From c1542cbc50d19565006633827532ab9f96c92cea Mon Sep 17 00:00:00 2001 From: maximilian attems Date: Sat, 15 Oct 2005 10:43:35 +0100 Subject: [SERIAL] Add SupraExpress 56i support The modem is said to work with belows addition to pnp_dev_table[]: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=296011 Signed-off-by: maximilian attems Signed-off-by: Russell King --- drivers/serial/8250_pnp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index c2786fc41cc5..5d8660a42b77 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -276,6 +276,8 @@ static const struct pnp_device_id pnp_dev_table[] = { { "SUP1620", 0 }, /* SupraExpress 33.6 Data/Fax PnP modem */ { "SUP1760", 0 }, + /* SupraExpress 56i Sp Intl */ + { "SUP2171", 0 }, /* Phoebe Micro */ /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */ { "TEX0011", 0 }, -- cgit v1.2.3 From c086f282c01d7e5a887c3f7b190520538267f12e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 18 Oct 2005 07:51:34 +0100 Subject: [ARM] 3018/1: S3C2410 - check de-referenced device is really a platform device Patch from Ben Dooks Check that the device we are looking at is really a platform device before trying to cast it to one to find out the platform bus number. Thanks to RMK for pointing this out. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/clock.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index f59608268751..8b3d5dc35de5 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -98,7 +98,10 @@ struct clk *clk_get(struct device *dev, const char *id) struct clk *clk = ERR_PTR(-ENOENT); int idno; - idno = (dev == NULL) ? -1 : to_platform_device(dev)->id; + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; down(&clocks_sem); -- cgit v1.2.3 From 9b15c6c4e22cbb381373fac3bee8cacb811147a9 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 18 Oct 2005 07:51:34 +0100 Subject: [ARM] 3019/1: fix wrong comments Patch from Nicolas Pitre Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- include/asm-arm/locks.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-arm/locks.h b/include/asm-arm/locks.h index f08dc8447913..852220eecdbc 100644 --- a/include/asm-arm/locks.h +++ b/include/asm-arm/locks.h @@ -103,7 +103,7 @@ ({ \ smp_mb(); \ __asm__ __volatile__( \ - "@ up_op_read\n" \ + "@ up_op_write\n" \ "1: ldrex lr, [%0]\n" \ " adds lr, lr, %1\n" \ " strex ip, lr, [%0]\n" \ @@ -231,7 +231,7 @@ #define __up_op_write(ptr,wake) \ ({ \ __asm__ __volatile__( \ - "@ up_op_read\n" \ + "@ up_op_write\n" \ " mrs ip, cpsr\n" \ " orr lr, ip, #128\n" \ " msr cpsr_c, lr\n" \ -- cgit v1.2.3 From ad1b472bea1bbcd8dc7fd92f6952d8b2d8355edb Mon Sep 17 00:00:00 2001 From: Kenneth Tan Date: Tue, 18 Oct 2005 07:51:35 +0100 Subject: [ARM] 3020/1: Fixes typo error CONFIG_CPU_IXP465, which should be CONFIG_CPU_IXP46X Patch from Kenneth Tan The cpu_is_ixp465 macro in include/asm-arm/arch-ixp4xx/hardware.h is always returning 0 because #ifdef CONFIG_CPU_IXP465 is always false. Signed-off-by: Kenneth Tan Signed-off-by: Russell King --- include/asm-arm/arch-ixp4xx/hardware.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h index 4ac964b9078a..55d85eea8c1a 100644 --- a/include/asm-arm/arch-ixp4xx/hardware.h +++ b/include/asm-arm/arch-ixp4xx/hardware.h @@ -27,7 +27,7 @@ #define pcibios_assign_all_busses() 1 -#if defined(CONFIG_CPU_IXP465) && !defined(__ASSEMBLY__) +#if defined(CONFIG_CPU_IXP46X) && !defined(__ASSEMBLY__) extern unsigned int processor_id; #define cpu_is_ixp465() ((processor_id & 0xffffffc0) == 0x69054200) #else -- cgit v1.2.3 From 251b928cdff5f12e7da8f56e8933e2b58ba08456 Mon Sep 17 00:00:00 2001 From: Kenneth Tan Date: Tue, 18 Oct 2005 07:53:35 +0100 Subject: [ARM] 3021/1: Interrupt 0 bug fix for ixp4xx Patch from Kenneth Tan The get_irqnr_and_base subroutine of ixp4xx does not take interrupt 0 condition into account properly. We should not perform "subs" here. The Z flag will be set when interrupt 0 occur, which resulting "movne r1, sp" in the caller routine (irq_handler) not being executed. When interrupt 0 occur: o if CONFIG_CPU_IXP46X is not set, "subs" will set the Z flag and return o if CONFIG_CPU_IXP46X is set, codes in upper interrupt handling will be trigerred. But since this is not supper interrupt, the "cmp" in the upper interrupt handling portion will set the Z flag and return Signed-off-by: Kenneth Tan Signed-off-by: Russell King --- include/asm-arm/arch-ixp4xx/entry-macro.S | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S index 455da64832de..323b0bc4a39c 100644 --- a/include/asm-arm/arch-ixp4xx/entry-macro.S +++ b/include/asm-arm/arch-ixp4xx/entry-macro.S @@ -15,25 +15,26 @@ ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET) ldr \irqstat, [\irqstat] @ get interrupts cmp \irqstat, #0 - beq 1001f + beq 1001f @ upper IRQ? clz \irqnr, \irqstat mov \base, #31 - subs \irqnr, \base, \irqnr + sub \irqnr, \base, \irqnr + b 1002f @ lower IRQ being + @ handled 1001: /* * IXP465 has an upper IRQ status register */ #if defined(CONFIG_CPU_IXP46X) - bne 1002f ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET) ldr \irqstat, [\irqstat] @ get upper interrupts mov \irqnr, #63 clz \irqstat, \irqstat cmp \irqstat, #32 subne \irqnr, \irqnr, \irqstat -1002: #endif +1002: .endm -- cgit v1.2.3 From 1e65174a3378494608e8ed7f8c74d658be9a0fb2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 18 Oct 2005 08:26:15 -0700 Subject: Add some basic .gitignore files This still leaves driver and architecture-specific subdirectories alone, but gets rid of the bulk of the "generic" generated files that we should ignore. Signed-off-by: Linus Torvalds --- .gitignore | 30 ++++++++++++++++++++++++++++++ drivers/char/.gitignore | 3 +++ drivers/pci/.gitignore | 4 ++++ drivers/video/logo/.gitignore | 7 +++++++ lib/.gitignore | 6 ++++++ scripts/.gitignore | 4 ++++ scripts/basic/.gitignore | 3 +++ scripts/kconfig/.gitignore | 16 ++++++++++++++++ scripts/mod/.gitignore | 4 ++++ usr/.gitignore | 7 +++++++ 10 files changed, 84 insertions(+) create mode 100644 .gitignore create mode 100644 drivers/char/.gitignore create mode 100644 drivers/pci/.gitignore create mode 100644 drivers/video/logo/.gitignore create mode 100644 lib/.gitignore create mode 100644 scripts/.gitignore create mode 100644 scripts/basic/.gitignore create mode 100644 scripts/kconfig/.gitignore create mode 100644 scripts/mod/.gitignore create mode 100644 usr/.gitignore diff --git a/.gitignore b/.gitignore new file mode 100644 index 000000000000..5014bfa48ac1 --- /dev/null +++ b/.gitignore @@ -0,0 +1,30 @@ +# +# NOTE! Don't add files that are generated in specific +# subdirectories here. Add them in the ".gitignore" file +# in that subdirectory instead. +# +# Normal rules +# +.* +*.o +*.a +*.s +*.ko +*.mod.c + +# +# Top-level generic files +# +vmlinux* +System.map +Module.symvers + +# +# Generated include files +# +include/asm +include/config +include/linux/autoconf.h +include/linux/compile.h +include/linux/version.h + diff --git a/drivers/char/.gitignore b/drivers/char/.gitignore new file mode 100644 index 000000000000..2b6b1d772ed7 --- /dev/null +++ b/drivers/char/.gitignore @@ -0,0 +1,3 @@ +consolemap_deftbl.c +defkeymap.c + diff --git a/drivers/pci/.gitignore b/drivers/pci/.gitignore new file mode 100644 index 000000000000..f297ca8d313e --- /dev/null +++ b/drivers/pci/.gitignore @@ -0,0 +1,4 @@ +classlist.h +devlist.h +gen-devlist + diff --git a/drivers/video/logo/.gitignore b/drivers/video/logo/.gitignore new file mode 100644 index 000000000000..e48355f538fa --- /dev/null +++ b/drivers/video/logo/.gitignore @@ -0,0 +1,7 @@ +# +# Generated files +# +*_mono.c +*_vga16.c +*_clut224.c +*_gray256.c diff --git a/lib/.gitignore b/lib/.gitignore new file mode 100644 index 000000000000..3bef1ea94c99 --- /dev/null +++ b/lib/.gitignore @@ -0,0 +1,6 @@ +# +# Generated files +# +gen_crc32table +crc32table.h + diff --git a/scripts/.gitignore b/scripts/.gitignore new file mode 100644 index 000000000000..b46d68bb9e17 --- /dev/null +++ b/scripts/.gitignore @@ -0,0 +1,4 @@ +conmakehash +kallsyms +pnmtologo + diff --git a/scripts/basic/.gitignore b/scripts/basic/.gitignore new file mode 100644 index 000000000000..7304e19782c7 --- /dev/null +++ b/scripts/basic/.gitignore @@ -0,0 +1,3 @@ +fixdep +split-include +docproc diff --git a/scripts/kconfig/.gitignore b/scripts/kconfig/.gitignore new file mode 100644 index 000000000000..2dac3442e0ac --- /dev/null +++ b/scripts/kconfig/.gitignore @@ -0,0 +1,16 @@ +# +# Generated files +# +config* +lex.*.c +*.tab.c +*.tab.h + +# +# configuration programs +# +conf +mconf +qconf +gconf +kxgettext diff --git a/scripts/mod/.gitignore b/scripts/mod/.gitignore new file mode 100644 index 000000000000..e9b7abe7b95b --- /dev/null +++ b/scripts/mod/.gitignore @@ -0,0 +1,4 @@ +elfconfig.h +mk_elfconfig +modpost + diff --git a/usr/.gitignore b/usr/.gitignore new file mode 100644 index 000000000000..be186a82e8d0 --- /dev/null +++ b/usr/.gitignore @@ -0,0 +1,7 @@ +# +# Generated files +# +gen_init_cpio +initramfs_data.cpio +initramfs_data.cpio.gz +initramfs_list -- cgit v1.2.3 From bb7e257ef8d8ba43cab356aa1cc1b20d0106d45f Mon Sep 17 00:00:00 2001 From: Antonino A. Daplas Date: Tue, 18 Oct 2005 15:59:52 +0800 Subject: [PATCH] vesafb: Fix display corruption on display blank Reported by: Bob Tracy "...I've got a Toshiba notebook (730XCDT -- Pentium 150MMX) for which I'm using the Vesa FB driver. When the machine has been idle for some time and the driver attempts to powerdown the display, rather than the display going blank, it goes gray with several strange lines. When I hit the "shift" key or other-wise wake up the display, the old video state is not fully restored..." vesafb recently added a blank method which has only 2 states, powerup and powerdown. The powerdown state is used for all blanking levels, but in his case, powerdown does not work correctly for higher levels of display powersaving. Thus, for intermediate power levels, use software blanking, and use only hardware blanking for an explicit powerdown. Signed-off-by: Antonino Daplas Signed-off-by: Linus Torvalds --- drivers/video/vesafb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c index 1ca80264c7b0..b1243da55fc5 100644 --- a/drivers/video/vesafb.c +++ b/drivers/video/vesafb.c @@ -96,14 +96,14 @@ static int vesafb_blank(int blank, struct fb_info *info) int loop = 10000; u8 seq = 0, crtc17 = 0; - err = 0; - - if (blank) { + if (blank == FB_BLANK_POWERDOWN) { seq = 0x20; crtc17 = 0x00; + err = 0; } else { seq = 0x00; crtc17 = 0x80; + err = (blank == FB_BLANK_UNBLANK) ? 0 : -EINVAL; } vga_wseq(NULL, 0x00, 0x01); -- cgit v1.2.3 From d1972efaf24e56c06b43c40c364f9377763c2e13 Mon Sep 17 00:00:00 2001 From: Paul Schulz Date: Tue, 18 Oct 2005 19:40:32 +0100 Subject: [ARM] 3023/1: pxa-regs: Typo in ARM pxa register definitions. Patch from Paul Schulz The following trivial patch is to fix what looks like a typo in the PXA register definitions. The correction comes directly from the definition in the Intel Documentation. http://www.intel.com/design/pca/applicationsprocessors/manuals/278693.htm Intel(R) PXA 255 Processor - Developers Manual - Jan 2004 - Page 12-33 Neither 'UDCCS_IO_ROF' or 'UDCCS_IO_DME' are currently used elseware in the main code (from grep of tree)... The current definitions have been in the code since at lease 2.4.7. Signed-off-by: Paul Schulz Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa-regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 13fa2deb4ddd..3af7165ab0d7 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -653,7 +653,7 @@ #define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ #define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */ +#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ #define UDCCS_IO_DME (1 << 3) /* DMA enable */ #define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ #define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ -- cgit v1.2.3 From 3359b54c8c07338f3a863d1109b42eebccdcf379 Mon Sep 17 00:00:00 2001 From: Seth, Rohit Date: Tue, 18 Oct 2005 14:15:12 -0700 Subject: [PATCH] Handle spurious page fault for hugetlb region The hugetlb pages are currently pre-faulted. At the time of mmap of hugepages, we populate the new PTEs. It is possible that HW has already cached some of the unused PTEs internally. These stale entries never get a chance to be purged in existing control flow. This patch extends the check in page fault code for hugepages. Check if a faulted address falls with in size for the hugetlb file backing it. We return VM_FAULT_MINOR for these cases (assuming that the arch specific page-faulting code purges the stale entry for the archs that need it). Signed-off-by: Rohit Seth [ This is apparently arguably an ia64 port bug. But the code won't hurt, and for now it fixes a real problem on some ia64 machines ] Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 13 +++++++++++++ mm/memory.c | 14 ++++++++++++-- 2 files changed, 25 insertions(+), 2 deletions(-) diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index e670b0d13fe0..42cb7d70f9ac 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -155,11 +155,24 @@ static inline void set_file_hugepages(struct file *file) { file->f_op = &hugetlbfs_file_operations; } + +static inline int valid_hugetlb_file_off(struct vm_area_struct *vma, + unsigned long address) +{ + struct inode *inode = vma->vm_file->f_dentry->d_inode; + loff_t file_off = address - vma->vm_start; + + file_off += (vma->vm_pgoff << PAGE_SHIFT); + + return (file_off < inode->i_size); +} + #else /* !CONFIG_HUGETLBFS */ #define is_file_hugepages(file) 0 #define set_file_hugepages(file) BUG() #define hugetlb_zero_setup(size) ERR_PTR(-ENOSYS) +#define valid_hugetlb_file_off(vma, address) 0 #endif /* !CONFIG_HUGETLBFS */ diff --git a/mm/memory.c b/mm/memory.c index ae8161f1f459..8c88b973abc5 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2045,8 +2045,18 @@ int __handle_mm_fault(struct mm_struct *mm, struct vm_area_struct * vma, inc_page_state(pgfault); - if (is_vm_hugetlb_page(vma)) - return VM_FAULT_SIGBUS; /* mapping truncation does this. */ + if (unlikely(is_vm_hugetlb_page(vma))) { + if (valid_hugetlb_file_off(vma, address)) + /* We get here only if there was a stale(zero) TLB entry + * (because of HW prefetching). + * Low-level arch code (if needed) should have already + * purged the stale entry as part of this fault handling. + * Here we just return. + */ + return VM_FAULT_MINOR; + else + return VM_FAULT_SIGBUS; /* mapping truncation does this. */ + } /* * We need the page table lock to synchronize with kswapd -- cgit v1.2.3 From 67c5587ad4047041e4fb137628076388ede05281 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 19 Oct 2005 23:00:56 +0100 Subject: [ARM] 3024/1: Add cpu_v6_proc_fin Patch from Tony Lindgren Machine restart calls cpu_proc_fin() to clean and disable cache, and turn off interrupts. This patch adds proper cpu_v6_proc_fin. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mm/proc-v6.S | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index caf3b19b167f..9bb5fff406fb 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -55,7 +55,14 @@ ENTRY(cpu_v6_proc_init) mov pc, lr ENTRY(cpu_v6_proc_fin) - mov pc, lr + stmfd sp!, {lr} + cpsid if @ disable interrupts + bl v6_flush_kern_cache_all + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1000 @ ...i............ + bic r0, r0, #0x0006 @ .............ca. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldmfd sp!, {pc} /* * cpu_v6_reset(loc) -- cgit v1.2.3 From e03d13e985d48ac4885382c9e3b1510c78bd047f Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Wed, 19 Oct 2005 22:21:23 -0700 Subject: [PATCH] Fix cpu timers exit deadlock and races Oleg Nesterov reported an SMP deadlock. If there is a running timer tracking a different process's CPU time clock when the process owning the timer exits, we deadlock on tasklist_lock in posix_cpu_timer_del via exit_itimers. That code was using tasklist_lock to check for a race with __exit_signal being called on the timer-target task and clearing its ->signal. However, there is actually no such race. __exit_signal will have called posix_cpu_timers_exit and posix_cpu_timers_exit_group before it does that. Those will clear those k_itimer's association with the dying task, so posix_cpu_timer_del will return early and never reach the code in question. In addition, posix_cpu_timer_del called from exit_itimers during execve or directly from timer_delete in the process owning the timer can race with an exiting timer-target task to cause a double put on timer-target task struct. Make sure we always access cpu_timers lists with sighand lock held. Signed-off-by: Roland McGrath Signed-off-by: Chris Wright Signed-off-by: Linus Torvalds --- kernel/posix-cpu-timers.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-) diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 7a51a5597c33..b3f3edc475de 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -387,25 +387,19 @@ int posix_cpu_timer_del(struct k_itimer *timer) if (unlikely(p == NULL)) return 0; + spin_lock(&p->sighand->siglock); if (!list_empty(&timer->it.cpu.entry)) { - read_lock(&tasklist_lock); - if (unlikely(p->signal == NULL)) { - /* - * We raced with the reaping of the task. - * The deletion should have cleared us off the list. - */ - BUG_ON(!list_empty(&timer->it.cpu.entry)); - } else { - /* - * Take us off the task's timer list. - */ - spin_lock(&p->sighand->siglock); - list_del(&timer->it.cpu.entry); - spin_unlock(&p->sighand->siglock); - } - read_unlock(&tasklist_lock); + /* + * Take us off the task's timer list. We don't need to + * take tasklist_lock and check for the task being reaped. + * If it was reaped, it already called posix_cpu_timers_exit + * and posix_cpu_timers_exit_group to clear all the timers + * that pointed to it. + */ + list_del(&timer->it.cpu.entry); + put_task_struct(p); } - put_task_struct(p); + spin_unlock(&p->sighand->siglock); return 0; } -- cgit v1.2.3 From 1c59827d1da9bcd6970800d4f8a031b5859e8b4c Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 19 Oct 2005 21:23:43 -0700 Subject: [PATCH] mm: hugetlb truncation fixes hugetlbfs allows truncation of its files (should it?), but hugetlb.c often forgets that: crashes and misaccounting ensue. copy_hugetlb_page_range better grab the src page_table_lock since we don't want to guess what happens if concurrently truncated. unmap_hugepage_range rss accounting must not assume the full range was mapped. follow_hugetlb_page must guard with page_table_lock and be prepared to exit early. Restyle copy_hugetlb_page_range with a for loop like the others there. Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 901ac523a1c3..a1b30d45459e 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -274,21 +274,22 @@ int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, { pte_t *src_pte, *dst_pte, entry; struct page *ptepage; - unsigned long addr = vma->vm_start; - unsigned long end = vma->vm_end; + unsigned long addr; - while (addr < end) { + for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) { dst_pte = huge_pte_alloc(dst, addr); if (!dst_pte) goto nomem; + spin_lock(&src->page_table_lock); src_pte = huge_pte_offset(src, addr); - BUG_ON(!src_pte || pte_none(*src_pte)); /* prefaulted */ - entry = *src_pte; - ptepage = pte_page(entry); - get_page(ptepage); - add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE); - set_huge_pte_at(dst, addr, dst_pte, entry); - addr += HPAGE_SIZE; + if (src_pte && !pte_none(*src_pte)) { + entry = *src_pte; + ptepage = pte_page(entry); + get_page(ptepage); + add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE); + set_huge_pte_at(dst, addr, dst_pte, entry); + } + spin_unlock(&src->page_table_lock); } return 0; @@ -323,8 +324,8 @@ void unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start, page = pte_page(pte); put_page(page); + add_mm_counter(mm, rss, - (HPAGE_SIZE / PAGE_SIZE)); } - add_mm_counter(mm, rss, -((end - start) >> PAGE_SHIFT)); flush_tlb_range(vma, start, end); } @@ -403,6 +404,7 @@ int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, BUG_ON(!is_vm_hugetlb_page(vma)); vpfn = vaddr/PAGE_SIZE; + spin_lock(&mm->page_table_lock); while (vaddr < vma->vm_end && remainder) { if (pages) { @@ -415,8 +417,13 @@ int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, * indexing below to work. */ pte = huge_pte_offset(mm, vaddr & HPAGE_MASK); - /* hugetlb should be locked, and hence, prefaulted */ - WARN_ON(!pte || pte_none(*pte)); + /* the hugetlb file might have been truncated */ + if (!pte || pte_none(*pte)) { + remainder = 0; + if (!i) + i = -EFAULT; + break; + } page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)]; @@ -434,7 +441,7 @@ int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, --remainder; ++i; } - + spin_unlock(&mm->page_table_lock); *length = remainder; *position = vaddr; -- cgit v1.2.3 From c367c21c93ccdaf7e1e124891633d89f9ae77f54 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 19 Oct 2005 21:23:44 -0700 Subject: [PATCH] orinoco: limit message rate Brice Goglin reports a printk storm from this driver. Fix. Acked-by: David Gibson Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/wireless/orinoco.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index cf3daaa1b369..15ceaf615756 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -578,8 +578,9 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) txfid, NULL); if (err) { netif_start_queue(dev); - printk(KERN_ERR "%s: Error %d transmitting packet\n", - dev->name, err); + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d transmitting packet\n", + dev->name, err); stats->tx_errors++; goto fail; } -- cgit v1.2.3 From 4a9949d7ac9e2bc51939f27b184be6e1bd99004e Mon Sep 17 00:00:00 2001 From: Andy Wingo Date: Wed, 19 Oct 2005 21:23:46 -0700 Subject: [PATCH] raw1394: fix locking in the presence of SMP and interrupts Changes all spinlocks that can be held during an irq handler to disable interrupts while the lock is held. Changes spin_[un]lock_irq to use the irqsave/irqrestore variants for robustness and readability. In raw1394.c:handle_iso_listen(), don't grab host_info_lock at all -- we're not accessing host_info_list or host_count, and holding this lock while trying to tasklet_kill the iso tasklet this can cause an ABBA deadlock if ohci:dma_rcv_tasklet is running and tries to grab host_info_lock in raw1394.c:receive_iso. Test program attached reliably deadlocks all SMP machines I have been able to test without this patch. Signed-off-by: Andy Wingo Acked-by: Ben Collins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ieee1394/ohci1394.c | 6 +-- drivers/ieee1394/raw1394.c | 100 ++++++++++++++++++++++++-------------------- 2 files changed, 57 insertions(+), 49 deletions(-) diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index 6a6acbd80af4..4cf9b8f3e336 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -2283,8 +2283,9 @@ static void ohci_schedule_iso_tasklets(struct ti_ohci *ohci, { struct ohci1394_iso_tasklet *t; unsigned long mask; + unsigned long flags; - spin_lock(&ohci->iso_tasklet_list_lock); + spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags); list_for_each_entry(t, &ohci->iso_tasklet_list, link) { mask = 1 << t->context; @@ -2295,8 +2296,7 @@ static void ohci_schedule_iso_tasklets(struct ti_ohci *ohci, tasklet_schedule(&t->tasklet); } - spin_unlock(&ohci->iso_tasklet_list_lock); - + spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags); } static irqreturn_t ohci_irq_handler(int irq, void *dev_id, diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c index 315f5ca8bedb..0470f77a9cd1 100644 --- a/drivers/ieee1394/raw1394.c +++ b/drivers/ieee1394/raw1394.c @@ -412,6 +412,7 @@ static void fcp_request(struct hpsb_host *host, int nodeid, int direction, static ssize_t raw1394_read(struct file *file, char __user * buffer, size_t count, loff_t * offset_is_ignored) { + unsigned long flags; struct file_info *fi = (struct file_info *)file->private_data; struct list_head *lh; struct pending_request *req; @@ -435,10 +436,10 @@ static ssize_t raw1394_read(struct file *file, char __user * buffer, } } - spin_lock_irq(&fi->reqlists_lock); + spin_lock_irqsave(&fi->reqlists_lock, flags); lh = fi->req_complete.next; list_del(lh); - spin_unlock_irq(&fi->reqlists_lock); + spin_unlock_irqrestore(&fi->reqlists_lock, flags); req = list_entry(lh, struct pending_request, list); @@ -486,6 +487,7 @@ static int state_opened(struct file_info *fi, struct pending_request *req) static int state_initialized(struct file_info *fi, struct pending_request *req) { + unsigned long flags; struct host_info *hi; struct raw1394_khost_list *khl; @@ -499,7 +501,7 @@ static int state_initialized(struct file_info *fi, struct pending_request *req) switch (req->req.type) { case RAW1394_REQ_LIST_CARDS: - spin_lock_irq(&host_info_lock); + spin_lock_irqsave(&host_info_lock, flags); khl = kmalloc(sizeof(struct raw1394_khost_list) * host_count, SLAB_ATOMIC); @@ -513,7 +515,7 @@ static int state_initialized(struct file_info *fi, struct pending_request *req) khl++; } } - spin_unlock_irq(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, flags); if (khl != NULL) { req->req.error = RAW1394_ERROR_NONE; @@ -528,7 +530,7 @@ static int state_initialized(struct file_info *fi, struct pending_request *req) break; case RAW1394_REQ_SET_CARD: - spin_lock_irq(&host_info_lock); + spin_lock_irqsave(&host_info_lock, flags); if (req->req.misc < host_count) { list_for_each_entry(hi, &host_info_list, list) { if (!req->req.misc--) @@ -550,7 +552,7 @@ static int state_initialized(struct file_info *fi, struct pending_request *req) } else { req->req.error = RAW1394_ERROR_INVALID_ARG; } - spin_unlock_irq(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, flags); req->req.length = 0; break; @@ -569,7 +571,6 @@ static void handle_iso_listen(struct file_info *fi, struct pending_request *req) { int channel = req->req.misc; - spin_lock_irq(&host_info_lock); if ((channel > 63) || (channel < -64)) { req->req.error = RAW1394_ERROR_INVALID_ARG; } else if (channel >= 0) { @@ -601,7 +602,6 @@ static void handle_iso_listen(struct file_info *fi, struct pending_request *req) req->req.length = 0; queue_complete_req(req); - spin_unlock_irq(&host_info_lock); } static void handle_fcp_listen(struct file_info *fi, struct pending_request *req) @@ -627,6 +627,7 @@ static void handle_fcp_listen(struct file_info *fi, struct pending_request *req) static int handle_async_request(struct file_info *fi, struct pending_request *req, int node) { + unsigned long flags; struct hpsb_packet *packet = NULL; u64 addr = req->req.address & 0xffffffffffffULL; @@ -761,9 +762,9 @@ static int handle_async_request(struct file_info *fi, hpsb_set_packet_complete_task(packet, (void (*)(void *))queue_complete_cb, req); - spin_lock_irq(&fi->reqlists_lock); + spin_lock_irqsave(&fi->reqlists_lock, flags); list_add_tail(&req->list, &fi->req_pending); - spin_unlock_irq(&fi->reqlists_lock); + spin_unlock_irqrestore(&fi->reqlists_lock, flags); packet->generation = req->req.generation; @@ -779,6 +780,7 @@ static int handle_async_request(struct file_info *fi, static int handle_iso_send(struct file_info *fi, struct pending_request *req, int channel) { + unsigned long flags; struct hpsb_packet *packet; packet = hpsb_make_isopacket(fi->host, req->req.length, channel & 0x3f, @@ -804,9 +806,9 @@ static int handle_iso_send(struct file_info *fi, struct pending_request *req, (void (*)(void *))queue_complete_req, req); - spin_lock_irq(&fi->reqlists_lock); + spin_lock_irqsave(&fi->reqlists_lock, flags); list_add_tail(&req->list, &fi->req_pending); - spin_unlock_irq(&fi->reqlists_lock); + spin_unlock_irqrestore(&fi->reqlists_lock, flags); /* Update the generation of the packet just before sending. */ packet->generation = req->req.generation; @@ -821,6 +823,7 @@ static int handle_iso_send(struct file_info *fi, struct pending_request *req, static int handle_async_send(struct file_info *fi, struct pending_request *req) { + unsigned long flags; struct hpsb_packet *packet; int header_length = req->req.misc & 0xffff; int expect_response = req->req.misc >> 16; @@ -867,9 +870,9 @@ static int handle_async_send(struct file_info *fi, struct pending_request *req) hpsb_set_packet_complete_task(packet, (void (*)(void *))queue_complete_cb, req); - spin_lock_irq(&fi->reqlists_lock); + spin_lock_irqsave(&fi->reqlists_lock, flags); list_add_tail(&req->list, &fi->req_pending); - spin_unlock_irq(&fi->reqlists_lock); + spin_unlock_irqrestore(&fi->reqlists_lock, flags); /* Update the generation of the packet just before sending. */ packet->generation = req->req.generation; @@ -885,6 +888,7 @@ static int handle_async_send(struct file_info *fi, struct pending_request *req) static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer, u64 addr, size_t length, u16 flags) { + unsigned long irqflags; struct pending_request *req; struct host_info *hi; struct file_info *fi = NULL; @@ -899,7 +903,7 @@ static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer, "addr: %4.4x %8.8x length: %Zu", nodeid, (u16) ((addr >> 32) & 0xFFFF), (u32) (addr & 0xFFFFFFFF), length); - spin_lock(&host_info_lock); + spin_lock_irqsave(&host_info_lock, irqflags); hi = find_host_info(host); /* search address-entry */ if (hi != NULL) { list_for_each_entry(fi, &hi->file_info_list, list) { @@ -924,7 +928,7 @@ static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer, if (!found) { printk(KERN_ERR "raw1394: arm_read FAILED addr_entry not found" " -> rcode_address_error\n"); - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (RCODE_ADDRESS_ERROR); } else { DBGMSG("arm_read addr_entry FOUND"); @@ -954,7 +958,7 @@ static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer, req = __alloc_pending_request(SLAB_ATOMIC); if (!req) { DBGMSG("arm_read -> rcode_conflict_error"); - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (RCODE_CONFLICT_ERROR); /* A resource conflict was detected. The request may be retried */ } @@ -974,7 +978,7 @@ static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer, if (!(req->data)) { free_pending_request(req); DBGMSG("arm_read -> rcode_conflict_error"); - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (RCODE_CONFLICT_ERROR); /* A resource conflict was detected. The request may be retried */ } @@ -1031,13 +1035,14 @@ static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer, sizeof(struct arm_request)); queue_complete_req(req); } - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (rcode); } static int arm_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t * data, u64 addr, size_t length, u16 flags) { + unsigned long irqflags; struct pending_request *req; struct host_info *hi; struct file_info *fi = NULL; @@ -1052,7 +1057,7 @@ static int arm_write(struct hpsb_host *host, int nodeid, int destid, "addr: %4.4x %8.8x length: %Zu", nodeid, (u16) ((addr >> 32) & 0xFFFF), (u32) (addr & 0xFFFFFFFF), length); - spin_lock(&host_info_lock); + spin_lock_irqsave(&host_info_lock, irqflags); hi = find_host_info(host); /* search address-entry */ if (hi != NULL) { list_for_each_entry(fi, &hi->file_info_list, list) { @@ -1077,7 +1082,7 @@ static int arm_write(struct hpsb_host *host, int nodeid, int destid, if (!found) { printk(KERN_ERR "raw1394: arm_write FAILED addr_entry not found" " -> rcode_address_error\n"); - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (RCODE_ADDRESS_ERROR); } else { DBGMSG("arm_write addr_entry FOUND"); @@ -1106,7 +1111,7 @@ static int arm_write(struct hpsb_host *host, int nodeid, int destid, req = __alloc_pending_request(SLAB_ATOMIC); if (!req) { DBGMSG("arm_write -> rcode_conflict_error"); - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (RCODE_CONFLICT_ERROR); /* A resource conflict was detected. The request my be retried */ } @@ -1118,7 +1123,7 @@ static int arm_write(struct hpsb_host *host, int nodeid, int destid, if (!(req->data)) { free_pending_request(req); DBGMSG("arm_write -> rcode_conflict_error"); - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (RCODE_CONFLICT_ERROR); /* A resource conflict was detected. The request may be retried */ } @@ -1165,7 +1170,7 @@ static int arm_write(struct hpsb_host *host, int nodeid, int destid, sizeof(struct arm_request)); queue_complete_req(req); } - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (rcode); } @@ -1173,6 +1178,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store, u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode, u16 flags) { + unsigned long irqflags; struct pending_request *req; struct host_info *hi; struct file_info *fi = NULL; @@ -1198,7 +1204,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store, (u32) (addr & 0xFFFFFFFF), ext_tcode & 0xFF, be32_to_cpu(data), be32_to_cpu(arg)); } - spin_lock(&host_info_lock); + spin_lock_irqsave(&host_info_lock, irqflags); hi = find_host_info(host); /* search address-entry */ if (hi != NULL) { list_for_each_entry(fi, &hi->file_info_list, list) { @@ -1224,7 +1230,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store, if (!found) { printk(KERN_ERR "raw1394: arm_lock FAILED addr_entry not found" " -> rcode_address_error\n"); - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (RCODE_ADDRESS_ERROR); } else { DBGMSG("arm_lock addr_entry FOUND"); @@ -1307,7 +1313,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store, req = __alloc_pending_request(SLAB_ATOMIC); if (!req) { DBGMSG("arm_lock -> rcode_conflict_error"); - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (RCODE_CONFLICT_ERROR); /* A resource conflict was detected. The request may be retried */ } @@ -1316,7 +1322,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store, if (!(req->data)) { free_pending_request(req); DBGMSG("arm_lock -> rcode_conflict_error"); - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (RCODE_CONFLICT_ERROR); /* A resource conflict was detected. The request may be retried */ } @@ -1382,7 +1388,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store, sizeof(struct arm_response) + 2 * sizeof(*store)); queue_complete_req(req); } - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (rcode); } @@ -1390,6 +1396,7 @@ static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store, u64 addr, octlet_t data, octlet_t arg, int ext_tcode, u16 flags) { + unsigned long irqflags; struct pending_request *req; struct host_info *hi; struct file_info *fi = NULL; @@ -1422,7 +1429,7 @@ static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store, (u32) ((be64_to_cpu(arg) >> 32) & 0xFFFFFFFF), (u32) (be64_to_cpu(arg) & 0xFFFFFFFF)); } - spin_lock(&host_info_lock); + spin_lock_irqsave(&host_info_lock, irqflags); hi = find_host_info(host); /* search addressentry in file_info's for host */ if (hi != NULL) { list_for_each_entry(fi, &hi->file_info_list, list) { @@ -1449,7 +1456,7 @@ static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store, printk(KERN_ERR "raw1394: arm_lock64 FAILED addr_entry not found" " -> rcode_address_error\n"); - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (RCODE_ADDRESS_ERROR); } else { DBGMSG("arm_lock64 addr_entry FOUND"); @@ -1533,7 +1540,7 @@ static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store, DBGMSG("arm_lock64 -> entering notification-section"); req = __alloc_pending_request(SLAB_ATOMIC); if (!req) { - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); DBGMSG("arm_lock64 -> rcode_conflict_error"); return (RCODE_CONFLICT_ERROR); /* A resource conflict was detected. The request may be retried */ @@ -1542,7 +1549,7 @@ static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store, req->data = kmalloc(size, SLAB_ATOMIC); if (!(req->data)) { free_pending_request(req); - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); DBGMSG("arm_lock64 -> rcode_conflict_error"); return (RCODE_CONFLICT_ERROR); /* A resource conflict was detected. The request may be retried */ @@ -1609,7 +1616,7 @@ static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store, sizeof(struct arm_response) + 2 * sizeof(*store)); queue_complete_req(req); } - spin_unlock(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, irqflags); return (rcode); } @@ -1980,6 +1987,7 @@ static int write_phypacket(struct file_info *fi, struct pending_request *req) struct hpsb_packet *packet = NULL; int retval = 0; quadlet_t data; + unsigned long flags; data = be32_to_cpu((u32) req->req.sendb); DBGMSG("write_phypacket called - quadlet 0x%8.8x ", data); @@ -1990,9 +1998,9 @@ static int write_phypacket(struct file_info *fi, struct pending_request *req) req->packet = packet; hpsb_set_packet_complete_task(packet, (void (*)(void *))queue_complete_cb, req); - spin_lock_irq(&fi->reqlists_lock); + spin_lock_irqsave(&fi->reqlists_lock, flags); list_add_tail(&req->list, &fi->req_pending); - spin_unlock_irq(&fi->reqlists_lock); + spin_unlock_irqrestore(&fi->reqlists_lock, flags); packet->generation = req->req.generation; retval = hpsb_send_packet(packet); DBGMSG("write_phypacket send_packet called => retval: %d ", retval); @@ -2659,14 +2667,15 @@ static unsigned int raw1394_poll(struct file *file, poll_table * pt) { struct file_info *fi = file->private_data; unsigned int mask = POLLOUT | POLLWRNORM; + unsigned long flags; poll_wait(file, &fi->poll_wait_complete, pt); - spin_lock_irq(&fi->reqlists_lock); + spin_lock_irqsave(&fi->reqlists_lock, flags); if (!list_empty(&fi->req_complete)) { mask |= POLLIN | POLLRDNORM; } - spin_unlock_irq(&fi->reqlists_lock); + spin_unlock_irqrestore(&fi->reqlists_lock, flags); return mask; } @@ -2710,6 +2719,7 @@ static int raw1394_release(struct inode *inode, struct file *file) struct