  CHECK   drivers/gpu/drm/i915/intel_i2c.c
  CC [M]  drivers/gpu/drm/i915/intel_i2c.o
  CHECK   drivers/gpu/drm/i915/intel_fb.c
  CC [M]  drivers/gpu/drm/i915/intel_fb.o
  CHECK   drivers/gpu/drm/i915/intel_tv.c
  CC [M]  drivers/gpu/drm/i915/intel_tv.o
  CHECK   drivers/gpu/drm/i915/intel_dvo.c
  CC [M]  drivers/gpu/drm/i915/intel_dvo.o
  CHECK   drivers/gpu/drm/i915/intel_ringbuffer.c
  CC [M]  drivers/gpu/drm/i915/intel_ringbuffer.o
  CHECK   drivers/gpu/drm/i915/intel_overlay.c
  CC [M]  drivers/gpu/drm/i915/intel_overlay.o
  CHECK   drivers/gpu/drm/i915/intel_sprite.c
  CC [M]  drivers/gpu/drm/i915/intel_sprite.o
  CHECK   drivers/gpu/drm/i915/intel_opregion.c
  CC [M]  drivers/gpu/drm/i915/intel_opregion.o
  CHECK   drivers/gpu/drm/i915/dvo_ch7xxx.c
  CC [M]  drivers/gpu/drm/i915/dvo_ch7xxx.o
  CHECK   drivers/gpu/drm/i915/dvo_ch7017.c
  CC [M]  drivers/gpu/drm/i915/dvo_ch7017.o
  CHECK   drivers/gpu/drm/i915/dvo_ivch.c
  CC [M]  drivers/gpu/drm/i915/dvo_ivch.o
  CHECK   drivers/gpu/drm/i915/dvo_tfp410.c
  CC [M]  drivers/gpu/drm/i915/dvo_tfp410.o
  CHECK   drivers/gpu/drm/i915/dvo_sil164.c
  CC [M]  drivers/gpu/drm/i915/dvo_sil164.o
  CHECK   drivers/gpu/drm/i915/dvo_ns2501.c
  CC [M]  drivers/gpu/drm/i915/dvo_ns2501.o
  CHECK   drivers/gpu/drm/i915/i915_gem_dmabuf.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_dmabuf.o
  CHECK   drivers/gpu/drm/i915/i915_ioc32.c
  CC [M]  drivers/gpu/drm/i915/i915_ioc32.o
  CHECK   drivers/gpu/drm/i915/intel_acpi.c
  CC [M]  drivers/gpu/drm/i915/intel_acpi.o
  LD [M]  drivers/gpu/drm/i915/i915.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      drivers/gpu/drm/i915/i915.mod.o
  LD [M]  drivers/gpu/drm/i915/i915.ko

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e908c498ed87..31ab43b79736 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -628,7 +628,7 @@ typedef struct drm_i915_private {
 	/** forcewake_count is protected by gt_lock */
 	unsigned forcewake_count;
 	/** gt_lock is also taken in irq contexts. */
-	struct spinlock gt_lock;
+	spinlock_t gt_lock;
 
 	struct intel_gmbus gmbus[GMBUS_NUM_PORTS];
 
@@ -1128,7 +1128,7 @@ struct drm_i915_gem_request {
 
 struct drm_i915_file_private {
 	struct {
-		struct spinlock lock;
+		spinlock_t lock;
 		struct list_head request_list;
 	} mm;
 	struct idr context_idr;
-- 
cgit v1.2.3


From acd15b6cc20f85bcef9e08b6ed4f142c34791c32 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Fri, 30 Nov 2012 11:24:50 +0100
Subject: drm/i915: optimize ilk/snb irq handler

We only need to read/write the south interrupt register if the
corresponding bit is set in the north master interrupt register.
Noticed while reading our interrupt handling code.

Same optimization has already been applied on ivb in

commit 0e43406bcc1868a316eea6012a0a09d992c53521
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed May 9 21:45:44 2012 +0100

    drm/i915: Simplify interrupt processing for IvyBridge

    We can take advantage that the PCH_IIR is a subordinate register to
    reduce one of the required IIR reads, and that we only need to clear
    interrupts handled to reduce the writes. And by simply tidying the code
    we can reduce the line count and hopefully make it more readable.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_irq.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 6cd3dc94b472..26753ee6571d 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -758,7 +758,7 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg)
 	struct drm_device *dev = (struct drm_device *) arg;
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	int ret = IRQ_NONE;
-	u32 de_iir, gt_iir, de_ier, pch_iir, pm_iir;
+	u32 de_iir, gt_iir, de_ier, pm_iir;
 
 	atomic_inc(&dev_priv->irq_received);
 
@@ -769,11 +769,9 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg)
 
 	de_iir = I915_READ(DEIIR);
 	gt_iir = I915_READ(GTIIR);
-	pch_iir = I915_READ(SDEIIR);
 	pm_iir = I915_READ(GEN6_PMIIR);
 
-	if (de_iir == 0 && gt_iir == 0 && pch_iir == 0 &&
-	    (!IS_GEN6(dev) || pm_iir == 0))
+	if (de_iir == 0 && gt_iir == 0 && (!IS_GEN6(dev) || pm_iir == 0))
 		goto done;
 
 	ret = IRQ_HANDLED;
@@ -804,10 +802,15 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg)
 
 	/* check event from PCH */
 	if (de_iir & DE_PCH_EVENT) {
+		u32 pch_iir = I915_READ(SDEIIR);
+
 		if (HAS_PCH_CPT(dev))
 			cpt_irq_handler(dev, pch_iir);
 		else
 			ibx_irq_handler(dev, pch_iir);
+
+		/* should clear PCH hotplug event before clear CPU irq */
+		I915_WRITE(SDEIIR, pch_iir);
 	}
 
 	if (IS_GEN5(dev) &&  de_iir & DE_PCU_EVENT)
@@ -816,8 +819,6 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg)
 	if (IS_GEN6(dev) && pm_iir & GEN6_PM_DEFERRED_EVENTS)
 		gen6_queue_rps_work(dev_priv, pm_iir);
 
-	/* should clear PCH hotplug event before clear CPU irq */
-	I915_WRITE(SDEIIR, pch_iir);
 	I915_WRITE(GTIIR, gt_iir);
 	I915_WRITE(DEIIR, de_iir);
 	I915_WRITE(GEN6_PMIIR, pm_iir);
-- 
cgit v1.2.3


From 5973c7ee519e2a240c68b290a1836bdb25ed3701 Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Thu, 15 Nov 2012 11:32:16 +0000
Subject: drm: Introduce drm_mm_create_block()

To be used later by i915 to preallocate exact blocks of space from the
range manager.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/drm_mm.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_mm.h     |  4 ++++
 2 files changed, 54 insertions(+)

diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 0761a03cdbb2..bd203b61a72b 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -161,6 +161,56 @@ static void drm_mm_insert_helper(struct drm_mm_node *hole_node,
 	}
 }
 
+struct drm_mm_node *drm_mm_create_block(struct drm_mm *mm,
+					unsigned long start,
+					unsigned long size,
+					bool atomic)
+{
+	struct drm_mm_node *hole, *node;
+	unsigned long end = start + size;
+
+	list_for_each_entry(hole, &mm->hole_stack, hole_stack) {
+		unsigned long hole_start;
+		unsigned long hole_end;
+
+		BUG_ON(!hole->hole_follows);
+		hole_start = drm_mm_hole_node_start(hole);
+		hole_end = drm_mm_hole_node_end(hole);
+
+		if (hole_start > start || hole_end < end)
+			continue;
+
+		node = drm_mm_kmalloc(mm, atomic);
+		if (unlikely(node == NULL))
+			return NULL;
+
+		node->start = start;
+		node->size = size;
+		node->mm = mm;
+		node->allocated = 1;
+
+		INIT_LIST_HEAD(&node->hole_stack);
+		list_add(&node->node_list, &hole->node_list);
+
+		if (start == hole_start) {
+			hole->hole_follows = 0;
+			list_del_init(&hole->hole_stack);
+		}
+
+		node->hole_follows = 0;
+		if (end != hole_end) {
+			list_add(&node->hole_stack, &mm->hole_stack);
+			node->hole_follows = 1;
+		}
+
+		return node;
+	}
+
+	WARN(1, "no hole found for block 0x%lx + 0x%lx\n", start, size);
+	return NULL;
+}
+EXPORT_SYMBOL(drm_mm_create_block);
+
 struct drm_mm_node *drm_mm_get_block_generic(struct drm_mm_node *hole_node,
 					     unsigned long size,
 					     unsigned alignment,
diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
index 06d7f798a08c..4020f9661c3c 100644
--- a/include/drm/drm_mm.h
+++ b/include/drm/drm_mm.h
@@ -102,6 +102,10 @@ static inline bool drm_mm_initialized(struct drm_mm *mm)
 /*
  * Basic range manager support (drm_mm.c)
  */
+extern struct drm_mm_node *drm_mm_create_block(struct drm_mm *mm,
+					       unsigned long start,
+					       unsigned long size,
+					       bool atomic);
 extern struct drm_mm_node *drm_mm_get_block_generic(struct drm_mm_node *node,
 						    unsigned long size,
 						    unsigned alignment,
-- 
cgit v1.2.3


From 9e8944ab564f2e3dde90a518cd32048c58918608 Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Thu, 15 Nov 2012 11:32:17 +0000
Subject: drm: Introduce an iterator over holes in the drm_mm range manager

This will be used i915 in forthcoming patches in order to measure the
largest contiguous chunk of memory available for enabling chipset
features.

v2: Try to make the macro marginally safer and more readable by not
depending upon the drm_mm_hole_node_end() being non-zero. Note that we
need to open code list_for_each() in order to update the hole_start,
hole_end variable on each iteration and keep the macro sane.

v3: Tidy up few BUG_ONs that fell foul of adding additional tests to
drm_mm_hole_node_start().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/drm_mm.c | 62 ++++++++++++++++--------------------------------
 include/drm/drm_mm.h     | 36 ++++++++++++++++++++++++++++
 2 files changed, 57 insertions(+), 41 deletions(-)

diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index bd203b61a72b..b751b8e1e205 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -102,20 +102,6 @@ int drm_mm_pre_get(struct drm_mm *mm)
 }
 EXPORT_SYMBOL(drm_mm_pre_get);
 
-static inline unsigned long drm_mm_hole_node_start(struct drm_mm_node *hole_node)
-{
-	return hole_node->start + hole_node->size;
-}
-
-static inline unsigned long drm_mm_hole_node_end(struct drm_mm_node *hole_node)
-{
-	struct drm_mm_node *next_node =
-		list_entry(hole_node->node_list.next, struct drm_mm_node,
-			   node_list);
-
-	return next_node->start;
-}
-
 static void drm_mm_insert_helper(struct drm_mm_node *hole_node,
 				 struct drm_mm_node *node,
 				 unsigned long size, unsigned alignment,
@@ -127,7 +113,7 @@ static void drm_mm_insert_helper(struct drm_mm_node *hole_node,
 	unsigned long adj_start = hole_start;
 	unsigned long adj_end = hole_end;
 
-	BUG_ON(!hole_node->hole_follows || node->allocated);
+	BUG_ON(node->allocated);
 
 	if (mm->color_adjust)
 		mm->color_adjust(hole_node, color, &adj_start, &adj_end);
@@ -155,7 +141,7 @@ static void drm_mm_insert_helper(struct drm_mm_node *hole_node,
 	BUG_ON(node->start + node->size > adj_end);
 
 	node->hole_follows = 0;
-	if (node->start + node->size < hole_end) {
+	if (__drm_mm_hole_node_start(node) < hole_end) {
 		list_add(&node->hole_stack, &mm->hole_stack);
 		node->hole_follows = 1;
 	}
@@ -168,15 +154,10 @@ struct drm_mm_node *drm_mm_create_block(struct drm_mm *mm,
 {
 	struct drm_mm_node *hole, *node;
 	unsigned long end = start + size;
+	unsigned long hole_start;
+	unsigned long hole_end;
 
-	list_for_each_entry(hole, &mm->hole_stack, hole_stack) {
-		unsigned long hole_start;
-		unsigned long hole_end;
-
-		BUG_ON(!hole->hole_follows);
-		hole_start = drm_mm_hole_node_start(hole);
-		hole_end = drm_mm_hole_node_end(hole);
-
+	drm_mm_for_each_hole(hole, mm, hole_start, hole_end) {
 		if (hole_start > start || hole_end < end)
 			continue;
 
@@ -293,7 +274,7 @@ static void drm_mm_insert_helper_range(struct drm_mm_node *hole_node,
 	BUG_ON(node->start + node->size > end);
 
 	node->hole_follows = 0;
-	if (node->start + node->size < hole_end) {
+	if (__drm_mm_hole_node_start(node) < hole_end) {
 		list_add(&node->hole_stack, &mm->hole_stack);
 		node->hole_follows = 1;
 	}
@@ -358,12 +339,13 @@ void drm_mm_remove_node(struct drm_mm_node *node)
 	    list_entry(node->node_list.prev, struct drm_mm_node, node_list);
 
 	if (node->hole_follows) {
-		BUG_ON(drm_mm_hole_node_start(node)
-				== drm_mm_hole_node_end(node));
+		BUG_ON(__drm_mm_hole_node_start(node) ==
+		       __drm_mm_hole_node_end(node));
 		list_del(&node->hole_stack);
 	} else
-		BUG_ON(drm_mm_hole_node_start(node)
-				!= drm_mm_hole_node_end(node));
+		BUG_ON(__drm_mm_hole_node_start(node) !=
+		       __drm_mm_hole_node_end(node));
+
 
 	if (!prev_node->hole_follows) {
 		prev_node->hole_follows = 1;
@@ -421,6 +403,8 @@ struct drm_mm_node *drm_mm_search_free_generic(const struct drm_mm *mm,
 {
 	struct drm_mm_node *entry;
 	struct drm_mm_node *best;
+	unsigned long adj_start;
+	unsigned long adj_end;
 	unsigned long best_size;
 
 	BUG_ON(mm->scanned_blocks);
@@ -428,17 +412,13 @@ struct drm_mm_node *drm_mm_search_free_generic(const struct drm_mm *mm,
 	best = NULL;
 	best_size = ~0UL;
 
-	list_for_each_entry(entry, &mm->hole_stack, hole_stack) {
-		unsigned long adj_start = drm_mm_hole_node_start(entry);
-		unsigned long adj_end = drm_mm_hole_node_end(entry);
-
+	drm_mm_for_each_hole(entry, mm, adj_start, adj_end) {
 		if (mm->color_adjust) {
 			mm->color_adjust(entry, color, &adj_start, &adj_end);
 			if (adj_end <= adj_start)
 				continue;
 		}
 
-		BUG_ON(!entry->hole_follows);
 		if (!check_free_hole(adj_start, adj_end, size, alignment))
 			continue;
 
@@ -465,6 +445,8 @@ struct drm_mm_node *drm_mm_search_free_in_range_generic(const struct drm_mm *mm,
 {
 	struct drm_mm_node *entry;
 	struct drm_mm_node *best;
+	unsigned long adj_start;
+	unsigned long adj_end;
 	unsigned long best_size;
 
 	BUG_ON(mm->scanned_blocks);
@@ -472,13 +454,11 @@ struct drm_mm_node *drm_mm_search_free_in_range_generic(const struct drm_mm *mm,
 	best = NULL;
 	best_size = ~0UL;
 
-	list_for_each_entry(entry, &mm->hole_stack, hole_stack) {
-		unsigned long adj_start = drm_mm_hole_node_start(entry) < start ?
-			start : drm_mm_hole_node_start(entry);
-		unsigned long adj_end = drm_mm_hole_node_end(entry) > end ?
-			end : drm_mm_hole_node_end(entry);
-
-		BUG_ON(!entry->hole_follows);
+	drm_mm_for_each_hole(entry, mm, adj_start, adj_end) {
+		if (adj_start < start)
+			adj_start = start;
+		if (adj_end > end)
+			adj_end = end;
 
 		if (mm->color_adjust) {
 			mm->color_adjust(entry, color, &adj_start, &adj_end);
diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
index 4020f9661c3c..cd453653f634 100644
--- a/include/drm/drm_mm.h
+++ b/include/drm/drm_mm.h
@@ -89,6 +89,29 @@ static inline bool drm_mm_initialized(struct drm_mm *mm)
 {
 	return mm->hole_stack.next;
 }
+
+static inline unsigned long __drm_mm_hole_node_start(struct drm_mm_node *hole_node)
+{
+	return hole_node->start + hole_node->size;
+}
+
+static inline unsigned long drm_mm_hole_node_start(struct drm_mm_node *hole_node)
+{
+	BUG_ON(!hole_node->hole_follows);
+	return __drm_mm_hole_node_start(hole_node);
+}
+
+static inline unsigned long __drm_mm_hole_node_end(struct drm_mm_node *hole_node)
+{
+	return list_entry(hole_node->node_list.next,
+			  struct drm_mm_node, node_list)->start;
+}
+
+static inline unsigned long drm_mm_hole_node_end(struct drm_mm_node *hole_node)
+{
+	return __drm_mm_hole_node_end(hole_node);
+}
+
 #define drm_mm_for_each_node(entry, mm) list_for_each_entry(entry, \
 						&(mm)->head_node.node_list, \
 						node_list)
@@ -99,6 +122,19 @@ static inline bool drm_mm_initialized(struct drm_mm *mm)
 	     entry != NULL; entry = next, \
 		next = entry ? list_entry(entry->node_list.next, \
 			struct drm_mm_node, node_list) : NULL) \
+
+/* Note that we need to unroll list_for_each_entry in order to inline
+ * setting hole_start and hole_end on each iteration and keep the
+ * macro sane.
+ */
+#define drm_mm_for_each_hole(entry, mm, hole_start, hole_end) \
+	for (entry = list_entry((mm)->hole_stack.next, struct drm_mm_node, hole_stack); \
+	     &entry->hole_stack != &(mm)->hole_stack ? \
+	     hole_start = drm_mm_hole_node_start(entry), \
+	     hole_end = drm_mm_hole_node_end(entry), \
+	     1 : 0; \
+	     entry = list_entry(entry->hole_stack.next, struct drm_mm_node, hole_stack))
+
 /*
  * Basic range manager support (drm_mm.c)
  */
-- 
cgit v1.2.3


From e12a2d53ae45a69aea499b64f75e7222cca0f12f Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Thu, 15 Nov 2012 11:32:18 +0000
Subject: drm/i915: Fix detection of base of stolen memory

The routine to query the base of stolen memory was using the wrong
registers and the wrong encodings on virtually every platform.

It was not until the G33 refresh, that a PCI config register was
introduced that explicitly said where the stolen memory was. Prior to
865G there was not even a register that said where the end of usable
low memory was and where the stolen memory began (or ended depending
upon chipset). Before then, one has to look at the BIOS memory maps to
find the Top of Memory. Alas that is not exported by arch/x86 and so we
have to resort to disabling stolen memory on gen2 for the time being.

Then SandyBridge enlarged the PCI register to a full 32-bits and change
the encoding of the address, so even though we happened to be querying
the right register, we read the wrong bits and ended up using address 0
for our stolen data, i.e. notably FBC.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h        |  1 +
 drivers/gpu/drm/i915/i915_gem_stolen.c | 81 +++++++++++++++++-----------------
 2 files changed, 42 insertions(+), 40 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 31ab43b79736..21360a7e2c8f 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -765,6 +765,7 @@ typedef struct drm_i915_private {
 		unsigned long gtt_start;
 		unsigned long gtt_mappable_end;
 		unsigned long gtt_end;
+		unsigned long stolen_base; /* limited to low memory (32-bit) */
 
 		struct io_mapping *gtt_mapping;
 		phys_addr_t gtt_base_addr;
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index 8e91083b126f..be24312cd32f 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -42,56 +42,50 @@
  * for is a boon.
  */
 
-#define PTE_ADDRESS_MASK		0xfffff000
-#define PTE_ADDRESS_MASK_HIGH		0x000000f0 /* i915+ */
-#define PTE_MAPPING_TYPE_UNCACHED	(0 << 1)
-#define PTE_MAPPING_TYPE_DCACHE		(1 << 1) /* i830 only */
-#define PTE_MAPPING_TYPE_CACHED		(3 << 1)
-#define PTE_MAPPING_TYPE_MASK		(3 << 1)
-#define PTE_VALID			(1 << 0)
-
-/**
- * i915_stolen_to_phys - take an offset into stolen memory and turn it into
- *                       a physical one
- * @dev: drm device
- * @offset: address to translate
- *
- * Some chip functions require allocations from stolen space and need the
- * physical address of the memory in question.
- */
-static unsigned long i915_stolen_to_phys(struct drm_device *dev, u32 offset)
+static unsigned long i915_stolen_to_physical(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct pci_dev *pdev = dev_priv->bridge_dev;
 	u32 base;
 
-#if 0
 	/* On the machines I have tested the Graphics Base of Stolen Memory
-	 * is unreliable, so compute the base by subtracting the stolen memory
-	 * from the Top of Low Usable DRAM which is where the BIOS places
-	 * the graphics stolen memory.
+	 * is unreliable, so on those compute the base by subtracting the
+	 * stolen memory from the Top of Low Usable DRAM which is where the
+	 * BIOS places the graphics stolen memory.
+	 *
+	 * On gen2, the layout is slightly different with the Graphics Segment
+	 * immediately following Top of Memory (or Top of Usable DRAM). Note
+	 * it appears that TOUD is only reported by 865g, so we just use the
+	 * top of memory as determined by the e820 probe.
+	 *
+	 * XXX gen2 requires an unavailable symbol and 945gm fails with
+	 * its value of TOLUD.
 	 */
-	if (INTEL_INFO(dev)->gen > 3 || IS_G33(dev)) {
-		/* top 32bits are reserved = 0 */
+	base = 0;
+	if (INTEL_INFO(dev)->gen >= 6) {
+		/* Read Base Data of Stolen Memory Register (BDSM) directly.
+		 * Note that there is also a MCHBAR miror at 0x1080c0 or
+		 * we could use device 2:0x5c instead.
+		*/
+		pci_read_config_dword(pdev, 0xB0, &base);
+		base &= ~4095; /* lower bits used for locking register */
+	} else if (INTEL_INFO(dev)->gen > 3 || IS_G33(dev)) {
+		/* Read Graphics Base of Stolen Memory directly */
 		pci_read_config_dword(pdev, 0xA4, &base);
-	} else {
-		/* XXX presume 8xx is the same as i915 */
-		pci_bus_read_config_dword(pdev->bus, 2, 0x5C, &base);
-	}
-#else
-	if (INTEL_INFO(dev)->gen > 3 || IS_G33(dev)) {
-		u16 val;
-		pci_read_config_word(pdev, 0xb0, &val);
-		base = val >> 4 << 20;
-	} else {
+#if 0
+	} else if (IS_GEN3(dev)) {
 		u8 val;
+		/* Stolen is immediately below Top of Low Usable DRAM */
 		pci_read_config_byte(pdev, 0x9c, &val);
 		base = val >> 3 << 27;
-	}
-	base -= dev_priv->mm.gtt->stolen_size;
+		base -= dev_priv->mm.gtt->stolen_size;
+	} else {
+		/* Stolen is immediately above Top of Memory */
+		base = max_low_pfn_mapped << PAGE_SHIFT;
 #endif
+	}
 
-	return base + offset;
+	return base;
 }
 
 static void i915_warn_stolen(struct drm_device *dev)
@@ -116,7 +110,7 @@ static void i915_setup_compression(struct drm_device *dev, int size)
 	if (!compressed_fb)
 		goto err;
 
-	cfb_base = i915_stolen_to_phys(dev, compressed_fb->start);
+	cfb_base = dev_priv->mm.stolen_base + compressed_fb->start;
 	if (!cfb_base)
 		goto err_fb;
 
@@ -129,7 +123,7 @@ static void i915_setup_compression(struct drm_device *dev, int size)
 		if (!compressed_llb)
 			goto err_fb;
 
-		ll_base = i915_stolen_to_phys(dev, compressed_llb->start);
+		ll_base = dev_priv->mm.stolen_base + compressed_llb->start;
 		if (!ll_base)
 			goto err_llb;
 	}
@@ -148,7 +142,7 @@ static void i915_setup_compression(struct drm_device *dev, int size)
 	}
 
 	DRM_DEBUG_KMS("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n",
-		      cfb_base, ll_base, size >> 20);
+		      (long)cfb_base, (long)ll_base, size >> 20);
 	return;
 
 err_llb:
@@ -180,6 +174,13 @@ int i915_gem_init_stolen(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned long prealloc_size = dev_priv->mm.gtt->stolen_size;
 
+	dev_priv->mm.stolen_base = i915_stolen_to_physical(dev);
+	if (dev_priv->mm.stolen_base == 0)
+		return 0;
+
+	DRM_DEBUG_KMS("found %d bytes of stolen memory at %08lx\n",
+		      dev_priv->mm.gtt->stolen_size, dev_priv->mm.stolen_base);
+
 	/* Basic memrange allocator for stolen space */
 	drm_mm_init(&dev_priv->mm.stolen, 0, prealloc_size);
 
-- 
cgit v1.2.3


From ed2f3452677e46a4270c25c1b7fa3e060fdd501e Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Thu, 15 Nov 2012 11:32:19 +0000
Subject: drm/i915: Avoid clearing preallocated regions from the GTT

As yet we do not do any preallocation (chicken-and-egg problem), but we
may like to preserve anything already allocated by the BIOS or grub and
reuse for own purposes after initialising the driver.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h     |  2 ++
 drivers/gpu/drm/i915/i915_gem_gtt.c | 32 +++++++++++++++++++++++++++++---
 2 files changed, 31 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 21360a7e2c8f..f16101fa8b4a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -935,6 +935,8 @@ enum i915_cache_level {
 	I915_CACHE_LLC_MLC, /* gen6+, in docs at least! */
 };
 
+#define I915_GTT_RESERVED ((struct drm_mm_node *)0x1)
+
 struct drm_i915_gem_object_ops {
 	/* Interface between the GEM object and its backing storage.
 	 * get_pages() is called once prior to the use of the associated set
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index f7ac61ee1504..cc1be53a65f9 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -531,20 +531,46 @@ void i915_gem_init_global_gtt(struct drm_device *dev,
 			      unsigned long end)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_mm_node *entry;
+	struct drm_i915_gem_object *obj;
+	unsigned long hole_start, hole_end;
 
-	/* Substract the guard page ... */
+	/* Subtract the guard page ... */
 	drm_mm_init(&dev_priv->mm.gtt_space, start, end - start - PAGE_SIZE);
 	if (!HAS_LLC(dev))
 		dev_priv->mm.gtt_space.color_adjust = i915_gtt_color_adjust;
 
+	/* Mark any preallocated objects as occupied */
+	list_for_each_entry(obj, &dev_priv->mm.bound_list, gtt_list) {
+		DRM_DEBUG_KMS("reserving preallocated space: %x + %zx\n",
+			      obj->gtt_offset, obj->base.size);
+
+		BUG_ON(obj->gtt_space != I915_GTT_RESERVED);
+		obj->gtt_space = drm_mm_create_block(&dev_priv->mm.gtt_space,
+						     obj->gtt_offset,
+						     obj->base.size,
+						     false);
+		obj->has_global_gtt_mapping = 1;
+	}
+
 	dev_priv->mm.gtt_start = start;
 	dev_priv->mm.gtt_mappable_end = mappable_end;
 	dev_priv->mm.gtt_end = end;
 	dev_priv->mm.gtt_total = end - start;
 	dev_priv->mm.mappable_gtt_total = min(end, mappable_end) - start;
 
-	/* ... but ensure that we clear the entire range. */
-	i915_ggtt_clear_range(dev, start / PAGE_SIZE, (end-start) / PAGE_SIZE);
+	/* Clear any non-preallocated blocks */
+	drm_mm_for_each_hole(entry, &dev_priv->mm.gtt_space,
+			     hole_start, hole_end) {
+		DRM_DEBUG_KMS("clearing unused GTT space: [%lx, %lx]\n",
+			      hole_start, hole_end);
+		i915_ggtt_clear_range(dev,
+				      hole_start / PAGE_SIZE,
+				      (hole_end-hole_start) / PAGE_SIZE);
+	}
+
+	/* And finally clear the reserved guard page */
+	i915_ggtt_clear_range(dev, end / PAGE_SIZE - 1, 1);
 }
 
 static int setup_scratch_page(struct drm_device *dev)
-- 
cgit v1.2.3


From 11be49eb4db24c5e971edef160afb87788cc270c Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Thu, 15 Nov 2012 11:32:20 +0000
Subject: drm/i915: Delay allocation of stolen space for FBC

As FBC is commonly disabled due to limitations of the chipset upon
output configurations, on many systems FBC is never enabled. For those
systems, it is advantageous to make use of the stolen memory for other
objects and so we defer allocation of the FBC chunk until we actually
require it. This increases the likelihood of that allocation failing,
but that in turns means that we are already taking advantage of the
stolen memory!

