From ca22a5e4d70620b7f3d809e424daa5214b0aa00d Mon Sep 17 00:00:00 2001 From: rajesh.shah@intel.com Date: Mon, 31 Oct 2005 16:20:08 -0800 Subject: [PATCH] pciehp: remove redundant data structures State information is currently stored in per-slot as well as per-pci-function data structures in pciehp. There's a lot of overlap in the information kept, and some of it is never used. This patch consolidates the state information to per-slot and eliminates unused data structures. The biggest change is to eliminate the pci_func structure and the code around managing its lists. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/pciehp.h | 30 +-- drivers/pci/hotplug/pciehp_core.c | 29 --- drivers/pci/hotplug/pciehp_ctrl.c | 391 ++++---------------------------------- drivers/pci/hotplug/pciehp_pci.c | 349 +++------------------------------- 4 files changed, 65 insertions(+), 734 deletions(-) diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index e9c09566f851..3e17e3d4dd65 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -56,25 +56,11 @@ struct hotplug_params { u8 enable_perr; }; -struct pci_func { - struct pci_func *next; - u8 bus; - u8 device; - u8 function; - u8 is_a_board; - u16 status; - u8 configured; - u8 switch_save; - u8 presence_save; - u16 reserved2; - u32 config_space[0x20]; - struct pci_dev* pci_dev; -}; - struct slot { struct slot *next; u8 bus; u8 device; + u16 status; u32 number; u8 is_a_board; u8 configured; @@ -177,9 +163,6 @@ struct controller { * error Messages */ #define msg_initialization_err "Initialization failure, error=%d\n" -#define msg_HPC_rev_error "Unsupported revision of the PCI hot plug controller found.\n" -#define msg_HPC_non_pcie "The PCI hot plug controller is not supported by this driver.\n" -#define msg_HPC_not_supported "This system is not supported by this version of pciephd module. Upgrade to a newer version of pciehpd\n" #define msg_button_on "PCI slot #%d - powering on due to button press.\n" #define msg_button_off "PCI slot #%d - powering off due to button press.\n" #define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n" @@ -188,8 +171,6 @@ struct controller { /* controller functions */ extern int pciehp_event_start_thread (void); extern void pciehp_event_stop_thread (void); -extern struct pci_func *pciehp_slot_create (unsigned char busnumber); -extern struct pci_func *pciehp_slot_find (unsigned char bus, unsigned char device, unsigned char index); extern int pciehp_enable_slot (struct slot *slot); extern int pciehp_disable_slot (struct slot *slot); @@ -200,12 +181,8 @@ extern u8 pciehp_handle_power_fault (u8 hp_slot, void *inst_id); /* extern void long_delay (int delay); */ /* pci functions */ -extern int pciehp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num); -/*extern int pciehp_get_bus_dev (struct controller *ctrl, u8 *bus_num, u8 *dev_num, struct slot *slot);*/ -extern int pciehp_save_config (struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num); -extern int pciehp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot); -extern int pciehp_configure_device (struct slot *ctrl); -extern int pciehp_unconfigure_device (struct pci_func* func); +extern int pciehp_configure_device (struct slot *p_slot); +extern int pciehp_unconfigure_device (struct slot *p_slot); extern int get_hp_hw_control_from_firmware(struct pci_dev *dev); extern void get_hp_params_from_firmware(struct pci_dev *dev, struct hotplug_params *hpp); @@ -214,7 +191,6 @@ extern void get_hp_params_from_firmware(struct pci_dev *dev, /* Global variables */ extern struct controller *pciehp_ctrl_list; -extern struct pci_func *pciehp_slot_list[256]; /* Inline functions */ diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index e20cf8e42bd9..be608563e8b6 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -46,7 +46,6 @@ int pciehp_debug; int pciehp_poll_mode; int pciehp_poll_time; struct controller *pciehp_ctrl_list; -struct pci_func *pciehp_slot_list[256]; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink , Greg Kroah-Hartman , Dely Sy " @@ -422,15 +421,6 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ first_device_num = ctrl->slot_device_offset; num_ctlr_slots = ctrl->num_slots; - /* Store PCI Config Space for all devices on this bus */ - dbg("%s: Before calling pciehp_save_config, ctrl->bus %x,ctrl->slot_bus %x\n", - __FUNCTION__,ctrl->bus, ctrl->slot_bus); - rc = pciehp_save_config(ctrl, ctrl->slot_bus, num_ctlr_slots, first_device_num); - if (rc) { - err("%s: unable to save PCI configuration data, error %d\n", __FUNCTION__, rc); - goto err_out_free_ctrl_bus; - } - ctrl->add_support = 1; /* Setup the slot information structures */ @@ -491,7 +481,6 @@ err_out_none: static int pcie_start_thread(void) { - int loop; int retval = 0; dbg("Initialize + Start the notification/polling mechanism \n"); @@ -502,20 +491,11 @@ static int pcie_start_thread(void) return retval; } - dbg("Initialize slot lists\n"); - /* One slot list for each bus in the system */ - for (loop = 0; loop < 256; loop++) { - pciehp_slot_list[loop] = NULL; - } - return retval; } static void __exit unload_pciehpd(void) { - struct pci_func *next; - struct pci_func *TempSlot; - int loop; struct controller *ctrl; struct controller *tctrl; @@ -534,15 +514,6 @@ static void __exit unload_pciehpd(void) kfree(tctrl); } - for (loop = 0; loop < 256; loop++) { - next = pciehp_slot_list[loop]; - while (next != NULL) { - TempSlot = next; - next = next->next; - kfree(TempSlot); - } - } - /* Stop the notification mechanism */ pciehp_event_stop_thread(); diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index d07d4194bc29..b60e4973289c 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -55,19 +55,16 @@ u8 pciehp_handle_attention_button(u8 hp_slot, void *inst_id) struct slot *p_slot; u8 rc = 0; u8 getstatus; - struct pci_func *func; struct event_info *taskInfo; /* Attention Button Change */ dbg("pciehp: Attention button interrupt received.\n"); - func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread what to do */ taskInfo = &(ctrl->event_queue[ctrl->next_event]); p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); ctrl->next_event = (ctrl->next_event + 1) % 10; @@ -112,14 +109,11 @@ u8 pciehp_handle_switch_change(u8 hp_slot, void *inst_id) struct slot *p_slot; u8 rc = 0; u8 getstatus; - struct pci_func *func; struct event_info *taskInfo; /* Switch Change */ dbg("pciehp: Switch interrupt received.\n"); - func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread * what to do */ @@ -129,7 +123,7 @@ u8 pciehp_handle_switch_change(u8 hp_slot, void *inst_id) rc++; p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (getstatus) { @@ -137,14 +131,14 @@ u8 pciehp_handle_switch_change(u8 hp_slot, void *inst_id) * Switch opened */ info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot); - func->switch_save = 0; + p_slot->switch_save = 0; taskInfo->event_type = INT_SWITCH_OPEN; } else { /* * Switch closed */ info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot); - func->switch_save = 0x10; + p_slot->switch_save = 0x10; taskInfo->event_type = INT_SWITCH_CLOSE; } @@ -159,14 +153,11 @@ u8 pciehp_handle_presence_change(u8 hp_slot, void *inst_id) struct controller *ctrl = (struct controller *) inst_id; struct slot *p_slot; u8 rc = 0; - struct pci_func *func; struct event_info *taskInfo; /* Presence Change */ dbg("pciehp: Presence/Notify input change.\n"); - func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread * what to do */ @@ -180,8 +171,8 @@ u8 pciehp_handle_presence_change(u8 hp_slot, void *inst_id) /* Switch is open, assume a presence change * Save the presence state */ - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); - if (func->presence_save) { + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); + if (p_slot->presence_save) { /* * Card Present */ @@ -206,14 +197,11 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) struct controller *ctrl = (struct controller *) inst_id; struct slot *p_slot; u8 rc = 0; - struct pci_func *func; struct event_info *taskInfo; /* power fault */ dbg("pciehp: Power fault interrupt received.