From 2e5db6eb3c23e5dc8171eb8f6af7a97ef9fcf3a9 Mon Sep 17 00:00:00 2001 From: Petr Oros Date: Wed, 19 Jun 2019 14:29:42 +0200 Subject: be2net: fix link failure after ethtool offline test Certain cards in conjunction with certain switches need a little more time for link setup that results in ethtool link test failure after offline test. Patch adds a loop that waits for a link setup finish. Changes in v2: - added fixes header Fixes: 4276e47e2d1c ("be2net: Add link test to list of ethtool self tests.") Signed-off-by: Petr Oros Reviewed-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_ethtool.c | 28 ++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c index 8a6785173228..492f8769ac12 100644 --- a/drivers/net/ethernet/emulex/benet/be_ethtool.c +++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c @@ -891,7 +891,7 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data) { struct be_adapter *adapter = netdev_priv(netdev); - int status; + int status, cnt; u8 link_status = 0; if (adapter->function_caps & BE_FUNCTION_CAPS_SUPER_NIC) { @@ -902,6 +902,9 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test, memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM); + /* check link status before offline tests */ + link_status = netif_carrier_ok(netdev); + if (test->flags & ETH_TEST_FL_OFFLINE) { if (be_loopback_test(adapter, BE_MAC_LOOPBACK, &data[0]) != 0) test->flags |= ETH_TEST_FL_FAILED; @@ -922,13 +925,26 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test, test->flags |= ETH_TEST_FL_FAILED; } - status = be_cmd_link_status_query(adapter, NULL, &link_status, 0); - if (status) { - test->flags |= ETH_TEST_FL_FAILED; - data[4] = -1; - } else if (!link_status) { + /* link status was down prior to test */ + if (!link_status) { test->flags |= ETH_TEST_FL_FAILED; data[4] = 1; + return; + } + + for (cnt = 10; cnt; cnt--) { + status = be_cmd_link_status_query(adapter, NULL, &link_status, + 0); + if (status) { + test->flags |= ETH_TEST_FL_FAILED; + data[4] = -1; + break; + } + + if (link_status) + break; + + msleep_interruptible(500); } } -- cgit v1.2.3 From aad1dcc4f011ea409850e040363dff1e59aa4175 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 19 Jun 2019 15:34:07 +0200 Subject: ppp: mppe: Add softdep to arc4 The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a softdep line, so that the corresponding module gets prepared gracefully. Without this, a simple inclusion to initrd via dracut failed due to the missing dependency, for example. Signed-off-by: Takashi Iwai Signed-off-by: David S. Miller --- drivers/net/ppp/ppp_mppe.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ppp/ppp_mppe.c b/drivers/net/ppp/ppp_mppe.c index ff61dd8748de..66c8e65f6872 100644 --- a/drivers/net/ppp/ppp_mppe.c +++ b/drivers/net/ppp/ppp_mppe.c @@ -63,6 +63,7 @@ MODULE_AUTHOR("Frank Cusack "); MODULE_DESCRIPTION("Point-to-Point Protocol Microsoft Point-to-Point Encryption support"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_ALIAS("ppp-compress-" __stringify(CI_MPPE)); +MODULE_SOFTDEP("pre: arc4"); MODULE_VERSION("1.0.2"); static unsigned int -- cgit v1.2.3 From a1e5388b4d5fc78688e5e9ee6641f779721d6291 Mon Sep 17 00:00:00 2001 From: Roland Hii Date: Wed, 19 Jun 2019 22:13:48 +0800 Subject: net: stmmac: fixed new system time seconds value calculation When ADDSUB bit is set, the system time seconds field is calculated as the complement of the seconds part of the update value. For example, if 3.000000001 seconds need to be subtracted from the system time, this field is calculated as 2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD Previously, the 0x100000000 is mistakenly written as 100000000. This is further simplified from sec = (0x100000000ULL - sec); to sec = -sec; Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4") Signed-off-by: Roland Hii Signed-off-by: Ong Boon Leong Signed-off-by: Voon Weifeng Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c index 2dcdf761d525..020159622559 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c @@ -112,7 +112,7 @@ static int adjust_systime(void __iomem *ioaddr, u32 sec, u32 nsec, * programmed with (2^32 – ) */ if (gmac4) - sec = (100000000ULL - sec); + sec = -sec; value = readl(ioaddr + PTP_TCR); if (value & PTP_TCR_TSCTRLSSR) -- cgit v1.2.3 From d0bb82fd60183868f46c8ccc595a3d61c3334a18 Mon Sep 17 00:00:00 2001 From: Roland Hii Date: Wed, 19 Jun 2019 22:41:48 +0800 Subject: net: stmmac: set IC bit when transmitting frames with HW timestamp When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit hardware timestamp. The polling will most likely timeout if the tx coalesce is enabled due to the Interrupt-on-Completion (IC) bit is not set in tx descriptor for those frames. This patch will ignore the tx coalesce parameter and set the IC bit when transmitting PTP frames which need to report out the frame transmit hardware timestamp to user space. Fixes: f748be531d70 ("net: stmmac: Rework coalesce timer and fix multi-queue races") Signed-off-by: Roland Hii Signed-off-by: Ong Boon Leong Signed-off-by: Voon Weifeng Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 06dd51f47cfd..06358fe5b245 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2947,12 +2947,15 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev) /* Manage tx mitigation */ tx_q->tx_count_frames += nfrags + 1; - if (priv->tx_coal_frames <= tx_q->tx_count_frames) { + if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) && + !(priv->synopsys_id >= DWMAC_CORE_4_00 && + (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + priv->hwts_tx_en)) { + stmmac_tx_timer_arm(priv, queue); + } else { + tx_q->tx_count_frames = 0; stmmac_set_tx_ic(priv, desc); priv->xstats.tx_set_ic_bit++; - tx_q->tx_count_frames = 0; - } else { - stmmac_tx_timer_arm(priv, queue); } skb_tx_timestamp(skb); @@ -3166,12 +3169,15 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) * element in case of no SG. */ tx_q->tx_count_frames += nfrags + 1; - if (priv->tx_coal_frames <= tx_q->tx_count_frames) { + if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) && + !