arm_addr *arm_addr = NULL; int another_host; int csr_mod = 0; + unsigned long flags; if (fi->iso_state != RAW1394_ISO_INACTIVE) raw1394_iso_shutdown(fi); @@ -2720,13 +2730,11 @@ static int raw1394_release(struct inode *inode, struct file *file) } } - spin_lock_irq(&host_info_lock); + spin_lock_irqsave(&host_info_lock, flags); fi->listen_channels = 0; - spin_unlock_irq(&host_info_lock); fail = 0; /* set address-entries invalid */ - spin_lock_irq(&host_info_lock); while (!list_empty(&fi->addr_list)) { another_host = 0; @@ -2777,14 +2785,14 @@ static int raw1394_release(struct inode *inode, struct file *file) vfree(addr->addr_space_buffer); kfree(addr); } /* while */ - spin_unlock_irq(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, flags); if (fail > 0) { printk(KERN_ERR "raw1394: during addr_list-release " "error(s) occurred \n"); } while (!done) { - spin_lock_irq(&fi->reqlists_lock); + spin_lock_irqsave(&fi->reqlists_lock, flags); while (!list_empty(&fi->req_complete)) { lh = fi->req_complete.next; @@ -2798,7 +2806,7 @@ static int raw1394_release(struct inode *inode, struct file *file) if (list_empty(&fi->req_pending)) done = 1; - spin_unlock_irq(&fi->reqlists_lock); + spin_unlock_irqrestore(&fi->reqlists_lock, flags); if (!done) down_interruptible(&fi->complete_sem); @@ -2828,9 +2836,9 @@ static int raw1394_release(struct inode *inode, struct file *file) fi->host->id); if (fi->state == connected) { - spin_lock_irq(&host_info_lock); + spin_lock_irqsave(&host_info_lock, flags); list_del(&fi->list); - spin_unlock_irq(&host_info_lock); + spin_unlock_irqrestore(&host_info_lock, flags); put_device(&fi->host->device); } -- cgit v1.2.3 From 6985c43f39b3d799999c390099c56ebbee27d4f4 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 19 Oct 2005 21:23:47 -0700 Subject: [PATCH] Three one-liners in md.c The main problem fixes is that in certain situations stopping md arrays may take longer than you expect, or may require multiple attempts. This would only happen when resync/recovery is happening. This patch fixes three vaguely related bugs. 1/ The recent change to use kthreads got the setting of the process name wrong. This fixes it. 2/ The recent change to use kthreads lost the ability for md threads to be signalled with SIG_KILL. This restores that. 3/ There is a long standing bug in that if: - An array needs recovery (onto a hot-spare) and - The recovery is being blocked because some other array being recovered shares a physical device and - The recovery thread is killed with SIG_KILL Then the recovery will appear to have completed with no IO being done, which can cause data corruption. This patch makes sure that incomplete recovery will be treated as incomplete. Note that any kernel affected by bug 2 will not suffer the problem of bug 3, as the signal can never be delivered. Thus the current 2.6.14-rc kernels are not susceptible to data corruption. Note also that if arrays are shutdown (with "mdadm -S" or "raidstop") then the problem doesn't occur. It only happens if a SIGKILL is independently delivered as done by 'init' when shutting down. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 2897df90df44..e9476075aa13 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3063,6 +3063,7 @@ static int md_thread(void * arg) * many dirty RAID5 blocks. */ + allow_signal(SIGKILL); complete(thread->event); while (!kthread_should_stop()) { void (*run)(mddev_t *); @@ -3111,7 +3112,7 @@ mdk_thread_t *md_register_thread(void (*run) (mddev_t *), mddev_t *mddev, thread->mddev = mddev; thread->name = name; thread->timeout = MAX_SCHEDULE_TIMEOUT; - thread->tsk = kthread_run(md_thread, thread, mdname(thread->mddev)); + thread->tsk = kthread_run(md_thread, thread, name, mdname(thread->mddev)); if (IS_ERR(thread->tsk)) { kfree(thread); return NULL; @@ -3569,6 +3570,7 @@ static void md_do_sync(mddev_t *mddev) try_again: if (signal_pending(current)) { flush_signals(current); + set_bit(MD_RECOVERY_INTR, &mddev->recovery); goto skip; } ITERATE_MDDEV(mddev2,tmp) { -- cgit v1.2.3 From 83bcbf8dad86c217ef70b4b4d53811422bb79dfa Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 19 Oct 2005 21:23:49 -0700 Subject: [PATCH] ppc64: Fix error in vDSO 32 bits date The implementation of __kernel_gettimeofday() in the 32 bits vDSO has a small bug (a typo actually) that will cause it to lose 1 bit of precision. Not terribly bad but worth fixing. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/vdso32/gettimeofday.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ppc64/kernel/vdso32/gettimeofday.S b/arch/ppc64/kernel/vdso32/gettimeofday.S index 07f1c1c650c8..e243c1d24af7 100644 --- a/arch/ppc64/kernel/vdso32/gettimeofday.S +++ b/arch/ppc64/kernel/vdso32/gettimeofday.S @@ -109,7 +109,7 @@ __do_get_xsec: lwz r6,(CFG_TB_TO_XS+4)(r9) mulhwu r4,r7,r5 mulhwu r6,r7,r6 - mullw r6,r7,r5 + mullw r0,r7,r5 addc r6,r6,r0 /* At this point, we have the scaled xsec value in r4 + XER:CA -- cgit v1.2.3 From f9b25fabfddf142b5af8268692701d386cf37e4f Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Wed, 19 Oct 2005 21:23:49 -0700 Subject: [PATCH] Export RCS_TAR_IGNORE for rpm targets The variable RCS_TAR_IGNORE is used in scripts/packaging/Makefile, but not exported from the main Makefile, so it's never used. This results in the rpm targets being very unhappy in quilted trees. Signed-off-by: Tom Rini Acked-by: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index be33d758c0fe..91de6be9c919 100644 --- a/Makefile +++ b/Makefile @@ -372,7 +372,7 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve # Files to ignore in find ... statements RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o -RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg +export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg # =========================================================================== # Rules shared between *config targets and build targets -- cgit v1.2.3 From d1209d049bbc3df66650f8417637be4f7b57b604 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 19 Oct 2005 21:23:51 -0700 Subject: [PATCH] Threads shouldn't inherit PF_NOFREEZE The PF_NOFREEZE process flag should not be inherited when a thread is forked. This patch (as585) removes the flag from the child. This problem is starting to show up more and more as drivers turn to the kthread API instead of using kernel_thread(). As a result, their kernel threads are now children of the kthread worker instead of modprobe, and they inherit the PF_NOFREEZE flag. This can cause problems during system suspend; the kernel threads are not getting frozen as they ought to be. Signed-off-by: Alan Stern Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/fork.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/fork.c b/kernel/fork.c index 533ce27f4b2c..280bd44ac441 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -848,7 +848,7 @@ static inline void copy_flags(unsigned long clone_flags, struct task_struct *p) { unsigned long new_flags = p->flags; - new_flags &= ~PF_SUPERPRIV; + new_flags &= ~(PF_SUPERPRIV | PF_NOFREEZE); new_flags |= PF_FORKNOEXEC; if (!(clone_flags & CLONE_PTRACE)) p->ptrace = 0; -- cgit v1.2.3 From 11909d64389c24b409e20f0eeafdc262e0a55788 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 19 Oct 2005 21:23:51 -0700 Subject: [PATCH] fix MGA DRM regression before 2.6.14 I've gotten a report on lkml, of a possible regression in the MGA DRM in 2.6.14-rc4 (since -rc1), I haven't been able to reproduce it here, but I've figured out some possible issues in the mga code that were definitely wrong, some of these are from DRM CVS, the main fix is the agp enable bit on the old code path still used by everyone..... Signed-off-by: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/drm/mga_dma.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/char/drm/mga_dma.c b/drivers/char/drm/mga_dma.c index fc7d4a594bca..c8e1b6c83636 100644 --- a/drivers/char/drm/mga_dma.c +++ b/drivers/char/drm/mga_dma.c @@ -437,7 +437,7 @@ static int mga_do_agp_dma_bootstrap(drm_device_t * dev, drm_mga_dma_bootstrap_t * dma_bs) { drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private; - const unsigned int warp_size = mga_warp_microcode_size(dev_priv); + unsigned int warp_size = mga_warp_microcode_size(dev_priv); int err; unsigned offset; const unsigned secondary_size = dma_bs->secondary_bin_count @@ -499,6 +499,12 @@ static int mga_do_agp_dma_bootstrap(drm_device_t * dev, return err; } + /* Make drm_addbufs happy by not trying to create a mapping for less + * than a page. + */ + if (warp_size < PAGE_SIZE) + warp_size = PAGE_SIZE; + offset = 0; err = drm_addmap( dev, offset, warp_size, _DRM_AGP, _DRM_READ_ONLY, & dev_priv->warp ); @@ -587,7 +593,7 @@ static int mga_do_pci_dma_bootstrap(drm_device_t * dev, drm_mga_dma_bootstrap_t * dma_bs) { drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private; - const unsigned int warp_size = mga_warp_microcode_size(dev_priv); + unsigned int warp_size = mga_warp_microcode_size(dev_priv); unsigned int primary_size; unsigned int bin_count; int err; @@ -599,6 +605,12 @@ static int mga_do_pci_dma_bootstrap(drm_device_t * dev, return DRM_ERR(EFAULT); } + /* Make drm_addbufs happy by not trying to create a mapping for less + * than a page. + */ + if (warp_size < PAGE_SIZE) + warp_size = PAGE_SIZE; + /* The proper alignment is 0x100 for this mapping */ err = drm_addmap(dev, 0, warp_size, _DRM_CONSISTENT, _DRM_READ_ONLY, &dev_priv->warp); @@ -812,6 +824,10 @@ static int mga_do_init_dma( drm_device_t *dev, drm_mga_init_t *init ) } if (! dev_priv->used_new_dma_init) { + + dev_priv->dma_access = MGA_PAGPXFER; + dev_priv->wagp_enable = MGA_WAGP_ENABLE; + dev_priv->status = drm_core_findmap(dev, init->status_offset); if (!dev_priv->status) { DRM_ERROR("failed to find status page!\n"); @@ -928,7 +944,7 @@ static int mga_do_cleanup_dma( drm_device_t *dev ) drm_mga_private_t *dev_priv = dev->dev_private; if ((dev_priv->warp != NULL) - && (dev_priv->mmio->type != _DRM_CONSISTENT)) + && (dev_priv->warp->type != _DRM_CONSISTENT)) drm_core_ioremapfree(dev_priv->warp, dev); if ((dev_priv->primary != NULL) -- cgit v1.2.3 From 51b190b304bbeb1090ba20b0623d39917fa62997 Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Wed, 19 Oct 2005 22:45:14 -0700 Subject: [PATCH] `unaligned access' in acpi get_root_bridge_busnr() In drivers/acpi/glue.c the address of an integer is cast to the address of an unsigned long. This breaks on systems where a long is larger than an int --- for a start the int can be misaligned; for a second the assignment through the pointer will overwrite part of the next variable. Signed-off-by: Peter Chubb Acked-by: "Brown, Len" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/glue.