From 2fb270f3212a1e6a73f86f76c85caee93aae4386 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 9 Feb 2011 08:21:02 +0000 Subject: x86: Fix section mismatch in LAPIC initialization Additionally doing things conditionally upon smp_processor_id() being zero is generally a bad idea, as this means CPU 0 cannot be offlined and brought back online later again. While there may be other places where this is done, I think adding more of those should be avoided so that some day SMP can really become "symmetrical". Signed-off-by: Jan Beulich Cc: Cyrill Gorcunov LKML-Reference: <4D525C7E0200007800030EE1@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 1 + arch/x86/kernel/apic/apic.c | 9 +++++++-- arch/x86/kernel/smpboot.c | 4 ++-- 3 files changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 5e3969c36d7f..3c896946f4cc 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -233,6 +233,7 @@ extern void sync_Arb_IDs(void); extern void init_bsp_APIC(void); extern void setup_local_APIC(void); extern void end_local_APIC_setup(void); +extern void bsp_end_local_APIC_setup(void); extern void init_apic_mappings(void); void register_lapic_address(unsigned long address); extern void setup_boot_APIC_clock(void); diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 06c196d7e59c..76b96d74978a 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1381,12 +1381,17 @@ void __cpuinit end_local_APIC_setup(void) #endif apic_pm_activate(); +} + +void __init bsp_end_local_APIC_setup(void) +{ + end_local_APIC_setup(); /* * Now that local APIC setup is completed for BP, configure the fault * handling for interrupt remapping. */ - if (!smp_processor_id() && intr_remapping_enabled) + if (intr_remapping_enabled) enable_drhd_fault_handling(); } @@ -1756,7 +1761,7 @@ int __init APIC_init_uniprocessor(void) enable_IO_APIC(); #endif - end_local_APIC_setup(); + bsp_end_local_APIC_setup(); #ifdef CONFIG_X86_IO_APIC if (smp_found_config && !skip_ioapic_setup && nr_ioapics) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 03273b6c272c..08776a953487 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1060,7 +1060,7 @@ static int __init smp_sanity_check(unsigned max_cpus) connect_bsp_APIC(); setup_local_APIC(); - end_local_APIC_setup(); + bsp_end_local_APIC_setup(); return -1; } @@ -1137,7 +1137,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) if (!skip_ioapic_setup && nr_ioapics) enable_IO_APIC(); - end_local_APIC_setup(); + bsp_end_local_APIC_setup(); map_cpu_to_logical_apicid(); -- cgit v1.2.3 From 5117348dea5e3ecbb785cfa1271386fb49332b41 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 12 Feb 2011 11:51:03 +0100 Subject: x86: Readd missing irq_to_desc() in fixup_irq() commit a3c08e5d(x86: Convert irq_chip access to new functions) accidentally zapped desc = irq_to_desc(irq); in the vector loop. So we lock some random irq descriptor. Add it back. Signed-off-by: Thomas Gleixner Cc: # .37 --- arch/x86/kernel/irq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 52945da52a94..387b6a0c9e81 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -367,7 +367,8 @@ void fixup_irqs(void) if (irr & (1 << (vector % 32))) { irq = __this_cpu_read(vector_irq[vector]); - data = irq_get_irq_data(irq); + desc = irq_to_desc(irq); + data = &desc->irq_data; raw_spin_lock(&desc->lock); if (data->chip->irq_retrigger) data->chip->irq_retrigger(data); -- cgit v1.2.3 From 1c9d16e35911090dee3f9313e6af13af623d66ee Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 11 Feb 2011 18:17:54 +0100 Subject: x86: Fix mwait_usable section mismatch We use it in non __cpuinit code now too so drop marker. Signed-off-by: Borislav Petkov LKML-Reference: <20110211171754.GA21047@aftab> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/cpu.h | 2 +- arch/x86/kernel/process.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h index 6e6e7558e702..4564c8e28a33 100644 --- a/arch/x86/include/asm/cpu.h +++ b/arch/x86/include/asm/cpu.h @@ -32,6 +32,6 @@ extern void arch_unregister_cpu(int); DECLARE_PER_CPU(int, cpu_state); -int __cpuinit mwait_usable(const struct cpuinfo_x86 *); +int mwait_usable(const struct cpuinfo_x86 *); #endif /* _ASM_X86_CPU_H */ diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index e764fc05d700..3c189e9accd3 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -506,7 +506,7 @@ static void poll_idle(void) #define MWAIT_ECX_EXTENDED_INFO 0x01 #define MWAIT_EDX_C1 0xf0 -int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) +int mwait_usable(const struct