From a9d7e794ea66902a255be6e87f633286d04c2b39 Mon Sep 17 00:00:00 2001 From: Justin P. Mattock Date: Sat, 24 Mar 2012 09:00:04 -0700 Subject: r8169.c: fix comment typo The below patch fixes a typo that I found while reading the code. Signed-off-by: Justin P. Mattock Signed-off-by: Jiri Kosina --- drivers/net/ethernet/realtek/r8169.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 7a0c800b50ad..7f06508df9ff 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -4267,7 +4267,7 @@ static int rtl8169_open(struct net_device *dev) pm_runtime_get_sync(&pdev->dev); /* - * Rx and Tx desscriptors needs 256 bytes alignment. + * Rx and Tx descriptors needs 256 bytes alignment. * dma_alloc_coherent provides more. */ tp->TxDescArray = dma_alloc_coherent(&pdev->dev, R8169_TX_RING_BYTES, -- cgit v1.2.3 From 409a3e98132c3a4f2aa2854995f8a9dd16cf11ac Mon Sep 17 00:00:00 2001 From: Jonathan Woithe Date: Tue, 27 Mar 2012 13:01:01 +1030 Subject: Email/web address change This patch updates Jonathan Woithe's contact details across the kernel tree. Signed-off-by: Jonathan Woithe Signed-off-by: Jiri Kosina --- CREDITS | 4 ++-- Documentation/sound/oss/ALS | 4 ++-- MAINTAINERS | 2 +- drivers/platform/x86/fujitsu-laptop.c | 2 +- drivers/usb/storage/unusual_devs.h | 2 +- sound/isa/als100.c | 2 +- sound/pci/hda/patch_realtek.c | 2 +- 7 files changed, 9 insertions(+), 9 deletions(-) diff --git a/CREDITS b/CREDITS index 370b4c7da39b..d8fe12a9421f 100644 --- a/CREDITS +++ b/CREDITS @@ -3814,8 +3814,8 @@ D: INFO-SHEET, former maintainer D: Author of the longest-living linux bug N: Jonathan Woithe -E: jwoithe@physics.adelaide.edu.au -W: http://www.physics.adelaide.edu.au/~jwoithe +E: jwoithe@just42.net +W: http:/www.just42.net/jwoithe D: ALS-007 sound card extensions to Sound Blaster driver S: 20 Jordan St S: Valley View, SA 5093 diff --git a/Documentation/sound/oss/ALS b/Documentation/sound/oss/ALS index d01ffbfd5808..bf10bed4574b 100644 --- a/Documentation/sound/oss/ALS +++ b/Documentation/sound/oss/ALS @@ -57,10 +57,10 @@ The resulting sound driver will provide the following capabilities: DSP/PCM/audio out (L&R), FM (L&R) and Mic in (mono). Jonathan Woithe -jwoithe@physics.adelaide.edu.au +jwoithe@just42.net 30 March 1998 Modified 2000-02-26 by Dave Forrest, drf5n@virginia.edu to add ALS100/ALS200 Modified 2000-04-10 by Paul Laufer, pelaufer@csupomona.edu to add ISAPnP info. -Modified 2000-11-19 by Jonathan Woithe, jwoithe@physics.adelaide.edu.au +Modified 2000-11-19 by Jonathan Woithe, jwoithe@just42.net - updated information for kernel 2.4.x. diff --git a/MAINTAINERS b/MAINTAINERS index 252972b6c4a0..1435e6a83dae 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2839,7 +2839,7 @@ S: Maintained F: arch/frv/ FUJITSU LAPTOP EXTRAS -M: Jonathan Woithe +M: Jonathan Woithe L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/fujitsu-laptop.c diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 6b26666b37f2..c4c1a5444b38 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -1,7 +1,7 @@ /*-*-linux-c-*-*/ /* - Copyright (C) 2007,2008 Jonathan Woithe + Copyright (C) 2007,2008 Jonathan Woithe Copyright (C) 2008 Peter Gruber Copyright (C) 2008 Tony Vroon Based on earlier work: diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 856ad92c40de..26844514ac5f 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -110,7 +110,7 @@ UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), -/* Deduced by Jonathan Woithe +/* Deduced by Jonathan Woithe * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message * always fails and confuses drive. */ diff --git a/sound/isa/als100.c b/sound/isa/als100.c index d1f4351fb6ee..2d67c78c9f4b 100644 --- a/sound/isa/als100.c +++ b/sound/isa/als100.c @@ -7,7 +7,7 @@ Thanks to Pierfrancesco 'qM2' Passerini. Generalised for soundcards based on DT-0196 and ALS-007 chips - by Jonathan Woithe : June 2002. + by Jonathan Woithe : June 2002. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a8e82be3d2fc..f6316507d764 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6,7 +6,7 @@ * Copyright (c) 2004 Kailang Yang * PeiSen Hou * Takashi Iwai - * Jonathan Woithe + * Jonathan Woithe * * This driver is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by -- cgit v1.2.3 From a03abdcb8e537912c9c44f283747b995d1788d23 Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Mon, 2 Apr 2012 09:42:22 +0400 Subject: w1: fix slave driver registration error message W1 core prints "Failed to register master driver" if error happens on registering SLAVE driver. Fix it. Signed-off-by: Dmitry Artamonow Acked-by: Evgeniy Polyakov Signed-off-by: Jiri Kosina --- drivers/w1/w1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 9761950697b4..2f2e894ea0c8 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -1027,7 +1027,7 @@ static int __init w1_init(void) retval = driver_register(&w1_slave_driver); if (retval) { printk(KERN_ERR - "Failed to register master driver. err=%d.\n", + "Failed to register slave driver. err=%d.\n", retval); goto err_out_master_unregister; } -- cgit v1.2.3 From 450c6076a79ebb053cf53e43f948de5ab077c573 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 16 Feb 2012 22:49:15 +0100 Subject: Makefile: improve line wrapping Break a few lines that go way over the usual 80 column limit that we prefer. Also adjust the placement of a few line continuations. Signed-off-by: Jesper Juhl Signed-off-by: Jiri Kosina --- Makefile | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/Makefile b/Makefile index e3b23e864a53..34b7006b2c9a 100644 --- a/Makefile +++ b/Makefile @@ -400,8 +400,10 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve # Files to ignore in find ... statements -RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o -export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git +RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \ + -o -name .pc -o -name .hg -o -name .git \) -prune -o +export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ + --exclude CVS --exclude .pc --exclude .hg --exclude .git # =========================================================================== # Rules shared between *config targets and build targets @@ -966,7 +968,7 @@ prepare3: include/config/kernel.release ifneq ($(KBUILD_SRC),) @$(kecho) ' Using $(srctree) as source for kernel' $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ - echo " $(srctree) is not clean, please run 'make mrproper'";\ + echo " $(srctree) is not clean, please run 'make mrproper'"; \ echo " in the '$(srctree)' directory.";\ /bin/false; \ fi; @@ -1003,8 +1005,8 @@ define filechk_utsrelease.h endef define filechk_version.h - (echo \#define LINUX_VERSION_CODE $(shell \ - expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \ + (echo \#define LINUX_VERSION_CODE $(shell \ + expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \ echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) endef -- cgit v1.2.3 From 91fe4d508f29d71133e9a82ebdc1f2274c514b70 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Fri, 17 Feb 2012 17:46:21 +0100 Subject: Fix typo milivolt => millivolt Signed-off-by: Thomas Weber Signed-off-by: Jiri Kosina --- Documentation/hwmon/wm831x | 2 +- drivers/mfd/tps65911-comparator.c | 2 +- drivers/power/bq27x00_battery.c | 2 +- drivers/regulator/tps65910-regulator.c | 20 ++++++++++---------- include/linux/mfd/wm831x/pdata.h | 2 +- 5 files changed, 14 insertions(+), 14 deletions(-) diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x index 24f47d8f6a42..11446757c8c8 100644 --- a/Documentation/hwmon/wm831x +++ b/Documentation/hwmon/wm831x @@ -22,7 +22,7 @@ reporting of all the input values but does not provide any alarms. Voltage Monitoring ------------------ -Voltages are sampled by a 12 bit ADC. Voltages in milivolts are 1.465 +Voltages are sampled by a 12 bit ADC. Voltages in millivolts are 1.465 times the ADC value. Temperature Monitoring diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c index e7ff783aa31e..5a62e6bf89ae 100644 --- a/drivers/mfd/tps65911-comparator.c +++ b/drivers/mfd/tps65911-comparator.c @@ -26,7 +26,7 @@ #define COMP1 1 #define COMP2 2 -/* Comparator 1 voltage selection table in milivolts */ +/* Comparator 1 voltage selection table in millivolts */ static const u16 COMP_VSEL_TABLE[] = { 0, 2500, 2500, 2500, 2500, 2550, 2600, 2650, 2700, 2750, 2800, 2850, 2900, 2950, 3000, 3050, diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index cd1545f57f49..241848745e29 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c @@ -456,7 +456,7 @@ static int bq27x00_battery_capacity_level(struct bq27x00_device_info *di, } /* - * Return the battery Voltage in milivolts + * Return the battery Voltage in millivolts * Or < 0 if something fails. */ static int bq27x00_battery_voltage(struct bq27x00_device_info *di, diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index 5c15ba01e9c7..1711dbf28ea5 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -27,54 +27,54 @@ #define TPS65910_SUPPLY_STATE_ENABLED 0x1 -/* supported VIO voltages in milivolts */ +/* supported VIO voltages in millivolts */ static const u16 VIO_VSEL_table[] = { 1500, 1800, 2500, 3300, }; /* VSEL tables for TPS65910 specific LDOs and dcdc's */ -/* supported VDD3 voltages in milivolts */ +/* supported VDD3 voltages in millivolts */ static const u16 VDD3_VSEL_table[] = { 5000, }; -/* supported VDIG1 voltages in milivolts */ +/* supported VDIG1 voltages in millivolts */ static const u16 VDIG1_VSEL_table[] = { 1200, 1500, 1800, 2700, }; -/* supported VDIG2 voltages in milivolts */ +/* supported VDIG2 voltages in millivolts */ static const u16 VDIG2_VSEL_table[] = { 1000, 1100, 1200, 1800, }; -/* supported VPLL voltages in milivolts */ +/* supported VPLL voltages in millivolts */ static const u16 VPLL_VSEL_table[] = { 1000, 1100, 1800, 2500, }; -/* supported VDAC voltages in milivolts */ +/* supported VDAC voltages in millivolts */ static const u16 VDAC_VSEL_table[] = { 1800, 2600, 2800, 2850, }; -/* supported VAUX1 voltages in milivolts */ +/* supported VAUX1 voltages in millivolts */ static const u16 VAUX1_VSEL_table[] = { 1800, 2500, 2800, 2850, }; -/* supported VAUX2 voltages in milivolts */ +/* supported VAUX2 voltages in millivolts */ static const u16 VAUX2_VSEL_table[] = { 1800, 2800, 2900, 3300, }; -/* supported VAUX33 voltages in milivolts */ +/* supported VAUX33 voltages in millivolts */ static const u16 VAUX33_VSEL_table[] = { 1800, 2000, 2800, 3300, }; -/* supported VMMC voltages in milivolts */ +/* supported VMMC voltages in millivolts */ static const u16 VMMC_VSEL_table[] = { 1800, 2800, 3000, 3300, }; diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index 1d7a3f7b3b5d..dcc9631b3052 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -26,7 +26,7 @@ struct wm831x_backlight_pdata { struct wm831x_backup_pdata { int charger_enable; int no_constant_voltage; /** Disable constant voltage charging */ - int vlim; /** Voltage limit in milivolts */ + int vlim; /** Voltage limit in millivolts */ int ilim; /** Current limit in microamps */ }; -- cgit v1.2.3 From cde0e2ccb86766a874125a400c1784bd5fa56074 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 19 Feb 2012 16:11:59 +0100 Subject: fbdev: s/#if CONFIG/#ifdef CONFIG/ Signed-off-by: Geert Uytterhoeven Acked-by: Florian Tobias Schandinat Signed-off-by: Jiri Kosina --- drivers/video/au1100fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index de9da6774fd9..4da189562a30 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -532,7 +532,7 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev) for (page = (unsigned long)fbdev->fb_mem; page < PAGE_ALIGN((unsigned long)fbdev->fb_mem + fbdev->fb_len); page += PAGE_SIZE) { -#if CONFIG_DMA_NONCOHERENT +#ifdef CONFIG_DMA_NONCOHERENT SetPageReserved(virt_to_page(CAC_ADDR((void *)page))); #else SetPageReserved(virt_to_page(page)); -- cgit v1.2.3 From 5edfe7d84133588c020e5234b5763df8805f1cac Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Thu, 5 Apr 2012 17:02:52 -0700 Subject: doc: fix a few typos Signed-off-by: Masanari Iida Signed-off-by: Jiri Kosina --- Documentation/usb/dwc3.txt | 2 +- Documentation/usb/wusb-cbaf | 2 +- Documentation/video4linux/README.cpia2 | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/usb/dwc3.txt b/Documentation/usb/dwc3.txt index 7b590edae145..1d02c01d1c7c 100644 --- a/Documentation/usb/dwc3.txt +++ b/Documentation/usb/dwc3.txt @@ -28,7 +28,7 @@ Please pick something while reading :) none - primary handler of the EP-interrupt - reads the event and tries to process it. Everything that requries + reads the event and tries to process it. Everything that requires sleeping is handed over to the Thread. The event is saved in an per-endpoint data-structure. We probably have to pay attention not to process events once we diff --git a/Documentation/usb/wusb-cbaf b/Documentation/usb/wusb-cbaf index 426ddaaef96f..8b3d43efce90 100644 --- a/Documentation/usb/wusb-cbaf +++ b/Documentation/usb/wusb-cbaf @@ -36,7 +36,7 @@ COMMAND/ARGS are get-cdid DEVICE - Get the device ID associated to the HOST-CHDI we sent with + Get the device ID associated to the HOST-CHID we sent with 'set-chid'. We might not know about it. set-cc DEVICE diff --git a/Documentation/video4linux/README.cpia2 b/Documentation/video4linux/README.cpia2 index ce8213d28b67..38e742fd0df7 100644 --- a/Documentation/video4linux/README.cpia2 +++ b/Documentation/video4linux/README.cpia2 @@ -12,7 +12,7 @@ gqcam application to view this stream. The driver is implemented as two kernel modules. The cpia2 module contains the camera functions and the V4L interface. The cpia2_usb module contains usb specific functions. The main reason for this was the size of the -module was getting out of hand, so I separted them. It is not likely that +module was getting out of hand, so I separated them. It is not likely that there will be a parallel port version. FEATURES: -- cgit v1.2.3 From 6997991ab0db72ee92b7fd63e70679d415c8e95c Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Thu, 23 Feb 2012 23:42:19 +0900 Subject: mips: Fix printk typos in arc/mips Correct spelling "platfom" to "platform", "deactived" to "deactivated" and "deprectated" to "deprecated" in arch/mips directory. Signed-off-by: Masanari Iida Signed-off-by: Jiri Kosina --- arch/mips/kernel/mips-mt.c | 2 +- arch/mips/lantiq/xway/gpio.c | 2 +- arch/mips/lantiq/xway/gpio_ebu.c | 2 +- arch/mips/lantiq/xway/gpio_stp.c | 2 +- arch/mips/pci/pci-lantiq.c | 2 +- arch/mips/sni/pcimt.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c index c23d11f6851d..b3b0b9464450 100644 --- a/arch/mips/kernel/mips-mt.c +++ b/arch/mips/kernel/mips-mt.c @@ -210,7 +210,7 @@ void mips_mt_set_cpuoptions(void) unsigned int nconfig7 = oconfig7; if (mt_opt_norps) { - printk("\"norps\" option deprectated: use \"rpsctl=\"\n"); + printk("\"norps\" option deprecated: use \"rpsctl=\"\n"); } if (mt_opt_rpsctl >= 0) { printk("34K return prediction stack override set to %d.