From c887bdc4fb254a871e6180e18203152c548419f1 Mon Sep 17 00:00:00 2001 From: Wan Jiabing Date: Mon, 28 Mar 2022 15:39:31 +0800 Subject: clk: sunxi-ng: fix not NULL terminated coccicheck error Fix the following coccicheck error: ./drivers/clk/sunxi-ng/ccu-sun6i-rtc.c:348:1-2: sun6i_rtc_ccu_match is not NULL terminated at line 348 Fixes: d91612d7f01a ("clk: sunxi-ng: Add support for the sun6i RTC clocks") Signed-off-by: Wan Jiabing Reviewed-by: Jernej Skrabec Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220328073931.36544-1-wanjiabing@vivo.com --- drivers/clk/sunxi-ng/ccu-sun6i-rtc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c index 8a10bade7e0d..ffb72d9a9c36 100644 --- a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c +++ b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c @@ -346,6 +346,7 @@ static const struct of_device_id sun6i_rtc_ccu_match[] = { .compatible = "allwinner,sun50i-r329-rtc", .data = &sun50i_r329_rtc_ccu_data, }, + {}, }; int sun6i_rtc_ccu_probe(struct device *dev, void __iomem *reg) -- cgit v1.2.3 From 37843d0f6e7a23af19a6cbe68b9503d318fe1a29 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 11 Apr 2022 08:23:41 +0100 Subject: clk: microchip: mpfs: don't reset disabled peripherals The current clock driver for PolarFire SoC puts the hardware behind "periph" clocks into reset if their clock is disabled. CONFIG_PM was recently added to the riscv defconfig and exposed issues caused by this behaviour, where the Cadence GEM was being put into reset between its bringup & the PHY bringup: https://lore.kernel.org/linux-riscv/9f4b057d-1985-5fd3-65c0-f944161c7792@microchip.com/ Fix this (for now) by removing the reset from mpfs_periph_clk_disable. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Reviewed-by: Daire McNamara Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220411072340.740981-1-conor.dooley@microchip.com Signed-off-by: Stephen Boyd --- drivers/clk/microchip/clk-mpfs.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/clk/microchip/clk-mpfs.c b/drivers/clk/microchip/clk-mpfs.c index aa1561b773d6..744ef2ba2a0c 100644 --- a/drivers/clk/microchip/clk-mpfs.c +++ b/drivers/clk/microchip/clk-mpfs.c @@ -200,10 +200,6 @@ static void mpfs_periph_clk_disable(struct clk_hw *hw) spin_lock_irqsave(&mpfs_clk_lock, flags); - reg = readl_relaxed(base_addr + REG_SUBBLK_RESET_CR); - val = reg | (1u << periph->shift); - writel_relaxed(val, base_addr + REG_SUBBLK_RESET_CR); - reg = readl_relaxed(base_addr + REG_SUBBLK_CLOCK_CR); val = reg & ~(1u << periph->shift); writel_relaxed(val, base_addr + REG_SUBBLK_CLOCK_CR); -- cgit v1.2.3 From d968fda3de91ec2f250ba27149cb1b5e9516415f Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 20 Apr 2022 02:54:47 +0300 Subject: clk: qcom: clk-rcg2: fix gfx3d frequency calculation Since the commit 948fb0969eae ("clk: Always clamp the rounded rate"), the clk_core_determine_round_nolock() would clamp the requested rate between min and max rates from the rate request. Normally these fields would be filled by clk_core_get_boundaries() called from clk_round_rate(). However clk_gfx3d_determine_rate() uses a manually crafted rate request, which did not have these fields filled. Thus the requested frequency would be clamped to 0, resulting in weird frequencies being requested from the hardware. Fix this by filling min_rate and max_rate to the values valid for the respective PLLs (0 and ULONG_MAX). Fixes: 948fb0969eae ("clk: Always clamp the rounded rate") Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20220419235447.1586192-1-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson Reported-by: Rob Clark Signed-off-by: Stephen Boyd --- drivers/clk/qcom/clk-rcg2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c index f675fd969c4d..e9c357309fd9 100644 --- a/drivers/clk/qcom/clk-rcg2.c +++ b/drivers/clk/qcom/clk-rcg2.c @@ -818,7 +818,7 @@ EXPORT_SYMBOL_GPL(clk_pixel_ops); static int clk_gfx3d_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) { - struct clk_rate_request parent_req = { }; + struct clk_rate_request parent_req = { .min_rate = 0, .max_rate = ULONG_MAX }; struct clk_rcg2_gfx3d *cgfx = to_clk_rcg2_gfx3d(hw); struct clk_hw *xo, *p0, *p1, *p2; unsigned long p0_rate; -- cgit v1.2.3 From 8f9fb2abe22ece8cac47a8cef3e716441d4ba169 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Wed, 13 Apr 2022 08:58:28 +0100 Subject: clk: microchip: mpfs: fix parents for FIC clocks The fabric interconnects are on the AXI bus not AHB. Update their parent clocks to fix this. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Reviewed-by: Daire McNamara Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220413075835.3354193-2-conor.dooley@microchip.com Acked-by: Palmer Dabbelt Signed-off-by: Stephen Boyd --- drivers/clk/microchip/clk-mpfs.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/clk/microchip/clk-mpfs.c b/drivers/clk/microchip/clk-mpfs.c index 744ef2ba2a0c..8c433b37d6c6 100644 --- a/drivers/clk/microchip/clk-mpfs.c +++ b/drivers/clk/microchip/clk-mpfs.c @@ -273,11 +273,11 @@ static struct mpfs_periph_hw_clock mpfs_periph_clks[] = { CLK_PERIPH(CLK_GPIO1, "clk_periph_gpio1", PARENT_CLK(AHB), 21, 0), CLK_PERIPH(CLK_GPIO2, "clk_periph_gpio2", PARENT_CLK(AHB), 22, 0), CLK_PERIPH(CLK_DDRC, "clk_periph_ddrc", PARENT_CLK(AHB), 23, CLK_IS_CRITICAL), - CLK_PERIPH(CLK_FIC0, "clk_periph_fic0", PARENT_CLK(AHB), 24, CLK_IS_CRITICAL), - CLK_PERIPH(CLK_FIC1, "clk_periph_fic1", PARENT_CLK(AHB), 25, CLK_IS_CRITICAL), - CLK_PERIPH(CLK_FIC2, "clk_periph_fic2", PARENT_CLK(AHB), 26, CLK_IS_CRITICAL), - CLK_PERIPH(CLK_FIC3, "clk_periph_fic3", PARENT_CLK(AHB), 27, CLK_IS_CRITICAL), - CLK_PERIPH(CLK_ATHENA, "clk_periph_athena", PARENT_CLK(AHB), 28, 0), + CLK_PERIPH(CLK_FIC0, "clk_periph_fic0", PARENT_CLK(AXI), 24, CLK_IS_CRITICAL), + CLK_PERIPH(CLK_FIC1, "clk_periph_fic1", PARENT_CLK(AXI), 25, CLK_IS_CRITICAL), + CLK_PERIPH(CLK_FIC2, "clk_periph_fic2", PARENT_CLK(AXI), 26, CLK_IS_CRITICAL), + CLK_PERIPH(CLK_FIC3, "clk_periph_fic3", PARENT_CLK(AXI), 27, CLK_IS_CRITICAL), + CLK_PERIPH(CLK_ATHENA, "clk_periph_athena", PARENT_CLK(AXI), 28, 0), CLK_PERIPH(CLK_CFM, "clk_periph_cfm", PARENT_CLK(AHB), 29, 0), }; -- cgit v1.2.3 From a2438f82366eaeb4dc122c021884ea8deea5b215 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Wed, 13 Apr 2022 08:58:29 +0100 Subject: clk: microchip: mpfs: mark CLK_ATHENA as critical CLK_ATHENA is another fabric interconnect and should be marked as critical as with FIC0-3, since disabling it will cause part of the fabric to go into reset. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Reviewed-by: Daire McNamara Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220413075835.3354193-3-conor.dooley@microchip.com Acked-by: Palmer Dabbelt Signed-off-by: Stephen Boyd --- drivers/clk/microchip/clk-mpfs.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/clk/microchip/clk-mpfs.c b/drivers/clk/microchip/clk-mpfs.c index 8c433b37d6c6..7056d6d5b92b 100644 --- a/drivers/clk/microchip/clk-mpfs.c +++ b/drivers/clk/microchip/clk-mpfs.c @@ -245,8 +245,10 @@ static const struct clk_ops mpfs_periph_clk_ops = { * trap handler * - CLK_MMUART0: reserved by the hss * - CLK_DDRC: provides clock to the ddr subsystem - * - CLK_FICx: these provide clocks for sections of the fpga fabric, disabling them would - * cause the fabric to go into reset + * - CLK_FICx: these provide the processor side clocks to the "FIC" (Fabric InterConnect) + * clock domain crossers which provide the interface to the FPGA fabric. Disabling them + * causes the FPGA fabric to go into reset. + * - CLK_ATHENA: The athena clock is FIC4, which is reserved for the Athena TeraFire. */ static struct mpfs_periph_hw_clock mpfs_periph_clks[] = { @@ -277,7 +279,7 @@ static struct mpfs_periph_hw_clock mpfs_periph_clks[] = { CLK_PERIPH(CLK_FIC1, "clk_periph_fic1", PARENT_CLK(AXI), 25, CLK_IS_CRITICAL), CLK_PERIPH(CLK_FIC2, "clk_periph_fic2", PARENT_CLK(AXI), 26, CLK_IS_CRITICAL), CLK_PERIPH(CLK_FIC3, "clk_periph_fic3", PARENT_CLK(AXI), 