From 2166cc2657fe73fe2b2fb052689a1bf4bb8715bb Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 27 Sep 2021 13:10:51 +0200 Subject: ABI: sysfs-platform-dell-privacy-wmi: correct ABI entries As described at Documentation/ABI/README doesn't contain an Attribute: field. The way sysfs ABI is supposed to work is that each different attribute would have a separate file. So, the right way to map this would be like: /sys/.../dell_privacy_supported_type/mic_mute /sys/.../dell_privacy_supported_type/camera_shutter /sys/.../dell_privacy_current_state/mic_mute /sys/.../dell_privacy_current_state/camera_shutter However, it seems to late to fix that, as this was merged already on Kernel 5.13, and a change right now would be a regression. So, instead, let's at least fix the entry to match the expected format. While here, fix the format of the contact, which is not a valid e-mail URL. This should also fix the current warnings produced when building the docs: Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi:35: WARNING: Unexpected indentation. Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi:2: WARNING: Unexpected indentation. Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/42846621fdf2bf206feb114d06b14cbc47475fb5.1632740376.git.mchehab+huawei@kernel.org Signed-off-by: Hans de Goede --- .../ABI/testing/sysfs-platform-dell-privacy-wmi | 60 ++++++++++++++-------- 1 file changed, 38 insertions(+), 22 deletions(-) (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi b/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi index 7f9e18705861..1f1f274a6979 100644 --- a/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi +++ b/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi @@ -1,55 +1,71 @@ What: /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_supported_type Date: Apr 2021 KernelVersion: 5.13 -Contact: "perry.yuan@dell.com>" +Contact: "" Description: Display which dell hardware level privacy devices are supported “Dell Privacy” is a set of HW, FW, and SW features to enhance Dell’s commitment to platform privacy for MIC, Camera, and ePrivacy screens. The supported hardware privacy devices are: -Attributes: - Microphone Mute: + + Attributes: + Microphone Mute: Identifies the local microphone can be muted by hardware, no applications is available to capture system mic sound - Camera Shutter: + Camera Shutter: Identifies camera shutter controlled by hardware, which is a micromechanical shutter assembly that is built onto the camera module to block capturing images from outside the laptop - supported: + Values: + + supported: The privacy device is supported by this system - unsupported: + unsupported: The privacy device is not supported on this system - For example to check which privacy devices are supported: + For example to check which privacy devices are supported:: - # cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_supported_type - [Microphone Mute] [supported] - [Camera Shutter] [supported] - [ePrivacy Screen] [unsupported] + # cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_supported_type + [Microphone Mute] [supported] + [Camera Shutter] [supported] + [ePrivacy Screen] [unsupported] What: /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_current_state Date: Apr 2021 KernelVersion: 5.13 -Contact: "perry.yuan@dell.com>" +Contact: "" Description: Allow user space to check current dell privacy device state. Describes the Device State class exposed by BIOS which can be consumed by various applications interested in knowing the Privacy feature capabilities -Attributes: - muted: - Identifies the privacy device is turned off and cannot send stream to OS applications - unmuted: - Identifies the privacy device is turned on ,audio or camera driver can get - stream from mic and camera module to OS applications + Attributes: + Microphone: + Identifies the local microphone can be muted by hardware, no applications + is available to capture system mic sound + + Camera Shutter: + Identifies camera shutter controlled by hardware, which is a micromechanical + shutter assembly that is built onto the camera module to block capturing images + from outside the laptop + + Values: + muted: + Identifies the privacy device is turned off + and cannot send stream to OS applications + + unmuted: + Identifies the privacy device is turned on, + audio or camera driver can get stream from mic + and camera module to OS applications - For example to check all supported current privacy device states: + For example to check all supported current privacy device states:: - # cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_current_state - [Microphone] [unmuted] - [Camera Shutter] [unmuted] + # cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_current_state + [Microphone] [unmuted] + [Camera Shutter] [unmuted] -- cgit v1.2.3 From 10317dda79325f75e88d12a616e5043efe498338 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 27 Sep 2021 13:10:56 +0200 Subject: ABI: sysfs-platform-intel-pmc: add blank lines to make it valid for ReST The ReST format requires blank lines before/after identation changes, for it to properly detect lists. Fixes: ee7abc105e2b ("platform/x86: intel_pmc_core: export platform global reset bits via etr3 sysfs file") Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/3673e1a255ad4100c933af215b60d68ba126f820.1632740376.git.mchehab+huawei@kernel.org Signed-off-by: Hans de Goede --- Documentation/ABI/testing/sysfs-platform-intel-pmc | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/testing/sysfs-platform-intel-pmc b/Documentation/ABI/testing/sysfs-platform-intel-pmc index ef199af75ab0..f31d59b21f9b 100644 --- a/Documentation/ABI/testing/sysfs-platform-intel-pmc +++ b/Documentation/ABI/testing/sysfs-platform-intel-pmc @@ -11,8 +11,10 @@ Description: to take effect. Display global reset setting bits for PMC. + * bit 31 - global reset is locked * bit 20 - global reset is set + Writing bit 20 value to the etr3 will induce a platform "global reset" upon consequent platform reset, in case the register is not locked. -- cgit v1.2.3 From 527cd54d49ddf3dbbd54566609f8e905bc17c843 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Sat, 2 Oct 2021 12:32:37 +0300 