From 4eb788df670ef30a19b7ea15b107ea440544bc80 Mon Sep 17 00:00:00 2001
From: Shaohua Li
Date: Thu, 19 Jul 2012 16:01:31 +1000
Subject: raid5: reduce chance release_stripe() taking device_lock

release_stripe() is a place conf->device_lock is heavily contended. We take the
lock even stripe count isn't 1, which isn't required.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid5.c | 75 +++++++++++++++++++++++++++++-------------------------
 1 file changed, 41 insertions(+), 34 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 04348d76bb30..848034666342 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -190,49 +190,56 @@ static int stripe_operations_active(struct stripe_head *sh)
 	       test_bit(STRIPE_COMPUTE_RUN, &sh->state);
 }
 
-static void __release_stripe(struct r5conf *conf, struct stripe_head *sh)
-{
-	if (atomic_dec_and_test(&sh->count)) {
-		BUG_ON(!list_empty(&sh->lru));
-		BUG_ON(atomic_read(&conf->active_stripes)==0);
-		if (test_bit(STRIPE_HANDLE, &sh->state)) {
-			if (test_bit(STRIPE_DELAYED, &sh->state) &&
-			    !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
-				list_add_tail(&sh->lru, &conf->delayed_list);
-			else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
-				   sh->bm_seq - conf->seq_write > 0)
-				list_add_tail(&sh->lru, &conf->bitmap_list);
-			else {
-				clear_bit(STRIPE_DELAYED, &sh->state);
-				clear_bit(STRIPE_BIT_DELAY, &sh->state);
-				list_add_tail(&sh->lru, &conf->handle_list);
-			}
-			md_wakeup_thread(conf->mddev->thread);
-		} else {
-			BUG_ON(stripe_operations_active(sh));
-			if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
-				if (atomic_dec_return(&conf->preread_active_stripes)
-				    < IO_THRESHOLD)
-					md_wakeup_thread(conf->mddev->thread);
-			atomic_dec(&conf->active_stripes);
-			if (!test_bit(STRIPE_EXPANDING, &sh->state)) {
-				list_add_tail(&sh->lru, &conf->inactive_list);
-				wake_up(&conf->wait_for_stripe);
-				if (conf->retry_read_aligned)
-					md_wakeup_thread(conf->mddev->thread);
-			}
+static void do_release_stripe(struct r5conf *conf, struct stripe_head *sh)
+{
+	BUG_ON(!list_empty(&sh->lru));
+	BUG_ON(atomic_read(&conf->active_stripes)==0);
+	if (test_bit(STRIPE_HANDLE, &sh->state)) {
+		if (test_bit(STRIPE_DELAYED, &sh->state) &&
+		    !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
+			list_add_tail(&sh->lru, &conf->delayed_list);
+		else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
+			   sh->bm_seq - conf->seq_write > 0)
+			list_add_tail(&sh->lru, &conf->bitmap_list);
+		else {
+			clear_bit(STRIPE_DELAYED, &sh->state);
+			clear_bit(STRIPE_BIT_DELAY, &sh->state);
+			list_add_tail(&sh->lru, &conf->handle_list);
+		}
+		md_wakeup_thread(conf->mddev->thread);
+	} else {
+		BUG_ON(stripe_operations_active(sh));
+		if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
+			if (atomic_dec_return(&conf->preread_active_stripes)
+			    < IO_THRESHOLD)
+				md_wakeup_thread(conf->mddev->thread);
+		atomic_dec(&conf->active_stripes);
+		if (!test_bit(STRIPE_EXPANDING, &sh->state)) {
+			list_add_tail(&sh->lru, &conf->inactive_list);
+			wake_up(&conf->wait_for_stripe);
+			if (conf->retry_read_aligned)
+				md_wakeup_thread(conf->mddev->thread);
 		}
 	}
 }
 
+static void __release_stripe(struct r5conf *conf, struct stripe_head *sh)
+{
+	if (atomic_dec_and_test(&sh->count))
+		do_release_stripe(conf, sh);
+}
+
 static void release_stripe(struct stripe_head *sh)
 {
 	struct r5conf *conf = sh->raid_conf;
 	unsigned long flags;
 
-	spin_lock_irqsave(&conf->device_lock, flags);
-	__release_stripe(conf, sh);
-	spin_unlock_irqrestore(&conf->device_lock, flags);
+	local_irq_save(flags);
+	if (atomic_dec_and_lock(&sh->count, &conf->device_lock)) {
+		do_release_stripe(conf, sh);
+		spin_unlock(&conf->device_lock);
+	}
+	local_irq_restore(flags);
 }
 
 static inline void remove_hash(struct stripe_head *sh)
-- 
cgit v1.2.3


From e7836bd6f60d659830b87804f7f4026edfe0f1d1 Mon Sep 17 00:00:00 2001
From: Shaohua Li
Date: Thu, 19 Jul 2012 16:01:31 +1000
Subject: raid5: lockless access raid5 overrided bi_phys_segments

Raid5 overrides bio->bi_phys_segments, accessing it is with device_lock hold,
which is unnecessary, We can make it lockless actually.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid5.c | 62 ++++++++++++++++++++++++++++--------------------------
 1 file changed, 32 insertions(+), 30 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 848034666342..6ef1eeb68f7c 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -99,34 +99,40 @@ static inline struct bio *r5_next_bio(struct bio *bio, sector_t sector)
  * We maintain a biased count of active stripes in the bottom 16 bits of
  * bi_phys_segments, and a count of processed stripes in the upper 16 bits
  */
-static inline int raid5_bi_phys_segments(struct bio *bio)
+static inline int raid5_bi_processed_stripes(struct bio *bio)
 {
-	return bio->bi_phys_segments & 0xffff;
+	atomic_t *segments = (atomic_t *)&bio->bi_phys_segments;
+	return (atomic_read(segments) >> 16) & 0xffff;
 }
 
-static inline int raid5_bi_hw_segments(struct bio *bio)
+static inline int raid5_dec_bi_active_stripes(struct bio *bio)
 {
-	return (bio->bi_phys_segments >> 16) & 0xffff;
+	atomic_t *segments = (atomic_t *)&bio->bi_phys_segments;
+	return atomic_sub_return(1, segments) & 0xffff;
 }
 
-static inline int raid5_dec_bi_phys_segments(struct bio *bio)
+static inline void raid5_inc_bi_active_stripes(struct bio *bio)
 {
-	--bio->bi_phys_segments;
-	return raid5_bi_phys_segments(bio);
+	atomic_t *segments = (atomic_t *)&bio->bi_phys_segments;
+	atomic_inc(segments);
 }
 
-static inline int raid5_dec_bi_hw_segments(struct bio *bio)
+static inline void raid5_set_bi_processed_stripes(struct bio *bio,
+	unsigned int cnt)
 {
-	unsigned short val = raid5_bi_hw_segments(bio);
+	atomic_t *segments = (atomic_t *)&bio->bi_phys_segments;
+	int old, new;
 
-	--val;
-	bio->bi_phys_segments = (val << 16) | raid5_bi_phys_segments(bio);
-	return val;
+	do {
+		old = atomic_read(segments);
+		new = (old & 0xffff) | (cnt << 16);
+	} while (atomic_cmpxchg(segments, old, new) != old);
 }
 
-static inline void raid5_set_bi_hw_segments(struct bio *bio, unsigned int cnt)
+static inline void raid5_set_bi_stripes(struct bio *bio, unsigned int cnt)
 {
-	bio->bi_phys_segments = raid5_bi_phys_segments(bio) | (cnt << 16);
+	atomic_t *segments = (atomic_t *)&bio->bi_phys_segments;
+	atomic_set(segments, cnt);
 }
 
 /* Find first data disk in a raid6 stripe */
@@ -781,7 +787,7 @@ static void ops_complete_biofill(void *stripe_head_ref)
 			while (rbi && rbi->bi_sector <
 				dev->sector + STRIPE_SECTORS) {
 				rbi2 = r5_next_bio(rbi, dev->sector);
-				if (!raid5_dec_bi_phys_segments(rbi)) {
+				if (!raid5_dec_bi_active_stripes(rbi)) {
 					rbi->bi_next = return_bi;
 					return_bi = rbi;
 				}
@@ -2367,7 +2373,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
 	if (*bip)
 		bi->bi_next = *bip;
 	*bip = bi;
-	bi->bi_phys_segments++;
+	raid5_inc_bi_active_stripes(bi);
 
 	if (forwrite) {
 		/* check if page is covered */
@@ -2464,7 +2470,7 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh,
 			sh->dev[i].sector + STRIPE_SECTORS) {
 			struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
 			clear_bit(BIO_UPTODATE, &bi->bi_flags);
-			if (!raid5_dec_bi_phys_segments(bi)) {
+			if (!raid5_dec_bi_active_stripes(bi)) {
 				md_write_end(conf->mddev);
 				bi->bi_next = *return_bi;
 				*return_bi = bi;
@@ -2479,7 +2485,7 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh,
 		       sh->dev[i].sector + STRIPE_SECTORS) {
 			struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector);
 			clear_bit(BIO_UPTODATE, &bi->bi_flags);
-			if (!raid5_dec_bi_phys_segments(bi)) {
+			if (!raid5_dec_bi_active_stripes(bi)) {
 				md_write_end(conf->mddev);
 				bi->bi_next = *return_bi;
 				*return_bi = bi;
@@ -2503,7 +2509,7 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh,
 				struct bio *nextbi =
 					r5_next_bio(bi, sh->dev[i].sector);
 				clear_bit(BIO_UPTODATE, &bi->bi_flags);
-				if (!raid5_dec_bi_phys_segments(bi)) {
+				if (!raid5_dec_bi_active_stripes(bi)) {
 					bi->bi_next = *return_bi;
 					*return_bi = bi;
 				}
@@ -2722,7 +2728,7 @@ static void handle_stripe_clean_event(struct r5conf *conf,
 				while (wbi && wbi->bi_sector <
 					dev->sector + STRIPE_SECTORS) {
 					wbi2 = r5_next_bio(wbi, dev->sector);
-					if (!raid5_dec_bi_phys_segments(wbi)) {
+					if (!raid5_dec_bi_active_stripes(wbi)) {
 						md_write_end(conf->mddev);
 						wbi->bi_next = *return_bi;
 						*return_bi = wbi;
@@ -3798,7 +3804,7 @@ static struct bio *remove_bio_from_retry(struct r5conf *conf)
 		 * this sets the active strip count to 1 and the processed
 		 * strip count to zero (upper 8 bits)
 		 */
-		bi->bi_phys_segments = 1; /* biased count of active stripes */
+		raid5_set_bi_stripes(bi, 1); /* biased count of active stripes */
 	}
 
 	return bi;
@@ -4133,9 +4139,7 @@ static void make_request(struct mddev *mddev, struct bio * bi)
 		}
 	}
 
