From a78f6787a3dd7223bf185895fdcea661b408dc0a Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 17:18:08 +0000 Subject: DocBook/drm: Eradicate inappropriate uses of the future tense Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 50 +++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 25 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c27915893974..0527ff2be37e 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -57,10 +57,10 @@ existing drivers. - First, we'll go over some typical driver initialization + First, we go over some typical driver initialization requirements, like setting up command buffers, creating an initial output configuration, and initializing core services. - Subsequent sections will cover core internals in more detail, + Subsequent sections cover core internals in more detail, providing implementation notes and examples. @@ -74,7 +74,7 @@ The core of every DRM driver is struct drm_driver. Drivers - will typically statically initialize a drm_driver structure, + typically statically initialize a drm_driver structure, then pass it to drm_init() at load time. @@ -155,7 +155,7 @@ In the example above, taken from the i915 DRM driver, the driver sets several flags indicating what core features it supports. - We'll go over the individual callbacks in later sections. Since + We go over the individual callbacks in later sections. Since flags indicate which features your driver supports to the DRM core, you need to set most of them prior to calling drm_init(). Some, like DRIVER_MODESET can be set later based on user supplied parameters, @@ -238,7 +238,7 @@ In this specific case, the driver requires AGP and supports - IRQs. DMA, as we'll see, is handled by device specific ioctls + IRQs. DMA, as discussed later, is handled by device specific ioctls in this case. It also supports the kernel mode setting APIs, though unlike in the actual i915 driver source, this example unconditionally exports KMS capability. @@ -315,7 +315,7 @@ Configuring the device - Obviously, device configuration will be device specific. + Obviously, device configuration is device specific. However, there are several common operations: finding a device's PCI resources, mapping them, and potentially setting up an IRQ handler. @@ -326,7 +326,7 @@ drm_get_resource_len() can be used to find BARs on the given drm_device struct. Once those values have been retrieved, the driver load function can call drm_addmap() to create a new - mapping for the BAR in question. Note you'll probably want a + mapping for the BAR in question. Note you probably want a drm_local_map_t in your driver private structure to track any mappings you create. @@ -357,7 +357,7 @@ - Once your interrupt handler is registered (it'll use your + Once your interrupt handler is registered (it uses your drm_driver.irq_handler as the actual interrupt handling function), you can safely enable interrupts on your device, assuming any other state your interrupt handler uses is also @@ -389,7 +389,7 @@ should support a memory manager. - If your driver supports memory management (it should!), you'll + If your driver supports memory management (it should!), you need to set that up at load time as well. How you initialize it depends on which memory manager you're using, TTM or GEM. @@ -430,13 +430,13 @@ have a type of TTM_GLOBAL_TTM_MEM. The size field for the global object should be sizeof(struct ttm_mem_global), and the init and release hooks should point at your driver specific init and - release routines, which will probably eventually call + release routines, which probably eventually call ttm_mem_global_init and ttm_mem_global_release respectively. Once your global TTM accounting structure is set up and initialized (done by calling ttm_global_item_ref on the global object you - just created), you'll need to create a buffer object TTM to + just created), you need to create a buffer object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, @@ -455,8 +455,8 @@ than TTM, but has no VRAM management capability. Core GEM initialization is comprised of a basic drm_mm_init call to create a GTT DRM MM object, which provides an address space pool for - object allocation. In a KMS configuration, the driver will - need to allocate and initialize a command ring buffer following + object allocation. In a KMS configuration, the driver + needs to allocate and initialize a command ring buffer following basic GEM initialization. Most UMA devices have a so-called "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the @@ -464,16 +464,16 @@ be initialized separately into its own DRM MM object. - Initialization will be driver specific, and will depend on + Initialization is driver specific, and depends on the architecture of the device. In the case of Intel integrated graphics chips like 965GM, GEM initialization can be done by calling the internal GEM init function, i915_gem_do_init(). Since the 965GM is a UMA device - (i.e. it doesn't have dedicated VRAM), GEM will manage + (i.e. it doesn't have dedicated VRAM), GEM manages making regular RAM available for GPU operations. Memory set aside by the BIOS (called "stolen" memory by the i915 - driver) will be managed by the DRM memrange allocator; the - rest of the aperture will be managed by GEM. + driver) is managed by the DRM memrange allocator; the + rest of the aperture is managed by GEM. /* Basic memrange allocator for stolen space (aka vram) */ drm_memrange_init(&dev_priv->vram, 0, prealloc_size); @@ -616,7 +616,7 @@ void intel_crt_init(struct drm_device *dev) DRM_IOCTL_MODESET_CTL should be called by application level drivers before and after mode setting, since on many devices the - vertical blank counter will be reset at that time. Internally, + vertical blank counter is reset at that time. Internally, the DRM snapshots the last vblank count when the ioctl is called with the _DRM_PRE_MODESET command so that the counter won't go backwards (which is dealt with when _DRM_POST_MODESET is used). @@ -632,8 +632,8 @@ void intel_crt_init(struct drm_device *dev) register. The enable and disable vblank callbacks should enable and disable vertical blank interrupts, respectively. In the absence of DRM clients waiting on vblank events, the core DRM - code will use the disable_vblank() function to disable - interrupts, which saves power. They'll be re-enabled again when + code uses the disable_vblank() function to disable + interrupts, which saves power. They are re-enabled again when a client calls the vblank wait ioctl above. @@ -699,14 +699,14 @@ void intel_crt_init(struct drm_device *dev) performs any necessary flushing or synchronization to put the object into the desired coherency domain (note that the object may be busy, i.e. an active render target; in that case the set domain function - will block the client and wait for rendering to complete before + blocks the client and waits for rendering to complete before performing any necessary flushing operations). Perhaps the most important GEM function is providing a command execution interface to clients. Client programs construct command buffers containing references to previously allocated memory objects - and submit them to GEM. At that point, GEM will take care to bind + and submit them to GEM. At that point, GEM takes care to bind all the objects into the GTT, execute the buffer, and provide necessary synchronization between clients accessing the same buffers. This often involves evicting