Subject: Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces Add documentation for the new attributes: - "bios_active_image"; "bios_auth_fail"; "bios_upgrade_fail"; "bios_safe_mode" to represent various BIOS statuses. - "lc{n}_enable" - for put/release the line card to/from enable state. - "lc{n}_pwr" - for power on/off the line card. - "lc{n}_rst_mask" - for line card reset state enforced by ASIC, when it sets it due to some abnormal ASIC behavior. - "psu3_on"; "psu4_on" - for connection/disconnection power supply unit to/from the power source. - "pm_mgmt_en" - for setting power management control ownership. When power management control is provided by hardware, it means that hardware will automatically power off one or more line cards in case system power budget is under power required for feeding all powered on line cards. It could be a case, when some of power units lost power good state. - "shutdown_unlock" - for unlocking system after hardware or firmware thermal shutdown, which causes locking of the all interfaces to ASIC. Signed-off-by: Vadim Pasternak Reviewed-by: Michael Shych Link: https://lore.kernel.org/r/20211002093238.3771419-9-vadimp@nvidia.com Signed-off-by: Hans de Goede --- Documentation/ABI/stable/sysfs-driver-mlxreg-io | 138 ++++++++++++++++++++++++ 1 file changed, 138 insertions(+) (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index b2553df2e786..6ef6979c9448 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -223,3 +223,141 @@ Description: These files show with which CPLD part numbers and minor system. The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_active_image +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_auth_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_upgrade_fail +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: The files represent BIOS statuses: + - bios_active_image: location of current active BIOS image: + 0: Top, 1: Bottom. + The reported value should correspond to value expected by OS + in case of BIOS safe mode is 0. This bit is related to Intel + top-swap feature of DualBios on the same flash. + - bios_auth_fail: BIOS upgrade is failed because provided BIOS + image is not signed correctly. + - bios_upgrade_fail: BIOS upgrade is failed by some other + reason not because authentication. For example due to + physical SPI flash problem. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_enable +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: These files allow line cards enable state control. + Expected behavior: + When lc{n}_enable is written 1, related line card is released + from the reset state, when 0 - is hold in reset state. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_pwr +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: These files switching line cards power on and off. + Expected behavior: + When lc{n}_pwr is written 1, related line card is powered + on, when written 0 - powered off. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_rst_mask +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: These files clear line card reset bit enforced by ASIC, when it + sets it due to some abnormal ASIC behavior. + Expected behavior: + When lc{n}_rst_mask is written 1, related line card reset bit + is cleared, when written 0 - no effect. + + The files are write only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/os_started +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: This file, when written 1, indicates to programmable devices + that OS is taking control over it. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pm_mgmt_en +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: This file assigns power management control ownership. + When power management control is provided by hardware, hardware + will automatically power off one or more line previously + powered line cards in case system power budget is getting + insufficient. It could be in case when some of power units lost + power good state. + When pm_mgmt_en is written 1, power management control by + software is enabled, 0 - power management control by hardware. + Note that for any setting of pm_mgmt_en attribute hardware will + not allow to power on any new line card in case system power + budget is insufficient. + Same in case software will try to power on several line cards + at once - hardware will power line cards while system has + enough power budget. + Default is 0. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu3_on +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu4_on +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: These files switching power supply units on and off. + Expected behavior: + When psu3_on or psu4_on is written 1, related unit will be + disconnected from the power source, when written 0 - connected. + + The files are write only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/shutdown_unlock +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: This file allows to unlock ASIC after thermal shutdown event. + When system thermal shutdown is enforced by ASIC, ASIC is + getting locked and after system boot it will not be available. + Software can decide to unlock it by setting this attribute to + 1 and then perform system power cycle by setting pwr_cycle + attribute to 1 (power cycle of main power domain). + Before setting shutdown_unlock to 1 it is recommended to + validate that system reboot cause is reset_asic_thermal or + reset_thermal_spc_or_pciesw. + In case shutdown_unlock is not set 1, the only way to release + ASIC from locking - is full system power cycle through the + external power distribution unit. + Default is 1. + + The file is read/write. -- cgit v1.2.3 From 5b0a315c3db548646e2cc9707d8a82d818a3c956 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Sat, 2 Oct 2021 12:32:38 +0300 Subject: Documentation/ABI: Add new line card attributes for mlxreg-io sysfs interfaces Add documentation for the new attributes for line cards: - CPLDs versioning. - Write protection control for 'nvram' devices. - Line card reset reasons. - Enabling burning of FPGA and CPLDs. - Enabling burning of FPGA and gearbox SPI flashes, - Enabling power of whole line card. - Enabling power of QSFP ports equipped on line