-	spin_lock_irq(&conf->device_lock);
-	remaining = raid5_dec_bi_phys_segments(bi);
-	spin_unlock_irq(&conf->device_lock);
+	remaining = raid5_dec_bi_active_stripes(bi);
 	if (remaining == 0) {
 
 		if ( rw == WRITE )
@@ -4491,7 +4495,7 @@ static int  retry_aligned_read(struct r5conf *conf, struct bio *raid_bio)
 		     sector += STRIPE_SECTORS,
 		     scnt++) {
 
-		if (scnt < raid5_bi_hw_segments(raid_bio))
+		if (scnt < raid5_bi_processed_stripes(raid_bio))
 			/* already done this stripe */
 			continue;
 
@@ -4499,14 +4503,14 @@ static int  retry_aligned_read(struct r5conf *conf, struct bio *raid_bio)
 
 		if (!sh) {
 			/* failed to get a stripe - must wait */
-			raid5_set_bi_hw_segments(raid_bio, scnt);
+			raid5_set_bi_processed_stripes(raid_bio, scnt);
 			conf->retry_read_aligned = raid_bio;
 			return handled;
 		}
 
 		if (!add_stripe_bio(sh, raid_bio, dd_idx, 0)) {
 			release_stripe(sh);
-			raid5_set_bi_hw_segments(raid_bio, scnt);
+			raid5_set_bi_processed_stripes(raid_bio, scnt);
 			conf->retry_read_aligned = raid_bio;
 			return handled;
 		}
@@ -4515,9 +4519,7 @@ static int  retry_aligned_read(struct r5conf *conf, struct bio *raid_bio)
 		release_stripe(sh);
 		handled++;
 	}
-	spin_lock_irq(&conf->device_lock);
-	remaining = raid5_dec_bi_phys_segments(raid_bio);
-	spin_unlock_irq(&conf->device_lock);
+	remaining = raid5_dec_bi_active_stripes(raid_bio);
 	if (remaining == 0)
 		bio_endio(raid_bio, 0);
 	if (atomic_dec_and_test(&conf->active_aligned_reads))
-- 
cgit v1.2.3


From 7eaf7e8eb31747e4259d60288b44b194fb3d56c7 Mon Sep 17 00:00:00 2001
From: Shaohua Li
Date: Thu, 19 Jul 2012 16:01:31 +1000
Subject: raid5: remove unnecessary bitmap write optimization

Neil pointed out the bitmap write optimization in handle_stripe_clean_event()
is unnecessary, because the chance one stripe gets written twice in the mean
time is rare. We can always do a bitmap_startwrite when a write request is
added to a stripe and bitmap_endwrite after write request is done.  Delete the
optimization. With it, we can delete some cases of device_lock.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid5.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 6ef1eeb68f7c..9ad452c6d7e3 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2357,7 +2357,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
 	spin_lock_irq(&conf->device_lock);
 	if (forwrite) {
 		bip = &sh->dev[dd_idx].towrite;
-		if (*bip == NULL && sh->dev[dd_idx].written == NULL)
+		if (*bip == NULL)
 			firstwrite = 1;
 	} else
 		bip = &sh->dev[dd_idx].toread;
@@ -2458,6 +2458,7 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh,
 		/* fail all writes first */
 		bi = sh->dev[i].towrite;
 		sh->dev[i].towrite = NULL;
+		spin_unlock_irq(&conf->device_lock);
 		if (bi) {
 			s->to_write--;
 			bitmap_end = 1;
@@ -2477,6 +2478,10 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh,
 			}
 			bi = nextbi;
 		}
+		if (bitmap_end)
+			bitmap_endwrite(conf->mddev->bitmap, sh->sector,
+				STRIPE_SECTORS, 0, 0);
+		bitmap_end = 0;
 		/* and fail all 'written' */
 		bi = sh->dev[i].written;
 		sh->dev[i].written = NULL;
@@ -2516,7 +2521,6 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh,
 				bi = nextbi;
 			}
 		}
-		spin_unlock_irq(&conf->device_lock);
 		if (bitmap_end)
 			bitmap_endwrite(conf->mddev->bitmap, sh->sector,
 					STRIPE_SECTORS, 0, 0);
@@ -2720,9 +2724,7 @@ static void handle_stripe_clean_event(struct r5conf *conf,
 				test_bit(R5_UPTODATE, &dev->flags)) {
 				/* We can return any write requests */
 				struct bio *wbi, *wbi2;
-				int bitmap_end = 0;
 				pr_debug("Return write for disc %d\n", i);
-				spin_lock_irq(&conf->device_lock);
 				wbi = dev->written;
 				dev->written = NULL;
 				while (wbi && wbi->bi_sector <
@@ -2735,15 +2737,10 @@ static void handle_stripe_clean_event(struct r5conf *conf,
 					}
 					wbi = wbi2;
 				}
-				if (dev->towrite == NULL)
-					bitmap_end = 1;
-				spin_unlock_irq(&conf->device_lock);
-				if (bitmap_end)
-					bitmap_endwrite(conf->mddev->bitmap,
-							sh->sector,
-							STRIPE_SECTORS,
+				bitmap_endwrite(conf->mddev->bitmap, sh->sector,
+						STRIPE_SECTORS,
 					 !test_bit(STRIPE_DEGRADED, &sh->state),
-							0);
+						0);
 			}
 		}
 
-- 
cgit v1.2.3


From b17459c05000fdbe8d10946570a26510f86ec0f6 Mon Sep 17 00:00:00 2001
From: Shaohua Li
Date: Thu, 19 Jul 2012 16:01:31 +1000
Subject: raid5: add a per-stripe lock

Add a per-stripe lock to protect stripe specific data. The purpose is to reduce
lock contention of conf->device_lock.

stripe ->toread, ->towrite are protected by per-stripe lock.  Accessing bio
list of the stripe is always serialized by this lock, so adding bio to the
lists (add_stripe_bio()) and removing bio from the lists (like
ops_run_biofill()) not race.

If bio in ->read, ->written ... list are not shared by multiple stripes, we
don't need any lock to protect ->read, ->written, because STRIPE_ACTIVE will
protect them. If the bio are shared,  there are two protections:
1. bi_phys_segments acts as a reference count
2. traverse the list uses r5_next_bio, which makes traverse never access bio
not belonging to the stripe

Let's have an example:
|  stripe1 |  stripe2    |  stripe3  |
...bio1......|bio2|bio3|....bio4.....

stripe2 has 4 bios, when it's finished, it will decrement bi_phys_segments for
all bios, but only end_bio for bio2 and bio3. bio1->bi_next still points to
bio2, but this doesn't matter. When stripe1 is finished, it will not touch bio2
because of r5_next_bio check. Next time stripe1 will end_bio for bio1 and
stripe3 will end_bio bio4.

before add_stripe_bio() addes a bio to a stripe, we already increament the bio
bi_phys_segments, so don't worry other stripes release the bio.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid5.c | 35 +++++++++++++++++++----------------
 drivers/md/raid5.h |  1 +
 2 files changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 9ad452c6d7e3..c2192a2907e4 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -762,14 +762,12 @@ static void ops_complete_biofill(void *stripe_head_ref)
 {
 	struct stripe_head *sh = stripe_head_ref;
 	struct bio *return_bi = NULL;
-	struct r5conf *conf = sh->raid_conf;
 	int i;
 
 	pr_debug("%s: stripe %llu\n", __func__,
 		(unsigned long long)sh->sector);
 
 	/* clear completed biofills */
-	spin_lock_irq(&conf->device_lock);
 	for (i = sh->disks; i--; ) {
 		struct r5dev *dev = &sh->dev[i];
 
@@ -795,7 +793,6 @@ static void ops_complete_biofill(void *stripe_head_ref)
 			}
 		}
 	}
-	spin_unlock_irq(&conf->device_lock);
 	clear_bit(STRIPE_BIOFILL_RUN, &sh->state);
 
 	return_io(return_bi);
@@ -807,7 +804,6 @@ static void ops_complete_biofill(void *stripe_head_ref)
 static void ops_run_biofill(struct stripe_head *sh)
 {
 	struct dma_async_tx_descriptor *tx = NULL;
-	struct r5conf *conf = sh->raid_conf;
 	struct async_submit_ctl submit;
 	int i;
 
@@ -818,10 +814,10 @@ static void ops_run_biofill(struct stripe_head *sh)
 		struct r5dev *dev = &sh->dev[i];
 		if (test_bit(R5_Wantfill, &dev->flags)) {
 			struct bio *rbi;
-			spin_lock_irq(&conf->device_lock);
+			spin_lock_irq(&sh->stripe_lock);
 			dev->read = rbi = dev->toread;
 			dev->toread = NULL;
-			spin_unlock_irq(&conf->device_lock);
+			spin_unlock_irq(&sh->stripe_lock);
 			while (rbi && rbi->bi_sector <
 				dev->sector + STRIPE_SECTORS) {
 				tx = async_copy_data(0, rbi, dev->page,
@@ -1157,12 +1153,12 @@ ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
 		if (test_and_clear_bit(R5_Wantdrain, &dev->flags)) {
 			struct bio *wbi;
 