27, CLK_IS_CRITICAL), - CLK_PERIPH(CLK_ATHENA, "clk_periph_athena", PARENT_CLK(AXI), 28, 0), + CLK_PERIPH(CLK_ATHENA, "clk_periph_athena", PARENT_CLK(AXI), 28, CLK_IS_CRITICAL), CLK_PERIPH(CLK_CFM, "clk_periph_cfm", PARENT_CLK(AHB), 29, 0), }; -- cgit v1.2.3 From 2b6190c804238cbdca4e4fbe20304151203a3837 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Wed, 13 Apr 2022 08:58:30 +0100 Subject: riscv: dts: microchip: fix usage of fic clocks on mpfs The fic clocks passed to the pcie controller and other peripherals in the device tree are not the clocks they actually run on. The fics are actually clock domain crossers & the clock config blocks output is the mss/cpu side input to the interconnect. The peripherals are actually clocked by fixed frequency clocks embedded in the fpga fabric. Fix the device tree so that these peripherals use the correct clocks. The fabric side FIC0 & FIC1 inputs both use the same 125 MHz, so only one clock is created for them. Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree") Reviewed-by: Daire McNamara Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220413075835.3354193-4-conor.dooley@microchip.com Acked-by: Palmer Dabbelt Signed-off-by: Stephen Boyd --- arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi | 16 ++++++++++++++-- arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2 +- 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi index 854320e17b28..ccaac3371cf9 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi @@ -7,7 +7,7 @@ reg = <0x0 0x41000000 0x0 0xF0>; microchip,sync-update-mask = /bits/ 32 <0>; #pwm-cells = <2>; - clocks = <&clkcfg CLK_FIC3>; + clocks = <&fabric_clk3>; status = "disabled"; }; @@ -16,10 +16,22 @@ reg = <0x0 0x44000000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clkcfg CLK_FIC3>; + clocks = <&fabric_clk3>; interrupt-parent = <&plic>; interrupts = <122>; clock-frequency = <100000>; status = "disabled"; }; + + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <62500000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; }; diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi index c5c9d1360de0..3b48b7f35410 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi @@ -424,7 +424,7 @@ <0 0 0 3 &pcie_intc 2>, <0 0 0 4 &pcie_intc 3>; interrupt-map-mask = <0 0 0 7>; - clocks = <&clkcfg CLK_FIC0>, <&clkcfg CLK_FIC1>, <&clkcfg CLK_FIC3>; + clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; clock-names = "fic0", "fic1", "fic3"; ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; msi-parent = <&pcie>; -- cgit v1.2.3 From 3ebb9fdf466a246bb17164b70039dce584a0b959 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Wed, 13 Apr 2022 08:58:31 +0100 Subject: dt-bindings: clk: mpfs document msspll dri registers As there are two sections of registers that are responsible for clock configuration on the PolarFire SoC: add the dynamic reconfiguration interface section to the binding & describe what each of the sections are used for. Fixes: 2145bb687e3f ("dt-bindings: clk: microchip: Add Microchip PolarFire host binding") Reviewed-by: Daire McNamara Acked-by: Krzysztof Kozlowski Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220413075835.3354193-5-conor.dooley@microchip.com Acked-by: Palmer Dabbelt Signed-off-by: Stephen Boyd --- Documentation/devicetree/bindings/clock/microchip,mpfs.yaml | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml index 0c15afa2214c..016a4f378b9b 100644 --- a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml +++ b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml @@ -22,7 +22,16 @@ properties: const: microchip,mpfs-clkcfg reg: - maxItems: 1 + items: + - description: | + clock config registers: + These registers contain enable, reset & divider tables for the, cpu, + axi, ahb and rtc/mtimer reference clocks as well as enable and reset + for the peripheral clocks. + - description: | + mss pll dri registers: + Block of registers responsible for dynamic reconfiguration of the mss + pll clocks: maxItems: 1 @@ -51,7 +60,7 @@ examples: #size-cells = <2>; clkcfg: clock-controller@20002000 { compatible = "microchip,mpfs-clkcfg"; - reg = <0x0 0x20002000 0x0 0x1000>; + reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; clocks = <&ref>; #clock-cells = <1>; }; -- cgit v1.2.3 From 8be99c7b8bb17f2b82af4a0a6798b795f4d74436 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Wed, 13 Apr 2022 08:58:32 +0100 Subject: dt-bindings: clk: mpfs: add defines for two new clocks The RTC reference and MSSPLL were previously not documented or defined, as they were unused. Add their defines to the PolarFire SoC header. Fixes: 2145bb687e3f ("dt-bindings: clk: microchip: Add Microchip PolarFire host binding") Reviewed-by: Daire McNamara Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220413075835.3354193-6-conor.dooley@microchip.com Acked-by: Krzysztof Kozlowski Acked-by: Palmer Dabbelt Signed-off-by: Stephen Boyd --- include/dt-bindings/clock/microchip,mpfs-clock.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/include/dt-bindings/clock/microchip,mpfs-clock.h b/include/dt-bindings/clock/microchip,mpfs-clock.h index 73f2a9324857..4048669bf756 100644 --- a/include/dt-bindings/clock/microchip,mpfs-clock.h +++ b/include/dt-bindings/clock/microchip,mpfs-clock.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ /* * Daire McNamara, - * Copyright (C) 2020 Microchip Technology Inc. All rights reserved. + * Copyright (C) 2020-2022 Microchip Technology Inc. All rights reserved. */ #ifndef _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ @@ -42,4 +42,7 @@ #define CLK_ATHENA 31 #define CLK_CFM 32 +#define CLK_RTCREF 33 +#define CLK_MSSPLL 34 + #endif /* _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ */ -- cgit v1.2.3 From 8e8fbab4f1e659f9955bc946a2fc71b8c3ba17e0 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Wed, 13 Apr 2022 08:58:33 +0100 Subject: dt-bindings: rtc: add refclk to mpfs-rtc The rtc on PolarFire SoC does not use the AHB clock as its reference frequency, but rather a 1 MHz refclk that it shares with MTIMER. Add this second clock to the binding as a required property. Fixes: 4cbcc0d7b397 ("dt-bindings: rtc: add bindings for microchip mpfs rtc") Reviewed-by: Daire McNamara Acked-by: Krzysztof Kozlowski Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220413075835.3354193-7-conor.dooley@microchip.com Acked-by: Palmer Dabbelt Signed-off-by: Stephen Boyd --- .../devicetree/bindings/rtc/microchip,mfps-rtc.yaml | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml index a2e984ea3553..500c62becd6b 100644 --- a/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml @@ -31,11 +31,19 @@ properties: to that of the RTC's count register. clocks: - maxItems: 1 + items: + - description: | + AHB clock + - description: | + Reference clock: divided by the prescaler to create a time-based + strobe (typically 1 Hz) for the calendar counter. By default, the rtc + on the PolarFire SoC shares it's reference with MTIMER so this will + be a 1 MHz clock. clock-names: items: - const: rtc + - const: rtcref required: - compatible @@ -48,11 +56,12 @@ additionalProperties: false examples: - | + #include "dt-bindings/clock/microchip,mpfs-clock.h" rtc@20124000 { compatible = "microchip,mpfs-rtc"; reg = <0x20124000 0x1000>; - clocks = <&clkcfg 21>; - clock-names = "rtc"; + clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>; + clock-names = "rtc", "rtcref"; interrupts = <80>, <81>; }; ... -- cgit v1.2.3 From 445c2da89747e2583062d988c98726cb2744b357 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Wed, 13 Apr 2022 08:58:34 +0100 Subject: clk: microchip: mpfs: re-parent the configurable clocks Currently the mpfs clock driver uses a reference clock called the "msspll", set in the device tree, as the parent for the cpu/axi/ahb (config) clocks. The frequency of the msspll is determined by the FPGA bitstream & the bootloader configures the clock to match the bitstream. The real reference is provided by a 100 or 125 MHz off chip oscillator. However, the msspll clock is not actually the parent of all clocks on the system - the reference clock for the rtc/mtimer actually has the off chip oscillator as its parent. In order to fix this, add support for reading the configuration of the msspll & reparent the "config" clocks so that they are derived from this clock rather than the reference in the device tree. