From d35bc1bd18ab9e986cfb67c5a281a70cfd717f05 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 May 2011 02:28:45 -0700 Subject: isci: uplevel phy infrastructure Merge core/scic_sds_phy.[ch] into phy.[ch] Reported-by: Christoph Hellwig Signed-off-by: Dan Williams --- drivers/scsi/isci/Makefile | 1 - drivers/scsi/isci/core/scic_phy.h | 302 --- drivers/scsi/isci/core/scic_port.h | 2 +- drivers/scsi/isci/core/scic_sds_phy.c | 2277 -------------------- drivers/scsi/isci/core/scic_sds_phy.h | 439 ---- drivers/scsi/isci/core/scic_sds_port.c | 2 - .../isci/core/scic_sds_port_configuration_agent.h | 1 - drivers/scsi/isci/phy.c | 2213 ++++++++++++++++++- drivers/scsi/isci/phy.h | 574 ++++- drivers/scsi/isci/port.c | 2 - drivers/scsi/isci/remote_device.c | 2 - 11 files changed, 2784 insertions(+), 3031 deletions(-) delete mode 100644 drivers/scsi/isci/core/scic_phy.h delete mode 100644 drivers/scsi/isci/core/scic_sds_phy.c delete mode 100644 drivers/scsi/isci/core/scic_sds_phy.h diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index a7d1eb33eca2..2830a97a822a 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -12,4 +12,3 @@ isci-objs := init.o phy.o request.o sata.o \ smp_request.o \ core/scic_sds_port.o \ core/scic_sds_port_configuration_agent.o \ - core/scic_sds_phy.o \ diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h deleted file mode 100644 index f046b4af4b8d..000000000000 --- a/drivers/scsi/isci/core/scic_phy.h +++ /dev/null @@ -1,302 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_PHY_H_ -#define _SCIC_PHY_H_ - -/** - * This file contains all of the interface methods that can be called by an - * SCIC user on a phy (SAS or SATA) object. - * - * - */ - - -#include -#include - -struct scic_sds_phy; -struct scic_sds_port; - - -enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy); - -struct scic_phy_cap { - union { - struct { - /* - * The SAS specification indicates the start bit shall - * always be set to - * 1. This implementation will have the start bit set - * to 0 if the PHY CAPABILITIES were either not - * received or speed negotiation failed. - */ - u8 start:1; - u8 tx_ssc_type:1; - u8 res1:2; - u8 req_logical_linkrate:4; - - u32 gen1_no_ssc:1; - u32 gen1_ssc:1; - u32 gen2_no_ssc:1; - u32 gen2_ssc:1; - u32 gen3_no_ssc:1; - u32 gen3_ssc:1; - u32 res2:17; - u32 parity:1; - }; - u32 all; - }; -} __packed; - -/* this data structure reflects the link layer transmit identification reg */ -struct scic_phy_proto { - union { - struct { - u16 _r_a:1; - u16 smp_iport:1; - u16 stp_iport:1; - u16 ssp_iport:1; - u16 _r_b:4; - u16 _r_c:1; - u16 smp_tport:1; - u16 stp_tport:1; - u16 ssp_tport:1; - u16 _r_d:4; - }; - u16 all; - }; -} __packed; - - -/** - * struct scic_phy_properties - This structure defines the properties common to - * all phys that can be retrieved. - * - * - */ -struct scic_phy_properties { - /** - * This field specifies the port that currently contains the - * supplied phy. This field may be set to NULL - * if the phy is not currently contained in a port. - */ - struct scic_sds_port *owning_port; - - /** - * This field specifies the link rate at which the phy is - * currently operating. - */ - enum sas_linkrate negotiated_link_rate; - - /** - * This field specifies the index of the phy in relation to other - * phys within the controller. This index is zero relative. - */ - u8 index; -}; - -/** - * struct scic_sas_phy_properties - This structure defines the properties, - * specific to a SAS phy, that can be retrieved. - * - * - */ -struct scic_sas_phy_properties { - /** - * This field delineates the Identify Address Frame received - * from the remote end point. - */ - struct sas_identify_frame rcvd_iaf; - - /** - * This field delineates the Phy capabilities structure received - * from the remote end point. - */ - struct scic_phy_cap rcvd_cap; - -}; - -/** - * struct scic_sata_phy_properties - This structure defines the properties, - * specific to a SATA phy, that can be retrieved. - * - * - */ -struct scic_sata_phy_properties { - /** - * This field delineates the signature FIS received from the - * attached target. - */ - struct dev_to_host_fis signature_fis; - - /** - * This field specifies to the user if a port selector is connected - * on the specified phy. - */ - bool is_port_selector_present; - -}; - -/** - * enum scic_phy_counter_id - This enumeration depicts the various pieces of - * optional information that can be retrieved for a specific phy. - * - * - */ -enum scic_phy_counter_id { - /** - * This PHY information field tracks the number of frames received. - */ - SCIC_PHY_COUNTER_RECEIVED_FRAME, - - /** - * This PHY information field tracks the number of frames transmitted. - */ - SCIC_PHY_COUNTER_TRANSMITTED_FRAME, - - /** - * This PHY information field tracks the number of DWORDs received. - */ - SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD, - - /** - * This PHY information field tracks the number of DWORDs transmitted. - */ - SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD, - - /** - * This PHY information field tracks the number of times DWORD - * synchronization was lost. - */ - SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR, - - /** - * This PHY information field tracks the number of received DWORDs with - * running disparity errors. - */ - SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR, - - /** - * This PHY information field tracks the number of received frames with a - * CRC error (not including short or truncated frames). - */ - SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR, - - /** - * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) - * primitives received. - */ - SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT, - - /** - * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) - * primitives transmitted. - */ - SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT, - - /** - * This PHY information field tracks the number of times the inactivity - * timer for connections on the phy has been utilized. - */ - SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED, - - /** - * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) - * primitives received. - */ - SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT, - - /** - * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) - * primitives transmitted. - */ - SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT, - - /** - * This PHY information field tracks the number of CREDIT BLOCKED - * primitives received. - * @note Depending on remote device implementation, credit blocks - * may occur regularly. - */ - SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED, - - /** - * This PHY information field contains the number of short frames - * received. A short frame is simply a frame smaller then what is - * allowed by either the SAS or SATA specification. - */ - SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME, - - /** - * This PHY information field contains the number of frames received after - * credit has been exhausted. - */ - SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT, - - /** - * This PHY information field contains the number of frames received after - * a DONE has been received. - */ - SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE, - - /** - * This PHY information field contains the number of times the phy - * failed to achieve DWORD synchronization during speed negotiation. - */ - SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR -}; - -#endif /* _SCIC_PHY_H_ */ diff --git a/drivers/scsi/isci/core/scic_port.h b/drivers/scsi/isci/core/scic_port.h index 51e7eede5c88..431dbd2093f3 100644 --- a/drivers/scsi/isci/core/scic_port.h +++ b/drivers/scsi/isci/core/scic_port.h @@ -58,7 +58,7 @@ #include "isci.h" #include "sas.h" -#include "scic_phy.h" +#include "phy.h" struct scic_sds_port; diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c deleted file mode 100644 index 150509b0c69e..000000000000 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ /dev/null @@ -1,2277 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include "sas.h" -#include "host.h" -#include "state_machine.h" -#include "scic_phy.h" -#include "scic_sds_phy.h" -#include "scic_sds_port.h" -#include "remote_node_context.h" -#include "scu_event_codes.h" -#include "timers.h" - -#define SCIC_SDS_PHY_MIN_TIMER_COUNT (SCI_MAX_PHYS) -#define SCIC_SDS_PHY_MAX_TIMER_COUNT (SCI_MAX_PHYS) - -/* Maximum arbitration wait time in micro-seconds */ -#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700) - -enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy) -{ - return sci_phy->max_negotiated_speed; -} - -/* - * ***************************************************************************** - * * SCIC SDS PHY Internal Methods - * ***************************************************************************** */ - -/** - * This method will initialize the phy transport layer registers - * @sci_phy: - * @transport_layer_registers - * - * enum sci_status - */ -static enum sci_status scic_sds_phy_transport_layer_initialization( - struct scic_sds_phy *sci_phy, - struct scu_transport_layer_registers __iomem *transport_layer_registers) -{ - u32 tl_control; - - sci_phy->transport_layer_registers = transport_layer_registers; - - writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX, - &sci_phy->transport_layer_registers->stp_rni); - - /* - * Hardware team recommends that we enable the STP prefetch for all - * transports - */ - tl_control = readl(&sci_phy->transport_layer_registers->control); - tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); - writel(tl_control, &sci_phy->transport_layer_registers->control); - - return SCI_SUCCESS; -} - -/** - * This method will initialize the phy link layer registers - * @sci_phy: - * @link_layer_registers: - * - * enum sci_status - */ -static enum sci_status -scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, - struct scu_link_layer_registers __iomem *link_layer_registers) -{ - struct scic_sds_controller *scic = - sci_phy->owning_port->owning_controller; - int phy_idx = sci_phy->phy_index; - struct sci_phy_user_params *phy_user = - &scic->user_parameters.sds1.phys[phy_idx]; - struct sci_phy_oem_params *phy_oem = - &scic->oem_parameters.sds1.phys[phy_idx]; - u32 phy_configuration; - struct scic_phy_cap phy_cap; - u32 parity_check = 0; - u32 parity_count = 0; - u32 llctl, link_rate; - u32 clksm_value = 0; - - sci_phy->link_layer_registers = link_layer_registers; - - /* Set our IDENTIFY frame data */ - #define SCI_END_DEVICE 0x01 - - writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | - SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | - SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | - SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | - SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), - &sci_phy->link_layer_registers->transmit_identification); - - /* Write the device SAS Address */ - writel(0xFEDCBA98, - &sci_phy->link_layer_registers->sas_device_name_high); - writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low); - - /* Write the source SAS Address */ - writel(phy_oem->sas_address.high, - &sci_phy->link_layer_registers->source_sas_address_high); - writel(phy_oem->sas_address.low, - &sci_phy->link_layer_registers->source_sas_address_low); - - /* Clear and Set the PHY Identifier */ - writel(0, &sci_phy->link_layer_registers->identify_frame_phy_id); - writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), - &sci_phy->link_layer_registers->identify_frame_phy_id); - - /* Change the initial state of the phy configuration register */ - phy_configuration = - readl(&sci_phy->link_layer_registers->phy_configuration); - - /* Hold OOB state machine in reset */ - phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - writel(phy_configuration, - &sci_phy->link_layer_registers->phy_configuration); - - /* Configure the SNW capabilities */ - phy_cap.all = 0; - phy_cap.start = 1; - phy_cap.gen3_no_ssc = 1; - phy_cap.gen2_no_ssc = 1; - phy_cap.gen1_no_ssc = 1; - if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) { - phy_cap.gen3_ssc = 1; - phy_cap.gen2_ssc = 1; - phy_cap.gen1_ssc = 1; - } - - /* - * The SAS specification indicates that the phy_capabilities that - * are transmitted shall have an even parity. Calculate the parity. */ - parity_check = phy_cap.all; - while (parity_check != 0) { - if (parity_check & 0x1) - parity_count++; - parity_check >>= 1; - } - - /* - * If parity indicates there are an odd number of bits set, then - * set the parity bit to 1 in the phy capabilities. */ - if ((parity_count % 2) != 0) - phy_cap.parity = 1; - - writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities); - - /* Set the enable spinup period but disable the ability to send - * notify enable spinup - */ - writel(SCU_ENSPINUP_GEN_VAL(COUNT, - phy_user->notify_enable_spin_up_insertion_frequency), - &sci_phy->link_layer_registers->notify_enable_spinup_control); - - /* Write the ALIGN Insertion Ferequency for connected phy and - * inpendent of connected state - */ - clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED, - phy_user->in_connection_align_insertion_frequency); - - clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, - phy_user->align_insertion_frequency); - - writel(clksm_value, &sci_phy->link_layer_registers->clock_skew_management); - - /* @todo Provide a way to write this register correctly */ - writel(0x02108421, - &sci_phy->link_layer_registers->afe_lookup_table_control); - - llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, - (u8)scic->user_parameters.sds1.no_outbound_task_timeout); - - switch(phy_user->max_speed_generation) { - case SCIC_SDS_PARM_GEN3_SPEED: - link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3; - break; - case SCIC_SDS_PARM_GEN2_SPEED: - link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2; - break; - default: - link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1; - break; - } - llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); - writel(llctl, &sci_phy->link_layer_registers->link_layer_control); - - if (is_a0() || is_a2()) { - /* Program the max ARB time for the PHY to 700us so we inter-operate with - * the PMC expander which shuts down PHYs if the expander PHY generates too - * many breaks. This time value will guarantee that the initiator PHY will - * generate the break. - */ - writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, - &sci_phy->link_layer_registers->maximum_arbitration_wait_timer_timeout); - } - - /* - * Set the link layer hang detection to 500ms (0x1F4) from its default - * value of 128ms. Max value is 511 ms. - */ - writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout); - - /* We can exit the initial state to the stopped state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); - - return SCI_SUCCESS; -} - -/** - * This function will handle the sata SIGNATURE FIS timeout condition. It will - * restart the starting substate machine since we dont know what has actually - * happening. - */ -static void scic_sds_phy_sata_timeout(void *phy) -{ - struct scic_sds_phy *sci_phy = phy; - - dev_dbg(sciphy_to_dev(sci_phy), - "%s: SCIC SDS Phy 0x%p did not receive signature fis before " - "timeout.