-			spin_lock_irq(&sh->raid_conf->device_lock);
+			spin_lock_irq(&sh->stripe_lock);
 			chosen = dev->towrite;
 			dev->towrite = NULL;
 			BUG_ON(dev->written);
 			wbi = dev->written = chosen;
-			spin_unlock_irq(&sh->raid_conf->device_lock);
+			spin_unlock_irq(&sh->stripe_lock);
 
 			while (wbi && wbi->bi_sector <
 				dev->sector + STRIPE_SECTORS) {
@@ -1467,6 +1463,8 @@ static int grow_one_stripe(struct r5conf *conf)
 	init_waitqueue_head(&sh->ops.wait_for_ops);
 	#endif
 
+	spin_lock_init(&sh->stripe_lock);
+
 	if (grow_buffers(sh)) {
 		shrink_buffers(sh);
 		kmem_cache_free(conf->slab_cache, sh);
@@ -2353,8 +2351,15 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
 		(unsigned long long)bi->bi_sector,
 		(unsigned long long)sh->sector);
 
-
-	spin_lock_irq(&conf->device_lock);
+	/*
+	 * If several bio share a stripe. The bio bi_phys_segments acts as a
+	 * reference count to avoid race. The reference count should already be
+	 * increased before this function is called (for example, in
+	 * make_request()), so other bio sharing this stripe will not free the
+	 * stripe. If a stripe is owned by one stripe, the stripe lock will
+	 * protect it.
+	 */
+	spin_lock_irq(&sh->stripe_lock);
 	if (forwrite) {
 		bip = &sh->dev[dd_idx].towrite;
 		if (*bip == NULL)
@@ -2388,7 +2393,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
 		if (sector >= sh->dev[dd_idx].sector + STRIPE_SECTORS)
 			set_bit(R5_OVERWRITE, &sh->dev[dd_idx].flags);
 	}
-	spin_unlock_irq(&conf->device_lock);
+	spin_unlock_irq(&sh->stripe_lock);
 
 	pr_debug("added bi b#%llu to stripe s#%llu, disk %d.\n",
 		(unsigned long long)(*bip)->bi_sector,
@@ -2404,7 +2409,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
 
  overlap:
 	set_bit(R5_Overlap, &sh->dev[dd_idx].flags);
-	spin_unlock_irq(&conf->device_lock);
+	spin_unlock_irq(&sh->stripe_lock);
 	return 0;
 }
 
@@ -2454,11 +2459,11 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh,
 				rdev_dec_pending(rdev, conf->mddev);
 			}
 		}
-		spin_lock_irq(&conf->device_lock);
+		spin_lock_irq(&sh->stripe_lock);
 		/* fail all writes first */
 		bi = sh->dev[i].towrite;
 		sh->dev[i].towrite = NULL;
-		spin_unlock_irq(&conf->device_lock);
+		spin_unlock_irq(&sh->stripe_lock);
 		if (bi) {
 			s->to_write--;
 			bitmap_end = 1;
@@ -3192,7 +3197,6 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
 
 	/* Now to look around and see what can be done */
 	rcu_read_lock();
-	spin_lock_irq(&conf->device_lock);
 	for (i=disks; i--; ) {
 		struct md_rdev *rdev;
 		sector_t first_bad;
@@ -3338,7 +3342,6 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
 				do_recovery = 1;
 		}
 	}
-	spin_unlock_irq(&conf->device_lock);
 	if (test_bit(STRIPE_SYNCING, &sh->state)) {
 		/* If there is a failed device being replaced,
 		 *     we must be recovering.
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 2164021f3b5f..f03fb3395183 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -210,6 +210,7 @@ struct stripe_head {
 	int			disks;		/* disks in stripe */
 	enum check_states	check_state;
 	enum reconstruct_states reconstruct_state;
+	spinlock_t		stripe_lock;
 	/**
 	 * struct stripe_operations
 	 * @target - STRIPE_OP_COMPUTE_BLK target
-- 
cgit v1.2.3


From 3bbae04b126fbd4c191b4167ea46ba9c4da46425 Mon Sep 17 00:00:00 2001
From: Jonathan Brassow
Date: Tue, 31 Jul 2012 10:03:52 +1000
Subject: MD RAID10: Fix compiler warning.

MD RAID10:  Fix compiler warning.

Initialize variable to prevent compiler warning.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid10.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 8da6282254c3..b3d79db35e9b 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -717,7 +717,7 @@ static struct md_rdev *read_balance(struct r10conf *conf,
 	int sectors = r10_bio->sectors;
 	int best_good_sectors;
 	sector_t new_distance, best_dist;
-	struct md_rdev *rdev, *best_rdev;
+	struct md_rdev *best_rdev, *rdev = NULL;
 	int do_balance;
 	int best_slot;
 	struct geom *geo = &conf->geo;
-- 
cgit v1.2.3


From dc280d987f039ef35ac1e59c09b7154b61f385cf Mon Sep 17 00:00:00 2001
From: Jonathan Brassow
Date: Tue, 31 Jul 2012 10:03:52 +1000
Subject: MD RAID10: rename mirror_info structure

MD RAID10: Rename the structure 'mirror_info' to 'raid10_info'

The same structure name ('mirror_info') is used by raid1.  Each of these
structures are defined in there respective header files.  If dm-raid is
to support both RAID1 and RAID10, the header files will be included and
the structure names must not collide.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid10.c | 18 +++++++++---------
 drivers/md/raid10.h |  6 +++---
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index b3d79db35e9b..f9c4baa7964d 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1546,7 +1546,7 @@ static void error(struct mddev *mddev, struct md_rdev *rdev)
 static void print_conf(struct r10conf *conf)
 {
 	int i;
-	struct mirror_info *tmp;
+	struct raid10_info *tmp;
 
 	printk(KERN_DEBUG "RAID10 conf printout:\n");
 	if (!conf) {
@@ -1580,7 +1580,7 @@ static int raid10_spare_active(struct mddev *mddev)
 {
 	int i;
 	struct r10conf *conf = mddev->private;
-	struct mirror_info *tmp;
+	struct raid10_info *tmp;
 	int count = 0;
 	unsigned long flags;
 
@@ -1655,7 +1655,7 @@ static int raid10_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 	else
 		mirror = first;
 	for ( ; mirror <= last ; mirror++) {
-		struct mirror_info *p = &conf->mirrors[mirror];
+		struct raid10_info *p = &conf->mirrors[mirror];
 		if (p->recovery_disabled == mddev->recovery_disabled)
 			continue;
 		if (p->rdev) {
@@ -1709,7 +1709,7 @@ static int raid10_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 	int err = 0;
 	int number = rdev->raid_disk;
 	struct md_rdev **rdevp;
-	struct mirror_info *p = conf->mirrors + number;
+	struct raid10_info *p = conf->mirrors + number;
 
 	print_conf(conf);
 	if (rdev == p->rdev)
@@ -2876,7 +2876,7 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr,
 			sector_t sect;
 			int must_sync;
 			int any_working;
-			struct mirror_info *mirror = &conf->mirrors[i];
+			struct raid10_info *mirror = &conf->mirrors[i];
 
 			if ((mirror->rdev == NULL ||
 			     test_bit(In_sync, &mirror->rdev->flags))
@@ -3388,7 +3388,7 @@ static struct r10conf *setup_conf(struct mddev *mddev)
 		goto out;
 
 	/* FIXME calc properly */
-	conf->mirrors = kzalloc(sizeof(struct mirror_info)*(mddev->raid_disks +
+	conf->mirrors = kzalloc(sizeof(struct raid10_info)*(mddev->raid_disks +
 							    max(0,mddev->delta_disks)),
 				GFP_KERNEL);
 	if (!conf->mirrors)
@@ -3452,7 +3452,7 @@ static int run(struct mddev *mddev)
 {
 	struct r10conf *conf;
 	int i, disk_idx, chunk_size;
-	struct mirror_info *disk;
+	struct raid10_info *disk;
 	struct md_rdev *rdev;
 	sector_t size;
 	sector_t min_offset_diff = 0;
@@ -3805,7 +3805,7 @@ static int raid10_check_reshape(struct mddev *mddev)
 	if (mddev->delta_disks > 0) {
 		/* allocate new 'mirrors' list */
 		conf->mirrors_new = kzalloc(
-			sizeof(struct mirror_info)
+			sizeof(struct raid10_info)
 			*(mddev->raid_disks +
 			  mddev->delta_disks),
 			GFP_KERNEL);
@@ -3930,7 +3930,7 @@ static int raid10_start_reshape(struct mddev *mddev)
 	spin_lock_irq(&conf->device_lock);
 	if (conf->mirrors_new) {
 		memcpy(conf->mirrors_new, conf->mirrors,
-		       sizeof(struct mirror_info)*conf->prev.raid_disks);
+		       sizeof(struct raid10_info)*conf->prev.raid_disks);
 		smp_mb();
 		kfree(conf->mirrors_old); /* FIXME and elsewhere */
 		conf->mirrors_old = conf->mirrors;
diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index 135b1b0a1554..ecdb440b003a 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -1,7 +1,7 @@
 #ifndef _RAID10_H
 #define _RAID10_H
 
-struct mirror_info {
+struct raid10_info {
 	struct md_rdev	*rdev, *replacement;
 	sector_t	head_position;
 	int		recovery_disabled;	/* matches
@@ -13,8 +13,8 @@ struct mirror_info {
 
 struct r10conf {
 	struct mddev		*mddev;
-	struct mirror_info	*mirrors;
-	struct mirror_info	*mirrors_new, *mirrors_old;
+	struct raid10_info	*mirrors;
+	struct raid10_info	*mirrors_new, *mirrors_old;
 	spinlock_t		device_lock;
 
 	/* geometry */
-- 
cgit v1.2.3


From 0eaf822cb3dfcf2a64b2d27f4f6219186adb2695 Mon Sep 17 00:00:00 2001
From: Jonathan Brassow
Date: Tue, 31 Jul 2012 10:03:52 +1000
Subject: MD RAID1: rename mirror_info structure