As well as delaying the allocation from driver initialisation until the
first use of FBC, we also return the stolen block after we finish using
it - allowing greater flexibility in our usage of stolen space. A side
effect of this is that we can then attempt to allocate only the required
amount of space (with a little slack to reduce reallocation rate and
avoid fragmentation).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h        |   2 +
 drivers/gpu/drm/i915/i915_gem_stolen.c | 108 +++++++++++++++------------------
 drivers/gpu/drm/i915/intel_display.c   |   3 +
 drivers/gpu/drm/i915/intel_pm.c        |  15 +++--
 4 files changed, 64 insertions(+), 64 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index f16101fa8b4a..6969c722edf6 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1571,6 +1571,8 @@ int i915_gem_evict_everything(struct drm_device *dev);
 
 /* i915_gem_stolen.c */
 int i915_gem_init_stolen(struct drm_device *dev);
+int i915_gem_stolen_setup_compression(struct drm_device *dev, int size);
+void i915_gem_stolen_cleanup_compression(struct drm_device *dev);
 void i915_gem_cleanup_stolen(struct drm_device *dev);
 
 /* i915_gem_tiling.c */
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index be24312cd32f..10ca473d85f2 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -88,33 +88,27 @@ static unsigned long i915_stolen_to_physical(struct drm_device *dev)
 	return base;
 }
 
-static void i915_warn_stolen(struct drm_device *dev)
-{
-	DRM_INFO("not enough stolen space for compressed buffer, disabling\n");
-	DRM_INFO("hint: you may be able to increase stolen memory size in the BIOS to avoid this\n");
-}
-
-static void i915_setup_compression(struct drm_device *dev, int size)
+static int i915_setup_compression(struct drm_device *dev, int size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_mm_node *compressed_fb, *uninitialized_var(compressed_llb);
-	unsigned long cfb_base;
-	unsigned long ll_base = 0;
 
-	/* Just in case the BIOS is doing something questionable. */
-	intel_disable_fbc(dev);
-
-	compressed_fb = drm_mm_search_free(&dev_priv->mm.stolen, size, 4096, 0);
+	/* Try to over-allocate to reduce reallocations and fragmentation */
+	compressed_fb = drm_mm_search_free(&dev_priv->mm.stolen,
+					   size <<= 1, 4096, 0);
+	if (!compressed_fb)
+		compressed_fb = drm_mm_search_free(&dev_priv->mm.stolen,
+						   size >>= 1, 4096, 0);
 	if (compressed_fb)
 		compressed_fb = drm_mm_get_block(compressed_fb, size, 4096);
 	if (!compressed_fb)
 		goto err;
 
-	cfb_base = dev_priv->mm.stolen_base + compressed_fb->start;
-	if (!cfb_base)
-		goto err_fb;
-
-	if (!(IS_GM45(dev) || HAS_PCH_SPLIT(dev))) {
+	if (HAS_PCH_SPLIT(dev))
+		I915_WRITE(ILK_DPFC_CB_BASE, compressed_fb->start);
+	else if (IS_GM45(dev)) {
+		I915_WRITE(DPFC_CB_BASE, compressed_fb->start);
+	} else {
 		compressed_llb = drm_mm_search_free(&dev_priv->mm.stolen,
 						    4096, 4096, 0);
 		if (compressed_llb)
@@ -123,56 +117,68 @@ static void i915_setup_compression(struct drm_device *dev, int size)
 		if (!compressed_llb)
 			goto err_fb;
 
-		ll_base = dev_priv->mm.stolen_base + compressed_llb->start;
-		if (!ll_base)
-			goto err_llb;
+		dev_priv->compressed_llb = compressed_llb;
+
+		I915_WRITE(FBC_CFB_BASE,
+			   dev_priv->mm.stolen_base + compressed_fb->start);
+		I915_WRITE(FBC_LL_BASE,
+			   dev_priv->mm.stolen_base + compressed_llb->start);
 	}
 
+	dev_priv->compressed_fb = compressed_fb;
 	dev_priv->cfb_size = size;
 
-	dev_priv->compressed_fb = compressed_fb;
-	if (HAS_PCH_SPLIT(dev))
-		I915_WRITE(ILK_DPFC_CB_BASE, compressed_fb->start);
-	else if (IS_GM45(dev)) {
-		I915_WRITE(DPFC_CB_BASE, compressed_fb->start);
-	} else {
-		I915_WRITE(FBC_CFB_BASE, cfb_base);
-		I915_WRITE(FBC_LL_BASE, ll_base);
-		dev_priv->compressed_llb = compressed_llb;
-	}
+	DRM_DEBUG_KMS("reserved %d bytes of contiguous stolen space for FBC\n",
+		      size);
 
-	DRM_DEBUG_KMS("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n",
-		      (long)cfb_base, (long)ll_base, size >> 20);
-	return;
+	return 0;
 
-err_llb:
-	drm_mm_put_block(compressed_llb);
 err_fb:
 	drm_mm_put_block(compressed_fb);
 err:
-	dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
-	i915_warn_stolen(dev);
+	return -ENOSPC;
+}
+
+int i915_gem_stolen_setup_compression(struct drm_device *dev, int size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->mm.stolen_base == 0)
+		return -ENODEV;
+
+	if (size < dev_priv->cfb_size)
+		return 0;
+
+	/* Release any current block */
+	i915_gem_stolen_cleanup_compression(dev);
+
+	return i915_setup_compression(dev, size);
 }
 
-static void i915_cleanup_compression(struct drm_device *dev)
+void i915_gem_stolen_cleanup_compression(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	drm_mm_put_block(dev_priv->compressed_fb);
+	if (dev_priv->cfb_size == 0)
+		return;
+
+	if (dev_priv->compressed_fb)
+		drm_mm_put_block(dev_priv->compressed_fb);
+
 	if (dev_priv->compressed_llb)
 		drm_mm_put_block(dev_priv->compressed_llb);
+
+	dev_priv->cfb_size = 0;
 }
 
 void i915_gem_cleanup_stolen(struct drm_device *dev)
 {
-	if (I915_HAS_FBC(dev) && i915_powersave)
-		i915_cleanup_compression(dev);
+	i915_gem_stolen_cleanup_compression(dev);
 }
 
 int i915_gem_init_stolen(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long prealloc_size = dev_priv->mm.gtt->stolen_size;
 
 	dev_priv->mm.stolen_base = i915_stolen_to_physical(dev);
 	if (dev_priv->mm.stolen_base == 0)
@@ -182,21 +188,7 @@ int i915_gem_init_stolen(struct drm_device *dev)
 		      dev_priv->mm.gtt->stolen_size, dev_priv->mm.stolen_base);
 
 	/* Basic memrange allocator for stolen space */
-	drm_mm_init(&dev_priv->mm.stolen, 0, prealloc_size);
-
-	/* Try to set up FBC with a reasonable compressed buffer size */
-	if (I915_HAS_FBC(dev) && i915_powersave) {
-		int cfb_size;
-
-		/* Leave 1M for line length buffer & misc. */
-
-		/* Try to get a 32M buffer... */
-		if (prealloc_size > (36*1024*1024))
-			cfb_size = 32*1024*1024;
-		else /* fall back to 7/8 of the stolen space */
-			cfb_size = prealloc_size * 7 / 8;
-		i915_setup_compression(dev, cfb_size);
-	}
+	drm_mm_init(&dev_priv->mm.stolen, 0, dev_priv->mm.gtt->stolen_size);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 52b6b0e811bc..d303f2a90e70 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8655,6 +8655,9 @@ void intel_modeset_init(struct drm_device *dev)
 	/* Just disable it once at startup */
 	i915_disable_vga(dev);
 	intel_setup_outputs(dev);
+
+	/* Just in case the BIOS is doing something questionable. */
+	intel_disable_fbc(dev);
 }
 
 static void
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index f595b8d56cc3..abfff29ed13a 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -440,12 +440,6 @@ void intel_update_fbc(struct drm_device *dev)
 		dev_priv->no_fbc_reason = FBC_MODULE_PARAM;
 		goto out_disable;
 	}
-	if (intel_fb->obj->base.size > dev_priv->cfb_size) {
-		DRM_DEBUG_KMS("framebuffer too large, disabling "
-			      "compression\n");
-		dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
-		goto out_disable;
-	}
 	if ((crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) ||
 	    (crtc->mode.flags & DRM_MODE_FLAG_DBLSCAN)) {
 		DRM_DEBUG_KMS("mode incompatible with compression, "
@@ -479,6 +473,14 @@ void intel_update_fbc(struct drm_device *dev)
 	if (in_dbg_master())
 		goto out_disable;
 
+	if (i915_gem_stolen_setup_compression(dev, intel_fb->obj->base.size)) {
+		DRM_INFO("not enough stolen space for compressed buffer (need %zd bytes), disabling\n", intel_fb->obj->base.size);
+		DRM_INFO("hint: you may be able to increase stolen memory size in the BIOS to avoid this\n");
+		DRM_DEBUG_KMS("framebuffer too large, disabling compression\n");
+		dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
+		goto out_disable;
+	}
+
 	/* If the scanout has not changed, don't modify the FBC settings.
 	 * Note that we make the fundamental assumption that the fb->obj
 	 * cannot be unpinned (and have its GTT offset and fence revoked)
@@ -526,6 +528,7 @@ out_disable:
 		DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
 		intel_disable_fbc(dev);
 	}
+	i915_gem_stolen_cleanup_compression(dev);
 }
 
 static void i915_pineview_get_mem_freq(struct drm_device *dev)
-- 
cgit v1.2.3


From c1ad11fce86405c955873974f58ab305d894be78 Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Thu, 15 Nov 2012 11:32:21 +0000
Subject: drm/i915: Allow objects to be created with no backing pages, but
 stolen space

In order to accommodate objects that are not backed by struct pages, but
instead point into a contiguous region of stolen space, we need to make
various changes to avoid dereferencing obj->pages or obj->base.filp.

First introduce a marker for the stolen object, that specifies its
offset into the stolen region and implies that it has no backing pages.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 2 ++
 drivers/gpu/drm/i915/i915_drv.h     | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 62619e39533f..58e667687741 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -124,6 +124,8 @@ describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
 	if (obj->gtt_space != NULL)
 		seq_printf(m, " (gtt offset: %08x, size: %08x)",
 			   obj->gtt_offset, (unsigned int)obj->gtt_space->size);
+	if (obj->stolen)
+		seq_printf(m, " (stolen: %08lx)", obj->stolen->start);
 	if (obj->pin_mappable || obj->fault_mappable) {
 		char s[3], *t = s;
 		if (obj->pin_mappable)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 6969c722edf6..1646d036db09 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -962,6 +962,8 @@ struct drm_i915_gem_object {
 
 	/** Current space allocated to this object in the GTT, if any. */
 	struct drm_mm_node *gtt_space;
+	/** Stolen memory for this object, instead of being backed by shmem. */
+	struct drm_mm_node *stolen;
 	struct list_head gtt_list;
 
 	/** This object's place on the active/inactive lists */
-- 
cgit v1.2.3


From 960e3564bfa464f92549383d41659f2aaeee1420 Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Thu, 15 Nov 2012 11:32:23 +0000
Subject: drm/i915: Support readback of stolen objects upon error

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_irq.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 26753ee6571d..7a0ddee9751a 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -929,6 +929,14 @@ i915_error_object_create(struct drm_i915_private *dev_priv,
 						     reloc_offset);
 			memcpy_fromio(d, s, PAGE_SIZE);
 			io_mapping_unmap_atomic(s);
+		} else if (src->stolen) {
+			unsigned long offset;
+
+			offset = dev_priv->mm.stolen_base;
+			offset += src->stolen->start;
+			offset += i << PAGE_SHIFT;
+
+			memcpy_fromio(d, (void *)offset, PAGE_SIZE);
 		} else {
 			struct page *page;
 			void *s;
-- 
cgit v1.2.3


From 0104fdbb84d7adb0e377ed05bf75eba97b007544 Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Thu, 15 Nov 2012 11:32:26 +0000
Subject: drm/i915: Introduce i915_gem_object_create_stolen()

Allow for the creation of GEM objects backed by stolen memory. As these
are not backed by ordinary pages, we create a fake dma mapping and store
the address in the scatterlist rather than obj->pages.

v2: Mark _i915_gem_object_create_stolen() as static, as noticed by Jesse
Barnes.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h        |   3 +
 drivers/gpu/drm/i915/i915_gem.c        |   1 +
 drivers/gpu/drm/i915/i915_gem_stolen.c | 125 +++++++++++++++++++++++++++++++++
 3 files changed, 129 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 1646d036db09..d1d68f0b55e8 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1576,6 +1576,9 @@ int i915_gem_init_stolen(struct drm_device *dev);
 int i915_gem_stolen_setup_compression(struct drm_device *dev, int size);
 void i915_gem_stolen_cleanup_compression(struct drm_device *dev);
 void i915_gem_cleanup_stolen(struct drm_device *dev);
+struct drm_i915_gem_object *
+i915_gem_object_create_stolen(struct drm_device *dev, u32 size);
+void i915_gem_object_release_stolen(struct drm_i915_gem_object *obj);
 
 /* i915_gem_tiling.c */
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 5c8df572cd17..3de62b0127a5 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3772,6 +3772,7 @@ void i915_gem_free_object(struct drm_gem_object *gem_obj)
 	obj->pages_pin_count = 0;
 	i915_gem_object_put_pages(obj);
 	i915_gem_object_free_mmap_offset(obj);
+	i915_gem_object_release_stolen(obj);
 
 	BUG_ON(obj->pages);
 
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index 10ca473d85f2..7299d632663c 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -192,3 +192,128 @@ int i915_gem_init_stolen(struct drm_device *dev)
 
 	return 0;
 }
+
+static struct sg_table *
+i915_pages_create_for_stolen(struct drm_device *dev,
+			     u32 offset, u32 size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct sg_table *st;
+	struct scatterlist *sg;
+
+	DRM_DEBUG_DRIVER("offset=0x%x, size=%d\n", offset, size);
+	BUG_ON(offset > dev_priv->mm.gtt->stolen_size - size);
+
+	/* We hide that we have no struct page backing our stolen object
+	 * by wrapping the contiguous physical allocation with a fake
+	 * dma mapping in a single scatterlist.
+	 */
+
+	st = kmalloc(sizeof(*st), GFP_KERNEL);
+	if (st == NULL)
+		return NULL;
+
+	if (sg_alloc_table(st, 1, GFP_KERNEL)) {
+		kfree(st);
+		return NULL;
+	}
+
+	sg = st->sgl;
+	sg->offset = offset;
+	sg->length = size;
+
+	sg_dma_address(sg) = (dma_addr_t)dev_priv->mm.stolen_base + offset;
+	sg_dma_len(sg) = size;
+
+	return st;
+}
+
+static int i915_gem_object_get_pages_stolen(struct drm_i915_gem_object *obj)
+{
+	BUG();
+	return -EINVAL;
+}
+
+static void i915_gem_object_put_pages_stolen(struct drm_i915_gem_object *obj)
+{
+	/* Should only be called during free */
+	sg_free_table(obj->pages);
+	kfree(obj->pages);
+}
+
+static const struct drm_i915_gem_object_ops i915_gem_object_stolen_ops = {
+	.get_pages = i915_gem_object_get_pages_stolen,
+	.put_pages = i915_gem_object_put_pages_stolen,
+};
+
+static struct drm_i915_gem_object *
+_i915_gem_object_create_stolen(struct drm_device *dev,
+			       struct drm_mm_node *stolen)
+{
+	struct drm_i915_gem_object *obj;
+
+	obj = kzalloc(sizeof(*obj), GFP_KERNEL);
+	if (obj == NULL)
+		return NULL;
+
+	if (drm_gem_private_object_init(dev, &obj->base, stolen->size))
+		goto cleanup;
+
+	i915_gem_object_init(obj, &i915_gem_object_stolen_ops);
+
+	obj->pages = i915_pages_create_for_stolen(dev,
+						  stolen->start, stolen->size);
+	if (obj->pages == NULL)
+		goto cleanup;
+
+	obj->has_dma_mapping = true;
+	obj->pages_pin_count = 1;
+	obj->stolen = stolen;
+
+	obj->base.write_domain = I915_GEM_DOMAIN_GTT;
+	obj->base.read_domains = I915_GEM_DOMAIN_GTT;
+	obj->cache_level = I915_CACHE_NONE;
+
+	return obj;
+
+cleanup:
+	kfree(obj);
+	return NULL;
+}
+
+struct drm_i915_gem_object *
+i915_gem_object_create_stolen(struct drm_device *dev, u32 size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	struct drm_mm_node *stolen;
+
+	if (dev_priv->mm.stolen_base == 0)
+		return NULL;
+
+	DRM_DEBUG_KMS("creating stolen object: size=%x\n", size);
+	if (size == 0)
+		return NULL;
+
+	stolen = drm_mm_search_free(&dev_priv->mm.stolen, size, 4096, 0);
+	if (stolen)
+		stolen = drm_mm_get_block(stolen, size, 4096);
+	if (stolen == NULL)
+		return NULL;
+
+	obj = _i915_gem_object_create_stolen(dev, stolen);
+	if (obj)
+		return obj;
+
+	drm_mm_put_block(stolen);
+	return NULL;
+}
+
+void
+i915_gem_object_release_stolen(struct drm_i915_gem_object *obj)
+{
+	if (obj->stolen) {
+		drm_mm_put_block(obj->stolen);
+		obj->stolen = NULL;
+	}
+}
-- 
cgit v1.2.3


From 0ffb0ff283cca16f72caf29c44496d83b0c291fb Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Thu, 15 Nov 2012 11:32:27 +0000
Subject: drm/i915: Allocate fbcon from stolen memory

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_fb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 7b30b5c2c4ee..b7773e548911 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -83,7 +83,9 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
 
 	size = mode_cmd.pitches[0] * mode_cmd.height;
 	size = ALIGN(size, PAGE_SIZE);
-	obj = i915_gem_alloc_object(dev, size);
+	obj = i915_gem_object_create_stolen(dev, size);
+	if (obj == NULL)
+		obj = i915_gem_alloc_object(dev, size);
 	if (!obj) {
 		DRM_ERROR("failed to allocate framebuffer\n");
 		ret = -ENOMEM;
-- 
cgit v1.2.3


From ebc052e0c65f84f68626e388ffa1704b3a190ef7 Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Thu, 15 Nov 2012 11:32:28 +0000
Subject: drm/i915: Allocate ringbuffers from stolen memory

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index bc7cf7c63108..36e1e13ae946 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1113,7 +1113,11 @@ static int intel_init_ring_buffer(struct drm_device *dev,
 			return ret;
 	}
 
-	obj = i915_gem_alloc_object(dev, ring->size);
+	obj = NULL;
+	if (!HAS_LLC(dev))
+		obj = i915_gem_object_create_stolen(dev, ring->size);
+	if (obj == NULL)
+		obj = i915_gem_alloc_object(dev, ring->size);
 	if (obj == NULL) {
 		DRM_ERROR("Failed to allocate ringbuffer\n");
 		ret = -ENOMEM;
-- 
cgit v1.2.3


From 8040513870399f1cb032cb8bc805df5042fedcdf Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Thu, 15 Nov 2012 11:32:29 +0000
Subject: drm/i915: Allocate overlay registers from stolen memory

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_overlay.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index d7bc817f51a0..fabe0acf808d 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -1333,8 +1333,10 @@ void intel_setup_overlay(struct drm_device *dev)
 
 	overlay->dev = dev;
 
-	reg_bo = i915_gem_alloc_object(dev, PAGE_SIZE);
-	if (!reg_bo)
+	reg_bo = i915_gem_object_create_stolen(dev, PAGE_SIZE);
+	if (reg_bo == NULL)
+		reg_bo = i915_gem_alloc_object(dev, PAGE_SIZE);
+	if (reg_bo == NULL)
 		goto out_free;
 	overlay->reg_bo = reg_bo;
 
-- 
cgit v1.2.3


From 42dcedd4f2e715dc0313e359c8288e6397843fff Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Thu, 15 Nov 2012 11:32:30 +0000
Subject: drm/i915: Use a slab for object allocation

The primary purpose of this was to debug some use-after-free memory
corruption that was causing an OOPS inside drm/i915. As it turned out
the corruption was being caused elsewhere and i915.ko as a major user of
many objects was being hit hardest.

Indeed as we do frequent the generic kmalloc caches, dedicating one to
ourselves (or at least naming one for us depending upon the core) aids
debugging our own slab usage.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_dma.c        |  3 +++
 drivers/gpu/drm/i915/i915_drv.h        |  4 ++++
 drivers/gpu/drm/i915/i915_gem.c        | 28 +++++++++++++++++++++++-----
 drivers/gpu/drm/i915/i915_gem_dmabuf.c |  5 ++---
 drivers/gpu/drm/i915/i915_gem_stolen.c |  4 ++--
 5 files changed, 34 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 80ed75117b6d..2635ee6a34d4 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1736,6 +1736,9 @@ int i915_driver_unload(struct drm_device *dev)
 
 	destroy_workqueue(dev_priv->wq);
 
+	if (dev_priv->slab)
+		kmem_cache_destroy(dev_priv->slab);
+
 	pci_dev_put(dev_priv->bridge_dev);
 	kfree(dev->dev_private);
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index d1d68f0b55e8..e2944e9bc750 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -614,6 +614,7 @@ struct intel_l3_parity {
 
 typedef struct drm_i915_private {
 	struct drm_device *dev;
+	struct kmem_cache *slab;
 
 	const struct intel_device_info *info;
 
@@ -1379,12 +1380,15 @@ int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
 int i915_gem_wait_ioctl(struct drm_device *dev, void *data,
 			struct drm_file *file_priv);
 void i915_gem_load(struct drm_device *dev);
+void *i915_gem_object_alloc(struct drm_device *dev);
+void i915_gem_object_free(struct drm_i915_gem_object *obj);
 int i915_gem_init_object(struct drm_gem_object *obj);
 void i915_gem_object_init(struct drm_i915_gem_object *obj,
 			 const struct drm_i915_gem_object_ops *ops);
 struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
 						  size_t size);
 void i915_gem_free_object(struct drm_gem_object *obj);
+
 int __must_check i915_gem_object_pin(struct drm_i915_gem_object *obj,
 				     uint32_t alignment,
 				     bool map_and_fenceable,
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 3de62b0127a5..dfe7174a7c03 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -192,6 +192,18 @@ i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
 	return 0;
 }
 
+void *i915_gem_object_alloc(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	return kmem_cache_alloc(dev_priv->slab, GFP_KERNEL | __GFP_ZERO);
+}
+
+void i915_gem_object_free(struct drm_i915_gem_object *obj)
+{
+	struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
+	kmem_cache_free(dev_priv->slab, obj);
+}
+
 static int
 i915_gem_create(struct drm_file *file,
 		struct drm_device *dev,
@@ -215,7 +227,7 @@ i915_gem_create(struct drm_file *file,
 	if (ret) {
 		drm_gem_object_release(&obj->base);
 		i915_gem_info_remove_obj(dev->dev_private, obj->base.size);
-		kfree(obj);
+		i915_gem_object_free(obj);
 		return ret;
 	}
 
@@ -3695,12 +3707,12 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
 	struct address_space *mapping;
 	u32 mask;
 
-	obj = kzalloc(sizeof(*obj), GFP_KERNEL);
+	obj = i915_gem_object_alloc(dev);
 	if (obj == NULL)
 		return NULL;
 
 	if (drm_gem_object_init(dev, &obj->base, size) != 0) {
-		kfree(obj);
+		i915_gem_object_free(obj);
 		return NULL;
 	}
 
@@ -3783,7 +3795,7 @@ void i915_gem_free_object(struct drm_gem_object *gem_obj)
 	i915_gem_info_remove_obj(dev_priv, obj->base.size);
 
 	kfree(obj->bit_17);
-	kfree(obj);
+	i915_gem_object_free(obj);
 }
 
 int
@@ -4101,8 +4113,14 @@ init_ring_lists(struct intel_ring_buffer *ring)
 void
 i915_gem_load(struct drm_device *dev)
 {
-	int i;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	int i;
+
+	dev_priv->slab =
+		kmem_cache_create("i915_gem_object",
+				  sizeof(struct drm_i915_gem_object), 0,
+				  SLAB_HWCACHE_ALIGN,
+				  NULL);
 
 	INIT_LIST_HEAD(&dev_priv->mm.active_list);
 	INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
diff --git a/drivers/gpu/drm/i915/i915_gem_dmabuf.c b/drivers/gpu/drm/i915/i915_gem_dmabuf.c
index 773ef77b6c22..defb888ef7f5 100644
--- a/drivers/gpu/drm/i915/i915_gem_dmabuf.c
+++ b/drivers/gpu/drm/i915/i915_gem_dmabuf.c
@@ -276,8 +276,7 @@ struct drm_gem_object *i915_gem_prime_import(struct drm_device *dev,
 	if (IS_ERR(attach))
 		return ERR_CAST(attach);
 
-
-	obj = kzalloc(sizeof(*obj), GFP_KERNEL);
+	obj = i915_gem_object_alloc(dev);
 	if (obj == NULL) {
 		ret = -ENOMEM;
 		goto fail_detach;
@@ -285,7 +284,7 @@ struct drm_gem_object *i915_gem_prime_import(struct drm_device *dev,
 
 	ret = drm_gem_private_object_init(dev, &obj->base, dma_buf->size);
 	if (ret) {
-		kfree(obj);
+		i915_gem_object_free(obj);
 		goto fail_detach;
 	}
 
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index 7299d632663c..f817b0cac116 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -252,7 +252,7 @@ _i915_gem_object_create_stolen(struct drm_device *dev,
 {
 	struct drm_i915_gem_object *obj;
 
-	obj = kzalloc(sizeof(*obj), GFP_KERNEL);
+	obj = i915_gem_object_alloc(dev);
 	if (obj == NULL)
 		return NULL;
 
@@ -277,7 +277,7 @@ _i915_gem_object_create_stolen(struct drm_device *dev,
 	return obj;
 
 cleanup:
-	kfree(obj);
+	i915_gem_object_free(obj);
 	return NULL;
 }
 
-- 
cgit v1.2.3


From 4239ca779dbe47a310a3106d9f4cd5458014bdb6 Mon Sep 17 00:00:00 2001
From: Damien Lespiau
Date: Mon, 3 Dec 2012 16:26:16 +0000
Subject: drm/i915: Fix dieing -> dying typo

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index dfe7174a7c03..b68bc02745db 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2818,7 +2818,7 @@ static bool i915_gem_valid_gtt_space(struct drm_device *dev,
 
 	/* On non-LLC machines we have to be careful when putting differing
 	 * types of snoopable memory together to avoid the prefetcher
-	 * crossing memory domains and dieing.
+	 * crossing memory domains and dying.
 	 */
 	if (HAS_LLC(dev))
 		return true;
-- 
cgit v1.2.3


From 2a2d548240ff5f5bd826640bdf8baa016ab6cec4 Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Mon, 3 Dec 2012 11:49:06 +0000
Subject: drm/i915: Tighten the checks for invalid relocation domains

Be specific for the GPU domains so that we can detect if userspace ever
passed in an invalid combination, as well as accurately reflect the
known GPU domains when printing state.

Fixes i-g-t/gem_exec_bad_domains

References: https://bugs.freedesktop.org/show_bug.cgi?id=57826
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e2944e9bc750..3473298a137f 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -83,7 +83,12 @@ enum port {
 };
 #define port_name(p) ((p) + 'A')
 
-#define I915_GEM_GPU_DOMAINS	(~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+#define I915_GEM_GPU_DOMAINS \
+	(I915_GEM_DOMAIN_RENDER | \
+	 I915_GEM_DOMAIN_SAMPLER | \
+	 I915_GEM_DOMAIN_COMMAND | \
+	 I915_GEM_DOMAIN_INSTRUCTION | \
+	 I915_GEM_DOMAIN_VERTEX)
 
 #define for_each_pipe(p) for ((p) = 0; (p) < dev_priv->num_pipe; (p)++)
 
-- 
cgit v1.2.3


From c1f093e09c4ceb583b04d11e767bb3201812e4d2 Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Mon, 3 Dec 2012 11:49:07 +0000
Subject: drm/i915: Remove check for conflicting relocation write-domains

Simply use the last write-domain set for the object in the batch,
trusting userspace to have correctly flushed the caches between usage as
a write target. This check dates back from the golden age of having only
a single operation per batch with the kernel repeating it for each
cliprect, and conflicts both with userspace trying to efficiently batch
multiple operations and with reducing the kernel overhead of relocation
processing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem_execbuffer.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 802d925b2b57..6cd3e1c1629e 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -150,17 +150,6 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
 			  reloc->write_domain);
 		return ret;
 	}
-	if (unlikely(reloc->write_domain && target_obj->pending_write_domain &&
-		     reloc->write_domain != target_obj->pending_write_domain)) {
-		DRM_DEBUG("Write domain conflict: "
-			  "obj %p target %d offset %d "
-			  "new %08x old %08x\n",
-			  obj, reloc->target_handle,
-			  (int) reloc->offset,
-			  reloc->write_domain,
-			  target_obj->pending_write_domain);
-		return ret;
-	}
 
 	target_obj->pending_read_domains |= reloc->read_domains;
 	target_obj->pending_write_domain |= reloc->write_domain;
-- 
cgit v1.2.3


From 1a240d4de2ccf40de5796a4d1dbb3a0236051fc9 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Thu, 29 Nov 2012 22:18:51 +0100
Subject: drm/i915: fixup sparse warnings

- __iomem where there is none (I love how we mix these things up).
- Use gfp_t instead of an other plain type.
- Unconfuse one place about enum pipe vs enum transcoder - for the pch
  transcoder we actually use the pipe enum. Fixup the other cases
  where we assign the pipe to the cpu transcoder with explicit casts.
- Declare the mch_lock properly in a header.

There is still a decent mess in intel_bios.c about __iomem, but heck,
this is x86 and we're allowed to do that.