\n", diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c index d2fa98f3c78d..c429a5bc080f 100644 --- a/arch/mips/lantiq/xway/gpio.c +++ b/arch/mips/lantiq/xway/gpio.c @@ -188,7 +188,7 @@ int __init ltq_gpio_init(void) int ret = platform_driver_register(<q_gpio_driver); if (ret) - pr_info("ltq_gpio : Error registering platfom driver!"); + pr_info("ltq_gpio : Error registering platform driver!"); return ret; } diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c index b91c7f17f10f..aae17170472f 100644 --- a/arch/mips/lantiq/xway/gpio_ebu.c +++ b/arch/mips/lantiq/xway/gpio_ebu.c @@ -119,7 +119,7 @@ static int __init ltq_ebu_init(void) int ret = platform_driver_register(<q_ebu_driver); if (ret) - pr_info("ltq_ebu : Error registering platfom driver!"); + pr_info("ltq_ebu : Error registering platform driver!"); return ret; } diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c index ff9991cddeaa..fd07d87adaa9 100644 --- a/arch/mips/lantiq/xway/gpio_stp.c +++ b/arch/mips/lantiq/xway/gpio_stp.c @@ -150,7 +150,7 @@ int __init ltq_stp_init(void) int ret = platform_driver_register(<q_stp_driver); if (ret) - pr_info("ltq_stp: error registering platfom driver"); + pr_info("ltq_stp: error registering platform driver"); return ret; } diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index be1e1afe12c3..df3dca0ca622 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -296,7 +296,7 @@ int __init pcibios_init(void) { int ret = platform_driver_register(<q_pci_driver); if (ret) - printk(KERN_INFO "ltq_pci: Error registering platfom driver!"); + printk(KERN_INFO "ltq_pci: Error registering platform driver!"); return ret; } diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c index ed3b3d317358..cdb1417fba59 100644 --- a/arch/mips/sni/pcimt.c +++ b/arch/mips/sni/pcimt.c @@ -29,7 +29,7 @@ static void __init sni_pcimt_sc_init(void) scsiz = cacheconf & 7; if (scsiz == 0) { - printk("Second level cache is deactived.\n"); + printk("Second level cache is deactivated.\n"); return; } if (scsiz >= 6) { -- cgit v1.2.3 From 04bd27aed1459ff4d63d1ab6b0ac26b1e550a121 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 26 Feb 2012 23:51:53 +0100 Subject: radeon: remove redundant ';' from radeon_vm_bo_update_pte() return statement needs just one semi-colon Signed-off-by: Jesper Juhl Signed-off-by: Jiri Kosina --- drivers/gpu/drm/radeon/radeon_gart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 010dad8b66ae..d5b1adc457af 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -551,7 +551,7 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, /* nothing to do if vm isn't bound */ if (vm->id == -1) - return 0;; + return 0; bo_va = radeon_bo_va(bo, vm); if (bo_va == NULL) { -- cgit v1.2.3 From 9c017abc50f00e80aee6a705a9207fa818a48dda Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 27 Feb 2012 00:04:56 +0100 Subject: btrfs: assignment in write_dev_flush() doesn't need two semi-colons One is enough. Signed-off-by: Jesper Juhl Signed-off-by: Jiri Kosina --- fs/btrfs/disk-io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 811d9f918b1c..d24a841a8722 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2732,7 +2732,7 @@ static int write_dev_flush(struct btrfs_device *device, int wait) * one reference for us, and we leave it for the * caller */ - device->flush_bio = NULL;; + device->flush_bio = NULL; bio = bio_alloc(GFP_NOFS, 0); if (!bio) return -ENOMEM; -- cgit v1.2.3 From 2975b0231600f4628512d51550a4e2cfde7d6358 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 28 Feb 2012 10:49:36 -0800 Subject: scsi: Use vsprintf extention %pf with builtin_return_address Emit the function name not the address when possible. builtin_return_address() gives an address. When building a kernel with CONFIG_KALLSYMS, emit the actual function name not the address. Signed-off-by: Joe Perches Acked-by: David S. Miller Signed-off-by: Jiri Kosina --- drivers/scsi/esp_scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c index 394ed9e79fd4..34552bf1c023 100644 --- a/drivers/scsi/esp_scsi.c +++ b/drivers/scsi/esp_scsi.c @@ -1000,7 +1000,7 @@ static int esp_check_spur_intr(struct esp *esp) static void esp_schedule_reset(struct esp *esp) { - esp_log_reset("ESP: esp_schedule_reset() from %p\n", + esp_log_reset("ESP: esp_schedule_reset() from %pf\n", __builtin_return_address(0)); esp->flags |= ESP_FLAG_RESETTING; esp_event(esp, ESP_EVENT_RESET); -- cgit v1.2.3 From bfa346ad6b4dd88c19f560b5b0527d93fa05833b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 28 Feb 2012 10:49:38 -0800 Subject: gadget: Use vsprintf extention %pf with builtin_return_address Emit the function name not the address when possible. builtin_return_address() gives an address. When building a kernel with CONFIG_KALLSYMS, emit the actual function name not the address. Signed-off-by: Joe Perches Acked-by: Felipe Balbi Signed-off-by: Jiri Kosina --- drivers/usb/gadget/u_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 6597a6813e43..a553beeb86d5 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -920,7 +920,7 @@ static int gs_put_char(struct tty_struct *tty, unsigned char ch) unsigned long flags; int status; - pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %p\n", + pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %pf\n", port->port_num, tty, ch, __builtin_return_address(0)); spin_lock_irqsave(&port->port_lock, flags); -- cgit v1.2.3 From a19568ebfaf7df963be344f1052b3de2530d933c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 28 Feb 2012 10:49:31 -0800 Subject: alpha: Use vsprintf extention %pf with builtin_return_address Emit the function name not the address when possible. builtin_return_address() gives an address. When building a kernel with CONFIG_KALLSYMS, emit the actual function name not the address. Signed-off-by: Joe Perches Signed-off-by: Jiri Kosina --- arch/alpha/kernel/pci_iommu.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c index 43610804987d..9460b90077ca 100644 --- a/arch/alpha/kernel/pci_iommu.c +++ b/arch/alpha/kernel/pci_iommu.c @@ -236,7 +236,7 @@ static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask) ok = 0; /* If both conditions above are met, we are fine. */ - DBGA("pci_dac_dma_supported %s from %p\n", + DBGA("pci_dac_dma_supported %s from %pf\n", ok ? "yes" : "no", __builtin_return_address(0)); return ok; @@ -268,7 +268,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size, && paddr + size <= __direct_map_size) { ret = paddr + __direct_map_base; - DBGA2("pci_map_single: [%p,%zx] -> direct %llx from %p\n", + DBGA2("pci_map_single: [%p,%zx] -> direct %llx from %pf\n", cpu_addr, size, ret, __builtin_return_address(0)); return ret; @@ -279,7 +279,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size, if (dac_allowed) { ret = paddr + alpha_mv.pci_dac_offset; - DBGA2("pci_map_single: [%p,%zx] -> DAC %llx from %p\n", + DBGA2("pci_map_single: [%p,%zx] -> DAC %llx from %pf\n", cpu_addr, size, ret, __builtin_return_address(0)); return ret; @@ -316,7 +316,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size, ret = arena->dma_base + dma_ofs * PAGE_SIZE; ret += (unsigned long)cpu_addr & ~PAGE_MASK; - DBGA2("pci_map_single: [%p,%zx] np %ld -> sg %llx from %p\n", + DBGA2("pci_map_single: [%p,%zx] np %ld -> sg %llx from %pf\n", cpu_addr, size, npages, ret, __builtin_return_address(0)); return ret; @@ -385,14 +385,14 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr, && dma_addr < __direct_map_base + __direct_map_size) { /* Nothing to do. */ - DBGA2("pci_unmap_single: direct [%llx,%zx] from %p\n", + DBGA2("pci_unmap_single: direct [%llx,%zx] from %pf\n", dma_addr, size, __builtin_return_address(0)); return; } if (dma_addr > 0xffffffff) { - DBGA2("pci64_unmap_single: DAC [%llx,%zx] from %p\n", + DBGA2("pci64_unmap_single: DAC [%llx,%zx] from %pf\n", dma_addr, size, __builtin_return_address(0)); return; } @@ -424,7 +424,7 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr, spin_unlock_irqrestore(&arena->lock, flags); - DBGA2("pci_unmap_single: sg [%llx,%zx] np %ld from %p\n", + DBGA2("pci_unmap_single: sg [%llx,%zx] np %ld from %pf\n", dma_addr, size, npages, __builtin_return_address(0)); } @@ -446,7 +446,7 @@ try_again: cpu_addr = (void *)__get_free_pages(gfp, order); if (! cpu_addr) { printk(KERN_INFO "pci_alloc_consistent: " - "get_free_pages failed from %p\n", + "get_free_pages failed from %pf\n", __builtin_return_address(0)); /* ??? Really atomic allocation? Otherwise we could play with vmalloc and sg if we can't find contiguous memory. */ @@ -465,7 +465,7 @@ try_again: goto try_again; } - DBGA2("pci_alloc_consistent: %zx -> [%p,%llx] from %p\n", + DBGA2("pci_alloc_consistent: %zx -> [%p,%llx] from %pf\n", size, cpu_addr, *dma_addrp, __builtin_return_address(0)); return cpu_addr; @@ -484,7 +484,7 @@ static void alpha_pci_free_coherent(struct device *dev, size_t size, pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL); free_pages((unsigned long)cpu_addr, get_order(size)); - DBGA2("pci_free_consistent: [%llx,%zx] from %p\n", + DBGA2("pci_free_consistent: [%llx,%zx] from %pf\n", dma_addr, size, __builtin_return_address(0)); } -- cgit v1.2.3 From 023dcd25ce409506f992f9e3a822424de035fe05 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 28 Feb 2012 10:49:32 -0800 Subject: arm: Use vsprintf extention %pf with builtin_return_address Emit the function name not the address when possible. builtin_return_address() gives an address. When building a kernel with CONFIG_KALLSYMS, emit the actual function name not the address. Signed-off-by: Joe Perches Signed-off-by: Jiri Kosina --- arch/arm/nwfpe/fpmodule.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c index cb7658e8acc5..4e729f055a81 100644 --- a/arch/arm/nwfpe/fpmodule.c +++ b/arch/arm/nwfpe/fpmodule.c @@ -147,7 +147,7 @@ void float_raise(signed char flags) #ifdef CONFIG_DEBUG_USER if (flags & debug) printk(KERN_DEBUG - "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n", + "NWFPE: %s[%d] takes exception %08x at %pf from %08lx\n", current->comm, current->pid, flags, __builtin_return_address(0), GET_USERREG()->ARM_pc); #endif -- cgit v1.2.3 From 4deb508e91624ab0ff1812825870c7dcf7812690 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 28 Feb 2012 10:49:35 -0800 Subject: parisc: Use vsprintf extention %pf with builtin_return_address Emit the function name not the address when possible. builtin_return_address() gives an address. When building a kernel with CONFIG_KALLSYMS, emit the actual function name not the address. Signed-off-by: Joe Perches Signed-off-by: Jiri Kosina --- drivers/parisc/superio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index e3b76d409dee..5003458980d3 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -348,7 +348,7 @@ int superio_fixup_irq(struct pci_dev *pcidev) BUG(); return -1; } - printk("superio_fixup_irq(%s) ven 0x%x dev 0x%x from %p\n", + printk("superio_fixup_irq(%s) ven 0x%x dev 0x%x from %pf\n", pci_name(pcidev), pcidev->vendor, pcidev->device, __builtin_return_address(0)); -- cgit v1.2.3 From f7232f0808d9c9899cbecf79296b0293217a27cd Mon Sep 17 00:00:00 2001 From: Lucia Rosculete Date: Sat, 3 Mar 2012 16:18:47 +0200 Subject: semaphore: fix improper comment reference to mutex Replace "mutex" with "semaphore" in down_trylock comment Signed-off-by: Lucia Rosculete Signed-off-by: Jiri Kosina --- kernel/semaphore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/semaphore.c b/kernel/semaphore.c index 60636a4e25c3..4567fc020fe3 100644 --- a/kernel/semaphore.c +++ b/kernel/semaphore.c @@ -118,7 +118,7 @@ EXPORT_SYMBOL(down_killable); * down_trylock - try to acquire the semaphore, without waiting * @sem: the semaphore to be acquired * - * Try to acquire the semaphore atomically. Returns 0 if the mutex has + * Try to acquire the semaphore atomically. Returns 0 if the semaphore has * been acquired successfully or 1 if it it cannot be acquired. * * NOTE: This return value is inverted from both spin_trylock and -- cgit v1.2.3 From 86d2f6fbb957e7500e5140a698db9a6643a1f453 Mon Sep 17 00:00:00 2001 From: Octavian Moraru Date: Sat, 3 Mar 2012 16:19:39 +0200 Subject: mtg: docg3: fix comment errors occured ==> occurred successfull ==> successful adressing ==> addressing Signed-off-by: Octavian Moraru Signed-off-by: Jiri Kosina --- drivers/mtd/devices/docg3.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index ad11ef0a81f4..9afda6950df7 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -388,7 +388,7 @@ static void doc_set_device_id(struct docg3 *docg3, int id) * leveling counters are stored. To access this last area of 4 bytes, a special * mode must be input to the flash ASIC. * - * Returns 0 if no error occured, -EIO else. + * Returns 0 if no error occurred, -EIO else. */ static int doc_set_extra_page_mode(struct docg3 *docg3) { @@ -685,7 +685,7 @@ out: * - one read of 512 bytes at offset 0 * - one read of 512 bytes at offset 512 + 16 * - * Returns 0 if successful, -EIO if a read error occured. + * Returns 0 if successful, -EIO if a read error occurred. */ static int doc_read_page_prepare(struct docg3 *docg3, int block0, int block1, int page, int offset) @@ -843,7 +843,7 @@ static void calc_block_sector(loff_t from, int *block0, int *block1, int *page, * * Reads flash memory OOB area of pages. * - * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured + * Returns 0 if read successful, of -EIO, -EINVAL if an error occurred */ static int doc_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) @@ -971,7 +971,7 @@ err: * Reads flash memory pages. This function does not read the OOB chunk, but only * the page data. * - * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured + * Returns 0 if read successful, of -EIO, -EINVAL if an error occurred */ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) @@ -1109,7 +1109,7 @@ static int doc_get_op_status(struct docg3 *docg3) * Wait for the chip to be ready again after erase or write operation, and check * erase/write status. * - * Returns 0 if erase successfull, -EIO if erase/write issue, -ETIMEOUT if + * Returns 0 if erase successful, -EIO if erase/write issue, -ETIMEOUT if * timeout */ static int doc_write_erase_wait_status(struct docg3 *docg3) @@ -1186,7 +1186,7 @@ static int doc_erase_block(struct docg3 *docg3, int block0, int block1) * Erase a bunch of contiguous blocks, by pairs, as a "mtd" page of 1024 is * split into 2 pages of 512 bytes on 2 contiguous blocks. * - * Returns 0 if erase successful, -EINVAL if adressing error, -EIO if erase + * Returns 0 if erase successful, -EINVAL if addressing error, -EIO if erase * issue */ static int doc_erase(struct mtd_info *mtd, struct erase_info *info) @@ -1395,7 +1395,7 @@ static int doc_backup_oob(struct docg3 *docg3, loff_t to, * Or provide data without OOB, and then a all zeroed OOB will be used (ECC will * still be filled in if asked for). * - * Returns 0 is successfull, EINVAL if length is not 14 bytes + * Returns 0 is successful, EINVAL if length is not 14 bytes */ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, struct mtd_oob_ops *ops) @@ -1922,7 +1922,7 @@ static void doc_release_device(struct mtd_info *mtd) * docg3_resume - Awakens docg3 floor * @pdev: platfrom device * - * Returns 0 (always successfull) + * Returns 0 (always successful) */ static int docg3_resume(struct platform_device *pdev) { -- cgit v1.2.3 From 61282f37927143e45b03153f3e7b48d6b702147a Mon Sep 17 00:00:00 2001 From: Alexandra Vintila Date: Sat, 3 Mar 2012 16:20:58 +0200 Subject: atm: fix comments Signed-off-by: Alexandra Vintila Signed-off-by: Jiri Kosina --- net/atm/lec.