MD RAID1: Rename the structure 'mirror_info' to 'raid1_info'

The same structure name ('mirror_info') is used by raid10.  Each of these
structures are defined in there respective header files.  If dm-raid is
to support both RAID1 and RAID10, the header files will be included and
the structure names must not collide.  While only one of these structure
names needs to change, this patch adds consistency to the naming of the
structure.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid1.c | 14 +++++++-------
 drivers/md/raid1.h |  4 ++--
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index cacd008d6864..57d6abd497ef 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -873,7 +873,7 @@ do_sync_io:
 static void make_request(struct mddev *mddev, struct bio * bio)
 {
 	struct r1conf *conf = mddev->private;
-	struct mirror_info *mirror;
+	struct raid1_info *mirror;
 	struct r1bio *r1_bio;
 	struct bio *read_bio;
 	int i, disks;
@@ -1364,7 +1364,7 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 	struct r1conf *conf = mddev->private;
 	int err = -EEXIST;
 	int mirror = 0;
-	struct mirror_info *p;
+	struct raid1_info *p;
 	int first = 0;
 	int last = conf->raid_disks - 1;
 	struct request_queue *q = bdev_get_queue(rdev->bdev);
@@ -1433,7 +1433,7 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 	struct r1conf *conf = mddev->private;
 	int err = 0;
 	int number = rdev->raid_disk;
-	struct mirror_info *p = conf->mirrors+ number;
+	struct raid1_info *p = conf->mirrors + number;
 
 	if (rdev != p->rdev)
 		p = conf->mirrors + conf->raid_disks + number;
@@ -2521,7 +2521,7 @@ static struct r1conf *setup_conf(struct mddev *mddev)
 {
 	struct r1conf *conf;
 	int i;
-	struct mirror_info *disk;
+	struct raid1_info *disk;
 	struct md_rdev *rdev;
 	int err = -ENOMEM;
 
@@ -2529,7 +2529,7 @@ static struct r1conf *setup_conf(struct mddev *mddev)
 	if (!conf)
 		goto abort;
 
-	conf->mirrors = kzalloc(sizeof(struct mirror_info)
+	conf->mirrors = kzalloc(sizeof(struct raid1_info)
 				* mddev->raid_disks * 2,
 				 GFP_KERNEL);
 	if (!conf->mirrors)
@@ -2798,7 +2798,7 @@ static int raid1_reshape(struct mddev *mddev)
 	 */
 	mempool_t *newpool, *oldpool;
 	struct pool_info *newpoolinfo;
-	struct mirror_info *newmirrors;
+	struct raid1_info *newmirrors;
 	struct r1conf *conf = mddev->private;
 	int cnt, raid_disks;
 	unsigned long flags;
@@ -2841,7 +2841,7 @@ static int raid1_reshape(struct mddev *mddev)
 		kfree(newpoolinfo);
 		return -ENOMEM;
 	}
-	newmirrors = kzalloc(sizeof(struct mirror_info) * raid_disks * 2,
+	newmirrors = kzalloc(sizeof(struct raid1_info) * raid_disks * 2,
 			     GFP_KERNEL);
 	if (!newmirrors) {
 		kfree(newpoolinfo);
diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h
index 80ded139314c..6b49336575fe 100644
--- a/drivers/md/raid1.h
+++ b/drivers/md/raid1.h
@@ -1,7 +1,7 @@
 #ifndef _RAID1_H
 #define _RAID1_H
 
-struct mirror_info {
+struct raid1_info {
 	struct md_rdev	*rdev;
 	sector_t	head_position;
 };
@@ -24,7 +24,7 @@ struct pool_info {
 
 struct r1conf {
 	struct mddev		*mddev;
-	struct mirror_info	*mirrors;	/* twice 'raid_disks' to
+	struct raid1_info	*mirrors;	/* twice 'raid_disks' to
 						 * allow for replacements.
 						 */
 	int			raid_disks;
-- 
cgit v1.2.3


From 473e87ce485ffcac041f7911b33f0b4cd4d6cf2b Mon Sep 17 00:00:00 2001
From: Jonathan Brassow
Date: Tue, 31 Jul 2012 10:03:52 +1000
Subject: MD: Move macros from raid1*.h to raid1*.c

MD RAID1/RAID10: Move some macros from .h file to .c file

There are three macros (IO_BLOCKED,IO_MADE_GOOD,BIO_SPECIAL) which are defined
in both raid1.h and raid10.h.  They are only used in there respective .c files.
However, if we wish to make RAID10 accessible to the device-mapper RAID
target (dm-raid.c), then we need to move these macros into the .c files where
they are used so that they do not conflict with each other.

The macros from the two files are identical and could be moved into md.h, but
I chose to leave the duplication and have them remain in the personality
files.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid1.c  | 14 ++++++++++++++
 drivers/md/raid1.h  | 14 --------------
 drivers/md/raid10.c | 16 +++++++++++++++-
 drivers/md/raid10.h | 14 --------------
 4 files changed, 29 insertions(+), 29 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 57d6abd497ef..d3d3568b4fb1 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -46,6 +46,20 @@
  */
 #define	NR_RAID1_BIOS 256
 
+/* when we get a read error on a read-only array, we redirect to another
+ * device without failing the first device, or trying to over-write to
+ * correct the read error.  To keep track of bad blocks on a per-bio
+ * level, we store IO_BLOCKED in the appropriate 'bios' pointer
+ */
+#define IO_BLOCKED ((struct bio *)1)
+/* When we successfully write to a known bad-block, we need to remove the
+ * bad-block marking which must be done from process context.  So we record
+ * the success by setting devs[n].bio to IO_MADE_GOOD
+ */
+#define IO_MADE_GOOD ((struct bio *)2)
+
+#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
+
 /* When there are this many requests queue to be written by
  * the raid1 thread, we become 'congested' to provide back-pressure
  * for writeback.
diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h
index 6b49336575fe..4e3613daaea2 100644
--- a/drivers/md/raid1.h
+++ b/drivers/md/raid1.h
@@ -135,20 +135,6 @@ struct r1bio {
 	/* DO NOT PUT ANY NEW FIELDS HERE - bios array is contiguously alloced*/
 };
 
-/* when we get a read error on a read-only array, we redirect to another
- * device without failing the first device, or trying to over-write to
- * correct the read error.  To keep track of bad blocks on a per-bio
- * level, we store IO_BLOCKED in the appropriate 'bios' pointer
- */
-#define IO_BLOCKED ((struct bio *)1)
-/* When we successfully write to a known bad-block, we need to remove the
- * bad-block marking which must be done from process context.  So we record
- * the success by setting bios[n] to IO_MADE_GOOD
- */
-#define IO_MADE_GOOD ((struct bio *)2)
-
-#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
-
 /* bits for r1bio.state */
 #define	R1BIO_Uptodate	0
 #define	R1BIO_IsSync	1
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index f9c4baa7964d..e77acf024055 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -60,7 +60,21 @@
  */
 #define	NR_RAID10_BIOS 256
 
-/* When there are this many requests queue to be written by
+/* when we get a read error on a read-only array, we redirect to another
+ * device without failing the first device, or trying to over-write to
+ * correct the read error.  To keep track of bad blocks on a per-bio
+ * level, we store IO_BLOCKED in the appropriate 'bios' pointer
+ */
+#define IO_BLOCKED ((struct bio *)1)
+/* When we successfully write to a known bad-block, we need to remove the
+ * bad-block marking which must be done from process context.  So we record
+ * the success by setting devs[n].bio to IO_MADE_GOOD
+ */
+#define IO_MADE_GOOD ((struct bio *)2)
+
+#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
+
+/* When there are this many requests queued to be written by
  * the raid10 thread, we become 'congested' to provide back-pressure
  * for writeback.
  */
diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index ecdb440b003a..b0a435869dca 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -123,20 +123,6 @@ struct r10bio {
 	} devs[0];
 };
 
-/* when we get a read error on a read-only array, we redirect to another
- * device without failing the first device, or trying to over-write to
- * correct the read error.  To keep track of bad blocks on a per-bio
- * level, we store IO_BLOCKED in the appropriate 'bios' pointer
- */
-#define IO_BLOCKED ((struct bio*)1)
-/* When we successfully write to a known bad-block, we need to remove the
- * bad-block marking which must be done from process context.  So we record
- * the success by setting devs[n].bio to IO_MADE_GOOD
- */
-#define IO_MADE_GOOD ((struct bio *)2)
-
-#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
-
 /* bits for r10bio.state */
 enum r10bio_state {
 	R10BIO_Uptodate,
-- 
cgit v1.2.3


From cc4d1efdd017083bbcbaf23feb4cdc717fa7dab8 Mon Sep 17 00:00:00 2001
From: Jonathan Brassow
Date: Tue, 31 Jul 2012 10:03:53 +1000
Subject: MD RAID10: Export md_raid10_congested

md/raid10: Export is_congested test.