(priv->synopsys_id >= DWMAC_CORE_4_00 && + (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + priv->hwts_tx_en)) { + stmmac_tx_timer_arm(priv, queue); + } else { + tx_q->tx_count_frames = 0; stmmac_set_tx_ic(priv, desc); priv->xstats.tx_set_ic_bit++; - tx_q->tx_count_frames = 0; - } else { - stmmac_tx_timer_arm(priv, queue); } skb_tx_timestamp(skb); -- cgit v1.2.3 From 8ac8a01092b2added0749ef937037bf1912e13e3 Mon Sep 17 00:00:00 2001 From: Sergej Benilov Date: Thu, 20 Jun 2019 11:02:18 +0200 Subject: sis900: fix TX completion Since commit 605ad7f184b60cfaacbc038aa6c55ee68dee3c89 "tcp: refine TSO autosizing", outbound throughput is dramatically reduced for some connections, as sis900 is doing TX completion within idle states only. Make TX completion happen after every transmitted packet. Test: netperf before patch: > netperf -H remote -l -2000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 253.44 0.06 after patch: > netperf -H remote -l -10000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 5.38 14.89 Thx to Dave Miller and Eric Dumazet for helpful hints Signed-off-by: Sergej Benilov Signed-off-by: David S. Miller --- drivers/net/ethernet/sis/sis900.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c index 67f9bb6e941b..9b036c857b1d 100644 --- a/drivers/net/ethernet/sis/sis900.c +++ b/drivers/net/ethernet/sis/sis900.c @@ -1057,7 +1057,7 @@ sis900_open(struct net_device *net_dev) sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); /* Enable all known interrupts by setting the interrupt mask. */ - sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE); + sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC); sw32(cr, RxENA | sr32(cr)); sw32(ier, IE); @@ -1578,7 +1578,7 @@ static void sis900_tx_timeout(struct net_device *net_dev) sw32(txdp, sis_priv->tx_ring_dma); /* Enable all known interrupts by setting the interrupt mask. */ - sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE); + sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC); } /** @@ -1618,7 +1618,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev) spin_unlock_irqrestore(&sis_priv->lock, flags); return NETDEV_TX_OK; } - sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len); + sis_priv->tx_ring[entry].cmdsts = (OWN | INTR | skb->len); sw32(cr, TxENA | sr32(cr)); sis_priv->cur_tx ++; @@ -1674,7 +1674,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance) do { status = sr32(isr); - if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0) + if ((status & (HIBERR|TxURN|TxERR|TxIDLE|TxDESC|RxORN|RxERR|RxOK)) == 0) /* nothing intresting happened */ break; handled = 1; @@ -1684,7 +1684,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance) /* Rx interrupt */ sis900_rx(net_dev); - if (status & (TxURN | TxERR | TxIDLE)) + if (status & (TxURN | TxERR | TxIDLE | TxDESC)) /* Tx interrupt */ sis900_finish_xmit(net_dev); @@ -1896,8 +1896,8 @@ static void sis900_finish_xmit (struct net_device *net_dev) if (tx_status & OWN) { /* The packet is not transmitted yet (owned by hardware) ! - * Note: the interrupt is generated only when Tx Machine - * is idle, so this is an almost impossible case */ + * Note: this is an almost impossible condition + * in case of TxDESC ('descriptor interrupt') */ break; } @@ -2473,7 +2473,7 @@ static int sis900_resume(struct pci_dev *pci_dev) sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); /* Enable all known interrupts by setting the interrupt mask. */ - sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE); + sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC); sw32(cr, RxENA | sr32(cr)); sw32(ier, IE); -- cgit v1.2.3 From c492d4c74dd3f87559883ffa0f94a8f1ae3fe5f5 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Thu, 20 Jun 2019 18:39:28 +0800 Subject: tipc: change to use register_pernet_device This patch is to fix a dst defcnt leak, which can be reproduced by doing: # ip net a c; ip net a s; modprobe tipc # ip net e s ip l a n eth1 type veth peer n eth1 netns c # ip net e c ip l s lo up; ip net e c ip l s eth1 up # ip net e s ip l s lo up; ip net e s ip l s eth1 up # ip net e c ip a a 1.1.1.2/8 dev eth1 # ip net e s ip a a 1.1.1.1/8 dev eth1 # ip net e c tipc b e m udp n u1 localip 1.1.1.2 # ip net e s tipc b e m udp n u1 localip 1.1.1.1 # ip net d c; ip net d s; rmmod tipc and it will get stuck and keep logging the error: unregister_netdevice: waiting for lo to become free. Usage count = 1 The cause is that a dst is held by the udp sock's sk_rx_dst set on udp rx path with udp_early_demux == 1, and this dst (eventually holding lo dev) can't be released as bearer's removal in tipc pernet .exit happens after lo dev's removal, default_device pernet .exit. "There are two distinct types of pernet_operations recognized: subsys and device. At creation all subsys init functions are called before device init functions, and at destruction all device exit functions are called before subsys exit function." So by calling register_pernet_device instead to register tipc_net_ops, the pernet .exit() will be invoked earlier than loopback dev's removal when a netns is being destroyed, as fou/gue does. Note that vxlan and geneve udp tunnels don't have this issue, as the udp sock is released in their device ndo_stop(). This fix is also necessary for tipc dst_cache, which will hold dsts on tx path and I will introduce in my next patch. Reported-by: Li Shuang Signed-off-by: Xin Long Acked-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/tipc/core.c b/net/tipc/core.c index ed536c05252a..c8370722f0bb 100644 --- a/net/tipc/core.c +++ b/net/tipc/core.c @@ -134,7 +134,7 @@ static int __init tipc_init(void) if (err) goto out_sysctl; - err = register_pernet_subsys(&tipc_net_ops); + err = register_pernet_device(&tipc_net_ops); if (err) goto out_pernet; @@ -142,7 +142,7 @@ static int __init tipc_init(void) if (err) goto out_socket; - err = register_pernet_subsys(&tipc_topsrv_net_ops); + err = register_pernet_device(&tipc_topsrv_net_ops); if (err) goto out_pernet_topsrv; @@ -153,11 +153,11 @@ static int __init tipc_init(void) pr_info("Started in single node mode\n"); return 0; out_bearer: - unregister_pernet_subsys(&tipc_topsrv_net_ops); + unregister_pernet_device(&tipc_topsrv_net_ops); out_pernet_topsrv: tipc_socket_stop(); out_socket: - unregister_pernet_subsys(&tipc_net_ops); + unregister_pernet_device(&tipc_net_ops); out_pernet: tipc_unregister_sysctl(); out_sysctl: @@ -172,9 +172,9 @@ out_netlink: static void __exit tipc_exit(void) { tipc_bearer_cleanup(); - unregister_pernet_subsys(&tipc_topsrv_net_ops); + unregister_pernet_device(&tipc_topsrv_net_ops); tipc_socket_stop(); - unregister_pernet_subsys(&tipc_net_ops); + unregister_pernet_device(&tipc_net_ops); tipc_netlink_stop(); tipc_netlink_compat_stop(); tipc_unregister_sysctl(); -- cgit v1.2.3 From 45d5cb137c3638b3a310f41b31d8e79daf647f14 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 21 Jun 2019 21:44:37 +0800 Subject: net/sched: cbs: Fix error path of cbs_module_init If register_qdisc fails, we should unregister netdevice notifier. Reported-by: Hulk Robot Fixes: e0a7683d30e9 ("net/sched: cbs: fix port_rate miscalculation") Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- net/sched/sch_cbs.