\n", - __func__, - sci_phy); - - sci_base_state_machine_stop(&sci_phy->starting_substate_machine); - - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); -} - -/** - * This method returns the port currently containing this phy. If the phy is - * currently contained by the dummy port, then the phy is considered to not - * be part of a port. - * @sci_phy: This parameter specifies the phy for which to retrieve the - * containing port. - * - * This method returns a handle to a port that contains the supplied phy. - * NULL This value is returned if the phy is not part of a real - * port (i.e. it's contained in the dummy port). !NULL All other - * values indicate a handle/pointer to the port containing the phy. - */ -struct scic_sds_port *scic_sds_phy_get_port( - struct scic_sds_phy *sci_phy) -{ - if (scic_sds_port_get_index(sci_phy->owning_port) == SCIC_SDS_DUMMY_PORT) - return NULL; - - return sci_phy->owning_port; -} - -/** - * This method will assign a port to the phy object. - * @out]: sci_phy This parameter specifies the phy for which to assign a port - * object. - * - * - */ -void scic_sds_phy_set_port( - struct scic_sds_phy *sci_phy, - struct scic_sds_port *sci_port) -{ - sci_phy->owning_port = sci_port; - - if (sci_phy->bcn_received_while_port_unassigned) { - sci_phy->bcn_received_while_port_unassigned = false; - scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); - } -} - -/** - * This method will initialize the constructed phy - * @sci_phy: - * @link_layer_registers: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_initialize( - struct scic_sds_phy *sci_phy, - struct scu_transport_layer_registers __iomem *transport_layer_registers, - struct scu_link_layer_registers __iomem *link_layer_registers) -{ - struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - struct isci_host *ihost = scic_to_ihost(scic); - - /* Create the SIGNATURE FIS Timeout timer for this phy */ - sci_phy->sata_timeout_timer = - isci_timer_create( - ihost, - sci_phy, - scic_sds_phy_sata_timeout); - - /* Perfrom the initialization of the TL hardware */ - scic_sds_phy_transport_layer_initialization( - sci_phy, - transport_layer_registers); - - /* Perofrm the initialization of the PE hardware */ - scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers); - - /* - * There is nothing that needs to be done in this state just - * transition to the stopped state. */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); - - return SCI_SUCCESS; -} - -/** - * This method assigns the direct attached device ID for this phy. - * - * @sci_phy The phy for which the direct attached device id is to - * be assigned. - * @device_id The direct attached device ID to assign to the phy. - * This will either be the RNi for the device or an invalid RNi if there - * is no current device assigned to the phy. - */ -void scic_sds_phy_setup_transport( - struct scic_sds_phy *sci_phy, - u32 device_id) -{ - u32 tl_control; - - writel(device_id, &sci_phy->transport_layer_registers->stp_rni); - - /* - * The read should guarantee that the first write gets posted - * before the next write - */ - tl_control = readl(&sci_phy->transport_layer_registers->control); - tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); - writel(tl_control, &sci_phy->transport_layer_registers->control); -} - -/** - * - * @sci_phy: The phy object to be suspended. - * - * This function will perform the register reads/writes to suspend the SCU - * hardware protocol engine. none - */ -static void scic_sds_phy_suspend( - struct scic_sds_phy *sci_phy) -{ - u32 scu_sas_pcfg_value; - - scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); - - scic_sds_phy_setup_transport( - sci_phy, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); -} - -void scic_sds_phy_resume(struct scic_sds_phy *sci_phy) -{ - u32 scu_sas_pcfg_value; - - scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); -} - -void scic_sds_phy_get_sas_address(struct scic_sds_phy *sci_phy, - struct sci_sas_address *sas_address) -{ - sas_address->high = readl(&sci_phy->link_layer_registers->source_sas_address_high); - sas_address->low = readl(&sci_phy->link_layer_registers->source_sas_address_low); -} - -void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy, - struct sci_sas_address *sas_address) -{ - struct sas_identify_frame *iaf; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - iaf = &iphy->frame_rcvd.iaf; - memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE); -} - -void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy, - struct scic_phy_proto *protocols) -{ - protocols->all = - (u16)(readl(&sci_phy-> - link_layer_registers->transmit_identification) & - 0x0000FFFF); -} - -/** - * This method will attempt to start the phy object. This request is only valid - * when the phy is in the stopped state - * @sci_phy: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) -{ - return sci_phy->state_handlers->start_handler(sci_phy); -} - -/** - * This method will attempt to stop the phy object. - * @sci_phy: - * - * enum sci_status SCI_SUCCESS if the phy is going to stop SCI_INVALID_STATE - * if the phy is not in a valid state to stop - */ -enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) -{ - return sci_phy->state_handlers->stop_handler(sci_phy); -} - -/** - * This method will attempt to reset the phy. This request is only valid when - * the phy is in an ready state - * @sci_phy: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_reset( - struct scic_sds_phy *sci_phy) -{ - return sci_phy->state_handlers->reset_handler(sci_phy); -} - -/** - * This method will process the event code received. - * @sci_phy: - * @event_code: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - return sci_phy->state_handlers->event_handler(sci_phy, event_code); -} - -/** - * This method will process the frame index received. - * @sci_phy: - * @frame_index: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_frame_handler( - struct scic_sds_phy *sci_phy, - u32 frame_index) -{ - return sci_phy->state_handlers->frame_handler(sci_phy, frame_index); -} - -/** - * This method will give the phy permission to consume power - * @sci_phy: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_consume_power_handler( - struct scic_sds_phy *sci_phy) -{ - return sci_phy->state_handlers->consume_power_handler(sci_phy); -} - -/* - * ***************************************************************************** - * * SCIC SDS PHY HELPER FUNCTIONS - * ***************************************************************************** */ - - -/** - * - * @sci_phy: The phy object that received SAS PHY DETECTED. - * - * This method continues the link training for the phy as if it were a SAS PHY - * instead of a SATA PHY. This is done because the completion queue had a SAS - * PHY DETECTED event when the state machine was expecting a SATA PHY event. - * none - */ -static void scic_sds_phy_start_sas_link_training( - struct scic_sds_phy *sci_phy) -{ - u32 phy_control; - - phy_control = - readl(&sci_phy->link_layer_registers->phy_configuration); - phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); - writel(phy_control, - &sci_phy->link_layer_registers->phy_configuration); - - sci_base_state_machine_change_state( - &sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN - ); - - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; -} - -/** - * - * @sci_phy: The phy object that received a SATA SPINUP HOLD event - * - * This method continues the link training for the phy as if it were a SATA PHY - * instead of a SAS PHY. This is done because the completion queue had a SATA - * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none - */ -static void scic_sds_phy_start_sata_link_training( - struct scic_sds_phy *sci_phy) -{ - sci_base_state_machine_change_state( - &sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER - ); - - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; -} - -/** - * scic_sds_phy_complete_link_training - perform processing common to - * all protocols upon completion of link training. - * @sci_phy: This parameter specifies the phy object for which link training - * has completed. - * @max_link_rate: This parameter specifies the maximum link rate to be - * associated with this phy. - * @next_state: This parameter specifies the next state for the phy's starting - * sub-state machine. - * - */ -static void scic_sds_phy_complete_link_training( - struct scic_sds_phy *sci_phy, - enum sas_linkrate max_link_rate, - u32 next_state) -{ - sci_phy->max_negotiated_speed = max_link_rate; - - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - next_state); -} - -static void scic_sds_phy_restart_starting_state( - struct scic_sds_phy *sci_phy) -{ - /* Stop the current substate machine */ - sci_base_state_machine_stop(&sci_phy->starting_substate_machine); - - /* Re-enter the base state machine starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); -} - -/* **************************************************************************** - * SCIC SDS PHY general handlers - ************************************************************************** */ -static enum sci_status scic_sds_phy_starting_substate_general_stop_handler( - struct scic_sds_phy *phy) -{ - sci_base_state_machine_stop(&phy->starting_substate_machine); - - sci_base_state_machine_change_state(&phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); - - return SCI_SUCCESS; -} - -/* - * ***************************************************************************** - * * SCIC SDS PHY EVENT_HANDLERS - * ***************************************************************************** */ - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - - * decode the event - sas phy detected causes a state transition to the wait - * for speed event notification. - any other events log a warning message and - * set a failure status enum sci_status SCI_SUCCESS on any valid event notification - * SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SAS_PHY_DETECTED: - scic_sds_phy_start_sas_link_training(sci_phy); - sci_phy->is_in_link_training = true; - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - scic_sds_phy_start_sata_link_training(sci_phy); - sci_phy->is_in_link_training = true; - break; - - default: - dev_dbg(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - - * decode the event - sas phy detected returns us back to this state. - speed - * event detected causes a state transition to the wait for iaf. - identify - * timeout is an un-expected event and the state machine is restarted. - link - * failure events restart the starting state machine - any other events log a - * warning message and set a failure status enum sci_status SCI_SUCCESS on any valid - * event notification SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SAS_PHY_DETECTED: - /* - * Why is this being reported again by the controller? - * We would re-enter this state so just stay here */ - break; - - case SCU_EVENT_SAS_15: - case SCU_EVENT_SAS_15_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_1_5_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); - break; - - case SCU_EVENT_SAS_30: - case SCU_EVENT_SAS_30_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_3_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); - break; - - case SCU_EVENT_SAS_60: - case SCU_EVENT_SAS_60_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_6_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - /* - * We were doing SAS PHY link training and received a SATA PHY event - * continue OOB/SN as if this were a SATA PHY */ - scic_sds_phy_start_sata_link_training(sci_phy); - break; - - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - - * decode the event - sas phy detected event backs up the state machine to the - * await speed notification. - identify timeout is an un-expected event and the - * state machine is restarted. - link failure events restart the starting state - * machine - any other events log a warning message and set a failure status - * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any - * unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SAS_PHY_DETECTED: - /* Backup the state machine */ - scic_sds_phy_start_sas_link_training(sci_phy); - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - /* - * We were doing SAS PHY link training and received a SATA PHY event - * continue OOB/SN as if this were a SATA PHY */ - scic_sds_phy_start_sata_link_training(sci_phy); - break; - - case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: - case SCU_EVENT_LINK_FAILURE: - case SCU_EVENT_HARD_RESET_RECEIVED: - /* Start the oob/sn state machine over again */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_POWER. - - * decode the event - link failure events restart the starting state machine - - * any other events log a warning message and set a failure status enum sci_status - * SCI_SUCCESS on a link failure event SCI_FAILURE on any unexpected event - * notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received unexpected " - "event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - - * decode the event - link failure events restart the starting state machine - - * sata spinup hold events are ignored since they are expected - any other - * events log a warning message and set a failure status enum sci_status SCI_SUCCESS - * on a link failure event SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - /* These events are received every 10ms and are expected while in this state */ - break; - - case SCU_EVENT_SAS_PHY_DETECTED: - /* - * There has been a change in the phy type before OOB/SN for the - * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * scic_sds_phy_starting_substate_await_sata_phy_event_handler - - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - - * decode the event - link failure events restart the starting state machine - - * sata spinup hold events are ignored since they are expected - sata phy - * detected event change to the wait speed event - any other events log a - * warning message and set a failure status enum sci_status SCI_SUCCESS on a link - * failure event SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handler( - struct scic_sds_phy *sci_phy, u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - /* These events might be received since we dont know how many may be in - * the completion queue while waiting for power - */ - break; - - case SCU_EVENT_SATA_PHY_DETECTED: - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; - - /* We have received the SATA PHY notification change state */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); - break; - - case SCU_EVENT_SAS_PHY_DETECTED: - /* There has been a change in the phy type before OOB/SN for the - * SATA finished start down the SAS link traning path. - */ - scic_sds_phy_start_sas_link_training(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - * - decode the event - sata phy detected returns us back to this state. - - * speed event detected causes a state transition to the wait for signature. - - * link failure events restart the starting state machine - any other events - * log a warning message and set a failure status enum sci_status SCI_SUCCESS on any - * valid event notification SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SATA_PHY_DETECTED: - /* - * The hardware reports multiple SATA PHY detected events - * ignore the extras */ - break; - - case SCU_EVENT_SATA_15: - case SCU_EVENT_SATA_15_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_1_5_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); - break; - - case SCU_EVENT_SATA_30: - case SCU_EVENT_SATA_30_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_3_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); - break; - - case SCU_EVENT_SATA_60: - case SCU_EVENT_SATA_60_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_6_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); - break; - - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - case SCU_EVENT_SAS_PHY_DETECTED: - /* - * There has been a change in the phy type before OOB/SN for the - * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * scic_sds_phy_starting_substate_await_sig_fis_event_handler - - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - - * decode the event - sas phy detected event backs up the state machine to the - * await speed notification. - identify timeout is an un-expected event and the - * state machine is restarted. - link failure events restart the starting state - * machine - any other events log a warning message and set a failure status - * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any - * unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handler( - struct scic_sds_phy *sci_phy, u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SATA_PHY_DETECTED: - /* Backup the state machine */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); - break; - - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - - -/* - * ***************************************************************************** - * * SCIC SDS PHY FRAME_HANDLERS - * ***************************************************************************** */ - -/** - * - * @phy: This is struct scic_sds_phy object which is being requested to decode the - * frame data. - * @frame_index: This is the index of the unsolicited frame which was received - * for this phy. - * - * This method decodes the unsolicited frame when the struct scic_sds_phy is in the - * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Get the UF Header - If the UF - * is an IAF - Copy IAF data to local phy object IAF data buffer. - Change - * starting substate to wait power. - else - log warning message of unexpected - * unsolicted frame - release frame buffer enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler( - struct scic_sds_phy *sci_phy, u32 frame_index) -{ - enum sci_status result; - u32 *frame_words; - struct sas_identify_frame iaf; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_phy_get_controller(sci_phy)->uf_control), - frame_index, - (void **)&frame_words); - - if (result != SCI_SUCCESS) - return result; - - sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32)); - if (iaf.frame_type == 0) { - u32 state; - - memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); - if (iaf.smp_tport) { - /* We got the IAF for an expander PHY go to the final - * state since there are no power requirements for - * expander phys. - */ - state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL; - } else { - /* We got the IAF we can now go to the await spinup - * semaphore state - */ - state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; - } - sci_base_state_machine_change_state( - &sci_phy->starting_substate_machine, - state); - result = SCI_SUCCESS; - } else - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected frame id %x\n", - __func__, - frame_index); - - scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), - frame_index); - - return result; -} - -/** - * - * @phy: This is struct scic_sds_phy object which is being requested to decode the - * frame data. - * @frame_index: This is the index of the unsolicited frame which was received - * for this phy. - * - * This method decodes the unsolicited frame when the struct scic_sds_phy is in the - * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Get the UF Header - If - * the UF is an SIGNATURE FIS - Copy IAF data to local phy object SIGNATURE FIS - * data buffer. - else - log warning message of unexpected unsolicted frame - - * release frame buffer enum sci_status SCI_SUCCESS Must decode the SIGNATURE FIS - * data - */ -static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handler( - struct scic_sds_phy *sci_phy, - u32 frame_index) -{ - enum sci_status result; - struct dev_to_host_fis *frame_header; - u32 *fis_frame_data; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_phy_get_controller(sci_phy)->uf_control), - frame_index, - (void **)&frame_header); - - if (result != SCI_SUCCESS) - return result; - - if ((frame_header->fis_type == FIS_REGD2H) && - !