In similar fashion to commits
	11d8a6e3719519fbc0e2c9d61b6fa931b84bf813
	1ed7242e591af7e233234d483f12d33818b189d9
we export the RAID10 congestion checking function so that dm-raid.c can
make use of it and make use of the personality.  The 'queue' and 'gendisk'
structures will not be available to the MD code when device-mapper sets
up the device, so we conditionalize access to these fields also.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid10.c | 56 ++++++++++++++++++++++++++++++++---------------------
 drivers/md/raid10.h |  3 +++
 2 files changed, 37 insertions(+), 22 deletions(-)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index e77acf024055..e2549deab7c3 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -853,9 +853,8 @@ retry:
 	return rdev;
 }
 
-static int raid10_congested(void *data, int bits)
+int md_raid10_congested(struct mddev *mddev, int bits)
 {
-	struct mddev *mddev = data;
 	struct r10conf *conf = mddev->private;
 	int i, ret = 0;
 
@@ -863,8 +862,6 @@ static int raid10_congested(void *data, int bits)
 	    conf->pending_count >= max_queued_requests)
 		return 1;
 
-	if (mddev_congested(mddev, bits))
-		return 1;
 	rcu_read_lock();
 	for (i = 0;
 	     (i < conf->geo.raid_disks || i < conf->prev.raid_disks)
@@ -880,6 +877,15 @@ static int raid10_congested(void *data, int bits)
 	rcu_read_unlock();
 	return ret;
 }
+EXPORT_SYMBOL_GPL(md_raid10_congested);
+
+static int raid10_congested(void *data, int bits)
+{
+	struct mddev *mddev = data;
+
+	return mddev_congested(mddev, bits) ||
+		md_raid10_congested(mddev, bits);
+}
 
 static void flush_pending_writes(struct r10conf *conf)
 {
@@ -3486,12 +3492,14 @@ static int run(struct mddev *mddev)
 	conf->thread = NULL;
 
 	chunk_size = mddev->chunk_sectors << 9;
-	blk_queue_io_min(mddev->queue, chunk_size);
-	if (conf->geo.raid_disks % conf->geo.near_copies)
-		blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks);
-	else
-		blk_queue_io_opt(mddev->queue, chunk_size *
-				 (conf->geo.raid_disks / conf->geo.near_copies));
+	if (mddev->queue) {
+		blk_queue_io_min(mddev->queue, chunk_size);
+		if (conf->geo.raid_disks % conf->geo.near_copies)
+			blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks);
+		else
+			blk_queue_io_opt(mddev->queue, chunk_size *
+					 (conf->geo.raid_disks / conf->geo.near_copies));
+	}
 
 	rdev_for_each(rdev, mddev) {
 		long long diff;
@@ -3525,8 +3533,9 @@ static int run(struct mddev *mddev)
 		if (first || diff < min_offset_diff)
 			min_offset_diff = diff;
 
-		disk_stack_limits(mddev->gendisk, rdev->bdev,
-				  rdev->data_offset << 9);
+		if (mddev->gendisk)
+			disk_stack_limits(mddev->gendisk, rdev->bdev,
+					  rdev->data_offset << 9);
 
 		disk->head_position = 0;
 	}
@@ -3589,22 +3598,22 @@ static int run(struct mddev *mddev)
 	md_set_array_sectors(mddev, size);
 	mddev->resync_max_sectors = size;
 
-	mddev->queue->backing_dev_info.congested_fn = raid10_congested;
-	mddev->queue->backing_dev_info.congested_data = mddev;
-
-	/* Calculate max read-ahead size.
-	 * We need to readahead at least twice a whole stripe....
-	 * maybe...
-	 */
-	{
+	if (mddev->queue) {
 		int stripe = conf->geo.raid_disks *
 			((mddev->chunk_sectors << 9) / PAGE_SIZE);
+		mddev->queue->backing_dev_info.congested_fn = raid10_congested;
+		mddev->queue->backing_dev_info.congested_data = mddev;
+
+		/* Calculate max read-ahead size.
+		 * We need to readahead at least twice a whole stripe....
+		 * maybe...
+		 */
 		stripe /= conf->geo.near_copies;
 		if (mddev->queue->backing_dev_info.ra_pages < 2 * stripe)
 			mddev->queue->backing_dev_info.ra_pages = 2 * stripe;
+		blk_queue_merge_bvec(mddev->queue, raid10_mergeable_bvec);
 	}
 
-	blk_queue_merge_bvec(mddev->queue, raid10_mergeable_bvec);
 
 	if (md_integrity_register(mddev))
 		goto out_free_conf;
@@ -3655,7 +3664,10 @@ static int stop(struct mddev *mddev)
 	lower_barrier(conf);
 
 	md_unregister_thread(&mddev->thread);
-	blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
+	if (mddev->queue)
+		/* the unplug fn references 'conf'*/
+		blk_sync_queue(mddev->queue);
+
 	if (conf->r10bio_pool)
 		mempool_destroy(conf->r10bio_pool);
 	kfree(conf->mirrors);
diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index b0a435869dca..007c2c68dd83 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -145,4 +145,7 @@ enum r10bio_state {
  */
 	R10BIO_Previous,
 };
+
+extern int md_raid10_congested(struct mddev *mddev, int bits);
+
 #endif
-- 
cgit v1.2.3


From be4d3280b17bc51f23ec6ebb345728f302f80a0c Mon Sep 17 00:00:00 2001
From: Shaohua Li
Date: Tue, 31 Jul 2012 10:03:53 +1000
Subject: md/raid1: make sequential read detection per disk based

Currently the sequential read detection is global wide. It's natural to make it
per disk based, which can improve the detection for concurrent multiple
sequential reads. And next patch will make SSD read balance not use distance
based algorithm, where this change help detect truly sequential read for SSD.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid1.c | 35 +++++++----------------------------
 drivers/md/raid1.h | 11 +++++------
 2 files changed, 12 insertions(+), 34 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index d3d3568b4fb1..fb96c0c2db40 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -497,9 +497,8 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	const sector_t this_sector = r1_bio->sector;
 	int sectors;
 	int best_good_sectors;
-	int start_disk;
 	int best_disk;
-	int i;
+	int disk;
 	sector_t best_dist;
 	struct md_rdev *rdev;
 	int choose_first;
@@ -517,23 +516,16 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	best_good_sectors = 0;
 
 	if (conf->mddev->recovery_cp < MaxSector &&
-	    (this_sector + sectors >= conf->next_resync)) {
+	    (this_sector + sectors >= conf->next_resync))
 		choose_first = 1;
-		start_disk = 0;
-	} else {
+	else
 		choose_first = 0;
-		start_disk = conf->last_used;
-	}
 
-	for (i = 0 ; i < conf->raid_disks * 2 ; i++) {
+	for (disk = 0 ; disk < conf->raid_disks * 2 ; disk++) {
 		sector_t dist;
 		sector_t first_bad;
 		int bad_sectors;
 
-		int disk = start_disk + i;
-		if (disk >= conf->raid_disks * 2)
-			disk -= conf->raid_disks * 2;
-
 		rdev = rcu_dereference(conf->mirrors[disk].rdev);
 		if (r1_bio->bios[disk] == IO_BLOCKED
 		    || rdev == NULL
@@ -594,7 +586,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 		dist = abs(this_sector - conf->mirrors[disk].head_position);
 		if (choose_first
 		    /* Don't change to another disk for sequential reads */
-		    || conf->next_seq_sect == this_sector
+		    || conf->mirrors[disk].next_seq_sect == this_sector
 		    || dist == 0
 		    /* If device is idle, use it */
 		    || atomic_read(&rdev->nr_pending) == 0) {
@@ -620,8 +612,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 			goto retry;
 		}
 		sectors = best_good_sectors;
-		conf->next_seq_sect = this_sector + sectors;
-		conf->last_used = best_disk;
+		conf->mirrors[best_disk].next_seq_sect = this_sector + sectors;
 	}
 	rcu_read_unlock();
 	*max_sectors = sectors;
@@ -2599,7 +2590,6 @@ static struct r1conf *setup_conf(struct mddev *mddev)
 	conf->recovery_disabled = mddev->recovery_disabled - 1;
 
 	err = -EIO;
-	conf->last_used = -1;
 	for (i = 0; i < conf->raid_disks * 2; i++) {
 
 		disk = conf->mirrors + i;
@@ -2625,19 +2615,9 @@ static struct r1conf *setup_conf(struct mddev *mddev)
 			if (disk->rdev &&
 			    (disk->rdev->saved_raid_disk < 0))
 				conf->fullsync = 1;
-		} else if (conf->last_used < 0)
-			/*
-			 * The first working device is used as a
-			 * starting point to read balancing.
-			 */
-			conf->last_used = i;
+		}
 	}
 
-	if (conf->last_used < 0) {
-		printk(KERN_ERR "md/raid1:%s: no operational mirrors\n",
-		       mdname(mddev));
-		goto abort;
-	}
 	err = -ENOMEM;
 	conf->thread = md_register_thread(raid1d, mddev, "raid1");
 	if (!conf->thread) {
@@ -2894,7 +2874,6 @@ static int raid1_reshape(struct mddev *mddev)
 	conf->raid_disks = mddev->raid_disks = raid_disks;
 	mddev->delta_disks = 0;
 
-	conf->last_used = 0; /* just make sure it is in-range */
 	lower_barrier(conf);
 
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h
index 4e3613daaea2..3770b4a27662 100644
--- a/drivers/md/raid1.h
+++ b/drivers/md/raid1.h
@@ -4,6 +4,11 @@
 struct raid1_info {
 	struct md_rdev	*rdev;
 	sector_t	head_position;
+
+	/* When choose the best device for a read (read_balance())
+	 * we try to keep sequential reads one the same device
+	 */
+	sector_t	next_seq_sect;
 };
 
 /*
@@ -29,12 +34,6 @@ struct r1conf {
 						 */
 	int			raid_disks;
 
-	/* When choose the best device for a read (read_balance())
-	 * we try to keep sequential reads one the same device
-	 * using 'last_used' and 'next_seq_sect'
-	 */
-	int			last_used;
-	sector_t		next_seq_sect;
 	/* During resync, read_balancing is only allowed on the part
 	 * of the array that has been resynced.  'next_resync' tells us
 	 * where that is.
-- 
cgit v1.2.3


From 9dedf60313fa4dddfd5b9b226a0ef12a512bf9dc Mon Sep 17 00:00:00 2001
From: Shaohua Li
Date: Tue, 31 Jul 2012 10:03:53 +1000
Subject: md/raid1: read balance chooses idlest disk for SSD

SSD hasn't spindle, distance between requests means nothing. And the original
distance based algorithm sometimes can cause severe performance issue for SSD
raid.

Considering two thread groups, one accesses file A, the other access file B.
The first group will access one disk and the second will access the other disk,
because requests are near from one group and far between groups. In this case,
read balance might keep one disk very busy but the other relative idle.  For
SSD, we should try best to distribute requests to as many disks as possible.
There isn't spindle move penality anyway.