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/atm/lec.h b/net/atm/lec.h index dfc071966463..f8af890e8602 100644 --- a/net/atm/lec.h +++ b/net/atm/lec.h @@ -55,11 +55,11 @@ struct lane2_ops { * frames. * * 1. Dix Ethernet EtherType frames encoded by placing EtherType - * field in h_type field. Data follows immediatelly after header. + * field in h_type field. Data follows immediately after header. * 2. LLC Data frames whose total length, including LLC field and data, * but not padding required to meet the minimum data frame length, * is less than 1536(0x0600) MUST be encoded by placing that length - * in the h_type field. The LLC field follows header immediatelly. + * in the h_type field. The LLC field follows header immediately. * 3. LLC data frames longer than this maximum MUST be encoded by placing * the value 0 in the h_type field. * -- cgit v1.2.3 From b3aa1584e9f3449b0669ab2beb9b9bf99874e1d6 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 9 Apr 2012 10:44:57 -0700 Subject: workqueue: Fix workqueue_execute_end() comment workqueue_execute_end() is called after the callback function, not before. Signed-off-by: Stephen Boyd Acked-by: Tejun Heo Signed-off-by: Jiri Kosina --- include/trace/events/workqueue.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h index 7d497291c85d..4018f5058f27 100644 --- a/include/trace/events/workqueue.h +++ b/include/trace/events/workqueue.h @@ -103,7 +103,7 @@ TRACE_EVENT(workqueue_execute_start, ); /** - * workqueue_execute_end - called immediately before the workqueue callback + * workqueue_execute_end - called immediately after the workqueue callback * @work: pointer to struct work_struct * * Allows to track workqueue execution. -- cgit v1.2.3 From 35fca53e15a696adbea300a981df4bbfb09a76d6 Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Sun, 15 Apr 2012 20:42:28 +0800 Subject: mmzone: fix comment typo coelesce -> coalesce Signed-off-by: Wang YanQing Signed-off-by: Jiri Kosina --- include/linux/mmzone.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index dff711509661..41aa49b74821 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -30,7 +30,7 @@ /* * PAGE_ALLOC_COSTLY_ORDER is the order at which allocations are deemed * costly to service. That is between allocation orders which should - * coelesce naturally under reasonable reclaim pressure and those which + * coalesce naturally under reasonable reclaim pressure and those which * will not. */ #define PAGE_ALLOC_COSTLY_ORDER 3 -- cgit v1.2.3 From b6cafa274d4fb272535ba75c714d25c05609146c Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Mon, 27 Feb 2012 23:28:38 +0900 Subject: radeon: Fix typo in radeon_gem.c Correct spelling "withou" to "without" in drivers/gpu/drm/radeon/radeon_gem.c Signed-off-by: Masanari Iida Signed-off-by: Jiri Kosina --- drivers/gpu/drm/radeon/radeon_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index c7008b5210f7..0519b05968b5 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -91,7 +91,7 @@ int radeon_gem_set_domain(struct drm_gem_object *gobj, } if (!domain) { /* Do nothings */ - printk(KERN_WARNING "Set domain withou domain !\n"); + printk(KERN_WARNING "Set domain without domain !\n"); return 0; } if (domain == RADEON_GEM_DOMAIN_CPU) { -- cgit v1.2.3 From a7e0e4e99fabe0094fcb0b011b741558b8b28fa7 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Tue, 20 Mar 2012 16:46:14 -0700 Subject: x86: Fix typo in MODULE_DEVICE_TABLE example: s/x86_cpu/x86cpu/ Signed-off-by: Josh Triplett Signed-off-by: Jiri Kosina --- arch/x86/kernel/cpu/match.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/match.c b/arch/x86/kernel/cpu/match.c index 5502b289341b..36565373af87 100644 --- a/arch/x86/kernel/cpu/match.c +++ b/arch/x86/kernel/cpu/match.c @@ -23,7 +23,7 @@ * %X86_MODEL_ANY, %X86_FEATURE_ANY or 0 (except for vendor) * * Arrays used to match for this should also be declared using - * MODULE_DEVICE_TABLE(x86_cpu, ...) + * MODULE_DEVICE_TABLE(x86cpu, ...) * * This always matches against the boot cpu, assuming models and features are * consistent over all CPUs. -- cgit v1.2.3 From 3b729f7647875624dc498b65f3244b2edc9f4a07 Mon Sep 17 00:00:00 2001 From: Santosh Y Date: Sun, 8 Apr 2012 18:47:09 +0530 Subject: scsi: fix comment spelling fix recory->recovery Signed-off-by: Santosh Y Signed-off-by: Jiri Kosina --- drivers/scsi/scsi_error.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 2cfcbffa41fd..fbda664f584c 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -664,7 +664,7 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd) } /** - * scsi_eh_prep_cmnd - Save a scsi command info as part of error recory + * scsi_eh_prep_cmnd - Save a scsi command info as part of error recovery * @scmd: SCSI command structure to hijack * @ses: structure to save restore information * @cmnd: CDB to send. Can be NULL if no new cmnd is needed @@ -739,7 +739,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses, EXPORT_SYMBOL(scsi_eh_prep_cmnd); /** - * scsi_eh_restore_cmnd - Restore a scsi command info as part of error recory + * scsi_eh_restore_cmnd - Restore a scsi command info as part of error recovery * @scmd: SCSI command structure to restore * @ses: saved information from a coresponding call to scsi_eh_prep_cmnd * @@ -762,7 +762,7 @@ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses) EXPORT_SYMBOL(scsi_eh_restore_cmnd); /** - * scsi_send_eh_cmnd - submit a scsi command as part of error recory + * scsi_send_eh_cmnd - submit a scsi command as part of error recovery * @scmd: SCSI command structure to hijack * @cmnd: CDB to send * @cmnd_size: size in bytes of @cmnd -- cgit v1.2.3 From c94bed8e1960587d3d93664b11ebf22677c1a541 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 10 Apr 2012 00:22:13 +0900 Subject: Documentation: Fix typo in multiple files in Documentation Correct multiple spelling typo in Documentation. Signed-off-by: Masanari Iida Acked-by: Rob Landley Reported-by: Anders Larsen Signed-off-by: Jiri Kosina --- Documentation/ABI/testing/sysfs-bus-usb | 4 ++-- Documentation/DocBook/kernel-hacking.tmpl | 2 +- Documentation/DocBook/libata.tmpl | 2 +- Documentation/DocBook/media/v4l/controls.xml | 6 ++--- Documentation/blackfin/bfin-gpio-notes.txt | 2 +- .../devicetree/bindings/net/can/fsl-flexcan.txt | 2 +- Documentation/dvb/opera-firmware.txt | 4 ++-- Documentation/edac.txt | 2 +- Documentation/filesystems/nfs/pnfs.txt | 2 +- Documentation/filesystems/qnx6.txt | 28 +++++++++++----------- Documentation/hwmon/it87 | 2 +- Documentation/memory-hotplug.txt | 2 +- Documentation/networking/can.txt | 2 +- Documentation/parisc/debugging | 2 +- Documentation/sound/alsa/compress_offload.txt | 2 +- Documentation/static-keys.txt | 2 +- 16 files changed, 33 insertions(+), 33 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 7c22a532fdfb..303923b67bb4 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -189,7 +189,7 @@ Contact: Matthew Garrett Description: Some information about whether a given USB device is physically fixed to the platform can be inferred from a - combination of hub decriptor bits and platform-specific data + combination of hub descriptor bits and platform-specific data such as ACPI. This file will read either "removable" or "fixed" if the information is available, and "unknown" - otherwise. \ No newline at end of file + otherwise. diff --git a/Documentation/DocBook/kernel-hacking.tmpl b/Documentation/DocBook/kernel-hacking.tmpl index 07a9c48de5a2..eee71426ecb8 100644 --- a/Documentation/DocBook/kernel-hacking.tmpl +++ b/Documentation/DocBook/kernel-hacking.tmpl @@ -1289,7 +1289,7 @@ static struct block_device_operations opt_fops = { * Sparc assembly will do this to ya. */ C_LABEL(cputypvar): - .asciz "compatability" + .asciz "compatibility" /* Tested on SS-5, SS-10. Probably someone at Sun applied a spell-checker. */ .align 4 diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 31df1aa00710..deb71baed328 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -918,7 +918,7 @@ and other resources, etc. HSM violation This error is indicated when STATUS value doesn't match HSM - requirement during issuing or excution any ATA/ATAPI command. + requirement during issuing or execution any ATA/ATAPI command. diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index b84f25e9cc87..dd03cf4a6539 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -2023,7 +2023,7 @@ Possible values are: integer Cyclic intra macroblock refresh. This is the number of continuous macroblocks -refreshed every frame. Each frame a succesive set of macroblocks is refreshed until the cycle completes and starts from the +refreshed every frame. Each frame a successive set of macroblocks is refreshed until the cycle completes and starts from the top of the frame. Applicable to H264, H263 and MPEG4 encoder. @@ -2183,7 +2183,7 @@ Applicable to the MPEG4 and H264 encoders. integer The Video Buffer Verifier size in kilobytes, it is used as a limitation of frame skip. -The VBV is defined in the standard as a mean to verify that the produced stream will be succesfully decoded. +The VBV is defined in the standard as a mean to verify that the produced stream will be successfully decoded. The standard describes it as "Part of a hypothetical decoder that is conceptually connected to the output of the encoder. Its purpose is to provide a constraint on the variability of the data rate that an encoder or editing process may produce.". @@ -2196,7 +2196,7 @@ Applicable to the MPEG1, MPEG2, MPEG4 encoders. integer The Coded Picture Buffer size in kilobytes, it is used as a limitation of frame skip. -The CPB is defined in the H264 standard as a mean to verify that the produced stream will be succesfully decoded. +The CPB is defined in the H264 standard as a mean to verify that the produced stream will be successfully decoded. Applicable to the H264 encoder. diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt index d36b01f778b9..d245f39c3d01 100644 --- a/Documentation/blackfin/bfin-gpio-notes.txt +++ b/Documentation/blackfin/bfin-gpio-notes.txt @@ -53,7 +53,7 @@ 3. But there are some exceptions - Kernel permit the identical GPIO be requested both as GPIO and GPIO - interrut. + interrupt. Some drivers, like gpio-keys, need this behavior. Kernel only print out warning messages like, bfin-gpio: GPIO 24 is already reserved by gpio-keys: BTN0, and you are diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index 1ad80d5865a9..f31b686d4556 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -1,4 +1,4 @@ -Flexcan CAN contoller on Freescale's ARM and PowerPC system-on-a-chip (SOC). +Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC). Required properties: diff --git a/Documentation/dvb/opera-firmware.txt b/Documentation/dvb/opera-firmware.txt index 93e784c2607b..fb6683188ef7 100644 --- a/Documentation/dvb/opera-firmware.txt +++ b/Documentation/dvb/opera-firmware.txt @@ -8,7 +8,7 @@ from the windriver disk into this directory. Then run -./get_dvb_firware opera1 +./get_dvb_firmware opera1 and after that you have 2 files: @@ -24,4 +24,4 @@ After that the driver can load the firmware in kernel config and have hotplug running). -Marco Gittler \ No newline at end of file +Marco Gittler diff --git a/Documentation/edac.txt b/Documentation/edac.txt index fdcc49fad8e1..03df2b020332 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -734,7 +734,7 @@ were done at i7core_edac driver. This chapter will cover those differences associated with a physical CPU socket. Each MC have 3 physical read channels, 3 physical write channels and - 3 logic channels. The driver currenty sees it as just 3 channels. + 3 logic channels. The driver currently sees it as just 3 channels. Each channel can have up to 3 DIMMs. The minimum known unity is DIMMs. There are no information about csrows. diff --git a/Documentation/filesystems/nfs/pnfs.txt b/Documentation/filesystems/nfs/pnfs.txt index c7919c6e3bea..52ae07f5f578 100644 --- a/Documentation/filesystems/nfs/pnfs.txt +++ b/Documentation/filesystems/nfs/pnfs.txt @@ -93,7 +93,7 @@ The API to the login script is as follows: (allways exists) (More protocols can be defined in the future. The client does not interpret this string it is - passed unchanged as recieved from the Server) + passed unchanged as received from the Server) -o osdname of the requested target OSD (Might be empty) (A string which denotes the OSD name, there is a diff --git a/Documentation/filesystems/qnx6.txt b/Documentation/filesystems/qnx6.txt index 050223ea03c7..e59f2f09f56e 100644 --- a/Documentation/filesystems/qnx6.txt +++ b/Documentation/filesystems/qnx6.txt @@ -17,7 +17,7 @@ concepts of blocks, inodes and directories. On QNX it is possible to create little endian and big endian qnx6 filesystems. This feature makes it possible to create and use a different endianness fs for the target (QNX is used on quite a range of embedded systems) plattform -running on a different endianess. +running on a different endianness. The Linux driver handles endianness transparently. (LE and BE) Blocks @@ -26,7 +26,7 @@ Blocks The space in the device or file is split up into blocks. These are a fixed size of 512, 1024, 2048 or 4096, which is decided when the filesystem is created. -Blockpointers are 32bit, so the maximum space that can be adressed is +Blockpointers are 32bit, so the maximum space that can be addressed is 2^32 * 4096 bytes or 16TB The superblocks @@ -47,16 +47,16 @@ inactive superblock. Each superblock holds a set of root inodes for the different filesystem parts. (Inode, Bitmap and Longfilenames) Each of these root nodes holds information like total size of the stored -data and the adressing levels in that specific tree. -If the level value is 0, up to 16 direct blocks can be adressed by each +data and the addressing levels in that specific tree. +If the level value is 0, up to 16 direct blocks can be addressed by each node. -Level 1 adds an additional indirect adressing level where each indirect -adressing block holds up to blocksize / 4 bytes pointers to data blocks. -Level 2 adds an additional indirect adressig block level (so, already up -to 16 * 256 * 256 = 1048576 blocks that can be adressed by such a tree)a +Level 1 adds an additional indirect addressing level where each indirect +addressing block holds up to blocksize / 4 bytes pointers to data blocks. +Level 2 adds an additional indirect addressing block level (so, already up +to 16 * 256 * 256 = 1048576 blocks that can be addressed by such a tree). Unused block pointers are always set to ~0 - regardless of root node, -indirect adressing blocks or inodes. +indirect addressing blocks or inodes. Data leaves are always on the lowest level. So no data is stored on upper tree levels. @@ -64,7 +64,7 @@ The first Superblock is located at 0x2000. (0x2000 is the bootblock size) The Audi MMI 3G first superblock directly starts at byte 0. Second superblock position can either be calculated from the superblock information (total number of filesystem blocks) or by taking the highest -device address, zeroing the last 3 bytes and then substracting 0x1000 from +device address, zeroing the last 3 bytes and then subtracting 0x1000 from that address. 