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/sched/sch_cbs.c b/net/sched/sch_cbs.c index e16a3d37d2bc..732e109c3055 100644 --- a/net/sched/sch_cbs.c +++ b/net/sched/sch_cbs.c @@ -549,12 +549,17 @@ static struct notifier_block cbs_device_notifier = { static int __init cbs_module_init(void) { - int err = register_netdevice_notifier(&cbs_device_notifier); + int err; + err = register_netdevice_notifier(&cbs_device_notifier); if (err) return err; - return register_qdisc(&cbs_qdisc_ops); + err = register_qdisc(&cbs_qdisc_ops); + if (err) + unregister_netdevice_notifier(&cbs_device_notifier); + + return err; } static void __exit cbs_module_exit(void) -- cgit v1.2.3 From 9354544cbccf68da1b047f8fb7b47630e3c8a59d Mon Sep 17 00:00:00 2001 From: Dirk van der Merwe Date: Sun, 23 Jun 2019 21:26:58 -0700 Subject: net/tls: fix page double free on TX cleanup With commit 94850257cf0f ("tls: Fix tls_device handling of partial records") a new path was introduced to cleanup partial records during sk_proto_close. This path does not handle the SW KTLS tx_list cleanup. This is unnecessary though since the free_resources calls for both SW and offload paths will cleanup a partial record. The visible effect is the following warning, but this bug also causes a page double free. WARNING: CPU: 7 PID: 4000 at net/core/stream.c:206 sk_stream_kill_queues+0x103/0x110 RIP: 0010:sk_stream_kill_queues+0x103/0x110 RSP: 0018:ffffb6df87e07bd0 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff8c21db4971c0 RCX: 0000000000000007 RDX: ffffffffffffffa0 RSI: 000000000000001d RDI: ffff8c21db497270 RBP: ffff8c21db497270 R08: ffff8c29f4748600 R09: 000000010020001a R10: ffffb6df87e07aa0 R11: ffffffff9a445600 R12: 0000000000000007 R13: 0000000000000000 R14: ffff8c21f03f2900 R15: ffff8c21f03b8df0 Call Trace: inet_csk_destroy_sock+0x55/0x100 tcp_close+0x25d/0x400 ? tcp_check_oom+0x120/0x120 tls_sk_proto_close+0x127/0x1c0 inet_release+0x3c/0x60 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0xd8/0x210 task_work_run+0x84/0xa0 do_exit+0x2dc/0xb90 ? release_sock+0x43/0x90 do_group_exit+0x3a/0xa0 get_signal+0x295/0x720 do_signal+0x36/0x610 ? SYSC_recvfrom+0x11d/0x130 exit_to_usermode_loop+0x69/0xb0 do_syscall_64+0x173/0x180 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fe9b9abc10d RSP: 002b:00007fe9b19a1d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 0000000000000006 RCX: 00007fe9b9abc10d RDX: 0000000000000002 RSI: 0000000000000080 RDI: 00007fe948003430 RBP: 00007fe948003410 R08: 00007fe948003430 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005603739d9080 R13: 00007fe9b9ab9f90 R14: 00007fe948003430 R15: 0000000000000000 Fixes: 94850257cf0f ("tls: Fix tls_device handling of partial records") Signed-off-by: Dirk van der Merwe Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- include/net/tls.h | 15 --------------- net/tls/tls_main.c | 3 ++- 2 files changed, 2 insertions(+), 16 deletions(-) diff --git a/include/net/tls.h b/include/net/tls.h index 4a55ce6a303f..53d96bca220d 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -373,21 +373,6 @@ static inline bool tls_is_partially_sent_record(struct tls_context *ctx) return !!ctx->partially_sent_record; } -static inline int tls_complete_pending_work(struct sock *sk, - struct tls_context *ctx, - int flags, long *timeo) -{ - int rc = 0; - - if (unlikely(sk->sk_write_pending)) - rc = wait_on_pending_writer(sk, timeo); - - if (!rc && tls_is_partially_sent_record(ctx)) - rc = tls_push_partial_record(sk, ctx, flags); - - return rc; -} - static inline bool tls_is_pending_open_record(struct tls_context *tls_ctx) { return tls_ctx->pending_open_record_frags; diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index fc81ae18cc44..e2b69e805d46 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -279,7 +279,8 @@ static void tls_sk_proto_close(struct sock *sk, long timeout) goto skip_tx_cleanup; } - if (!tls_complete_pending_work(sk, ctx, 0, &timeo)) + if (unlikely(sk->sk_write_pending) && + !wait_on_pending_writer(sk, &timeo)) tls_handle_open_record(sk, 0); /* We need these for tls_sw_fallback handling of other packets */ -- cgit v1.2.3 From 55655e3d1197fff16a7a05088fb0e5eba50eac55 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 24 Jun 2019 02:38:20 -0700 Subject: net/packet: fix memory leak in packet_set_ring() syzbot found we can leak memory in packet_set_ring(), if user application provides buggy parameters. Fixes: 7f953ab2ba46 ("af_packet: TX_RING support for TPACKET_V3") Signed-off-by: Eric Dumazet Cc: Sowmini Varadhan Reported-by: syzbot Signed-off-by: David S. Miller --- net/packet/af_packet.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index a29d66da7394..0b4cf94f0233 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -4314,7 +4314,7 @@ static int packet_set_ring(struct sock *sk, union tpacket_req_u *req_u, req3->tp_sizeof_priv || req3->tp_feature_req_word) { err = -EINVAL; - goto out; + goto out_free_pg_vec; } } break; @@ -4378,6 +4378,7 @@ static int packet_set_ring(struct sock *sk, union tpacket_req_u *req_u, prb_shutdown_retire_blk_timer(po, rb_queue); } +out_free_pg_vec: if (pg_vec) free_pg_vec(pg_vec, order, req->tp_block_nr); out: -- cgit v1.2.3 From 2bf4ecbcc7d837903c5967c9274f41b1ad29d530 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Fri, 21 Jun 2019 17:26:35 +0200 Subject: net: macb: do not copy the mac address if NULL This patch fixes the MAC address setup in the probe. The MAC address retrieved using of_get_mac_address was checked for not containing an error, but it may also be NULL which wasn't tested. Fix it by replacing IS_ERR with IS_ERR_OR_NULL. Fixes: 541ddc66d665 ("net: macb: support of_get_mac_address new ERR_PTR error") Signed-off-by: Antoine Tenart Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 2375a13bb446..262a28ff81fc 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -4180,7 +4180,7 @@ static int macb_probe(struct platform_device *pdev) if (PTR_ERR(mac) == -EPROBE_DEFER) { err = -EPROBE_DEFER; goto err_out_free_netdev; - } else if (!IS_ERR(mac)) { + } else if (!IS_ERR_OR_NULL(mac)) { ether_addr_copy(bp->dev->dev_addr, mac); } else { macb_get_hwaddr(bp); -- cgit v1.2.3 From 