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index e36c5da2b31a..3937adf4e5e5 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -96,7 +96,7 @@ struct acpi_find_pci_root { static acpi_status do_root_bridge_busnr_callback(struct acpi_resource *resource, void *data) { - int *busnr = (int *)data; + unsigned long *busnr = (unsigned long *)data; struct acpi_resource_address64 address; if (resource->id != ACPI_RSTYPE_ADDRESS16 && @@ -115,13 +115,13 @@ do_root_bridge_busnr_callback(struct acpi_resource *resource, void *data) static int get_root_bridge_busnr(acpi_handle handle) { acpi_status status; - int bus, bbn; + unsigned long bus, bbn; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); status = acpi_evaluate_integer(handle, METHOD_NAME__BBN, NULL, - (unsigned long *)&bbn); + &bbn); if (status == AE_NOT_FOUND) { /* Assume bus = 0 */ printk(KERN_INFO PREFIX @@ -153,7 +153,7 @@ static int get_root_bridge_busnr(acpi_handle handle) } exit: acpi_os_free(buffer.pointer); - return bbn; + return (int)bbn; } static acpi_status -- cgit v1.2.3 From 281dd25cdc0d6903929b79183816d151ea626341 Mon Sep 17 00:00:00 2001 From: Yasunori Goto Date: Wed, 19 Oct 2005 15:52:18 -0700 Subject: [PATCH] swiotlb: make sure initial DMA allocations really are in DMA memory This introduces a limit parameter to the core bootmem allocator; The new parameter indicates that physical memory allocated by the bootmem allocator should be within the requested limit. We also introduce alloc_bootmem_low_pages_limit, alloc_bootmem_node_limit, alloc_bootmem_low_pages_node_limit apis, but alloc_bootmem_low_pages_limit is the only api used for swiotlb. The existing alloc_bootmem_low_pages() api could instead have been changed and made to pass right limit to the core allocator. But that would make the patch more intrusive for 2.6.14, as other arches use alloc_bootmem_low_pages(). We may be done that post 2.6.14 as a cleanup. With this, swiotlb gets memory within 4G for both x86_64 and ia64 arches. Signed-off-by: Yasunori Goto Cc: Ravikiran G Thirumalai Signed-off-by: Linus Torvalds --- arch/ia64/lib/swiotlb.c | 4 ++-- include/linux/bootmem.h | 32 ++++++++++++++++++++++++++++++-- mm/bootmem.c | 31 +++++++++++++++++++++---------- 3 files changed, 53 insertions(+), 14 deletions(-) diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c index dbc0b3e449c5..a604efc7f6c9 100644 --- a/arch/ia64/lib/swiotlb.c +++ b/arch/ia64/lib/swiotlb.c @@ -123,8 +123,8 @@ swiotlb_init_with_default_size (size_t default_size) /* * Get IO TLB memory from the low pages */ - io_tlb_start = alloc_bootmem_low_pages(io_tlb_nslabs * - (1 << IO_TLB_SHIFT)); + io_tlb_start = alloc_bootmem_low_pages_limit(io_tlb_nslabs * + (1 << IO_TLB_SHIFT), 0x100000000); if (!io_tlb_start) panic("Cannot allocate SWIOTLB buffer"); io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT); diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h index 82bd8842d11c..3b03b0b868dd 100644 --- a/include/linux/bootmem.h +++ b/include/linux/bootmem.h @@ -43,7 +43,7 @@ typedef struct bootmem_data { extern unsigned long __init bootmem_bootmap_pages (unsigned long); extern unsigned long __init init_bootmem (unsigned long addr, unsigned long memend); extern void __init free_bootmem (unsigned long addr, unsigned long size); -extern void * __init __alloc_bootmem (unsigned long size, unsigned long align, unsigned long goal); +extern void * __init __alloc_bootmem_limit (unsigned long size, unsigned long align, unsigned long goal, unsigned long limit); #ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE extern void __init reserve_bootmem (unsigned long addr, unsigned long size); #define alloc_bootmem(x) \ @@ -54,6 +54,16 @@ extern void __init reserve_bootmem (unsigned long addr, unsigned long size); __alloc_bootmem((x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_low_pages(x) \ __alloc_bootmem((x), PAGE_SIZE, 0) + +#define alloc_bootmem_limit(x, limit) \ + __alloc_bootmem_limit((x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS), (limit)) +#define alloc_bootmem_low_limit(x, limit) \ + __alloc_bootmem_limit((x), SMP_CACHE_BYTES, 0, (limit)) +#define alloc_bootmem_pages_limit(x, limit) \ + __alloc_bootmem_limit((x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS), (limit)) +#define alloc_bootmem_low_pages_limit(x, limit) \ + __alloc_bootmem_limit((x), PAGE_SIZE, 0, (limit)) + #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ extern unsigned long __init free_all_bootmem (void); @@ -61,7 +71,7 @@ extern unsigned long __init init_bootmem_node (pg_data_t *pgdat, unsigned long f extern void __init reserve_bootmem_node (pg_data_t *pgdat, unsigned long physaddr, unsigned long size); extern void __init free_bootmem_node (pg_data_t *pgdat, unsigned long addr, unsigned long size); extern unsigned long __init free_all_bootmem_node (pg_data_t *pgdat); -extern void * __init __alloc_bootmem_node (pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal); +extern void * __init __alloc_bootmem_node_limit (pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal, unsigned long limit); #ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE #define alloc_bootmem_node(pgdat, x) \ __alloc_bootmem_node((pgdat), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) @@ -69,6 +79,14 @@ extern void * __init __alloc_bootmem_node (pg_data_t *pgdat, unsigned long size, __alloc_bootmem_node((pgdat), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_low_pages_node(pgdat, x) \ __alloc_bootmem_node((pgdat), (x), PAGE_SIZE, 0) + +#define alloc_bootmem_node_limit(pgdat, x, limit) \ + __alloc_bootmem_node_limit((pgdat), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS), (limit)) +#define alloc_bootmem_pages_node_limit(pgdat, x, limit) \ + __alloc_bootmem_node_limit((pgdat), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS), (limit)) +#define alloc_bootmem_low_pages_node_limit(pgdat, x, limit) \ + __alloc_bootmem_node_limit((pgdat), (x), PAGE_SIZE, 0, (limit)) + #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ #ifdef CONFIG_HAVE_ARCH_ALLOC_REMAP @@ -105,5 +123,15 @@ extern void *__init alloc_large_system_hash(const char *tablename, #endif extern int __initdata hashdist; /* Distribute hashes across NUMA nodes? */ +static inline void *__alloc_bootmem (unsigned long size, unsigned long align, unsigned long goal) +{ + return __alloc_bootmem_limit(size, align, goal, 0); +} + +static inline void *__alloc_bootmem_node (pg_data_t *pgdat, unsigned long size, unsigned long align, + unsigned long goal) +{ + return __alloc_bootmem_node_limit(pgdat, size, align, goal, 0); +} #endif /* _LINUX_BOOTMEM_H */ diff --git a/mm/bootmem.c b/mm/bootmem.c index c1330cc19783..a58699b6579e 100644 --- a/mm/bootmem.c +++ b/mm/bootmem.c @@ -154,10 +154,10 @@ static void __init free_bootmem_core(bootmem_data_t *bdata, unsigned long addr, */ static void * __init __alloc_bootmem_core(struct bootmem_data *bdata, unsigned long size, - unsigned long align, unsigned long goal) + unsigned long align, unsigned long goal, unsigned long limit) { unsigned long offset, remaining_size, areasize, preferred; - unsigned long i, start = 0, incr, eidx; + unsigned long i, start = 0, incr, eidx, end_pfn = bdata->node_low_pfn; void *ret; if(!size) { @@ -166,7 +166,14 @@ __alloc_bootmem_core(struct bootmem_data *bdata, unsigned long size, } BUG_ON(align & (align-1)); - eidx = bdata->node_low_pfn - (bdata->node_boot_start >> PAGE_SHIFT); + if (limit && bdata->node_boot_start >= limit) + return NULL; + + limit >>=PAGE_SHIFT; + if (limit && end_pfn > limit) + end_pfn = limit; + + eidx = end_pfn - (bdata->node_boot_start >> PAGE_SHIFT); offset = 0; if (align && (bdata->node_boot_start & (align - 1UL)) != 0) @@ -178,11 +185,12 @@ __alloc_bootmem_core(struct bootmem_data *bdata, unsigned long size, * first, then we try to allocate lower pages. */ if (goal && (goal >= bdata->node_boot_start) && - ((goal >> PAGE_SHIFT) < bdata->node_low_pfn)) { + ((goal >> PAGE_SHIFT) < end_pfn)) { preferred = goal - bdata->node_boot_start; if (bdata->last_success >= preferred) - preferred = bdata->last_success; + if (!limit || (limit && limit > bdata->last_success)) + preferred = bdata->last_success; } else preferred = 0; @@ -382,14 +390,15 @@ unsigned long __init free_all_bootmem (void) return(free_all_bootmem_core(NODE_DATA(0))); } -void * __init __alloc_bootmem (unsigned long size, unsigned long align, unsigned long goal) +void * __init __alloc_bootmem_limit (unsigned long size, unsigned long align, unsigned long goal, + unsigned long limit) { pg_data_t *pgdat = pgdat_list; void *ptr; for_each_pgdat(pgdat) if ((ptr = __alloc_bootmem_core(pgdat->bdata, size, - align, goal))) + align, goal, limit))) return(ptr); /* @@ -400,14 +409,16 @@ void * __init __alloc_bootmem (unsigned long size, unsigned long align, unsigned return NULL; } -void * __init __alloc_bootmem_node (pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal) + +void * __init __alloc_bootmem_node_limit (pg_data_t *pgdat, unsigned long size, unsigned long align, + unsigned long goal, unsigned long limit) { void *ptr; - ptr = __alloc_bootmem_core(pgdat->bdata, size, align, goal); + ptr = __alloc_bootmem_core(pgdat->bdata, size, align, goal, limit); if (ptr) return (ptr); - return __alloc_bootmem(size, align, goal); + return __alloc_bootmem_limit(size, align, goal, limit); } -- cgit v1.2.3 From bf3f81b3f755fe3fced2aaac5cb3ecb4b541f41c Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 20 Oct 2005 08:34:56 +1000 Subject: [PATCH] ppc64: update defconfigs Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/configs/bpa_defconfig | 79 ++++++++++++++++------ arch/ppc64/configs/g5_defconfig | 124 +++++++++++++++++++++-------------- arch/ppc64/configs/iSeries_defconfig | 78 ++++++++++++++++------ arch/ppc64/configs/maple_defconfig | 67 ++++++++++++------- arch/ppc64/configs/pSeries_defconfig | 95 ++++++++++++++++++++------- arch/ppc64/defconfig | 100 ++++++++++++++++++++-------- 6 files changed, 380 insertions(+), 163 deletions(-) diff --git a/arch/ppc64/configs/bpa_defconfig b/arch/ppc64/configs/bpa_defconfig index 46c5da41c3ae..67ffecbc05cb 100644 --- a/arch/ppc64/configs/bpa_defconfig +++ b/arch/ppc64/configs/bpa_defconfig @@ -1,17 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Mon Aug 8 14:12:19 2005 +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:29:10 2005 # CONFIG_64BIT=y CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -36,6 +37,7 @@ CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -95,6 +97,7 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_NUMA is not set CONFIG_SCHED_SMT=y CONFIG_PREEMPT_NONE=y @@ -110,17 +113,18 @@ CONFIG_PPC_RTAS=y CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=y CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set CONFIG_ISA_DMA_API=y # -# General setup +# Bus Options # CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -132,8 +136,6 @@ CONFIG_PCI_NAMES=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set # # Networking @@ -163,8 +165,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set CONFIG_INET_TUNNEL=y -CONFIG_IP_TCPDIAG=y -CONFIG_IP_TCPDIAG_IPV6=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y @@ -181,6 +183,7 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set # # IP: Netfilter Configuration @@ -188,11 +191,14 @@ CONFIG_NETFILTER=y CONFIG_IP_NF_CONNTRACK=y # CONFIG_IP_NF_CT_ACCT is not set # CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set CONFIG_IP_NF_CT_PROTO_SCTP=y CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m @@ -216,13 +222,16 @@ CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_REALM=m CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -240,6 +249,7 @@ CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m @@ -251,6 +261,12 @@ CONFIG_IP_NF_ARP_MANGLE=m # # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) @@ -278,6 +294,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -291,6 +308,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -322,7 +344,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -395,6 +416,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -435,6 +457,11 @@ CONFIG_NETDEVICES=y # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -442,6 +469,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -462,15 +490,18 @@ CONFIG_E1000=m # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set CONFIG_SKGE=m # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_SPIDER_NET is not set # CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -552,6 +583,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINK is not set @@ -642,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -656,7 +687,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set # # Miscellaneous I2C Chip support @@ -683,11 +713,16 @@ CONFIG_I2C_ALGOBIT=y # Hardware Monitoring support # # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -756,10 +791,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -768,6 +799,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -794,13 +826,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -# CONFIG_TMPFS_SECURITY is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -846,6 +876,7 @@ CONFIG_SUNRPC=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -923,6 +954,7 @@ CONFIG_NLS_ISO8859_15=m CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=15 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -981,7 +1013,12 @@ CONFIG_CRYPTO_DEFLATE=m # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig index fc83d9330282..6323065fbf2c 100644 --- a/arch/ppc64/configs/g5_defconfig +++ b/arch/ppc64/configs/g5_defconfig @@ -1,17 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Mon Aug 8 14:16:59 2005 +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:30:23 2005 # CONFIG_64BIT=y CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -37,6 +38,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -97,6 +99,7 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_NUMA is not set # CONFIG_SCHED_SMT is not set CONFIG_PREEMPT_NONE=y @@ -109,19 +112,20 @@ CONFIG_HZ_250=y CONFIG_HZ=250 CONFIG_GENERIC_HARDIRQS=y CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_HOTPLUG_CPU is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set CONFIG_ISA_DMA_API=y # -# General setup +# Bus Options # CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set -# CONFIG_HOTPLUG_CPU is not set # # PCCARD (PCMCIA/CardBus) support @@ -132,8 +136,6 @@ CONFIG_PCI_NAMES=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set # # Networking @@ -163,8 +165,8 @@ CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_TUNNEL=y -CONFIG_IP_TCPDIAG=m -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y @@ -175,6 +177,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set # # IP: Netfilter Configuration @@ -182,11 +185,14 @@ CONFIG_NETFILTER=y CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_CT_ACCT=y CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y CONFIG_IP_NF_CT_PROTO_SCTP=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m @@ -210,14 +216,18 @@ CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_REALM=m CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -235,6 +245,7 @@ CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m @@ -243,6 +254,11 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + # # SCTP Configuration (EXPERIMENTAL) # @@ -270,6 +286,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -283,6 +300,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -315,7 +337,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -395,6 +416,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -422,6 +444,7 @@ CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -435,10 +458,12 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_QSTOR is not set @@ -498,6 +523,7 @@ CONFIG_DM_ZERO=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -540,7 +566,6 @@ CONFIG_IEEE1394_RAWIO=y # CONFIG_ADB_PMU=y CONFIG_PMAC_SMU=y -# CONFIG_PMAC_BACKLIGHT is not set CONFIG_THERM_PM72=y # @@ -557,6 +582,11 @@ CONFIG_TUN=m # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -564,6 +594,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set CONFIG_SUNGEM=y +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -585,6 +616,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=m @@ -594,6 +626,7 @@ CONFIG_TIGON3=m # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -760,8 +793,8 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y +CONFIG_I2C_PMAC_SMU=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -775,7 +808,6 @@ CONFIG_I2C_KEYWEST=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set # # Miscellaneous I2C Chip support @@ -802,11 +834,16 @@ CONFIG_I2C_KEYWEST=y # Hardware Monitoring support # # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -856,6 +893,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set @@ -937,6 +975,7 @@ CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -956,9 +995,11 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -983,30 +1024,14 @@ CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m - -# -# USB Host-to-Host Cables -# -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_GENESYS=y -CONFIG_USB_NET1080=y -CONFIG_USB_PL2301=y -CONFIG_USB_KC2190=y - -# -# Intelligent USB Devices/Gadgets -# -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_ZAURUS=y -CONFIG_USB_CDCETHER=y - -# -# USB Network Adapters -# -CONFIG_USB_AX8817X=y +# CONFIG_USB_NET_AX8817X is not set +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_ZAURUS is not set CONFIG_USB_MON=y # @@ -1124,16 +1149,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1141,6 +1162,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1168,14 +1190,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -# CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1225,6 +1244,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1303,6 +1323,7 @@ CONFIG_OPROFILE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1360,7 +1381,12 @@ CONFIG_CRYPTO_TEST=m # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig index 013d4e0e4003..62e92c7e9e27 100644 --- a/arch/ppc64/configs/iSeries_defconfig +++ b/arch/ppc64/configs/iSeries_defconfig @@ -1,17 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Mon Aug 8 14:17:02 2005 +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:30:56 2005 # CONFIG_64BIT=y CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -38,6 +39,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -88,6 +90,7 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_NUMA is not set # CONFIG_SCHED_SMT is not set CONFIG_PREEMPT_NONE=y @@ -101,17 +104,16 @@ CONFIG_HZ=250 CONFIG_GENERIC_HARDIRQS=y CONFIG_LPARCFG=y CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set CONFIG_ISA_DMA_API=y # -# General setup +# Bus Options # CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -152,8 +154,8 @@ CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_TUNNEL=y -CONFIG_IP_TCPDIAG=m -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y @@ -164,6 +166,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set # # IP: Netfilter Configuration @@ -171,11 +174,14 @@ CONFIG_NETFILTER=y CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_CT_ACCT=y CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y CONFIG_IP_NF_CT_PROTO_SCTP=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m @@ -199,14 +205,18 @@ CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_REALM=m CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -224,6 +234,7 @@ CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m @@ -232,6 +243,11 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + # # SCTP Configuration (EXPERIMENTAL) # @@ -259,6 +275,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -272,6 +289,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -303,7 +325,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -323,6 +344,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -350,6 +372,7 @@ CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -363,6 +386,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set @@ -415,6 +439,7 @@ CONFIG_DM_ZERO=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -444,6 +469,11 @@ CONFIG_TUN=m # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -451,6 +481,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -489,6 +520,7 @@ CONFIG_E1000=m # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -498,6 +530,7 @@ CONFIG_E1000=m # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -632,7 +665,6 @@ CONFIG_MAX_RAW_DEVS=256 # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -643,11 +675,16 @@ CONFIG_MAX_RAW_DEVS=256 # Hardware Monitoring support # # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -722,16 +759,12 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -739,6 +772,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -766,14 +800,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -824,6 +855,7 @@ CONFIG_CIFS_POSIX=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -897,6 +929,7 @@ CONFIG_OPROFILE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -954,7 +987,12 @@ CONFIG_CRYPTO_TEST=m # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig index dd42892cd873..7b480f3d1406 100644 --- a/arch/ppc64/configs/maple_defconfig +++ b/arch/ppc64/configs/maple_defconfig @@ -1,17 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Mon Aug 8 14:17:04 2005 +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:31:24 2005 # CONFIG_64BIT=y CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -37,6 +38,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y @@ -97,6 +99,7 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_NUMA is not set # CONFIG_SCHED_SMT is not set CONFIG_PREEMPT_NONE=y @@ -109,17 +112,18 @@ CONFIG_HZ_250=y CONFIG_HZ=250 CONFIG_GENERIC_HARDIRQS=y CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set CONFIG_ISA_DMA_API=y # -# General setup +# Bus Options # CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -131,8 +135,6 @@ CONFIG_PCI_NAMES=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set # # Networking @@ -163,13 +165,18 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + # # SCTP Configuration (EXPERIMENTAL) # @@ -196,6 +203,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -209,6 +217,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -240,7 +253,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -313,6 +325,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -353,6 +366,11 @@ CONFIG_NETDEVICES=y # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -360,6 +378,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -398,6 +417,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -408,6 +428,7 @@ CONFIG_E1000=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -553,7 +574,6 @@ CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -567,7 +587,6 @@ CONFIG_I2C_AMD8111=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set # # Miscellaneous I2C Chip support @@ -594,11 +613,16 @@ CONFIG_I2C_AMD8111=y # Hardware Monitoring support # # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -681,9 +705,11 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -814,10 +840,6 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -826,6 +848,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -849,14 +872,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -# CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -898,6 +918,7 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -975,6 +996,7 @@ CONFIG_NLS_UTF8=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SPINLOCK is not set @@ -1034,6 +1056,7 @@ CONFIG_CRYPTO_DES=y # Library routines # CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig index 29f7b80b0efc..9f09dff9e11a 100644 --- a/arch/ppc64/configs/pSeries_defconfig +++ b/arch/ppc64/configs/pSeries_defconfig @@ -1,17 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Mon Aug 8 14:17:07 2005 +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:32:17 2005 # CONFIG_64BIT=y CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -38,6 +39,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y @@ -104,6 +106,7 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_NUMA=y @@ -124,19 +127,20 @@ CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_HOTPLUG_CPU=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set CONFIG_ISA_DMA_API=y # -# General setup +# Bus Options # CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set -CONFIG_HOTPLUG_CPU=y # # PCCARD (PCMCIA/CardBus) support @@ -152,8 +156,6 @@ CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_SHPC is not set CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set # # Networking @@ -183,8 +185,8 @@ CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_TUNNEL=y -CONFIG_IP_TCPDIAG=m -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y @@ -195,6 +197,9 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m # # IP: Netfilter Configuration @@ -202,11 +207,15 @@ CONFIG_NETFILTER=y CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_CT_ACCT=y CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CONNTRACK_NETLINK=m CONFIG_IP_NF_CT_PROTO_SCTP=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m @@ -230,14 +239,18 @@ CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_REALM=m CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -255,6 +268,7 @@ CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m @@ -263,6 +277,11 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + # # SCTP Configuration (EXPERIMENTAL) # @@ -290,6 +309,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -303,6 +323,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -342,7 +367,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -416,6 +440,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -443,6 +468,7 @@ CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -456,6 +482,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set @@ -517,6 +544,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -546,6 +574,11 @@ CONFIG_TUN=m # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -553,6 +586,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=y # CONFIG_TYPHOON is not set @@ -581,6 +615,7 @@ CONFIG_E100=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -594,6 +629,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -604,6 +640,7 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set CONFIG_S2IO=m @@ -789,7 +826,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -804,7 +840,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set # # Miscellaneous I2C Chip support @@ -831,11 +866,16 @@ CONFIG_I2C_ALGOBIT=y # Hardware Monitoring support # # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -885,6 +925,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set @@ -982,9 +1023,11 