Makes-sparse-happy: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Use a space after the cast consistently and fix up the
newly-added cast in i915_irq.c to properly use __iomem.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_debugfs.c  | 4 ++--
 drivers/gpu/drm/i915/i915_drv.h      | 3 +++
 drivers/gpu/drm/i915/i915_gem.c      | 2 +-
 drivers/gpu/drm/i915/i915_irq.c      | 5 +----
 drivers/gpu/drm/i915/intel_ddi.c     | 2 +-
 drivers/gpu/drm/i915/intel_display.c | 9 +++++----
 6 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 58e667687741..ce60506b574b 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -546,11 +546,11 @@ static int i915_hws_info(struct seq_file *m, void *data)
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct intel_ring_buffer *ring;
-	const volatile u32 __iomem *hws;
+	const u32 *hws;
 	int i;
 
 	ring = &dev_priv->ring[(uintptr_t)node->info_ent->data];
-	hws = (volatile u32 __iomem *)ring->status_page.page_addr;
+	hws = ring->status_page.page_addr;
 	if (hws == NULL)
 		return 0;
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 3473298a137f..bb0eb0f8f6b3 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -577,6 +577,9 @@ struct intel_gen6_power_mgmt {
 	struct mutex hw_lock;
 };
 
+/* defined intel_pm.c */
+extern spinlock_t mchdev_lock;
+
 struct intel_ilk_power_mgmt {
 	u8 cur_delay;
 	u8 min_delay;
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index b68bc02745db..cb941448c2bc 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3705,7 +3705,7 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
 {
 	struct drm_i915_gem_object *obj;
 	struct address_space *mapping;
-	u32 mask;
+	gfp_t mask;
 
 	obj = i915_gem_object_alloc(dev);
 	if (obj == NULL)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 7a0ddee9751a..68e7cafa13de 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -300,9 +300,6 @@ static void i915_hotplug_work_func(struct work_struct *work)
 	drm_helper_hpd_irq_event(dev);
 }
 
-/* defined intel_pm.c */
-extern spinlock_t mchdev_lock;
-
 static void ironlake_handle_rps_change(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
@@ -936,7 +933,7 @@ i915_error_object_create(struct drm_i915_private *dev_priv,
 			offset += src->stolen->start;
 			offset += i << PAGE_SHIFT;
 
-			memcpy_fromio(d, (void *)offset, PAGE_SIZE);
+			memcpy_fromio(d, (void __iomem *) offset, PAGE_SIZE);
 		} else {
 			struct page *page;
 			void *s;
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index ad936c68e4cb..f02b3feff504 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1044,7 +1044,7 @@ bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
 	if (port == PORT_A)
 		cpu_transcoder = TRANSCODER_EDP;
 	else
-		cpu_transcoder = pipe;
+		cpu_transcoder = (enum transcoder) pipe;
 
 	tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d303f2a90e70..093a163d4b1c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1671,7 +1671,7 @@ static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
 	BUG_ON(dev_priv->info->gen < 5);
 
 	/* FDI must be feeding us bits for PCH ports */
-	assert_fdi_tx_enabled(dev_priv, cpu_transcoder);
+	assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
 	assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
 
 	/* Workaround: set timing override bit. */
@@ -1759,7 +1759,7 @@ static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
 {
 	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
 								      pipe);
-	enum transcoder pch_transcoder;
+	enum pipe pch_transcoder;
 	int reg;
 	u32 val;
 
@@ -1779,7 +1779,8 @@ static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
 		if (pch_port) {
 			/* if driving the PCH, we need FDI enabled */
 			assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
-			assert_fdi_tx_pll_enabled(dev_priv, cpu_transcoder);
+			assert_fdi_tx_pll_enabled(dev_priv,
+						  (enum pipe) cpu_transcoder);
 		}
 		/* FIXME: assert CPU port conditions for SNB+ */
 	}
@@ -3598,7 +3599,7 @@ static void haswell_crtc_off(struct drm_crtc *crtc)
 
 	/* Stop saying we're using TRANSCODER_EDP because some other CRTC might
 	 * start using it. */
-	intel_crtc->cpu_transcoder = intel_crtc->pipe;
+	intel_crtc->cpu_transcoder = (enum transcoder) intel_crtc->pipe;
 
 	intel_ddi_put_crtc_pll(crtc);
 }
-- 
cgit v1.2.3


From 40633219a0ff4953601c7b2326f8faabc0171fd9 Mon Sep 17 00:00:00 2001
From: Mika Kuoppala
Date: Tue, 4 Dec 2012 15:12:00 +0200
Subject: drm/i915: Add debugfs entry to read/write next_seqno

This is needed for testing seqno wrapping. Be careful to not bump next_seqno
more than 0x7FFFFFFF at a time (between some handled requests) as
i915_seqno_passed() can't handle bigger difference in between.

v2: Address review comments from Chris Wilson.

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Squash in fixup to properly remove the debugfs file on driver
unload again.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 88 +++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index ce60506b574b..602058fb5e25 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -843,6 +843,86 @@ static const struct file_operations i915_error_state_fops = {
 	.release = i915_error_state_release,
 };
 
+static ssize_t
+i915_next_seqno_read(struct file *filp,
+		 char __user *ubuf,
+		 size_t max,
+		 loff_t *ppos)
+{
+	struct drm_device *dev = filp->private_data;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	char buf[80];
+	int len;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	len = snprintf(buf, sizeof(buf),
+		       "next_seqno :  0x%x\n",
+		       dev_priv->next_seqno);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	if (len > sizeof(buf))
+		len = sizeof(buf);
+
+	return simple_read_from_buffer(ubuf, max, ppos, buf, len);
+}
+
+static ssize_t
+i915_next_seqno_write(struct file *filp,
+		      const char __user *ubuf,
+		      size_t cnt,
+		      loff_t *ppos)
+{
+	struct drm_device *dev = filp->private_data;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	char buf[20];
+	u32 val = 1;
+	int ret;
+
+	if (cnt > 0) {
+		if (cnt > sizeof(buf) - 1)
+			return -EINVAL;
+
+		if (copy_from_user(buf, ubuf, cnt))
+			return -EFAULT;
+		buf[cnt] = 0;
+
+		ret = kstrtouint(buf, 0, &val);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (val == 0)
+		return -EINVAL;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	if (i915_seqno_passed(val, dev_priv->next_seqno)) {
+		dev_priv->next_seqno = val;
+		DRM_DEBUG_DRIVER("Advancing seqno to %u\n", val);
+	} else {
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return ret ?: cnt;
+}
+
+static const struct file_operations i915_next_seqno_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read = i915_next_seqno_read,
+	.write = i915_next_seqno_write,
+	.llseek = default_llseek,
+};
+
 static int i915_rstdby_delays(struct seq_file *m, void *unused)
 {
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
@@ -2107,6 +2187,12 @@ int i915_debugfs_init(struct drm_minor *minor)
 	if (ret)
 		return ret;
 
+	ret = i915_debugfs_create(minor->debugfs_root, minor,
+				 "i915_next_seqno",
+				 &i915_next_seqno_fops);
+	if (ret)
+		return ret;
+
 	return drm_debugfs_create_files(i915_debugfs_list,
 					I915_DEBUGFS_ENTRIES,
 					minor->debugfs_root, minor);
@@ -2130,6 +2216,8 @@ void i915_debugfs_cleanup(struct drm_minor *minor)
 				 1, minor);
 	drm_debugfs_remove_files((struct drm_info_list *) &i915_error_state_fops,
 				 1, minor);
+	drm_debugfs_remove_files((struct drm_info_list *) &i915_next_seqno_fops,
+				 1, minor);
 }
 
 #endif /* CONFIG_DEBUG_FS */
-- 
cgit v1.2.3


From 43a7b924a920729ff775e6a847f671d0ea456801 Mon Sep 17 00:00:00 2001
From: Mika Kuoppala
Date: Tue, 4 Dec 2012 15:12:01 +0200
Subject: drm/i915: Fix debugfs seqno info print to use uint

seqno's are u32 so print accordingly

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 602058fb5e25..7e516eebdc80 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -389,7 +389,7 @@ static void i915_ring_seqno_info(struct seq_file *m,
 				 struct intel_ring_buffer *ring)
 {
 	if (ring->get_seqno) {
-		seq_printf(m, "Current sequence (%s): %d\n",
+		seq_printf(m, "Current sequence (%s): %u\n",
 			   ring->name, ring->get_seqno(ring, false));
 	}
 }
-- 
cgit v1.2.3


From cbcc80dff3896015385c67d6be0beb3399999e5c Mon Sep 17 00:00:00 2001
From: Mika Kuoppala
Date: Tue, 4 Dec 2012 15:12:03 +0200
Subject: drm/i915: Split intel_ring_begin

In preparation for handling ring seqno wrapping, split
intel_ring_begin into helper part which doesn't allocate
seqno.

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 37 ++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 36e1e13ae946..01a660a7c167 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1363,11 +1363,31 @@ intel_ring_alloc_seqno(struct intel_ring_buffer *ring)
 	return i915_gem_get_seqno(ring->dev, &ring->outstanding_lazy_request);
 }
 
+static int __intel_ring_begin(struct intel_ring_buffer *ring,
+			      int bytes)
+{
+	int ret;
+
+	if (unlikely(ring->tail + bytes > ring->effective_size)) {
+		ret = intel_wrap_ring_buffer(ring);
+		if (unlikely(ret))
+			return ret;
+	}
+
+	if (unlikely(ring->space < bytes)) {
+		ret = ring_wait_for_space(ring, bytes);
+		if (unlikely(ret))
+			return ret;
+	}
+
+	ring->space -= bytes;
+	return 0;
+}
+
 int intel_ring_begin(struct intel_ring_buffer *ring,
 		     int num_dwords)
 {
 	drm_i915_private_t *dev_priv = ring->dev->dev_private;
-	int n = 4*num_dwords;
 	int ret;
 
 	ret = i915_gem_check_wedge(dev_priv, dev_priv->mm.interruptible);
@@ -1379,20 +1399,7 @@ int intel_ring_begin(struct intel_ring_buffer *ring,
 	if (ret)
 		return ret;
 
-	if (unlikely(ring->tail + n > ring->effective_size)) {
-		ret = intel_wrap_ring_buffer(ring);
-		if (unlikely(ret))
-			return ret;
-	}
-
-	if (unlikely(ring->space < n)) {
-		ret = ring_wait_for_space(ring, n);
-		if (unlikely(ret))
-			return ret;
-	}
-
-	ring->space -= n;
-	return 0;
+	return __intel_ring_begin(ring, num_dwords * sizeof(uint32_t));
 }
 
 void intel_ring_advance(struct intel_ring_buffer *ring)
-- 
cgit v1.2.3


From 498d2ac15ce0fc08edb005a7faf9ed6b5aa028d8 Mon Sep 17 00:00:00 2001
From: Mika Kuoppala
Date: Tue, 4 Dec 2012 15:12:04 +0200
Subject: drm/i915: Add intel_ring_handle_seqno wrap

If there are pre-wrap values in semaphore-mbox registers after wrap,
syncing against some after-wrap request will complete immediately.
Fix this by emitting ring commands to set mbox registers to zero
when the wrap happens.

v2: Use __intel_ring_begin to emit ring commands, from
Chris Wilson.

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add a small comment to handle_seqno_wrap.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem.c         |  4 ++++
 drivers/gpu/drm/i915/intel_ringbuffer.c | 22 ++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_ringbuffer.h |  2 +-
 3 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index cb941448c2bc..02d315164aa9 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1952,6 +1952,10 @@ i915_gem_handle_seqno_wrap(struct drm_device *dev)
 
 	i915_gem_retire_requests(dev);
 	for_each_ring(ring, dev_priv, i) {
+		ret = intel_ring_handle_seqno_wrap(ring);
+		if (ret)
+			return ret;
+
 		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
 			ring->sync_seqno[j] = 0;
 	}
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 01a660a7c167..0d03dc649c5e 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1402,6 +1402,28 @@ int intel_ring_begin(struct intel_ring_buffer *ring,
 	return __intel_ring_begin(ring, num_dwords * sizeof(uint32_t));
 }
 
+int intel_ring_handle_seqno_wrap(struct intel_ring_buffer *ring)
+{
+	int ret;
+
+	BUG_ON(ring->outstanding_lazy_request);
+
+	if (INTEL_INFO(ring->dev)->gen < 6)
+		return 0;
+
+	ret = __intel_ring_begin(ring, 6 * sizeof(uint32_t));
+	if (ret)
+		return ret;
+
+	/* Leaving a stale, pre-wrap seqno behind in the mboxes will result in
+	 * post-wrap semaphore waits completing immediately. Clear them. */
+	update_mboxes(ring, ring->signal_mbox[0]);
+	update_mboxes(ring, ring->signal_mbox[1]);
+	intel_ring_advance(ring);
+
+	return 0;
+}
+
 void intel_ring_advance(struct intel_ring_buffer *ring)
 {
 	struct drm_i915_private *dev_priv = ring->dev->dev_private;
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index d4b7416fa1b0..b4a533e53fd1 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -196,7 +196,7 @@ static inline void intel_ring_emit(struct intel_ring_buffer *ring,
 }
 void intel_ring_advance(struct intel_ring_buffer *ring);
 int __must_check intel_ring_idle(struct intel_ring_buffer *ring);
-
+int __must_check intel_ring_handle_seqno_wrap(struct intel_ring_buffer *ring);
 int intel_ring_flush_all_caches(struct intel_ring_buffer *ring);
 int intel_ring_invalidate_all_caches(struct intel_ring_buffer *ring);
 
-- 
cgit v1.2.3


From 4a06e201dae98ed893bae677b7b05bff29fcbab0 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Sat, 1 Dec 2012 13:53:40 +0100
Subject: drm/i915: haswell has the same irq handlers as ivb

No need to have the exaxt same code twice.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_irq.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 68e7cafa13de..2aa23e7fc2ab 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2711,7 +2711,7 @@ void intel_irq_init(struct drm_device *dev)
 		dev->driver->irq_uninstall = valleyview_irq_uninstall;
 		dev->driver->enable_vblank = valleyview_enable_vblank;
 		dev->driver->disable_vblank = valleyview_disable_vblank;
-	} else if (IS_IVYBRIDGE(dev)) {
+	} else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
 		/* Share pre & uninstall handlers with ILK/SNB */
 		dev->driver->irq_handler = ivybridge_irq_handler;
 		dev->driver->irq_preinstall = ironlake_irq_preinstall;
@@ -2719,14 +2719,6 @@ void intel_irq_init(struct drm_device *dev)
 		dev->driver->irq_uninstall = ironlake_irq_uninstall;
 		dev->driver->enable_vblank = ivybridge_enable_vblank;
 		dev->driver->disable_vblank = ivybridge_disable_vblank;
-	} else if (IS_HASWELL(dev)) {
-		/* Share interrupts handling with IVB */
-		dev->driver->irq_handler = ivybridge_irq_handler;
-		dev->driver->irq_preinstall = ironlake_irq_preinstall;
-		dev->driver->irq_postinstall = ivybridge_irq_postinstall;
-		dev->driver->irq_uninstall = ironlake_irq_uninstall;
-		dev->driver->enable_vblank = ivybridge_enable_vblank;
-		dev->driver->disable_vblank = ivybridge_disable_vblank;
 	} else if (HAS_PCH_SPLIT(dev)) {
 		dev->driver->irq_handler = ironlake_irq_handler;
 		dev->driver->irq_preinstall = ironlake_irq_preinstall;
-- 
cgit v1.2.3


From d83779a9cb9374977c1c05364b4d7dfe9ec68ef3 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Sat, 1 Dec 2012 13:53:41 +0100
Subject: drm/i915: don't handle PIPE_LEGACY_BLC_EVENT_STATUS on vlv

This is for legacy legacy stuff, and checking with the leftover
pipe from the previous loop is propably not what we want. Since
pipe == 2 after the loop ... Then we only assing a variable and do
nothing with it.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_irq.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 2aa23e7fc2ab..935b6b7bae73 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -530,7 +530,6 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)
 	unsigned long irqflags;
 	int pipe;
 	u32 pipe_stats[I915_MAX_PIPES];
-	bool blc_event;
 
 	atomic_inc(&dev_priv->irq_received);
 
@@ -587,9 +586,6 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)
 			I915_READ(PORT_HOTPLUG_STAT);
 		}
 
-		if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
-			blc_event = true;
-
 		if (pm_iir & GEN6_PM_DEFERRED_EVENTS)
 			gen6_queue_rps_work(dev_priv, pm_iir);
 
-- 
cgit v1.2.3


From 61bac78e03d4385e225cb2837e33974feda489c2 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Sat, 1 Dec 2012 21:03:21 +0100
Subject: drm/i915: setup the hangcheck timer early

... together with all the other irq related resources in
intel_irq_init. I've managed to oops in the notify_ring function on my
ilk, presumably because of the powerctx setup call to i915_gpu_idle.

Note that this is only a problem with the reorder irq setup sequence
for irq-driver gmbus/dp aux.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_dma.c | 3 ---
 drivers/gpu/drm/i915/i915_irq.c | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 2635ee6a34d4..901f8fc3ed88 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1611,9 +1611,6 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	intel_opregion_init(dev);
 	acpi_video_register();
 
-	setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
-		    (unsigned long) dev);
-
 	if (IS_GEN5(dev))
 		intel_gpu_ips_init(dev_priv);
 
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 935b6b7bae73..568820bf4587 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2687,6 +2687,9 @@ void intel_irq_init(struct drm_device *dev)
 	INIT_WORK(&dev_priv->rps.work, gen6_pm_rps_work);
 	INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work);
 
+	setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
+		    (unsigned long) dev);
+
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
 	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
 	if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
-- 
cgit v1.2.3


From 52d7ecedac3f96fb562cb482c139015372728638 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Sat, 1 Dec 2012 21:03:22 +0100
Subject: drm/i915: reorder setup sequence to have irqs for output setup

Otherwise the new&shiny irq-driven gmbus and dp aux code won't work that
well. Noticed since the dp aux code doesn't have an automatic fallback
with a timeout (since the hw provides for that already).

v2: Simple move drm_irq_install before intel_modeset_gem_init, as
suggested by Ben Widawsky.

v3: Now that interrupts are enabled before all connectors are fully
set up, we might fall over serving a HPD interrupt while things are
still being set up. Instead of jumping through massive hoops and
complicating the code with a separate hpd irq enable step, simply
block out the hotplug work item from doing anything until things are
in place.

v4: Actually, we can enable hotplug processing only after the fbdev is
fully set up, since we call down into the fbdev from the hotplug work
functions. So stick the hpd enabling right next to the poll helper
initialization.

v5: We need to enable irqs before intel_modeset_init, since that
function sets up the outputs.

v6: Fixup cleanup sequence, too.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_dma.c | 23 ++++++++++++++---------
 drivers/gpu/drm/i915/i915_drv.h |  1 +
 drivers/gpu/drm/i915/i915_irq.c |  4 ++++
 3 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 901f8fc3ed88..14d679ab52b7 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1294,19 +1294,21 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	if (ret)
 		goto cleanup_vga_switcheroo;
 
+	ret = drm_irq_install(dev);
+	if (ret)
+		goto cleanup_gem_stolen;
+
+	/* Important: The output setup functions called by modeset_init need
+	 * working irqs for e.g. gmbus and dp aux transfers. */
 	intel_modeset_init(dev);
 
 	ret = i915_gem_init(dev);
 	if (ret)
-		goto cleanup_gem_stolen;
-
-	intel_modeset_gem_init(dev);
+		goto cleanup_irq;
 
 	INIT_WORK(&dev_priv->console_resume_work, intel_console_resume);
 
-	ret = drm_irq_install(dev);
-	if (ret)
-		goto cleanup_gem;
+	intel_modeset_gem_init(dev);
 
 	/* Always safe in the mode setting case. */
 	/* FIXME: do pre/post-mode set stuff in core KMS code */
@@ -1314,7 +1316,10 @@ static int i915_load_modeset_init(struct drm_device *dev)
 
 	ret = intel_fbdev_init(dev);
 	if (ret)
-		goto cleanup_irq;
+		goto cleanup_gem;
+
+	/* Only enable hotplug handling once the fbdev is fully set up. */
+	dev_priv->enable_hotplug_processing = true;
 
 	drm_kms_helper_poll_init(dev);
 
@@ -1323,13 +1328,13 @@ static int i915_load_modeset_init(struct drm_device *dev)
 
 	return 0;
 
-cleanup_irq:
-	drm_irq_uninstall(dev);
 cleanup_gem:
 	mutex_lock(&dev->struct_mutex);
 	i915_gem_cleanup_ringbuffer(dev);
 	mutex_unlock(&dev->struct_mutex);
 	i915_gem_cleanup_aliasing_ppgtt(dev);
+cleanup_irq:
+	drm_irq_uninstall(dev);
 cleanup_gem_stolen:
 	i915_gem_cleanup_stolen(dev);
 cleanup_vga_switcheroo:
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index bb0eb0f8f6b3..e7411f363b3d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -673,6 +673,7 @@ typedef struct drm_i915_private {
 
 	u32 hotplug_supported_mask;
 	struct work_struct hotplug_work;
+	bool enable_hotplug_processing;
 
 	int num_pipe;
 	int num_pch_pll;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 568820bf4587..02a13ab148df 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -287,6 +287,10 @@ static void i915_hotplug_work_func(struct work_struct *work)
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct intel_encoder *encoder;
 
+	/* HPD irq before everything is fully set up. */
+	if (!dev_priv->enable_hotplug_processing)
+		return;
+
 	mutex_lock(&mode_config->mutex);
 	DRM_DEBUG_KMS("running encoder hotplug functions\n");
 
-- 
cgit v1.2.3


From 61168c53f5be309332006dbd967aaac501cde8b2 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Sat, 1 Dec 2012 13:53:43 +0100
Subject: drm/i915: extract gmbus_wait_hw_status

The gmbus interrupt generation is rather fiddly: We can only ever
enable one interrupt source (but we always want to check for NAK
in addition to the real bit). And the bits in the gmbus status
register don't map at all to the bis in the irq register.

To prepare for this mess, start by extracting the hw status wait
loop into it's own function, consolidate the NAK error handling a
bit. To keep things flexible, pass in the status bit we care about
(in addition to any NAK signalling).

v2: I've failed to notice that the sense of GMBUS_ACTIVE is inverted,
Chris Wilson gladly pointed that out for me. To keep things simple,
ignore that case for  now (we only need to idle the gmbus controller
at the end of an entire i2c transaction, not after every message).

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_i2c.c | 46 ++++++++++++++++++++++------------------
 1 file changed, 25 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 3ef5af15b812..a16eecdf1ed1 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -202,6 +202,24 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin)
 	algo->data = bus;
 }
 
+static int
+gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
+		     u32 gmbus2_status)
+{
+	int ret;
+	int reg_offset = dev_priv->gpio_mmio_base;
+	u32 gmbus2;
+
+	ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
+		       (GMBUS_SATOER | gmbus2_status),
+		       50);
+
+	if (gmbus2 & GMBUS_SATOER)
+		return -ENXIO;
+
+	return ret;
+}
+
 static int
 gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
 		u32 gmbus1_index)
@@ -219,15 +237,10 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
 	while (len) {
 		int ret;
 		u32 val, loop = 0;
-		u32 gmbus2;
 
-		ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
-			       (GMBUS_SATOER | GMBUS_HW_RDY),
-			       50);
+		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_RDY);
 		if (ret)
-			return -ETIMEDOUT;
-		if (gmbus2 & GMBUS_SATOER)
-			return -ENXIO;
+			return ret;
 
 		val = I915_READ(GMBUS3 + reg_offset);
 		do {
@@ -261,7 +274,6 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
 		   GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
 	while (len) {
 		int ret;
-		u32 gmbus2;
 
 		val = loop = 0;
 		do {
@@ -270,13 +282,9 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
 
 		I915_WRITE(GMBUS3 + reg_offset, val);
 
-		ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
-			       (GMBUS_SATOER | GMBUS_HW_RDY),
-			       50);
+		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_RDY);
 		if (ret)
-			return -ETIMEDOUT;
-		if (gmbus2 & GMBUS_SATOER)
-			return -ENXIO;
+			return ret;
 	}
 	return 0;
 }
@@ -345,8 +353,6 @@ gmbus_xfer(struct i2c_adapter *adapter,
 	I915_WRITE(GMBUS0 + reg_offset, bus->reg0);
 
 	for (i = 0; i < num; i++) {
-		u32 gmbus2;
-
 		if (gmbus_is_index_read(msgs, i, num)) {
 			ret = gmbus_xfer_index_read(dev_priv, &msgs[i]);
 			i += 1;  /* set i to the index of the read xfer */
@@ -361,13 +367,11 @@ gmbus_xfer(struct i2c_adapter *adapter,
 		if (ret == -ENXIO)
 			goto clear_err;
 
-		ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
-			       (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE),
-			       50);
+		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_WAIT_PHASE);
+		if (ret == -ENXIO)
+			goto clear_err;
 		if (ret)
 			goto timeout;
-		if (gmbus2 & GMBUS_SATOER)
-			goto clear_err;
 	}
 
 	/* Generate a STOP condition on the bus. Note that gmbus can't generata
-- 
cgit v1.2.3


From 515ac2bb95f609bc4a0d2ad5f7011b3264b2bb21 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Sat, 1 Dec 2012 13:53:44 +0100
Subject: drm/i915: wire up gmbus irq handler

Only enables the interrupt and puts a irq handler into place, doesn't
do anything yet.

Unfortunately there's no gmbus interrupt support for gen2/3 (safe for
pnv, but there the irq is marked as "Test mode").

v2: Wire up the irq handler for vlv and gen4 properly.

v3: i915_enable_pipestat expects the mask bit, not the status bits ... and
for added hilarity those are rather inconsistently named.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_irq.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 02a13ab148df..956b95f1f113 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -525,6 +525,11 @@ static void gen6_queue_rps_work(struct drm_i915_private *dev_priv,
 	queue_work(dev_priv->wq, &dev_priv->rps.work);
 }
 
+static void gmbus_irq_handler(struct drm_device *dev)
+{
+	DRM_DEBUG_DRIVER("GMBUS interrupt\n");
+}
+
 static irqreturn_t valleyview_irq_handler(int irq, void *arg)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
@@ -590,6 +595,9 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)
 			I915_READ(PORT_HOTPLUG_STAT);
 		}
 
+		if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
+			gmbus_irq_handler(dev);
+
 		if (pm_iir & GEN6_PM_DEFERRED_EVENTS)
 			gen6_queue_rps_work(dev_priv, pm_iir);
 
@@ -616,7 +624,7 @@ static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
 				 SDE_AUDIO_POWER_SHIFT);
 
 	if (pch_iir & SDE_GMBUS)
-		DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n");
+		gmbus_irq_handler(dev);
 
 	if (pch_iir & SDE_AUDIO_HDCP_MASK)
 		DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n");
@@ -662,7 +670,7 @@ static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
 		DRM_DEBUG_DRIVER("AUX channel interrupt\n");
 
 	if (pch_iir & SDE_GMBUS_CPT)
-		DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n");
+		gmbus_irq_handler(dev);
 
 	if (pch_iir & SDE_AUDIO_CP_REQ_CPT)
 		DRM_DEBUG_DRIVER("Audio CP request interrupt\n");
@@ -1880,12 +1888,14 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 		hotplug_mask = (SDE_CRT_HOTPLUG_CPT |
 				SDE_PORTB_HOTPLUG_CPT |
 				SDE_PORTC_HOTPLUG_CPT |
-				SDE_PORTD_HOTPLUG_CPT);
+				SDE_PORTD_HOTPLUG_CPT |
+				SDE_GMBUS_CPT);
 	} else {
 		hotplug_mask = (SDE_CRT_HOTPLUG |
 				SDE_PORTB_HOTPLUG |
 				SDE_PORTC_HOTPLUG |
 				SDE_PORTD_HOTPLUG |
+				SDE_GMBUS |
 				SDE_AUX_MASK);
 	}
 
@@ -1945,7 +1955,8 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
 	hotplug_mask = (SDE_CRT_HOTPLUG_CPT |
 			SDE_PORTB_HOTPLUG_CPT |
 			SDE_PORTC_HOTPLUG_CPT |
-			SDE_PORTD_HOTPLUG_CPT);
+			SDE_PORTD_HOTPLUG_CPT |
+			SDE_GMBUS_CPT);
 	dev_priv->pch_irq_mask = ~hotplug_mask;
 
 	I915_WRITE(SDEIIR, I915_READ(SDEIIR));
@@ -1999,6 +2010,7 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
 	POSTING_READ(VLV_IER);
 
 	i915_enable_pipestat(dev_priv, 0, pipestat_enable);
+	i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE);
 	i915_enable_pipestat(dev_priv, 1, pipestat_enable);
 
 	I915_WRITE(VLV_IIR, 0xffffffff);
@@ -2483,6 +2495,7 @@ static int i965_irq_postinstall(struct drm_device *dev)
 
 	dev_priv->pipestat[0] = 0;
 	dev_priv->pipestat[1] = 0;
+	i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE);
 
 	/*
 	 * Enable some error detection, note the instruction error mask
@@ -2636,6 +2649,9 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
 		if (blc_event || (iir & I915_ASLE_INTERRUPT))
 			intel_opregion_asle_intr(dev);
 
+		if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
+			gmbus_irq_handler(dev);
+
 		/* With MSI, interrupts are only generated when iir
 		 * transitions from zero to nonzero.  If another bit got
 		 * set while we were handling the existing iir bits, then
-- 
cgit v1.2.3


From 28c70f162a315bdcfbe0bf940a740ef8bfb918d6 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Sat, 1 Dec 2012 13:53:45 +0100
Subject: drm/i915: use the gmbus irq for waits

We need two special things to properly wire this up:
- Add another argument to gmbus_wait_hw_status to pass in the
  correct interrupt bit in gmbus4.
- Since we can only get an irq for one of the two events we want,
  hand-roll the wait_event_timeout code so that we wake up every
  jiffie and can check for NAKs. This way we also subsume gmbus
  support for platforms without interrupts (or where those are not
  yet enabled).