4f07b80c973348a99b5d2a32476a2e7877e94a05 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Tue, 25 Jun 2019 00:28:19 +0800 Subject: tipc: check msg->req data len in tipc_nl_compat_bearer_disable This patch is to fix an uninit-value issue, reported by syzbot: BUG: KMSAN: uninit-value in memchr+0xce/0x110 lib/string.c:981 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310 memchr+0xce/0x110 lib/string.c:981 string_is_valid net/tipc/netlink_compat.c:176 [inline] tipc_nl_compat_bearer_disable+0x2a1/0x480 net/tipc/netlink_compat.c:449 __tipc_nl_compat_doit net/tipc/netlink_compat.c:327 [inline] tipc_nl_compat_doit+0x3ac/0xb00 net/tipc/netlink_compat.c:360 tipc_nl_compat_handle net/tipc/netlink_compat.c:1178 [inline] tipc_nl_compat_recv+0x1b1b/0x27b0 net/tipc/netlink_compat.c:1281 TLV_GET_DATA_LEN() may return a negtive int value, which will be used as size_t (becoming a big unsigned long) passed into memchr, cause this issue. Similar to what it does in tipc_nl_compat_bearer_enable(), this fix is to return -EINVAL when TLV_GET_DATA_LEN() is negtive in tipc_nl_compat_bearer_disable(), as well as in tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats(). v1->v2: - add the missing Fixes tags per Eric's request. Fixes: 0762216c0ad2 ("tipc: fix uninit-value in tipc_nl_compat_bearer_enable") Fixes: 8b66fee7f8ee ("tipc: fix uninit-value in tipc_nl_compat_link_reset_stats") Reported-by: syzbot+30eaa8bf392f7fafffaf@syzkaller.appspotmail.com Signed-off-by: Xin Long Signed-off-by: David S. Miller --- net/tipc/netlink_compat.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c index c6a04c09d075..cf155061c472 100644 --- a/net/tipc/netlink_compat.c +++ b/net/tipc/netlink_compat.c @@ -445,7 +445,11 @@ static int tipc_nl_compat_bearer_disable(struct tipc_nl_compat_cmd_doit *cmd, if (!bearer) return -EMSGSIZE; - len = min_t(int, TLV_GET_DATA_LEN(msg->req), TIPC_MAX_BEARER_NAME); + len = TLV_GET_DATA_LEN(msg->req); + if (len <= 0) + return -EINVAL; + + len = min_t(int, len, TIPC_MAX_BEARER_NAME); if (!string_is_valid(name, len)) return -EINVAL; @@ -539,7 +543,11 @@ static int tipc_nl_compat_link_stat_dump(struct tipc_nl_compat_msg *msg, name = (char *)TLV_DATA(msg->req); - len = min_t(int, TLV_GET_DATA_LEN(msg->req), TIPC_MAX_LINK_NAME); + len = TLV_GET_DATA_LEN(msg->req); + if (len <= 0) + return -EINVAL; + + len = min_t(int, len, TIPC_MAX_BEARER_NAME); if (!string_is_valid(name, len)) return -EINVAL; @@ -817,7 +825,11 @@ static int tipc_nl_compat_link_reset_stats(struct tipc_nl_compat_cmd_doit *cmd, if (!link) return -EMSGSIZE; - len = min_t(int, TLV_GET_DATA_LEN(msg->req), TIPC_MAX_LINK_NAME); + len = TLV_GET_DATA_LEN(msg->req); + if (len <= 0) + return -EINVAL; + + len = min_t(int, len, TIPC_MAX_BEARER_NAME); if (!string_is_valid(name, len)) return -EINVAL; -- cgit v1.2.3 From 904d88d743b0c94092c5117955eab695df8109e8 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Mon, 24 Jun 2019 18:45:11 +0200 Subject: qmi_wwan: Fix out-of-bounds read The syzbot reported Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x67/0x231 mm/kasan/report.c:188 __kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317 kasan_report+0xe/0x20 mm/kasan/common.c:614 qmi_wwan_probe+0x342/0x360 drivers/net/usb/qmi_wwan.c:1417 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x660 drivers/base/dd.c:509 driver_probe_device+0x104/0x210 drivers/base/dd.c:670 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 Caused by too many confusing indirections and casts. id->driver_info is a pointer stored in a long. We want the pointer here, not the address of it. Thanks-to: Hillf Danton Reported-by: syzbot+b68605d7fadd21510de1@syzkaller.appspotmail.com Cc: Kristian Evensen Fixes: e4bf63482c30 ("qmi_wwan: Add quirk for Quectel dynamic config") Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index d080f8048e52..8b4ad10cf940 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1482,7 +1482,7 @@ static int qmi_wwan_probe(struct usb_interface *intf, * different. Ignore the current interface if the number of endpoints * equals the number for the diag interface (two). */ - info = (void *)&id->driver_info; + info = (void *)id->driver_info; if (info->data & QMI_WWAN_QUIRK_QUECTEL_DYNCFG) { if (desc->bNumEndpoints == 2) -- cgit v1.2.3 From 38c73529de13e1e10914de7030b659a2f8b01c3b Mon Sep 17 00:00:00 2001 From: Stephen Suryaputra Date: Mon, 24 Jun 2019 20:14:06 -0400 Subject: ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop In commit 19e4e768064a8 ("ipv4: Fix raw socket lookup for local traffic"), the dif argument to __raw_v4_lookup() is coming from the returned value of inet_iif() but the change was done only for the first lookup. Subsequent lookups in the while loop still use skb->dev->ifIndex. Fixes: 19e4e768064a8 ("ipv4: Fix raw socket lookup for local traffic") Signed-off-by: Stephen Suryaputra Reviewed-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/raw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index 0b8e06ca75d6..40a6abbc9cf6 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -197,7 +197,7 @@ static int raw_v4_input(struct sk_buff *skb, const struct iphdr *iph, int hash) } sk = __raw_v4_lookup(net, sk_next(sk), iph->protocol, iph->saddr, iph->daddr, - skb->dev->ifindex, sdif); + dif, sdif); } out: read_unlock(&raw_v4_hashinfo.lock); -- cgit v1.2.3 From b8e8a86337c25941cb06e9a1c8ee01ab9aab0cc2 Mon Sep 17 00:00:00 2001 From: Eiichi Tsukata Date: Tue, 25 Jun 2019 12:08:01 +0900 Subject: net/ipv6: Fix misuse of proc_dointvec "skip_notify_on_dev_down" /proc/sys/net/ipv6/route/skip_notify_on_dev_down assumes given value to be 0 or 1. Use proc_dointvec_minmax instead of proc_dointvec. Fixes: 7c6bb7d2faaf ("net/ipv6: Add knob to skip DELROUTE message ondevice down") Signed-off-by: Eiichi Tsukata Signed-off-by: David S. Miller --- net/ipv6/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 11ad62effd56..aade636c6be6 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -5281,7 +5281,7 @@ static struct ctl_table ipv6_route_table_template[] = { .data = &init_net.ipv6.sysctl.skip_notify_on_dev_down, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = proc_dointvec, + .proc_handler = proc_dointvec_minmax, .extra1 = &zero, .extra2 = &one, }, -- cgit v1.2.3 From 30d8177e8ac776d89d387fad547af6a0f599210e Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 26 Jun 2019 16:08:44 +0800 Subject: bonding: Always enable vlan tx offload We build vlan on top of bonding interface, which vlan offload