some objects from the GTT and re-binding @@ -767,7 +767,7 @@ void intel_crt_init(struct drm_device *dev) In order to set a mode on a given CRTC, encoder and connector configuration, clients need to provide a framebuffer object which - will provide a source of pixels for the CRTC to deliver to the encoder(s) + provides a source of pixels for the CRTC to deliver to the encoder(s) and ultimately the connector(s) in the configuration. A framebuffer is fundamentally a driver specific memory object, made into an opaque handle by the DRM addfb function. Once an fb has been created this @@ -789,7 +789,7 @@ void intel_crt_init(struct drm_device *dev) The DRM core provides some suspend/resume code, but drivers wanting full suspend/resume support should provide save() and - restore() functions. These will be called at suspend, + restore() functions. These are called at suspend, hibernate, or resume time, and should perform any state save or restore required by your device across suspend or hibernate states. @@ -823,7 +823,7 @@ void intel_crt_init(struct drm_device *dev) Cover generic ioctls and sysfs layout here. Only need high - level info, since man pages will cover the rest. + level info, since man pages should cover the rest. -- cgit v1.2.3 From f11aca045c165b9d4c9c4fce29f51ec24bcf64d3 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 17:21:31 +0000 Subject: DocBook/drm: can -> may Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 0527ff2be37e..b9079386040d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -32,7 +32,7 @@ The Linux DRM layer contains code intended to support the needs of complex graphics devices, usually containing programmable pipelines well suited to 3D graphics acceleration. Graphics - drivers in the kernel can make use of DRM functions to make + drivers in the kernel may make use of DRM functions to make tasks like memory management, interrupt handling and DMA easier, and provide a uniform interface to applications. @@ -293,12 +293,12 @@ can be used for tracking various device specific bits of information, like register offsets, command buffer status, register state for suspend/resume, etc. At load time, a - driver can simply allocate one and set drm_device.dev_priv + driver may simply allocate one and set drm_device.dev_priv appropriately; at unload the driver can free it and set drm_device.dev_priv to NULL. - The DRM supports several counters which can be used for rough + The DRM supports several counters which may be used for rough performance characterization. Note that the DRM stat counter system is not often used by applications, and supporting additional counters is completely optional. @@ -323,7 +323,7 @@ Finding & mapping resources is fairly straightforward. The DRM wrapper functions, drm_get_resource_start() and - drm_get_resource_len() can be used to find BARs on the given + drm_get_resource_len() may be used to find BARs on the given drm_device struct. Once those values have been retrieved, the driver load function can call drm_addmap() to create a new mapping for the BAR in question. Note you probably want a @@ -335,12 +335,12 @@ if compatibility with other operating systems isn't a concern (DRM drivers can run under various BSD variants and OpenSolaris), - native Linux calls can be used for the above, e.g. pci_resource_* + native Linux calls may be used for the above, e.g. pci_resource_* and iomap*/iounmap. See the Linux device driver book for more info. - Once you have a register map, you can use the DRM_READn() and + Once you have a register map, you may use the DRM_READn() and DRM_WRITEn() macros to access the registers on your device, or use driver specific versions to offset into your MMIO space relative to a driver specific base pointer (see I915_READ for @@ -440,7 +440,7 @@ provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, - driver specific init and release functions can be provided, + driver specific init and release functions may be provided, likely eventually calling ttm_bo_global_init and ttm_bo_global_release, respectively. Also like the previous object, ttm_global_item_ref is used to create an initial reference @@ -483,7 +483,7 @@ - Once the memory manager has been set up, we can allocate the + Once the memory manager has been set up, we may allocate the command buffer. In the i915 case, this is also done with a GEM function, i915_gem_init_ringbuffer(). @@ -572,7 +572,7 @@ void intel_crt_init(struct drm_device *dev) devices with PC-style architectures (i.e. a set of display planes for feeding pixels to encoders which are in turn routed to connectors). Devices with more complex requirements needing - finer grained management can opt to use the core callbacks + finer grained management may opt to use the core callbacks directly. @@ -637,7 +637,7 @@ void intel_crt_init(struct drm_device *dev) a client calls the vblank wait ioctl above. - Devices that don't provide a count register can simply use an + Devices that don't provide a count register may simply use an internal atomic counter incremented on every vertical blank interrupt, and can make their enable and disable vblank functions into no-ops. -- cgit v1.2.3 From 0c54781bc5aaec1e23bc50a4ef757b8e8bfc693b Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 17:55:54 +0000 Subject: DocBook/drm: Clean up code comment Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index b9079386040d..4ddc99928668 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -88,8 +88,8 @@ static struct drm_driver driver = { - /* don't use mtrr's here, the Xserver or user space app should - * deal with them for intel hardware. + /* Don't use MTRRs here; the Xserver or userspace app should + * deal with them for Intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index ce045a8cf82c..acf4ea84c801 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -785,8 +785,8 @@ static struct vm_operations_struct i915_gem_vm_ops = { }; static struct drm_driver driver = { - /* don't use mtrr's here, the Xserver or user space app should - * deal with them for intel hardware. + /* Don't use MTRRs here; the Xserver or userspace app should + * deal with them for Intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/ -- cgit v1.2.3 From 2c267e9e016da3e19a95261875a5f3b19dd6e9f6 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:10:12 +0000 Subject: DocBook/drm: Use a semicolon Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 4ddc99928668..aa13e0883510 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -154,8 +154,8 @@ In the example above, taken from the i915 DRM driver, the driver - sets several flags indicating what core features it supports. - We go over the individual callbacks in later sections. Since + sets several flags indicating what core features it supports; + we go over the individual callbacks in later sections. Since flags indicate which features your driver supports to the DRM core, you need to set most of them prior to calling drm_init(). Some, like DRIVER_MODESET can be set later based on user supplied parameters, @@ -647,8 +647,8 @@ void intel_crt_init(struct drm_device *dev) Memory management - The memory manager lies at the heart of many DRM operations, and - is also required to support advanced client features like OpenGL + The memory manager lies at the heart of many DRM operations; it + is required to support advanced client features like OpenGL pbuffers. The DRM currently contains two memory managers, TTM and GEM. -- cgit v1.2.3 From 02391f1fe7b4e5434e4c558dcae99b9368c84bf3 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:20:54 +0000 Subject: DocBook/drm: a -> an Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index aa13e0883510..5b815b83c30b 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -203,7 +203,7 @@ DRIVER_HAVE_IRQDRIVER_IRQ_SHARED - DRIVER_HAVE_IRQ indicates whether the driver has a IRQ + DRIVER_HAVE_IRQ indicates whether the driver has an IRQ handler, DRIVER_IRQ_SHARED indicates whether the device & handler support shared IRQs (note that this is required of PCI drivers). -- cgit v1.2.3 From b1f95bdc1eb10e3d3c8a85b2f0bc08fa6c08ae5d Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:21:29 +0000 Subject: DocBook/drm: , -> . Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 5b815b83c30b..a0f0f984f04f 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -204,7 +204,7 @@ DRIVER_HAVE_IRQ indicates whether the driver has an IRQ - handler, DRIVER_IRQ_SHARED indicates whether the device & + handler. DRIVER_IRQ_SHARED indicates whether the device & handler support shared IRQs (note that this is required of PCI drivers). -- cgit v1.2.3 From 80c84e6f3c2c707ccb5d7b500e25bda69f0e1895 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:23:21 +0000 Subject: DocBook/drm: Move `should be set' to the beginning of the sentence Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index a0f0f984f04f..42368f4f7bab 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -214,8 +214,8 @@ DRIVER_DMA_QUEUE - If the driver queues DMA requests and completes them - asynchronously, this flag should be set. Deprecated. + Should be set if the driver queues DMA requests and completes them + asynchronously. Deprecated. -- cgit v1.2.3 From 58f1d652def02db0bdcdf03d01f3483fc18ec392 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:31:42 +0000 Subject: DocBook/drm: Clean up `pre-memory management aware' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 42368f4f7bab..e9242c09ac54 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -273,7 +273,7 @@ conflict with DRM client requirements. For instance, if user level mode setting drivers are in use, it would be problematic to perform output discovery & configuration at load time. - Likewise, if pre-memory management aware user level drivers are + Likewise, if user-level drivers unaware of memory management are in use, memory management and command buffer setup may need to be omitted. These requirements are driver specific, and care needs to be taken to keep both old and new applications and -- cgit v1.2.3 From 75aa9df5a2bf2ae90a1f0f6f283278f634ca4233 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:34:49 +0000 Subject: DocBook/drm: Rearrange wording to make more sense Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index e9242c09ac54..eb28cc02d41b 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -281,9 +281,9 @@ module parameter to control whether advanced features are enabled at load time or in legacy fashion. If compatibility is a concern (e.g. with drivers converted over to the new interfaces - from the old ones), care must be taken to prevent incompatible - device initialization and control with the currently active - userspace drivers. + from the old ones), care must be taken to prevent device + initialization and control that is incompatible with + currently active userspace drivers. -- cgit v1.2.3 From 6e375f44b6073dd320895753ff05cbfd3f410f66 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:37:05 +0000 Subject: DocBook/drm: Replace the paragraph's first sentence with its last sentence Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index eb28cc02d41b..9eda9b6df51d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -269,8 +269,10 @@ initial output configuration. - Note that the tasks performed at driver load time must not - conflict with DRM client requirements. For instance, if user + If compatibility is a concern (e.g. with drivers converted over + to the new interfaces from the old ones), care must be taken to + prevent device initialization and control that is incompatible with + currently active userspace drivers. For instance, if user level mode setting drivers are in use, it would be problematic to perform output discovery & configuration at load time. Likewise, if user-level drivers unaware of memory management are @@ -279,11 +281,7 @@ needs to be taken to keep both old and new applications and libraries working. The i915 driver supports the "modeset" module parameter to control whether advanced features are - enabled at load time or in legacy fashion. If compatibility is - a concern (e.g. with drivers converted over to the new interfaces - from the old ones), care must be taken to prevent device - initialization and control that is incompatible with - currently active userspace drivers. + enabled at load time or in legacy fashion. -- cgit v1.2.3 From 06fa7b8066d4dc3f6c9d4c4bf34f385d5a823f13 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:40:55 +0000 Subject: DocBook/drm: Better wording Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 9eda9b6df51d..b4196c1a239d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -292,8 +292,8 @@ information, like register offsets, command buffer status, register state for suspend/resume, etc. At load time, a driver may simply allocate one and set drm_device.dev_priv - appropriately; at unload the driver can free it and set - drm_device.dev_priv to NULL. + appropriately; it should be freed and drm_device.dev_priv set + to NULL when the driver is unloaded. The DRM supports several counters which may be used for rough -- cgit v1.2.3 From 57a15fd663d6680dc100a537f0ed328993c33af2 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:42:36 +0000 Subject: DocBook/drm: Clearer wording with `for consumption by' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index b4196c1a239d..33290e3e3ffa 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -305,8 +305,8 @@ These interfaces are deprecated and should not be used. If performance monitoring is desired, the developer should investigate and potentially enhance the kernel perf and tracing infrastructure to export - GPU related performance information to performance monitoring - tools and applications. + GPU related performance information for consumption by performance + monitoring tools and applications. -- cgit v1.2.3 From 8814630f0b59421e558f4403b79f5dc3a025a386 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:46:10 +0000 Subject: DocBook/drm: Insert missing `that' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 33290e3e3ffa..25e0f460a973 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -321,10 +321,10 @@ Finding & mapping resources is fairly straightforward. The DRM wrapper functions, drm_get_resource_start() and - drm_get_resource_len() may be used to find BARs on the given + drm_get_resource_len(), may be used to find BARs on the given drm_device struct. Once those values have been retrieved, the driver load function can call drm_addmap() to create a new - mapping for the BAR in question. Note you probably want a + mapping for the BAR in question. Note that you probably want a drm_local_map_t in your driver private structure to track any mappings you create. -- cgit v1.2.3 From f07faf693c59b449b6637ea056e5826c85dcd265 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:48:15 +0000 Subject: DocBook/drm: Insert missing `an' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 