0x1000 is the size reserved for each superblock - regardless of the @@ -83,8 +83,8 @@ size, number of blocks used, access time, change time and modification time. Object mode field is POSIX format. (which makes things easier) There are also pointers to the first 16 blocks, if the object data can be -adressed with 16 direct blocks. -For more than 16 blocks an indirect adressing in form of another tree is +addressed with 16 direct blocks. +For more than 16 blocks an indirect addressing in form of another tree is used. (scheme is the same as the one used for the superblock root nodes) The filesize is stored 64bit. Inode counting starts with 1. (whilst long @@ -118,13 +118,13 @@ no block pointers and the directory file record pointing to the target file inode. Character and block special devices do not exist in QNX as those files -are handled by the QNX kernel/drivers and created in /dev independant of the +are handled by the QNX kernel/drivers and created in /dev independent of the underlaying filesystem. Long filenames -------------- -Long filenames are stored in a seperate adressing tree. The staring point +Long filenames are stored in a separate addressing tree. The staring point is the longfilename root node in the active superblock. Each data block (tree leaves) holds one long filename. That filename is limited to 510 bytes. The first two starting bytes are used as length field diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 23b7def21ba8..fba745571684 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -63,7 +63,7 @@ Module Parameters Hardware Interfaces ------------------- -All the chips suported by this driver are LPC Super-I/O chips, accessed +All the chips supported by this driver are LPC Super-I/O chips, accessed through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an SMBus interface to the hardware monitoring functions. This driver no longer supports this interface though, as it is slower and less reliable diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt index 8f485d72cf25..6d0c2519cf47 100644 --- a/Documentation/memory-hotplug.txt +++ b/Documentation/memory-hotplug.txt @@ -341,7 +341,7 @@ Need more implementation yet.... -------------------------------- 8. Memory hotplug event notifier -------------------------------- -Memory hotplug has event notifer. There are 6 types of notification. +Memory hotplug has event notifier. There are 6 types of notification. MEMORY_GOING_ONLINE Generated before new memory becomes available in order to be able to diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 56ca3b75376e..ac295399f0d4 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -649,7 +649,7 @@ solution for a couple of reasons: The CAN device must be configured via netlink interface. The supported netlink message types are defined and briefly described in "include/linux/can/netlink.h". CAN link support for the program "ip" - of the IPROUTE2 utility suite is avaiable and it can be used as shown + of the IPROUTE2 utility suite is available and it can be used as shown below: - Setting CAN device properties: diff --git a/Documentation/parisc/debugging b/Documentation/parisc/debugging index d728594058e5..7d75223fa18d 100644 --- a/Documentation/parisc/debugging +++ b/Documentation/parisc/debugging @@ -34,6 +34,6 @@ registers interruption handlers read to find out where the machine was interrupted - so if you get an interruption between the instruction that clears the Q bit and the RFI that sets it again you don't know where exactly it happened. If you're lucky the IAOQ will point to the -instrucion that cleared the Q bit, if you're not it points anywhere +instruction that cleared the Q bit, if you're not it points anywhere at all. Usually Q bit problems will show themselves in unexplainable system hangs or running off the end of physical memory. diff --git a/Documentation/sound/alsa/compress_offload.txt b/Documentation/sound/alsa/compress_offload.txt index c83a835350f0..90e9b3a11abc 100644 --- a/Documentation/sound/alsa/compress_offload.txt +++ b/Documentation/sound/alsa/compress_offload.txt @@ -18,7 +18,7 @@ processing. Support for such hardware has not been very good in Linux, mostly because of a lack of a generic API available in the mainline kernel. -Rather than requiring a compability break with an API change of the +Rather than requiring a compatibility break with an API change of the ALSA PCM interface, a new 'Compressed Data' API is introduced to provide a control and data-streaming interface for audio DSPs. diff --git a/Documentation/static-keys.txt b/Documentation/static-keys.txt index d93f3c00f245..9f5263d3152c 100644 --- a/Documentation/static-keys.txt +++ b/Documentation/static-keys.txt @@ -235,7 +235,7 @@ label case adds: 6 (mov) + 2 (test) + 2 (jne) = 10 - 5 (5 byte jump 0) = 5 addition bytes. If we then include the padding bytes, the jump label code saves, 16 total bytes -of instruction memory for this small fucntion. In this case the non-jump label +of instruction memory for this small function. In this case the non-jump label function is 80 bytes long. Thus, we have have saved 20% of the instruction footprint. We can in fact improve this even further, since the 5-byte no-op really can be a 2-byte no-op since we can reach the branch with a 2-byte jmp. -- cgit v1.2.3 From b40b26ccfc31465363dbd3ff849bd84ec87fe9b7 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 12 Apr 2012 00:05:29 +0200 Subject: gma500: Don't needlessly include version.h in mdfld_dsi_output.h drivers/gpu/drm/gma500/mdfld_dsi_output.h does not need to '#include ' - so don't. Signed-off-by: Jesper Juhl Acked-by: Alan Cox Acked-by: Kirill A. Shutemov Signed-off-by: Jiri Kosina --- drivers/gpu/drm/gma500/mdfld_dsi_output.h | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.h b/drivers/gpu/drm/gma500/mdfld_dsi_output.h index 21071cef92a4..36eb0744841c 100644 --- a/drivers/gpu/drm/gma500/mdfld_dsi_output.h +++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.h @@ -29,7 +29,6 @@ #define __MDFLD_DSI_OUTPUT_H__ #include -#include #include #include #include -- cgit v1.2.3 From 6b2aac42b20f495d9ea220036f57596d525d4233 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sat, 14 Apr 2012 00:14:11 +0900 Subject: Fix typo in various Kconfig file Correct spelling typo in various Kconfig file. Signed-off-by: Masanari Iida Signed-off-by: Jiri Kosina --- arch/m68k/Kconfig.cpu | 2 +- arch/mips/Kconfig | 4 ++-- arch/mips/Kconfig.debug | 2 +- arch/openrisc/Kconfig | 2 +- arch/powerpc/platforms/Kconfig.cputype | 4 ++-- arch/powerpc/platforms/pseries/Kconfig | 2 +- arch/sh/Kconfig.cpu | 2 +- drivers/devfreq/Kconfig | 2 +- drivers/hid/Kconfig | 2 +- drivers/hwmon/Kconfig | 2 +- drivers/i2c/busses/Kconfig | 2 +- drivers/mfd/Kconfig | 6 +++--- drivers/ptp/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- drivers/xen/Kconfig | 2 +- 15 files changed, 19 insertions(+), 19 deletions(-) diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 8a9c767125a4..51b3274cbe71 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -7,7 +7,7 @@ choice help The Freescale (was Motorola) M68K family of processors implements the full 68000 processor instruction set. - The Freescale ColdFire family of processors is a modern derivitive + The Freescale ColdFire family of processors is a modern derivative of the 68000 processor family. They are mainly targeted at embedded applications, and are all System-On-Chip (SOC) devices, as opposed to stand alone CPUs. They implement a subset of the original 68000 diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ce30e2f91d77..923a6c3b9a0a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1001,12 +1001,12 @@ config HOLES_IN_ZONE bool # -# Endianess selection. Sufficiently obscure so many users don't know what to +# Endianness selection. Sufficiently obscure so many users don't know what to # answer,so we try hard to limit the available choices. Also the use of a # choice statement should be more obvious to the user. # choice - prompt "Endianess selection" + prompt "Endianness selection" help Some MIPS machines can be configured for either little or big endian byte order. These modes require different kernels and a different diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 83ed00a5644a..5a43aa0798ca 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -57,7 +57,7 @@ config CMDLINE options. config CMDLINE_OVERRIDE - bool "Built-in command line overrides firware arguments" + bool "Built-in command line overrides firmware arguments" default n depends on CMDLINE_BOOL help diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index a4787197d8fe..66dff2046987 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -141,7 +141,7 @@ config DEBUG_STACKOVERFLOW bool "Check for kernel stack overflow" default y help - Make extra checks for space avaliable on stack in some + Make extra checks for space available on stack in some critical functions. This will cause kernel to run a bit slower, but will catch most of kernel stack overruns and exit gracefuly. diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 425db18580a2..9c80fc07384a 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -258,7 +258,7 @@ config PPC_ICSWX_PID default y ---help--- The PID register in server is used explicitly for ICSWX. In - embedded systems PID managment is done by the system. + embedded systems PID management is done by the system. config PPC_ICSWX_USE_SIGILL bool "Should a bad CT cause a SIGILL?" @@ -266,7 +266,7 @@ config PPC_ICSWX_USE_SIGILL default n ---help--- Should a bad CT used for "non-record form ICSWX" cause an - illegal intruction signal or should it be silent as + illegal instruction signal or should it be silent as architected. If in doubt, say N here. diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index aadbe4f6d537..10ad207dccc2 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -67,7 +67,7 @@ config IO_EVENT_IRQ This option will only enable the IO event platform code. You will still need to enable or compile the actual drivers - that use this infrastruture to handle IO event interrupts. + that use this infrastructure to handle IO event interrupts. Say Y if you are unsure. diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu index ddf096c7d8bf..770ff2d5b94d 100644 --- a/arch/sh/Kconfig.cpu +++ b/arch/sh/Kconfig.cpu @@ -1,7 +1,7 @@ menu "Processor features" choice - prompt "Endianess selection" + prompt "Endianness selection" default CPU_LITTLE_ENDIAN help Some SuperH machines can be configured for either little or big diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 464fa2147dfb..f6b0a6e2ea50 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -16,7 +16,7 @@ menuconfig PM_DEVFREQ is attached to a single device and returns a "representative" clock frequency of the device, which is also attached to a device by 1-to-1. The device registering devfreq takes the - responsiblity to "interpret" the representative frequency and + responsibility to "interpret" the representative frequency and to set its every clock accordingly with the "target" callback given to devfreq. diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index a3d033252995..478eb4a90f2c 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -448,7 +448,7 @@ config HID_PICOLCD_FB select FB_SYS_FOPS ---help--- Provide access to PicoLCD's 256x64 monochrome display via a - frambuffer device. + framebuffer device. config HID_PICOLCD_BACKLIGHT bool "Backlight control" if EXPERT diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 8deedc1b9840..e466ecba8dc1 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -318,7 +318,7 @@ config SENSORS_EXYNOS4_TMU tristate "Temperature sensor on Samsung EXYNOS4" depends on ARCH_EXYNOS4 help - If you say yes here you get support for TMU (Thermal Managment + If you say yes here you get support for TMU (Thermal Management Unit) on SAMSUNG EXYNOS4 series of SoC. This driver can also be built as a module. If so, the module diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index d2c5095deeac..94468a64ce3a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -351,7 +351,7 @@ config I2C_DAVINCI For details please see http://www.ti.com/davinci config I2C_DESIGNWARE_PLATFORM - tristate "Synopsys DesignWare Platfrom" + tristate "Synopsys DesignWare Platform" depends on HAVE_CLK help If you say yes to this option, support will be included for the diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 29f463cc09cb..639e1fc36a39 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -407,7 +407,7 @@ config MFD_MAX8925 select MFD_CORE help Say yes here to support for Maxim Semiconductor MAX8925. This is - a Power Management IC. This driver provies common support for + a Power Management IC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. @@ -430,7 +430,7 @@ config MFD_MAX8998 help Say yes here to support for Maxim Semiconductor MAX8998 and National Semiconductor LP3974. This is a Power Management IC. - This driver provies common support for accessing the device, + This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. @@ -441,7 +441,7 @@ config MFD_S5M_CORE select REGMAP_I2C help Support for the Samsung Electronics S5M MFD series. - This driver provies common support for accessing the device, + This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig index cd9bc3b129bc..b4b918a75db2 100644 --- a/drivers/ptp/Kconfig +++ b/drivers/ptp/Kconfig @@ -70,7 +70,7 @@ config DP83640_PHY using the SO_TIMESTAMPING API. In order for this to work, your MAC driver must also - implement the skb_tx_timetamp() function. + implement the skb_tx_timestamp() function. config PTP_1588_CLOCK_PCH tristate "Intel PCH EG20T as PTP clock" diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 37096246c937..eeea76f4dccb 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -937,7 +937,7 @@ config BCM47XX_WDT tristate "Broadcom BCM47xx Watchdog Timer" depends on BCM47XX help - Hardware driver for the Broadcom BCM47xx Watchog Timer. + Hardware driver for the Broadcom BCM47xx Watchdog Timer. config RC32434_WDT tristate "IDT RC32434 SoC Watchdog Timer" diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 94243136f6bf..73f1c99bc540 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -71,7 +71,7 @@ config XEN_DEV_EVTCHN tristate "Xen /dev/xen/evtchn device" default y help - The evtchn driver allows a userspace process to triger event + The evtchn driver allows a userspace process to trigger event channels and to receive notification of an event channel firing. If in doubt, say yes. -- cgit v1.2.3 From 5b4285fbd4692928ed41992b9aba55c7d1efd723 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Sun, 1 Apr 2012 22:27:30 +0000 Subject: README: Use `X' and `x' consistently The text referred to `XX', when only a single `X' actually existed, so this commit changes it to just `X'; a similar change has been made for `xx'. Also, `N' was used when it would have been more consistent to use `X' again, so this commit replaces `N' with `X'. This commit also chooses to leave `X' as the placeholder for the current version of the source, and then makes `x' the placeholder for any version number; fortunately nothing really depends on this subtlety being understood. Because `x' is already being used when discussing version numbers, this commit changes such filename references as `xxx.rej' to `some-file-name.rej'. Signed-off-by: Michael Witten Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- README | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/README b/README index 0d5a7ddbe3ee..c03dc56e1872 100644 --- a/README +++ b/README @@ -68,7 +68,7 @@ INSTALLING the kernel source: bzip2 -dc linux-3.X.tar.bz2 | tar xvf - - Replace "XX" with the version number of the latest kernel. + Replace "X" with the version number of the latest kernel. Do NOT use the /usr/src/linux area! This area has a (usually incomplete) set of kernel headers that are used by the library header @@ -78,18 +78,18 @@ INSTALLING the kernel source: - You can also upgrade between 3.x releases by patching. Patches are distributed in the traditional gzip and the newer bzip2 format. To install by patching, get all the newer patch files, enter the - top level directory of the kernel source (linux-3.x) and execute: + top level directory of the kernel