The important bit really is to only enable one gmbus interrupt source
at the same time - with that piece of lore figured out, this seems to
work flawlessly.

Ben Widawsky rightfully complained the lack of measurements for the
claimed benefits (especially since the first version was actually
broken and fell back to bit-banging). Previously reading the 256 byte
hdmi EDID takes about 72 ms here. With this patch it's down to 33 ms.
Given that transfering the 256 bytes over i2c at wire speed takes
20.5ms alone, the reduction in additional overhead is rather nice.

v2: Chris Wilson wondered whether GMBUS4 might contain some set bits
when booting up an hence result in some spurious interrupts. Since we
clear GMBUS4 after every wait and we do gmbus transfer really early in
the setup sequence to detect displays the window is small, but still
be paranoid and clear it properly.

v3: Clarify the comment that gmbus irq generation can only support one
kind of event, why it bothers us and how we work around that limit.

Cc: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h  |  3 +++
 drivers/gpu/drm/i915/i915_irq.c  |  4 ++++
 drivers/gpu/drm/i915/intel_i2c.c | 45 ++++++++++++++++++++++++++++++----------
 3 files changed, 41 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e7411f363b3d..3843383e13cc 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -641,6 +641,7 @@ typedef struct drm_i915_private {
 
 	struct intel_gmbus gmbus[GMBUS_NUM_PORTS];
 
+
 	/** gmbus_mutex protects against concurrent usage of the single hw gmbus
 	 * controller on different i2c buses. */
 	struct mutex gmbus_mutex;
@@ -650,6 +651,8 @@ typedef struct drm_i915_private {
 	 */
 	uint32_t gpio_mmio_base;
 
+	wait_queue_head_t gmbus_wait_queue;
+
 	struct pci_dev *bridge_dev;
 	struct intel_ring_buffer ring[I915_NUM_RINGS];
 	uint32_t next_seqno;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 956b95f1f113..917a48de08fa 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -527,7 +527,11 @@ static void gen6_queue_rps_work(struct drm_i915_private *dev_priv,
 
 static void gmbus_irq_handler(struct drm_device *dev)
 {
+	struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
+
 	DRM_DEBUG_DRIVER("GMBUS interrupt\n");
+
+	wake_up_all(&dev_priv->gmbus_wait_queue);
 }
 
 static irqreturn_t valleyview_irq_handler(int irq, void *arg)
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index a16eecdf1ed1..8b7189253cb4 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -63,6 +63,7 @@ intel_i2c_reset(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	I915_WRITE(dev_priv->gpio_mmio_base + GMBUS0, 0);
+	I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0);
 }
 
 static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable)
@@ -204,20 +205,38 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin)
 
 static int
 gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
-		     u32 gmbus2_status)
+		     u32 gmbus2_status,
+		     u32 gmbus4_irq_en)
 {
-	int ret;
+	int i;
 	int reg_offset = dev_priv->gpio_mmio_base;
-	u32 gmbus2;
+	u32 gmbus2 = 0;
+	DEFINE_WAIT(wait);
+
+	/* Important: The hw handles only the first bit, so set only one! Since
+	 * we also need to check for NAKs besides the hw ready/idle signal, we
+	 * need to wake up periodically and check that ourselves. */
+	I915_WRITE(GMBUS4 + reg_offset, gmbus4_irq_en);
 
-	ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
-		       (GMBUS_SATOER | gmbus2_status),
-		       50);
+	for (i = 0; i < msecs_to_jiffies(50) + 1; i++) {
+		prepare_to_wait(&dev_priv->gmbus_wait_queue, &wait,
+				TASK_UNINTERRUPTIBLE);
+
+		gmbus2 = I915_READ(GMBUS2 + reg_offset);
+		if (gmbus2 & (GMBUS_SATOER | gmbus2_status))
+			break;
+
+		schedule_timeout(1);
+	}
+	finish_wait(&dev_priv->gmbus_wait_queue, &wait);
+
+	I915_WRITE(GMBUS4 + reg_offset, 0);
 
 	if (gmbus2 & GMBUS_SATOER)
 		return -ENXIO;
-
-	return ret;
+	if (gmbus2 & gmbus2_status)
+		return 0;
+	return -ETIMEDOUT;
 }
 
 static int
@@ -238,7 +257,8 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
 		int ret;
 		u32 val, loop = 0;
 
-		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_RDY);
+		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_RDY,
+					   GMBUS_HW_RDY_EN);
 		if (ret)
 			return ret;
 
@@ -282,7 +302,8 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
 
 		I915_WRITE(GMBUS3 + reg_offset, val);
 
-		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_RDY);
+		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_RDY,
+					   GMBUS_HW_RDY_EN);
 		if (ret)
 			return ret;
 	}
@@ -367,7 +388,8 @@ gmbus_xfer(struct i2c_adapter *adapter,
 		if (ret == -ENXIO)
 			goto clear_err;
 
-		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_WAIT_PHASE);
+		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_WAIT_PHASE,
+					   GMBUS_HW_WAIT_EN);
 		if (ret == -ENXIO)
 			goto clear_err;
 		if (ret)
@@ -473,6 +495,7 @@ int intel_setup_gmbus(struct drm_device *dev)
 		dev_priv->gpio_mmio_base = 0;
 
 	mutex_init(&dev_priv->gmbus_mutex);
+	init_waitqueue_head(&dev_priv->gmbus_wait_queue);
 
 	for (i = 0; i < GMBUS_NUM_PORTS; i++) {
 		struct intel_gmbus *bus = &dev_priv->gmbus[i];
-- 
cgit v1.2.3


From 2c438c0273b76d6cb158f8bdd0aa3ebf66e48a28 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Sat, 1 Dec 2012 13:53:46 +0100
Subject: drm/i915: use gmbus irq to wait for gmbus idle

GMBUS_ACTIVE has inverted sense and so doesn't fit into the
wait_hw_status helper, hence create a new gmbus_wait_idle functions.
Also, we only care about the idle irq event and nothing else, which
allows us to use the wait_event_timeout helper directly without
jumping through hoops to catch NAKs.

Since gen2/3 don't have gmbus interrupts, handle them separately with
the old wait_for macro.

This shaves another few ms off reading EDID from a hdmi screen on my
testbox here. EDID reading with interrupt driven gmbus is now as fast
as with busy-looping gmbus at 28 ms here (with negligible cpu
overhead).

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_i2c.c | 32 ++++++++++++++++++++++++++++----
 1 file changed, 28 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 8b7189253cb4..1fc31191b910 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -203,6 +203,7 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin)
 	algo->data = bus;
 }
 
+#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 4)
 static int
 gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
 		     u32 gmbus2_status,
@@ -239,6 +240,31 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
 	return -ETIMEDOUT;
 }
 
+static int
+gmbus_wait_idle(struct drm_i915_private *dev_priv)
+{
+	int ret;
+	int reg_offset = dev_priv->gpio_mmio_base;
+
+#define C ((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0)
+
+	if (!HAS_GMBUS_IRQ(dev_priv->dev))
+		return wait_for(C, 10);
+
+	/* Important: The hw handles only the first bit, so set only one! */
+	I915_WRITE(GMBUS4 + reg_offset, GMBUS_IDLE_EN);
+
+	ret = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10);
+
+	I915_WRITE(GMBUS4 + reg_offset, 0);
+
+	if (ret)
+		return 0;
+	else
+		return -ETIMEDOUT;
+#undef C
+}
+
 static int
 gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
 		u32 gmbus1_index)
@@ -406,8 +432,7 @@ gmbus_xfer(struct i2c_adapter *adapter,
 	 * We will re-enable it at the start of the next xfer,
 	 * till then let it sleep.
 	 */
-	if (wait_for((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0,
-		     10)) {
+	if (gmbus_wait_idle(dev_priv)) {
 		DRM_DEBUG_KMS("GMBUS [%s] timed out waiting for idle\n",
 			 adapter->name);
 		ret = -ETIMEDOUT;
@@ -431,8 +456,7 @@ clear_err:
 	 * it's slow responding and only answers on the 2nd retry.
 	 */
 	ret = -ENXIO;
-	if (wait_for((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0,
-		     10)) {
+	if (gmbus_wait_idle(dev_priv)) {
 		DRM_DEBUG_KMS("GMBUS [%s] timed out after NAK\n",
 			      adapter->name);
 		ret = -ETIMEDOUT;
-- 
cgit v1.2.3


From ce99c2569dfcec9662993961db7f433e160c50f3 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Sat, 1 Dec 2012 13:53:47 +0100
Subject: drm/i915: wire up do aux channel done interrupt

Doesn't do anything yet than call dp_aux_irq_handler.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_irq.c | 28 +++++++++++++++++++++++-----
 1 file changed, 23 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 917a48de08fa..1e245e501e5a 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -534,6 +534,11 @@ static void gmbus_irq_handler(struct drm_device *dev)
 	wake_up_all(&dev_priv->gmbus_wait_queue);
 }
 
+static void dp_aux_irq_handler(struct drm_device *dev)
+{
+	DRM_DEBUG_DRIVER("AUX channel interrupt\n");
+}
+
 static irqreturn_t valleyview_irq_handler(int irq, void *arg)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
@@ -627,6 +632,9 @@ static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
 				 (pch_iir & SDE_AUDIO_POWER_MASK) >>
 				 SDE_AUDIO_POWER_SHIFT);
 
+	if (pch_iir & SDE_AUX_MASK)
+		dp_aux_irq_handler(dev);
+
 	if (pch_iir & SDE_GMBUS)
 		gmbus_irq_handler(dev);
 
@@ -671,7 +679,7 @@ static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
 				 SDE_AUDIO_POWER_SHIFT_CPT);
 
 	if (pch_iir & SDE_AUX_MASK_CPT)
-		DRM_DEBUG_DRIVER("AUX channel interrupt\n");
+		dp_aux_irq_handler(dev);
 
 	if (pch_iir & SDE_GMBUS_CPT)
 		gmbus_irq_handler(dev);
@@ -712,6 +720,9 @@ static irqreturn_t ivybridge_irq_handler(int irq, void *arg)
 
 	de_iir = I915_READ(DEIIR);
 	if (de_iir) {
+		if (de_iir & DE_AUX_CHANNEL_A_IVB)
+			dp_aux_irq_handler(dev);
+
 		if (de_iir & DE_GSE_IVB)
 			intel_opregion_gse_intr(dev);
 
@@ -790,6 +801,9 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg)
 	else
 		snb_gt_irq_handler(dev, dev_priv, gt_iir);
 
+	if (de_iir & DE_AUX_CHANNEL_A)
+		dp_aux_irq_handler(dev);
+
 	if (de_iir & DE_GSE)
 		intel_opregion_gse_intr(dev);
 
@@ -1858,7 +1872,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	/* enable kind of interrupts always enabled */
 	u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
-			   DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
+			   DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE |
+			   DE_AUX_CHANNEL_A;
 	u32 render_irqs;
 	u32 hotplug_mask;
 
@@ -1893,7 +1908,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 				SDE_PORTB_HOTPLUG_CPT |
 				SDE_PORTC_HOTPLUG_CPT |
 				SDE_PORTD_HOTPLUG_CPT |
-				SDE_GMBUS_CPT);
+				SDE_GMBUS_CPT |
+				SDE_AUX_MASK_CPT);
 	} else {
 		hotplug_mask = (SDE_CRT_HOTPLUG |
 				SDE_PORTB_HOTPLUG |
@@ -1930,7 +1946,8 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
 		DE_MASTER_IRQ_CONTROL | DE_GSE_IVB | DE_PCH_EVENT_IVB |
 		DE_PLANEC_FLIP_DONE_IVB |
 		DE_PLANEB_FLIP_DONE_IVB |
-		DE_PLANEA_FLIP_DONE_IVB;
+		DE_PLANEA_FLIP_DONE_IVB |
+		DE_AUX_CHANNEL_A_IVB;
 	u32 render_irqs;
 	u32 hotplug_mask;
 
@@ -1960,7 +1977,8 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
 			SDE_PORTB_HOTPLUG_CPT |
 			SDE_PORTC_HOTPLUG_CPT |
 			SDE_PORTD_HOTPLUG_CPT |
-			SDE_GMBUS_CPT);
+			SDE_GMBUS_CPT |
+			SDE_AUX_MASK_CPT);
 	dev_priv->pch_irq_mask = ~hotplug_mask;
 
 	I915_WRITE(SDEIIR, I915_READ(SDEIIR));
-- 
cgit v1.2.3


From 9ee32fea5fe810ec06af3a15e4c65478de56d4f5 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Sat, 1 Dec 2012 13:53:48 +0100
Subject: drm/i915: irq-drive the dp aux communication

At least on the platforms that have a dp aux irq and also have it
enabled - vlvhsw should have one, too. But I don't have a machine to
test this on. Judging from docs there's no dp aux interrupt for gm45.

Also, I only have an ivb cpu edp machine, so the dp aux A code for
snb/ilk is untested.

For dpcd probing when nothing is connected it slashes about 5ms of cpu
time (cpu time is now negligible), which agrees with 3 * 5 400 usec
timeouts.

A previous version of this patch increases the time required to go
through the dp_detect cycle (which includes reading the edid) from
around 33 ms to around 40 ms. Experiments indicated that this is
purely due to the irq latency - the hw doesn't allow us to queue up
dp aux transactions and hence irq latency directly affects throughput.
gmbus is much better, there we have a 8 byte buffer, and we get the
irq once another 4 bytes can be queued up.

But by using the pm_qos interface to request the lowest possible cpu
wake-up latency this slowdown completely disappeared.

Since all our output detection logic is single-threaded with the
mode_config mutex right now anyway, I've decide not ot play fancy and
to just reuse the gmbus wait queue. But this would definitely prep the
way to run dp detection on different ports in parallel

v2: Add a timeout for dp aux transfers when using interrupts - the hw
_does_  prevent this with the hw-based 400 usec timeout, but if the
irq somehow doesn't arrive we're screwed. Lesson learned while
developing this ;-)

v3: While at it also convert the busy-loop to wait_for_atomic, so that
we don't run the risk of an infinite loop any more.

v4: Ensure we have the smallest possible irq latency by using the
pm_qos interface.

v5: Add a comment to the code to explain why we frob pm_qos. Suggested
by Chris Wilson.

v6: Disable dp irq for vlv, that's easier than trying to get at docs
and hw.

v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the
dp aux registers aren't at a fixed offset any more, but can be on the
PCH while the DP port is on the cpu die.

Reviewed-by: Imre Deak <imre.deak@intel.com> (v6)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_dma.c |  1 +
 drivers/gpu/drm/i915/i915_drv.h |  4 +++
 drivers/gpu/drm/i915/i915_irq.c |  6 ++++
 drivers/gpu/drm/i915/intel_dp.c | 79 ++++++++++++++++++++++++++++++++++-------
 4 files changed, 77 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 14d679ab52b7..93630669c6dc 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1737,6 +1737,7 @@ int i915_driver_unload(struct drm_device *dev)
 	intel_teardown_mchbar(dev);
 
 	destroy_workqueue(dev_priv->wq);
+	pm_qos_remove_request(&dev_priv->pm_qos);
 
 	if (dev_priv->slab)
 		kmem_cache_destroy(dev_priv->slab);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 3843383e13cc..a00ee3da632f 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -40,6 +40,7 @@
 #include <linux/backlight.h>
 #include <linux/intel-iommu.h>
 #include <linux/kref.h>
+#include <linux/pm_qos.h>
 
 /* General customization:
  */
@@ -665,6 +666,9 @@ typedef struct drm_i915_private {
 	/* protects the irq masks */
 	spinlock_t irq_lock;
 
+	/* To control wakeup latency, e.g. for irq-driven dp aux transfers. */
+	struct pm_qos_request pm_qos;
+
 	/* DPIO indirect register protection */
 	spinlock_t dpio_lock;
 
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 1e245e501e5a..58bb11b58796 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -536,7 +536,11 @@ static void gmbus_irq_handler(struct drm_device *dev)
 
 static void dp_aux_irq_handler(struct drm_device *dev)
 {
+	struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
+
 	DRM_DEBUG_DRIVER("AUX channel interrupt\n");
+
+	wake_up_all(&dev_priv->gmbus_wait_queue);
 }
 
 static irqreturn_t valleyview_irq_handler(int irq, void *arg)
@@ -2732,6 +2736,8 @@ void intel_irq_init(struct drm_device *dev)
 	setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
 		    (unsigned long) dev);
 
+	pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY, 0);
+
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
 	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
 	if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index b51043e651b5..ada1b316195c 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -322,6 +322,48 @@ intel_dp_check_edp(struct intel_dp *intel_dp)
 	}
 }
 
+static uint32_t
+intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t ch_ctl = intel_dp->output_reg + 0x10;
+	uint32_t status;
+	bool done;
+
+	if (IS_HASWELL(dev)) {
+		switch (intel_dig_port->port) {
+		case PORT_A:
+			ch_ctl = DPA_AUX_CH_CTL;
+			break;
+		case PORT_B:
+			ch_ctl = PCH_DPB_AUX_CH_CTL;
+			break;
+		case PORT_C:
+			ch_ctl = PCH_DPC_AUX_CH_CTL;
+			break;
+		case PORT_D:
+			ch_ctl = PCH_DPD_AUX_CH_CTL;
+			break;
+		default:
+			BUG();
+		}
+	}
+
+#define C (((status = I915_READ(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+	if (has_aux_irq)
+		done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10);
+	else
+		done = wait_for_atomic(C, 10) == 0;
+	if (!done)
+		DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
+			  has_aux_irq);
+#undef C
+
+	return status;
+}
+
 static int
 intel_dp_aux_ch(struct intel_dp *intel_dp,
 		uint8_t *send, int send_bytes,
@@ -333,11 +375,17 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t ch_ctl = output_reg + 0x10;
 	uint32_t ch_data = ch_ctl + 4;
-	int i;
-	int recv_bytes;
+	int i, ret, recv_bytes;
 	uint32_t status;
 	uint32_t aux_clock_divider;
 	int try, precharge;
+	bool has_aux_irq = INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev);
+
+	/* dp aux is extremely sensitive to irq latency, hence request the
+	 * lowest possible wakeup latency and so prevent the cpu from going into
+	 * deep sleep states.
+	 */
+	pm_qos_update_request(&dev_priv->pm_qos, 0);
 
 	if (IS_HASWELL(dev)) {
 		switch (intel_dig_port->port) {
@@ -400,7 +448,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 	if (try == 3) {
 		WARN(1, "dp_aux_ch not started status 0x%08x\n",
 		     I915_READ(ch_ctl));
-		return -EBUSY;
+		ret = -EBUSY;
+		goto out;
 	}
 
 	/* Must try at least 3 times according to DP spec */
@@ -413,6 +462,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 		/* Send the command and wait for it to complete */
 		I915_WRITE(ch_ctl,
 			   DP_AUX_CH_CTL_SEND_BUSY |
+			   (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
 			   DP_AUX_CH_CTL_TIME_OUT_400us |
 			   (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
 			   (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
@@ -420,12 +470,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 			   DP_AUX_CH_CTL_DONE |
 			   DP_AUX_CH_CTL_TIME_OUT_ERROR |
 			   DP_AUX_CH_CTL_RECEIVE_ERROR);
-		for (;;) {
-			status = I915_READ(ch_ctl);
-			if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
-				break;
-			udelay(100);
-		}
+
+		status = intel_dp_aux_wait_done(intel_dp, has_aux_irq);
 
 		/* Clear done status and any errors */
 		I915_WRITE(ch_ctl,
@@ -443,7 +489,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 
 	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
 		DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
-		return -EBUSY;
+		ret = -EBUSY;
+		goto out;
 	}
 
 	/* Check for timeout or receive error.
@@ -451,14 +498,16 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 	 */
 	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
 		DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
-		return -EIO;
+		ret = -EIO;
+		goto out;
 	}
 
 	/* Timeouts occur when the device isn't connected, so they're
 	 * "normal" -- don't fill the kernel log with these */
 	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
 		DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
-		return -ETIMEDOUT;
+		ret = -ETIMEDOUT;
+		goto out;
 	}
 
 	/* Unload any bytes sent back from the other side */
@@ -471,7 +520,11 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 		unpack_aux(I915_READ(ch_data + i),
 			   recv + i, recv_bytes - i);
 
-	return recv_bytes;
+	ret = recv_bytes;
+out:
+	pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE);
+
+	return ret;
 }
 
 /* Write data to the aux channel in native mode */
-- 
cgit v1.2.3


From ef04f00d12312e43b13ba8f79435763e25aaff5c Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Sat, 1 Dec 2012 21:03:59 +0100
Subject: drm/i915: use _NOTRACE for gmbus/dp aux wait loops

Less clutter in the traces. And in both cases we yell rather loud
into the logs if we time out. Patch suggested by Chris Wilson.

v2: Annotate another I915_READ in dp_aux to be consistent - we filter
out all register io in wait_for and similar loops. Chris also
suggested to mark all dp_aux register access as _NOTRACE, but I think
we should keep all functionally relevant access around, and filter
unneeded bits in userspace after the trace is captured.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c  | 4 ++--
 drivers/gpu/drm/i915/intel_i2c.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index ada1b316195c..3f633cadc8ba 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -351,7 +351,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
 		}
 	}
 
-#define C (((status = I915_READ(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+#define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
 	if (has_aux_irq)
 		done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10);
 	else
@@ -439,7 +439,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 
 	/* Try to wait for any previous AUX channel activity */
 	for (try = 0; try < 3; try++) {
-		status = I915_READ(ch_ctl);
+		status = I915_READ_NOTRACE(ch_ctl);
 		if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
 			break;
 		msleep(1);
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 1fc31191b910..7f0904170963 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -223,7 +223,7 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
 		prepare_to_wait(&dev_priv->gmbus_wait_queue, &wait,
 				TASK_UNINTERRUPTIBLE);
 
-		gmbus2 = I915_READ(GMBUS2 + reg_offset);
+		gmbus2 = I915_READ_NOTRACE(GMBUS2 + reg_offset);
 		if (gmbus2 & (GMBUS_SATOER | gmbus2_status))
 			break;
 
@@ -246,7 +246,7 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv)
 	int ret;
 	int reg_offset = dev_priv->gpio_mmio_base;
 
-#define C ((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0)
+#define C ((I915_READ_NOTRACE(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0)
 
 	if (!HAS_GMBUS_IRQ(dev_priv->dev))
 		return wait_for(C, 10);
-- 
cgit v1.2.3


From 6ef6a450b9a4c8851d63e58aa62ee6a34c01c156 Mon Sep 17 00:00:00 2001
From: Dexuan Cui
Date: Wed, 5 Dec 2012 22:37:17 +0800
Subject: drm/i915: Remove duplicate and unused register #defines in i915_reg.h

TRANS_DP_VIDEO_AUDIO is not used at all.
The other 3 has duplicated #defines.

Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_reg.h | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 462b50a3d88e..f2a5ea694684 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1875,8 +1875,6 @@
 #define   PFIT_SCALING_PILLAR	(2 << 26)
 #define   PFIT_SCALING_LETTER	(3 << 26)
 #define PFIT_PGM_RATIOS	0x61234
-#define   PFIT_VERT_SCALE_MASK			0xfff00000
-#define   PFIT_HORIZ_SCALE_MASK			0x0000fff0
 /* Pre-965 */
 #define		PFIT_VERT_SCALE_SHIFT		20
 #define		PFIT_VERT_SCALE_MASK		0xfff00000
@@ -3799,8 +3797,6 @@
 #define  TRANS_FSYNC_DELAY_HB2  (1<<27)
 #define  TRANS_FSYNC_DELAY_HB3  (2<<27)
 #define  TRANS_FSYNC_DELAY_HB4  (3<<27)
-#define  TRANS_DP_AUDIO_ONLY    (1<<26)
-#define  TRANS_DP_VIDEO_AUDIO   (0<<26)
 #define  TRANS_INTERLACE_MASK   (7<<21)
 #define  TRANS_PROGRESSIVE      (0<<21)
 #define  TRANS_INTERLACED       (3<<21)
-- 
cgit v1.2.3


From 36dacf5b8b3c0bab7010943c34d2dbcc09a0d6f3 Mon Sep 17 00:00:00 2001
From: Paulo Zanoni
Date: Thu, 6 Dec 2012 09:44:52 -0200
Subject: drm/i915: be less verbose when handling gmbus/aux irqs

Having 9500 lines repeated on dmesg does not help me at all.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_irq.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 58bb11b58796..2e1d80de6ccc 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -529,8 +529,6 @@ static void gmbus_irq_handler(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
 
-	DRM_DEBUG_DRIVER("GMBUS interrupt\n");
-
 	wake_up_all(&dev_priv->gmbus_wait_queue);
 }
 
@@ -538,8 +536,6 @@ static void dp_aux_irq_handler(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
 
-	DRM_DEBUG_DRIVER("AUX channel interrupt\n");
-
 	wake_up_all(&dev_priv->gmbus_wait_queue);
 }
 
-- 
cgit v1.2.3


From ed7ef43989b3a8235b1cbf1e2b025aa4af3368a6 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Thu, 6 Dec 2012 14:24:21 +0100
Subject: drm/i915: rip out pre-DDI stuff from haswell_crtc_mode_set

Especially getting rid of all things lvds is ... great!

v2: Drop the two additional pre-hsw hunks noticed by Paulo Zanoni.

v3:
- handle DP ports correctly (spoted by Paulo)
- don't leave {} behind for a single-line block (again spotted by
  Paulo)
- kill another if (IBX || CPT) block

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 128 +----------------------------------
 1 file changed, 2 insertions(+), 126 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 093a163d4b1c..5865cd9ddc3a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5461,20 +5461,13 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
 	int num_connectors = 0;
-	intel_clock_t clock, reduced_clock;
-	u32 dpll = 0, fp = 0, fp2 = 0;
-	bool ok, has_reduced_clock = false;
-	bool is_lvds = false, is_dp = false, is_cpu_edp = false;
+	bool is_dp = false, is_cpu_edp = false;
 	struct intel_encoder *encoder;
-	u32 temp;
 	int ret;
 	bool dither;
 
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
 		switch (encoder->type) {
-		case INTEL_OUTPUT_LVDS:
-			is_lvds = true;
-			break;
 		case INTEL_OUTPUT_DISPLAYPORT:
 			is_dp = true;
 			break;
@@ -5508,143 +5501,26 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	if (!intel_ddi_pll_mode_set(crtc, adjusted_mode->clock))
 		return -EINVAL;
 
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-		ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
-					     &has_reduced_clock,
-					     &reduced_clock);
-		if (!ok) {
-			DRM_ERROR("Couldn't find PLL settings for mode!\n");
-			return -EINVAL;
-		}
-	}
-
 	/* Ensure that the cursor is valid for the new mode before changing... */
 	intel_crtc_update_cursor(crtc, true);
 
 	/* determine panel color depth */
 	dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp,
 					      adjusted_mode);
-	if (is_lvds && dev_priv->lvds_dither)
-		dither = true;
 
 	DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
 	drm_mode_debug_printmodeline(mode);
 
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-		fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
-		if (has_reduced_clock)
-			fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
-			      reduced_clock.m2;
-
-		dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock,
-					     fp);
-
-		/* CPU eDP is the only output that doesn't need a PCH PLL of its
-		 * own on pre-Haswell/LPT generation */
-		if (!is_cpu_edp) {
-			struct intel_pch_pll *pll;
-
-			pll = intel_get_pch_pll(intel_crtc, dpll, fp);
-			if (pll == NULL) {
-				DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
-						 pipe);
-				return -EINVAL;
-			}
-		} else
-			intel_put_pch_pll(intel_crtc);
-
-		/* The LVDS pin pair needs to be on before the DPLLs are
-		 * enabled.  This is an exception to the general rule that
-		 * mode_set doesn't turn things on.
-		 */
-		if (is_lvds) {
-			temp = I915_READ(PCH_LVDS);
-			temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
-			if (HAS_PCH_CPT(dev)) {
-				temp &= ~PORT_TRANS_SEL_MASK;
-				temp |= PORT_TRANS_SEL_CPT(pipe);
-			} else {
-				if (pipe == 1)
-					temp |= LVDS_PIPEB_SELECT;
-				else
-					temp &= ~LVDS_PIPEB_SELECT;
-			}
-
-			/* set the corresponsding LVDS_BORDER bit */
-			temp |= dev_priv->lvds_border_bits;
-			/* Set the B0-B3 data pairs corresponding to whether
-			 * we're going to set the DPLLs for dual-channel mode or
-			 * not.
-			 */
-			if (clock.p2 == 7)
-				temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
-			else
-				temp &= ~(LVDS_B0B3_POWER_UP |
-					  LVDS_CLKB_POWER_UP);
-
-			/* It would be nice to set 24 vs 18-bit mode
-			 * (LVDS_A3_POWER_UP) appropriately here, but we need to
-			 * look more thoroughly into how panels behave in the
-			 * two modes.
-			 */
-			temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
-			if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
-				temp |= LVDS_HSYNC_POLARITY;
-			if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
-				temp |= LVDS_VSYNC_POLARITY;
-			I915_WRITE(PCH_LVDS, temp);
-		}
-	}
-
-	if (is_dp && !is_cpu_edp) {
+	if (is_dp && !is_cpu_edp)
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
-	} else {
-		if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-			/* For non-DP output, clear any trans DP clock recovery
-			 * setting.*/
-			I915_WRITE(TRANSDATA_M1(pipe), 0);
-			I915_WRITE(TRANSDATA_N1(pipe), 0);
-			I915_WRITE(TRANSDPLINK_M1(pipe), 0);
-			I915_WRITE(TRANSDPLINK_N1(pipe), 0);
-		}
-	}
 
 	intel_crtc->lowfreq_avail = false;
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-		if (intel_crtc->pch_pll) {
-			I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
-
-			/* Wait for the clocks to stabilize. */
-			POSTING_READ(intel_crtc->pch_pll->pll_reg);
-			udelay(150);
-
-			/* The pixel multiplier can only be updated once the
-			 * DPLL is enabled and the clocks are stable.
-			 *
-			 * So write it again.
-			 */
-			I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
-		}
-
-		if (intel_crtc->pch_pll) {
-			if (is_lvds && has_reduced_clock && i915_powersave) {
-				I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
-				intel_crtc->lowfreq_avail = true;
-			} else {
-				I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
-			}
-		}
-	}
 
 	intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
 	if (!is_dp || is_cpu_edp)
 		ironlake_set_m_n(crtc, mode, adjusted_mode);
 