25e0f460a973..1b2e3c37e377 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -342,7 +342,7 @@ DRM_WRITEn() macros to access the registers on your device, or use driver specific versions to offset into your MMIO space relative to a driver specific base pointer (see I915_READ for - example). + an example). If your device supports interrupt generation, you may want to -- cgit v1.2.3 From 5b658bf2bf9e47f9a67cd26b1c69e4441eaf04fc Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:49:11 +0000 Subject: DocBook/drm: `setup' is the noun; `to set up' is the verb Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 1b2e3c37e377..d2f1ddaa3ca0 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -346,7 +346,7 @@ If your device supports interrupt generation, you may want to - setup an interrupt handler at driver load time as well. This + set up an interrupt handler at driver load time as well. This is done using the drm_irq_install() function. If your device supports vertical blank interrupts, it should call drm_vblank_init() to initialize the core vblank handling code before -- cgit v1.2.3 From bb49a6a1f3303f9cf23a19f403c9b90cdff0e7da Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:50:14 +0000 Subject: DocBook/drm: `at driver load time' -> `when the driver is loaded' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index d2f1ddaa3ca0..7001937f6b7d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -346,7 +346,7 @@ If your device supports interrupt generation, you may want to - set up an interrupt handler at driver load time as well. This + set up an interrupt handler when the driver is loaded. This is done using the drm_irq_install() function. If your device supports vertical blank interrupts, it should call drm_vblank_init() to initialize the core vblank handling code before -- cgit v1.2.3 From 9c2416adac986d7d90814d7985a0ea80ebea416f Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:56:12 +0000 Subject: DocBook/drm: Use the passive voice Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 7001937f6b7d..03321ebaf4a7 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -369,9 +369,9 @@ using the pci_map_rom() call, a convenience function that takes care of mapping the actual ROM, whether it has been shadowed into memory (typically at address 0xc0000) or exists - on the PCI device in the ROM BAR. Note that once you've - mapped the ROM and extracted any necessary information, be - sure to unmap it; on many devices the ROM address decoder is + on the PCI device in the ROM BAR. Note that after the ROM + has been mapped and any necessary information has been extracted, + it should be unmapped; on many devices the ROM address decoder is shared with other BARs, so leaving it mapped can cause undesired behavior like hangs or memory corruption. -- cgit v1.2.3 From 118bdd70bdd73b08dcc3920fa30a21be5bbbffae Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:57:04 +0000 Subject: DocBook/drm: Offset modifiers with commas Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 03321ebaf4a7..ce145babef6e 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -371,7 +371,7 @@ shadowed into memory (typically at address 0xc0000) or exists on the PCI device in the ROM BAR. Note that after the ROM has been mapped and any necessary information has been extracted, - it should be unmapped; on many devices the ROM address decoder is + it should be unmapped; on many devices, the ROM address decoder is shared with other BARs, so leaving it mapped can cause undesired behavior like hangs or memory corruption. @@ -440,7 +440,7 @@ and its size should be sizeof(struct ttm_bo_global). Again, driver specific init and release functions may be provided, likely eventually calling ttm_bo_global_init and - ttm_bo_global_release, respectively. Also like the previous + ttm_bo_global_release, respectively. Also, like the previous object, ttm_global_item_ref is used to create an initial reference count for the TTM, which will call your initialization function. @@ -613,7 +613,7 @@ void intel_crt_init(struct drm_device *dev) DRM_IOCTL_MODESET_CTL should be called by application level - drivers before and after mode setting, since on many devices the + drivers before and after mode setting, since on many devices, the vertical blank counter is reset at that time. Internally, the DRM snapshots the last vblank count when the ioctl is called with the _DRM_PRE_MODESET command so that the counter won't go @@ -696,7 +696,7 @@ void intel_crt_init(struct drm_device *dev) set domain function, which evaluates an object's current domain and performs any necessary flushing or synchronization to put the object into the desired coherency domain (note that the object may be busy, - i.e. an active render target; in that case the set domain function + i.e. an active render target; in that case, the set domain function blocks the client and waits for rendering to complete before performing any necessary flushing operations). -- cgit v1.2.3 From 8d36ffae67d89a86e37e7745503743fec1ac695c Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:57:37 +0000 Subject: DocBook/drm: can -> could Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index ce145babef6e..60ddf4be11c7 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -372,7 +372,7 @@ on the PCI device in the ROM BAR. Note that after the ROM has been mapped and any necessary information has been extracted, it should be unmapped; on many devices, the ROM address decoder is - shared with other BARs, so leaving it mapped can cause + shared with other BARs, so leaving it mapped could cause undesired behavior like hangs or memory corruption. -- cgit v1.2.3 From eb2b8d4273fb8b73821ca8dbc9c0de10e9879833 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:58:42 +0000 Subject: DocBook/drm: , -> : Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 60ddf4be11c7..953c4cb726bb 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -389,7 +389,7 @@ If your driver supports memory management (it should!), you need to set that up at load time as well. How you initialize - it depends on which memory manager you're using, TTM or GEM. + it depends on which memory manager you're using: TTM or GEM. TTM initialization @@ -647,7 +647,7 @@ void intel_crt_init(struct drm_device *dev) The memory manager lies at the heart of many DRM operations; it is required to support advanced client features like OpenGL - pbuffers. The DRM currently contains two memory managers, TTM + pbuffers. The DRM currently contains two memory managers: TTM and GEM. -- cgit v1.2.3 From 005d7f4a01d3c755c3abab38b7e380f0bbff475d Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:02:52 +0000 Subject: DocBook/drm: Insert missing comma Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 953c4cb726bb..230c738c22f0 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -429,7 +429,7 @@ object should be sizeof(struct ttm_mem_global), and the init and release hooks should point at your driver specific init and release routines, which probably eventually call - ttm_mem_global_init and ttm_mem_global_release respectively. + ttm_mem_global_init and ttm_mem_global_release, respectively. Once your global TTM accounting structure is set up and initialized @@ -499,8 +499,8 @@ Output discovery and initialization - Several core functions exist to create CRTCs, encoders and - connectors, namely drm_crtc_init(), drm_connector_init() and + Several core functions exist to create