source (linux-3.X) and execute: gzip -cd ../patch-3.x.gz | patch -p1 or bzip2 -dc ../patch-3.x.bz2 | patch -p1 - (repeat xx for all versions bigger than the version of your current - source tree, _in_order_) and you should be ok. You may want to remove - the backup files (xxx~ or xxx.orig), and make sure that there are no - failed patches (xxx# or xxx.rej). If there are, either you or me has - made a mistake. + Replace "x" for all versions bigger than the version "X" of your current + source tree, _in_order_, and you should be ok. You may want to remove + the backup files (some-file-name~ or some-file-name.orig), and make sure + that there are no failed patches (some-file-name# or some-file-name.rej). + If there are, either you or me has made a mistake. Unlike patches for the 3.x kernels, patches for the 3.x.y kernels (also known as the -stable kernels) are not incremental but instead apply @@ -142,11 +142,11 @@ BUILD directory for the kernel: Using the option "make O=output/dir" allow you to specify an alternate place for the output files (including .config). Example: - kernel source code: /usr/src/linux-3.N + kernel source code: /usr/src/linux-3.X build directory: /home/name/build/kernel To configure and build the kernel use: - cd /usr/src/linux-3.N + cd /usr/src/linux-3.X make O=/home/name/build/kernel menuconfig make O=/home/name/build/kernel sudo make O=/home/name/build/kernel modules_install install -- cgit v1.2.3 From a20e3a795b1a1975f09f7f729ba2b6fc74f4a54a Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Tue, 3 Apr 2012 19:20:02 +0000 Subject: README: Grammar: `me has' -> `I have' Signed-off-by: Michael Witten Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README b/README index c03dc56e1872..15acb0a6ae67 100644 --- a/README +++ b/README @@ -89,7 +89,7 @@ INSTALLING the kernel source: source tree, _in_order_, and you should be ok. You may want to remove the backup files (some-file-name~ or some-file-name.orig), and make sure that there are no failed patches (some-file-name# or some-file-name.rej). - If there are, either you or me has made a mistake. + If there are, either you or I have made a mistake. Unlike patches for the 3.x kernels, patches for the 3.x.y kernels (also known as the -stable kernels) are not incremental but instead apply -- cgit v1.2.3 From a6144bb9e7b4c82f7366bd74f8beac826f5f6b7f Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 2 Apr 2012 00:31:33 +0000 Subject: README: Better comma usage For the most part, this commit simply introduces commas to offset modifiers. Signed-off-by: Michael Witten Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- README | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/README b/README index 15acb0a6ae67..9853cadec8cd 100644 --- a/README +++ b/README @@ -137,7 +137,7 @@ SOFTWARE REQUIREMENTS BUILD directory for the kernel: - When compiling the kernel all output files will per default be + When compiling the kernel, all output files will per default be stored together with the kernel source code. Using the option "make O=output/dir" allow you to specify an alternate place for the output files (including .config). @@ -145,13 +145,13 @@ BUILD directory for the kernel: kernel source code: /usr/src/linux-3.X build directory: /home/name/build/kernel - To configure and build the kernel use: + To configure and build the kernel, use: cd /usr/src/linux-3.X make O=/home/name/build/kernel menuconfig make O=/home/name/build/kernel sudo make O=/home/name/build/kernel modules_install install - Please note: If the 'O=output/dir' option is used then it must be + Please note: If the 'O=output/dir' option is used, then it must be used for all invocations of make. CONFIGURING the kernel: @@ -230,7 +230,7 @@ COMPILING the kernel: possible to do "make install" if you have lilo installed to suit the kernel makefiles, but you may want to check your particular lilo setup first. - To do the actual install you have to be root, but none of the normal + To do the actual install, you have to be root, but none of the normal build should require that. Don't take the name of root in vain. - If you configured any of the parts of the kernel as `modules', you @@ -238,7 +238,7 @@ COMPILING the kernel: - Verbose kernel compile/build output: - Normally the kernel build system runs in a fairly quiet mode (but not + Normally, the kernel build system runs in a fairly quiet mode (but not totally silent). However, sometimes you or other kernel developers need to see compile, link, or other commands exactly as they are executed. For this, use "verbose" build mode. This is done by inserting @@ -267,7 +267,7 @@ COMPILING the kernel: - Booting a kernel directly from a floppy without the assistance of a bootloader such as LILO, is no longer supported. - If you boot Linux from the hard drive, chances are you use LILO which + If you boot Linux from the hard drive, chances are you use LILO, which uses the kernel image as specified in the file /etc/lilo.conf. The kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or /boot/bzImage. To use the new kernel, save a copy of the old image @@ -320,7 +320,7 @@ IF SOMETHING GOES WRONG: incomprehensible to you, but it does contain information that may help debugging the problem. The text above the dump is also important: it tells something about why the kernel dumped code (in - the above example it's due to a bad kernel pointer). More information + the above example, it's due to a bad kernel pointer). More information on making sense of the dump is in Documentation/oops-tracing.txt - If you compiled the kernel with CONFIG_KALLSYMS you can send the dump @@ -328,7 +328,7 @@ IF SOMETHING GOES WRONG: sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred). This utility can be downloaded from ftp://ftp..kernel.org/pub/linux/utils/kernel/ksymoops/ . - Alternately you can do the dump lookup by hand: + Alternately, you can do the dump lookup by hand: - In debugging dumps like the above, it helps enormously if you can look up what the EIP value means. The hex value as such doesn't help -- cgit v1.2.3 From 6d12760c9f3d961a8bfc23ba9702d12f7eea35dd Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 2 Apr 2012 00:33:02 +0000 Subject: README: `Alternately' -> `Alternatively' Also, one `Alternate' was changed to `Alternative' for the sake of consistency. Signed-off-by: Michael Witten Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- README | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/README b/README index 9853cadec8cd..73e2c0c284dd 100644 --- a/README +++ b/README @@ -163,7 +163,7 @@ CONFIGURING the kernel: new version with minimal work, use "make oldconfig", which will only ask you for the answers to new questions. - - Alternate configuration commands are: + - Alternative configuration commands are: "make config" Plain text interface. "make menuconfig" Text based color menus, radiolists & dialogs. "make nconfig" Enhanced text based color menus. @@ -328,7 +328,7 @@ IF SOMETHING GOES WRONG: sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred). This utility can be downloaded from ftp://ftp..kernel.org/pub/linux/utils/kernel/ksymoops/ . - Alternately, you can do the dump lookup by hand: + Alternatively, you can do the dump lookup by hand: - In debugging dumps like the above, it helps enormously if you can look up what the EIP value means. The hex value as such doesn't help @@ -361,7 +361,7 @@ IF SOMETHING GOES WRONG: kernel image or similar), telling me as much about your setup as possible will help. Please read the REPORTING-BUGS document for details. - - Alternately, you can use gdb on a running kernel. (read-only; i.e. you + - Alternatively, you can use gdb on a running kernel. (read-only; i.e. you cannot change values or set break points.) To do this, first compile the kernel with -g; edit arch/i386/Makefile appropriately, then do a "make clean". You'll also need to enable CONFIG_PROC_FS (via "make config"). -- cgit v1.2.3 From 88f7a642cf0d6bdfa789593ba2b019ca940a3a72 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 2 Apr 2012 00:46:58 +0000 Subject: README: More consistent and readable white space Mainly, this just separates paragraphs, so that the text is easier on the eyes. Signed-off-by: Michael Witten Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- README | 41 +++++++++++++++++++++++++++++++---------- 1 file changed, 31 insertions(+), 10 deletions(-) diff --git a/README b/README index 73e2c0c284dd..e6f94a636b59 100644 --- a/README +++ b/README @@ -65,8 +65,8 @@ INSTALLING the kernel source: gzip -cd linux-3.X.tar.gz | tar xvf - or - bzip2 -dc linux-3.X.tar.bz2 | tar xvf - + bzip2 -dc linux-3.X.tar.bz2 | tar xvf - Replace "X" with the version number of the latest kernel. @@ -83,6 +83,7 @@ INSTALLING the kernel source: gzip -cd ../patch-3.x.gz | patch -p1 or + bzip2 -dc ../patch-3.x.bz2 | patch -p1 Replace "x" for all versions bigger than the version "X" of your current @@ -142,14 +143,16 @@ BUILD directory for the kernel: Using the option "make O=output/dir" allow you to specify an alternate place for the output files (including .config). Example: + kernel source code: /usr/src/linux-3.X build directory: /home/name/build/kernel To configure and build the kernel, use: - cd /usr/src/linux-3.X - make O=/home/name/build/kernel menuconfig - make O=/home/name/build/kernel - sudo make O=/home/name/build/kernel modules_install install + + cd /usr/src/linux-3.X + make O=/home/name/build/kernel menuconfig + make O=/home/name/build/kernel + sudo make O=/home/name/build/kernel modules_install install Please note: If the 'O=output/dir' option is used, then it must be used for all invocations of make. @@ -164,36 +167,49 @@ CONFIGURING the kernel: only ask you for the answers to new questions. - Alternative configuration commands are: + "make config" Plain text interface. + "make menuconfig" Text based color menus, radiolists & dialogs. + "make nconfig" Enhanced text based color menus. + "make xconfig" X windows (Qt) based configuration tool. + "make gconfig" X windows (Gtk) based configuration tool. + "make oldconfig" Default all questions based on the contents of your existing ./.config file and asking about new config symbols. + "make silentoldconfig" Like above, but avoids cluttering the screen with questions already answered. Additionally updates the dependencies. + "make defconfig" Create a ./.config file by using the default symbol values from either arch/$ARCH/defconfig or arch/$ARCH/configs/${PLATFORM}_defconfig, depending on the architecture. + "make ${PLATFORM}_defconfig" - Create a ./.config file by using the default - symbol values from - arch/$ARCH/configs/${PLATFORM}_defconfig. - Use "make help" to get a list of all available - platforms of your architecture. + Create a ./.config file by using the default + symbol values from + arch/$ARCH/configs/${PLATFORM}_defconfig. + Use "make help" to get a list of all available + platforms of your architecture. + "make allyesconfig" Create a ./.config file by setting symbol values to 'y' as much as possible. + "make allmodconfig" Create a ./.config file by setting symbol values to 'm' as much as possible. + "make allnoconfig" Create a ./.config file by setting symbol values to 'n' as much as possible. + "make randconfig" Create a ./.config file by setting symbol values to random values. @@ -201,17 +217,21 @@ CONFIGURING the kernel: in Documentation/kbuild/kconfig.txt. NOTES on "make config": + - having unnecessary drivers will make the kernel bigger, and can under some circumstances lead to problems: probing for a nonexistent controller card may confuse your other controllers + - compiling the kernel with "Processor type" set higher than 386 will result in a kernel that does NOT work on a 386. The kernel will detect this on bootup, and give up. + - A kernel with math-emulation compiled in will still use the coprocessor if one is present: the math emulation will just never get used in that case. The kernel will be slightly larger, but will work on different machines regardless of whether they have a math coprocessor or not. + - the "kernel hacking" configuration details usually result in a bigger or slower kernel (or both), and can even make the kernel less stable by configuring some routines to actively try to @@ -256,6 +276,7 @@ COMPILING the kernel: are installing a new kernel with the same version number as your working kernel, make a backup of your modules directory before you do a "make modules_install". + Alternatively, before compiling, use the kernel config option "LOCALVERSION" to append a unique suffix to the regular kernel version. LOCALVERSION can be set in the "General Setup" menu. -- cgit v1.2.3 From c072c3f0e14f7ae3172771e98e24e2e0741e5daa Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 2 Apr 2012 00:49:02 +0000 Subject: README: Capitalize start of sentence Signed-off-by: Michael Witten Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- README | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/README b/README index e6f94a636b59..50aa430995b3 100644 --- a/README +++ b/README @@ -218,11 +218,11 @@ CONFIGURING the kernel: NOTES on "make config": - - having unnecessary drivers will make the kernel bigger, and can + - Having unnecessary drivers will make the kernel bigger, and can under some circumstances lead to problems: probing for a nonexistent controller card may confuse your other controllers - - compiling the kernel with "Processor type" set higher than 386 + - Compiling the kernel with "Processor type" set higher than 386 will result in a kernel that does NOT work on a 386. The kernel will detect this on bootup, and give up. @@ -232,7 +232,7 @@ CONFIGURING the kernel: but will work on different machines regardless of whether they have a math coprocessor or not. - - the "kernel hacking" configuration details usually result in a + - The "kernel hacking" configuration details usually result in a bigger or slower kernel (or both), and can even make the kernel less stable by configuring some routines to actively try to break bad code to find kernel problems (kmalloc()). Thus you -- cgit v1.2.3 From 7f65e924c0cfe0896e31ce3e162b4d10df87ccfe Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 2 Apr 2012 00:53:29 +0000 Subject: README: Consolidate discussions of -stable patches The nature of the patches for the -stable kernels was discussed twice; this commit consolidates those discussions into one paragraph. Signed-off-by: Michael Witten Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- README | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/README b/README index 50aa430995b3..7333d2b58110 100644 --- a/README +++ b/README @@ -94,8 +94,12 @@ INSTALLING the kernel source: Unlike patches for the 3.x kernels, patches for the 3.x.y kernels (also known as the -stable kernels) are not incremental but instead apply - directly to the base 3.x kernel. Please read - Documentation/applying-patches.txt for more information. + directly to the base 3.x kernel. For example, if your base kernel is 3.0 + and you want to apply the 3.0.3 patch, you must not first apply the 3.0.1 + and 3.0.2 patches. Similarly, if you are running kernel version 3.0.2 and + want to jump to 3.0.3, you must first reverse the 3.0.2 patch (that is, + patch -R) _before_ applying the 3.0.3 patch. You can read more on this in + Documentation/applying-patches.txt Alternatively, the script patch-kernel can be used to automate this process. It determines the current kernel