is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is BOND_XMIT_POLICY_ENCAP34. Because vlan tx offload is off, vlan tci is cleared and skb push the vlan header in validate_xmit_vlan() while sending from vlan devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to get information from protocol headers encapsulated within vlan, because 'nhoff' is points to IP header, so bond hashing is based on layer 2 info, which fails to distribute packets across slaves. This patch always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master") Suggested-by: Jiri Pirko Signed-off-by: YueHaibing Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 407f4095a37a..799fc38c5c34 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4320,12 +4320,12 @@ void bond_setup(struct net_device *bond_dev) bond_dev->features |= NETIF_F_NETNS_LOCAL; bond_dev->hw_features = BOND_VLAN_FEATURES | - NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER; bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL | NETIF_F_GSO_UDP_L4; bond_dev->features |= bond_dev->hw_features; + bond_dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX; } /* Destroy a bonding device. -- cgit v1.2.3 From 4480879251fb89b1c5585112b1ccc8c3333b41af Mon Sep 17 00:00:00 2001 From: Huaping Zhou Date: Wed, 26 Jun 2019 17:47:49 +0200 Subject: net/smc: hold conns_lock before calling smc_lgr_register_conn() After smc_lgr_create(), the newly created link group is added to smc_lgr_list, thus is accessible from other context. Although link group creation is serialized by smc_create_lgr_pending, the new link group may still be accessed concurrently. For example, if ib_device is no longer active, smc_ib_port_event_work() will call smc_port_terminate(), which in turn will call __smc_lgr_terminate() on every link group of this device. So conns_lock is required here. Signed-off-by: Huaping Zhou Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/smc_core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index 2d2850adc2a3..4ca50ddf8d16 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -652,7 +652,10 @@ create: rc = smc_lgr_create(smc, ini); if (rc) goto out; + lgr = conn->lgr; + write_lock_bh(&lgr->conns_lock); smc_lgr_register_conn(conn); /* add smc conn to lgr */ + write_unlock_bh(&lgr->conns_lock); } conn->local_tx_ctrl.common.type = SMC_CDC_MSG_TYPE; conn->local_tx_ctrl.len = SMC_WR_TX_SIZE; -- cgit v1.2.3 From 8c33bf1b0a9663d1742cb19ee71da46a1d8670dd Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 26 Jun 2019 17:47:50 +0200 Subject: net/smc: Fix error path in smc_init If register_pernet_subsys success in smc_init, we should cleanup it in case any other error. Fixes: 64e28b52c7a6 (net/smc: add pnet table namespace support") Signed-off-by: YueHaibing Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/af_smc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 0c874e996f85..7621ec2f539c 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -2029,7 +2029,7 @@ static int __init smc_init(void) rc = smc_pnet_init(); if (rc) - return rc; + goto out_pernet_subsys; rc = smc_llc_init(); if (rc) { @@ -2080,6 +2080,9 @@ out_proto: proto_unregister(&smc_proto); out_pnet: smc_pnet_exit(); +out_pernet_subsys: + unregister_pernet_subsys(&smc_net_ops); + return rc; } -- cgit v1.2.3 From ee4297420d56a0033a8593e80b33fcc93fda8509 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Thu, 27 Jun 2019 00:03:39 +0800 Subject: team: Always enable vlan tx offload We should rather have vlan_tci filled all the way down to the transmitting netdevice and let it do the hw/sw vlan implementation. Suggested-by: Jiri Pirko Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- drivers/net/team/team.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index b48006e7fa2f..36916bf51ee6 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -2128,12 +2128,12 @@ static void team_setup(struct net_device *dev) dev->features |= NETIF_F_NETNS_LOCAL; dev->hw_features = TEAM_VLAN_FEATURES | - NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER; dev->hw_features |= NETIF_F_GSO_ENCAP_ALL | NETIF_F_GSO_UDP_L4; dev->features |= dev->hw_features; + dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX; } static int team_newlink(struct net *src_net, struct net_device *dev, -- cgit v1.2.3 From 5b18f1289808fee5d04a7e6ecf200189f41a4db6 Mon Sep 17 00:00:00 2001 From: Stephen Suryaputra Date: Wed, 26 Jun 2019 02:21:16 -0400 Subject: ipv4: reset rt_iif for recirculated mcast/bcast out pkts Multicast or broadcast egress packets have rt_iif set to the oif. These packets might be recirculated back as input and lookup to the raw sockets may fail because they are bound to the incoming interface (skb_iif). If rt_iif is not zero, during the lookup, inet_iif() function returns rt_iif instead of skb_iif. Hence, the lookup fails. v2: Make it non vrf specific (David Ahern). Reword the changelog to reflect it. Signed-off-by: Stephen Suryaputra Reviewed-by: David Ahern Signed-off-by: David S. Miller --- include/net/route.h | 1 + net/ipv4/ip_output.c | 12 ++++++++++++ net/ipv4/route.c | 33 +++++++++++++++++++++++++++++++++ 3 files changed, 46 insertions(+) diff --git a/include/net/route.h b/include/net/route.h index 065b47754f05..55ff71ffb796 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -221,6 +221,7 @@ void ip_rt_get_source(u8 *src, struct sk_buff *skb, struct rtable *rt); struct rtable *rt_dst_alloc(struct net_device *dev, unsigned int flags, u16 type, bool nopolicy, bool noxfrm, bool will_cache); +struct rtable *rt_dst_clone(struct net_device *dev, struct rtable *rt); struct in_ifaddr; void fib_add_ifaddr(struct in_ifaddr *); diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 16f9159234a2..8c2ec35b6512 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -318,6 +318,7 @@ static int ip_finish_output(struct net *net, struct sock *sk, struct sk_buff *sk static int ip_mc_finish_output(struct net *net, struct sock *sk, struct sk_buff *skb) { + struct rtable *new_rt; int ret; ret = BPF_CGROUP_RUN_PROG_INET_EGRESS(sk, skb); @@ -326,6 +327,17 @@ static int ip_mc_finish_output(struct net *net, struct sock *sk, return ret; } + /* Reset rt_iif so that inet_iif() will return skb->skb_iif. Setting + * this to non-zero causes ipi_ifindex in in_pktinfo to be overwritten, + * see ipv4_pktinfo_prepare(). + */ + new_rt = rt_dst_clone(net->loopback_dev, skb_rtable(skb)); + if (new_rt) { + new_rt->rt_iif = 0; + skb_dst_drop(skb); + skb_dst_set(skb, &new_rt->dst); + } + return