From 6c857ccf4eedfdf8b8cabdd36e3675469f59d31b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 19 Apr 2021 14:24:56 +0300 Subject: mmc: mmc_spi: Set up polling even if voltage-ranges is not present When voltage-ranges property is not present the driver assumes that it is 3.3v (3.2v..3.4v). But at the same time it disallows polling. Fix that by dropping the comparison to 0 when no property is provided. While at it, mark voltage-ranges property optional as it was initially. Fixes: 9c43df57910b ("mmc_spi: Add support for OpenFirmware bindings") Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210419112459.25241-3-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt index 75486cca8054..5e74db69f581 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt @@ -5,11 +5,11 @@ by mmc.txt and the properties used by the mmc_spi driver. Required properties: - spi-max-frequency : maximum frequency for this device (Hz). -- voltage-ranges : two cells are required, first cell specifies minimum - slot voltage (mV), second cell specifies maximum slot voltage (mV). - Several ranges could be specified. Optional properties: +- voltage-ranges : two cells are required, first cell specifies minimum + slot voltage (mV), second cell specifies maximum slot voltage (mV). + Several ranges could be specified. If not provided, 3.2v..3.4v is assumed. - gpios : may specify GPIOs in this order: Card-Detect GPIO, Write-Protect GPIO. Note that this does not follow the binding from mmc.txt, for historical reasons. -- cgit v1.2.3