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
-		if (is_cpu_edp)
-			ironlake_set_pll_edp(crtc, adjusted_mode->clock);
-
 	haswell_set_pipeconf(crtc, adjusted_mode, dither);
 
 	/* Set up the display plane register */
-- 
cgit v1.2.3


From ea9b6006b51b79cfbb87c1ca81923761b7799c0f Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Thu, 29 Nov 2012 15:59:31 +0100
Subject: drm/i915: move set_pll_edp to intel_dp.c

Now that we enable the cpu edp pll in intel_dp->pre_enable and no
longer in crtc_mode_set, we can also move the modeset part to the
intel_dp->mode_set callback. Previously this was not possible because
the encoder ->mode_set callbacks are called after the crtc mode set
callback.

v2: Rebase on top of copy&pasted hsw crtc_mode_set.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 40 ------------------------------------
 drivers/gpu/drm/i915/intel_dp.c      | 40 ++++++++++++++++++++++++++++++++++++
 2 files changed, 40 insertions(+), 40 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5865cd9ddc3a..f3e58a43886b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2294,43 +2294,6 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	return 0;
 }
 
-static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 dpa_ctl;
-
-	DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
-	dpa_ctl = I915_READ(DP_A);
-	dpa_ctl &= ~DP_PLL_FREQ_MASK;
-
-	if (clock < 200000) {
-		u32 temp;
-		dpa_ctl |= DP_PLL_FREQ_160MHZ;
-		/* workaround for 160Mhz:
-		   1) program 0x4600c bits 15:0 = 0x8124
-		   2) program 0x46010 bit 0 = 1
-		   3) program 0x46034 bit 24 = 1
-		   4) program 0x64000 bit 14 = 1
-		   */
-		temp = I915_READ(0x4600c);
-		temp &= 0xffff0000;
-		I915_WRITE(0x4600c, temp | 0x8124);
-
-		temp = I915_READ(0x46010);
-		I915_WRITE(0x46010, temp | 1);
-
-		temp = I915_READ(0x46034);
-		I915_WRITE(0x46034, temp | (1 << 24));
-	} else {
-		dpa_ctl |= DP_PLL_FREQ_270MHZ;
-	}
-	I915_WRITE(DP_A, dpa_ctl);
-
-	POSTING_READ(DP_A);
-	udelay(500);
-}
-
 static void intel_fdi_normal_train(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -5429,9 +5392,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 
 	fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
 
-	if (is_cpu_edp)
-		ironlake_set_pll_edp(crtc, adjusted_mode->clock);
-
 	ironlake_set_pipeconf(crtc, adjusted_mode, dither);
 
 	intel_wait_for_vblank(dev, pipe);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 3f633cadc8ba..e525f0302d8f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -899,6 +899,43 @@ void intel_dp_init_link_config(struct intel_dp *intel_dp)
 	}
 }
 
+static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dpa_ctl;
+
+	DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
+	dpa_ctl = I915_READ(DP_A);
+	dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+	if (clock < 200000) {
+		u32 temp;
+		dpa_ctl |= DP_PLL_FREQ_160MHZ;
+		/* workaround for 160Mhz:
+		   1) program 0x4600c bits 15:0 = 0x8124
+		   2) program 0x46010 bit 0 = 1
+		   3) program 0x46034 bit 24 = 1
+		   4) program 0x64000 bit 14 = 1
+		   */
+		temp = I915_READ(0x4600c);
+		temp &= 0xffff0000;
+		I915_WRITE(0x4600c, temp | 0x8124);
+
+		temp = I915_READ(0x46010);
+		I915_WRITE(0x46010, temp | 1);
+
+		temp = I915_READ(0x46034);
+		I915_WRITE(0x46034, temp | (1 << 24));
+	} else {
+		dpa_ctl |= DP_PLL_FREQ_270MHZ;
+	}
+	I915_WRITE(DP_A, dpa_ctl);
+
+	POSTING_READ(DP_A);
+	udelay(500);
+}
+
 static void
 intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		  struct drm_display_mode *adjusted_mode)
@@ -998,6 +1035,9 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 	} else {
 		intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
 	}
+
+	if (is_cpu_edp(intel_dp))
+		ironlake_set_pll_edp(crtc, adjusted_mode->clock);
 }
 
 #define IDLE_ON_MASK		(PP_ON | 0 	  | PP_SEQUENCE_MASK | 0                     | PP_SEQUENCE_STATE_MASK)
-- 
cgit v1.2.3


From 1ce17038093f02e708e5816f645bbec63aff8bd2 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Thu, 29 Nov 2012 15:59:32 +0100
Subject: drm/i915: rip out pre-production ilk cpu edp w/a

While reading docs I've noticed that this special workaround to select
the 1.6 GHz DP clock only applies to pre-production ilk machines.
Since the registers we're touching here are rather undocumented and
might be harmful on later chips, rip it out.

For the Bspec reference of this w/a look in "vol4g CPU Display
Registers [DevILK]", Section 4.1.7.1 "DP_A—DisplayPort A
Control Register", "DP_PLL_Frequency_Select".

v2: Keep a debug message as a hint in case something regresses.
Requested by Chris Wilson.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index e525f0302d8f..c01163d22d17 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -910,26 +910,15 @@ static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
 	dpa_ctl &= ~DP_PLL_FREQ_MASK;
 
 	if (clock < 200000) {
-		u32 temp;
+		/* For a long time we've carried around a ILK-DevA w/a for the
+		 * 160MHz clock. If we're really unlucky, it's still required.
+		 */
+		DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n");
 		dpa_ctl |= DP_PLL_FREQ_160MHZ;
-		/* workaround for 160Mhz:
-		   1) program 0x4600c bits 15:0 = 0x8124
-		   2) program 0x46010 bit 0 = 1
-		   3) program 0x46034 bit 24 = 1
-		   4) program 0x64000 bit 14 = 1
-		   */
-		temp = I915_READ(0x4600c);
-		temp &= 0xffff0000;
-		I915_WRITE(0x4600c, temp | 0x8124);
-
-		temp = I915_READ(0x46010);
-		I915_WRITE(0x46010, temp | 1);
-
-		temp = I915_READ(0x46034);
-		I915_WRITE(0x46034, temp | (1 << 24));
 	} else {
 		dpa_ctl |= DP_PLL_FREQ_270MHZ;
 	}
+
 	I915_WRITE(DP_A, dpa_ctl);
 
 	POSTING_READ(DP_A);
-- 
cgit v1.2.3


From ab527efc2feadcab1cad0740be307cb4153b493f Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Thu, 29 Nov 2012 15:59:33 +0100
Subject: drm/i915: use wait_for_vblank instead of msleep(17)

17 ms is eerily close to 60 Hz ^-1

Unfortunately this goes back to the original DP enabling for ilk, and
unfortunately does not come with a reason for it's existance attached.

Some closer inspection of the code and DP specs shows that we set the
idle link pattern before we disable the port. And it seems like that
the DP spec (or at least our hw) only switch to the idle pattern on
the next vblank. Hence a vblank wait at this spot makes _much_ more
sense than a really long wait.

v2: Rebase fixup.

v3: Add comment requested by Paulo Zanoni saying that we don't really
know what this wait is for.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index c01163d22d17..89164c553b2d 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2041,6 +2041,8 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc =
+		to_intel_crtc(intel_dig_port->base.base.crtc);
 	uint32_t DP = intel_dp->DP;
 
 	/*
@@ -2075,7 +2077,8 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 	}
 	POSTING_READ(intel_dp->output_reg);
 
-	msleep(17);
+	/* We don't really know why we're doing this */
+	intel_wait_for_vblank(dev, intel_crtc->pipe);
 
 	if (HAS_PCH_IBX(dev) &&
 	    I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
@@ -2107,7 +2110,7 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 			POSTING_READ(intel_dp->output_reg);
 			msleep(50);
 		} else
-			intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe);
+			intel_wait_for_vblank(dev, intel_crtc->pipe);
 	}
 
 	DP &= ~DP_AUDIO_OUTPUT_ENABLE;
-- 
cgit v1.2.3


From ff50afe9aceb6264a4fbe40459da75170fb9a2a2 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Thu, 29 Nov 2012 15:59:34 +0100
Subject: drm/i915: WARN on !crtc in intel_dp_link_down

This could have happened with the old crtc helper based modeset code,
but can't happen any longer with the new code.

Hence put in a WARN and adjust the comment. If no one hits this, we
can eventually remove it (like a few other such cases across our
code).

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 89164c553b2d..84652ca3b161 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2098,15 +2098,10 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 		/* Changes to enable or select take place the vblank
 		 * after being written.
 		 */
-		if (crtc == NULL) {
-			/* We can arrive here never having been attached
-			 * to a CRTC, for instance, due to inheriting
-			 * random state from the BIOS.
-			 *
-			 * If the pipe is not running, play safe and
-			 * wait for the clocks to stabilise before
-			 * continuing.
-			 */
+		if (WARN_ON(crtc == NULL)) {
+			/* We should never try to disable a port without a crtc
+			 * attached. For paranoia keep the code around for a
+			 * bit. */
 			POSTING_READ(intel_dp->output_reg);
 			msleep(50);
 		} else
-- 
cgit v1.2.3


From 2f0c2ad18b88691496e23d1ddbc2d0af8f6df5fa Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Thu, 29 Nov 2012 15:59:35 +0100
Subject: drm/i915: drop unnecessary clearing of pch dp transcoder timings

This has originally been added in

commit 8db9d77b1b14fd730561f64beea8c00e4478d7c5
Author: Zhenyu Wang <zhenyuw@linux.intel.com>
Date:   Wed Apr 7 16:15:54 2010 +0800

    drm/i915: Support for Cougarpoint PCH display pipeline

probably to combat issues with hw state left behind by the BIOS. And
indeed, I've checked out that specific revision, and there is no DP
support yet. So the pch dp transcoder won't be correctly disabled, and
that's important since it requires a rether special disable dance:
Just writing 0 to TRANS_DP_CTL won't cut it, since we need to select
the NONE port when disabling, too.

And indeed, things seem to still work, so let's just remove this.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f3e58a43886b..953796c84fbd 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5345,15 +5345,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	} else
 		intel_put_pch_pll(intel_crtc);
 
-	if (is_dp && !is_cpu_edp) {
+	if (is_dp && !is_cpu_edp)
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
-	} else {
-		/* For non-DP output, clear any trans DP clock recovery setting.*/
-		I915_WRITE(TRANSDATA_M1(pipe), 0);
-		I915_WRITE(TRANSDATA_N1(pipe), 0);
-		I915_WRITE(TRANSDPLINK_M1(pipe), 0);
-		I915_WRITE(TRANSDPLINK_N1(pipe), 0);
-	}
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		if (encoder->pre_pll_enable)
-- 
cgit v1.2.3


From e69d0bc1c67520c302e070ac078975ea9c786de8 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Thu, 29 Nov 2012 15:59:36 +0100
Subject: drm/i915: extract common link_m_n helpers

Both the dp and fdi code use the exact same computations (ignore minor
differences in conversion between bits and bytes).

This makes it even more apparent that we have a _massive_ mess between
cpu transcoder/fdi link/pch transcoder and pch link settings. And also
that we have hilarious amounts of confusion between edp and dp
(despite that they're identical at a link level).

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h      | 13 ++++++++++++
 drivers/gpu/drm/i915/intel_display.c | 31 +++++++++-------------------
 drivers/gpu/drm/i915/intel_dp.c      | 39 +++---------------------------------
 3 files changed, 26 insertions(+), 57 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index a00ee3da632f..e9ac3603fbdb 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -107,6 +107,19 @@ struct intel_pch_pll {
 };
 #define I915_NUM_PLLS 2
 
+/* Used by dp and fdi links */
+struct intel_link_m_n {
+	uint32_t	tu;
+	uint32_t	gmch_m;
+	uint32_t	gmch_n;
+	uint32_t	link_m;
+	uint32_t	link_n;
+};
+
+void intel_link_compute_m_n(int bpp, int nlanes,
+			    int pixel_clock, int link_clock,
+			    struct intel_link_m_n *m_n);
+
 struct intel_ddi_plls {
 	int spll_refcount;
 	int wrpll1_refcount;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 953796c84fbd..34832bc04931 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3951,16 +3951,8 @@ static int i830_get_display_clock_speed(struct drm_device *dev)
 	return 133000;
 }
 
-struct fdi_m_n {
-	u32        tu;
-	u32        gmch_m;
-	u32        gmch_n;
-	u32        link_m;
-	u32        link_n;
-};
-
 static void
-fdi_reduce_ratio(u32 *num, u32 *den)
+intel_reduce_ratio(uint32_t *num, uint32_t *den)
 {
 	while (*num > 0xffffff || *den > 0xffffff) {
 		*num >>= 1;
@@ -3968,20 +3960,18 @@ fdi_reduce_ratio(u32 *num, u32 *den)
 	}
 }
 
-static void
-ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
-		     int link_clock, struct fdi_m_n *m_n)
+void
+intel_link_compute_m_n(int bits_per_pixel, int nlanes,
+		       int pixel_clock, int link_clock,
+		       struct intel_link_m_n *m_n)
 {
-	m_n->tu = 64; /* default size */
-
-	/* BUG_ON(pixel_clock > INT_MAX / 36); */
+	m_n->tu = 64;
 	m_n->gmch_m = bits_per_pixel * pixel_clock;
 	m_n->gmch_n = link_clock * nlanes * 8;
-	fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
-
+	intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
 	m_n->link_m = pixel_clock;
 	m_n->link_n = link_clock;
-	fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
+	intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
 }
 
 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
@@ -5095,7 +5085,7 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
 	struct intel_encoder *intel_encoder, *edp_encoder = NULL;
-	struct fdi_m_n m_n = {0};
+	struct intel_link_m_n m_n = {0};
 	int target_clock, pixel_multiplier, lane, link_bw;
 	bool is_dp = false, is_cpu_edp = false;
 
@@ -5153,8 +5143,7 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
 
 	if (pixel_multiplier > 1)
 		link_bw *= pixel_multiplier;
-	ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
-			     &m_n);
+	intel_link_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, &m_n);
 
 	I915_WRITE(PIPE_DATA_M1(cpu_transcoder), TU_SIZE(m_n.tu) | m_n.gmch_m);
 	I915_WRITE(PIPE_DATA_N1(cpu_transcoder), m_n.gmch_n);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 84652ca3b161..b2130bc6c297 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -790,39 +790,6 @@ intel_dp_mode_fixup(struct drm_encoder *encoder,
 	return false;
 }
 
-struct intel_dp_m_n {
-	uint32_t	tu;
-	uint32_t	gmch_m;
-	uint32_t	gmch_n;
-	uint32_t	link_m;
-	uint32_t	link_n;
-};
-
-static void
-intel_reduce_ratio(uint32_t *num, uint32_t *den)
-{
-	while (*num > 0xffffff || *den > 0xffffff) {
-		*num >>= 1;
-		*den >>= 1;
-	}
-}
-
-static void
-intel_dp_compute_m_n(int bpp,
-		     int nlanes,
-		     int pixel_clock,
-		     int link_clock,
-		     struct intel_dp_m_n *m_n)
-{
-	m_n->tu = 64;
-	m_n->gmch_m = (pixel_clock * bpp) >> 3;
-	m_n->gmch_n = link_clock * nlanes;
-	intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
-	m_n->link_m = pixel_clock;
-	m_n->link_n = link_clock;
-	intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
-}
-
 void
 intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 		 struct drm_display_mode *adjusted_mode)
@@ -833,7 +800,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int lane_count = 4;
-	struct intel_dp_m_n m_n;
+	struct intel_link_m_n m_n;
 	int pipe = intel_crtc->pipe;
 	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
 
@@ -856,8 +823,8 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 	 * the number of bytes_per_pixel post-LUT, which we always
 	 * set up for 8-bits of R/G/B, or 3 bytes total.
 	 */
-	intel_dp_compute_m_n(intel_crtc->bpp, lane_count,
-			     mode->clock, adjusted_mode->clock, &m_n);
+	intel_link_compute_m_n(intel_crtc->bpp, lane_count,
+			       mode->clock, adjusted_mode->clock, &m_n);
 
 	if (IS_HASWELL(dev)) {
 		I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
-- 
cgit v1.2.3


From e9b73c67390a5d4faec1d22cbdf24cd6fcca53f6 Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Mon, 3 Dec 2012 21:03:14 +0000
Subject: drm/i915: Reduce memory pressure during shrinker by preallocating
 swizzle pages

On a machine with bit17 swizzling, we need to store the bit17 of the
physical page address in put-pages. This requires a memory allocation,
on average less than a page, which may be difficult to satisfy is the
request to put-pages is on behalf of the shrinker. We could allow that
allocation to pull from the reserved memory pools, but it seems much
safer to preallocate the array for tiled objects on affected machines.

v2: Export i915_gem_object_needs_bit17_swizzle() for reuse.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h        | 10 ++++++++++
 drivers/gpu/drm/i915/i915_gem.c        |  8 --------
 drivers/gpu/drm/i915/i915_gem_tiling.c | 12 ++++++++++++
 3 files changed, 22 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e9ac3603fbdb..2ab476df1dc2 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -30,6 +30,8 @@
 #ifndef _I915_DRV_H_
 #define _I915_DRV_H_
 
+#include <uapi/drm/i915_drm.h>
+
 #include "i915_reg.h"
 #include "intel_bios.h"
 #include "intel_ringbuffer.h"
@@ -1614,6 +1616,14 @@ i915_gem_object_create_stolen(struct drm_device *dev, u32 size);
 void i915_gem_object_release_stolen(struct drm_i915_gem_object *obj);
 
 /* i915_gem_tiling.c */
+inline static bool i915_gem_object_needs_bit17_swizzle(struct drm_i915_gem_object *obj)
+{
+	drm_i915_private_t *dev_priv = obj->base.dev->dev_private;
+
+	return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
+		obj->tiling_mode != I915_TILING_NONE;
+}
+
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
 void i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj);
 void i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 02d315164aa9..e4b233df576f 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -271,14 +271,6 @@ i915_gem_create_ioctl(struct drm_device *dev, void *data,
 			       args->size, &args->handle);
 }
 
-static int i915_gem_object_needs_bit17_swizzle(struct drm_i915_gem_object *obj)
-{
-	drm_i915_private_t *dev_priv = obj->base.dev->dev_private;
-
-	return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
-		obj->tiling_mode != I915_TILING_NONE;
-}
-
 static inline int
 __copy_to_user_swizzled(char __user *cpu_vaddr,
 			const char *gpu_vaddr, int gpu_offset,
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index cedbfd7b3dfa..65f1d4f3f775 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -396,6 +396,18 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 	/* we have to maintain this existing ABI... */
 	args->stride = obj->stride;
 	args->tiling_mode = obj->tiling_mode;
+
+	/* Try to preallocate memory required to save swizzling on put-pages */
+	if (i915_gem_object_needs_bit17_swizzle(obj)) {
+		if (obj->bit_17 == NULL) {
+			obj->bit_17 = kmalloc(BITS_TO_LONGS(obj->base.size >> PAGE_SHIFT) *
+					      sizeof(long), GFP_KERNEL);
+		}
+	} else {
+		kfree(obj->bit_17);
+		obj->bit_17 = NULL;
+	}
+
 	drm_gem_object_unreference(&obj->base);
 	mutex_unlock(&dev->struct_mutex);
 
-- 
cgit v1.2.3


From 97a19a247c23e286814a5ac7ec0825d0ff82a16c Mon Sep 17 00:00:00 2001
From: Tomas Janousek
Date: Sat, 8 Dec 2012 13:48:13 +0100
Subject: drm/i915: don't prevent CPU idle states

Commit 9ee32fea5f unconditionally prevents the CPU from entering idle states
until intel_dp_aux_ch completes for the first time, which never happens on my
DisplayPort-less intel gfx, causing the CPU to get rather hot.

Signed-off-by: Tomas Janousek <tomi@nomi.cz>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 2e1d80de6ccc..914ecf4acfa6 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2732,7 +2732,7 @@ void intel_irq_init(struct drm_device *dev)
 	setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
 		    (unsigned long) dev);
 
-	pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY, 0);
+	pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE);
 
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
 	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
-- 
cgit v1.2.3


From 378a6a77ae59d3312627b996ded94e23166d9e63 Mon Sep 17 00:00:00 2001
From: Sachin Kamat
Date: Fri, 7 Dec 2012 14:18:29 +0530
Subject: drm/i915: Remove duplicate inclusion of drm/drm_edid.h

drm/drm_edid.h was included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_modes.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index b00f1c83adce..49249bb97485 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -28,7 +28,6 @@
 #include <linux/fb.h>
 #include <drm/drm_edid.h>
 #include <drm/drmP.h>
-#include <drm/drm_edid.h>
 #include "intel_drv.h"
 #include "i915_drv.h"
 
-- 
cgit v1.2.3


From 3ac18232946aacf0a9807c3143f8449ed4aa68f4 Mon Sep 17 00:00:00 2001
From: Tim Gardner
Date: Fri, 7 Dec 2012 07:54:26 -0700
Subject: i915: intel_set_mode: Reduce stack allocation from 500 bytes to 2
 pointers

smatch warning:

drivers/gpu/drm/i915/intel_display.c:7019 intel_set_mode() warn: function puts
500 bytes on stack

Refactor so that saved_mode and saved_hwmode are dynamically allocated as opposed
to being automatic variables. 500 bytes seems like it could run the potential for blowing
the kernel stack.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 34832bc04931..115bf626037c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7398,11 +7398,18 @@ bool intel_set_mode(struct drm_crtc *crtc,
 {
 	struct drm_device *dev = crtc->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode;
+	struct drm_display_mode *adjusted_mode, *saved_mode, *saved_hwmode;
 	struct intel_crtc *intel_crtc;
 	unsigned disable_pipes, prepare_pipes, modeset_pipes;
 	bool ret = true;
 
+	saved_mode = kmalloc(2 * sizeof(*saved_mode), GFP_KERNEL);
+	if (!saved_mode) {
+		DRM_ERROR("i915: Could not allocate saved display mode.\n");
+		return false;
+	}
+	saved_hwmode = saved_mode + 1;
+
 	intel_modeset_affected_pipes(crtc, &modeset_pipes,
 				     &prepare_pipes, &disable_pipes);
 
@@ -7412,8 +7419,8 @@ bool intel_set_mode(struct drm_crtc *crtc,
 	for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
 		intel_crtc_disable(&intel_crtc->base);
 
-	saved_hwmode = crtc->hwmode;
-	saved_mode = crtc->mode;
+	*saved_hwmode = crtc->hwmode;
+	*saved_mode = crtc->mode;
 
 	/* Hack: Because we don't (yet) support global modeset on multiple
 	 * crtcs, we don't keep track of the new mode for more than one crtc.
@@ -7424,7 +7431,8 @@ bool intel_set_mode(struct drm_crtc *crtc,
 	if (modeset_pipes) {
 		adjusted_mode = intel_modeset_adjusted_mode(crtc, mode);
 		if (IS_ERR(adjusted_mode)) {
-			return false;
+			ret = false;
+			goto out;
 		}
 	}
 
@@ -7476,12 +7484,14 @@ bool intel_set_mode(struct drm_crtc *crtc,
 done:
 	drm_mode_destroy(dev, adjusted_mode);
 	if (!ret && crtc->enabled) {
-		crtc->hwmode = saved_hwmode;
-		crtc->mode = saved_mode;
+		crtc->hwmode = *saved_hwmode;
+		crtc->mode = *saved_mode;
 	} else {
 		intel_modeset_check_state(dev);
 	}
 
+out:
+	kfree(saved_mode);
 	return ret;
 }
 
-- 
cgit v1.2.3


From f72b3435c1a75406d82d6e252bb78f009efd4bd9 Mon Sep 17 00:00:00 2001
From: Mika Kuoppala
Date: Mon, 10 Dec 2012 15:41:48 +0200
Subject: drm/i915: Don't emit semaphore wait if wrap happened

If wrap just happened we need to prevent emitting waits for
pre wrap values. Detect this and emit no-ops instead.

v2: Use olr > seqno to detect wrap instead of *seqno == 0
as suggested by Chris Wilson.

v3: Use last used seqno to detect the wraparound. From
Chris Wilson

v4: Fixed unnecessary last_seqno assigment

References: https://bugs.freedesktop.org/show_bug.cgi?id=57967
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h         |  2 +-
 drivers/gpu/drm/i915/i915_gem.c         |  2 +-
 drivers/gpu/drm/i915/intel_ringbuffer.c | 26 +++++++++++++++++++++-----
 3 files changed, 23 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 2ab476df1dc2..9da67824dde3 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -671,7 +671,7 @@ typedef struct drm_i915_private {
 
 	struct pci_dev *bridge_dev;
 	struct intel_ring_buffer ring[I915_NUM_RINGS];
-	uint32_t next_seqno;
+	uint32_t last_seqno, next_seqno;
 
 	drm_dma_handle_t *status_page_dmah;
 	struct resource mch_res;
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index e4b233df576f..a81b78a59bd9 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1969,7 +1969,7 @@ i915_gem_get_seqno(struct drm_device *dev, u32 *seqno)
 		dev_priv->next_seqno = 1;
 	}
 
-	*seqno = dev_priv->next_seqno++;
+	*seqno = dev_priv->last_seqno = dev_priv->next_seqno++;
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 0d03dc649c5e..69bbe7bb9f6d 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -596,6 +596,13 @@ gen6_add_request(struct intel_ring_buffer *ring)
 	return 0;
 }
 
+static inline bool i915_gem_has_seqno_wrapped(struct drm_device *dev,
+					      u32 seqno)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	return dev_priv->last_seqno < seqno;
+}
+
 /**
  * intel_ring_sync - sync the waiter to the signaller on seqno
  *
@@ -626,11 +633,20 @@ gen6_ring_sync(struct intel_ring_buffer *waiter,
 	if (ret)
 		return ret;
 
-	intel_ring_emit(waiter,
-			dw1 | signaller->semaphore_register[waiter->id]);
-	intel_ring_emit(waiter, seqno);
-	intel_ring_emit(waiter, 0);
-	intel_ring_emit(waiter, MI_NOOP);
+	/* If seqno wrap happened, omit the wait with no-ops */
+	if (likely(!i915_gem_has_seqno_wrapped(waiter->dev, seqno))) {
+		intel_ring_emit(waiter,
+				dw1 |
+				signaller->semaphore_register[waiter->id]);
+		intel_ring_emit(waiter, seqno);
+		intel_ring_emit(waiter, 0);
+		intel_ring_emit(waiter, MI_NOOP);
+	} else {
+		intel_ring_emit(waiter, MI_NOOP);
+		intel_ring_emit(waiter, MI_NOOP);
+		intel_ring_emit(waiter, MI_NOOP);
+		intel_ring_emit(waiter, MI_NOOP);
+	}
 	intel_ring_advance(waiter);
 
 	return 0;
-- 
cgit v1.2.3


From 107f27a5df8ad33a351d6e82fe95ff92b428f72e Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Mon, 10 Dec 2012 13:56:17 +0200
Subject: drm/i915: Open-code i915_gpu_idle() for handling seqno wrapping

The complication is that during seqno wrapping we must be extremely
careful not to write to any ring as that will require a new seqno, and
so would recurse back into the seqno wrap handler. So we cannot call
i915_gpu_idle() as that does additional work beyond simply retiring the
current set of requests, and instead must do the minimal work ourselves
during seqno wrapping.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index a81b78a59bd9..bc73f98c3631 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1938,11 +1938,15 @@ i915_gem_handle_seqno_wrap(struct drm_device *dev)
 	if (ret == 0)
 		return ret;
 
-	ret = i915_gpu_idle(dev);
-	if (ret)
-		return ret;
-
+	/* Carefully retire all requests without writing to the rings */
+	for_each_ring(ring, dev_priv, i) {
+		ret = intel_ring_idle(ring);
+		if (ret)
+			return ret;
+	}
 	i915_gem_retire_requests(dev);
+
+	/* Finally reset hw state */
 	for_each_ring(ring, dev_priv, i) {
 		ret = intel_ring_handle_seqno_wrap(ring);
 		if (ret)
-- 
cgit v1.2.3


From 9e8e36879f268f1652e11b1c8560bbb67cf4f08e Mon Sep 17 00:00:00 2001
From: Mika Kuoppala
Date: Tue, 4 Dec 2012 15:12:05 +0200
Subject: drm/i915: Set initial seqno value close to wrap boundary

To gain confidence in the wrap handling, make it happen quite
soon after the boot.