(frame_header->status & ATA_BUSY)) { - scic_sds_unsolicited_frame_control_get_buffer( - &(scic_sds_phy_get_controller(sci_phy)->uf_control), - frame_index, - (void **)&fis_frame_data); - - scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis, - frame_header, - fis_frame_data); - - /* got IAF we can now go to the await spinup semaphore state */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); - - result = SCI_SUCCESS; - } else - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected frame id %x\n", - __func__, - frame_index); - - /* Regardless of the result we are done with this frame with it */ - scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), - frame_index); - - return result; -} - -/* - * ***************************************************************************** - * * SCIC SDS PHY POWER_HANDLERS - * ***************************************************************************** */ - -/* - * This method is called by the struct scic_sds_controller when the phy object is - * granted power. - The notify enable spinups are turned on for this phy object - * - The phy state machine is transitioned to the - * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler( - struct scic_sds_phy *sci_phy) -{ - u32 enable_spinup; - - enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); - enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); - writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control); - - /* Change state to the final state this substate machine has run to completion */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); - - return SCI_SUCCESS; -} - -/* - * This method is called by the struct scic_sds_controller when the phy object is - * granted power. - The phy state machine is transitioned to the - * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler( - struct scic_sds_phy *sci_phy) -{ - u32 scu_sas_pcfg_value; - - /* Release the spinup hold state and reset the OOB state machine */ - scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value &= - ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); - - /* Now restart the OOB operation */ - scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); - - /* Change state to the final state this substate machine has run to completion */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); - - return SCI_SUCCESS; -} - -static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, - const char *func) -{ - dev_dbg(sciphy_to_dev(sci_phy), - "%s: in wrong state: %d\n", func, - sci_base_state_machine_get_state(&sci_phy->state_machine)); - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status -scic_sds_phy_default_start_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status -scic_sds_phy_default_stop_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status -scic_sds_phy_default_reset_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status -scic_sds_phy_default_destroy_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status -scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy, - u32 frame_index) -{ - struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - - default_phy_handler(sci_phy, __func__); - scic_sds_controller_release_frame(scic, frame_index); - - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status -scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy, - u32 event_code) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status -scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - - - -static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = { - [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_ossp_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_iaf_uf_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sas_power_event_handler, - .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sata_power_event_handler, - .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sata_phy_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sata_speed_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sig_fis_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - } -}; - -/** - * scic_sds_phy_set_starting_substate_handlers() - - * - * This macro sets the starting substate handlers by state_id - */ -#define scic_sds_phy_set_starting_substate_handlers(phy, state_id) \ - scic_sds_phy_set_state_handlers(\ - (phy), \ - &scic_sds_phy_starting_substate_handler_table[(state_id)] \ - ) - -/* - * **************************************************************************** - * * PHY STARTING SUBSTATE METHODS - * **************************************************************************** */ - -/** - * scic_sds_phy_starting_initial_substate_enter - - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state - * handlers are put in place for the struct scic_sds_phy object. - The state is - * changed to the wait phy type event notification. none - */ -static void scic_sds_phy_starting_initial_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); - - /* This is just an temporary state go off to the starting state */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( - void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the - * struct scic_sds_phy object state handlers for this state. - Add this phy object to - * the power control queue none - */ -static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER - ); - - scic_sds_controller_power_control_queue_insert( - scic_sds_phy_get_controller(sci_phy), - sci_phy - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the - * struct scic_sds_phy object from the power control queue. none - */ -static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_controller_power_control_queue_remove( - scic_sds_phy_get_controller(sci_phy), sci_phy - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the - * struct scic_sds_phy object state handlers for this state. - Add this phy object to - * the power control queue none - */ -static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER - ); - - scic_sds_controller_power_control_queue_insert( - scic_sds_phy_get_controller(sci_phy), - sci_phy - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the - * struct scic_sds_phy object from the power control queue. none - */ -static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_controller_power_control_queue_remove( - scic_sds_phy_get_controller(sci_phy), - sci_phy - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); - - isci_timer_start(sci_phy->sata_timeout_timer, - SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy - * on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer - * that was started on entry to await sata phy event notification none - */ -static inline void scic_sds_phy_starting_await_sata_phy_substate_exit( - void *object) -{ - struct scic_sds_phy *sci_phy = object; - - isci_timer_stop(sci_phy->sata_timeout_timer); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); - - isci_timer_start(sci_phy->sata_timeout_timer, - SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the - * struct scic_sds_phy on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer - * that was started on entry to await sata phy event notification none - */ -static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( - void *object) -{ - struct scic_sds_phy *sci_phy = object; - - isci_timer_stop(sci_phy->sata_timeout_timer); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the - * struct scic_sds_phy object state handlers for this state. - * - Start the SIGNATURE FIS - * timeout timer none - */ -static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) -{ - bool continue_to_ready_state; - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); - - continue_to_ready_state = scic_sds_port_link_detected( - sci_phy->owning_port, - sci_phy); - - if (continue_to_ready_state) { - /* - * Clear the PE suspend condition so we can actually - * receive SIG FIS - * The hardware will not respond to the XRDY until the PE - * suspend condition is cleared. - */ - scic_sds_phy_resume(sci_phy); - - isci_timer_start(sci_phy->sata_timeout_timer, - SCIC_SDS_SIGNATURE_FIS_TIMEOUT); - } else - sci_phy->is_in_link_training = false; -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the - * struct scic_sds_phy on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE - * FIS timeout timer. none - */ -static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( - void *object) -{ - struct scic_sds_phy *sci_phy = object; - - isci_timer_stop(sci_phy->sata_timeout_timer); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy - * object state handlers for this state. - Change base state machine to the - * ready state. none - */ -static void scic_sds_phy_starting_final_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers(sci_phy, - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); - - /* State machine has run to completion so exit out and change - * the base state machine to the ready state - */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_READY); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_phy_starting_substates[] = { - [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .enter_state = scic_sds_phy_starting_initial_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter, - .exit_state = scic_sds_phy_starting_await_sas_power_substate_exit, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .enter_state = scic_sds_phy_starting_await_sata_power_substate_enter, - .exit_state = scic_sds_phy_starting_await_sata_power_substate_exit - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter, - .exit_state = scic_sds_phy_starting_await_sata_phy_substate_exit - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter, - .exit_state = scic_sds_phy_starting_await_sata_speed_substate_exit - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter, - .exit_state = scic_sds_phy_starting_await_sig_fis_uf_substate_exit - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .enter_state = scic_sds_phy_starting_final_substate_enter, - } -}; - -/* - * This method takes the struct scic_sds_phy from a stopped state and - * attempts to start it. - The phy state machine is transitioned to the - * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS - */ -static enum sci_status -scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy) -{ - struct isci_host *ihost; - struct scic_sds_controller *scic; - - scic = scic_sds_phy_get_controller(sci_phy), - ihost = scic_to_ihost(scic); - - /* Create the SIGNATURE FIS Timeout timer for this phy */ - sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, - scic_sds_phy_sata_timeout); - - if (sci_phy->sata_timeout_timer) - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - - return SCI_SUCCESS; -} - -static enum sci_status -scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy) -{ - return SCI_SUCCESS; -} - -static enum sci_status -scic_sds_phy_ready_state_stop_handler(struct scic_sds_phy *sci_phy) -{ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); - - return SCI_SUCCESS; -} - -static enum sci_status -scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy) -{ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_RESETTING); - - return SCI_SUCCESS; -} - -/** - * scic_sds_phy_ready_state_event_handler - - * @phy: This is the struct scic_sds_phy object which has received the event. - * - * This method request the struct scic_sds_phy handle the received event. The only - * event that we are interested in while in the ready state is the link failure - * event. - decoded event is a link failure - transition the struct scic_sds_phy back - * to the SCI_BASE_PHY_STATE_STARTING state. - any other event received will - * report a warning message enum sci_status SCI_SUCCESS if the event received is a - * link failure SCI_FAILURE_INVALID_STATE for any other event received. - */ -static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_phy *sci_phy, - u32 event_code) -{ - enum sci_status result = SCI_FAILURE; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - result = SCI_SUCCESS; - break; - - case SCU_EVENT_BROADCAST_CHANGE: - /* Broadcast change received. Notify the port. */ - if (scic_sds_phy_get_port(sci_phy) != NULL) - scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); - else - sci_phy->bcn_received_while_port_unassigned = true; - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%sP SCIC PHY 0x%p ready state machine received " - "unexpected event_code %x\n", - __func__, sci_phy, event_code); - - result = SCI_FAILURE_INVALID_STATE; - break; - } - - return result; -} - -static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sds_phy *sci_phy, - u32 event_code) -{ - enum sci_status result = SCI_FAILURE; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_HARD_RESET_TRANSMITTED: - /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - result = SCI_SUCCESS; - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: SCIC PHY 0x%p resetting state machine received " - "unexpected event_code %x\n", - __func__, sci_phy, event_code); - - result = SCI_FAILURE_INVALID_STATE; - break; - } - - return result; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { - [SCI_BASE_PHY_STATE_INITIAL] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_STOPPED] = { - .start_handler = scic_sds_phy_stopped_state_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_stopped_state_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_STARTING] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_READY] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_ready_state_stop_handler, - .reset_handler = scic_sds_phy_ready_state_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_ready_state_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_RESETTING] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_resetting_state_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_FINAL] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - } -}; - -/* - * **************************************************************************** - * * PHY STATE PRIVATE METHODS - * **************************************************************************** */ - -/** - * - * @sci_phy: This is the struct scic_sds_phy object to stop. - * - * This method will stop the struct scic_sds_phy object. This does not reset the - * protocol engine it just suspends it and places it in a state where it will - * not cause the end device to power up. none - */ -static void scu_link_layer_stop_protocol_engine( - struct scic_sds_phy *sci_phy) -{ - u32 scu_sas_pcfg_value; - u32 enable_spinup_value; - - /* Suspend the protocol engine and place it in a sata spinup hold state */ - scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value |= - (SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | - SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) | - SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD)); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); - - /* Disable the notify enable spinup primitives */ - enable_spinup_value = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); - enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE); - writel(enable_spinup_value, &sci_phy->link_layer_registers->notify_enable_spinup_control); -} - -/** - * - * - * This