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Reviewed-by: Daire McNamara Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220413075835.3354193-8-conor.dooley@microchip.com Acked-by: Palmer Dabbelt Signed-off-by: Stephen Boyd --- drivers/clk/microchip/clk-mpfs.c | 151 ++++++++++++++++++++++++++++++++++----- 1 file changed, 132 insertions(+), 19 deletions(-) diff --git a/drivers/clk/microchip/clk-mpfs.c b/drivers/clk/microchip/clk-mpfs.c index 7056d6d5b92b..8338a4c15404 100644 --- a/drivers/clk/microchip/clk-mpfs.c +++ b/drivers/clk/microchip/clk-mpfs.c @@ -11,20 +11,47 @@ #include /* address offset of control registers */ +#define REG_MSSPLL_REF_CR 0x08u +#define REG_MSSPLL_POSTDIV_CR 0x10u +#define REG_MSSPLL_SSCG_2_CR 0x2Cu #define REG_CLOCK_CONFIG_CR 0x08u #define REG_SUBBLK_CLOCK_CR 0x84u #define REG_SUBBLK_RESET_CR 0x88u +#define MSSPLL_FBDIV_SHIFT 0x00u +#define MSSPLL_FBDIV_WIDTH 0x0Cu +#define MSSPLL_REFDIV_SHIFT 0x08u +#define MSSPLL_REFDIV_WIDTH 0x06u +#define MSSPLL_POSTDIV_SHIFT 0x08u +#define MSSPLL_POSTDIV_WIDTH 0x07u +#define MSSPLL_FIXED_DIV 4u + struct mpfs_clock_data { void __iomem *base; + void __iomem *msspll_base; struct clk_hw_onecell_data hw_data; }; +struct mpfs_msspll_hw_clock { + void __iomem *base; + unsigned int id; + u32 reg_offset; + u32 shift; + u32 width; + u32 flags; + struct clk_hw hw; + struct clk_init_data init; +}; + +#define to_mpfs_msspll_clk(_hw) container_of(_hw, struct mpfs_msspll_hw_clock, hw) + struct mpfs_cfg_clock { const struct clk_div_table *table; unsigned int id; + u32 reg_offset; u8 shift; u8 width; + u8 flags; }; struct mpfs_cfg_hw_clock { @@ -55,7 +82,7 @@ struct mpfs_periph_hw_clock { */ static DEFINE_SPINLOCK(mpfs_clk_lock); -static const struct clk_parent_data mpfs_cfg_parent[] = { +static const struct clk_parent_data mpfs_ext_ref[] = { { .index = 0 }, }; @@ -69,6 +96,75 @@ static const struct clk_div_table mpfs_div_ahb_table[] = { { 0, 0 } }; +static unsigned long mpfs_clk_msspll_recalc_rate(struct clk_hw *hw, unsigned long prate) +{ + struct mpfs_msspll_hw_clock *msspll_hw = to_mpfs_msspll_clk(hw); + void __iomem *mult_addr = msspll_hw->base + msspll_hw->reg_offset; + void __iomem *ref_div_addr = msspll_hw->base + REG_MSSPLL_REF_CR; + void __iomem *postdiv_addr = msspll_hw->base + REG_MSSPLL_POSTDIV_CR; + u32 mult, ref_div, postdiv; + + mult = readl_relaxed(mult_addr) >> MSSPLL_FBDIV_SHIFT; + mult &= clk_div_mask(MSSPLL_FBDIV_WIDTH); + ref_div = readl_relaxed(ref_div_addr) >> MSSPLL_REFDIV_SHIFT; + ref_div &= clk_div_mask(MSSPLL_REFDIV_WIDTH); + postdiv = readl_relaxed(postdiv_addr) >> MSSPLL_POSTDIV_SHIFT; + postdiv &= clk_div_mask(MSSPLL_POSTDIV_WIDTH); + + return prate * mult / (ref_div * MSSPLL_FIXED_DIV * postdiv); +} + +static const struct clk_ops mpfs_clk_msspll_ops = { + .recalc_rate = mpfs_clk_msspll_recalc_rate, +}; + +#define CLK_PLL(_id, _name, _parent, _shift, _width, _flags, _offset) { \ + .id = _id, \ + .shift = _shift, \ + .width = _width, \ + .reg_offset = _offset, \ + .flags = _flags, \ + .hw.init = CLK_HW_INIT_PARENTS_DATA(_name, _parent, &mpfs_clk_msspll_ops, 0), \ +} + +static struct mpfs_msspll_hw_clock mpfs_msspll_clks[] = { + CLK_PLL(CLK_MSSPLL, "clk_msspll", mpfs_ext_ref, MSSPLL_FBDIV_SHIFT, + MSSPLL_FBDIV_WIDTH, 0, REG_MSSPLL_SSCG_2_CR), +}; + +static int mpfs_clk_register_msspll(struct device *dev, struct mpfs_msspll_hw_clock *msspll_hw, + void __iomem *base) +{ + msspll_hw->base = base; + + return devm_clk_hw_register(dev, &msspll_hw->hw); +} + +static int mpfs_clk_register_mssplls(struct device *dev, struct mpfs_msspll_hw_clock *msspll_hws, + unsigned int num_clks, struct mpfs_clock_data *data) +{ + void __iomem *base = data->msspll_base; + unsigned int i; + int ret; + + for (i = 0; i < num_clks; i++) { + struct mpfs_msspll_hw_clock *msspll_hw = &msspll_hws[i]; + + ret = mpfs_clk_register_msspll(dev, msspll_hw, base); + if (ret) + return dev_err_probe(dev, ret, "failed to register msspll id: %d\n", + CLK_MSSPLL); + + data->hw_data.hws[msspll_hw->id] = &msspll_hw->hw; + } + + return 0; +} + +/* + * "CFG" clocks + */ + static unsigned long mpfs_cfg_clk_recalc_rate(struct clk_hw *hw, unsigned long prate) { struct mpfs_cfg_hw_clock *cfg_hw = to_mpfs_cfg_clk(hw); @@ -76,10 +172,10 @@ static unsigned long mpfs_cfg_clk_recalc_rate(struct clk_hw *hw, unsigned long p void __iomem *base_addr = cfg_hw->sys_base; u32 val; - val = readl_relaxed(base_addr + REG_CLOCK_CONFIG_CR) >> cfg->shift; + val = readl_relaxed(base_addr + cfg->reg_offset) >> cfg->shift; val &= clk_div_mask(cfg->width); - return prate / (1u << val); + return divider_recalc_rate(hw, prate, val, cfg->table, cfg->flags, cfg->width); } static long mpfs_cfg_clk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) @@ -105,11 +201,10 @@ static int mpfs_cfg_clk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned return divider_setting; spin_lock_irqsave(&mpfs_clk_lock, flags); - - val = readl_relaxed(base_addr + REG_CLOCK_CONFIG_CR); + val = readl_relaxed(base_addr + cfg->reg_offset); val &= ~(clk_div_mask(cfg->width) << cfg_hw->cfg.shift); val |= divider_setting << cfg->shift; - writel_relaxed(val, base_addr + REG_CLOCK_CONFIG_CR); + writel_relaxed(val, base_addr + cfg->reg_offset); spin_unlock_irqrestore(&mpfs_clk_lock, flags); @@ -122,19 +217,23 @@ static const struct clk_ops mpfs_clk_cfg_ops = { .set_rate = mpfs_cfg_clk_set_rate, }; -#define CLK_CFG(_id, _name, _parent, _shift, _width, _table, _flags) { \ - .cfg.id = _id, \ - .cfg.shift = _shift, \ - .cfg.width = _width, \ - .cfg.table = _table, \ - .hw.init = CLK_HW_INIT_PARENTS_DATA(_name, _parent, &mpfs_clk_cfg_ops, \ - _flags), \ +#define CLK_CFG(_id, _name, _parent, _shift, _width, _table, _flags, _offset) { \ + .cfg.id = _id, \ + .cfg.shift = _shift, \ + .cfg.width = _width, \ + .cfg.table = _table, \ + .cfg.reg_offset = _offset, \ + .cfg.flags = _flags, \ + .hw.init = CLK_HW_INIT(_name, _parent, &mpfs_clk_cfg_ops, 0), \ } static struct mpfs_cfg_hw_clock mpfs_cfg_clks[] = { - CLK_CFG(CLK_CPU, "clk_cpu", mpfs_cfg_parent, 0, 2, mpfs_div_cpu_axi_table, 0), - CLK_CFG(CLK_AXI, "clk_axi", mpfs_cfg_parent, 2, 2, mpfs_div_cpu_axi_table, 0), - CLK_CFG(CLK_AHB, "clk_ahb", mpfs_cfg_parent, 4, 2, mpfs_div_ahb_table, 0), + CLK_CFG(CLK_CPU, "clk_cpu", "clk_msspll", 0, 2, mpfs_div_cpu_axi_table, 0, + REG_CLOCK_CONFIG_CR), + CLK_CFG(CLK_AXI, "clk_axi", "clk_msspll", 2, 2, mpfs_div_cpu_axi_table, 0, + REG_CLOCK_CONFIG_CR), + CLK_CFG(CLK_AHB, "clk_ahb", "clk_msspll", 4, 2, mpfs_div_ahb_table, 0, + REG_CLOCK_CONFIG_CR), }; static int mpfs_clk_register_cfg(struct device *dev, struct mpfs_cfg_hw_clock *cfg_hw, @@ -160,13 +259,17 @@ static int mpfs_clk_register_cfgs(struct device *dev, struct mpfs_cfg_hw_clock * return dev_err_probe(dev, ret, "failed to register clock id: %d\n", cfg_hw->cfg.id); - id = cfg_hws[i].cfg.id; + id = cfg_hw->cfg.id; data->hw_data.hws[id] = &cfg_hw->hw; } return 0; } +/* + * peripheral clocks - devices connected to axi or ahb buses. + */ + static int mpfs_periph_clk_enable(struct clk_hw *hw) { struct mpfs_periph_hw_clock *periph_hw = to_mpfs_periph_clk(hw); @@ -320,8 +423,9 @@ static int mpfs_clk_probe(struct platform_device *pdev) unsigned int num_clks; int ret; - /* CLK_RESERVED is not part of cfg_clks nor periph_clks, so add 1 */ - num_clks = ARRAY_SIZE(mpfs_cfg_clks) + ARRAY_SIZE(mpfs_periph_clks) + 1; + /* CLK_RESERVED is not part of clock arrays, so add 1 */ + num_clks = ARRAY_SIZE(mpfs_msspll_clks) + ARRAY_SIZE(mpfs_cfg_clks) + + ARRAY_SIZE(mpfs_periph_clks) + 1; clk_data = devm_kzalloc(dev, struct_size(clk_data, hw_data.hws, num_clks), GFP_KERNEL); if (!clk_data) @@ -331,8 +435,17 @@ static int mpfs_clk_probe(struct platform_device *pdev) if (IS_ERR(clk_data->base)) return PTR_ERR(clk_data->base); + clk_data->msspll_base = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(clk_data->msspll_base)) + return PTR_ERR(clk_data->msspll_base); + clk_data->hw_data.num = num_clks; + ret = mpfs_clk_register_mssplls(dev, mpfs_msspll_clks, ARRAY_SIZE(mpfs_msspll_clks), + clk_data); + if (ret) + return ret; + ret = mpfs_clk_register_cfgs(dev, mpfs_cfg_clks, ARRAY_SIZE(mpfs_cfg_clks), clk_data); if (ret) return ret; -- cgit v1.2.3 From 1c6a7ea32b8cfb1725ef4def26eb9f5bc6e00303 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Wed, 13 Apr 2022 08:58:35 +0100 Subject: clk: microchip: mpfs: add RTCREF clock control The reference clock used by the PolarFire SoC's onboard rtc was missing from the clock driver. Add this clock at the "config" clock level, with the external reference clock as its parent. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Reviewed-by: Daire McNamara Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220413075835.3354193-9-conor.dooley@microchip.com Acked-by: Palmer Dabbelt Signed-off-by: Stephen Boyd --- drivers/clk/microchip/clk-mpfs.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/clk/microchip/clk-mpfs.c b/drivers/clk/microchip/clk-mpfs.c index 8338a4c15404..070c3b896559 100644 --- a/drivers/clk/microchip/clk-mpfs.c +++ b/drivers/clk/microchip/clk-mpfs.c @@ -15,6 +15,7 @@ #define REG_MSSPLL_POSTDIV_CR 0x10u #define REG_MSSPLL_SSCG_2_CR 0x2Cu #define REG_CLOCK_CONFIG_CR 0x08u +#define REG_RTC_CLOCK_CR 0x0Cu #define REG_SUBBLK_CLOCK_CR 0x84u #define REG_SUBBLK_RESET_CR 0x88u @@ -96,6 +97,17 @@ static const struct clk_div_table mpfs_div_ahb_table[] = { { 0, 0 } }; +/* + * The only two supported reference clock frequencies for the PolarFire SoC are + * 100 and 125 MHz, as the rtc reference is required to be 1 MHz. + * It therefore only needs to have divider table entries corresponding to + * divide by 100 and 125. + */ +static const struct clk_div_table mpfs_div_rtcref_table[] = { + { 100, 100 }, { 125, 125 }, + { 0, 0 } +}; + static unsigned long mpfs_clk_msspll_recalc_rate(struct clk_hw *hw, unsigned long prate) { struct mpfs_msspll_hw_clock *msspll_hw = to_mpfs_msspll_clk(hw); @@ -234,6 +246,16 @@ static struct mpfs_cfg_hw_clock mpfs_cfg_clks[] = { REG_CLOCK_CONFIG_CR), CLK_CFG(CLK_AHB, "clk_ahb", "clk_msspll", 4, 2, mpfs_div_ahb_table, 0, REG_CLOCK_CONFIG_CR), + { + .cfg.id = CLK_RTCREF, + .cfg.shift = 0, + .cfg.width = 12, + .cfg.table = mpfs_div_rtcref_table, + .cfg.reg_offset = REG_RTC_CLOCK_CR, + .cfg.flags = CLK_DIVIDER_ONE_BASED, + .hw.init = + CLK_HW_INIT_PARENTS_DATA("clk_rtcref", mpfs_ext_ref, &mpfs_clk_cfg_ops, 0), + } }; static int mpfs_clk_register_cfg(struct device *dev, struct mpfs_cfg_hw_clock *cfg_hw, @@ -359,7 +381,7 @@ static struct mpfs_periph_hw_clock mpfs_periph_clks[] = { CLK_PERIPH(CLK_MAC0, "clk_periph_mac0", PARENT_CLK(AHB), 1, 0), CLK_PERIPH(CLK_MAC1, "clk_periph_mac1", PARENT_CLK(AHB), 2, 0), CLK_PERIPH(CLK_MMC, "clk_periph_mmc", PARENT_CLK(AHB), 3, 0), - CLK_PERIPH(CLK_TIMER, "clk_periph_timer", PARENT_CLK(AHB), 4, 0), + CLK_PERIPH(CLK_TIMER, "clk_periph_timer", PARENT_CLK(RTCREF), 4, 0), CLK_PERIPH(CLK_MMUART0, "clk_periph_mmuart0", PARENT_CLK(AHB), 5, CLK_IS_CRITICAL), CLK_PERIPH(CLK_MMUART1, "clk_periph_mmuart1", PARENT_CLK(AHB), 6, 0), CLK_PERIPH(CLK_MMUART2, "clk_periph_mmuart2", PARENT_CLK(AHB), 7, 0), -- cgit v1.2.3 From 6deb9bf4580d53fea191fa0689a4446c8937398d Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Wed, 13 Apr 2022 08:58:36 +0100 Subject: riscv: dts: microchip: reparent mpfs clocks The 600M clock in the fabric is not the real reference, replace it with a 125M clock which is the correct value for the icicle kit. Rename the msspllclk node to mssrefclk since this is now the input to, not the output of, the msspll clock. Control of the msspll clock has been moved into the clock configurator, so add the register range for it to the clk configurator. Finally, add a new output of the clock config block which will provide the 1M reference clock for the MTIMER and the rtc. Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree") Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") Reviewed-by: Daire McNamara Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220413075835.3354193-10-conor.dooley@microchip.com Acked-by: Palmer Dabbelt Signed-off-by: Stephen Boyd --- arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts | 2 +- arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts index cd2fe80fa81a..3392153dd0f1 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts @@ -45,7 +45,7 @@ }; &refclk { - clock-frequency = <600000000>; + clock-frequency = <125000000>; }; &mmuart1 { diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi index 3b48b7f35410..746c4d4e7686 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi @@ -141,7 +141,7 @@ }; }; - refclk: msspllclk { + refclk: mssrefclk { compatible = "fixed-clock"; #clock-cells = <0>; }; @@ -190,7 +190,7 @@ clkcfg: clkcfg@20002000 { compatible = "microchip,mpfs-clkcfg"; - reg = <0x0 0x20002000 0x0 0x1000>; + reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; clocks = <&refclk>; #clock-cells = <1>; }; @@ -393,8 +393,8 @@ reg = <0x0 0x20124000 0x0 0x1000>; interrupt-parent = <&plic>; interrupts = <80>, <81>; - clocks = <&clkcfg CLK_RTC>; - clock-names = "rtc"; + clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>; + clock-names = "rtc", "rtcref"; status = "disabled"; }; -- cgit v1.2.3 From b4f3d5f06e29b7020f19cc788b2c2de750e888a1 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Mon, 11 Apr 2022 00:00:59 -0500 Subject: clk: sunxi-ng: sun6i-rtc: Mark rtc-32k as critical Because some newer hardware variants have multiple possible parents for the RTC's timekeeping clock, this driver models it as a "rtc-32k" clock. However, it does not add any consumer for this clock. This causes the common clock framework to disable it, preventing RTC time access. Since the RTC's timekeeping clock should always be enabled, regardless of which drivers are loaded, let's mark this clock as critical instead of adding a consumer in the RTC driver. Fixes: d91612d7f01a ("clk: sunxi-ng: Add support for the sun6i RTC clocks") Signed-off-by: Samuel Holland Acked-by: Jernej Skrabec Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220411050100.40964-1-samuel@sholland.org --- drivers/clk/sunxi-ng/ccu-sun6i-rtc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c index ffb72d9a9c36..2f3ddc908ebd 100644 --- a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c +++ b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c @@ -241,6 +241,7 @@ static struct clk_init_data rtc_32k_init_data = { .ops = &ccu_mux_ops, .parent_hws = rtc_32k_parents, .num_parents = ARRAY_SIZE(rtc_32k_parents), /* updated during probe */ + .flags = CLK_IS_CRITICAL, }; static struct ccu_mux rtc_32k_clk = { -- cgit v1.2.3 From f58ca215cda1975f77b2b762903684a3c101bec9 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Thu, 21 Apr 2022 21:43:08 +0800 Subject: clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets") Signed-off-by: Yang Yingliang Reviewed-by: Samuel Holland Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220421134308.2885094-1-yangyingliang@huawei.com --- drivers/clk/sunxi/clk-sun9i-mmc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/sunxi/clk-sun9i-mmc.c b/drivers/clk/sunxi/clk-sun9i-mmc.c index 542b31d6e96d..636bcf2439ef 100644 --- a/drivers/clk/sunxi/clk-sun9i-mmc.c +++ b/drivers/clk/sunxi/clk-sun9i-mmc.c @@ -109,6 +109,8 @@ static int sun9i_a80_mmc_config_clk_probe(struct platform_device *pdev) spin_lock_init(&data->lock); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + return -EINVAL; /* one clock/reset pair per word */ count = DIV_ROUND_UP((resource_size(r)), SUN9I_MMC_WIDTH); data->membase = devm_ioremap_resource(&pdev->dev, r); -- cgit v1.2.3