\n"); - func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* this is the structure that tells the worker thread * what to do */ @@ -229,7 +217,7 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) * power fault Cleared */ info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot); - func->status = 0x00; + p_slot->status = 0x00; taskInfo->event_type = INT_POWER_FAULT_CLEAR; } else { /* @@ -238,7 +226,7 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot); taskInfo->event_type = INT_POWER_FAULT; /* set power fault status for this board */ - func->status = 0xFF; + p_slot->status = 0xFF; info("power fault bit %x set\n", hp_slot); } if (rc) @@ -247,187 +235,6 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) return rc; } -/** - * pciehp_slot_create - Creates a node and adds it to the proper bus. - * @busnumber - bus where new node is to be located - * - * Returns pointer to the new node or NULL if unsuccessful - */ -struct pci_func *pciehp_slot_create(u8 busnumber) -{ - struct pci_func *new_slot; - struct pci_func *next; - dbg("%s: busnumber %x\n", __FUNCTION__, busnumber); - new_slot = kmalloc(sizeof(struct pci_func), GFP_KERNEL); - - if (new_slot == NULL) - return new_slot; - - memset(new_slot, 0, sizeof(struct pci_func)); - - new_slot->next = NULL; - new_slot->configured = 1; - - if (pciehp_slot_list[busnumber] == NULL) { - pciehp_slot_list[busnumber] = new_slot; - } else { - next = pciehp_slot_list[busnumber]; - while (next->next != NULL) - next = next->next; - next->next = new_slot; - } - return new_slot; -} - - -/** - * slot_remove - Removes a node from the linked list of slots. - * @old_slot: slot to remove - * - * Returns 0 if successful, !0 otherwise. - */ -static int slot_remove(struct pci_func * old_slot) -{ - struct pci_func *next; - - if (old_slot == NULL) - return 1; - - next = pciehp_slot_list[old_slot->bus]; - - if (next == NULL) - return 1; - - if (next == old_slot) { - pciehp_slot_list[old_slot->bus] = old_slot->next; - kfree(old_slot); - return 0; - } - - while ((next->next != old_slot) && (next->next != NULL)) { - next = next->next; - } - - if (next->next == old_slot) { - next->next = old_slot->next; - kfree(old_slot); - return 0; - } else - return 2; -} - - -/** - * bridge_slot_remove - Removes a node from the linked list of slots. - * @bridge: bridge to remove - * - * Returns 0 if successful, !0 otherwise. - */ -static int bridge_slot_remove(struct pci_func *bridge) -{ - u8 subordinateBus, secondaryBus; - u8 tempBus; - struct pci_func *next; - - if (bridge == NULL) - return 1; - - secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF; - subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF; - - for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) { - next = pciehp_slot_list[tempBus]; - - while (!slot_remove(next)) { - next = pciehp_slot_list[tempBus]; - } - } - - next = pciehp_slot_list[bridge->bus]; - - if (next == NULL) { - return 1; - } - - if (next == bridge) { - pciehp_slot_list[bridge->bus] = bridge->next; - kfree(bridge); - return 0; - } - - while ((next->next != bridge) && (next->next != NULL)) { - next = next->next; - } - - if (next->next == bridge) { - next->next = bridge->next; - kfree(bridge); - return 0; - } else - return 2; -} - - -/** - * pciehp_slot_find - Looks for a node by bus, and device, multiple functions accessed - * @bus: bus to find - * @device: device to find - * @index: is 0 for first function found, 1 for the second... - * - * Returns pointer to the node if successful, %NULL otherwise. - */ -struct pci_func *pciehp_slot_find(u8 bus, u8 device, u8 index) -{ - int found = -1; - struct pci_func *func; - - func = pciehp_slot_list[bus]; - dbg("%s: bus %x device %x index %x\n", - __FUNCTION__, bus, device, index); - if (func != NULL) { - dbg("%s: func-> bus %x device %x function %x pci_dev %p\n", - __FUNCTION__, func->bus, func->device, func->function, - func->pci_dev); - } else - dbg("%s: func == NULL\n", __FUNCTION__); - - if ((func == NULL) || ((func->device == device) && (index == 0))) - return func; - - if (func->device == device) - found++; - - while (func->next != NULL) { - func = func->next; - - dbg("%s: In while loop, func-> bus %x device %x function %x pci_dev %p\n", - __FUNCTION__, func->bus, func->device, func->function, - func->pci_dev); - if (func->device == device) - found++; - dbg("%s: while loop, found %d, index %d\n", __FUNCTION__, - found, index); - - if ((found == index) || (func->function == index)) { - dbg("%s: Found bus %x dev %x func %x\n", __FUNCTION__, - func->bus, func->device, func->function); - return func; - } - } - - return NULL; -} - -static int is_bridge(struct