CRTCs, encoders, and + connectors, namely drm_crtc_init(), drm_connector_init(), and drm_encoder_init(), along with several "helper" functions to perform common tasks. @@ -578,7 +578,7 @@ void intel_crt_init(struct drm_device *dev) - For each encoder, CRTC and connector, several functions must + For each encoder, CRTC, and connector, several functions must be provided, depending on the object type. Encoder objects need to provide a DPMS (basically on/off) function, mode fixup (for converting requested modes into native hardware timings), @@ -727,7 +727,7 @@ void intel_crt_init(struct drm_device *dev) Output management At the core of the DRM output management code is a set of - structures representing CRTCs, encoders and connectors. + structures representing CRTCs, encoders, and connectors. A CRTC is an abstraction representing a part of the chip that -- cgit v1.2.3 From 1c86de2216f678bfb6e2472af6e5c25b0df8d91f Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:14:26 +0000 Subject: DocBook/drm: Remove parentheses and unnecessary repetition Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 230c738c22f0..6b2a80369f6b 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -433,8 +433,8 @@ Once your global TTM accounting structure is set up and initialized - (done by calling ttm_global_item_ref on the global object you - just created), you need to create a buffer object TTM to + by calling ttm_global_item_ref on it, + you need to create a buffer object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, -- cgit v1.2.3 From ae63d793a43888eeb1c16422252d987aa37ab96c Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:19:18 +0000 Subject: DocBook/drm: Insert `()' after function name Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 6b2a80369f6b..6977cd91779c 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -433,15 +433,15 @@ Once your global TTM accounting structure is set up and initialized - by calling ttm_global_item_ref on it, + by calling ttm_global_item_ref() on it, you need to create a buffer object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, driver specific init and release functions may be provided, - likely eventually calling ttm_bo_global_init and - ttm_bo_global_release, respectively. Also, like the previous - object, ttm_global_item_ref is used to create an initial reference + likely eventually calling ttm_bo_global_init() and + ttm_bo_global_release(), respectively. Also, like the previous + object, ttm_global_item_ref() is used to create an initial reference count for the TTM, which will call your initialization function. -- cgit v1.2.3 From 049cc903e714a27805eae0c34a4c34902a385032 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:21:17 +0000 Subject: DocBook/drm: Streamline wording of GEM initialization Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 6977cd91779c..7c11d790f749 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -451,7 +451,7 @@ GEM is an alternative to TTM, designed specifically for UMA devices. It has simpler initialization and execution requirements than TTM, but has no VRAM management capability. Core GEM - initialization is comprised of a basic drm_mm_init call to create + is initialized by calling drm_mm_init() to create a GTT DRM MM object, which provides an address space pool for object allocation. In a KMS configuration, the driver needs to allocate and initialize a command ring buffer following -- cgit v1.2.3 From 482b2ad8e488e609bb3bb408a8e9ca17b73b17c6 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:37:24 +0000 Subject: DocBook/drm: basic -> core Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 7c11d790f749..d385e902f5ff 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -455,7 +455,7 @@ a GTT DRM MM object, which provides an address space pool for object allocation. In a KMS configuration, the driver needs to allocate and initialize a command ring buffer following - basic GEM initialization. Most UMA devices have a so-called + core GEM initialization. Most UMA devices have a so-called "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the device. This space is not typically managed by GEM, and must -- cgit v1.2.3 From 54f2cb8fc930e08fd6156519b28c45d576615f82 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:41:37 +0000 Subject: DocBook/drm: Use a singular subject for grammatical cleanliness Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index d385e902f5ff..3470c6b2f843 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -455,7 +455,7 @@ a GTT DRM MM object, which provides an address space pool for object allocation. In a KMS configuration, the driver needs to allocate and initialize a command ring buffer following - core GEM initialization. Most UMA devices have a so-called + core GEM initialization. A UMA device usually has a so-called "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the device. This space is not typically managed by GEM, and must @@ -635,10 +635,10 @@ void intel_crt_init(struct drm_device *dev) a client calls the vblank wait ioctl above. - Devices that don't provide a count register may simply use an + A device that doesn't provide a count register may simply use an internal atomic counter incremented on every vertical blank - interrupt, and can make their enable and disable vblank - functions into no-ops. + interrupt (and then treat the enable_vblank() and disable_vblank() + callbacks as no-ops). -- cgit v1.2.3 From 9029bd7a42e3c32783866630ee3eb6b82e273544 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:42:20 +0000 Subject: DocBook/drm: The word `so-called'; I do not think it connotes what you think it connotes From Webster's Revised Unabridged Dictionary (1913) [web1913]: So-called \So"-called`\, a. So named; called by such a name (but perhaps called thus with doubtful propriety). From WordNet (r) 2.0 [wn]: so-called adj : doubtful or suspect; "these so-called experts are no help" [syn: {alleged(a)}, {supposed}] My strong conviction is that widespread use of 'so gennant' or 'sogennant' in German has led to the creeping misuse of 'so-called' in English (especially through technical writings). In English, it would be better to use: what is called or a better translation of 'so gennant': so named Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 3470c6b2f843..66a114a05c6f 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -455,7 +455,7 @@ a GTT DRM MM object, which provides an address space pool for object allocation. In a KMS configuration, the driver needs to allocate and initialize a command ring buffer following - core GEM initialization. A UMA device usually has a so-called + core GEM initialization. A UMA device usually has what is called a "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the device. This space is not typically managed by GEM, and must -- cgit v1.2.3 From 1dbd39c3ea3967c41a09e81c826499f7ae9c8180 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:48:32 +0000 Subject: DocBook/drm: Insert `it' for smooth reading Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 66a114a05c6f..15541b1fc052 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -458,7 +458,7 @@ core GEM initialization. A UMA device usually has what is called a "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the - device. This space is not typically managed by GEM, and must + device. This space is not typically managed by GEM, and it must be initialized separately into its own DRM MM object. -- cgit v1.2.3 