dev_loopback_xmit(net, sk, skb); } diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 6cb7cff22db9..8ea0735a6754 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1647,6 +1647,39 @@ struct rtable *rt_dst_alloc(struct net_device *dev, } EXPORT_SYMBOL(rt_dst_alloc); +struct rtable *rt_dst_clone(struct net_device *dev, struct rtable *rt) +{ + struct rtable *new_rt; + + new_rt = dst_alloc(&ipv4_dst_ops, dev, 1, DST_OBSOLETE_FORCE_CHK, + rt->dst.flags); + + if (new_rt) { + new_rt->rt_genid = rt_genid_ipv4(dev_net(dev)); + new_rt->rt_flags = rt->rt_flags; + new_rt->rt_type = rt->rt_type; + new_rt->rt_is_input = rt->rt_is_input; + new_rt->rt_iif = rt->rt_iif; + new_rt->rt_pmtu = rt->rt_pmtu; + new_rt->rt_mtu_locked = rt->rt_mtu_locked; + new_rt->rt_gw_family = rt->rt_gw_family; + if (rt->rt_gw_family == AF_INET) + new_rt->rt_gw4 = rt->rt_gw4; + else if (rt->rt_gw_family == AF_INET6) + new_rt->rt_gw6 = rt->rt_gw6; + INIT_LIST_HEAD(&new_rt->rt_uncached); + + new_rt->dst.flags |= DST_HOST; + new_rt->dst.input = rt->dst.input; + new_rt->dst.output = rt->dst.output; + new_rt->dst.error = rt->dst.error; + new_rt->dst.lastuse = jiffies; + new_rt->dst.lwtstate = lwtstate_get(rt->dst.lwtstate); + } + return new_rt; +} +EXPORT_SYMBOL(rt_dst_clone); + /* called in rcu_read_lock() section */ int ip_mc_validate_source(struct sk_buff *skb, __be32 daddr, __be32 saddr, u8 tos, struct net_device *dev, -- cgit v1.2.3 From 48dd73d08d4dda47ee31cc8611fb16840fc16803 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Sat, 22 Jun 2019 08:46:37 +0000 Subject: net: aquantia: fix vlans not working over bridged network In configuration of vlan over bridge over aquantia device it was found that vlan tagged traffic is dropped on chip. The reason is that bridge device enables promisc mode, but in atlantic chip vlan filters will still apply. So we have to corellate promisc settings with vlan configuration. The solution is to track in a separate state variable the need of vlan forced promisc. And also consider generic promisc configuration when doing vlan filter config. Fixes: 7975d2aff5af ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_filters.c | 10 ++++++++-- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 1 + drivers/net/ethernet/aquantia/atlantic/aq_nic.h | 1 + .../net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 19 +++++++++++++------ 4 files changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_filters.c b/drivers/net/ethernet/aquantia/atlantic/aq_filters.c index 18bc035da850..1fff462a4175 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_filters.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_filters.c @@ -843,9 +843,14 @@ int aq_filters_vlans_update(struct aq_nic_s *aq_nic) return err; if (aq_nic->ndev->features & NETIF_F_HW_VLAN_CTAG_FILTER) { - if (hweight < AQ_VLAN_MAX_FILTERS) - err = aq_hw_ops->hw_filter_vlan_ctrl(aq_hw, true); + if (hweight < AQ_VLAN_MAX_FILTERS && hweight > 0) { + err = aq_hw_ops->hw_filter_vlan_ctrl(aq_hw, + !(aq_nic->packet_filter & IFF_PROMISC)); + aq_nic->aq_nic_cfg.is_vlan_force_promisc = false; + } else { /* otherwise left in promiscue mode */ + aq_nic->aq_nic_cfg.is_vlan_force_promisc = true; + } } return err; @@ -866,6 +871,7 @@ int aq_filters_vlan_offload_off(struct aq_nic_s *aq_nic) if (unlikely(!aq_hw_ops->hw_filter_vlan_ctrl)) return -EOPNOTSUPP; + aq_nic->aq_nic_cfg.is_vlan_force_promisc = true; err = aq_hw_ops->hw_filter_vlan_ctrl(aq_hw, false); if (err) return err; diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 0da5e161ec5d..41172fbebddd 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -126,6 +126,7 @@ void aq_nic_cfg_start(struct aq_nic_s *self) cfg->link_speed_msk &= cfg->aq_hw_caps->link_speed_msk; cfg->features = cfg->aq_hw_caps->hw_features; + cfg->is_vlan_force_promisc = true; } static int aq_nic_update_link_status(struct aq_nic_s *self) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h index eb2e3c7c36f9..0f22f5d5691b 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h @@ -35,6 +35,7 @@ struct aq_nic_cfg_s { u32 flow_control; u32 link_speed_msk; u32 wol; + bool is_vlan_force_promisc; u16 is_mc_list_enabled; u16 mc_list_count; bool is_autoneg; diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 1c7593d54035..13ac2661a473 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -778,8 +778,15 @@ static int hw_atl_b0_hw_packet_filter_set(struct aq_hw_s *self, unsigned int packet_filter) { unsigned int i = 0U; + struct aq_nic_cfg_s *cfg = self->aq_nic_cfg; + + hw_atl_rpfl2promiscuous_mode_en_set(self, + IS_FILTER_ENABLED(IFF_PROMISC)); + + hw_atl_rpf_vlan_prom_mode_en_set(self, + IS_FILTER_ENABLED(IFF_PROMISC) || + cfg->is_vlan_force_promisc); - hw_atl_rpfl2promiscuous_mode_en_set(self, IS_FILTER_ENABLED(IFF_PROMISC)); hw_atl_rpfl2multicast_flr_en_set(self, IS_FILTER_ENABLED(IFF_ALLMULTI), 0); @@ -788,13 +795,13 @@ static int hw_atl_b0_hw_packet_filter_set(struct aq_hw_s *self, hw_atl_rpfl2broadcast_en_set(self, IS_FILTER_ENABLED(IFF_BROADCAST)); - self->aq_nic_cfg->is_mc_list_enabled = IS_FILTER_ENABLED(IFF_MULTICAST); + cfg->is_mc_list_enabled = IS_FILTER_ENABLED(IFF_MULTICAST); for (i = HW_ATL_B0_MAC_MIN; i < HW_ATL_B0_MAC_MAX; ++i) hw_atl_rpfl2_uc_flr_en_set(self, - (self->aq_nic_cfg->is_mc_list_enabled && - (i <= self->aq_nic_cfg->mc_list_count)) ? - 1U : 0U, i); + (cfg->is_mc_list_enabled && + (i <= cfg->mc_list_count)) ? + 1U : 0U, i); return aq_hw_err_from_flags(self); } @@ -1086,7 +1093,7 @@ static int hw_atl_b0_hw_vlan_set(struct aq_hw_s *self, static int hw_atl_b0_hw_vlan_ctrl(struct aq_hw_s *self, bool enable) { /* set promisc in case of disabing the vland filter */ - hw_atl_rpf_vlan_prom_mode_en_set(self, !!!enable); + hw_atl_rpf_vlan_prom_mode_en_set(self, !enable); return aq_hw_err_from_flags(self); } -- cgit v1.2.3 From 22e72b5e049b95789b34a4cef316c791e7c2fed5 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 23 Jun 2019 17:12:57 +0200 Subject: net: dsa: microchip: Use gpiod_set_value_cansleep() Replace gpiod_set_value() with gpiod_set_value_cansleep(), as the switch reset GPIO can be connected to e.g. I2C GPIO expander and it is perfectly fine for the kernel to sleep for a bit in ksz_switch_register(). Signed-off-by: Marek Vasut Cc: Andrew Lunn Cc: Florian Fainelli Cc: Linus Walleij Cc: Tristram Ha Cc: Woojung Huh Reviewed-by: Andrew Lunn Reviewed-by: Linus Walleij Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz_common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index