card. - The maximum powered required for line card feeding. - Line card configuration Id. Signed-off-by: Vadim Pasternak Reviewed-by: Michael Shych Link: https://lore.kernel.org/r/20211002093238.3771419-10-vadimp@nvidia.com Signed-off-by: Hans de Goede --- Documentation/ABI/stable/sysfs-driver-mlxreg-io | 103 ++++++++++++++++++++++++ 1 file changed, 103 insertions(+) (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index 6ef6979c9448..c84795ccecad 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -361,3 +361,106 @@ Description: This file allows to unlock ASIC after thermal shutdown event. Default is 1. The file is read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_pn +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version_min +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: These files show with which CPLD major and minor versions + and part number has been burned CPLD device on line card. + + The files are read only. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_pn +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version_min +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: These files show with which FPGA major and minor versions + and part number has been burned FPGA device on line card. + + The files are read only. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/vpd_wp +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: This file allow to overwrite line card VPD hardware write + protection mode. When attribute is set 1 - write protection is + disabled, when 0 - enabled. + Default is 0. + If the system is in locked-down mode writing this file will not + be allowed. + The purpose if this file is to allow line card VPD burning + during production flow. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_aux_pwr_or_ref +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_dc_dc_pwr_fail +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_fpga_not_done +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_from_chassis +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_line_card +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_pwr_off_from_chassis +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: These files show the line reset cause, as following: power + auxiliary outage or power refresh, DC-to-DC power failure, FPGA reset + failed, line card reset failed, power off from chassis. + Value 1 in file means this is reset cause, 0 - otherwise. Only one of + the above causes could be 1 at the same time, representing only last + reset cause. + + The files are read only. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld_upgrade_en +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_upgrade_en +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: These files allow CPLD and FPGA burning. Value 1 in file means burning + is enabled, 0 - otherwise. + If the system is in locked-down mode writing these files will + not be allowed. + The purpose of these files to allow line card CPLD and FPGA + upgrade through the JTAG daisy-chain. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/qsfp_pwr_en +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/pwr_en +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: These files allow to power on/off all QSFP ports and whole line card. + The attributes are set 1 for power on, 0 - for power off. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/agb_spi_burn_en +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_spi_burn_en +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: These files allow gearboxes and FPGA SPI flash burning. + The attributes are set 1 to enable burning, 0 - to disable. + If the system is in locked-down mode writing these files will + not be allowed. + The purpose of these files to allow line card Gearboxes and FPGA + burning during production flow. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/max_power +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/config +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak +Description: These files provide the maximum powered required for line card + feeding and line card configuration Id. + + The files are read only. -- cgit v1.2.3 From 164e32717cbde87a2df27183b985631b49701fad Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 21 Oct 2021 15:02:43 -0600 Subject: docs: ABI: fix documentation warning in sysfs-driver-mlxreg-io The use of a Sphinx list within this ABI file caused the following warning: Documentation/ABI/stable/sysfs-driver-mlxreg-io:230: WARNING: Unexpected indentation. Documentation/ABI/stable/sysfs-driver-mlxreg-io:230: WARNING: Block quote ends without a blank line; unexpected unindent. Remove the bullets to make the warning go away and get proper formatting. Reported-by: Stephen Rothwell Signed-off-by: Jonathan Corbet Signed-off-by: Hans de Goede --- Documentation/ABI/stable/sysfs-driver-mlxreg-io | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index c84795ccecad..12c3f895cd2f 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -231,16 +231,19 @@ Date: October 2021 KernelVersion: 5.16 Contact: Vadim Pasternak Description: The files represent BIOS statuses: - - bios_active_image: location of current active BIOS image: - 0: Top, 1: Bottom. - The reported value should correspond to value expected by OS - in case of BIOS safe mode is 0. This bit is related to Intel - top-swap feature of DualBios on the same flash. - - bios_auth_fail: BIOS upgrade is failed because provided BIOS - image is not signed correctly. - - bios_upgrade_fail: BIOS upgrade is failed by some other - reason not because authentication. For example due to - physical SPI flash problem. + + bios_active_image: location of current active BIOS image: + 0: Top, 1: Bottom. + The reported value should correspond to value expected by OS + in case of BIOS safe mode is 0. This bit is related to Intel + top-swap feature of DualBios on the same flash. + + bios_auth_fail: BIOS upgrade is failed because provided BIOS + image is not signed correctly. + + bios_upgrade_fail: BIOS upgrade is failed by some other + reason not because authentication. For example due to + physical SPI flash problem. The files are read only. -- cgit v1.2.3