method will start the OOB/SN state machine for this struct scic_sds_phy object. - */ -static void scu_link_layer_start_oob( - struct scic_sds_phy *sci_phy) -{ - u32 scu_sas_pcfg_value; - - scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); - scu_sas_pcfg_value &= - ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | - SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); -} - -/** - * - * - * This method will transmit a hard reset request on the specified phy. The SCU - * hardware requires that we reset the OOB state machine and set the hard reset - * bit in the phy configuration register. We then must start OOB over with the - * hard reset bit set. - */ -static void scu_link_layer_tx_hard_reset( - struct scic_sds_phy *sci_phy) -{ - u32 phy_configuration_value; - - /* - * SAS Phys must wait for the HARD_RESET_TX event notification to transition - * to the starting state. */ - phy_configuration_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - phy_configuration_value |= - (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | - SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); - writel(phy_configuration_value, - &sci_phy->link_layer_registers->phy_configuration); - - /* Now take the OOB state machine out of reset */ - phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); - phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - writel(phy_configuration_value, - &sci_phy->link_layer_registers->phy_configuration); -} - -/* - * **************************************************************************** - * * PHY BASE STATE METHODS - * **************************************************************************** */ - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state - * handlers for the phy object base state machine initial state. none - */ -static void scic_sds_phy_initial_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state - * handlers for the phy object base state machine initial state. - The SCU - * hardware is requested to stop the protocol engine. none - */ -static void scic_sds_phy_stopped_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - struct isci_host *ihost = scic_to_ihost(scic); - - /* - * @todo We need to get to the controller to place this PE in a - * reset state - */ - - scic_sds_phy_set_base_state_handlers(sci_phy, - SCI_BASE_PHY_STATE_STOPPED); - - if (sci_phy->sata_timeout_timer != NULL) { - isci_del_timer(ihost, sci_phy->sata_timeout_timer); - - sci_phy->sata_timeout_timer = NULL; - } - - scu_link_layer_stop_protocol_engine(sci_phy); - - if (sci_phy->state_machine.previous_state_id != - SCI_BASE_PHY_STATE_INITIAL) - scic_sds_controller_link_down( - scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), - sci_phy); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state - * handlers for the phy object base state machine starting state. - The SCU - * hardware is requested to start OOB/SN on this protocl engine. - The phy - * starting substate machine is started. - If the previous state was the ready - * state then the struct scic_sds_controller is informed that the phy has gone link - * down. none - */ -static void scic_sds_phy_starting_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING); - - scu_link_layer_stop_protocol_engine(sci_phy); - scu_link_layer_start_oob(sci_phy); - - /* We don't know what kind of phy we are going to be just yet */ - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; - sci_phy->bcn_received_while_port_unassigned = false; - - /* Change over to the starting substate machine to continue */ - sci_base_state_machine_start(&sci_phy->starting_substate_machine); - - if (sci_phy->state_machine.previous_state_id - == SCI_BASE_PHY_STATE_READY) { - scic_sds_controller_link_down( - scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), - sci_phy - ); - } -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state - * handlers for the phy object base state machine ready state. - The SCU - * hardware protocol engine is resumed. - The struct scic_sds_controller is informed - * that the phy object has gone link up. none - */ -static void scic_sds_phy_ready_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY); - - scic_sds_controller_link_up( - scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), - sci_phy - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on exiting - * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware - * protocol engine represented by this struct scic_sds_phy object. none - */ -static void scic_sds_phy_ready_state_exit(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_suspend(sci_phy); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state - * handlers for the phy object base state machine resetting state. none - */ -static void scic_sds_phy_resetting_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING); - - /* - * The phy is being reset, therefore deactivate it from the port. - * In the resetting state we don't notify the user regarding - * link up and link down notifications. */ - scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false); - - if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { - scu_link_layer_tx_hard_reset(sci_phy); - } else { - /* - * The SCU does not need to have a discrete reset state so - * just go back to the starting state. - */ - sci_base_state_machine_change_state( - &sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - } -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state - * handlers for the phy object base state machine final state. none - */ -static void scic_sds_phy_final_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL); - - /* Nothing to do here */ -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_phy_state_table[] = { - [SCI_BASE_PHY_STATE_INITIAL] = { - .enter_state = scic_sds_phy_initial_state_enter, - }, - [SCI_BASE_PHY_STATE_STOPPED] = { - .enter_state = scic_sds_phy_stopped_state_enter, - }, - [SCI_BASE_PHY_STATE_STARTING] = { - .enter_state = scic_sds_phy_starting_state_enter, - }, - [SCI_BASE_PHY_STATE_READY] = { - .enter_state = scic_sds_phy_ready_state_enter, - .exit_state = scic_sds_phy_ready_state_exit, - }, - [SCI_BASE_PHY_STATE_RESETTING] = { - .enter_state = scic_sds_phy_resetting_state_enter, - }, - [SCI_BASE_PHY_STATE_FINAL] = { - .enter_state = scic_sds_phy_final_state_enter, - }, -}; - -void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, - struct scic_sds_port *owning_port, u8 phy_index) -{ - sci_base_state_machine_construct(&sci_phy->state_machine, - sci_phy, - scic_sds_phy_state_table, - SCI_BASE_PHY_STATE_INITIAL); - - sci_base_state_machine_start(&sci_phy->state_machine); - - /* Copy the rest of the input data to our locals */ - sci_phy->owning_port = owning_port; - sci_phy->phy_index = phy_index; - sci_phy->bcn_received_while_port_unassigned = false; - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; - sci_phy->link_layer_registers = NULL; - sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; - sci_phy->sata_timeout_timer = NULL; - - /* Initialize the the substate machines */ - sci_base_state_machine_construct(&sci_phy->starting_substate_machine, - sci_phy, - scic_sds_phy_starting_substates, - SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); -} diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h deleted file mode 100644 index 0d7bab3fc93b..000000000000 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ /dev/null @@ -1,439 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_PHY_H_ -#define _SCIC_SDS_PHY_H_ - -#include "sas.h" -#include "scic_phy.h" -#include "registers.h" -#include "state_machine.h" -#include - -struct scic_sds_port; -/** - * - * - * This is the timeout value for the SATA phy to wait for a SIGNATURE FIS - * before restarting the starting state machine. Technically, the old parallel - * ATA specification required up to 30 seconds for a device to issue its - * signature FIS as a result of a soft reset. Now we see that devices respond - * generally within 15 seconds, but we'll use 25 for now. - */ -#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT 25000 - -/** - * - * - * This is the timeout for the SATA OOB/SN because the hardware does not - * recognize a hot plug after OOB signal but before the SN signals. We need to - * make sure after a hotplug timeout if we have not received the speed event - * notification from the hardware that we restart the hardware OOB state - * machine. - */ -#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250 - -enum scic_sds_phy_states { - /** - * Simply the initial state for the base domain state machine. - */ - SCI_BASE_PHY_STATE_INITIAL, - - /** - * This state indicates that the phy has successfully been stopped. - * In this state no new IO operations are permitted on this phy. - * This state is entered from the INITIAL state. - * This state is entered from the STARTING state. - * This state is entered from the READY state. - * This state is entered from the RESETTING state. - */ - SCI_BASE_PHY_STATE_STOPPED, - - /** - * This state indicates that the phy is in the process of becomming - * ready. In this state no new IO operations are permitted on this phy. - * This state is entered from the STOPPED state. - * This state is entered from the READY state. - * This state is entered from the RESETTING state. - */ - SCI_BASE_PHY_STATE_STARTING, - - /** - * This state indicates the the phy is now ready. Thus, the user - * is able to perform IO operations utilizing this phy as long as it - * is currently part of a valid port. - * This state is entered from the STARTING state. - */ - SCI_BASE_PHY_STATE_READY, - - /** - * This state indicates that the phy is in the process of being reset. - * In this state no new IO operations are permitted on this phy. - * This state is entered from the READY state. - */ - SCI_BASE_PHY_STATE_RESETTING, - - /** - * Simply the final state for the base phy state machine. - */ - SCI_BASE_PHY_STATE_FINAL, -}; - - -/** - * enum scic_sds_phy_starting_substates - - * - * - */ -enum scic_sds_phy_starting_substates { - /** - * Initial state - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL, - - /** - * Wait state for the hardware OSSP event type notification - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN, - - /** - * Wait state for the PHY speed notification - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN, - - /** - * Wait state for the IAF Unsolicited frame notification - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF, - - /** - * Wait state for the request to consume power - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER, - - /** - * Wait state for request to consume power - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER, - - /** - * Wait state for the SATA PHY notification - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN, - - /** - * Wait for the SATA PHY speed notification - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN, - - /** - * Wait state for the SIGNATURE FIS unsolicited frame notification - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF, - - /** - * Exit state for this state machine - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL, -}; - -struct scic_sds_port; -struct scic_sds_controller; - -/** - * This enumeration provides a named phy type for the state machine - * - * - */ -enum scic_sds_phy_protocol { - /** - * This is an unknown phy type since there is either nothing on the other - * end or we have not detected the phy type as yet. - */ - SCIC_SDS_PHY_PROTOCOL_UNKNOWN, - - /** - * This is a SAS PHY - */ - SCIC_SDS_PHY_PROTOCOL_SAS, - - /** - * This is a SATA PHY - */ - SCIC_SDS_PHY_PROTOCOL_SATA, - - SCIC_SDS_MAX_PHY_PROTOCOLS -}; - -/** - * struct scic_sds_phy - This structure contains or references all of the data - * necessary to represent the core phy object and SCU harware protocol - * engine. - * - * - */ -struct scic_sds_phy { - /** - * This field contains the information for the base phy state machine. - */ - struct sci_base_state_machine state_machine; - - /** - * This field specifies the port object that owns/contains this phy. - */ - struct scic_sds_port *owning_port; - - /** - * This field indicates whether the phy supports 1.5 Gb/s, 3.0 Gb/s, - * or 6.0 Gb/s operation. - */ - enum sas_linkrate max_negotiated_speed; - - /** - * This member specifies the protocol being utilized on this phy. This - * field contains a legitamite value once the PHY has link trained with - * a remote phy. - */ - enum scic_sds_phy_protocol protocol; - - /** - * This field specifies the index with which this phy is associated (0-3). - */ - u8 phy_index; - - /** - * This member indicates if this particular PHY has received a BCN while - * it had no port assignement. This BCN will be reported once the phy is - * assigned to a port. - */ - bool bcn_received_while_port_unassigned; - - /** - * This field indicates if this PHY is currently in the process of - * link training (i.e. it has started OOB, but has yet to perform - * IAF exchange/Signature FIS reception). - */ - bool is_in_link_training; - - /** - * This field contains a reference to the timer utilized in detecting - * when a signature FIS timeout has occurred. The signature FIS is the - * first FIS sent by an attached SATA device after OOB/SN. - */ - void *sata_timeout_timer; - - const struct scic_sds_phy_state_handler *state_handlers; - - struct sci_base_state_machine starting_substate_machine; - - /** - * This field is the pointer to the transport layer register for the SCU - * hardware. - */ - struct scu_transport_layer_registers __iomem *transport_layer_registers; - - /** - * This field points to the link layer register set within the SCU. - */ - struct scu_link_layer_registers __iomem *link_layer_registers; - -}; - -typedef enum sci_status (*scic_sds_phy_handler_t)(struct scic_sds_phy *); -typedef enum sci_status (*scic_sds_phy_event_handler_t)(struct scic_sds_phy *, u32); -typedef enum sci_status (*scic_sds_phy_frame_handler_t)(struct scic_sds_phy *, u32); -typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); - -/** - * struct scic_sds_phy_state_handler - - * - * - */ -struct scic_sds_phy_state_handler { - /** - * The start_handler specifies the method invoked when there is an - * attempt to start a phy. - */ - scic_sds_phy_handler_t start_handler; - - /** - * The stop_handler specifies the method invoked when there is an - * attempt to stop a phy. - */ - scic_sds_phy_handler_t stop_handler; - - /** - * The reset_handler specifies the method invoked when there is an - * attempt to reset a phy. - */ - scic_sds_phy_handler_t reset_handler; - - /** - * The destruct_handler specifies the method invoked when attempting to - * destruct a phy. - */ - scic_sds_phy_handler_t destruct_handler; - - /** - * The state handler for unsolicited frames received from the SCU hardware. - */ - scic_sds_phy_frame_handler_t frame_handler; - - /** - * The state handler for events received from the SCU hardware. - */ - scic_sds_phy_event_handler_t event_handler; - - /** - * The state handler for staggered spinup. - */ - scic_sds_phy_power_handler_t consume_power_handler; - -}; - -/** - * scic_sds_phy_get_index() - - * - * This macro returns the phy index for the specified phy - */ -#define scic_sds_phy_get_index(phy) \ - ((phy)->phy_index) - -/** - * scic_sds_phy_get_controller() - This macro returns the controller for this - * phy - * - * - */ -#define scic_sds_phy_get_controller(phy) \ - (scic_sds_port_get_controller((phy)->owning_port)) - -/** - * scic_sds_phy_set_state_handlers() - This macro sets the state handlers for - * this phy object - * - * - */ -#define scic_sds_phy_set_state_handlers(phy, handlers) \ - ((phy)->state_handlers = (handlers)) - -/** - * scic_sds_phy_set_base_state_handlers() - - * - * This macro set the base state handlers for the phy object. - */ -#define scic_sds_phy_set_base_state_handlers(phy, state_id) \ - scic_sds_phy_set_state_handlers(\ - (phy), \ - &scic_sds_phy_state_handler_table[(state_id)] \ - ) - -void scic_sds_phy_construct( - struct scic_sds_phy *this_phy, - struct scic_sds_port *owning_port, - u8 phy_index); - -struct scic_sds_port *scic_sds_phy_get_port( - struct scic_sds_phy *this_phy); - -void scic_sds_phy_set_port( - struct scic_sds_phy *this_phy, - struct scic_sds_port *owning_port); - -enum sci_status scic_sds_phy_initialize( - struct scic_sds_phy *this_phy, - struct scu_transport_layer_registers __iomem *transport_layer_registers, - struct scu_link_layer_registers __iomem *link_layer_registers); - -enum sci_status scic_sds_phy_start( - struct scic_sds_phy *this_phy); - -enum sci_status scic_sds_phy_stop( - struct scic_sds_phy *this_phy); - -enum sci_status scic_sds_phy_reset( - struct scic_sds_phy *this_phy); - -void scic_sds_phy_resume( - struct scic_sds_phy *this_phy); - -void scic_sds_phy_setup_transport( - struct