f46086fa9064..db91b213eae1 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -436,9 +436,9 @@ int ksz_switch_register(struct ksz_device *dev, return PTR_ERR(dev->reset_gpio); if (dev->reset_gpio) { - gpiod_set_value(dev->reset_gpio, 1); + gpiod_set_value_cansleep(dev->reset_gpio, 1); mdelay(10); - gpiod_set_value(dev->reset_gpio, 0); + gpiod_set_value_cansleep(dev->reset_gpio, 0); } mutex_init(&dev->dev_mutex); @@ -487,7 +487,7 @@ void ksz_switch_remove(struct ksz_device *dev) dsa_unregister_switch(dev->ds); if (dev->reset_gpio) - gpiod_set_value(dev->reset_gpio, 1); + gpiod_set_value_cansleep(dev->reset_gpio, 1); } EXPORT_SYMBOL(ksz_switch_remove); -- cgit v1.2.3 From 9b1c1ef13b35fa35051b635ca9fbda39fe6bbc70 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 24 Jun 2019 16:01:08 +0200 Subject: ipv6: constify rt6_nexthop() There is no functional change in this patch, it only prepares the next one. rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const variables. Signed-off-by: Nicolas Dichtel Reported-by: kbuild test robot Acked-by: Nick Desaulniers Signed-off-by: David S. Miller --- drivers/net/vrf.c | 2 +- include/net/ip6_route.h | 4 ++-- net/bluetooth/6lowpan.c | 4 ++-- net/ipv6/ip6_output.c | 2 +- net/netfilter/nf_flow_table_ip.c | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index 11b9525dff27..311b0cc6eb98 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -350,8 +350,8 @@ static int vrf_finish_output6(struct net *net, struct sock *sk, { struct dst_entry *dst = skb_dst(skb); struct net_device *dev = dst->dev; + const struct in6_addr *nexthop; struct neighbour *neigh; - struct in6_addr *nexthop; int ret; nf_reset(skb); diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h index 4790beaa86e0..ee7405e759ba 100644 --- a/include/net/ip6_route.h +++ b/include/net/ip6_route.h @@ -262,8 +262,8 @@ static inline bool ip6_sk_ignore_df(const struct sock *sk) inet6_sk(sk)->pmtudisc == IPV6_PMTUDISC_OMIT; } -static inline struct in6_addr *rt6_nexthop(struct rt6_info *rt, - struct in6_addr *daddr) +static inline const struct in6_addr *rt6_nexthop(const struct rt6_info *rt, + const struct in6_addr *daddr) { if (rt->rt6i_flags & RTF_GATEWAY) return &rt->rt6i_gateway; diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c index 19d27bee285e..1555b0c6f7ec 100644 --- a/net/bluetooth/6lowpan.c +++ b/net/bluetooth/6lowpan.c @@ -160,10 +160,10 @@ static inline struct lowpan_peer *peer_lookup_dst(struct lowpan_btle_dev *dev, struct in6_addr *daddr, struct sk_buff *skb) { - struct lowpan_peer *peer; - struct in6_addr *nexthop; struct rt6_info *rt = (struct rt6_info *)skb_dst(skb); int count = atomic_read(&dev->peer_count); + const struct in6_addr *nexthop; + struct lowpan_peer *peer; BT_DBG("peers %d addr %pI6c rt %p", count, daddr, rt); diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 834475717110..21efcd02f337 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -59,8 +59,8 @@ static int ip6_finish_output2(struct net *net, struct sock *sk, struct sk_buff * { struct dst_entry *dst = skb_dst(skb); struct net_device *dev = dst->dev; + const struct in6_addr *nexthop; struct neighbour *neigh; - struct in6_addr *nexthop; int ret; if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) { diff --git a/net/netfilter/nf_flow_table_ip.c b/net/netfilter/nf_flow_table_ip.c index 241317473114..cdfc33517e85 100644 --- a/net/netfilter/nf_flow_table_ip.c +++ b/net/netfilter/nf_flow_table_ip.c @@ -439,9 +439,9 @@ nf_flow_offload_ipv6_hook(void *priv, struct sk_buff *skb, struct nf_flowtable *flow_table = priv; struct flow_offload_tuple tuple = {}; enum flow_offload_tuple_dir dir; + const struct in6_addr *nexthop; struct flow_offload *flow; struct net_device *outdev; - struct in6_addr *nexthop; struct ipv6hdr *ip6h; struct rt6_info *rt; -- cgit v1.2.3 From 2c6b55f45d53420d8310d41310e0e2cd41fe073f Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 24 Jun 2019 16:01:09 +0200 Subject: ipv6: fix neighbour resolution with raw socket The scenario is the following: the user uses a raw socket to send an ipv6 packet, destinated to a not-connected network, and specify a connected nh. Here is the corresponding python script to reproduce this scenario: import socket IPPROTO_RAW = 255 send_s = socket.socket(socket.AF_INET6, socket.SOCK_RAW, IPPROTO_RAW) # scapy # p = IPv6(src='fd00:100::1', dst='fd00:200::fa')/ICMPv6EchoRequest() # str(p) req = b'`\x00\x00\x00\x00\x08:@\xfd\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\xfd\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfa\x80\x00\x81\xc0\x00\x00\x00\x00' send_s.sendto(req, ('fd00:175::2', 0, 0, 0)) fd00:175::/64 is a connected route and fd00:200::fa is not a connected host. With this scenario, the kernel starts by sending a NS to resolve fd00:175::2. When it receives the NA, it flushes its queue and try to send the initial packet. But instead of sending it, it sends another NS to resolve fd00:200::fa, which obvioulsy fails, thus the packet is dropped. If the user sends again the packet, it now uses the right nh (fd00:175::2). The problem is that ip6_dst_lookup_neigh() uses the rt6i_gateway, which is :: because the associated route is a connected route, thus it uses the dst addr of the packet. Let's use rt6_nexthop() to choose the right nh. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/ipv6/route.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index aade636c6be6..97a843cf164c 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -218,7 +218,8 @@ static struct neighbour *ip6_dst_neigh_lookup(const struct dst_entry *dst, { const struct rt6_info *rt = container_of(dst, struct rt6_info, dst); - return ip6_neigh_lookup(&rt->rt6i_gateway, dst->dev, skb, daddr); + return ip6_neigh_lookup(rt6_nexthop(rt, &in6addr_any), + dst->dev, skb, daddr); } static void ip6_confirm_neigh(const struct dst_entry *dst, const void *daddr) -- cgit v1.2.3 From 25bff6d5478b2a02368097015b7d8eb727c87e16 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Tue, 25 Jun 2019 00:21:45 +0800 Subject: sctp: change to hold sk after auth shkey is created successfully Now in sctp_endpoint_init(), it holds the sk then creates auth shkey. But when the creation fails, it doesn't release the sk, which causes a sk defcnf leak, Here to fix it by only holding the sk when auth shkey is created successfully. Fixes: a29a5bd4f5c3 ("[SCTP]: Implement SCTP-AUTH initializations.") Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com Signed-off-by: Xin Long Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/endpointola.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c index e358437ba29b..69cebb2c998b 100644 --- a/net/sctp/endpointola.c +++ b/net/sctp/endpointola.c @@ -118,10 +118,6 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep, /* Initialize the bind addr area */ sctp_bind_addr_init(&ep->base.bind_addr, 0); - /* Remember who we are attached to. */ - ep->base.sk = sk; - sock_hold(ep->base.sk); - /* Create the lists of associations. */ INIT_LIST_HEAD(&ep->asocs); @@ -154,6 +150,10 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep, ep->prsctp_enable = net->sctp.prsctp_enable; ep->reconf_enable = net->sctp.reconf_enable; + /* Remember who we are attached to. */ + ep->base.sk = sk; + sock_hold(ep->base.sk); + return ep; nomem_shkey: -- cgit v1.2.3 From 89ed5b519004a7706f50b70f611edbd3aaacff2c Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 25 Jun 2019 17:57:49 -0400 Subject: af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET When an application is run that: a) Sets its scheduler to be SCHED_FIFO and b) Opens a memory mapped AF_PACKET socket, and sends frames with the MSG_DONTWAIT flag cleared, its possible for the application to hang forever in the kernel. This occurs because when waiting, the code in tpacket_snd calls schedule, which under normal circumstances allows other tasks to run, including ksoftirqd, which in some cases is responsible for freeing the transmitted skb (which in AF_PACKET calls a destructor that flips the status bit of the transmitted frame back to available, allowing the transmitting task to complete). However, when the calling application is SCHED_FIFO, its priority is such that the schedule call immediately places the task back on the cpu, preventing ksoftirqd from freeing the skb, which in turn prevents the transmitting task from detecting that the transmission is complete. We can fix this by converting the schedule call to a completion mechanism. By using a completion queue, we force the calling task, when it detects there are no more frames to send, to schedule itself off the cpu until such time as the last transmitted skb is freed, allowing forward progress to be made. Tested by myself and the reporter, with good results Change Notes: V1->V2: Enhance the sleep logic to support being interruptible and allowing for honoring to SK_SNDTIMEO (Willem de Bruijn) V2->V3: Rearrage the point at which we wait for the completion queue, to avoid needing to check for ph/skb being null at the end of the loop. Also move the complete call to the skb destructor to avoid needing to modify __packet_set_status. Also gate calling complete on packet_read_pending returning zero to avoid multiple calls to complete. (Willem de Bruijn) Move timeo computation within loop, to re-fetch the socket timeout since we also use the timeo variable to record the return code from the wait_for_complete call (Neil Horman) V3->V4: Willem has requested that the control flow be restored to the previous state. Doing so lets us eliminate the need for the po->wait_on_complete flag variable, and lets us get rid of the packet_next_frame function, but introduces another complexity. Specifically, but using the packet pending count, we can, if an applications calls sendmsg multiple times with MSG_DONTWAIT set, each set of transmitted frames, when complete, will cause tpacket_destruct_skb to issue a complete call, for which there will never be a wait_on_completion call. This imbalance will lead to any future call to wait_for_completion here to return early, when the frames they sent may not have completed. To correct this, we need to re-init the completion queue on every call to tpacket_snd before we enter the loop so as to ensure we wait properly for the frames we send in this iteration. Change the timeout and interrupted gotos to out_put rather than out_status so that we don't try to free a non-existant skb Clean up some extra newlines (Willem de Bruijn) Reviewed-by: Willem de Bruijn Signed-off-by: Neil Horman Reported-by: Matteo Croce Signed-off-by: David S. Miller --- net/packet/af_packet.c | 20 +++++++++++++++++--- net/packet/internal.h | 1 + 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 0b4cf94f0233..5f78df080573 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -2401,6 +2401,9 @@ static void tpacket_destruct_skb(struct sk_buff *skb) ts = __packet_set_timestamp(po, ph, skb); __packet_set_status(po, ph, TP_STATUS_AVAILABLE | ts); + + if (!packet_read_pending(&po->tx_ring)) + complete(&po->skb_completion); } sock_wfree(skb); @@ -2585,7 +2588,7 @@ static int tpacket_parse_header(struct packet_sock *po, void *frame, static int tpacket_snd(struct packet_sock *po, struct msghdr *msg) { - struct sk_buff *skb; + struct sk_buff *skb = NULL; struct net_device *dev; struct virtio_net_hdr *vnet_hdr = NULL; struct sockcm_cookie sockc; @@ -2600,6 +2603,7 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg) int len_sum = 0; int status = TP_STATUS_AVAILABLE; int hlen, tlen, copylen = 0; + long timeo = 0; mutex_lock(&po->pg_vec_lock); @@ -2646,12 +2650,21 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg) if ((size_max > dev->mtu + reserve + VLAN_HLEN) && !po->has_vnet_hdr) size_max = dev->mtu + reserve + VLAN_HLEN; + reinit_completion(&po->skb_completion); + do { ph = packet_current_frame(po, &po->tx_ring, TP_STATUS_SEND_REQUEST); if (unlikely(ph == NULL)) { - if (need_wait && need_resched()) - schedule(); + if (need_wait && skb) { + timeo = sock_sndtimeo(&po->sk, msg->msg_flags & MSG_DONTWAIT); + timeo = wait_for_completion_interruptible_timeout(&po->skb_completion, timeo); + if (timeo <= 0) { + err = !timeo ? -ETIMEDOUT : -ERESTARTSYS; + goto out_put; + } + } + /* check for additional frames */ continue; } @@ -3207,6 +3220,7 @@ static int packet_create(struct net *net, struct socket *sock, int protocol, sock_init_data(sock, sk); po = pkt_sk(sk); + init_completion(&po->skb_completion); sk->sk_family = PF_PACKET; po->num = proto; po->xmit = dev_queue_xmit; diff --git a/net/packet/internal.h b/net/packet/internal.h index 3bb7c5fb3bff..c70a2794456f 100644 --- a/net/packet/internal.h +++ b/net/packet/internal.h @@ -128,6 +128,7 @@ struct packet_sock { unsigned int tp_hdrlen; unsigned int tp_reserve; unsigned int tp_tstamp; + struct completion skb_completion; struct net_device __rcu *cached_dev; int (*xmit)(struct sk_buff *skb); struct packet_type prot_hook ____cacheline_aligned_in_smp; -- cgit v1.2.3