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -1057,7 +1100,8 @@ CONFIG_USB_MON=y # InfiniBand support # CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_VERBS=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m @@ -1095,16 +1139,12 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1112,6 +1152,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1139,14 +1180,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1197,6 +1235,7 @@ CONFIG_CIFS_POSIX=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1261,6 +1300,7 @@ CONFIG_OPROFILE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1320,7 +1360,12 @@ CONFIG_CRYPTO_TEST=m # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig index 7cb4750bb7a9..37c157c93cef 100644 --- a/arch/ppc64/defconfig +++ b/arch/ppc64/defconfig @@ -1,17 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Mon Aug 8 14:16:54 2005 +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:28:33 2005 # CONFIG_64BIT=y CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -37,6 +38,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -106,6 +108,7 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_NUMA is not set @@ -126,19 +129,20 @@ CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m +CONFIG_HOTPLUG_CPU=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set CONFIG_ISA_DMA_API=y # -# General setup +# Bus Options # CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m # CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set # CONFIG_PCI_DEBUG is not set -CONFIG_HOTPLUG_CPU=y # # PCCARD (PCMCIA/CardBus) support @@ -154,8 +158,6 @@ CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_SHPC is not set CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set # # Networking @@ -185,8 +187,8 @@ CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_TUNNEL=y -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y @@ -197,6 +199,9 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m # # IP: Netfilter Configuration @@ -204,11 +209,15 @@ CONFIG_NETFILTER=y CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_CT_ACCT=y CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CONNTRACK_NETLINK=m CONFIG_IP_NF_CT_PROTO_SCTP=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m @@ -232,14 +241,18 @@ CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_REALM=m CONFIG_IP_NF_MATCH_SCTP=m +CONFIG_IP_NF_MATCH_DCCP=m CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -257,6 +270,7 @@ CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m @@ -265,6 +279,11 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + # # SCTP Configuration (EXPERIMENTAL) # @@ -292,6 +311,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -305,6 +325,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -344,7 +369,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -422,6 +446,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -449,6 +474,7 @@ CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -462,10 +488,12 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_QSTOR is not set @@ -535,6 +563,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -578,7 +607,6 @@ CONFIG_IEEE1394_AMDTP=m # CONFIG_ADB_PMU=y CONFIG_PMAC_SMU=y -# CONFIG_PMAC_BACKLIGHT is not set CONFIG_THERM_PM72=y # @@ -595,6 +623,11 @@ CONFIG_TUN=m # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -602,6 +635,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set CONFIG_SUNGEM=y +# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=y # CONFIG_TYPHOON is not set @@ -630,6 +664,7 @@ CONFIG_E100=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -643,16 +678,19 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set +# CONFIG_SPIDER_NET is not set # CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set # CONFIG_S2IO is not set @@ -838,8 +876,8 @@ CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y +CONFIG_I2C_PMAC_SMU=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -854,7 +892,6 @@ CONFIG_I2C_KEYWEST=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set # # Miscellaneous I2C Chip support @@ -881,11 +918,16 @@ CONFIG_I2C_KEYWEST=y # Hardware Monitoring support # # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -939,6 +981,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set @@ -1020,6 +1063,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -1036,9 +1080,11 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -1111,7 +1157,8 @@ CONFIG_USB_PEGASUS=y # InfiniBand support # CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_VERBS=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m @@ -1149,16 +1196,12 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1166,6 +1209,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1192,14 +1236,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1250,6 +1291,7 @@ CONFIG_CIFS_POSIX=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1328,6 +1370,7 @@ CONFIG_OPROFILE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1387,7 +1430,12 @@ CONFIG_CRYPTO_TEST=m # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m -- cgit v1.2.3 From 461a0ffbec1bcea896bd5daf1a98a18232a1e9c7 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 19 Oct 2005 08:22:13 -0400 Subject: [PATCH] scsi_error thread exits in TASK_INTERRUPTIBLE state. Found in the -rt patch set. The scsi_error thread likely will be in the TASK_INTERRUPTIBLE state upon exit. This patch fixes this bug. Signed-off-by: Steven Rostedt Signed-off-by: Linus Torvalds --- drivers/scsi/scsi_error.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index ad5342165079..52b348c36d56 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1645,6 +1645,8 @@ int scsi_error_handler(void *data) set_current_state(TASK_INTERRUPTIBLE); } + __set_current_state(TASK_RUNNING); + SCSI_LOG_ERROR_RECOVERY(1, printk("Error handler scsi_eh_%d" " exiting\n",shost->host_no)); -- cgit v1.2.3 From 450da6ca97185830315d21c06e46e232618e0fa6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 18 Oct 2005 22:45:17 +0100 Subject: [PATCH] build fix for uml/amd64 Missing half of the [PATCH] uml: Fix sysrq-r support for skas mode We need to remove these (UPT_[DEFG]S) from the read side as well as the write one - otherwise it simply won't build. Signed-off-by: Al Viro Acked-by: Paolo 'Blaisorblade' Giarrusso Acked-by: Jeff Dike Signed-off-by: Linus Torvalds --- arch/um/include/sysdep-x86_64/ptrace.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h index 8f0656766c21..8d353f0feec1 100644 --- a/arch/um/include/sysdep-x86_64/ptrace.h +++ b/arch/um/include/sysdep-x86_64/ptrace.h @@ -183,10 +183,6 @@ struct syscall_args { case RBP: val = UPT_RBP(regs); break; \ case ORIG_RAX: val = UPT_ORIG_RAX(regs); break; \ case CS: val = UPT_CS(regs); break; \ - case DS: val = UPT_DS(regs); break; \ - case ES: val = UPT_ES(regs); break; \ - case FS: val = UPT_FS(regs); break; \ - case GS: val = UPT_GS(regs); break; \ case EFLAGS: val = UPT_EFLAGS(regs); break; \ default : \ panic("Bad register in UPT_REG : %d\n", reg); \ -- cgit v1.2.3 From 93918e9afc76717176e9e114e79cdbb602a45ae8 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Oct 2005 23:23:05 -0700 Subject: Linux v2.6.14-rc5 The -rc4 release was supposed to be the last -rc, but here goes. The RCU fixes and the swiotlb changes need an -rc for final testing. --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 91de6be9c919..4a7000e353b5 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 14 -EXTRAVERSION =-rc4 +EXTRAVERSION =-rc5 NAME=Affluent Albatross # *DOCUMENTATION* -- cgit v1.2.3 From 7e6c1208598004a80b1c1fca4953eb9f2a6aa8bc Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Thu, 20 Oct 2005 08:39:43 -0400 Subject: [PATCH] libata: Marvell endian fix Jeff found an endian bug in the Marvell driver (thanks!). Here's the fix for it. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index d457f5673476..9b6213928f7a 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.24" +#define DRV_VERSION "0.25" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -800,7 +800,8 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len); } if (0 < qc->n_elem) { - pp->sg_tbl[qc->n_elem - 1].flags_size |= EPRD_FLAG_END_OF_TBL; + pp->sg_tbl[qc->n_elem - 1].flags_size |= + cpu_to_le32(EPRD_FLAG_END_OF_TBL); } } -- cgit v1.2.3 From 9ee0c0a2ccd66b90eaeb2f197c0a7da43071af52 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] iomem annotations (sata_nv) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 9fa2535dd937..8866530bc491 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -331,7 +331,7 @@ static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg) return 0xffffffffU; if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) - return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); else return inl(ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -345,7 +345,7 @@ static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) return; if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) - writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); else outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); } -- cgit v1.2.3 From 1e4f2a96aeb373000ccd783e0f5b40294b5e668a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] iomem annotations (ahci) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 5ec866b00479..cfa22e4ee547 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -407,7 +407,7 @@ static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) return 0xffffffffU; } - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -425,7 +425,7 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, return; } - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void ahci_phy_reset(struct ata_port *ap) @@ -453,14 +453,14 @@ static void ahci_phy_reset(struct ata_port *ap) static u8 ahci_check_status(struct ata_port *ap) { - void *mmio = (void *) ap->ioaddr.cmd_addr; + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; return readl(mmio + PORT_TFDATA) & 0xFF; } static u8 ahci_check_err(struct ata_port *ap) { - void *mmio = (void *) ap->ioaddr.cmd_addr; + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF; } -- cgit v1.2.3 From b181d3b0121e141cb410ea3126b4dbe4f8e1751a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] iomem annotations (sata_promise) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_promise.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index def7e0d9dacb..9bf8cbd29901 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -324,7 +324,7 @@ static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) return 0xffffffffU; - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -333,7 +333,7 @@ static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, { if (sc_reg > SCR_CONTROL) return; - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void pdc_qc_prep(struct ata_queued_cmd *qc) @@ -523,8 +523,8 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc) pp->pkt[2] = seq; wmb(); /* flush PRD, pkt writes */ - writel(pp->pkt_dma, (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ + writel(pp->pkt_dma, (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ } static int pdc_qc_issue_prot(struct ata_queued_cmd *qc) -- cgit v1.2.3 From 0420dd121d395e76f6b80fe232e7b4bc6a046f18 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] enum safety (sata_qstor) sata_qstor strays into a nasty area - gcc handling of wide enums is full of bugs that got fixed between gcc versions creating portability nightmare. Single-member enums are safe, so are ones that stay within the range of int or unsigned int. Anything beyond that is asking for trouble. Declaration of constants split in two enums, taking the ~0UL one into a separate enum. Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_qstor.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index ffcdeb68641c..e1c1dae27c52 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -51,8 +51,6 @@ enum { QS_PRD_BYTES = QS_MAX_PRD * 16, QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES, - QS_DMA_BOUNDARY = ~0UL, - /* global register offsets */ QS_HCF_CNFG3 = 0x0003, /* host configuration offset */ QS_HID_HPHY = 0x0004, /* host physical interface info */ @@ -101,6 +99,10 @@ enum { board_2068_idx = 0, /* QStor 4-port SATA/RAID */ }; +enum { + QS_DMA_BOUNDARY = ~0UL +}; + typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t; struct qs_port_priv { -- cgit v1.2.3 From a9afd7cd2f65ff85f5ffe931beb879ccf12540e0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] iomem annotations (sata_sx4) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sx4.