scic_sds_phy *this_phy, - u32 device_id); - -enum sci_status scic_sds_phy_event_handler( - struct scic_sds_phy *this_phy, - u32 event_code); - -enum sci_status scic_sds_phy_frame_handler( - struct scic_sds_phy *this_phy, - u32 frame_index); - -enum sci_status scic_sds_phy_consume_power_handler( - struct scic_sds_phy *this_phy); - -void scic_sds_phy_get_sas_address( - struct scic_sds_phy *this_phy, - struct sci_sas_address *sas_address); - -void scic_sds_phy_get_attached_sas_address( - struct scic_sds_phy *this_phy, - struct sci_sas_address *sas_address); - -void scic_sds_phy_get_protocols( - struct scic_sds_phy *sci_phy, - struct scic_phy_proto *protocols); - -#endif /* _SCIC_SDS_PHY_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index a9f3ce111b86..11b516a9a130 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -54,9 +54,7 @@ */ #include "host.h" -#include "scic_phy.h" #include "scic_port.h" -#include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_device.h" #include "remote_node_context.h" diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h index 56a40a712589..7fd161700475 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h @@ -64,7 +64,6 @@ */ #include "scic_sds_port.h" -#include "scic_sds_phy.h" struct scic_sds_controller; struct scic_sds_port_configuration_agent; diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 1134395c970e..b92d51f25481 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -56,12 +56,2219 @@ #include "isci.h" #include "host.h" #include "phy.h" +#include "scu_event_codes.h" #include "scic_port.h" #include "scic_config_parameters.h" +#include "timers.h" -struct scic_sds_phy; -extern enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy); -extern enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy); +/* Maximum arbitration wait time in micro-seconds */ +#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700) + +enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy) +{ + return sci_phy->max_negotiated_speed; +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY Internal Methods + * ***************************************************************************** */ + +/** + * This method will initialize the phy transport layer registers + * @sci_phy: + * @transport_layer_registers + * + * enum sci_status + */ +static enum sci_status scic_sds_phy_transport_layer_initialization( + struct scic_sds_phy *sci_phy, + struct scu_transport_layer_registers __iomem *transport_layer_registers) +{ + u32 tl_control; + + sci_phy->transport_layer_registers = transport_layer_registers; + + writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX, + &sci_phy->transport_layer_registers->stp_rni); + + /* + * Hardware team recommends that we enable the STP prefetch for all + * transports + */ + tl_control = readl(&sci_phy->transport_layer_registers->control); + tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); + writel(tl_control, &sci_phy->transport_layer_registers->control); + + return SCI_SUCCESS; +} + +/** + * This method will initialize the phy link layer registers + * @sci_phy: + * @link_layer_registers: + * + * enum sci_status + */ +static enum sci_status +scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, + struct scu_link_layer_registers __iomem *link_layer_registers) +{ + struct scic_sds_controller *scic = + sci_phy->owning_port->owning_controller; + int phy_idx = sci_phy->phy_index; + struct sci_phy_user_params *phy_user = + &scic->user_parameters.sds1.phys[phy_idx]; + struct sci_phy_oem_params *phy_oem = + &scic->oem_parameters.sds1.phys[phy_idx]; + u32 phy_configuration; + struct scic_phy_cap phy_cap; + u32 parity_check = 0; + u32 parity_count = 0; + u32 llctl, link_rate; + u32 clksm_value = 0; + + sci_phy->link_layer_registers = link_layer_registers; + + /* Set our IDENTIFY frame data */ + #define SCI_END_DEVICE 0x01 + + writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | + SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), + &sci_phy->link_layer_registers->transmit_identification); + + /* Write the device SAS Address */ + writel(0xFEDCBA98, + &sci_phy->link_layer_registers->sas_device_name_high); + writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low); + + /* Write the source SAS Address */ + writel(phy_oem->sas_address.high, + &sci_phy->link_layer_registers->source_sas_address_high); + writel(phy_oem->sas_address.low, + &sci_phy->link_layer_registers->source_sas_address_low); + + /* Clear and Set the PHY Identifier */ + writel(0, &sci_phy->link_layer_registers->identify_frame_phy_id); + writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), + &sci_phy->link_layer_registers->identify_frame_phy_id); + + /* Change the initial state of the phy configuration register */ + phy_configuration = + readl(&sci_phy->link_layer_registers->phy_configuration); + + /* Hold OOB state machine in reset */ + phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(phy_configuration, + &sci_phy->link_layer_registers->phy_configuration); + + /* Configure the SNW capabilities */ + phy_cap.all = 0; + phy_cap.start = 1; + phy_cap.gen3_no_ssc = 1; + phy_cap.gen2_no_ssc = 1; + phy_cap.gen1_no_ssc = 1; + if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) { + phy_cap.gen3_ssc = 1; + phy_cap.gen2_ssc = 1; + phy_cap.gen1_ssc = 1; + } + + /* + * The SAS specification indicates that the phy_capabilities that + * are transmitted shall have an even parity. Calculate the parity. */ + parity_check = phy_cap.all; + while (parity_check != 0) { + if (parity_check & 0x1) + parity_count++; + parity_check >>= 1; + } + + /* + * If parity indicates there are an odd number of bits set, then + * set the parity bit to 1 in the phy capabilities. */ + if ((parity_count % 2) != 0) + phy_cap.parity = 1; + + writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities); + + /* Set the enable spinup period but disable the ability to send + * notify enable spinup + */ + writel(SCU_ENSPINUP_GEN_VAL(COUNT, + phy_user->notify_enable_spin_up_insertion_frequency), + &sci_phy->link_layer_registers->notify_enable_spinup_control); + + /* Write the ALIGN Insertion Ferequency for connected phy and + * inpendent of connected state + */ + clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED, + phy_user->in_connection_align_insertion_frequency); + + clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, + phy_user->align_insertion_frequency); + + writel(clksm_value, &sci_phy->link_layer_registers->clock_skew_management); + + /* @todo Provide a way to write this register correctly */ + writel(0x02108421, + &sci_phy->link_layer_registers->afe_lookup_table_control); + + llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, + (u8)scic->user_parameters.sds1.no_outbound_task_timeout); + + switch(phy_user->max_speed_generation) { + case SCIC_SDS_PARM_GEN3_SPEED: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3; + break; + case SCIC_SDS_PARM_GEN2_SPEED: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2; + break; + default: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1; + break; + } + llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); + writel(llctl, &sci_phy->link_layer_registers->link_layer_control); + + if (is_a0() || is_a2()) { + /* Program the max ARB time for the PHY to 700us so we inter-operate with + * the PMC expander which shuts down PHYs if the expander PHY generates too + * many breaks. This time value will guarantee that the initiator PHY will + * generate the break. + */ + writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, + &sci_phy->link_layer_registers->maximum_arbitration_wait_timer_timeout); + } + + /* + * Set the link layer hang detection to 500ms (0x1F4) from its default + * value of 128ms. Max value is 511 ms. + */ + writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout); + + /* We can exit the initial state to the stopped state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STOPPED); + + return SCI_SUCCESS; +} + +/** + * This function will handle the sata SIGNATURE FIS timeout condition. It will + * restart the starting substate machine since we dont know what has actually + * happening. + */ +static void scic_sds_phy_sata_timeout(void *phy) +{ + struct scic_sds_phy *sci_phy = phy; + + dev_dbg(sciphy_to_dev(sci_phy), + "%s: SCIC SDS Phy 0x%p did not receive signature fis before " + "timeout.\n", + __func__, + sci_phy); + + sci_base_state_machine_stop(&sci_phy->starting_substate_machine); + + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); +} + +/** + * This method returns the port currently containing this phy. If the phy is + * currently contained by the dummy port, then the phy is considered to not + * be part of a port. + * @sci_phy: This parameter specifies the phy for which to retrieve the + * containing port. + * + * This method returns a handle to a port that contains the supplied phy. + * NULL This value is returned if the phy is not part of a real + * port (i.e. it's contained in the dummy port). !NULL All other + * values indicate a handle/pointer to the port containing the phy. + */ +struct scic_sds_port *scic_sds_phy_get_port( + struct scic_sds_phy *sci_phy) +{ + if (scic_sds_port_get_index(sci_phy->owning_port) == SCIC_SDS_DUMMY_PORT) + return NULL; + + return sci_phy->owning_port; +} + +/** + * This method will assign a port to the phy object. + * @out]: sci_phy This parameter specifies the phy for which to assign a port + * object. + * + * + */ +void scic_sds_phy_set_port( + struct scic_sds_phy *sci_phy, + struct scic_sds_port *sci_port) +{ + sci_phy->owning_port = sci_port; + + if (sci_phy->bcn_received_while_port_unassigned) { + sci_phy->bcn_received_while_port_unassigned = false; + scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); + } +} + +/** + * This method will initialize the constructed phy + * @sci_phy: + * @link_layer_registers: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_initialize( + struct scic_sds_phy *sci_phy, + struct scu_transport_layer_registers __iomem *transport_layer_registers, + struct scu_link_layer_registers __iomem *link_layer_registers) +{ + struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); + struct isci_host *ihost = scic_to_ihost(scic); + + /* Create the SIGNATURE FIS Timeout timer for this phy */ + sci_phy->sata_timeout_timer = + isci_timer_create( + ihost, + sci_phy, + scic_sds_phy_sata_timeout); + + /* Perfrom the initialization of the TL hardware */ + scic_sds_phy_transport_layer_initialization( + sci_phy, + transport_layer_registers); + + /* Perofrm the initialization of the PE hardware */ + scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers); + + /* + * There is nothing that needs to be done in this state just + * transition to the stopped state. */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STOPPED); + + return SCI_SUCCESS; +} + +/** + * This method assigns the direct attached device ID for this phy. + * + * @sci_phy The phy for which the direct attached device id is to + * be assigned. + * @device_id The direct attached device ID to assign to the phy. + * This will either be the RNi for the device or an invalid RNi if there + * is no current device assigned to the phy. + */ +void scic_sds_phy_setup_transport( + struct scic_sds_phy *sci_phy, + u32 device_id) +{ + u32 tl_control; + + writel(device_id, &sci_phy->transport_layer_registers->stp_rni); + + /* + * The read should guarantee that the first write gets posted + * before the next write + */ + tl_control = readl(&sci_phy->transport_layer_registers->control); + tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); + writel(tl_control, &sci_phy->transport_layer_registers->control); +} + +/** + * + * @sci_phy: The phy object to be suspended. + * + * This function will perform the register reads/writes to suspend the SCU + * hardware protocol engine. none + */ +static void scic_sds_phy_suspend( + struct scic_sds_phy *sci_phy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); + + scic_sds_phy_setup_transport( + sci_phy, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); +} + +void scic_sds_phy_resume(struct scic_sds_phy *sci_phy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); +} + +void scic_sds_phy_get_sas_address(struct scic_sds_phy *sci_phy, + struct sci_sas_address *sas_address) +{ + sas_address->high = readl(&sci_phy->link_layer_registers->source_sas_address_high); + sas_address->low = readl(&sci_phy->link_layer_registers->source_sas_address_low); +} + +void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy, + struct sci_sas_address *sas_address) +{ + struct sas_identify_frame *iaf; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + iaf = &iphy->frame_rcvd.iaf; + memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE); +} + +void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy, + struct scic_phy_proto *protocols) +{ + protocols->all = + (u16)(readl(&sci_phy-> + link_layer_registers->transmit_identification) & + 0x0000FFFF); +} + +/** + * This method will attempt to start the phy object. This request is only valid + * when the phy is in the stopped state + * @sci_phy: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) +{ + return sci_phy->state_handlers->start_handler(sci_phy); +} + +/** + * This method will attempt to stop the phy object. + * @sci_phy: + * + * enum sci_status SCI_SUCCESS if the phy is going to stop SCI_INVALID_STATE + * if the phy is not in a valid state to stop + */ +enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) +{ + return sci_phy->state_handlers->stop_handler(sci_phy); +} + +/** + * This method will attempt to reset the phy. This request is only valid when + * the phy is in an ready state + * @sci_phy: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_reset( + struct scic_sds_phy *sci_phy) +{ + return sci_phy->state_handlers->reset_handler(sci_phy); +} + +/** + * This method will process the event code received. + * @sci_phy: + * @event_code: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + return sci_phy->state_handlers->event_handler(sci_phy, event_code); +} + +/** + * This method will process the frame index received. + * @sci_phy: + * @frame_index: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_frame_handler( + struct scic_sds_phy *sci_phy, + u32 frame_index) +{ + return sci_phy->state_handlers->frame_handler(sci_phy, frame_index); +} + +/** + * This method will give the phy permission to consume power + * @sci_phy: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_consume_power_handler( + struct scic_sds_phy *sci_phy) +{ + return sci_phy->state_handlers->consume_power_handler(sci_phy); +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY HELPER FUNCTIONS + * ***************************************************************************** */ + + +/** + * + * @sci_phy: The phy object that received SAS PHY DETECTED. + * + * This method continues the link training for the phy as if it were a SAS PHY + * instead of a SATA PHY. This is done because the completion queue had a SAS + * PHY DETECTED event when the state machine was expecting a SATA PHY event. + * none + */ +static void scic_sds_phy_start_sas_link_training( + struct scic_sds_phy *sci_phy) +{ + u32 phy_control; + + phy_control = + readl(&sci_phy->link_layer_registers->phy_configuration); + phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); + writel(phy_control, + &sci_phy->link_layer_registers->phy_configuration); + + sci_base_state_machine_change_state( + &sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN + ); + + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; +} + +/** + * + * @sci_phy: The phy object that received a SATA SPINUP HOLD event + * + * This method continues the link training for the phy as if it were a SATA PHY + * instead of a SAS PHY. This is done because the completion queue had a SATA + * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none + */ +static void scic_sds_phy_start_sata_link_training( + struct scic_sds_phy *sci_phy) +{ + sci_base_state_machine_change_state( + &sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER + ); + + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; +} + +/** + * scic_sds_phy_complete_link_training - perform processing common to + * all protocols upon completion of link training. + * @sci_phy: This parameter specifies the phy object for which link training + * has completed. + * @max_link_rate: This parameter specifies the maximum link rate to be + * associated with this phy. + * @next_state: This parameter specifies the next state for the phy's starting + * sub-state machine. + * + */ +static void scic_sds_phy_complete_link_training( + struct scic_sds_phy *sci_phy, + enum sas_linkrate max_link_rate, + u32 next_state) +{ + sci_phy->max_negotiated_speed = max_link_rate; + + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + next_state); +} + +static