With below patch, I can see more than 50% throughput improvement sometimes
depending on workloads.

The only exception is small requests can be merged to a big request which
typically can drive higher throughput for SSD too. Such small requests are
sequential reads. Unlike hard disk, sequential read which can't be merged (for
example direct IO, or read without readahead) can be ignored for SSD. Again
there is no spindle move penality. readahead dispatches small requests and such
requests can be merged.

Last patch can help detect sequential read well, at least if concurrent read
number isn't greater than raid disk number. In that case, distance based
algorithm doesn't work well too.

V2: For hard disk and SSD mixed raid, doesn't use distance based algorithm for
random IO too. This makes the algorithm generic for raid with SSD.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid1.c | 34 +++++++++++++++++++++++++++++++---
 1 file changed, 31 insertions(+), 3 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index fb96c0c2db40..d9869f25aa75 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -497,9 +497,11 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	const sector_t this_sector = r1_bio->sector;
 	int sectors;
 	int best_good_sectors;
-	int best_disk;
+	int best_disk, best_dist_disk, best_pending_disk;
+	int has_nonrot_disk;
 	int disk;
 	sector_t best_dist;
+	unsigned int min_pending;
 	struct md_rdev *rdev;
 	int choose_first;
 
@@ -512,8 +514,12 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
  retry:
 	sectors = r1_bio->sectors;
 	best_disk = -1;
+	best_dist_disk = -1;
 	best_dist = MaxSector;
+	best_pending_disk = -1;
+	min_pending = UINT_MAX;
 	best_good_sectors = 0;
+	has_nonrot_disk = 0;
 
 	if (conf->mddev->recovery_cp < MaxSector &&
 	    (this_sector + sectors >= conf->next_resync))
@@ -525,6 +531,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 		sector_t dist;
 		sector_t first_bad;
 		int bad_sectors;
+		unsigned int pending;
 
 		rdev = rcu_dereference(conf->mirrors[disk].rdev);
 		if (r1_bio->bios[disk] == IO_BLOCKED
@@ -583,22 +590,43 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 		} else
 			best_good_sectors = sectors;
 
+		has_nonrot_disk |= blk_queue_nonrot(bdev_get_queue(rdev->bdev));
+		pending = atomic_read(&rdev->nr_pending);
 		dist = abs(this_sector - conf->mirrors[disk].head_position);
 		if (choose_first
 		    /* Don't change to another disk for sequential reads */
 		    || conf->mirrors[disk].next_seq_sect == this_sector
 		    || dist == 0
 		    /* If device is idle, use it */
-		    || atomic_read(&rdev->nr_pending) == 0) {
+		    || pending == 0) {
 			best_disk = disk;
 			break;
 		}
+
+		if (min_pending > pending) {
+			min_pending = pending;
+			best_pending_disk = disk;
+		}
+
 		if (dist < best_dist) {
 			best_dist = dist;
-			best_disk = disk;
+			best_dist_disk = disk;
 		}
 	}
 
+	/*
+	 * If all disks are rotational, choose the closest disk. If any disk is
+	 * non-rotational, choose the disk with less pending request even the
+	 * disk is rotational, which might/might not be optimal for raids with
+	 * mixed ratation/non-rotational disks depending on workload.
+	 */
+	if (best_disk == -1) {
+		if (has_nonrot_disk)
+			best_disk = best_pending_disk;
+		else
+			best_disk = best_dist_disk;
+	}
+
 	if (best_disk >= 0) {
 		rdev = rcu_dereference(conf->mirrors[best_disk].rdev);
 		if (!rdev)
-- 
cgit v1.2.3


From 12cee5a8a29e7263e39953f1d941f723c617ca5f Mon Sep 17 00:00:00 2001
From: Shaohua Li
Date: Tue, 31 Jul 2012 10:03:53 +1000
Subject: md/raid1: prevent merging too large request

For SSD, if request size exceeds specific value (optimal io size), request size
isn't important for bandwidth. In such condition, if making request size bigger
will cause some disks idle, the total throughput will actually drop. A good
example is doing a readahead in a two-disk raid1 setup.

So when should we split big requests? We absolutly don't want to split big
request to very small requests. Even in SSD, big request transfer is more
efficient. This patch only considers request with size above optimal io size.

If all disks are busy, is it worth doing a split? Say optimal io size is 16k,
two requests 32k and two disks. We can let each disk run one 32k request, or
split the requests to 4 16k requests and each disk runs two. It's hard to say
which case is better, depending on hardware.

So only consider case where there are idle disks. For readahead, split is
always better in this case. And in my test, below patch can improve > 30%
thoughput. Hmm, not 100%, because disk isn't 100% busy.

Such case can happen not just in readahead, for example, in directio. But I
suppose directio usually will have bigger IO depth and make all disks busy, so
I ignored it.

Note: if the raid uses any hard disk, we don't prevent merging. That will make
performace worse.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid1.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++-------
 drivers/md/raid1.h |  1 +
 2 files changed, 50 insertions(+), 7 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index d9869f25aa75..7aa958ed2847 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -504,6 +504,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	unsigned int min_pending;
 	struct md_rdev *rdev;
 	int choose_first;
+	int choose_next_idle;
 
 	rcu_read_lock();
 	/*
@@ -520,6 +521,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	min_pending = UINT_MAX;
 	best_good_sectors = 0;
 	has_nonrot_disk = 0;
+	choose_next_idle = 0;
 
 	if (conf->mddev->recovery_cp < MaxSector &&
 	    (this_sector + sectors >= conf->next_resync))
@@ -532,6 +534,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 		sector_t first_bad;
 		int bad_sectors;
 		unsigned int pending;
+		bool nonrot;
 
 		rdev = rcu_dereference(conf->mirrors[disk].rdev);
 		if (r1_bio->bios[disk] == IO_BLOCKED
@@ -590,18 +593,52 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 		} else
 			best_good_sectors = sectors;
 
-		has_nonrot_disk |= blk_queue_nonrot(bdev_get_queue(rdev->bdev));
+		nonrot = blk_queue_nonrot(bdev_get_queue(rdev->bdev));
+		has_nonrot_disk |= nonrot;
 		pending = atomic_read(&rdev->nr_pending);
 		dist = abs(this_sector - conf->mirrors[disk].head_position);
-		if (choose_first
-		    /* Don't change to another disk for sequential reads */
-		    || conf->mirrors[disk].next_seq_sect == this_sector
-		    || dist == 0
-		    /* If device is idle, use it */
-		    || pending == 0) {
+		if (choose_first) {
 			best_disk = disk;
 			break;
 		}
+		/* Don't change to another disk for sequential reads */
+		if (conf->mirrors[disk].next_seq_sect == this_sector
+		    || dist == 0) {
+			int opt_iosize = bdev_io_opt(rdev->bdev) >> 9;
+			struct raid1_info *mirror = &conf->mirrors[disk];
+
+			best_disk = disk;
+			/*
+			 * If buffered sequential IO size exceeds optimal
+			 * iosize, check if there is idle disk. If yes, choose
+			 * the idle disk. read_balance could already choose an
+			 * idle disk before noticing it's a sequential IO in
+			 * this disk. This doesn't matter because this disk
+			 * will idle, next time it will be utilized after the
+			 * first disk has IO size exceeds optimal iosize. In
+			 * this way, iosize of the first disk will be optimal
+			 * iosize at least. iosize of the second disk might be
+			 * small, but not a big deal since when the second disk
+			 * starts IO, the first disk is likely still busy.
+			 */
+			if (nonrot && opt_iosize > 0 &&
+			    mirror->seq_start != MaxSector &&
+			    mirror->next_seq_sect > opt_iosize &&
+			    mirror->next_seq_sect - opt_iosize >=
+			    mirror->seq_start) {
+				choose_next_idle = 1;
+				continue;
+			}
+			break;
+		}
+		/* If device is idle, use it */
+		if (pending == 0) {
+			best_disk = disk;
+			break;
+		}
+
+		if (choose_next_idle)
+			continue;
 
 		if (min_pending > pending) {
 			min_pending = pending;
@@ -640,6 +677,10 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 			goto retry;
 		}
 		sectors = best_good_sectors;
+
+		if (conf->mirrors[best_disk].next_seq_sect != this_sector)
+			conf->mirrors[best_disk].seq_start = this_sector;
+
 		conf->mirrors[best_disk].next_seq_sect = this_sector + sectors;
 	}
 	rcu_read_unlock();
@@ -2605,6 +2646,7 @@ static struct r1conf *setup_conf(struct mddev *mddev)
 			mddev->merge_check_needed = 1;
 
 		disk->head_position = 0;
+		disk->seq_start = MaxSector;
 	}
 	conf->raid_disks = mddev->raid_disks;
 	conf->mddev = mddev;
diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h
index 3770b4a27662..0ff3715fb7eb 100644
--- a/drivers/md/raid1.h
+++ b/drivers/md/raid1.h
@@ -9,6 +9,7 @@ struct raid1_info {
 	 * we try to keep sequential reads one the same device
 	 */
 	sector_t	next_seq_sect;
+	sector_t	seq_start;
 };
 
 /*
-- 
cgit v1.2.3


From 3f9e7c140e4c4e75bdeeb8df46dd40e49386c978 Mon Sep 17 00:00:00 2001
From: majianpeng
Date: Tue, 31 Jul 2012 10:04:21 +1000
Subject: raid5: Add R5_ReadNoMerge flag which prevent bio from merging at
 block layer

Because bios will merge at block-layer,so bios-error may caused by other
bio which be merged into to the same request.
Using this flag,it will find exactly error-sector and not do redundant
operation like re-write and re-read.