From 3bf7df615612671271512aada7d83285f3fa731b Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:49:10 +0000 Subject: DocBook/drm: Remove redundancy Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 15541b1fc052..c24f50ce7862 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -462,8 +462,7 @@ be initialized separately into its own DRM MM object. - Initialization is driver specific, and depends on - the architecture of the device. In the case of Intel + Initialization is driver specific. In the case of Intel integrated graphics chips like 965GM, GEM initialization can be done by calling the internal GEM init function, i915_gem_do_init(). Since the 965GM is a UMA device -- cgit v1.2.3 From 327d6fb962f227a31d4b03869774287efca49c50 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:18:14 +0000 Subject: DocBook/drm: Clarify `final initialization' via better formatting Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c24f50ce7862..1bbeea72a01f 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -490,10 +490,19 @@ Output configuration - The final initialization task is output configuration. This involves - finding and initializing the CRTCs, encoders and connectors - for your device, creating an initial configuration and - registering a framebuffer console driver. + The final initialization task is output configuration. This involves: + + + Finding and initializing the CRTCs, encoders, and connectors + for the device. + + + Creating an initial configuration. + + + Registering a framebuffer console driver. + + Output discovery and initialization -- cgit v1.2.3 From 8a9ba910ac3962e5adb4ce1f086adf1e21fa04d1 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:21:22 +0000 Subject: DocBook/drm: Use a colon Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 1bbeea72a01f..790e634e5635 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -508,7 +508,7 @@ Output discovery and initialization Several core functions exist to create CRTCs, encoders, and - connectors, namely drm_crtc_init(), drm_connector_init(), and + connectors, namely: drm_crtc_init(), drm_connector_init(), and drm_encoder_init(), along with several "helper" functions to perform common tasks. -- cgit v1.2.3 From 896ee65fb646f9a98243a9f69e5904dff394c78a Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:26:17 +0000 Subject: DocBook/drm: Remove extraneous commas Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 790e634e5635..d2aee84f18af 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -562,9 +562,9 @@ void intel_crt_init(struct drm_device *dev) In the example above (again, taken from the i915 driver), a CRT connector and encoder combination is created. A device - specific i2c bus is also created, for fetching EDID data and + specific i2c bus is also created for fetching EDID data and performing monitor detection. Once the process is complete, - the new connector is registered with sysfs, to make its + the new connector is registered with sysfs to make its properties available to applications. -- cgit v1.2.3 From 4dc0152d5780f04573046b06a3fb7c7ad9b81afa Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:29:32 +0000 Subject: DocBook/drm: Insert `the' for readability, and change `set' to `setting' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index d2aee84f18af..09e02f7c668c 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -573,8 +573,8 @@ void intel_crt_init(struct drm_device *dev) Since many PC-class graphics devices have similar display output designs, the DRM provides a set of helper functions to make output management easier. The core helper routines handle - encoder re-routing and disabling of unused functions following - mode set. Using the helpers is optional, but recommended for + encoder re-routing and the disabling of unused functions following + mode setting. Using the helpers is optional, but recommended for devices with PC-style architectures (i.e. a set of display planes for feeding pixels to encoders which are in turn routed to connectors). Devices with more complex requirements needing -- cgit v1.2.3 From 65ffef508f23d5e67940cadc8eca2ae34738018a Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:55:58 +0000 Subject: DocBook/drm: Use an itemizedlist for what an encoder needs to provide Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 09e02f7c668c..da011f2af9cb 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -586,17 +586,25 @@ void intel_crt_init(struct drm_device *dev) - For each encoder, CRTC, and connector, several functions must - be provided, depending on the object type. Encoder objects - need to provide a DPMS (basically on/off) function, mode fixup - (for converting requested modes into native hardware timings), - and prepare, set and commit functions for use by the core DRM - helper functions. Connector helpers need to provide mode fetch and - validity functions as well as an encoder matching function for - returning an ideal encoder for a given connector. The core - connector functions include a DPMS callback, (deprecated) - save/restore routines, detection, mode probing, property handling, - and cleanup functions. + Each encoder object needs to provide: + + + A DPMS (basically on/off) function. + + + A mode-fixup function (for converting requested modes into + native hardware timings). + + + Functions (prepare, set, and commit) for use by the core DRM + helper functions. + + + Connector helpers need to provide functions (mode-fetch, validity, + and encoder-matching) for returning an ideal encoder for a given + connector. The core connector functions include a DPMS callback, + save/restore routines (deprecated), detection, mode probing, + property handling, and cleanup functions. -- cgit v1.2.3 From 51b9500de28a1e5e7a2090de5d345d6d98581617 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 21:11:30 +0000 Subject: DocBook/drm: Use a for vblank ioctls Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 39 +++++++++++++++++++++++++-------------- 1 file changed, 25 insertions(+), 14 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index da011f2af9cb..457d56a1a966 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -619,22 +619,33 @@ void intel_crt_init(struct drm_device *dev) VBlank event handling The DRM core exposes two vertical blank related ioctls: - DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL. + + + DRM_IOCTL_WAIT_VBLANK + + + This takes a struct drm_wait_vblank structure as its argument, + and it is used to block or request a signal when a specified + vblank event occurs. + + + + + DRM_IOCTL_MODESET_CTL + + + This should be called by application level drivers before and + after mode setting, since on many devices the vertical blank + counter is reset at that time. Internally, the DRM snapshots + the last vblank count when the ioctl is called with the + _DRM_PRE_MODESET command so that the counter won't go backwards + (which is dealt with when _DRM_POST_MODESET is used). + + + + - - DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure - as its argument, and is used to block or request a signal when a - specified vblank event occurs. - - - DRM_IOCTL_MODESET_CTL should be called by application level - drivers before and after mode setting, since on many devices, the - vertical blank counter is reset at that time. Internally, - the DRM snapshots the last vblank count when the ioctl is called - with the _DRM_PRE_MODESET command so that the counter won't go - backwards (which is