From e167b2c3a0e631a51bbdf96f8e8550fe314cfbbd Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 27 Jul 2022 18:43:47 +0200 Subject: dt-bindings: fpga: microchip,mpf-spi-fpga-mgr: use spi-peripheral-props.yaml Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Reviewed-by: Conor Dooley Acked-by: Ivan Bornyakov Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20220727164347.386398-1-krzysztof.kozlowski@linaro.org Signed-off-by: Xu Yilun --- .../devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml index aee45cb15592..527532f039ce 100644 --- a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml +++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml @@ -22,13 +22,14 @@ properties: description: SPI chip select maxItems: 1 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | -- cgit v1.2.3 From 857f09f605bae6702b5ec9afdc47c6b188d7cdf6 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 27 Jul 2022 17:52:03 +0200 Subject: dt-bindings: iio: adc: ti,am3359-adc: add ti,am654-adc Document the ti,am654-adc compatible already used in DTS: arch/arm64/boot/dts/ti/k3-am642-evm.dtb: adc: compatible:0: 'ti,am654-adc' is not one of ['ti,am3359-adc', 'ti,am4372-adc'] Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220727155203.320929-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml index d6f21d5cccd7..b32be24a9f98 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml @@ -11,9 +11,14 @@ maintainers: properties: compatible: - enum: - - ti,am3359-adc - - ti,am4372-adc + oneOf: + - enum: + - ti,am3359-adc + - ti,am4372-adc + - items: + - enum: + - ti,am654-adc + - const: ti,am3359-adc '#io-channel-cells': const: 1 -- cgit v1.2.3 From af0a61e940f8cea62c3c9a18ff5b3830b16e2087 Mon Sep 17 00:00:00 2001 From: Shreeya Patel Date: Mon, 25 Jul 2022 16:10:49 +0530 Subject: dt-bindings: Document ltrf216a light sensor bindings Add devicetree bindings for ltrf216a ambient light sensor. Reviewed-by: Rob Herring Signed-off-by: Shreeya Patel Link: https://lore.kernel.org/r/20220725104050.491396-2-shreeya.patel@collabora.com Signed-off-by: Jonathan Cameron --- .../bindings/iio/light/liteon,ltrf216a.yaml | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml new file mode 100644 index 000000000000..7de1b0e721ca --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LTRF216A Ambient Light Sensor + +maintainers: + - Shreeya Patel + +description: + Ambient light sensing with an i2c interface. + +properties: + compatible: + const: liteon,ltrf216a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@53 { + compatible = "liteon,ltrf216a"; + reg = <0x53>; + vdd-supply = <&vdd_regulator>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + }; + }; -- cgit v1.2.3 From 3b7eee5b38755501b8cc09b8f3b46c005af40a50 Mon Sep 17 00:00:00 2001 From: ChiYuan Huang Date: Tue, 19 Jul 2022 22:52:43 +0800 Subject: dt-bindings: iio: adc: Add rtq6056 adc support Add the documentation for Richtek rtq6056. Signed-off-by: ChiYuan Huang Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/1658242365-27797-2-git-send-email-u0084500@gmail.com Signed-off-by: Jonathan Cameron --- .../bindings/iio/adc/richtek,rtq6056.yaml | 56 ++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml new file mode 100644 index 000000000000..88e008629ea8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC + +maintainers: + - ChiYuan Huang + +description: | + The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus + interface, and the device provides full information for system by reading + out the loading current and power. + + The device monitors both of the drops across sense resistor and the BUS + voltage, converts into the current in amperes, and power in watts through + internal analog-to-digital converter ADC. The programmable calibration, + adjustable conversion time, and averaging function are also built in for + more design flexibility. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf + +properties: + compatible: + const: richtek,rtq6056 + + reg: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + shunt-resistor-micro-ohms: + description: Shunt IN+/IN- sensing node resistor + +required: + - compatible + - reg + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + adc@40 { + compatible = "richtek,rtq6056"; + reg = <0x40>; + #io-channel-cells = <1>; + }; + }; -- cgit v1.2.3 From becbe550a36e027440ca0ccef2195e67c054e5bb Mon Sep 17 00:00:00 2001 From: Francesco Dolcini Date: Tue, 12 Jul 2022 18:33:44 +0200 Subject: dt-bindings: iio: adc: stmpe: Remove node name requirement STMPE driver does not require a specific node name anymore, only the compatible is checked, update binding according to this. Signed-off-by: Francesco Dolcini Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220712163345.445811-5-francesco.dolcini@toradex.com Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml index 9049c699152f..333744a2159c 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml @@ -13,8 +13,7 @@ description: This ADC forms part of an ST microelectronics STMPE multifunction device . The ADC is shared with the STMPE touchscreen. As a result some ADC related settings are specified in the parent node. - The node name myst be stmpe_adc and should be a child node of the stmpe node - to which it belongs. + The node should be a child node of the stmpe node to which it belongs. properties: compatible: -- cgit v1.2.3 From ef6d997667cbb964dbc27339fefbe65ceabea13a Mon Sep 17 00:00:00 2001 From: Crt Mori Date: Mon, 8 Aug 2022 16:49:36 +0200 Subject: dt-bindings: iio: mlx90632 Add supply regulator documentation Document the newly added vdd supply option. Signed-off-by: Crt Mori Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220808144936.1559158-1-cmo@melexis.com Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/iio/temperature/melexis,mlx90632.yaml | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml index b547ddcd544a..4a55e7f25ae7 100644 --- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml @@ -35,6 +35,9 @@ properties: maxItems: 1 description: Default is 0x3a, but can be reprogrammed. + vdd-supply: + description: provide VDD power to the sensor. + required: - compatible - reg @@ -50,6 +53,7 @@ examples: temp-sensor@3a { compatible = "melexis,mlx90632"; reg = <0x3a>; + vdd-supply = <&ldo4_reg>; }; }; ... -- cgit v1.2.3 From f33abd2d57f9df81de8d4c1fee5c68849a0f8690 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 16 Aug 2022 15:53:59 +0300 Subject: dt-bindings: iio: Drop Tomislav Denis Emails to Tomislav Denis bounce ("550 5.1.1 User Unknown"). Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220816125401.70317-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml | 2 +- Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml index e0670e3fbb72..2876397fc668 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs maintainers: - - Tomislav Denis + - Jonathan Cameron description: | The ADS131E0x are a family of multichannel, simultaneous sampling, diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml index be2be4b556db..1f9fe15b4b3c 100644 --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: All Sensors DLH series low voltage digital pressure sensors maintainers: - - Tomislav Denis + - Jonathan Cameron description: | Bindings for the All Sensors DLH series pressure sensors. -- cgit v1.2.3 From 59d1c811c1dd9ab3bd2d216d1453eb0e4cacd52c Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 16 Aug 2022 15:54:01 +0300 Subject: dt-bindings: iio: adc: Drop Patrick Vasseur Emails to Patrick Vasseur bounce ("Unknown To address"). Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220816125401.70317-3-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml | 1 - 1 file changed, 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml index e82194974eea..82168b1495eb 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml @@ -8,7 +8,6 @@ title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs. maintainers: - Michael Hennerich - - Patrick Vasseur description: | Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908, -- cgit v1.2.3 From 801373884560e707883adb2aa7ef9bf2293bf88a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 16 Aug 2022 15:43:12 +0300 Subject: dt-bindings: iio: adc: use spi-peripheral-props.yaml Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Marcus Folkesson Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/iio/adc/adi,ad7124.yaml | 7 +++--- .../devicetree/bindings/iio/adc/adi,ad7192.yaml | 7 +++--- .../devicetree/bindings/iio/adc/adi,ad7280a.yaml | 7 +++--- .../devicetree/bindings/iio/adc/adi,ad7292.yaml | 7 +++--- .../devicetree/bindings/iio/adc/adi,ad7298.yaml | 6 +++-- .../devicetree/bindings/iio/adc/adi,ad7476.yaml | 8 +++---- .../devicetree/bindings/iio/adc/adi,ad7606.yaml | 7 +++--- .../devicetree/bindings/iio/adc/adi,ad7768-1.yaml | 7 +++--- .../devicetree/bindings/iio/adc/adi,ad7923.yaml | 7 +++--- .../devicetree/bindings/iio/adc/adi,ad7949.yaml | 7 +++--- .../devicetree/bindings/iio/adc/holt,hi8435.yaml | 7 +++--- .../devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 8 +++---- .../devicetree/bindings/iio/adc/maxim,max1027.yaml | 5 ++++- .../bindings/iio/adc/maxim,max11100.yaml | 7 ++++-- .../devicetree/bindings/iio/adc/maxim,max1118.yaml | 26 ++++++++++++---------- .../devicetree/bindings/iio/adc/maxim,max1241.yaml | 7 +++--- .../bindings/iio/adc/microchip,mcp3201.yaml | 6 +++-- .../bindings/iio/adc/microchip,mcp3911.yaml | 5 ++++- .../devicetree/bindings/iio/adc/ti,adc0832.yaml | 7 +++--- .../devicetree/bindings/iio/adc/ti,adc084s021.yaml | 7 +++--- .../devicetree/bindings/iio/adc/ti,adc108s102.yaml | 6 +++-- .../devicetree/bindings/iio/adc/ti,adc12138.yaml | 7 +++--- .../devicetree/bindings/iio/adc/ti,adc128s052.yaml | 7 +++--- .../devicetree/bindings/iio/adc/ti,adc161s626.yaml | 7 +++--- .../devicetree/bindings/iio/adc/ti,ads124s08.yaml | 7 +++--- .../devicetree/bindings/iio/adc/ti,ads131e08.yaml | 7 +++--- .../devicetree/bindings/iio/adc/ti,ads8344.yaml | 7 +++--- .../devicetree/bindings/iio/adc/ti,ads8688.yaml | 7 +++--- .../devicetree/bindings/iio/adc/ti,tlc4541.yaml | 7 +++--- .../devicetree/bindings/iio/adc/ti,tsc2046.yaml | 7 +++--- 30 files changed, 131 insertions(+), 93 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index fb3d0dae9bae..75a7184a4735 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -52,8 +52,6 @@ properties: avdd-supply: description: avdd supply can be used as reference for conversion. - spi-max-frequency: true - required: - compatible - reg @@ -106,7 +104,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 22b7ed3723f6..cc347dade4ef 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -30,8 +30,6 @@ properties: spi-cpha: true - spi-max-frequency: true - clocks: maxItems: 1 description: phandle to the master clock (mclk) @@ -94,7 +92,10 @@ required: - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml index a694d5794d4a..dfb8f305e2f0 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml @@ -28,8 +28,6 @@ properties: description: IRQ line for the ADC maxItems: 1 - spi-max-frequency: true - adi,voltage-alert-last-chan: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -55,7 +53,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml index a3e39a40c9b3..1bfbeed6f299 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml @@ -30,8 +30,6 @@ properties: spi-cpha: true - spi-max-frequency: true - '#address-cells': const: 1 @@ -65,7 +63,10 @@ patternProperties: additionalProperties: true -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml index ca414bb396c5..cd8ac5162d27 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml @@ -24,13 +24,15 @@ properties: vref-supply: true vdd-supply: true - spi-max-frequency: true required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml index 666414a9c0de..44c671eeda73 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml @@ -66,8 +66,6 @@ properties: to the other supplies. Needed to be able to establish channel scaling unless there is also an internal reference available (e.g. ad7091r) - spi-max-frequency: true - adi,conversion-start-gpios: description: A GPIO used to trigger the start of a conversion maxItems: 1 @@ -76,9 +74,9 @@ required: - compatible - reg -additionalProperties: false - allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + # Devices where reference is vcc - if: properties: @@ -158,6 +156,8 @@ allOf: properties: adi,conversion-start-gpios: false +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 516fc24d3346..ac5a47c8f070 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -32,8 +32,6 @@ properties: spi-cpol: true - spi-max-frequency: true - avcc-supply: true interrupts: @@ -105,7 +103,10 @@ required: - interrupts - adi,conversion-start-gpios -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml index a85a28145ef6..3ce59d4d065f 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -50,8 +50,6 @@ properties: reset-gpios: maxItems: 1 - spi-max-frequency: true - spi-cpol: true spi-cpha: true @@ -88,7 +86,10 @@ patternProperties: - reg additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml index 82168b1495eb..40b0a887db57 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml @@ -42,13 +42,14 @@ properties: '#size-cells': const: 0 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml index 0b10ed5f74ae..9ee4d977c5ed 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml @@ -49,8 +49,6 @@ properties: default: 4096000 - spi-max-frequency: true - '#io-channel-cells': const: 1 @@ -64,7 +62,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml index 52490cbb0af0..56bcbe5dcd79 100644 --- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml @@ -24,8 +24,6 @@ properties: GPIO used for controlling the reset pin maxItems: 1 - spi-max-frequency: true - "#io-channel-cells": const: 1 @@ -33,7 +31,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 0bd2fc0356c8..5207c919abe0 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -22,15 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: - description: maximal spi bus frequency supported - required: - compatible - vref-supply - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml index 46b7747076b9..d0a7ed26d9ea 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml @@ -45,7 +45,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml index 0cf87556ef82..4f74cb33383a 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml @@ -26,13 +26,16 @@ properties: minimum: 100000 maximum: 4800000 -additionalProperties: false - required: - compatible - reg - vref-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml index e948b3e37b0c..bb336e33ebe2 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml @@ -28,23 +28,25 @@ properties: vref-supply: description: External reference, needed to establish input scaling -if: - properties: - compatible: - contains: - const: maxim,max1118 -then: - required: - - vref-supply -else: - properties: - vref-supply: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + const: maxim,max1118 + then: + required: + - vref-supply + else: + properties: + vref-supply: false required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml index 4c7e0d94bff1..58b12fe8070c 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml @@ -39,15 +39,16 @@ properties: thus enabling power-down mode. maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - vdd-supply - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml index fcc1ba53b20d..18108f0f3731 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml @@ -32,7 +32,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true spi-cpol: true @@ -51,7 +50,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 95ab285f4eba..067a7bbadab8 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -51,7 +51,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml index f5a923cc847f..686721176a58 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml @@ -24,8 +24,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: External reference, needed to establish input scaling @@ -37,7 +35,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml index 1a113b30a414..726d2cbfa368 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml @@ -19,8 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: External reference, needed to establish input scaling @@ -37,7 +35,10 @@ required: - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml index ae5ce60987fe..9b072b057f16 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml @@ -19,7 +19,6 @@ properties: reg: true vref-supply: true - spi-max-frequency: true "#io-channel-cells": const: 1 @@ -28,7 +27,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml index ec3b2edf1fb7..076088a328c3 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml @@ -31,8 +31,6 @@ properties: maxItems: 1 description: Conversion clock input. - spi-max-frequency: true - vref-p-supply: description: The regulator supply for positive analog voltage reference @@ -62,7 +60,10 @@ required: - clocks - vref-p-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml index d54a0183f024..775eee972b12 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml @@ -27,8 +27,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true "#io-channel-cells": @@ -39,7 +37,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml index 3f4f334d6f73..afe782522904 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml @@ -21,8 +21,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdda-supply: true "#io-channel-cells": @@ -32,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml index 2e6abc9d746a..56a3f1766aab 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml @@ -18,8 +18,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - spi-cpha: true reset-gpios: @@ -32,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml index 2876397fc668..55c2c73626f4 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml @@ -28,8 +28,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - spi-cpha: true clocks: @@ -120,7 +118,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml index b8c398187d5c..f75b2c702986 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml @@ -19,8 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: Supply the 2.5V or 5V reference voltage @@ -32,7 +30,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml index a0af4b24877f..f26fdbc15f84 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml @@ -25,13 +25,14 @@ properties: description: Optional external reference. If not supplied, assume REFSEL input tied low to enable the internal reference. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml index 6c2539b3d707..314d1d99bf73 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml @@ -21,8 +21,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true "#io-channel-cells": @@ -33,7 +31,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml index 601d69971d84..0b48814c0dc2 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml @@ -23,8 +23,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - "#io-channel-cells": const: 1 @@ -59,7 +57,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | -- cgit v1.2.3 From 5f72930016202ca44ef0f4502d14e9054fbb3644 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 16 Aug 2022 15:43:13 +0300 Subject: dt-bindings: iio: accel: use spi-peripheral-props.yaml Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-3-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml | 5 ++++- Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml | 5 ++++- Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml | 7 ++++--- 14 files changed, 56 insertions(+), 38 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml index 6f8f8a6258fe..7332442e5661 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml @@ -27,15 +27,16 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml index 8d829ef878bc..f6f97164c2ca 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml @@ -25,14 +25,15 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml index d6afc1b8c272..05fa7af409cc 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml @@ -24,8 +24,6 @@ properties: spi-3wire: true - spi-max-frequency: true - vs-supply: description: Regulator that supplies power to the accelerometer @@ -48,7 +46,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index 9bb039e2f533..346abfb13a3a 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -32,8 +32,6 @@ properties: spi-cpol: true - spi-max-frequency: true - interrupts: maxItems: 1 @@ -42,7 +40,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml index ba54d6998f2e..14b487088ab4 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml @@ -45,13 +45,14 @@ properties: vddio-supply: description: Regulator that provides power to the bus - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml index d259e796c1d6..f10d98d34cb8 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml @@ -35,8 +35,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -45,7 +43,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml index 38b59b6454ce..73a5c8f814cc 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml @@ -25,14 +25,15 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml index 942b23ad0712..5dd06f5905b4 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml @@ -20,8 +20,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdda-supply: true vddd-supply: true vddio-supply: true @@ -30,7 +28,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml index 478e75ae0885..457a709b583c 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml @@ -72,7 +72,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml index 272eb48eef5a..3cb82576d758 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml @@ -24,8 +24,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -50,7 +48,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml index 9c7c66feeffc..c8659c5eba2a 100644 --- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml +++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml @@ -39,13 +39,14 @@ properties: - "INT1" - "INT2" - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml index 390b87242fcb..f64d99b35492 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml @@ -29,13 +29,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml index f6e2a16a710b..00c990caa1e4 100644 --- a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml +++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml @@ -29,7 +29,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml index ad529ab2c6e2..65ce8ea14b52 100644 --- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml @@ -27,8 +27,6 @@ properties: vdd-supply: description: phandle to the regulator that provides power to the accelerometer - spi-max-frequency: true - interrupts: maxItems: 1 @@ -44,7 +42,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | -- cgit v1.2.3 From 1deca207e1544a1683e300cd6c3a71e46c7b58ef Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 16 Aug 2022 15:43:14 +0300 Subject: dt-bindings: iio: amplifiers: adi,ada4250: use spi-peripheral-props.yaml Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-4-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml index 5277479be382..c15da155d300 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml @@ -27,14 +27,15 @@ properties: Enable internal buffer to drive the reference pin. type: boolean - spi-max-frequency: true - required: - compatible - reg - avdd-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | -- cgit v1.2.3 From 25d0469946c3b528c34ef517dd57f6d4b5595e99 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 16 Aug 2022 15:43:15 +0300 Subject: dt-bindings: iio: dac: use spi-peripheral-props.yaml Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-5-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml | 7 +++---- Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml | 7 +++---- Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml | 9 +++++---- Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml | 7 +++---- Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml | 9 +++++---- Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml | 9 +++++---- Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml | 9 +++++---- Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml | 4 ++-- Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml | 7 +++---- Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml | 7 +++---- Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml | 9 +++++---- Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml | 7 +++---- Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml | 9 +++++---- Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml | 9 +++++---- Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml | 7 ++++--- 18 files changed, 71 insertions(+), 66 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml index 05ed4e0ec364..c04165fa9259 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml @@ -95,15 +95,12 @@ properties: vrefD-supply: true vref-supply: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - # Shared external vref, no internal reference if: properties: @@ -232,6 +229,8 @@ allOf: - vrefA-supply - vrefB-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml index 65f86f26947c..86e2884cdfb1 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml @@ -28,10 +28,6 @@ properties: vref1-supply: true vref2-supply: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg @@ -39,6 +35,7 @@ required: - vref1-supply allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -63,6 +60,8 @@ allOf: required: - vref2-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml index d599b418a020..ff50c72c62b5 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml @@ -39,14 +39,15 @@ properties: description: If not supplied devices will use internal regulators. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml index 188f656617e3..52d089ebde95 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml @@ -26,13 +26,14 @@ properties: maxItems: 1 description: Fault signal. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml index 044332c97743..d2af2d491986 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml @@ -27,19 +27,16 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - VREF-supply: true VREFA-supply: true VREFB-supply: true -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -72,6 +69,8 @@ allOf: - VREFA-supply - VREFB-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml index 330383b85eeb..4d5111a5f9bd 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml @@ -22,17 +22,18 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: If not present, internal reference will be used. -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml index 5c26441eae9f..13f214234b8e 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml @@ -53,14 +53,15 @@ properties: vcc-supply: description: If not supplied the internal reference is used. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml index f866b88e1440..9a3c2926bf85 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml @@ -25,8 +25,6 @@ properties: description: Either this or spi-cpol but not both. spi-cpol: true - spi-max-frequency: true - adi,ext-dc-dc-compenstation-resistor: $ref: /schemas/types.yaml#/definitions/flag description: @@ -67,8 +65,6 @@ required: - compatible - reg -additionalProperties: false - patternProperties: "^channel@[0-7]$": type: object @@ -123,6 +119,11 @@ oneOf: - required: - spi-cpol +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml index fd4edca34a28..e49e7556175d 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml @@ -16,7 +16,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true adi,dc-dc-mode: @@ -99,6 +98,7 @@ required: - adi,dc-dc-mode allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: adi,dc-dc-mode: @@ -115,7 +115,7 @@ allOf: required: - adi,range-microvolt -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml index 7f95a9ed55fe..df550b5af2f7 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml @@ -22,18 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: If not supplied, internal reference will be used. -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -45,6 +42,8 @@ allOf: required: - vref-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml index 8e893d52bfb1..0b409a727a43 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml @@ -22,18 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vrefAB-supply: true vrefCD-supply: true -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -46,6 +43,8 @@ allOf: - vrefAB-supply - vrefCD-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml index 24ac40180ac1..ca5432ffdedb 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -49,8 +49,6 @@ properties: asserted during driver probe. maxItems: 1 - spi-max-frequency: true - '#address-cells': const: 1 @@ -138,7 +136,10 @@ required: - channel@4 - channel@5 -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml index 650d1ebdcec3..3a84739736f6 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml @@ -23,19 +23,20 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vss-supply: true -additionalProperties: false - required: - compatible - reg - vdd-supply - vss-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml index 6a3990a8d0ad..1849a2ff05c7 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml @@ -19,19 +19,16 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vrefh-supply: true vrefl-supply: true -additionalProperties: false - required: - compatible - reg - vrefh-supply allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -44,6 +41,8 @@ allOf: properties: vrefl-supply: false +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml index 4c430abcdbf9..19374401e509 100644 --- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml +++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml @@ -21,17 +21,18 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true -additionalProperties: false - required: - compatible - reg - vref-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml index b0157050f1ee..201b04af2b22 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml @@ -33,21 +33,22 @@ properties: vref-supply: description: Needed to provide output scaling. - spi-max-frequency: true - required: - compatible - reg - vref-supply -additionalProperties: false - oneOf: - required: - spi-cpha - required: - spi-cpol +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | vref_2v5_reg: regulator-vref { diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml index 10be98d1f19c..a6814587dbc4 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml @@ -24,14 +24,15 @@ properties: Reference voltage must be supplied to establish the scaling of the output voltage. - spi-max-frequency: true - required: - compatible - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml index d172b142f6ed..20dd1370660d 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml @@ -29,13 +29,14 @@ properties: DACs are loaded when the pin connected to this GPIO is pulled low. maxItems: 1 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | -- cgit v1.2.3 From 3e03f90fe0b6d08142e0934eb7db6c26a509b505 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 16 Aug 2022 15:43:16 +0300 Subject: dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-6-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/frequency/adf4371.yaml | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml index 6b3a611e1cf1..0144f74a4768 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml @@ -40,15 +40,16 @@ properties: output stage will shut down until the ADF4371/ADF4372 achieves lock as measured by the digital lock detect circuitry. - spi-max-frequency: true - required: - compatible - reg - clocks - clock-names -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | -- cgit v1.2.3 From d9ca9d28068a151471141dd1b0ddbf272c2364ac Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 16 Aug 2022 15:43:17 +0300 Subject: dt-bindings: iio: health: ti,afe4403: use spi-peripheral-props.yaml Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-7-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml index d861526c5c42..6c5ad426a016 100644 --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml @@ -25,14 +25,15 @@ properties: reset-gpios: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include -- cgit v1.2.3 From 8d98a8c6b0520aeaef1f0be6cbcadece65f855e9 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 16 Aug 2022 15:43:18 +0300 Subject: dt-bindings: iio: imu: use spi-peripheral-props.yaml Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-8-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml | 9 +++++---- Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml | 7 ++++--- .../devicetree/bindings/iio/imu/invensense,icm42600.yaml | 6 ++++-- .../devicetree/bindings/iio/imu/invensense,mpu6050.yaml | 5 ++--- Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml | 7 ++++--- Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 9 +++++---- 7 files changed, 28 insertions(+), 22 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml index 340be256f283..d166dbca18c3 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml @@ -25,8 +25,6 @@ properties: spi-cpol: true - spi-max-frequency: true - interrupts: maxItems: 1 @@ -35,7 +33,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml index dd29dc6c4c19..56e0dc20f5e4 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml @@ -47,8 +47,6 @@ properties: - DIO3 - DIO4 - spi-max-frequency: true - spi-cpha: true spi-cpol: true @@ -96,8 +94,6 @@ properties: - DIO3 - DIO4 -additionalProperties: false - required: - compatible - reg @@ -106,6 +102,11 @@ required: - spi-cpol - spi-max-frequency +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml index 6e73cd889b5c..a0760382548d 100644 --- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml @@ -46,13 +46,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index 4c1c083d0e92..488349755c99 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -47,7 +47,6 @@ properties: vddio-supply: description: Regulator that provides power to the bus - spi-max-frequency: true spi-cpha: true spi-cpol: true @@ -56,7 +55,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 3ebc6526d82d..ec64d7877fe5 