version and applies any @@ -107,17 +111,6 @@ INSTALLING the kernel source: kernel source. Patches are applied from the current directory, but an alternative directory can be specified as the second argument. - - If you are upgrading between releases using the stable series patches - (for example, patch-3.x.y), note that these "dot-releases" are - not incremental and must be applied to the 3.x base tree. For - example, if your base kernel is 3.0 and you want to apply the - 3.0.3 patch, you do not and indeed must not first apply the - 3.0.1 and 3.0.2 patches. Similarly, if you are running kernel - version 3.0.2 and want to jump to 3.0.3, you must first - reverse the 3.0.2 patch (that is, patch -R) _before_ applying - the 3.0.3 patch. - You can read more on this in Documentation/applying-patches.txt - - Make sure you have no stale .o files and dependencies lying around: cd linux -- cgit v1.2.3 From 3773b4540721a2e8d4b957f4619ada4bf0bc8e45 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 2 Apr 2012 01:07:52 +0000 Subject: README: Remove sporadic tabs Indentation was already done mainly with spaces, so this commit removes the tabs and makes some of the whitespace more consistent. Signed-off-by: Michael Witten Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- README | 140 ++++++++++++++++++++++++++++++++--------------------------------- 1 file changed, 70 insertions(+), 70 deletions(-) diff --git a/README b/README index 7333d2b58110..9beaed0ed620 100644 --- a/README +++ b/README @@ -1,4 +1,4 @@ - Linux kernel release 3.x + Linux kernel release 3.x These are the release notes for Linux version 3. Read them carefully, as they tell you what this is all about, explain how to install the @@ -62,11 +62,11 @@ INSTALLING the kernel source: directory where you have permissions (eg. your home directory) and unpack it: - gzip -cd linux-3.X.tar.gz | tar xvf - + gzip -cd linux-3.X.tar.gz | tar xvf - or - bzip2 -dc linux-3.X.tar.bz2 | tar xvf - + bzip2 -dc linux-3.X.tar.bz2 | tar xvf - Replace "X" with the version number of the latest kernel. @@ -80,11 +80,11 @@ INSTALLING the kernel source: install by patching, get all the newer patch files, enter the top level directory of the kernel source (linux-3.X) and execute: - gzip -cd ../patch-3.x.gz | patch -p1 + gzip -cd ../patch-3.x.gz | patch -p1 or - bzip2 -dc ../patch-3.x.bz2 | patch -p1 + bzip2 -dc ../patch-3.x.bz2 | patch -p1 Replace "x" for all versions bigger than the version "X" of your current source tree, _in_order_, and you should be ok. You may want to remove @@ -105,7 +105,7 @@ INSTALLING the kernel source: process. It determines the current kernel version and applies any patches found. - linux/scripts/patch-kernel linux + linux/scripts/patch-kernel linux The first argument in the command above is the location of the kernel source. Patches are applied from the current directory, but @@ -113,8 +113,8 @@ INSTALLING the kernel source: - Make sure you have no stale .o files and dependencies lying around: - cd linux - make mrproper + cd linux + make mrproper You should now have the sources correctly installed. @@ -137,8 +137,8 @@ BUILD directory for the kernel: place for the output files (including .config). Example: - kernel source code: /usr/src/linux-3.X - build directory: /home/name/build/kernel + kernel source code: /usr/src/linux-3.X + build directory: /home/name/build/kernel To configure and build the kernel, use: @@ -161,76 +161,76 @@ CONFIGURING the kernel: - Alternative configuration commands are: - "make config" Plain text interface. + "make config" Plain text interface. - "make menuconfig" Text based color menus, radiolists & dialogs. + "make menuconfig" Text based color menus, radiolists & dialogs. - "make nconfig" Enhanced text based color menus. + "make nconfig" Enhanced text based color menus. - "make xconfig" X windows (Qt) based configuration tool. + "make xconfig" X windows (Qt) based configuration tool. - "make gconfig" X windows (Gtk) based configuration tool. + "make gconfig" X windows (Gtk) based configuration tool. - "make oldconfig" Default all questions based on the contents of - your existing ./.config file and asking about - new config symbols. + "make oldconfig" Default all questions based on the contents of + your existing ./.config file and asking about + new config symbols. - "make silentoldconfig" - Like above, but avoids cluttering the screen - with questions already answered. - Additionally updates the dependencies. + "make silentoldconfig" + Like above, but avoids cluttering the screen + with questions already answered. + Additionally updates the dependencies. - "make defconfig" Create a ./.config file by using the default - symbol values from either arch/$ARCH/defconfig - or arch/$ARCH/configs/${PLATFORM}_defconfig, - depending on the architecture. + "make defconfig" Create a ./.config file by using the default + symbol values from either arch/$ARCH/defconfig + or arch/$ARCH/configs/${PLATFORM}_defconfig, + depending on the architecture. - "make ${PLATFORM}_defconfig" - Create a ./.config file by using the default - symbol values from - arch/$ARCH/configs/${PLATFORM}_defconfig. - Use "make help" to get a list of all available - platforms of your architecture. + "make ${PLATFORM}_defconfig" + Create a ./.config file by using the default + symbol values from + arch/$ARCH/configs/${PLATFORM}_defconfig. + Use "make help" to get a list of all available + platforms of your architecture. - "make allyesconfig" - Create a ./.config file by setting symbol - values to 'y' as much as possible. + "make allyesconfig" + Create a ./.config file by setting symbol + values to 'y' as much as possible. - "make allmodconfig" - Create a ./.config file by setting symbol - values to 'm' as much as possible. + "make allmodconfig" + Create a ./.config file by setting symbol + values to 'm' as much as possible. - "make allnoconfig" Create a ./.config file by setting symbol - values to 'n' as much as possible. + "make allnoconfig" Create a ./.config file by setting symbol + values to 'n' as much as possible. - "make randconfig" Create a ./.config file by setting symbol - values to random values. + "make randconfig" Create a ./.config file by setting symbol + values to random values. You can find more information on using the Linux kernel config tools in Documentation/kbuild/kconfig.txt. - NOTES on "make config": + - NOTES on "make config": - - Having unnecessary drivers will make the kernel bigger, and can - under some circumstances lead to problems: probing for a - nonexistent controller card may confuse your other controllers + - Having unnecessary drivers will make the kernel bigger, and can + under some circumstances lead to problems: probing for a + nonexistent controller card may confuse your other controllers - - Compiling the kernel with "Processor type" set higher than 386 - will result in a kernel that does NOT work on a 386. The - kernel will detect this on bootup, and give up. + - Compiling the kernel with "Processor type" set higher than 386 + will result in a kernel that does NOT work on a 386. The + kernel will detect this on bootup, and give up. - - A kernel with math-emulation compiled in will still use the - coprocessor if one is present: the math emulation will just - never get used in that case. The kernel will be slightly larger, - but will work on different machines regardless of whether they - have a math coprocessor or not. + - A kernel with math-emulation compiled in will still use the + coprocessor if one is present: the math emulation will just + never get used in that case. The kernel will be slightly larger, + but will work on different machines regardless of whether they + have a math coprocessor or not. - - The "kernel hacking" configuration details usually result in a - bigger or slower kernel (or both), and can even make the kernel - less stable by configuring some routines to actively try to - break bad code to find kernel problems (kmalloc()). Thus you - should probably answer 'n' to the questions for - "development", "experimental", or "debugging" features. + - The "kernel hacking" configuration details usually result in a + bigger or slower kernel (or both), and can even make the kernel + less stable by configuring some routines to actively try to + break bad code to find kernel problems (kmalloc()). Thus you + should probably answer 'n' to the questions for "development", + "experimental", or "debugging" features. COMPILING the kernel: @@ -257,7 +257,7 @@ COMPILING the kernel: For this, use "verbose" build mode. This is done by inserting "V=1" in the "make" command. E.g.: - make V=1 all + make V=1 all To have the build system also tell the reason for the rebuild of each target, use "V=2". The default is "V=0". @@ -320,14 +320,14 @@ IF SOMETHING GOES WRONG: - If the bug results in a message like - unable to handle kernel paging request at address C0000010 - Oops: 0002 - EIP: 0010:XXXXXXXX - eax: xxxxxxxx ebx: xxxxxxxx ecx: xxxxxxxx edx: xxxxxxxx - esi: xxxxxxxx edi: xxxxxxxx ebp: xxxxxxxx - ds: xxxx es: xxxx fs: xxxx gs: xxxx - Pid: xx, process nr: xx - xx xx xx xx xx xx xx xx xx xx + unable to handle kernel paging request at address C0000010 + Oops: 0002 + EIP: 0010:XXXXXXXX + eax: xxxxxxxx ebx: xxxxxxxx ecx: xxxxxxxx edx: xxxxxxxx + esi: xxxxxxxx edi: xxxxxxxx ebp: xxxxxxxx + ds: xxxx es: xxxx fs: xxxx gs: xxxx + Pid: xx, process nr: xx + xx xx xx xx xx xx xx xx xx xx or similar kernel debugging information on your screen or in your system log, please duplicate it *exactly*. The dump may look @@ -356,7 +356,7 @@ IF SOMETHING GOES WRONG: the file 'linux/vmlinux'. To extract the namelist and match it against the EIP from the kernel crash, do: - nm vmlinux | sort | less + nm vmlinux | sort | less This will give you a list of kernel addresses sorted in ascending order, from which it is simple to find the function that contains the -- cgit v1.2.3 From 59bf896406471ac49d124b3e5f4edcafe28e5360 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Wed, 18 Apr 2012 00:01:21 +0900 Subject: Fix "the the" in various Kconfig Fix typo "the the" in various Kconfig. Signed-off-by: Masanari Iida Signed-off-by: Jiri Kosina --- arch/arm/Kconfig | 4 ++-- arch/arm/mach-s3c64xx/Kconfig | 4 ++-- arch/blackfin/Kconfig | 2 +- drivers/iommu/Kconfig | 4 ++-- drivers/net/can/sja1000/Kconfig | 2 +- drivers/net/irda/Kconfig | 2 +- kernel/trace/Kconfig | 2 +- sound/soc/imx/Kconfig | 2 +- 8 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cf006d40342c..73f90dd5554b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1927,10 +1927,10 @@ choice default ZBOOT_ROM_NONE help Include experimental SD/MMC loading code in the ROM-able zImage. - With this enabled it is possible to write the the ROM-able zImage + With this enabled it is possible to write the ROM-able zImage kernel image to an MMC or SD card and boot the kernel straight from the reset vector. At reset the processor Mask ROM will load - the first part of the the ROM-able zImage which in turn loads the + the first part of the ROM-able zImage which in turn loads the rest the kernel image to RAM. config ZBOOT_ROM_NONE diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 82c0915729ee..06ca1cd4cae2 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -210,7 +210,7 @@ config SMDK6410_WM1190_EV1 and audio daughtercard for the Samsung SMDK6410 reference platform. Enabling this option will build support for this module into the kernel. The presence of the module will be - detected at runtime so the the resulting kernel can be used + detected at runtime so the resulting kernel can be used with or without the 1190-EV1 fitted. config SMDK6410_WM1192_EV1 @@ -226,7 +226,7 @@ config SMDK6410_WM1192_EV1 daughtercard for the Samsung SMDK6410 reference platform. Enabling this option will build support for this module into the kernel. The presence of the daughtercard will be - detected at runtime so the the resulting kernel can be used + detected at runtime so the resulting kernel can be used with or without the 1192-EV1 fitted. config MACH_NCP diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 373a6902d8fa..b83e89ced988 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1258,7 +1258,7 @@ config PM_BFIN_WAKE_GP (all processors, except ADSP-BF549). This option sets the general-purpose wake-up enable (GPWE) control bit to enable wake-up upon detection of an active low signal on the /GPW (PH7) pin. - On ADSP-BF549 this option enables the the same functionality on the + On ADSP-BF549 this option enables the same functionality on the /MRXON pin also PH7. endmenu diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index 3bd9fff5c589..c69843742bb0 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -43,7 +43,7 @@ config AMD_IOMMU With this option you can enable support for AMD IOMMU hardware in your system. An IOMMU is a hardware component which provides remapping of DMA memory accesses from devices. With an AMD IOMMU you - can isolate the the DMA memory of different devices and protect the + can isolate the DMA memory of different devices and protect the system from misbehaving device drivers or hardware. You can find out if your system has an AMD IOMMU if you look into @@ -67,7 +67,7 @@ config AMD_IOMMU_V2 ---help--- This option enables support for the AMD IOMMUv2 features of the IOMMU hardware. Select this option if you want to use devices that support - the the PCI PRI and PASID interface. + the PCI PRI and PASID interface. # Intel IOMMU support config DMAR_TABLE diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index b60d6c5f29a0..03df9a8f2bbf 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -75,7 +75,7 @@ config CAN_KVASER_PCI tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" depends on PCI ---help--- - This driver is for the the PCIcanx and PCIcan cards (1, 2 or + This driver is for the PCIcanx and PCIcan cards (1, 2 or 4 channel) from Kvaser (http://www.kvaser.com). config CAN_PLX_PCI diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 468047866c8c..1b6d5c03edfa 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -316,7 +316,7 @@ config AU1000_FIR tristate "Alchemy IrDA SIR/FIR" depends on IRDA && MIPS_ALCHEMY help - Say Y/M here to build suppor the the IrDA peripheral on the + Say Y/M here to build support the IrDA peripheral on the Alchemy Au1000 and Au1100 SoCs. Say M to build a module; it will be called au1k_ir.ko diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index a1d2849f2473..33f768b779c9 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -272,7 +272,7 @@ config PROFILE_ANNOTATED_BRANCHES bool "Trace likely/unlikely profiler" select TRACE_BRANCH_PROFILING help - This tracer profiles all the the likely and unlikely macros + This tracer profiles all likely and unlikely macros in the kernel. It will display the results in: /sys/kernel/debug/tracing/trace_stat/branch_annotated diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig index 810acaa09009..d83e5d0b5d52 100644 --- a/sound/soc/imx/Kconfig +++ b/sound/soc/imx/Kconfig @@ -28,7 +28,7 @@ config SND_SOC_IMX_AUDMUX tristate config SND_MXC_SOC_WM1133_EV1 - tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted" + tristate "Audio on the i.MX31ADS with WM1133-EV1 fitted" depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL select SND_SOC_WM8350 select SND_MXC_SOC_FIQ -- cgit v1.2.3 From 42a6bd2006c922143cee8d9ec7c4e27526d4d2a3 Mon Sep 17 00:00:00 2001 From: Kusanagi Kouichi Date: Sun, 1 Apr 2012 17:29:32 +0900 Subject: x86, relocs: Remove an unused variable sh_symtab is set but not used. Signed-off-by: Kusanagi Kouichi Signed-off-by: Jiri Kosina --- arch/x86/boot/compressed/relocs.