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index bc73f98c3631..6380c6083cb2 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3943,7 +3943,7 @@ i915_gem_init_hw(struct drm_device *dev)
 			goto cleanup_bsd_ring;
 	}
 
-	dev_priv->next_seqno = 1;
+	dev_priv->next_seqno = (u32)-1 - 0x1000;
 
 	/*
 	 * XXX: There was some w/a described somewhere suggesting loading
-- 
cgit v1.2.3


From 20afbda209d708be66944907966486d0c1331cb8 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Tue, 11 Dec 2012 14:05:07 +0100
Subject: drm/i915: Fixup hpd irq register setup ordering

For GMCH platforms we set up the hpd irq registers in the irq
postinstall hook. But since we only enable the irq sources we actually
need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask
into account, no hpd interrupt sources is enabled since

commit 52d7ecedac3f96fb562cb482c139015372728638
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sat Dec 1 21:03:22 2012 +0100

    drm/i915: reorder setup sequence to have irqs for output setup

Wrongly set-up interrupts also lead to broken hw-based load-detection
on at least GM45, resulting in ghost VGA/TV-out outputs.

To fix this, delay the hotplug register setup until after all outputs
are set up, by moving it into a new dev_priv->display.hpd_irq_callback.
We might also move the PCH_SPLIT platforms to such a setup eventually.

Another funny part is that we need to delay the fbdev initial config
probing until after the hpd regs are setup, for otherwise it'll detect
ghost outputs. But we can only enable the hpd interrupt handling
itself (and the output polling) _after_ that initial scan, due to
massive locking brain-damage in the fbdev setup code. Add a big
comment to explain this cute little dragon lair.

v2: Encapsulate all the fbdev handling by wrapping the move call into
intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson.

v3: Applied bikeshed from Jesse Barnes.

v4: Imre Deak noticed that we also need to call intel_hpd_init after
the drm_irqinstall calls in the gpu reset and resume paths - otherwise
hotplug will be broken. Also improve the comment a bit about why
hpd_init needs to be called before we set up the initial fbdev config.

Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_dma.c  | 15 ++++++++++
 drivers/gpu/drm/i915/i915_drv.c  |  2 ++
 drivers/gpu/drm/i915/i915_drv.h  |  2 ++
 drivers/gpu/drm/i915/i915_irq.c  | 63 +++++++++++++++++++++++++++++++---------
 drivers/gpu/drm/i915/intel_drv.h |  1 +
 drivers/gpu/drm/i915/intel_fb.c  | 10 ++++++-
 6 files changed, 79 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 93630669c6dc..0c2ab40ab2ed 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1318,6 +1318,21 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	if (ret)
 		goto cleanup_gem;
 
+	/* Only enable hotplug handling once the fbdev is fully set up. */
+	intel_hpd_init(dev);
+
+	/*
+	 * Some ports require correctly set-up hpd registers for detection to
+	 * work properly (leading to ghost connected connector status), e.g. VGA
+	 * on gm45.  Hence we can only set up the initial fbdev config after hpd
+	 * irqs are fully enabled. Now we should scan for the initial config
+	 * only once hotplug handling is enabled, but due to screwed-up locking
+	 * around kms/fbdev init we can't protect the fdbev initial config
+	 * scanning against hotplug events. Hence do this first and ignore the
+	 * tiny window where we will loose hotplug notifactions.
+	 */
+	intel_fbdev_initial_config(dev);
+
 	/* Only enable hotplug handling once the fbdev is fully set up. */
 	dev_priv->enable_hotplug_processing = true;
 
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index a12921892446..fbd0b28b7200 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -566,6 +566,7 @@ static int __i915_drm_thaw(struct drm_device *dev)
 		intel_modeset_init_hw(dev);
 		intel_modeset_setup_hw_state(dev, false);
 		drm_irq_install(dev);
+		intel_hpd_init(dev);
 	}
 
 	intel_opregion_init(dev);
@@ -871,6 +872,7 @@ int i915_reset(struct drm_device *dev)
 
 		drm_irq_uninstall(dev);
 		drm_irq_install(dev);
+		intel_hpd_init(dev);
 	} else {
 		mutex_unlock(&dev->struct_mutex);
 	}
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 9da67824dde3..e55303e2f74e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -297,6 +297,7 @@ struct drm_i915_display_funcs {
 			  struct drm_i915_gem_object *obj);
 	int (*update_plane)(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 			    int x, int y);
+	void (*hpd_irq_setup)(struct drm_device *dev);
 	/* clock updates for mode set */
 	/* cursor updates */
 	/* render clock increase/decrease */
@@ -1343,6 +1344,7 @@ void i915_hangcheck_elapsed(unsigned long data);
 void i915_handle_error(struct drm_device *dev, bool wedged);
 
 extern void intel_irq_init(struct drm_device *dev);
+extern void intel_hpd_init(struct drm_device *dev);
 extern void intel_gt_init(struct drm_device *dev);
 extern void intel_gt_reset(struct drm_device *dev);
 
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 914ecf4acfa6..551f370657b7 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1995,7 +1995,6 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	u32 enable_mask;
-	u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
 	u32 pipestat_enable = PLANE_FLIP_DONE_INT_EN_VLV;
 	u32 render_irqs;
 	u16 msid;
@@ -2024,6 +2023,9 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
 	msid |= (1<<14);
 	pci_write_config_word(dev_priv->dev->pdev, 0x98, msid);
 
+	I915_WRITE(PORT_HOTPLUG_EN, 0);
+	POSTING_READ(PORT_HOTPLUG_EN);
+
 	I915_WRITE(VLV_IMR, dev_priv->irq_mask);
 	I915_WRITE(VLV_IER, enable_mask);
 	I915_WRITE(VLV_IIR, 0xffffffff);
@@ -2053,6 +2055,15 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
 #endif
 
 	I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE);
+
+	return 0;
+}
+
+static void valleyview_hpd_irq_setup(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+
 	/* Note HDMI and DP share bits */
 	if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
 		hotplug_en |= HDMIB_HOTPLUG_INT_EN;
@@ -2070,8 +2081,6 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
 	}
 
 	I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-
-	return 0;
 }
 
 static void valleyview_irq_uninstall(struct drm_device *dev)
@@ -2301,6 +2310,9 @@ static int i915_irq_postinstall(struct drm_device *dev)
 		I915_USER_INTERRUPT;
 
 	if (I915_HAS_HOTPLUG(dev)) {
+		I915_WRITE(PORT_HOTPLUG_EN, 0);
+		POSTING_READ(PORT_HOTPLUG_EN);
+
 		/* Enable in IER... */
 		enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
 		/* and unmask in IMR */
@@ -2311,8 +2323,18 @@ static int i915_irq_postinstall(struct drm_device *dev)
 	I915_WRITE(IER, enable_mask);
 	POSTING_READ(IER);
 
+	intel_opregion_enable_asle(dev);
+
+	return 0;
+}
+
+static void i915_hpd_irq_setup(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	u32 hotplug_en;
+
 	if (I915_HAS_HOTPLUG(dev)) {
-		u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+		hotplug_en = I915_READ(PORT_HOTPLUG_EN);
 
 		if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
 			hotplug_en |= HDMIB_HOTPLUG_INT_EN;
@@ -2333,10 +2355,6 @@ static int i915_irq_postinstall(struct drm_device *dev)
 
 		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
 	}
-
-	intel_opregion_enable_asle(dev);
-
-	return 0;
 }
 
 static irqreturn_t i915_irq_handler(int irq, void *arg)
@@ -2496,7 +2514,6 @@ static void i965_irq_preinstall(struct drm_device * dev)
 static int i965_irq_postinstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	u32 hotplug_en;
 	u32 enable_mask;
 	u32 error_mask;
 
@@ -2538,6 +2555,19 @@ static int i965_irq_postinstall(struct drm_device *dev)
 	I915_WRITE(IER, enable_mask);
 	POSTING_READ(IER);
 
+	I915_WRITE(PORT_HOTPLUG_EN, 0);
+	POSTING_READ(PORT_HOTPLUG_EN);
+
+	intel_opregion_enable_asle(dev);
+
+	return 0;
+}
+
+static void i965_hpd_irq_setup(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	u32 hotplug_en;
+
 	/* Note HDMI and DP share hotplug bits */
 	hotplug_en = 0;
 	if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
@@ -2572,10 +2602,6 @@ static int i965_irq_postinstall(struct drm_device *dev)
 	/* Ignore TV since it's buggy */
 
 	I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-
-	intel_opregion_enable_asle(dev);
-
-	return 0;
 }
 
 static irqreturn_t i965_irq_handler(int irq, void *arg)
@@ -2754,6 +2780,7 @@ void intel_irq_init(struct drm_device *dev)
 		dev->driver->irq_uninstall = valleyview_irq_uninstall;
 		dev->driver->enable_vblank = valleyview_enable_vblank;
 		dev->driver->disable_vblank = valleyview_disable_vblank;
+		dev_priv->display.hpd_irq_setup = valleyview_hpd_irq_setup;
 	} else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
 		/* Share pre & uninstall handlers with ILK/SNB */
 		dev->driver->irq_handler = ivybridge_irq_handler;
@@ -2780,13 +2807,23 @@ void intel_irq_init(struct drm_device *dev)
 			dev->driver->irq_postinstall = i915_irq_postinstall;
 			dev->driver->irq_uninstall = i915_irq_uninstall;
 			dev->driver->irq_handler = i915_irq_handler;
+			dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
 		} else {
 			dev->driver->irq_preinstall = i965_irq_preinstall;
 			dev->driver->irq_postinstall = i965_irq_postinstall;
 			dev->driver->irq_uninstall = i965_irq_uninstall;
 			dev->driver->irq_handler = i965_irq_handler;
+			dev_priv->display.hpd_irq_setup = i965_hpd_irq_setup;
 		}
 		dev->driver->enable_vblank = i915_enable_vblank;
 		dev->driver->disable_vblank = i915_disable_vblank;
 	}
 }
+
+void intel_hpd_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->display.hpd_irq_setup)
+		dev_priv->display.hpd_irq_setup(dev);
+}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 7ca7772eaccd..22728f2c1d83 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -587,6 +587,7 @@ extern int intel_framebuffer_init(struct drm_device *dev,
 				  struct drm_mode_fb_cmd2 *mode_cmd,
 				  struct drm_i915_gem_object *obj);
 extern int intel_fbdev_init(struct drm_device *dev);
+extern void intel_fbdev_initial_config(struct drm_device *dev);
 extern void intel_fbdev_fini(struct drm_device *dev);
 extern void intel_fbdev_set_suspend(struct drm_device *dev, int state);
 extern void intel_prepare_page_flip(struct drm_device *dev, int plane);
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index b7773e548911..822896782cd0 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -243,10 +243,18 @@ int intel_fbdev_init(struct drm_device *dev)
 	}
 
 	drm_fb_helper_single_add_all_connectors(&ifbdev->helper);
-	drm_fb_helper_initial_config(&ifbdev->helper, 32);
+
 	return 0;
 }
 
+void intel_fbdev_initial_config(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	/* Due to peculiar init order wrt to hpd handling this is separate. */
+	drm_fb_helper_initial_config(&dev_priv->fbdev->helper, 32);
+}
+
 void intel_fbdev_fini(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-- 
cgit v1.2.3


From 09153000b8ca32a539a1207edebabd0d40b6c61b Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Wed, 12 Dec 2012 14:06:44 +0100
Subject: drm/i915: rework locking for intel_dpio|sbi_read|write

Spinning for up to 200 us with interrupts locked out is not good. So
let's just spin (and even that seems to be excessive).

And we don't call these functions from interrupt context, so this is
not required. Besides that doing anything in interrupt contexts which
might take a few hundred us is a no-go. So just convert the entire
thing to a mutex. Also move the mutex-grabbing out of the read/write
functions (add a WARN_ON(!is_locked)) instead) since all callers are
nicely grouped together.

Finally the real motivation for this change: Dont grab the modeset
mutex in the dpio debugfs file, we don't need that consistency. And
correctness of the dpio interface is ensured with the dpio_lock.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_debugfs.c  |  4 +--
 drivers/gpu/drm/i915/i915_dma.c      |  2 +-
 drivers/gpu/drm/i915/i915_drv.h      |  2 +-
 drivers/gpu/drm/i915/intel_display.c | 53 ++++++++++++++----------------------
 4 files changed, 25 insertions(+), 36 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 7e516eebdc80..7047c4a9fb9e 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1633,7 +1633,7 @@ static int i915_dpio_info(struct seq_file *m, void *data)
 		return 0;
 	}
 
-	ret = mutex_lock_interruptible(&dev->mode_config.mutex);
+	ret = mutex_lock_interruptible(&dev_priv->dpio_lock);
 	if (ret)
 		return ret;
 
@@ -1662,7 +1662,7 @@ static int i915_dpio_info(struct seq_file *m, void *data)
 	seq_printf(m, "DPIO_FASTCLK_DISABLE: 0x%08x\n",
 		   intel_dpio_read(dev_priv, DPIO_FASTCLK_DISABLE));
 
-	mutex_unlock(&dev->mode_config.mutex);
+	mutex_unlock(&dev_priv->dpio_lock);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 0c2ab40ab2ed..a99c46d1e49a 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1599,7 +1599,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	spin_lock_init(&dev_priv->irq_lock);
 	spin_lock_init(&dev_priv->error_lock);
 	spin_lock_init(&dev_priv->rps.lock);
-	spin_lock_init(&dev_priv->dpio_lock);
+	mutex_init(&dev_priv->dpio_lock);
 
 	mutex_init(&dev_priv->rps.hw_lock);
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e55303e2f74e..514aee895ecb 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -686,7 +686,7 @@ typedef struct drm_i915_private {
 	struct pm_qos_request pm_qos;
 
 	/* DPIO indirect register protection */
-	spinlock_t dpio_lock;
+	struct mutex dpio_lock;
 
 	/** Cached value of IMR to avoid reads in updating the bitfield */
 	u32 pipestat[2];
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 115bf626037c..2a01b09221fb 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -416,13 +416,11 @@ static const intel_limit_t intel_limits_vlv_dp = {
 
 u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
 {
-	unsigned long flags;
-	u32 val = 0;
+	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
 
-	spin_lock_irqsave(&dev_priv->dpio_lock, flags);
 	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
 		DRM_ERROR("DPIO idle wait timed out\n");
-		goto out_unlock;
+		return 0;
 	}
 
 	I915_WRITE(DPIO_REG, reg);
@@ -430,24 +428,20 @@ u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
 		   DPIO_BYTE);
 	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
 		DRM_ERROR("DPIO read wait timed out\n");
-		goto out_unlock;
+		return 0;
 	}
-	val = I915_READ(DPIO_DATA);
 
-out_unlock:
-	spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
-	return val;
+	return I915_READ(DPIO_DATA);
 }
 
 static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
 			     u32 val)
 {
-	unsigned long flags;
+	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
 
-	spin_lock_irqsave(&dev_priv->dpio_lock, flags);
 	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
 		DRM_ERROR("DPIO idle wait timed out\n");
-		goto out_unlock;
+		return;
 	}
 
 	I915_WRITE(DPIO_DATA, val);
@@ -456,9 +450,6 @@ static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
 		   DPIO_BYTE);
 	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
 		DRM_ERROR("DPIO write wait timed out\n");
-
-out_unlock:
-       spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
 }
 
 static void vlv_init_dpio(struct drm_device *dev)
@@ -1455,13 +1446,12 @@ static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
 static void
 intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value)
 {
-	unsigned long flags;
+	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
 
-	spin_lock_irqsave(&dev_priv->dpio_lock, flags);
 	if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
 				100)) {
 		DRM_ERROR("timeout waiting for SBI to become ready\n");
-		goto out_unlock;
+		return;
 	}
 
 	I915_WRITE(SBI_ADDR,
@@ -1475,24 +1465,19 @@ intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value)
 	if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
 				100)) {
 		DRM_ERROR("timeout waiting for SBI to complete write transaction\n");
-		goto out_unlock;
+		return;
 	}
-
-out_unlock:
-	spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
 }
 
 static u32
 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg)
 {
-	unsigned long flags;
-	u32 value = 0;
+	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
 
-	spin_lock_irqsave(&dev_priv->dpio_lock, flags);
 	if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
 				100)) {
 		DRM_ERROR("timeout waiting for SBI to become ready\n");
-		goto out_unlock;
+		return 0;
 	}
 
 	I915_WRITE(SBI_ADDR,
@@ -1504,14 +1489,10 @@ intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg)
 	if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
 				100)) {
 		DRM_ERROR("timeout waiting for SBI to complete read transaction\n");
-		goto out_unlock;
+		return 0;
 	}
 
-	value = I915_READ(SBI_DATA);
-
-out_unlock:
-	spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
-	return value;
+	return I915_READ(SBI_DATA);
 }
 
 /**
@@ -2924,6 +2905,8 @@ static void lpt_program_iclkip(struct drm_crtc *crtc)
 	u32 divsel, phaseinc, auxdiv, phasedir = 0;
 	u32 temp;
 
+	mutex_lock(&dev_priv->dpio_lock);
+
 	/* It is necessary to ungate the pixclk gate prior to programming
 	 * the divisors, and gate it back when it is done.
 	 */
@@ -3005,6 +2988,8 @@ static void lpt_program_iclkip(struct drm_crtc *crtc)
 	udelay(24);
 
 	I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
+
+	mutex_unlock(&dev_priv->dpio_lock);
 }
 
 /*
@@ -4222,6 +4207,8 @@ static void vlv_update_pll(struct drm_crtc *crtc,
 	bool is_sdvo;
 	u32 temp;
 
+	mutex_lock(&dev_priv->dpio_lock);
+
 	is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
 		intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
 
@@ -4305,6 +4292,8 @@ static void vlv_update_pll(struct drm_crtc *crtc,
 			temp |= (1 << 21);
 		intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL2, temp);
 	}
+
+	mutex_unlock(&dev_priv->dpio_lock);
 }
 
 static void i9xx_update_pll(struct drm_crtc *crtc,
-- 
cgit v1.2.3


From b696519e51910943f084ea0fc8bdceceae8383ef Mon Sep 17 00:00:00 2001
From: Damien Lespiau
Date: Thu, 13 Dec 2012 16:08:59 +0000
Subject: drm/i915: Cleanup SHOTPLUG_CTL status bits definitions

Those status bits don't follow the usual pattern: _MASK (those bits are
write 1 to clear, useful to select the value we want to read) and the
values shifted by the same amount.

Cleaned that that up when poking at the register for testing purposes,
might as well upstream that cleanup.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_reg.h | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f2a5ea694684..f83480403ccc 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3558,27 +3558,30 @@
 #define PORTD_PULSE_DURATION_6ms        (2 << 18)
 #define PORTD_PULSE_DURATION_100ms      (3 << 18)
 #define PORTD_PULSE_DURATION_MASK	(3 << 18)
-#define PORTD_HOTPLUG_NO_DETECT         (0)
-#define PORTD_HOTPLUG_SHORT_DETECT      (1 << 16)
-#define PORTD_HOTPLUG_LONG_DETECT       (1 << 17)
+#define PORTD_HOTPLUG_STATUS_MASK	(0x3 << 16)
+#define  PORTD_HOTPLUG_NO_DETECT	(0 << 16)
+#define  PORTD_HOTPLUG_SHORT_DETECT	(1 << 16)
+#define  PORTD_HOTPLUG_LONG_DETECT	(2 << 16)
 #define PORTC_HOTPLUG_ENABLE            (1 << 12)
 #define PORTC_PULSE_DURATION_2ms        (0)
 #define PORTC_PULSE_DURATION_4_5ms      (1 << 10)
 #define PORTC_PULSE_DURATION_6ms        (2 << 10)
 #define PORTC_PULSE_DURATION_100ms      (3 << 10)
 #define PORTC_PULSE_DURATION_MASK	(3 << 10)
-#define PORTC_HOTPLUG_NO_DETECT         (0)
-#define PORTC_HOTPLUG_SHORT_DETECT      (1 << 8)
-#define PORTC_HOTPLUG_LONG_DETECT       (1 << 9)
+#define PORTC_HOTPLUG_STATUS_MASK	(0x3 << 8)
+#define  PORTC_HOTPLUG_NO_DETECT	(0 << 8)
+#define  PORTC_HOTPLUG_SHORT_DETECT	(1 << 8)
+#define  PORTC_HOTPLUG_LONG_DETECT	(2 << 8)
 #define PORTB_HOTPLUG_ENABLE            (1 << 4)
 #define PORTB_PULSE_DURATION_2ms        (0)
 #define PORTB_PULSE_DURATION_4_5ms      (1 << 2)
 #define PORTB_PULSE_DURATION_6ms        (2 << 2)
 #define PORTB_PULSE_DURATION_100ms      (3 << 2)
 #define PORTB_PULSE_DURATION_MASK	(3 << 2)
-#define PORTB_HOTPLUG_NO_DETECT         (0)
-#define PORTB_HOTPLUG_SHORT_DETECT      (1 << 0)
-#define PORTB_HOTPLUG_LONG_DETECT       (1 << 1)
+#define PORTB_HOTPLUG_STATUS_MASK	(0x3 << 0)
+#define  PORTB_HOTPLUG_NO_DETECT	(0 << 0)
+#define  PORTB_HOTPLUG_SHORT_DETECT	(1 << 0)
+#define  PORTB_HOTPLUG_LONG_DETECT	(2 << 0)
 
 #define PCH_GPIOA               0xc5010
 #define PCH_GPIOB               0xc5014
-- 
cgit v1.2.3


From b0ea7d37a8f63eeec5ae80b4a6403cfba01da02f Mon Sep 17 00:00:00 2001
From: Damien Lespiau
Date: Thu, 13 Dec 2012 16:09:00 +0000
Subject: drm/i915/hdmi: Read the HPD status before trying to read the EDID

If you unplug the hdmi connector slowly enough, the hotplug interrupt
fires but then the kernel code tries to read the EDID and succeeds
(because the connector is still half connected, the HPD pin is shorter
than the others, and DDC works). Since EDID succeeds it thinks the
monitor is still connected.

To prevent that, read the live HPD status in the hotplug handler before
trying to read the EDID.

v2: Rename the function to ibx_ (Chris Wilson)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55372
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 33 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h     |  3 +++
 drivers/gpu/drm/i915/intel_hdmi.c    |  9 +++++++--
 3 files changed, 43 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 2a01b09221fb..6adeabda2587 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -985,6 +985,39 @@ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
 	}
 }
 
+/*
+ * ibx_digital_port_connected - is the specified port connected?
+ * @dev_priv: i915 private structure
+ * @port: the port to test
+ *
+ * Returns true if @port is connected, false otherwise.
+ */
+bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
+				struct intel_digital_port *port)
+{
+	u32 bit;
+
+	/* XXX: IBX has different SDEISR bits */
+	if (HAS_PCH_IBX(dev_priv->dev))
+		return true;
+
+	switch(port->port) {
+	case PORT_B:
+		bit = SDE_PORTB_HOTPLUG_CPT;
+		break;
+	case PORT_C:
+		bit = SDE_PORTC_HOTPLUG_CPT;
+		break;
+	case PORT_D:
+		bit = SDE_PORTD_HOTPLUG_CPT;
+		break;
+	default:
+		return true;
+	}
+
+	return I915_READ(SDEISR) & bit;
+}
+
 static const char *state_string(bool enabled)
 {
 	return enabled ? "on" : "off";
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 22728f2c1d83..53d4c8fec2a0 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -545,6 +545,9 @@ hdmi_to_dig_port(struct intel_hdmi *intel_hdmi)
 	return container_of(intel_hdmi, struct intel_digital_port, hdmi);
 }
 
+bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
+				struct intel_digital_port *port);
+
 extern void intel_connector_attach_encoder(struct intel_connector *connector,
 					   struct intel_encoder *encoder);
 extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 53df0a88a6a8..9f834d324cfd 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -793,16 +793,21 @@ static bool g4x_hdmi_connected(struct intel_hdmi *intel_hdmi)
 static enum drm_connector_status
 intel_hdmi_detect(struct drm_connector *connector, bool force)
 {
+	struct drm_device *dev = connector->dev;
 	struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
 	struct intel_digital_port *intel_dig_port =
 		hdmi_to_dig_port(intel_hdmi);
 	struct intel_encoder *intel_encoder = &intel_dig_port->base;
-	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct edid *edid;
 	enum drm_connector_status status = connector_status_disconnected;
 
-	if (IS_G4X(connector->dev) && !g4x_hdmi_connected(intel_hdmi))
+
+	if (IS_G4X(dev) && !g4x_hdmi_connected(intel_hdmi))
 		return status;
+	else if (HAS_PCH_SPLIT(dev) &&
+		 !ibx_digital_port_connected(dev_priv, intel_dig_port))
+		 return status;
 
 	intel_hdmi->has_hdmi_sink = false;
 	intel_hdmi->has_audio = false;
-- 
cgit v1.2.3


From 1b4696394aeb8a550f8537e92ae6cc65f444dca0 Mon Sep 17 00:00:00 2001
From: Damien Lespiau
Date: Thu, 13 Dec 2012 16:09:01 +0000
Subject: drm/i915/dp: Read the HPD status before trying to read the DPCD

Just like:

  Author: Damien Lespiau <damien.lespiau@intel.com>
  Date:   Wed Dec 12 19:37:22 2012 +0000

      drm/i915/hdmi: Read the HPD status before trying to read the EDID

But this time for DiplayPort.

v2: Adapt to the ibx_ name change and don't add commit hash (Chris
Wilson, Jani Nikula)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index b2130bc6c297..19a0d8984079 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2248,6 +2248,8 @@ static enum drm_connector_status
 ironlake_dp_detect(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	enum drm_connector_status status;
 
 	/* Can't disconnect eDP, but you can close the lid... */
@@ -2258,6 +2260,9 @@ ironlake_dp_detect(struct intel_dp *intel_dp)
 		return status;
 	}
 
+	if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
+		return connector_status_disconnected;
+
 	return intel_dp_detect_dpcd(intel_dp);
 }
 
-- 
cgit v1.2.3


From 577c7a505b5601a9a441039dd37543775f9af8f5 Mon Sep 17 00:00:00 2001
From: Damien Lespiau
Date: Thu, 13 Dec 2012 16:09:02 +0000
Subject: drm/i915/dp: Log the DPCD only if we have successfully retrieved one

Moving the DPCD just after a successful read will allow to:
  - log all DPCD reads (eDP ones, changes signalled by HPD IRQ)
  - don't log it if we haven't been able to read it

v2: Be sure to log the DPCD when a downstream port does not have HPD
    support and the branch device asserts HPD (Jani Nikula)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 19a0d8984079..5ed8fb3435ee 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2084,10 +2084,16 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 static bool
 intel_dp_get_dpcd(struct intel_dp *intel_dp)
 {
+	char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3];
+
 	if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
 					   sizeof(intel_dp->dpcd)) == 0)
 		return false; /* aux transfer failed */
 
+	hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd),
+			   32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false);
+	DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump);
+
 	if (intel_dp->dpcd[DP_DPCD_REV] == 0)
 		return false; /* DPCD not present */
 
@@ -2353,7 +2359,6 @@ intel_dp_detect(struct drm_connector *connector, bool force)
 	struct drm_device *dev = connector->dev;
 	enum drm_connector_status status;
 	struct edid *edid = NULL;
-	char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3];
 
 	intel_dp->has_audio = false;
 
@@ -2362,10 +2367,6 @@ intel_dp_detect(struct drm_connector *connector, bool force)
 	else
 		status = g4x_dp_detect(intel_dp);
 
-	hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd),
-			   32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false);
-	DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump);
-
 	if (status != connector_status_connected)
 		return status;
 
-- 
cgit v1.2.3


From c36346e302b3a36bfb10b58167b69ab7ac95f10a Mon Sep 17 00:00:00 2001
From: Damien Lespiau
Date: Thu, 13 Dec 2012 16:09:03 +0000
Subject: drm/i915: Implement ibx_digital_port_connected() for IBX

CPT+ PCHs have different bit definition to read the HPD live status. I
don't have an ILK with digital ports handy, which is why this patch is
separate from the CPT+ implementation. If the docs don't lie, it should
all be fine though.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 44 +++++++++++++++++++++++-------------
 1 file changed, 28 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6adeabda2587..7f1b07c9061d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -997,22 +997,34 @@ bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
 {
 	u32 bit;
 
-	/* XXX: IBX has different SDEISR bits */
-	if (HAS_PCH_IBX(dev_priv->dev))
-		return true;
-
-	switch(port->port) {
-	case PORT_B:
-		bit = SDE_PORTB_HOTPLUG_CPT;
-		break;
-	case PORT_C:
-		bit = SDE_PORTC_HOTPLUG_CPT;
-		break;
-	case PORT_D:
-		bit = SDE_PORTD_HOTPLUG_CPT;
-		break;
-	default:
-		return true;
+	if (HAS_PCH_IBX(dev_priv->dev)) {
+		switch(port->port) {
+		case PORT_B:
+			bit = SDE_PORTB_HOTPLUG;
+			break;
+		case PORT_C:
+			bit = SDE_PORTC_HOTPLUG;
+			break;
+		case PORT_D:
+			bit = SDE_PORTD_HOTPLUG;
+			break;
+		default:
+			return true;
+		}
+	} else {
+		switch(port->port) {
+		case PORT_B:
+			bit = SDE_PORTB_HOTPLUG_CPT;
+			break;
+		case PORT_C:
+			bit = SDE_PORTC_HOTPLUG_CPT;
+			break;
+		case PORT_D:
+			bit = SDE_PORTD_HOTPLUG_CPT;
+			break;
+		default:
+			return true;
+		}
 	}
 
 	return I915_READ(SDEISR) & bit;
-- 
cgit v1.2.3


From 3f8c65d60467c6ccf4d690f5266567d6c423ae7d Mon Sep 17 00:00:00 2001
From: Damien Lespiau
Date: Thu, 13 Dec 2012 16:09:04 +0000
Subject: drm/i915: Remove stale comment about intel_dp_detect()