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -40,8 +40,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -54,6 +52,7 @@ properties: These devices also support an auxiliary i2c bus via an i2c-gate. allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: not: properties: @@ -67,7 +66,7 @@ allOf: properties: i2c-gate: false -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml index 0203b83b8587..24416b59b782 100644 --- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml +++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml @@ -36,13 +36,14 @@ properties: drive-open-drain: type: boolean - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index 5d4839f00898..0ceb29fb01b7 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -45,8 +45,6 @@ properties: description: Supports up to 2 interrupt lines via the INT1 and INT2 pins. - spi-max-frequency: true - vdd-supply: description: if defined provides VDD power to the sensor. @@ -81,12 +79,15 @@ properties: wakeup-source: $ref: /schemas/types.yaml#/definitions/flag -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include -- cgit v1.2.3 From efcdb1ab5030f231e377ac241fda83e1d3a126ed Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 16 Aug 2022 15:43:19 +0300 Subject: dt-bindings: iio: potentiometer: use spi-peripheral-props.yaml Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-9-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- .../bindings/iio/potentiometer/microchip,mcp41010.yaml | 9 +++++---- .../devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml | 9 +++++---- 2 files changed, 10 insertions(+), 8 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml index 567697d996ec..87e88f2a9908 100644 --- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml +++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml @@ -25,14 +25,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml index 32e92bced81f..896fe0b5edcc 100644 --- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml +++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml @@ -80,14 +80,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { -- cgit v1.2.3 From 6920f48efd58596af8e58ad5c861bd15726165e7 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 16 Aug 2022 15:43:20 +0300 Subject: dt-bindings: iio: samsung,sensorhub-rinato: use spi-peripheral-props.yaml Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-10-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/iio/samsung,sensorhub-rinato.yaml | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml index a88b3b14d6bd..dd2ae2bd1ad7 100644 --- a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml +++ b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml @@ -40,10 +40,6 @@ properties: description: Reset the sensorhub. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg @@ -52,6 +48,11 @@ required: - mcu-ap-gpios - mcu-reset-gpios +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { -- cgit v1.2.3 From 14a4d22ead0d9c01a6d7e9cb7f1d321dd29d354b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 16 Aug 2022 15:43:21 +0300 Subject: dt-bindings: iio: temperature: use spi-peripheral-props.yaml Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-11-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/iio/temperature/maxim,max31855k.yaml | 4 ++-- .../devicetree/bindings/iio/temperature/maxim,max31856.yaml | 6 ++++-- .../devicetree/bindings/iio/temperature/maxim,max31865.yaml | 6 ++++-- 3 files changed, 10 insertions(+), 6 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml index 9969bac66aa1..0805ed7e2113 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml @@ -32,7 +32,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true required: @@ -40,6 +39,7 @@ required: - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -53,7 +53,7 @@ allOf: properties: spi-cpha: false -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml index 873b34766676..228a94165487 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml @@ -19,7 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true thermocouple-type: @@ -34,7 +33,10 @@ required: - reg - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml index aafb33b16549..a2823ed6867b 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml @@ -25,7 +25,6 @@ properties: enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection. type: boolean - spi-max-frequency: true spi-cpha: true required: @@ -33,7 +32,10 @@ required: - reg - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | -- cgit v1.2.3 From 8559e62ccb4b0b77eb33496d9984ce05f0b756bb Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 21 Jul 2022 15:27:14 -0600 Subject: dt-bindings: arm: coresight: Add 'power-domains' property Coresight components may be in a power domain which is the case for the Arm Juno board. Allow a single 'power-domains' entry for Coresight components. Signed-off-by: Rob Herring Reviewed-by: Sudeep Holla Link: https://lore.kernel.org/r/20220721212718.1980905-1-robh@kernel.org Signed-off-by: Mathieu Poirier --- Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml | 3 +++ Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml | 3 +++ .../devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml | 3 +++ .../devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml | 3 +++ Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml | 3 +++ Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml | 3 +++ Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml | 3 +++ .../devicetree/bindings/arm/arm,coresight-static-replicator.yaml | 3 +++ Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml | 3 +++ Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml | 3 +++ Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml | 3 +++ .../devicetree/bindings/arm/arm,embedded-trace-extension.yaml | 3 +++ 12 files changed, 36 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml index d783d9276124..2bae06eed693 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml @@ -61,6 +61,9 @@ properties: maxItems: 1 description: Address translation error interrupt + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml index 72ffe4d1e948..0c5b875cb654 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml @@ -98,6 +98,9 @@ properties: base cti node if compatible string arm,coresight-cti-v8-arch is used, or may appear in a trig-conns child node when appropriate. + power-domains: + maxItems: 1 + arm,cti-ctm-id: $ref: /schemas/types.yaml#/definitions/uint32 description: diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml index 1eeedc22857c..44a1041cb0fc 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml @@ -54,6 +54,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml index a26ed9214e00..03792e9bd97a 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml @@ -54,6 +54,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + qcom,replicator-loses-context: type: boolean description: diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml index fd06ede26ceb..90679788e0bf 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml @@ -54,6 +54,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml index e0377ce48537..01200f67504a 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml @@ -73,6 +73,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + arm,coresight-loses-context-with-cpu: type: boolean description: diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml index 374083956b20..cc8c3baa79b4 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml @@ -27,6 +27,9 @@ properties: compatible: const: arm,coresight-static-funnel + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml index a34d8583830c..1892a091ac35 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml @@ -27,6 +27,9 @@ properties: compatible: const: arm,coresight-static-replicator + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml index 905008faa012..378380c3f5aa 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml @@ -61,6 +61,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + out-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml index 3463b6e53aef..e0b88a71356a 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml @@ -55,6 +55,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + arm,buffer-size: $ref: /schemas/types.yaml#/definitions/uint32 deprecated: true diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml index e80d48200c37..61a0cdc27745 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml @@ -54,6 +54,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml index 5f07fb166c56..108460627d9a 100644 --- a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml +++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml @@ -33,6 +33,9 @@ properties: Handle to the cpu this ETE is bound to. $ref: /schemas/types.yaml#/definitions/phandle + power-domains: + maxItems: 1 + out-ports: description: | Output connections from the ETE to legacy CoreSight trace bus. -- cgit v1.2.3 From 84fa8f159022aab8e93667b56672238b10cdbb9b Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 21 Jul 2022 15:27:15 -0600 Subject: dt-bindings: arm: coresight-tmc: Add 'iommu' property The Coresight TMC component may be behind an IOMMU which is the case for the Arm Juno SoC and some Qualcomm SoCs. Add 'iommus' property to the binding. Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220721212718.1980905-2-robh@kernel.org Signed-off-by: Mathieu Poirier --- Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml index e0b88a71356a..cb8dceaca70e 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml @@ -55,6 +55,9 @@ properties: - const: apb_pclk - const: atclk + iommus: + maxItems: 1 + power-domains: maxItems: 1 -- cgit v1.2.3 From 4905949395850e41912ae89e2d2fa88d2cd36319 Mon Sep 17 00:00:00 2001 From: Dmitry Rokosov Date: Mon, 22 Aug 2022 17:49:24 +0000 Subject: dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd. MEMSensing Microsystems (Suzhou, China) Co., Ltd. operates as a micro electromechanical system technology company which produces micro electromechanical system microphones and sensors. MEMSensing Microsystems (Suzhou, China) Co., Ltd. applies its products in consumer electronics, industrial control, medical electronics and automotive, and other fields. Signed-off-by: Dmitry Rokosov Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220822175011.2886-3-ddrokosov@sberdevices.ru Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 2f0151e9f6be..b1818b4eb972 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -777,6 +777,8 @@ patternProperties: description: MELFAS Inc. "^mellanox,.*": description: Mellanox Technologies + "^memsensing,.*": + description: MEMSensing Microsystems Co., Ltd. "^memsic,.*": description: MEMSIC Inc. "^menlo,.*": -- cgit v1.2.3 From 4eba8239c8ce419e53813d02251a46c27597fe73 Mon Sep 17 00:00:00 2001 From: Dmitry Rokosov Date: Mon, 22 Aug 2022 17:49:26 +0000 Subject: dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver Introduce devicetree binding json-schema for MSA311 tri-axial, low-g accelerometer driver. Signed-off-by: Dmitry Rokosov Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220822175011.2886-5-ddrokosov@sberdevices.ru Signed-off-by: Jonathan Cameron --- .../bindings/iio/accel/memsensing,msa311.yaml | 53 ++++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml new file mode 100644 index 000000000000..23528dcaa073 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MEMSensing digital 3-Axis accelerometer + +maintainers: + - Dmitry Rokosov + +description: | + MSA311 is a tri-axial, low-g accelerometer with I2C digital output for + sensitivity consumer applications. It has dynamical user selectable full + scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements + with output data rates from 1Hz to 1000Hz. + Datasheet can be found at following URL + https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf + +properties: + compatible: + const: memsensing,msa311 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@62 { + compatible = "memsensing,msa311"; + reg = <0x62>; + interrupt-parent = <&gpio_intc>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&vcc_5v>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index b8a621941db9..00cf4a00bb6d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13180,6 +13180,7 @@ MEMSENSING MICROSYSTEMS MSA311 DRIVER M: Dmitry Rokosov L: linux-iio@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml F: drivers/iio/accel/msa311.c MEN A21 WATCHDOG DRIVER -- cgit v1.2.3 From c682c96334cb790930c814e58e33d5e0df600a63 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 23 Aug 2022 09:56:33 -0500 Subject: dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically). Signed-off-by: Rob Herring Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220823145649.3118479-2-robh@kernel.org Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml | 1 + Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 ++ Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml | 1 + Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml | 1 + Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml | 1 + Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml | 1 + Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml | 4 ++++ Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml | 1 + 8 files changed, 12 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 74a4a9d95798..8bac0c4120dd 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -58,6 +58,7 @@ required: patternProperties: "^.*@[0-9a-f]+$": type: object + additionalProperties: false description: | Represents the external channels which are connected to the ADC. For compatible property "qcom,spmi-vadc" following channels, also known as diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 92f9472a77ae..1970503389aa 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -72,6 +72,7 @@ additionalProperties: false patternProperties: "^filter@[0-9]+$": type: object + unevaluatedProperties: false description: child node properties: @@ -225,6 +226,7 @@ patternProperties: patternProperties: "^dfsdm-dai+$": type: object + additionalProperties: false description: child node properties: diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml index a3b79438a13a..2c3c2cf2145c 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -43,6 +43,7 @@ additionalProperties: false patternProperties: "^channel@[0-7]+$": type: object + additionalProperties: false description: Child nodes needed for each channel that the platform uses. diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml index 3698b4b0900f..be93c109d6ac 100644 --- a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml @@ -134,6 +134,7 @@ properties: ams-pl@400: type: object + additionalProperties: false description: PL-SYSMON is capable of monitoring off chip voltage and temperature. PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml index baa65a521bad..03bb90a7f4f8 100644 --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml @@ -63,6 +63,7 @@ additionalProperties: false patternProperties: "^channel@[0-3]$": type: object + additionalProperties: false description: Represents the external channels which are connected to the device. properties: diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml index 9c48c76993fe..fee0f023a8c8 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml @@ -78,6 +78,7 @@ patternProperties: custom-output-range-config: type: object + additionalProperties: false description: Configuration of custom range when adi,output-range-microvolt is not present. The formulas for calculation the output voltages are diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml index ca5432ffdedb..8e7da0de918f 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -60,6 +60,7 @@ properties: connected to the DAC. Channel 0 can act both as a current source and sink. type: object + additionalProperties: false properties: reg: @@ -83,6 +84,7 @@ properties: description: Represents an external channel which are connected to the DAC. type: object + additionalProperties: false properties: reg: @@ -99,6 +101,7 @@ properties: description: Represents an external channel which are connected to the DAC. type: object + additionalProperties: false properties: reg: @@ -114,6 +117,7 @@ properties: patternProperties: "^channel@([3-5])$": type: object + additionalProperties: false description: Represents the external channels which are connected to the DAC. properties: reg: diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml index 48f9e7d29423..15cc6bf59b13 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml @@ -48,6 +48,7 @@ properties: patternProperties: "^channel@([0-9]|1[0-5])$": type: object + additionalProperties: false properties: reg: -- cgit v1.2.3 From 6cda6aa83c0b548471bc30cc2083fe5fd255591b Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Sun, 4 Sep 2022 12:02:01 +0200 Subject: dt-bindings: iio: adc: ti,tsc2046: add vref-supply property Add property for the voltage reference supply. Signed-off-by: Oleksij Rempel Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220904100203.3614502-1-o.rempel@pengutronix.de Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml index 0b48814c0dc2..bdf3bba2d750 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml @@ -23,6 +23,9 @@ properties: interrupts: maxItems: 1 + vref-supply: + description: Optional supply of the reference voltage + "#io-channel-cells": const: 1 -- cgit v1.2.3 From 5a80c2572f5e40fc106fe9f372964935798dc637 Mon Sep 17 00:00:00 2001 From: Ramona Bolboaca Date: Wed, 31 Aug 2022 16:30:20 +0300 Subject: dt-bindings: iio: adc: Add max11205 documentation file Add bindings documentation file and MAINTAINERS entry for MAX11205. Signed-off-by: Ramona Bolboaca Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220831133021.215625-1-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron --- .../bindings/iio/adc/maxim,max11205.yaml | 69 ++++++++++++++++++++++ MAINTAINERS | 8 +++ 2 files changed, 77 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml new file mode 100644 index 000000000000..5f9e043cf5cd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX11205 ADC + +maintainers: + - Ramona Bolboaca + +description: | + The MAX11205 is an ultra-low-power (< 300FA max active current), + high-resolution, serial-output ADC. + + https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - maxim,max11205a + - maxim,max11205b + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + spi-cpha: true + + vref-supply: + description: + The regulator supply for the ADC reference voltage. This is a differential + reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V. + +required: + - compatible + - reg + - interrupts + - spi-max-frequency + - spi-cpha + - vref-supply + +unevaluatedProperties: false + +examples: + - | + #include + spi { + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "maxim,max11205a"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + interrupt-parent = <&gpio>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + vref-supply = <&max11205_vref>; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index d9c8596ee28b..17bdf4398391 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12332,6 +12332,14 @@ S: Maintained F: Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml F: drivers/iio/proximity/mb1232.c +MAXIM MAX11205 DRIVER +M: Ramona Bolboaca +L: linux-iio@vger.kernel.org +S: Supported +W: https://ez.analog.com/linux-software-drivers +F: Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml +F: drivers/iio/adc/max11205.c + MAXIM MAX17040 FAMILY FUEL GAUGE DRIVERS R: Iskren Chernev R: Krzysztof Kozlowski -- cgit v1.2.3 From b402783711bfe93e9da0e3f9eab3aee95cece29d Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Fri, 9 Sep 2022 17:16:09 +0100 Subject: dt-bindings: iio: st,st-sensors add LPS22DF. Add support for the ST LPS22DF, an I2C/SPI pressure sensor. Signed-off-by: Martyn Welch Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220909161611.780720-1-martyn.welch@collabora.co.uk Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/st,st-sensors.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index fcb2902683c7..250439b13152 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -73,6 +73,7 @@ properties: - description: STMicroelectronics Pressure Sensors enum: - st,lps001wp-press + - st,lps22df - st,lps22hb-press - st,lps22hh - st,lps25h-press @@ -141,6 +142,7 @@ allOf: - st,lis2mdl - st,lis3l02dq - st,lis3lv02dl-accel + - st,lps22df - st,lps22hb-press - st,lps22hh - st,lps25h-press -- cgit v1.2.3 From abf90541d19c17a29bf6137febe71bb2770896f3 Mon Sep 17 00:00:00 2001 From: George Mois Date: Mon, 5 Sep 2022 16:20:17 +0300 Subject: dt-bindings: iio: accel: adxl313: Add compatibles for adxl312 and adxl314 Extend the adi,adxl313.yaml file with information regrding the ADXL312 and ADXL314 devices. Signed-off-by: George Mois Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220905132018.364900-1-george.mois@analog.com Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml index 05fa7af409cc..185b68ffb536 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml @@ -4,20 +4,24 @@ $id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices ADXL313 3-Axis Digital Accelerometer +title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers maintainers: - Lucas Stankus description: | - Analog Devices ADXL313 3-Axis Digital Accelerometer that supports - both I2C & SPI interfaces. + Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that + support both I2C & SPI interfaces. + https://www.analog.com/en/products/adxl312.html https://www.analog.com/en/products/adxl313.html + https://www.analog.com/en/products/adxl314.html properties: compatible: enum: + - adi,adxl312 - adi,adxl313 + - adi,adxl314 reg: maxItems: 1 -- cgit v1.2.3 From 2a332dcd68aff25b5177b5e4196b4d46403ba364 Mon Sep 17 00:00:00 2001 From: Angel Iglesias Date: Tue, 13 Sep 2022 01:53:50 +0200 Subject: dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string Add bosch,bmp380 compatible string for the new family of sensors. This family includes the BMP380, BMP384 and BMP388. The register map in this family changes substantially and introduces new features but core concepts and operations carryover from the previous iterations Signed-off-by: Angel Iglesias Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/67224da4ae308bb752fc8fdecc54345cedab6c21.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/pressure/bmp085.yaml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml index 49257f9251e8..72cd2c2d3f17 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: BMP085/BMP180/BMP280/BME280 pressure iio sensors +title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors maintainers: - Andreas Klinger @@ -16,6 +16,7 @@ description: | https://www.bosch-sensortec.com/bst/products/all_products/bmp180 https://www.bosch-sensortec.com/bst/products/all_products/bmp280 https://www.bosch-sensortec.com/bst/products/all_products/bme280 + https://www.bosch-sensortec.com/bst/products/all_products/bmp380 properties: compatible: @@ -24,6 +25,7 @@ properties: - bosch,bmp180 - bosch,bmp280 - bosch,bme280 + - bosch,bmp380 reg: maxItems: 1 -- cgit v1.2.3 From 14446b4dc2780e86d93f20732c05a8e38eec0ff7 Mon Sep 17 00:00:00 2001 From: Ciprian Regus Date: Fri, 16 Sep 2022 17:09:19 +0300 Subject: dt-bindings: iio: adc: Add docs for LTC2499 Update the bindings documentation for ltc2497 to include the ltc2499. Signed-off-by: Ciprian Regus Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220916140922.2506248-3-ciprian.regus@analog.com Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml index c1772b568cd1..875f394576c2 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml @@ -13,10 +13,14 @@ description: | 16bit ADC supporting up to 16 single ended or 8 differential inputs. I2C interface. + https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf + properties: compatible: - const: - lltc,ltc2497 + enum: + - lltc,ltc2497 + - lltc,ltc2499 reg: true vref-supply: true -- cgit v1.2.3 From fd8059ec60193c11e3237bbf86dff4f51946c94e Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Thu, 15 Sep 2022 19:35:00 +0200 Subject: dt-bindings: iio: imu: st_lsm6dsx: add lsm6dstx device bindings Add device bindings for lsm6dstx IMU sensor. Use lsm6dst as fallback device for lsm6dstx since it implements all the features currently supported by lsm6dstx. Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/dadc2acf88b0b73feac9a8980ad9af1658297bc1.1663262890.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index 0ceb29fb01b7..fe1e02e5d7b3 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -35,6 +35,9 @@ properties: - items: - const: st,asm330lhhx - const: st,lsm6dsr + - items: + - const: st,lsm6dstx + - const: st,lsm6dst reg: maxItems: 1 -- cgit v1.2.3 From 4b622a658c21d4de7f6fdb6b5e1c99bfb20b2d22 Mon Sep 17 00:00:00 2001 From: Nuno Sá Date: Mon, 12 Sep 2022 10:12:23 +0200 Subject: dt-bindings: iio: adi,ad7923: add adi,range-double property Document the new property to enable doubling the analog input range. Signed-off-by: Nuno Sá Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220912081223.173584-4-nuno.sa@analog.com Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml index 40b0a887db57..07f9d1c09c7d 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml @@ -36,6 +36,10 @@ properties: description: | The regulator supply for ADC reference voltage. + adi,range-double: + description: Sets the analog input range from 0 to 2xVREF. + type: boolean + '#address-cells': const: 1 -- cgit v1.2.3 From 21f95c75e0b7e77370177173c67d0931d4020e78 Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Wed, 7 Sep 2022 15:22:02 +0200 Subject: dt-bindings: iio/imu: Add Bosch BNO055 Introduce new documentation file for the Bosch BNO055 IMU. Signed-off-by: Andrea Merello Reviewed-by: Rob Herring Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220907132205.28021-12-andrea.merello@iit.it Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/iio/imu/bosch,bno055.yaml | 59 ++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml new file mode 100644 index 000000000000..e0d06db161a9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/bosch,bno055.