From 810b4f51e8d0c2de9685f4addbf5ede7e589dd20 Mon Sep 17 00:00:00 2001 From: Tim Kryger Date: Fri, 25 Apr 2014 11:31:11 -0700 Subject: Documentation: dt: Add Kona PWM binding Add the binding description for the Kona PWM controller found on Broadcom's mobile SoCs. Signed-off-by: Tim Kryger Reviewed-by: Alex Elder Reviewed-by: Markus Mayer Signed-off-by: Thierry Reding --- .../devicetree/bindings/pwm/bcm-kona-pwm.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt b/Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt new file mode 100644 index 000000000000..8eae9fe7841c --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt @@ -0,0 +1,21 @@ +Broadcom Kona PWM controller device tree bindings + +This controller has 6 channels. + +Required Properties : +- compatible: should contain "brcm,kona-pwm" +- reg: physical base address and length of the controller's registers +- clocks: phandle + clock specifier pair for the external clock +- #pwm-cells: Should be 3. See pwm.txt in this directory for a + description of the cells format. + +Refer to clocks/clock-bindings.txt for generic clock consumer properties. + +Example: + +pwm: pwm@3e01a000 { + compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; + reg = <0x3e01a000 0xc4>; + clocks = <&pwm_clk>; + #pwm-cells = <3>; +}; -- cgit v1.2.3