void scic_sds_phy_restart_starting_state( + struct scic_sds_phy *sci_phy) +{ + /* Stop the current substate machine */ + sci_base_state_machine_stop(&sci_phy->starting_substate_machine); + + /* Re-enter the base state machine starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); +} + +/* **************************************************************************** + * SCIC SDS PHY general handlers + ************************************************************************** */ +static enum sci_status scic_sds_phy_starting_substate_general_stop_handler( + struct scic_sds_phy *phy) +{ + sci_base_state_machine_stop(&phy->starting_substate_machine); + + sci_base_state_machine_change_state(&phy->state_machine, + SCI_BASE_PHY_STATE_STOPPED); + + return SCI_SUCCESS; +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY EVENT_HANDLERS + * ***************************************************************************** */ + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - + * decode the event - sas phy detected causes a state transition to the wait + * for speed event notification. - any other events log a warning message and + * set a failure status enum sci_status SCI_SUCCESS on any valid event notification + * SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + scic_sds_phy_start_sas_link_training(sci_phy); + sci_phy->is_in_link_training = true; + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + scic_sds_phy_start_sata_link_training(sci_phy); + sci_phy->is_in_link_training = true; + break; + + default: + dev_dbg(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - + * decode the event - sas phy detected returns us back to this state. - speed + * event detected causes a state transition to the wait for iaf. - identify + * timeout is an un-expected event and the state machine is restarted. - link + * failure events restart the starting state machine - any other events log a + * warning message and set a failure status enum sci_status SCI_SUCCESS on any valid + * event notification SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * Why is this being reported again by the controller? + * We would re-enter this state so just stay here */ + break; + + case SCU_EVENT_SAS_15: + case SCU_EVENT_SAS_15_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_1_5_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); + break; + + case SCU_EVENT_SAS_30: + case SCU_EVENT_SAS_30_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_3_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); + break; + + case SCU_EVENT_SAS_60: + case SCU_EVENT_SAS_60_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_6_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + /* + * We were doing SAS PHY link training and received a SATA PHY event + * continue OOB/SN as if this were a SATA PHY */ + scic_sds_phy_start_sata_link_training(sci_phy); + break; + + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - + * decode the event - sas phy detected event backs up the state machine to the + * await speed notification. - identify timeout is an un-expected event and the + * state machine is restarted. - link failure events restart the starting state + * machine - any other events log a warning message and set a failure status + * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any + * unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + /* Backup the state machine */ + scic_sds_phy_start_sas_link_training(sci_phy); + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + /* + * We were doing SAS PHY link training and received a SATA PHY event + * continue OOB/SN as if this were a SATA PHY */ + scic_sds_phy_start_sata_link_training(sci_phy); + break; + + case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: + case SCU_EVENT_LINK_FAILURE: + case SCU_EVENT_HARD_RESET_RECEIVED: + /* Start the oob/sn state machine over again */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_POWER. - + * decode the event - link failure events restart the starting state machine - + * any other events log a warning message and set a failure status enum sci_status + * SCI_SUCCESS on a link failure event SCI_FAILURE on any unexpected event + * notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received unexpected " + "event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - + * decode the event - link failure events restart the starting state machine - + * sata spinup hold events are ignored since they are expected - any other + * events log a warning message and set a failure status enum sci_status SCI_SUCCESS + * on a link failure event SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + /* These events are received every 10ms and are expected while in this state */ + break; + + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. */ + scic_sds_phy_start_sas_link_training(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * scic_sds_phy_starting_substate_await_sata_phy_event_handler - + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - + * decode the event - link failure events restart the starting state machine - + * sata spinup hold events are ignored since they are expected - sata phy + * detected event change to the wait speed event - any other events log a + * warning message and set a failure status enum sci_status SCI_SUCCESS on a link + * failure event SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handler( + struct scic_sds_phy *sci_phy, u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + /* These events might be received since we dont know how many may be in + * the completion queue while waiting for power + */ + break; + + case SCU_EVENT_SATA_PHY_DETECTED: + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; + + /* We have received the SATA PHY notification change state */ + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); + break; + + case SCU_EVENT_SAS_PHY_DETECTED: + /* There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. + */ + scic_sds_phy_start_sas_link_training(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. + * - decode the event - sata phy detected returns us back to this state. - + * speed event detected causes a state transition to the wait for signature. - + * link failure events restart the starting state machine - any other events + * log a warning message and set a failure status enum sci_status SCI_SUCCESS on any + * valid event notification SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SATA_PHY_DETECTED: + /* + * The hardware reports multiple SATA PHY detected events + * ignore the extras */ + break; + + case SCU_EVENT_SATA_15: + case SCU_EVENT_SATA_15_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_1_5_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + break; + + case SCU_EVENT_SATA_30: + case SCU_EVENT_SATA_30_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_3_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + break; + + case SCU_EVENT_SATA_60: + case SCU_EVENT_SATA_60_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_6_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + break; + + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. */ + scic_sds_phy_start_sas_link_training(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * scic_sds_phy_starting_substate_await_sig_fis_event_handler - + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - + * decode the event - sas phy detected event backs up the state machine to the + * await speed notification. - identify timeout is an un-expected event and the + * state machine is restarted. - link failure events restart the starting state + * machine - any other events log a warning message and set a failure status + * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any + * unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handler( + struct scic_sds_phy *sci_phy, u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SATA_PHY_DETECTED: + /* Backup the state machine */ + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); + break; + + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + + +/* + * ***************************************************************************** + * * SCIC SDS PHY FRAME_HANDLERS + * ***************************************************************************** */ + +/** + * + * @phy: This is struct scic_sds_phy object which is being requested to decode the + * frame data. + * @frame_index: This is the index of the unsolicited frame which was received + * for this phy. + * + * This method decodes the unsolicited frame when the struct scic_sds_phy is in the + * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Get the UF Header - If the UF + * is an IAF - Copy IAF data to local phy object IAF data buffer. - Change + * starting substate to wait power. - else - log warning message of unexpected + * unsolicted frame - release frame buffer enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler( + struct scic_sds_phy *sci_phy, u32 frame_index) +{ + enum sci_status result; + u32 *frame_words; + struct sas_identify_frame iaf; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + result = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_phy_get_controller(sci_phy)->uf_control), + frame_index, + (void **)&frame_words); + + if (result != SCI_SUCCESS) + return result; + + sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32)); + if (iaf.frame_type == 0) { + u32 state; + + memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); + if (iaf.smp_tport) { + /* We got the IAF for an expander PHY go to the final + * state since there are no power requirements for + * expander phys. + */ + state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL; + } else { + /* We got the IAF we can now go to the await spinup + * semaphore state + */ + state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; + } + sci_base_state_machine_change_state( + &sci_phy->starting_substate_machine, + state); + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, + frame_index); + + scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), + frame_index); + + return result; +} + +/** + * + * @phy: This is struct scic_sds_phy object which is being requested to decode the + * frame data. + * @frame_index: This is the index of the unsolicited frame which was received + * for this phy. + * + * This method decodes the unsolicited frame when the struct scic_sds_phy is in the + * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Get the UF Header - If + * the UF is an SIGNATURE FIS - Copy IAF data to local phy object SIGNATURE FIS + * data buffer. - else - log warning message of unexpected unsolicted frame - + * release frame buffer enum sci_status SCI_SUCCESS Must decode the SIGNATURE FIS + * data + */ +static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handler( + struct scic_sds_phy *sci_phy, + u32 frame_index) +{ + enum sci_status result; + struct dev_to_host_fis *frame_header; + u32 *fis_frame_data; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + result = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_phy_get_controller(sci_phy)->uf_control), + frame_index, + (void **)&frame_header); + + if (result != SCI_SUCCESS) + return result; + + if ((frame_header->fis_type == FIS_REGD2H) && + !(frame_header->status & ATA_BUSY)) { + scic_sds_unsolicited_frame_control_get_buffer( + &(scic_sds_phy_get_controller(sci_phy)->uf_control), + frame_index, + (void **)&fis_frame_data); + + scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis, + frame_header, + fis_frame_data); + + /* got IAF we can now go to the await spinup semaphore state */ + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); + + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, + frame_index); + + /* Regardless of the result we are done with this frame with it */ + scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), + frame_index); + + return result; +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY POWER_HANDLERS + * ***************************************************************************** */ + +/* + * This method is called by the struct scic_sds_controller when the phy object is + * granted power. - The notify enable spinups are turned on for this phy object + * - The phy state machine is transitioned to the + * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler( + struct scic_sds_phy *sci_phy) +{ + u32 enable_spinup; + + enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); + enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); + writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control); + + /* Change state to the final state this substate machine has run to completion */ + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); + + return SCI_SUCCESS; +} + +/* + * This method is called by the struct scic_sds_controller when the phy object is + * granted power. - The phy state machine is transitioned to the + * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler( + struct scic_sds_phy *sci_phy) +{ + u32 scu_sas_pcfg_value; + + /* Release the spinup hold state and reset the OOB state machine */ + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value &= + ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); + + /* Now restart the OOB operation */ + scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); + + /* Change state to the final state this substate machine has run to completion */ + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); + + return SCI_SUCCESS; +} + +static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, + const char *func) +{ + dev_dbg(sciphy_to_dev(sci_phy), + "%s: in wrong state: %d\n", func, + sci_base_state_machine_get_state(&sci_phy->state_machine)); + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status +scic_sds_phy_default_start_handler(struct scic_sds_phy *sci_phy) +{ + return default_phy_handler(sci_phy, __func__); +} + +static enum sci_status +scic_sds_phy_default_stop_handler(struct scic_sds_phy *sci_phy) +{ + return default_phy_handler(sci_phy, __func__); +} + +static enum sci_status +scic_sds_phy_default_reset_handler(struct scic_sds_phy *sci_phy) +{ + return default_phy_handler(sci_phy, __func__); +} + +static enum sci_status +scic_sds_phy_default_destroy_handler(struct scic_sds_phy *sci_phy) +{ + return default_phy_handler(sci_phy, __func__); +} + +static enum sci_status +scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy, + u32 frame_index) +{ + struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); + + default_phy_handler(sci_phy, __func__); + scic_sds_controller_release_frame(scic, frame_index); + + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status +scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) +{ + return default_phy_handler(sci_phy, __func__); +} + +static enum sci_status +scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) +{ + return default_phy_handler(sci_phy, __func__); +} + + + +static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = { + [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_ossp_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_iaf_uf_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sas_power_event_handler, + .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sata_power_event_handler, + .