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BNO055 + +maintainers: + - Andrea Merello + +description: | + Inertial Measurement Unit with Accelerometer, Gyroscope, Magnetometer and + internal MCU for sensor fusion + https://www.bosch-sensortec.com/products/smart-sensors/bno055/ + +properties: + compatible: + enum: + - bosch,bno055 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include + serial { + imu { + compatible = "bosch,bno055"; + reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>; + clocks = <&imu_clk>; + }; + }; + + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@28 { + compatible = "bosch,bno055"; + reg = <0x28>; + reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>; + clocks = <&imu_clk>; + }; + }; -- cgit v1.2.3 From 1a84fa695c7385b4f5547795149cb0bdd1073be8 Mon Sep 17 00:00:00 2001 From: Marcus Folkesson Date: Mon, 15 Aug 2022 08:16:23 +0200 Subject: dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry The Data Ready Output Pin is either hard wired to work as high impedance or push-pull. Make it configurable. Signed-off-by: Marcus Folkesson Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220815061625.35568-8-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 067a7bbadab8..2c93fb41f172 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -36,6 +36,13 @@ properties: description: IRQ line of the ADC maxItems: 1 + microchip,data-ready-hiz: + description: + Data Ready Pin Inactive State Control + true = The DR pin state is high-impedance + false = The DR pin state is logic high + type: boolean + microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. $ref: /schemas/types.yaml#/definitions/uint32 -- cgit v1.2.3 From ff1df1886f43365f2333770f89a7b435424897f4 Mon Sep 17 00:00:00 2001 From: Johnson Wang Date: Fri, 16 Sep 2022 13:20:51 +0100 Subject: dt-bindings: nvmem: mediatek: efuse: Add support for MT8188 Add compatible for MT8188 SoC. Acked-by: Krzysztof Kozlowski Signed-off-by: Johnson Wang Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122100.170016-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index b5a1109f2ee1..75e0a516e59a 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -30,6 +30,7 @@ properties: - mediatek,mt8173-efuse - mediatek,mt8183-efuse - mediatek,mt8186-efuse + - mediatek,mt8188-efuse - mediatek,mt8192-efuse - mediatek,mt8195-efuse - mediatek,mt8516-efuse -- cgit v1.2.3 From 105ca4190dcf15903cc2b503df7ce473715c432f Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 16 Sep 2022 13:20:53 +0100 Subject: dt-bindings: nvmem: qfprom: add IPQ8064 and SDM630 compatibles Document compatibles for QFPROM used on IPQ8064 and SDM630. They are compatible with generic QFPROM fallback. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122100.170016-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index dede8892ee01..b4163086a5be 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -18,6 +18,7 @@ properties: - enum: - qcom,apq8064-qfprom - qcom,apq8084-qfprom + - qcom,ipq8064-qfprom - qcom,msm8974-qfprom - qcom,msm8916-qfprom - qcom,msm8996-qfprom @@ -25,6 +26,7 @@ properties: - qcom,qcs404-qfprom - qcom,sc7180-qfprom - qcom,sc7280-qfprom + - qcom,sdm630-qfprom - qcom,sdm845-qfprom - const: qcom,qfprom -- cgit v1.2.3 From 8f6a3a19e99cdb52b0ff0d2d3197e810258b6e46 Mon Sep 17 00:00:00 2001 From: Iskren Chernev Date: Fri, 16 Sep 2022 13:20:56 +0100 Subject: dt-bindings: nvmem: Add SoC compatible for sm6115 Document SoC compatible for sm6115. Reviewed-by: Caleb Connolly Acked-by: Krzysztof Kozlowski Signed-off-by: Iskren Chernev Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122100.170016-10-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index b4163086a5be..2eab2f46cb65 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -28,6 +28,7 @@ properties: - qcom,sc7280-qfprom - qcom,sdm630-qfprom - qcom,sdm845-qfprom + - qcom,sm6115-qfprom - const: qcom,qfprom reg: -- cgit v1.2.3 From d1b274c4819deed7673e5edec12fea1e57110ad8 Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Fri, 16 Sep 2022 13:20:58 +0100 Subject: dt-bindings: lan9662-otpc: document Lan9662 OTPC Document Lan9662 OTP controller. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Horatiu Vultur Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122100.170016-12-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- .../bindings/nvmem/microchip,lan9662-otpc.yaml | 45 ++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml new file mode 100644 index 000000000000..f97c6beb4766 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/microchip,lan9662-otpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip LAN9662 OTP Controller (OTPC) + +maintainers: + - Horatiu Vultur + +description: | + OTP controller drives a NVMEM memory where system specific data + (e.g. hardware configuration settings, chip identifiers) or + user specific data could be stored. + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + oneOf: + - items: + - const: microchip,lan9668-otpc + - const: microchip,lan9662-otpc + - enum: + - microchip,lan9662-otpc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + otpc: otp@e0021000 { + compatible = "microchip,lan9662-otpc"; + reg = <0xe0021000 0x300>; + }; + +... -- cgit v1.2.3 From 8d4c99002d2f38edd50a9896a29a1650be3de1af Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 9 Aug 2022 15:06:59 -0500 Subject: dt-bindings: hwmon: Add IBM OCC bindings These bindings describe the POWER processor On Chip Controller accessed from a service processor or baseboard management controller (BMC). Signed-off-by: Eddie James Link: https://lore.kernel.org/r/20220809200701.218059-2-eajames@linux.ibm.com Signed-off-by: Joel Stanley --- .../devicetree/bindings/hwmon/ibm,occ-hwmon.yaml | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml new file mode 100644 index 000000000000..3dbdc5af2804 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM On-Chip Controller (OCC) accessed from a service processor + +maintainers: + - Eddie James + +description: | + The POWER processor On-Chip Controller (OCC) helps manage power and + thermals for the system. A service processor or baseboard management + controller can query the OCC for it's power and thermal data to report + through hwmon. + +properties: + compatible: + enum: + - ibm,p9-occ-hwmon + - ibm,p10-occ-hwmon + + ibm,no-poll-on-init: + description: This property describes whether or not the OCC should + be polled during driver initialization. + type: boolean + +required: + - compatible + +additionalProperties: false + +examples: + - | + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; -- cgit v1.2.3 From b5bee6ced21ca98389000b7017dd41b0cc37fa50 Mon Sep 17 00:00:00 2001 From: Julien Panis Date: Tue, 27 Sep 2022 18:53:43 -0400 Subject: dt-bindings: counter: add ti,am62-ecap-capture.yaml This commit adds a YAML binding for TI ECAP used in capture operating mode. Signed-off-by: Julien Panis Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220923142437.271328-2-jpanis@baylibre.com/ Signed-off-by: William Breathitt Gray Link: https://lore.kernel.org/r/33c27451f61b3a01d886da5e6bf6456088956439.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman --- .../bindings/counter/ti,am62-ecap-capture.yaml | 61 ++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml new file mode 100644 index 000000000000..4e0b2d2b303e --- /dev/null +++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments Enhanced Capture (eCAP) Module + +maintainers: + - Julien Panis + +description: | + The eCAP module resources can be used to capture timestamps + on input signal events (falling/rising edges). + +properties: + compatible: + const: ti,am62-ecap-capture + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: fck + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + capture@23100000 { /* eCAP in capture mode on am62x */ + compatible = "ti,am62-ecap-capture"; + reg = <0x00 0x23100000 0x00 0x100>; + interrupts = ; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 51 0>; + clock-names = "fck"; + }; + }; -- cgit v1.2.3