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c index d3c0b0277666..fb7117a4ade1 100644 --- a/arch/x86/boot/compressed/relocs.c +++ b/arch/x86/boot/compressed/relocs.c @@ -403,13 +403,11 @@ static void print_absolute_symbols(void) for (i = 0; i < ehdr.e_shnum; i++) { struct section *sec = &secs[i]; char *sym_strtab; - Elf32_Sym *sh_symtab; int j; if (sec->shdr.sh_type != SHT_SYMTAB) { continue; } - sh_symtab = sec->symtab; sym_strtab = sec->link->strtab; for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) { Elf32_Sym *sym; -- cgit v1.2.3 From c69a6ca1a4e398e7e85cab792ddbd874d9335233 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 9 Apr 2012 22:49:57 +0200 Subject: radeon_cp: Remove unneeded tests for NULL before calling release_firmware() release_firmware() does its own tests for NULL pointers so there's no need to explicitly test before calling it. Signed-off-by: Jesper Juhl Signed-off-by: Jiri Kosina --- drivers/gpu/drm/radeon/radeon_cp.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 0ebb7d4796fa..ef67e181377b 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -1827,14 +1827,10 @@ void radeon_do_release(struct drm_device * dev) r600_do_cleanup_cp(dev); else radeon_do_cleanup_cp(dev); - if (dev_priv->me_fw) { - release_firmware(dev_priv->me_fw); - dev_priv->me_fw = NULL; - } - if (dev_priv->pfp_fw) { - release_firmware(dev_priv->pfp_fw); - dev_priv->pfp_fw = NULL; - } + release_firmware(dev_priv->me_fw); + dev_priv->me_fw = NULL; + release_firmware(dev_priv->pfp_fw); + dev_priv->pfp_fw = NULL; } } -- cgit v1.2.3 From b2cbf2e31bd26abaddcb1ce4cefb09e025247d52 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 9 Apr 2012 22:50:10 +0200 Subject: typhoon: get rid of redundant conditional before all to release_firmware() There's no need to test for a NULL pointer before calling release_firmware() since the function does that check itself, so remove the redundant test. Signed-off-by: Jesper Juhl Acked-by: David Dillow Signed-off-by: Jiri Kosina --- drivers/net/ethernet/3com/typhoon.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/3com/typhoon.c b/drivers/net/ethernet/3com/typhoon.c index 1234a14b2b73..b15366635147 100644 --- a/drivers/net/ethernet/3com/typhoon.c +++ b/drivers/net/ethernet/3com/typhoon.c @@ -2549,8 +2549,7 @@ typhoon_init(void) static void __exit typhoon_cleanup(void) { - if (typhoon_fw) - release_firmware(typhoon_fw); + release_firmware(typhoon_fw); pci_unregister_driver(&typhoon_driver); } -- cgit v1.2.3 From e3c5530b96b9c5994cfb2544a037161790c4f7c3 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 9 Apr 2012 22:50:15 +0200 Subject: tg3: remove redundant NULL test before release_firmware() call There is no need to test for a NULL pointer before calling release_firmware - the function does that on its own. Signed-off-by: Jesper Juhl Signed-off-by: Jiri Kosina --- drivers/net/ethernet/broadcom/tg3.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 062ac333fde6..9fbf73e41e30 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -15842,8 +15842,7 @@ static void __devexit tg3_remove_one(struct pci_dev *pdev) if (dev) { struct tg3 *tp = netdev_priv(dev); - if (tp->fw) - release_firmware(tp->fw); + release_firmware(tp->fw); tg3_reset_task_cancel(tp); -- cgit v1.2.3 From 294ca868ed598519cab1cd699873378d46733198 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 9 Apr 2012 22:50:24 +0200 Subject: bna: remove redundant NULL test before release_firmware() release_firmware() does its own NULL test so explicit test before call is unneeded. Signed-off-by: Jesper Juhl Acked-by: Rasesh Mody Signed-off-by: Jiri Kosina --- drivers/net/ethernet/brocade/bna/bnad.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c index ff78f770dec9..d86390cc033e 100644 --- a/drivers/net/ethernet/brocade/bna/bnad.c +++ b/drivers/net/ethernet/brocade/bna/bnad.c @@ -3546,9 +3546,7 @@ static void __exit bnad_module_exit(void) { pci_unregister_driver(&bnad_pci_driver); - - if (bfi_fw) - release_firmware(bfi_fw); + release_firmware(bfi_fw); } module_init(bnad_module_init); -- cgit v1.2.3 From 62baaf34dd6cbd3bb5357972789edd2d7d70c206 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 9 Apr 2012 22:50:31 +0200 Subject: qlogic: get rid of a redundant test for NULL before call to release_firmware() Since release_firmware() deals gracefully with being passed a NULL pointer there is no reason to test explicitly before calling the function. Signed-off-by: Jesper Juhl Signed-off-by: Jiri Kosina --- drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c | 3 +-- drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c index 718b27440351..1fb149c9b301 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c @@ -1261,8 +1261,7 @@ next: void netxen_release_firmware(struct netxen_adapter *adapter) { - if (adapter->fw) - release_firmware(adapter->fw); + release_firmware(adapter->fw); adapter->fw = NULL; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c index d32cf0ddf1b9..799fd40ed03a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c @@ -1321,8 +1321,7 @@ next: void qlcnic_release_firmware(struct qlcnic_adapter *adapter) { - if (adapter->fw) - release_firmware(adapter->fw); + release_firmware(adapter->fw); adapter->fw = NULL; } -- cgit v1.2.3 From 53c0ad522e215251f55623e80b921129aafa0d48 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 9 Apr 2012 22:50:42 +0200 Subject: tehuti: delete redundant NULL check before release_firmware() release_firmware() checks for NULL pointers - no need to test before the call. Signed-off-by: Jesper Juhl Signed-off-by: Andy Gospodarek Signed-off-by: Jiri Kosina --- drivers/net/ethernet/tehuti/tehuti.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c index ad973ffc9ff3..a445e777f086 100644 --- a/drivers/net/ethernet/tehuti/tehuti.c +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -341,8 +341,8 @@ static int bdx_fw_load(struct bdx_priv *priv) out: if (master) WRITE_REG(priv, regINIT_SEMAPHORE, 1); - if (fw) - release_firmware(fw); + + release_firmware(fw); if (rc) { netdev_err(priv->ndev, "firmware loading failed\n"); -- cgit v1.2.3 From ee51f4432e375d07c29758e592c8c1ad1a343208 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 9 Apr 2012 22:51:30 +0200 Subject: aic94xx: Get rid of redundant NULL check before release_firmware() call release_firmware() checks for NULL pointers internally, so checking before calling the function is redundant. Signed-off-by: Jesper Juhl Signed-off-by: Jiri Kosina --- drivers/scsi/aic94xx/aic94xx_seq.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c index 390168f62a13..5fdca93892ad 100644 --- a/drivers/scsi/aic94xx/aic94xx_seq.c +++ b/drivers/scsi/aic94xx/aic94xx_seq.c @@ -1228,8 +1228,7 @@ static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq) int asd_release_firmware(void) { - if (sequencer_fw) - release_firmware(sequencer_fw); + release_firmware(sequencer_fw); return 0; } -- cgit v1.2.3 From cf92549f1c95e0b1fd980828c35416dc2e548d2b Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 9 Apr 2012 22:51:41 +0200 Subject: qla2xxx: Remove redundant NULL check before release_firmware() call. release_firmware() checks for NULL pointers internally so checking before calling it is redundant. Signed-off-by: Jesper Juhl Acked-by: Chad Dupuis Signed-off-by: Jiri Kosina --- drivers/scsi/qla2xxx/qla_os.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index a2f999273a5f..91b6fe6000eb 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -4106,8 +4106,7 @@ qla2x00_release_firmware(void) mutex_lock(&qla_fw_lock); for (idx = 0; idx < FW_BLOBS; idx++) - if (qla_fw_blobs[idx].fw) - release_firmware(qla_fw_blobs[idx].fw); + release_firmware(qla_fw_blobs[idx].fw); mutex_unlock(&qla_fw_lock); } -- cgit v1.2.3 From 3cc6e78777ae6f577b67e26c76577ef357ac9009 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 9 Apr 2012 22:51:25 +0200 Subject: remoteproc: remove redundant NULL check before release_firmware() release_firmware deals gracefully with NULL pointers, so checking first is redundant. Signed-off-by: Jesper Juhl Signed-off-by: Jiri Kosina --- drivers/remoteproc/remoteproc_core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index ee15c68fb519..3d2884b0a4fc 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -1105,8 +1105,7 @@ static void rproc_fw_config_virtio(const struct firmware *fw, void *context) goto out; out: - if (fw) - release_firmware(fw); + release_firmware(fw); /* allow rproc_unregister() contexts, if any, to proceed */ complete_all(&rproc->firmware_loading_complete); } -- cgit v1.2.3 From 90449e5dee4800721a352af11ae4d65d4a56ba93 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 9 Apr 2012 22:51:36 +0200 Subject: qla1280: Remove redundant NULL check before release_firmware() call release_firmware() checks for NULL pointers internally so checking before calling the function is redundant. Signed-off-by: Jesper Juhl Signed-off-by: Jiri Kosina --- drivers/scsi/qla1280.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 6c6486f626ee..538230be5cca 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -4473,17 +4473,14 @@ qla1280_exit(void) pci_unregister_driver(&qla1280_pci_driver); /* release any allocated firmware images */ for (i = 0; i < QL_NUM_FW_IMAGES; i++) { - if (qla1280_fw_tbl[i].fw) { - release_firmware(qla1280_fw_tbl[i].fw); - qla1280_fw_tbl[i].fw = NULL; - } + release_firmware(qla1280_fw_tbl[i].fw); + qla1280_fw_tbl[i].fw = NULL; } } module_init(qla1280_init); module_exit(qla1280_exit); - MODULE_AUTHOR("Qlogic & Jes Sorensen"); MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 15ed103a98008d85f20956e0e29c2cae78051efe Mon Sep 17 00:00:00 2001 From: David Mackey Date: Tue, 17 Apr 2012 11:30:52 -0700 Subject: edac: Fix spelling errors. Signed-off-by: David Mackey Signed-off-by: Vinson Lee Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- drivers/edac/edac_core.h | 6 +++--- drivers/edac/edac_device.c | 10 +++++----- drivers/edac/i7core_edac.c | 10 +++++----- drivers/edac/sb_edac.c | 6 +++--- 4 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index e48ab3108ad8..841bb2d7ce61 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -107,13 +107,13 @@ extern int edac_debug_level; * * CPU caches (L1 and L2) * DMA engines - * Core CPU swithces + * Core CPU switches * Fabric switch units * PCIe interface controllers * other EDAC/ECC type devices that can be monitored for * errors, etc. * - * It allows for a 2 level set of hiearchry. For example: + * It allows for a 2 level set of hierarchy. For example: * * cache could be composed of L1, L2 and L3 levels of cache. * Each CPU core would have its own L1 cache, while sharing @@ -460,7 +460,7 @@ extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, /* * The no info errors are used when error overflows are reported. * There are a limited number of error logging registers that can - * be exausted. When all registers are exhausted and an additional + * be exhausted. When all registers are exhausted and an additional * error occurs then an error overflow register records that an * error occurred and the type of error, but doesn't have any * further information. The ce/ue versions make for cleaner diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c index 4b154593343a..da4a1f11939f 100644 --- a/drivers/edac/edac_device.c +++ b/drivers/edac/edac_device.c @@ -56,7 +56,7 @@ static void edac_device_dump_device(struct edac_device_ctl_info *edac_dev) * * The control structure is allocated in complete chunk * from the OS. It is in turn sub allocated to the - * various objects that compose the struture + * various objects that compose the structure * * The structure has a 'nr_instance' array within itself. * Each instance represents a major component @@ -118,7 +118,7 @@ struct edac_device_ctl_info *edac_device_alloc_ctl_info( /* Calc the 'end' offset past the attributes array */ pvt = edac_align_ptr(&dev_attrib[count], sz_private); } else { - /* no attribute array specificed */ + /* no attribute array specified */ pvt = edac_align_ptr(dev_attrib, sz_private); } @@ -367,7 +367,7 @@ static void del_edac_device_from_global_list(struct edac_device_ctl_info * structure, that needs to be polled for possible error events. * * This operation is to acquire the list mutex lock - * (thus preventing insertation or deletion) + * (thus preventing insertion or deletion) * and then call the device's poll function IFF this device is * running polled and there is a poll function defined. */ @@ -394,7 +394,7 @@ static void edac_device_workq_function(struct work_struct *work_req) /* Reschedule the workq for the next time period to start again * if the number of msec is for 1 sec, then adjust to the next - * whole one second to save timers fireing all over the period + * whole one second to save timers firing all over the period * between integral seconds */ if (edac_dev->poll_msec == 1000) @@ -563,7 +563,7 @@ EXPORT_SYMBOL_GPL(edac_device_add_device); * Remove sysfs entries for specified edac_device structure and * then remove edac_device structure from global list * - * @pdev: + * @dev: * Pointer to 'struct device' representing edac_device * structure to remove. * diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index 85226ccf5290..7f1dfcc4e597 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -90,7 +90,7 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices"); #define MC_MAX_DOD 0x64 /* - * OFFSETS for Device 3 Function 4, as inicated on Xeon 5500 datasheet: + * OFFSETS for Device 3 Function 4, as indicated on Xeon 5500 datasheet: * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf */ @@ -101,7 +101,7 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices"); #define DIMM1_COR_ERR(r) (((r) >> 16) & 0x7fff) #define DIMM0_COR_ERR(r) ((r) & 0x7fff) -/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */ +/* OFFSETS for Device 3 Function 2, as indicated on Xeon 5500 datasheet */ #define MC_SSRCONTROL 0x48 #define SSR_MODE_DISABLE 0x00 #define SSR_MODE_ENABLE 0x01 @@ -398,7 +398,7 @@ static DEFINE_PCI_DEVICE_TABLE(i7core_pci_tbl) = { }; /**************************************************************************** - Anciliary status routines + Ancillary status routines ****************************************************************************/ /* MC_CONTROL bits */ @@ -1361,7 +1361,7 @@ static int i7core_get_onedevice(struct pci_dev **prev, dev_descr->dev_id, *prev); /* - * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs + * On Xeon 55xx, the Intel QuickPath Arch Generic Non-core regs * is at addr 8086:2c40, instead of 8086:2c41. So, we need * to probe for the alternate address in case of failure */ @@ -2132,7 +2132,7 @@ static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw) /* * get_sdram_scrub_rate This routine convert current scrub rate value - * into byte/sec bandwidth accourding to + * into byte/sec bandwidth according to * SCRUBINTERVAL formula found in datasheet. */ static int get_sdram_scrub_rate(struct mem_ctl_info *mci) diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index a203536d90dd..123204f8e23b 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -58,7 +58,7 @@ static int probed; /* * FIXME: For now, let's order by device function, as it makes - * easier for driver's development proccess. This table should be + * easier