dealt with when _DRM_POST_MODESET is used). - To support the functions above, the DRM core provides several helper functions for tracking vertical blank counters, and -- cgit v1.2.3 From f877bd4ad5508e2f0653c31d05ffe0ad4e2bfe11 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 21:16:15 +0000 Subject: DocBook/drm: Insert a comma Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 457d56a1a966..0387970234b3 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -638,7 +638,7 @@ void intel_crt_init(struct drm_device *dev) after mode setting, since on many devices the vertical blank counter is reset at that time. Internally, the DRM snapshots the last vblank count when the ioctl is called with the - _DRM_PRE_MODESET command so that the counter won't go backwards + _DRM_PRE_MODESET command, so that the counter won't go backwards (which is dealt with when _DRM_POST_MODESET is used). -- cgit v1.2.3 From 0c2d91a80a156208d2f9f3dfb01871ebcf4a9338 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 15:59:56 +0000 Subject: DocBook/drm: Use an for fundamental GEM operations Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 0387970234b3..c358367f9f85 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -709,9 +709,13 @@ void intel_crt_init(struct drm_device *dev) read & write, mapping, and domain ownership transfers. - On a fundamental level, GEM involves several operations: memory - allocation and freeing, command execution, and aperture management - at command execution time. Buffer object allocation is relatively + On a fundamental level, GEM involves several operations: + + Memory allocation and freeing + Command execution + Aperture management at command execution time + + Buffer object allocation is relatively straightforward and largely provided by Linux's shmem layer, which provides memory to back each object. When mapped into the GTT or used in a command buffer, the backing pages for an object are -- cgit v1.2.3 From 2d43f5d667273ba4975cb79782a46aa374dd8607 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 16:00:55 +0000 Subject: DocBook/drm: Improve flow of GPU/CPU coherence sentence Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c358367f9f85..ba20f9fbb62b 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -720,8 +720,9 @@ void intel_crt_init(struct drm_device *dev) provides memory to back each object. When mapped into the GTT or used in a command buffer, the backing pages for an object are flushed to memory and marked write combined so as to be coherent - with the GPU. Likewise, when the GPU finishes rendering to an object, - if the CPU accesses it, it must be made coherent with the CPU's view + with the GPU. Likewise, if the CPU accesses an object after the GPU + has finished rendering to the object, then the object must be made + coherent with the CPU's view of memory, usually involving GPU cache flushing of various kinds. This core CPU<->GPU coherency management is provided by the GEM set domain function, which evaluates an object's current domain and -- cgit v1.2.3 From b8c6e0fe46fcd60f58089365dd96dcf04f95263b Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 17:34:00 +0000 Subject: DocBook/drm: Refer to the domain-setting function as a device-specific ioctl Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index ba20f9fbb62b..9ae328aa1dd3 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -724,11 +724,11 @@ void intel_crt_init(struct drm_device *dev) has finished rendering to the object, then the object must be made coherent with the CPU's view of memory, usually involving GPU cache flushing of various kinds. - This core CPU<->GPU coherency management is provided by the GEM - set domain function, which evaluates an object's current domain and + This core CPU<->GPU coherency management is provided by a + device-specific ioctl, which evaluates an object's current domain and performs any necessary flushing or synchronization to put the object into the desired coherency domain (note that the object may be busy, - i.e. an active render target; in that case, the set domain function + i.e. an active render target; in that case, setting the domain blocks the client and waits for rendering to complete before performing any necessary flushing operations). -- cgit v1.2.3 From e355b2014da06458385902c47edf193a997895fc Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 17:38:48 +0000 Subject: DocBook/drm: Better flow with `, and then' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 9ae328aa1dd3..0b6c59d6aa5f 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -735,8 +735,8 @@ void intel_crt_init(struct drm_device *dev) Perhaps the most important GEM function is providing a command execution interface to clients. Client programs construct command - buffers containing references to previously allocated memory objects - and submit them to GEM. At that point, GEM takes care to bind + buffers containing references to previously allocated memory objects, + and then submit them to GEM. At that point, GEM takes care to bind all the objects into the GTT, execute the buffer, and provide necessary synchronization between clients accessing the same buffers. This often involves evicting some objects from the GTT and re-binding -- cgit v1.2.3 From 964d32dcbefcfda015bc33dc76414b05c6f512de Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 17:41:31 +0000 Subject: DocBook/drm: Use `; otherwise,' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 0b6c59d6aa5f..606a989d8895 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -743,7 +743,7 @@ void intel_crt_init(struct drm_device *dev) others (a fairly expensive operation), and providing relocation support which hides fixed GTT offsets from clients. Clients must take care not to submit command buffers that reference more objects - than can fit in the GTT or GEM will reject them and no rendering + than can fit in the GTT; otherwise, GEM will reject them and no rendering will occur. Similarly, if several objects in the buffer require fence registers to be allocated for correct rendering (e.g. 2D blits on pre-965 chips), care must be taken not to require more fence -- cgit v1.2.3 From 5a462d58c84a2f5ed161daced2c7df34357c6d3d Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 17:58:46 +0000 Subject: DocBook/drm: Clean up the paragraph on framebuffer objects Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 606a989d8895..a39e76bae03d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -795,14 +795,12 @@ void intel_crt_init(struct drm_device *dev) Framebuffer management - In order to set a mode on a given CRTC, encoder and connector - configuration, clients need to provide a framebuffer object which - provides a source of pixels for the CRTC to deliver to the encoder(s) - and ultimately the connector(s) in the configuration. A framebuffer - is fundamentally a driver specific memory object, made into an opaque - handle by the DRM addfb function. Once an fb has been created this - way it can be passed to the KMS mode setting routines for use in - a configuration. + Clients need to provide a framebuffer object which provides a source + of pixels for a CRTC to deliver to the encoder(s) and ultimately the + connector(s). A framebuffer is fundamentally a driver specific memory + object, made into an opaque handle by the DRM's addfb() function. + Once a framebuffer has been created this way, it may be passed to the + KMS mode setting routines for use in a completed