The function doesn't use any of the registers mentioned, nor does it
return true or false. Hard to do worse. Remove it, the function is
absolutely descriptive enough to not need any comment.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5ed8fb3435ee..185bf4e7614e 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2343,13 +2343,6 @@ intel_dp_get_edid_modes(struct drm_connector *connector, struct i2c_adapter *ada
 	return intel_ddc_get_modes(connector, adapter);
 }
 
-
-/**
- * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
- *
- * \return true if DP port is connected.
- * \return false if DP port is disconnected.
- */
 static enum drm_connector_status
 intel_dp_detect(struct drm_connector *connector, bool force)
 {
-- 
cgit v1.2.3


From eb119bd612906519cacef2536a9a524c2da5f7fb Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Sun, 16 Dec 2012 12:43:36 +0000
Subject: drm/i915: Access to snooped system memory through the GTT is
 incoherent

We ignore all the user requests to handle flushing to the GTT domain if
the user requests such on a snoopable bo, and as such access through the
GTT to such pages remains incoherent. The specs even warn that such
behaviour is undefined - a strong reason never to do so.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 6380c6083cb2..d15c86279d02 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1341,6 +1341,12 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 
 	trace_i915_gem_object_fault(obj, page_offset, true, write);
 
+	/* Access to snoopable pages through the GTT is incoherent. */
+	if (obj->cache_level != I915_CACHE_NONE && !HAS_LLC(dev)) {
+		ret = -EINVAL;
+		goto unlock;
+	}
+
 	/* Now bind it into the GTT if needed */
 	ret = i915_gem_object_pin(obj, 0, true, false);
 	if (ret)
-- 
cgit v1.2.3


From 88afe715dd5469bc24ca7a19ac62dd3c241cab48 Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Sun, 16 Dec 2012 12:15:41 +0000
Subject: drm/i915: Clear the stolen fb before enabling

As the stolen memory region will contain the contents of whatever was
last there, it invariably contains garbage. To be consistent with the
shmemfs backed fb and the expectations of the fb layer, we need to clear
the fb prior to installing it as an fbcon.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58111
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Fixup sparse __iomem confusion reported by Wu Fengguang.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_fb.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 822896782cd0..71d55801c0d9 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -155,6 +155,13 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
 	drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
 	drm_fb_helper_fill_var(info, &ifbdev->helper, sizes->fb_width, sizes->fb_height);
 
+	/* If the object is shmemfs backed, it will have given us zeroed pages.
+	 * If the object is stolen however, it will be full of whatever
+	 * garbage was left in there.
+	 */
+	if (ifbdev->ifb.obj->stolen)
+		memset_io(info->screen_base, 0, info->screen_size);
+
 	/* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */
 
 	DRM_DEBUG_KMS("allocated %dx%d fb: 0x%08x, bo %p\n",
-- 
cgit v1.2.3


From 681e5811f88b7ecca77734421adafb62f19563be Mon Sep 17 00:00:00 2001
From: Paulo Zanoni
Date: Thu, 6 Dec 2012 11:12:38 -0200
Subject: drm/i915: check for the PCH when setting pch_transcoder

Don't check the CPU, it doesn't have any PCH transcoder.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7f1b07c9061d..fa73b4ad88bb 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1789,7 +1789,7 @@ static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
 	int reg;
 	u32 val;
 
-	if (IS_HASWELL(dev_priv->dev))
+	if (HAS_PCH_LPT(dev_priv->dev))
 		pch_transcoder = TRANSCODER_A;
 	else
 		pch_transcoder = pipe;
-- 
cgit v1.2.3


From a0e63c22ee6daae8fda98e1c6eaff5f5f1e2ba31 Mon Sep 17 00:00:00 2001
From: Paulo Zanoni
Date: Thu, 6 Dec 2012 11:12:39 -0200
Subject: drm/i915: remove leftover display.update_wm assignment

This was moved to intel_init_pm.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index fa73b4ad88bb..f02ec7b7d6eb 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8284,8 +8284,7 @@ static void intel_init_display(struct drm_device *dev)
 		} else if (IS_HASWELL(dev)) {
 			dev_priv->display.fdi_link_train = hsw_fdi_link_train;
 			dev_priv->display.write_eld = haswell_write_eld;
-		} else
-			dev_priv->display.update_wm = NULL;
+		}
 	} else if (IS_G4X(dev)) {
 		dev_priv->display.write_eld = g4x_write_eld;
 	}
-- 
cgit v1.2.3


From f0a3424e964ec8e934497a0724cd1d58690fd9ab Mon Sep 17 00:00:00 2001
From: Paulo Zanoni
Date: Thu, 6 Dec 2012 16:51:50 -0200
Subject: drm/i915: add intel_dp_set_signal_levels

So we can de-duplicate code that's inside intel_dp_start_link_train
and intel_dp_complete_link_train.

V2: Rebase since patch 3/5 was discarded.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c | 69 ++++++++++++++++++++---------------------
 1 file changed, 33 insertions(+), 36 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 185bf4e7614e..2d3b26832397 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1587,7 +1587,7 @@ intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_ST
 }
 
 static uint32_t
-intel_dp_signal_levels(uint8_t train_set)
+intel_gen4_signal_levels(uint8_t train_set)
 {
 	uint32_t	signal_levels = 0;
 
@@ -1685,7 +1685,7 @@ intel_gen7_edp_signal_levels(uint8_t train_set)
 
 /* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */
 static uint32_t
-intel_dp_signal_levels_hsw(uint8_t train_set)
+intel_hsw_signal_levels(uint8_t train_set)
 {
 	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
 					 DP_TRAIN_PRE_EMPHASIS_MASK);
@@ -1717,6 +1717,34 @@ intel_dp_signal_levels_hsw(uint8_t train_set)
 	}
 }
 
+/* Properly updates "DP" with the correct signal levels. */
+static void
+intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	uint32_t signal_levels, mask;
+	uint8_t train_set = intel_dp->train_set[0];
+
+	if (IS_HASWELL(dev)) {
+		signal_levels = intel_hsw_signal_levels(train_set);
+		mask = DDI_BUF_EMP_MASK;
+	} else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
+		signal_levels = intel_gen7_edp_signal_levels(train_set);
+		mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
+	} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+		signal_levels = intel_gen6_edp_signal_levels(train_set);
+		mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB;
+	} else {
+		signal_levels = intel_gen4_signal_levels(train_set);
+		mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK;
+	}
+
+	DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels);
+
+	*DP = (*DP & ~mask) | signal_levels;
+}
+
 static bool
 intel_dp_set_link_train(struct intel_dp *intel_dp,
 			uint32_t dp_reg_value,
@@ -1853,24 +1881,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 	for (;;) {
 		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
 		uint8_t	    link_status[DP_LINK_STATUS_SIZE];
-		uint32_t    signal_levels;
-
-		if (IS_HASWELL(dev)) {
-			signal_levels = intel_dp_signal_levels_hsw(
-							intel_dp->train_set[0]);
-			DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels;
-		} else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
-			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
-			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
-		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
-			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
-			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
-		} else {
-			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
-			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
-		}
-		DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n",
-			      signal_levels);
+
+		intel_dp_set_signal_levels(intel_dp, &DP);
 
 		/* Set training pattern 1 */
 		if (!intel_dp_set_link_train(intel_dp, DP,
@@ -1926,7 +1938,6 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 void
 intel_dp_complete_link_train(struct intel_dp *intel_dp)
 {
-	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	bool channel_eq = false;
 	int tries, cr_tries;
 	uint32_t DP = intel_dp->DP;
@@ -1936,8 +1947,6 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 	cr_tries = 0;
 	channel_eq = false;
 	for (;;) {
-		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
-		uint32_t    signal_levels;
 		uint8_t	    link_status[DP_LINK_STATUS_SIZE];
 
 		if (cr_tries > 5) {
@@ -1946,19 +1955,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 			break;
 		}
 
-		if (IS_HASWELL(dev)) {
-			signal_levels = intel_dp_signal_levels_hsw(intel_dp->train_set[0]);
-			DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels;
-		} else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
-			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
-			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
-		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
-			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
-			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
-		} else {
-			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
-			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
-		}
+		intel_dp_set_signal_levels(intel_dp, &DP);
 
 		/* channel eq pattern */
 		if (!intel_dp_set_link_train(intel_dp, DP,
-- 
cgit v1.2.3


From dfd07d72cf70cc8845006b698b55369f5d9c2733 Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Mon, 17 Dec 2012 11:21:38 +0100
Subject: drm/i915: clean up PIPECONF bpc #defines

Ilk+ somehow used #defines in near the PIPESTAT definitions, which
decently confused me. Earlier platforms called it BPP instead of
BPC. Clean this all up.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_reg.h      | 15 +++++----------
 drivers/gpu/drm/i915/intel_display.c | 28 ++++++++++++++--------------
 2 files changed, 19 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f83480403ccc..5b3020f836b9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2648,11 +2648,11 @@
 #define   PIPECONF_INTERLACED_DBL_ILK		(4 << 21) /* ilk/snb only */
 #define   PIPECONF_PFIT_PF_INTERLACED_DBL_ILK	(5 << 21) /* ilk/snb only */
 #define   PIPECONF_CXSR_DOWNCLOCK	(1<<16)
-#define   PIPECONF_BPP_MASK	(0x000000e0)
-#define   PIPECONF_BPP_8	(0<<5)
-#define   PIPECONF_BPP_10	(1<<5)
-#define   PIPECONF_BPP_6	(2<<5)
-#define   PIPECONF_BPP_12	(3<<5)
+#define   PIPECONF_BPC_MASK	(0x7 << 5)
+#define   PIPECONF_8BPC		(0<<5)
+#define   PIPECONF_10BPC	(1<<5)
+#define   PIPECONF_6BPC		(2<<5)
+#define   PIPECONF_12BPC	(3<<5)
 #define   PIPECONF_DITHER_EN	(1<<4)
 #define   PIPECONF_DITHER_TYPE_MASK (0x0000000c)
 #define   PIPECONF_DITHER_TYPE_SP (0<<2)
@@ -2696,11 +2696,6 @@
 #define   PIPE_START_VBLANK_INTERRUPT_STATUS	(1UL<<2) /* 965 or later */
 #define   PIPE_VBLANK_INTERRUPT_STATUS		(1UL<<1)
 #define   PIPE_OVERLAY_UPDATED_STATUS		(1UL<<0)
-#define   PIPE_BPC_MASK				(7 << 5) /* Ironlake */
-#define   PIPE_8BPC				(0 << 5)
-#define   PIPE_10BPC				(1 << 5)
-#define   PIPE_6BPC				(2 << 5)
-#define   PIPE_12BPC				(3 << 5)
 
 #define PIPESRC(pipe) _PIPE(pipe, _PIPEASRC, _PIPEBSRC)
 #define PIPECONF(tran) _TRANSCODER(tran, _PIPEACONF, _PIPEBCONF)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f02ec7b7d6eb..1bb68169aaf0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1669,8 +1669,8 @@ static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
 		 * make the BPC in transcoder be consistent with
 		 * that in pipeconf reg.
 		 */
-		val &= ~PIPE_BPC_MASK;
-		val |= pipeconf_val & PIPE_BPC_MASK;
+		val &= ~PIPECONF_BPC_MASK;
+		val |= pipeconf_val & PIPECONF_BPC_MASK;
 	}
 
 	val &= ~TRANS_INTERLACE_MASK;
@@ -2764,7 +2764,7 @@ static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
 	temp = I915_READ(reg);
 	temp &= ~((0x7 << 19) | (0x7 << 16));
 	temp |= (intel_crtc->fdi_lanes - 1) << 19;
-	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
 	I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
 
 	POSTING_READ(reg);
@@ -2845,7 +2845,7 @@ static void ironlake_fdi_disable(struct drm_crtc *crtc)
 	reg = FDI_RX_CTL(pipe);
 	temp = I915_READ(reg);
 	temp &= ~(0x7 << 16);
-	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
 	I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
 
 	POSTING_READ(reg);
@@ -2876,7 +2876,7 @@ static void ironlake_fdi_disable(struct drm_crtc *crtc)
 	}
 	/* BPC in FDI rx is consistent with that in PIPECONF */
 	temp &= ~(0x07 << 16);
-	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
 	I915_WRITE(reg, temp);
 
 	POSTING_READ(reg);
@@ -3115,7 +3115,7 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
 	if (HAS_PCH_CPT(dev) &&
 	    (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
 	     intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
-		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
+		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
 		reg = TRANS_DP_CTL(pipe);
 		temp = I915_READ(reg);
 		temp &= ~(TRANS_DP_PORT_SEL_MASK |
@@ -4686,10 +4686,10 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 	}
 
 	/* default to 8bpc */
-	pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
+	pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
 	if (is_dp) {
 		if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
-			pipeconf |= PIPECONF_BPP_6 |
+			pipeconf |= PIPECONF_6BPC |
 				    PIPECONF_DITHER_EN |
 				    PIPECONF_DITHER_TYPE_SP;
 		}
@@ -4697,7 +4697,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 
 	if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
 		if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
-			pipeconf |= PIPECONF_BPP_6 |
+			pipeconf |= PIPECONF_6BPC |
 					PIPECONF_ENABLE |
 					I965_PIPECONF_ACTIVE;
 		}
@@ -4907,19 +4907,19 @@ static void ironlake_set_pipeconf(struct drm_crtc *crtc,
 
 	val = I915_READ(PIPECONF(pipe));
 
-	val &= ~PIPE_BPC_MASK;
+	val &= ~PIPECONF_BPC_MASK;
 	switch (intel_crtc->bpp) {
 	case 18:
-		val |= PIPE_6BPC;
+		val |= PIPECONF_6BPC;
 		break;
 	case 24:
-		val |= PIPE_8BPC;
+		val |= PIPECONF_8BPC;
 		break;
 	case 30:
-		val |= PIPE_10BPC;
+		val |= PIPECONF_10BPC;
 		break;
 	case 36:
-		val |= PIPE_12BPC;
+		val |= PIPECONF_12BPC;
 		break;
 	default:
 		/* Case prevented by intel_choose_pipe_bpp_dither. */
-- 
cgit v1.2.3


From 4d7bb01162b768ca0f7e50aa3f31790d8d08402c Mon Sep 17 00:00:00 2001
From: Daniel Vetter
Date: Tue, 18 Dec 2012 15:24:37 +0100
Subject: drm/i915: fixup overlay stolen memory leak

We need to clean up the overlay first, before taking down the
stolen memory allocator.

This regression has been introducec in

commit 8040513870399f1cb032cb8bc805df5042fedcdf
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Nov 15 11:32:29 2012 +0000

    drm/i915: Allocate overlay registers from stolen memory

v2: Rework the patch a bit as suggested by Chris Wilson:
- move the overlay teardown up, into the modeset cleanup
- move the stolen mm takedown into i915_gem_cleanup_stolen

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_dma.c        | 3 ---
 drivers/gpu/drm/i915/i915_gem_stolen.c | 3 +++
 drivers/gpu/drm/i915/intel_display.c   | 2 ++
 3 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index a99c46d1e49a..272e500c920e 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1737,9 +1737,6 @@ int i915_driver_unload(struct drm_device *dev)
 		mutex_unlock(&dev->struct_mutex);
 		i915_gem_cleanup_aliasing_ppgtt(dev);
 		i915_gem_cleanup_stolen(dev);
-		drm_mm_takedown(&dev_priv->mm.stolen);
-
-		intel_cleanup_overlay(dev);
 
 		if (!I915_NEED_GFX_HWS(dev))
 			i915_free_hws(dev);
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index f817b0cac116..f21ae17e298f 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -173,7 +173,10 @@ void i915_gem_stolen_cleanup_compression(struct drm_device *dev)
 
 void i915_gem_cleanup_stolen(struct drm_device *dev)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
 	i915_gem_stolen_cleanup_compression(dev);
+	drm_mm_takedown(&dev_priv->mm.stolen);
 }
 
 int i915_gem_init_stolen(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 1bb68169aaf0..f7f4ef17cbe4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8869,6 +8869,8 @@ void intel_modeset_cleanup(struct drm_device *dev)
 	flush_scheduled_work();
 
 	drm_mode_config_cleanup(dev);
+
+	intel_cleanup_overlay(dev);
 }
 
 /*
-- 
cgit v1.2.3


From 7dbf9d6e0fd8d42398955de119ccba6c35813c88 Mon Sep 17 00:00:00 2001
From: Ben Widawsky
Date: Tue, 18 Dec 2012 10:31:22 -0800
Subject: drm/i915: BUG() if fences are used on unsupported platform

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem.c | 2 +-
 drivers/gpu/drm/i915/i915_irq.c | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index d15c86279d02..ad03dea210bd 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2649,7 +2649,7 @@ static void i915_gem_write_fence(struct drm_device *dev, int reg,
 	case 4: i965_write_fence_reg(dev, reg, obj); break;
 	case 3: i915_write_fence_reg(dev, reg, obj); break;
 	case 2: i830_write_fence_reg(dev, reg, obj); break;
-	default: break;
+	default: BUG();
 	}
 }
 
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 551f370657b7..6ba0573e7f16 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1106,6 +1106,8 @@ static void i915_gem_record_fences(struct drm_device *dev,
 			error->fence[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
 		break;
 
+	default:
+		BUG();
 	}
 }
 
-- 
cgit v1.2.3


From 8782e26c0cf3444a0d11400277bb44de710a0142 Mon Sep 17 00:00:00 2001
From: Ben Widawsky
Date: Tue, 18 Dec 2012 10:31:23 -0800
Subject: drm/i915: Bug on unsupported swizzled platforms

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ad03dea210bd..6685861cd176 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3897,8 +3897,10 @@ void i915_gem_init_swizzling(struct drm_device *dev)
 	I915_WRITE(TILECTL, I915_READ(TILECTL) | TILECTL_SWZCTL);
 	if (IS_GEN6(dev))
 		I915_WRITE(ARB_MODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_SNB));
-	else
+	else if (IS_GEN7(dev))
 		I915_WRITE(ARB_MODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_IVB));
+	else
+		BUG();
 }
 
 static bool
-- 
cgit v1.2.3


From 079a43f67f41274b137d8be1fb6093c8f6b6a762 Mon Sep 17 00:00:00 2001
From: Ben Widawsky
Date: Tue, 18 Dec 2012 10:31:24 -0800
Subject: drm/i915: Missed conversion to gtt_pte_t

commit f61c0609073133375ace61f74b0e4e7cf631406b
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Mon Oct 22 11:44:43 2012 -0700

    drm/i915: introduce gtt_pte_t

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem_gtt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index cc1be53a65f9..ea646b4c312a 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -282,7 +282,7 @@ void i915_gem_init_ppgtt(struct drm_device *dev)
 	uint32_t pd_offset;
 	struct intel_ring_buffer *ring;
 	struct i915_hw_ppgtt *ppgtt = dev_priv->mm.aliasing_ppgtt;
-	uint32_t __iomem *pd_addr;
+	gtt_pte_t __iomem *pd_addr;
 	uint32_t pd_entry;
 	int i;
 
@@ -290,7 +290,7 @@ void i915_gem_init_ppgtt(struct drm_device *dev)
 		return;
 
 
-	pd_addr = dev_priv->mm.gtt->gtt + ppgtt->pd_offset/sizeof(uint32_t);
+	pd_addr = dev_priv->mm.gtt->gtt + ppgtt->pd_offset/sizeof(gtt_pte_t);
 	for (i = 0; i < ppgtt->num_pd_entries; i++) {
 		dma_addr_t pt_addr;
 
-- 
cgit v1.2.3


From b70ec5bf439b35a18e702f88078d393261c3e3f2 Mon Sep 17 00:00:00 2001
From: Mika Kuoppala
Date: Wed, 19 Dec 2012 11:13:05 +0200
Subject: drm/i915: Introduce ring set_seqno

In preparation for setting per ring initial seqno values
add ring::set_seqno().

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 20 ++++++++++++++++++++
 drivers/gpu/drm/i915/intel_ringbuffer.h |  9 +++++++++
 2 files changed, 29 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 69bbe7bb9f6d..f536a9951ab3 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -727,6 +727,12 @@ ring_get_seqno(struct intel_ring_buffer *ring, bool lazy_coherency)
 	return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
 }
 
+static void
+ring_set_seqno(struct intel_ring_buffer *ring, u32 seqno)
+{
+	intel_write_status_page(ring, I915_GEM_HWS_INDEX, seqno);
+}
+
 static u32
 pc_render_get_seqno(struct intel_ring_buffer *ring, bool lazy_coherency)
 {
@@ -734,6 +740,13 @@ pc_render_get_seqno(struct intel_ring_buffer *ring, bool lazy_coherency)
 	return pc->cpu_page[0];
 }
 
+static void
+pc_render_set_seqno(struct intel_ring_buffer *ring, u32 seqno)
+{
+	struct pipe_control *pc = ring->private;
+	pc->cpu_page[0] = seqno;
+}
+
 static bool
 gen5_ring_get_irq(struct intel_ring_buffer *ring)
 {
@@ -1602,6 +1615,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 		ring->irq_put = gen6_ring_put_irq;
 		ring->irq_enable_mask = GT_USER_INTERRUPT;
 		ring->get_seqno = gen6_ring_get_seqno;
+		ring->set_seqno = ring_set_seqno;
 		ring->sync_to = gen6_ring_sync;
 		ring->semaphore_register[0] = MI_SEMAPHORE_SYNC_INVALID;
 		ring->semaphore_register[1] = MI_SEMAPHORE_SYNC_RV;
@@ -1612,6 +1626,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 		ring->add_request = pc_render_add_request;
 		ring->flush = gen4_render_ring_flush;
 		ring->get_seqno = pc_render_get_seqno;
+		ring->set_seqno = pc_render_set_seqno;
 		ring->irq_get = gen5_ring_get_irq;
 		ring->irq_put = gen5_ring_put_irq;
 		ring->irq_enable_mask = GT_USER_INTERRUPT | GT_PIPE_NOTIFY;
@@ -1622,6 +1637,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 		else
 			ring->flush = gen4_render_ring_flush;
 		ring->get_seqno = ring_get_seqno;
+		ring->set_seqno = ring_set_seqno;
 		if (IS_GEN2(dev)) {
 			ring->irq_get = i8xx_ring_get_irq;
 			ring->irq_put = i8xx_ring_put_irq;
@@ -1672,6 +1688,7 @@ int intel_render_ring_init_dri(struct drm_device *dev, u64 start, u32 size)
 	else
 		ring->flush = gen4_render_ring_flush;
 	ring->get_seqno = ring_get_seqno;
+	ring->set_seqno = ring_set_seqno;
 	if (IS_GEN2(dev)) {
 		ring->irq_get = i8xx_ring_get_irq;
 		ring->irq_put = i8xx_ring_put_irq;
@@ -1732,6 +1749,7 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
 		ring->flush = gen6_ring_flush;
 		ring->add_request = gen6_add_request;
 		ring->get_seqno = gen6_ring_get_seqno;
+		ring->set_seqno = ring_set_seqno;
 		ring->irq_enable_mask = GEN6_BSD_USER_INTERRUPT;
 		ring->irq_get = gen6_ring_get_irq;
 		ring->irq_put = gen6_ring_put_irq;
@@ -1747,6 +1765,7 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
 		ring->flush = bsd_ring_flush;
 		ring->add_request = i9xx_add_request;
 		ring->get_seqno = ring_get_seqno;
+		ring->set_seqno = ring_set_seqno;
 		if (IS_GEN5(dev)) {
 			ring->irq_enable_mask = GT_BSD_USER_INTERRUPT;
 			ring->irq_get = gen5_ring_get_irq;
@@ -1776,6 +1795,7 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
 	ring->flush = blt_ring_flush;
 	ring->add_request = gen6_add_request;
 	ring->get_seqno = gen6_ring_get_seqno;
+	ring->set_seqno = ring_set_seqno;
 	ring->irq_enable_mask = GEN6_BLITTER_USER_INTERRUPT;
 	ring->irq_get = gen6_ring_get_irq;
 	ring->irq_put = gen6_ring_put_irq;
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index b4a533e53fd1..4a7cd67742da 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -79,6 +79,8 @@ struct  intel_ring_buffer {
 	 */
 	u32		(*get_seqno)(struct intel_ring_buffer *ring,
 				     bool lazy_coherency);
+	void		(*set_seqno)(struct intel_ring_buffer *ring,
+				     u32 seqno);
 	int		(*dispatch_execbuffer)(struct intel_ring_buffer *ring,
 					       u32 offset, u32 length,
 					       unsigned flags);
@@ -166,6 +168,13 @@ intel_read_status_page(struct intel_ring_buffer *ring,
 	return ring->status_page.page_addr[reg];
 }
 
+static inline void
+intel_write_status_page(struct intel_ring_buffer *ring,
+			int reg, u32 value)
+{
+	ring->status_page.page_addr[reg] = value;
+}
+
 /**
  * Reads a dword out of the status page, which is written to from the command
  * queue by automatic updates, MI_REPORT_HEAD, MI_STORE_DATA_INDEX, or
-- 
cgit v1.2.3


From f7e98ad4d4a8afa043126a6f24d0a154a684e081 Mon Sep 17 00:00:00 2001
From: Mika Kuoppala
Date: Wed, 19 Dec 2012 11:13:06 +0200
Subject: drm/i915: Initialize hardware semaphore state on ring init

Hardware status page needs to have proper seqno set
as our initial seqno can be arbitrary. If initial seqno is close
to wrap boundary on init and i915_seqno_passed() (31bit space)
refers to hw status page which contains zero, errorneous result
will be returned.

v2: clear mboxes and set hws page directly instead of going
through rings. Suggested by Chris Wilson.

v3: hws needs to be updated for all gens. Noticed by Chris
Wilson.

References: https://bugs.freedesktop.org/show_bug.cgi?id=58230
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem.c         |  8 +++-----
 drivers/gpu/drm/i915/intel_ringbuffer.c | 24 +++++++++---------------
 drivers/gpu/drm/i915/intel_ringbuffer.h |  2 +-
 3 files changed, 13 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 6685861cd176..51282b2c4943 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1954,9 +1954,7 @@ i915_gem_handle_seqno_wrap(struct drm_device *dev)
 
 	/* Finally reset hw state */
 	for_each_ring(ring, dev_priv, i) {
-		ret = intel_ring_handle_seqno_wrap(ring);
-		if (ret)
-			return ret;
+		intel_ring_init_seqno(ring, 0);
 
 		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
 			ring->sync_seqno[j] = 0;
@@ -3935,6 +3933,8 @@ i915_gem_init_hw(struct drm_device *dev)
 
 	i915_gem_init_swizzling(dev);
 
+	dev_priv->next_seqno = dev_priv->last_seqno = (u32)~0 - 0x1000;
+
 	ret = intel_init_render_ring_buffer(dev);
 	if (ret)
 		return ret;
@@ -3951,8 +3951,6 @@ i915_gem_init_hw(struct drm_device *dev)
 			goto cleanup_bsd_ring;
 	}
 
-	dev_priv->next_seqno = (u32)-1 - 0x1000;
-
 	/*
 	 * XXX: There was some w/a described somewhere suggesting loading
 	 * contexts before PPGTT.
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index f536a9951ab3..2bd074ad6f54 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1184,6 +1184,8 @@ static int intel_init_ring_buffer(struct drm_device *dev,
 	if (IS_I830(ring->dev) || IS_845G(ring->dev))
 		ring->effective_size -= 128;
 
+	intel_ring_init_seqno(ring, dev_priv->last_seqno);
+
 	return 0;
 
 err_unmap:
@@ -1431,26 +1433,18 @@ int intel_ring_begin(struct intel_ring_buffer *ring,
 	return __intel_ring_begin(ring, num_dwords * sizeof(uint32_t));
 }
 
-int intel_ring_handle_seqno_wrap(struct intel_ring_buffer *ring)
+void intel_ring_init_seqno(struct intel_ring_buffer *ring, u32 seqno)
 {
-	int ret;
+	struct drm_i915_private *dev_priv = ring->dev->dev_private;
 
 	BUG_ON(ring->outstanding_lazy_request);
 
-	if (INTEL_INFO(ring->dev)->gen < 6)
-		return 0;
-
-	ret = __intel_ring_begin(ring, 6 * sizeof(uint32_t));
-	if (ret)
-		return ret;
-
-	/* Leaving a stale, pre-wrap seqno behind in the mboxes will result in
-	 * post-wrap semaphore waits completing immediately. Clear them. */
-	update_mboxes(ring, ring->signal_mbox[0]);
-	update_mboxes(ring, ring->signal_mbox[1]);
-	intel_ring_advance(ring);
+	if (INTEL_INFO(ring->dev)->gen >= 6) {
+		I915_WRITE(RING_SYNC_0(ring->mmio_base), 0);
+		I915_WRITE(RING_SYNC_1(ring->mmio_base), 0);
+	}
 
-	return 0;
+	ring->set_seqno(ring, seqno);
 }
 
 void intel_ring_advance(struct intel_ring_buffer *ring)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 4a7cd67742da..e7b9a6aac955 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -205,7 +205,7 @@ static inline void intel_ring_emit(struct intel_ring_buffer *ring,
 }
 void intel_ring_advance(struct intel_ring_buffer *ring);
 int __must_check intel_ring_idle(struct intel_ring_buffer *ring);
-int __must_check intel_ring_handle_seqno_wrap(struct intel_ring_buffer *ring);
+void intel_ring_init_seqno(struct intel_ring_buffer *ring, u32 seqno);
 int intel_ring_flush_all_caches(struct intel_ring_buffer *ring);
 int intel_ring_invalidate_all_caches(struct intel_ring_buffer *ring);
 
-- 
cgit v1.2.3


From ba1a7067c00f4cbdd99b00a570ff072639ae59f2 Mon Sep 17 00:00:00 2001
From: Mika Kuoppala
Date: Wed, 19 Dec 2012 11:13:07 +0200
Subject: drm/i915: Always clear semaphore mboxes on seqno wrap

In preparation for setting the seqno to arbitrary value on init or
through debugfs. We need to always clear the semaphores and set the
hws page seqno index by calling intel_ring_init_seqno().

v2: rewrote the commit message as suggested by Chris Wilson.