V0->V1:Using REQ_FLUSH instead REQ_NOMERGE avoid bio merging at block
layer.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid5.c | 14 ++++++++++++--
 drivers/md/raid5.h |  1 +
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c2192a2907e4..29493982dbf5 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -653,6 +653,9 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)
 			else
 				bi->bi_sector = (sh->sector
 						 + rdev->data_offset);
+			if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags))
+				bi->bi_rw |= REQ_FLUSH;
+
 			bi->bi_flags = 1 << BIO_UPTODATE;
 			bi->bi_idx = 0;
 			bi->bi_io_vec[0].bv_len = STRIPE_SIZE;
@@ -1750,7 +1753,9 @@ static void raid5_end_read_request(struct bio * bi, int error)
 			atomic_add(STRIPE_SECTORS, &rdev->corrected_errors);
 			clear_bit(R5_ReadError, &sh->dev[i].flags);
 			clear_bit(R5_ReWrite, &sh->dev[i].flags);
-		}
+		} else if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags))
+			clear_bit(R5_ReadNoMerge, &sh->dev[i].flags);
+
 		if (atomic_read(&rdev->read_errors))
 			atomic_set(&rdev->read_errors, 0);
 	} else {
@@ -1795,7 +1800,11 @@ static void raid5_end_read_request(struct bio * bi, int error)
 		else
 			retry = 1;
 		if (retry)
-			set_bit(R5_ReadError, &sh->dev[i].flags);
+			if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) {
+				set_bit(R5_ReadError, &sh->dev[i].flags);
+				clear_bit(R5_ReadNoMerge, &sh->dev[i].flags);
+			} else
+				set_bit(R5_ReadNoMerge, &sh->dev[i].flags);
 		else {
 			clear_bit(R5_ReadError, &sh->dev[i].flags);
 			clear_bit(R5_ReWrite, &sh->dev[i].flags);
@@ -4515,6 +4524,7 @@ static int  retry_aligned_read(struct r5conf *conf, struct bio *raid_bio)
 			return handled;
 		}
 
+		set_bit(R5_ReadNoMerge, &sh->dev[dd_idx].flags);
 		handle_stripe(sh);
 		release_stripe(sh);
 		handled++;
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index f03fb3395183..61dbb615c30b 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -274,6 +274,7 @@ enum r5dev_flags {
 	R5_Wantwrite,
 	R5_Overlap,	/* There is a pending overlapping request
 			 * on this block */
+	R5_ReadNoMerge, /* prevent bio from merging in block-layer */
 	R5_ReadError,	/* seen a read error here recently */
 	R5_ReWrite,	/* have tried to over-write the readerror */
 
-- 
cgit v1.2.3


From 90cf195d9bcb4bf70e8b6df5073b05164b279ba0 Mon Sep 17 00:00:00 2001
From: NeilBrown
Date: Tue, 31 Jul 2012 10:04:55 +1000
Subject: md: remove duplicated test on ->openers when calling do_md_stop()

do_md_stop tests mddev->openers while holding ->open_mutex,
and fails if this count is too high.
So callers do not need to check mddev->openers and doing so isn't
very meaningful as they don't hold ->open_mutex so the number could
change.

So remove the unnecessary tests on mddev->openers.
These are not called often enough for there to be any gain in
an early test on ->open_mutex to avoid the need for a slightly more
costly mutex_lock call.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index d5ab4493c8be..f6c46109b071 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3942,17 +3942,13 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len)
 		break;
 	case clear:
 		/* stopping an active array */
-		if (atomic_read(&mddev->openers) > 0)
-			return -EBUSY;
 		err = do_md_stop(mddev, 0, NULL);
 		break;
 	case inactive:
 		/* stopping an active array */
-		if (mddev->pers) {
-			if (atomic_read(&mddev->openers) > 0)
-				return -EBUSY;
+		if (mddev->pers)
 			err = do_md_stop(mddev, 2, NULL);
-		} else
+		else
 			err = 0; /* already inactive */
 		break;
 	case suspended:
-- 
cgit v1.2.3


From b7219ccb33aa0df9949a60c68b5e9f712615e56f Mon Sep 17 00:00:00 2001
From: NeilBrown
Date: Tue, 31 Jul 2012 10:05:34 +1000
Subject: md/raid1: don't abort a resync on the first badblock.

If a resync of a RAID1 array with 2 devices finds a known bad block
one device it will neither read from, or write to, that device for
this block offset.
So there will be one read_target (The other device) and zero write
targets.
This condition causes md/raid1 to abort the resync assuming that it
has finished - without known bad blocks this would be true.

When there are no write targets because of the presence of bad blocks
we should only skip over the area covered by the bad block.
RAID10 already gets this right, raid1 doesn't.  Or didn't.

As this can cause a 'sync' to abort early and appear to have succeeded
it could lead to some data corruption, so it suitable for -stable.

Cc: stable@vger.kernel.org
Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid1.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 7aa958ed2847..d2361b162de5 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -2502,7 +2502,10 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr, int *skipp
 		/* There is nowhere to write, so all non-sync
 		 * drives must be failed - so we are finished
 		 */
-		sector_t rv = max_sector - sector_nr;
+		sector_t rv;
+		if (min_bad > 0)
+			max_sector = sector_nr + min_bad;
+		rv = max_sector - sector_nr;
 		*skipped = 1;
 		put_buf(r1_bio);
 		return rv;
-- 
cgit v1.2.3


From 895e3c5c58a80bb9e4e05d9ac38b4f30e0f97d80 Mon Sep 17 00:00:00 2001
From: majianpeng
Date: Tue, 31 Jul 2012 10:05:44 +1000
Subject: md/raid5: For odirect-write performance, do not set
 STRIPE_PREREAD_ACTIVE.

'sync' writes set both REQ_SYNC and REQ_NOIDLE.
O_DIRECT writes set REQ_SYNC but not REQ_NOIDLE.

We currently assume that a REQ_SYNC request will not be followed by
more requests and so set STRIPE_PREREAD_ACTIVE to expedite the
request.
This is appropriate for sync requests, but not for O_DIRECT requests.

So make the setting of STRIPE_PREREAD_ACTIVE conditional on REQ_NOIDLE
rather than REQ_SYNC.  This is consistent with the documented meaning
of REQ_NOIDLE:

        __REQ_NOIDLE,           /* don't anticipate more IO after this one */

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid5.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 29493982dbf5..259f519814ca 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4135,7 +4135,7 @@ static void make_request(struct mddev *mddev, struct bio * bi)
 			finish_wait(&conf->wait_for_overlap, &w);
 			set_bit(STRIPE_HANDLE, &sh->state);
 			clear_bit(STRIPE_DELAYED, &sh->state);
-			if ((bi->bi_rw & REQ_SYNC) &&
+			if ((bi->bi_rw & REQ_NOIDLE) &&
 			    !test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
 				atomic_inc(&conf->preread_active_stripes);
 			mddev_check_plugged(mddev);
-- 
cgit v1.2.3


From d57368afe63b3b7b45ce6c2b8c5276417935be2f Mon Sep 17 00:00:00 2001
From: Alexander Lyakas
Date: Tue, 17 Jul 2012 13:17:55 +0300
Subject: md/RAID1: Add missing case for attempting to repair known bad blocks.

When doing resync or repair, attempt to correct bad blocks, according
to WriteErrorSeen policy

Signed-off-by: Alex Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid1.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index d2361b162de5..197f62681db5 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -2445,6 +2445,18 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr, int *skipp
 				bio->bi_rw = READ;
 				bio->bi_end_io = end_sync_read;
 				read_targets++;
+			} else if (!test_bit(WriteErrorSeen, &rdev->flags) &&
+				test_bit(MD_RECOVERY_SYNC, &mddev->recovery) &&
+				!test_bit(MD_RECOVERY_CHECK, &mddev->recovery)) {
+				/*
+				 * The device is suitable for reading (InSync),
+				 * but has bad block(s) here. Let's try to correct them,
+				 * if we are doing resync or repair. Otherwise, leave
+				 * this device alone for this sync request.
+				 */
+				bio->bi_rw = WRITE;
+				bio->bi_end_io = end_sync_write;
+				write_targets++;
 			}
 		}
 		if (bio->bi_end_io) {
-- 
cgit v1.2.3


From 63f33b8dda88923487004b20fba825486d009e7b Mon Sep 17 00:00:00 2001
From: Jonathan Brassow
Date: Tue, 31 Jul 2012 21:44:26 -0500
Subject: DM RAID: Add support for MD RAID10

Support the MD RAID10 personality through dm-raid.c

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 Documentation/device-mapper/dm-raid.txt | 26 +++++++++
 drivers/md/dm-raid.c                    | 95 +++++++++++++++++++++++++++++++--
 2 files changed, 116 insertions(+), 5 deletions(-)

diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
index 946c73342cde..1c1844957166 100644
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@@ -27,6 +27,10 @@ The target is named "raid" and it accepts the following parameters:
 		- rotating parity N (right-to-left) with data restart
   raid6_nc	RAID6 N continue
 		- rotating parity N (right-to-left) with data continuation
+  raid10        Various RAID10 inspired algorithms chosen by additional params
+		- RAID10: Striped Mirrors (aka 'Striping on top of mirrors')
+		- RAID1E: Integrated Adjacent Stripe Mirroring
+		-  and other similar RAID10 variants
 
   Reference: Chapter 4 of
   http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf
@@ -59,6 +63,28 @@ The target is named "raid" and it accepts the following parameters:
 		logical size of the array.  The bitmap records the device
 		synchronisation state for each region.
 