configuration. -- cgit v1.2.3 From a5294e01f2777649834d218583e7a32b2dacb699 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 18:05:52 +0000 Subject: DocBook/drm: `(device|driver) specific' -> `(device|driver)-specific' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index a39e76bae03d..65e14f96f943 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -238,7 +238,7 @@ In this specific case, the driver requires AGP and supports - IRQs. DMA, as discussed later, is handled by device specific ioctls + IRQs. DMA, as discussed later, is handled by device-specific ioctls in this case. It also supports the kernel mode setting APIs, though unlike in the actual i915 driver source, this example unconditionally exports KMS capability. @@ -277,7 +277,7 @@ to perform output discovery & configuration at load time. Likewise, if user-level drivers unaware of memory management are in use, memory management and command buffer setup may need to - be omitted. These requirements are driver specific, and care + be omitted. These requirements are driver-specific, and care needs to be taken to keep both old and new applications and libraries working. The i915 driver supports the "modeset" module parameter to control whether advanced features are @@ -288,7 +288,7 @@ Driver private & performance counters The driver private hangs off the main drm_device structure and - can be used for tracking various device specific bits of + can be used for tracking various device-specific bits of information, like register offsets, command buffer status, register state for suspend/resume, etc. At load time, a driver may simply allocate one and set drm_device.dev_priv @@ -313,7 +313,7 @@ Configuring the device - Obviously, device configuration is device specific. + Obviously, device configuration is device-specific. However, there are several common operations: finding a device's PCI resources, mapping them, and potentially setting up an IRQ handler. @@ -340,8 +340,8 @@ Once you have a register map, you may use the DRM_READn() and DRM_WRITEn() macros to access the registers on your device, or - use driver specific versions to offset into your MMIO space - relative to a driver specific base pointer (see I915_READ for + use driver-specific versions to offset into your MMIO space + relative to a driver-specific base pointer (see I915_READ for an example). @@ -399,7 +399,7 @@ and devices with dedicated video RAM (VRAM), i.e. most discrete graphics devices. If your device has dedicated RAM, supporting TTM is desirable. TTM also integrates tightly with your - driver specific buffer execution function. See the radeon + driver-specific buffer execution function. See the radeon driver for examples. @@ -427,7 +427,7 @@ created by the memory manager at runtime. Your global TTM should have a type of TTM_GLOBAL_TTM_MEM. The size field for the global object should be sizeof(struct ttm_mem_global), and the init and - release hooks should point at your driver specific init and + release hooks should point at your driver-specific init and release routines, which probably eventually call ttm_mem_global_init and ttm_mem_global_release, respectively. @@ -438,7 +438,7 @@ provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, - driver specific init and release functions may be provided, + driver-specific init and release functions may be provided, likely eventually calling ttm_bo_global_init() and ttm_bo_global_release(), respectively. Also, like the previous object, ttm_global_item_ref() is used to create an initial reference @@ -462,7 +462,7 @@ be initialized separately into its own DRM MM object. - Initialization is driver specific. In the case of Intel + Initialization is driver-specific. In the case of Intel integrated graphics chips like 965GM, GEM initialization can be done by calling the internal GEM init function, i915_gem_do_init(). Since the 965GM is a UMA device @@ -561,8 +561,8 @@ void intel_crt_init(struct drm_device *dev) In the example above (again, taken from the i915 driver), a - CRT connector and encoder combination is created. A device - specific i2c bus is also created for fetching EDID data and + CRT connector and encoder combination is created. A device-specific + i2c bus is also created for fetching EDID data and performing monitor detection. Once the process is complete, the new connector is registered with sysfs to make its properties available to applications. @@ -704,8 +704,8 @@ void intel_crt_init(struct drm_device *dev) GEM-enabled drivers must provide gem_init_object() and gem_free_object() callbacks to support the core memory - allocation routines. They should also provide several driver - specific ioctls to support command execution, pinning, buffer + allocation routines. They should also provide several driver-specific + ioctls to support command execution, pinning, buffer read & write, mapping, and domain ownership transfers. @@ -797,7 +797,7 @@ void intel_crt_init(struct drm_device *dev) Clients need to provide a framebuffer object which provides a source of pixels for a CRTC to deliver to the encoder(s) and ultimately the - connector(s). A framebuffer is fundamentally a driver specific memory + connector(s). A framebuffer is fundamentally a driver-specific memory object, made into an opaque handle by the DRM's addfb() function. Once a framebuffer has been created this way, it may be passed to the KMS mode setting routines for use in a completed configuration. @@ -807,7 +807,7 @@ void intel_crt_init(struct drm_device *dev) Command submission & fencing - This should cover a few device specific command submission + This should cover a few device-specific command submission implementations. @@ -840,7 +840,7 @@ void intel_crt_init(struct drm_device *dev) The DRM core exports several interfaces to applications, generally intended to be used through corresponding libdrm - wrapper functions. In addition, drivers export device specific + wrapper functions. In addition, drivers export device-specific interfaces for use by userspace drivers & device aware applications through ioctls and sysfs files. -- cgit v1.2.3 From 7f0925aca586b4a0cce81b06af7383d6aec59cc1 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 18:07:13 +0000 Subject: DocBook/drm: `device aware' -> `device-aware' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 65e14f96f943..9da9b2831370 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -841,7 +841,7 @@ void intel_crt_init(struct drm_device *dev) The DRM core exports several interfaces to applications, generally intended to be used through corresponding libdrm wrapper functions. In addition, drivers export device-specific - interfaces for use by userspace drivers & device aware + interfaces for use by userspace drivers & device-aware applications through ioctls and sysfs files. -- cgit v1.2.3 From bcd3cfc1213894ff955771508d46fa18d66e9328 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 19:29:16 +0000 Subject: DocBook/drm: Clean up a todo-note Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 9da9b2831370..196b8b9dba11 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -850,8 +850,8 @@ void intel_crt_init(struct drm_device *dev) management, memory management, and output management. - Cover generic ioctls and sysfs layout here. Only need high - level info, since man pages should cover the rest. + Cover generic ioctls and sysfs layout here. We only need high-level + info, since man pages should cover the rest. -- cgit v1.2.3