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 51282b2c4943..bb38bca02559 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1932,18 +1932,6 @@ i915_gem_handle_seqno_wrap(struct drm_device *dev)
 	struct intel_ring_buffer *ring;
 	int ret, i, j;
 
-	/* The hardware uses various monotonic 32-bit counters, if we
-	 * detect that they will wraparound we need to idle the GPU
-	 * and reset those counters.
-	 */
-	ret = 0;
-	for_each_ring(ring, dev_priv, i) {
-		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
-			ret |= ring->sync_seqno[j] != 0;
-	}
-	if (ret == 0)
-		return ret;
-
 	/* Carefully retire all requests without writing to the rings */
 	for_each_ring(ring, dev_priv, i) {
 		ret = intel_ring_idle(ring);
-- 
cgit v1.2.3


From fca26bb45375266d9d9b8b4b57fee905ac38fe3c Mon Sep 17 00:00:00 2001
From: Mika Kuoppala
Date: Wed, 19 Dec 2012 11:13:08 +0200
Subject: drm/i915: Introduce i915_gem_set_seqno()

This function can be used to set the driver's next_seqno
to arbitrary value.

i915_gem_set_seqno() will idle the gpu, retire outstanding
requests, clear the semaphore mailboxes and set the hardware
status page's seqno index.

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h |  4 ++--
 drivers/gpu/drm/i915/i915_gem.c | 32 +++++++++++++++++++++++++++++---
 2 files changed, 31 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 514aee895ecb..b0faa9149a1a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1479,8 +1479,8 @@ i915_seqno_passed(uint32_t seq1, uint32_t seq2)
 	return (int32_t)(seq1 - seq2) >= 0;
 }
 
-extern int i915_gem_get_seqno(struct drm_device *dev, u32 *seqno);
-
+int __must_check i915_gem_get_seqno(struct drm_device *dev, u32 *seqno);
+int __must_check i915_gem_set_seqno(struct drm_device *dev, u32 seqno);
 int __must_check i915_gem_object_get_fence(struct drm_i915_gem_object *obj);
 int __must_check i915_gem_object_put_fence(struct drm_i915_gem_object *obj);
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index bb38bca02559..23b883a135db 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1926,7 +1926,7 @@ i915_gem_object_move_to_inactive(struct drm_i915_gem_object *obj)
 }
 
 static int
-i915_gem_handle_seqno_wrap(struct drm_device *dev)
+i915_gem_init_seqno(struct drm_device *dev, u32 seqno)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_ring_buffer *ring;
@@ -1942,7 +1942,7 @@ i915_gem_handle_seqno_wrap(struct drm_device *dev)
 
 	/* Finally reset hw state */
 	for_each_ring(ring, dev_priv, i) {
-		intel_ring_init_seqno(ring, 0);
+		intel_ring_init_seqno(ring, seqno);
 
 		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
 			ring->sync_seqno[j] = 0;
@@ -1951,6 +1951,32 @@ i915_gem_handle_seqno_wrap(struct drm_device *dev)
 	return 0;
 }
 
+int i915_gem_set_seqno(struct drm_device *dev, u32 seqno)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	if (seqno == 0)
+		return -EINVAL;
+
+	/* HWS page needs to be set less than what we
+	 * will inject to ring
+	 */
+	ret = i915_gem_init_seqno(dev, seqno - 1);
+	if (ret)
+		return ret;
+
+	/* Carefully set the last_seqno value so that wrap
+	 * detection still works
+	 */
+	dev_priv->next_seqno = seqno;
+	dev_priv->last_seqno = seqno - 1;
+	if (dev_priv->last_seqno == 0)
+		dev_priv->last_seqno--;
+
+	return 0;
+}
+
 int
 i915_gem_get_seqno(struct drm_device *dev, u32 *seqno)
 {
@@ -1958,7 +1984,7 @@ i915_gem_get_seqno(struct drm_device *dev, u32 *seqno)
 
 	/* reserve 0 for non-seqno */
 	if (dev_priv->next_seqno == 0) {
-		int ret = i915_gem_handle_seqno_wrap(dev);
+		int ret = i915_gem_init_seqno(dev, 0);
 		if (ret)
 			return ret;
 
-- 
cgit v1.2.3


From e94fbaa8750a8f20c14718633764fba2e6755825 Mon Sep 17 00:00:00 2001
From: Mika Kuoppala
Date: Wed, 19 Dec 2012 11:13:09 +0200
Subject: drm/i915: Make next_seqno debugs entry to use i915_gem_set_seqno

This debugs entry can be used to set arbitrary value to next_seqno.
Use i915_gem_set_seqno instead of poking next_seqno.

v2: nasty details of next_seqno and last_seqno handling
moved inside i915_gem_set_seqno as suggested by Chris Wilson.

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 7047c4a9fb9e..882a7352b9b9 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -878,7 +878,6 @@ i915_next_seqno_write(struct file *filp,
 		      loff_t *ppos)
 {
 	struct drm_device *dev = filp->private_data;
-	drm_i915_private_t *dev_priv = dev->dev_private;
 	char buf[20];
 	u32 val = 1;
 	int ret;
@@ -896,19 +895,11 @@ i915_next_seqno_write(struct file *filp,
 			return ret;
 	}
 
-	if (val == 0)
-		return -EINVAL;
-
 	ret = mutex_lock_interruptible(&dev->struct_mutex);
 	if (ret)
 		return ret;
 
-	if (i915_seqno_passed(val, dev_priv->next_seqno)) {
-		dev_priv->next_seqno = val;
-		DRM_DEBUG_DRIVER("Advancing seqno to %u\n", val);
-	} else {
-		ret = -EINVAL;
-	}
+	ret = i915_gem_set_seqno(dev, val);
 
 	mutex_unlock(&dev->struct_mutex);
 
-- 
cgit v1.2.3


From d7e5008f7c2077d856e40a3af746f1a47028b5f2 Mon Sep 17 00:00:00 2001
From: Ben Widawsky
Date: Tue, 18 Dec 2012 10:31:25 -0800
Subject: drm/i915: Move even more gtt code to i915_gem_gtt

This really should have been part of the kill agp series.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h     |  7 ++---
 drivers/gpu/drm/i915/i915_gem.c     | 51 ++------------------------------
 drivers/gpu/drm/i915/i915_gem_gtt.c | 59 ++++++++++++++++++++++++++++++++++---
 3 files changed, 61 insertions(+), 56 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index b0faa9149a1a..15799e783b7a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1587,10 +1587,9 @@ void i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj,
 				enum i915_cache_level cache_level);
 void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj);
 void i915_gem_gtt_finish_object(struct drm_i915_gem_object *obj);
-void i915_gem_init_global_gtt(struct drm_device *dev,
-			      unsigned long start,
-			      unsigned long mappable_end,
-			      unsigned long end);
+void i915_gem_init_global_gtt(struct drm_device *dev);
+void i915_gem_setup_global_gtt(struct drm_device *dev, unsigned long start,
+			       unsigned long mappable_end, unsigned long end);
 int i915_gem_gtt_init(struct drm_device *dev);
 void i915_gem_gtt_fini(struct drm_device *dev);
 static inline void i915_gem_chipset_flush(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 23b883a135db..ad98db5d22ea 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -163,8 +163,8 @@ i915_gem_init_ioctl(struct drm_device *dev, void *data,
 		return -ENODEV;
 
 	mutex_lock(&dev->struct_mutex);
-	i915_gem_init_global_gtt(dev, args->gtt_start,
-				 args->gtt_end, args->gtt_end);
+	i915_gem_setup_global_gtt(dev, args->gtt_start, args->gtt_end,
+				  args->gtt_end);
 	mutex_unlock(&dev->struct_mutex);
 
 	return 0;
@@ -3981,58 +3981,13 @@ cleanup_render_ring:
 	return ret;
 }
 
-static bool
-intel_enable_ppgtt(struct drm_device *dev)
-{
-	if (i915_enable_ppgtt >= 0)
-		return i915_enable_ppgtt;
-
-#ifdef CONFIG_INTEL_IOMMU
-	/* Disable ppgtt on SNB if VT-d is on. */
-	if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
-		return false;
-#endif
-
-	return true;
-}
-
 int i915_gem_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long gtt_size, mappable_size;
 	int ret;
 
-	gtt_size = dev_priv->mm.gtt->gtt_total_entries << PAGE_SHIFT;
-	mappable_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
-
 	mutex_lock(&dev->struct_mutex);
-	if (intel_enable_ppgtt(dev) && HAS_ALIASING_PPGTT(dev)) {
-		/* PPGTT pdes are stolen from global gtt ptes, so shrink the
-		 * aperture accordingly when using aliasing ppgtt. */
-		gtt_size -= I915_PPGTT_PD_ENTRIES*PAGE_SIZE;
-
-		i915_gem_init_global_gtt(dev, 0, mappable_size, gtt_size);
-
-		ret = i915_gem_init_aliasing_ppgtt(dev);
-		if (ret) {
-			mutex_unlock(&dev->struct_mutex);
-			return ret;
-		}
-	} else {
-		/* Let GEM Manage all of the aperture.
-		 *
-		 * However, leave one page at the end still bound to the scratch
-		 * page.  There are a number of places where the hardware
-		 * apparently prefetches past the end of the object, and we've
-		 * seen multiple hangs with the GPU head pointer stuck in a
-		 * batchbuffer bound at the last page of the aperture.  One page
-		 * should be enough to keep any prefetching inside of the
-		 * aperture.
-		 */
-		i915_gem_init_global_gtt(dev, 0, mappable_size,
-					 gtt_size);
-	}
-
+	i915_gem_init_global_gtt(dev);
 	ret = i915_gem_init_hw(dev);
 	mutex_unlock(&dev->struct_mutex);
 	if (ret) {
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index ea646b4c312a..61b3e728be34 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -525,10 +525,10 @@ static void i915_gtt_color_adjust(struct drm_mm_node *node,
 	}
 }
 
-void i915_gem_init_global_gtt(struct drm_device *dev,
-			      unsigned long start,
-			      unsigned long mappable_end,
-			      unsigned long end)
+void i915_gem_setup_global_gtt(struct drm_device *dev,
+			       unsigned long start,
+			       unsigned long mappable_end,
+			       unsigned long end)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_mm_node *entry;
@@ -573,6 +573,57 @@ void i915_gem_init_global_gtt(struct drm_device *dev,
 	i915_ggtt_clear_range(dev, end / PAGE_SIZE - 1, 1);
 }
 
+static bool
+intel_enable_ppgtt(struct drm_device *dev)
+{
+	if (i915_enable_ppgtt >= 0)
+		return i915_enable_ppgtt;
+
+#ifdef CONFIG_INTEL_IOMMU
+	/* Disable ppgtt on SNB if VT-d is on. */
+	if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
+		return false;
+#endif
+
+	return true;
+}
+
+void i915_gem_init_global_gtt(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long gtt_size, mappable_size;
+	int ret;
+
+	gtt_size = dev_priv->mm.gtt->gtt_total_entries << PAGE_SHIFT;
+	mappable_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
+
+	if (intel_enable_ppgtt(dev) && HAS_ALIASING_PPGTT(dev)) {
+		/* PPGTT pdes are stolen from global gtt ptes, so shrink the
+		 * aperture accordingly when using aliasing ppgtt. */
+		gtt_size -= I915_PPGTT_PD_ENTRIES*PAGE_SIZE;
+
+		i915_gem_setup_global_gtt(dev, 0, mappable_size, gtt_size);
+
+		ret = i915_gem_init_aliasing_ppgtt(dev);
+		if (ret) {
+			mutex_unlock(&dev->struct_mutex);
+			return;
+		}
+	} else {
+		/* Let GEM Manage all of the aperture.
+		 *
+		 * However, leave one page at the end still bound to the scratch
+		 * page.  There are a number of places where the hardware
+		 * apparently prefetches past the end of the object, and we've
+		 * seen multiple hangs with the GPU head pointer stuck in a
+		 * batchbuffer bound at the last page of the aperture.  One page
+		 * should be enough to keep any prefetching inside of the
+		 * aperture.
+		 */
+		i915_gem_setup_global_gtt(dev, 0, mappable_size, gtt_size);
+	}
+}
+
 static int setup_scratch_page(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-- 
cgit v1.2.3


From 06e5598fce5ce89fe8bf081398296e5b08d993dd Mon Sep 17 00:00:00 2001
From: Ben Widawsky
Date: Tue, 18 Dec 2012 10:31:26 -0800
Subject: drm/i915: Move GSM mapping into dev_priv

This removes an unused field from the AGP structure and moves it into
the dev_priv structure (with a slightly better name). This builds upon
the kill-agp series already merged.

GSM is a well defined term in the bspec:
GSM: Graphics Stolen Memory

GTT stolen space is defined for storage of the GFX GTT entries in
physical memory. IA can not access GSM directly , it can only access via
GTTMMADR. GT can access GSM directly or through GTTMMADR.

This is not the entire stolen space.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/char/agp/intel-gtt.c        |  1 -
 drivers/gpu/drm/i915/i915_drv.h     |  3 +++
 drivers/gpu/drm/i915/i915_gem_gtt.c | 14 +++++++-------
 include/drm/intel-gtt.h             |  2 --
 4 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index dbd901e94ea6..c8d9dcb15db0 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -602,7 +602,6 @@ static int intel_gtt_init(void)
 		iounmap(intel_private.registers);
 		return -ENOMEM;
 	}
-	intel_private.base.gtt = intel_private.gtt;
 
 	global_cache_flush();   /* FIXME: ? */
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 15799e783b7a..ae88d87be951 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -800,6 +800,9 @@ typedef struct drm_i915_private {
 		unsigned long gtt_end;
 		unsigned long stolen_base; /* limited to low memory (32-bit) */
 
+		/** "Graphics Stolen Memory" holds the global PTEs */
+		uint32_t __iomem *gsm;
+
 		struct io_mapping *gtt_mapping;
 		phys_addr_t gtt_base_addr;
 		int gtt_mtrr;
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 61b3e728be34..912389e38a7d 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -290,7 +290,7 @@ void i915_gem_init_ppgtt(struct drm_device *dev)
 		return;
 
 
-	pd_addr = dev_priv->mm.gtt->gtt + ppgtt->pd_offset/sizeof(gtt_pte_t);
+	pd_addr = dev_priv->mm.gsm + ppgtt->pd_offset/sizeof(gtt_pte_t);
 	for (i = 0; i < ppgtt->num_pd_entries; i++) {
 		dma_addr_t pt_addr;
 
@@ -367,7 +367,7 @@ static void i915_ggtt_clear_range(struct drm_device *dev,
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	gtt_pte_t scratch_pte;
-	gtt_pte_t __iomem *gtt_base = dev_priv->mm.gtt->gtt + first_entry;
+	gtt_pte_t __iomem *gtt_base = (gtt_pte_t __iomem *) dev_priv->mm.gsm + first_entry;
 	const int max_entries = dev_priv->mm.gtt->gtt_total_entries - first_entry;
 	int i;
 
@@ -432,7 +432,7 @@ static void gen6_ggtt_bind_object(struct drm_i915_gem_object *obj,
 	struct scatterlist *sg = st->sgl;
 	const int first_entry = obj->gtt_space->start >> PAGE_SHIFT;
 	const int max_entries = dev_priv->mm.gtt->gtt_total_entries - first_entry;
-	gtt_pte_t __iomem *gtt_entries = dev_priv->mm.gtt->gtt + first_entry;
+	gtt_pte_t __iomem *gtt_entries = dev_priv->mm.gsm + first_entry;
 	int unused, i = 0;
 	unsigned int len, m = 0;
 	dma_addr_t addr;
@@ -747,9 +747,9 @@ int i915_gem_gtt_init(struct drm_device *dev)
 		goto err_out;
 	}
 
-	dev_priv->mm.gtt->gtt = ioremap_wc(gtt_bus_addr,
-					   dev_priv->mm.gtt->gtt_total_entries * sizeof(gtt_pte_t));
-	if (!dev_priv->mm.gtt->gtt) {
+	dev_priv->mm.gsm = ioremap_wc(gtt_bus_addr,
+				      dev_priv->mm.gtt->gtt_total_entries * sizeof(gtt_pte_t));
+	if (!dev_priv->mm.gsm) {
 		DRM_ERROR("Failed to map the gtt page table\n");
 		teardown_scratch_page(dev);
 		ret = -ENOMEM;
@@ -773,7 +773,7 @@ err_out:
 void i915_gem_gtt_fini(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	iounmap(dev_priv->mm.gtt->gtt);
+	iounmap(dev_priv->mm.gsm);
 	teardown_scratch_page(dev);
 	if (INTEL_INFO(dev)->gen < 6)
 		intel_gmch_remove();
diff --git a/include/drm/intel-gtt.h b/include/drm/intel-gtt.h
index 6eb76a1f11ab..3e3a166a2690 100644
--- a/include/drm/intel-gtt.h
+++ b/include/drm/intel-gtt.h
@@ -18,8 +18,6 @@ struct intel_gtt {
 	/* Share the scratch page dma with ppgtts. */
 	dma_addr_t scratch_page_dma;
 	struct page *scratch_page;
-	/* for ppgtt PDE access */
-	u32 __iomem *gtt;
 	/* needed for ioremap in drm/i915 */
 	phys_addr_t gma_bus_addr;
 } *intel_gtt_get(void);
-- 
cgit v1.2.3


From 1c45140d3da0c98fa7eda2cd10f9805232a5e9ac Mon Sep 17 00:00:00 2001
From: Ben Widawsky
Date: Tue, 18 Dec 2012 10:31:27 -0800
Subject: drm/i915: Make GSM void

The iomapping of the register region has historically been a uint32_t
for the obvious reason that our PTE size was always 4b. In the future
however, we cannot make this assumption.

By making the type void, it makes the upcoming pointer math we will do
much easier, and hopefully gives the compiler opportunities to warn us
when we do stupid things.

v2: Cast to __iomem, caught by Ville

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Fixup __iomem issue for real.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h     | 2 +-
 drivers/gpu/drm/i915/i915_gem_gtt.c | 5 +++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ae88d87be951..d2b93a4a3d71 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -801,7 +801,7 @@ typedef struct drm_i915_private {
 		unsigned long stolen_base; /* limited to low memory (32-bit) */
 
 		/** "Graphics Stolen Memory" holds the global PTEs */
-		uint32_t __iomem *gsm;
+		void __iomem *gsm;
 
 		struct io_mapping *gtt_mapping;
 		phys_addr_t gtt_base_addr;
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 912389e38a7d..eac2cec71652 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -290,7 +290,7 @@ void i915_gem_init_ppgtt(struct drm_device *dev)
 		return;
 
 
-	pd_addr = dev_priv->mm.gsm + ppgtt->pd_offset/sizeof(gtt_pte_t);
+	pd_addr = (gtt_pte_t __iomem*)dev_priv->mm.gsm + ppgtt->pd_offset/sizeof(gtt_pte_t);
 	for (i = 0; i < ppgtt->num_pd_entries; i++) {
 		dma_addr_t pt_addr;
 
@@ -432,7 +432,8 @@ static void gen6_ggtt_bind_object(struct drm_i915_gem_object *obj,
 	struct scatterlist *sg = st->sgl;
 	const int first_entry = obj->gtt_space->start >> PAGE_SHIFT;
 	const int max_entries = dev_priv->mm.gtt->gtt_total_entries - first_entry;
-	gtt_pte_t __iomem *gtt_entries = dev_priv->mm.gsm + first_entry;
+	gtt_pte_t __iomem *gtt_entries =
+		(gtt_pte_t __iomem *)dev_priv->mm.gsm + first_entry;
 	int unused, i = 0;
 	unsigned int len, m = 0;
 	dma_addr_t addr;
-- 
cgit v1.2.3


From c0c36b941b6f0be6ac74f340040cbb29d6a0b06c Mon Sep 17 00:00:00 2001
From: Chris Wilson
Date: Wed, 19 Dec 2012 16:08:43 +0000
Subject: drm/i915: Return the real error code from intel_set_mode()

Note: This patch also adds a little helper intel_crtc_restore_mode for
the common case where we do a full modeset but with the same
parameters, e.g. to undo bios damage or update a property.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Added note.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 56 ++++++++++++++++++------------------
 drivers/gpu/drm/i915/intel_dp.c      |  7 ++---
 drivers/gpu/drm/i915/intel_drv.h     |  5 ++--
 drivers/gpu/drm/i915/intel_hdmi.c    |  7 ++---
 drivers/gpu/drm/i915/intel_lvds.c    |  3 +-
 drivers/gpu/drm/i915/intel_sdvo.c    |  7 ++---
 drivers/gpu/drm/i915/intel_tv.c      |  3 +-
 7 files changed, 39 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f7f4ef17cbe4..1464e472ce44 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6313,7 +6313,7 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector,
 		return false;
 	}
 
-	if (!intel_set_mode(crtc, mode, 0, 0, fb)) {
+	if (intel_set_mode(crtc, mode, 0, 0, fb)) {
 		DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
 		if (old->release_fb)
 			old->release_fb->funcs->destroy(old->release_fb);
@@ -7426,22 +7426,20 @@ intel_modeset_check_state(struct drm_device *dev)
 	}
 }
 
-bool intel_set_mode(struct drm_crtc *crtc,
-		    struct drm_display_mode *mode,
-		    int x, int y, struct drm_framebuffer *fb)
+int intel_set_mode(struct drm_crtc *crtc,
+		   struct drm_display_mode *mode,
+		   int x, int y, struct drm_framebuffer *fb)
 {
 	struct drm_device *dev = crtc->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_display_mode *adjusted_mode, *saved_mode, *saved_hwmode;
 	struct intel_crtc *intel_crtc;
 	unsigned disable_pipes, prepare_pipes, modeset_pipes;
-	bool ret = true;
+	int ret = 0;
 
 	saved_mode = kmalloc(2 * sizeof(*saved_mode), GFP_KERNEL);
-	if (!saved_mode) {
-		DRM_ERROR("i915: Could not allocate saved display mode.\n");
-		return false;
-	}
+	if (!saved_mode)
+		return -ENOMEM;
 	saved_hwmode = saved_mode + 1;
 
 	intel_modeset_affected_pipes(crtc, &modeset_pipes,
@@ -7465,7 +7463,7 @@ bool intel_set_mode(struct drm_crtc *crtc,
 	if (modeset_pipes) {
 		adjusted_mode = intel_modeset_adjusted_mode(crtc, mode);
 		if (IS_ERR(adjusted_mode)) {
-			ret = false;
+			ret = PTR_ERR(adjusted_mode);
 			goto out;
 		}
 	}
@@ -7492,11 +7490,11 @@ bool intel_set_mode(struct drm_crtc *crtc,
 	 * on the DPLL.
 	 */
 	for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
-		ret = !intel_crtc_mode_set(&intel_crtc->base,
-					   mode, adjusted_mode,
-					   x, y, fb);
-		if (!ret)
-		    goto done;
+		ret = intel_crtc_mode_set(&intel_crtc->base,
+					  mode, adjusted_mode,
+					  x, y, fb);
+		if (ret)
+			goto done;
 	}
 
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
@@ -7517,7 +7515,7 @@ bool intel_set_mode(struct drm_crtc *crtc,
 	/* FIXME: add subpixel order */
 done:
 	drm_mode_destroy(dev, adjusted_mode);
-	if (!ret && crtc->enabled) {
+	if (ret && crtc->enabled) {
 		crtc->hwmode = *saved_hwmode;
 		crtc->mode = *saved_mode;
 	} else {
@@ -7529,6 +7527,11 @@ out:
 	return ret;
 }
 
+void intel_crtc_restore_mode(struct drm_crtc *crtc)
+{
+	intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->fb);
+}
+
 #undef for_each_intel_crtc_masked
 
 static void intel_set_config_free(struct intel_set_config *config)
@@ -7798,11 +7801,11 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 			drm_mode_debug_printmodeline(set->mode);
 		}
 
-		if (!intel_set_mode(set->crtc, set->mode,
-				    set->x, set->y, set->fb)) {
-			DRM_ERROR("failed to set mode on [CRTC:%d]\n",
-				  set->crtc->base.id);
-			ret = -EINVAL;
+		ret = intel_set_mode(set->crtc, set->mode,
+				     set->x, set->y, set->fb);
+		if (ret) {
+			DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n",
+				  set->crtc->base.id, ret);
 			goto fail;
 		}
 	} else if (config->fb_changed) {
@@ -7819,8 +7822,8 @@ fail:
 
 	/* Try to restore the config */
 	if (config->mode_changed &&
-	    !intel_set_mode(save_set.crtc, save_set.mode,
-			    save_set.x, save_set.y, save_set.fb))
+	    intel_set_mode(save_set.crtc, save_set.mode,
+			   save_set.x, save_set.y, save_set.fb))
 		DRM_ERROR("failed to restore config after modeset failure\n");
 
 out_config:
@@ -8804,11 +8807,8 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 	}
 
 	if (force_restore) {
-		for_each_pipe(pipe) {
-			crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
-			intel_set_mode(&crtc->base, &crtc->base.mode,
-				       crtc->base.x, crtc->base.y, crtc->base.fb);
-		}
+		for_each_pipe(pipe)
+			intel_crtc_restore_mode(dev_priv->pipe_to_crtc_mapping[pipe]);
 	} else {
 		intel_modeset_update_staged_output_state(dev);
 	}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 2d3b26832397..1dd89d5fe511 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2483,11 +2483,8 @@ intel_dp_set_property(struct drm_connector *connector,
 	return -EINVAL;
 
 done:
-	if (intel_encoder->base.crtc) {
-		struct drm_crtc *crtc = intel_encoder->base.crtc;
-		intel_set_mode(crtc, &crtc->mode,
-			       crtc->x, crtc->y, crtc->fb);
-	}
+	if (intel_encoder->base.crtc)
+		intel_crtc_restore_mode(intel_encoder->base.crtc);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 53d4c8fec2a0..116580b623dd 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -501,9 +501,10 @@ struct intel_set_config {
 	bool mode_changed;
 };
 
-extern bool intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
-			   int x, int y, struct drm_framebuffer *old_fb);
+extern int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
+			  int x, int y, struct drm_framebuffer *old_fb);
 extern void intel_modeset_disable(struct drm_device *dev);
+extern void intel_crtc_restore_mode(struct drm_crtc *crtc);
 extern void intel_crtc_load_lut(struct drm_crtc *crtc);
 extern void intel_crtc_update_dpms(struct drm_crtc *crtc);
 extern void intel_encoder_noop(struct drm_encoder *encoder);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 9f834d324cfd..6387f9b0df99 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -917,11 +917,8 @@ intel_hdmi_set_property(struct drm_connector *connector,
 	return -EINVAL;
 
 done:
-	if (intel_dig_port->base.base.crtc) {
-		struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
-		intel_set_mode(crtc, &crtc->mode,
-			       crtc->x, crtc->y, crtc->fb);
-	}
+	if (intel_dig_port->base.base.crtc)
+		intel_crtc_restore_mode(intel_dig_port->base.base.crtc);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 778106961e80..8c61876dbe95 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -646,8 +646,7 @@ static int intel_lvds_set_property(struct drm_connector *connector,
 			 * If the CRTC is enabled, the display will be changed
 			 * according to the new panel fitting mode.
 			 */
-			intel_set_mode(crtc, &crtc->mode,
-				       crtc->x, crtc->y, crtc->fb);
+			intel_crtc_restore_mode(crtc);
 		}
 	}
 
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 0e03985b0fe4..ea2e79f63d2b 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1997,11 +1997,8 @@ set_value:
 
 
 done:
-	if (intel_sdvo->base.base.crtc) {
-		struct drm_crtc *crtc = intel_sdvo->base.base.crtc;
-		intel_set_mode(crtc, &crtc->mode,
-			       crtc->x, crtc->y, crtc->fb);
-	}
+	if (intel_sdvo->base.base.crtc)
+		intel_crtc_restore_mode(intel_sdvo->base.base.crtc);
 
 	return 0;
 #undef CHECK_PROPERTY
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index ea93520c1278..984a113c5d13 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1479,8 +1479,7 @@ intel_tv_set_property(struct drm_connector *connector, struct drm_property *prop
 	}
 
 	if (changed && crtc)
-		intel_set_mode(crtc, &crtc->mode,
-			       crtc->x, crtc->y, crtc->fb);
+		intel_crtc_restore_mode(crtc);
 out:
 	return ret;
 }
-- 
cgit v1.2.3