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 540a85191172..d6d350a0b5e9 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -137,7 +137,7 @@ struct pdc_port_priv { }; struct pdc_host_priv { - void *dimm_mmio; + void __iomem *dimm_mmio; unsigned int doing_hdma; unsigned int hdma_prod; @@ -247,7 +247,7 @@ static void pdc20621_host_stop(struct ata_host_set *host_set) { struct pci_dev *pdev = to_pci_dev(host_set->dev); struct pdc_host_priv *hpriv = host_set->private_data; - void *dimm_mmio = hpriv->dimm_mmio; + void __iomem *dimm_mmio = hpriv->dimm_mmio; pci_iounmap(pdev, dimm_mmio); kfree(hpriv); @@ -669,8 +669,8 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc) readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */ writel(port_ofs + PDC_DIMM_ATA_PKT, - (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); VPRINTK("submitted ofs 0x%x (%u), seq %u\n", port_ofs + PDC_DIMM_ATA_PKT, port_ofs + PDC_DIMM_ATA_PKT, @@ -747,8 +747,8 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); readl(mmio + PDC_20621_SEQCTL + (seq * 4)); writel(port_ofs + PDC_DIMM_ATA_PKT, - (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); } /* step two - execute ATA command */ @@ -1014,7 +1014,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, idx++; dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size : (long) (window_size - offset); - memcpy_toio((char *) (dimm_mmio + offset / 4), (char *) psource, dist); + memcpy_toio(dimm_mmio + offset / 4, psource, dist); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); @@ -1023,8 +1023,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, for (; (long) size >= (long) window_size ;) { writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio((char *) (dimm_mmio), (char *) psource, - window_size / 4); + memcpy_toio(dimm_mmio, psource, window_size / 4); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); psource += window_size; @@ -1035,7 +1034,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, if (size) { writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio((char *) (dimm_mmio), (char *) psource, size / 4); + memcpy_toio(dimm_mmio, psource, size / 4); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); } -- cgit v1.2.3 From 9aa36e89b5677a98d951cf7bef6d99a0f93ea633 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] iomem annotations (sata_sil) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index ba98a175ee3a..f6f0184e1ac8 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -289,7 +289,7 @@ static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_re static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) { - void *mmio = (void *) sil_scr_addr(ap, sc_reg); + void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); if (mmio) return readl(mmio); return 0xffffffffU; @@ -297,7 +297,7 @@ static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { - void *mmio = (void *) sil_scr_addr(ap, sc_reg); + void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); if (mmio) writel(val, mmio); } -- cgit v1.2.3 From 307e4dc28ee255bf22b431f242f847c9d96fe3fa Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] iomem annotations (sata_vsc) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_vsc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index cf94e0158a8d..877b9fda3965 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -86,7 +86,7 @@ static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) return 0xffffffffU; - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -95,16 +95,16 @@ static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, { if (sc_reg > SCR_CONTROL) return; - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) { - unsigned long mask_addr; + void __iomem *mask_addr; u8 mask; - mask_addr = (unsigned long) ap->host_set->mmio_base + + mask_addr = ap->host_set->mmio_base + VSC_SATA_INT_MASK_OFFSET + ap->port_no; mask = readb(mask_addr); if (ctl & ATA_NIEN) @@ -283,7 +283,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d struct ata_probe_ent *probe_ent = NULL; unsigned long base; int pci_dev_busy = 0; - void *mmio_base; + void __iomem *mmio_base; int rc; if (!printed_version++) -- cgit v1.2.3 From 11e29e21514517f3022a1f30998ac4c7b1197658 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 21 Oct 2005 18:46:32 -0400 Subject: libata: handle early device PIO modes correctly --- drivers/scsi/libata-core.c | 31 +++++++++++++++++++++++++++---- include/linux/ata.h | 13 +++++++++---- 2 files changed, 36 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 175d4646333d..09639e7aaa71 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1082,6 +1082,31 @@ static inline void ata_dump_id(struct ata_device *dev) dev->id[93]); } +/* + * Compute the PIO modes available for this device. This is not as + * trivial as it seems if we must consider early devices correctly. + * + * FIXME: pre IDE drive timing (do we care ?). + */ + +static unsigned int ata_pio_modes(struct ata_device *adev) +{ + u16 modes; + + /* Usual case. Word 53 indicates word 88 is valid */ + if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) { + modes = adev->id[ATA_ID_PIO_MODES] & 0x03; + modes <<= 3; + modes |= 0x7; + return modes; + } + + /* If word 88 isn't valid then Word 51 holds the PIO timing number + for the maximum. Turn it into a mask and return it */ + modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; + return modes; +} + /** * ata_dev_identify - obtain IDENTIFY x DEVICE page * @ap: port on which device we wish to probe resides @@ -1215,10 +1240,8 @@ retry: xfer_modes = dev->id[ATA_ID_UDMA_MODES]; if (!xfer_modes) xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA; - if (!xfer_modes) { - xfer_modes = (dev->id[ATA_ID_PIO_MODES]) << (ATA_SHIFT_PIO + 3); - xfer_modes |= (0x7 << ATA_SHIFT_PIO); - } + if (!xfer_modes) + xfer_modes = ata_pio_modes(dev); ata_dump_id(dev); diff --git a/include/linux/ata.h b/include/linux/ata.h index 630908c9378b..33276d1d05d2 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -42,13 +42,18 @@ enum { ATA_SECT_SIZE = 512, ATA_ID_WORDS = 256, - ATA_ID_PROD_OFS = 27, - ATA_ID_FW_REV_OFS = 23, ATA_ID_SERNO_OFS = 10, - ATA_ID_MAJOR_VER = 80, - ATA_ID_PIO_MODES = 64, + ATA_ID_FW_REV_OFS = 23, + ATA_ID_PROD_OFS = 27, + ATA_ID_OLD_PIO_MODES = 51, + ATA_ID_FIELD_VALID = 53, ATA_ID_MWDMA_MODES = 63, + ATA_ID_PIO_MODES = 64, + ATA_ID_EIDE_DMA_MIN = 65, + ATA_ID_EIDE_PIO = 67, + ATA_ID_EIDE_PIO_IORDY = 68, ATA_ID_UDMA_MODES = 88, + ATA_ID_MAJOR_VER = 80, ATA_ID_PIO4 = (1 << 1), ATA_PCI_CTL_OFS = 2, -- cgit v1.2.3 From 452503f993feffe96e8cc9fbff4888b96e2c5e40 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 21 Oct 2005 19:01:32 -0400 Subject: Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 149 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/libata.h | 39 ++++++++++++ 2 files changed, 188 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 09639e7aaa71..9269fd9b814f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1538,6 +1538,152 @@ void ata_port_disable(struct ata_port *ap) ap->flags |= ATA_FLAG_PORT_DISABLED; } +/* + * This mode timing computation functionality is ported over from + * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik + */ +/* + * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * These were taken from ATA/ATAPI-6 standard, rev 0a, except + * for PIO 5, which is a nonstandard extension and UDMA6, which + * is currently supported only by Maxtor drives. + */ + +static const struct ata_timing ata_timing[] = { + + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + +/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ + + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + +/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */ + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + +/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + + { 0xFF } +}; + +#define ENOUGH(v,unit) (((v)-1)/(unit)+1) +#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) + +static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) +{ + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); +} + +void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, + struct ata_timing *m, unsigned int what) +{ + if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); + if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); + if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); + if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); + if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); + if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); + if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); +} + +static const struct ata_timing* ata_timing_find_mode(unsigned short speed) +{ + const struct ata_timing *t; + + for (t = ata_timing; t->mode != speed; t++) + if (t->mode != 0xFF) + return NULL; + return t; +} + +int ata_timing_compute(struct ata_device *adev, unsigned short speed, + struct ata_timing *t, int T, int UT) +{ + const struct ata_timing *s; + struct ata_timing p; + + /* + * Find the mode. + */ + + if (!(s = ata_timing_find_mode(speed))) + return -EINVAL; + + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MW_DMA cycle timing. + */ + + if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ + memset(&p, 0, sizeof(p)); + if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { + if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; + else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; + } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { + p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; + } + ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); + } + + /* + * Convert the timing to bus clock counts. + */ + + ata_timing_quantize(s, t, T, UT); + + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T + * and some other commands. We have to ensure that the DMA cycle timing is + * slower/equal than the fastest PIO timing. + */ + + if (speed > XFER_PIO_4) { + ata_timing_compute(adev, adev->pio_mode, &p, T, UT); + ata_timing_merge(&p, t, t, ATA_TIMING_ALL); + } + + /* + * Lenghten active & recovery time so that cycle time is correct. + */ + + if (t->act8b + t->rec8b < t->cyc8b) { + t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; + t->rec8b = t->cyc8b - t->act8b; + } + + if (t->active + t->recover < t->cycle) { + t->active += (t->cycle - (t->active + t->recover)) / 2; + t->recover = t->cycle - t->active; + } + + return 0; +} + static struct { unsigned int shift; u8 base; @@ -4764,6 +4910,9 @@ EXPORT_SYMBOL_GPL(ata_dev_id_string); EXPORT_SYMBOL_GPL(ata_dev_config); EXPORT_SYMBOL_GPL(ata_scsi_simulate); +EXPORT_SYMBOL_GPL(ata_timing_compute); +EXPORT_SYMBOL_GPL(ata_timing_merge); + #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); EXPORT_SYMBOL_GPL(ata_pci_host_stop); diff --git a/include/linux/libata.h b/include/linux/libata.h index 0261c55f3483..0e214f8c8f9f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -388,6 +388,19 @@ struct ata_port_info { struct ata_port_operations *port_ops; }; +struct ata_timing { + unsigned short mode; /* ATA mode */ + unsigned short setup; /* t1 */ + unsigned short act8b; /* t2 for 8-bit I/O */ + unsigned short rec8b; /* t2i for 8-bit I/O */ + unsigned short cyc8b; /* t0 for 8-bit I/O */ + unsigned short active; /* t2 or tD */ + unsigned short recover; /* t2i or tK */ + unsigned short cycle; /* t0 */ + unsigned short udma; /* t2CYCTYP/2 */ +}; + +#define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin) extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); @@ -451,6 +464,32 @@ extern int ata_std_bios_param(struct scsi_device *sdev, sector_t capacity, int geom[]); extern int ata_scsi_slave_config(struct scsi_device *sdev); +/* + * Timing helpers + */ +extern int ata_timing_compute(struct ata_device *, unsigned short, + struct ata_timing *, int, int); +extern void ata_timing_merge(const struct ata_timing *, + const struct ata_timing *, struct ata_timing *, + unsigned int); + +enum { + ATA_TIMING_SETUP = (1 << 0), + ATA_TIMING_ACT8B = (1 << 1), + ATA_TIMING_REC8B = (1 << 2), + ATA_TIMING_CYC8B = (1 << 3), + ATA_TIMING_8BIT = ATA_TIMING_ACT8B | ATA_TIMING_REC8B | + ATA_TIMING_CYC8B, + ATA_TIMING_ACTIVE = (1 << 4), + ATA_TIMING_RECOVER = (1 << 5), + ATA_TIMING_CYCLE = (1 << 6), + ATA_TIMING_UDMA = (1 << 7), + ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B | + ATA_TIMING_REC8B | ATA_TIMING_CYC8B | + ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER | + ATA_TIMING_CYCLE | ATA_TIMING_UDMA, +}; + #ifdef CONFIG_PCI struct pci_bits { -- cgit v1.2.3