pci_func * func) -{ - /* Check the header type */ - if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01) - return 1; - else - return 0; -} - - /* The following routines constitute the bulk of the hotplug controller logic */ @@ -472,17 +279,16 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot) * Configures board * */ -static u32 board_added(struct pci_func * func, struct controller * ctrl) +static u32 board_added(struct slot *p_slot) { u8 hp_slot; u32 temp_register = 0xFFFFFFFF; u32 rc = 0; - struct slot *p_slot; + struct controller *ctrl = p_slot->ctrl; - p_slot = pciehp_find_slot(ctrl, func->device); - hp_slot = func->device - ctrl->slot_device_offset; + hp_slot = p_slot->device - ctrl->slot_device_offset; - dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot); + dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, p_slot->device, ctrl->slot_device_offset, hp_slot); /* Wait for exclusive access to hardware */ down(&ctrl->crit_sect); @@ -522,15 +328,15 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) return rc; } - dbg("%s: func status = %x\n", __FUNCTION__, func->status); + dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status); /* Check for a power fault */ - if (func->status == 0xFF) { + if (p_slot->status == 0xFF) { /* power fault occurred, but it was benign */ temp_register = 0xFFFFFFFF; dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register); rc = POWER_FAILURE; - func->status = 0; + p_slot->status = 0; goto err_exit; } @@ -541,10 +347,9 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) goto err_exit; } - pciehp_save_slot_config(ctrl, func); - func->status = 0; - func->switch_save = 0x10; - func->is_a_board = 0x01; + p_slot->status = 0; + p_slot->switch_save = 0x10; + p_slot->is_a_board = 0x01; /* * Some PCI Express root ports require fixup after hot-plug operation. @@ -575,30 +380,27 @@ err_exit: * remove_board - Turns off slot and LED's * */ -static u32 remove_board(struct pci_func *func, struct controller *ctrl) +static u32 remove_board(struct slot *p_slot) { u8 device; u8 hp_slot; u32 rc; - struct slot *p_slot; - - if (func == NULL) - return 1; + struct controller *ctrl = p_slot->ctrl; - if (pciehp_unconfigure_device(func)) + if (pciehp_unconfigure_device(p_slot)) return 1; - device = func->device; + device = p_slot->device; - hp_slot = func->device - ctrl->slot_device_offset; + hp_slot = p_slot->device - ctrl->slot_device_offset; p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); /* Change status to shutdown */ - if (func->is_a_board) - func->status = 0x01; - func->configured = 0; + if (p_slot->is_a_board) + p_slot->status = 0x01; + p_slot->configured = 0; /* Wait for exclusive access to hardware */ down(&ctrl->crit_sect); @@ -626,35 +428,8 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl) /* Done with exclusive hardware access */ up(&ctrl->crit_sect); - if (ctrl->add_support) { - while (func) { - if (is_bridge(func)) { - dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", - ctrl->seg, func->bus, func->device, func->function); - bridge_slot_remove(func); - } else { - dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", - ctrl->seg, func->bus, func->device, func->function); - slot_remove(func); - } - - func = pciehp_slot_find(ctrl->slot_bus, device, 0); - } - - /* Setup slot structure with entry for empty slot */ - func = pciehp_slot_create(ctrl->slot_bus); - - if (func == NULL) { - return 1; - } - - func->bus = ctrl->slot_bus; - func->device = device; - func->function = 0; - func->configured = 0; - func->switch_save = 0x10; - func->is_a_board = 0; - } + p_slot->switch_save = 0x10; + p_slot->is_a_board = 0; return 0; } @@ -851,7 +626,6 @@ static void interrupt_event_handler(struct controller *ctrl) { int loop = 0; int change = 1; - struct pci_func *func; u8 hp_slot; u8 getstatus; struct slot *p_slot; @@ -863,11 +637,9 @@ static void interrupt_event_handler(struct controller *ctrl) if (ctrl->event_queue[loop].event_type != 0) { hp_slot = ctrl->event_queue[loop].hp_slot; - func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - dbg("hp_slot %d, func %p, p_slot %p\n", hp_slot, func, p_slot); + dbg("hp_slot %d, p_slot %p\n", hp_slot, p_slot); if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) { dbg("button