cpuinfo_x86 *c) { u32 eax, ebx, ecx, edx; -- cgit v1.2.3 From 678301ecadec24ff77ab310eebf8a32ccddb1850 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 14 Feb 2011 22:52:38 +0100 Subject: x86, ioapic: Don't warn about non-existing IOAPICs if we have none mp_find_ioapic() prints errors like: ERROR: Unable to locate IOAPIC for GSI 13 if it can't find the IOAPIC that manages that specific GSI. I see errors like that at every boot of a laptop that apparently doesn't have any IOAPICs. But if there are no IOAPICs it doesn't seem to be an error that none can be found. A solution that gets rid of this message is to directly return if nr_ioapics (still) is zero. (But keep returning -1 in that case, so nothing breaks from this change.) The call chain that generates this error is: pnpacpi_allocated_resource() case ACPI_RESOURCE_TYPE_IRQ: pnpacpi_parse_allocated_irqresource() acpi_get_override_irq() mp_find_ioapic() Signed-off-by: Paul Bolle Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 697dc34b7b87..ca9e2a3545a9 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -4002,6 +4002,9 @@ int mp_find_ioapic(u32 gsi) { int i = 0; + if (nr_ioapics == 0) + return -1; + /* Find the IOAPIC that manages this GSI. */ for (i = 0; i < nr_ioapics; i++) { if ((gsi >= mp_gsi_routing[i].gsi_base) -- cgit v1.2.3 From 84e383b322e5348db03be54ff64cc6da87003717 Mon Sep 17 00:00:00 2001 From: Naga Chumbalkar Date: Mon, 14 Feb 2011 22:47:17 +0000 Subject: x86, dmi, debug: Log board name (when present) in dmesg/oops output The "Type 2" SMBIOS record that contains Board Name is not strictly required and may be absent in the SMBIOS on some platforms. ( Please note that Type 2 is not listed in Table 3 in Sec 6.2 ("Required Structures and Data") of the SMBIOS v2.7 Specification. ) Use the Manufacturer Name (aka System Vendor) name. Print Board Name only when it is present. Before the fix: (i) dmesg output: DMI: /ProLiant DL380 G6, BIOS P62 01/29/2011 (ii) oops output: Pid: 2170, comm: bash Not tainted 2.6.38-rc4+ #3 /ProLiant DL380 G6 After the fix: (i) dmesg output: DMI: HP ProLiant DL380 G6, BIOS P62 01/29/2011 (ii) oops output: Pid: 2278, comm: bash Not tainted 2.6.38-rc4+ #4 HP ProLiant DL380 G6 Signed-off-by: Naga Chumbalkar Reviewed-by: Bjorn Helgaas Cc: # .3x - good for debugging, please apply as far back as it applies cleanly LKML-Reference: <20110214224423.2182.13929.sendpatchset@nchumbalkar.americas.hpqcorp.net> Signed-off-by: Ingo Molnar --- arch/x86/kernel/process.c | 22 ++++++++++++++++------ drivers/firmware/dmi_scan.c | 11 +++++++++-- 2 files changed, 25 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 3c189e9accd3..ff4554198981 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -92,21 +92,31 @@ void show_regs(struct pt_regs *regs) void show_regs_common(void) { - const char *board, *product; + const char *vendor, *product, *board; - board = dmi_get_system_info(DMI_BOARD_NAME); - if (!board) - board = ""; + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!vendor) + vendor = ""; product = dmi_get_system_info(DMI_PRODUCT_NAME); if (!product) product = ""; + /* Board Name is optional */ + board = dmi_get_system_info(DMI_BOARD_NAME); + printk(KERN_CONT "\n"); - printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n", + printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s", current->pid, current->comm, print_tainted(), init_utsname()->release, (int)strcspn(init_utsname()->version, " "), - init_utsname()->version, board, product); + init_utsname()->version); + printk(KERN_CONT " "); + printk(KERN_CONT "%s %s", vendor, product); + if (board) { + printk(KERN_CONT "/"); + printk(KERN_CONT "%s", board); + } + printk(KERN_CONT "\n"); } void flush_thread(void) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index e28e41668177..bcb1126e3d00 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -378,10 +378,17 @@ static void __init print_filtered(const char *info) static void __init dmi_dump_ids(void) { + const char *board; /* Board Name is optional */ + printk(KERN_DEBUG "DMI: "); - print_filtered(dmi_get_system_info(DMI_BOARD_NAME)); - printk(KERN_CONT "/"); + print_filtered(dmi_get_system_info(DMI_SYS_VENDOR)); + printk(KERN_CONT " "); print_filtered(dmi_get_system_info(DMI_PRODUCT_NAME)); + board = dmi_get_system_info(DMI_BOARD_NAME); + if (board) { + printk(KERN_CONT "/"); + print_filtered(board); + } printk(KERN_CONT ", BIOS "); print_filtered(dmi_get_system_info(DMI_BIOS_VERSION)); printk(KERN_CONT " "); -- cgit v1.2.3