for driver's development process. This table should be * moved to pci_id.h when submitted upstream */ #define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0 0x3cf4 /* 12.6 */ @@ -375,7 +375,7 @@ static DEFINE_PCI_DEVICE_TABLE(sbridge_pci_tbl) = { /**************************************************************************** - Anciliary status routines + Ancillary status routines ****************************************************************************/ static inline int numrank(u32 mtr) @@ -1430,7 +1430,7 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci, type = "FATAL"; /* - * According with Table 15-9 of the Intel Archictecture spec vol 3A, + * According with Table 15-9 of the Intel Architecture spec vol 3A, * memory errors should fit in this mask: * 000f 0000 1mmm cccc (binary) * where: -- cgit v1.2.3 From e1d206018831c789cf4445e8f641b3c0df90b2bb Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 7 May 2012 11:00:37 +0200 Subject: c2port: fix bogus Kconfig "default no" Strictly speaking "no" is a valid, but undefined, Kconfig symbol. But what obviously was meant here was "n". While we're touching this Kconfig file also drop the superfluous dependency on C2PORT for C2PORT_DURAMAR_2150. Its Kconfig entry is already wrapped in "if C2PORT" and "endif". Signed-off-by: Paul Bolle Signed-off-by: Jiri Kosina --- drivers/misc/c2port/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig index e46af9a5810d..33ee834e1b83 100644 --- a/drivers/misc/c2port/Kconfig +++ b/drivers/misc/c2port/Kconfig @@ -5,7 +5,7 @@ menuconfig C2PORT tristate "Silicon Labs C2 port support (EXPERIMENTAL)" depends on EXPERIMENTAL - default no + default n help This option enables support for Silicon Labs C2 port used to program Silicon micro controller chips (and other 8051 compatible). @@ -23,8 +23,8 @@ if C2PORT config C2PORT_DURAMAR_2150 tristate "C2 port support for Eurotech's Duramar 2150 (EXPERIMENTAL)" - depends on X86 && C2PORT - default no + depends on X86 + default n help This option enables C2 support for the Eurotech's Duramar 2150 on board micro controller. -- cgit v1.2.3 From d132d7f6fbb9cc246dab828fc9740e5caf78aeb3 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 7 May 2012 11:14:59 +0200 Subject: Kconfig: replace "--- help ---" with "---help---" There are three Kconfig entries with "--- help ---" attributes, and over 2000 Kconfig entries with "---help---" attributes. Apparently the three attributes with embedded spaces are valid. Still, I see little reason for using this obscure variant. And replacing those three attributes with the common variant makes grepping Kconfig files for help texts a bit easier too. Signed-off-by: Paul Bolle Signed-off-by: Jiri Kosina --- drivers/usb/host/Kconfig | 2 +- drivers/w1/Kconfig | 2 +- net/caif/Kconfig | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index f788eb86707c..e96c4b91644e 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -152,7 +152,7 @@ config USB_EHCI_HCD_OMAP bool "EHCI support for OMAP3 and later chips" depends on USB_EHCI_HCD && ARCH_OMAP default y - --- help --- + ---help--- Enables support for the on-chip EHCI controller on OMAP3 and later chips. diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig index fd2c7bd9dfbe..6743bde038cc 100644 --- a/drivers/w1/Kconfig +++ b/drivers/w1/Kconfig @@ -16,7 +16,7 @@ config W1_CON depends on CONNECTOR bool "Userspace communication over connector" default y - --- help --- + ---help--- This allows to communicate with userspace using connector. For more information see . There are three types of messages between w1 core and userspace: diff --git a/net/caif/Kconfig b/net/caif/Kconfig index 936361e5a2b6..d3694953b1d7 100644 --- a/net/caif/Kconfig +++ b/net/caif/Kconfig @@ -25,7 +25,7 @@ config CAIF_DEBUG bool "Enable Debug" depends on CAIF default n - --- help --- + ---help--- Enable the inclusion of debug code in the CAIF stack. Be aware that doing this will impact performance. If unsure say N. -- cgit v1.2.3 From 1f0459780c28491c480f7098f3ece79334ccae0a Mon Sep 17 00:00:00 2001 From: Philipp Hahn Date: Wed, 2 May 2012 18:09:35 +0200 Subject: atomic64_32.h: fix parameter naming mismatch The doc string doesn't match the parameter name, fix @p -> @v @ptr -> @v @n -> @i Signed-off-by: Philipp Hahn Signed-off-by: Jiri Kosina --- arch/x86/include/asm/atomic64_32.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/include/asm/atomic64_32.h b/arch/x86/include/asm/atomic64_32.h index 198119910da5..b154de75c90c 100644 --- a/arch/x86/include/asm/atomic64_32.h +++ b/arch/x86/include/asm/atomic64_32.h @@ -63,7 +63,7 @@ ATOMIC64_DECL(add_unless); /** * atomic64_cmpxchg - cmpxchg atomic64 variable - * @p: pointer to type atomic64_t + * @v: pointer to type atomic64_t * @o: expected value * @n: new value * @@ -98,7 +98,7 @@ static inline long long atomic64_xchg(atomic64_t *v, long long n) /** * atomic64_set - set atomic64 variable * @v: pointer to type atomic64_t - * @n: value to assign + * @i: value to assign * * Atomically sets the value of @v to @n. */ @@ -200,7 +200,7 @@ static inline long long atomic64_sub(long long i, atomic64_t *v) * atomic64_sub_and_test - subtract value from variable and test result * @i: integer value to subtract * @v: pointer to type atomic64_t - * + * * Atomically subtracts @i from @v and returns * true if the result is zero, or false for all * other cases. @@ -224,9 +224,9 @@ static inline void atomic64_inc(atomic64_t *v) /** * atomic64_dec - decrement atomic64 variable - * @ptr: pointer to type atomic64_t + * @v: pointer to type atomic64_t * - * Atomically decrements @ptr by 1. + * Atomically decrements @v by 1. */ static inline void atomic64_dec(atomic64_t *v) { -- cgit v1.2.3 From c0a788c451e1f88b3fb5a85113b87dbc98c7abe4 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 7 May 2012 15:33:04 -0400 Subject: net: Fix tcp_build_and_update_options comment in struct tcp_sock Noticed this comment didn't get updated when tcp_build_and_update_options was refactored. Signed-off-by: Kyle McMartin Signed-off-by: Jiri Kosina --- include/linux/tcp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/tcp.h b/include/linux/tcp.h index b6c62d294380..288d201c3b59 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -406,7 +406,7 @@ struct tcp_sock { struct sk_buff_head out_of_order_queue; /* Out of order segments go here */ - /* SACKs data, these 2 need to be together (see tcp_build_and_update_options) */ + /* SACKs data, these 2 need to be together (see tcp_options_write) */ struct tcp_sack_block duplicate_sack[1]; /* D-SACK block */ struct tcp_sack_block selective_acks[4]; /* The SACKS themselves*/ -- cgit v1.2.3 From 8533848809c761035196723391e665e7247c670f Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Wed, 16 May 2012 09:41:17 +0000 Subject: i2c: Change mail address of Oskar Schirmer That old mail address doesnt exist any more. This changes all occurences to my new address. Signed-off-by: Oskar Schirmer Cc: Jean Delvare Signed-off-by: Jiri Kosina --- drivers/i2c/busses/i2c-s6000.c | 2 +- drivers/i2c/busses/i2c-s6000.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c index c64ba736f480..b76a29d1f8e4 100644 --- a/drivers/i2c/busses/i2c-s6000.c +++ b/drivers/i2c/busses/i2c-s6000.c @@ -3,7 +3,7 @@ * * Description: Driver for S6000 Family I2C Interface * Copyright (c) 2008 emlix GmbH - * Author: Oskar Schirmer + * Author: Oskar Schirmer * * Partially based on i2c-bfin-twi.c driver by * Copyright (c) 2005-2007 Analog Devices, Inc. diff --git a/drivers/i2c/busses/i2c-s6000.h b/drivers/i2c/busses/i2c-s6000.h index ff23b81ded44..4936f9f2256f 100644 --- a/drivers/i2c/busses/i2c-s6000.h +++ b/drivers/i2c/busses/i2c-s6000.h @@ -6,7 +6,7 @@ * for more details. * * Copyright (C) 2008 Emlix GmbH - * Author: Oskar Schirmer + * Author: Oskar Schirmer */ #ifndef __DRIVERS_I2C_BUSSES_I2C_S6000_H -- cgit v1.2.3 From b7799b05d8d13819ebde62da9e06255d1f6f2cf3 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Wed, 16 May 2012 09:41:20 +0000 Subject: arm/m68k: Change mail address of Sebastian Hess That old mail address doesnt exist any more. This changes all occurences to a current address. Signed-off-by: Oskar Schirmer Acked-by: Sebastian Heß Cc: Geert Uytterhoeven Signed-off-by: Jiri Kosina --- arch/m68k/platform/532x/config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/m68k/platform/532x/config.c b/arch/m68k/platform/532x/config.c index 2bec3477b739..db8707f5e037 100644 --- a/arch/m68k/platform/532x/config.c +++ b/arch/m68k/platform/532x/config.c @@ -7,7 +7,7 @@ * Copyright (C) 2000, Lineo (www.lineo.com) * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com * Copyright Freescale Semiconductor, Inc 2006 - * Copyright (c) 2006, emlix, Sebastian Hess + * Copyright (c) 2006, emlix, Sebastian Hess * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by -- cgit v1.2.3 From 3d4f5eb1264a1d3aa4aa19502d8c588b3cc4ecc4 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Wed, 16 May 2012 09:41:18 +0000 Subject: net: Change mail address of Oskar Schirmer That old mail address doesnt exist any more. This changes all occurences to my new address. Signed-off-by: Oskar Schirmer Cc: netdev@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/net/ethernet/s6gmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/s6gmac.c b/drivers/net/ethernet/s6gmac.c index 1895605abb35..6f0d28429e30 100644 --- a/drivers/net/ethernet/s6gmac.c +++ b/drivers/net/ethernet/s6gmac.c @@ -1,7 +1,7 @@ /* * Ethernet driver for S6105 on chip network device * (c)2008 emlix GmbH http://www.emlix.com - * Authors: Oskar Schirmer + * Authors: Oskar Schirmer * Daniel Gloeckner * * This program is free software; you can redistribute it and/or @@ -1070,4 +1070,4 @@ module_exit(s6gmac_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("S6105 on chip Ethernet driver"); -MODULE_AUTHOR("Oskar Schirmer "); +MODULE_AUTHOR("Oskar Schirmer "); -- cgit v1.2.3 From 6684b5729df289ba60a404d8d095d820dc553cdf Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Wed, 16 May 2012 09:41:19 +0000 Subject: lib: Change mail address of Oskar Schirmer That old mail address doesnt exist any more. This changes all occurences to my new address. Signed-off-by: Oskar Schirmer Cc: Paul Gortmaker Signed-off-by: Jiri Kosina --- include/linux/rational.h | 2 +- lib/rational.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/rational.h b/include/linux/rational.h index 4f532fcd9eea..bfa6a2bcfb32 100644 --- a/include/linux/rational.h +++ b/include/linux/rational.h @@ -1,7 +1,7 @@ /* * rational fractions * - * Copyright (C) 2009 emlix GmbH, Oskar Schirmer + * Copyright (C) 2009 emlix GmbH, Oskar Schirmer * * helper functions when coping with rational numbers, * e.g. when calculating optimum numerator/denominator pairs for diff --git a/lib/rational.c b/lib/rational.c index d326da3976f5..f0aa21c2a762 100644 --- a/lib/rational.c +++ b/lib/rational.c @@ -1,7 +1,7 @@ /* * rational fractions * - * Copyright (C) 2009 emlix GmbH, Oskar Schirmer + * Copyright (C) 2009 emlix GmbH, Oskar Schirmer * * helper functions when coping with rational numbers */ -- cgit v1.2.3 From a45170e7ad65b2b7179c7bbe8780882159c829fb Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Wed, 16 May 2012 09:41:16 +0000 Subject: xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer These old mail addresses dont exist any more. This changes all occurences to the authors' current addresses. Signed-off-by: Oskar Schirmer Cc: Chris Zankel Acked-by: Johannes Weiner Signed-off-by: Jiri Kosina --- arch/xtensa/variants/s6000/dmac.c | 2 +- arch/xtensa/variants/s6000/gpio.c | 4 ++-- arch/xtensa/variants/s6000/include/variant/dmac.h | 2 +- arch/xtensa/variants/s6000/irq.c | 4 ++-- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/xtensa/variants/s6000/dmac.c b/arch/xtensa/variants/s6000/dmac.c index dc7f7c573518..340f5bb0b5ef 100644 --- a/arch/xtensa/variants/s6000/dmac.c +++ b/arch/xtensa/variants/s6000/dmac.c @@ -1,5 +1,5 @@ /* - * Authors: Oskar Schirmer + * Authors: Oskar Schirmer * Daniel Gloeckner * (c) 2008 emlix GmbH http://www.emlix.com * diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c index 7af0757e001b..b89541ba39ab 100644 --- a/arch/xtensa/variants/s6000/gpio.c +++ b/arch/xtensa/variants/s6000/gpio.c @@ -2,8 +2,8 @@ * s6000 gpio driver * * Copyright (c) 2009 emlix GmbH - * Authors: Oskar Schirmer - * Johannes Weiner + * Authors: Oskar Schirmer + * Johannes Weiner * Daniel Gloeckner */ #include diff --git a/arch/xtensa/variants/s6000/include/variant/dmac.h b/arch/xtensa/variants/s6000/include/variant/dmac.h index e81735b2a206..3f88d9fc6897 100644 --- a/arch/xtensa/variants/s6000/include/variant/dmac.h +++ b/arch/xtensa/variants/s6000/include/variant/dmac.h @@ -8,7 +8,7 @@ * Copyright (C) 2006 Tensilica Inc. * Copyright (C) 2008 Emlix GmbH * Authors: Fabian Godehardt - * Oskar Schirmer + * Oskar Schirmer * Daniel Gloeckner */ diff --git a/arch/xtensa/variants/s6000/irq.c b/arch/xtensa/variants/s6000/irq.c index 6651e3285fcf..81a241e79075 100644 --- a/arch/xtensa/variants/s6000/irq.c +++ b/arch/xtensa/variants/s6000/irq.c @@ -2,8 +2,8 @@ * s6000 irq crossbar * * Copyright (c) 2009 emlix GmbH - * Authors: Johannes Weiner - * Oskar Schirmer + * Authors: Johannes Weiner + * Oskar Schirmer */ #include #include -- cgit v1.2.3 From f70d4a95edc7da87f39cd8b603ba131df2c198ed Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 22 May 2012 10:56:21 +0200 Subject: edac, mips: don't change code that has been removed in edac/mips tree This is a partial revert of 15ed103a9800 ("edac: Fix spelling errors") 6997991ab0db ("mips: Fix printk typos in arc/mips") which change code that doesn't exist any more in edac/mips trees. Reported-by: Stephen Rothwell Signed-off-by: Jiri Kosina --- arch/mips/pci/pci-lantiq.c | 2 +- drivers/edac/edac_core.h | 2 +- drivers/edac/edac_device.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index 70fdf2c7919b..030c77e7926e 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -297,7 +297,7 @@ int __init pcibios_init(void) { int ret = platform_driver_register(<q_pci_driver); if (ret) - printk(KERN_INFO "ltq_pci: Error registering platform driver!"); + printk(KERN_INFO "ltq_pci: Error registering platfom driver!"); return ret; } diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 841bb2d7ce61..5b739411d62f 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -460,7 +460,7 @@ extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, /* * The no info errors are used when error overflows are reported. * There are a limited number of error logging registers that can - * be exhausted. When all registers are exhausted and an additional + * be exausted. When all registers are exhausted and an additional * error occurs then an error overflow register records that an * error occurred and the type of error, but doesn't have any * further information. The ce/ue versions make for cleaner diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c index da4a1f11939f..45b8f4bdd773 100644 --- a/drivers/edac/edac_device.c +++ b/drivers/edac/edac_device.c @@ -367,7 +367,7 @@ static void del_edac_device_from_global_list(struct edac_device_ctl_info * structure, that needs to be polled for possible error events. * * This operation is to acquire the list mutex lock - * (thus preventing insertion or deletion) + * (thus preventing insertation or deletion) * and then call the device's poll function IFF this device is * running polled and there is a poll function defined. */ -- cgit v1.2.3