cancel\n"); @@ -1015,13 +787,6 @@ int pciehp_enable_slot(struct slot *p_slot) { u8 getstatus = 0; int rc; - struct pci_func *func; - - func = pciehp_slot_find(p_slot->bus, p_slot->device, 0); - if (!func) { - dbg("%s: Error! slot NULL\n", __FUNCTION__); - return 1; - } /* Check to see if (latch closed, card present, power off) */ down(&p_slot->ctrl->crit_sect); @@ -1051,45 +816,21 @@ int pciehp_enable_slot(struct slot *p_slot) } up(&p_slot->ctrl->crit_sect); - slot_remove(func); - - func = pciehp_slot_create(p_slot->bus); - if (func == NULL) - return 1; - - func->bus = p_slot->bus; - func->device = p_slot->device; - func->function = 0; - func->configured = 0; - func->is_a_board = 1; + p_slot->configured = 0; + p_slot->is_a_board = 1; /* We have to save the presence info for these slots */ - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - func->switch_save = !getstatus? 0x10:0; + p_slot->switch_save = !getstatus? 0x10:0; - rc = board_added(func, p_slot->ctrl); + rc = board_added(p_slot); if (rc) { - if (is_bridge(func)) - bridge_slot_remove(func); - else - slot_remove(func); - - /* Setup slot structure with entry for empty slot */ - func = pciehp_slot_create(p_slot->bus); - if (func == NULL) - return 1; /* Out of memory */ - - func->bus = p_slot->bus; - func->device = p_slot->device; - func->function = 0; - func->configured = 0; - func->is_a_board = 1; - /* We have to save the presence info for these slots */ - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_adapter_status(p_slot, + &(p_slot->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - func->switch_save = !getstatus? 0x10:0; + p_slot->switch_save = !getstatus? 0x10:0; } if (p_slot) @@ -1101,14 +842,8 @@ int pciehp_enable_slot(struct slot *p_slot) int pciehp_disable_slot(struct slot *p_slot) { - u8 class_code, header_type, BCR; - u8 index = 0; u8 getstatus = 0; - u32 rc = 0; int ret = 0; - unsigned int devfn; - struct pci_bus *pci_bus = p_slot->ctrl->pci_dev->subordinate; - struct pci_func *func; if (!p_slot->ctrl) return 1; @@ -1145,54 +880,8 @@ int pciehp_disable_slot(struct slot *p_slot) up(&p_slot->ctrl->crit_sect); - func = pciehp_slot_find(p_slot->bus, p_slot->device, index++); - - /* Make sure there are no video controllers here - * for all func of p_slot - */ - while (func && !rc) { - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - /* Check the Class Code */ - rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); - if (rc) - return rc; - - if (class_code == PCI_BASE_CLASS_DISPLAY) { - /* Display/Video adapter (not supported) */ - rc = REMOVE_NOT_SUPPORTED; - } else { - /* See if it's a bridge */ - rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - if (rc) - return rc; - - /* If it's a bridge, check the VGA Enable bit */ - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { - rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR); - if (rc) - return rc; - - /* If the VGA Enable bit is set, remove isn't supported */ - if (BCR & PCI_BRIDGE_CTL_VGA) { - rc = REMOVE_NOT_SUPPORTED; - } - } - } - - func = pciehp_slot_find(p_slot->bus, p_slot->device, index++); - } - - func = pciehp_slot_find(p_slot->bus, p_slot->device, 0); - if ((func != NULL) && !rc) { - rc = remove_board(func, p_slot->ctrl); - } else if (!rc) - rc = 1; - - if (p_slot) - update_slot_info(p_slot); - - return rc; + ret = remove_board(p_slot); + update_slot_info(p_slot); + return ret; } diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index db59a06ab0b4..1d185c1bc77a 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -101,346 +101,41 @@ int pciehp_configure_device(struct slot *p_slot) return 0; } -int pciehp_unconfigure_device(struct pci_func* func) +int pciehp_unconfigure_device(struct slot *p_slot) { int rc = 0; int j; - struct pci_bus *pbus; + u8 bctl = 0; - dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus, - func->device, func->function); - pbus = func->pci_dev->bus; + dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus, + p_slot->device); for (j=0; j<8 ; j++) { - struct pci_dev* temp = pci_find_slot(func->bus, - (func->device << 3) | j); - if (temp) { - pci_remove_bus_device(temp); + struct pci_dev* temp = pci_find_slot(p_slot->bus, + (p_slot->device << 3) | j); + if (!temp) + continue; + if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) { + err("Cannot remove display device %s\n", + pci_name(temp)); + continue; + } + if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl); + if (bctl & PCI_BRIDGE_CTL_VGA) { + err("Cannot remove display device %s\n", + pci_name(temp)); + continue; + } } + pci_remove_bus_device(temp); } /* * Some PCI Express root ports require fixup after hot-plug operation. */ if (pcie_mch_quirk) - pci_fixup_device(pci_fixup_final, pbus->self); + pci_fixup_device(pci_fixup_final, p_slot->ctrl->pci_dev); return rc; } -/* - * pciehp_save_config - * - * Reads configuration for all slots in a PCI bus and saves info. - * - * Note: For non-hot plug busses, the slot # saved is the device # - * - * returns 0 if success - */ -int pciehp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num) -{ - int rc; - u8 class_code; - u8 header_type; - u32 ID; - u8 secondary_bus; - struct pci_func *new_slot; - int sub_bus; - int max_functions; - int function; - u8 DevError; - int device = 0; - int cloop = 0; - int stop_it; - int index; - int is_hot_plug = num_ctlr_slots || first_device_num; - struct pci_bus lpci_bus, *pci_bus; - int FirstSupported, LastSupported; - - dbg("%s: Enter\n", __FUNCTION__); - - memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - - dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__, - num_ctlr_slots, first_device_num); - - /* Decide which slots are supported */ - if (is_hot_plug) { - /********************************* - * is_hot_plug is the slot mask - *********************************/ - FirstSupported = first_device_num; - LastSupported = FirstSupported + num_ctlr_slots - 1; - } else { - FirstSupported = 0; - LastSupported = 0x1F; - } - - dbg("FirstSupported = %d, LastSupported = %d\n", FirstSupported, - LastSupported); - - /* Save PCI configuration space for all devices in supported slots */ - dbg("%s: pci_bus->number = %x\n", __FUNCTION__, pci_bus->number); - pci_bus->number = busnumber; - dbg("%s: bus = %x, dev = %x\n", __FUNCTION__, busnumber, device); - for (device = FirstSupported; device <= LastSupported; device++) { - ID = 0xFFFFFFFF; - rc = pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0), - PCI_VENDOR_ID, &ID); - - if (ID != 0xFFFFFFFF) { /* device in slot */ - dbg("%s: ID = %x\n", __FUNCTION__, ID); - rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0), - 0x0B, &class_code); - if (rc) - return rc; - - rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0), - PCI_HEADER_TYPE, &header_type); - if (rc) - return rc; - - dbg("class_code = %x, header_type = %x\n", class_code, header_type); - - /* If multi-function device, set max_functions to 8 */ - if (header_type & 0x80) - max_functions = 8; - else - max_functions = 1; - - function = 0; - - do { - DevError = 0; - dbg("%s: In do loop\n", __FUNCTION__); - - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* P-P Bridge */ - /* Recurse the subordinate bus - * get the subordinate bus number - */ - rc = pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(device, function), - PCI_SECONDARY_BUS, &secondary_bus); - if (rc) { - return rc; - } else { - sub_bus = (int) secondary_bus; - - /* Save secondary bus cfg spc with this recursive call. */ - rc = pciehp_save_config(ctrl, sub_bus, 0, 0); - if (rc) - return rc; - } - } - - index = 0; - new_slot = pciehp_slot_find(busnumber, device, index++); - - dbg("%s: new_slot = %p bus %x dev %x fun %x\n", - __FUNCTION__, new_slot, busnumber, device, index-1); - - while (new_slot && (new_slot->function != (u8) function)) { - new_slot = pciehp_slot_find(busnumber, device, index++); - dbg("%s: while loop, new_slot = %p bus %x dev %x fun %x\n", - __FUNCTION__, new_slot, busnumber, device, index-1); - } - if (!new_slot) { - /* Setup slot structure. */ - new_slot = pciehp_slot_create(busnumber); - dbg("%s: if, new_slot = %p bus %x dev %x fun %x\n", - __FUNCTION__, new_slot, busnumber, device, function); - - if (new_slot == NULL) - return(1); - } - - new_slot->bus = (u8) busnumber; - new_slot->device = (u8) device; - new_slot->function = (u8) function; - new_slot->is_a_board = 1; - new_slot->switch_save = 0x10; - /* In case of unsupported board */ - new_slot->status = DevError; - new_slot->pci_dev = pci_find_slot(new_slot->bus, - (new_slot->device << 3) | new_slot->function); - dbg("new_slot->pci_dev = %p\n", new_slot->pci_dev); - - for (cloop = 0; cloop < 0x20; cloop++) { - rc = pci_bus_read_config_dword(pci_bus, - PCI_DEVFN(device, function), - cloop << 2, - (u32 *) &(new_slot->config_space [cloop])); - /* dbg("new_slot->config_space[%x] = %x\n", - cloop, new_slot->config_space[cloop]); */ - if (rc) - return rc; - } - - function++; - - stop_it = 0; - - /* this loop skips to the next present function - * reading in Class Code and Header type. - */ - - while ((function < max_functions)&&(!stop_it)) { - dbg("%s: In while loop \n", __FUNCTION__); - rc = pci_bus_read_config_dword(pci_bus, - PCI_DEVFN(device, function), - PCI_VENDOR_ID, &ID); - - if (ID == 0xFFFFFFFF) { /* nothing there. */ - function++; - dbg("Nothing there\n"); - } else { /* Something there */ - rc = pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(device, function), - 0x0B, &class_code); - if (rc) - return rc; - - rc = pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(device, function), - PCI_HEADER_TYPE, &header_type); - if (rc) - return rc; - - dbg("class_code = %x, header_type = %x\n", class_code, header_type); - stop_it++; - } - } - - } while (function < max_functions); - /* End of IF (device in slot?) */ - } else if (is_hot_plug) { - /* Setup slot structure with entry for empty slot */ - new_slot = pciehp_slot_create(busnumber); - - if (new_slot == NULL) { - return(1); - } - dbg("new_slot = %p, bus = %x, dev = %x, fun = %x\n", new_slot, - new_slot->bus, new_slot->device, new_slot->function); - - new_slot->bus = (u8) busnumber; - new_slot->device = (u8) device; - new_slot->function = 0; - new_slot->is_a_board = 0; - new_slot->presence_save = 0; - new_slot->switch_save = 0; - } - } /* End of FOR loop */ - - dbg("%s: Exit\n", __FUNCTION__); - return(0); -} - - -/* - * pciehp_save_slot_config - * - * Saves configuration info for all PCI devices in a given slot - * including subordinate busses. - * - * returns 0 if success - */ -int pciehp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot) -{ - int rc; - u8 class_code; - u8 header_type; - u32 ID; - u8 secondary_bus; - int sub_bus; - int max_functions; - int function; - int cloop = 0; - int stop_it; - struct pci_bus lpci_bus, *pci_bus; - memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = new_slot->bus; - - ID = 0xFFFFFFFF; - - pci_bus_read_config_dword(pci_bus, PCI_DEVFN(new_slot->device, 0), - PCI_VENDOR_ID, &ID); - - if (ID != 0xFFFFFFFF) { /* device in slot */ - pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0), - 0x0B, &class_code); - - pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0), - PCI_HEADER_TYPE, &header_type); - - if (header_type & 0x80) /* Multi-function device */ - max_functions = 8; - else - max_functions = 1; - - function = 0; - - do { - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */ - /* Recurse the subordinate bus */ - pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(new_slot->device, function), - PCI_SECONDARY_BUS, &secondary_bus); - - sub_bus = (int) secondary_bus; - - /* Save the config headers for the secondary bus. */ - rc = pciehp_save_config(ctrl, sub_bus, 0, 0); - - if (rc) - return rc; - - } /* End of IF */ - - new_slot->status = 0; - - for (cloop = 0; cloop < 0x20; cloop++) { - pci_bus_read_config_dword(pci_bus, - PCI_DEVFN(new_slot->device, function), - cloop << 2, - (u32 *) &(new_slot->config_space [cloop])); - } - - function++; - - stop_it = 0; - - /* this loop skips to the next present function - * reading in the Class Code and the Header type. - */ - - while ((function < max_functions) && (!stop_it)) { - pci_bus_read_config_dword(pci_bus, - PCI_DEVFN(new_slot->device, function), - PCI_VENDOR_ID, &ID); - - if (ID == 0xFFFFFFFF) { /* nothing there. */ - function++; - } else { /* Something there */ - pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(new_slot->device, function), - 0x0B, &class_code); - - pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(new_slot->device, function), - PCI_HEADER_TYPE, &header_type); - - stop_it++; - } - } - - } while (function < max_functions); - } /* End of IF (device in slot?) */ - else { - return 2; - } - - return 0; -} - -- cgit v1.2.3