+        [raid10_copies   <# copies>]
+        [raid10_format   near]
+		These two options are used to alter the default layout of
+		a RAID10 configuration.  The number of copies is can be
+		specified, but the default is 2.  There are other variations
+		to how the copies are laid down - the default and only current
+		option is "near".  Near copies are what most people think of
+		with respect to mirroring.  If these options are left
+		unspecified, or 'raid10_copies 2' and/or 'raid10_format near'
+		are given, then the layouts for 2, 3 and 4 devices are:
+		2 drives         3 drives          4 drives
+		--------         ----------        --------------
+		A1  A1           A1  A1  A2        A1  A1  A2  A2
+		A2  A2           A2  A3  A3        A3  A3  A4  A4
+		A3  A3           A4  A4  A5        A5  A5  A6  A6
+		A4  A4           A5  A6  A6        A7  A7  A8  A8
+		..  ..           ..  ..  ..        ..  ..  ..  ..
+		The 2-device layout is equivalent 2-way RAID1.  The 4-device
+		layout is what a traditional RAID10 would look like.  The
+		3-device layout is what might be called a 'RAID1E - Integrated
+		Adjacent Stripe Mirroring'.
+
 <#raid_devs>: The number of devices composing the array.
 	Each device consists of two entries.  The first is the device
 	containing the metadata (if any); the second is the one containing the
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index f4275a8e860c..691b3c59088e 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -11,6 +11,7 @@
 #include "md.h"
 #include "raid1.h"
 #include "raid5.h"
+#include "raid10.h"
 #include "bitmap.h"
 
 #include <linux/device-mapper.h>
@@ -52,7 +53,10 @@ struct raid_dev {
 #define DMPF_MAX_RECOVERY_RATE 0x20
 #define DMPF_MAX_WRITE_BEHIND  0x40
 #define DMPF_STRIPE_CACHE      0x80
-#define DMPF_REGION_SIZE       0X100
+#define DMPF_REGION_SIZE       0x100
+#define DMPF_RAID10_COPIES     0x200
+#define DMPF_RAID10_FORMAT     0x400
+
 struct raid_set {
 	struct dm_target *ti;
 
@@ -76,6 +80,7 @@ static struct raid_type {
 	const unsigned algorithm;	/* RAID algorithm. */
 } raid_types[] = {
 	{"raid1",    "RAID1 (mirroring)",               0, 2, 1, 0 /* NONE */},
+	{"raid10",   "RAID10 (striped mirrors)",        0, 2, 10, UINT_MAX /* Varies */},
 	{"raid4",    "RAID4 (dedicated parity disk)",	1, 2, 5, ALGORITHM_PARITY_0},
 	{"raid5_la", "RAID5 (left asymmetric)",		1, 2, 5, ALGORITHM_LEFT_ASYMMETRIC},
 	{"raid5_ra", "RAID5 (right asymmetric)",	1, 2, 5, ALGORITHM_RIGHT_ASYMMETRIC},
@@ -86,6 +91,17 @@ static struct raid_type {
 	{"raid6_nc", "RAID6 (N continue)",		2, 4, 6, ALGORITHM_ROTATING_N_CONTINUE}
 };
 
+static unsigned raid10_md_layout_to_copies(int layout)
+{
+	return layout & 0xFF;
+}
+
+static int raid10_format_to_md_layout(char *format, unsigned copies)
+{
+	/* 1 "far" copy, and 'copies' "near" copies */
+	return (1 << 8) | (copies & 0xFF);
+}
+
 static struct raid_type *get_raid_type(char *name)
 {
 	int i;
@@ -339,10 +355,16 @@ static int validate_region_size(struct raid_set *rs, unsigned long region_size)
  *    [max_write_behind <sectors>]	See '-write-behind=' (man mdadm)
  *    [stripe_cache <sectors>]		Stripe cache size for higher RAIDs
  *    [region_size <sectors>]           Defines granularity of bitmap
+ *
+ * RAID10-only options:
+ *    [raid10_copies <# copies>]        Number of copies.  (Default: 2)
+ *    [raid10_format <near>]            Layout algorithm.  (Default: near)
  */
 static int parse_raid_params(struct raid_set *rs, char **argv,
 			     unsigned num_raid_params)
 {
+	char *raid10_format = "near";
+	unsigned raid10_copies = 2;
 	unsigned i, rebuild_cnt = 0;
 	unsigned long value, region_size = 0;
 	sector_t sectors_per_dev = rs->ti->len;
@@ -416,11 +438,28 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
 		}
 
 		key = argv[i++];
+
+		/* Parameters that take a string value are checked here. */
+		if (!strcasecmp(key, "raid10_format")) {
+			if (rs->raid_type->level != 10) {
+				rs->ti->error = "'raid10_format' is an invalid parameter for this RAID type";
+				return -EINVAL;
+			}
+			if (strcmp("near", argv[i])) {
+				rs->ti->error = "Invalid 'raid10_format' value given";
+				return -EINVAL;
+			}
+			raid10_format = argv[i];
+			rs->print_flags |= DMPF_RAID10_FORMAT;
+			continue;
+		}
+
 		if (strict_strtoul(argv[i], 10, &value) < 0) {
 			rs->ti->error = "Bad numerical argument given in raid params";
 			return -EINVAL;
 		}
 
+		/* Parameters that take a numeric value are checked here */
 		if (!strcasecmp(key, "rebuild")) {
 			rebuild_cnt++;
 
@@ -439,6 +478,7 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
 					return -EINVAL;
 				}
 				break;
+			case 10:
 			default:
 				DMERR("The rebuild parameter is not supported for %s", rs->raid_type->name);
 				rs->ti->error = "Rebuild not supported for this RAID type";
@@ -495,7 +535,8 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
 			 */
 			value /= 2;
 
-			if (rs->raid_type->level < 5) {
+			if ((rs->raid_type->level != 5) &&
+			    (rs->raid_type->level != 6)) {
 				rs->ti->error = "Inappropriate argument: stripe_cache";
 				return -EINVAL;
 			}
@@ -520,6 +561,14 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
 		} else if (!strcasecmp(key, "region_size")) {
 			rs->print_flags |= DMPF_REGION_SIZE;
 			region_size = value;
+		} else if (!strcasecmp(key, "raid10_copies") &&
+			   (rs->raid_type->level == 10)) {
+			if ((value < 2) || (value > 0xFF)) {
+				rs->ti->error = "Bad value for 'raid10_copies'";
+				return -EINVAL;
+			}
+			rs->print_flags |= DMPF_RAID10_COPIES;
+			raid10_copies = value;
 		} else {
 			DMERR("Unable to parse RAID parameter: %s", key);
 			rs->ti->error = "Unable to parse RAID parameters";
@@ -538,8 +587,22 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
 	if (dm_set_target_max_io_len(rs->ti, max_io_len))
 		return -EINVAL;
 
-	if ((rs->raid_type->level > 1) &&
-	    sector_div(sectors_per_dev, (rs->md.raid_disks - rs->raid_type->parity_devs))) {
+	if (rs->raid_type->level == 10) {
+		if (raid10_copies > rs->md.raid_disks) {
+			rs->ti->error = "Not enough devices to satisfy specification";
+			return -EINVAL;
+		}
+
+		/* (Len * #mirrors) / #devices */
+		sectors_per_dev = rs->ti->len * raid10_copies;
+		sector_div(sectors_per_dev, rs->md.raid_disks);
+
+		rs->md.layout = raid10_format_to_md_layout(raid10_format,
+							   raid10_copies);
+		rs->md.new_layout = rs->md.layout;
+	} else if ((rs->raid_type->level > 1) &&
+		   sector_div(sectors_per_dev,
+			      (rs->md.raid_disks - rs->raid_type->parity_devs))) {
 		rs->ti->error = "Target length not divisible by number of data devices";
 		return -EINVAL;
 	}
@@ -566,6 +629,9 @@ static int raid_is_congested(struct dm_target_callbacks *cb, int bits)
 	if (rs->raid_type->level == 1)
 		return md_raid1_congested(&rs->md, bits);
 
+	if (rs->raid_type->level == 10)
+		return md_raid10_congested(&rs->md, bits);
+
 	return md_raid5_congested(&rs->md, bits);
 }
 
@@ -884,6 +950,9 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
 	case 6:
 		redundancy = rs->raid_type->parity_devs;
 		break;
+	case 10:
+		redundancy = raid10_md_layout_to_copies(mddev->layout) - 1;
+		break;
 	default:
 		ti->error = "Unknown RAID type";
 		return -EINVAL;
@@ -1049,12 +1118,19 @@ static int raid_ctr(struct dm_target *ti, unsigned argc, char **argv)
 		goto bad;
 	}
 
+	if (ti->len != rs->md.array_sectors) {
+		ti->error = "Array size does not match requested target length";
+		ret = -EINVAL;
+		goto size_mismatch;
+	}
 	rs->callbacks.congested_fn = raid_is_congested;
 	dm_table_add_target_callbacks(ti->table, &rs->callbacks);
 
 	mddev_suspend(&rs->md);
 	return 0;
 
+size_mismatch:
+	md_stop(&rs->md);
 bad:
 	context_free(rs);
 
@@ -1203,6 +1279,13 @@ static int raid_status(struct dm_target *ti, status_type_t type,
 			DMEMIT(" region_size %lu",
 			       rs->md.bitmap_info.chunksize >> 9);
 
+		if (rs->print_flags & DMPF_RAID10_COPIES)
+			DMEMIT(" raid10_copies %u",
+			       raid10_md_layout_to_copies(rs->md.layout));
+
+		if (rs->print_flags & DMPF_RAID10_FORMAT)
+			DMEMIT(" raid10_format near");
+
 		DMEMIT(" %d", rs->md.raid_disks);
 		for (i = 0; i < rs->md.raid_disks; i++) {
 			if (rs->dev[i].meta_dev)
@@ -1277,7 +1360,7 @@ static void raid_resume(struct dm_target *ti)
 
 static struct target_type raid_target = {
 	.name = "raid",
-	.version = {1, 2, 0},
+	.version = {1, 3, 0},
 	.module = THIS_MODULE,
 	.ctr = raid_ctr,
 	.dtr = raid_dtr,
@@ -1304,6 +1387,8 @@ module_init(dm_raid_init);
 module_exit(dm_raid_exit);
 
 MODULE_DESCRIPTION(DM_NAME " raid4/5/6 target");
+MODULE_ALIAS("dm-raid1");
+MODULE_ALIAS("dm-raid10");
 MODULE_ALIAS("dm-raid4");
 MODULE_ALIAS("dm-raid5");
 MODULE_ALIAS("dm-raid6");
-- 
cgit v1.2.3