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sata_phy_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sata_speed_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sig_fis_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + } +}; + +/** + * scic_sds_phy_set_starting_substate_handlers() - + * + * This macro sets the starting substate handlers by state_id + */ +#define scic_sds_phy_set_starting_substate_handlers(phy, state_id) \ + scic_sds_phy_set_state_handlers(\ + (phy), \ + &scic_sds_phy_starting_substate_handler_table[(state_id)] \ + ) + +/* + * **************************************************************************** + * * PHY STARTING SUBSTATE METHODS + * **************************************************************************** */ + +/** + * scic_sds_phy_starting_initial_substate_enter - + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state + * handlers are put in place for the struct scic_sds_phy object. - The state is + * changed to the wait phy type event notification. none + */ +static void scic_sds_phy_starting_initial_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); + + /* This is just an temporary state go off to the starting state */ + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( + void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the + * struct scic_sds_phy object state handlers for this state. - Add this phy object to + * the power control queue none + */ +static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER + ); + + scic_sds_controller_power_control_queue_insert( + scic_sds_phy_get_controller(sci_phy), + sci_phy + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the + * struct scic_sds_phy object from the power control queue. none + */ +static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_controller_power_control_queue_remove( + scic_sds_phy_get_controller(sci_phy), sci_phy + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the + * struct scic_sds_phy object state handlers for this state. - Add this phy object to + * the power control queue none + */ +static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER + ); + + scic_sds_controller_power_control_queue_insert( + scic_sds_phy_get_controller(sci_phy), + sci_phy + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the + * struct scic_sds_phy object from the power control queue. none + */ +static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_controller_power_control_queue_remove( + scic_sds_phy_get_controller(sci_phy), + sci_phy + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This function will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); + + isci_timer_start(sci_phy->sata_timeout_timer, + SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy + * on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer + * that was started on entry to await sata phy event notification none + */ +static inline void scic_sds_phy_starting_await_sata_phy_substate_exit( + void *object) +{ + struct scic_sds_phy *sci_phy = object; + + isci_timer_stop(sci_phy->sata_timeout_timer); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); + + isci_timer_start(sci_phy->sata_timeout_timer, + SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This function will perform the actions required by the + * struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer + * that was started on entry to await sata phy event notification none + */ +static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( + void *object) +{ + struct scic_sds_phy *sci_phy = object; + + isci_timer_stop(sci_phy->sata_timeout_timer); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This function will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the + * struct scic_sds_phy object state handlers for this state. + * - Start the SIGNATURE FIS + * timeout timer none + */ +static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) +{ + bool continue_to_ready_state; + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + + continue_to_ready_state = scic_sds_port_link_detected( + sci_phy->owning_port, + sci_phy); + + if (continue_to_ready_state) { + /* + * Clear the PE suspend condition so we can actually + * receive SIG FIS + * The hardware will not respond to the XRDY until the PE + * suspend condition is cleared. + */ + scic_sds_phy_resume(sci_phy); + + isci_timer_start(sci_phy->sata_timeout_timer, + SCIC_SDS_SIGNATURE_FIS_TIMEOUT); + } else + sci_phy->is_in_link_training = false; +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This function will perform the actions required by the + * struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE + * FIS timeout timer. none + */ +static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( + void *object) +{ + struct scic_sds_phy *sci_phy = object; + + isci_timer_stop(sci_phy->sata_timeout_timer); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy + * object state handlers for this state. - Change base state machine to the + * ready state. none + */ +static void scic_sds_phy_starting_final_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers(sci_phy, + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); + + /* State machine has run to completion so exit out and change + * the base state machine to the ready state + */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_READY); +} + +/* --------------------------------------------------------------------------- */ + +static const struct sci_base_state scic_sds_phy_starting_substates[] = { + [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { + .enter_state = scic_sds_phy_starting_initial_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { + .enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { + .enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { + .enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { + .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter, + .exit_state = scic_sds_phy_starting_await_sas_power_substate_exit, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { + .enter_state = scic_sds_phy_starting_await_sata_power_substate_enter, + .exit_state = scic_sds_phy_starting_await_sata_power_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { + .enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter, + .exit_state = scic_sds_phy_starting_await_sata_phy_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { + .enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter, + .exit_state = scic_sds_phy_starting_await_sata_speed_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { + .enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter, + .exit_state = scic_sds_phy_starting_await_sig_fis_uf_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { + .enter_state = scic_sds_phy_starting_final_substate_enter, + } +}; + +/* + * This method takes the struct scic_sds_phy from a stopped state and + * attempts to start it. - The phy state machine is transitioned to the + * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS + */ +static enum sci_status +scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy) +{ + struct isci_host *ihost; + struct scic_sds_controller *scic; + + scic = scic_sds_phy_get_controller(sci_phy), + ihost = scic_to_ihost(scic); + + /* Create the SIGNATURE FIS Timeout timer for this phy */ + sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, + scic_sds_phy_sata_timeout); + + if (sci_phy->sata_timeout_timer) + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + + return SCI_SUCCESS; +} + +static enum sci_status +scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy) +{ + return SCI_SUCCESS; +} + +static enum sci_status +scic_sds_phy_ready_state_stop_handler(struct scic_sds_phy *sci_phy) +{ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STOPPED); + + return SCI_SUCCESS; +} + +static enum sci_status +scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy) +{ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_RESETTING); + + return SCI_SUCCESS; +} + +/** + * scic_sds_phy_ready_state_event_handler - + * @phy: This is the struct scic_sds_phy object which has received the event. + * + * This method request the struct scic_sds_phy handle the received event. The only + * event that we are interested in while in the ready state is the link failure + * event. - decoded event is a link failure - transition the struct scic_sds_phy back + * to the SCI_BASE_PHY_STATE_STARTING state. - any other event received will + * report a warning message enum sci_status SCI_SUCCESS if the event received is a + * link failure SCI_FAILURE_INVALID_STATE for any other event received. + */ +static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) +{ + enum sci_status result = SCI_FAILURE; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + result = SCI_SUCCESS; + break; + + case SCU_EVENT_BROADCAST_CHANGE: + /* Broadcast change received. Notify the port. */ + if (scic_sds_phy_get_port(sci_phy) != NULL) + scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); + else + sci_phy->bcn_received_while_port_unassigned = true; + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%sP SCIC PHY 0x%p ready state machine received " + "unexpected event_code %x\n", + __func__, sci_phy, event_code); + + result = SCI_FAILURE_INVALID_STATE; + break; + } + + return result; +} + +static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) +{ + enum sci_status result = SCI_FAILURE; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_HARD_RESET_TRANSMITTED: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + result = SCI_SUCCESS; + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: SCIC PHY 0x%p resetting state machine received " + "unexpected event_code %x\n", + __func__, sci_phy, event_code); + + result = SCI_FAILURE_INVALID_STATE; + break; + } + + return result; +} + +/* --------------------------------------------------------------------------- */ + +static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { + [SCI_BASE_PHY_STATE_INITIAL] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_STOPPED] = { + .start_handler = scic_sds_phy_stopped_state_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_stopped_state_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_STARTING] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_READY] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_ready_state_stop_handler, + .reset_handler = scic_sds_phy_ready_state_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_ready_state_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_RESETTING] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_resetting_state_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_FINAL] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + } +}; + +/* + * **************************************************************************** + * * PHY STATE PRIVATE METHODS + * **************************************************************************** */ + +/** + * + * @sci_phy: This is the struct scic_sds_phy object to stop. + * + * This method will stop the struct scic_sds_phy object. This does not reset the + * protocol engine it just suspends it and places it in a state where it will + * not cause the end device to power up. none + */ +static void scu_link_layer_stop_protocol_engine( + struct scic_sds_phy *sci_phy) +{ + u32 scu_sas_pcfg_value; + u32 enable_spinup_value; + + /* Suspend the protocol engine and place it in a sata spinup hold state */ + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= + (SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) | + SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD)); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); + + /* Disable the notify enable spinup primitives */ + enable_spinup_value = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); + enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE); + writel(enable_spinup_value, &sci_phy->link_layer_registers->notify_enable_spinup_control); +} + +/** + * + * + * This method will start the OOB/SN state machine for this struct scic_sds_phy object. + */ +static void scu_link_layer_start_oob( + struct scic_sds_phy *sci_phy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + scu_sas_pcfg_value &= + ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); +} + +/** + * + * + * This method will transmit a hard reset request on the specified phy. The SCU + * hardware requires that we reset the OOB state machine and set the hard reset + * bit in the phy configuration register. We then must start OOB over with the + * hard reset bit set. + */ +static void scu_link_layer_tx_hard_reset( + struct scic_sds_phy *sci_phy) +{ + u32 phy_configuration_value; + + /* + * SAS Phys must wait for the HARD_RESET_TX event notification to transition + * to the starting state. */ + phy_configuration_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + phy_configuration_value |= + (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | + SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); + writel(phy_configuration_value, + &sci_phy->link_layer_registers->phy_configuration); + + /* Now take the OOB state machine out of reset */ + phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(phy_configuration_value, + &sci_phy->link_layer_registers->phy_configuration); +} + +/* + * **************************************************************************** + * * PHY BASE STATE METHODS + * **************************************************************************** */ + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state + * handlers for the phy object base state machine initial state. none + */ +static void scic_sds_phy_initial_state_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This function will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state + * handlers for the phy object base state machine initial state. - The SCU + * hardware is requested to stop the protocol engine. none + */ +static void scic_sds_phy_stopped_state_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); + struct isci_host *ihost = scic_to_ihost(scic); + + /* + * @todo We need to get to the controller to place this PE in a + * reset state + */ + + scic_sds_phy_set_base_state_handlers(sci_phy, + SCI_BASE_PHY_STATE_STOPPED); + + if (sci_phy->sata_timeout_timer != NULL) { + isci_del_timer(ihost, sci_phy->sata_timeout_timer); + + sci_phy->sata_timeout_timer = NULL; + } + + scu_link_layer_stop_protocol_engine(sci_phy); + + if (sci_phy->state_machine.previous_state_id != + SCI_BASE_PHY_STATE_INITIAL) + scic_sds_controller_link_down( + scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state + * handlers for the phy object base state machine starting state. - The SCU + * hardware is requested to start OOB/SN on this protocl engine. - The phy + * starting substate machine is started. - If the previous state was the ready + * state then the struct scic_sds_controller is informed that the phy has gone link + * down. none + */ +static void scic_sds_phy_starting_state_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING); + + scu_link_layer_stop_protocol_engine(sci_phy); + scu_link_layer_start_oob(sci_phy); + + /* We don't know what kind of phy we are going to be just yet */ + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + sci_phy->bcn_received_while_port_unassigned = false; + + /* Change over to the starting substate machine to continue */ + sci_base_state_machine_start(&sci_phy->starting_substate_machine); + + if (sci_phy->state_machine.previous_state_id + == SCI_BASE_PHY_STATE_READY) { + scic_sds_controller_link_down( + scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy + ); + } +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state + * handlers for the phy object base state machine ready state. - The SCU + * hardware protocol engine is resumed. - The struct scic_sds_controller is informed + * that the phy object has gone link up. none + */ +static void scic_sds_phy_ready_state_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY); + + scic_sds_controller_link_up( + scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on exiting + * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware + * protocol engine represented by this struct scic_sds_phy object. none + */ +static void scic_sds_phy_ready_state_exit(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_suspend(sci_phy); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state + * handlers for the phy object base state machine resetting state. none + */ +static void scic_sds_phy_resetting_state_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING); + + /* + * The phy is being reset, therefore deactivate it from the port. + * In the resetting state we don't notify the user regarding + * link up and link down notifications. */ + scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false); + + if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + scu_link_layer_tx_hard_reset(sci_phy); + } else { + /* + * The SCU does not need to have a discrete reset state so + * just go back to the starting state. + */ + sci_base_state_machine_change_state( + &sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + } +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state + * handlers for the phy object base state machine final state. none + */ +static void scic_sds_phy_final_state_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL); + + /* Nothing to do here */ +} + +/* --------------------------------------------------------------------------- */ + +static const struct sci_base_state scic_sds_phy_state_table[] = { + [SCI_BASE_PHY_STATE_INITIAL] = { + .enter_state = scic_sds_phy_initial_state_enter, + }, + [SCI_BASE_PHY_STATE_STOPPED] = { + .enter_state = scic_sds_phy_stopped_state_enter, + }, + [SCI_BASE_PHY_STATE_STARTING] = { + .enter_state = scic_sds_phy_starting_state_enter, + }, + [SCI_BASE_PHY_STATE_READY] = { + .enter_state = scic_sds_phy_ready_state_enter, + .exit_state = scic_sds_phy_ready_state_exit, + }, + [SCI_BASE_PHY_STATE_RESETTING] = { + .enter_state = scic_sds_phy_resetting_state_enter, + }, + [SCI_BASE_PHY_STATE_FINAL] = { + .enter_state = scic_sds_phy_final_state_enter, + }, +}; + +void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, + struct scic_sds_port *owning_port, u8 phy_index) +{ + sci_base_state_machine_construct(&sci_phy->state_machine, + sci_phy, + scic_sds_phy_state_table, + SCI_BASE_PHY_STATE_INITIAL); + + sci_base_state_machine_start(&sci_phy->state_machine); + + /* Copy the rest of the input data to our locals */ + sci_phy->owning_port = owning_port; + sci_phy->phy_index = phy_index; + sci_phy->bcn_received_while_port_unassigned = false; + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + sci_phy->link_layer_registers = NULL; + sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; + sci_phy->sata_timeout_timer = NULL; + + /* Initialize the the substate machines */ + sci_base_state_machine_construct(&sci_phy->starting_substate_machine, + sci_phy, + scic_sds_phy_starting_substates, + SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); +} void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index) { diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 3a95adbb508c..093fd473366c 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -57,7 +57,105 @@ #include #include -#include "scic_sds_phy.h" +#include "state_machine.h" + +/* This is the timeout value for the SATA phy to wait for a SIGNATURE FIS + * before restarting the starting state machine. Technically, the old parallel + * ATA specification required up to 30 seconds for a device to issue its + * signature FIS as a result of a soft reset. Now we see that devices respond + * generally within 15 seconds, but we'll use 25 for now. + */ +#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT 25000 + +/* This is the timeout for the SATA OOB/SN because the hardware does not + * recognize a hot plug after OOB signal but before the SN signals. We need to + * make sure after a hotplug timeout if we have not received the speed event + * notification from the hardware that we restart the hardware OOB state + * machine. + */ +#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250 + +enum scic_sds_phy_protocol { + SCIC_SDS_PHY_PROTOCOL_UNKNOWN, + SCIC_SDS_PHY_PROTOCOL_SAS, + SCIC_SDS_PHY_PROTOCOL_SATA, + SCIC_SDS_MAX_PHY_PROTOCOLS +}; + +/** + * struct scic_sds_phy - This structure contains or references all of the data + * necessary to represent the core phy object and SCU harware protocol + * engine. + * + * + */ +struct scic_sds_phy { + /** + * This field contains the information for the base phy state machine. + */ + struct sci_base_state_machine state_machine; + + /** + * This field specifies the port object that owns/contains this phy. + */ + struct scic_sds_port *owning_port; + + /** + * This field indicates whether the phy supports 1.5 Gb/s, 3.0 Gb/s, + * or 6.0 Gb/s operation. + */ + enum sas_linkrate max_negotiated_speed; + + /** + * This member specifies the protocol being utilized on this phy. This + * field contains a legitamite value once the PHY has link trained with + * a remote phy. + */ + enum scic_sds_phy_protocol protocol; + + /** + * This field specifies the index with which this phy is associated (0-3). + */ + u8 phy_index; + + /** + * This member indicates if this particular PHY has received a BCN while + * it had no port assignement. This BCN will be reported once the phy is + * assigned to a port. + */ + bool bcn_received_while_port_unassigned; + + /** + * This field indicates if this PHY is currently in the process of + * link training (i.e. it has started OOB, but has yet to perform + * IAF exchange/Signature FIS reception). + */ + bool is_in_link_training; + + /** + * This field contains a reference to the timer utilized in detecting + * when a signature FIS timeout has occurred. The signature FIS is the + * first FIS sent by an attached SATA device after OOB/SN. + */ + void *sata_timeout_timer; + + const struct scic_sds_phy_state_handler *state_handlers; + + struct sci_base_state_machine starting_substate_machine; + + /** + * This field is the pointer to the transport layer register for the SCU + * hardware. + */ + struct scu_transport_layer_registers __iomem *transport_layer_registers; + + /** + * This field points to the link layer register set within the SCU. + */ + struct scu_link_layer_registers __iomem *link_layer_registers; + +}; + struct isci_phy { struct scic_sds_phy sci; @@ -85,6 +183,480 @@ static inline struct isci_phy *sci_phy_to_iphy(struct scic_sds_phy *sci_phy) return iphy; } +struct scic_phy_cap { + union { + struct { + /* + * The SAS specification indicates the start bit shall + * always be set to + * 1. This implementation will have the start bit set + * to 0 if the PHY CAPABILITIES were either not + * received or speed negotiation failed. + */ + u8 start:1; + u8 tx_ssc_type:1; + u8 res1:2; + u8 req_logical_linkrate:4; + + u32 gen1_no_ssc:1; + u32 gen1_ssc:1; + u32 gen2_no_ssc:1; + u32 gen2_ssc:1; + u32 gen3_no_ssc:1; + u32 gen3_ssc:1; + u32 res2:17; + u32 parity:1; + }; + u32 all; + }; +} __packed; + +/* this data structure reflects the link layer transmit identification reg */ +struct scic_phy_proto { + union { + struct { + u16 _r_a:1; + u16 smp_iport:1; + u16 stp_iport:1; + u16 ssp_iport:1; + u16 _r_b:4; + u16 _r_c:1; + u16 smp_tport:1; + u16 stp_tport:1; + u16 ssp_tport:1; + u16 _r_d:4; + }; + u16 all; + }; +} __packed; + + +/** + * struct scic_phy_properties - This structure defines the properties common to + * all phys that can be retrieved. + * + * + */ +struct scic_phy_properties { + /** + * This field specifies the port that currently contains the + * supplied phy. This field may be set to NULL + * if the phy is not currently contained in a port. + */ + struct scic_sds_port *owning_port; + + /** + * This field specifies the link rate at which the phy is + * currently operating. + */ + enum sas_linkrate negotiated_link_rate; + + /** + * This field specifies the index of the phy in relation to other + * phys within the controller. This index is zero relative. + */ + u8 index; +}; + +/** + * struct scic_sas_phy_properties - This structure defines the properties, + * specific to a SAS phy, that can be retrieved. + * + * + */ +struct scic_sas_phy_properties { + /** + * This field delineates the Identify Address Frame received + * from the remote end point. + */ + struct sas_identify_frame rcvd_iaf; + + /** + * This field delineates the Phy capabilities structure received + * from the remote end point. + */ + struct scic_phy_cap rcvd_cap; + +}; + +/** + * struct scic_sata_phy_properties - This structure defines the properties, + * specific to a SATA phy, that can be retrieved. + * + * + */ +struct scic_sata_phy_properties { + /** + * This field delineates the signature FIS received from the + * attached target. + */ + struct dev_to_host_fis signature_fis; + + /** + * This field specifies to the user if a port selector is connected + * on the specified phy. + */ + bool is_port_selector_present; + +}; + +/** + * enum scic_phy_counter_id - This enumeration depicts the various pieces of + * optional information that can be retrieved for a specific phy. + * + * + */ +enum scic_phy_counter_id { + /** + * This PHY information field tracks the number of frames received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME, + + /** + * This PHY information field tracks the number of frames transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_FRAME, + + /** + * This PHY information field tracks the number of DWORDs received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD, + + /** + * This PHY information field tracks the number of DWORDs transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD, + + /** + * This PHY information field tracks the number of times DWORD + * synchronization was lost. + */ + SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR, + + /** + * This PHY information field tracks the number of received DWORDs with + * running disparity errors. + */ + SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR, + + /** + * This PHY information field tracks the number of received frames with a + * CRC error (not including short or truncated frames). + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR, + + /** + * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) + * primitives received. + */ + SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT, + + /** + * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) + * primitives transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT, + + /** + * This PHY information field tracks the number of times the inactivity + * timer for connections on the phy has been utilized. + */ + SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED, + + /** + * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) + * primitives received. + */ + SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT, + + /** + * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) + * primitives transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT, + + /** + * This PHY information field tracks the number of CREDIT BLOCKED + * primitives received. + * @note Depending on remote device implementation, credit blocks + * may occur regularly. + */ + SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED, + + /** + * This PHY information field contains the number of short frames + * received. A short frame is simply a frame smaller then what is + * allowed by either the SAS or SATA specification. + */ + SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME, + + /** + * This PHY information field contains the number of frames received after + * credit has been exhausted. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT, + + /** + * This PHY information field contains the number of frames received after + * a DONE has been received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE, + + /** + * This PHY information field contains the number of times the phy + * failed to achieve DWORD synchronization during speed negotiation. + */ + SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR +}; + +enum scic_sds_phy_states { + /** + * Simply the initial state for the base domain state machine. + */ + SCI_BASE_PHY_STATE_INITIAL, + + /** + * This state indicates that the phy has successfully been stopped. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the INITIAL state. + * This state is entered from the STARTING state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_PHY_STATE_STOPPED, + + /** + * This state indicates that the phy is in the process of becomming + * ready. In this state no new IO operations are permitted on this phy. + * This state is entered from the STOPPED state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_PHY_STATE_STARTING, + + /** + * This state indicates the the phy is now ready. Thus, the user + * is able to perform IO operations utilizing this phy as long as it + * is currently part of a valid port. + * This state is entered from the STARTING state. + */ + SCI_BASE_PHY_STATE_READY, + + /** + * This state indicates that the phy is in the process of being reset. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the READY state. + */ + SCI_BASE_PHY_STATE_RESETTING, + + /** + * Simply the final state for the base phy state machine. + */ + SCI_BASE_PHY_STATE_FINAL, +}; + + +/** + * enum scic_sds_phy_starting_substates - + * + * + */ +enum scic_sds_phy_starting_substates { + /** + * Initial state + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL, + + /** + * Wait state for the hardware OSSP event type notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN, + + /** + * Wait state for the PHY speed notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN, + + /** + * Wait state for the IAF Unsolicited frame notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF, + + /** + * Wait state for the request to consume power + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER, + + /** + * Wait state for request to consume power + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER, + + /** + * Wait state for the SATA PHY notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN, + + /** + * Wait for the SATA PHY speed notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN, + + /** + * Wait state for the SIGNATURE FIS unsolicited frame notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF, + + /** + * Exit state for this state machine + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL, +}; + + + +typedef enum sci_status (*scic_sds_phy_handler_t)(struct scic_sds_phy *); +typedef enum sci_status (*scic_sds_phy_event_handler_t)(struct scic_sds_phy *, u32); +typedef enum sci_status (*scic_sds_phy_frame_handler_t)(struct scic_sds_phy *, u32); +typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); + +struct scic_sds_phy_state_handler { + /** + * The start_handler specifies the method invoked when there is an + * attempt to start a phy. + */ + scic_sds_phy_handler_t start_handler; + + /** + * The stop_handler specifies the method invoked when there is an + * attempt to stop a phy. + */ + scic_sds_phy_handler_t stop_handler; + + /** + * The reset_handler specifies the method invoked when there is an + * attempt to reset a phy. + */ + scic_sds_phy_handler_t reset_handler; + + /** + * The destruct_handler specifies the method invoked when attempting to + * destruct a phy. + */ + scic_sds_phy_handler_t destruct_handler; + + /** + * The state handler for unsolicited frames received from the SCU hardware. + */ + scic_sds_phy_frame_handler_t frame_handler; + + /** + * The state handler for events received from the SCU hardware. + */ + scic_sds_phy_event_handler_t event_handler; + + /** + * The state handler for staggered spinup. + */ + scic_sds_phy_power_handler_t consume_power_handler; + +}; + +/** + * scic_sds_phy_get_index() - + * + * This macro returns the phy index for the specified phy + */ +#define scic_sds_phy_get_index(phy) \ + ((phy)->phy_index) + +/** + * scic_sds_phy_get_controller() - This macro returns the controller for this + * phy + * + * + */ +#define scic_sds_phy_get_controller(phy) \ + (scic_sds_port_get_controller((phy)->owning_port)) + +/** + * scic_sds_phy_set_state_handlers() - This macro sets the state handlers for + * this phy object + * + * + */ +#define scic_sds_phy_set_state_handlers(phy, handlers) \ + ((phy)->state_handlers = (handlers)) + +/** + * scic_sds_phy_set_base_state_handlers() - + * + * This macro set the base state handlers for the phy object. + */ +#define scic_sds_phy_set_base_state_handlers(phy, state_id) \ + scic_sds_phy_set_state_handlers(\ + (phy), \ + &scic_sds_phy_state_handler_table[(state_id)] \ + ) + +void scic_sds_phy_construct( + struct scic_sds_phy *this_phy, + struct scic_sds_port *owning_port, + u8 phy_index); + +struct scic_sds_port *scic_sds_phy_get_port( + struct scic_sds_phy *this_phy); + +void scic_sds_phy_set_port( + struct scic_sds_phy *this_phy, + struct scic_sds_port *owning_port); + +enum sci_status scic_sds_phy_initialize( + struct scic_sds_phy *this_phy, + struct scu_transport_layer_registers __iomem *transport_layer_registers, + struct scu_link_layer_registers __iomem *link_layer_registers); + +enum sci_status scic_sds_phy_start( + struct scic_sds_phy *this_phy); + +enum sci_status scic_sds_phy_stop( + struct scic_sds_phy *this_phy); + +enum sci_status scic_sds_phy_reset( + struct scic_sds_phy *this_phy); + +void scic_sds_phy_resume( + struct scic_sds_phy *this_phy); + +void scic_sds_phy_setup_transport( + struct scic_sds_phy *this_phy, + u32 device_id); + +enum sci_status scic_sds_phy_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code); + +enum sci_status scic_sds_phy_frame_handler( + struct scic_sds_phy *this_phy, + u32 frame_index); + +enum sci_status scic_sds_phy_consume_power_handler( + struct scic_sds_phy *this_phy); + +void scic_sds_phy_get_sas_address( + struct scic_sds_phy *this_phy, + struct sci_sas_address *sas_address); + +void scic_sds_phy_get_attached_sas_address( + struct scic_sds_phy *this_phy, + struct sci_sas_address *sas_address); + +struct scic_phy_proto; +void scic_sds_phy_get_protocols( + struct scic_sds_phy *sci_phy, + struct scic_phy_proto *protocols); +enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy); + struct isci_host; void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index); int isci_phy_control(struct asd_sas_phy *phy, enum phy_func func, void *buf); diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index d4bf6d2d8c9b..321935d9560b 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -55,8 +55,6 @@ #include #include "isci.h" -#include "scic_phy.h" -#include "scic_sds_phy.h" #include "scic_port.h" #include "port.h" #include "request.h" diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 23390102514f..2baa215cb275 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -57,9 +57,7 @@ #include "port.h" #include "remote_device.h" #include "request.h" -#include "scic_phy.h" #include "scic_port.h" -#include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_node_context.h" #include "scu_event_codes.h" -- cgit v1.2.3